WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/a3com/A3COM-HUAWEI-CONFIG-MAN-MIB

1097 lines
38 KiB
Plaintext
Raw Permalink Blame History

-- =================================================================
-- Copyright (c) 2004-2012 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:configuration management mib
-- Reference:
-- Version: V2.4
-- History:
-- Initial version 2002-12-20
-- V1.1 24th Feb 2004
-- module imported from A3COM-HUAWEI-OID-MIB which is the root MIB MODULE.
-- V1.2 14th May 2004
-- convert MIB object name from hwXXX to h3c, etc.
-- V1.3 18th Aug 2004
-- modified DESCRIPTION of 'h3cCfgLogFile' by jinyi.
-- V1.4 16th Sept 2004
-- modified DESCRIPTION of 'h3cCfgLogTerminalType' and 'h3cCfgLogTerminalNum' by wangyingxia
-- V1.5 9th Oct 2004
-- modified DESCRIPTION of 'h3cCfgRunModifiedLast' and 'h3cCfgManEventlog' by wangrui
-- V1.6 30th Nov 2004
-- modified DESCRIPTION of 'h3cCfgOperateCompletion' by wangrui
-- V1.7 11th Jan 2005
-- Updated by gaolong and weixinzhe for updating description
-- V1.8 26th Apr 2005
-- Updated by wangrui for added h3cCfgExecuteOperate and added ConfigOperationStateType
-- modified DESCRIPTION of 'h3cCfgLogSrcData', 'h3cCfgLogDesData' and 'h3cCfgLogTerminalType' by fuzhenyu
-- V1.9 6th Jun 2005
-- Add enum value in SYNTAX of h3cCfgOperateProtocol by jinyongfeng.
-- V2.0 27th sept 2005
-- modified DESCRIPTION of 'h3cCfgLogSrcCmd', 'h3cCfgRunModifiedLast' and 'h3cCfgLogDesData' by lisongfeng and wangrui
-- V2.1 2009-05-05 Add h3cCfgOperateServerPort, h3cCfgInvalidConfigFile by jinyi
-- V2.2 2009-12-20 Add h3cCfgOperFailReason, h3cCfgReset by shuaixiaojuan
-- V2.3 2010-10-30 Deprecated h3cCfgOperateServerAddress, h3cCfgLogCmdSrcAddress
-- and h3cCfgLogServerAddress,
-- added enum in ConfigOperationStateType,
-- added h3cCfgOperateSrvAddrType, h3cCfgOperateSrvAddrRev and
-- h3cCfgOperateSrvVPNName, h3cCfgLogCmdSrcAddrType,
-- h3cCfgLogCmdSrcAddrRev, h3cCfgLogCmdSrcAddrVPNName,
-- h3cCfgLogServerAddrType,h3cCfgLogServerAddrRev, h3cCfgLogServerAddrVPNName by songhao.
-- V2.4 2011-11-26
-- Add h3cCfgFirstTrapTime by duyanbing 04404.
-- =================================================================
A3COM-HUAWEI-CONFIG-MAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
huaweiUtility
FROM A3COM-HUAWEI-OID-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeTicks, IpAddress, Integer32, Counter32,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
h3cConfig MODULE-IDENTITY
LAST-UPDATED "201111260000Z"
ORGANIZATION
"Hangzhou H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team Hangzhou H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085"
DESCRIPTION
"This MIB contains objects to manage the system configuration. It contains the
model used to represent configuration data that exists elsewhere in the system and in peripheral devices.
There are no constraints on this MIB."
REVISION "201111260000Z"
DESCRIPTION
"The initial revision of this MIB module."
::= { huaweiUtility 10 }
--
-- Textual conventions
--
ConfigOperationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify operation types on configuration.
Currently, following types of operation are provided:
running2Startup(1):
Update the saved configuration (startup) file used currently
with the current configuration running in the system. This
operation is equivalent to the [save] command from command line.
