2705 lines
90 KiB
Plaintext
2705 lines
90 KiB
Plaintext
--******************************************************************************
|
|
--Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
--
|
|
--$Id: fswlan.mib,v 1.1 2013/09/19 13:02:53 siva Exp $
|
|
--
|
|
--Description : This file contains MIB definitions for ISS module.
|
|
--
|
|
--******************************************************************************/
|
|
|
|
-- Supermicro WSS MIB Definition
|
|
|
|
-- MIB for 'Wireless Switch Solution'
|
|
|
|
-- The 'Wireless Switch Solution' MIB definition is as follows:
|
|
|
|
|
|
SUPERMICRO-DOT11-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
enterprises, Integer32, Unsigned32 FROM SNMPv2-SMI
|
|
ifIndex, InterfaceIndex FROM IF-MIB
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
DisplayString, TruthValue, RowStatus,
|
|
MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC;
|
|
|
|
fsDot11 MODULE-IDENTITY
|
|
LAST-UPDATED "201302150000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO
|
|
|
|
"Super Micro Computer Inc.
|
|
E-mail:support@Supermicro.com"
|
|
|
|
DESCRIPTION
|
|
"The enterprise ID 10876 is originally assigned to Super Micro Computer Inc."
|
|
REVISION "201302150000Z"
|
|
|
|
DESCRIPTION
|
|
"The MIB for AricentWSS."
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) extended(2) 83 }
|
|
|
|
-- Textual conventions
|
|
|
|
CapwapBaseRadioIdTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a radio on a WTP."
|
|
SYNTAX Unsigned32 (1..31)
|
|
|
|
CapwapDot11WlanIdTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a Wireless Local Area
|
|
Network (WLAN)."
|
|
SYNTAX Unsigned32 (1..16)
|
|
|
|
CapwapDot11WlanIdProfileTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a WLAN profile."
|
|
SYNTAX Unsigned32 (0..512)
|
|
|
|
EnabledStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A simple status value for the object."
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
|
|
-- ----------------------------------------------------------------- --
|
|
-- groups in the MIB
|
|
-- ----------------------------------------------------------------- --
|
|
|
|
fsDot11Radio OBJECT IDENTIFIER ::= { fsDot11 1 }
|
|
fsSecurityWebAuthParams OBJECT IDENTIFIER ::= { fsDot11 2 }
|
|
fsDot11smt OBJECT IDENTIFIER ::= { fsDot11 3 }
|
|
fsDot11mac OBJECT IDENTIFIER ::= { fsDot11 4 }
|
|
fsDot11phy OBJECT IDENTIFIER ::= { fsDot11 5 }
|
|
fsWlanSystem OBJECT IDENTIFIER ::= { fsDot11 6 }
|
|
|
|
fsDot11aNetworkEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To disable or enable the radio transmission for an entire 802.11a network."
|
|
DEFVAL { enabled }
|
|
::= { fsDot11Radio 1 }
|
|
|
|
fsDot11bNetworkEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To disable or enable the radio transmission for an entire 802.11b network."
|
|
DEFVAL { enabled }
|
|
::= { fsDot11Radio 2 }
|
|
|
|
fsDot11gSupport OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable the 11g suppport for all dot11b radios."
|
|
DEFVAL {disabled }
|
|
::= { fsDot11Radio 3 }
|
|
|
|
fsDot11anSupport OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To disable or enable 11n support for dot11a radios in the network."
|
|
DEFVAL { disabled }
|
|
::= { fsDot11Radio 4 }
|
|
|
|
fsDot11bnSupport OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To disable or enable 11n support for dot11b/g radios in the network."
|
|
DEFVAL { disabled }
|
|
::= { fsDot11Radio 5 }
|
|
|
|
fsDot11ManagmentSSID OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanIdProfileTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the ssid used for management of AP and radio resource
|
|
management."
|
|
DEFVAL { 0 }
|
|
::= { fsDot11Radio 6 }
|
|
|
|
fsDot11CountryString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute identifies the country or non-country
|
|
entity in which the station is operating. If it is a
|
|
country, the first two octets of this
|
|
string is the two character country code as described
|
|
in document ISO/IEC 3166-1. The third octet shall
|
|
be one of the following:
|
|
1. an ASCII space character, if the regulations under
|
|
which the station is operating encompass all
|
|
environments in the country,
|
|
2. an ASCII 'O' character, if the regulations under
|
|
which the station is operating are for an Outdoor
|
|
environment only, or
|
|
3. an ASCII 'I' character, if the regulations under
|
|
which the station is operating are for an Indoor
|
|
environment only.
|
|
4. an ASCII 'X' character, if the station is operating
|
|
under a non-country entity. The first two octets of the
|
|
non-country entity shall be two ASCII 'XX' characters."
|
|
DEFVAL { "US" }
|
|
::= { fsDot11Radio 7 }
|
|
|
|
fsSecurityWebAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER { internal(1), external(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be a set of all the Web authentication
|
|
type supported by the WLC. The following are the
|
|
default values and the associated type.
|
|
Value = 1: Internal
|
|
Value = 2: Customized
|
|
Value = 3: External"
|
|
DEFVAL { internal }
|
|
::= {fsSecurityWebAuthParams 1 }
|
|
|
|
fsSecurityWebAuthUrl OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the URL of the customised Webpage on
|
|
the external Web server. This is used in case of External Web
|
|
Authentication"
|
|
::= {fsSecurityWebAuthParams 2}
|
|
|
|
fsSecurityWebAuthRedirectUrl OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the Redirect URL to which the user will be
|
|
redirected after successful authentication."
|
|
::= {fsSecurityWebAuthParams 3}
|
|
|
|
fsSecurityWebAddr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the IP Address of the External Web Server"
|
|
::= {fsSecurityWebAuthParams 4}
|
|
|
|
fsSecurityWebAuthWebTitle OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable title in the web login
|
|
page."
|
|
DEFVAL {"Web Authentication"}
|
|
::= {fsSecurityWebAuthParams 5}
|
|
|
|
fsSecurityWebAuthWebMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable message on the web login
|
|
page."
|
|
DEFVAL {"Hello welcome aboard!"}
|
|
::= {fsSecurityWebAuthParams 6}
|
|
|
|
fsSecurityWebAuthWebLogoFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the filename containing the logo to be
|
|
displayed in the authentication page."
|
|
DEFVAL {"smc_loginnewcr.jpg"}
|
|
::= {fsSecurityWebAuthParams 7}
|
|
|
|
fsSecurityWebAuthWebSuccMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable success message to be
|
|
displayed to user when successfully authenticated."
|
|
DEFVAL {"Authenticated Successfully"}
|
|
::= {fsSecurityWebAuthParams 8}
|
|
|
|
fsSecurityWebAuthWebFailMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable Failure message to be
|
|
displayed to user when the authentication fails."
|
|
DEFVAL {"Authentication Failed"}
|
|
::= {fsSecurityWebAuthParams 9}
|
|
|
|
fsSecurityWebAuthWebButtonText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable text message to be displayed
|
|
Submit button displayed in the login page."
|
|
DEFVAL {"Submit"}
|
|
::= {fsSecurityWebAuthParams 10}
|
|
|
|
fsSecurityWebAuthWebLoadBalInfo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable load balance message to be
|
|
displayed in the login page."
|
|
::= {fsSecurityWebAuthParams 11}
|
|
|
|
fsSecurityWebAuthDisplayLang OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable language option to be
|
|
displayed in the login page."
|
|
DEFVAL {1}
|
|
::= {fsSecurityWebAuthParams 12}
|
|
|
|
fsSecurityWebAuthColor OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the customizable color option to be
|
|
displayed in the login page."
|
|
DEFVAL {1}
|
|
::= {fsSecurityWebAuthParams 13}
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11StationConfig TABLE
|
|
-- **********************************************************************
|
|
fsDot11StationConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11StationConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station Configuration Table in addition to
|
|
dot11StationConfigTable."
