1220 lines
36 KiB
Plaintext
1220 lines
36 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
|
|
--
|
|
-- Description: flash management mib
|
|
-- Reference:
|
|
-- Version: V3.0
|
|
-- History:
|
|
-- V1.0 initial version 2002-12-20
|
|
-- V1.1 2004-6-15 add delete(4) to h3cFlhOperType
|
|
-- V1.2 2004-7-15 add some H3cFlashOperationStatus types:
|
|
-- opAuthFail(17),
|
|
-- opTimeout(18),
|
|
-- opDeleteFileOpenError(20),
|
|
-- opDeleteInvalidDevice(21),
|
|
-- opDeleteInvalidFunction(22),
|
|
-- opDeleteOperationError(23),
|
|
-- opDeleteInvalidFileName(24),
|
|
-- opDeleteDeviceBusy(25),
|
|
-- opDeleteParaError(26),
|
|
-- opDeleteInvalidPath(27)
|
|
-- V1.21 2004-8-19 modify the DESCRIPTION of h3cFlhMinPartitionSize
|
|
-- by fanxiaoxun
|
|
-- V2.0 2004-10-12 updated by gaolong
|
|
-- Fix h3cFlhMIBCompliance MODULE name to A3COM-HUAWEI-FLASH-MAN-MIB
|
|
-- V2.1 2004-11-22 modify the SYNTAX of h3cFlhSupportNum and h3cFlhIndex
|
|
-- by wangpengju
|
|
-- V2.2 2005-01-11 updated by gaolong and weixinzhe
|
|
-- File description updated
|
|
-- V2.3 2005-01-11 add 'rename' operation type for h3cFlhOperType,
|
|
-- by wangpengju
|
|
-- V2.4 2005-06-06 add enum value in SYNTAX of h3cFlhOperProtocol
|
|
-- by jinyongfeng. Adjust file format by gaolong
|
|
-- V2.5 2005-08-18 change the value range of h3cFlhFileIndex
|
|
-- from (1..32) to (1..2147483647), by wangpengju
|
|
-- V2.6 2006-03-03 updated by yangjianfeng
|
|
-- correct some error words which are obvious clerical error.
|
|
-- V2.7 2009-05-05 Add h3cFlhOperServerPort by jinyi
|
|
-- V2.8 2010-06-05 add h3cFlhOperFailReason by shuaixiaojuan
|
|
-- add h3cFlhKbyteSize by jinyi
|
|
-- V2.9 2010-10-30 Deprecated h3cFlhOperServerAddress,
|
|
-- added enum in H3cFlashOperationStatus,
|
|
-- added h3cFlhOperSrvAddrType, h3cFlhOperSrvAddrRev and
|
|
-- h3cFlhOperSrvVPNName by songhao.
|
|
-- V3.0 2011-10-13 Modify syntax of h3cFlhName and h3cFlhPartName by shuaixiaojuan.
|
|
-- =================================================================
|
|
A3COM-HUAWEI-FLASH-MAN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
PhysicalIndex
|
|
FROM ENTITY-MIB
|
|
huaweiUtility
|
|
FROM A3COM-HUAWEI-OID-MIB
|
|
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeTicks, IpAddress, Integer32, Gauge32, Counter32,
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
DisplayString, TimeStamp, TruthValue, RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
h3cFlash MODULE-IDENTITY
|
|
LAST-UPDATED "201006050000Z" -- July 01, 2002 at 00:00 GMT
|
|
ORGANIZATION
|
|
"Hangzhou H3C Tech. Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team Hangzhou H3C Tech. Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip:100085"
|
|
DESCRIPTION
|
|
"This MIB contains objects to manage flash cards and flash
|
|
card operations.
|
|
There are no constraints on this MIB."
|
|
::= { huaweiUtility 9 }
|
|
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
H3cFlashOperationStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the specified operation can be one of
|
|
the following.
|
|
|
|
opInProgress : The operation is in process.
|
|
opSuccess : The operation has been completed successfully.
|
|
opInvalid : The command is invalid or command-protocol-device
|
|
combination is unsupported by the system.
|
|
opInvalidProtocol : Invalid protocol is specified.
|
|
opInvalidSourceName : Invalid source file name is specified.
|
|
opInvalidDestName : Invalid target name is specified.
|
|
opInvalidServerAddress : Invalid server address is specified.
|
|
opDeviceBusy : The device is in use and locked by another process.