If current startup configuration file does not exist, then the default
startup configuration file is created to save the data and this
becomes the current startup configuration file.
startup2Running(2):
Update the current configuration running in the system
with the saved configuration (startup) file used currently. The
commands in the file are executed as if they had been entered via
the command line. If the current startup configuration file does not
exist, the operation will fail with the error opFileOpenError(13).
running2Net(3):
Send the current configuration running in the system to the network
using the specified file transfer protocol.
net2Running(4):
Update the current configuration running in the system with a remote
file from the network using the specified file transfer protocol.
The commands in the file are executed as if they had been entered via
the command line.
net2Startup(5):
Download a remote file to the local system using the specified file
transfer protocol and replace the saved configuration (startup) file
used currently. If current startup configurationfile does not exist,
the default startup configuration file is created to save the data and
this becomes the current startup configuration file.
startup2Net(6):
Send the saved configuration (startup) file used currently to the network using
the specified file transfer protocol. If the current startup configuration
file does not exist, the operation will fail with the error opFileOpenError(13).
"
SYNTAX INTEGER
{
running2Startup(1),
startup2Running(2),
running2Net(3),
net2Running(4),
net2Startup(5),
startup2Net(6)
}
ConfigOperationStateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the specified operation.
opInProgress : Specified operation is active.
opOperationSuccess : Specified operation is supported and
completed successfully.
opInvalidOperation : Command invalid or command/protocol/device
combination unsupported.
opInvalidProtocol : Invalid protocol specified.
opInvalidSourceName : Invalid source file name specified.
opInvalidDestName : Invalid target name specified.
opInvalidServerAddress : Invalid server address specified.
opDeviceBusy : Specified device is in use and locked by another process.
opDeviceOpenError : Invalid device name.
opDeviceError : Device read, write or erase error.
opDeviceNotProgrammable : Device is read-only but a write or erase
operation was specified.
opDeviceFull : Device is filled to capacity.
opFileOpenError : Invalid file name; file not found in partition.
opFileTransferError : File transfer was unsuccessful; network failure.
opFileChecksumError : File checksum in Flash failed.
opNoMemory : System running low on memory.
opAuthFail: Invalid user name or password.
opTimeOut : File transfer was timeout.
opUnknownFailure : Failure unknown.
opInvalidConfigFile: Invalid configration file.
opSlaveFull : Operation is fail for the slave don't have enough space.
opCopyToSlaveFailure : Operation is fail when copy file to the slave.
"
SYNTAX INTEGER
{
opInProgress(1),
opSuccess(2),
opInvalidOperation(3),
opInvalidProtocol(4),
opInvalidSourceName(5),
opInvalidDestName(6),
opInvalidServerAddress(7),
opDeviceBusy(8),
opDeviceOpenError(9),
opDeviceError(10),
opDeviceNotProgrammable(11),
opDeviceFull(12),
opFileOpenError(13),
opFileTransferError(14),
opFileChecksumError(15),
opNoMemory(16),
opAuthFail(17),
opTimeOut(18),
opUnknownFailure(19),
opInvalidConfigFile(20),
opSlaveFull(21),
opCopyToSlaveFailure(22)
}
--
-- Node definitions
--
h3cConfigManObjects OBJECT IDENTIFIER ::= { h3cConfig 1 }
h3cCfgLog OBJECT IDENTIFIER ::= { h3cConfigManObjects 1 }
h3cCfgRunModifiedLast OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the value of sysUpTime when the current configuration
running in the system was last modified.
The value will be changed immediately after system detects the current
configuration has been changed."
::= { h3cCfgLog 1 }
h3cCfgRunSavedLast OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the value of sysUpTime when the current configuration
running in the system was last saved.
If the value of the object is smaller than
h3cCfgRunModifiedLast, the current configuration has been
modified but not saved."
::= { h3cCfgLog 2 }
h3cCfgStartModifiedLast OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the value of sysUpTime when the saved configuration
used currently was last modified. It may have been modified by a save of the
current configuration running in the system or other methods such as copy."
::= { h3cCfgLog 3 }
h3cCfgLogLimitedEntries OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object shows the maximum number of rows in
h3cCfgLogTable. The value supported by the system is 10.
"
::= { h3cCfgLog 4 }
h3cCfgLogDeletedEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of rows deleted from h3cCfgLogTable."