|
|
::= { fsDot11smt 1 }
|
|
|
|
fsDot11StationConfigEntry OBJECT-TYPE
|
|
SYNTAX FsDot11StationConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the fsDot11StationConfigTable. "
|
|
INDEX { ifIndex }
|
|
::= { fsDot11StationConfigTable 1 }
|
|
|
|
FsDot11StationConfigEntry ::=
|
|
SEQUENCE { fsDot11SupressSSID TruthValue,
|
|
fsDot11VlanId Integer32
|
|
}
|
|
|
|
fsDot11SupressSSID OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when FALSE, indicates that the
|
|
SSID will be suppressed in 802.11 Beacon and Probe
|
|
Response frames."
|
|
DEFVAL { false }
|
|
::= { fsDot11StationConfigEntry 1 }
|
|
|
|
fsDot11VlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Vlan ID mapped to the corressponding
|
|
WLAN Profile."
|
|
DEFVAL { 1 }
|
|
::= { fsDot11StationConfigEntry 2 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11CapabilityProfile TABLE
|
|
-- **********************************************************************
|
|
fsDot11CapabilityProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11CapabilityProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the WTP capability profile Configuration in addition
|
|
to dot11."
|
|
::= { fsDot11smt 2 }
|
|
|
|
fsDot11CapabilityProfileEntry OBJECT-TYPE
|
|
SYNTAX FsDot11CapabilityProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each Capability profile. There can be
|
|
upto 10 such instances."
|
|
INDEX { fsDot11CapabilityProfileName }
|
|
::= { fsDot11CapabilityProfileTable 1 }
|
|
|
|
FsDot11CapabilityProfileEntry ::=
|
|
SEQUENCE {
|
|
fsDot11CapabilityProfileName OCTET STRING,
|
|
fsDot11CFPollable TruthValue,
|
|
fsDot11CFPollRequest TruthValue,
|
|
fsDot11PrivacyOptionImplemented TruthValue,
|
|
fsDot11ShortPreambleOptionImplemented TruthValue,
|
|
fsDot11PBCCOptionImplemented TruthValue,
|
|
fsDot11ChannelAgilityPresent TruthValue,
|
|
fsDot11QosOptionImplemented TruthValue,
|
|
fsDot11SpectrumManagementRequired TruthValue,
|
|
fsDot11ShortSlotTimeOptionImplemented TruthValue,
|
|
fsDot11APSDOptionImplemented TruthValue,
|
|
fsDot11DSSSOFDMOptionEnabled TruthValue,
|
|
fsDot11DelayedBlockAckOptionImplemented TruthValue,
|
|
fsDot11ImmediateBlockAckOptionImplemented TruthValue,
|
|
fsDot11QAckOptionImplemented TruthValue,
|
|
fsDot11QueueRequestOptionImplemented TruthValue,
|
|
fsDot11TXOPRequestOptionImplemented TruthValue,
|
|
fsDot11RSNAOptionImplemented TruthValue,
|
|
fsDot11RSNAPreauthenticationImplemented TruthValue,
|
|
fsDot11CapabilityRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11CapabilityProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the capabilities table."
|
|
::= { fsDot11CapabilityProfileEntry 1 }
|
|
|
|
fsDot11CFPollable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is TRUE, it shall indicate that
|
|
the AP is able to respond to a CF-Poll with a data frame
|
|
within a SIFS time. This attribute shall be FALSE if
|
|
the AP is not able to respond to a CF-Poll with a data
|
|
frame within a SIFS time."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 2 }
|
|
|
|
fsDot11CFPollRequest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is TRUE, it shall indiate that
|
|
the AP is able to respond to CF-Poll but requesting
|
|
not to be polled. When set to FALSE, the station will
|
|
be able to respond to a CF-Poll with a data frame within
|
|
a SIFS time."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 3 }
|
|
|
|
fsDot11PrivacyOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the IEEE
|
|
802.11 WEP option is implemented. The default value of
|
|
this attribute shall be FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 4 }
|
|
|
|
fsDot11ShortPreambleOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the
|
|
short preamble option as defined in 18.2.2.2
|
|
is implemented. The default value of this attribute
|
|
shall be FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 5 }
|
|
|
|
fsDot11PBCCOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the PBCC
|
|
modulation option as defined in 18.4.6.6 is implemented.
|
|
The default value of this attribute shall be FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 6 }
|
|
|
|
fsDot11ChannelAgilityPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY is capable of
|
|
channel agility."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 7 }
|
|
|
|
fsDot11QosOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of supporting QoS. The capability
|
|
is disabled, otherwise. The default value of this attribute
|
|
is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 8 }
|
|
|
|
fsDot11SpectrumManagementRequired OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A AP will use the defined TPC and DFS procedures if and
|
|
only if this attribute is TRUE. The default value of this
|
|
attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 9 }
|
|
|
|
fsDot11ShortSlotTimeOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the Short
|
|
Slot Time option as defined in 7.3.1.4 is implemented. The
|
|
default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 10 }
|
|
|
|
fsDot11APSDOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is available only at an AP. When TRUE,
|
|
this attribute indicates that the AP implementation is
|
|
capable of delivering data and polls to stations using
|
|
APSD."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 11 }
|
|
|
|
fsDot11DSSSOFDMOptionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the
|
|
DSSS-OFDM option as defined in 19.7 is
|
|
enabled. The default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 12 }
|
|
|
|
fsDot11DelayedBlockAckOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of supporting Delayed Block Ack.
|
|
The capability is disabled, otherwise. The default value of
|
|
this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 13 }
|
|
|
|
fsDot11ImmediateBlockAckOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of supporting Immediate Block Ack.
|
|
The capability is disabled, otherwise. The default value of
|
|
this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 14 }
|
|
|
|
fsDot11QAckOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of interpreting the CF-Ack bit
|
|
in a received frame of type data even if the frame is not
|
|
directed to the QoS station. The capability is disabled,
|
|
otherwise. A AP is capable of interpreting the CF-Ack bit
|
|
in a received data frame if that station is the recipient
|
|
of the data frame, regardless of the value of this MIB
|
|
variable. The default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 15 }
|
|
|
|
fsDot11QueueRequestOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is available only at an AP. This attribute,
|
|
when TRUE, indicates that the AP is capable of processing
|
|
the Queue Size field in QoS Control field of QoS Data type
|
|
frames. The capability is disabled, otherwise. The default
|
|
value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 16 }
|
|
|
|
fsDot11TXOPRequestOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is available only at an AP. This attribute,
|
|
when TRUE, indicates that the AP is capable of processing
|
|
the TXOP Duration requested field in QoS Control field of
|
|
QoS Data type frames. The capability is disabled, otherwise.
|
|
The default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 17 }
|
|
|
|
fsDot11RSNAOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the entity is RSNA-capable."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 18 }
|
|
|
|
fsDot11RSNAPreauthenticationImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the entity supports RSNA
|
|
preauthentication. This cannot be TRUE unless
|
|
fsRSNAOptionImplemented is TRUE."
|
|
DEFVAL { false }
|
|
::= { fsDot11CapabilityProfileEntry 19 }
|
|
|
|
fsDot11CapabilityRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11ModelRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11CapabilityProfileEntry 20 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11AuthenticationProfile TABLE
|
|
-- **********************************************************************
|
|
fsDot11AuthenticationProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11AuthenticationProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the Authentication profile configured globally."
|
|
::= { fsDot11smt 3 }
|
|
|
|
fsDot11AuthenticationProfileEntry OBJECT-TYPE
|
|
SYNTAX FsDot11AuthenticationProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each authentication profile. There can be
|
|
upto 10 such instances."
|
|
INDEX { fsDot11AuthenticationProfileName }
|
|
::= { fsDot11AuthenticationProfileTable 1 }
|
|
|
|
FsDot11AuthenticationProfileEntry ::=
|
|
SEQUENCE { fsDot11AuthenticationProfileName OCTET STRING,
|
|
fsDot11AuthenticationAlgorithm INTEGER,
|
|
fsDot11WepKeyIndex Integer32,
|
|
fsDot11WepKeyType INTEGER,
|
|
fsDot11WepKeyLength Integer32,
|
|
fsDot11WepKey OCTET STRING,
|
|
fsDot11WebAuthentication Integer32,
|
|
fsDot11AuthenticationRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11AuthenticationProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the Authentication Profile table."
|
|
::= { fsDot11AuthenticationProfileEntry 1 }
|
|
|
|
fsDot11AuthenticationAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { openSystem(1), sharedKey(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be a set of all the authentication
|
|
algorithms supported by the APs. The following are the
|
|
default values and the associated algorithm.