|
|
opDeviceOpenError : Invalid device name is specified.
|
|
opDeviceError : Device read, write or erase error.
|
|
opDeviceNotProgrammable : Device is read-only but a write or
|
|
erase operation was specified.
|
|
opDeviceFull : Device is filled to capacity.
|
|
opFileOpenError : Invalid file name; file not found in partition.
|
|
opFileTransferError : File transfer was unsuccessful.
|
|
opFileChecksumError : File checksum in Flash is invalid.
|
|
opNoMemory : System is running in low on memory.
|
|
opUnknownFailure : Failure which is unknown.
|
|
opDeleteFileOpenError : File is in used by another process.
|
|
opDeleteInvalidDevice : Invalid device name is specified.
|
|
opDeleteInvalidFunction : Deleted operation is unsupported
|
|
by the device.
|
|
opDeleteOperationError : Operation is in a low error.
|
|
opDeleteInvalidFileName : Invalid file name is specified.
|
|
pDeleteDeviceBusy : The device is in use and locked
|
|
by another process.
|
|
opDeleteParaError : The parameters are invalid.
|
|
opDeleteInvalidPath : The file path is invalid.
|
|
opDeleteFileNotExistInSlave : Failed to delete file, because the file
|
|
is not exist in the slave.
|
|
opDeleteFileFailedInSlave : Operation is fail when delete file in the slave.
|
|
opSlaveFull : Operation is fail for the slave don't have enough space.
|
|
opCopyToSlaveFailure : Operation is fail when copy file to the slave.
|
|
"
|
|
SYNTAX INTEGER
|
|
{
|
|
opInProgress(1),
|
|
opSuccess(2),
|
|
opInvalid(3),
|
|
opInvalidProtocol(4),
|
|
opInvalidSourceName(5),
|
|
opInvalidDestName(6),
|
|
opInvalidServerAddress(7),
|
|
opDeviceBusy(8),
|
|
opDeviceOpenError(9),
|
|
opDeviceError(10),
|
|
opDeviceNotProgrammable(11),
|
|
opDeviceFull(12),
|
|
opFileOpenError(13),
|
|
opFileTransferError(14),
|
|
opFileChecksumError(15),
|
|
opNoMemory(16),
|
|
opAuthFail(17),
|
|
opTimeout(18),
|
|
opUnknownFailure(19),
|
|
opDeleteFileOpenError(20),
|
|
opDeleteInvalidDevice(21),
|
|
opDeleteInvalidFunction(22),
|
|
opDeleteOperationError(23),
|
|
opDeleteInvalidFileName(24),
|
|
opDeleteDeviceBusy(25),
|
|
opDeleteParaError(26),
|
|
opDeleteInvalidPath(27),
|
|
opDeleteFileNotExistInSlave(28),
|
|
opDeleteFileFailedInSlave(29),
|
|
opSlaveFull(30),
|
|
opCopyToSlaveFailure(31)
|
|
}
|
|
|
|
H3cFlashPartitionUpgradeMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Flash partition upgrade method, i.e., method by which
|
|
new files can be downloaded into the partition.
|
|
FLH stands for Flash Load Helper, a feature provided
|
|
on run-from-Flash systems for upgrading Flash. This
|
|
feature uses the bootstrap code in ROMs to help in
|
|
automatic download.
|
|
This object should be retrieved if the partition
|
|
status is runFromFlash(2).
|
|
If the partition status is readOnly(1), the upgrade
|
|
method would depend on the reason for the readOnly
|
|
status. For example, it may simply be a matter of installing
|
|
the programming jumper, or it may require execution of a
|
|
later version of software that supports the Flash chips.
|
|
|
|
unknown - the current system image does not know
|
|
how Flash can be programmed. A possible
|
|
method would be to reload the ROM image
|
|
and perform the upgrade manually.
|
|
rxbootFLH - the Flash Load Helper is available to
|
|
download files to Flash. A copy-to-flash
|
|
command can be used and this system image
|
|
will automatically reload the Rxboot image
|
|
in ROM and direct it to carry out the
|
|
download request.
|
|
direct - will be done directly by this image.
|
|
"
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(1),
|
|
rxbootFLH(2),
|
|
direct(3)
|
|
}
|
|
|
|
H3cFlashPartitionStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If device is not programmable the value of it will be
|
|
'readOnly'; If the current image is running from
|
|
this partition the value of it will be 'runFromFlash'
|
|
If device is programmable the value of it will be 'readWrite'.