::= { h3cCfgLog 5 }
h3cCfgLogWantBackup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Decide whether to backup the value of objects about h3cCfgLog."
DEFVAL { true }
::= { h3cCfgLog 6 }
-- If the value is true, the data of configuration log on the master will send to
-- slave. Otherwise the data of log will be lost when master switches to
-- slave.
h3cCfgLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cCfgLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for logging configuration operation in device."
::= { h3cCfgLog 7 }
h3cCfgLogEntry OBJECT-TYPE
SYNTAX H3cCfgLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information of the entry."
INDEX { h3cCfgLogIndex }
::= { h3cCfgLogTable 1 }
H3cCfgLogEntry ::=
SEQUENCE
{
h3cCfgLogIndex Integer32,
h3cCfgLogTime TimeTicks,
h3cCfgLogSrcCmd INTEGER,
h3cCfgLogSrcData INTEGER,
h3cCfgLogDesData INTEGER,
h3cCfgLogTerminalType INTEGER,
h3cCfgLogTerminalUser DisplayString,
h3cCfgLogTerminalNum Integer32,
h3cCfgLogTerminalLocation DisplayString,
h3cCfgLogCmdSrcAddress IpAddress,
h3cCfgLogVirHost DisplayString,
h3cCfgLogUserName DisplayString,
h3cCfgLogServerAddress IpAddress,
h3cCfgLogFile DisplayString,
h3cCfgLogCmdSrcAddrType InetAddressType,
h3cCfgLogCmdSrcAddrRev InetAddress,
h3cCfgLogCmdSrcAddrVPNName DisplayString,
h3cCfgLogServerAddrType InetAddressType,
h3cCfgLogServerAddrRev InetAddress,
h3cCfgLogServerAddrVPNName DisplayString
}
h3cCfgLogIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the table beginning from 1."
::= { h3cCfgLogEntry 1 }
h3cCfgLogTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the sysUpTime when the config log was generated."
::= { h3cCfgLogEntry 2 }
h3cCfgLogSrcCmd OBJECT-TYPE
SYNTAX INTEGER
{
cmdLine(1),
snmp(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the source command which brought the log.
Currently we provide the types of source:
1.cmdLine(1):configure log instigated by command line.
2.snmp(2):configure log instigated by snmp.
3.other(3):configure log instigated by other source unknown."
::= { h3cCfgLogEntry 3 }
h3cCfgLogSrcData OBJECT-TYPE
SYNTAX INTEGER
{
erase(1),
runningData(2),
commandSource(3),
startupData(4),
local(5),
netFtp(6),
hotPlugging(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of the configuration data event.
erase erasing destination
runningData operational data alive
commandSource the command source itself
startupData what the system will use next reboot
local local NVRAM or flash
netFtp FTP network transfer
hotPlugging board is inserted or pulled out on line
"
::= { h3cCfgLogEntry 4 }
h3cCfgLogDesData OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
runningData(2),
commandSource(3),
startupData(4),
local(5),
netFtp(6),
hotPlugging(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination for the configuration data event.
unknown unknown
runningData operational data alive
commandSource the command source itself
startupData what the system will use next reboot
local local NVRAM or flash
netFtp FTP network transfer
hotPlugging board is inserted or pulled out on line"
::= { h3cCfgLogEntry 5 }
h3cCfgLogTerminalType OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(1),
unknown(2),
console(3),
terminal(4),
virtual(5),
auxiliary(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the terminal type.
If h3cCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'.
The value list:
notApplicable(1): no meaning at this time.
unknown(2): unknown terminal type.
console(3): console interface.
terminal(4): generic terminal.
virtual(5): virtual terminal such as telnet.
auxiliary(6): auxiliary interface."
::= { h3cCfgLogEntry 6 }
h3cCfgLogTerminalUser OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of logging user which is available when h3cCfgLogSrcCmd
is 'cmdLine'.
Other, a zero length string."
::= { h3cCfgLogEntry 7 }
h3cCfgLogTerminalNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the terminal number.