|
|
Value = 1: Open System
|
|
Value = 2: Shared Key"
|
|
DEFVAL { 1 }
|
|
::= { fsDot11AuthenticationProfileEntry 2 }
|
|
|
|
fsDot11WepKeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this variable indicates the WEP Key Index."
|
|
::= { fsDot11AuthenticationProfileEntry 3 }
|
|
|
|
fsDot11WepKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER { hex (1),
|
|
ascii (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wep Key type indicating HEX or ASCII value."
|
|
::= { fsDot11AuthenticationProfileEntry 4 }
|
|
|
|
fsDot11WepKeyLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wep Key Length which can be either 40 or 104."
|
|
::= { fsDot11AuthenticationProfileEntry 5 }
|
|
|
|
fsDot11WepKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(104))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A WEP default secret key value. The length of the key can be 40 or 104."
|
|
::= { fsDot11AuthenticationProfileEntry 6 }
|
|
|
|
fsDot11WebAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the web authentication."
|
|
DEFVAL { disable }
|
|
::= { fsDot11AuthenticationProfileEntry 7 }
|
|
|
|
fsDot11AuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11AuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11AuthenticationProfileEntry 8 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of fsDot11AuthenticationProfile TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * fsSecurityWebAuthGuestInfo TABLE
|
|
-- **********************************************************************
|
|
fsSecurityWebAuthGuestInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsSecurityWebAuthGuestInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This (conceptual) table of attributes shall be a set of
|
|
parameters related to the Guest users."
|
|
::= {fsDot11smt 4}
|
|
|
|
fsSecurityWebAuthGuestInfoEntry OBJECT-TYPE
|
|
SYNTAX FsSecurityWebAuthGuestInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the Web Authentication s
|
|
credentials Table."
|
|
INDEX { fsSecurityWebAuthUName}
|
|
::= { fsSecurityWebAuthGuestInfoTable 1 }
|
|
|
|
FsSecurityWebAuthGuestInfoEntry ::=
|
|
SEQUENCE {fsSecurityWebAuthUName DisplayString,
|
|
fsSecurityWlanProfileId Integer32,
|
|
fsSecurityWebAuthUserLifetime Integer32,
|
|
fsSecurityWebAuthUserEmailId DisplayString,
|
|
fsSecurityWebAuthGuestInfoRowStatus RowStatus}
|
|
|
|
fsSecurityWebAuthUName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the Guest user name to login through
|
|
the Web Authentication"
|
|
::= {fsSecurityWebAuthGuestInfoEntry 1 }
|
|
|
|
fsSecurityWlanProfileId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the Wlan profileId for which the user
|
|
account is created for."
|
|
::= {fsSecurityWebAuthGuestInfoEntry 2 }
|
|
|
|
fsSecurityWebAuthUserLifetime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the lifetime(in seconds) of the Guest
|
|
user account . This value can be 60 to 2592000 seconds and when set
|
|
to zero makes the account permanent"
|
|
::= {fsSecurityWebAuthGuestInfoEntry 3 }
|
|
|
|
fsSecurityWebAuthUserEmailId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the Email address of the Guest
|
|
user . This when set to zero makes the account permanent"
|
|
::= {fsSecurityWebAuthGuestInfoEntry 4 }
|
|
|
|
fsSecurityWebAuthGuestInfoRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsSecurityWebAuthGuestInfoRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsSecurityWebAuthGuestInfoEntry 5 }
|
|
-- **********************************************************************
|
|
-- * End of fsSecurityWebAuthGuestInfo TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * fsStationQosParams TABLE
|
|
-- **********************************************************************
|
|
fsStationQosParamsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsStationQosParamsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This (conceptual) table of attributes shall be a set of
|
|
QoS parameters related to the Station QoS."
|
|
::= {fsDot11smt 5}
|
|
|
|
fsStationQosParamsEntry OBJECT-TYPE
|
|
SYNTAX FsStationQosParamsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the Station QoS
|
|
Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry. Interface tables in this MIB module are indexed
|
|
by ifIndex."
|
|
INDEX { ifIndex,
|
|
fsStaMacAddress }
|
|
::= { fsStationQosParamsTable 1 }
|
|
|
|
FsStationQosParamsEntry ::=
|
|
SEQUENCE {fsStaMacAddress MacAddress,
|
|
fsStaQoSPriority Integer32,
|
|
fsStaQoSDscp Integer32 }
|
|
|
|
fsStaMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be Mac address of the Station"
|
|
::= {fsStationQosParamsEntry 1 }
|
|
|
|
fsStaQoSPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the priority values to be
|
|
used if the packets are to be IEEE 802.1p tagged
|
|
(3-bits)."
|
|
::= {fsStationQosParamsEntry 2 }
|
|
|
|
fsStaQoSDscp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be the dscp label of 6-bits."
|
|
::= {fsStationQosParamsEntry 3 }
|
|
|
|
-- **********************************************************************
|
|
-- * End of fsStationQosParams TABLE
|
|
-- **********************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * fsVlanIsolation TABLE
|
|
-- **********************************************************************
|
|
fsVlanIsolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsVlanIsolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table to determine whether the VLAN traffic for different SSID
|
|
needs to be isolated.This will be configured per WLAN profile"
|
|
::= { fsDot11smt 6 }
|
|
|
|
fsVlanIsolationEntry OBJECT-TYPE
|
|
SYNTAX FsVlanIsolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in VLAN isolation table for each VLAN ID."
|
|
INDEX { ifIndex }
|
|
::= { fsVlanIsolationTable 1 }
|
|
|
|
FsVlanIsolationEntry ::=
|
|
SEQUENCE { fsVlanIsolation INTEGER }
|
|
|
|
fsVlanIsolation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable the VLAN isolation feature."
|
|
DEFVAL { disable }
|
|
::= { fsVlanIsolationEntry 1 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11RadioConfig TABLE
|
|
-- **********************************************************************
|
|
fsDot11RadioConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11RadioConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WTP Radio Configuration Information."
|
|
::= { fsDot11smt 7 }
|
|
|
|
fsDot11RadioConfigEntry OBJECT-TYPE
|
|
SYNTAX FsDot11RadioConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the fsDot11RadioConfigTable, representing the radio configuration
|
|
in addition to the configuration available in IEEE802dot11-MIB."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11RadioConfigTable 1 }
|
|
|
|
FsDot11RadioConfigEntry ::=
|
|
SEQUENCE { fsDot11RadioType INTEGER,
|
|
fsDot11RadioNoOfBssIdSupported Integer32,
|
|
fsDot11RadioAntennaType Integer32,
|
|
fsDot11RadioFailureStatus Integer32,
|
|
fsDot11RowStatus RowStatus
|
|
}
|
|
|
|
fsDot11RadioType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b (1),
|
|
dot11a (2),
|
|
dot11g (4),
|
|
dot11bg (5),
|
|
dot11an (10),
|
|
dot11bgn (13)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the current operating 802.11 a, b or g network."
|
|
DEFVAL { dot11b }
|
|
::= { fsDot11RadioConfigEntry 1 }
|
|
|
|
fsDot11RadioNoOfBssIdSupported OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of BSSID supported by radio interface"
|
|
::= {fsDot11RadioConfigEntry 2 }
|
|
|
|
fsDot11RadioAntennaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transmitter (1),
|
|
receiver (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicating the Antenna type in which the failure occured"
|
|
::= { fsDot11RadioConfigEntry 3 }
|
|
|
|
fsDot11RadioFailureStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
set (1),
|
|
clear (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Radio failure occured or cleared"
|
|
::= { fsDot11RadioConfigEntry 4 }
|
|
|
|
fsDot11RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11AuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11RadioConfigEntry 15 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11QosProfile TABLE
|
|
-- **********************************************************************
|
|
fsDot11QosProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11QosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS profile configured globally."
|
|
::= { fsDot11smt 8}
|
|
|
|
fsDot11QosProfileEntry OBJECT-TYPE
|
|
SYNTAX FsDot11QosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each QoS profile. There can be
|
|
upto 10 such instances."