|
|
"
|
|
SYNTAX INTEGER
|
|
{
|
|
readOnly(1),
|
|
runFromFlash(2),
|
|
readWrite(3)
|
|
}
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
h3cFlashManMIBObjects OBJECT IDENTIFIER ::= { h3cFlash 1 }
|
|
|
|
|
|
-- The flash device information.
|
|
h3cFlashDevice OBJECT IDENTIFIER ::= { h3cFlashManMIBObjects 1 }
|
|
|
|
|
|
h3cFlhSupportNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the total number of flash which the
|
|
system supported.
|
|
|
|
The MIB should not be loaded if there is no flash
|
|
in the system and so the value here will be a
|
|
minimum of 1.
|
|
"
|
|
::= { h3cFlashDevice 1 }
|
|
|
|
|
|
h3cFlashTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cFlashEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table gives the properties of all the flashes on
|
|
the system.
|
|
"
|
|
::= { h3cFlashDevice 2 }
|
|
|
|
|
|
h3cFlashEntry OBJECT-TYPE
|
|
SYNTAX H3cFlashEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of h3cFlashTable."
|
|
INDEX { h3cFlhIndex }
|
|
::= { h3cFlashTable 1 }
|
|
|
|
|
|
H3cFlashEntry ::=
|
|
SEQUENCE {
|
|
h3cFlhIndex Integer32,
|
|
h3cFlhSize Integer32,
|
|
h3cFlhPos PhysicalIndex,
|
|
h3cFlhName DisplayString,
|
|
h3cFlhChipNum Integer32,
|
|
h3cFlhDescr DisplayString,
|
|
h3cFlhInitTime TimeStamp,
|
|
h3cFlhRemovable TruthValue,
|
|
h3cFlhPartitionBool TruthValue,
|
|
h3cFlhMinPartitionSize Integer32,
|
|
h3cFlhMaxPartitions Integer32,
|
|
h3cFlhPartitionNum Integer32,
|
|
h3cFlhKbyteSize Integer32
|
|
}
|
|
|
|
h3cFlhIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The index of h3cFlashTable. There are two parts for this index
|
|
depicted as follows:
|
|
31 15 0
|
|
+++++++++++++++++++++++++++++++++++++++++
|
|
+ entity index + random index +
|
|
+ ( bit 16..31 ) ( bit 0..15 ) +
|
|
+++++++++++++++++++++++++++++++++++++++++
|
|
|
|
From bit0 to bit15 (two bytes), it has a minimum value of 1, and
|
|
maximum value of the same as the value of h3cFlhSupportNum.
|
|
|
|
From bit16 to bit31 (two bytes), it is the physical index the same as the
|
|
entPhysicalIndex specified in ENTITY-MIB.
|
|
"
|
|
::= { h3cFlashEntry 1 }
|
|
|
|
|
|
h3cFlhSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the total size of the flash device indexed
|
|
by h3cFlhIndex. The value should be zero if the flash is
|
|
removed for a removable device.
|
|
"
|
|
::= { h3cFlashEntry 2 }
|
|
|
|
|
|
h3cFlhPos OBJECT-TYPE
|
|
SYNTAX PhysicalIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The position of the flash device in system. This object is
|
|
an index of entPhysicalTable in ENTITY-MIB.
|
|
If the value of this object is 0,
|
|
the main processor is indicated.
|
|
"
|
|
::= { h3cFlashEntry 3 }
|
|
|
|
|
|
h3cFlhName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flash name within the system."
|
|
::= { h3cFlashEntry 4 }
|
|
|
|
|
|
h3cFlhChipNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The chip numbers in the flash."
|
|
::= { h3cFlashEntry 5 }
|
|
|
|
|
|
h3cFlhDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the purpose of the flash in the system."
|
|
::= { h3cFlashEntry 6 }
|
|
|
|
|
|
h3cFlhInitTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The initialization time for the flash component or partition,
|
|
recorded using the system time. This will be the boot time for
|
|
a fixed device. For a removable component or a partition,
|
|
it will be the initialization time.
|
|
"
|
|
::= { h3cFlashEntry 8 }
|
|
|
|
|
|
h3cFlhRemovable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The value indicates whether the flash indexed can be removed
|
|
or not.
