WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/utstarcom/UTCONFIGURE-MIB

17100 lines
530 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************************
-- Filename: epon-utConfigure.mib
-- Description: Contains iSwitch MIB Extension.
-- MIB Version: 1.00
--
-- Copyright (C) 2001 by UTStarcom, Inc. All rights reserved.
-- Reproduction of this document is authorized on the condition that
-- the foregoing copyright notice is included.
--
-- NOTE: The contents of this document are subject to change without notice
-- *****************************************************************************
-- *****************************************************************************
-- Version: $Id: $
-- Last Modified: $DateTime: $
-- Change List #: $Change: $
-- *****************************************************************************
UTCONFIGURE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI
Counter, TimeTicks FROM RFC1155-SMI
RowStatus, TruthValue,
TEXTUAL-CONVENTION FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB
ifIndex FROM IF-MIB
InterfaceIndexOrZero FROM IF-MIB
DisplayString FROM SNMPv2-TC
PhysAddress FROM SNMPv2-TC
MacAddress FROM BRIDGE-MIB
BridgeId FROM BRIDGE-MIB
Timeout FROM BRIDGE-MIB
uts-epon FROM UTS-EPON-MIB;
-- utsGeponBBS1000plus FROM UTS-BBS-COMMON-MIB;
utConfigure MODULE-IDENTITY
LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
ORGANIZATION "UTSTARcom Inc"
CONTACT-INFO
"Postal: UTSTARcom Inc
Alameda, California 9xxxx
Tel: +1 510 555 1212
E-Mail: mibs@utstar.com "
DESCRIPTION
"Contains UT EPON MIB Extensions."
::= { uts-epon 2 }
UtsSyslogServerityLevelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Syslog serverity types used by UT's BBS1000
SyslogServerTable."
SYNTAX INTEGER {
emergencies(1),
alerts(2),
critical(3),
errors(4),
warnings(5),
notifications(6),
informational(7),
debugging(8)
--,disabled(9)
}
UtsConfStationIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The station Id to identify the issued configuration command"
SYNTAX DisplayString(SIZE(0..16))
UtsConfStatusType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Confiuration/Test command result."
SYNTAX INTEGER
{
success(1),
failure(2),
busy(3)
}
--
-- epon objects extersion
--
utsSystemConfExt OBJECT IDENTIFIER ::= { utConfigure 1 }
utsEthIfConfExt OBJECT IDENTIFIER ::= { utConfigure 2 }
utsEfmPonConfExt OBJECT IDENTIFIER ::= { utConfigure 3 }
utsServiceConfExt OBJECT IDENTIFIER ::= { utConfigure 4 }
utsDiagnosisConfExt OBJECT IDENTIFIER ::= { utConfigure 5 }
--
-- epon system and module extension
--
utsSystemExtObjects OBJECT IDENTIFIER ::= { utsSystemConfExt 1 }
eponOamInitAlm OBJECT IDENTIFIER ::= { utsSystemConfExt 2 }
--
-- epon module table
--
--
-- epon board info
--
utsEponModuleBoardTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsEponModuleBoardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of board information in a EPON box."
::= { utsSystemExtObjects 1 }
utsEponModuleBoardEntry OBJECT-TYPE
SYNTAX UtsEponModuleBoardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains board information on a module."
INDEX { utsEponModuleBoardPhyId }
::= { utsEponModuleBoardTable 1 }
UtsEponModuleBoardEntry ::=
SEQUENCE {
utsEponModuleBoardPhyId
INTEGER,
utsEponModuleBoardType
INTEGER,
utsEponModuleBoardState
INTEGER,
utsEponModuleBoardSwVer
DisplayString,
utsEponModuleBoardBootromVer
DisplayString,
utsEponModuleBoardVer
DisplayString,
utsEponModuleBoardAction
INTEGER
}
utsEponModuleBoardPhyId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical module number"
::= { utsEponModuleBoardEntry 1 }
utsEponModuleBoardType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
gsm(2),
epm04a(3),
epm04b(4),
ltm(20),
ltm6(21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The line card type. In EPON, BCM, OLT are supported"
::= { utsEponModuleBoardEntry 2 }
utsEponModuleBoardState OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
init(2),
active(3),
offline(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal state of line card"
::= { utsEponModuleBoardEntry 3 }
utsEponModuleBoardSwVer OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software version of the board. The software verion is applicable
to the whole box and therefore belongs to the GSM board. For LTM
boards, the this object returns 'None'."
::= { utsEponModuleBoardEntry 7 }
utsEponModuleBoardBootromVer OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bootrom version of the board. The Bootrom verion is
applicable to the whole box and therefore belongs to the GSM board.
For LTM boards, the this object returns 'None'."
::= { utsEponModuleBoardEntry 9 }
utsEponModuleBoardVer OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Olt Firmware revision for the LTM board. Each of the
two LTM boards has a copy of the firmware running therefore both
will show a firmware version. For now, however, the two are always
the same. For GSM boards, the this object returns 'None'."
::= { utsEponModuleBoardEntry 10 }
utsEponModuleBoardAction OBJECT-TYPE
SYNTAX INTEGER
{
normal(0), -- read only for normal status
reset(1) -- write-only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset PON module."
::= { utsEponModuleBoardEntry 11}
--
-- PON system group
--
utsPonSystemGroup OBJECT IDENTIFIER ::= { utsSystemExtObjects 2 }
utsPonSysVlanIdBase OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon system vlan id base for sla."
::= { utsPonSystemGroup 1 }
utsPonSysLocalAuthentication OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon system local sla authentication."
::= { utsPonSystemGroup 2 }
utsPonSysLogicalPortStrictBinging OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon system local logical port strict binding."
::= { utsPonSystemGroup 3 }
utsPonSysSlaSynchronization OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon system local sla sync with radius server authentication."
::= { utsPonSystemGroup 4 }
utsPonSysOltMACAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..2400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon System OLT MAC address aging time, 0 means disable."
::= { utsPonSystemGroup 5 }
utsPonSysOnuAuthTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..6000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon System remote management onu authentication time out value, range <1..6000> - seconds, default: 15(sec)."
::= { utsPonSystemGroup 6 }
utsPonSysOlpMode OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pon System optical line protection mode."
::= { utsPonSystemGroup 7 }
utsPonSysDot1adTPID OBJECT-TYPE
SYNTAX INTEGER -- 0x8100 by default
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OLT PON TPID configuation"
::= { utsPonSystemGroup 8 }
utsPonSysReceiveSensitivityMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Receive Sensitivity(Max), the standard(default value) is -27dBm."
::= { utsPonSystemGroup 9 }
utsPonSysOverloadOpticalPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Over load optical power(Max), the standard(default value) is +4dBm."
::= { utsPonSystemGroup 10 }
--
-- Syslog configuration extension
--
utsSyslogExt OBJECT IDENTIFIER ::= { utsSystemExtObjects 3 }
utsSyslogGroup OBJECT IDENTIFIER ::= { utsSyslogExt 1 }
utsSyslogFormat OBJECT-TYPE
SYNTAX INTEGER
{
non-rfc3164(1),
rfc3164(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog format cisco-like or rfc3164."
::= { utsSyslogGroup 1 }
utsSyslogConsoleSeverity OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog console severity level."
::= { utsSyslogGroup 2 }
utsSyslogFlashSeverity OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog flash severity level."
::= { utsSyslogGroup 3 }
-- utsSyslogFlashModule OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- alarm(1),
-- event(2),
-- others(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Syslog flash module selection.
-- alarm(1) will select logging the alarm message to flash;
-- even(2) will select logging the even message to flash;
-- others(3)will select logging the other syslog message to flash;
-- "
-- ::= { utsSyslogGroup 4 }
------
------ syslog server table
------
utsSyslogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsSyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of syslog server information entries."
::= { utsSyslogExt 2 }
utsSyslogServerEntry OBJECT-TYPE
SYNTAX UtsSyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains syslog server information."
INDEX { utsSyslogServerId }
::= { utsSyslogServerTable 1 }
UtsSyslogServerEntry ::=
SEQUENCE {
utsSyslogServerId INTEGER,
utsSyslogServerIpAddress IpAddress,
utsSyslogServerPort INTEGER,
utsSyslogServerFacilityAuth UtsSyslogServerityLevelType,
utsSyslogServerFacilityDhcp UtsSyslogServerityLevelType,
utsSyslogServerFacilityEthernet UtsSyslogServerityLevelType,
utsSyslogServerFacilityPon UtsSyslogServerityLevelType,
utsSyslogServerFacilitySnmp UtsSyslogServerityLevelType,
utsSyslogServerFacilitySys UtsSyslogServerityLevelType,
utsSyslogServerFacilitySyslog UtsSyslogServerityLevelType,
utsSyslogServerFacilityUser UtsSyslogServerityLevelType
}
utsSyslogServerId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of syslog server's table."
::= { utsSyslogServerEntry 1 }
utsSyslogServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server host's ip address"
::= { utsSyslogServerEntry 2 }
utsSyslogServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server host's port number"
::= { utsSyslogServerEntry 3 }
utsSyslogServerFacilityAuth OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server auth facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 4 }
utsSyslogServerFacilityDhcp OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server dhcp facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 5 }
utsSyslogServerFacilityEthernet OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server ethernet facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 6 }
utsSyslogServerFacilityPon OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server pon facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 7 }
utsSyslogServerFacilitySnmp OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server snmp facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 8 }
utsSyslogServerFacilitySys OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server sys facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 9 }
utsSyslogServerFacilitySyslog OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server syslog facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 10 }
utsSyslogServerFacilityUser OBJECT-TYPE
SYNTAX UtsSyslogServerityLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog server user facility serverity level."
DEFVAL { informational }
::= { utsSyslogServerEntry 11 }
--
-- epon configuration management system group
--
utsManagementConfExt OBJECT IDENTIFIER ::= { utsSystemExtObjects 4 }
utsSystemConfGroup OBJECT IDENTIFIER ::= { utsManagementConfExt 1 }
utsFTPConfGroup OBJECT IDENTIFIER ::= { utsManagementConfExt 2 }
utsFileSystemGroup OBJECT IDENTIFIER ::= { utsManagementConfExt 3 }
utsChassisConfGroup OBJECT IDENTIFIER ::= { utsManagementConfExt 4 }
utsTFTPConfGroup OBJECT IDENTIFIER ::= { utsManagementConfExt 5 }
utsLedMgmtConfExt OBJECT IDENTIFIER ::= { utsManagementConfExt 6 }
utsSNMPConfExt OBJECT IDENTIFIER ::= { utsManagementConfExt 7 }
--
-- BBS1000+ SNMP management mib definition
--
utsSNMPConfObjects OBJECT IDENTIFIER ::= { utsSNMPConfExt 1 }
--
-- system community table
--
utsSysCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsSysCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The community table (4 entries). This table lists
community strings and the access levels."
::= { utsSNMPConfObjects 1 }
utsSysCommunityEntry OBJECT-TYPE
SYNTAX UtsSysCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"System community table entry."
INDEX { utsSysCommunityIndex }
::= { utsSysCommunityTable 1 }
UtsSysCommunityEntry ::=
SEQUENCE {
utsSysCommunityIndex
INTEGER,
-- utsSysCommunityEnable
-- INTEGER,
utsSysCommunityString
OCTET STRING,
utsSysCommunityAccess
INTEGER,
utsSysCommunityRowStatus
RowStatus
}
utsSysCommunityIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of community in the table.
"
::= { utsSysCommunityEntry 1 }
utsSysCommunityString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configurable community string with access rights
defined by the value of utsSysCommunityAccess.
"
::= { utsSysCommunityEntry 3 }
utsSysCommunityAccess OBJECT-TYPE
SYNTAX INTEGER
{
readOnly(1),
readWrite(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" A value of
readWrite(2) allows the community to read and write
all objects except restricted items such as
community strings, which cannot be accessed at all.
A value of readOnly(1) allows the community to read
all objects except restricted items.
"
::= { utsSysCommunityEntry 4 }
utsSysCommunityRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsSysCommunityEntry 5 }
--
-- BBS1000+ LED state display mib definition
--
utsLedGlobalLedDispGroup OBJECT IDENTIFIER ::= { utsLedMgmtConfExt 1 }
--
-- BBS1000+ chassis LED state display mib group
--
utsBBSLEDSysPowerLedState OBJECT-TYPE
SYNTAX INTEGER
{
turn-on(1), -- led on.
turn-off(2) -- led off.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: system power LED."
::= { utsLedGlobalLedDispGroup 1 }
utsBBSLEDSystemLedState OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1), -- system normal.
red-on(2) -- system exceptional state.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: SYS LED."
::= { utsLedGlobalLedDispGroup 2 }
utsBBSLEDFanLedState OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1), -- fan normal.
red-on(2) -- fan abnormal state.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: FAN LED."
::= { utsLedGlobalLedDispGroup 3 }
utsBBSLEDAlarmCriticalLedState OBJECT-TYPE
SYNTAX INTEGER
{
red-on(1),
red-off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: Critical alarm LED."
::= { utsLedGlobalLedDispGroup 4 }
utsBBSLEDAlarmMajorLedState OBJECT-TYPE
SYNTAX INTEGER
{
red-on(1),
red-off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: major alarm LED."
::= { utsLedGlobalLedDispGroup 5 }
utsBBSLEDAlarmMinorLedState OBJECT-TYPE
SYNTAX INTEGER
{
yellow-on(1),
yellow-off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: minor alarm LED."
::= { utsLedGlobalLedDispGroup 6 }
utsBBSLEDGsmUplinkSFP1State OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1), -- SFP Port 1 Link UP
green-off(2), -- SFP Port 1 Link DOWN
green-flashing(3) -- With data passing through
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: up link port SFP-1 link LED."
::= { utsLedGlobalLedDispGroup 7 }
utsBBSLEDGsmUplinkSFP2State OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
green-off(2),
green-flashing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: up link port SFP-2 link LED."
::= { utsLedGlobalLedDispGroup 8 }
utsBBSLEDGsmUplinkSFP3State OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
green-off(2),
green-flashing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: up link port SFP-3 link LED."
::= { utsLedGlobalLedDispGroup 9 }
utsBBSLEDGsmUplinkSFP4State OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
green-off(2),
green-flashing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs LED state display: up link port SFP-4 link LED."
::= { utsLedGlobalLedDispGroup 10 }
--
-- pon slot led state display table
--
utsLedPonSlotLedDispObjs OBJECT IDENTIFIER ::= { utsLedMgmtConfExt 2 }
utsLedPonSlotLedDispTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsLedPonSlotLedDispEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"bbs system PON slot LED state display table."
::= { utsLedPonSlotLedDispObjs 1 }
utsLedPonSlotLedDispEntry OBJECT-TYPE
SYNTAX UtsLedPonSlotLedDispEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing led state information of a pon slot."
INDEX { utsLedPonSlotLedDispSlotId }
::= { utsLedPonSlotLedDispTable 1 }
UtsLedPonSlotLedDispEntry ::=
SEQUENCE {
utsLedPonSlotLedDispSlotId
INTEGER,
utsLedPonSlotLedDispPowLedStat
INTEGER,
utsLedPonSlotLedDispFaultLedStat
INTEGER,
utsLedPonSlotLedDispSwapLedStat
INTEGER,
utsLedPonSlotLedDispPonPort1LedStat
INTEGER,
utsLedPonSlotLedDispPonPort2LedStat
INTEGER,
utsLedPonSlotLedDispPonPort3LedStat
INTEGER,
utsLedPonSlotLedDispPonPort4LedStat
INTEGER
}
utsLedPonSlotLedDispSlotId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the pon module slot id."
::= { utsLedPonSlotLedDispEntry 1 }
utsLedPonSlotLedDispPowLedStat OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
green-off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot power supply LED state."
::= { utsLedPonSlotLedDispEntry 2 }
utsLedPonSlotLedDispFaultLedStat OBJECT-TYPE
SYNTAX INTEGER
{
red-on(1),
red-off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot fault LED state."
::= { utsLedPonSlotLedDispEntry 3 }
utsLedPonSlotLedDispSwapLedStat OBJECT-TYPE
SYNTAX INTEGER
{
yellow-on(1), -- Modular Can Be Unplugged
yellow-off(2), -- Modular Can Not Unplugged
yellow-flashing(3) -- Module Is Waiting For Host to Confirm Unplug request
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot hot swap LED state."
::= { utsLedPonSlotLedDispEntry 4 }
utsLedPonSlotLedDispPonPort1LedStat OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
red-on(2),
led-off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot pon port 1 LED state."
::= { utsLedPonSlotLedDispEntry 5 }
utsLedPonSlotLedDispPonPort2LedStat OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
red-on(2),
led-off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot pon port 2 LED state."
::= { utsLedPonSlotLedDispEntry 6 }
utsLedPonSlotLedDispPonPort3LedStat OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
red-on(2),
led-off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot pon port 3 LED state."
::= { utsLedPonSlotLedDispEntry 7 }
utsLedPonSlotLedDispPonPort4LedStat OBJECT-TYPE
SYNTAX INTEGER
{
green-on(1),
red-on(2),
led-off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pon slot pon port 4 LED state."
::= { utsLedPonSlotLedDispEntry 8 }
--
-- BBS System boot Configuration
--
utsBBSSysOperState OBJECT-TYPE
SYNTAX INTEGER
{
other(1), -- read-only status.
running(2), -- read-only status.
reset(3) -- write to reset system
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system running/reset state."
::= { utsSystemConfGroup 1 }
utsBBSSysBootMethod OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
flash(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system boot method"
::= { utsSystemConfGroup 2 }
utsBBSSysBootFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system boot image file name with path"
::= { utsSystemConfGroup 3 }
utsBBSOutBandInterfaceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ip address of the bbs system out-of band management interface, user could
use SNMP or telnet protocol communicate with the system through this
ip address"
::= { utsSystemConfGroup 4 }
utsBBSOutbandInterfaceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ip mask of the bbs system out-of band management interface"
::= { utsSystemConfGroup 5 }
utsBBSOutbandInterfaceNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Next Hop ip address of the bbs system out-of band management interface"
::= { utsSystemConfGroup 6 }
utsBBSBootFTPUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..23))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ftp user name used to download the boot image."
::= { utsSystemConfGroup 7 }
utsBBSBootFTPPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ftp user name used to download the boot image."
::= { utsSystemConfGroup 8 }
utsBBSBootFTPServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ftp server IP address that bbs used to download the boot image from."
::= { utsSystemConfGroup 9 }
utsBBSSaveRunningConfigure OBJECT-TYPE
SYNTAX INTEGER
{
success(1), -- read-only, save configuration success.
failure(2), -- read-only, save confiiguration fail.
save(3) -- write-only, save the current configuration into flash.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write to this mib will save the current running configuration into flash."
::= { utsSystemConfGroup 10 }
-- Delelte the utsBBSMgmtTrafficInBandTTL and utsBBSMgmtTrafficOutBandTTL by Tomsong 20070821
utsBBSMgmtTrafficInBandTTL OBJECT-TYPE
SYNTAX INTEGER
(
1..255
)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL configuration for management traffic"
::= { utsSystemConfGroup 12 }
utsBBSMgmtTrafficOutBandTTL OBJECT-TYPE
SYNTAX INTEGER
(
1..255
)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL configuration for management traffic"
::= { utsSystemConfGroup 13 }
utsBBSMgmtSysRunningMode OBJECT-TYPE
SYNTAX INTEGER
{
-- isp-service-tag-handling-mode(1),
unique-tag-handling-mode(2),
-- application-tag-handling-mode(3),
-- qinq-tag-mode(4)
mixed-tag-mode(5) -- mixed for Application, ISP mode for per OLT PON port, QinQ mode for per ONU PON port;
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique tag handling mode: each ONU is assigned with an unique VLAN id, and internally
OLT is in a stacked but not nested mode. Traffic behind ONU
is always untagged.
mixed-tag-mode: the detailed tag mode is Per OLT PON port( Application or ISP mode) or ONU PON port ( QinQ-tag-mode).
"
::= { utsSystemConfGroup 14 }
utsBBSBPDUTermination OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable BPDU termination."
::= { utsSystemConfGroup 15 }
utsBBSSysSoftwareRateLimiting OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch of software rate limiting,
the default value is enable."
::= { utsSystemConfGroup 16 }
utsBBSSysHardwareRateLimiting OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch of hardware rate limiting,
the default value is enable."
::= { utsSystemConfGroup 17 }
utsBBSSysCpuUtilityAlarmThresholdTotal OBJECT-TYPE
SYNTAX INTEGER
( 0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total CPU utility threshold in percentage. If it is
above the threshold, a trap will be send to NMS. '0'
is to disable this function."
DEFVAL {90}
::= { utsSystemConfGroup 18 }
utsBBSSysCpuUtilityAlarmThresholdPerTask OBJECT-TYPE
SYNTAX INTEGER
( 0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Single task CPU utility threshold in percentage.
If it is above the threshold, a trap will be send to NMS. '0'
is to disable this function."
DEFVAL {50}
::= { utsSystemConfGroup 19 }
utsBBSSysMemoryUtilityAlarmThreshold OBJECT-TYPE
SYNTAX INTEGER
( 0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System memory utility threshold in 0.1 percentage.
If it is above the threshold, a trap will be send to NMS. '0'
is to disable this function."
DEFVAL {750 }
::= { utsSystemConfGroup 20 }
utsBBSSysARPAgingTime OBJECT-TYPE
SYNTAX INTEGER (30..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System ARP aging time."
::= { utsSystemConfGroup 21 }
utsBBSSysMACAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System switch MAC address aging time. The value range is 0, 10..65535.
0 is to disbale system switch MAC aging."
::= { utsSystemConfGroup 22 }
utsBBSSysFactoryDefault OBJECT-TYPE
SYNTAX INTEGER
{
normal(0), -- read only status
factoryDefault(1) -- write to reset configuation
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set configuation to factory default"
::= { utsSystemConfGroup 23 }
utsBBSOnuByteErrorWindow OBJECT-TYPE
SYNTAX INTEGER(1..20) -- seconds
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ONU traffic byte error detecting window size, 1 to 20 seconds."
::= { utsSystemConfGroup 24 }
utsBBSOnuByteErrorThresholdMin OBJECT-TYPE
SYNTAX INTEGER(1..300) -- bytes
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ONU traffic byte error threshold."
::= { utsSystemConfGroup 25 }
-- Add utsBBSMgmtTrafficTTL for management traffic by Tomsong 20070821
utsBBSMgmtTrafficTTL OBJECT-TYPE
SYNTAX INTEGER
(
1..255
)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL configuration for management traffic"
::= { utsSystemConfGroup 26 }
-- Add igmp parameter for the control mode and special mode only by Tomsong 20070906
utsBBSMgmtLastMembQueryIntvl OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages. This value may be tuned to
modify the leave latency of the network. A reduced value
results in reduced time to detect the loss of the last
member of a group. The value of this object is irrelevant
if igmpInterfaceVersion is 1. The value should be from 1 to 25,
the default value is 1"
DEFVAL { 1 }
::= { utsSystemConfGroup 28 }
utsBBSMgmtQueryInterval OBJECT-TYPE
SYNTAX INTEGER(10..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which IGMP Host-Query packets are
transmitted."
DEFVAL { 125 }
::= { utsSystemConfGroup 29 }
utsBBSMgmtQueryMaxRespTime OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised in IGMPv2
queries, the range should be from 1 to 25."
DEFVAL { 10 }
::= { utsSystemConfGroup 30 }
utsBBSMgmtRobustness OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses."
::= { utsSystemConfGroup 31 }
utsBBSMgmtMaxFrameSize OBJECT-TYPE
SYNTAX INTEGER (64..16368)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max frame size of system."
DEFVAL { 1532 }
::= { utsSystemConfGroup 32 }
utsBBSMgmtOption82FormatModeSetting OBJECT-TYPE
SYNTAX INTEGER
{
default(1), -- default setting
customized(2), -- customized by the user
ctc(3) -- special format for ctc
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set configuation to option82 to select the option82 mode."
::= { utsSystemConfGroup 33 }
utsBBSMgmtOption82DefaultCircuitID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default value of the Circuit ID"
::= { utsSystemConfGroup 34 }
utsBBSMgmtOption82CustomizedCircuitID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the Circuit ID format when enable Cutomized mode."
::= { utsSystemConfGroup 35 }
utsBBSMgmtOption82DefaultRemoteID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default value of the Remote ID"
::= { utsSystemConfGroup 36 }
utsBBSMgmtOption82CustomizedRemoteID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the Remote ID format when enable Cutomized mode."
::= { utsSystemConfGroup 37 }
utsBBSMgmtGratuitousArpLearning OBJECT-TYPE
SYNTAX INTEGER
{
enable(1), -- default setting
disable(2) -- customized by the user
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set configuation to the learning of gratuitous arp."
::= { utsSystemConfGroup 38 }
-- Add by tomsong for alarm sync
utsBBSMgmtAlarmSessionId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter increments by 1 each time the node resets."
::= { utsSystemConfGroup 39 }
utsBBSMgmtAlarmLastSeqNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains current alarm sequence number assigned by Fault Management Enhancement application."
::= { utsSystemConfGroup 40 }
utsBBSMgmtLoopbackDetection OBJECT-TYPE
SYNTAX INTEGER
{
disable(1), -- default value
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This setting to set the loopback detection in the system level, and the default value is disable."
::= { utsSystemConfGroup 41 }
utsBBSMgmtLoopbackDetectIntervalTime OBJECT-TYPE
SYNTAX INTEGER (60..7200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This setting to set the interval time of loopback detection, the default value is 60 second."
::= { utsSystemConfGroup 42 }
utsBBSMgmtOption82CtcAccessNodeIdentifier OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The access node identifier for ctc format."
::= { utsSystemConfGroup 43 }
utsBBSMgmtArpLearning OBJECT-TYPE
SYNTAX INTEGER
{
enable(1), -- default setting
disable(2) -- customized by the user
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set configuation to the learning of arp."
::= { utsSystemConfGroup 45 }
utsBBSMgmtOnuDisplayPolicy OBJECT-TYPE
SYNTAX INTEGER
{
onlineonly(1), -- default setting
all(2) -- all
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set configuation to the onu table."
::= { utsSystemConfGroup 49 }
utsBBSMgmtSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get configuation to software version."
::= { utsSystemConfGroup 50 }
utsBBSMgmtIgmpProxySourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of source ip address of IGMP proxy."
::= { utsSystemConfGroup 51 }
utsBBSMgmtOnuAutoConfigServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of servier ip address of auto config server for onu."
::= { utsSystemConfGroup 52 }
utsBBSMgmtOnuAutoConfigServerMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of servier ip mask of auto config server for onu."
::= { utsSystemConfGroup 53 }
utsBBSMgmtUplinkBandwidthThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of Uplink Bandwidth percent threshold, the unit is 1/1000."
::= { utsSystemConfGroup 54 }
utsBBSMgmtUniBandwidthThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of Onu uni Bandwidth percent threshold, the unit is 1/1000."
::= { utsSystemConfGroup 55 }
--
-- BBS System FTP Configuration
--
utsFTPConfAction OBJECT-TYPE
SYNTAX INTEGER
{
get(1), -- download file to the bbs system
put(2) -- upload file from the bbs system
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system ftp get(download) or put(upload) action. BBS only support binary file format"
::= { utsFTPConfGroup 1 }
utsFTPConfHostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system ftp host IP address"
::= { utsFTPConfGroup 2 }
utsFTPConfUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..23))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system ftp user name"
::= { utsFTPConfGroup 3 }
utsFTPConfPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system ftp password"
::= { utsFTPConfGroup 4 }
utsFTPConfLocalFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system ftp local file name with path"
::= { utsFTPConfGroup 5 }
utsFTPConfRemoteFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system ftp remote file name with path"
::= { utsFTPConfGroup 6 }
utsFTPConfStatus OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
failure(2),
busy(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FTP Upload/Download status"
::= { utsFTPConfGroup 7 }
utsFTPConfStationId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"station id, a string used to identify the issuer of FTP action."
::= { utsFTPConfGroup 8 }
--
-- BBS System TFTP Configuration
--
utsTFTPConfAction OBJECT-TYPE
SYNTAX INTEGER
{
get(1), -- download file to the bbs system
put(2) -- upload file from the bbs system
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system tftp get(download) or put(upload) action. BBS only support binary file format"
::= { utsTFTPConfGroup 1 }
utsTFTPConfHostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system tftp server host IP address"
::= { utsTFTPConfGroup 2 }
utsTFTPConfLocalFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system tftp local file name with path"
::= { utsTFTPConfGroup 5 }
utsTFTPConfRemoteFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bbs system tftp remote file name with path"
::= { utsTFTPConfGroup 6 }
utsTFTPConfStatus OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
failure(2),
busy(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TFTP Upload/Download status"
::= { utsTFTPConfGroup 7 }
utsTFTPConfStationId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"station id, a string used to identify the issuer of TFTP action."
::= { utsTFTPConfGroup 8 }
--
-- File System commands
--
utsFileSystemCommand OBJECT-TYPE
SYNTAX INTEGER
{
list(1),
copy(2),
rename(3),
delete(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Some file-system command can be performed on the bbs flash files.
list(1) will list all files in flash in a string with following format
'filename,filesize,filedate,filetime';'filename,filesize,filedate,filetime'
"
::= { utsFileSystemGroup 1 }
utsFileSystemListDirectory OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The legal directories should be flash:, nvm:syslog, nvm:cfgdata"
::= { utsFileSystemGroup 2 }
utsFileSystemListDirectoryResult OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the list(1) command
reported in utsFileSystemListDirectoryResult in the following format,
For normal file, like:
'filename1,filesize1,filedate1,filetime1';
'filename2,filesize2,filedate2,filetime2';
For directory file, add DIR indication for directory file, like:
'filename1, DIR, filesize1,filedate1,filetime1'
'filename2, DIR, filesize2,filedate2,filetime2'
A null string represents no files in the directory"
::= { utsFileSystemGroup 3 }
utsFileSystemSrcFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the command is rename, this file name is the original(old) file name.
If the command is copy, this file name is the source file name.
If the command is delete, this is the name of the file to be deleted"
::= { utsFileSystemGroup 4 }
utsFileSystemDstFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the command is rename, this file name is the new file name.
If the command is copy, this file name is the destination file name."
::= { utsFileSystemGroup 5 }
utsFileSystemCommandStatus OBJECT-TYPE
SYNTAX UtsConfStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the file-system command issued."
::= { utsFileSystemGroup 6 }
utsFileSystemCommandStationId OBJECT-TYPE
SYNTAX UtsConfStationIdType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Station id, a string used to identify the isuuer of the file-system command"
::= { utsFileSystemGroup 7 }
-- add by tomsong 2007/11/07
utsFileSystemListDirectoryResultEndFlag OBJECT-TYPE
SYNTAX INTEGER
{
end(1),
unremitting(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this flag is end(1),then should not read again, if this flag is unremitting(2),then should
read agagin until the flag change to end"
::= { utsFileSystemGroup 8 }
-- postphone to 3.0, zhaoxf Dec 30, 2005
-- utsFileSystemFlashFreeSize OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The free bytes of flash device"
-- ::= { utsFileSystemGroup 8 }
--
-- BBS Chassis System Configuration
--
utsBBSChassisPwrType OBJECT-TYPE
SYNTAX INTEGER
{
ac(1), -- read-only status.
dc(2) -- read-only status.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bbs power supply module type, AC or DC."
::= { utsChassisConfGroup 1 }
utsBBSChassisPwrLowSlot OBJECT-TYPE
SYNTAX INTEGER
{
empty(1),
installed-not-work(2),
installed-and-work(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"whether the chassis power module in low slot exist and work normally"
::= { utsChassisConfGroup 2 }
utsBBSChassisPwrHighSlot OBJECT-TYPE
SYNTAX INTEGER
{
empty(1),
installed-not-work(2),
installed-and-work(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"whether the chassis power module in high slot exist and work normally"
::= { utsChassisConfGroup 3 }
utsBBSChassisInternalPowerStat OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"chassis the system power module status, such as over voltage, low voltage, etc"
::= { utsChassisConfGroup 4 }
utsBBSChassisFanTrayStat OBJECT-TYPE
SYNTAX INTEGER
{
normal (1),
abnormal (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"whether the chassis Fan tray module exist"
::= { utsChassisConfGroup 5 }
utsBBSChassisTempCur OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"chassis CURRENT temperature "
::= { utsChassisConfGroup 6 }
utsBBSChassisTempUpLimit OBJECT-TYPE
SYNTAX INTEGER (0..75)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the threshold of chassis module temperature"
DEFVAL {55}
::= { utsChassisConfGroup 7 }
--
-- ethernet interface extersion
--
utsEthIfExtObjects OBJECT IDENTIFIER ::= { utsEthIfConfExt 1 }
--
-- ethernet interface table's extension
--
utsEthIfExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsEthIfExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of UTStarcom's extension to the interface entries. The
number of entries is given by the value of ifNumber. This table
contains additional objects for the interface table which is defined
in ref1213."
::= { utsEthIfExtObjects 1 }
utsEthIfExtEntry OBJECT-TYPE
SYNTAX UtsEthIfExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular interface."
INDEX { ifIndex }
::= { utsEthIfExtTable 1 }
UtsEthIfExtEntry ::=
SEQUENCE {
utsEthIfExtModuleId
INTEGER,
utsEthIfExtPortId
INTEGER,
utsEthIfExtLinkAggGroupId
INTEGER,
utsEthIfExtLoopbackPortId
INTEGER,
utsEthIfExtVlanId
INTEGER,
utsEthIfExtPortType
INTEGER,
utsEthIfExtIpAddress
IpAddress,
utsEthIfExtIpNetmask
IpAddress,
utsEthIfExtSwitchMode
INTEGER,
utsEthIfExtAdminStatus
INTEGER,
utsEthIfExtIfIndex
INTEGER,
utsEthIfExtDescription
DisplayString
}
utsEthIfExtModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the interface module id."
::= { utsEthIfExtEntry 1 }
utsEthIfExtPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the interface port Id."
::= { utsEthIfExtEntry 2 }
utsEthIfExtLinkAggGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Aggregation group number. This value has meaning when
the port type is a lag-port."
::= { utsEthIfExtEntry 3 }
utsEthIfExtLoopbackPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value that identifies the interface loopback port id. This value
has meaning when the port type is a loopback-port."
::= { utsEthIfExtEntry 4 }
utsEthIfExtVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface vlan id. This value is meaningful only
when the port type is vlan-port or supervlan-port."
::= { utsEthIfExtEntry 5 }
utsEthIfExtPortType OBJECT-TYPE
SYNTAX INTEGER {
port(1),
lag-port(2),
loopback-port(3),
vlan-port(4),
supervlan-port(5),
invalid-port(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that idicates the ethernet interface port type.
port - Physical port.
lag-port - Link Aggregation Port.
loopback-port - supports loopback.
vlan-port - VLAN port.
suppervlan-port - Supper VLAN port.
invalid-port - the port is in invalid state."
::= { utsEthIfExtEntry 6 }
utsEthIfExtIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip address of the particular interface. The IpAddress of the particular
interfce can be assigned by writting this object.
The utsEthIfExtIpAddress and utsEthIfExtIpNetmask must be set at same time"
::= { utsEthIfExtEntry 7 }
utsEthIfExtIpNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The network Mask of the subnet associated with this interface.
The utsEthIfExtIpAddress and utsEthIfExtIpNetmask must be set at same time"
::= { utsEthIfExtEntry 8 }
utsEthIfExtSwitchMode OBJECT-TYPE
SYNTAX INTEGER
{
layer-2(1),
layer-3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value to change the port mode to/from Layer-2/Layer-3 mode.
port in layer-3 mode has routing capability"
::= { utsEthIfExtEntry 9 }
utsEthIfExtAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use to turn up/down the interface in this entry."
::= { utsEthIfExtEntry 10 }
utsEthIfExtIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"extend interface table index."
::= { utsEthIfExtEntry 11 }
utsEthIfExtDescription OBJECT-TYPE --Add by tomsong for NMS MRD 4.8.5, 2007.5.9
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The description for the interface."
::= { utsEthIfExtEntry 12 }
--
-- switch port table extension
--
utsSwitchPortExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsSwitchPortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of UTStarcom's extension to the switch port entries. The
number of entries is given by the number of logical port. This table
contains additional objects for the switch port."
::= { utsEthIfExtObjects 8 }
utsSwitchPortExtEntry OBJECT-TYPE
SYNTAX UtsSwitchPortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular switch port."
INDEX { utsSwitchPortExtIfNum }
::= { utsSwitchPortExtTable 1 }
UtsSwitchPortExtEntry ::=
SEQUENCE {
utsSwitchPortExtIfNum INTEGER,
utsSwitchPortExtModuleId INTEGER,
utsSwitchPortExtPortId INTEGER,
utsSwitchPortExtLAGId INTEGER,
utsSwitchPortExtPortType INTEGER,
utsSwitchPortExtACLDefAction INTEGER,
utsSwitchPortExtAdmFlowControlRx INTEGER,
-- utsEthIfExtOprFlowControlRx
-- INTEGER,
utsSwitchPortExtAdmFlowControlTx INTEGER,
-- utsEthIfExtOprFlowControlTx
-- INTEGER,
utsSwitchPortExtIpMuticastFilter INTEGER
-- utsEthIfExtAction
-- INTEGER
}
utsSwitchPortExtIfNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregation.
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsSwitchPortExtEntry 1 }
utsSwitchPortExtModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module index to this switch port entry."
::= { utsSwitchPortExtEntry 2 }
utsSwitchPortExtPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index to this switch port entry."
::= { utsSwitchPortExtEntry 3 }
utsSwitchPortExtLAGId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAG index to this switch port entry."
::= { utsSwitchPortExtEntry 4 }
utsSwitchPortExtPortType OBJECT-TYPE
SYNTAX INTEGER
{
gePort(1),
lagPort(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface type: GE port or LAG port."
::= { utsSwitchPortExtEntry 5 }
utsSwitchPortExtACLDefAction OBJECT-TYPE
SYNTAX INTEGER
{
preConfiguration(1),
noPreConfiguration(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL default action of this port."
::= { utsSwitchPortExtEntry 6 }
utsSwitchPortExtAdmFlowControlRx OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
-- desire(3),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the receive flow control administrative
status on the port."
::= { utsSwitchPortExtEntry 7 }
-- utsSwitchPortExtOprFlowControlRx OBJECT-TYPE
-- SYNTAX INTEGER
--{
-- enabled(1),
--disabled(2),
--disagree(3),
--notAvailable(4) for non-physical port,
-- vlan interface, loopback interface, etc
--}
--MAX-ACCESS read-only
--STATUS current
--DESCRIPTION
-- "Indicates the receive flow control operational
-- status of the port. If the port could not reach an agreement
-- on the link protocol with the far end, its operational
--status will be disagree(3)"
--::= { utsEthIfExtEntry 8 }
utsSwitchPortExtAdmFlowControlTx OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
-- desire(3),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the send flow control administrative
status on the port."
DEFVAL {1}
::= { utsSwitchPortExtEntry 9 }
--utsSwitchPortExtOprFlowControlTx OBJECT-TYPE
-- SYNTAX INTEGER
--{
-- enabled(1),
--disabled(2),
--disagreed(3),
--notAvailable(4) for non-physical port,
-- vlan interface, loopback interface, etc
-- }
--MAX-ACCESS read-only
--STATUS current
--DESCRIPTION
-- "Indicates the send flow control operational
-- status of the port. If the port could not reach an agreement
-- on the link protocol with the far end, its operational
--status will be disagree(3)"
-- ::= { utsEthIfExtEntry 10 }
utsSwitchPortExtIpMuticastFilter OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the ip multicast filter for the port."
::= { utsSwitchPortExtEntry 11 }
-- the utsEthIntelligentLinkTable table
-- implemented by Core Switch chip
-- Vlan
utsEthIntelligentLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsEthIntelligentLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Intelligent Link Table for uplink side."
::= { utsEthIfExtObjects 15 }
utsEthIntelligentLinkEntry OBJECT-TYPE
SYNTAX UtsEthIntelligentLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the intelligent link table for Eth interface."
INDEX { utsEthIntelligentLinkGroupId }
::= { utsEthIntelligentLinkTable 1 }
UtsEthIntelligentLinkEntry ::=
SEQUENCE {
utsEthIntelligentLinkGroupId INTEGER,
utsEthIntelligentLinkGroupName DisplayString,
utsEthIntelligentLinkMasterPortType INTEGER,
utsEthIntelligentLinkMasterPortModuleId INTEGER,
utsEthIntelligentLinkMasterPortDeviceId INTEGER,
utsEthIntelligentLinkMasterPortPortId INTEGER,
utsEthIntelligentLinkMasterLinkAggGroupId INTEGER,
utsEthIntelligentLinkSlavePortType INTEGER,
utsEthIntelligentLinkSlavePortModuleId INTEGER,
utsEthIntelligentLinkSlavePortDeviceId INTEGER,
utsEthIntelligentLinkSlavePortPortId INTEGER,
utsEthIntelligentLinkSlaveLinkAggGroupId INTEGER,
utsEthIntelligentLinkMasterPortStatus INTEGER,
utsEthIntelligentLinkSlavePortStatus INTEGER,
utsEthIntelligentLinkRowStatus RowStatus
}
utsEthIntelligentLinkGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of intelligent link group id."
::= { utsEthIntelligentLinkEntry 1 }
utsEthIntelligentLinkGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An name of intelligent link group."
::= { utsEthIntelligentLinkEntry 2 }
utsEthIntelligentLinkMasterPortType OBJECT-TYPE
SYNTAX INTEGER
{
ethernetport(1),
linkaggroup(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate the master port is common ehternet port or link agg group."
::= { utsEthIntelligentLinkEntry 3 }
utsEthIntelligentLinkMasterPortModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Master Port Module ID."
::= { utsEthIntelligentLinkEntry 4 }
utsEthIntelligentLinkMasterPortDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Master Port Device ID."
::= { utsEthIntelligentLinkEntry 5 }
utsEthIntelligentLinkMasterPortPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Master Port ID."
::= { utsEthIntelligentLinkEntry 6 }
utsEthIntelligentLinkMasterLinkAggGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Master Link Agg Group Id."
::= { utsEthIntelligentLinkEntry 7 }
utsEthIntelligentLinkSlavePortType OBJECT-TYPE
SYNTAX INTEGER
{
ethernetport(1),
linkaggroup(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate the slave port is common ehternet port or link agg group."
::= { utsEthIntelligentLinkEntry 8 }
utsEthIntelligentLinkSlavePortModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Slave Port Module ID."
::= { utsEthIntelligentLinkEntry 9 }
utsEthIntelligentLinkSlavePortDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Slave Port Device ID."
::= { utsEthIntelligentLinkEntry 10 }
utsEthIntelligentLinkSlavePortPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Slave Port ID."
::= { utsEthIntelligentLinkEntry 11 }
utsEthIntelligentLinkSlaveLinkAggGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Slave Link Agg Group Id."
::= { utsEthIntelligentLinkEntry 12 }
utsEthIntelligentLinkMasterPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
notready(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Master port status."
::= { utsEthIntelligentLinkEntry 13 }
utsEthIntelligentLinkSlavePortStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
notready(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slave port status."
::= { utsEthIntelligentLinkEntry 14 }
utsEthIntelligentLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsEthIntelligentLinkEntry 15 }
--
-- ip interface secondary IP addres table
--
utsIfSecondIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIfSecondIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"this table contains all secondary ip address configured for a ip interface."
::= { utsEthIfExtObjects 7 }
utsIfSecondIpEntry OBJECT-TYPE
SYNTAX UtsIfSecondIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing secondary ip address informaiton
applicable to a particular interface."
INDEX { utsIfSecondIpIfIndex, utsIfSecondIpAddress, utsIfSecondIpNetmask }
::= { utsIfSecondIpTable 1 }
UtsIfSecondIpEntry ::=
SEQUENCE {
utsIfSecondIpIfIndex
InterfaceIndex,
utsIfSecondIpAddress
IpAddress,
utsIfSecondIpNetmask
IpAddress,
utsIfSecondIpStatus
RowStatus
}
utsIfSecondIpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface for which this entry contains information for
an secondary IP address."
::= { utsIfSecondIpEntry 1 }
utsIfSecondIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"secondary Ip address of the particular interface. The IpAddress of the particular
interfce can be assigned by writting this object.
The utsIfSecondIpAddress and utsIfSecondIpNetmask must be set at same time"
::= { utsIfSecondIpEntry 7 }
utsIfSecondIpNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The network Mask of the subnet associated with this interface.
The utsIfSecondIpAddress and utsIfSecondIpNetmask must be set at same time"
::= { utsIfSecondIpEntry 8 }
utsIfSecondIpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsIfSecondIpEntry 9 }
--
-- link aggregation Extension
--
-- the lagUtExtDot3adAgg table
-- Implementation of the lagUtExtDot3adAgg group is optional. It is
-- implemented by those lag that support the IEEE 802.3 link aggregations
-- Protocol.
utsLagExtDot3adAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsLagExtDot3adAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"lagMIB UtExt DotsadAgg Table."