|
|
INDEX { fsDot11QosProfileName }
|
|
::= { fsDot11QosProfileTable 1 }
|
|
|
|
FsDot11QosProfileEntry ::=
|
|
SEQUENCE { fsDot11QosProfileName OCTET STRING,
|
|
fsDot11QosTraffic INTEGER,
|
|
fsDot11QosPassengerTrustMode INTEGER,
|
|
fsDot11QosRateLimit INTEGER,
|
|
fsDot11UpStreamCIR Integer32,
|
|
fsDot11UpStreamCBS Integer32,
|
|
fsDot11UpStreamEIR Integer32,
|
|
fsDot11UpStreamEBS Integer32,
|
|
fsDot11DownStreamCIR Integer32,
|
|
fsDot11DownStreamCBS Integer32,
|
|
fsDot11DownStreamEIR Integer32,
|
|
fsDot11DownStreamEBS Integer32,
|
|
fsDot11QosRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11QosProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the Qos Profile table."
|
|
::= { fsDot11QosProfileEntry 1 }
|
|
|
|
fsDot11QosTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER { bestEffort (1),
|
|
video (2),
|
|
voice (3),
|
|
background (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the type of Qos Traffic used by
|
|
this profile"
|
|
DEFVAL { bestEffort }
|
|
::= { fsDot11QosProfileEntry 2 }
|
|
|
|
fsDot11QosPassengerTrustMode OBJECT-TYPE
|
|
SYNTAX INTEGER { enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the passenger trust mode."
|
|
DEFVAL { disable }
|
|
::= { fsDot11QosProfileEntry 3 }
|
|
|
|
fsDot11QosRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER { enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Qos Rate Limit."
|
|
DEFVAL { disable }
|
|
::= { fsDot11QosProfileEntry 4 }
|
|
|
|
fsDot11UpStreamCIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CIR value for Upstream traffic."
|
|
DEFVAL { 100 }
|
|
::= { fsDot11QosProfileEntry 5 }
|
|
|
|
fsDot11UpStreamCBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CBS value for Upstream traffic."
|
|
DEFVAL { 1000 }
|
|
::= { fsDot11QosProfileEntry 6 }
|
|
|
|
fsDot11UpStreamEIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EIR value for Upstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11QosProfileEntry 7 }
|
|
|
|
fsDot11UpStreamEBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EBS value for Upstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11QosProfileEntry 8 }
|
|
|
|
fsDot11DownStreamCIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CIR value for Downstream traffic."
|
|
DEFVAL { 100 }
|
|
::= { fsDot11QosProfileEntry 9 }
|
|
|
|
fsDot11DownStreamCBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CBS value for Downstream traffic."
|
|
DEFVAL { 1000 }
|
|
::= { fsDot11QosProfileEntry 10 }
|
|
|
|
fsDot11DownStreamEIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EIR value for Downstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11QosProfileEntry 11 }
|
|
|
|
fsDot11DownStreamEBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EBS value for Downstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11QosProfileEntry 12 }
|
|
|
|
fsDot11QosRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11AuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11QosProfileEntry 13 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11WlanCapabilityProfile TABLE
|
|
-- **********************************************************************
|
|
fsDot11WlanCapabilityProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11WlanCapabilityProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the WTP capability profile Configuration in addition
|
|
to dot11."
|
|
::= { fsDot11smt 9 }
|
|
|
|
fsDot11WlanCapabilityProfileEntry OBJECT-TYPE
|
|
SYNTAX FsDot11WlanCapabilityProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each Capability profile. There can be
|
|
upto 10 such instances."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11WlanCapabilityProfileTable 1 }
|
|
|
|
FsDot11WlanCapabilityProfileEntry ::=
|
|
SEQUENCE {
|
|
fsDot11WlanCFPollable TruthValue,
|
|
fsDot11WlanCFPollRequest TruthValue,
|
|
fsDot11WlanPrivacyOptionImplemented TruthValue,
|
|
fsDot11WlanShortPreambleOptionImplemented TruthValue,
|
|
fsDot11WlanPBCCOptionImplemented TruthValue,
|
|
fsDot11WlanChannelAgilityPresent TruthValue,
|
|
fsDot11WlanQosOptionImplemented TruthValue,
|
|
fsDot11WlanSpectrumManagementRequired TruthValue,
|
|
fsDot11WlanShortSlotTimeOptionImplemented TruthValue,
|
|
fsDot11WlanAPSDOptionImplemented TruthValue,
|
|
fsDot11WlanDSSSOFDMOptionEnabled TruthValue,
|
|
fsDot11WlanDelayedBlockAckOptionImplemented TruthValue,
|
|
fsDot11WlanImmediateBlockAckOptionImplemented TruthValue,
|
|
fsDot11WlanQAckOptionImplemented TruthValue,
|
|
fsDot11WlanQueueRequestOptionImplemented TruthValue,
|
|
fsDot11WlanTXOPRequestOptionImplemented TruthValue,
|
|
fsDot11WlanRSNAOptionImplemented TruthValue,
|
|
fsDot11WlanRSNAPreauthenticationImplemented TruthValue,
|
|
fsDot11WlanCapabilityRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11WlanCFPollable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is TRUE, it shall indicate that
|
|
the AP is able to respond to a CF-Poll with a data frame
|
|
within a SIFS time. This attribute shall be FALSE if
|
|
the AP is not able to respond to a CF-Poll with a data
|
|
frame within a SIFS time."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 1 }
|
|
|
|
fsDot11WlanCFPollRequest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is TRUE, it shall indiate that
|
|
the AP is able to respond to CF-Poll but requesting
|
|
not to be polled. When set to FALSE, the station will
|
|
be able to respond to a CF-Poll with a data frame within
|
|
a SIFS time."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 2 }
|
|
|
|
fsDot11WlanPrivacyOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the IEEE
|
|
802.11 WEP option is implemented. The default value of
|
|
this attribute shall be FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 3 }
|
|
|
|
fsDot11WlanShortPreambleOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the
|
|
short preamble option as defined in 18.2.2.2
|
|
is implemented. The default value of this attribute
|
|
shall be FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 4 }
|
|
|
|
fsDot11WlanPBCCOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the PBCC
|
|
modulation option as defined in 18.4.6.6 is implemented.
|
|
The default value of this attribute shall be FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 5 }
|
|
|
|
fsDot11WlanChannelAgilityPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY is capable of
|
|
channel agility."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 6 }
|
|
|
|
fsDot11WlanQosOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of supporting QoS. The capability
|
|
is disabled, otherwise. The default value of this attribute
|
|
is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 7 }
|
|
|
|
fsDot11WlanSpectrumManagementRequired OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A AP will use the defined TPC and DFS procedures if and
|
|
only if this attribute is TRUE. The default value of this
|
|
attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 8 }
|
|
|
|
fsDot11WlanShortSlotTimeOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the Short
|
|
Slot Time option as defined in 7.3.1.4 is implemented. The
|
|
default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 9 }
|
|
|
|
fsDot11WlanAPSDOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is available only at an AP. When TRUE,
|
|
this attribute indicates that the AP implementation is
|
|
capable of delivering data and polls to stations using
|
|
APSD."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 10 }
|
|
|
|
fsDot11WlanDSSSOFDMOptionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, shall indicate that the
|
|
DSSS-OFDM option as defined in 19.7 is
|
|
enabled. The default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 11 }
|
|
|
|
fsDot11WlanDelayedBlockAckOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of supporting Delayed Block Ack.
|
|
The capability is disabled, otherwise. The default value of
|
|
this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 12 }
|
|
|
|
fsDot11WlanImmediateBlockAckOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of supporting Immediate Block Ack.
|
|
The capability is disabled, otherwise. The default value of
|
|
this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 13 }
|
|
|
|
fsDot11WlanQAckOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station
|
|
implementation is capable of interpreting the CF-Ack bit
|
|
in a received frame of type data even if the frame is not
|
|
directed to the QoS station. The capability is disabled,
|
|
otherwise. A AP is capable of interpreting the CF-Ack bit
|
|
in a received data frame if that station is the recipient
|
|
of the data frame, regardless of the value of this MIB
|
|
variable. The default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 14 }
|
|
|
|
fsDot11WlanQueueRequestOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is available only at an AP. This attribute,
|
|
when TRUE, indicates that the AP is capable of processing
|
|
the Queue Size field in QoS Control field of QoS Data type
|
|
frames. The capability is disabled, otherwise. The default
|
|
value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 15 }
|
|
|
|
fsDot11WlanTXOPRequestOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is available only at an AP. This attribute,
|
|
when TRUE, indicates that the AP is capable of processing
|
|
the TXOP Duration requested field in QoS Control field of
|
|
QoS Data type frames. The capability is disabled, otherwise.
