601 lines
20 KiB
Plaintext
601 lines
20 KiB
Plaintext
-- This file was included in WWP MIB release 04-10-01-0027
|
|
--
|
|
-- WWP-LEOS-IP-INTERFACE-MIB.my
|
|
--
|
|
--
|
|
|
|
WWP-LEOS-IP-INTERFACE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Integer32, Unsigned32, Counter32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
RowStatus, DisplayString, MacAddress, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
wwpModulesLeos
|
|
FROM WWP-SMI;
|
|
|
|
|
|
wwpLeosIpInterfaceMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200805140000Z"
|
|
ORGANIZATION "Ciena, Inc"
|
|
CONTACT-INFO
|
|
" Mib Meister
|
|
115 North Sullivan Road
|
|
Spokane Valley, WA 99037
|
|
USA
|
|
Phone: +1 509 242 9000
|
|
Email: support@ciena.com"
|
|
DESCRIPTION
|
|
"Added the operational gateway and a trap for gateway changes"
|
|
REVISION "200805140000Z" -- 14nd May. 2008
|
|
DESCRIPTION
|
|
"The MIB module for the WWP IpInterface IP interfaces configuration. This MIB provide
|
|
additional configuration to whatever is provided by the standard ip group."
|
|
REVISION "200305020000Z" -- 2nd May. 2003
|
|
DESCRIPTION
|
|
"A new object for management packet priority is added."
|
|
REVISION "200104031700Z"
|
|
DESCRIPTION
|
|
"Initial creation."
|
|
::= { wwpModulesLeos 24 }
|
|
|
|
VlanId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 12-bit VLAN ID used in the VLAN Tag header."
|
|
SYNTAX INTEGER (1..4094)
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
wwpLeosIpInterfaceMIBObjects OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIB 1 }
|
|
|
|
|
|
--
|
|
-- IP Interface Node
|
|
--
|
|
wwpLeosIpInterface OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIBObjects 1 }
|
|
wwpLeosIpAclGlobal OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIBObjects 2 }
|
|
wwpLeosIpAclRules OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIBObjects 3 }
|
|
|
|
|
|
-- Notifications
|
|
|
|
wwpLeosIpInterfaceMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIB 2 }
|
|
wwpLeosIpInterfaceMIBNotifications OBJECT IDENTIFIER ::=
|
|
{ wwpLeosIpInterfaceMIBNotificationPrefix 0 }
|
|
|
|
-- Conformance information
|
|
|
|
wwpLeosIpInterfaceMIBConformance OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIB 3 }
|
|
wwpLeosIpInterfaceMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIBConformance 1 }
|
|
wwpLeosIpInterfaceMIBGroups OBJECT IDENTIFIER ::= { wwpLeosIpInterfaceMIBConformance 2 }
|
|
|
|
|
|
wwpLeosIpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosIpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of IP addresses and associated subnet mask."
|
|
::= { wwpLeosIpInterface 1 }
|
|
|
|
wwpLeosIpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosIpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface IP and subnet mask entry.
|
|
These interfaces are used to cause the switch CPU to
|
|
become involved with the IP traffic. By default, a
|
|
minimum of two interfaces must always exist, one for
|
|
the local management interface, one for the remote management
|
|
interface, and one or more for voice over IP."
|
|
INDEX { wwpLeosIpInterfaceIndex }
|
|
::= { wwpLeosIpInterfaceTable 1 }
|
|
|
|
WwpLeosIpInterfaceEntry ::= SEQUENCE {
|
|
wwpLeosIpInterfaceIndex Integer32,
|
|
wwpLeosIpInterfaceName DisplayString,
|
|
wwpLeosIpInterfaceIpAddr IpAddress,
|
|
wwpLeosIpInterfaceSubnet IpAddress,
|
|
wwpLeosIpInterfaceIfIndexXref INTEGER
|
|
}
|
|
|
|
wwpLeosIpInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index into the table."
|
|
::= { wwpLeosIpInterfaceEntry 1 }
|
|
|
|
wwpLeosIpInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The friendly name for the IP interface."
|
|
::= { wwpLeosIpInterfaceEntry 2 }
|
|
|
|
wwpLeosIpInterfaceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address associated with this interface. "
|
|
::= { wwpLeosIpInterfaceEntry 3 }
|
|
|
|
wwpLeosIpInterfaceSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask associated with this ip address/interface."