::= { utsEthIfExtObjects 2 }
utsLagExtDot3adAggEntry OBJECT-TYPE
SYNTAX UtsLagExtDot3adAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the lagMIB extension table for link aggregation interface."
INDEX { utsLagExtDot3adAggGroupId }
::= { utsLagExtDot3adAggTable 1 }
UtsLagExtDot3adAggEntry ::=
SEQUENCE {
utsLagExtDot3adAggGroupId INTEGER,
utsLagExtDot3adAggName DisplayString,
utsLagExtDot3adAggPerLinkSpeed INTEGER,
utsLagExtDot3adAggPortListPorts OCTET STRING,
utsLagExtDot3adAggRtag INTEGER,
utsLagExtDot3adAggStatus RowStatus
}
utsLagExtDot3adAggGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of what link aggregation group index of the 802.3 lag is
running."
::= { utsLagExtDot3adAggEntry 1 }
utsLagExtDot3adAggName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the name of the link aggregation group."
::= { utsLagExtDot3adAggEntry 2 }
utsLagExtDot3adAggPerLinkSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the speed of the link aggregation group."
::= { utsLagExtDot3adAggEntry 3 }
utsLagExtDot3adAggPortListPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the second octet specifying
ports 9 through 16, etc. Within each octet, the least significant bit
represents the lowest numbered port, and the most significant bit
represents the highest numbered port. Thus, each port of the bridge
is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
::= { utsLagExtDot3adAggEntry 4 }
utsLagExtDot3adAggRtag OBJECT-TYPE
SYNTAX INTEGER {
srcMac(1),
destMac(2),
srcMacNDestMac(3),
srcIp(4),
destIp(5),
srcIpNDestIp(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the load balancing rules number for the link aggregation group. "
::= { utsLagExtDot3adAggEntry 6 }
utsLagExtDot3adAggStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsLagExtDot3adAggEntry 9 }
--
-- To display mac address for the link aggregation ports
--
utsLagExtLinkAggMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsLagExtLinkAggMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"lagMIB UtExt LinkAggMac Table."
::= { utsEthIfExtObjects 3 }
utsLagExtLinkAggMacEntry OBJECT-TYPE
SYNTAX UtsLagExtLinkAggMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the lagMIB extension table."
INDEX
{
utsLagExtLinkAggMacAddress,utsLagExtLinkAggMacVlanId
}
::= { utsLagExtLinkAggMacTable 1 }
UtsLagExtLinkAggMacEntry ::=
SEQUENCE {
utsLagExtLinkAggMacInterface DisplayString,
utsLagExtLinkAggMacModule INTEGER,
utsLagExtLinkAggMacPort INTEGER,
utsLagExtLinkAggMacVlanId INTEGER,
utsLagExtLinkAggMacIsStatic INTEGER,
utsLagExtLinkAggMacIntfType INTEGER,
utsLagExtLinkAggMacTrunkId INTEGER,
utsLagExtLinkAggMacAddress MacAddress,
utsLagExtLinkAggStatus RowStatus
}
utsLagExtLinkAggMacInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interface name string when showing mac address table."
::= { utsLagExtLinkAggMacEntry 1 }
utsLagExtLinkAggMacModule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Module number of the learned mac address entry."
::= { utsLagExtLinkAggMacEntry 2 }
utsLagExtLinkAggMacPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number from which this mac address was learned. Only
when utsLagExtLinkAggMacBelongToTrunk is false."
::= { utsLagExtLinkAggMacEntry 3 }
utsLagExtLinkAggMacVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan id of the learned mac address entry."
::= { utsLagExtLinkAggMacEntry 4 }
utsLagExtLinkAggMacIsStatic OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to show where the mac address is static."
::= { utsLagExtLinkAggMacEntry 5 }
utsLagExtLinkAggMacIntfType OBJECT-TYPE
SYNTAX INTEGER {
belongtotrunk(1),
normal-port(2),
cpu(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag indicating whether this mac address belongs to a trunk or other.
if it is belongtotrunk, the utsLagExtLinkAggMacTrunkId will be relevant
and the utsLagExtLinkAggMacPort should be ignored. if the value
of this flag is normal-port, this mac address belongs to an individual
port, not to a trunk. The object utsLagExtLinkAggMacPort then
contains the valid port number from which this address was learned
from. The trunkId in this case should be ignored. if the value is cpu(3),
utsLagExtLinkAggMacTrunkId and utsLagExtLinkAggMacPort is not used, and it is not configurable."
::= { utsLagExtLinkAggMacEntry 6 }
utsLagExtLinkAggMacTrunkId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Trunk id of the learned mac address. Only valid when
utsLagExtLinkAggMacBelongToTrunk is true."
::= { utsLagExtLinkAggMacEntry 7 }
utsLagExtLinkAggMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The physical address of the learned mac address entry."
::= { utsLagExtLinkAggMacEntry 8 }
utsLagExtLinkAggStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsLagExtLinkAggMacEntry 9 }
-- the utsLagExtDot1qVlan table
-- implemented by those lag that support the IEEE 802.1q
-- Vlan
utsLagExtDot1qVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsLagExtDot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"lagMIB UtExt Dot1q Vlan Table."
::= { utsEthIfExtObjects 4 }
utsLagExtDot1qVlanEntry OBJECT-TYPE
SYNTAX UtsLagExtDot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the lagMIB extension table for vlan."
INDEX { utsLagExtDot1qVlanIndex }
::= { utsLagExtDot1qVlanTable 1 }
UtsLagExtDot1qVlanEntry ::=
SEQUENCE {
utsLagExtDot1qVlanIndex INTEGER,
utsLagExtDot1qVlanName DisplayString,
utsLagExtDot1qVlanPortListPorts OCTET STRING,
utsLagExtDot1qVlanTaggedPortListPorts OCTET STRING,
utsLagExtDot1qVlanPortVidListPorts OCTET STRING,
utsLagExtDot1qVlanStatus RowStatus,
utsLagExtDot1qVlanUnTaggedPortListPorts OCTET STRING,
utsLagExtDot1qVlanIgmpSnoop INTEGER,
utsEponDot1qVlanStpBridgeEnable INTEGER,
utsLagExtDot1qVlanPPPoEPlus INTEGER,
utsLagExtDot1qVlanL2DHCPOption82 INTEGER,
utsLagExtDot1qVlanArpProxySwitch INTEGER
}
utsLagExtDot1qVlanIndex OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of what vlan index of the 802.1q is running."
::= { utsLagExtDot1qVlanEntry 1 }
utsLagExtDot1qVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the name of the vlan group."
::= { utsLagExtDot1qVlanEntry 2 }
utsLagExtDot1qVlanPortListPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the second octet specifying
ports 9 through 16, etc. Within each octet, the most significant bit
represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the bridge
is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
::= { utsLagExtDot1qVlanEntry 3 }
utsLagExtDot1qVlanTaggedPortListPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the second octet specifying
ports 9 through 16, etc. Within each octet, the most significant bit
represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the bridge
is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
::= { utsLagExtDot1qVlanEntry 4 }
utsLagExtDot1qVlanPortVidListPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the member of the current vlan whose port based
vlan id is also vlan id, it must be subnet of port lists."
::= { utsLagExtDot1qVlanEntry 5 }
utsLagExtDot1qVlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsLagExtDot1qVlanEntry 6 }
utsLagExtDot1qVlanUnTaggedPortListPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the second octet specifying
ports 9 through 16, etc. Within each octet, the most significant bit
represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the bridge
is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
::= { utsLagExtDot1qVlanEntry 7 }
utsLagExtDot1qVlanIgmpSnoop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"indicate whether or not igmp snooping is running for this vlan id."
::= { utsLagExtDot1qVlanEntry 8 }
utsEponDot1qVlanStpBridgeEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the stp protocol for configured VLAN ID,
disable will remove a entry in stp table, enable will add a entry in stp table"
::= { utsLagExtDot1qVlanEntry 9 }
utsLagExtDot1qVlanPPPoEPlus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"indicate whether or not PPPoE plus is running for this vlan id."
::= { utsLagExtDot1qVlanEntry 10 }
utsLagExtDot1qVlanL2DHCPOption82 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"indicate whether or not L2 mode DHCP option82 is running for this vlan id."
::= { utsLagExtDot1qVlanEntry 11 }
utsLagExtDot1qVlanArpProxySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"indicate whether or not arp proxy in this sub vlan, if want to enalbe the precondition is the vlan
is sub-vlan and the according the svi of super vlan is valid."
::= { utsLagExtDot1qVlanEntry 12 }
--
-- Layer 2 conf ext
--
utsLayer2ConfExt OBJECT IDENTIFIER ::= { utsEthIfExtObjects 5 }
utsLay2MulticastExt OBJECT IDENTIFIER ::= { utsLayer2ConfExt 1 }
utsEponMulticastCtrlGroup OBJECT IDENTIFIER ::= { utsLay2MulticastExt 1 }
-- utsIgmpSnoopingQueryInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Igmp snooping interval b/w general queries(in secs)."
-- ::= { utsIgmpSnoopingGroup 1 }
-- utsIgmpSnoopingAnxiousTimer OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Igmp snooping anxious period timer(in seconds)."
-- ::= { utsIgmpSnoopingGroup 2 }
-- utsIgmpSnoopingV1HostTimer OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Igmp snooping version 1 host timer(in seconds)."
-- ::= { utsIgmpSnoopingGroup 3 }
-- utsIgmpSnoopingRobustness OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Igmp snooping robustness variable."
-- ::= { utsIgmpSnoopingGroup 4 }
-- utsIgmpSnoopingReportSuppression OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Igmp snooping report suppression is enabled or not."
-- ::= { utsIgmpSnoopingGroup 5 }
utsEponMulticastCtrlIpmcEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"global Igmp snooping ipmc is enabled or not."
::= { utsEponMulticastCtrlGroup 6 }
utsEponMulticastCtrlIgmpSnoopingStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"global Igmp snooping is enabled or not."
::= { utsEponMulticastCtrlGroup 7 }
utsEponMcastCtrlIgmpProxyStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Igmp proxy is enabled or not."
::= { utsEponMulticastCtrlGroup 8 }
utsEponMulticastCtrlSuperVidList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the vlan id for which the multicast function is enabled.
Each octet within this value specifies a set of eight vlan, with the
first octet specifying ports 1 through 8, the second octet specifying
ports 9 through 16, etc. Within each octet, the most significant bit
represents the lowest numbered vlan, and the least significant bit
represents the highest numbered vlan. Thus, each port of the bridge
is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of vlans;
the vlan is not included if its bit has a value of '0'."
::= { utsEponMulticastCtrlGroup 9 }
--
-- monitor session
--
utsMonitorSessionGroup OBJECT IDENTIFIER ::= { utsLayer2ConfExt 2 }
utsMonitorSessionModule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Monitor session control module number."
::= { utsMonitorSessionGroup 1 }
utsMonitorSessionPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Monitor session control port umber."
::= { utsMonitorSessionGroup 2 }
utsMonitorSessionIngressPortBitLists OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Monitor session control ingress port bit lists ."
::= { utsMonitorSessionGroup 3 }
utsMonitorSessionEngressPortBitLists OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Monitor session control ingress port bit lists ."
::= { utsMonitorSessionGroup 4 }
--
-- gigaethernet interface rate control (port mirroring)
-- rename UtsIntfRateControlEntry ?
utsIntfRateControlObjects OBJECT IDENTIFIER ::= { utsLayer2ConfExt 3 }
utsIntfRateControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIntfRateControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for interface rate control MIB objects."
::= { utsIntfRateControlObjects 1 }
utsIntfRateControlEntry OBJECT-TYPE
SYNTAX UtsIntfRateControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interface rate control MIB table."
INDEX {utsIntfRateControlModuleId, utsIntfRateControlPortId }
::= { utsIntfRateControlTable 1 }
UtsIntfRateControlEntry ::=
SEQUENCE {
utsIntfRateControlModuleId INTEGER,
utsIntfRateControlPortId INTEGER,
utsIntfRateControlMcastEnable INTEGER,
utsIntfRateControlMcastLimit INTEGER,
utsIntfRateControlBcastEnable INTEGER,
utsIntfRateControlBcastLimit INTEGER,
utsIntfRateControlUnicastEnable INTEGER,
utsIntfRateControlUnicastLimit INTEGER,
utsIntfRateLimitIngressBandwidth INTEGER,
utsIntfRateLimitEgressBandwidth INTEGER,
utsIntfRateControlMaxFrameSize INTEGER,
utsIntfRateControlIsolationCtrl INTEGER,
utsIntfRateControlUplinkSpeed INTEGER,
utsIntfRateControlVlanIngressFilter INTEGER,
utsIntfRateControlUplinkTranceiverType INTEGER,
utsIntfRateControlAutoNegotiation INTEGER,
utsIntfRateLimitIngressBurstSize INTEGER,
utsIntfRateLimitEgressBurstSize INTEGER,
utsIntfRateControlUplinkDuplexStatus INTEGER,
utsIntfRateControlUplinkPortMode INTEGER
}
utsIntfRateControlModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies the interface rate control module index"
::= { utsIntfRateControlEntry 1 }
utsIntfRateControlPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies the interface rate control port index"
::= { utsIntfRateControlEntry 2 }
utsIntfRateControlMcastEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the interface rate control multi-cast enbaled or disabled flag."
::= { utsIntfRateControlEntry 3 }
utsIntfRateControlMcastLimit OBJECT-TYPE
SYNTAX INTEGER (0..33550000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the interface rate control multi-cast rate limit, unit is pps."
::= { utsIntfRateControlEntry 4 }
utsIntfRateControlBcastEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the interface rate control broadcast enbaled or disabled flag."
::= { utsIntfRateControlEntry 5 }
utsIntfRateControlBcastLimit OBJECT-TYPE
SYNTAX INTEGER (0..33550000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the interface rate control broadcast rate limit, unit is pps."
::= { utsIntfRateControlEntry 6 }
utsIntfRateControlUnicastEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the interface rate control uni-cast enbaled or disabled flag."
::= { utsIntfRateControlEntry 7 }
utsIntfRateControlUnicastLimit OBJECT-TYPE
SYNTAX INTEGER (0..33550000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the interface rate control uni-cast rate limit, unit is pps."
::= { utsIntfRateControlEntry 8 }
utsIntfRateLimitIngressBandwidth OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the switch giga Ethernet interface ingress rate control.
From 1 to 1000M with a granularity of 1M. this attribute will be affected by the
value of utsIntRateControlUplinkSpeed. the default value is the max physical speed
of this port."
::= { utsIntfRateControlEntry 9 }
utsIntfRateLimitEgressBandwidth OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value that identifies the switch giga Ethernet interface egress rate control.
From 1 to 1000M with a granularity of 1M. this attribute will be affected by
the value of utsIntRateControlUplinkSpeed. the default value is the max physical
speed of this port."
::= { utsIntfRateControlEntry 10 }
utsIntfRateControlMaxFrameSize OBJECT-TYPE
SYNTAX INTEGER (64..16383)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BBS1000/1000+: Max accepted frame size setting for each GE port, all the frame size greater than it
will be dropped. (Max-frame 64-16383). the default value 1536.
BBS4000: not applicable.
"
::= { utsIntfRateControlEntry 11 }
utsIntfRateControlIsolationCtrl OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User traffic isolation control. Control for enable or disable the traffic talking between different OLTs. For downlink port only."
DEFVAL {disable}
::= { utsIntfRateControlEntry 12 }
-- zhaoxf Dec 26 2005
utsIntfRateControlUplinkSpeed OBJECT-TYPE
SYNTAX INTEGER
{
ten-mega(10),
hundred-mega(100),
giga-mega(1000)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"configure bbs1000 uplink port maximum physical speed, only apply to uplink port. "
DEFVAL {giga-mega}
::= { utsIntfRateControlEntry 13 }
utsIntfRateControlVlanIngressFilter OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable gigaEthernet port vlan ingress filtering. When enables Ingress Filtering for this port.
then the ingress port discards any frame received on that port whose VLAN classification does
not include that port in its member set. The default value is 0, that is, disable Ingress
Filtering on that port."
DEFVAL{enable}
::= { utsIntfRateControlEntry 14 }
utsIntfRateControlUplinkTranceiverType OBJECT-TYPE
SYNTAX INTEGER
{
optical(1),
copper(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tranceiver type.
Note: BBS4000 GEM04A only support copper;
"
-- DEFVAL()
::= { utsIntfRateControlEntry 15 }
utsIntfRateControlAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the phyical port auto negotiation. For uplink port only."
DEFVAL{ enable }
::= { utsIntfRateControlEntry 16 }
utsIntfRateLimitIngressBurstSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The burst size of ingress.
For BBS1000/1000+ The validate value range is 4|8|16|32|64|128|256|512;
For BBS4000 The validate value range is 0~13, (0: disable, others: 32Kbits * 2^(x-1)."
-- DEFVAL()
::= { utsIntfRateControlEntry 17 }
utsIntfRateLimitEgressBurstSize OBJECT-TYPE
SYNTAX INTEGER (4..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The burst size of egress.
For BBS1000/1000+ The validate value range is 4|8|16|32|64|128|256|512;
For BBS4000 The validate value range is 0~13, (0: disable, others: 32Kbits * 2^(x-1)."
-- DEFVAL()
::= { utsIntfRateControlEntry 18 }
utsIntfRateControlUplinkDuplexStatus OBJECT-TYPE
SYNTAX INTEGER
{
full-duplex(1),
half-duplex(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the duplex status of the port. For uplink port only."
DEFVAL{full-duplex}
::= { utsIntfRateControlEntry 19 }
-- Lay 2 span tree protocol(STP/RSTP) MIB
utsEponBridgeObjects OBJECT IDENTIFIER ::= { utsLayer2ConfExt 4 }
utsEponDot1dStpTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsEponDot1dStpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for interface rate control MIB objects."
::= { utsEponBridgeObjects 1 }
utsEponDot1dStpEntry OBJECT-TYPE
SYNTAX UtsEponDot1dStpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the epon 802.1d stp MIB table."
INDEX {utsEponDot1dStpBridgeVlanID }
::= { utsEponDot1dStpTable 1 }
UtsEponDot1dStpEntry ::=
SEQUENCE {
utsEponDot1dStpBridgeVlanID INTEGER,
utsDot1dStpPriority INTEGER,
utsDot1dStpTimeSinceTopologyChange TimeTicks,
utsDot1dStpTopChanges Counter,
utsDot1dStpDesignatedRoot BridgeId,
utsDot1dStpRootCost INTEGER,
utsDot1dStpRootPort INTEGER,
utsDot1dStpMaxAge Timeout,
utsDot1dStpHelloTime Timeout,
utsDot1dStpHoldTime INTEGER,
utsDot1dStpForwardDelay Timeout,
utsDot1dStpBridgeMaxAge Timeout,
utsDot1dStpBridgeHelloTime Timeout,
utsDot1dStpBridgeForwardDelay Timeout,
utsDot1dStpBridgeOwnBridgeID BridgeId
}
utsEponDot1dStpBridgeVlanID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID "
::= { utsEponDot1dStpEntry 1 }
utsDot1dStpPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge Priority, an Unsigned value used to represent the priority
component of a Bridge Identifier. Valid Bridge Priorities are in the
range 0 through 61 440, in steps of 4096."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.7"
::= { utsEponDot1dStpEntry 2 }
utsDot1dStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { utsEponDot1dStpEntry 3 }
utsDot1dStpTopChanges OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { utsEponDot1dStpEntry 4 }
utsDot1dStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { utsEponDot1dStpEntry 5 }
utsDot1dStpRootCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { utsEponDot1dStpEntry 6 }
utsDot1dStpRootPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { utsEponDot1dStpEntry 7 }
utsDot1dStpMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { utsEponDot1dStpEntry 8 }
utsDot1dStpHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { utsEponDot1dStpEntry 9 }
utsDot1dStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { utsEponDot1dStpEntry 10 }
utsDot1dStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { utsEponDot1dStpEntry 11 }
utsDot1dStpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.8"
::= { utsEponDot1dStpEntry 12 }
utsDot1dStpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.9"
::= { utsEponDot1dStpEntry 13 }
utsDot1dStpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.10"
::= { utsEponDot1dStpEntry 14 }
utsDot1dStpBridgeOwnBridgeID OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the bridge identifier of this swith."
::= { utsEponDot1dStpEntry 15 }
-- The Spanning Tree Port Table
utsEponDot1dStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsEponDot1dStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { utsEponBridgeObjects 2 }
utsEponDot1dStpPortEntry OBJECT-TYPE
SYNTAX UtsEponDot1dStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { utsEponDot1dStpPortIntfIndex, utsEponDot1dStpPortVlanID }
::= { utsEponDot1dStpPortTable 1 }
UtsEponDot1dStpPortEntry ::=
SEQUENCE {
utsEponDot1dStpPortIntfIndex
INTEGER,
utsEponDot1dStpPortVlanID
INTEGER,
utsEponDot1dStpModuleID
INTEGER,
utsEponDot1dStpPortID
INTEGER,
utsEponDot1dStpPortLagID
INTEGER,
utsEponDot1dStpPortPriority
INTEGER,
utsEponDot1dStpPortState
INTEGER,
utsEponDot1dStpPortEnable
INTEGER,
utsEponDot1dStpPortPathCost
INTEGER,
utsEponDot1dStpPortDesignatedRoot
BridgeId,
utsEponDot1dStpPortDesignatedCost
INTEGER,
utsEponDot1dStpPortDesignatedBridge
BridgeId,
utsEponDot1dStpPortDesignatedPort
OCTET STRING,
-- utsEponDot1dStpPortForwardTransitions
-- Counter,
utsEponDot1dStpPortFastEnable
INTEGER
}
utsEponDot1dStpPortIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregations,
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsEponDot1dStpPortEntry 1 }
utsEponDot1dStpPortVlanID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan ID that will run stp protocol."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { utsEponDot1dStpPortEntry 2 }
utsEponDot1dStpModuleID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information.
For 1000: The range is 1-3.
For 4000: The range is 1-12."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { utsEponDot1dStpPortEntry 3 }
utsEponDot1dStpPortID OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { utsEponDot1dStpPortEntry 4 }
utsEponDot1dStpPortLagID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Aggregation Port Id on which STP is runing. "
::= { utsEponDot1dStpPortEntry 5 }
utsEponDot1dStpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.1"
::= { utsEponDot1dStpPortEntry 6 }
utsEponDot1dStpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { utsEponDot1dStpPortEntry 7 }
utsEponDot1dStpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { utsEponDot1dStpPortEntry 8 }
utsEponDot1dStpPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..20000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { utsEponDot1dStpPortEntry 9 }
utsEponDot1dStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { utsEponDot1dStpPortEntry 10 }
utsEponDot1dStpPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { utsEponDot1dStpPortEntry 11 }
utsEponDot1dStpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { utsEponDot1dStpPortEntry 12 }
utsEponDot1dStpPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { utsEponDot1dStpPortEntry 13 }
--utsEponDot1dStpPortForwardTransitions OBJECT-TYPE
-- SYNTAX Counter
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of times this port has transitioned
-- from the Learning state to the Forwarding state."
-- ::= { utsEponDot1dStpPortEntry 14 }
utsEponDot1dStpPortFastEnable OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { utsEponDot1dStpPortEntry 15 }
-- igmp snooping configuration
utsIgmpSnoopCfgObjects OBJECT IDENTIFIER ::= { utsLayer2ConfExt 5 }
utsIgmpSnoopCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIgmpSnoopCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for igmp snoop control MIB objects."
::= { utsIgmpSnoopCfgObjects 1 }
utsIgmpSnoopCfgEntry OBJECT-TYPE
SYNTAX UtsIgmpSnoopCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the lagMIB extension table for vlan."
INDEX { utsIgmpSnoopVlanId }
::= { utsIgmpSnoopCfgTable 1 }
UtsIgmpSnoopCfgEntry ::=
SEQUENCE {
utsIgmpSnoopVlanId INTEGER,
utsIgmpSnoopLastMembAgeTmr INTEGER,
utsIgmpSnoopMCAgeTmr INTEGER,
utsIgmpSnoopRouterAgeTmr INTEGER,
utsIgmpSnoopSrcOnlyMcAgeTmr INTEGER
}
utsIgmpSnoopVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of what vlan index of the 802.1q is running."
::= { utsIgmpSnoopCfgEntry 1 }
utsIgmpSnoopLastMembAgeTmr OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"igmp last member age timer."
::= { utsIgmpSnoopCfgEntry 2 }
utsIgmpSnoopMCAgeTmr OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"igmp multicast cache item ageing time."
::= { utsIgmpSnoopCfgEntry 3 }
utsIgmpSnoopRouterAgeTmr OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Router Age Timer."
::= { utsIgmpSnoopCfgEntry 4 }
utsIgmpSnoopSrcOnlyMcAgeTmr OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Source Only Multicast Age Timer"
::= { utsIgmpSnoopCfgEntry 5 }
-- Add the monitor session by tomsong 20070906
--utsMonitorSessionObjects OBJECT IDENTIFIER ::= { utsLayer2ConfExt 6 }
--
-- utsMonitorSessionControlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF UtsMonitorSessionControlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for monitor session MIB objects."
-- ::= { utsMonitorSessionObjects 1 }
--
-- utsMonitorSessionControlEntry OBJECT-TYPE
-- SYNTAX UtsMonitorSessionControlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "An entry in the monitor session control MIB table."
-- INDEX {utsMonitorSessionID }
-- ::= { utsMonitorSessionControlTable 1 }
--
-- UtsMonitorSessionControlEntry ::=
-- SEQUENCE {
-- utsMonitorSessionID INTEGER,
-- utsMonitorSessionModule INTEGER,
-- utsMonitorSessionPort INTEGER,
-- utsMonitorSessionIngressPortBitLists OCTET STRING,
-- utsMonitorSessionEngressPortBitLists OCTET STRING,
-- utsMonitorSessionActive INTEGER,
-- utsMonitorSessionRowStatus RowStatus
-- }
--
-- utsMonitorSessionID OBJECT-TYPE
-- SYNTAX INTEGER(1..4)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Monitor session ID."
-- ::= { utsMonitorSessionControlEntry 1 }
--
-- utsMonitorSessionModule OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Monitor session control module number."
-- ::= { utsMonitorSessionControlEntry 2 }
--
--
-- utsMonitorSessionPort OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Monitor session control port umber."
-- ::= { utsMonitorSessionControlEntry 3 }
--
--
-- utsMonitorSessionIngressPortBitLists OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Monitor session control ingress port bit lists ."
-- ::= { utsMonitorSessionControlEntry 4 }
--
--
-- utsMonitorSessionEngressPortBitLists OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Monitor session control ingress port bit lists ."
-- ::= { utsMonitorSessionControlEntry 5 }
--
--
-- utsMonitorSessionActive OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Monitor session enable or disable."
-- ::= { utsMonitorSessionControlEntry 6 }
--
--
-- utsMonitorSessionRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Row status"
-- ::= { utsMonitorSessionControlEntry 7 }
--
-- SUPER SVI group
--
utsLayer3ConfExt OBJECT IDENTIFIER ::= { utsEthIfExtObjects 6 }
-- utsIntfSuperSVIGroup OBJECT IDENTIFIER ::= { utsLayer3ConfExt 1 }
utsIntfSuperSVITable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIntfSuperSVIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Super SVI Vlan entries"
::= { utsLayer3ConfExt 1 }
utsIntfSuperSVIEntry OBJECT-TYPE
SYNTAX UtsIntfSuperSVIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the utsIntfSuperSVITable"
INDEX { utsIntfSuperSVIVlanId }
::= { utsIntfSuperSVITable 1 }
UtsIntfSuperSVIEntry ::=
SEQUENCE {
utsIntfSuperSVIVlanId INTEGER,
utsIntfSuperSVIVlanMemberBitmap OCTET STRING,
utsIntfSuperSVIVlanRowStatus RowStatus
}
utsIntfSuperSVIVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethernet interface super vlan if number."
::= { utsIntfSuperSVIEntry 1 }
utsIntfSuperSVIVlanMemberBitmap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..520))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethernet interface super vlan if number."
::= { utsIntfSuperSVIEntry 2 }
utsIntfSuperSVIVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethernet interface super vlan table row status."
::= { utsIntfSuperSVIEntry 3 }
--
-- L3 static route table
--
utsStaticRouteObjects OBJECT IDENTIFIER ::= { utsLayer3ConfExt 2 }
utsStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for interface static route MIB objects."
::= { utsStaticRouteObjects 1 }
utsStaticRouteEntry OBJECT-TYPE
SYNTAX UtsStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interface static route MIB table."
INDEX {utsStaticRouteIpAddress, utsStaticRouteSubnetMask, utsStaticRouteNextHop }
::= { utsStaticRouteTable 1 }
UtsStaticRouteEntry ::=
SEQUENCE {
utsStaticRouteIpAddress IpAddress,
utsStaticRouteSubnetMask IpAddress,
utsStaticRouteNextHop IpAddress,
utsStaticRouteIfIndex INTEGER,
utsStaticRouteMetric INTEGER,
utsStaticRouteStatus RowStatus
}
utsStaticRouteIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static route entry's ip address."
::= { utsStaticRouteEntry 1 }
utsStaticRouteSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static route entry's subnet mask."
::= { utsStaticRouteEntry 2 }
utsStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static route entry's next hop's ip address."
::= { utsStaticRouteEntry 3 }
utsStaticRouteIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Static route entry's interface number."
::= { utsStaticRouteEntry 4 }
utsStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static route entry's metric, can not modify it after created. "
::= { utsStaticRouteEntry 5 }
utsStaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static route entry's row status."
::= { utsStaticRouteEntry 6 }
--
-- DHCP global configuration
--
utsLayer3DHCPExt OBJECT IDENTIFIER ::= { utsLayer3ConfExt 3 }
utsDHCPServiceGroup OBJECT IDENTIFIER ::= { utsLayer3DHCPExt 1 }
utsDHCPServiceState OBJECT-TYPE
SYNTAX INTEGER
{
no-service(1),
server-active(2),
relay-active(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP service type and state."
::= { utsDHCPServiceGroup 1 }
utsDHCPRelayOption82 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable The DHCP option82 operation."
::= { utsDHCPServiceGroup 2 }
utsDHCPRelayInforChk OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable DHCP security check."
::= { utsDHCPServiceGroup 3 }
utsDHCPRelayPolicy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dhcp relay option parameter ."
::= { utsDHCPServiceGroup 4 }
utsDHCPRelayMaxhop OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum hop between client and server."
::= { utsDHCPServiceGroup 5 }
utsDHCPServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
rfc2131(1),
sbb(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"dhcp server service mode selection"
::= { utsDHCPServiceGroup 6 }
-- utsDHCPBindingClear OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- clearAllDynamic(1)
-- }
-- MAX-ACCESS write-only
-- STATUS current
-- DESCRIPTION
-- "Clear DHCP binding for specific type."
-- ::= { utsDHCPServiceGroup 10 }
-- utsDHCPRelayClear OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- clearStatistics(1)
-- }
-- MAX-ACCESS write-only
-- STATUS current
-- DESCRIPTION
-- "Clear DHCP relay agent statistics."
-- ::= { utsDHCPServiceGroup 11 }
-- utsDHCPServerClear OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- clearStatistics(1)
-- }
-- MAX-ACCESS write-only
-- STATUS current
-- DESCRIPTION
-- "Clear DHCP server statistics."
-- ::= { utsDHCPServiceGroup 12 }
--
-- DHCP POOL table
--
utsDHCPPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool MIB objects."
::= { utsLayer3DHCPExt 2 }
utsDHCPPoolEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool MIB table."
INDEX { utsDHCPPoolName }
::= { utsDHCPPoolTable 1 }
UtsDHCPPoolEntry ::=
SEQUENCE {
utsDHCPPoolName DisplayString,
utsDHCPPoolDomainName DisplayString,
utsDHCPPoolNetworkAddress IpAddress,
utsDHCPPoolNetworkMask IpAddress,
utsDHCPPoolClassId DisplayString,
utsDHCPPoolLeaseTime INTEGER,
utsDHCPPoolMeritDump DisplayString,
utsDHCPPoolRootPath DisplayString,
utsDHCPPoolStatus RowStatus
}
utsDHCPPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool name. "
::= { utsDHCPPoolEntry 1 }
utsDHCPPoolDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP domain name. "
::= { utsDHCPPoolEntry 2 }
utsDHCPPoolNetworkAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool network number. when create a pool entry, network address must provide. "
::= { utsDHCPPoolEntry 3 }
utsDHCPPoolNetworkMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool network mask, when create a pool entry, network address must provide."
::= { utsDHCPPoolEntry 4 }
utsDHCPPoolClassId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool class id for VoIP pool"
::= { utsDHCPPoolEntry 5 }
utsDHCPPoolLeaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool lease time in minutes,-1 means infinite"
::= { utsDHCPPoolEntry 6 }
utsDHCPPoolMeritDump OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool path-name of a file to which the client's core image should be dumped in the event the client crashes."
::= { utsDHCPPoolEntry 7 }
utsDHCPPoolRootPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the path-name that contains the client's root disk."
::= { utsDHCPPoolEntry 8 }
utsDHCPPoolStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool entry status"
::= { utsDHCPPoolEntry 11 }
--
-- DHCP pool dns server table
--
utsDHCPPoolDnsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool dns server MIB objects."
::= { utsLayer3DHCPExt 3 }
utsDHCPPoolDnsServerEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool dns server MIB table. maximum entries number is 8."
INDEX { utsDHCPPoolName, utsDHCPPoolDnsServerIpAddress }
::= { utsDHCPPoolDnsServerTable 1 }
UtsDHCPPoolDnsServerEntry ::=
SEQUENCE {
-- utsDHCPPoolDnsServerPoolName DisplayString,
utsDHCPPoolDnsServerIpAddress IpAddress,
utsDHCPPoolDnsServerDomainName DisplayString,
utsDHCPPoolDnsServerStatus RowStatus
}
--utsDHCPPoolDnsServerPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP dns server pool name. "
-- ::= { utsDHCPPoolDnsServerEntry 1 }
utsDHCPPoolDnsServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool dns server ip address."
::= { utsDHCPPoolDnsServerEntry 2 }
utsDHCPPoolDnsServerDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP dns-server pool domain name. "
::= { utsDHCPPoolDnsServerEntry 3 }
utsDHCPPoolDnsServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP dns-server table entry status. "
::= { utsDHCPPoolDnsServerEntry 4 }
--
-- default router
--
-- DHCP pool default router table
--
--
utsDHCPPoolDefaultRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolDefaultRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool default router MIB objects."
::= { utsLayer3DHCPExt 4 }
utsDHCPPoolDefaultRouterEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolDefaultRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool default router MIB table, maximum number is 1."
INDEX { utsDHCPPoolName, utsDHCPPoolDefaultRouterIpAddress }
::= { utsDHCPPoolDefaultRouterTable 1 }
UtsDHCPPoolDefaultRouterEntry ::=
SEQUENCE {
-- utsDHCPPoolDefaultRouterPoolName DisplayString,
utsDHCPPoolDefaultRouterIpAddress IpAddress,
-- utsDHCPPoolDefaultRouterDomainName DisplayString,
utsDHCPPoolDefaultRouterStatus RowStatus
}
--utsDHCPPoolDefaultRouterPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP default router pool name. "
-- ::= { utsDHCPPoolDefaultRouterEntry 1 }
utsDHCPPoolDefaultRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool default router ip address."
::= { utsDHCPPoolDefaultRouterEntry 2 }
--utsDHCPPoolDefaultRouterDomainName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP default router pool domain name. "
-- ::= { utsDHCPPoolDefaultRouterEntry 3 }
utsDHCPPoolDefaultRouterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP default router entry status "
::= { utsDHCPPoolDefaultRouterEntry 4 }
--
-- DHCP pool excluded address table
--
utsDHCPPoolExcludedTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolExcludedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool excluded MIB objects."
::= { utsLayer3DHCPExt 5 }
utsDHCPPoolExcludedEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolExcludedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool excluded MIB table, maximum entries is 8."
INDEX { utsDHCPPoolName, utsDHCPPoolExcludedLowIpAddress }
::= { utsDHCPPoolExcludedTable 1 }
UtsDHCPPoolExcludedEntry ::=
SEQUENCE {
-- utsDHCPPoolExcludedPoolName DisplayString,
utsDHCPPoolExcludedLowIpAddress IpAddress,
utsDHCPPoolExcludedHighIpAddress IpAddress,
-- utsDHCPPoolExcludedDomainName DisplayString,
utsDHCPPoolExcludedStatus RowStatus
}
--utsDHCPPoolExcludedPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP excluded address pool name. "
-- ::= { utsDHCPPoolExcludedEntry 1 }
utsDHCPPoolExcludedLowIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool excluded low ip address."
::= { utsDHCPPoolExcludedEntry 2 }
utsDHCPPoolExcludedHighIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool excluded high ip address"
::= { utsDHCPPoolExcludedEntry 3 }
--utsDHCPPoolExcludedDomainName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP excluded pool domain name. "
-- ::= { utsDHCPPoolExcludedEntry 4 }
utsDHCPPoolExcludedStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool excluded row status"
::= { utsDHCPPoolExcludedEntry 5 }
--
-- DHCP manual binding table
--
utsDHCPPoolManualBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolManualBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool manual bind MIB objects."
::= { utsLayer3DHCPExt 6 }
utsDHCPPoolManualBindEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolManualBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool manual bind MIB table."
INDEX { utsDHCPPoolName, utsDHCPPoolManualBindIpAddress }
::= { utsDHCPPoolManualBindTable 1 }
UtsDHCPPoolManualBindEntry ::=
SEQUENCE {
-- utsDHCPPoolManualBindPoolName DisplayString,
utsDHCPPoolManualBindIpAddress IpAddress,
utsDHCPPoolManualBindVlanId INTEGER,
utsDHCPPoolManualBindHardwareAddress MacAddress,
-- utsDHCPPoolManualBindDomainName DisplayString,
utsDHCPPoolManualBindStatus RowStatus
}
--utsDHCPPoolManualBindPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP manual bind pool name. "
-- ::= { utsDHCPPoolManualBindEntry 1 }
utsDHCPPoolManualBindIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool default router ip address"
::= { utsDHCPPoolManualBindEntry 2 }
utsDHCPPoolManualBindVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool manual bind vlan id. "
::= { utsDHCPPoolManualBindEntry 3 }
utsDHCPPoolManualBindHardwareAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool manual bind hardware mac address. "
::= { utsDHCPPoolManualBindEntry 4 }
--utsDHCPPoolManualBindDomainName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP manual bind pool domain name. "
-- ::= { utsDHCPPoolManualBindEntry 5 }
utsDHCPPoolManualBindStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool manual bind entry status. "
::= { utsDHCPPoolManualBindEntry 6 }
--
-- SHOW ip dhcp binding
--
utsIpDHCPPoolBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIpDHCPPoolBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for ip dhcp pool binding MIB objects."
::= { utsLayer3DHCPExt 7 }
utsIpDHCPPoolBindingEntry OBJECT-TYPE
SYNTAX UtsIpDHCPPoolBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ip DHCP pool binding MIB table."
INDEX { utsDHCPPoolName, utsIpDHCPPoolBindingIpAddress }
::= { utsIpDHCPPoolBindingTable 1 }
UtsIpDHCPPoolBindingEntry ::=
SEQUENCE {
-- utsIpDHCPPoolBindingPoolName DisplayString,
utsIpDHCPPoolBindingIpAddress IpAddress,
utsIpDHCPPoolBindingVlanId INTEGER,
utsIpDHCPPoolBindingState INTEGER,
utsIpDHCPPoolBindingType INTEGER,
utsIpDHCPPoolBindingHardwareAddress MacAddress,
utsIpDHCPPoolBindingLeaseExpiredTime DisplayString,
utsIpDHCPPoolBindingClear INTEGER
}
--utsIpDHCPPoolBindingPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP binding pool name. "
-- ::= { utsIpDHCPPoolBindingEntry 1 }
utsIpDHCPPoolBindingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP binding ip address. "
::= { utsIpDHCPPoolBindingEntry 2 }
utsIpDHCPPoolBindingVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP pool manual bind vlan id for VoIP pool. "
::= { utsIpDHCPPoolBindingEntry 3 }
utsIpDHCPPoolBindingState OBJECT-TYPE
SYNTAX INTEGER
{
free(1),
expire(2),
offer(3),
bind(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP binding state"
::= { utsIpDHCPPoolBindingEntry 4 }
utsIpDHCPPoolBindingType OBJECT-TYPE
SYNTAX INTEGER
{
automatic(1),
manual(2),
framed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP binding type"
::= { utsIpDHCPPoolBindingEntry 5 }
utsIpDHCPPoolBindingHardwareAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP pool manual bind hardware mac address. "
::= { utsIpDHCPPoolBindingEntry 6 }
utsIpDHCPPoolBindingLeaseExpiredTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP pool manual bind lease time. "
::= { utsIpDHCPPoolBindingEntry 7 }
utsIpDHCPPoolBindingClear OBJECT-TYPE
SYNTAX INTEGER
{
normal(0), -- read only for normal statuss
clear(1) -- write to delete the current binding entry
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Release the specific binding."
::= { utsIpDHCPPoolBindingEntry 8 }
------
------ NTP server
------
--
-- DHCP pool ntp server table
--
utsDHCPPoolNtpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool ntp server MIB objects."
::= { utsLayer3DHCPExt 8 }
utsDHCPPoolNtpServerEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool ntp server MIB table. max entry number is 3."
INDEX { utsDHCPPoolName, utsDHCPPoolNtpServerIpAddress }
::= { utsDHCPPoolNtpServerTable 1 }
UtsDHCPPoolNtpServerEntry ::=
SEQUENCE {
-- utsDHCPPoolNtpServerPoolName DisplayString,
utsDHCPPoolNtpServerIpAddress IpAddress,
-- utsDHCPPoolNtpServerDomainName DisplayString,
utsDHCPPoolNtpServerStatus RowStatus
}
--utsDHCPPoolNtpServerPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP ntp server pool name. "
-- ::= { utsDHCPPoolNtpServerEntry 1 }
utsDHCPPoolNtpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool ntp server ip address."
::= { utsDHCPPoolNtpServerEntry 2 }
--utsDHCPPoolNtpServerDomainName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
--"DHCP ntp-server pool domain name. "
-- ::= { utsDHCPPoolNtpServerEntry 3 }
utsDHCPPoolNtpServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP ntp-server entry status. "
::= { utsDHCPPoolNtpServerEntry 4 }
------
------ log server
------
--
-- DHCP pool log server table
--
utsDHCPPoolLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool log server MIB objects."
::= { utsLayer3DHCPExt 9 }
utsDHCPPoolLogServerEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool log server MIB table, max entry number is 3."
INDEX { utsDHCPPoolName, utsDHCPPoolLogServerIpAddress }
::= { utsDHCPPoolLogServerTable 1 }
UtsDHCPPoolLogServerEntry ::=
SEQUENCE {
-- utsDHCPPoolLogServerPoolName DisplayString,
utsDHCPPoolLogServerIpAddress IpAddress,
-- utsDHCPPoolLogServerDomainName DisplayString,
utsDHCPPoolLogServerStatus RowStatus
}
--utsDHCPPoolLogServerPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "DHCP log server pool name. "
-- ::= { utsDHCPPoolLogServerEntry 1 }
utsDHCPPoolLogServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool log server ip address"
::= { utsDHCPPoolLogServerEntry 2 }
--utsDHCPPoolLogServerDomainName OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "DHCP log server pool domain name. "
-- ::= { utsDHCPPoolLogServerEntry 3 }
utsDHCPPoolLogServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP log server entry status. "
::= { utsDHCPPoolLogServerEntry 4 }
------
------ LPR server
------
--
-- DHCP pool LPR server table
--
--utsDHCPPoolLprServerTable OBJECT-TYPE
--SYNTAX SEQUENCE OF UtsDHCPPoolLprServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"Table for dhcp pool Lpr server MIB objects."
-- ::= { utsLayer3DHCPExt 10 }
--
--utsDHCPPoolLprServerEntry OBJECT-TYPE
--SYNTAX UtsDHCPPoolLprServerEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"An entry in the DHCP pool Lpr server MIB table."
-- INDEX { utsDHCPPoolLprServerPoolName, utsDHCPPoolLprServerIpAddress }
-- ::= { utsDHCPPoolLprServerTable 1 }
--
--UtsDHCPPoolLprServerEntry ::=
-- SEQUENCE {
-- utsDHCPPoolLprServerPoolName DisplayString,
-- utsDHCPPoolLprServerIpAddress IpAddress,
-- utsDHCPPoolLprServerDomainName DisplayString,
-- utsDHCPPoolLprServerStatus RowStatus
--
--}
--
--utsDHCPPoolLprServerPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP Lpr server pool name. "
-- ::= { utsDHCPPoolLprServerEntry 1 }
--
--
--
--utsDHCPPoolLprServerIpAddress OBJECT-TYPE
--SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"DHCP pool Lpr server ip address"
-- ::= { utsDHCPPoolLprServerEntry 2 }
--
--utsDHCPPoolLprServerDomainName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP dns-server pool domain name. "
-- ::= { utsDHCPPoolLprServerEntry 3 }
--
--utsDHCPPoolLprServerStatus OBJECT-TYPE
--SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
--"DHCP lpr-server status "
-- ::= { utsDHCPPoolLprServerEntry 4 }
--
-- DHCP pool included address table
--
utsDHCPPoolIncludedTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPPoolIncludedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp pool included MIB objects."