|
|
The true(1) value indicates the flash device CAN be removed.
|
|
"
|
|
::= { h3cFlashEntry 9 }
|
|
|
|
|
|
h3cFlhPartitionBool OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The value indicates whether the flash indexed can be partitioned
|
|
or not.
|
|
The true(1) value indicates the flash CAN be partitioned.
|
|
"
|
|
::= { h3cFlashEntry 11 }
|
|
|
|
|
|
h3cFlhMinPartitionSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Minimum partition size supported.
|
|
If h3cFlhDevicePartitionBool is false, the value
|
|
of this object is the same as h3cFlhSize.
|
|
"
|
|
::= { h3cFlashEntry 12 }
|
|
|
|
|
|
h3cFlhMaxPartitions OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The maximum count of partitions which the system supports
|
|
for this flash. If h3cFlhPartitionBool is false,
|
|
the object value is 1.
|
|
"
|
|
::= { h3cFlashEntry 13 }
|
|
|
|
|
|
h3cFlhPartitionNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The actual number of partitions supported by the system for
|
|
this flash. If h3cFlhPartitionBool is false, this value is 1.
|
|
"
|
|
::= { h3cFlashEntry 14 }
|
|
|
|
h3cFlhKbyteSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the total size of the flash device indexed
|
|
by h3cFlhIndex. The value should be zero if the flash is
|
|
removed for a removable device.
|
|
"
|
|
::= { h3cFlashEntry 15 }
|
|
|
|
h3cFlashChips OBJECT IDENTIFIER ::= { h3cFlashDevice 3 }
|
|
|
|
|
|
h3cFlhChipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cFlhChipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Table of properties for all flash chips.
|
|
Used mainly for diagnostics.
|
|
"
|
|
::= { h3cFlashChips 1 }
|
|
|
|
|
|
h3cFlhChipEntry OBJECT-TYPE
|
|
SYNTAX H3cFlhChipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of h3cFlhChipTable"
|
|
INDEX { h3cFlhIndex, h3cFlhChipSerialNo }
|
|
::= { h3cFlhChipTable 1 }
|
|
|
|
|
|
H3cFlhChipEntry ::=
|
|
SEQUENCE {
|
|
h3cFlhChipSerialNo Integer32,
|
|
h3cFlhChipID DisplayString,
|
|
h3cFlhChipDescr DisplayString,
|
|
h3cFlhChipWriteTimesLimit Integer32,
|
|
h3cFlhChipWriteTimes Counter32,
|
|
h3cFlhChipEraseTimesLimit Integer32,
|
|
h3cFlhChipEraseTimes Counter32
|
|
}
|
|
|
|
h3cFlhChipSerialNo OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of h3cFlhChipTable."
|
|
::= { h3cFlhChipEntry 1 }
|
|
|
|
|
|
h3cFlhChipID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The manufacturer code (the upper byte) and
|
|
device code (the lower byte) for a chip.
|
|
Unknown chip code is presented as 00:00.
|
|
"
|
|
::= { h3cFlhChipEntry 2 }
|
|
|
|
|
|
h3cFlhChipDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The description of the flash chip.
|
|
"
|
|
::= { h3cFlhChipEntry 3 }
|
|
|
|
|
|
h3cFlhChipWriteTimesLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The limit for the number of write times (retries)
|
|
for a flash chip. If the limit
|
|
is exceeded an error should be reported by the management
|
|
station.
|
|
"
|
|
::= { h3cFlhChipEntry 4 }
|
|
|
|
|
|
h3cFlhChipWriteTimes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A count of write times (retries) for the flash chip since
|
|
initialization.
|
|
A count of 25 or more for a single chip indicates a write error.
|
|
Management stations should note the value of this MIB before and
|
|
after a write operation,
|
|
and report any errors accordingly.
|
|
"
|
|
::= { h3cFlhChipEntry 5 }
|
|
|
|
|
|
h3cFlhChipEraseTimesLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The limit for the number of erase times (retries) for a flash
|
|
chip.
|
|
If the limit is exceeded an error should be reported by the
|
|
management station.
|
|
"
|
|
::= { h3cFlhChipEntry 6 }
|
|
|
|
|
|
h3cFlhChipEraseTimes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A count of erase times (retries) for the flash chip since
|
|
initialization.
|
|
A count of 2000 or more for a single chip indicates a write
|
|
error.
