2439 lines
82 KiB
Plaintext
2439 lines
82 KiB
Plaintext
--******************************************************************************
|
|
--Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
--
|
|
--$Id: fscapw.mib,v 1.1 2013/09/19 13:02:52 siva Exp $
|
|
--
|
|
--Description : This file contains MIB definitions for Supermicro CAPWAP module.
|
|
--
|
|
--******************************************************************************/
|
|
|
|
-- SupermicroISS MIB Definition
|
|
|
|
-- MIB for 'Wireless Switch Solution'
|
|
|
|
-- The 'Wireless Switch Solution' MIB definition is as follows:
|
|
|
|
|
|
SUPERMICRO-CAPWAP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, enterprises, Unsigned32, TimeTicks FROM SNMPv2-SMI
|
|
ifIndex, InterfaceIndex FROM IF-MIB
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
DisplayString, TruthValue, RowStatus, MacAddress,
|
|
DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC;
|
|
|
|
fsCapwap MODULE-IDENTITY
|
|
LAST-UPDATED "201302150000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO
|
|
|
|
"Super Micro Computer Inc.
|
|
E-mail:support@Supermicro.com"
|
|
|
|
DESCRIPTION
|
|
"The enterprise ID 10876 is originally assigned to Super Micro Computer Inc."
|
|
REVISION "201302150000Z"
|
|
|
|
DESCRIPTION
|
|
"The MIB for Supermicro WSS."
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) extended(2) 82 }
|
|
|
|
-- Textual Conventions
|
|
EnabledStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A simple status value for the object."
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
|
|
CapwapBaseRadioIdTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a radio on a WTP."
|
|
SYNTAX Unsigned32 (1..31)
|
|
|
|
|
|
CapwapBaseTunnelModeTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the tunneling modes of operation that are
|
|
supported by a WTP.
|
|
The WTP MAY support more than one option, represented by
|
|
the bit field below:
|
|
localBridging(0) - Local bridging mode
|
|
dot3Tunnel(1) - 802.3 frame tunnel mode
|
|
nativeTunnel(2) - Native frame tunnel mode"
|
|
REFERENCE
|
|
"Section 4.6.43 of CAPWAP Protocol Specification, RFC 5415."
|
|
SYNTAX BITS {
|
|
localBridging(0),
|
|
dot3Tunnel(1),
|
|
nativeTunnel(2)
|
|
}
|
|
|
|
CapwapBaseMacTypeTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the MAC mode of operation supported by a WTP.
|
|
The following enumerated values are supported:
|
|
localMAC(0) - Local-MAC mode
|
|
splitMAC(1) - Split-MAC mode
|
|
both(2) - Both Local-MAC and Split-MAC
|
|
Note that the CAPWAP field [RFC5415] modeled by this
|
|
object takes zero as starting value; this MIB object
|
|
follows that rule."
|
|
REFERENCE
|
|
"Section 4.6.44 of CAPWAP Protocol Specification, RFC 5415."
|
|
SYNTAX INTEGER {
|
|
localMAC(0),
|
|
splitMAC(1),
|
|
both(2)
|
|
}
|
|
|
|
|
|
CapwapBaseStationIdTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1x:"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a station instance.
|
|
As usual, the MAC address of the station is used."