::= { utsLayer3DHCPExt 11 }
utsDHCPPoolIncludedEntry OBJECT-TYPE
SYNTAX UtsDHCPPoolIncludedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP pool excluded MIB table, maximum number is 8."
INDEX { utsDHCPPoolName, utsDHCPPoolIncludedLowIpAddress }
::= { utsDHCPPoolIncludedTable 1 }
UtsDHCPPoolIncludedEntry ::=
SEQUENCE {
-- utsDHCPPoolIncludedPoolName DisplayString,
utsDHCPPoolIncludedLowIpAddress IpAddress,
utsDHCPPoolIncludedHighIpAddress IpAddress,
-- utsDHCPPoolIncludedDomainName DisplayString,
utsDHCPPoolIncludedStatus RowStatus
}
--utsDHCPPoolIncludedPoolName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP included address pool name. "
-- ::= { utsDHCPPoolIncludedEntry 1 }
utsDHCPPoolIncludedLowIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool included low ip address"
::= { utsDHCPPoolIncludedEntry 2 }
utsDHCPPoolIncludedHighIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool included high ip address"
::= { utsDHCPPoolIncludedEntry 3 }
--utsDHCPPoolIncludedDomainName OBJECT-TYPE
--SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"DHCP included pool domain name. "
-- ::= { utsDHCPPoolIncludedEntry 4 }
utsDHCPPoolIncludedStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP pool included row status"
::= { utsDHCPPoolIncludedEntry 5 }
--
-- DHCP relay server table
--
utsDHCPRelayServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPRelayServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dhcp relay dhcp server MIB objects."
::= { utsLayer3DHCPExt 12 }
utsDHCPRelayServerEntry OBJECT-TYPE
SYNTAX UtsDHCPRelayServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP relay server MIB table."
INDEX { utsDHCPRelayIfIndex }
::= { utsDHCPRelayServerTable 1 }
UtsDHCPRelayServerEntry ::=
SEQUENCE {
utsDHCPRelayIfIndex InterfaceIndex,
utsDHCPRelayServerID IpAddress,
utsDHCPRelayGateway IpAddress,
utsDHCPRelayStatus RowStatus,
utsDHCPRelaySecondServer IpAddress
}
utsDHCPRelayIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP server IP address configured for this interface."
::= { utsDHCPRelayServerEntry 1 }
utsDHCPRelayServerID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"primary DHCP server IP address configured for this interface."
::= { utsDHCPRelayServerEntry 2 }
utsDHCPRelayGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure gateway IP address to DHCP server."
::= { utsDHCPRelayServerEntry 3 }
utsDHCPRelayStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"dhcp relay Server row status. "
::= { utsDHCPRelayServerEntry 4 }
utsDHCPRelaySecondServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"secondary DHCP server IP address configured for this interface. zero means no secondary server is configured."
::= { utsDHCPRelayServerEntry 5 }
--
-- DHCP number of lease in specific VLAN
--
utsDHCPLeaseNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDHCPLeaseNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for the MIB objects of dhcp VLAN lease number under Custom mode."
::= { utsLayer3DHCPExt 13 }
utsDHCPLeaseNumEntry OBJECT-TYPE
SYNTAX UtsDHCPLeaseNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DHCP VLAN lease number MIB table."
INDEX { utsDHCPLeaseNumVlan }
::= { utsDHCPLeaseNumTable 1 }
UtsDHCPLeaseNumEntry ::=
SEQUENCE {
utsDHCPLeaseNumVlan INTEGER,
utsDHCPLeaseNumVal INTEGER,
utsDHCPLeaseNumStatus RowStatus
}
utsDHCPLeaseNumVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID"
::= { utsDHCPLeaseNumEntry 1 }
utsDHCPLeaseNumVal OBJECT-TYPE
SYNTAX INTEGER(1..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The lease number for specific VLAN"
::= { utsDHCPLeaseNumEntry 2 }
utsDHCPLeaseNumStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry."
::= { utsDHCPLeaseNumEntry 3 }
------
------
------
------ SNTP
------
------
utsIpSNTPExt OBJECT IDENTIFIER ::= { utsLayer3ConfExt 4 }
utsSNTPGroup OBJECT IDENTIFIER ::= { utsIpSNTPExt 1 }
utsSNTPServiceState OBJECT-TYPE
SYNTAX INTEGER
{
no-service(1),
client-active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP serive type and state."
::= { utsSNTPGroup 1 }
utsSNTPPollInterval OBJECT-TYPE
SYNTAX INTEGER(16..16284)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Polling Interval."
::= { utsSNTPGroup 2 }
utsSNTPTimeZone OBJECT-TYPE
SYNTAX INTEGER(-12..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Timezone."
::= { utsSNTPGroup 3 }
utsSNTPClockSync OBJECT-TYPE
SYNTAX INTEGER
{
force-sync(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP clock."
::= { utsSNTPGroup 4 }
utsSNTPCurrentTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNTP current time."
::= { utsSNTPGroup 5 }
utsSNTPLastUpdateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNTP last update time."
::= { utsSNTPGroup 6 }
--
-- SNTP Server table
--
utsSNTPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsSNTPServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for SNTP Server MIB objects."
::= { utsIpSNTPExt 2 }
utsSNTPServerEntry OBJECT-TYPE
SYNTAX UtsSNTPServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the SNTP Server MIB table."
INDEX { utsSNTPServerId }
::= { utsSNTPServerTable 1 }
UtsSNTPServerEntry ::=
SEQUENCE {
utsSNTPServerId INTEGER,
utsSNTPServerIpAddress IpAddress,
utsSNTPServerState INTEGER,
utsSNTPServerVersion DisplayString,
utsSNTPServerStatus RowStatus
}
utsSNTPServerId OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNTP Server Id. "
::= { utsSNTPServerEntry 1 }
utsSNTPServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNTP Server Address. "
::= { utsSNTPServerEntry 2 }
utsSNTPServerState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNTP Server State. "
::= { utsSNTPServerEntry 3 }
utsSNTPServerVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNTP Server version info, range 1-4. "
::= { utsSNTPServerEntry 4 }
utsSNTPServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNTP Server status. "
::= { utsSNTPServerEntry 5 }
utsHostRouteObjs OBJECT IDENTIFIER ::= { utsLayer3ConfExt 5 }
utsHostRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsHostRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for host route."
::= { utsHostRouteObjs 1 }
utsHostRouteEntry OBJECT-TYPE
SYNTAX UtsHostRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the host route MIB table."
INDEX { utsHostRouteIpAddress }
::= { utsHostRouteTable 1 }
UtsHostRouteEntry ::=
SEQUENCE {
utsHostRouteIpAddress
IpAddress,
utsHostRouteType
INTEGER,
utsHostRouteModuleId
INTEGER,
utsHostRoutePortId
INTEGER,
utsHostRouteLinkAggGroupId
INTEGER,
utsHostRouteVlanId
INTEGER,
utsHostRouteArpType
INTEGER,
utsHostRouteVlanSubVlanId
INTEGER,
utsHostRouteMacAddress
MacAddress,
utsHostRouteRowStatus
RowStatus
}
utsHostRouteIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the Host Route Entry."
::= { utsHostRouteEntry 1 }
utsHostRouteType OBJECT-TYPE
SYNTAX INTEGER {
port-based(1),
lag-based(2),
-- loop-back-type(3),
vlan-based(4),
-- super-vlan-based(5),
onu-vlan-based(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the host route type."
::= { utsHostRouteEntry 2 }
utsHostRouteModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Module Id of the Host Route Entry. It is valid if the HostRouteType
is port-based or valid when vlan-based member has been added."
::= { utsHostRouteEntry 3 }
utsHostRoutePortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port Id of the Host Route Entry. It is valid if the HostRouteType
is port-based or valid when vlan-based member has been added"
::= { utsHostRouteEntry 4 }
utsHostRouteLinkAggGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port Id of the Host Route Entry. It is only valid if the host route
entry is based on Link Aggregation port. HostRouteType is lag-based"
::= { utsHostRouteEntry 5 }
utsHostRouteVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Id of the Host Route Entry. It is only valid if the host route
entry is based on VLAN Id. HostRouteType is vlan-based"
::= { utsHostRouteEntry 6 }
utsHostRouteArpType OBJECT-TYPE
SYNTAX INTEGER
{
host-route-static(4),
host-route-dynamic(5),
host-route-inherit-from-arp(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identify the arp type of the Host Route Entry. host-route-inherit-from-arp(6) is read-only, not writable."
::= { utsHostRouteEntry 7 }
utsHostRouteVlanSubVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identify the memeber's SubVlan Id within the Super VLAN of the Host
Route Entry. It is only valid if the host route entry is based on
Super VLAN Id. HostRouteType is super-vlan-based"
::= { utsHostRouteEntry 8 }
utsHostRouteMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the MAC address mapping to ip address of host route"
::= { utsHostRouteEntry 9 }
utsHostRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writing invalid has the effect of adding/deleting this entry.
Only be able to create/delete setting to createAndGo/destory.
active will be returned when query"
::= { utsHostRouteEntry 10 }
------
------ iP Route Table
------
utsIpRouteObjects OBJECT IDENTIFIER ::= { utsLayer3ConfExt 6 }
utsIpRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IP Routing Information."
::= { utsIpRouteObjects 1 }
utsIpRouteEntry OBJECT-TYPE
SYNTAX UtsIpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IP route MIB table."
INDEX { utsIpRouteEntryIndex }
::= { utsIpRouteTable 1 }
UtsIpRouteEntry ::=
SEQUENCE {
utsIpRouteEntryIndex INTEGER,
utsIpRouteEntryOwner INTEGER,
utsIpRouteEntryIpAddr IpAddress,
utsIpRouteEntryIpMask IpAddress,
utsIpRouteEntryType INTEGER,
utsIpRouteEntryCost INTEGER,
utsIpRouteEntryNextHop1 IpAddress,
utsIpRouteEntryNextHop2 IpAddress,
utsIpRouteEntryNextHop3 IpAddress,
utsIpRouteEntryNextHop4 IpAddress,
utsIpRouteEntryVlanId1 INTEGER,
utsIpRouteEntryVlanId2 INTEGER,
utsIpRouteEntryVlanId3 INTEGER,
utsIpRouteEntryVlanId4 INTEGER
}
utsIpRouteEntryIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index into the IpRoute Table."
::= { utsIpRouteEntry 1 }
utsIpRouteEntryOwner OBJECT-TYPE
SYNTAX INTEGER
{
direct(1),
static(2),
rip(3),
ospf(4),
bgp(5),
other(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicates which protocol that the route entry derived from.
direct - Direct Connect,
static - Static Route.
rip - Routing Information Protocol,
ospf - Open Shortest Path First.
bgp - Border Gateway Protocol.
other - None of above."
::= { utsIpRouteEntry 2 }
utsIpRouteEntryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the remote network."
::= { utsIpRouteEntry 3 }
utsIpRouteEntryIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Mask of the remote network."
::= { utsIpRouteEntry 4 }
utsIpRouteEntryType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ospfia(2),
ospfe1(3),
ospfe2(4),
ospfnssa2(5),
ospfnssa1(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Route Type of this entry.
ospfia - OSPF Inter Area.
ospfe1 - OSPF External Type 1.
ospfe2 - OSPF External Type 2.
ospfnssa2 - OSPF Not So Stub Area Type 2.
ospfnssa1 - OSPF Not So Stub Area Type 1.
other - Unknown or None of above."
::= { utsIpRouteEntry 5 }
utsIpRouteEntryCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost value of the routing entry for routing protocol specified in utsIpRouteEntryOwner."
::= { utsIpRouteEntry 6 }
utsIpRouteEntryNextHop1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address 1st next hop router."
::= { utsIpRouteEntry 7 }
utsIpRouteEntryNextHop2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address 2nd next hop router."
::= { utsIpRouteEntry 8 }
utsIpRouteEntryNextHop3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address 3rd next hop router."
::= { utsIpRouteEntry 9 }
utsIpRouteEntryNextHop4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address 4th next hop router."
::= { utsIpRouteEntry 10 }
utsIpRouteEntryVlanId1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN Id of the 1st next hop switch."
::= { utsIpRouteEntry 23 }
utsIpRouteEntryVlanId2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN Id of the 2nd next hop switch."
::= { utsIpRouteEntry 24 }
utsIpRouteEntryVlanId3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN Id of the 3rd next hop switch."
::= { utsIpRouteEntry 25 }
utsIpRouteEntryVlanId4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN Id of the 4th next hop switch."
::= { utsIpRouteEntry 26 }
------
------ PIM Global Configuration
------
utsIpMulticastExt OBJECT IDENTIFIER ::= { utsLayer3ConfExt 7 }
utsIpPIMExtConfGroup OBJECT IDENTIFIER ::= { utsIpMulticastExt 1 }
utsIpPIMExtGblCRPHoldTmr OBJECT-TYPE
SYNTAX INTEGER (3..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PIM configured CRP hold timer, Default is 150 secs."
DEFVAL { 150 }
::= { utsIpPIMExtConfGroup 1 }
utsIpPIMExtGblJoinPrunTmr OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure PIM join prune timer, Default is 60 secs."
DEFVAL { 60 }
::= { utsIpPIMExtConfGroup 2 }
utsIpPIMExtGblRpStaticCtrl OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable all rp-static entries, default enabled."
::= { utsIpPIMExtConfGroup 3 }
----
--- ip pim interface configruation
----
utsIpPIMInterfaceCfgObj OBJECT IDENTIFIER ::= { utsIpMulticastExt 2 }
utsPimIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsPimIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OLT MIBs."
::= { utsIpPIMInterfaceCfgObj 1 }
utsPimIntfEntry OBJECT-TYPE
SYNTAX UtsPimIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 PLT MIBs table."
INDEX { utsPimIntfIfIndex }
::= { utsPimIntfTable 1 }
UtsPimIntfEntry ::=
SEQUENCE {
utsPimIntfIfIndex InterfaceIndex,
utsPimIntfAddress IpAddress,
utsPimIntfNetMask IpAddress,
utsPimIntfMode INTEGER,
utsPimIntfDRPriority INTEGER,
-- utsPimIntfHelloHoldtime INTEGER,
utsPimIntfHelloInterval INTEGER,
utsPimIntfJoinPruneInterval INTEGER,
utsPimInterfaceDR IpAddress,
utsPimIntfStatus RowStatus,
-- utsPimIntfCBSRPref INTEGER,
utsPimIntfNeighbNum INTEGER
-- utsPimIntfCBSRHashMask INTEGER
}
utsPimIntfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { utsPimIntfEntry 1 }
utsPimIntfAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the PIM interface."
::= { utsPimIntfEntry 2 }
utsPimIntfNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network mask for the IP address of the PIM interface."
::= { utsPimIntfEntry 3 }
utsPimIntfMode OBJECT-TYPE
SYNTAX INTEGER
{
-- dense(1),
sparse(2),
-- sparseDense(3),
no-pim(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured mode of this PIM interface, set no-pim mode will disable pim on this interface."
::= { utsPimIntfEntry 4 }
utsPimIntfDRPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preference value for the local interface DR election"
DEFVAL { 2 }
::= { utsPimIntfEntry 5 }
--utsPimIntfHelloHoldtime OBJECT-TYPE
--SYNTAX INTEGER (0..65535)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The value set in the Holdtime field of PIM Hello messages
-- transmitted on this interface. A value of 65535 represents
-- an 'infinite' holdtime."
-- ::= { utsPimIntfEntry 6 }
utsPimIntfHelloInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which PIM Hello messages are transmitted on this interface."
DEFVAL { 30 }
::= { utsPimIntfEntry 7 }
utsPimIntfJoinPruneInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which this router sends PIM Join/Prune messages on this PIM interface."
DEFVAL { 60 }
::= { utsPimIntfEntry 8 }
utsPimInterfaceDR OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary IP address of the Designated Router on this PIM interface"
::= { utsPimIntfEntry 9 }
utsPimIntfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry."
::= { utsPimIntfEntry 10 }
utsPimIntfNeighbNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor number of this interface."
::= { utsPimIntfEntry 12 }
--
-- ip pim neighbor mib
--
utsIpPIMNeighborObj OBJECT IDENTIFIER ::= { utsIpMulticastExt 3 }
utsPimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsPimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OLT MIBs."
::= { utsIpPIMNeighborObj 1 }
utsPimNeighborEntry OBJECT-TYPE
SYNTAX UtsPimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in pim neighbor MIBs table."
INDEX { utsPimNeighborAddress }
::= { utsPimNeighborTable 1 }
UtsPimNeighborEntry ::=
SEQUENCE {
utsPimNeighborAddress IpAddress,
utsPimNeighborIfIndex InterfaceIndex,
utsPimNeighborUpTime TimeTicks,
utsPimNeighborExpiryTime TimeTicks,
utsPimNeighborMode INTEGER,
utsPimNeighborDRPriority INTEGER
}
utsPimNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the PIM neighbor for which this entry
contains information."
::= { utsPimNeighborEntry 1 }
utsPimNeighborIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { utsPimNeighborEntry 2 }
utsPimNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor"
::= { utsPimNeighborEntry 3 }
utsPimNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before this PIM neighbor will be aged out"
::= { utsPimNeighborEntry 4 }
utsPimNeighborMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active PIM mode of this neighbor."
::= { utsPimNeighborEntry 5 }
utsPimNeighborDRPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Designated Router Priority from the last PIM Hello message received from this neighbor."
::= { utsPimNeighborEntry 6 }
--
-- ip pim rp table
--
utsIpPIMRPObj OBJECT IDENTIFIER ::= { utsIpMulticastExt 4 }
utsPimRpTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsPimRpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OLT MIBs."
::= { utsIpPIMRPObj 1 }
utsPimRpEntry OBJECT-TYPE
SYNTAX UtsPimRpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 PLT MIBs table."
INDEX { utsPimRpGroupAddress, utsPimRpGroupMask, utsPimRpAddress }
::= { utsPimRpTable 1 }
UtsPimRpEntry ::=
SEQUENCE {
utsPimRpGroupAddress IpAddress,
utsPimRpGroupMask IpAddress,
utsPimRpAddress IpAddress,
utsPimRpUpTime TimeTicks,
utsPimRpHoldTime INTEGER,
utsPimRpPriority INTEGER,
utsPimRpInfoSource IpAddress,
utsPimRpVersion INTEGER,
utsPimRpType INTEGER,
utsPimRpStatus RowStatus
-- utsPimRpActivity INTEGER
}
utsPimRpGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry contains information about an RP."
::= { utsPimRpEntry 1 }
utsPimRpGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast group address mask"
::= { utsPimRpEntry 2 }
utsPimRpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unicast address of the RP."
::= { utsPimRpEntry 3 }
utsPimRpUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this PIM RP (last) was learned by the local router."
::= { utsPimRpEntry 4 }
utsPimRpHoldTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The holdtime of this RP entry. This object is 0 ifpimRPSetRPType is not 'bsr'."
::= { utsPimRpEntry 5 }
utsPimRpPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RP Priority in the PIM Candidate-RP-Advertisement
message or PIM Bootstrap message by which this RP was learned."
::= { utsPimRpEntry 6 }
utsPimRpInfoSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router that this RP information received from."
::= { utsPimRpEntry 7 }
utsPimRpVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of PIM which is running on this interface."
::= { utsPimRpEntry 8 }
utsPimRpType OBJECT-TYPE
SYNTAX INTEGER
{
static (1),
bsr (2),
embedded (3),
other (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the RP was learnt. 'static'
means from local configuration, 'bsr' means the PIM
Bootstrap Router (BSR) mechanism"
::= { utsPimRpEntry 9 }
utsPimRpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry."
::= { utsPimRpEntry 10 }
--
-- ip pim candidate rp table
--
utsIpPIMCandiRPObj OBJECT IDENTIFIER ::= { utsIpMulticastExt 5 }
utsPimCandidateRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsPimCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for pim candidate rp MIBs."
::= { utsIpPIMCandiRPObj 1 }
utsPimCandidateRPEntry OBJECT-TYPE
SYNTAX UtsPimCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the candidate rp MIBs table."
INDEX { utsPimCandidateRPGrpAddress,utsPimCandidateRPGrpAddressMask,utsPimCandidateRPIntfIndex }
::= { utsPimCandidateRPTable 1 }
UtsPimCandidateRPEntry ::=
SEQUENCE {
utsPimCandidateRPIntfIndex InterfaceIndex,
utsPimCandidateRPGrpAddress IpAddress,
utsPimCandidateRPGrpAddressMask IpAddress,
utsPimCandidateRPPriority INTEGER,
utsPimCandidateRPHoldTimer INTEGER,
utsPimCandidateRPRowStatus RowStatus
}
utsPimCandidateRPIntfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { utsPimCandidateRPEntry 1 }
utsPimCandidateRPGrpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Multicast group ip address that the router will advertise to BSR"
::= { utsPimCandidateRPEntry 2 }
utsPimCandidateRPGrpAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Multicast group ip address mask that the router will advertise to BSR"
::= { utsPimCandidateRPEntry 3 }
utsPimCandidateRPPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rp priority."
::= { utsPimCandidateRPEntry 4 }
utsPimCandidateRPHoldTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RP hold time.
For 1000:The range is (3..65535).
For 4000:The range is (0..255)"
DEFVAL{150}
::= { utsPimCandidateRPEntry 5 }
utsPimCandidateRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry"
::= { utsPimCandidateRPEntry 6 }
--
-- ip multicast table
--
utsIpMRouteObj OBJECT IDENTIFIER ::= { utsIpMulticastExt 6 }
utsIpMulticastRoutingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIpMulticastRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OLT MIBs."
::= { utsIpMRouteObj 1 }
utsIpMulticastRoutingEntry OBJECT-TYPE
SYNTAX UtsIpMulticastRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ip multicast route MIBs table."
INDEX { utsIpMRouteGroup,utsIpMRouteOutIfIndex, utsIpMRouteSource}
::= { utsIpMulticastRoutingTable 1 }
UtsIpMulticastRoutingEntry ::=
SEQUENCE {
utsIpMRouteGroup IpAddress,
utsIpMRouteSource IpAddress,
utsIpMRouteSourceMask IpAddress,
utsIpMRouteUpTime TimeTicks,
utsIpMRouteExpiryTime TimeTicks,
utsIpMRouteRpAddress IpAddress,
utsIpMRouteInIfIndex InterfaceIndexOrZero,
utsIpMRouteOutIfIndex InterfaceIndexOrZero,
utsIpMRouteRPFNeighb IpAddress,
utsIpMRouteFlag BITS
}
utsIpMRouteGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry contains multicast routing information."
::= { utsIpMulticastRoutingEntry 1 }
utsIpMRouteSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network address which when combined with the corresponding
value of ipMRouteSourceMask identifies the sources for which
this entry contains multicast routing information."
::= { utsIpMulticastRoutingEntry 2 }
utsIpMRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding value
of ipMRouteSource identifies the sources for which this entry
contains multicast routing information."
::= { utsIpMulticastRoutingEntry 3 }
utsIpMRouteUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information represented
by this entry was learned by the router."
::= { utsIpMulticastRoutingEntry 4 }
utsIpMRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will be aged out."
::= { utsIpMulticastRoutingEntry 5 }
utsIpMRouteRpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the Rendezvous Point (RP) for the group
represented by pimMRouteGroup."
::= { utsIpMulticastRoutingEntry 6 }
utsIpMRouteInIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface on which IP
datagrams sent by these sources to this multicast address are received."
::= { utsIpMulticastRoutingEntry 7 }
utsIpMRouteOutIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface from which IP datagrams of this group will be sent out."
::= { utsIpMulticastRoutingEntry 8 }
utsIpMRouteRPFNeighb OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the RPF neighbor, from which IP datagrams sent by
these sources to this multicast group address are received, or zero
if the RPF neighbor is unknown or is not a PIM neighbor."
::= { utsIpMulticastRoutingEntry 9 }
utsIpMRouteFlag OBJECT-TYPE
SYNTAX BITS {dense(0),
sparse(1),
connected(2),
local(3),
pruned(4),
rp-bit-set(5),
register-flag(6),
spt-bit-set(7),
join-spt(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate multicast route attribute carried on this entry"
::= { utsIpMulticastRoutingEntry 10 }
--
-- IP PIM CBSR Group
-- zhaoxf add 21 Apri,2006
--
utsIpPIMExtCBSRConf OBJECT IDENTIFIER ::= { utsIpMulticastExt 7 }
utsIpPIMExtCBSRStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PIM configured CBSR status, the default status is disabled."
DEFVAL { disable }
::= { utsIpPIMExtCBSRConf 1 }
utsIpPIMExtCBSRInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PIM configured CBSR interface, which must
be a route port interface or SVI or super SVI."
::= { utsIpPIMExtCBSRConf 2 }
utsIpPIMExtCBSRPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for the local interface as a candidate bootstrap router.
This object is mapping to CLI command: ip pim bsr-candidate"
DEFVAL { 0 }
::= { utsIpPIMExtCBSRConf 3}
utsIpPIMExtCBSRHashMaskLen OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hash Mask length for RP selection."
DEFVAL { 0 }
::= { utsIpPIMExtCBSRConf 4 }
------
------ IP ARP Configuration
------
utsIpArpObjs OBJECT IDENTIFIER ::= { utsLayer3ConfExt 8 }
utsEponArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsEponArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for arp mapping entry."
::= { utsIpArpObjs 1 }
utsEponArpEntry OBJECT-TYPE
SYNTAX UtsEponArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the arp MIB table."
INDEX { utsEponArpIpAddress }
::= { utsEponArpTable 1 }
UtsEponArpEntry ::=
SEQUENCE {
utsEponArpIpAddress
IpAddress,
utsEponArpMacAddress
PhysAddress,
utsEponArpIntfType
INTEGER,
utsEponArpModuleId
INTEGER,
utsEponArpPortId
INTEGER,
utsEponArpLinkAggGroupId
INTEGER,
utsEponArpVlanId
INTEGER,
utsEponArpItemType
INTEGER,
utsEponArpVlanSubVlanId
INTEGER,
utsEponArpRowStatus
RowStatus
}
utsEponArpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the arp Entry."
::= { utsEponArpEntry 1 }
utsEponArpMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"mac Address of the arp Entry."
::= { utsEponArpEntry 2 }
utsEponArpIntfType OBJECT-TYPE
SYNTAX INTEGER {
port-based(1),
lag-based(2),
vlan-based(3),
super-vlan-based(4),
onu-vlan-based(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the arp interface type."
::= { utsEponArpEntry 3 }
utsEponArpModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Module Id of the arp Entry. It is valid if the ArpItemType
is port-based or valid when vlan-based member has been added."
::= { utsEponArpEntry 4 }
utsEponArpPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port Id of the arp Entry. It is valid if the ArpItemType
is port-based or valid when vlan-based member has been added"
::= { utsEponArpEntry 5 }
utsEponArpLinkAggGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aggregation link group Id of the arp Entry. It is only valid if the arp
entry is based on Link Aggregation port. ArpItemType is lag-based"
::= { utsEponArpEntry 6 }
utsEponArpVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Id of the arp Entry. It is only valid if the arp
entry is based on VLAN Id. ArpItemType is vlan-based"
::= { utsEponArpEntry 7 }
utsEponArpItemType OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2),
invalid(3),
dhcp(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identify the arp learning type of the arp Entry.
static - created by system operator.
dynamic - learned by arp protocol.
Invalid - not complete "
::= { utsEponArpEntry 8 }
utsEponArpVlanSubVlanId OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identify the memeber's SubVlan Id within the Super VLAN of the arp Entry. It is only
valid if the arp entry is based on Super VLAN Id. ArpItemType is super-vlan-based"
::= { utsEponArpEntry 9 }
utsEponArpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writing invalid has the effect of adding/deleting this entry.
Only be able to create/delete setting to createAndGo/destory.
active will be returned when query"
::= { utsEponArpEntry 10 }
utsIgmpMIBObjects OBJECT IDENTIFIER ::= { utsLayer3ConfExt 9 }
--
-- The IGMP Interface Table
--
utsIgmpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIgmpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the interfaces on which IGMP
is enabled."
::= { utsIgmpMIBObjects 1 }
utsIgmpInterfaceEntry OBJECT-TYPE
SYNTAX UtsIgmpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an interface on
which IGMP is enabled."
INDEX { utsIgmpIntfIfIndex }
::= { utsIgmpInterfaceTable 1 }
UtsIgmpInterfaceEntry ::= SEQUENCE {
utsIgmpIntfIfIndex InterfaceIndex,
utsIgmpIntfVersion INTEGER,
utsIgmpIntfQuerier IpAddress,
utsIgmpIntfGrpMembInterval INTEGER,
utsIgmpIntfLastMembQueryIntvl INTEGER,
utsIgmpIntfQueryInterval INTEGER,
utsIgmpIntfQueryMaxRespTime INTEGER,
utsIgmpIntfRobustness INTEGER,
utsIgmpIntfStartupQueryIntval INTEGER,
utsIgmpIntfUnsolictReportIntval INTEGER,
utsIgmpIntfGroups INTEGER,
utsIgmpIntfProxyStatus INTEGER
-- Deleted by Zhaoxf Dec 10, 2006
-- utsIgmpIntfStatus RowStatus
}
utsIgmpIntfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which IGMP is enabled."
::= { utsIgmpInterfaceEntry 1 }
utsIgmpIntfVersion OBJECT-TYPE
SYNTAX INTEGER
{
disable-igmp(0),
version2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of IGMP which is running on this interface.
This object can be used to configure a router capable of
running either value. For IGMP to function correctly, all
routers on a LAN must be configured to run the same version
of IGMP on that LAN."
DEFVAL { 2 }
::= { utsIgmpInterfaceEntry 2 }
utsIgmpIntfQuerier OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the IGMP Querier on the IP subnet to which
this interface is attached."
::= { utsIgmpInterfaceEntry 3 }
utsIgmpIntfGrpMembInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Group Membership Interval is the amount of time that
must pass before a multicast router decides there are no
more members of a group on a network. This value MUST be
((the Robustness Variable) times (the Query Interval))
plus (one Query Response Interval)."
::= { utsIgmpInterfaceEntry 4 }
utsIgmpIntfLastMembQueryIntvl OBJECT-TYPE
SYNTAX INTEGER (1..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages. This value may be tuned to
modify the leave latency of the network. A reduced value
results in reduced time to detect the loss of the last
member of a group. The value of this object is irrelevant
if igmpInterfaceVersion is 1."
DEFVAL { 1 }
::= { utsIgmpInterfaceEntry 5 }
utsIgmpIntfQueryInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which IGMP Host-Query packets are
transmitted on this interface."
DEFVAL { 125 }
::= { utsIgmpInterfaceEntry 6 }
utsIgmpIntfQueryMaxRespTime OBJECT-TYPE
SYNTAX INTEGER (10..25)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised in IGMPv2
queries on this interface."
DEFVAL { 10 }
::= { utsIgmpInterfaceEntry 7 }
utsIgmpIntfRobustness OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses."
DEFVAL { 2 }
::= { utsIgmpInterfaceEntry 8 }
utsIgmpIntfStartupQueryIntval OBJECT-TYPE
SYNTAX INTEGER (10..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the interval between General Queries sent by a Querier
on startup. Default: 1/4 the Query Interval."
DEFVAL { 32 }
::= { utsIgmpInterfaceEntry 9 }
utsIgmpIntfUnsolictReportIntval OBJECT-TYPE
SYNTAX INTEGER (10..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Unsolicited Report Interval is the time between
repetitions of a host's initial report of membership
in a group. Default: 10 seconds."
DEFVAL { 10 }
::= { utsIgmpInterfaceEntry 10 }
utsIgmpIntfGroups OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of entries for this interface in the
Cache Table."
::= { utsIgmpInterfaceEntry 11 }
utsIgmpIntfProxyStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable igmp proxy on this interface"
::= { utsIgmpInterfaceEntry 12 }
-- Deleted by zhaoxf Dec 11, 2006
-- utsIgmpIntfStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The activation of a row enables IGMP on the interface. The
-- destruction of a row disables IGMP on the interface."
-- ::= { utsIgmpInterfaceEntry 13 }
--
-- The IGMP Cache Table
--
utsIgmpCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIgmpCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which there are members on a particular interface."
::= { utsIgmpMIBObjects 2 }
utsIgmpCacheEntry OBJECT-TYPE
SYNTAX UtsIgmpCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the igmpCacheTable."
INDEX { utsIgmpCacheIfIndex, utsIgmpCacheGroupAddress }
::= { utsIgmpCacheTable 1 }
UtsIgmpCacheEntry ::= SEQUENCE {
utsIgmpCacheIfIndex InterfaceIndex,
utsIgmpCacheGroupAddress IpAddress,
utsIgmpCacheType INTEGER,
utsIgmpCacheLastReporter IpAddress,
utsIgmpCacheExpiryTime TimeTicks,
utsIgmpCacheStatus RowStatus
}
utsIgmpCacheIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex for which this entry contains information for an IP multicast group address."
::= { utsIgmpCacheEntry 1 }
utsIgmpCacheGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry contains information."
::= { utsIgmpCacheEntry 2 }
utsIgmpCacheType OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of whether the local system is a member of this group address on this interface."
::= { utsIgmpCacheEntry 3 }
utsIgmpCacheLastReporter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the source of the last membership report
received for this IP Multicast group address on this
interface. If no membership report has been received, this
object has the value 0.0.0.0."
::= { utsIgmpCacheEntry 4 }
utsIgmpCacheExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out. A value of 0 indicates that the entry is only
present because igmpCacheSelf is true and that if the router
left the group, this entry would be aged out immediately.
Note that some implementations may process membership
reports from the local system in the same way as reports
from other hosts, so a value of 0 is not required."
::= { utsIgmpCacheEntry 5 }
utsIgmpCacheStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry."
::= { utsIgmpCacheEntry 6 }
--
-- The IGMP Snooping Table
--
utsIgmpSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsIgmpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Snooping Table."
::= { utsIgmpMIBObjects 3 }
utsIgmpSnoopingEntry OBJECT-TYPE
SYNTAX UtsIgmpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the igmp snooping table."
INDEX { utsIgmpSnoopingVID, utsIgmpSnoopingGroupAddress }
::= { utsIgmpSnoopingTable 1 }
UtsIgmpSnoopingEntry ::= SEQUENCE {
utsIgmpSnoopingVID INTEGER,
utsIgmpSnoopingGroupAddress IpAddress,
utsIgmpSnoopingType INTEGER,
utsIgmpSnoopingExpiryTime TimeTicks,
utsIgmpSnoopingEgressPortList OCTET STRING,
utsIgmpSnoopingRowStatus RowStatus
}
utsIgmpSnoopingVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID in the igmp snooping table."
::= { utsIgmpSnoopingEntry 1 }
utsIgmpSnoopingGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry contains information."
::= { utsIgmpSnoopingEntry 2 }
utsIgmpSnoopingType OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of whether the local system is a member of this group address on this interface."
::= { utsIgmpSnoopingEntry 3 }
utsIgmpSnoopingExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiry time, when snooping type is static, the expirey time should be display never."
::= { utsIgmpSnoopingEntry 4 }
utsIgmpSnoopingEgressPortList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the second octet specifying
ports 9 through 16, etc. Within each octet, the most significant bit
represents the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port of the bridge
is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
::= { utsIgmpSnoopingEntry 5 }
utsIgmpSnoopingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry."
::= { utsIgmpSnoopingEntry 6 }
-------------------------------------------------------------------------------
------
------ PON's mib objects extension
------
--
-- EPON interface extension
--
utsEponConfExtObjects OBJECT IDENTIFIER ::= { utsEfmPonConfExt 1 }
------
------ 1. OLT
------
utsDot3OltMIB OBJECT IDENTIFIER ::= { utsEponConfExtObjects 1}
utsDot3OltObjects OBJECT IDENTIFIER ::= { utsDot3OltMIB 1}
utsDot3OltTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OLT MIBs."
::= { utsDot3OltObjects 1 }
utsDot3OltEntry OBJECT-TYPE
SYNTAX UtsDot3OltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 PLT MIBs table."
INDEX { ifIndex }
::= { utsDot3OltTable 1 }
UtsDot3OltEntry ::=
SEQUENCE {
utsDot3OltModuleId INTEGER,
utsDot3OltPortId INTEGER,
utsDot3OltOperStatus INTEGER,
utsDot3OltMACAddress MacAddress,
utsDot3OltMaxLLID INTEGER,
utsDot3OltMACAddressAgingTime INTEGER,
utsDot3OltARPPON2CNI TruthValue,
utsDot3OltARPCNI2PON TruthValue,
utsDot3OltIGMPSnooping TruthValue,
utsDot3OltIGMPTimeout INTEGER,
utsDot3OltVlanTagExchangeDnLinkPrefix INTEGER,
utsDot3OltVlanStackNestedModeVlanType INTEGER,
utsDot3OltMultiCopyBroadcastEnable TruthValue,
utsDot3OltDiscardUnlearnedAddress TruthValue,
utsDot3OltHwVersion DisplayString,
utsDot3OltFwVersion DisplayString,
utsDot3OltTransceiverType INTEGER,
utsDot3OltAdminStatus INTEGER,
utsDot3OltTransceiverVendor INTEGER,
utsDot3OltRegisteredONUCount INTEGER,
utsDot3OltOamLimit INTEGER,
-- utsDot3OltAction INTEGER
utsDot3OltRunningMode INTEGER
}
utsDot3OltModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3OltEntry 1 }
utsDot3OltPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt port index"
::= { utsDot3OltEntry 2 }
utsDot3OltOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
-- ,testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the operational state of the Multi-
Point MAC Control sublayer as defined in [802.3ah] clause 64. When this
attribute has the enumeration 'unregistered' the interface may be used
for registering a link partner. When this attribute has the enumeration
'registering' the interface is in the process of registering a link-
partner. When this attribute has the enumeration 'registered' the
interface has an established link-partner. It's identical to
dot3MpcpRegistrationState in Dot3MpcpEntry."
REFERENCE "[802.3ah], 30.3.5.1.7."
::= { utsDot3OltEntry 3 }
utsDot3OltMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the source_address parameter of OLT"
REFERENCE "[802.3ah], 30.3.5.1.6."
::= { utsDot3OltEntry 4 }
utsDot3OltMaxLLID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of supported LLID."
::= { utsDot3OltEntry 5 }
utsDot3OltMACAddressAgingTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time after which a MAC address will be removed from OLT address table,
measured in milliseconds. 0-86400000."
::= { utsDot3OltEntry 6 }
utsDot3OltARPPON2CNI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable ARP from PON port to CNI port. Fixed value = true"
::= { utsDot3OltEntry 8 }
utsDot3OltARPCNI2PON OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable ARP from CNI port to PON port. Fixed value = true."
::= { utsDot3OltEntry 9 }
utsDot3OltIGMPSnooping OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enable/disable IGMP Snooping function on the olt pon port"
::= { utsDot3OltEntry 10 }
utsDot3OltIGMPTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remove a group address from the ONU IGMP filter table according
to membership message timeout, measureded in seconds. 16-bit value."
::= { utsDot3OltEntry 11 }
utsDot3OltVlanTagExchangeDnLinkPrefix OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN tag prefix for VLAN exchange handling of downlink traffic.
8-bit value."
::= { utsDot3OltEntry 12 }
utsDot3OltVlanStackNestedModeVlanType OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nested VLAN type. This is the only non-common (0x8100 or
0x9100) value Set LLID VLAN configuration can configure for
nested mode VLAN type for stacked VLAN of any LLID. It will
be used for a ONU only if stack handling mode is selected and
utsDot3OnuVlanStackNestedMode is TRUE and utsDot3OnuVlanStackNestedModeVlanType
is vlanTypeOther. Return fixed value 33024 (0x8100)."
::= { utsDot3OltEntry 13 }
utsDot3OltMultiCopyBroadcastEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enabling / disabling this option determines the ability
to support multiple LLIDs VLANs. Return fixed value 'false'."
::= { utsDot3OltEntry 14 }
utsDot3OltDiscardUnlearnedAddress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward / discard any frame received from unlearned source
address when originating ONU entries limit inside address table
is reached. Fixed value = true."
::= { utsDot3OltEntry 15 }
utsDot3OltHwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version of OLT. Returns default value M3."
::= { utsDot3OltEntry 16 }
utsDot3OltFwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware version of OLT."
::= { utsDot3OltEntry 17 }
utsDot3OltTransceiverType OBJECT-TYPE
SYNTAX INTEGER {
null(1),
sff(3),
sfp(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"transceiver type for the following transceiver table."
::= { utsDot3OltEntry 18 }
utsDot3OltAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2), --
testing(3) -- in some test mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the OLT module. The
testing(3) state indicates that no operational
packets can be passed, current olt do not support testing mode."
::= { utsDot3OltEntry 19}
utsDot3OltTransceiverVendor OBJECT-TYPE
SYNTAX INTEGER {
zenko(1),
zonu(2),
infineon(3),
fiberxon(4),
ezconn(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"transceiver vendor for the following transceiver table.
Returns fixed value fiberxon(4)."
::= { utsDot3OltEntry 20 }
utsDot3OltRegisteredONUCount OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Registered ONU number."
::= { utsDot3OltEntry 21 }
utsDot3OltOamLimit OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the oam configuration for rate limit."
DEFVAL { disable }
::= { utsDot3OltEntry 22 }
--Added by tomsong 2006-06-22, move the configuration of running mode to PON port.
utsDot3OltRunningMode OBJECT-TYPE
SYNTAX INTEGER
{
isp-service-tag-handling-mode(1),
application-tag-handling-mode(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Application tag handling mode: this mode is also called transparent mode, which means OLT
will not do any tag manipulation and ONU is not associated
to any specific tag. Traffic behind ONU can be either tagged
or untagged depending upon applications. Internally OLT is
in a transparent mode.
ISP service tag handling mode: this mode is used to assign ISP service tag(s) to multiple
ONUs so traffic belonging to a specific ISP can be forwarded
directly according to the ISP service tag. Traffic behind
ONU is always untagged. Internally OLT is in a stacked but
not nested mode.
"
::= { utsDot3OltEntry 23 }
utsDot3Olt2Objects OBJECT IDENTIFIER ::= { utsDot3OltMIB 3}
-- EPM04B PON module configurations
utsDot3Olt2Table OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 MIBs."
::= { utsDot3Olt2Objects 1 }
utsDot3Olt2Entry OBJECT-TYPE
SYNTAX UtsDot3Olt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 MIBs table."
INDEX { utsDot3Olt2ModuleId, utsDot3Olt2DeviceId}
::= { utsDot3Olt2Table 1 }
UtsDot3Olt2Entry ::=
SEQUENCE {
utsDot3Olt2ModuleId INTEGER,
utsDot3Olt2DeviceId INTEGER,
utsDot3Olt2Status INTEGER,
utsDot3Olt2MACAddress MacAddress,
-- utsDot3OltMACAddressAgingTime INTEGER,
utsDot3OltPortIsolation INTEGER,
utsDot3OltDot1adEnable TruthValue,
-- utsDot3OltDot1adTPID INTEGER,
utsDot3OltDot1xMode INTEGER,
utsDot3OltMPCPTimeout INTEGER,
utsDot3OltNNIFlowControlTxEnable TruthValue,
utsDot3OltNNIFlowControlRxEnable TruthValue,
utsDot3OltNNIFlowControlLowTreshold INTEGER,
utsDot3OltNNIFlowControlHighTreshold INTEGER,
utsDot3OltFDBClear INTEGER,
utsDot3OltEncryptionMode INTEGER,
utsDot3OltEncryptionRekeyTimer INTEGER
}
utsDot3Olt2ModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2Entry 1 }
utsDot3Olt2DeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2Entry 2 }
utsDot3Olt2Status OBJECT-TYPE
SYNTAX INTEGER
{
waitforImage(1), -- wait for image: only during ethernet boot
normal(2),
departure(3), -- graceful departure
timeout(4) -- keep-alive timed-out
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OLT device status"
::= { utsDot3Olt2Entry 3}
utsDot3Olt2MACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the source_address parameter of OLT"
REFERENCE "[802.3ah], 30.3.5.1.6."
::= { utsDot3Olt2Entry 4}
utsDot3OltPortIsolation OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OLT Port Isolation mode"
::= { utsDot3Olt2Entry 6}
utsDot3OltDot1adEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"whether to enable dot1ad"
::= { utsDot3Olt2Entry 7}
-- utsDot3OltDot1adTPID OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Tag protocol id, by default 0x88a8."