If h3cCfgLogSrcCmd is not 'cmdLine', use '-1'"
::= { h3cCfgLogEntry 8 }
h3cCfgLogTerminalLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The location of logging user which is available when h3cCfgLogSrcCmd
is 'cmdLine'.
Other, a zero length string."
::= { h3cCfgLogEntry 9 }
h3cCfgLogCmdSrcAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'.
The ip address of the remote system connected when the value of h3cCfgLogTerminalType
is 'virtual'.
Other, the value of 0.0.0.0.
This object is replaced by for it only support IPv4."
::= { h3cCfgLogEntry 10 }
h3cCfgLogVirHost OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The host name of remote system connected if
h3cCfgLogTerminalType has the value of 'virtual'.
Other, a zero length string."
::= { h3cCfgLogEntry 11 }
h3cCfgLogUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name used when h3cCfgLogSrcData or h3cCfgLogDesData has
the value of 'netFtp'.
Other, a zero length string."
::= { h3cCfgLogEntry 12 }
h3cCfgLogServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData
has the value of 'netFtp'.
Other, a value of 0.0.0.0.
This object is replaced by for it only support IPv4."
::= { h3cCfgLogEntry 13 }
h3cCfgLogFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current configuration file name when h3cCfgLogSrcData has
the value of 'netFtp',and h3cCfgLogDesData has the value of 'startupData'.
Other, a zero length string."
::= { h3cCfgLogEntry 14 }
h3cCfgLogCmdSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of IP address for the h3cCfgLogCmdSrcAddrRev."
::= { h3cCfgLogEntry 15 }
h3cCfgLogCmdSrcAddrRev OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'.
The ip address of the remote system connected when the value of h3cCfgLogTerminalType
is 'virtual'.
Other, the value of 0.0.0.0."
::= { h3cCfgLogEntry 16 }
h3cCfgLogCmdSrcAddrVPNName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPN instance of this operation uses."
::= { h3cCfgLogEntry 17 }
h3cCfgLogServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of IP address for the h3cCfgLogServerAddrRev."
::= { h3cCfgLogEntry 18 }
h3cCfgLogServerAddrRev OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData
has the value of 'netFtp'.
Other, a value of 0.0.0.0."
::= { h3cCfgLogEntry 19 }
h3cCfgLogServerAddrVPNName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPN instance of this operation uses."
::= { h3cCfgLogEntry 20 }
h3cCfgOperate OBJECT IDENTIFIER ::= { h3cConfigManObjects 2 }
h3cCfgOperateGlobalEntryLimit OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of copy entries that may be held
in h3cCfgOperateTable. A particular setting does not guarantee
that much data can be held."
DEFVAL { 5 }
::= { h3cCfgOperate 1 }
h3cCfgOperateEntryAgeOutTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of minutes an unactive h3cCfgOperateEntry SHOULD be kept in the
h3cCfgOperateTable before it is active. The object is a fator taken account
of when it needs delete some rows make room in h3cCfgOperateTable. "
DEFVAL { 5 }
::= { h3cCfgOperate 2 }
h3cCfgOperateResultGlobalEntryLimit OBJECT-TYPE
SYNTAX Integer32(1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of copy entries that may be held
in h3cCfgOperateResultTable. A particular setting does not guarantee
that much data can be held."
DEFVAL { 5 }
::= { h3cCfgOperate 3 }
h3cCfgOperateTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cCfgOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of config-operation requests."
::= { h3cCfgOperate 4 }
h3cCfgOperateEntry OBJECT-TYPE
SYNTAX H3cCfgOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An operate request entry."
INDEX { h3cCfgOperateIndex }
::= { h3cCfgOperateTable 1 }
H3cCfgOperateEntry ::=
SEQUENCE
{
h3cCfgOperateIndex Integer32,
h3cCfgOperateType ConfigOperationType,
h3cCfgOperateProtocol INTEGER,
h3cCfgOperateFileName DisplayString,
h3cCfgOperateServerAddress IpAddress,
h3cCfgOperateUserName DisplayString,
h3cCfgOperateUserPassword DisplayString,
h3cCfgOperateEndNotificationSwitch TruthValue,
h3cCfgOperateRowStatus RowStatus,
h3cCfgOperateServerPort Integer32,
h3cCfgOperateSrvAddrType InetAddressType,
h3cCfgOperateSrvAddrRev InetAddress,
h3cCfgOperateSrvVPNName DisplayString
}
h3cCfgOperateIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { h3cCfgOperateEntry 1 }
h3cCfgOperateType OBJECT-TYPE
SYNTAX ConfigOperationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the type of operation on configuration."