|
|
SYNTAX OCTET STRING (SIZE(6|8))
|
|
|
|
-- The different groups in Supermicro CAPWAP MIB are as follows:
|
|
fsCapwapSystem OBJECT IDENTIFIER ::= { fsCapwap 1 }
|
|
fsCapwapWtpModel OBJECT IDENTIFIER ::= { fsCapwap 2 }
|
|
fsCapwapConfig OBJECT IDENTIFIER ::= { fsCapwap 3 }
|
|
|
|
fsCapwapModuleStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects used to perform CAPWAP enable/disable"
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 1 }
|
|
|
|
fsCapwapSystemControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects used to Shut down CAPWAP module"
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 2 }
|
|
|
|
fsCapwapControlUdpPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure capwap Control channel UDP port number "
|
|
DEFVAL { 5246 }
|
|
::= { fsCapwapSystem 3 }
|
|
|
|
fsCapwapControlChannelDTLSPolicyOptions OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
other(0),
|
|
clear(1),
|
|
dtls(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " The AC communicates its policy on the use of DTLS for
|
|
the CAPWAP Control channel "
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 4 }
|
|
|
|
fsCapwapDataChannelDTLSPolicyOptions OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
other(0),
|
|
clear(1),
|
|
dtls(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " The AC communicates its policy on the use of DTLS for
|
|
the CAPWAP data channel "
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 5 }
|
|
|
|
|
|
fsWlcDiscoveryMode OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
other(0),
|
|
macDiscMode(1),
|
|
autoDiscMode(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure discovery Mode. The supported values are
|
|
MAC Disc Mode (1) (Default) Auto Disc mode (2)"
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 6 }
|
|
|
|
fsCapwapWtpModeIgnore OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to enabled the compatibility between the AP's and WLC's
|
|
MAC and Tunnel modes need not be checked during discovery and any
|
|
mode should be supported by the WLC."
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 7 }
|
|
|
|
fsCapwapDebugMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable Trace Statements in
|
|
CAPWAP Module.
|
|
|
|
A FOUR BYTE integer is used for enabling the level of tracing.
|
|
Each BIT in the four byte integer, represents a particular
|
|
level of Trace.
|
|
|
|
The maping between the bit positions & the level of trace is
|
|
as follows
|
|
0 - Fn Entry Traces
|
|
1 - Fn Exit Traces
|
|
2 - Packet Traces
|
|
3 - Response Traces
|
|
4 - All
|
|
The remaining bits are unused. Combination of levels are
|
|
also allowed.
|
|
|
|
The user has to enter the corresponding Integer32 VALUE for the
|
|
bits set. For example if bits 0 and 1 are set then user has to
|
|
give the value 3."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapSystem 8 }
|
|
|
|
fsDtlsDebugMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable Trace Statements in
|
|
DTLS Module.
|
|
|
|
A FOUR BYTE integer is used for enabling the level of tracing.
|
|
Each BIT in the four byte integer, represents a particular
|
|
level of Trace.
|
|
|
|
The maping between the bit positions & the level of trace is
|
|
as follows
|
|
0 - Fn Entry Traces
|
|
1 - Fn Exit Traces
|
|
2 - Packet Traces
|
|
3 - Response Traces
|
|
4 - All
|
|
The remaining bits are unused. Combination of levels are
|
|
also allowed.
|
|
|
|
The user has to enter the corresponding Integer32 VALUE for the
|
|
bits set. For example if bits 0 and 1 are set then user has to
|
|
give the value 3."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapSystem 9 }
|
|
|
|
fsDtlsEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
preShared (1),
|
|
certificates (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the encryption tyep for DTLS."
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 10 }
|
|
|
|
fsDtlsEncryptAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aes128 (1),
|
|
dheaes128 (2),
|
|
aes256 (3),
|
|
dhaaes256 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the encryption Algoritham."
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapSystem 11 }
|
|
|
|
fsStationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto (0),
|
|
blacklist (1),
|
|
whitelist (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects used to identify whether the station type is blacklist or whitelist"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapSystem 12 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * fsWtpModel TABLE
|
|
-- **********************************************************************
|
|
fsWtpModelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsWtpModelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table to manage the WTP based on model number. This table contains
|
|
the default parameters for each Model number. This table is mandatory
|
|
for a WTP to connect to AC."
|
|
::= { fsCapwapWtpModel 1 }
|
|
|
|
fsWtpModelEntry OBJECT-TYPE
|
|
SYNTAX FsWtpModelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each model number.
|
|
Index to this table is the WTP Profile Model Number."