-- ::= { utsDot3Olt2Entry 8}
utsDot3OltDot1xMode OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1x authentication mode status."
::= { utsDot3Olt2Entry 9}
utsDot3OltMPCPTimeout OBJECT-TYPE
SYNTAX INTEGER(0..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPCP timeout: 0 means timeout disabled. Value range 0, 20..50."
::= { utsDot3Olt2Entry 10}
utsDot3OltNNIFlowControlTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on/off Tx-Flowcontrol functionality on NNI ports"
::= { utsDot3Olt2Entry 11}
utsDot3OltNNIFlowControlRxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on/off Rx-Flowcontrol functionality on NNI ports"
::= { utsDot3Olt2Entry 12}
utsDot3OltNNIFlowControlLowTreshold OBJECT-TYPE
SYNTAX INTEGER(0..100) -- shall be lower than High Thresold
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"buffer low threshold limit (0 to 100 percent) for NNI port flow control."
::= { utsDot3Olt2Entry 13}
utsDot3OltNNIFlowControlHighTreshold OBJECT-TYPE
SYNTAX INTEGER(0..100) -- shall be higher than High Thresold
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"buffer low threshold limit (0 to 100 percent) for NNI port flow control."
::= { utsDot3Olt2Entry 14}
utsDot3OltFDBClear OBJECT-TYPE
SYNTAX INTEGER
{
clearAll(1),
clearUnicast(2),
clearMulticast(3),
clearDynamic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear OLT FDB entries"
::= { utsDot3Olt2Entry 15}
utsDot3OltEncryptionMode OBJECT-TYPE
SYNTAX INTEGER
{
aes48(1),
-- aes32(2),
ctc-churning(3),
disable(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global-level encryption mode"
::= { utsDot3Olt2Entry 16}
utsDot3OltEncryptionRekeyTimer OBJECT-TYPE
SYNTAX INTEGER(0..640)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select rekeying timer value (in seconds), 0 means disable rekeying"
DEFVAL{10}
::= { utsDot3Olt2Entry 17}
-- EPM04B PON port configurations
utsDot3Olt2PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 port MIBs."
::= { utsDot3Olt2Objects 2 }
utsDot3Olt2PortEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 port MIBs table."
INDEX { utsDot3OltPortModuleId, utsDot3OltPortDeviceId, utsDot3OltPortPortId }
::= { utsDot3Olt2PortTable 1 }
UtsDot3Olt2PortEntry ::=
SEQUENCE {
utsDot3OltPortModuleId INTEGER,
utsDot3OltPortDeviceId INTEGER,
utsDot3OltPortPortId INTEGER,
utsDot3OltOperState INTEGER,
utsDot3OltAdminState INTEGER,
-- utsDot3OltMACAddress MacAddress,
-- utsDot3OltLPortNumber INTEGER,
-- utsDot3OltMACAddressAgingTime INTEGER,
utsDot3OltRegisteredOnuNum INTEGER,
utsDot3OltSyncTime INTEGER,
utsDot3OltLaserOnTime INTEGER,
utsDot3OltLaserOffTime INTEGER,
utsDot3OltTxFECEnable TruthValue,
utsDot3OltTransceiverTx INTEGER,
utsDot3OltTransceiverRx INTEGER,
-- utsDot3OltONUP2PEnable TruthValue,
utsDot3OltMPCPGateBackoffTime INTEGER,
-- utsDot3OltEncryptionMode INTEGER,
-- utsDot3OltEncryptionRekeyTimer INTEGER,
utsDot3OltP2pEnable TruthValue,
utsDot3OltOlpPort INTEGER,
-- utsDot3OltPonTrunckProtectionGroupId INTEGER,
utsDot3OltPortLoopbackDetection INTEGER,
utsDot3OltPortLoopbackDetectionControl INTEGER,
utsDot3OltPortTransmissionPower INTEGER,
utsDot3OltPortReceivingPower INTEGER,
utsDot3OltPortRealtimeMulticastTraffic INTEGER,
utsDot3OltPortSupplyVoltage INTEGER,
utsDot3OltPortCurrentBias INTEGER,
utsDot3OltPortCurrentTemperature INTEGER
}
utsDot3OltPortModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2PortEntry 1 }
utsDot3OltPortDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2PortEntry 2 }
utsDot3OltPortPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt port index"
::= { utsDot3Olt2PortEntry 3 }
utsDot3OltOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
-- ,testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the operational state of the Multi-
Point MAC Control sublayer as defined in [802.3ah] clause 64. When this
attribute has the enumeration 'unregistered' the interface may be used
for registering a link partner. When this attribute has the enumeration
'registering' the interface is in the process of registering a link-
partner. When this attribute has the enumeration 'registered' the
interface has an established link-partner. It's identical to
dot3MpcpRegistrationState in Dot3MpcpEntry."
REFERENCE "[802.3ah], 30.3.5.1.7."
::= { utsDot3Olt2PortEntry 4 }
utsDot3OltAdminState OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2) --
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the OLT module. The
testing(3) state indicates that no operational
packets can be passed, current olt do not support testing mode."
::= { utsDot3Olt2PortEntry 5}
utsDot3OltRegisteredOnuNum OBJECT-TYPE
SYNTAX INTEGER (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Registered ONU number."
::= { utsDot3Olt2PortEntry 10 }
utsDot3OltSyncTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PON port sync time."
::= { utsDot3Olt2PortEntry 11 }
utsDot3OltLaserOnTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser on time."
::= { utsDot3Olt2PortEntry 12 }
utsDot3OltLaserOffTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser off time."
::= { utsDot3Olt2PortEntry 13 }
utsDot3OltTxFECEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx FEC enable or disable."
::= { utsDot3Olt2PortEntry 14 }
utsDot3OltTransceiverTx OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transceiver Tx enable or disable."
::= { utsDot3Olt2PortEntry 15 }
utsDot3OltTransceiverRx OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transceiver Tx enable or disable."
::= { utsDot3Olt2PortEntry 16 }
utsDot3OltMPCPGateBackoffTime OBJECT-TYPE
SYNTAX INTEGER(0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set OLT CTC special MPCP registration mode and the MPCP gate delay time.
0: disable CTC special MPCP registration mode.
1..31: enable CTC special MPCP registration mode and set the MPCP gate
delay in multiples of cycle time (1-31)
"
::= { utsDot3Olt2PortEntry 18 }
utsDot3OltP2pEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable P2P"
::= { utsDot3Olt2PortEntry 21 }
utsDot3OltOlpPort OBJECT-TYPE
SYNTAX INTEGER(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Olp port number on OSW. 0 means disable
the Optiocal Line Protection function for this PON port."
::= { utsDot3Olt2PortEntry 22 }
--utsDot3OltPonTrunckProtectionGroupId OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"Pon Trunck Protection Group id, 0 means this port not in any group."
-- ::= { utsDot3Olt2PortEntry 23 }
utsDot3OltPortLoopbackDetection OBJECT-TYPE
SYNTAX INTEGER
{
disable(1), --default value
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch of loopback dectection for each olt port, the default value is disable."
::= { utsDot3Olt2PortEntry 24 }
utsDot3OltPortLoopbackDetectionControl OBJECT-TYPE
SYNTAX INTEGER
{
disable(1), --default value
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch of loopback dectection control for each olt port, the default value is disable.
In the disable status, if detect the loop, send the event only, otherwise, send the event and shut
down the onu"
::= { utsDot3Olt2PortEntry 26 }
utsDot3OltPortTransmissionPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmission power of OLT port."
::= { utsDot3Olt2PortEntry 27 }
utsDot3OltPortReceivingPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receiving power of OLT port."
::= { utsDot3Olt2PortEntry 28 }
utsDot3OltPortRealtimeMulticastTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The realtime multicast traffic of OLT port."
::= { utsDot3Olt2PortEntry 29 }
utsDot3OltPortSupplyVoltage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supply voltage of OLT port."
::= { utsDot3Olt2PortEntry 30 }
utsDot3OltPortCurrentBias OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current bias of OLT port."
::= { utsDot3Olt2PortEntry 31 }
utsDot3OltPortCurrentTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature of OLT port."
::= { utsDot3Olt2PortEntry 32 }
-- EPM04B PON QoS configurations
utsDot3Olt2QoSGlbTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2QoSGlbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 QoS MIBs."
::= { utsDot3Olt2Objects 3 }
utsDot3Olt2QoSGlbEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2QoSGlbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 QoS MIBs table."
INDEX { utsDot3OltQosModuleId,utsDot3OltQosDeviceId }
::= { utsDot3Olt2QoSGlbTable 1 }
UtsDot3Olt2QoSGlbEntry ::=
SEQUENCE {
utsDot3OltQosModuleId INTEGER,
utsDot3OltQosDeviceId INTEGER,
utsDot3OltQoSMode INTEGER,
utsDot3OltQoSL2OverheadInclude TruthValue,
utsDot3OltWREDEnable TruthValue,
utsDot3OltSchedulingMode INTEGER,
utsDot3OltSchedulingWeight OCTET STRING,
utsDot3OltDot1p2QueueMap OCTET STRING,
utsDot3OltDscp2QueueMap OCTET STRING,
utsDot3OltDefaultTx802Dot1pValue INTEGER,
utsDot3OltDefaultCosQueue INTEGER,
utsDot3OltTxDot1pRemark OCTET STRING,
utsDot3OltTxDscpRemark OCTET STRING
}
utsDot3OltQosModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2QoSGlbEntry 1 }
utsDot3OltQosDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2QoSGlbEntry 2 }
utsDot3OltQoSMode OBJECT-TYPE
SYNTAX INTEGER
{
modeDscp(1), -- use DSCP mode
mode8021p(2) -- use 802.1p mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets global DSCP/802.1p mode, to specify whether to use the DSCP value or
802.1p value for packet marking/queueing/classification."
::= { utsDot3Olt2QoSGlbEntry 3 }
utsDot3OltQoSL2OverheadInclude OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to include L2 overheads for spolicing/shaping rate."
::= { utsDot3Olt2QoSGlbEntry 4 }
utsDot3OltWREDEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable WRED globally."
::= { utsDot3Olt2QoSGlbEntry 5}
utsDot3OltSchedulingMode OBJECT-TYPE
SYNTAX INTEGER
{
sp(1), -- use strict priority
wrr(2), -- weighted-round-robin
hierarchical(3) -- hierarchical queueing, default
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the intra LLID/NNI port queue scheduler policy at the OLT. The same policy
applies to both upstream and downstream schedulers. The scheduling can be
either strict-priority, weighted-round-robin or hierarchical queueing. For
hierarchical queueing, queues 7 and 6 are in strict priority, and remaing queues
are in weighted-round-robin mode."
::= { utsDot3Olt2QoSGlbEntry 6 }
utsDot3OltSchedulingWeight OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- weight[queue index]: 0x01[0] 23[1] 45[2] 67[3] 89[4] ab[5] cd[6] ef[7]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the intra LLID/NNI port queue scheduler policy of weighted round robin, weights from 1 to
255 can be selected for each of the 8 queues."
::= { utsDot3Olt2QoSGlbEntry 7 }
utsDot3OltDot1p2QueueMap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- queue[dot1p value]: 0x01[0] 23[1] 45[2] 67[3] 89[4] ab[5] cd[6] ef[7]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1p-to-output queue mapping table (3bits to 3bits) at the OLT. The
table specifies one of 8 possible CoS queues per NNI/LLID port.
Queue number(from 0-7)for 802.1p value 0 to 7"
::= { utsDot3Olt2QoSGlbEntry 8 }
utsDot3OltDscp2QueueMap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- queue[DSCP value]: 0x01[0] 23[1] 45[2] 67[3] 89[4] ab[5] cd[6] ef[7]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DSCP-to-output queue mapping table (3bits to 3bits) at the OLT. The
three most significant bits of the packet's DSCP value is used for the mapping.
The table therefore maps the packet's DSCP[0:2] value to one of eight possible
CoS queues.
Queue number(0-7)for dscp[0:2] values."
::= { utsDot3Olt2QoSGlbEntry 9 }
utsDot3OltDefaultTx802Dot1pValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default Tx 802.1p value for VLAN tag."
::= { utsDot3Olt2QoSGlbEntry 10 }
utsDot3OltDefaultCosQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default CoS queue(0 to 7) for queueing untagged
packets in 802.1p QoS mode or non-IP packets in
DSCP QoS mode.
"
::= { utsDot3Olt2QoSGlbEntry 11 }
utsDot3OltTxDot1pRemark OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- If policing mark-bit=1, this specifies the
-- remarking table from input 802.1p value to output 802.1p value
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1p remarking table, when a packet is to be re-marked as a result of
tokenbucket policing. This table takes the three bits of the original 802.1p
value and one mark bit from the tokenbucket policing logic and specifies
the new three-bit 802.1p value to be written in the outgoing packet header.
This table applies globally, to any packet-remarking for both upstream and downstream
directions at the OLT.
"
::= { utsDot3Olt2QoSGlbEntry 12 }
utsDot3OltTxDscpRemark OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(64)) -- if policing mark-bit=1, this specifies the remarking
-- table from input DSCP value to the 6-bit output
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DSCP remarking table, when a packet is to be re-marked as a result of tokenbucket
policing. This table takes the six bits of the original DSCP value and and specifies the
new six-bit DSCP value to be written in the outgoing packet header, if the packet is to
be marked as a result of policing. This table applies globally, to any packet-remarking
for both upstream and downstream directions at the OLT.
"
::= { utsDot3Olt2QoSGlbEntry 13 }
-- DBA
utsDot3Olt2DbaGlbTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2DbaGlbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 DBA MIBs."
::= { utsDot3Olt2Objects 4 }
utsDot3Olt2DbaGlbEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2DbaGlbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 DBA MIBs table."
INDEX { utsDot3OltDbaGlbModuleId,utsDot3OltDbaGlbDeviceId}
::= { utsDot3Olt2DbaGlbTable 1 }
UtsDot3Olt2DbaGlbEntry ::=
SEQUENCE {
utsDot3OltDbaGlbModuleId INTEGER,
utsDot3OltDbaGlbDeviceId INTEGER,
utsDot3OltDbaMode INTEGER,
utsDot3OltDbaAlgorithm INTEGER
}
utsDot3OltDbaGlbModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2DbaGlbEntry 1 }
utsDot3OltDbaGlbDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2DbaGlbEntry 2 }
utsDot3OltDbaMode OBJECT-TYPE
SYNTAX INTEGER
{
hardware-dba(1), -- use hardware DBA
software-dba(2), -- use software dynamic DBA
hardware-dynamic-dba(3) -- use hardwareDBA with dynamic cycletime tuning
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DBA mode, to specify whether to use hardware-based DBA or software based DBA.
The DBA mode is global, and the same mode is used for all EPONS of the OLT."
::= { utsDot3Olt2DbaGlbEntry 3 }
utsDot3OltDbaAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
max-min(1), --
ceilingmax-min(2), --
fixedmin(3) --
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DBA algorithm options for upstream bandwidth allocation among ONUs."
::= { utsDot3Olt2DbaGlbEntry 4 }
-- EPON OLT Broadcast/Unknown Unicast/Unknown Multicast Policing
utsDot3Olt2PolicingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2PolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 policing MIBs."
::= { utsDot3Olt2Objects 7 }
utsDot3Olt2PolicingEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2PolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 policing MIBs table."
INDEX {utsDot3OltPolicingModuleId, utsDot3OltPolicingDeviceId}
::= { utsDot3Olt2PolicingTable 1 }
UtsDot3Olt2PolicingEntry ::=
SEQUENCE {
utsDot3OltPolicingModuleId INTEGER,
utsDot3OltPolicingDeviceId INTEGER,
utsDot3OltBcPoliceEnable TruthValue,
utsDot3OltBcPoliceRate INTEGER,
utsDot3OltBcPoliceBurstSize INTEGER,
utsDot3OltUmcPoliceEnable TruthValue,
utsDot3OltUmcPoliceRate INTEGER,
utsDot3OltUmcPoliceBurstSize INTEGER,
utsDot3OltUucPoliceEnable TruthValue,
utsDot3OltUucPoliceRate INTEGER,
utsDot3OltUucPoliceBurstSize INTEGER
}
utsDot3OltPolicingModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2PolicingEntry 1 }
utsDot3OltPolicingDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2PolicingEntry 2 }
utsDot3OltBcPoliceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable broadcast policing"
::= { utsDot3Olt2PolicingEntry 3 }
utsDot3OltBcPoliceRate OBJECT-TYPE
SYNTAX INTEGER -- in Kbps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"broadcast policing rate (in Kbps)"
::= { utsDot3Olt2PolicingEntry 4 }
utsDot3OltBcPoliceBurstSize OBJECT-TYPE
SYNTAX INTEGER -- in KB
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"broadcast policing burst size (in KB)"
::= { utsDot3Olt2PolicingEntry 5 }
utsDot3OltUmcPoliceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable unknown multicast policing"
::= { utsDot3Olt2PolicingEntry 6 }
utsDot3OltUmcPoliceRate OBJECT-TYPE
SYNTAX INTEGER -- in Kbps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"unknown multicast policing rate (in Kbps)"
::= { utsDot3Olt2PolicingEntry 7 }
utsDot3OltUmcPoliceBurstSize OBJECT-TYPE
SYNTAX INTEGER -- in KB
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"unknown multicast policing burst size (in KB)"
::= { utsDot3Olt2PolicingEntry 8 }
utsDot3OltUucPoliceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable unknown unicast policing"
::= { utsDot3Olt2PolicingEntry 9 }
utsDot3OltUucPoliceRate OBJECT-TYPE
SYNTAX INTEGER -- in Kbps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"unknown unicast policing rate (in Kbps)"
::= { utsDot3Olt2PolicingEntry 10 }
utsDot3OltUucPoliceBurstSize OBJECT-TYPE
SYNTAX INTEGER -- in KB
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"unknown unicast policing burst size (in KB)"
::= { utsDot3Olt2PolicingEntry 11 }
-- EPON OLT VLAN stacking function
utsDot3Olt2VlanStackingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2VlanStackingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 VLAN stacking MIBs."
::= { utsDot3Olt2Objects 8 }
utsDot3Olt2VlanStackingEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2VlanStackingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 VLAN stacking MIBs table."
INDEX {utsDot3OltVlanStackingModuleId, utsDot3OltVlanStackingDeviceId,
utsDot3OltVlanStackingPortId,utsDot3Olt2VlanStackingLogicalPortId,
utsDot3Olt2VlanStackingCVlanId}
::= { utsDot3Olt2VlanStackingTable 1 }
UtsDot3Olt2VlanStackingEntry ::=
SEQUENCE {
utsDot3OltVlanStackingModuleId INTEGER,
utsDot3OltVlanStackingDeviceId INTEGER,
utsDot3OltVlanStackingPortId INTEGER,
utsDot3Olt2VlanStackingLogicalPortId INTEGER,
utsDot3Olt2VlanStackingCVlanId INTEGER,
utsDot3Olt2VlanStackingSVlanId INTEGER,
utsDot3Olt2VlanStackingPriMode INTEGER,
utsDot3Olt2VlanStackingSVlanPri INTEGER,
utsDot3Olt2VlanStackingRowStatus RowStatus
}
utsDot3OltVlanStackingModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2VlanStackingEntry 1 }
utsDot3OltVlanStackingDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2VlanStackingEntry 2 }
utsDot3OltVlanStackingPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OLT PON port ID"
::= { utsDot3Olt2VlanStackingEntry 3 }
utsDot3Olt2VlanStackingLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical port ID"
::= { utsDot3Olt2VlanStackingEntry 4 }
utsDot3Olt2VlanStackingCVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CVLAN ID"
::= { utsDot3Olt2VlanStackingEntry 5 }
utsDot3Olt2VlanStackingSVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SVLAN ID"
::= { utsDot3Olt2VlanStackingEntry 6 }
utsDot3Olt2VlanStackingPriMode OBJECT-TYPE
SYNTAX INTEGER
{
copy(1), -- copy internal priority to out priority
zero(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SVLAN ID"
::= { utsDot3Olt2VlanStackingEntry 7 }
utsDot3Olt2VlanStackingSVlanPri OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SVLAN priority"
::= { utsDot3Olt2VlanStackingEntry 8 }
utsDot3Olt2VlanStackingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status"
::= { utsDot3Olt2VlanStackingEntry 9 }
-- EPM04B PON static FDB configurations
utsDot3Olt2StaticFDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2StaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 port MIBs."
::= { utsDot3Olt2Objects 9 }
utsDot3Olt2StaticFDBEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2StaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 port MIBs table."
INDEX { utsDot3OltStaticFDBModuleId, utsDot3OltStaticFDBDeviceId }
::= { utsDot3Olt2StaticFDBTable 1 }
UtsDot3Olt2StaticFDBEntry ::=
SEQUENCE {
utsDot3OltStaticFDBModuleId INTEGER,
utsDot3OltStaticFDBDeviceId INTEGER,
utsDot3OltStaticFDBDstMacAddr MacAddress,
utsDot3OltStaticFDBVlanId INTEGER,
utsDot3OltStaticFDBEgressPort OCTET STRING,
utsDot3OltStaticFDBRowStatus RowStatus
}
utsDot3OltStaticFDBModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module ID"
::= { utsDot3Olt2StaticFDBEntry 1 }
utsDot3OltStaticFDBDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device ID"
::= { utsDot3Olt2StaticFDBEntry 2 }
utsDot3OltStaticFDBDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address"
::= { utsDot3Olt2StaticFDBEntry 3 }
utsDot3OltStaticFDBVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID"
::= { utsDot3Olt2StaticFDBEntry 4 }
utsDot3OltStaticFDBEgressPort OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- from left to right, 0B1011... means port 1,3,4s
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Egress port map"
::= { utsDot3Olt2StaticFDBEntry 5 }
utsDot3OltStaticFDBRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsDot3Olt2StaticFDBEntry 6 }
-- Display FDB table
-- EPM04B PON static FDB configurations
utsDot3Olt2FDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2FDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 port MIBs."
::= { utsDot3Olt2Objects 10 }
utsDot3Olt2FDBEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2FDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 port MIBs table."
INDEX { utsDot3OltFDBModuleId, utsDot3OltFDBDeviceId, utsDot3OltFDBIndex }
::= { utsDot3Olt2FDBTable 1 }
UtsDot3Olt2FDBEntry ::=
SEQUENCE {
utsDot3OltFDBModuleId INTEGER,
utsDot3OltFDBDeviceId INTEGER,
utsDot3OltFDBIndex INTEGER,
utsDot3OltFDBDstMacAddr MacAddress,
utsDot3OltFDBVlanId INTEGER,
utsDot3OltFDBEgressPort OCTET STRING,
utsDot3OltFDBStatus INTEGER
}
utsDot3OltFDBModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module ID"
::= { utsDot3Olt2FDBEntry 1 }
utsDot3OltFDBDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device ID"
::= { utsDot3Olt2FDBEntry 2 }
utsDot3OltFDBIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device ID"
::= { utsDot3Olt2FDBEntry 3 }
utsDot3OltFDBDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination MAC address"
::= { utsDot3Olt2FDBEntry 4 }
utsDot3OltFDBVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID"
::= { utsDot3Olt2FDBEntry 5 }
utsDot3OltFDBEgressPort OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- from left to right, 0B1011... means port 1,3,4s
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress port map"
::= { utsDot3Olt2FDBEntry 6 }
utsDot3OltFDBStatus OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1), -- the entry is no longer valid but not flushed yet
dynamic(2), -- dynamically learned
local(3), -- local port MAC address
static(4), -- statically added
igmpSnooping(5) -- via IGMP snooping
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress port map"
::= { utsDot3Olt2FDBEntry 7 }
-- PON port DBA
utsDot3Olt2PortDbaTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2PortDbaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 PON port DBA MIBs."
::= { utsDot3Olt2Objects 11 }
utsDot3Olt2PortDbaEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2PortDbaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 PON port DBA MIBs table."
INDEX { utsDot3OltPortDbaModuleId,utsDot3OltPortDbaDeviceId, utsDot3OltPortDbaPortId}
::= { utsDot3Olt2PortDbaTable 1 }
UtsDot3Olt2PortDbaEntry ::=
SEQUENCE {
utsDot3OltPortDbaModuleId INTEGER,
utsDot3OltPortDbaDeviceId INTEGER,
utsDot3OltPortDbaPortId INTEGER,
utsDot3OltPortDbaCycleSize INTEGER,
utsDot3OltPortDbaDiscoveryFreq INTEGER,
utsDot3OltPortDbaDiscoverySize INTEGER
}
utsDot3OltPortDbaModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2PortDbaEntry 1 }
utsDot3OltPortDbaDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2PortDbaEntry 2 }
utsDot3OltPortDbaPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt port index"
::= { utsDot3Olt2PortDbaEntry 3 }
utsDot3OltPortDbaCycleSize OBJECT-TYPE
SYNTAX INTEGER(12500..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DBA cycle time in TQ for HW DBA and SW DBA"
DEFVAL{125000}
::= { utsDot3Olt2PortDbaEntry 4 }
utsDot3OltPortDbaDiscoveryFreq OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DBA discovery frequency"
DEFVAL{64}
::= { utsDot3Olt2PortDbaEntry 5 }
utsDot3OltPortDbaDiscoverySize OBJECT-TYPE
SYNTAX INTEGER(1024..14000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DBA discovery size in TQ"
DEFVAL{14000}
::= { utsDot3Olt2PortDbaEntry 6 }
--
-- PON protection
--
utsDot3Olt2PonProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsPonTrunckProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Pon Trunck Protection Table, for the phase I, the port 1 and port 2 must be in the same module, and
the id of port 1 and port 2 must be 1&2 or 3&4."
::= { utsDot3Olt2Objects 12 }
utsPonTrunckProtectionEntry OBJECT-TYPE
SYNTAX UtsPonTrunckProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Pon Protection table for Pon Trunck Protection interface."
INDEX { utsPonTrunckProtectionGroupId }
::= { utsDot3Olt2PonProtectionTable 1 }
UtsPonTrunckProtectionEntry ::=
SEQUENCE {
utsPonTrunckProtectionGroupId INTEGER,
utsPonTrunckProtectionName DisplayString,
utsPonTrunckProtectionPort1ModuleId INTEGER,
utsPonTrunckProtectionPort1DeviceId INTEGER,
utsPonTrunckProtectionPort1PortId INTEGER,
utsPonTrunckProtectionPort2ModuleId INTEGER,
utsPonTrunckProtectionPort2DeviceId INTEGER,
utsPonTrunckProtectionPort2PortId INTEGER,
utsPonTrunckProtectionPort1Status INTEGER,
utsPonTrunckProtectionPort2Status INTEGER,
utsPonTrunckProtectionPortSwitchOver INTEGER,
utsPonTrunckProtectionPortSwitchOverResult INTEGER,
utsPonTrunckProtectionRowStatus RowStatus
}
utsPonTrunckProtectionGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of what Pon Trunck Protection group index is running."
::= { utsPonTrunckProtectionEntry 1 }
utsPonTrunckProtectionName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the name of the Pon Trunck Protection group."
::= { utsPonTrunckProtectionEntry 2 }
utsPonTrunckProtectionPort1ModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Port 1 Module ID."
::= { utsPonTrunckProtectionEntry 3 }
utsPonTrunckProtectionPort1DeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Port 1 Device ID."
::= { utsPonTrunckProtectionEntry 4 }
utsPonTrunckProtectionPort1PortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Port 1 Port ID."
::= { utsPonTrunckProtectionEntry 5 }
utsPonTrunckProtectionPort2ModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Port 2 Module ID."
::= { utsPonTrunckProtectionEntry 6 }
utsPonTrunckProtectionPort2DeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Port 2 Device ID."
::= { utsPonTrunckProtectionEntry 7 }
utsPonTrunckProtectionPort2PortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Port 2 Port ID."
::= { utsPonTrunckProtectionEntry 8 }
utsPonTrunckProtectionPort1Status OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Port 1."
::= { utsPonTrunckProtectionEntry 9 }
utsPonTrunckProtectionPort2Status OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Port 2."
::= { utsPonTrunckProtectionEntry 10 }
utsPonTrunckProtectionPortSwitchOver OBJECT-TYPE
SYNTAX INTEGER
{
switchover(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch over for this group."
::= { utsPonTrunckProtectionEntry 11 }
utsPonTrunckProtectionPortSwitchOverResult OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
executing(2),
success(3),
fail(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of switch over."
::= { utsPonTrunckProtectionEntry 12 }
utsPonTrunckProtectionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsPonTrunckProtectionEntry 15 }
-- the utsPonVlanTranslationTable table
-- implemented by PON chip
-- Vlan
utsPonVlanTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsPonVlanTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan Translaiton Table for PON side."
::= { utsDot3Olt2Objects 15 }
utsPonVlanTranslationEntry OBJECT-TYPE
SYNTAX UtsPonVlanTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vlan translation table for Pon interface."
INDEX { utsPonVlanTranslationModuleID, utsPonVlanTranslationDeviceID, utsPonVlanTranslationPortID, utsPonVlanTranslationLogicPortID, utsPonVlanTranslationOldVID, utsPonVlanTranslationOldCos}
::= { utsPonVlanTranslationTable 1 }
UtsPonVlanTranslationEntry ::=
SEQUENCE {
utsPonVlanTranslationModuleID INTEGER,
utsPonVlanTranslationDeviceID INTEGER,
utsPonVlanTranslationPortID INTEGER,
utsPonVlanTranslationLogicPortID INTEGER,
utsPonVlanTranslationOldVID INTEGER,
utsPonVlanTranslationOldCos INTEGER,
utsPonVlanTranslationNewVID INTEGER,
utsPonVlanTranslationNewCos INTEGER,
utsPonVlanTranslationRowStatus RowStatus
}
utsPonVlanTranslationModuleID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of module id."
::= { utsPonVlanTranslationEntry 1 }
utsPonVlanTranslationDeviceID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of device id."
::= { utsPonVlanTranslationEntry 2 }
utsPonVlanTranslationPortID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of olt port id."
::= { utsPonVlanTranslationEntry 3 }
utsPonVlanTranslationLogicPortID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of olt onu id."
::= { utsPonVlanTranslationEntry 4 }
utsPonVlanTranslationOldVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of pre-translation vlan id, the value shoud be from 0 to 4095, 4095 means do not care this value."
::= { utsPonVlanTranslationEntry 5 }
utsPonVlanTranslationOldCos OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The old cos,the range should be 0 to 8, 8 means do not care this value."
::= { utsPonVlanTranslationEntry 6 }
utsPonVlanTranslationNewVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of after-translation vlan id, the value shoud be from 0 to 4094."
::= { utsPonVlanTranslationEntry 7 }
utsPonVlanTranslationNewCos OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The new cos for N:1 translaiton, the value should be 0 to 7;when in 1:1 translation, this value should be set 8."
::= { utsPonVlanTranslationEntry 8 }
utsPonVlanTranslationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsPonVlanTranslationEntry 9 }
------
------
------
utsDot3OltTransceiverObjects OBJECT IDENTIFIER ::= { utsDot3OltMIB 2}
utsDot3OltTransceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OltTransceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OLT transceiver MIBs."
::= { utsDot3OltTransceiverObjects 1 }
utsDot3OltTransceiverEntry OBJECT-TYPE
SYNTAX UtsDot3OltTransceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 PLT MIBs table."
INDEX { utsDot3OltTransceiverIndex }
::= { utsDot3OltTransceiverTable 1 }
UtsDot3OltTransceiverEntry ::=
SEQUENCE {
utsDot3OltTransceiverIndex INTEGER,
utsDot3OltTransceiverPONPortLinkIndPolarity INTEGER,
utsDot3OltTransceiverAGCResetGateOffset INTEGER,
utsDot3OltTransceiverAGCResetDiscoveryOffset INTEGER,
utsDot3OltTransceiverAGCResetDuration INTEGER,
utsDot3OltTransceiverAGCResetPolarity INTEGER,
utsDot3OltTransceiverCDRResetGateOffset INTEGER,
utsDot3OltTransceiverCDRResetDiscoveryOffset INTEGER,
utsDot3OltTransceiverCDRResetDuration INTEGER,
utsDot3OltTransceiverCDRResetPolarity INTEGER,
utsDot3OltTransceiverEndGrantResetOffset INTEGER,
utsDot3OltTransceiverEndGrantResetDuration INTEGER,
utsDot3OltTransceiverEndGrantResetPolarity INTEGER,
utsDot3OltTransceiverDiscoveryRelockEnable TruthValue,
utsDot3OltTransceiverDiscoveryLaserRxLossPolarity INTEGER,
utsDot3OltTransceiverPONTxDisablePolarity INTEGER,
utsDot3OltTransceiverOpticsDeadZone INTEGER,
utsDot3OltTransceiverUseOpticsSignalLoss TruthValue,
utsDot3OltTransceiverAGCLockTime INTEGER,
utsDot3OltTransceiverCDRLockTime INTEGER
}
utsDot3OltTransceiverIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of tranceiver's table which is corresponding to the tranceiver type in olt table. "
::= { utsDot3OltTransceiverEntry 1 }
utsDot3OltTransceiverPONPortLinkIndPolarity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarity of the PON port link indication clock. 0 - Active low, 1 - Active high."
::= { utsDot3OltTransceiverEntry 2 }
utsDot3OltTransceiverAGCResetGateOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGC reset activation offset before normal grant CDR reset activation,
measured in 8 nanoseconds units. 12-bit value (0 - 4095)."
::= { utsDot3OltTransceiverEntry 3 }
utsDot3OltTransceiverAGCResetDiscoveryOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGC reset activation offset before discovery CDR reset activation,
measured in 8 nanoseconds units. 12-bit value (0 - 4095)."
::= { utsDot3OltTransceiverEntry 4 }
utsDot3OltTransceiverAGCResetDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGC reset pulse duration, measured
in 8 nanoseconds units. 3-bit value (0 - 7)."
::= { utsDot3OltTransceiverEntry 5 }
utsDot3OltTransceiverAGCResetPolarity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGC reset pulse polarity. 0 - Active low, 1 - Active high."
::= { utsDot3OltTransceiverEntry 6 }
utsDot3OltTransceiverCDRResetGateOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CDR reset activation offset before start of normal grant, measured in
8 nanoseconds units. 12-bit value (0 - 4095)."
::= { utsDot3OltTransceiverEntry 7 }
utsDot3OltTransceiverCDRResetDiscoveryOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CDR reset activation offset before start of discovery window,
measured in 8 nanoseconds units. 12-bit value (0 - 4095)."
::= { utsDot3OltTransceiverEntry 8 }
utsDot3OltTransceiverCDRResetDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CDR reset pulse duration, measured
in 8 nanoseconds units. 3-bit value (0 - 7)."
::= { utsDot3OltTransceiverEntry 9 }
utsDot3OltTransceiverCDRResetPolarity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGC reset pulse polarity. 0 - Active low, 1 - Active high."
::= { utsDot3OltTransceiverEntry 10 }
utsDot3OltTransceiverEndGrantResetOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"End of grant reset activation offset, measured in 8 nanoseconds units.
12-bit value (0 - 4095)."
::= { utsDot3OltTransceiverEntry 11 }
utsDot3OltTransceiverEndGrantResetDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"End of grant reset pulse duration, measured in 8 nanoseconds units.
3-bit value (0 - 7)."
::= { utsDot3OltTransceiverEntry 12 }
utsDot3OltTransceiverEndGrantResetPolarity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"End of grant reset pulse polarity. 0 - Active low, 1 - Active high."
::= { utsDot3OltTransceiverEntry 13 }
utsDot3OltTransceiverDiscoveryRelockEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable the Rx PHY re-locking mechanism during discovery window."
::= { utsDot3OltTransceiverEntry 14 }
utsDot3OltTransceiverDiscoveryLaserRxLossPolarity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser Rx loss signal polarity. 0 - Active low, 1 - Active high."
::= { utsDot3OltTransceiverEntry 15 }
utsDot3OltTransceiverPONTxDisablePolarity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PON optics transmission signal polarity. 0 - Active low, 1 - Active high."
::= { utsDot3OltTransceiverEntry 16 }
utsDot3OltTransceiverOpticsDeadZone OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimal length between the end of a grant to the start of the other,
measured in 8 nanoseconds units. 4-bit value (0 - 15)."
::= { utsDot3OltTransceiverEntry 17 }
utsDot3OltTransceiverUseOpticsSignalLoss OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Use the optics signal loss?signal by
the OLT line status state machine."
::= { utsDot3OltTransceiverEntry 18 }
utsDot3OltTransceiverAGCLockTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PON upstream data AGC lock time measured in TQ (in increments of 16ns)."
::= { utsDot3OltTransceiverEntry 19 }
utsDot3OltTransceiverCDRLockTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PON RX signal synchronization time measured in TQ. 16-bit value."
::= { utsDot3OltTransceiverEntry 20 }
------
------ 2. ONU
------
utsDot3OnuMIB OBJECT IDENTIFIER ::= { utsEponConfExtObjects 2}
utsDot3OnuObjects OBJECT IDENTIFIER ::= { utsDot3OnuMIB 1}
utsDot3OnuTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 1 }
utsDot3OnuEntry OBJECT-TYPE
SYNTAX UtsDot3OnuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { ifIndex }
::= { utsDot3OnuTable 1 }
UtsDot3OnuEntry ::=
SEQUENCE {
utsDot3OnuModuleId INTEGER,
utsDot3OnuPortId INTEGER,
utsDot3OnuLogicalPortId INTEGER,
utsDot3OnuRegistrationState INTEGER,
utsDot3OnuHwVersion DisplayString,
utsDot3OnuFwVersion DisplayString,
utsDot3OnuMaxLLID INTEGER,
utsDot3OnuOAMStandardVersion INTEGER,
utsDot3OnuRTT INTEGER,
utsDot3OnuHwType INTEGER,
utsDot3OnuSwitchHwRev DisplayString,
utsDot3OnuSwitchFwRev DisplayString,
utsDot3OnuIADStatus INTEGER,
utsDot3OnuPonMacAddress MacAddress,
utsDot3OnuAES128EncryptionStatus INTEGER,
utsDot3OnuAES128EncryptionKey OCTET STRING,
utsDot3OnuPonLoopbackTestStatus INTEGER,
utsDot3OnuPonLoopbackTestVlanId INTEGER,
utsDot3OnuEthernetLinkStatus INTEGER,
-- will take effect in node version 3.0
-- utsDot3OnuMaxPendingGrants INTEGER,
utsDot3OnuSwitchMacAddress MacAddress,
utsDot3OnuAdminStatus INTEGER,
utsDot3OnuMulticastFilter INTEGER,
utsDot3OnuRMAutoNegotiation INTEGER,
utsDot3OnuReset INTEGER,
utsDot3OnuQinQ INTEGER,
utsDot3OnuCATVStatus INTEGER
}
utsDot3OnuModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3OnuEntry 1 }
utsDot3OnuPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3OnuEntry 2 }
utsDot3OnuLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3OnuEntry 3 }
utsDot3OnuRegistrationState OBJECT-TYPE
SYNTAX INTEGER {
unregistered(1),
pending(2),
registered(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the operational state of the Multi-
Point MAC Control sublayer as defined in [802.3ah] clause 64. When this
attribute has the enumeration 'unregistered' the interface may be used
for registering a link partner. When this attribute has the enumeration
'registering' the interface is in the process of registering a link-
partner. When this attribute has the enumeration 'registered' the
interface has an established link-partner. It's identical to
dot3MpcpRegistrationState in Dot3MpcpEntry."
REFERENCE "[802.3ah], 30.3.5.1.7."
::= { utsDot3OnuEntry 4 }
utsDot3OnuHwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version of ONU PON component."
::= { utsDot3OnuEntry 5 }
utsDot3OnuFwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware version of ONU PON component."
::= { utsDot3OnuEntry 6 }
utsDot3OnuMaxLLID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of supported LLID."
::= { utsDot3OnuEntry 7 }
utsDot3OnuOAMStandardVersion OBJECT-TYPE
SYNTAX INTEGER {
oam-802-3ah-draft-1-2(1),
oam-802-3ah-draft-2-0(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU supports OAM standard according to 802.3ah draft 1.2 or 2.0.
Only support oam-802-3ah-draft-2-0(2)."
::= { utsDot3OnuEntry 8 }
utsDot3OnuRTT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round Trip Time in TQ unit."
::= { utsDot3OnuEntry 9 }
utsDot3OnuHwType OBJECT-TYPE
SYNTAX INTEGER
{
onu100(1),
onu1000B(2),
onu1000C(3),
onu200A(4),
onu200B(5),
onu2024(6),
onu2004(7),
onu101K(8),
onu301(9),
onu301C(10),
onu404(11),
onu404C(12),
onu804(13),
onu804C(14),
onu1001C(15),
onu3004(16),
onu1001i(17),
onu2004i(18),
onu404i(19),
clt2060(20),
onu204i(21),
onu208i(22),
onu204h(23),
onu408t(24),
onu2024i(25),
onub210(26),
onu1001h(27),
onub220(28),
onu804i(29),
onu101(30),
onu1001b(31),
onu2004h(32),
onu204d(33),
onu404t(34),
onu4024t(35),
onu4024i(36),
onu101i(38),
onub1205y(39),
onub1205d(40),
onub130(41),
tkOnu(100),
pmcOnu(101),
unknow(200)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU Hardware Type"
::= { utsDot3OnuEntry 10 }
utsDot3OnuSwitchHwRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version of ONU switch component."
::= { utsDot3OnuEntry 11 }
utsDot3OnuSwitchFwRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"firmware version of ONU switch component."
::= { utsDot3OnuEntry 12 }
utsDot3OnuIADStatus OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
unknown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether Onu switch component is ready for operation"
::= { utsDot3OnuEntry 13 }
utsDot3OnuPonMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU PON part mac address."
::= { utsDot3OnuEntry 14 }
-- Zhaoxf added on Dec 25 2005
utsDot3OnuAES128EncryptionStatus OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
bidirectional(2),
downlink(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AES encryption status for ONU"
::= { utsDot3OnuEntry 15 }
utsDot3OnuAES128EncryptionKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AES encryption key set for ONU. The NULL string will
restore it to default value."
::= { utsDot3OnuEntry 16 }
utsDot3OnuPonLoopbackTestStatus OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable PON loopback test"
::= { utsDot3OnuEntry 17 }
utsDot3OnuPonLoopbackTestVlanId OBJECT-TYPE
SYNTAX INTEGER ( 1..4094 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the VLAN ID for PON loopback test. The VID is only meaningful
in ISP mode, application mode and QinQ mode. In unique tag mode, VID
is not meaningful."
::= { utsDot3OnuEntry 18 }
utsDot3OnuEthernetLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
linkdown(1),
linkup(2),
unknow(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link status of ONU UNI port"
::= { utsDot3OnuEntry 19 }
--utsDot3OnuMaxPendingGrants OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The ONU Maximum Pending Grants."
-- ::= { utsDot3OnuEntry 20 }
-- zhaoxf added, Jan 15,2006
utsDot3OnuSwitchMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU switch part mac address."
::= { utsDot3OnuEntry 21 }
utsDot3OnuAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the ONU PON part administrator status"
::= { utsDot3OnuEntry 24 }
utsDot3OnuMulticastFilter OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the ONU multicast filtering."
::= { utsDot3OnuEntry 25 }
utsDot3OnuRMAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER
{
auto10M(1),
auto100M(2),
auto1000M(3),
half10M(4),
full10M(5),
half100M(6),
full100M(7)
--half1000M(8),
--full1000M(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the ONU remote managment auto negotiation attributes."
::= { utsDot3OnuEntry 26 }
utsDot3OnuReset OBJECT-TYPE
SYNTAX INTEGER
{
normal(1), -- read only for normal status
reset(2) -- write to reset the ONU
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the ONU PON part."
::= { utsDot3OnuEntry 27 }
--Added by tomsong for Q-in-Q function support 2006.6.22
utsDot3OnuQinQ OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Q-in-Q function, the default value is disable!"
::= { utsDot3OnuEntry 28 }
utsDot3OnuCATVStatus OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CATV. Only for ONU have CATV function, such as ONU3004, ONU804."