|
|
Management stations should note the value of this MIB before and
|
|
after an erase operation, and report any errors accordingly.
|
|
"
|
|
::= { h3cFlhChipEntry 7 }
|
|
|
|
|
|
h3cFlashPartitions OBJECT IDENTIFIER ::= { h3cFlashDevice 4 }
|
|
|
|
|
|
h3cFlhPartitionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cFlhPartitionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Properties for the flash partitions. Minimum of one entry in
|
|
this table.
|
|
"
|
|
::= { h3cFlashPartitions 1 }
|
|
|
|
|
|
h3cFlhPartitionEntry OBJECT-TYPE
|
|
SYNTAX H3cFlhPartitionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An entry of the h3cFlhPartitionTable.Indexed by flash
|
|
number and partition number.
|
|
"
|
|
INDEX { h3cFlhIndex, h3cFlhPartIndex }
|
|
::= { h3cFlhPartitionTable 1 }
|
|
|
|
|
|
H3cFlhPartitionEntry ::=
|
|
SEQUENCE {
|
|
h3cFlhPartIndex Integer32,
|
|
h3cFlhPartFirstChip Integer32,
|
|
h3cFlhPartLastChip Integer32,
|
|
h3cFlhPartSpace Integer32,
|
|
h3cFlhPartSpaceFree Gauge32,
|
|
h3cFlhPartFileNum Integer32,
|
|
h3cFlhPartChecksumMethod INTEGER,
|
|
h3cFlhPartStatus H3cFlashPartitionStatus,
|
|
h3cFlhPartUpgradeMode H3cFlashPartitionUpgradeMode,
|
|
h3cFlhPartName DisplayString,
|
|
h3cFlhPartRequireErase TruthValue,
|
|
h3cFlhPartFileNameLen Integer32
|
|
}
|
|
|
|
h3cFlhPartIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An index which specifies a sequenced partition in the system.
|
|
"
|
|
::= { h3cFlhPartitionEntry 1 }
|
|
|
|
|
|
h3cFlhPartFirstChip OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The first chip's sequence number in the
|
|
partition, by which a chip can be indexed in
|
|
chip table.
|
|
"
|
|
::= { h3cFlhPartitionEntry 2 }
|
|
|
|
|
|
h3cFlhPartLastChip OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The last chip's sequence number in the
|
|
partition, by which a chip can be indexed in
|
|
chip table.
|
|
"
|
|
::= { h3cFlhPartitionEntry 3 }
|
|
|
|
|
|
h3cFlhPartSpace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total space of the flash partition.
|
|
The following should be satisfied:
|
|
h3cFlhPartSpace = n*h3cFlhMinPartitionSize
|
|
"
|
|
::= { h3cFlhPartitionEntry 4 }
|
|
|
|
|
|
h3cFlhPartSpaceFree OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flash partition's free space."
|
|
::= { h3cFlhPartitionEntry 5 }
|
|
|
|
|
|
h3cFlhPartFileNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all the files in the flash partition."
|
|
::= { h3cFlhPartitionEntry 6 }
|
|
|
|
|
|
h3cFlhPartChecksumMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
simpleChecksum(1),
|
|
undefined(2),
|
|
simpleCRC(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Checksum method which the file system uses."
|
|
::= { h3cFlhPartitionEntry 7 }
|
|
|
|
|
|
h3cFlhPartStatus OBJECT-TYPE
|
|
SYNTAX H3cFlashPartitionStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flash partition status."
|
|
::= { h3cFlhPartitionEntry 8 }
|
|
|
|
|
|
h3cFlhPartUpgradeMode OBJECT-TYPE
|
|
SYNTAX H3cFlashPartitionUpgradeMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upgrade mode of the Flash partition"
|
|
::= { h3cFlhPartitionEntry 9 }
|
|
|
|
|
|
h3cFlhPartName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the flash partition given by the system."
|
|
::= { h3cFlhPartitionEntry 10 }
|
|
|
|
|
|
h3cFlhPartRequireErase OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Shows whether a write operation is conditional on partition
|
|
erase.
|
|
"
|
|
::= { h3cFlhPartitionEntry 11 }
|
|
|
|
|
|
h3cFlhPartFileNameLen OBJECT-TYPE
|
|
SYNTAX Integer32 (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum length of file name supported in the system."