::= { h3cCfgOperateEntry 2 }
h3cCfgOperateProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
tftp(2),
clusterftp(3),
clustertftp(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of h3cCfgOperateType is running2Net,net2Running,net2Startup
or startup2net, this node specify the protocol to be
used for file transfer .
The default protocol is ftp if no protocol is specified.
And for other value of h3cCfgOperateType , this object may
be ignored by the implementation.
when clusterftp or clustertftp is selected,
the h3cCfgOperateServerAddress needn't be set,
the server address can be acquired automatically, the value of h3cCfgOperateServerAddress
is uncertain during operation.
both member switch and commander switch can use them if they support HGMP v2.
"
::= { h3cCfgOperateEntry 3 }
h3cCfgOperateFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the object of h3cCfgOperateType has the value of net2Startup, net2running or
running2Net,the value must be specified. The file name may include the path if
applicable.
If the value of h3cCfgOperateType is net2Startup or net2running, this node specify the
source file name of transfers.If the value of h3cCfgOperateType is running2Net ,
this node specify the destination file name of transfers.
When h3cCfgOperateType has the value of startup2net,the object may not be
created instead of using the file name of startup configuration file."
::= { h3cCfgOperateEntry 4 }
h3cCfgOperateServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the ip address of the ftp/tftp server from/to
which to download/upload must be specified.
Values of 0.0.0.0 or FF.FF.FF.FF are not permitted.
This object is replaced by h3cFlhOperSrvAddr for it only support IPv4."
::= { h3cCfgOperateEntry 5 }
h3cCfgOperateUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the user
name for the ftp server from/to which to download/upload
should be specified. The object must be created if h3cCfgOperateProtocol
has the value of ftp. "
::= { h3cCfgOperateEntry 6 }
h3cCfgOperateUserPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the user
password for the ftp server from/to which to download/upload
should be specified. The object must be created if h3cCfgOperateProtocol
has the value of ftp. "
::= { h3cCfgOperateEntry 7 }
h3cCfgOperateEndNotificationSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether or not a notification should be
issued on the completion of the operation."
DEFVAL { false }
::= { h3cCfgOperateEntry 8 }
h3cCfgOperateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry.
When the status is active all the
object's value in the entry is not
allowed to modified."
::= { h3cCfgOperateEntry 9 }
h3cCfgOperateServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net, net2Running, net2Startup or startup2Net,
this node is used for specifying the remote port number. If the value is 0 or not
specified, the known port number will be used."
::= { h3cCfgOperateEntry 10 }
h3cCfgOperateSrvAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP address for h3cCfgOperateSrvAddrRev."
::= { h3cCfgOperateEntry 11 }
h3cCfgOperateSrvAddrRev OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the ip address of the ftp/tftp server from/to
which to download/upload must be specified."
::= { h3cCfgOperateEntry 12 }
h3cCfgOperateSrvVPNName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VPN instance of this operation uses."
::= { h3cCfgOperateEntry 13 }
h3cCfgOperateResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cCfgOperateResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of config-operation requests result."
::= { h3cCfgOperate 5 }
h3cCfgOperateResultEntry OBJECT-TYPE
SYNTAX H3cCfgOperateResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The result entries of configuration operation requests."
INDEX { h3cCfgOperateResultIndex }
::= { h3cCfgOperateResultTable 1 }
H3cCfgOperateResultEntry ::=
SEQUENCE
{
h3cCfgOperateResultIndex Integer32,
h3cCfgOperateResultOptIndex Integer32,
h3cCfgOperateResultOpType ConfigOperationType,
h3cCfgOperateState ConfigOperationStateType,
h3cCfgOperateTime TimeTicks,
h3cCfgOperateEndTime TimeTicks,
h3cCfgOperFailReason DisplayString
}
h3cCfgOperateResultIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Table, which is an incremental integer.