|
|
The default value of this attribute is FALSE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 16 }
|
|
|
|
fsDot11WlanRSNAOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the entity is RSNA-capable."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 17 }
|
|
|
|
fsDot11WlanRSNAPreauthenticationImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the entity supports RSNA
|
|
preauthentication. This cannot be TRUE unless
|
|
fsRSNAOptionImplemented is TRUE."
|
|
DEFVAL { false }
|
|
::= { fsDot11WlanCapabilityProfileEntry 18 }
|
|
|
|
fsDot11WlanCapabilityRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11ModelRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11WlanCapabilityProfileEntry 19 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11AuthenticationProfile TABLE
|
|
-- **********************************************************************
|
|
fsDot11WlanAuthenticationProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11WlanAuthenticationProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the Authentication profile configured globally."
|
|
::= { fsDot11smt 10 }
|
|
|
|
fsDot11WlanAuthenticationProfileEntry OBJECT-TYPE
|
|
SYNTAX FsDot11WlanAuthenticationProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each authentication profile. There can be
|
|
upto 10 such instances."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11WlanAuthenticationProfileTable 1 }
|
|
|
|
FsDot11WlanAuthenticationProfileEntry ::=
|
|
SEQUENCE { fsDot11WlanAuthenticationAlgorithm INTEGER,
|
|
fsDot11WlanWepKeyIndex Integer32,
|
|
fsDot11WlanWepKeyType INTEGER,
|
|
fsDot11WlanWepKeyLength Integer32,
|
|
fsDot11WlanWepKey OCTET STRING,
|
|
fsDot11WlanWebAuthentication INTEGER,
|
|
fsDot11WlanAuthenticationRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11WlanAuthenticationAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { openSystem(1), sharedKey(2), webAuth(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall be a set of all the authentication
|
|
algorithms supported by the APs. The following are the
|
|
default values and the associated algorithm.
|
|
Value = 1: Open System
|
|
Value = 2: Shared Key
|
|
Value = 3: Web Auth"
|
|
DEFVAL { 1 }
|
|
::= { fsDot11WlanAuthenticationProfileEntry 1 }
|
|
|
|
fsDot11WlanWepKeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this variable indicates the WEP Key Index."
|
|
::= { fsDot11WlanAuthenticationProfileEntry 2 }
|
|
|
|
fsDot11WlanWepKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER { hex (1),
|
|
ascii (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wep Key type indicating HEX or ASCII value."
|
|
::= { fsDot11WlanAuthenticationProfileEntry 3 }
|
|
|
|
fsDot11WlanWepKeyLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wep Key Length which can be either 40 or 104."
|
|
::= { fsDot11WlanAuthenticationProfileEntry 4 }
|
|
|
|
fsDot11WlanWepKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(104))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A WEP default secret key value. The length of the key can be 40 or 104."
|
|
::= { fsDot11WlanAuthenticationProfileEntry 5 }
|
|
|
|
fsDot11WlanWebAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the web authentication."
|
|
DEFVAL { disabled }
|
|
::= { fsDot11WlanAuthenticationProfileEntry 6 }
|
|
|
|
fsDot11WlanAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11AuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11WlanAuthenticationProfileEntry 7 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11WlanQosProfile TABLE
|
|
-- **********************************************************************
|
|
fsDot11WlanQosProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11WlanQosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS profile configured globally."
|
|
::= { fsDot11smt 11 }
|
|
|
|
fsDot11WlanQosProfileEntry OBJECT-TYPE
|
|
SYNTAX FsDot11WlanQosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each QoS profile. There can be
|
|
upto 10 such instances."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11WlanQosProfileTable 1 }
|
|
|
|
FsDot11WlanQosProfileEntry ::=
|
|
SEQUENCE {
|
|
fsDot11WlanQosTraffic INTEGER,
|
|
fsDot11WlanQosPassengerTrustMode INTEGER,
|
|
fsDot11WlanQosRateLimit INTEGER,
|
|
fsDot11WlanUpStreamCIR Integer32,
|
|
fsDot11WlanUpStreamCBS Integer32,
|
|
fsDot11WlanUpStreamEIR Integer32,
|
|
fsDot11WlanUpStreamEBS Integer32,
|
|
fsDot11WlanDownStreamCIR Integer32,
|
|
fsDot11WlanDownStreamCBS Integer32,
|
|
fsDot11WlanDownStreamEIR Integer32,
|
|
fsDot11WlanDownStreamEBS Integer32,
|
|
fsDot11WlanQosRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11WlanQosTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER { bestEffort (1),
|
|
video (2),
|
|
voice (3),
|
|
background (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the type of Qos Traffic used by
|
|
this profile"
|
|
DEFVAL { bestEffort }
|
|
::= { fsDot11WlanQosProfileEntry 1 }
|
|
|
|
fsDot11WlanQosPassengerTrustMode OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the passenger trust mode."
|
|
DEFVAL { disabled }
|
|
::= { fsDot11WlanQosProfileEntry 2 }
|
|
|
|
fsDot11WlanQosRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Qos Rate Limit."
|
|
DEFVAL { disabled }
|
|
::= { fsDot11WlanQosProfileEntry 3 }
|
|
|
|
fsDot11WlanUpStreamCIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CIR value for Upstream traffic."
|
|
DEFVAL { 100 }
|
|
::= { fsDot11WlanQosProfileEntry 4 }
|
|
|
|
fsDot11WlanUpStreamCBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CBS value for Upstream traffic."
|
|
DEFVAL { 1000 }
|
|
::= { fsDot11WlanQosProfileEntry 5 }
|
|
|
|
fsDot11WlanUpStreamEIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EIR value for Upstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11WlanQosProfileEntry 6 }
|
|
|
|
fsDot11WlanUpStreamEBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EBS value for Upstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11WlanQosProfileEntry 7 }
|
|
|
|
fsDot11WlanDownStreamCIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CIR value for Downstream traffic."
|
|
DEFVAL { 100 }
|
|
::= { fsDot11WlanQosProfileEntry 8 }
|
|
|
|
fsDot11WlanDownStreamCBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure CBS value for Downstream traffic."
|
|
DEFVAL { 1000 }
|
|
::= { fsDot11WlanQosProfileEntry 9 }
|
|
|
|
fsDot11WlanDownStreamEIR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EIR value for Downstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11WlanQosProfileEntry 10 }
|
|
|
|
fsDot11WlanDownStreamEBS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure EBS value for Downstream traffic."
|
|
DEFVAL { 15000 }
|
|
::= { fsDot11WlanQosProfileEntry 11 }
|
|
|
|
fsDot11WlanQosRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11AuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsDot11WlanQosProfileEntry 12 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11CapabilityMapping TABLE
|
|
-- **********************************************************************
|
|
fsDot11CapabilityMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11CapabilityMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS configuration information for the WTP.
|
|
This table shall contain an entry for each virtual radio interface
|
|
index."
|
|
::= { fsDot11smt 12 }
|
|
|
|
fsDot11CapabilityMappingEntry OBJECT-TYPE
|
|
SYNTAX FsDot11CapabilityMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the WTP Qos Configuration Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11CapabilityMappingTable 1 }
|
|
|
|
FsDot11CapabilityMappingEntry ::=
|
|
SEQUENCE {
|
|
fsDot11CapabilityMappingProfileName OCTET STRING,
|
|
fsDot11CapabilityMappingRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11CapabilityMappingProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the capabilities table."
|
|
::= { fsDot11CapabilityMappingEntry 1 }
|
|
|
|
fsDot11CapabilityMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create or delete a row
|
|
in this table."
|
|
::= { fsDot11CapabilityMappingEntry 2 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11AuthMapping TABLE
|
|
-- **********************************************************************
|
|
fsDot11AuthMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11AuthMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS configuration information for the WTP.
|
|
This table shall contain an entry for each virtual radio interface
|
|
index."