|
|
::= { wwpLeosIpInterfaceEntry 4 }
|
|
|
|
|
|
wwpLeosIpInterfaceIfIndexXref OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cross reference to MIB-2 Interfaces ifIndex."
|
|
::= { wwpLeosIpInterfaceEntry 5 }
|
|
|
|
wwpLeosIpExtInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosIpExtInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains Interface Specific
|
|
information maintained by each interface."
|
|
::= { wwpLeosIpInterface 2 }
|
|
|
|
wwpLeosIpExtInterfaceEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosIpExtInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interfaces additional configuration parameters
|
|
maintained by each interface."
|
|
AUGMENTS { wwpLeosIpInterfaceEntry }
|
|
::= { wwpLeosIpExtInterfaceTable 1 }
|
|
|
|
WwpLeosIpExtInterfaceEntry ::=
|
|
SEQUENCE {
|
|
wwpLeosIpInterfaceEnable TruthValue,
|
|
wwpLeosIpInterfaceVlanId VlanId,
|
|
wwpLeosIpInterfaceMgmtPktPriority INTEGER
|
|
}
|
|
|
|
wwpLeosIpInterfaceEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of each interface. A value of true(1) indicates
|
|
that this interface is enabled and a value of
|
|
false(2) indicates that this interface is disabled.
|
|
The device shouldn't allow the Management Station to disable
|
|
all the interfaces available on the box."
|
|
::= { wwpLeosIpExtInterfaceEntry 1 }
|
|
|
|
wwpLeosIpInterfaceVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlanId associated with this IP interface. The vlan indicated by
|
|
wwpLeosIpInterfaceVlanId should exist in the Vlan Table. If an interface
|
|
has no VLAN associated, then any read on this object should return
|
|
'noSuchInstance'."
|
|
::= { wwpLeosIpExtInterfaceEntry 2 }
|
|
|
|
wwpLeosIpInterfaceMgmtPktPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1p Priority value for the management traffic on this interface."
|
|
::= { wwpLeosIpExtInterfaceEntry 3 }
|
|
|
|
wwpLeosIpInterfaceAddrNotifEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
generates the wwpLeosIpInterfaceAddrChgNotification.
|
|
A false value prevents this notifications
|
|
from being generated by this system."
|
|
DEFVAL { true }
|
|
::= { wwpLeosIpInterface 3 }
|
|
|
|
wwpLeosIpInterfaceAddrChgNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
wwpLeosIpInterfaceName,
|
|
wwpLeosIpInterfaceIpAddr,
|
|
wwpLeosIpInterfaceSubnet
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosIpInterfaceAddrChgNotification is sent whenever the
|
|
ip address of an interface changes."
|
|
::= { wwpLeosIpInterfaceMIBNotifications 1 }
|
|
|
|
--
|
|
-- Data Interface MIB definitions
|
|
--
|
|
wwpLeosIpDataInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosIpDataInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data Interface IP and subnet mask entry.
|
|
To create a loopback interface in this table, following attributes must be specified.
|
|
wwpLeosIpDataInterfaceIndex
|
|
wwpLeosIpDataInterfaceName
|
|
wwpLeosIpDataInterfaceIpAddr
|
|
wwpLeosIpDataInterfaceType must be set to 'loopback'.
|
|
wwpLeosIpDataInterfaceVlanId defaults to 1 and cannot be set or changed.
|
|
No other MIB object should be set otherwise error will be returned.
|
|
|
|
To create a regular Data interface the following
|
|
attributes must be specified.
|
|
wwpLeosIpDataInterfaceIndex
|
|
wwpLeosIpDataInterfaceName
|
|
wwpLeosIpDataInterfaceIpAddr
|
|
wwpLeosIpDataInterfaceMask
|
|
wwpLeosIpDataInterfaceVlanId must be specified when
|
|
the interface is created. It cannot be changed after
|
|
creation.
|
|
wwpLeosIpDataRowStatus must be set to 'createAndGo'."
|
|
|
|
::= { wwpLeosIpInterface 4 }
|
|
|
|
wwpLeosIpDataInterfaceEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosIpDataInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents a Data interface
|
|
configuration parameter."