|
|
INDEX { fsCapwapWtpModelNumber }
|
|
::= { fsWtpModelTable 1 }
|
|
|
|
FsWtpModelEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapWtpModelNumber SnmpAdminString,
|
|
fsNoOfRadio CapwapBaseRadioIdTC,
|
|
fsCapwapWtpMacType CapwapBaseMacTypeTC,
|
|
fsCapwapWtpTunnelMode CapwapBaseTunnelModeTC,
|
|
fsCapwapSwVersion DisplayString,
|
|
fsCapwapImageName DisplayString,
|
|
fsCapwapQosProfileName OCTET STRING,
|
|
fsMaxStations Integer32,
|
|
fsWtpModelRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapWtpModelNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the model number of a WTP.
|
|
A WTP profile MUST include the WTP's model number, which
|
|
reflects the number of Physical Layer (PHY) radios on the WTP.
|
|
In this way, the creation of a WTP profile triggers the AC
|
|
to automatically create the same number of WTP Virtual Radio
|
|
Interfaces corresponding to the WTP's PHY radios without
|
|
manual intervention. With the ifIndexes of WTP Virtual
|
|
Radio Interfaces, the operator could configure and manage
|
|
the WTP's PHY radios through the wireless binding MIB
|
|
modules."
|
|
::= { fsWtpModelEntry 1 }
|
|
|
|
fsNoOfRadio OBJECT-TYPE
|
|
SYNTAX CapwapBaseRadioIdTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of radio interface for the
|
|
specific model number."
|
|
::= { fsWtpModelEntry 2 }
|
|
|
|
fsCapwapWtpMacType OBJECT-TYPE
|
|
SYNTAX CapwapBaseMacTypeTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the default MAC type for the specific model
|
|
number."
|
|
DEFVAL { 0 }
|
|
::= { fsWtpModelEntry 3 }
|
|
|
|
fsCapwapWtpTunnelMode OBJECT-TYPE
|
|
SYNTAX CapwapBaseTunnelModeTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the default Tunnel mode for the specific model
|
|
number."
|
|
DEFVAL { 0 }
|
|
::= { fsWtpModelEntry 4 }
|
|
|
|
fsCapwapSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represent the WTP Sw version."
|
|
::= { fsWtpModelEntry 5 }
|
|
|
|
fsCapwapImageName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..23))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Image name that can be used for
|
|
the given model number."
|
|
::= { fsWtpModelEntry 6 }
|
|
|
|
fsCapwapQosProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Qos pofile used for the given WTP model."
|
|
::= {fsWtpModelEntry 7 }
|
|
|
|
fsMaxStations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of stations associated with the given WTP model."
|
|
::= {fsWtpModelEntry 8 }
|
|
|
|
fsWtpModelRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsWtpModelRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsWtpModelEntry 9 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsWtpRadio TABLE
|
|
-- **********************************************************************
|
|
fsWtpRadioTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsWtpRadioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table to manage the WTP radio for each model number. This table contains
|
|
the default radio parameters for each Model number. This table is mandatory
|
|
for a WTP to connect to AC."
|
|
::= { fsCapwapWtpModel 2 }
|
|
|
|
fsWtpRadioEntry OBJECT-TYPE
|
|
SYNTAX FsWtpRadioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry appears in this table for each radio for a specific model number.
|
|
Index to this table is the WTP Profile Model Number and number of radio."
|
|
INDEX { fsCapwapWtpModelNumber, fsRadioNumber }
|
|
::= { fsWtpRadioTable 1 }
|
|
|
|
FsWtpRadioEntry ::=
|
|
SEQUENCE {
|
|
fsRadioNumber CapwapBaseRadioIdTC,
|
|
fsWtpRadioType INTEGER,
|
|
fsRadioAdminStatus EnabledStatus,
|
|
fsWtpRadioRowStatus RowStatus
|
|
}
|
|
|
|
fsRadioNumber OBJECT-TYPE
|
|
SYNTAX CapwapBaseRadioIdTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of radio interface for the
|
|
specific model number."