|
|
::= { h3cFlhPartitionEntry 12 }
|
|
|
|
|
|
h3cFlhFiles OBJECT IDENTIFIER ::= { h3cFlashPartitions 2 }
|
|
|
|
|
|
h3cFlhFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cFlhFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of file information."
|
|
::= { h3cFlhFiles 1 }
|
|
|
|
|
|
h3cFlhFileEntry OBJECT-TYPE
|
|
SYNTAX H3cFlhFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An entry representing a file. Indexed using flash number,
|
|
partition number, and file number.
|
|
"
|
|
INDEX { h3cFlhIndex, h3cFlhPartIndex, h3cFlhFileIndex }
|
|
::= { h3cFlhFileTable 1 }
|
|
|
|
|
|
H3cFlhFileEntry ::=
|
|
SEQUENCE {
|
|
h3cFlhFileIndex Integer32,
|
|
h3cFlhFileName DisplayString,
|
|
h3cFlhFileSize Integer32,
|
|
h3cFlhFileStatus INTEGER,
|
|
h3cFlhFileChecksum OCTET STRING
|
|
}
|
|
|
|
h3cFlhFileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the table, whose range is from 1 to 2147483647"
|
|
::= { h3cFlhFileEntry 1 }
|
|
|
|
|
|
h3cFlhFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A valid file name supported by the file system."
|
|
::= { h3cFlhFileEntry 2 }
|
|
|
|
|
|
h3cFlhFileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The file size in bytes excluding the file
|
|
header of file system. The value should be greater than zero.
|
|
"
|
|
::= { h3cFlhFileEntry 3 }
|
|
|
|
|
|
h3cFlhFileStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deleted(1),
|
|
invalidChecksum(2),
|
|
valid(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The status should be as follows:
|
|
deleted(1): The file is in recycle bin.
|
|
invalidChecksum(2): The checksum of file is invalid;
|
|
valid(3): A valid file.
|
|
"
|
|
::= { h3cFlhFileEntry 4 }
|
|
|
|
|
|
h3cFlhFileChecksum OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The file checksum in the header of file."
|
|
::= { h3cFlhFileEntry 5 }
|
|
|
|
|
|
-- The operation on the flash.
|
|
h3cFlashOperate OBJECT IDENTIFIER ::= { h3cFlashManMIBObjects 2 }
|
|
|
|
|
|
h3cFlhOpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cFlhOpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table used to operate flash."
|
|
::= { h3cFlashOperate 1 }
|
|
|
|
|
|
h3cFlhOpEntry OBJECT-TYPE
|
|
SYNTAX H3cFlhOpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Note an operation can not be stopped until it is finished.
|
|
|
|
If notification is configured, NMS will receive a notification
|
|
at the end of the operation.
|
|
|
|
Entries in the table will be removed automatically in 5 minutes.
|
|
It can also be deleted by NMS directly.
|
|
"
|
|
INDEX { h3cFlhOperIndex }
|
|
::= { h3cFlhOpTable 1 }
|
|
|
|
|
|
H3cFlhOpEntry ::=
|
|
SEQUENCE {
|
|
h3cFlhOperIndex Integer32,
|
|
h3cFlhOperType INTEGER,
|
|
h3cFlhOperProtocol INTEGER,
|
|
h3cFlhOperServerAddress IpAddress,
|
|
h3cFlhOperServerUser DisplayString,
|
|
h3cFlhOperPassword DisplayString,
|
|
h3cFlhOperSourceFile DisplayString,
|
|
h3cFlhOperDestinationFile DisplayString,
|
|
h3cFlhOperStatus H3cFlashOperationStatus,
|
|
h3cFlhOperEndNotification TruthValue,
|
|
h3cFlhOperProgress TimeTicks,
|
|
h3cFlhOperRowStatus RowStatus,
|
|
h3cFlhOperServerPort Integer32,
|
|
h3cFlhOperFailReason DisplayString,
|
|
h3cFlhOperSrvAddrType InetAddressType,
|
|
h3cFlhOperSrvAddrRev InetAddress,
|
|
h3cFlhOperSrvVPNName DisplayString
|
|
}
|
|
|
|
h3cFlhOperIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the index of an entry. It is a
|
|
random value when creating an entry.
|
|
"
|
|
::= { h3cFlhOpEntry 1 }
|
|
|
|
|
|
h3cFlhOperType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
net2FlashWithErase(1),
|
|
net2FlashWithoutErase(2),
|
|
flash2Net(3),
|
|
delete(4),
|
|
rename(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the operation to be executed.