::= { utsDot3OnuEntry 29 }
-- ONU2 MIB
-- utsDot3Onu2Objects OBJECT IDENTIFIER ::= { utsDot3OnuMIB 2}
utsDot3Onu2Table OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 2 }
utsDot3Onu2Entry OBJECT-TYPE
SYNTAX UtsDot3Onu2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3Onu2ModuleId, utsDot3Onu2DeviceId,utsDot3Onu2PortId, utsDot3Onu2LogicalPortId }
::= { utsDot3Onu2Table 1 }
UtsDot3Onu2Entry ::=
SEQUENCE {
utsDot3Onu2ModuleId INTEGER,
utsDot3Onu2DeviceId INTEGER,
utsDot3Onu2PortId INTEGER,
utsDot3Onu2LogicalPortId INTEGER,
utsDot3OnuLlid INTEGER,
utsDot3EepromVersion INTEGER,
utsDot3OamVersion INTEGER,
utsDot3OnuMacAddress MacAddress,
utsDot3OnuAdmin INTEGER,
utsDot3OnuTransparentMode INTEGER,
utsDot3OnuStatus INTEGER,
utsDot3OnuMpcpTimeout INTEGER,
utsDot3OnuVendor OCTET STRING,
utsDot3OnuModule OCTET STRING,
utsDot3OnuHwVer OCTET STRING,
utsDot3OnuSerialNumber OCTET STRING,
utsDot3OnuLaserOnTime INTEGER,
utsDot3OnuLaserOffTime INTEGER,
utsDot3OnuDot1adEnable TruthValue,
utsDot3OnuDot1adTPID INTEGER,
utsDot3Onu2Reset INTEGER
}
utsDot3Onu2ModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2Entry 1 }
utsDot3Onu2DeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2Entry 2 }
utsDot3Onu2PortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2Entry 3 }
utsDot3Onu2LogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2Entry 4 }
utsDot3OnuLlid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical link ID"
::= { utsDot3Onu2Entry 5 }
utsDot3EepromVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"EEPROM version"
::= { utsDot3Onu2Entry 6 }
utsDot3OamVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OAM version"
::= { utsDot3Onu2Entry 7 }
utsDot3OnuMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU MAC address"
::= { utsDot3Onu2Entry 8 }
utsDot3OnuAdmin OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ONU Admin status"
::= { utsDot3Onu2Entry 9 }
utsDot3OnuTransparentMode OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ONU Admin status"
::= { utsDot3Onu2Entry 10 }
utsDot3OnuStatus OBJECT-TYPE
SYNTAX INTEGER
{
registered(1), -- registered
deregistered(2) -- deregistered normally
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ONU Admin status"
::= { utsDot3Onu2Entry 11 }
utsDot3OnuMpcpTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPCP timeout value"
::= { utsDot3Onu2Entry 12 }
utsDot3OnuVendor OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU vendor"
::= { utsDot3Onu2Entry 13 }
utsDot3OnuModule OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU Module"
::= { utsDot3Onu2Entry 14 }
utsDot3OnuHwVer OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU hardware version"
::= { utsDot3Onu2Entry 15 }
utsDot3OnuSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU hardware version"
::= { utsDot3Onu2Entry 16 }
utsDot3OnuLaserOnTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser on time"
::= { utsDot3Onu2Entry 17 }
utsDot3OnuLaserOffTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser off time"
::= { utsDot3Onu2Entry 18 }
utsDot3OnuDot1adEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to enable dot1ad"
::= { utsDot3Onu2Entry 19 }
utsDot3OnuDot1adTPID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tag protocol id, by default 0x88a8"
::= { utsDot3Onu2Entry 20 }
utsDot3Onu2Reset OBJECT-TYPE
SYNTAX INTEGER
{
normal(1), -- read only, normal status
resetGlobal(2), -- write only, reset ONU globally
resetMpcp(3) -- write only, MPCP reset
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset ONU"
::= { utsDot3Onu2Entry 21 }
-- ONU traffic profile
utsDot3Onu2TrafficProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2TrafficProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 5 }
utsDot3Onu2TrafficProfEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2TrafficProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3OnuTProfModuleId,utsDot3OnuTProfDeviceId,utsDot3OnuTProfPortId,
utsDot3OnuTProfLogicalPortId }
::= { utsDot3Onu2TrafficProfTable 1 }
UtsDot3Onu2TrafficProfEntry ::=
SEQUENCE {
utsDot3OnuTProfModuleId INTEGER,
utsDot3OnuTProfDeviceId INTEGER,
utsDot3OnuTProfPortId INTEGER,
utsDot3OnuTProfLogicalPortId INTEGER,
utsDot3OnuUpstreamPir INTEGER,
utsDot3OnuDownstreamPir INTEGER,
utsDot3OnuUpstreamCir INTEGER,
utsDot3OnuDownstreamCir INTEGER,
utsDot3OnuUpstreamMaxBurstSize INTEGER,
utsDot3OnuDownstreamMaxBurstSize INTEGER,
-- utsDot3OnuUpsteamMaxDelay INTEGER,
-- utsDot3OnuUpsteamMaxJitter INTEGER,
utsDot3OnuUpstreamWeight INTEGER,
utsDot3OnuUpstreamFir INTEGER
}
utsDot3OnuTProfModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2TrafficProfEntry 1 }
utsDot3OnuTProfDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2TrafficProfEntry 2 }
utsDot3OnuTProfPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2TrafficProfEntry 3 }
utsDot3OnuTProfLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2TrafficProfEntry 4 }
utsDot3OnuUpstreamPir OBJECT-TYPE
SYNTAX INTEGER(1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Bandwidth/PIR (in Kbps).
Upstream DBA: 256Kbps - 1000Mbps with the granularity of 256Kbps;
Upstream policing: 16Kbps - 1000Mbps with ranularity:
16Kbps - 4Mbps: 16Kbps;
4Mbps - 125Mbps: 512Kbps;
125Mbps- 1Gbps: 2Mbps."
::= { utsDot3Onu2TrafficProfEntry 5 }
utsDot3OnuDownstreamPir OBJECT-TYPE
SYNTAX INTEGER(1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Bandwidth/PIR (in Kbps).
Downstream policing: 16Kbps - 1000Mbps with ranularity:
16Kbps - 4Mbps: 16Kbps;
4Mbps - 125Mbps: 512Kbps;
125Mbps- 1Gbps: 2Mbps."
::= { utsDot3Onu2TrafficProfEntry 6 }
utsDot3OnuUpstreamCir OBJECT-TYPE
SYNTAX INTEGER(1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed Bandwidth/CIR (in Kbps).
Upstream DBA: 256Kbps - 970Mbps with the granularity of 256Kbps;
Upstream policing: 16Kbps - 1000Mbps with ranularity:
16Kbps - 4Mbps: 16Kbps;
4Mbps - 125Mbps: 512Kbps;
125Mbps- 1Gbps: 2Mbps."
::= { utsDot3Onu2TrafficProfEntry 7 }
utsDot3OnuDownstreamCir OBJECT-TYPE
SYNTAX INTEGER(1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed Bandwidth/CIR (in Kbps).
Downstream policing: 16Kbps - 1000Mbps with ranularity:
16Kbps - 4Mbps: 16Kbps;
4Mbps - 125Mbps: 512Kbps;
125Mbps- 1Gbps: 2Mbps."
::= { utsDot3Onu2TrafficProfEntry 8 }
utsDot3OnuUpstreamMaxBurstSize OBJECT-TYPE
SYNTAX INTEGER(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Burst Size (in Kb): 16KB - 1MB"
::= { utsDot3Onu2TrafficProfEntry 9 }
utsDot3OnuDownstreamMaxBurstSize OBJECT-TYPE
SYNTAX INTEGER(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Burst Size (in Kb): 16KB - 1MB"
::= { utsDot3Onu2TrafficProfEntry 10 }
utsDot3OnuUpstreamWeight OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority/Weight Field.The default priority for an ONU is 1. 1 is lowest and 10 is highest.
The priority value is used when deciding the proportion of bandwidth
given to an ONU (beyond its CIR) in case of upstream bandwidth contention among ONUs.
It is for both HW DBA and SW DBA."
DEFVAL {1}
::= { utsDot3Onu2TrafficProfEntry 11 }
utsDot3OnuUpstreamFir OBJECT-TYPE
SYNTAX INTEGER(0..1000000) -- kb
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Upstream fixed bandwidth, only available for software
DBA mode and on hardware DBA mode, the value shall keep Zero."
::= { utsDot3Onu2TrafficProfEntry 12 }
-- utsDot3Onu2Objects OBJECT IDENTIFIER ::= { utsDot3OnuMIB 2}
-- CTC spec
--
utsDot3Onu2CtcTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 10 }
utsDot3Onu2CtcEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3OnuCtcModuleId,utsDot3OnuCtcDeviceId,utsDot3OnuCtcPortId,utsDot3OnuCtcLogicalPortId}
::= { utsDot3Onu2CtcTable 1 }
UtsDot3Onu2CtcEntry ::=
SEQUENCE {
utsDot3OnuCtcModuleId INTEGER,
utsDot3OnuCtcDeviceId INTEGER,
utsDot3OnuCtcPortId INTEGER,
utsDot3OnuCtcLogicalPortId INTEGER,
utsDot3OnuCtcLlid INTEGER,
utsDot3OnuOui OCTET STRING,
utsDot3OnuOamExtVersion INTEGER,
utsDot3Onu2SerialNumber OCTET STRING,
utsDot3OnuFwVer OCTET STRING,
utsDot3OnuChipsetId OCTET STRING,
utsDot3OnuGEPortNumber INTEGER,
utsDot3OnuGEPortList OCTET STRING,
utsDot3OnuFEPortNumber INTEGER,
utsDot3OnuFEPortList OCTET STRING,
utsDot3OnuPOTSPortNumber INTEGER,
utsDot3OnuPOTSPortList OCTET STRING,
utsDot3OnuE1PortNumber INTEGER,
utsDot3OnuE1PortList OCTET STRING,
utsDot3OnuUpsQueueNum INTEGER,
utsDot3OnuMaxUpsQueueNum INTEGER,
utsDot3OnuDownsQueueNum INTEGER,
utsDot3OnuMaxDownsQueueNum INTEGER,
utsDot3OnuBatteryInstalled TruthValue,
utsDot3OnuFECAbility INTEGER,
utsDot3OnuFECMode INTEGER,
utsDot3OnuClassifiRuleClear INTEGER,
utsDot3OnuMulticastSwitch INTEGER,
utsDot3OnuMCastControlType INTEGER,
utsDot3OnuMCastEntryNum INTEGER,
utsDot3OnuMCastEntryClear INTEGER,
-- utsDot3OnuDBAQueueSetNum INTEGER,
utsDot3Onu2CtcReset INTEGER,
utsDot3Onu2CtcRegisterStatus INTEGER,
utsDot3Onu2CtcEncryptTraffic INTEGER,
utsDot3Onu2CtcFDBAgingTime INTEGER,
utsDot3Onu2CtcFDBClear INTEGER,
utsDot3Onu2CtcAdmin INTEGER,
utsDot3Onu2CtcRTT INTEGER,
utsDot3Onu2CtcPVid INTEGER,
utsDot3Onu2CtcMaxMacAddress INTEGER,
utsDot3Onu2CtcVoIPPortLock OCTET STRING,
utsDot3Onu2CtcE1PortLock OCTET STRING,
utsDot3Onu2CtcSwitchAdminStatus INTEGER,
-- utsDot3Onu2CtcOpticalPower INTEGER,
utsDot3Onu2FastLeaveAbility OCTET STRING,
utsDot3Onu2FastLeaveAdminControl INTEGER,
utsDot3Onu2EthernetPortAlarmReversion INTEGER,
utsDot3Onu2MulticastFilter INTEGER
}
utsDot3OnuCtcModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcEntry 1 }
utsDot3OnuCtcDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcEntry 2 }
utsDot3OnuCtcPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcEntry 3 }
utsDot3OnuCtcLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcEntry 4 }
utsDot3OnuCtcLlid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical link ID"
::= { utsDot3Onu2CtcEntry 5 }
utsDot3OnuOui OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OUI"
::= { utsDot3Onu2CtcEntry 6 }
utsDot3OnuOamExtVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OAM Extension version"
::= { utsDot3Onu2CtcEntry 7 }
utsDot3Onu2SerialNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(38)) -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor ID:4
ONU model:4
ONU ID: ONU MAC address
Hardware version:8
Software version:16
"
::= { utsDot3Onu2CtcEntry 8 }
utsDot3OnuFwVer OBJECT-TYPE
SYNTAX OCTET STRING -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU firmware version"
::= { utsDot3Onu2CtcEntry 9 }
utsDot3OnuChipsetId OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU chipset ID
Vendor ID:2
Chip model:2
Revision:1
IC_Version/date:3
"
::= { utsDot3Onu2CtcEntry 10 }
utsDot3OnuGEPortNumber OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GE port number"
::= { utsDot3Onu2CtcEntry 11 }
utsDot3OnuGEPortList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- CTC spec, 0x01[8..1] 23[16..9] 45[17..24] 67[25..32] 89[33..40] ab[41..48] cd[49..56] ef[57..64]
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GE port bitmap"
::= { utsDot3Onu2CtcEntry 12 }
utsDot3OnuFEPortNumber OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FE port number"
::= { utsDot3Onu2CtcEntry 13 }
utsDot3OnuFEPortList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- CTC spec, 0x01[1..8] 23[9..16] 45[17..24] 67[25..32] 89[33..40] ab[41..48] cd[49..56] ef[57..64]
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FE port bitmap"
::= { utsDot3Onu2CtcEntry 14 }
utsDot3OnuPOTSPortNumber OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"POTS port number"
::= { utsDot3Onu2CtcEntry 15 }
utsDot3OnuPOTSPortList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8)) -- ctc spec, 0x01[1..8]
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"POTS port bitmap"
::= { utsDot3Onu2CtcEntry 16 }
utsDot3OnuE1PortNumber OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"E1 port number"
::= { utsDot3Onu2CtcEntry 17 }
utsDot3OnuE1PortList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- CTC spec, 0x01[1..8]
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"E1 port bitmap"
::= { utsDot3Onu2CtcEntry 18 }
utsDot3OnuUpsQueueNum OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream queue number"
::= { utsDot3Onu2CtcEntry 19 }
utsDot3OnuMaxUpsQueueNum OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max upstream queue number"
::= { utsDot3Onu2CtcEntry 20 }
utsDot3OnuDownsQueueNum OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Down stream queue number"
::= { utsDot3Onu2CtcEntry 21 }
utsDot3OnuMaxDownsQueueNum OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max down stream queue number"
::= { utsDot3Onu2CtcEntry 22 }
utsDot3OnuBatteryInstalled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wether have ONU battery backup"
::= { utsDot3Onu2CtcEntry 23 }
utsDot3OnuFECAbility OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
{
unknown(1),
supported(2),
notsupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC ability"
::= { utsDot3Onu2CtcEntry 24 }
utsDot3OnuFECMode OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
{
unknown(1), -- read only
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set FEC mode"
::= { utsDot3Onu2CtcEntry 25 }
utsDot3OnuClassifiRuleClear OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
{
clear(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear all the classification rule for this ONU"
::= { utsDot3Onu2CtcEntry 26 }
utsDot3OnuMulticastSwitch OBJECT-TYPE
SYNTAX INTEGER -- CTC spec
{
ctc-specialSnooping(1), -- CTC specific IGMP snooping
ctc-controlSnooping(2), -- CTC controlable IGMP snooping
standard-Snooping(3) -- standard IGMP snooping
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the ONU multicast swith mechanism"
::= { utsDot3Onu2CtcEntry 27 }
utsDot3OnuMCastControlType OBJECT-TYPE
SYNTAX INTEGER
{
gda-mac-only(1), -- GDA MAC only
gda-mac-mvlan(2), -- GDA MAC + Multicast VLAN ID
gda-mac-sa-mac(3) -- optional
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the multicast control type"
::= { utsDot3Onu2CtcEntry 28 }
utsDot3OnuMCastEntryNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU multicast entry number"
::= { utsDot3Onu2CtcEntry 29 }
utsDot3OnuMCastEntryClear OBJECT-TYPE
SYNTAX INTEGER
{
clear(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the ONU multicast forward entry"
::= { utsDot3Onu2CtcEntry 30 }
-- utsDot3OnuDBAQueueSetNum OBJECT-TYPE
-- SYNTAX INTEGER 2..4
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Number of queue sets"
-- ::= { utsDot3Onu2CtcEntry 31 }
utsDot3Onu2CtcReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset ONU"
::= { utsDot3Onu2CtcEntry 32 }
utsDot3Onu2CtcRegisterStatus OBJECT-TYPE
SYNTAX INTEGER
{
register(1), -- accept ONU register request
deregister(2) -- do not accept ONU register request, but reserve the LLID
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NU register status"
::= { utsDot3Onu2CtcEntry 33 }
utsDot3Onu2CtcEncryptTraffic OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
ctc-churning(2),
aES48(3)
-- AES32(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the encryption for downstream traffic to specific ONU"
::= { utsDot3Onu2CtcEntry 34 }
utsDot3Onu2CtcFDBAgingTime OBJECT-TYPE
SYNTAX INTEGER(0..1048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"FDB aging time"
::= { utsDot3Onu2CtcEntry 35 }
utsDot3Onu2CtcFDBClear OBJECT-TYPE
SYNTAX INTEGER
{
clearAll(1),
clearUnicast(2),
clearMulticast(3),
clearDynamic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear ONU FDB entries"
::= { utsDot3Onu2CtcEntry 36}
utsDot3Onu2CtcAdmin OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin down/up control"
::= { utsDot3Onu2CtcEntry 37 }
utsDot3Onu2CtcRTT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU round trip time"
::= { utsDot3Onu2CtcEntry 38 }
utsDot3Onu2CtcPVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PVID setting for this ONU in OLT PON"
::= { utsDot3Onu2CtcEntry 39 }
utsDot3Onu2CtcMaxMacAddress OBJECT-TYPE --Add by Tomsong for NMS MRD 4.8.12, 2007.5.10
SYNTAX INTEGER(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Max Mac Address Number for a ONU in the PON port, 0 means no limit, default value is 0."
DEFVAL {0}
::= { utsDot3Onu2CtcEntry 40 }
utsDot3Onu2CtcVoIPPortLock OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VoIP port lock or unlock, the bits of string from left to right delegate VOIP port 1 to 64,and for the each bit,
1 means port activated or to activate the port, 0 means Port disactivated or to disactivate the port, the default
value for each bit is 0."
::= { utsDot3Onu2CtcEntry 50 }
utsDot3Onu2CtcE1PortLock OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"E1 port lock or unlock,the bits of string from left to right delegate E1 port 1 to 8,and for the each bit,
1 means port activated or to activate the port, 0 means Port disactivated or to disactivate the port, the default
value for each bit is 0."
::= { utsDot3Onu2CtcEntry 51 }
utsDot3Onu2CtcSwitchAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
notready(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The admin status of ONU switch, if ready,EMS could get and set for the ONU switch, if not-ready,wait for ONU switch ready."
::= { utsDot3Onu2CtcEntry 52 }
--utsDot3Onu2CtcOpticalPower OBJECT-TYPE
--SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"The optical power of the ONU from the OLT side to measure."
-- ::= { utsDot3Onu2CtcEntry 53 }
utsDot3Onu2FastLeaveAbility OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap,bit0: 1 means support Non-Fast-Leave in CTC IGMP snooping, 0 means not support;
bit1: 1 means support Fast-Leave in CTC IGMP snooping, 0 means not support;
bit2: 1 means support Non-Fast-Leave in CTC Control Multicast, 0 means not support;
bit3: 1 means support Fast-Leave in CTC Control Multicast, 0 means not support;
bit4~bit7 keep zero,ignore when receive"
::= { utsDot3Onu2CtcEntry 54 }
utsDot3Onu2FastLeaveAdminControl OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To control the state the Fast-Leave in ONU"
::= { utsDot3Onu2CtcEntry 55 }
utsDot3Onu2EthernetPortAlarmReversion OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To control the Ethernet port alarm whether to use the alarm reversion, the default is disable."
::= { utsDot3Onu2CtcEntry 56 }
utsDot3Onu2MulticastFilter OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To control the multicast switch of PON in the ONU."
::= { utsDot3Onu2CtcEntry 58 }
-- ONU QoS
utsDot3Onu2QoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2QoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 3 }
utsDot3Onu2QoSEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2QoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3OnuQosModuleId,utsDot3OnuQosDeviceId,
utsDot3OnuQosPortId,utsDot3OnuQosLogicalPortId }
::= { utsDot3Onu2QoSTable 1 }
UtsDot3Onu2QoSEntry ::=
SEQUENCE {
utsDot3OnuQosModuleId INTEGER,
utsDot3OnuQosDeviceId INTEGER,
utsDot3OnuQosPortId INTEGER,
utsDot3OnuQosLogicalPortId INTEGER,
utsDot3OnuQoSMode INTEGER,
utsDot3OnuAclClassifiEnable TruthValue,
utsDot3OnuSchedulingMode INTEGER,
utsDot3OnuSchedulingWeightRatio INTEGER,
utsDot3OnuDot1p2QueueMap OCTET STRING,
utsDot3OnuDscp2QueueMap OCTET STRING,
utsDot3OnuDefault802Dot1p INTEGER,
utsDot3OnuDefaultDscp INTEGER,
utsDot3OnuDefaultQueue INTEGER,
utsDot3OnuShaperAction INTEGER,
utsDot3OnuUpsPolicingAction INTEGER,
utsDot3OnuDownsPolicingAction INTEGER
}
utsDot3OnuQosModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2QoSEntry 1 }
utsDot3OnuQosDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2QoSEntry 2 }
utsDot3OnuQosPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2QoSEntry 3 }
utsDot3OnuQosLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2QoSEntry 4 }
utsDot3OnuQoSMode OBJECT-TYPE
SYNTAX INTEGER
{
dscp(1),
dot1p(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables either DSCP or 802.1p mode in the ONU to specify whether to
use the DSCP value or 802.1p value for packet marking/queueing."
::= { utsDot3Onu2QoSEntry 5 }
utsDot3OnuAclClassifiEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables ACL-based classification in the ONU.
If ACL-based classification is turned off, the incoming
packet's QoS marking will be used to decide the output queue,
and the packet will not be remarked."
::= { utsDot3Onu2QoSEntry 6 }
utsDot3OnuSchedulingMode OBJECT-TYPE
SYNTAX INTEGER -- strict priority or WRR or hierarchical mode
{
sp(1),
wrr(2),
hierarchical(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the output-queue scheduler policy at the ONU. The same policy applies to
both upstream and downstream schedulers. The scheduling can be either
strict-priority or Weighted-round-robin or Hierarchical queueing.
For weighted round robin, an adjacent-weight ratio of 1, 2, 3, 4, 5, 6, 7
or 8 can be configured. (For example, if the weight ratio is 1,
the weights for the eight queues are 1:1:1:1:1:1:1:1. If the weight
ratio is 2, the weights are 1:2:4:8:16:32:64:128.) For hierarchical
queueing, queues 7 and 6 are in strict priority mode and the remaining
queues are in weighted round robin mode."
::= { utsDot3Onu2QoSEntry 7 }
utsDot3OnuSchedulingWeightRatio OBJECT-TYPE
SYNTAX INTEGER(1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"weight ratio in case of WRR mode, the weight
ratio specifies the ratio of weights between two
adjacent priority queues. We cannot assign
arbitrary weights to different queues, we can
only assign weight ratio of 1,2,3,4,5,6,7.
"
::= { utsDot3Onu2QoSEntry 8 }
utsDot3OnuDot1p2QueueMap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1p to CoS output queue mapping table(3bits to 3 bits)
at the ONU. This table is used when the global_qos_mode is set to
802.1p and the classification-mode is turned off.
This table specifies 802.1p-to-queue mapping in both upstream
and downstream directions.
"
::= { utsDot3Onu2QoSEntry 9 }
utsDot3OnuDscp2QueueMap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the DSCP(most-significant three bits) to CoS output queue
mapping table(3bits to 3bits) at the ONU. This table is used
when the global_qos_mode is set to DSCP and the classification-mode
is turned off. This table specifies dscp-to-queue mapping in both
upstream and downstream direction.
"
::= { utsDot3Onu2QoSEntry 10 }
utsDot3OnuDefault802Dot1p OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the default value for the 802.1p for packets at the ONU.
In the 802.1p QoS mode, the default 802.1p and default CoS queue
values are used for an unclassified packet (when classification
mode is turned on) or for untagged packets (when classification
mode is turned off).
"
::= { utsDot3Onu2QoSEntry 11 }
utsDot3OnuDefaultDscp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the default value for the DSCP for packets at the ONU.
In the DSCP QoS mode, the default DSCP and default CoS queue values
are used for an unclassified packet (when classification mode is
turned on) or for non-IP packets (when classification mode is turned off).
"
::= { utsDot3Onu2QoSEntry 12 }
utsDot3OnuDefaultQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the default value for the CoS queue at the ONU.
"
::= { utsDot3Onu2QoSEntry 13 }
utsDot3OnuShaperAction OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
cir(2),
pir(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets (for a particular ONU's traffic) the downstream traffic-shaping
configuration at the OLT in terms of whether to shape
downstream ONU traffic according to its CIR or PIR
rates, specified in the ONU's traffic profile.
The ONU to be shaped is specified by the OLT device
id and its LLID-based logical port with which the ONU
is associated. Downstream traffic is shaped by a tokenbucket
shaper to smoothen the traffic and prevent packet drops downstream
at the ONU due to its limited buffer space.
"
::= { utsDot3Onu2QoSEntry 14 }
utsDot3OnuUpsPolicingAction OBJECT-TYPE
SYNTAX INTEGER
{
disable(1), -- disable policing
mark-cir(2), -- Mark traffic once it exceeds its CIR
mark-pir(3), -- Mark traffic once it exceeds its CIR
mark-cir-drop-pir(4), -- Mark traffic once it exceeds its CIR and drop once it exceeds its PIR
drop-cir(5), -- Drop traffic once it exceeds its CIR
drop-pir(6) -- Drop traffic once it exceeds its PIR
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets (for a particular ONU's traffic) the upstream
traffic-policing action at the OLT, in terms of whether the policer
should mark and/or drop packets above the CIR/PIR rates specified
in the ONU's traffic profile.
"
::= { utsDot3Onu2QoSEntry 16 }
utsDot3OnuDownsPolicingAction OBJECT-TYPE
SYNTAX INTEGER
{
disable(1), -- disable policing
mark-cir(2), -- Mark traffic once it exceeds its CIR
mark-pir(3), -- Mark traffic once it exceeds its CIR
mark-cir-drop-pir(4), -- Mark traffic once it exceeds its CIR and drop once it exceeds its PIR
drop-cir(5), -- Drop traffic once it exceeds its CIR
drop-pir(6) -- Drop traffic once it exceeds its PIR
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets (for a particular ONU's traffic) the downstream
traffic-policing action at the OLT, in terms of whether the policer
should mark and/or drop packets above the CIR/PIR rates specified
in the ONU's traffic profile.
"
::= { utsDot3Onu2QoSEntry 17 }
-- ONU traffic Classification rule
utsDot3Onu2ClassifiRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2ClassifiRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 4 }
utsDot3Onu2ClassifiRuleEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2ClassifiRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3OnuClassifiModuleId,utsDot3OnuClassifiDeviceId,
utsDot3OnuClassifiPortId, utsDot3OnuClassifiLogicalPortId }
::= { utsDot3Onu2ClassifiRuleTable 1 }
UtsDot3Onu2ClassifiRuleEntry ::=
SEQUENCE {
utsDot3OnuClassifiModuleId INTEGER,
utsDot3OnuClassifiDeviceId INTEGER,
utsDot3OnuClassifiPortId INTEGER,
utsDot3OnuClassifiLogicalPortId INTEGER,
utsDot3OnuClassifiRuleIndex INTEGER,
utsDot3OnuClassifiRuleEnable TruthValue,
utsDot3OnuClassifiRuleProtId INTEGER,
utsDot3OnuClassifiRuleUniPort INTEGER,
utsDot3OnuClassifiRuleL4SrcPortStart INTEGER,
utsDot3OnuClassifiRuleL4SrcPortEnd INTEGER,
utsDot3OnuClassifiRuleL4DstPortStart INTEGER,
utsDot3OnuClassifiRuleL4DstPortEnd INTEGER,
utsDot3OnuClassifiRuleDscp INTEGER,
utsDot3OnuClassifiRule802Dot1p INTEGER,
utsDot3OnuClassifiRuleCosQueue INTEGER
}
utsDot3OnuClassifiModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2ClassifiRuleEntry 1 }
utsDot3OnuClassifiDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2ClassifiRuleEntry 2 }
utsDot3OnuClassifiPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2ClassifiRuleEntry 3 }
utsDot3OnuClassifiLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2ClassifiRuleEntry 4 }
utsDot3OnuClassifiRuleIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ACL entry index(from 0 to 7)"
::= { utsDot3Onu2ClassifiRuleEntry 5 }
utsDot3OnuClassifiRuleEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether Classifier rule is valid or not"
::= { utsDot3Onu2ClassifiRuleEntry 6 }
utsDot3OnuClassifiRuleProtId OBJECT-TYPE
SYNTAX INTEGER
{
tcp(1), -- incoming Protocol id field must be TCP
udp(2), -- incoming Protocol id field must be UDP
any(3) -- incoming Protocol id field can be either TCP or UDP
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol id enum - TCP, UDP or ANY"
::= { utsDot3Onu2ClassifiRuleEntry 7 }
utsDot3OnuClassifiRuleUniPort OBJECT-TYPE
SYNTAX INTEGER -- Input UNI port
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Input UNI port"
::= { utsDot3Onu2ClassifiRuleEntry 8 }
utsDot3OnuClassifiRuleL4SrcPortStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP Source Port start"
::= { utsDot3Onu2ClassifiRuleEntry 9 }
utsDot3OnuClassifiRuleL4SrcPortEnd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP Source Port end"
::= { utsDot3Onu2ClassifiRuleEntry 10 }
utsDot3OnuClassifiRuleL4DstPortStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP destination Port start"
::= { utsDot3Onu2ClassifiRuleEntry 11 }
utsDot3OnuClassifiRuleL4DstPortEnd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP destination Port end"
::= { utsDot3Onu2ClassifiRuleEntry 12 }
utsDot3OnuClassifiRuleDscp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing DSCP value (0-64). This field is
valid when the global QoS mode is DSCP."
::= { utsDot3Onu2ClassifiRuleEntry 13 }
utsDot3OnuClassifiRule802Dot1p OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing 802.1p value (0-7). This field is
valid when the global QoS mode is 802.1p "
::= { utsDot3Onu2ClassifiRuleEntry 14 }
utsDot3OnuClassifiRuleCosQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Output CoS Queue number (queue# 0 to 7)"
::= { utsDot3Onu2ClassifiRuleEntry 15 }
-- ONU Ethernet port configuration
utsDot3Onu2CtcEtherPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcEtherPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 11 }
utsDot3Onu2CtcEtherPortEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcEtherPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3OnuEtherPortModuleId,utsDot3OnuEtherPortDeviceId,utsDot3OnuEtherPortPortId,
utsDot3OnuEtherPortLogicalPortId,utsDot3OnuEtherPortIndex }
::= { utsDot3Onu2CtcEtherPortTable 1 }
UtsDot3Onu2CtcEtherPortEntry ::=
SEQUENCE {
utsDot3OnuEtherPortModuleId INTEGER,
utsDot3OnuEtherPortDeviceId INTEGER,
utsDot3OnuEtherPortPortId INTEGER,
utsDot3OnuEtherPortLogicalPortId INTEGER,
utsDot3OnuEtherPortIndex INTEGER,
utsDot3OnuEtherPortPhyAdminState INTEGER,
utsDot3OnuEtherPortPhyAdminCtrl INTEGER,
utsDot3OnuEtherPortAutoNegAdminSt INTEGER,
utsDot3OnuEtherPortAutoNegLocTec OCTET STRING,
utsDot3OnuEtherPortAutoNegAbility OCTET STRING,
utsDot3OnuEtherPortAutoNegRestart INTEGER,
utsDot3OnuEtherPortAutoNegAdminCtrl INTEGER,
utsDot3OnuEtherPortLinkState INTEGER,
utsDot3OnuEtherPortPause INTEGER,
utsDot3OnuEtherPortPolicingEnable TruthValue,
utsDot3OnuEtherPortPolicingCIR INTEGER,
utsDot3OnuEtherPortPolicingCBS INTEGER,
utsDot3OnuEtherPortPolicingEBS INTEGER,
utsDot3OnuEtherPortVlanMode INTEGER,
utsDot3OnuEtherPortVlanTPID INTEGER,
utsDot3OnuEtherPortVlanTag INTEGER,
-- utsDot3OnuEtherPortVlanDefTag INTEGER,
utsDot3OnuEtherPortVlanTranslation OCTET STRING,
utsDot3OnuEtherPortMaxMVlanNum INTEGER,
utsDot3OnuEtherPortMVlanList OCTET STRING,
utsDot3OnuEtherPortMVlanClear INTEGER,
utsDot3OnuEtherPortMaxMcGroupNum INTEGER,
utsDot3OnuEtherPortMcTagStripe INTEGER,
utsDot3OnuEtherPortClassifiRuleClear INTEGER,
utsDot3OnuEtherPortDSPolicingEnable TruthValue,
utsDot3OnuEtherPortDSPolicingCIR INTEGER,
utsDot3OnuEtherPortDSPolicingPIR INTEGER,
utsDot3OnuEtherPortVlanNTo1Translation OCTET STRING
}
utsDot3OnuEtherPortModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcEtherPortEntry 1 }
utsDot3OnuEtherPortDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcEtherPortEntry 2 }
utsDot3OnuEtherPortPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcEtherPortEntry 3 }
utsDot3OnuEtherPortLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcEtherPortEntry 4 }
utsDot3OnuEtherPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL entry index(from 0 to 7)"
::= { utsDot3Onu2CtcEtherPortEntry 5 }
utsDot3OnuEtherPortPhyAdminState OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Phy admin status"
::= { utsDot3Onu2CtcEtherPortEntry 6 }
utsDot3OnuEtherPortPhyAdminCtrl OBJECT-TYPE
SYNTAX INTEGER
{
deactivate(1), -- write only?
activate(2) -- write only?
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Phy admin control"
::= { utsDot3Onu2CtcEtherPortEntry 7 }
utsDot3OnuEtherPortAutoNegAdminSt OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto negotiation admin state"
::= { utsDot3Onu2CtcEtherPortEntry 8 }
utsDot3OnuEtherPortAutoNegLocTec OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3..8))
-- {
-- global(1), global
-- other(2),
-- unknown(3),
-- baseT10(14), 10BASE-T
-- baseTFD10(142), 10BASE-TFD
-- baseT4100(23), 100BASE-T4
-- baseTx100(25), 100BASE-TX
-- baseTxFD100(252), 100BASE-TXFD
-- baseT2100(32), 100BASE-T2
-- baseT2FD100(322), 100BASE-T2FD
-- baseX1000(36), 1000BASE-X
-- baseXFD1000(362), 1000BASE-XFD
-- baseT1000(40), 1000BASE-T
-- baseTFD1000(402), 1000BASE-TFD");
-- fdx_pause(312),
-- fdx_apause(313),
-- fdx_spause(314),
-- fdx_bpause(315),
-- rem_fault1(37)
-- rem_fault2(372)
-- isoethernet(8029)
-- na(1000) NA
-- }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto negotiation local technoloty ability"
::= { utsDot3Onu2CtcEtherPortEntry 9 }
utsDot3OnuEtherPortAutoNegAbility OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3..8))
-- {
-- global(1), global
-- other(2),
-- unknown(3),
-- baseT10(14), 10BASE-T
-- baseTFD10(142), 10BASE-TFD
-- baseT4100(23), 100BASE-T4
-- baseTx100(25), 100BASE-TX
-- baseTxFD100(252), 100BASE-TXFD
-- baseT2100(32), 100BASE-T2
-- baseT2FD100(322), 100BASE-T2FD
-- baseX1000(36), 1000BASE-X
-- baseXFD1000(362), 1000BASE-XFD
-- baseT1000(40), 1000BASE-T
-- baseTFD1000(402), 1000BASE-TFD");
-- fdx_pause(312),
-- fdx_apause(313),
-- fdx_spause(314),
-- fdx_bpause(315),
-- rem_fault1(37)
-- rem_fault2(372)
-- isoethernet(8029)
-- na(1000) NA
-- }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto negotiation ability notification"
::= { utsDot3Onu2CtcEtherPortEntry 10 }
utsDot3OnuEtherPortAutoNegRestart OBJECT-TYPE
SYNTAX INTEGER
{
restart(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Force restart auto negotiation"
::= { utsDot3Onu2CtcEtherPortEntry 11 }
utsDot3OnuEtherPortAutoNegAdminCtrl OBJECT-TYPE
SYNTAX INTEGER
{
deactivate(1), --
activate(2) --
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable phy auto negotiation function"
::= { utsDot3Onu2CtcEtherPortEntry 12 }
utsDot3OnuEtherPortLinkState OBJECT-TYPE
SYNTAX INTEGER
{
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL entry index(from 0 to 7)"
::= { utsDot3Onu2CtcEtherPortEntry 30 }
utsDot3OnuEtherPortPause OBJECT-TYPE
SYNTAX INTEGER
{
disable(1), -- Flow control is disabled
enable(2) -- Flow control is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UNI port flow control function"
::= { utsDot3Onu2CtcEtherPortEntry 31 }
utsDot3OnuEtherPortPolicingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable ingress policing function"
::= { utsDot3Onu2CtcEtherPortEntry 32 }
utsDot3OnuEtherPortPolicingCIR OBJECT-TYPE
SYNTAX INTEGER -- Kbps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ingress CIR."
::= { utsDot3Onu2CtcEtherPortEntry 33 }
utsDot3OnuEtherPortPolicingCBS OBJECT-TYPE
SYNTAX INTEGER -- byte
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port policing bucket depth. Only is valid when the port policing is enabled."
::= { utsDot3Onu2CtcEtherPortEntry 34 }
utsDot3OnuEtherPortPolicingEBS OBJECT-TYPE
SYNTAX INTEGER -- byte
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port policing extra burst size. Only is valid when the port policing is enabled."
::= { utsDot3Onu2CtcEtherPortEntry 35 }
utsDot3OnuEtherPortVlanMode OBJECT-TYPE
SYNTAX INTEGER
{
transparent(1), -- transparent mode
tag(2), -- tag mode
translation(3), -- translation mode
vlanStacking(4) -- VLAN stacking mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ether port VLAN mode"
::= { utsDot3Onu2CtcEtherPortEntry 36 }
utsDot3OnuEtherPortVlanTPID OBJECT-TYPE
SYNTAX INTEGER --defult 0x88a8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN TPID under VLAN tag mode"
::= { utsDot3Onu2CtcEtherPortEntry 37 }
utsDot3OnuEtherPortVlanTag OBJECT-TYPE
SYNTAX INTEGER(1..4094) --
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN tag under VLAN tag mode, or Default VLAN tag under VLAN translation/stacking mode"
::= { utsDot3Onu2CtcEtherPortEntry 38 }
utsDot3OnuEtherPortVlanTranslation OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(64)) --0x 0123[in-tpid 1] 4567[in-tag 1] 89ab[out-tpid 1] cdef[out-tag 1] 0x0123[in-tpid 2] 4567[in-tag 2] 89ab[out-tpid 2] cdef[out-tag 2]...
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN translation entry or VLAN stacking entry, MAX 8 entry, this is only for 1:1 mode."
::= { utsDot3Onu2CtcEtherPortEntry 40 }
utsDot3OnuEtherPortMaxMVlanNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max multicast VLAN number"
::= { utsDot3Onu2CtcEtherPortEntry 41 }
utsDot3OnuEtherPortMVlanList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8..128)) -- 0x01 23[MVlan 1] 45 67[MVlan 2] 89 ab[MVlan 3]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast VLAN list for this ONU UNI port, the minimal multicast
VLAN number could be displayed is 4 and the max number is 32."
::= { utsDot3Onu2CtcEtherPortEntry 42 }
utsDot3OnuEtherPortMVlanClear OBJECT-TYPE
SYNTAX INTEGER
{
clear(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the multicast VLAN of the port"
::= { utsDot3Onu2CtcEtherPortEntry 43 }
utsDot3OnuEtherPortMaxMcGroupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max multicast group number, the range should be from 4 to 1024."
::= { utsDot3Onu2CtcEtherPortEntry 44 }
utsDot3OnuEtherPortMcTagStripe OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast VLAN tag stripe or not"
::= { utsDot3Onu2CtcEtherPortEntry 45 }
utsDot3OnuEtherPortClassifiRuleClear OBJECT-TYPE
SYNTAX INTEGER
{
clear(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the classification rule of the port"
::= { utsDot3Onu2CtcEtherPortEntry 46 }
utsDot3OnuEtherPortDSPolicingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable egress policing function"
::= { utsDot3Onu2CtcEtherPortEntry 47 }
utsDot3OnuEtherPortDSPolicingCIR OBJECT-TYPE
SYNTAX INTEGER --kbps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress CIR, value from 0x0 to 0xffffffff, Kbps."
::= { utsDot3Onu2CtcEtherPortEntry 48 }
utsDot3OnuEtherPortDSPolicingPIR OBJECT-TYPE
SYNTAX INTEGER -- kbps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress PIR, value from 0x0 to 0xffffffff, Kbps."
::= { utsDot3Onu2CtcEtherPortEntry 49 }
utsDot3OnuEtherPortVlanNTo1Translation OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(64)) --0x 0123[in-tpid 1] 4567[in-tag 1] 89ab[out-tpid 1] cdef[out-tag 1] 0x0123[in-tpid 2] 4567[in-tag 2] 89ab[out-tpid 2] cdef[out-tag 2]...
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN translation entry or VLAN stacking entry, MAX 8 entry, this is only for N:1 mode."
::= { utsDot3Onu2CtcEtherPortEntry 50 }
-- ONU Ethernet port classification configuration
utsDot3Onu2CtcEtherPortClassifiTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcEtherPortClassifiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 12 }
utsDot3Onu2CtcEtherPortClassifiEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcEtherPortClassifiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3OnuEthPClassifiModuleId,utsDot3OnuEthPClassifiDeviceId,
utsDot3OnuEthPClassifiPortId,utsDot3OnuEthPClassifiLogicalPortId,
utsDot3OnuEthPClassifiPortIndex,utsDot3OnuEthPClassifiRuleIndex}
::= { utsDot3Onu2CtcEtherPortClassifiTable 1 }
UtsDot3Onu2CtcEtherPortClassifiEntry ::=
SEQUENCE {
utsDot3OnuEthPClassifiModuleId INTEGER,
utsDot3OnuEthPClassifiDeviceId INTEGER,
utsDot3OnuEthPClassifiPortId INTEGER,
utsDot3OnuEthPClassifiLogicalPortId INTEGER,
utsDot3OnuEthPClassifiPortIndex INTEGER,
utsDot3OnuEthPClassifiRuleIndex INTEGER,
utsDot3OnuClassifiPrecedence INTEGER,
utsDot3OnuClassifiQueueMapped INTEGER,
utsDot3OnuClassifiEtherPriMark INTEGER,
utsDot3OnuClassifiFSelect1 INTEGER,
utsDot3OnuClassifiFMatch1 OCTET STRING,
utsDot3OnuClassifiOperator1 INTEGER,
utsDot3OnuClassifiFSelect2 INTEGER,
utsDot3OnuClassifiFMatch2 OCTET STRING,
utsDot3OnuClassifiOperator2 INTEGER,
utsDot3OnuClassifiFSelect3 INTEGER,
utsDot3OnuClassifiFMatch3 OCTET STRING,
utsDot3OnuClassifiOperator3 INTEGER,
utsDot3OnuClassifiRowStatus RowStatus
}
utsDot3OnuEthPClassifiModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcEtherPortClassifiEntry 1 }
utsDot3OnuEthPClassifiDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcEtherPortClassifiEntry 2 }
utsDot3OnuEthPClassifiPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcEtherPortClassifiEntry 3 }
utsDot3OnuEthPClassifiLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcEtherPortClassifiEntry 4 }
utsDot3OnuEthPClassifiPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Ethernet port index"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 5 }
utsDot3OnuEthPClassifiRuleIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Ethernet port classification rule"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 6 }
utsDot3OnuClassifiPrecedence OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Phy admin status"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 7 }
utsDot3OnuClassifiQueueMapped OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Queue mapped"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 8 }
utsDot3OnuClassifiEtherPriMark OBJECT-TYPE
SYNTAX INTEGER(0..255) -- 0..7, 255: 255 means no mark
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Queue mapped"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 9 }
utsDot3OnuClassifiFSelect1 OBJECT-TYPE
SYNTAX INTEGER(0..11) --
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Field select for entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 11 }
utsDot3OnuClassifiFMatch1 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(6)) -- 0x fe dc ba 98 76 54 32 10
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Match value for field 1 in entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 12 }
utsDot3OnuClassifiOperator1 OBJECT-TYPE
SYNTAX INTEGER(0..7) --
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Validation operator for entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 13 }
utsDot3OnuClassifiFSelect2 OBJECT-TYPE
SYNTAX INTEGER(0..11) --
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Field select for entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 21 }
utsDot3OnuClassifiFMatch2 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(6)) -- 0x fe dc ba 98 76 54 32 10
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Match value for field 1 in entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 22 }
utsDot3OnuClassifiOperator2 OBJECT-TYPE
SYNTAX INTEGER(0..7) --
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Validation operator for entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 23 }
utsDot3OnuClassifiFSelect3 OBJECT-TYPE
SYNTAX INTEGER(0..11) --
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Field select for entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 31 }
utsDot3OnuClassifiFMatch3 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(6)) -- 0x fe dc ba 98 76 54 32 10
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Match value for field 1 in entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 32 }
utsDot3OnuClassifiOperator3 OBJECT-TYPE
SYNTAX INTEGER(0..7) --
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Validation operator for entry 1"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 33 }
utsDot3OnuClassifiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsDot3Onu2CtcEtherPortClassifiEntry 100 }
-- ONU multicast control configuration
utsDot3Onu2CtcMulticastCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcMulticastCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU multicast control MIBs."