|
|
::= { fsWtpRadioEntry 1 }
|
|
|
|
fsWtpRadioType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b (1),
|
|
dot11a (2),
|
|
dot11g (4),
|
|
dot11bg (5),
|
|
dot11an (10),
|
|
dot11bgn (13)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the default radio type for each radio of a
|
|
specific model number."
|
|
DEFVAL { dot11b }
|
|
::= { fsWtpRadioEntry 2 }
|
|
|
|
fsRadioAdminStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the default admin status for the radio interface."
|
|
DEFVAL { enabled }
|
|
::= { fsWtpRadioEntry 3 }
|
|
|
|
fsWtpRadioRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsWtpRadioRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsWtpRadioEntry 4 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsCapwapWhiteList TABLE
|
|
-- **********************************************************************
|
|
fsCapwapWhiteListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapWhiteListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the List of WTP MAC address which needs to
|
|
serviced by WLC."
|
|
::= { fsCapwapConfig 1 }
|
|
|
|
fsCapwapWhiteListEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapWhiteListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the List of WTP MAC address which needs to
|
|
serviced by WLC."
|
|
INDEX { fsCapwapWhiteListId }
|
|
::= { fsCapwapWhiteListTable 1 }
|
|
|
|
FsCapwapWhiteListEntry ::=
|
|
SEQUENCE { fsCapwapWhiteListId Unsigned32,
|
|
fsCapwapWhiteListWtpBaseMac MacAddress,
|
|
fsCapwapWhiteListRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapWhiteListId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique White List profile id."
|
|
::= { fsCapwapWhiteListEntry 1 }
|
|
|
|
fsCapwapWhiteListWtpBaseMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the WTP BASE MAC to proivide the service"
|
|
::= { fsCapwapWhiteListEntry 2 }
|
|
|
|
fsCapwapWhiteListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapWhiteListRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapWhiteListEntry 3 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsWssBlackList TABLE
|
|
-- **********************************************************************
|
|
|
|
fsCapwapBlackListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapBlackListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the List of WTP MAC address which should not
|
|
be serviced by WLC."
|
|
::= { fsCapwapConfig 2 }
|
|
|
|
fsCapwapBlackListEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapBlackListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the List of WTP MAC address which should not
|
|
be serviced by WLC."
|
|
INDEX { fsCapwapBlackListId }
|
|
::= { fsCapwapBlackListTable 1 }
|
|
|
|
FsCapwapBlackListEntry ::=
|
|
SEQUENCE { fsCapwapBlackListId Unsigned32,
|
|
fsCapwapBlackListWtpBaseMac MacAddress,
|
|
fsCapwapBlackListRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapBlackListId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique Black List profile id."
|
|
::= { fsCapwapBlackListEntry 1 }
|
|
|
|
fsCapwapBlackListWtpBaseMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the WTP BASE MAC address."
|
|
::= { fsCapwapBlackListEntry 2 }
|
|
|
|
fsCapwapBlackListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapBlackListRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapBlackListEntry 3 }
|
|
|
|
-- *********************************************************************
|
|
-- * fsCapwapWtpConfig TABLE
|
|
-- *********************************************************************
|
|
fsCapwapWtpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapWtpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" WTP Reset configuration or WTP Clear configuration."
|
|
::= {fsCapwapConfig 3 }
|
|
|
|
fsCapwapWtpConfigEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapWtpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This entry used to reset the WTP."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= {fsCapwapWtpConfigTable 1 }
|
|
|
|
FsCapwapWtpConfigEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapWtpReset INTEGER,
|
|
fsCapwapClearConfig INTEGER,
|
|
fsWtpDiscoveryType INTEGER,
|
|
fsWtpCountryString OCTET STRING,
|
|
fsWtpCrashDumpFileName DisplayString,
|
|
fsWtpMemoryDumpFileName DisplayString,
|
|
fsWtpDeleteOperation INTEGER,
|
|
fsCapwapClearApStats INTEGER,
|
|
fsCapwapWtpConfigRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapWtpReset OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the given WTP."