|
|
::= { fsDot11smt 13 }
|
|
|
|
fsDot11AuthMappingEntry OBJECT-TYPE
|
|
SYNTAX FsDot11AuthMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the WTP Qos Configuration Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11AuthMappingTable 1 }
|
|
|
|
FsDot11AuthMappingEntry ::=
|
|
SEQUENCE {
|
|
fsDot11AuthMappingProfileName OCTET STRING,
|
|
fsDot11AuthMappingRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11AuthMappingProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the Authentication Profile table."
|
|
::= { fsDot11AuthMappingEntry 1 }
|
|
|
|
fsDot11AuthMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create or delete a row
|
|
in this table."
|
|
::= { fsDot11AuthMappingEntry 2 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11QosMapping TABLE
|
|
-- **********************************************************************
|
|
fsDot11QosMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11QosMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS configuration information for the WTP.
|
|
This table shall contain an entry for each virtual radio interface
|
|
index."
|
|
::= { fsDot11smt 14 }
|
|
|
|
fsDot11QosMappingEntry OBJECT-TYPE
|
|
SYNTAX FsDot11QosMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the WTP Qos Configuration Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { ifIndex }
|
|
::= { fsDot11QosMappingTable 1 }
|
|
|
|
FsDot11QosMappingEntry ::=
|
|
SEQUENCE {
|
|
fsDot11QosMappingProfileName OCTET STRING,
|
|
fsDot11QosMappingRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11QosMappingProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the Qos Profile table."
|
|
::= { fsDot11QosMappingEntry 1 }
|
|
|
|
fsDot11QosMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create or delete a row
|
|
in this table."
|
|
::= { fsDot11QosMappingEntry 2 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11ClientSummary TABLE
|
|
-- **********************************************************************
|
|
fsDot11ClientSummaryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11ClientSummaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table stores the station related information."
|
|
::= { fsDot11smt 15 }
|
|
|
|
fsDot11ClientSummaryEntry OBJECT-TYPE
|
|
SYNTAX FsDot11ClientSummaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the Client related information.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { fsDot11ClientMacAddress }
|
|
::= { fsDot11ClientSummaryTable 1 }
|
|
|
|
FsDot11ClientSummaryEntry ::=
|
|
SEQUENCE {
|
|
fsDot11ClientMacAddress MacAddress,
|
|
fsDot11WlanProfileId CapwapDot11WlanIdProfileTC,
|
|
fsDot11WtpProfileName SnmpAdminString,
|
|
fsDot11WtpRadioId CapwapBaseRadioIdTC,
|
|
fsDot11AuthStatus TruthValue,
|
|
fsDot11AssocStatus TruthValue
|
|
}
|
|
|
|
fsDot11ClientMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the index of the Client summary Table."
|
|
::= { fsDot11ClientSummaryEntry 1 }
|
|
|
|
fsDot11WlanProfileId OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanIdProfileTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the WLAN profile for which the station
|
|
is associated."
|
|
::= { fsDot11ClientSummaryEntry 2 }
|
|
|
|
fsDot11WtpProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the WTP Profile for which the station
|
|
is associated."
|
|
::= { fsDot11ClientSummaryEntry 3 }
|
|
|
|
fsDot11WtpRadioId OBJECT-TYPE
|
|
SYNTAX CapwapBaseRadioIdTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the WTP Radio Id in which the station
|
|
is associated."
|
|
::= { fsDot11ClientSummaryEntry 4 }
|
|
|
|
fsDot11AuthStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the Authentication status of the
|
|
station."
|
|
::= { fsDot11ClientSummaryEntry 5 }
|
|
|
|
fsDot11AssocStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the Association status of the
|
|
station."
|
|
::= { fsDot11ClientSummaryEntry 6 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11RadioQoS TABLE
|
|
-- **********************************************************************
|
|
|
|
fsDot11RadioQosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11RadioQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS configuration information for the WTP.
|
|
This table shall contain an entry for each virtual radio interface
|
|
index."
|
|
::= { fsDot11mac 1 }
|
|
|
|
fsDot11RadioQosEntry OBJECT-TYPE
|
|
SYNTAX FsDot11RadioQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the WTP Qos Configuration Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { ifIndex }
|
|
::= {fsDot11RadioQosTable 1}
|
|
|
|
FsDot11RadioQosEntry ::=
|
|
SEQUENCE { fsDot11TaggingPolicy BITS
|
|
}
|
|
|
|
fsDot11TaggingPolicy OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
dot1p (0),
|
|
dot1q (1),
|
|
dscp (2),
|
|
outerHeader (3),
|
|
innerHeader (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the bit field indicating how the WTP is to mark
|
|
packets for QoS purposes."
|
|
DEFVAL { 0 }
|
|
::= {fsDot11RadioQosEntry 1}
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11QAP TABLE
|
|
-- **********************************************************************
|
|
|
|
fsDot11QAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11QAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS configuration information for the WTP.
|
|
This table shall contain an entry for each virtual radio interface
|
|
index."
|
|
::= { fsDot11mac 2 }
|
|
|
|
fsDot11QAPEntry OBJECT-TYPE
|
|
SYNTAX FsDot11QAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the WTP Qos Configuration Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { ifIndex,
|
|
dot11EDCATableIndex }
|
|
::= {fsDot11QAPTable 1}
|
|
|
|
FsDot11QAPEntry ::=
|
|
SEQUENCE { fsDot11QueueDepth Integer32,
|
|
fsDot11PriorityValue Integer32,
|
|
fsDot11DscpValue Integer32
|
|
}
|
|
|
|
fsDot11QueueDepth OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of packets that can be on the specific
|
|
QoS transmit queue at any given time."
|
|
::= {fsDot11QAPEntry 2}
|
|
|
|
fsDot11PriorityValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the priority value for incoming packets from station."
|
|
DEFVAL { 0 }
|
|
::= {fsDot11QAPEntry 3}
|
|
|
|
fsDot11DscpValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the DSCP value marked for QoS purposes."
|
|
DEFVAL { 0 }
|
|
::= {fsDot11QAPEntry 4}
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11QAP TABLE
|
|
-- **********************************************************************
|
|
|
|
fsQAPProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsQAPProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the QoS configuration information for the WTP.
|
|
This table shall contain an entry for each virtual radio interface
|
|
index."
|
|
::= { fsDot11mac 3 }
|
|
|
|
fsQAPProfileEntry OBJECT-TYPE
|
|
SYNTAX FsQAPProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the WTP Qos Configuration Table.
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry."
|
|
INDEX { fsQAPProfileName, fsQAPProfileIndex }
|
|
::= {fsQAPProfileTable 1}
|
|
|
|
FsQAPProfileEntry ::=
|
|
SEQUENCE { fsQAPProfileName OCTET STRING,
|
|
fsQAPProfileIndex Integer32,
|
|
fsQAPProfileCWmin Integer32,
|
|
fsQAPProfileCWmax Integer32,
|
|
fsQAPProfileAIFSN Integer32,
|
|
fsQAPProfileTXOPLimit Integer32,
|
|
fsQAPProfileQueueDepth Integer32,
|
|
fsQAPProfilePriorityValue Integer32,
|
|
fsQAPProfileDscpValue Integer32,
|
|
fsQAPProfileRowStatus RowStatus
|
|
}
|
|
|
|
fsQAPProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the QoS Profile which will be default get applied to
|
|
any WTP Profile when configured."
|
|
::= { fsQAPProfileEntry 1 }
|
|
|
|
fsQAPProfileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The auxiliary variable used to identify instances of the columnar
|
|
objects in the EDCA Table. The value of this variable is
|
|
1) 1, if the value of the AC is AC_BK.
|
|
2) 2, if the value of the AC is AC_BE.
|
|
3) 3, if the value of the AC is AC_VI.
|
|
4) 4, if the value of the AC is AC_VO."
|
|
::= { fsQAPProfileEntry 2 }
|
|
|
|
fsQAPProfileCWmin OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the value of the minimum size of the
|
|
window that shall be used by an AP for a particular AC for
|
|
generating a random number for the backoff. The value of this
|
|
attribute shall be such that it could always be expressed in the
|
|
form of 2X - 1, where X is an integer. The default value for this
|
|
attribute is
|
|
1) aCWmin, if dot11QAPEDCATableIndex is 1 or 2.