::= { utsDot3OnuObjects 13 }
utsDot3Onu2CtcMulticastCtrlEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcMulticastCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu multicast control MIBs table."
INDEX { utsDot3Onu2MCtrlModuleId,utsDot3Onu2MCtrlDeviceId,
utsDot3Onu2MCtrlPortId,utsDot3Onu2MCtrlLogicalPortId,
utsDot3Onu2MCastEntryIndex}
::= { utsDot3Onu2CtcMulticastCtrlTable 1 }
UtsDot3Onu2CtcMulticastCtrlEntry ::=
SEQUENCE {
utsDot3Onu2MCtrlModuleId INTEGER,
utsDot3Onu2MCtrlDeviceId INTEGER,
utsDot3Onu2MCtrlPortId INTEGER,
utsDot3Onu2MCtrlLogicalPortId INTEGER,
utsDot3Onu2MCastEntryIndex INTEGER,
utsDot3OnuMCastEntryUserId INTEGER,
utsDot3OnuMCastEntryMcVlanId INTEGER,
utsDot3OnuMCastEntryMcMacAddr MacAddress
-- utsDot3OnuMCastEntryRowStatus RowStatus
}
utsDot3Onu2MCtrlModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcMulticastCtrlEntry 1 }
utsDot3Onu2MCtrlDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcMulticastCtrlEntry 2 }
utsDot3Onu2MCtrlPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcMulticastCtrlEntry 3 }
utsDot3Onu2MCtrlLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcMulticastCtrlEntry 4 }
utsDot3Onu2MCastEntryIndex OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU multicast entry index"
::= { utsDot3Onu2CtcMulticastCtrlEntry 5 }
utsDot3OnuMCastEntryUserId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User ID or port ID"
::= { utsDot3Onu2CtcMulticastCtrlEntry 6 }
utsDot3OnuMCastEntryMcVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast VLAN ID"
::= { utsDot3Onu2CtcMulticastCtrlEntry 7 }
utsDot3OnuMCastEntryMcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast MAC address"
::= { utsDot3Onu2CtcMulticastCtrlEntry 8 }
-- CTC ONU DBA configuration
utsDot3Onu2CtcDbaTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcDbaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU multicast control MIBs."
::= { utsDot3OnuObjects 14 }
utsDot3Onu2CtcDbaEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcDbaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu multicast control MIBs table."
INDEX { utsDot3OnuDbaModuleId,utsDot3OnuDbaDeviceId,utsDot3OnuDbaPortId,
utsDot3OnuDbaLogicalPortId }
::= { utsDot3Onu2CtcDbaTable 1 }
UtsDot3Onu2CtcDbaEntry ::=
SEQUENCE {
utsDot3OnuDbaModuleId INTEGER,
utsDot3OnuDbaDeviceId INTEGER,
utsDot3OnuDbaPortId INTEGER,
utsDot3OnuDbaLogicalPortId INTEGER,
utsDot3Onu2DbaQueueSetNum INTEGER,
utsDot3Onu2DbaQueueBitmap1 OCTET STRING,
utsDot3Onu2DbaQueueSetThreshold1 OCTET STRING,
utsDot3Onu2DbaQueueBitmap2 OCTET STRING,
utsDot3Onu2DbaQueueSetThreshold2 OCTET STRING,
utsDot3Onu2DbaQueueBitmap3 OCTET STRING,
utsDot3Onu2DbaQueueSetThreshold3 OCTET STRING,
utsDot3Onu2DbaQueueBitmap4 OCTET STRING,
utsDot3Onu2DbaQueueSetThreshold4 OCTET STRING
-- utsDot3Onu2DbaQueueSetCommit INTEGER
}
utsDot3OnuDbaModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcDbaEntry 1 }
utsDot3OnuDbaDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcDbaEntry 2 }
utsDot3OnuDbaPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcDbaEntry 3 }
utsDot3OnuDbaLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcDbaEntry 4 }
utsDot3Onu2DbaQueueSetNum OBJECT-TYPE
SYNTAX INTEGER (2..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of queue sets"
::= { utsDot3Onu2CtcDbaEntry 5 }
utsDot3Onu2DbaQueueBitmap1 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- 0B: Bit 0[Que 1] 1[Que 2] 2[Que 3] 3[Que 4] 4[Que 5] 5[Que 6] 6[Que 7] 7[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue bitmap, bit value 1 indecate the corresponding queue is present."
::= { utsDot3Onu2CtcDbaEntry 7 }
utsDot3Onu2DbaQueueSetThreshold1 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16)) -- 0x: 0123[Que 1] 4567[Que 2] 89ab[Que 3] cdef[Que 4] ...
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for queues in queue set 1"
::= { utsDot3Onu2CtcDbaEntry 8 }
utsDot3Onu2DbaQueueBitmap2 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- 0B: Bit 0[Que 1] 1[Que 2] 2[Que 3] 3[Que 4] 4[Que 5] 5[Que 6] 6[Que 7] 7[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue bitmap, bit value 1 indecate the corresponding queue is present."
::= { utsDot3Onu2CtcDbaEntry 9 }
utsDot3Onu2DbaQueueSetThreshold2 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16)) -- 0x: 01[Que 1] 12[Que 2] 34[Que 3] 56[Que 4] 78[Que 5] 9a[Que 6] bc[Que 7] de[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for queues in queue set 2"
::= { utsDot3Onu2CtcDbaEntry 10 }
utsDot3Onu2DbaQueueBitmap3 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- 0B: Bit 0[Que 1] 1[Que 2] 2[Que 3] 3[Que 4] 4[Que 5] 5[Que 6] 6[Que 7] 7[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue bitmap, bit value 1 indecate the corresponding queue is present."
::= { utsDot3Onu2CtcDbaEntry 11 }
utsDot3Onu2DbaQueueSetThreshold3 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16)) -- 0x: 01[Que 1] 12[Que 2] 34[Que 3] 56[Que 4] 78[Que 5] 9a[Que 6] bc[Que 7] de[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for queues in queue set 3"
::= { utsDot3Onu2CtcDbaEntry 12 }
utsDot3Onu2DbaQueueBitmap4 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- 0B: Bit 0[Que 1] 1[Que 2] 2[Que 3] 3[Que 4] 4[Que 5] 5[Que 6] 6[Que 7] 7[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue bitmap, bit value 1 indecate the corresponding queue is present."
::= { utsDot3Onu2CtcDbaEntry 13 }
utsDot3Onu2DbaQueueSetThreshold4 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16)) -- 0x: 01[Que 1] 12[Que 2] 34[Que 3] 56[Que 4] 78[Que 5] 9a[Que 6] bc[Que 7] de[Que 8]
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for queues in queue set 4"
::= { utsDot3Onu2CtcDbaEntry 14 }
-- ONU loopback test
utsDot3Onu2CtcLpBkTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcLpBkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU multicast control MIBs."
::= { utsDot3OnuObjects 15 }
utsDot3Onu2CtcLpBkEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcLpBkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu multicast control MIBs table."
INDEX { utsDot3OnuLpBkModuleId,utsDot3OnuLpBkDeviceId,utsDot3OnuLpBkPortId,
utsDot3OnuLpBkLogicalPortId }
::= { utsDot3Onu2CtcLpBkTable 1 }
UtsDot3Onu2CtcLpBkEntry ::=
SEQUENCE {
utsDot3OnuLpBkModuleId INTEGER,
utsDot3OnuLpBkDeviceId INTEGER,
utsDot3OnuLpBkPortId INTEGER,
utsDot3OnuLpBkLogicalPortId INTEGER,
utsDot3OnuLpBkMode INTEGER,
utsDot3OnuLpBkPacketSize INTEGER,
utsDot3OnuLpBkPacketNum INTEGER,
utsDot3OnuLpBkStart TruthValue,
utsDot3OnuLpBkEnd TruthValue,
utsDot3OnuLpBkResult OCTET STRING,
utsDot3OnuLpBkRowStatus RowStatus
}
utsDot3OnuLpBkModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcLpBkEntry 1 }
utsDot3OnuLpBkDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcLpBkEntry 2 }
utsDot3OnuLpBkPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcLpBkEntry 3 }
utsDot3OnuLpBkLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcLpBkEntry 4 }
utsDot3OnuLpBkMode OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" loopback mode"
::= { utsDot3Onu2CtcLpBkEntry 5 }
utsDot3OnuLpBkPacketSize OBJECT-TYPE
SYNTAX INTEGER(64..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"loopback packet size"
::= { utsDot3Onu2CtcLpBkEntry 6 }
utsDot3OnuLpBkPacketNum OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"loopback packet number"
::= { utsDot3Onu2CtcLpBkEntry 7 }
utsDot3OnuLpBkStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"loopback test start or not"
::= { utsDot3Onu2CtcLpBkEntry 8 }
utsDot3OnuLpBkEnd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"loopback test stop or not"
::= { utsDot3Onu2CtcLpBkEntry 9 }
utsDot3OnuLpBkResult OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"loopback test result, like:
Out of Seqance frames: 0
99 packets transmitted, 99 received, 0% packet loss
rtt min/avg/max = 0/0/0 ms"
::= { utsDot3Onu2CtcLpBkEntry 10 }
utsDot3OnuLpBkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsDot3Onu2CtcLpBkEntry 11 }
-- ONU Ethernet port classification configuration application table
utsDot3Onu2CtcClassifiAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcClassifiAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 16 }
utsDot3Onu2CtcClassifiAppEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcClassifiAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu classification application MIBs table."
INDEX { utsDot3OnuClassifiAppModuleId,utsDot3OnuClassifiAppDeviceId,
utsDot3OnuClassifiAppPortId,utsDot3OnuClassifiAppLogicalPortId,
utsDot3OnuClassifiAppPortIndex, utsDot3OnuClassifiAppClassId,
utsDot3OnuClassifiAppFieldId}
::= { utsDot3Onu2CtcClassifiAppTable 1 }
UtsDot3Onu2CtcClassifiAppEntry ::=
SEQUENCE {
utsDot3OnuClassifiAppModuleId INTEGER,
utsDot3OnuClassifiAppDeviceId INTEGER,
utsDot3OnuClassifiAppPortId INTEGER,
utsDot3OnuClassifiAppLogicalPortId INTEGER,
utsDot3OnuClassifiAppPortIndex INTEGER,
utsDot3OnuClassifiAppClassId INTEGER,
utsDot3OnuClassifiAppFieldId INTEGER,
-- utsDot3OnuClassifiAppRuleIndex INTEGER,
utsDot3OnuClassifiAppPrecedence INTEGER,
utsDot3OnuClassifiAppQueueMapped INTEGER,
utsDot3OnuClassifiAppPriMark INTEGER,
utsDot3OnuClassifiAppRowStatus RowStatus
}
utsDot3OnuClassifiAppModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcClassifiAppEntry 1 }
utsDot3OnuClassifiAppDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcClassifiAppEntry 2 }
utsDot3OnuClassifiAppPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcClassifiAppEntry 3 }
utsDot3OnuClassifiAppLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcClassifiAppEntry 4 }
utsDot3OnuClassifiAppPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Ethernet port index"
::= { utsDot3Onu2CtcClassifiAppEntry 5 }
utsDot3OnuClassifiAppClassId OBJECT-TYPE
SYNTAX INTEGER(1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU classification profile ID"
::= { utsDot3Onu2CtcClassifiAppEntry 6 }
utsDot3OnuClassifiAppFieldId OBJECT-TYPE
SYNTAX INTEGER(1..120)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU classification rule ID"
::= { utsDot3Onu2CtcClassifiAppEntry 7 }
utsDot3OnuClassifiAppPrecedence OBJECT-TYPE
SYNTAX INTEGER(1..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Phy admin status"
::= { utsDot3Onu2CtcClassifiAppEntry 8 }
utsDot3OnuClassifiAppQueueMapped OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Queue mapped"
::= { utsDot3Onu2CtcClassifiAppEntry 9 }
utsDot3OnuClassifiAppPriMark OBJECT-TYPE
SYNTAX INTEGER(0..255) -- 0..7 for new priority, 255 for none
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ONU classification new priority"
::= { utsDot3Onu2CtcClassifiAppEntry 10 }
utsDot3OnuClassifiAppRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsDot3Onu2CtcClassifiAppEntry 11 }
-- Valid ONU MAC table
utsDot3Onu2CtcValidOnuMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcValidOnuMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 17 }
utsDot3Onu2CtcValidOnuMacEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcValidOnuMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 valid ONU MAC MIBs table."
INDEX { utsDot3OnuValidOnuMacModuleId,utsDot3OnuValidOnuMacDeviceId,
utsDot3OnuValidOnuMacPortId,utsDot3OnuValidOnuMacAppLPortId}
::= { utsDot3Onu2CtcValidOnuMacTable 1 }
UtsDot3Onu2CtcValidOnuMacEntry ::=
SEQUENCE {
utsDot3OnuValidOnuMacModuleId INTEGER,
utsDot3OnuValidOnuMacDeviceId INTEGER,
utsDot3OnuValidOnuMacPortId INTEGER,
utsDot3OnuValidOnuMacAppLPortId INTEGER,
utsDot3ValidOnuMacAddr MacAddress
}
utsDot3OnuValidOnuMacModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2CtcValidOnuMacEntry 1 }
utsDot3OnuValidOnuMacDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2CtcValidOnuMacEntry 2 }
utsDot3OnuValidOnuMacPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2CtcValidOnuMacEntry 3 }
utsDot3OnuValidOnuMacAppLPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2CtcValidOnuMacEntry 4 }
utsDot3ValidOnuMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Valid ONU MAC address"
::= { utsDot3Onu2CtcValidOnuMacEntry 5 }
-- EPM04B PON static FDB configurations
utsDot3Onu2StaticFDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2StaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 port MIBs."
::= { utsDot3OnuObjects 18 }
utsDot3Onu2StaticFDBEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2StaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 port MIBs table."
INDEX { utsDot3OnuStaticFDBModuleId, utsDot3OnuStaticFDBDeviceId,
utsDot3OnuStaticFDBPortId, utsDot3OnuStaticFDBLPortId}
::= { utsDot3Onu2StaticFDBTable 1 }
UtsDot3Onu2StaticFDBEntry ::=
SEQUENCE {
utsDot3OnuStaticFDBModuleId INTEGER,
utsDot3OnuStaticFDBDeviceId INTEGER,
utsDot3OnuStaticFDBPortId INTEGER,
utsDot3OnuStaticFDBLPortId INTEGER,
utsDot3OnuStaticFDBDstMacAddr MacAddress,
utsDot3OnuStaticFDBVlanId INTEGER,
utsDot3OnuStaticFDBEgressPort INTEGER,
utsDot3OnuStaticFDBFunction INTEGER,
utsDot3OnuStaticFDBRowStatus RowStatus
}
utsDot3OnuStaticFDBModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module ID"
::= { utsDot3Onu2StaticFDBEntry 1 }
utsDot3OnuStaticFDBDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device ID"
::= { utsDot3Onu2StaticFDBEntry 2 }
utsDot3OnuStaticFDBPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OLT PON port ID"
::= { utsDot3Onu2StaticFDBEntry 3 }
utsDot3OnuStaticFDBLPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Logical port ID"
::= { utsDot3Onu2StaticFDBEntry 4 }
utsDot3OnuStaticFDBDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address"
::= { utsDot3Onu2StaticFDBEntry 5 }
utsDot3OnuStaticFDBVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID"
::= { utsDot3Onu2StaticFDBEntry 6 }
utsDot3OnuStaticFDBEgressPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Egress port number"
::= { utsDot3Onu2StaticFDBEntry 7 }
utsDot3OnuStaticFDBFunction OBJECT-TYPE
SYNTAX INTEGER
{
staticForward(1), -- static entry for forwarding
filterSrcMac(2), -- static entry for source MAC filering
filterDstMac(3) -- static entry for source MAC filering
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static FBD entry function"
::= { utsDot3Onu2StaticFDBEntry 8 }
utsDot3OnuStaticFDBRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsDot3Onu2StaticFDBEntry 9 }
-- Display FDB table
-- EPM04B PON static FDB configurations
utsDot3Onu2FDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2FDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 port MIBs."
::= { utsDot3OnuObjects 19 }
utsDot3Onu2FDBEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2FDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 port MIBs table."
INDEX { utsDot3OnuFDBModuleId, utsDot3OnuFDBDeviceId,
utsDot3OnuFDBPortId, utsDot3OnuFDBLPortId, utsDot3OnuFDBIndex }
::= { utsDot3Onu2FDBTable 1 }
UtsDot3Onu2FDBEntry ::=
SEQUENCE {
utsDot3OnuFDBModuleId INTEGER,
utsDot3OnuFDBDeviceId INTEGER,
utsDot3OnuFDBPortId INTEGER,
utsDot3OnuFDBLPortId INTEGER,
utsDot3OnuFDBIndex INTEGER,
utsDot3OnuFDBDstMacAddr MacAddress,
utsDot3OnuFDBVlanId INTEGER,
utsDot3OnuFDBEgressPort OCTET STRING,
utsDot3OnuFDBStatus INTEGER
}
utsDot3OnuFDBModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module ID"
::= { utsDot3Onu2FDBEntry 1 }
utsDot3OnuFDBDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device ID"
::= { utsDot3Onu2FDBEntry 2 }
utsDot3OnuFDBLPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Logical port ID"
::= { utsDot3Onu2FDBEntry 3 }
utsDot3OnuFDBPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OLT PON port ID"
::= { utsDot3Onu2FDBEntry 4 }
utsDot3OnuFDBIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU FDB index"
::= { utsDot3Onu2FDBEntry 5 }
utsDot3OnuFDBDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address"
::= { utsDot3Onu2FDBEntry 6 }
utsDot3OnuFDBVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID"
::= { utsDot3Onu2FDBEntry 7 }
utsDot3OnuFDBEgressPort OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1)) -- from left to right, 0B1011... means port 1,3,4s
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Egress port map"
::= { utsDot3Onu2FDBEntry 8 }
utsDot3OnuFDBStatus OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1), -- the entry is no longer valid but not flushed yet
dynamic(2), -- dynamically learned
local(3), -- local port MAC address
static(4), -- statically added
igmpSnooping(5), -- via IGMP snooping
filterSrcMac(6), -- filtering by Dst MAC address
filterDstMac(7) -- filtering by Dst MAC address
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Egress port map"
::= { utsDot3Onu2FDBEntry 9 }
-- ONU classification rules
utsDot3Onu2CtcClassifiRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2CtcClassifiRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3OnuObjects 20 }
utsDot3Onu2CtcClassifiRuleEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2CtcClassifiRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu classification rule MIBs table."
INDEX { utsDot3OnuClassifiRuleProfId,utsDot3OnuClassifiRuleId}
::= { utsDot3Onu2CtcClassifiRuleTable 1 }
UtsDot3Onu2CtcClassifiRuleEntry ::=
SEQUENCE {
utsDot3OnuClassifiRuleProfId INTEGER,
utsDot3OnuClassifiRuleId INTEGER,
utsDot3OnuClassifiRuleBitMap OCTET STRING,
utsDot3OnuClassifiRuleDMacOper INTEGER,
utsDot3OnuClassifiRuleDMac MacAddress,
utsDot3OnuClassifiRuleDMac2 MacAddress,
utsDot3OnuClassifiRuleSMacOper INTEGER,
utsDot3OnuClassifiRuleSMac MacAddress,
utsDot3OnuClassifiRuleSMac2 MacAddress,
utsDot3OnuClassifiRulePriOper INTEGER,
utsDot3OnuClassifiRulePri INTEGER,
utsDot3OnuClassifiRulePri2 INTEGER,
utsDot3OnuClassifiRuleVlanOper INTEGER,
utsDot3OnuClassifiRuleVlanId INTEGER,
utsDot3OnuClassifiRuleVlanId2 INTEGER,
utsDot3OnuClassifiRuleTypeOper INTEGER,
utsDot3OnuClassifiRuleType INTEGER,
utsDot3OnuClassifiRuleType2 INTEGER,
-- utsDot3OnuClassifiRuleIpProtOper INTEGER,
-- utsDot3OnuClassifiRuleIpProt INTEGER,
utsDot3OnuClassifiRuleSIPOper INTEGER,
utsDot3OnuClassifiRuleSIP IpAddress,
utsDot3OnuClassifiRuleSIP2 IpAddress,
utsDot3OnuClassifiRuleDIPOper INTEGER,
utsDot3OnuClassifiRuleDIP IpAddress,
utsDot3OnuClassifiRuleDIP2 IpAddress,
utsDot3OnuClassifiRuleDSCPOper INTEGER,
utsDot3OnuClassifiRuleDSCP INTEGER,
utsDot3OnuClassifiRuleDSCP2 INTEGER,
utsDot3OnuClassifiRuleSPortOper INTEGER,
utsDot3OnuClassifiRuleSPort1 INTEGER,
utsDot3OnuClassifiRuleSPort2 INTEGER,
utsDot3OnuClassifiRuleDPortOper INTEGER,
utsDot3OnuClassifiRuleDPort1 INTEGER,
utsDot3OnuClassifiRuleDPort2 INTEGER,
utsDot3OnuClassifiRuleProtocolOper INTEGER,
utsDot3OnuClassifiRuleProtocol INTEGER,
utsDot3OnuClassifiRuleProtocol2 INTEGER
}
utsDot3OnuClassifiRuleProfId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Profile ID"
::= { utsDot3Onu2CtcClassifiRuleEntry 1 }
utsDot3OnuClassifiRuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rule index"
::= { utsDot3Onu2CtcClassifiRuleEntry 2 }
utsDot3OnuClassifiRuleBitMap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4)) -- from left to right
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Field selecting"
::= { utsDot3Onu2CtcClassifiRuleEntry 3 }
utsDot3OnuClassifiRuleDMacOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination MAC operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 4 }
utsDot3OnuClassifiRuleDMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination MAC address"
::= { utsDot3Onu2CtcClassifiRuleEntry 5 }
utsDot3OnuClassifiRuleDMac2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination MAC address 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 6 }
utsDot3OnuClassifiRuleSMacOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source MAC operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 7 }
utsDot3OnuClassifiRuleSMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source MAC address"
::= { utsDot3Onu2CtcClassifiRuleEntry 8 }
utsDot3OnuClassifiRuleSMac2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source MAC address 2 "
::= { utsDot3Onu2CtcClassifiRuleEntry 9 }
utsDot3OnuClassifiRulePriOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 10 }
utsDot3OnuClassifiRulePri OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority value"
::= { utsDot3Onu2CtcClassifiRuleEntry 11 }
utsDot3OnuClassifiRulePri2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority value 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 12 }
utsDot3OnuClassifiRuleVlanOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 13 }
utsDot3OnuClassifiRuleVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID"
::= { utsDot3Onu2CtcClassifiRuleEntry 14 }
utsDot3OnuClassifiRuleVlanId2 OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 15 }
utsDot3OnuClassifiRuleTypeOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 16 }
utsDot3OnuClassifiRuleType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type"
::= { utsDot3Onu2CtcClassifiRuleEntry 17 }
utsDot3OnuClassifiRuleType2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 18 }
utsDot3OnuClassifiRuleSIPOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source IP address operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 19 }
utsDot3OnuClassifiRuleSIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source IP address"
::= { utsDot3Onu2CtcClassifiRuleEntry 20 }
utsDot3OnuClassifiRuleSIP2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source IP address 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 21 }
utsDot3OnuClassifiRuleDIPOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP address operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 22 }
utsDot3OnuClassifiRuleDIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP address"
::= { utsDot3Onu2CtcClassifiRuleEntry 23 }
utsDot3OnuClassifiRuleDIP2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP address 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 24 }
utsDot3OnuClassifiRuleDSCPOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DSCP operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 25 }
utsDot3OnuClassifiRuleDSCP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DSCP"
::= { utsDot3Onu2CtcClassifiRuleEntry 26 }
utsDot3OnuClassifiRuleDSCP2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DSCP 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 27 }
utsDot3OnuClassifiRuleSPortOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source IP port operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 28 }
utsDot3OnuClassifiRuleSPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source port 1"
::= { utsDot3Onu2CtcClassifiRuleEntry 29 }
utsDot3OnuClassifiRuleSPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source port 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 30 }
utsDot3OnuClassifiRuleDPortOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP port operating"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 31 }
utsDot3OnuClassifiRuleDPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination port 1"
::= { utsDot3Onu2CtcClassifiRuleEntry 32 }
utsDot3OnuClassifiRuleDPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination port 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 33 }
utsDot3OnuClassifiRuleProtocolOper OBJECT-TYPE
SYNTAX INTEGER
{
eq(1),neq(2),ngt(3),nlt(4),ex(5),nex(6),range(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol operation"
DEFVAL{eq}
::= { utsDot3Onu2CtcClassifiRuleEntry 34 }
utsDot3OnuClassifiRuleProtocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol value"
::= { utsDot3Onu2CtcClassifiRuleEntry 35 }
utsDot3OnuClassifiRuleProtocol2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol value 2"
::= { utsDot3Onu2CtcClassifiRuleEntry 36 }
--
-- ACL Profile Import Configuration Table
--
utsDot3OnuClassifiImportTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuClassifiImportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of import classification profile information."
::= { utsDot3OnuObjects 21 }
utsDot3OnuClassifiImportEntry OBJECT-TYPE
SYNTAX UtsDot3OnuClassifiImportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in classification profile import table."
INDEX { utsDot3OnuClassifiImportClassId}
::= { utsDot3OnuClassifiImportTable 1 }
UtsDot3OnuClassifiImportEntry ::=
SEQUENCE {
utsDot3OnuClassifiImportClassId INTEGER,
utsDot3OnuClassifiImportFileName DisplayString,
utsDot3OnuClassifiImportStatus RowStatus
}
utsDot3OnuClassifiImportClassId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index to this classification profile import entry."
::= { utsDot3OnuClassifiImportEntry 1 }
utsDot3OnuClassifiImportFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The profile name associate with this classification profile import entry."
::= { utsDot3OnuClassifiImportEntry 2 }
utsDot3OnuClassifiImportStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The profile name associate with this classification profile import entry."
::= { utsDot3OnuClassifiImportEntry 3 }
-- ONU loopback group
utsDot3Onu2CtcLpBkGroup OBJECT IDENTIFIER ::= { utsDot3OnuObjects 22 }
utsDot3Onu2LpBkModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Module ID"
::= { utsDot3Onu2CtcLpBkGroup 1 }
utsDot3Onu2LpBkDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OLT device ID"
::= { utsDot3Onu2CtcLpBkGroup 2 }
utsDot3Onu2LpBkPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OLT port ID"
::= { utsDot3Onu2CtcLpBkGroup 3 }
utsDot3Onu2LpBkLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Logical port ID"
::= { utsDot3Onu2CtcLpBkGroup 4 }
utsDot3Onu2LpBkMode OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" loopback mode"
::= { utsDot3Onu2CtcLpBkGroup 5 }
utsDot3Onu2LpBkPacketSize OBJECT-TYPE
SYNTAX INTEGER(64..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loopback packet size"
::= { utsDot3Onu2CtcLpBkGroup 6 }
utsDot3Onu2LpBkPacketNum OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loopback packet number"
::= { utsDot3Onu2CtcLpBkGroup 7 }
utsDot3Onu2LpBkStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loopback test start or not"
::= { utsDot3Onu2CtcLpBkGroup 8 }
-- utsDot3Onu2LpBkEnd OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "loopback test stop or not"
-- ::= { utsDot3Onu2CtcLpBkGroup 9 }
utsDot3Onu2LpBkResult OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loopback test result, like:
Out of Seqance frames: 0
99 packets transmitted, 99 received, 0% packet loss
rtt min/avg/max = 0/0/0 ms"
::= { utsDot3Onu2CtcLpBkGroup 10 }
--
-- Selective QinQ Table, added by tomsong in 2008.7.21
--
utsDot3Onu2SelectiveQinQTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2SelectiveQinQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU Selective QinQ MIBs."
::= { utsDot3OnuObjects 23 }
utsDot3Onu2SelectiveQinQEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2SelectiveQinQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu Selective QinQ MIBs table."
INDEX { utsDot3OnuSelectiveQinQModuleId,utsDot3OnuSelectiveQinQDeviceId,utsDot3OnuSelectiveQinQPortId,utsDot3OnuSelectiveQinQLogicalPortId,utsDot3OnuSelectiveQinQEtherType,utsDot3OnuSelectiveQinQCos,utsDot3OnuSelectiveQinQStartCVID,utsDot3OnuSelectiveQinQEndCVID}
::= { utsDot3Onu2SelectiveQinQTable 1 }
UtsDot3Onu2SelectiveQinQEntry ::=
SEQUENCE {
utsDot3OnuSelectiveQinQModuleId INTEGER,
utsDot3OnuSelectiveQinQDeviceId INTEGER,
utsDot3OnuSelectiveQinQPortId INTEGER,
utsDot3OnuSelectiveQinQLogicalPortId INTEGER,
utsDot3OnuSelectiveQinQEtherType INTEGER,
utsDot3OnuSelectiveQinQCos INTEGER,
utsDot3OnuSelectiveQinQStartCVID INTEGER,
utsDot3OnuSelectiveQinQEndCVID INTEGER,
utsDot3OnuSelectiveQinQSVID INTEGER,
utsDot3OnuSelectiveQinQSCosSourceSelect INTEGER,
-- utsDot3OnuSelectiveQinQSTPID INTEGER,
utsDot3OnuSelectiveQinQSAppointCos INTEGER,
utsDot3OnuSelectiveQinQRowStatus RowStatus
}
utsDot3OnuSelectiveQinQModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2SelectiveQinQEntry 1 }
utsDot3OnuSelectiveQinQDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2SelectiveQinQEntry 2 }
utsDot3OnuSelectiveQinQPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2SelectiveQinQEntry 3 }
utsDot3OnuSelectiveQinQLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2SelectiveQinQEntry 4 }
utsDot3OnuSelectiveQinQEtherType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ethertype,eg,ARP - 0x0806, ECMA - 0x0803, IP - 0x0800, the value should be from
0x0 to 0xfffe, 0xffff means do not set this area,all match."
::= { utsDot3Onu2SelectiveQinQEntry 5 }
utsDot3OnuSelectiveQinQCos OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value should be from 0 to 8, 0 to 7 means in fact value in 802.1p, the 8 means do not care this area,all match."
::= { utsDot3Onu2SelectiveQinQEntry 6 }
utsDot3OnuSelectiveQinQStartCVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value should be from 0 to 4095, 0 to 4094 means in fact value in 802.1q, the 4095 means do not care this area,all match."
::= { utsDot3Onu2SelectiveQinQEntry 7 }
utsDot3OnuSelectiveQinQEndCVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value should be from 0 to 4095, 0 to 4094 means in fact value in 802.1q, the 4095 means do not care this area,all match."
::= { utsDot3Onu2SelectiveQinQEntry 8 }
utsDot3OnuSelectiveQinQSVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value should be from 0 to 4095."
::= { utsDot3Onu2SelectiveQinQEntry 9 }
utsDot3OnuSelectiveQinQSCosSourceSelect OBJECT-TYPE
SYNTAX INTEGER
{
copyfromctag(1), -- the STAG Cos is copy from CTAG Cos
usingappointnewvalue(2) -- the STAG Cos is using the appint value from configuration
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The STAG Cos Source Select."
::= { utsDot3Onu2SelectiveQinQEntry 10 }
--utsDot3OnuSelectiveQinQSTPID OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The TPID for STAG, the 0xFFFF means do not adpot this value in the packet, using the system define TPID value or default TPID value."
-- ::= { utsDot3Onu2SelectiveQinQEntry 10 }
utsDot3OnuSelectiveQinQSAppointCos OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Cos for STAG when source select is usingappointnewvalue in utsDot3OnuSelectiveQinQSCosSourceSelect, the value shoud be from 0 to 7."
::= { utsDot3Onu2SelectiveQinQEntry 11 }
utsDot3OnuSelectiveQinQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the current entry. "
::= { utsDot3Onu2SelectiveQinQEntry 12 }
-- unbound ONU table
--
utsDot3UnboundOnuObjects OBJECT IDENTIFIER ::= { utsDot3OnuMIB 2}
utsDot3UnboundOnuTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3UnboundOnuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU MIBs."
::= { utsDot3UnboundOnuObjects 1 }
utsDot3UnboundOnuEntry OBJECT-TYPE
SYNTAX UtsDot3UnboundOnuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu MIBs table."
INDEX { utsDot3UnboundOnuModuleId, utsDot3UnboundOnuPortId, utsDot3UnboundOnuLlid }
::= { utsDot3UnboundOnuTable 1 }
UtsDot3UnboundOnuEntry ::=
SEQUENCE {
utsDot3UnboundOnuModuleId INTEGER,
utsDot3UnboundOnuPortId INTEGER,
utsDot3UnboundOnuLlid INTEGER,
utsDot3UnboundOnuPonMacAddr MacAddress
}
utsDot3UnboundOnuModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3UnboundOnuEntry 1 }
utsDot3UnboundOnuPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3UnboundOnuEntry 2 }
utsDot3UnboundOnuLlid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the LLID for the current ONU."
::= { utsDot3UnboundOnuEntry 3 }
utsDot3UnboundOnuPonMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the Mac Address for the current ONU."
::= { utsDot3UnboundOnuEntry 4 }
--
-- ONU switch management table
--
utsDot3OnuSwitchObjects OBJECT IDENTIFIER ::= { utsDot3OnuMIB 3}
utsDot3OnuSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU Switch MIBs."
::= { utsDot3OnuSwitchObjects 1 }
utsDot3OnuSwitchEntry OBJECT-TYPE
SYNTAX UtsDot3OnuSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu switch MIBs table."
INDEX { utsDot3OnuSwitchModuleId, utsDot3OnuSwitchPortId, utsDot3OnuSwitchOnuId }
::= { utsDot3OnuSwitchTable 1 }
UtsDot3OnuSwitchEntry ::=
SEQUENCE {
utsDot3OnuSwitchModuleId INTEGER,
utsDot3OnuSwitchPortId INTEGER,
utsDot3OnuSwitchOnuId INTEGER,
utsDot3OnuSwitchMngStatus INTEGER,
utsDot3OnuSwitchIpAddress IpAddress,
utsDot3OnuSwtichType INTEGER,
utsDot3OnuSwitchFirmwareVer OCTET STRING,
utsDot3OnuSwitchMacAddr MacAddress,
utsDot3OnuSwitchMngVlan INTEGER,
utsDot3OnuSwitchRowStatus RowStatus
}
utsDot3OnuSwitchModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3OnuSwitchEntry 1 }
utsDot3OnuSwitchPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3OnuSwitchEntry 2 }
utsDot3OnuSwitchOnuId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read only value to identifiy the ONU ID for the current ONU."
::= { utsDot3OnuSwitchEntry 3 }
utsDot3OnuSwitchMngStatus OBJECT-TYPE
SYNTAX INTEGER
{
autoConfigured(1), -- IP assigned by DHCP
manualConfigured(2) -- IP manual configured
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Entry status for management."
::= { utsDot3OnuSwitchEntry 4 }
utsDot3OnuSwitchIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ONU Switch IP address, if manual configured, a host route should be added for this IP"
::= { utsDot3OnuSwitchEntry 5 }
utsDot3OnuSwtichType OBJECT-TYPE
SYNTAX INTEGER
{
onu100(1),
onu1000B(2),
onu1000C(3),
onu200A(4),
onu200B(5),
onu2024(6),
onu2004(7),
onu101K(8),
onu301(9),
onu301C(10),
onu404(11),
onu404C(12),
onu804(13),
onu804C(14),
onu1001C(15),
onu3004(16),
onu1001i(17),
onu2004i(18),
onu404i(19),
clt2060(20),
onu204i(21),
onu208i(22),
onu204h(23),
onu408t(24),
onu2024i(25),
onub210(26),
onu1001h(27),
onub220(28),
onu804i(29),
onu101(30),
onu1001b(31),
onu2004h(32),
onu204d(33),
onu404t(34),
onu4024t(35),
onu4024i(36),
onu101i(38),
onub1205y(39),
onub1205d(40),
onub130(41),
tkOnu(100),
pmcOnu(101),
unknow(200)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU Switch MAC address"
::= { utsDot3OnuSwitchEntry 6 }
utsDot3OnuSwitchFirmwareVer OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU Switch Firmware version"
::= { utsDot3OnuSwitchEntry 7 }
utsDot3OnuSwitchMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU Switch MAC address"
::= { utsDot3OnuSwitchEntry 8 }
utsDot3OnuSwitchMngVlan OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ONU Switch management VLAN"
::= { utsDot3OnuSwitchEntry 9 }
utsDot3OnuSwitchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of this entry"
::= { utsDot3OnuSwitchEntry 10 }
------
------ 3. ONU OAM
------
utsDot3OnuOamMIB OBJECT IDENTIFIER ::= { utsEponConfExtObjects 3}
utsDot3OnuOamObjects OBJECT IDENTIFIER ::= { utsDot3OnuOamMIB 1}
utsDot3OnuOamTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuOamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU OAM MIBs."
::= { utsDot3OnuOamObjects 1 }
utsDot3OnuOamEntry OBJECT-TYPE
SYNTAX UtsDot3OnuOamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu OAM MIBs table."
INDEX { ifIndex }
::= { utsDot3OnuOamTable 1 }
UtsDot3OnuOamEntry ::=
SEQUENCE {
utsDot3OnuOAMModuleId INTEGER,
utsDot3OnuOAMPortId INTEGER,
utsDot3OnuOAMLogicalPortId INTEGER,
utsDot3OnuOAMMode INTEGER,
utsDot3OnuOAMDeviceIdentifier INTEGER,
utsDot3OnuOAMVersionIdentifier INTEGER,
utsDot3OnuOAMLinktestTotalFrame INTEGER,
utsDot3OnuOAMLinktestFrameSize INTEGER,
utsDot3OnuOAMLinktestDelayMeasureEnable TruthValue,
utsDot3OnuOAMLinktestVLANTagEnable TruthValue,
utsDot3OnuOAMLinktestVLANTagPriority INTEGER,
utsDot3OnuOAMLinktestVLANTagVID INTEGER,
utsDot3OnuOAMLinktestFrameSent INTEGER,
utsDot3OnuOAMLinktestFrameReceived INTEGER,
utsDot3OnuOAMLinktestErrFrameReceived INTEGER,
utsDot3OnuOAMLinktestMinDelay INTEGER,
utsDot3OnuOAMLinktestMeanDelay INTEGER,
utsDot3OnuOAMLinktestMaxDelay INTEGER,
-- utsDot3OnuOAMPingStart TruthValue,
utsDot3OnuOAMPingElapsedTime INTEGER,
utsDot3OnuOAMPortState INTEGER,
utsDot3OnuOAMStartTest INTEGER,
utsDot3OnuOAMLinkTestStatus UtsConfStatusType,
utsDot3OnuOAMLinkTestStationId UtsConfStationIdType,
utsDot3OnuOAMLinkTestResultStr DisplayString,
utsDot3OnuOAMPingStatus UtsConfStatusType,
utsDot3OnuOAMPingStationId UtsConfStationIdType,
utsDot3OnuOAMPingResultStr DisplayString
-- utsDot3OnuOAMLoopbackStatus UtsConfStatusType,
-- utsDot3OnuOAMLinktestStatus UtsConfStatusType,
-- utsDot3OnuOAMPingStatus UtsConfStatusType,
-- utsDot3OnuOAMLinktestStationId UtsConfStationIdType,
-- utsDot3OnuOAMPingStationId UtsConfStationIdType,
-- utsDot3OnuOAMLoopbackStationId UtsConfStationIdType
}
utsDot3OnuOAMModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identify OLT module id"
::= { utsDot3OnuOamEntry 1 }
utsDot3OnuOAMPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identify OLT port id"
::= { utsDot3OnuOamEntry 2 }
utsDot3OnuOAMLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identify ONU logical port id"
::= { utsDot3OnuOamEntry 3 }
utsDot3OnuOAMMode OBJECT-TYPE
SYNTAX INTEGER {
passive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OAM mode. Only supports active(2)"
::= { utsDot3OnuOamEntry 4 }
utsDot3OnuOAMDeviceIdentifier OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Vendor products identifier."
::= { utsDot3OnuOamEntry 9 }
utsDot3OnuOAMVersionIdentifier OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifier which distinguishes between versions of a particular vendor
product. In a case of Passave ONU - ONU Hardware major version."
::= { utsDot3OnuOamEntry 10 }
utsDot3OnuOAMLinktestTotalFrame OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of frames to be sent during link test.
0 -- stop link test operation,
other -- number of link test frame to be sent."
::= { utsDot3OnuOamEntry 23 }
utsDot3OnuOAMLinktestFrameSize OBJECT-TYPE
SYNTAX INTEGER (60..1514)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Measurement frames data size, measured in bytes. Not including
Preamble, SFD, and FCS. 60 - 1514."
::= { utsDot3OnuOamEntry 24 }
utsDot3OnuOAMLinktestDelayMeasureEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link test includes delay measurement, which corresponds to the difference
between sent and received times (including granting delay and firmware
processing time overheads)."
::= { utsDot3OnuOamEntry 25 }
utsDot3OnuOAMLinktestVLANTagEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable VLAN tag in link test frames."
::= { utsDot3OnuOamEntry 26 }
utsDot3OnuOAMLinktestVLANTagPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority in VLAN tag. 0 - 7."
::= { utsDot3OnuOamEntry 27 }
utsDot3OnuOAMLinktestVLANTagVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID in VLAN tag. 0 - 4094."
::= { utsDot3OnuOamEntry 28 }
utsDot3OnuOAMLinktestFrameSent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of measurement frames sent during the test."
::= { utsDot3OnuOamEntry 29 }
utsDot3OnuOAMLinktestFrameReceived OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of measurement frames including error frames received during the test."
::= { utsDot3OnuOamEntry 30 }
utsDot3OnuOAMLinktestErrFrameReceived OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of measurement error frames received during the test."
::= { utsDot3OnuOamEntry 31 }
utsDot3OnuOAMLinktestMinDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimal delay collected from link delay measurements measured in TQ units.
Relevant only if link delay measurement is enabled and the test is completed
within current command."
::= { utsDot3OnuOamEntry 32 }
utsDot3OnuOAMLinktestMeanDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean delay collected from link delay measurements measured in TQ units.
Relevant only if link delay measurement is enabled and the test is completed
within current command."
::= { utsDot3OnuOamEntry 33 }
utsDot3OnuOAMLinktestMaxDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal delay collected from link delay measurements measured in TQ units.
Relevant only if link delay measurement is enabled and the test is completed
within current command."
::= { utsDot3OnuOamEntry 34 }
-- utsDot3OnuOAMPingStart OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Start ping with PAS-SOFT simulates ping data (60 bytes)."
-- ::= { utsDot3OnuOamEntry 35 }
utsDot3OnuOAMPingElapsedTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Ping time, not including PAS_SOFT overhead. Measured in Milliseconds.
-1 - timeout, 0 - below time measurement resolution, 1-32767 - Total Ping time."
::= { utsDot3OnuOamEntry 36 }
utsDot3OnuOAMPortState OBJECT-TYPE
SYNTAX INTEGER {
onuOAMOk (1),
onuOAMnotRunning(2) -- ONU is not OK or not attched
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the ONU state is OK or not."
::= { utsDot3OnuOamEntry 37 }
utsDot3OnuOAMStartTest OBJECT-TYPE
SYNTAX INTEGER {
onuloopbacktest(1),
onulinktest(2),
onupingtest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write corresponding value to this variable will start the corresponding
Onu OAM test."
::= { utsDot3OnuOamEntry 38 }
utsDot3OnuOAMLinkTestStatus OBJECT-TYPE
SYNTAX UtsConfStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Onu OAM Link Test status"
::= { utsDot3OnuOamEntry 39 }
utsDot3OnuOAMLinkTestStationId OBJECT-TYPE
SYNTAX UtsConfStationIdType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Station id, a string used to identify the issuer of Link Test."
::= { utsDot3OnuOamEntry 40 }
utsDot3OnuOAMLinkTestResultStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that describes the result of OAM Link Test."
::= { utsDot3OnuOamEntry 41 }
utsDot3OnuOAMPingStatus OBJECT-TYPE
SYNTAX UtsConfStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Onu OAM Test status"
::= { utsDot3OnuOamEntry 42 }
utsDot3OnuOAMPingStationId OBJECT-TYPE
SYNTAX UtsConfStationIdType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Station id, a string used to identify the issuer of OAM Ping Test."
::= { utsDot3OnuOamEntry 43 }
utsDot3OnuOAMPingResultStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that describes the result of OAM Ping Test."