|
|
DEFVAL { disabled }
|
|
::= {fsCapwapWtpConfigEntry 1}
|
|
|
|
fsCapwapClearConfig OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear the configuration for the given WTP."
|
|
DEFVAL { disabled }
|
|
::= {fsCapwapWtpConfigEntry 2}
|
|
|
|
fsWtpDiscoveryType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
static (1),
|
|
dhcp (2),
|
|
dns (3),
|
|
acReferral (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the WTP discovery type."
|
|
DEFVAL { acReferral }
|
|
::= { fsCapwapWtpConfigEntry 3 }
|
|
|
|
fsWtpCountryString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute identifies the country or non-country
|
|
entity in which the station is operating. If it is a
|
|
country, the first two octets of this
|
|
string is the two character country code as described
|
|
in document ISO/IEC 3166-1. The third octet shall
|
|
be one of the following:
|
|
1. an ASCII space character, if the regulations under
|
|
which the station is operating encompass all
|
|
environments in the country,
|
|
2. an ASCII 'O' character, if the regulations under
|
|
which the station is operating are for an Outdoor
|
|
environment only, or
|
|
3. an ASCII 'I' character, if the regulations under
|
|
which the station is operating are for an Indoor
|
|
environment only.
|
|
4. an ASCII 'X' character, if the station is operating
|
|
under a non-country entity. The first two octets of the
|
|
non-country entity shall be two ASCII 'XX' characters."
|
|
::= { fsCapwapWtpConfigEntry 4 }
|
|
|
|
fsWtpCrashDumpFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wtp Crash Dump filename."
|
|
::= { fsCapwapWtpConfigEntry 5 }
|
|
|
|
|
|
fsWtpMemoryDumpFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wtp Memory Dump filename."
|
|
::= { fsCapwapWtpConfigEntry 6 }
|
|
|
|
fsWtpDeleteOperation OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled will delete the crash file received for an AP."
|
|
DEFVAL { disabled }
|
|
::= { fsCapwapWtpConfigEntry 7 }
|
|
|
|
fsCapwapClearApStats OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled clear all AP related stats in WLC."
|
|
DEFVAL { disabled }
|
|
::= { fsCapwapWtpConfigEntry 8 }
|
|
|
|
fsCapwapWtpConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapWtpConfigRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapWtpConfigEntry 9 }
|
|
|
|
-- **********************************************************************
|
|
-- fsCapwapLinkEncryption
|
|
-- **********************************************************************
|
|
fsCapwapLinkEncryptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapLinkEncryptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WTP DTLS configuration for Data and Control channel."
|
|
::= { fsCapwapConfig 4 }
|
|
|
|
fsCapwapLinkEncryptionEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapLinkEncryptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the fsCapwapLinkEncryptionTable representing the DTLS configuration
|
|
for Control and data chennal."
|
|
INDEX { capwapBaseWtpProfileId, fsCapwapEncryptChannel }
|
|
::= { fsCapwapLinkEncryptionTable 1 }
|
|
|
|
FsCapwapLinkEncryptionEntry ::=
|
|
SEQUENCE { fsCapwapEncryptChannel INTEGER,
|
|
fsCapwapEncryptChannelStatus EnabledStatus,
|
|
fsCapwapEncryptChannelRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapEncryptChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
control (1),
|
|
data (2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the channel type either control channel or data channel."
|
|
::= { fsCapwapLinkEncryptionEntry 1 }
|
|
|
|
fsCapwapEncryptChannelStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DTLS configuration enable or disabled for given WTP."