|
|
INDEX { wwpLeosIpDataInterfaceIndex }
|
|
::= { wwpLeosIpDataInterfaceTable 1 }
|
|
|
|
WwpLeosIpDataInterfaceEntry ::= SEQUENCE {
|
|
wwpLeosIpDataInterfaceIndex INTEGER,
|
|
wwpLeosIpDataInterfaceName DisplayString,
|
|
wwpLeosIpDataInterfaceIpAddr IpAddress,
|
|
wwpLeosIpDataInterfaceMask IpAddress,
|
|
wwpLeosIpDataInterfaceVlanId VlanId,
|
|
wwpLeosIpDataInterfaceType INTEGER,
|
|
wwpLeosIpDataInterfaceIfIndex Integer32,
|
|
wwpLeosIpDataInterfaceMac MacAddress,
|
|
wwpLeosIpDataInterfaceIfMtu Integer32,
|
|
wwpLeosIpDataInterfaceRowStatus RowStatus
|
|
}
|
|
wwpLeosIpDataInterfaceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index into the table."
|
|
::= { wwpLeosIpDataInterfaceEntry 1 }
|
|
|
|
wwpLeosIpDataInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name for this Data IP interface."
|
|
::= { wwpLeosIpDataInterfaceEntry 2 }
|
|
|
|
wwpLeosIpDataInterfaceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address associated with this interface. "
|
|
::= { wwpLeosIpDataInterfaceEntry 3 }
|
|
|
|
wwpLeosIpDataInterfaceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask associated with this ip address/interface."
|
|
::= { wwpLeosIpDataInterfaceEntry 4 }
|
|
|
|
wwpLeosIpDataInterfaceVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlanId associated with this Data IP interface. This vlan must already
|
|
exist on the device. The vlanId must be specified when the interface is
|
|
created. It cannot be set after creation. The vlanId cannot be specified
|
|
and defaults to 1 for a loopback interface."
|
|
::= { wwpLeosIpDataInterfaceEntry 5 }
|
|
|
|
wwpLeosIpDataInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast(1),
|
|
pointToPoint(2),
|
|
loopBack(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Data IP interface."
|
|
DEFVAL { broadcast }
|
|
::= { wwpLeosIpDataInterfaceEntry 6 }
|
|
|
|
wwpLeosIpDataInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique interface index assigned by INET."
|
|
::= { wwpLeosIpDataInterfaceEntry 7 }
|
|
|
|
wwpLeosIpDataInterfaceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address assigned by the device to this Data interface."
|
|
::= { wwpLeosIpDataInterfaceEntry 8 }
|
|
|
|
wwpLeosIpDataInterfaceIfMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the largest packet which can be
|
|
sent/received on the interface, specified in octets.
|
|
For interfaces that are used for transmitting network
|
|
datagrams, this is the size of the largest network
|
|
datagram that can be sent on the interface."
|
|
DEFVAL { 1500 }
|
|
::= { wwpLeosIpDataInterfaceEntry 9 }
|
|
|
|
wwpLeosIpDataInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to manage the creation and deletion of the
|
|
conceptual rows in this table.
|
|
To create a row in this table, a manager must
|
|
set this object to 'createAndGo'. To delete a row in this
|
|
table, a manager must set this object to 'destroy'.
|
|
If the entry exists, it will be displayed as 'active'."
|
|
::= { wwpLeosIpDataInterfaceEntry 10 }
|
|
--
|
|
-- Gateway
|
|
--
|
|
wwpLeosIpInterfaceOperationalGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational gateway IP address."
|
|
::= { wwpLeosIpInterface 5 }
|
|
|
|
|
|
wwpLeosIpInterfaceOperationalGatewayChgNotification NOTIFICATION-TYPE
|
|
OBJECTS { wwpLeosIpInterfaceOperationalGateway }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosIpOperationalGatewayChgNotification notification will be sent out whenever the operational gateway is changed."
|
|
::= { wwpLeosIpInterfaceMIBNotifications 2 }
|
|
|
|
--
|
|
-- IP ACL Items
|
|
--
|
|
|
|
wwpLeosIpAclState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows to globally configure IP ACL state."
|
|
::= { wwpLeosIpAclGlobal 1 }
|
|
|
|
wwpLeosIpAclCacheHit OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups satisfied by a cache hit."
|
|
::= { wwpLeosIpAclGlobal 2 }
|
|
|
|
wwpLeosIpAclNoHit OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups which failed because the source
|
|
ip address did not match a table entry."
|
|
::= { wwpLeosIpAclGlobal 3 }
|
|
|
|
wwpLeosIpAclBadPort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups which failed because the ingress
|
|
port was disallowed by a table entry."
