Observium_CE/mibs/a3com/A3COM-HUAWEI-LswMAM-MIB

284 lines
9.6 KiB
Plaintext

-- ==================================================================
-- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Lan Switch mac management MIB
-- Reference:
-- Version: V2.3
-- History:
--(1) Created by Zhangshilin, 2001.06.29
-- V2.0 2004-10-12 updated by gaolong
-- Import TEXTUAL-CONVENTION and MODULE-IDENTITY.
-- Add hwLswMacPort MODULE-IDENTITY clause.
-- Change ACCESS to MAX-ACCESS.
-- Change MAX-ACCESS clause value from write-only to read-write.
-- V2.1 2005-03-16 by gaolong
-- Change import clause of hwdot1qVlanIndex
-- V2.2 2005-07-28 by huna kf0518
-- Add hwdot1qTpFdbGroupSetTable
-- V2.3 2005-02-25 by wangyupeng
-- Add blackhole and security for hwdot1qTpFdbSetStatus
-- ==================================================================
-- ==================================================================
--
-- Varibles and types be imported
--
-- ==================================================================
A3COM-HUAWEI-LswMAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MacAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-TYPE,Integer32, MODULE-IDENTITY
FROM SNMPv2-SMI
lswCommon
FROM A3COM-HUAWEI-OID-MIB
hwdot1qVlanIndex
FROM A3COM-HUAWEI-LswVLAN-MIB;
hwLswMacPort MODULE-IDENTITY
LAST-UPDATED "200106290000Z"
ORGANIZATION " "
CONTACT-INFO
" "
DESCRIPTION
" "
REVISION "200106290000Z"
DESCRIPTION
" "
::= { lswCommon 3 }
InterfaceIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface
or interface sub-layer in the managed system. It is
recommended that values are assigned contiguously
starting from 1. The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization."
SYNTAX Integer32
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
hwdot1qMacSearchTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1qMacSearchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information table for searching port with mac address "
::= { hwLswMacPort 1 }
hwdot1qMacSearchEntry OBJECT-TYPE
SYNTAX HwDot1qMacSearchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Information table for searching port with mac address entry "
INDEX { hwdot1qMacSearchAddress, hwdot1qMacSearchVlanID }
::= { hwdot1qMacSearchTable 1 }
HwDot1qMacSearchEntry ::=
SEQUENCE {
hwdot1qMacSearchAddress MacAddress ,
hwdot1qMacSearchVlanID INTEGER ,
hwdot1qMacSearchPort InterfaceIndex ,
hwdot1qMacSearchAgeTime INTEGER
}
hwdot1qMacSearchAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address"
::= { hwdot1qMacSearchEntry 1 }
hwdot1qMacSearchVlanID OBJECT-TYPE
SYNTAX INTEGER (-1 | 1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VLANID of the native VLAN of the MAC address to be searched for "
::= { hwdot1qMacSearchEntry 2 }
hwdot1qMacSearchPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index corresponding to the MAC address"
::= { hwdot1qMacSearchEntry 3 }
hwdot1qMacSearchAgeTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Address aging time"
::= { hwdot1qMacSearchEntry 4 }
hwdot1qTpFdbSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1qTpFdbSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast address setting table "
::= { hwLswMacPort 2 }
hwdot1qTpFdbSetEntry OBJECT-TYPE
SYNTAX HwDot1qTpFdbSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Unicast address setting table entry "
INDEX { hwdot1qVlanIndex, hwdot1qTpFdbSetAddress }
::= { hwdot1qTpFdbSetTable 1 }
HwDot1qTpFdbSetEntry ::=
SEQUENCE {
hwdot1qTpFdbSetAddress MacAddress ,
hwdot1qTpFdbSetPort InterfaceIndex ,
hwdot1qTpFdbSetStatus INTEGER,
hwdot1qTpFdbSetOperate INTEGER
}
hwdot1qTpFdbSetAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast MAC address "
::= { hwdot1qTpFdbSetEntry 1 }
hwdot1qTpFdbSetPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface index corresponding to the MAC address "
::= { hwdot1qTpFdbSetEntry 2 }
hwdot1qTpFdbSetStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
learned(3),
static(6),
dynamic(7),
blackhole(9),
security(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State corresponding to the MAC address"
::= { hwdot1qTpFdbSetEntry 3 }
hwdot1qTpFdbSetOperate OBJECT-TYPE
SYNTAX INTEGER {
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add or delete an MAC address. Read operation not supported."
::= { hwdot1qTpFdbSetEntry 4 }
hwdot1qTpFdbGroupSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1qTpFdbGroupSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multistcast address setting table, whose maximal row number
is dynamically changed by the influence of IGSP. When
reaching the upper limit of the table, no more row could be
added, then an error will be returned."
::= { hwLswMacPort 3 }
hwdot1qTpFdbGroupSetEntry OBJECT-TYPE
SYNTAX HwDot1qTpFdbGroupSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast address setting table entry."
INDEX { hwdot1qVlanIndex, hwdot1qTpFdbGroupSetAddress }
::= { hwdot1qTpFdbGroupSetTable 1 }
HwDot1qTpFdbGroupSetEntry ::=
SEQUENCE {
hwdot1qTpFdbGroupSetAddress MacAddress,
hwdot1qTpFdbGroupSetPort PortList,
hwdot1qTpFdbGroupSetOperate INTEGER
}
hwdot1qTpFdbGroupSetAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast MAC address."
::= { hwdot1qTpFdbGroupSetEntry 1 }
hwdot1qTpFdbGroupSetPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The complete set of ports, in this VLAN, to which
frames destined to this Multicast MAC address are currently
being explicitly forwarded. This does not include ports
for which this address is only implicitly forwarded."
::= { hwdot1qTpFdbGroupSetEntry 2 }
hwdot1qTpFdbGroupSetOperate OBJECT-TYPE
SYNTAX INTEGER {
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add or delete a Multicast MAC address. Read operation is
meaningless. When adding a Multicast MAC address, it is
required to provide MacAddress, VLAN and PortList all. For
deleting operation, MacAddress and VLAN must be provided,
but hwdot1qTpFdbGroupSetPort is optional."
::= { hwdot1qTpFdbGroupSetEntry 3 }
END