|
|
DEFVAL { disabled }
|
|
::= {fsCapwapLinkEncryptionEntry 2}
|
|
|
|
fsCapwapEncryptChannelRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapEncryptChannelRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapLinkEncryptionEntry 3 }
|
|
|
|
-- **********************************************************************
|
|
-- fsCapwapDefaultWtpProfile
|
|
-- **********************************************************************
|
|
|
|
fsCapwapDefaultWtpProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapDefaultWtpProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that configure Default WTP profiles."
|
|
::= { fsCapwapConfig 5 }
|
|
|
|
fsCapwapDefaultWtpProfileEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapDefaultWtpProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that configures and displays a WTP profile."
|
|
INDEX { fsCapwapWtpModelNumber }
|
|
::= { fsCapwapDefaultWtpProfileTable 1 }
|
|
|
|
FsCapwapDefaultWtpProfileEntry ::= SEQUENCE {
|
|
fsCapwapDefaultQosProfile OCTET STRING,
|
|
fsCapwapDefaultWtpProfileRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapDefaultQosProfile OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the default Qos Profile string to be used for this
|
|
model."
|
|
::= { fsCapwapDefaultWtpProfileEntry 1 }
|
|
|
|
fsCapwapDefaultWtpProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapDefaultWtpProfileRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapDefaultWtpProfileEntry 2 }
|
|
|
|
--**************************************************************************
|
|
-- fsCawapDnsProfile
|
|
--**************************************************************************
|
|
fsCapwapDnsProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapDnsProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the discovery type configured for WTP."
|
|
::= { fsCapwapConfig 6}
|
|
|
|
|
|
fsCapwapDnsProfileEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapDnsProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configure the DNS profile for the given WTP."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsCapwapDnsProfileTable 1 }
|
|
|
|
FsCapwapDnsProfileEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapDnsAddressType InetAddressType,
|
|
fsCapwapDnsServerIp InetAddress,
|
|
fsCapwapDnsDomainName SnmpAdminString,
|
|
fsCapwapDnsProfileRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapDnsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (ipv4 or ipv6) type of Nameserver's address."
|
|
DEFVAL { ipv4 }
|
|
::= { fsCapwapDnsProfileEntry 1 }
|
|
|
|
fsCapwapDnsServerIp OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It represents the static IP address of the DNS server.The format of this IP address is determined by the
|
|
corresponding instance of object"
|
|
::= { fsCapwapDnsProfileEntry 2 }
|
|
|
|
fsCapwapDnsDomainName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It Represents the DNS Serve Domain Name Suffix."
|
|
::= { fsCapwapDnsProfileEntry 3 }
|
|
|
|
fsCapwapDnsProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsWtpModelRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapDnsProfileEntry 4 }
|
|
|
|
-- **********************************************************************
|
|
-- * fsWtpNativeVlanIdTable TABLE
|
|
-- **********************************************************************
|
|
|
|
fsWtpNativeVlanIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsWtpNativeVlanIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the native vlan id configured for WTP."
|
|
::= { fsCapwapConfig 7 }
|
|
|
|
fsWtpNativeVlanIdEntry OBJECT-TYPE
|
|
SYNTAX FsWtpNativeVlanIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configure the native vlan id used by WTP."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsWtpNativeVlanIdTable 1 }
|
|
|
|
FsWtpNativeVlanIdEntry ::=
|
|
SEQUENCE {
|
|
fsWtpNativeVlanId Integer32,
|
|
fsWtpNativeVlanIdRowStatus RowStatus
|
|
}
|
|
|
|
fsWtpNativeVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the WTP Native Vlan Id."
|
|
DEFVAL { 0 }
|
|
::= { fsWtpNativeVlanIdEntry 1 }
|
|
|
|
fsWtpNativeVlanIdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsWtpNativeVlanIdRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsWtpNativeVlanIdEntry 2 }
|
|
|
|
--**************************************************************************
|
|
-- fsCawapDiscStats TABLE
|
|
--**************************************************************************
|
|
fsCawapDiscStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCawapDiscStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the CAPWAP discovery statistics."