|
|
::= { wwpLeosIpAclGlobal 4 }
|
|
|
|
wwpLeosIpAclClearStats OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this object to 'destroy' to clear the global and table
|
|
entry statistics counters."
|
|
::= { wwpLeosIpAclGlobal 5 }
|
|
|
|
wwpLeosIpAclBadDscp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups which failed because the ingress
|
|
DSCP value was disallowed by a table entry."
|
|
::= { wwpLeosIpAclGlobal 6 }
|
|
|
|
wwpLeosIpAclOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the IP ACL system."
|
|
::= { wwpLeosIpAclGlobal 7 }
|
|
|
|
wwpLeosIpAclInUseEntries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of IP ACL rules that are currently configured."
|
|
::= { wwpLeosIpAclGlobal 8 }
|
|
|
|
wwpLeosIpAclMaxEntries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the max number of IP ACL rules that can be configured."
|
|
::= { wwpLeosIpAclGlobal 9 }
|
|
|
|
--
|
|
-- IP ACL Table
|
|
--
|
|
wwpLeosIpAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosIpAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the display
|
|
parameters for the IP ACL table."
|
|
::= { wwpLeosIpAclRules 1 }
|
|
|
|
wwpLeosIpAclEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosIpAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the wwpLeosIpAclTable."
|
|
INDEX {wwpLeosIpAclEntryIpAddr, wwpLeosIpAclEntryIpMask}
|
|
::= { wwpLeosIpAclTable 1 }
|
|
|
|
WwpLeosIpAclEntry ::= SEQUENCE {
|
|
wwpLeosIpAclEntryIpAddr IpAddress,
|
|
wwpLeosIpAclEntryIpMask IpAddress,
|
|
wwpLeosIpAclEntryPortMask Unsigned32,
|
|
wwpLeosIpAclEntryHits Counter32,
|
|
wwpLeosIpAclEntryBadPort Counter32,
|
|
wwpLeosIpAclEntryStatus RowStatus,
|
|
wwpLeosIpAclEntryDscpMask OCTET STRING,
|
|
wwpLeosIpAclEntryBadDscp Counter32,
|
|
wwpLeosIpAclEntryPortBitMask OCTET STRING
|
|
}
|
|
|
|
wwpLeosIpAclEntryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the IP network which will be authorized."
|
|
::= { wwpLeosIpAclEntry 1 }
|
|
|
|
wwpLeosIpAclEntryIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the netmask for the IP network which will be authorized."
|
|
::= { wwpLeosIpAclEntry 2 }
|
|
|
|
wwpLeosIpAclEntryPortMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used to specify the physical ports which frames will
|
|
be allowed to ingress from. The mask is big endian and each bit,
|
|
numbered from 0 to 27, represents a physical port numbered from
|
|
1 to 28. A value of 0xFFFFFFFF may be used to specify all ports."
|
|
::= { wwpLeosIpAclEntry 3 }
|
|
|
|
wwpLeosIpAclEntryHits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups which matched the table entry."
|
|
::= { wwpLeosIpAclEntry 4 }
|
|
|
|
wwpLeosIpAclEntryBadPort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups which failed because the ingress
|
|
port was disallowed by the table entry."
|
|
::= { wwpLeosIpAclEntry 5 }
|
|
|
|
wwpLeosIpAclEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this object to 'CreateAndGo' to create a new table entry, set it
|
|
to 'destroy' to remove an existing entry."
|
|
::= { wwpLeosIpAclEntry 6 }
|
|
|
|
wwpLeosIpAclEntryDscpMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify the DSCP values for which IP packets
|
|
will be allowed to ingress. The mask is big endian and each bit,
|
|
numbered from 0 to 63, represents a DSCP value numbered from
|
|
0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all."
|
|
::= { wwpLeosIpAclEntry 7 }
|
|
|
|
wwpLeosIpAclEntryBadDscp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of lookups which failed because the ingress
|
|
DSCP value was disallowed by the table entry."
|
|
::= { wwpLeosIpAclEntry 8 }
|
|
|
|
wwpLeosIpAclEntryPortBitMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify the physical ports which frames will
|
|
be allowed to ingress from. The mask is big endian and each bit,
|
|
numbered from 0 to 63, represents a physical port numbered from
|
|
1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all ports."
|
|
::= { wwpLeosIpAclEntry 9 }
|
|
|
|
END
|
|
|