::= { utsDot3OnuOamEntry 44 }
------
------ 4. DBA
------
utsDot3DbaMIB OBJECT IDENTIFIER ::= { utsEponConfExtObjects 4}
utsDot3DbaOltObjects OBJECT IDENTIFIER ::= { utsDot3DbaMIB 1}
utsDot3DbaOltTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3DbaOltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 Dba MIBs."
::= { utsDot3DbaOltObjects 1 }
utsDot3DbaOltEntry OBJECT-TYPE
SYNTAX UtsDot3DbaOltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Dba MIBs table."
INDEX { ifIndex }
::= { utsDot3DbaOltTable 1 }
UtsDot3DbaOltEntry ::=
SEQUENCE
{
utsDot3DbaOltModuleId INTEGER,
utsDot3DbaOltPortId INTEGER,
utsDot3DbaOltAlgorithm INTEGER,
utsDot3DbaOltDiscoverySize INTEGER,
utsDot3DbaOltDiscoveryFreq INTEGER,
utsDot3DbaOltCycleSize INTEGER,
utsDot3DbaOltPlatoCycleSize INTEGER,
utsDot3DbaOltPlatoDiscoveryFreq INTEGER
}
utsDot3DbaOltModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identidy OLT module id"
::= { utsDot3DbaOltEntry 1 }
utsDot3DbaOltPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identidy OLT port id"
::= { utsDot3DbaOltEntry 2 }
utsDot3DbaOltAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
internalEqualShare(1),
-- aristotle(2),
-- thales(3),
-- socrates(4),
plato(5)
-- vendorExtension1(6),
-- vendorExtension2(7),
-- vendorExtension3(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DBA algorithm for specific OLT. Select 'internalEqualShare' can also be used to stop
any other external DBA algorithms. For now, only internalEqualShare(1) and plato(5) supported"
::= { utsDot3DbaOltEntry 3 }
utsDot3DbaOltDiscoverySize OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovery grant length. Default value is 1792 (0x700) TQ."
::= { utsDot3DbaOltEntry 4 }
utsDot3DbaOltDiscoveryFreq OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"How often the OLT should send discovery frames to the ONUs, measured in
grant cycles. Default value is 500."
::= { utsDot3DbaOltEntry 5 }
utsDot3DbaOltCycleSize OBJECT-TYPE
SYNTAX INTEGER (16384..131072)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Grant cycle size, measured in TQ. The default value is 0x50000.
For PLATO version 2.0 or above, this paramter is not configurable."
::= { utsDot3DbaOltEntry 6 }
utsDot3DbaOltPlatoCycleSize OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PLATO Grant cycle size, measured in 50us. only used when dba algorithm is plato,
and default value is 10. For PLATO version 2.0 or above, this paramter is not configurable."
::= { utsDot3DbaOltEntry 7 }
utsDot3DbaOltPlatoDiscoveryFreq OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"How often the OLT should send discovery frames to the ONUs when olt use plato dba algorithm, measured in
grant cycles. Default value is 50."
::= { utsDot3DbaOltEntry 8 }
--
--dba sla
--
utsDot3DbaSlaObjects OBJECT IDENTIFIER ::= { utsDot3DbaMIB 2}
utsDot3DbaSlaTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3DbaSlaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU SLA MIBs."
::= { utsDot3DbaSlaObjects 1 }
utsDot3DbaSlaEntry OBJECT-TYPE
SYNTAX UtsDot3DbaSlaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 DBA MIBs table."
INDEX { ifIndex }
::= { utsDot3DbaSlaTable 1 }
UtsDot3DbaSlaEntry ::=
SEQUENCE
{
utsDot3DbaSlaModuleId INTEGER,
utsDot3DbaSlaPortId INTEGER,
utsDot3DbaSlaLogicalPortId INTEGER,
utsDot3DbaSlaUpCommittedBandwidth INTEGER,
utsDot3DbaSlaUpMaxBandwidth INTEGER,
-- utsDot3DbaSlaMaxBurstSize INTEGER,
utsDot3DbaSlaVLANID INTEGER,
utsDot3DbaSlaUNIMaxMACAddress INTEGER,
utsDot3DbaSlaIPAddress IpAddress,
utsDot3DbaSlaSubnetMask IpAddress,
utsDot3DbaSlaCallingStationId OCTET STRING,
utsDot3DbaSlaPlatoClass INTEGER,
utsDot3DbaSlaBindingMacAddress MacAddress,
utsDot3DbaSlaDownPolicingEnable INTEGER,
utsDot3DbaSlaDownMaxBandwidth INTEGER,
utsDot3DbaSlaDownMaxBurstSize INTEGER,
-- utsDot3DbaSlaDownHiPriFramePref INTEGER,
-- utsDot3DbaSlaDownShortFramePref INTEGER,
utsDot3DbaSlaP2PPolicingEnable INTEGER,
utsDot3DbaSlaP2PPolicingONUList OCTET STRING,
utsDot3DbaSlaP2PMaxBandwidth INTEGER,
utsDot3DbaSlaP2PMaxBurstSize INTEGER
-- utsDot3DbaSlaP2PHiPriFramePref INTEGER,
-- utsDot3DbaSlaP2PShortFramePref INTEGER
}
utsDot3DbaSlaModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identify module ID of the LTM module of the EPON device to which an ONU should be attached."
::= { utsDot3DbaSlaEntry 1 }
utsDot3DbaSlaPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identify port number of the OLT of the LTM module of the EPON device to which an ONU should
be attached."
::= { utsDot3DbaSlaEntry 2 }
utsDot3DbaSlaLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identify logical port number of an ONU when it's attached to an OLT."
::= { utsDot3DbaSlaEntry 3 }
utsDot3DbaSlaUpCommittedBandwidth OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed bandwidth for a specific ONU/LLID measured in terms of Kbps, it
will be converted into TQ internally. It will be used to control upstream bandwidth."
::= { utsDot3DbaSlaEntry 4 }
utsDot3DbaSlaUpMaxBandwidth OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximal bandwidth for a specific ONU/LLID measured in terms of Kbps, it
will be converted into TQ internally. It will be used to control upstream bandwidth."
::= { utsDot3DbaSlaEntry 5 }
utsDot3DbaSlaVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of an ONU when it's attached to an OLT, writable in layer-2 mode, read-only in layer-3 mode."
::= { utsDot3DbaSlaEntry 13 }
utsDot3DbaSlaUNIMaxMACAddress OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum allowed number of MAC addresses that can be attached to an ONU's UNI.
One of the following values: 1-16,30, 62, 126, 254, 8190.
when set to 8190, it means to remove the MAC address limitation."
DEFVAL { 8190 }
::= { utsDot3DbaSlaEntry 14 }
utsDot3DbaSlaIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address to be assigned to the device attached to an ONU's UNI."
::= { utsDot3DbaSlaEntry 17 }
utsDot3DbaSlaSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subnet mask to be assigned to the device attached to an ONU's UNI."
::= { utsDot3DbaSlaEntry 18 }
utsDot3DbaSlaCallingStationId OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calling station id of an ONU. It may include MAC address plus serial number.
UNI."
::= { utsDot3DbaSlaEntry 23 }
utsDot3DbaSlaPlatoClass OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority of the traffic of an ONU when using plato DBA algorithm."
::= { utsDot3DbaSlaEntry 24 }
utsDot3DbaSlaBindingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the MacAddress of the onu binded to this logic link id."
::= { utsDot3DbaSlaEntry 25 }
-- Down stream policing
utsDot3DbaSlaDownPolicingEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable down stream policing."
::= { utsDot3DbaSlaEntry 26 }
utsDot3DbaSlaDownMaxBandwidth OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum bandwidth allowed(1000000 Kbps for M3, 500,000 Kbps for M4) for the ONU, Kbits/ Sec."
::= { utsDot3DbaSlaEntry 27 }
utsDot3DbaSlaDownMaxBurstSize OBJECT-TYPE
SYNTAX INTEGER (0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximal number of bytes in a burst, measured in KBytes. The value is truncated to
the nearest smaller 128bytes multiple value. default value 256"
::= { utsDot3DbaSlaEntry 28 }
-- utsDot3DbaSlaDownHiPriFramePref OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Disable or Enable high priority frames preference."
-- ::= { utsDot3DbaSlaEntry 29 }
-- utsDot3DbaSlaDownShortFramePref OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Disable or enable short frames preference."
-- ::= { utsDot3DbaSlaEntry 30 }
-- P2P stream policing, Zhaoxf added on Dec 25, 2005
utsDot3DbaSlaP2PPolicingEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable P2P stream policing."
::= { utsDot3DbaSlaEntry 36 }
utsDot3DbaSlaP2PPolicingONUList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ONU logical port list, excluding the current port itself.
The ONU list bitmap from left to right indicates ONU logical
port 1..64."
::= { utsDot3DbaSlaEntry 37 }
utsDot3DbaSlaP2PMaxBandwidth OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum bandwidth allowed(1000000 Kbps for M3, 500,000 Kbps for M4) for the ONU, Kbits/ Sec."
::= { utsDot3DbaSlaEntry 38 }
utsDot3DbaSlaP2PMaxBurstSize OBJECT-TYPE
SYNTAX INTEGER (0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximal number of bytes in a burst, measured in KBytes. The value is truncated to
the nearest smaller 128 bytes multiple value. default value 256"
::= { utsDot3DbaSlaEntry 39 }
--utsDot3DbaSlaP2PHiPriFramePref OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Disable or Enable high priority frames preference."
-- ::= { utsDot3DbaSlaEntry 40 }
-- utsDot3DbaSlaP2PShortFramePref OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Disable or enable short frames preference."
-- ::= { utsDot3DbaSlaEntry 41 }
------
------ 6. VLAN & LLID
------
utsDot3OnuVlanMIB OBJECT IDENTIFIER ::= { utsEponConfExtObjects 6}
-- remove onu vlan table temporarily
--utsDot3OnuVlanObjects OBJECT IDENTIFIER ::= { utsDot3OnuVlanMIB 1}
--
--utsDot3OnuVlanTable OBJECT-TYPE
--SYNTAX SEQUENCE OF UtsDot3OnuVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"Table for dot3 ONU Vlan MIBs."
-- ::= { utsDot3OnuVlanObjects 1 }
--
--utsDot3OnuVlanEntry OBJECT-TYPE
--SYNTAX UtsDot3OnuVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"An entry in the dot3 PLT MIBs table."
-- INDEX { ifIndex }
-- ::= { utsDot3OnuVlanTable 1 }
--
--UtsDot3OnuVlanEntry ::=
-- SEQUENCE {
-- utsDot3OnuVlanModuleId INTEGER,
-- utsDot3OnuVlanPortId INTEGER,
-- utsDot3OnuVlanLogicalPortId INTEGER,
-- utsDot3OnuVlanMode INTEGER,
-- utsDot3OnuVlanExchangeTagUpLink INTEGER,
-- utsDot3OnuVlanExchangeTagDnLinkSuffix INTEGER,
-- utsDot3OnuVlanStackTag INTEGER,
-- utsDot3OnuVlanStackNestedMode TruthValue,
-- utsDot3OnuVlanStackNestedModeVlanType INTEGER
-- }
--
--
--utsDot3OnuVlanModuleId OBJECT-TYPE
--SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"A read only value to identify OLT module id for the attached ONU"
-- ::= { utsDot3OnuVlanEntry 1 }
--
--utsDot3OnuVlanPortId OBJECT-TYPE
--SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"A read only value to identify OLT port id for the attached ONU"
-- ::= { utsDot3OnuVlanEntry 2 }
--
--utsDot3OnuVlanLogicalPortId OBJECT-TYPE
--SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"A read only value to identify ONU logical id. "
-- ::= { utsDot3OnuVlanEntry 3 }
--
--utsDot3OnuVlanMode OBJECT-TYPE
--SYNTAX INTEGER {
-- unchange(0),
-- exchange(1),
-- stack(2)
--}
--
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Handling mode for LLID and VLAN tag. unchange - LLID frames (which may
--contain VLAN tags) are passed unchanged both in downlink and in uplink;
--exchange - LLID frames?VLAN tags are exchanged; stack - LLID frames?VLAN tags are stacked."
-- ::= { utsDot3OnuVlanEntry 4 }
--
--utsDot3OnuVlanExchangeTagUpLink OBJECT-TYPE
--SYNTAX INTEGER (0..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"VLAN tag id, applied to exchange handling mode."
-- ::= { utsDot3OnuVlanEntry 5 }
--
--utsDot3OnuVlanExchangeTagDnLinkSuffix OBJECT-TYPE
--SYNTAX INTEGER (0..15)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"VLAN tag suffix id used as downlink exchanged tag suffix. The final tag is composed
--of utsDot3OltVlanTagExchangeDnLinkPrefix (8 MSB bits) and
--utsDot3OnuVlanExchangeTagDnLinkSuffix (4 LSB bits). It's applied to exchange
--handling mode."
-- ::= { utsDot3OnuVlanEntry 6 }
--
--utsDot3OnuVlanStackTag OBJECT-TYPE
--SYNTAX INTEGER (0..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Stacked VLAN tag id for both uplink and downlink traffic, applied to stack
--handling mode."
-- ::= { utsDot3OnuVlanEntry 7 }
--
--utsDot3OnuVlanStackNestedMode OBJECT-TYPE
--SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"TRUE - Nested mode - Tag adding to every frame, tagged or untagged. VLAN tag
--is removed from downlink tagged frames with tag equal to utsDot3OnuVlanStackTag;
--FALSE - Service mode - Tag adding to untagged frames only, VLAN tag is removed
--from every downlink tagged frames. It's applied to stack handling mode."
-- ::= { utsDot3OnuVlanEntry 8 }
--
--utsDot3OnuVlanStackNestedModeVlanType OBJECT-TYPE
--SYNTAX INTEGER {
-- vlanType8100H(0),
-- vlanType9100H(1),
-- vlanTypeOther(2)
--}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Nested VLAN type. It's valid only if stack handling mode is selected and
--utsDot3OnuVlanStackNestedMode is TRUE. utsDot3OltVlanStackNestedModeVlanType will
--be used if utsDot3OnuVlanStackNestedModeVlanType is vlanTypeOther."
-- ::= { utsDot3OnuVlanEntry 9 }
-- ===========================================================================
--
-- ONU Firmware Upgrade Table
--
-- ===========================================================================
utsDot3OnuUpgradeMIB OBJECT IDENTIFIER ::= { utsEponConfExtObjects 7}
utsDot3OnuUpgradeStateObjects OBJECT IDENTIFIER ::= { utsDot3OnuUpgradeMIB 1 }
utsDot3OnuUpgradePortListGroup OBJECT IDENTIFIER ::= { utsDot3OnuUpgradeStateObjects 1 }
utsDot3OnuUpgradeManualPortListStateBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Onu firmware upgrade olt port list bit map. BBS1000 has 8 olt ports.
Each olt port can connect up to 32 onu device. The olt port bit map
defined as following port 1,2,3,....8....256
To include a port in manual upgrade set the correponding bit to 1."
::= { utsDot3OnuUpgradePortListGroup 1 }
utsDot3OnuUpgradeSchedulePortListStateBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Onu firmware upgrade olt port list bit map. BBS1000 has 8 olt ports.
Each olt port can connect up to 32 onu device. The port bit map
defined as following port 1,2,3,....256.
To include a port in schedule upgrade set the correponding bit to 1"
::= { utsDot3OnuUpgradePortListGroup 2 }
utsDot3OnuUpgradeForceManualPortListBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Onu firmware upgrade olt port list bit map. BBS1000 has 8 olt ports.
Each olt port can connect up to 32 onu device. The olt port bit map
defined as following port 1,2,3,....8....256. Force upgrade without revision checking.
To include a port in force manual upgrade set the correponding bit to 1."
::= { utsDot3OnuUpgradePortListGroup 3 }
utsDot3OnuUpgradeNormalManualPortListBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Onu firmware upgrade olt port list bit map. BBS1000 has 8 olt ports.
Each olt port can connect up to 32 onu device. The olt port bit map
defined as following port 1,2,3,....8....256. Normal upgrade with revision checking.
To include a port in normal manual upgrade set the correponding bit to 1."
::= { utsDot3OnuUpgradePortListGroup 4 }
--
-- Hardware type configuration
--
utsDot3OnuHwTypeUpgradeObjects OBJECT IDENTIFIER ::= { utsDot3OnuUpgradeMIB 2}
utsDot3OnuHwTypeUpgradeTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuHwTypeUpgradeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Onu hardware information"
::= { utsDot3OnuHwTypeUpgradeObjects 1}
utsDot3OnuHwTypeUpgradeEntry OBJECT-TYPE
SYNTAX UtsDot3OnuHwTypeUpgradeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains Onu hardware upgrade information"
INDEX { utsDot3OnuHwTypeUpgradeHwType, utsDot3OnuHwTypeUpgradeMethod, utsDot3OnuHwTypeUpgradeComponent}
::= { utsDot3OnuHwTypeUpgradeTable 1}
UtsDot3OnuHwTypeUpgradeEntry ::=
SEQUENCE {
utsDot3OnuHwTypeUpgradeHwType INTEGER,
utsDot3OnuHwTypeUpgradeMethod INTEGER,
utsDot3OnuHwTypeUpgradeHwRev DisplayString,
utsDot3OnuHwTypeUpgradeFwRev DisplayString,
utsDot3OnuHwTypeUpgradeImageName DisplayString,
utsDot3OnuHwTypeUpgradeStatus RowStatus,
utsDot3OnuHwTypeUpgradeComponent INTEGER
}
utsDot3OnuHwTypeUpgradeHwType OBJECT-TYPE
SYNTAX INTEGER
{
onu100(1),
onu1000B(2),
onu1000C(3),
onu200A(4),
onu200B(5),
onu2024(6),
onu2004(7),
onu101K(8),
onu301(9),
onu301C(10),
onu404(11),
onu404C(12),
onu804(13),
onu804C(14),
onu1001C(15),
onu3004(16),
onu1001i(17),
onu2004i(18),
onu404i(19),
clt2060(20),
onu204i(21),
onu208i(22),
onu204h(23),
onu408t(24),
onu2024i(25),
onub210(26),
onu1001h(27),
onub220(28),
onu804i(29),
onu101(30),
onu1001b(31),
onu2004h(32),
onu204d(33),
onu404t(34),
onu4024t(35),
onu4024i(36),
onu101i(38),
onub1205y(39),
onub1205d(40),
onub130(41),
tkOnu(100),
pmcOnu(101),
unknow(200)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"onu model which need firmware upgrade"
::= { utsDot3OnuHwTypeUpgradeEntry 1 }
utsDot3OnuHwTypeUpgradeMethod OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
scheduled(2),
auto(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade method (manual or scheduled)"
::= { utsDot3OnuHwTypeUpgradeEntry 2 }
utsDot3OnuHwTypeUpgradeHwRev OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade hardware revision"
::= { utsDot3OnuHwTypeUpgradeEntry 3 }
utsDot3OnuHwTypeUpgradeFwRev OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade firmware revision"
::= { utsDot3OnuHwTypeUpgradeEntry 4 }
utsDot3OnuHwTypeUpgradeImageName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade Image Name"
::= { utsDot3OnuHwTypeUpgradeEntry 5 }
utsDot3OnuHwTypeUpgradeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade hardware entry status"
::= { utsDot3OnuHwTypeUpgradeEntry 6 }
utsDot3OnuHwTypeUpgradeComponent OBJECT-TYPE
SYNTAX INTEGER
{
onu-pon-firmware(1),
onu-switch-firmware(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the component in Onu which need firmware upgrade"
::= { utsDot3OnuHwTypeUpgradeEntry 7 }
--
-- Onu FW Upgrade
--
utsDot3OnuFWUpgradeObjects OBJECT IDENTIFIER ::= { utsDot3OnuUpgradeMIB 3}
utsDot3OnuFWUpgradeScheduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuFWUpgradeScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Onu firmware information"
::= { utsDot3OnuFWUpgradeObjects 1}
utsDot3OnuFWUpgradeScheduleEntry OBJECT-TYPE
SYNTAX UtsDot3OnuFWUpgradeScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains scheduled Onu firmware upgrade information"
INDEX { utsDot3OnuFWUpgradeStartingHour, utsDot3OnuFWUpgradeStartingMinute }
::= { utsDot3OnuFWUpgradeScheduleTable 1}
UtsDot3OnuFWUpgradeScheduleEntry ::=
SEQUENCE {
utsDot3OnuFWUpgradeStartingHour INTEGER,
utsDot3OnuFWUpgradeStartingMinute INTEGER,
utsDot3OnuFWUpgradeDuration INTEGER,
utsDot3OnuFWUpgradePortListBitMap OCTET STRING,
utsDot3OnuFWUpgradeOption INTEGER,
utsDot3OnuFWUpgradeRowStatus RowStatus
}
utsDot3OnuFWUpgradeStartingHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade schedule starting hour."
::= { utsDot3OnuFWUpgradeScheduleEntry 1}
utsDot3OnuFWUpgradeStartingMinute OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade schedule starting minute."
::= { utsDot3OnuFWUpgradeScheduleEntry 2}
utsDot3OnuFWUpgradeDuration OBJECT-TYPE
SYNTAX INTEGER(10..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade duration in minutes. Default is 150."
::= { utsDot3OnuFWUpgradeScheduleEntry 4 }
utsDot3OnuFWUpgradePortListBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade port list bit map. BBS1000 has 8 olt ports.
Each olt port can connect up to 32 onu device. The port bit map
defined as following port 1,2,3,....256.
To include a port in upgrade set the correponding bit to 1"
::= { utsDot3OnuFWUpgradeScheduleEntry 5 }
utsDot3OnuFWUpgradeOption OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
force(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Onu firmware upgrade option."
::= { utsDot3OnuFWUpgradeScheduleEntry 6 }
utsDot3OnuFWUpgradeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Only be able to create/delete. Setting to createAndGo/destory. active will be returned when query."
::= { utsDot3OnuFWUpgradeScheduleEntry 7 }
utsDot3OnuFWUpgradeResultObjects OBJECT IDENTIFIER ::= { utsDot3OnuUpgradeMIB 4}
utsDot3OnuFWUpgradeResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3OnuFWUpgradeResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of sjow Onu firmware information"
::= { utsDot3OnuFWUpgradeResultObjects 1}
utsDot3OnuFWUpgradeResultEntry OBJECT-TYPE
SYNTAX UtsDot3OnuFWUpgradeResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains Onu firmware upgrade information status"
INDEX { utsDot3OnuFWUpgradeResultIndex }
::= { utsDot3OnuFWUpgradeResultTable 1}
UtsDot3OnuFWUpgradeResultEntry ::=
SEQUENCE {
utsDot3OnuFWUpgradeResultIndex INTEGER,
utsDot3OnuFWUpgradeResultUpgMode INTEGER,
utsDot3OnuFWUpgradeResultStartingHour INTEGER,
utsDot3OnuFWUpgradeResultStartingMinute INTEGER,
utsDot3OnuFWUpgradeResultModule INTEGER,
utsDot3OnuFWUpgradeResultPort INTEGER,
utsDot3OnuFWUpgradeResultLogicalPort INTEGER,
utsDot3OnuFWUpgradeResultStatus INTEGER,
utsDot3OnuFWUpgradeResultStationId MacAddress,
utsDot3OnuFWUpgradeResultTargetVer DisplayString,
utsDot3OnuFWUpgradeResultCurrVer DisplayString,
utsDot3OnuFWUpgradeResultFinalState DisplayString
}
utsDot3OnuFWUpgradeResultIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade table index"
::= { utsDot3OnuFWUpgradeResultEntry 1 }
utsDot3OnuFWUpgradeResultUpgMode OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
scheduled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade mode(manual or scheduled)"
::= { utsDot3OnuFWUpgradeResultEntry 2 }
utsDot3OnuFWUpgradeResultStartingHour OBJECT-TYPE
SYNTAX INTEGER(0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade staring time(if scheduled)"
::= { utsDot3OnuFWUpgradeResultEntry 3 }
utsDot3OnuFWUpgradeResultStartingMinute OBJECT-TYPE
SYNTAX INTEGER(0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade staring time(if scheduled)"
::= { utsDot3OnuFWUpgradeResultEntry 4 }
utsDot3OnuFWUpgradeResultModule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade module number"
::= { utsDot3OnuFWUpgradeResultEntry 5 }
utsDot3OnuFWUpgradeResultPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade port number"
::= { utsDot3OnuFWUpgradeResultEntry 6 }
utsDot3OnuFWUpgradeResultLogicalPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade logical port number"
::= { utsDot3OnuFWUpgradeResultEntry 7 }
utsDot3OnuFWUpgradeResultStatus OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
begin(2),
end(3),
fail(4),
success(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade status"
::= { utsDot3OnuFWUpgradeResultEntry 8 }
utsDot3OnuFWUpgradeResultStationId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade station mac address"
::= { utsDot3OnuFWUpgradeResultEntry 9 }
utsDot3OnuFWUpgradeResultTargetVer OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade target version"
::= { utsDot3OnuFWUpgradeResultEntry 10 }
utsDot3OnuFWUpgradeResultCurrVer OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade current version"
::= { utsDot3OnuFWUpgradeResultEntry 11 }
utsDot3OnuFWUpgradeResultFinalState OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Onu firmware upgrade final state"
::= { utsDot3OnuFWUpgradeResultEntry 12 }
--
-- utsDot3Olt2OnuFWUpgradeReqGroup: when OLT receive a ONU upgrade command from NMS or CLI,
-- OLT will send a SNMP request msg to ONU, to tell ONU get a new version firmware from OLT.
-- this is group is specially for ONU which has switch component such as ON200a in current.
--
-- Deleted by zxf Feb 15,2006
--
-- UTS MLS Qos extension.
--
utsMLSQosConfExt OBJECT IDENTIFIER ::= { utsServiceConfExt 1 }
utsMLSQosExtObjects OBJECT IDENTIFIER ::= { utsMLSQosConfExt 1 }
--
-- QOS Cos queue Map table contains entry of mapping between
-- Cos and queue.
--
utsMLSQosExtCosQueueMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsMLSQosExtCosQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MLS Qos Cos to Queue mapping information.
There are 8 Cos priorities (1-8) and 4 queues(1-4)"
::= { utsMLSQosExtObjects 1 }
utsMLSQosExtCosQueueMapEntry OBJECT-TYPE
SYNTAX UtsMLSQosExtCosQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Cos to Queue mapping information of a given Cos"
INDEX { utsMLSQosExtCosPriority }
::= { utsMLSQosExtCosQueueMapTable 1 }
UtsMLSQosExtCosQueueMapEntry ::=
SEQUENCE {
utsMLSQosExtCosPriority INTEGER,
utsMLSQosExtCosQueueNum INTEGER
}
utsMLSQosExtCosPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MLS Qos Cos priority."
::= { utsMLSQosExtCosQueueMapEntry 1 }
utsMLSQosExtCosQueueNum OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MLS Qos queue number."
::= { utsMLSQosExtCosQueueMapEntry 2 }
--
-- QOS Cos queue Schedule
--
utsMLSQosExtCosQueueSchedTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsMLSQosExtCosQueueSchedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MLS Cos queue schedule information."
::= { utsMLSQosExtObjects 2 }
utsMLSQosExtCosQueueSchedEntry OBJECT-TYPE
SYNTAX UtsMLSQosExtCosQueueSchedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Cos queue schedule information."
INDEX { utsMLSQosExtCosQueueSchedIntfIndex,
utsMLSQosExtCosQueueSchedQueueNum
}
::= { utsMLSQosExtCosQueueSchedTable 1 }
UtsMLSQosExtCosQueueSchedEntry ::=
SEQUENCE {
utsMLSQosExtCosQueueSchedIntfIndex INTEGER,
utsMLSQosExtCosQueueSchedModuleId INTEGER,
utsMLSQosExtCosQueueSchedPortId INTEGER,
utsMLSQosExtCosQueueSchedLagPortId INTEGER,
utsMLSQosExtCosQueueSchedQueueNum INTEGER,
utsMLSQosExtCosQueueSchedWeight INTEGER,
utsMLSQosExtCosQueueSchedMode INTEGER
}
utsMLSQosExtCosQueueSchedIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregations,
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsMLSQosExtCosQueueSchedEntry 1 }
utsMLSQosExtCosQueueSchedModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MLS Qos Cos queue schedule Module Id."
::= { utsMLSQosExtCosQueueSchedEntry 2 }
utsMLSQosExtCosQueueSchedPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MLS Qos Cos queue schedule Port Id."
::= { utsMLSQosExtCosQueueSchedEntry 3 }
utsMLSQosExtCosQueueSchedLagPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MLS Qos Cos queue schedule Link Aggregation Port Id. "
::= { utsMLSQosExtCosQueueSchedEntry 4 }
utsMLSQosExtCosQueueSchedQueueNum OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MLS Qos Cos queue schedule entry's queue number."
::= { utsMLSQosExtCosQueueSchedEntry 5 }
utsMLSQosExtCosQueueSchedWeight OBJECT-TYPE
SYNTAX INTEGER(0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MLS Qos Cos queue schedule entry's weight. Only apply when mode is
set to WRR"
::= { utsMLSQosExtCosQueueSchedEntry 6 }
utsMLSQosExtCosQueueSchedMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
sp(2),
wrr(3),
spandwrr(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MLS Qos Cos queue schedule entry's mode."
::= { utsMLSQosExtCosQueueSchedEntry 7 }
--
-- QOS Dscp Map Table
--
-- utsMLSQosExtMapObjects OBJECT IDENTIFIER ::= { utsMLSQosExtObjects 3 }
--
-- Dscp-Cos Mapping Table
--
utsMLSQosExtDscpCosMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsMLSQosExtDscpCosMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MLS Dscp Map information."
::= { utsMLSQosExtObjects 3 }
utsMLSQosExtDscpCosMapEntry OBJECT-TYPE
SYNTAX UtsMLSQosExtDscpCosMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing MLS Dscp Cos map information.
For 1000, the interface index is valid;
For 4000, the interface index is invalid,the mapping table is global per system, so all the fileds about interface index should be 0."
INDEX { utsMLSQosExtDscpCosMapIntfIndex,
utsMLSQosExtDscpCosMapDscpVal }
::= { utsMLSQosExtDscpCosMapTable 1 }
UtsMLSQosExtDscpCosMapEntry ::=
SEQUENCE {
utsMLSQosExtDscpCosMapIntfIndex INTEGER,
utsMLSQosExtDscpCosMapModuleId INTEGER,
utsMLSQosExtDscpCosMapPortId INTEGER,
utsMLSQosExtDscpCosMapLagPortId INTEGER,
utsMLSQosExtDscpCosMapDscpVal INTEGER,
utsMLSQosExtDscpCosMapCosVal INTEGER
}
utsMLSQosExtDscpCosMapIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregations.
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsMLSQosExtDscpCosMapEntry 1 }
utsMLSQosExtDscpCosMapModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp Cos Map module Id. This value is valid only if the interface
is a giga-ethernet port"
::= { utsMLSQosExtDscpCosMapEntry 2 }
utsMLSQosExtDscpCosMapPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp Cos Map Port Id. This value is valid only if the interface
is a giga-ethernet port"
::= { utsMLSQosExtDscpCosMapEntry 3 }
utsMLSQosExtDscpCosMapLagPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp Cos Map Link Aggregation Port Id. This value is valid only if
the interface is a link aggregation port"
::= { utsMLSQosExtDscpCosMapEntry 4 }
utsMLSQosExtDscpCosMapDscpVal OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp Cos Map entry source Dscp value, range 0-63"
::= { utsMLSQosExtDscpCosMapEntry 5 }
utsMLSQosExtDscpCosMapCosVal OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dscp Cos Map entry Cos value. range 0-7"
::= { utsMLSQosExtDscpCosMapEntry 6 }
--
-- Dscp-Mutation Mapping Table
--
utsMLSQosExtDscpMutMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsMLSQosExtDscpMutMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MLS Dscp-Mutation Map information."
::= { utsMLSQosExtObjects 4 }
utsMLSQosExtDscpMutMapEntry OBJECT-TYPE
SYNTAX UtsMLSQosExtDscpMutMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing MLS Dscp-Mutation map information.
For 1000, the interface index is valid;
For 4000, the interface index is invalid,the mapping table is global per system, so all the fileds about interface index should be 0."
INDEX { utsMLSQosExtDscpMutMapIntfIndex,
utsMLSQosExtDscpMutMapDscpVal }
::= { utsMLSQosExtDscpMutMapTable 1 }
UtsMLSQosExtDscpMutMapEntry ::=
SEQUENCE {
utsMLSQosExtDscpMutMapIntfIndex INTEGER,
utsMLSQosExtDscpMutMapModuleId INTEGER,
utsMLSQosExtDscpMutMapPortId INTEGER,
utsMLSQosExtDscpMutMapLagPortId INTEGER,
utsMLSQosExtDscpMutMapDscpVal INTEGER,
utsMLSQosExtDscpMutMapMutVal INTEGER
}
utsMLSQosExtDscpMutMapIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregations.
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsMLSQosExtDscpMutMapEntry 1 }
utsMLSQosExtDscpMutMapModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp-Mutation Map module Id."
::= { utsMLSQosExtDscpMutMapEntry 2 }
utsMLSQosExtDscpMutMapPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp-Mutation Map Port Id."
::= { utsMLSQosExtDscpMutMapEntry 3 }
utsMLSQosExtDscpMutMapLagPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp-Mutation Map Link Aggregation Port Id."
::= { utsMLSQosExtDscpMutMapEntry 4 }
utsMLSQosExtDscpMutMapDscpVal OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp-Mutation Map entry source Dscp value"
::= { utsMLSQosExtDscpMutMapEntry 5 }
utsMLSQosExtDscpMutMapMutVal OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dscp-Mutation Map entry mutation value."
::= { utsMLSQosExtDscpMutMapEntry 6 }
--
-- ip-prec-dscp Mapping Table
--
utsMLSQosExtIpPrecDscpMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsMLSQosExtIpPrecDscpMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MLS Ip-Prec-Dscp Map information."
::= { utsMLSQosExtObjects 5 }
utsMLSQosExtIpPrecDscpMapEntry OBJECT-TYPE
SYNTAX UtsMLSQosExtIpPrecDscpMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing MLS Ip-Prec-Dscp map information.
For 1000, the interface index is valid;
For 4000, the interface index is invalid,the mapping table is global per system, so all the fileds about interface index should be 0."
INDEX { utsMLSQosExtIpPrecDscpMapIntfIndex,
utsMLSQosExtIpPrecDscpMapIpPrecVal }
::= { utsMLSQosExtIpPrecDscpMapTable 1 }
UtsMLSQosExtIpPrecDscpMapEntry ::=
SEQUENCE {
utsMLSQosExtIpPrecDscpMapIntfIndex INTEGER,
utsMLSQosExtIpPrecDscpMapModuleId INTEGER,
utsMLSQosExtIpPrecDscpMapPortId INTEGER,
utsMLSQosExtIpPrecDscpMapLagPortId INTEGER,
utsMLSQosExtIpPrecDscpMapIpPrecVal INTEGER,
utsMLSQosExtIpPrecDscpMapDscpVal INTEGER
}
utsMLSQosExtIpPrecDscpMapIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregations.
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsMLSQosExtIpPrecDscpMapEntry 1 }
utsMLSQosExtIpPrecDscpMapModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip-Prec-Dscp Map Module Id."
::= { utsMLSQosExtIpPrecDscpMapEntry 2 }
utsMLSQosExtIpPrecDscpMapPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip-Prec-Dscp Map Port Id."
::= { utsMLSQosExtIpPrecDscpMapEntry 3 }
utsMLSQosExtIpPrecDscpMapLagPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip-Prec-Dscp Map Link Aggregation Port Id."
::= { utsMLSQosExtIpPrecDscpMapEntry 4 }
utsMLSQosExtIpPrecDscpMapIpPrecVal OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip-Prec-Dscp Map entry Ip-Prec value"
::= { utsMLSQosExtIpPrecDscpMapEntry 5 }
utsMLSQosExtIpPrecDscpMapDscpVal OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip-Prec-Dscp Map entry Dscp value."
::= { utsMLSQosExtIpPrecDscpMapEntry 6 }
--
-- QOS Dscp Trust Table
--
--
utsMLSQosExtDscpTrustTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsMLSQosExtDscpTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MLS Dscp Trust ."
::= { utsMLSQosExtObjects 6 }
utsMLSQosExtDscpTrustEntry OBJECT-TYPE
SYNTAX UtsMLSQosExtDscpTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing MLS Dscp trust information."
INDEX { utsMLSQosExtDscpTrustIntfIndex }
::= { utsMLSQosExtDscpTrustTable 1 }
UtsMLSQosExtDscpTrustEntry ::=
SEQUENCE {
utsMLSQosExtDscpTrustIntfIndex INTEGER,
utsMLSQosExtDscpTrustModuleId INTEGER,
utsMLSQosExtDscpTrustPortId INTEGER,
utsMLSQosExtDscpTrustLagPortId INTEGER,
utsMLSQosExtDscpTrustMode INTEGER,
utsMLSQosExtDscpTrustIntfQosCtrl INTEGER
}
utsMLSQosExtDscpTrustIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregations.
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsMLSQosExtDscpTrustEntry 1 }
utsMLSQosExtDscpTrustModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identify the module of this entry's interface."
::= { utsMLSQosExtDscpTrustEntry 2 }
utsMLSQosExtDscpTrustPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identify the port of this entry's interface."
::= { utsMLSQosExtDscpTrustEntry 3 }
utsMLSQosExtDscpTrustLagPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identify the Link Aggregation Port of this entry's interface."
::= { utsMLSQosExtDscpTrustEntry 4 }
utsMLSQosExtDscpTrustMode OBJECT-TYPE
SYNTAX INTEGER
{ not-trusted(1),
trust-dscp(2),
ip-precedence(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identify the entry's trust mode. "
::= { utsMLSQosExtDscpTrustEntry 5 }
utsMLSQosExtDscpTrustIntfQosCtrl OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable qos function for an interface."
::= { utsMLSQosExtDscpTrustEntry 6 }
--
-- ACL extension
--
utsAclExt OBJECT IDENTIFIER ::= { utsServiceConfExt 2 }
--
-- ACL Profile Table
--
utsAclExtProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsAclExtProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ACL Profile information."
::= { utsAclExt 1 }
utsAclExtProfileEntry OBJECT-TYPE
SYNTAX UtsAclExtProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ACL MIB extension table."
INDEX { utsAclExtProfileId,
utsAclExtProfileFieldId,
utsAclExtProfileRuleId }
::= { utsAclExtProfileTable 1 }
UtsAclExtProfileEntry ::=
SEQUENCE {
utsAclExtProfileId INTEGER,
utsAclExtProfileFieldId INTEGER,
utsAclExtProfileRuleId INTEGER,
utsAclExtProfileName DisplayString,
utsAclExtProfileFieldName DisplayString,
utsAclExtProfileRuleName DisplayString,
utsAclExtProfileFieldBitmap INTEGER,
utsAclExtProfileFieldMaskDstMac MacAddress,
utsAclExtProfileFieldMaskSrcMac MacAddress,
utsAclExtProfileFieldMaskArpTargetMac MacAddress,
utsAclExtProfileFieldMaskArpSendMac MacAddress,
utsAclExtProfileFieldMaskSrcIp IpAddress,
utsAclExtProfileFieldMaskDstIp IpAddress,
utsAclExtProfileFieldMaskVlan INTEGER,
utsAclExtProfileFieldMaskEtherType INTEGER,
-- for BBS1000/1000+ only
utsAclExtProfileFieldMaskTcpSrcPort INTEGER,
utsAclExtProfileFieldMaskTcpDstPort INTEGER,
-- 1000 end
-- for BBS4000 only
utsAclExtProfileFieldMaskSrcPortMin INTEGER,
utsAclExtProfileFieldMaskSrcPortMax INTEGER,
utsAclExtProfileFieldMaskDstPortMin INTEGER,
utsAclExtProfileFieldMaskDstPortMax INTEGER,
-- 4000 end
utsAclExtProfileFieldMaskTagPri INTEGER,
utsAclExtProfileFieldMaskDscp INTEGER,
utsAclExtProfileFieldMaskProtocol INTEGER,
-- zhaoxf modified Dec 11,2006
-- utsAclExtProfileFieldMaskNewDscp INTEGER,
-- utsAclExtProfileFieldMaskNewTagPri INTEGER,
-- utsAclExtProfileFieldMaskNewRateLimit INTEGER,
-- utsAclExtProfileFieldMaskAction INTEGER,
utsAclExtProfileFieldMaskIHL INTEGER,
utsAclExtProfileFieldMaskFragmentOffset INTEGER,
utsAclExtProfileRuleValDstMac MacAddress,
utsAclExtProfileRuleValSrcMac MacAddress,
utsAclExtProfileRuleValArpTargetMac MacAddress,
utsAclExtProfileRuleValArpSendMac MacAddress,
utsAclExtProfileRuleValSrcIp IpAddress,
utsAclExtProfileRuleValDstIp IpAddress,
utsAclExtProfileRuleValVlan INTEGER,
utsAclExtProfileRuleValEtherType INTEGER,
-- for BBS1000/1000+ only
utsAclExtProfileRuleValTcpSrcPort INTEGER,
utsAclExtProfileRuleValTcpDstPort INTEGER,
-- end
-- for BBS4000 only
utsAclExtProfileRuleValSrcPortMin INTEGER,
utsAclExtProfileRuleValSrcPortMax INTEGER,
utsAclExtProfileRuleValDstPortMin INTEGER,
utsAclExtProfileRuleValDstPortMax INTEGER,
-- 4000 end
utsAclExtProfileRuleValTagPri INTEGER,
utsAclExtProfileRuleValDscp INTEGER,
utsAclExtProfileRuleValProtocol INTEGER,
utsAclExtProfileRuleValNewDscp INTEGER,
utsAclExtProfileRuleValNewTagPri INTEGER,
utsAclExtProfileRuleValNewBandwidth INTEGER,
-- Added by Zhaoxf Dec 11,2006
utsAclExtProfileRuleValNewBurstSize INTEGER,
utsAclExtProfileRuleValNewOutPort INTEGER,
utsAclExtProfileRuleValNewOutTag INTEGER,
utsAclExtProfileRuleValNewVlanId INTEGER,
utsAclExtProfileRuleValIHL INTEGER,
utsAclExtProfileRuleValFragmentOffset INTEGER,
utsAclExtProfileRuleValAction INTEGER
}
utsAclExtProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ID to identify the ACL profile."
::= { utsAclExtProfileEntry 1 }
utsAclExtProfileFieldId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The profile field Id of the ACL profile."
::= { utsAclExtProfileEntry 2 }
utsAclExtProfileRuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ID to identify the ACL profile."
::= { utsAclExtProfileEntry 3 }
utsAclExtProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile name."
::= { utsAclExtProfileEntry 4 }
utsAclExtProfileFieldName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field name."
::= { utsAclExtProfileEntry 5 }
utsAclExtProfileRuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule name."
::= { utsAclExtProfileEntry 6 }
utsAclExtProfileFieldBitmap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field bitmap."
::= { utsAclExtProfileEntry 7 }
utsAclExtProfileFieldMaskDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask destination MAC address."
::= { utsAclExtProfileEntry 8 }
utsAclExtProfileFieldMaskSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask source MAC address."
::= { utsAclExtProfileEntry 9 }
utsAclExtProfileFieldMaskArpTargetMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask ARP target MAC address."
::= { utsAclExtProfileEntry 10 }
utsAclExtProfileFieldMaskArpSendMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask ARP send MAC address."
::= { utsAclExtProfileEntry 11 }
utsAclExtProfileFieldMaskSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask source IP address."
::= { utsAclExtProfileEntry 12 }
utsAclExtProfileFieldMaskDstIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask destination IP address."
::= { utsAclExtProfileEntry 13 }
utsAclExtProfileFieldMaskVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask VLAN."
::= { utsAclExtProfileEntry 14 }
utsAclExtProfileFieldMaskEtherType OBJECT-TYPE
SYNTAX INTEGER
{
tag(1),
untag(2),
etherII(3),
eight02dot3(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask ethernet type."
::= { utsAclExtProfileEntry 15 }
utsAclExtProfileFieldMaskTcpSrcPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask TCP source port."
::= { utsAclExtProfileEntry 16 }
utsAclExtProfileFieldMaskTcpDstPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask TCP destination port."
::= { utsAclExtProfileEntry 17 }
utsAclExtProfileFieldMaskSrcPortMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask minimum source port."
::= { utsAclExtProfileEntry 18 }
utsAclExtProfileFieldMaskSrcPortMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask maximum source port."
::= { utsAclExtProfileEntry 19 }
utsAclExtProfileFieldMaskDstPortMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask minimum destination port."
::= { utsAclExtProfileEntry 20 }
utsAclExtProfileFieldMaskDstPortMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask maximum destination port."
::= { utsAclExtProfileEntry 21 }
utsAclExtProfileFieldMaskTagPri OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask tag priority."
::= { utsAclExtProfileEntry 22 }
utsAclExtProfileFieldMaskDscp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask Dscp."