|
|
2) (aCWmin+1)/2 - 1, if dot11QAPEDCATableIndex is 3.
|
|
3) (aCWmin+1)/4 - 1, if dot11QAPEDCATableIndex is 4."
|
|
::= { fsQAPProfileEntry 3 }
|
|
|
|
fsQAPProfileCWmax OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the value of the maximum size of the
|
|
window that shall be used by an AP for a particular AC for
|
|
generating a random number for the backoff. The value of this
|
|
attribute shall be such that it could always be expressed in the
|
|
form of 2X - 1, where X is an integer. The default value for this
|
|
attribute is
|
|
1) aCWmax, if dot11QAPEDCATableIndex is 1.
|
|
2) 4*(aCWmin+1) - 1, if dot11QAPEDCATableIndex is 2.
|
|
3) aCWmin, if dot11QAPEDCATableIndex is 3.
|
|
4) (aCWmin+1)/2 - 1, if dot11QAPEDCATableIndex is 4."
|
|
::= { fsQAPProfileEntry 4 }
|
|
|
|
fsQAPProfileAIFSN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of slots, after a SIFS
|
|
duration, that the AP, for a particular AC, shall sense the
|
|
medium idle either before transmitting or executing a backoff. The
|
|
default value for this attribute is
|
|
1) 7, if dot11QAPEDCATableIndex is 1,
|
|
2) 3, if dot11QAPEDCATableIndex is 2
|
|
3) 1, otherwise."
|
|
::= { fsQAPProfileEntry 5 }
|
|
|
|
fsQAPProfileTXOPLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the maximum number of microseconds of
|
|
an EDCA TXOP for a given AC at a non-AP STA. The default value for
|
|
this attribute is
|
|
1) 0 for all PHYs, if dot11EDCATableIndex is 1 or 2; this
|
|
implies that the sender can send one MSDU in an EDCA TXOP,
|
|
2) 3008 microseconds for Clause 17 and Clause 19 PHY and 6016
|
|
microseconds for Clause 18 PHY, if dot11EDCATableIndex is 3,
|
|
3) 1504 microseconds for Clause 17 and Clause 19 PHY and 3264
|
|
microseconds for Clause 18 PHY, if dot11EDCATableIndex is 4."
|
|
::= { fsQAPProfileEntry 6 }
|
|
|
|
fsQAPProfileQueueDepth OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of packets that can be on the specific
|
|
QoS transmit queue at any given time."
|
|
::= { fsQAPProfileEntry 7 }
|
|
|
|
fsQAPProfilePriorityValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the priority value for incoming packets from station."
|
|
DEFVAL { 0 }
|
|
::= { fsQAPProfileEntry 8 }
|
|
|
|
fsQAPProfileDscpValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the DSCP value marked for QoS purposes."
|
|
DEFVAL { 0 }
|
|
::= { fsQAPProfileEntry 9 }
|
|
|
|
fsQAPProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsDot11AuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsQAPProfileEntry 10 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsDot11AntennaList TABLE
|
|
-- **********************************************************************
|
|
fsDot11AntennasListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11AntennasListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the list of antennae. Each entry in this
|
|
table represents a single antenna with its properties(antenna selection).
|
|
The maximum number of antennae that can be contained in this table is 255."
|
|
::= { fsDot11phy 1 }
|
|
|
|
fsDot11AntennasListEntry OBJECT-TYPE
|
|
SYNTAX FsDot11AntennasListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the fsDot11AntennasListTable, representing
|
|
the properties of a single antenna. This table is
|
|
an enhancement to the table in IEEE802dot11-MIB.
|
|
ifIndex - Each IEEE 802.11 interface is represented by
|
|
an ifEntry. Interface tables in this MIB module are indexed
|
|
by ifIndex."
|
|
INDEX { ifIndex,
|
|
dot11AntennaListIndex }
|
|
::= { fsDot11AntennasListTable 1 }
|
|
|
|
FsDot11AntennasListEntry ::=
|
|
SEQUENCE { fsAntennaMode INTEGER,
|
|
fsAntennaSelection INTEGER }
|
|
|
|
fsAntennaMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sectorA (1),
|
|
sectorB (2),
|
|
omni (3),
|
|
mimo (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure an AP to use one internal antenna for an 802.11 sectorized
|
|
180-degree coverage pattern or both internal antennas for an 802.11
|
|
360-degree omnidirectional pattern.
|
|
|
|
sectorA - Specifies to use only the left internal antenna.
|
|
sectorB - Specifies to use only the right internal antenna
|
|
omni - Specifies to use both internal antennas.
|
|
mimo - Specifies to use multiple antennas at both transmitter and receiver."
|
|
DEFVAL { omni }
|
|
::= { fsDot11AntennasListEntry 1 }
|
|
|
|
fsAntennaSelection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
external(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To select the internal or external antenna selection for an access point.
|
|
There can be 255 antennas configured."
|
|
DEFVAL { internal }
|
|
::= { fsDot11AntennasListEntry 2 }
|
|
|
|
-- fsDot11WlanTable Table
|
|
fsDot11WlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11WlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that allows the operator to display and configure
|
|
WLAN profiles, such as specifying the MAC type and tunnel mode
|
|
for a WLAN. Also, it helps the AC to configure a WLAN through
|
|
the IEEE 802.11 MIB module.
|
|
Values of all objects in this table are persistent at
|
|
restart/reboot."
|
|
::= { fsDot11phy 2 }
|
|
|
|
fsDot11WlanEntry OBJECT-TYPE
|
|
SYNTAX FsDot11WlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that stores the settings of a WLAN profile."
|
|
INDEX { capwapDot11WlanProfileId }
|
|
::= { fsDot11WlanTable 1 }
|
|
|
|
FsDot11WlanEntry ::=
|
|
SEQUENCE {
|
|
fsDot11WlanProfileIfIndex InterfaceIndex,
|
|
fsDot11WlanRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11WlanProfileIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index value that uniquely identifies a
|
|
WLAN Profile Interface. The interface identified by a
|
|
particular value of this index is the same interface as
|
|
identified by the same value of the ifIndex.
|
|
The creation of a row object in the capwapDot11WlanTable
|
|
triggers the AC to automatically create an WLAN Profile
|
|
Interface identified by an ifIndex without manual
|
|
intervention.
|
|
Most MIB tables in the IEEE 802.11 MIB module
|
|
[IEEE.802-11.2007] use an ifIndex to identify an interface
|
|
to facilitate the configuration and maintenance, for example,
|
|
dot11AuthenticationAlgorithmsTable.
|
|
Using the ifIndex of a WLAN Profile Interface, the Operator
|
|
could configure a WLAN through the IEEE 802.11 MIB module."
|
|
::= { fsDot11WlanEntry 1 }
|
|
|
|
fsDot11WlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The capwapDot11WlanRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row with
|
|
MAX-ACCESS read-create have been assigned valid values.
|
|
|
|
When the operator deletes a WLAN profile, the AC SHOULD
|
|
check whether the WLAN profile is bound with a radio.
|
|
If yes, the value of the Response-PDU's error-status field
|
|
is set to 'inconsistentValue', and the value of its
|
|
error-index field is set to the index of the failed variable
|
|
binding. If not, the row object could be deleted."
|
|
::= { fsDot11WlanEntry 2 }
|
|
|
|
-- End of capwapDot11WlanTable Table
|
|
|
|
-- fsDot11WlanBindTable Table
|
|
|
|
fsDot11WlanBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11WlanBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that stores bindings between WLAN profiles
|
|
(identified by capwapDot11WlanProfileId) and WTP Virtual Radio
|
|
Interfaces. The WTP Virtual Radio Interfaces on the AC
|
|
correspond to physical layer (PHY) radios on the WTPs.
|
|
It also stores the mappings between WLAN IDs and WLAN
|
|
Basic Service Set (BSS) Interfaces.
|
|
Values of all objects in this table are persistent at
|
|
restart/reboot."
|
|
::= { fsDot11phy 3 }
|
|
|
|
fsDot11WlanBindEntry OBJECT-TYPE
|
|
SYNTAX FsDot11WlanBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that stores the binding of a WLAN profile
|
|
to a WTP Virtual Radio Interface. It also stores the mapping
|
|
between WLAN ID and WLAN BSS Interface.