|
|
|
|
net2FlashWithErase Copy a file to flash; erase
|
|
flash beforehand.
|
|
|
|
net2FlashWithoutErase Copy a file to flash; do not erase flash
|
|
beforehand.
|
|
|
|
flash2Net Copy a file from flash.
|
|
|
|
delete Delete a file from flash, the file name is
|
|
specified by h3cFlhOperSourceFile;
|
|
|
|
rename Change a file's name.
|
|
"
|
|
::= { h3cFlhOpEntry 2 }
|
|
|
|
|
|
h3cFlhOperProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ftp(1),
|
|
tftp(2),
|
|
clusterftp(3),
|
|
clustertftp(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the protocol used to transfer file.
|
|
The default protocol is ftp.
|
|
|
|
when 'clusterftp' or 'clustertftp' is selected,
|
|
the h3cFlhOperServerAddress needn't be set,
|
|
the server address can be acquired automatically, the value of
|
|
h3cFlhOperServerAddress is uncertain during operation.
|
|
Both member switch and commander switch can use them if they
|
|
support HGMP v2.
|
|
"
|
|
DEFVAL { ftp }
|
|
::= { h3cFlhOpEntry 3 }
|
|
|
|
|
|
h3cFlhOperServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The address of remote host acting as server for operation.
|
|
|
|
The default value is 255.255.255.255
|
|
|
|
This object is replaced by h3cFlhOperSrvAddrRev for it only support IPv4.
|
|
"
|
|
DEFVAL { 'FFFFFFFF'h }
|
|
::= { h3cFlhOpEntry 4 }
|
|
|
|
|
|
h3cFlhOperServerUser OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When using ftp to transfer files, the user name must be
|
|
specified through this node.
|
|
"
|
|
::= { h3cFlhOpEntry 5 }
|
|
|
|
|
|
h3cFlhOperPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Remote user password for copying via ftp protocol. Optionally,
|
|
This object may be ignored for protocols other than ftp. "
|
|
::= { h3cFlhOpEntry 6 }
|
|
|
|
|
|
h3cFlhOperSourceFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the source file name to be transferred.
|
|
It may be located on flash or remote server.
|
|
It may include the file path if it is applicable.
|
|
It must be specified.
|
|
"
|
|
::= { h3cFlhOpEntry 7 }
|
|
|
|
|
|
h3cFlhOperDestinationFile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Specifies the destination file name.
|
|
It may be located on flash or remote server.
|
|
It may include the file path if it is applicable.
|
|
If it is not specified, the destination file name
|
|
is the same as source file name for application.
|
|
"
|
|
::= { h3cFlhOpEntry 8 }
|
|
|
|
|
|
h3cFlhOperStatus OBJECT-TYPE
|
|
SYNTAX H3cFlashOperationStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of operation."
|
|
::= { h3cFlhOpEntry 9 }
|
|
|
|
|
|
h3cFlhOperEndNotification OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
If the value of it is specified 'true', a notification
|
|
will be generated at the end of the operation.
|
|
Else no notification will be generated.
|
|
"
|
|
DEFVAL { false }
|
|
::= { h3cFlhOpEntry 10 }
|
|
|
|
|
|
h3cFlhOperProgress OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The progress described as the time taken for the operation.
|
|
"
|
|
::= { h3cFlhOpEntry 11 }
|
|
|
|
|
|
h3cFlhOperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of this table entry."
|
|
::= { h3cFlhOpEntry 12 }
|
|
|
|
h3cFlhOperServerPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port of remote host acting as server for operation.
|
|
If the value of this object is not specified, the server
|
|
port is the known protocol port."
|
|
::= { h3cFlhOpEntry 13 }
|
|
|
|
h3cFlhOperFailReason OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The failure reasons of operation."
|
|
::= { h3cFlhOpEntry 14 }
|
|
|
|
h3cFlhOperSrvAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address for h3cFlhOperSrvAddrRev."
|
|
::= { h3cFlhOpEntry 15 }
|
|
|
|
h3cFlhOperSrvAddrRev OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of remote host acting as server for operation."
|
|
::= { h3cFlhOpEntry 16 }
|
|
|
|
h3cFlhOperSrvVPNName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPN instance of this operation uses."