::= { utsAclExtProfileEntry 23 }
utsAclExtProfileFieldMaskProtocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask Protocol."
::= { utsAclExtProfileEntry 24 }
utsAclExtProfileFieldMaskIHL OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask for IP header length."
::= { utsAclExtProfileEntry 25 }
utsAclExtProfileFieldMaskFragmentOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile field mask for fragment offset."
::= { utsAclExtProfileEntry 26 }
-- Rule value
utsAclExtProfileRuleValDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value destination MAC address."
::= { utsAclExtProfileEntry 100 }
utsAclExtProfileRuleValSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value source MAC address."
::= { utsAclExtProfileEntry 101 }
utsAclExtProfileRuleValArpTargetMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value ARP target MAC address."
::= { utsAclExtProfileEntry 102 }
utsAclExtProfileRuleValArpSendMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value ARP send MAC address."
::= { utsAclExtProfileEntry 103 }
utsAclExtProfileRuleValSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value source IP address."
::= { utsAclExtProfileEntry 104 }
utsAclExtProfileRuleValDstIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value destination IP address."
::= { utsAclExtProfileEntry 105 }
utsAclExtProfileRuleValVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value VLAN."
::= { utsAclExtProfileEntry 106 }
utsAclExtProfileRuleValEtherType OBJECT-TYPE
SYNTAX INTEGER
{
tag(1),
untag(2),
etherII(3),
eight02dot3(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value ethernet type."
::= { utsAclExtProfileEntry 107 }
utsAclExtProfileRuleValTcpSrcPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value TCP source port."
::= { utsAclExtProfileEntry 108 }
utsAclExtProfileRuleValTcpDstPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value TCP destination port."
::= { utsAclExtProfileEntry 109 }
utsAclExtProfileRuleValSrcPortMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value TCP source port."
::= { utsAclExtProfileEntry 110 }
utsAclExtProfileRuleValSrcPortMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value TCP destination port."
::= { utsAclExtProfileEntry 111 }
utsAclExtProfileRuleValDstPortMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value TCP source port."
::= { utsAclExtProfileEntry 112 }
utsAclExtProfileRuleValDstPortMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value TCP destination port."
::= { utsAclExtProfileEntry 113 }
utsAclExtProfileRuleValTagPri OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value tag priority."
::= { utsAclExtProfileEntry 114 }
utsAclExtProfileRuleValDscp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value Dscp."
::= { utsAclExtProfileEntry 115 }
utsAclExtProfileRuleValProtocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value Protocol."
::= { utsAclExtProfileEntry 116 }
utsAclExtProfileRuleValNewDscp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value new Dscp."
::= { utsAclExtProfileEntry 117 }
utsAclExtProfileRuleValNewTagPri OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value new tag priority."
::= { utsAclExtProfileEntry 118 }
utsAclExtProfileRuleValNewBandwidth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value new bandwidth."
::= { utsAclExtProfileEntry 119 }
utsAclExtProfileRuleValNewBurstSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value new burst size."
::= { utsAclExtProfileEntry 120 }
utsAclExtProfileRuleValNewOutPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value new out port."
::= { utsAclExtProfileEntry 121 }
utsAclExtProfileRuleValNewOutTag OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value new out tag."
::= { utsAclExtProfileEntry 122 }
utsAclExtProfileRuleValNewVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New VLAN ID for VLAN remark or append VLAN."
::= { utsAclExtProfileEntry 123 }
utsAclExtProfileRuleValIHL OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value IP head length."
::= { utsAclExtProfileEntry 124 }
utsAclExtProfileRuleValFragmentOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value fragment offset."
::= { utsAclExtProfileEntry 125 }
utsAclExtProfileRuleValAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2),
remark-dscp(3),
remark-priority(4),
rate-limit(5),
remark-vlan(6),
append-vlan(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL profile rule value action."
::= { utsAclExtProfileEntry 200 }
--
-- Interface ACL Profile Configuration Table
--
utsAclExtIntfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsAclExtIntfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Interface ACL Profile information."
::= { utsAclExt 2 }
utsAclExtIntfConfigEntry OBJECT-TYPE
SYNTAX UtsAclExtIntfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface ACL MIB table."
INDEX { utsAclExtIntfConfigIntfNum }
::= { utsAclExtIntfConfigTable 1 }
UtsAclExtIntfConfigEntry ::=
SEQUENCE {
utsAclExtIntfConfigIntfNum INTEGER,
utsAclExtIntfConfigIntfModule INTEGER,
utsAclExtIntfConfigIntfPort INTEGER,
utsAclExtIntfConfigIntfLagGrpId INTEGER,
utsAclExtIntfConfigIntfFilterType INTEGER,
utsAclExtIntfConfigApplProfileId INTEGER,
utsAclExtIntfConfigApplStatus RowStatus
}
utsAclExtIntfConfigIntfNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface index denotes switch ports and link aggregation.
For 1000:The range is 1-44. 1-12 denotes switch ports and 13-44 denotes link aggregations.
For 4000:The range is 1-72. 1-48 denotes switch ports and 49-72 denotes link aggregations."
::= { utsAclExtIntfConfigEntry 1 }
utsAclExtIntfConfigIntfModule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index to this Interface/ACL profile entry."
::= { utsAclExtIntfConfigEntry 2 }
utsAclExtIntfConfigIntfPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index to this Interface/ACL profile entry."
::= { utsAclExtIntfConfigEntry 3 }
utsAclExtIntfConfigIntfLagGrpId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index to this Interface/ACL profile entry."
::= { utsAclExtIntfConfigEntry 4 }
utsAclExtIntfConfigIntfFilterType OBJECT-TYPE
SYNTAX INTEGER
{
mgmt-type(1),
hardware-type(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management interface index to this Interface/ACL profile entry."
::= { utsAclExtIntfConfigEntry 5 }
utsAclExtIntfConfigApplProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ACL profile associate with this Interface."
::= { utsAclExtIntfConfigEntry 6 }
utsAclExtIntfConfigApplStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of the ACL profile associate with this Interface."
::= { utsAclExtIntfConfigEntry 7 }
--
-- ACL Profile Import Configuration Table
--
utsAclExtProfileImportTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsAclExtProfileImportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of import ACL profile information."
::= { utsAclExt 3 }
utsAclExtProfileImportEntry OBJECT-TYPE
SYNTAX UtsAclExtProfileImportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in ACL profile import table."
INDEX { utsAclExtProfileImportProfileId}
::= { utsAclExtProfileImportTable 1 }
UtsAclExtProfileImportEntry ::=
SEQUENCE {
utsAclExtProfileImportProfileId INTEGER,
utsAclExtProfileImportFileName DisplayString,
utsAclExtProfileImportStatus RowStatus
}
utsAclExtProfileImportProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index to this ACL profile import entry."
::= { utsAclExtProfileImportEntry 1 }
utsAclExtProfileImportFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The profile name associate with this ACL profile import entry."
::= { utsAclExtProfileImportEntry 2 }
utsAclExtProfileImportStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The profile name associate with this ACL profile import entry."
::= { utsAclExtProfileImportEntry 3 }
-- EPON device ACL MIB
utsDot3Olt2AclProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2AclProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 ACL MIBs."
::= { utsAclExt 4 }
utsDot3Olt2AclProfEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2AclProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 ACL MIBs table."
INDEX { utsDot3OltAclModuleId, utsDot3OltAclDeviceId, utsDot3OltAclRuleIndex }
::= { utsDot3Olt2AclProfTable 1 }
UtsDot3Olt2AclProfEntry ::=
SEQUENCE {
utsDot3OltAclModuleId INTEGER,
utsDot3OltAclDeviceId INTEGER,
utsDot3OltAclRuleIndex INTEGER,
utsDot3OltAclPonPort INTEGER,
utsDot3OltAclLLIDPort INTEGER,
utsDot3OltAclMask INTEGER,
utsDot3OltAclVlanId INTEGER,
utsDot3OltAclVlanIdMask INTEGER,
utsDot3OltAclIpSaOrMacDa4 INTEGER,
utsDot3OltAclIpSaOrMacDa4Mask INTEGER,
utsDot3OltAclIpDaOrL2Type INTEGER,
utsDot3OltAclIpDaOrL2TypeMask INTEGER,
utsDot3OltAclIpProtocolId INTEGER,
utsDot3OltAclIpProtocolIdMask INTEGER,
utsDot3OltAclL4SrcPortOrMacDa2 INTEGER,
utsDot3OltAclL4SrcPortOrMacDa2Mask INTEGER,
utsDot3OltAclL4DstPort INTEGER,
utsDot3OltAclL4DstPortMask INTEGER,
utsDot3OltAclIpOptionsPresent TruthValue,
utsDot3OltAclIpFragmentedPacket TruthValue,
utsDot3OltAclAction INTEGER,
utsDot3OltAclDirection INTEGER,
utsDot3OltAclPacketType INTEGER
}
utsDot3OltAclModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2AclProfEntry 1 }
utsDot3OltAclDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2AclProfEntry 2 }
utsDot3OltAclRuleIndex OBJECT-TYPE
SYNTAX INTEGER(1..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configures an ACL rule in the bi-direction at the OLT. There are a
total of 1500 ACL entries in the table. The action can be either
PERMIT or DENY. Each ACL can specify the VLAN, the IP src/destination
address, IP protocol-id, ethernet type, MAC destination address,
L4 src/destination ports, ip_options_present flag, ip_fragment_present flag,
direction and packet type. Most of these fields are bit-maskable.
The last ACL rule (ruleindex 1499) is the default rule, which applies
when no other ACL entry is hit."
::= { utsDot3Olt2AclProfEntry 3 }
utsDot3OltAclPonPort OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"OLT device PON port index."
::= { utsDot3Olt2AclProfEntry 4 }
utsDot3OltAclLLIDPort OBJECT-TYPE
SYNTAX INTEGER(0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"OLT device ONU port index. 0 means this ACL rule apply to specify PON port only."
::= { utsDot3Olt2AclProfEntry 5 }
utsDot3OltAclMask OBJECT-TYPE
SYNTAX INTEGER -- Begin with left bit 0:15
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Global Mask for specifying which field of structure is valid."
::= { utsDot3Olt2AclProfEntry 6 }
utsDot3OltAclVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID."
::= { utsDot3Olt2AclProfEntry 7 }
utsDot3OltAclVlanIdMask OBJECT-TYPE
SYNTAX INTEGER -- Begin with left bit 0:15
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID mask."
::= { utsDot3Olt2AclProfEntry 8 }
utsDot3OltAclIpSaOrMacDa4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP source address or MAC address dest0to3."
::= { utsDot3Olt2AclProfEntry 9 }
utsDot3OltAclIpSaOrMacDa4Mask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP source address or MAC address dest0to3 mask."
::= { utsDot3Olt2AclProfEntry 10 }
utsDot3OltAclIpDaOrL2Type OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP destination address or ethernet type/length."
::= { utsDot3Olt2AclProfEntry 11 }
utsDot3OltAclIpDaOrL2TypeMask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP destination address or ethernet type/length mask."
::= { utsDot3Olt2AclProfEntry 12 }
utsDot3OltAclIpProtocolId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Protocol id field."
::= { utsDot3Olt2AclProfEntry 13 }
utsDot3OltAclIpProtocolIdMask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Protocol id mask."
::= { utsDot3Olt2AclProfEntry 14 }
utsDot3OltAclL4SrcPortOrMacDa2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Layer4 source port or MAC address dest4to5."
::= { utsDot3Olt2AclProfEntry 15 }
utsDot3OltAclL4SrcPortOrMacDa2Mask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Layer4 source port or MAC address dest4to5 mask."
::= { utsDot3Olt2AclProfEntry 16 }
utsDot3OltAclL4DstPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Layer4 destination port."
::= { utsDot3Olt2AclProfEntry 17 }
utsDot3OltAclL4DstPortMask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Layer4 destination port mask."
::= { utsDot3Olt2AclProfEntry 18 }
utsDot3OltAclIpOptionsPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether IP options present."
::= { utsDot3Olt2AclProfEntry 19 }
utsDot3OltAclIpFragmentedPacket OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether IP fragmented packet."
::= { utsDot3Olt2AclProfEntry 20 }
utsDot3OltAclAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action to be taken - PERMIT or DENY."
::= { utsDot3Olt2AclProfEntry 21 }
utsDot3OltAclDirection OBJECT-TYPE
SYNTAX INTEGER
{
egress(1),
ingress(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Direction - Egress or Ingress."
::= { utsDot3Olt2AclProfEntry 22 }
utsDot3OltAclPacketType OBJECT-TYPE
SYNTAX INTEGER
{
ip(1),
ethernet(2),
arp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Packet Type - IP, ARP or Ethernet."
::= { utsDot3Olt2AclProfEntry 23 }
------------------------------------------------------------
-- OLT PON ACL configure table
------------------------------------------------------------
-- EPON device ACL MIB
utsDot3Olt2AclConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2AclConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 ACL MIBs."
::= { utsAclExt 5 }
utsDot3Olt2AclConfEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2AclConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 ACL MIBs table."
INDEX { utsDot3OltAclConfModuleId, utsDot3OltAclConfDeviceId, utsDot3OltAclConfPonPort,
utsDot3OltAclConfLlidPort, utsDot3OltAclConfProfId, utsDot3OltAclConfDir }
::= { utsDot3Olt2AclConfTable 1 }
UtsDot3Olt2AclConfEntry ::=
SEQUENCE {
utsDot3OltAclConfModuleId INTEGER,
utsDot3OltAclConfDeviceId INTEGER,
utsDot3OltAclConfPonPort INTEGER,
utsDot3OltAclConfLlidPort INTEGER,
utsDot3OltAclConfProfId INTEGER,
utsDot3OltAclConfDir INTEGER,
-- utsDot3OltAclConfUpstream TruthValue,
-- utsDot3OltAclConfDownstream TruthValue,
utsDot3OltAclConfRowStatus RowStatus
}
utsDot3OltAclConfModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2AclConfEntry 1 }
utsDot3OltAclConfDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2AclConfEntry 2 }
utsDot3OltAclConfPonPort OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OLT device PON port index."
::= { utsDot3Olt2AclConfEntry 4 }
utsDot3OltAclConfLlidPort OBJECT-TYPE
SYNTAX INTEGER(0..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OLT device ONU port index. 0 means this ACL rule apply to specify PON port only."
::= { utsDot3Olt2AclConfEntry 5 }
utsDot3OltAclConfProfId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an ACL rule in the bi-direction at the OLT. There are a
total of 1500 ACL entries in the table. The action can be either
PERMIT or DENY. Each ACL can specify the VLAN, the IP src/destination
address, IP protocol-id, ethernet type, MAC destination address,
L4 src/destination ports, ip_options_present flag, ip_fragment_present flag,
direction and packet type. Most of these fields are bit-maskable.
The last ACL rule (ruleindex 1499) is the default rule, which applies
when no other ACL entry is hit."
::= { utsDot3Olt2AclConfEntry 6 }
utsDot3OltAclConfDir OBJECT-TYPE
SYNTAX INTEGER
{
upstream(1),
downstream(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ACl configuration for upstream or downstream."
::= { utsDot3Olt2AclConfEntry 7 }
utsDot3OltAclConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status"
::= { utsDot3Olt2AclConfEntry 9 }
-------------------------------------------------------------------------------
-- CTC controllrable IGMP
-------------------------------------------------------------------------------
utsCtcCtrlIgmpExt OBJECT IDENTIFIER ::= { utsServiceConfExt 3 }
utsCtcMulticastCtrlExtObjects OBJECT IDENTIFIER ::= { utsCtcCtrlIgmpExt 1}
utsOnuCtcMulticastCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOnuCtcMulticastCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for ONU multicast control, which following CTC spec."
::= { utsCtcMulticastCtrlExtObjects 1 }
utsOnuCtcMulticastCtrlEntry OBJECT-TYPE
SYNTAX UtsOnuCtcMulticastCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ONU multicast control table."
INDEX { utsDot3OnuMCtrlModuleId,utsDot3OnuMCtrlDeviceId,utsDot3OnuMCtrlPonPortId,
utsDot3OnuMCtrlLogicalPortId,
utsDot3OnuMCtrlEtherPortIndex,utsDot3OnuMCastVlan,utsDot3OnuMCastGroupStart}
::= { utsOnuCtcMulticastCtrlTable 1 }
UtsOnuCtcMulticastCtrlEntry ::=
SEQUENCE
{
utsDot3OnuMCtrlModuleId INTEGER,
utsDot3OnuMCtrlDeviceId INTEGER,
utsDot3OnuMCtrlPonPortId INTEGER,
utsDot3OnuMCtrlLogicalPortId INTEGER,
utsDot3OnuMCtrlEtherPortIndex INTEGER,
utsDot3OnuMCastVlan INTEGER,
utsDot3OnuMCastGroupStart IpAddress,
utsDot3OnuMCastGroupEnd IpAddress,
utsDot3OnuAuthType INTEGER,
utsDot3OnuMCastCtrlRowStatus RowStatus
}
utsDot3OnuMCtrlModuleId OBJECT-TYPE
SYNTAX INTEGER(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT module id for the current ONU."
::= { utsOnuCtcMulticastCtrlEntry 1 }
utsDot3OnuMCtrlDeviceId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT device id for the current ONU."
::= { utsOnuCtcMulticastCtrlEntry 2 }
utsDot3OnuMCtrlPonPortId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT port id for the current ONU."
::= { utsOnuCtcMulticastCtrlEntry 3 }
utsDot3OnuMCtrlLogicalPortId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The logical port id for the current ONU."
::= { utsOnuCtcMulticastCtrlEntry 4 }
utsDot3OnuMCtrlEtherPortIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Ethernet port Index"
::= { utsOnuCtcMulticastCtrlEntry 5 }
utsDot3OnuMCastVlan OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast VLAN ID"
::= { utsOnuCtcMulticastCtrlEntry 6 }
utsDot3OnuMCastGroupStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP multicast group start address"
::= { utsOnuCtcMulticastCtrlEntry 7 }
utsDot3OnuMCastGroupEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP multicast group end address"
::= { utsOnuCtcMulticastCtrlEntry 8 }
utsDot3OnuAuthType OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2),
preview(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ONU multicast authenticated type"
::= { utsOnuCtcMulticastCtrlEntry 9 }
utsDot3OnuMCastCtrlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsOnuCtcMulticastCtrlEntry 10 }
-----------------------------------------------------------
-- ONU port band control, CTC spec
-----------------------------------------------------------
utsOnuCtcBandCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOnuCtcBandCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for ONU band control, which following CTC spec."
::= { utsCtcMulticastCtrlExtObjects 2 }
utsOnuCtcBandCtrlEntry OBJECT-TYPE
SYNTAX UtsOnuCtcBandCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ONU band control table."
INDEX { utsDot3OnuBandCtrlModuleId,utsDot3OnuBandCtrlDeviceId,utsDot3OnuBandCtrlPonPortId,
utsDot3OnuBandCtrlLogicalPortId,utsDot3OnuBandCtrlEtherPortIndex}
::= { utsOnuCtcBandCtrlTable 1 }
UtsOnuCtcBandCtrlEntry ::=
SEQUENCE
{
utsDot3OnuBandCtrlModuleId INTEGER,
utsDot3OnuBandCtrlDeviceId INTEGER,
utsDot3OnuBandCtrlPonPortId INTEGER,
utsDot3OnuBandCtrlLogicalPortId INTEGER,
utsDot3OnuBandCtrlEtherPortIndex INTEGER,
utsDot3OnuMaxActiveChannel INTEGER,
utsDot3OnuPreviewLength INTEGER,
utsDot3OnuPreviewCount INTEGER,
utsDot3OnuPreviewInterval INTEGER,
utsDot3OnuPreviewResetTime INTEGER,
utsDot3OnuMGroupJoinNum INTEGER
-- utsDot3OnuBandCtrlRowStatus RowStatus
}
utsDot3OnuBandCtrlModuleId OBJECT-TYPE
SYNTAX INTEGER(1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsOnuCtcBandCtrlEntry 1 }
utsDot3OnuBandCtrlDeviceId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsOnuCtcBandCtrlEntry 2 }
utsDot3OnuBandCtrlPonPortId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsOnuCtcBandCtrlEntry 3 }
utsDot3OnuBandCtrlLogicalPortId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsOnuCtcBandCtrlEntry 4 }
utsDot3OnuBandCtrlEtherPortIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU Ethernet port"
::= { utsOnuCtcBandCtrlEntry 5 }
utsDot3OnuMaxActiveChannel OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max band one user can apply at the same"
::= { utsOnuCtcBandCtrlEntry 6 }
utsDot3OnuPreviewLength OBJECT-TYPE
SYNTAX INTEGER(1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Band preview length, in seconds"
::= { utsOnuCtcBandCtrlEntry 7 }
utsDot3OnuPreviewCount OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Band preview count"
::= { utsOnuCtcBandCtrlEntry 8 }
utsDot3OnuPreviewInterval OBJECT-TYPE
SYNTAX INTEGER(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Band preview interval, in seconds"
::= { utsOnuCtcBandCtrlEntry 9 }
utsDot3OnuPreviewResetTime OBJECT-TYPE
SYNTAX INTEGER(10..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Band preview reset time, in seconds"
::= { utsOnuCtcBandCtrlEntry 10 }
utsDot3OnuMGroupJoinNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU join Multicast group number in this port"
::= { utsOnuCtcBandCtrlEntry 11 }
-- OLT IGMP proxy VLAN configuation, CTC spec
utsOltCtcIgmpCtrlExtObjects OBJECT IDENTIFIER ::= { utsCtcMulticastCtrlExtObjects 3 }
utsOltCtcIgmpProxyCtrlGroup OBJECT IDENTIFIER ::= { utsOltCtcIgmpCtrlExtObjects 1 }
utsOltCtcMulticastCtrlMode OBJECT-TYPE
SYNTAX INTEGER
{
special(1), -- using CTC-special igmp
control(2), -- using CTC-control igmp
standard(3) -- using standard igmp
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OLT IGMP proxy mode"
::= { utsOltCtcIgmpProxyCtrlGroup 2 }
utsOltNoCdrForShortJoinLeave OBJECT-TYPE
SYNTAX INTEGER(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In control mode, do not create cdr for short time join and leave, the range is from 1 to 15, default value
is 3 second."
DEFVAL {3}
::= { utsOltCtcIgmpProxyCtrlGroup 3 }
utsOltNoTimeForShortPreview OBJECT-TYPE
SYNTAX INTEGER(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In control mode, do not time for short preview, the range is from 1 to 15, default value is 3 second."
DEFVAL {3}
::= { utsOltCtcIgmpProxyCtrlGroup 4 }
---------------------------------------------------
-- CDR MIBs, CTC spec
---------------------------------------------------
utsCtcCdrExtObjects OBJECT IDENTIFIER ::= { utsCtcCtrlIgmpExt 2}
utsOltCtcCdrCtrlGroup OBJECT IDENTIFIER ::= { utsCtcCdrExtObjects 1 }
utsOltCtcCdrServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CDR server IP address"
::= { utsOltCtcCdrCtrlGroup 1 }
utsOltCtcCdrPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CDR server udp port"
::= { utsOltCtcCdrCtrlGroup 2 }
utsOltCtcCdrReportInterval OBJECT-TYPE
SYNTAX INTEGER(10..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CDR report interval in seconds"
::= { utsOltCtcCdrCtrlGroup 3 }
utsOltCtcCdrReportCount OBJECT-TYPE
SYNTAX INTEGER(10..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the CDR counting number which will trigger the report to CDR server"
::= { utsOltCtcCdrCtrlGroup 4 }
utsOltCtcCdrForceReport OBJECT-TYPE
SYNTAX INTEGER
{
force(1) -- write only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Force CDR report to server"
::= { utsOltCtcCdrCtrlGroup 5 }
utsOltCtcCdrReportMode OBJECT-TYPE
SYNTAX INTEGER
{
periodical(1),
counting(2),
force(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set CDR reporting mode"
::= { utsOltCtcCdrCtrlGroup 6 }
utsOltCtcCdrReportSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set CDR reporting switch, the default value is enable."
::= { utsOltCtcCdrCtrlGroup 8 }
-----------------------------------------------------------
-- OLT pull down multcast traffic table
-----------------------------------------------------------
utsOltPullDownMcTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOltPullDownMcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT multcast pull down control."
::= { utsCtcMulticastCtrlExtObjects 4 }
utsOltPullDownMcEntry OBJECT-TYPE
SYNTAX UtsOltPullDownMcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT multcast pull down control table."
INDEX { utsOltPullDownMcGroupIpAddr }
::= { utsOltPullDownMcTable 1 }
UtsOltPullDownMcEntry ::=
SEQUENCE
{
utsOltPullDownMcGroupIpAddr IpAddress,
utsOltPullDownMcGroupMVlan INTEGER,
utsOltPullDownMcGroupRowStatus RowStatus
}
utsOltPullDownMcGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OLT pull down multicast group IP address"
::= { utsOltPullDownMcEntry 1 }
utsOltPullDownMcGroupMVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"OLT pull down multicast VLAN of specific multicast group"
::= { utsOltPullDownMcEntry 2 }
utsOltPullDownMcGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsOltPullDownMcEntry 3 }
-----------------------------------------------------------
-- OLT multicast VLAN/Multicast group mapping table
-----------------------------------------------------------
utsOltGlbMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOltGlbMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT multcast VLAN mapping table control."
::= { utsCtcMulticastCtrlExtObjects 5 }
utsOltGlbMulticastGroupEntry OBJECT-TYPE
SYNTAX UtsOltGlbMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT multcast VLAN mapping control table."
INDEX { utsOltGlbMulticastGroupMVlan }
::= { utsOltGlbMulticastGroupTable 1 }
UtsOltGlbMulticastGroupEntry ::=
SEQUENCE
{
utsOltGlbMulticastGroupMVlan INTEGER,
utsOltGlbMulticastGroupIpAddrStart IpAddress,
utsOltGlbMulticastGroupIpAddrEnd IpAddress,
utsOltGlbMulticastGroupRowStatus RowStatus
}
utsOltGlbMulticastGroupMVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast VLAN"
::= { utsOltGlbMulticastGroupEntry 1 }
utsOltGlbMulticastGroupIpAddrStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Multicast group start IP address"
::= { utsOltGlbMulticastGroupEntry 2 }
utsOltGlbMulticastGroupIpAddrEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Multicast group end IP address"
::= { utsOltGlbMulticastGroupEntry 3 }
utsOltGlbMulticastGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { utsOltGlbMulticastGroupEntry 4 }
-- ONU multicast table
utsOnuCtcMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOnuCtcMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for ONU multicast group list, which following CTC spec."
::= { utsCtcMulticastCtrlExtObjects 6 }
utsOnuCtcMulticastEntry OBJECT-TYPE
SYNTAX UtsOnuCtcMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ONU multicast group table."
INDEX { utsDot3OnuMCastModuleId,utsDot3OnuMCastDeviceId,utsDot3OnuMCastPortId,
utsDot3OnuMCastLogicalPortId,utsDot3OnuMCastEtherPortId,utsDot3OnuMCastGroup}
::= { utsOnuCtcMulticastTable 1 }
UtsOnuCtcMulticastEntry ::=
SEQUENCE
{
utsDot3OnuMCastModuleId INTEGER,
utsDot3OnuMCastDeviceId INTEGER,
utsDot3OnuMCastPortId INTEGER,
utsDot3OnuMCastLogicalPortId INTEGER,
utsDot3OnuMCastEtherPortId INTEGER,
utsDot3OnuMCastGroup IpAddress,
utsDot3OnuMCastMVlan INTEGER,
utsDot3OnuMCastAuthType INTEGER,
utsDot3OnuMCastDuration INTEGER
}
utsDot3OnuMCastModuleId OBJECT-TYPE
SYNTAX INTEGER(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT module id for the current ONU."
::= { utsOnuCtcMulticastEntry 1 }
utsDot3OnuMCastDeviceId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT device id for the current ONU."
::= { utsOnuCtcMulticastEntry 2 }
utsDot3OnuMCastPortId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT port id for the current ONU."
::= { utsOnuCtcMulticastEntry 3 }
utsDot3OnuMCastLogicalPortId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The logical port id for the current ONU."
::= { utsOnuCtcMulticastEntry 4 }
utsDot3OnuMCastEtherPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU Ethernet port Index"
::= { utsOnuCtcMulticastEntry 5 }
utsDot3OnuMCastGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP multicast group"
::= { utsOnuCtcMulticastEntry 6 }
utsDot3OnuMCastMVlan OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast VLAN ID"
::= { utsOnuCtcMulticastEntry 7 }
utsDot3OnuMCastAuthType OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2),
preview(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU multicast authenticated type"
::= { utsOnuCtcMulticastEntry 8 }
utsDot3OnuMCastDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast duration"
::= { utsOnuCtcMulticastEntry 9 }
--
-----------------------------------------------------------
-- ONU multicast statistics
-----------------------------------------------------------
utsOnuCtcMCastStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOnuCtcMCastStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ONU multicast statistics table."
::= { utsCtcMulticastCtrlExtObjects 7 }
utsOnuCtcMCastStatEntry OBJECT-TYPE
SYNTAX UtsOnuCtcMCastStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ONU multicast statistics table."
INDEX { utsDot3OnuMCastStatMGroup }
::= { utsOnuCtcMCastStatTable 1 }
UtsOnuCtcMCastStatEntry ::=
SEQUENCE
{
utsDot3OnuMCastStatMGroup IpAddress,
utsDot3OnuMCastStatUserNum INTEGER,
utsDot3OnuMCastStatRequestNum INTEGER,
utsDot3OnuMCastStatReqRejNum INTEGER,
utsDot3OnuMCastStatTotalTime INTEGER,
utsDot3OnuMCastStatAverageTime INTEGER
}
utsDot3OnuMCastStatMGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast groups"
::= { utsOnuCtcMCastStatEntry 2 }
utsDot3OnuMCastStatUserNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User number under this group"
::= { utsOnuCtcMCastStatEntry 3 }
utsDot3OnuMCastStatRequestNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Request number for this group"
::= { utsOnuCtcMCastStatEntry 4 }
utsDot3OnuMCastStatReqRejNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rejected number for this group"
::= { utsOnuCtcMCastStatEntry 5 }
utsDot3OnuMCastStatTotalTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Totoal time for this group"
::= { utsOnuCtcMCastStatEntry 6 }
utsDot3OnuMCastStatAverageTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average time for this group"
::= { utsOnuCtcMCastStatEntry 8 }
-- Multicast Online Group Stat. per ONU, required by NMS
utsOnuCtcMulticastOnlineGroupStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOnuCtcMulticastOnlineGroupStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for ONU multicast online group stat table."
::= { utsCtcMulticastCtrlExtObjects 8 }
utsOnuCtcMulticastOnlineGroupStatEntry OBJECT-TYPE
SYNTAX UtsOnuCtcMulticastOnlineGroupStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ONU multicast online group stat table."
INDEX { utsDot3OnuMCastOnlineGroupStatModuleId,utsDot3OnuMCastOnlineGroupStatDeviceId,utsDot3OnuMCastOnlineGroupStatPortId,
utsDot3OnuMCastOnlineGroupStatLogicalPortId}
::= { utsOnuCtcMulticastOnlineGroupStatTable 1 }
UtsOnuCtcMulticastOnlineGroupStatEntry ::=
SEQUENCE
{
utsDot3OnuMCastOnlineGroupStatModuleId INTEGER,
utsDot3OnuMCastOnlineGroupStatDeviceId INTEGER,
utsDot3OnuMCastOnlineGroupStatPortId INTEGER,
utsDot3OnuMCastOnlineGroupStatLogicalPortId INTEGER,
utsDot3OnuMCastOnlineGroupStatNumber INTEGER
}
utsDot3OnuMCastOnlineGroupStatModuleId OBJECT-TYPE
SYNTAX INTEGER(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT module id for the current ONU."
::= { utsOnuCtcMulticastOnlineGroupStatEntry 1 }
utsDot3OnuMCastOnlineGroupStatDeviceId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT device id for the current ONU."
::= { utsOnuCtcMulticastOnlineGroupStatEntry 2 }
utsDot3OnuMCastOnlineGroupStatPortId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT port id for the current ONU."
::= { utsOnuCtcMulticastOnlineGroupStatEntry 3 }
utsDot3OnuMCastOnlineGroupStatLogicalPortId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The logical port id for the current ONU."
::= { utsOnuCtcMulticastOnlineGroupStatEntry 4 }
utsDot3OnuMCastOnlineGroupStatNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast online group stat number."
::= { utsOnuCtcMulticastOnlineGroupStatEntry 5 }
-- Multicast Stat. per UNI per ONU, required by NMS
utsOnuCtcMulticastStatForUserPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsOnuCtcMulticastStatForUserPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for ONU multicast stat for each ONU UNI user port table."
::= { utsCtcMulticastCtrlExtObjects 9 }
utsOnuCtcMulticastStatForUserPortEntry OBJECT-TYPE
SYNTAX UtsOnuCtcMulticastStatForUserPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ONU multicast user port stat table."
INDEX { utsDot3OnuMCastStatForUserPortModuleId,utsDot3OnuMCastStatForUserPortDeviceId,utsDot3OnuMCastStatForUserPortPortId,
utsDot3OnuMCastStatForUserPortLogicalPortId,utsDot3OnuMCastStatForUserPortEthernetPortId }
::= { utsOnuCtcMulticastStatForUserPortTable 1 }
UtsOnuCtcMulticastStatForUserPortEntry ::=
SEQUENCE
{
utsDot3OnuMCastStatForUserPortModuleId INTEGER,
utsDot3OnuMCastStatForUserPortDeviceId INTEGER,
utsDot3OnuMCastStatForUserPortPortId INTEGER,
utsDot3OnuMCastStatForUserPortLogicalPortId INTEGER,
utsDot3OnuMCastStatForUserPortEthernetPortId INTEGER,
utsDot3OnuMCastStatForUserPortViewNumber INTEGER,
utsDot3OnuMCastStatForUserPortTotalTime INTEGER,
utsDot3OnuMCastStatForUserPortAverageTime INTEGER
}
utsDot3OnuMCastStatForUserPortModuleId OBJECT-TYPE
SYNTAX INTEGER(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT module id for the current ONU."
::= { utsOnuCtcMulticastStatForUserPortEntry 1 }
utsDot3OnuMCastStatForUserPortDeviceId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT device id for the current ONU."
::= { utsOnuCtcMulticastStatForUserPortEntry 2 }
utsDot3OnuMCastStatForUserPortPortId OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OLT port id for the current ONU."
::= { utsOnuCtcMulticastStatForUserPortEntry 3 }
utsDot3OnuMCastStatForUserPortLogicalPortId OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The logical port id for the current ONU."
::= { utsOnuCtcMulticastStatForUserPortEntry 4 }
utsDot3OnuMCastStatForUserPortEthernetPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ethernet port id for the current ONU."
::= { utsOnuCtcMulticastStatForUserPortEntry 5 }
utsDot3OnuMCastStatForUserPortViewNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast requrest number for the ONU UNI port."
::= { utsOnuCtcMulticastStatForUserPortEntry 6 }
utsDot3OnuMCastStatForUserPortTotalTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast total time for the ONU UNI port."
::= { utsOnuCtcMulticastStatForUserPortEntry 7 }
utsDot3OnuMCastStatForUserPortAverageTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast average time for the ONU UNI port."
::= { utsOnuCtcMulticastStatForUserPortEntry 8 }
--
-- UTS Diagnosis extension.
--
utsDiagnosisPONConfExt OBJECT IDENTIFIER ::= { utsDiagnosisConfExt 1 }
utsDiagnosisEthConfExt OBJECT IDENTIFIER ::= { utsDiagnosisConfExt 2 }
-- ONU Optical Power Measure Table
utsDot3Onu2OpticalPowerMeasureTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2OpticalPowerMeasureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU Optical Power Measure."
::= { utsDiagnosisPONConfExt 1 }
utsDot3Onu2OpticalPowerMeasureEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2OpticalPowerMeasureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu Optical Power Measure table."
INDEX { utsDot3OnuOpticalPowerModuleId,utsDot3OnuOpticalPowerDeviceId,utsDot3OnuOpticalPowerPortId,utsDot3OnuOpticalPowerLogicalPortId}
::= { utsDot3Onu2OpticalPowerMeasureTable 1 }
UtsDot3Onu2OpticalPowerMeasureEntry ::=
SEQUENCE {
utsDot3OnuOpticalPowerModuleId INTEGER,
utsDot3OnuOpticalPowerDeviceId INTEGER,
utsDot3OnuOpticalPowerPortId INTEGER,
utsDot3OnuOpticalPowerLogicalPortId INTEGER,
utsDot3OnuOpticalPowerValue INTEGER,
utsDot3OnuOpticalPowerAdmin INTEGER
}
utsDot3OnuOpticalPowerModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2OpticalPowerMeasureEntry 1 }
utsDot3OnuOpticalPowerDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2OpticalPowerMeasureEntry 2 }
utsDot3OnuOpticalPowerPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2OpticalPowerMeasureEntry 3 }
utsDot3OnuOpticalPowerLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2OpticalPowerMeasureEntry 4 }
utsDot3OnuOpticalPowerValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value of the ONU optical power."
::= { utsDot3Onu2OpticalPowerMeasureEntry 5 }
utsDot3OnuOpticalPowerAdmin OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2) --default value
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This entry to set the optical power measure switch,when NMS want to get the power value, NMS should
set the admin switch to enable first, then set the request to get the value, when Node return the result
of the power value, Node should set the admin switch to disable auto."
::= { utsDot3Onu2OpticalPowerMeasureEntry 6 }
-- OLT Port Diagnosis Table
utsDot3Olt2PortDiagnosisTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Olt2PortDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for OLT type 2 port Diagnosis MIBs."
::= { utsDiagnosisPONConfExt 2 }
utsDot3Olt2PortDiagnosisEntry OBJECT-TYPE
SYNTAX UtsDot3Olt2PortDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the OLT type 2 port Diagnosis MIBs table."
INDEX { utsDot3OltPortDiagnosisModuleId, utsDot3OltPortDiagnosisDeviceId, utsDot3OltPortDiagnosisPortId }
::= { utsDot3Olt2PortDiagnosisTable 1 }
UtsDot3Olt2PortDiagnosisEntry ::=
SEQUENCE {
utsDot3OltPortDiagnosisModuleId INTEGER,
utsDot3OltPortDiagnosisDeviceId INTEGER,
utsDot3OltPortDiagnosisPortId INTEGER,
utsDot3OltPortDiagnosisAction INTEGER,
utsDot3OltPortDiagnosisStatus INTEGER,
utsDot3OltPortDiagnosisResult DisplayString
}
utsDot3OltPortDiagnosisModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt module index"
::= { utsDot3Olt2PortDiagnosisEntry 1 }
utsDot3OltPortDiagnosisDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt device index"
::= { utsDot3Olt2PortDiagnosisEntry 2 }
utsDot3OltPortDiagnosisPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the olt port index"
::= { utsDot3Olt2PortDiagnosisEntry 3 }
utsDot3OltPortDiagnosisAction OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
stop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start or stop diagnosis process on this pon port."
::= { utsDot3Olt2PortDiagnosisEntry 4 }
utsDot3OltPortDiagnosisStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of diagnosis process, the range is 0 to 100."
::= { utsDot3Olt2PortDiagnosisEntry 5 }
utsDot3OltPortDiagnosisResult OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Result of diagnosis result, there are list all bad onu's mac address, the format like,
'000e35467412,000f1fbbef55,000e123456', a null string reprents no bad onu"
::= { utsDot3Olt2PortDiagnosisEntry 6 }
-- ONU Optical Transceiver Diagnosis Table
utsDot3Onu2OpticalTransceiverDiagnosisTable OBJECT-TYPE
SYNTAX SEQUENCE OF UtsDot3Onu2OpticalTransceiverDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 ONU Optical Transceiver Diagnosis."
::= { utsDiagnosisPONConfExt 3 }
utsDot3Onu2OpticalTransceiverDiagnosisEntry OBJECT-TYPE
SYNTAX UtsDot3Onu2OpticalTransceiverDiagnosisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 Onu Optical Transceiver Diagnosis table."
INDEX { utsDot3OnuOpticalTransceiverDiagnosisModuleId,utsDot3OnuOpticalTransceiverDiagnosisDeviceId,utsDot3OnuOpticalTransceiverDiagnosisPortId,utsDot3OnuOpticalTransceiverDiagnosisLogicalPortId}
::= { utsDot3Onu2OpticalTransceiverDiagnosisTable 1 }
UtsDot3Onu2OpticalTransceiverDiagnosisEntry ::=
SEQUENCE {
utsDot3OnuOpticalTransceiverDiagnosisModuleId INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisDeviceId INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisPortId INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisLogicalPortId INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTemperature INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisVoltage INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTxBiasCurrent INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTxPower INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisRxPower INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisAlarmOperation INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTempHighAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTempLowAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTempHighWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTempLowWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisVoltageHighAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisVoltageLowAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisVoltageHighWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisVoltageLowWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisBiasHighAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisBiasLowAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisBiasHighWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisBiasLowWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTxPowerHighAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTxPowerLowAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTxPowerHighWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisTxPowerLowWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisRxPowerHighAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisRxPowerLowAlarm INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisRxPowerHighWarning INTEGER,
utsDot3OnuOpticalTransceiverDiagnosisRxPowerLowWarning INTEGER
}
utsDot3OnuOpticalTransceiverDiagnosisModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT module id for the current ONU."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 1 }
utsDot3OnuOpticalTransceiverDiagnosisDeviceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT device id for the current ONU."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 2 }
utsDot3OnuOpticalTransceiverDiagnosisPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the OLT port id for the current ONU."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 3 }
utsDot3OnuOpticalTransceiverDiagnosisLogicalPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value to identifiy the logical port id for the current ONU."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 4 }
utsDot3OnuOpticalTransceiverDiagnosisTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value of the ONU optical temperature, the unit is 1/256 centigrade, the fact range should be -128 to +128."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 5 }
utsDot3OnuOpticalTransceiverDiagnosisVoltage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value of the ONU optical Voltage, the unit is 100 microvolt, the fact range should be 0 to 6.55 volt."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 6 }
utsDot3OnuOpticalTransceiverDiagnosisTxBiasCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value of the ONU optical Tx Bias Current, the unit is 2 microampere, the fact range should be 0 to 131 milliampere."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 7 }
utsDot3OnuOpticalTransceiverDiagnosisTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value of the ONU optical Tx Power, the unit is 0.1 uW, the fact range should be 0 to 6.5535mW."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 8 }
utsDot3OnuOpticalTransceiverDiagnosisRxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only value of the ONU optical Rx Power, the unit is 0.1 uW, the fact range should be 0 to 6.5535mW."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 9 }
utsDot3OnuOpticalTransceiverDiagnosisAlarmOperation OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Alarm Operation."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 12 }
utsDot3OnuOpticalTransceiverDiagnosisTempHighAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Temp High Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 15 }
utsDot3OnuOpticalTransceiverDiagnosisTempLowAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Temp Low Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 16 }
utsDot3OnuOpticalTransceiverDiagnosisTempHighWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Temp High Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 17 }
utsDot3OnuOpticalTransceiverDiagnosisTempLowWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Temp Low Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 18 }
utsDot3OnuOpticalTransceiverDiagnosisVoltageHighAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Voltage High Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 19 }
utsDot3OnuOpticalTransceiverDiagnosisVoltageLowAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Voltage Low Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 20 }
utsDot3OnuOpticalTransceiverDiagnosisVoltageHighWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Voltage High Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 21 }
utsDot3OnuOpticalTransceiverDiagnosisVoltageLowWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Voltage Low Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 22 }
utsDot3OnuOpticalTransceiverDiagnosisBiasHighAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Bias High Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 23 }
utsDot3OnuOpticalTransceiverDiagnosisBiasLowAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Bias Low Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 24 }
utsDot3OnuOpticalTransceiverDiagnosisBiasHighWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Bias High Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 25 }
utsDot3OnuOpticalTransceiverDiagnosisBiasLowWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Bias Low Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 26 }
utsDot3OnuOpticalTransceiverDiagnosisTxPowerHighAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Tx Power High Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 27 }
utsDot3OnuOpticalTransceiverDiagnosisTxPowerLowAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Tx Power Low Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 28 }
utsDot3OnuOpticalTransceiverDiagnosisTxPowerHighWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Tx Power High Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 29 }
utsDot3OnuOpticalTransceiverDiagnosisTxPowerLowWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Tx Power Low Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 30 }
utsDot3OnuOpticalTransceiverDiagnosisRxPowerHighAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Rx Power High Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 31 }
utsDot3OnuOpticalTransceiverDiagnosisRxPowerLowAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Rx Power Low Alarm."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 32 }
utsDot3OnuOpticalTransceiverDiagnosisRxPowerHighWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Rx Power High Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 33 }
utsDot3OnuOpticalTransceiverDiagnosisRxPowerLowWarning OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A setting value of the ONU Rx Power Low Warning."
::= { utsDot3Onu2OpticalTransceiverDiagnosisEntry 34 }
END
View Git Blame Copy Permalink