|
|
The INDEX object ifIndex is the ifIndex of a WTP Virtual
|
|
Radio Interface."
|
|
INDEX { ifIndex, capwapDot11WlanProfileId }
|
|
::= { fsDot11WlanBindTable 1 }
|
|
|
|
FsDot11WlanBindEntry ::=
|
|
SEQUENCE { fsDot11WlanBindWlanId CapwapDot11WlanIdTC,
|
|
fsDot11WlanBindBssIfIndex InterfaceIndex,
|
|
fsDot11WlanBindRowStatus RowStatus
|
|
}
|
|
|
|
fsDot11WlanBindWlanId OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanIdTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the WLAN ID of a WLAN.
|
|
During a binding operation, the AC MUST select an unused
|
|
WLAN ID from between 1 and 16 [RFC5416]. For example, to bind
|
|
another WLAN profile to a radio that has been bound with
|
|
a WLAN profile, WLAN ID 2 should be assigned."
|
|
REFERENCE
|
|
"Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { fsDot11WlanBindEntry 1 }
|
|
|
|
fsDot11WlanBindBssIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index value that uniquely identifies a
|
|
WLAN BSS Interface. The interface identified by a
|
|
particular value of this index is the same interface as
|
|
identified by the same value of the ifIndex.
|
|
The ifIndex here is for a WLAN BSS Interface.
|
|
The creation of a row object in the capwapDot11WlanBindTable
|
|
triggers the AC to automatically create a WLAN BSS Interface
|
|
identified by an ifIndex without manual intervention.
|
|
The PHY address of the capwapDot11WlanBindBssIfIndex is the
|
|
BSSID. While manufacturers are free to assign BSSIDs by using
|
|
any arbitrary mechanism, it is advised that where possible the
|
|
BSSIDs are assigned as a contiguous block.
|
|
When assigned as a block, implementations can still assign
|
|
any of the available BSSIDs to any WLAN. One possible method
|
|
is for the WTP to assign the address using the following
|
|
algorithm: base BSSID address + WLAN ID."
|
|
REFERENCE
|
|
"Section 2.4 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { fsDot11WlanBindEntry 2 }
|
|
|
|
fsDot11WlanBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'"
|
|
::= { fsDot11WlanBindEntry 3 }
|
|
-- End of fsDot11WlanBindTable Table
|
|
|
|
-- fsWtpImageUpgrade Table
|
|
fsWtpImageUpgradeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsWtpImageUpgradeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that stores the WTP upgrade related information"
|
|
::= { fsWlanSystem 1 }
|
|
|
|
fsWtpImageUpgradeEntry OBJECT-TYPE
|
|
SYNTAX FsWtpImageUpgradeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that stores the upgrade related information for
|
|
a particular WTP model."
|
|
INDEX { capwapBaseWtpProfileWtpModelNumber }
|
|
::= { fsWtpImageUpgradeTable 1 }
|
|
|
|
FsWtpImageUpgradeEntry ::=
|
|
SEQUENCE {
|
|
fsWtpImageVersion OCTET STRING,
|
|
fsWtpUpgradeDev INTEGER,
|
|
fsWtpName SnmpAdminString,
|
|
fsWtpImageName OCTET STRING,
|
|
fsWtpAddressType InetAddressType,
|
|
fsWtpServerIP InetAddress,
|
|
fsWtpRowStatus RowStatus
|
|
}
|
|
|
|
fsWtpImageVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Software Image version number available in the
|
|
server"
|
|
::= { fsWtpImageUpgradeEntry 1 }
|
|
|
|
fsWtpUpgradeDev OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
perAP (2),
|
|
allAP (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether to upgrade a specific AP or all AP's or only
|
|
download the image"
|
|
DEFVAL { none }
|
|
::= { fsWtpImageUpgradeEntry 2 }
|
|
|
|
fsWtpName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured WTP name is applicable only if fsWtpUpgradeDev is set to
|
|
perAP."
|
|
::= { fsWtpImageUpgradeEntry 3 }
|
|
|
|
fsWtpImageName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Software Image name to be downloaded from the server."
|
|
::= { fsWtpImageUpgradeEntry 4 }
|
|
|
|
fsWtpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the Address type of server.Address type shall be ipv4(1) or
|
|
ipv6(2)."
|
|
DEFVAL { 1 }
|
|
::= { fsWtpImageUpgradeEntry 5 }
|
|
|
|
fsWtpServerIP OBJECT-TYPE
|
|
SYNTAX InetAddress(SIZE(4|16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ServerIP from which the image shall be downloaded."
|
|
::= { fsWtpImageUpgradeEntry 6 }
|
|
|
|
fsWtpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry"
|
|
::= { fsWtpImageUpgradeEntry 7 }
|
|
|
|
-- End of fsWtpImageUpgrade Table
|
|
|
|
-- fsDot11nConfigTable Table
|
|
|
|
fsDot11nConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11nConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the dot11n config params."
|
|
::= { fsDot11phy 4 }
|
|
|
|
fsDot11nConfigEntry OBJECT-TYPE
|
|
SYNTAX FsDot11nConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { ifIndex }
|
|
::= { fsDot11nConfigTable 1 }
|
|
|
|
FsDot11nConfigEntry ::=
|
|
SEQUENCE {
|
|
fsDot11nConfigShortGIfor20MHz TruthValue,
|
|
fsDot11nConfigShortGIfor40MHz TruthValue,
|
|
fsDot11nConfigChannelWidth INTEGER
|
|
}
|
|
|
|
fsDot11nConfigShortGIfor20MHz OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.It is written by the SME when a measurement
|
|
report is completed.The HT Short GI for 20 MHZ indicates short GI support
|
|
for the reception of 20 MHz packets, equal to false if not supported,
|
|
equal to true if supported See 8.4.2.58.2"
|
|
DEFVAL { false }
|
|
::= { fsDot11nConfigEntry 1 }
|
|
|
|
fsDot11nConfigShortGIfor40MHz OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable. It is written by the SME when a measurement
|
|
report is completed. The HT Short GI for 20 MHZ indicates short GI support
|
|
for the reception of 40 MHz packets, equal to false if not supported,
|
|
equal to true if supported See 8.4.2.58.2"
|
|
DEFVAL { false }
|
|
::= { fsDot11nConfigEntry 2 }
|
|
|
|
fsDot11nConfigChannelWidth OBJECT-TYPE
|
|
SYNTAX INTEGER { width20MHz(1), width40MHz(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable. It is written by the SME.Changes take effect
|
|
as soon as practical in the implementation. This is an 8-bit integer value
|
|
that identifies the Dot11n Config channel width. Currently defined values
|
|
and their corresponding Channel widths are: 10MHz = 01, 20MHz = 02"
|
|
DEFVAL { 1 }
|
|
::= { fsDot11nConfigEntry 3 }
|
|
|
|
-- End of fsDot11nConfigTable Table
|
|
|
|
-- fsDot11nMCSDataRateTable Table
|
|
|
|
fsDot11nMCSDataRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDot11nMCSDataRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table configures the Data rate for 11n params."
|
|
::= { fsDot11phy 5 }
|
|
|
|
fsDot11nMCSDataRateEntry OBJECT-TYPE
|
|
SYNTAX FsDot11nMCSDataRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" ."
|
|
INDEX { ifIndex,
|
|
fsDot11nMCSDataRateIndex }
|
|
::= { fsDot11nMCSDataRateTable 1 }
|
|
|
|
FsDot11nMCSDataRateEntry ::=
|
|
SEQUENCE {
|
|
fsDot11nMCSDataRateIndex Integer32,
|
|
fsDot11nMCSDataRate TruthValue
|
|
}
|
|
|
|
fsDot11nMCSDataRateIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table index."
|
|
::= { fsDot11nMCSDataRateEntry 1 }
|
|
|
|
fsDot11nMCSDataRate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether the rate is enabled or disabled."
|
|
DEFVAL { false }
|
|
::= { fsDot11nMCSDataRateEntry 2 }
|
|
|
|
-- End of fsDot11nMCSDataRateTable Table
|
|
|
|
END
|