|
|
::= { fsCapwapConfig 8 }
|
|
|
|
fsCawapDiscStatsEntry OBJECT-TYPE
|
|
SYNTAX FsCawapDiscStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Set of Objects that mantains the CAPWAP Discovery state statistics."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsCawapDiscStatsTable 1 }
|
|
|
|
FsCawapDiscStatsEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapDiscReqReceived Unsigned32,
|
|
fsCapwapDiscRspReceived Unsigned32,
|
|
fsCapwapDiscReqTransmitted Unsigned32,
|
|
fsCapwapDiscRspTransmitted Unsigned32,
|
|
fsCapwapDiscunsuccessfulProcessed Unsigned32,
|
|
fsCapwapDiscLastUnsuccAttemptReason Integer32,
|
|
fsCapwapDiscLastSuccAttemptTime TimeTicks,
|
|
fsCapwapDiscLastUnsuccessfulAttemptTime TimeTicks,
|
|
fsCapwapDiscStatsRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapDiscReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of discovery requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapDiscStatsEntry 1 }
|
|
|
|
fsCapwapDiscRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of discovery responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapDiscStatsEntry 2 }
|
|
|
|
fsCapwapDiscReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of discovery requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapDiscStatsEntry 3 }
|
|
|
|
fsCapwapDiscRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of discovery responses Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapDiscStatsEntry 4 }
|
|
|
|
fsCapwapDiscunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of discovery packets dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapDiscStatsEntry 5 }
|
|
|
|
fsCapwapDiscLastUnsuccAttemptReason OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapDiscStatsEntry 6 }
|
|
|
|
fsCapwapDiscLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time."
|
|
::= { fsCawapDiscStatsEntry 7 }
|
|
|
|
fsCapwapDiscLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time."
|
|
::= { fsCawapDiscStatsEntry 8 }
|
|
|
|
fsCapwapDiscStatsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapDiscStatsRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCawapDiscStatsEntry 9 }
|
|
|
|
--**************************************************************************
|
|
-- fsCawapJoinStats TABLE
|
|
--**************************************************************************
|
|
fsCawapJoinStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCawapJoinStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the CAPWAP discovery statistics."
|
|
::= { fsCapwapConfig 9 }
|
|
|
|
fsCawapJoinStatsEntry OBJECT-TYPE
|
|
SYNTAX FsCawapJoinStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Set of Objects that mantains the CAPWAP Join state statistics."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsCawapJoinStatsTable 1 }
|
|
|
|
FsCawapJoinStatsEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapJoinReqReceived Unsigned32,
|
|
fsCapwapJoinRspReceived Unsigned32,
|
|
fsCapwapJoinReqTransmitted Unsigned32,
|
|
fsCapwapJoinRspTransmitted Unsigned32,
|
|
fsCapwapJoinunsuccessfulProcessed Unsigned32,
|
|
fsCapwapJoinReasonLastUnsuccAttempt Integer32,
|
|
fsCapwapJoinLastSuccAttemptTime TimeTicks,
|
|
fsCapwapJoinLastUnsuccAttemptTime TimeTicks,
|
|
fsCapwapJoinStatsRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapJoinReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapJoinStatsEntry 1 }
|
|
|
|
fsCapwapJoinRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapJoinStatsEntry 2}
|
|
|
|
fsCapwapJoinReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join requests transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapJoinStatsEntry 3}
|
|
|
|
fsCapwapJoinRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join Responses transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapJoinStatsEntry 4}
|
|
|
|
fsCapwapJoinunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join packets dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapJoinStatsEntry 5}
|
|
|
|
fsCapwapJoinReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapJoinStatsEntry 6 }
|
|
|
|
fsCapwapJoinLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time."
|
|
::= { fsCawapJoinStatsEntry 7 }
|
|
|
|
fsCapwapJoinLastUnsuccAttemptTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time."