The maximum value of the node is 2147483647. The agent should wrap the
value to 1 and flush all the existing entries when the maximum value
is reached."
::= { h3cCfgOperateResultEntry 1 }
h3cCfgOperateResultOptIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation index in the h3cCfgOperateTable."
::= { h3cCfgOperateResultEntry 2 }
h3cCfgOperateResultOpType OBJECT-TYPE
SYNTAX ConfigOperationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation type in the h3cCfgOperateTable."
::= { h3cCfgOperateResultEntry 3 }
h3cCfgOperateState OBJECT-TYPE
SYNTAX ConfigOperationStateType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation state type in the h3cCfgOperateTable."
::= { h3cCfgOperateResultEntry 4 }
h3cCfgOperateTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Record the time taken for the operation. This object will
be like a stopwatch, starting when the operation
starts, and stopping when the operation completes."
::= { h3cCfgOperateResultEntry 5 }
h3cCfgOperateEndTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the configuration operation is finished."
::= { h3cCfgOperateResultEntry 6 }
h3cCfgOperFailReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reasons of configuration operation."
::= { h3cCfgOperateResultEntry 7 }
h3cCfgExecuteOperate OBJECT IDENTIFIER ::= { h3cCfgOperate 6 }
h3cCfgExecuteOperateResultEntryLimit OBJECT-TYPE
SYNTAX Integer32(5..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of ConfigOperationType entries that may be held
in h3cCfgExecuteResultTable. A particular setting does not guarantee
that much data can be held."
DEFVAL { 5 }
::= { h3cCfgExecuteOperate 1 }
h3cCfgExecuteResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cCfgExecuteResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configuration execute result."
::= { h3cCfgExecuteOperate 2 }
h3cCfgExecuteResultEntry OBJECT-TYPE
SYNTAX H3cCfgExecuteResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The result entries of configuration execute operation."
INDEX { h3cCfgExecuteResultIndex }
::= { h3cCfgExecuteResultTable 1 }
H3cCfgExecuteResultEntry ::=
SEQUENCE
{
h3cCfgExecuteResultIndex Integer32,
h3cCfgExecuteResultOptIndex Integer32,
h3cCfgExecuteResultOpType ConfigOperationType,
h3cCfgExecuteState ConfigOperationStateType,
h3cCfgExecuteTime TimeTicks,
h3cCfgExecuteEndTime TimeTicks
}
h3cCfgExecuteResultIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Table, which is an incremental integer.
The maximum value of the node is 2147483647. The agent should wrap the
value to 1 and flush all the existing entries when the maximum value
is reached."
::= { h3cCfgExecuteResultEntry 1 }
h3cCfgExecuteResultOptIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration execute operation index in the h3cCfgExecuteResultTable."
::= { h3cCfgExecuteResultEntry 2 }
h3cCfgExecuteResultOpType OBJECT-TYPE
SYNTAX ConfigOperationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation type in the h3cCfgExecuteResultTable."
::= { h3cCfgExecuteResultEntry 3 }
h3cCfgExecuteState OBJECT-TYPE
SYNTAX ConfigOperationStateType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Record the status of the specified operation."
::= { h3cCfgExecuteResultEntry 4 }
h3cCfgExecuteTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Record the time of the execution starts."
::= { h3cCfgExecuteResultEntry 5 }
h3cCfgExecuteEndTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Record the time of the execution is finished."
::= { h3cCfgExecuteResultEntry 6 }
h3cCfgReset OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reboot device as default configuration."
::= { h3cCfgOperate 7 }
h3cCfgFirstTrapTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the first trap time."