|
|
::= { h3cFlhOpEntry 17 }
|
|
|
|
h3cFlashNotification OBJECT IDENTIFIER ::= { h3cFlashManMIBObjects 3 }
|
|
|
|
|
|
h3cFlhOperNotification NOTIFICATION-TYPE
|
|
OBJECTS { h3cFlhOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A h3cFlhOperNotification is sent at the completion of a flash
|
|
copy operation if h3cFlhOperEndNotification is true.
|
|
"
|
|
::= { h3cFlashNotification 1 }
|
|
|
|
|
|
h3cFlashMIBConformance OBJECT IDENTIFIER ::= { h3cFlash 2 }
|
|
|
|
|
|
h3cFlhMIBCompliances OBJECT IDENTIFIER ::= { h3cFlashMIBConformance 1 }
|
|
|
|
|
|
h3cFlhMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The statement of compliance for those implementing this MIB.
|
|
"
|
|
MODULE A3COM-HUAWEI-FLASH-MAN-MIB
|
|
MANDATORY-GROUPS { h3cFlhGroup, h3cFlhPartitionGroup,
|
|
h3cFlhFileGroup, h3cFlhOperationGroup, h3cFlhNotificationGroup
|
|
}
|
|
GROUP h3cFlhChipGroup
|
|
DESCRIPTION
|
|
" "
|
|
::= { h3cFlhMIBCompliances 1 }
|
|
|
|
|
|
h3cFlashMIBGroups OBJECT IDENTIFIER ::= { h3cFlashMIBConformance 2 }
|
|
|
|
|
|
h3cFlhGroup OBJECT-GROUP
|
|
OBJECTS { h3cFlhSupportNum, h3cFlhSize, h3cFlhPos, h3cFlhName,
|
|
h3cFlhChipNum, h3cFlhDescr, h3cFlhInitTime, h3cFlhRemovable,
|
|
h3cFlhPartitionBool, h3cFlhMinPartitionSize,
|
|
h3cFlhMaxPartitions, h3cFlhPartitionNum, h3cFlhIndex, h3cFlhKbyteSize }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects on Flash level information."
|
|
::= { h3cFlashMIBGroups 1 }
|
|
|
|
|
|
h3cFlhChipGroup OBJECT-GROUP
|
|
OBJECTS { h3cFlhChipID, h3cFlhChipDescr, h3cFlhChipWriteTimesLimit,
|
|
h3cFlhChipWriteTimes, h3cFlhChipEraseTimesLimit,
|
|
h3cFlhChipEraseTimes }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects on chip level information."
|
|
::= { h3cFlashMIBGroups 3 }
|
|
|
|
|
|
h3cFlhPartitionGroup OBJECT-GROUP
|
|
OBJECTS { h3cFlhPartFirstChip, h3cFlhPartLastChip, h3cFlhPartSpace,
|
|
h3cFlhPartSpaceFree, h3cFlhPartFileNum,
|
|
h3cFlhPartChecksumMethod, h3cFlhPartStatus,
|
|
h3cFlhPartUpgradeMode, h3cFlhPartName, h3cFlhPartRequireErase,
|
|
h3cFlhPartFileNameLen }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing on partition
|
|
level information."
|
|
::= { h3cFlashMIBGroups 4 }
|
|
|
|
|
|
h3cFlhFileGroup OBJECT-GROUP
|
|
OBJECTS { h3cFlhFileName, h3cFlhFileSize, h3cFlhFileStatus,
|
|
h3cFlhFileChecksum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects on file level information."
|
|
::= { h3cFlashMIBGroups 5 }
|
|
|
|
|
|
h3cFlhOperationGroup OBJECT-GROUP
|
|
OBJECTS { h3cFlhOperType, h3cFlhOperProtocol,
|
|
h3cFlhOperServerAddress, h3cFlhOperServerUser,
|
|
h3cFlhOperPassword, h3cFlhOperSourceFile,
|
|
h3cFlhOperDestinationFile, h3cFlhOperStatus,
|
|
h3cFlhOperEndNotification, h3cFlhOperProgress,
|
|
h3cFlhOperRowStatus, h3cFlhOperServerPort,
|
|
h3cFlhOperFailReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of flash operations."
|
|
::= { h3cFlashMIBGroups 6 }
|
|
|
|
|
|
h3cFlhNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { h3cFlhOperNotification }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications in the module"
|
|
::= { h3cFlashMIBGroups 7 }
|
|
|
|
END
|