::= { h3cCfgLog 8 }
h3cConfigManNotifications OBJECT IDENTIFIER ::= { h3cConfig 2 }
h3cCfgManEventlog NOTIFICATION-TYPE
OBJECTS { h3cCfgLogSrcCmd, h3cCfgLogSrcData, h3cCfgLogDesData }
STATUS current
DESCRIPTION
"The object calculates the checksum on the current config per 10 minutes and
even if it is different from the saved config but if a trap has been sent
with the same checksum then don't send again until the checksum is different."
::= { h3cConfigManNotifications 1 }
h3cCfgOperateCompletion NOTIFICATION-TYPE
OBJECTS { h3cCfgOperateType, h3cCfgOperateTime, h3cCfgOperateState, h3cCfgOperateEndTime, h3cCfgOperFailReason }
STATUS current
DESCRIPTION
"When create h3cCfgOperateTable successfully, a
notification may be generated."
::= { h3cConfigManNotifications 2 }
h3cCfgInvalidConfigFile NOTIFICATION-TYPE
OBJECTS
{
h3cCfgOperateType,
h3cCfgOperateFileName,
h3cCfgFirstTrapTime
}
STATUS current
DESCRIPTION
"When the configuration file is invalid, this
notification will be generated."
::= { h3cConfigManNotifications 3 }
h3cConfigManConformance OBJECT IDENTIFIER ::= { h3cConfig 3 }
h3cConfigManCompliances OBJECT IDENTIFIER ::= { h3cConfigManConformance 1 }
h3cConfigManCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The statement of compliance for those implementing
the Huawei 3Com ConfigMan MIB."
MODULE -- this module
MANDATORY-GROUPS { h3cCfgManLogGroup, h3cCfgOperateGroup, h3cCfgManNotificationGroup }
OBJECT h3cCfgOperateType
SYNTAX ConfigOperationType
WRITE-SYNTAX INTEGER
{
running2Startup(1),
startup2Running(2),
running2Net(3),
net2Running(4),
net2Startup(5),
startup2Net(6)
}
DESCRIPTION
" "
::= { h3cConfigManCompliances 1 }
h3cConfigManGroups OBJECT IDENTIFIER ::= { h3cConfigManConformance 2 }
h3cCfgManLogGroup OBJECT-GROUP
OBJECTS
{ h3cCfgRunModifiedLast, h3cCfgRunSavedLast, h3cCfgStartModifiedLast, h3cCfgLogLimitedEntries, h3cCfgLogDeletedEntries,
h3cCfgLogTime, h3cCfgLogSrcCmd, h3cCfgLogTerminalType, h3cCfgLogTerminalNum, h3cCfgLogTerminalUser,
h3cCfgLogTerminalLocation, h3cCfgLogCmdSrcAddress, h3cCfgLogVirHost, h3cCfgLogServerAddress, h3cCfgLogFile,
h3cCfgLogUserName, h3cCfgLogWantBackup, h3cCfgLogSrcData, h3cCfgLogDesData }
STATUS current
DESCRIPTION
"A collection of objects configuration log group."
::= { h3cConfigManGroups 1 }
h3cCfgOperateGroup OBJECT-GROUP
OBJECTS
{ h3cCfgOperateGlobalEntryLimit, h3cCfgOperateEntryAgeOutTime, h3cCfgOperateType, h3cCfgOperateProtocol, h3cCfgOperateFileName,
h3cCfgOperateServerAddress, h3cCfgOperateUserName, h3cCfgOperateUserPassword, h3cCfgOperateTime, h3cCfgOperateEndNotificationSwitch,
h3cCfgOperateResultGlobalEntryLimit, h3cCfgOperateState, h3cCfgOperateRowStatus, h3cCfgOperateResultOptIndex,
h3cCfgOperateResultOpType, h3cCfgOperateEndTime, h3cCfgOperFailReason, h3cCfgOperateServerPort }
STATUS current
DESCRIPTION
"A group of configuration operation."
::= { h3cConfigManGroups 2 }
h3cCfgManNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { h3cCfgManEventlog, h3cCfgOperateCompletion, h3cCfgInvalidConfigFile }
STATUS current
DESCRIPTION
"Collection of notification objects."
::= { h3cConfigManGroups 3 }
END
View Git Blame Copy Permalink