|
|
::= { fsCawapJoinStatsEntry 8 }
|
|
|
|
fsCapwapJoinStatsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapJoinStatsRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCawapJoinStatsEntry 9 }
|
|
|
|
--**************************************************************************
|
|
-- fsCawapConfigStats TABLE
|
|
--**************************************************************************
|
|
fsCawapConfigStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCawapConfigStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the CAPWAP Configuration status statistics."
|
|
::= { fsCapwapConfig 10 }
|
|
|
|
fsCawapConfigStatsEntry OBJECT-TYPE
|
|
SYNTAX FsCawapConfigStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Set of Objects that mantains the CAPWAP Config state statistics."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsCawapConfigStatsTable 1 }
|
|
|
|
FsCawapConfigStatsEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapConfigReqReceived Unsigned32,
|
|
fsCapwapConfigRspReceived Unsigned32,
|
|
fsCapwapConfigReqTransmitted Unsigned32,
|
|
fsCapwapConfigRspTransmitted Unsigned32,
|
|
fsCapwapConfigunsuccessfulProcessed Unsigned32,
|
|
fsCapwapConfigReasonLastUnsuccAttempt Integer32,
|
|
fsCapwapConfigLastSuccAttemptTime TimeTicks,
|
|
fsCapwapConfigLastUnsuccessfulAttemptTime TimeTicks,
|
|
fsCapwapConfigStatsRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapConfigReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapConfigStatsEntry 1 }
|
|
|
|
fsCapwapConfigRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapConfigStatsEntry 2}
|
|
|
|
fsCapwapConfigReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join requests transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapConfigStatsEntry 3}
|
|
|
|
fsCapwapConfigRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join Responses transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapConfigStatsEntry 4}
|
|
|
|
fsCapwapConfigunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Join packets dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapConfigStatsEntry 5}
|
|
|
|
fsCapwapConfigReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapConfigStatsEntry 6 }
|
|
|
|
fsCapwapConfigLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time."
|
|
::= { fsCawapConfigStatsEntry 7 }
|
|
|
|
fsCapwapConfigLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time."
|
|
::= { fsCawapConfigStatsEntry 8 }
|
|
|
|
fsCapwapConfigStatsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapConfigStatsRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCawapConfigStatsEntry 9 }
|
|
|
|
--**************************************************************************
|
|
-- fsCawapRunStats TABLE
|
|
--**************************************************************************
|
|
fsCawapRunStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCawapRunStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the CAPWAP Run state level statistics."
|
|
::= { fsCapwapConfig 11 }
|
|
|
|
fsCawapRunStatsEntry OBJECT-TYPE
|
|
SYNTAX FsCawapRunStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Set of Objects that mantains the CAPWAP Run state statistics."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsCawapRunStatsTable 1 }
|
|
|
|
FsCawapRunStatsEntry ::=
|
|
SEQUENCE {
|
|
fsCapwapRunConfigUpdateReqReceived Unsigned32,
|
|
fsCapwapRunConfigUpdateRspReceived Unsigned32,
|
|
fsCapwapRunConfigUpdateReqTransmitted Unsigned32,
|
|
fsCapwapRunConfigUpdateRspTransmitted Unsigned32,
|
|
fsCapwapRunConfigUpdateunsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunConfigUpdateReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunConfigUpdateLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunConfigUpdateLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunStationConfigReqReceived Unsigned32,
|
|
fsCapwapRunStationConfigRspReceived Unsigned32,
|
|
fsCapwapRunStationConfigReqTransmitted Unsigned32,
|
|
fsCapwapRunStationConfigRspTransmitted Unsigned32,
|
|
fsCapwapRunStationConfigunsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunStationConfigReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunStationConfigLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunStationConfigLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunClearConfigReqReceived Unsigned32,
|
|
fsCapwapRunClearConfigRspReceived Unsigned32,
|
|
fsCapwapRunClearConfigReqTransmitted Unsigned32,
|
|
fsCapwapRunClearConfigRspTransmitted Unsigned32,
|
|
fsCapwapRunClearConfigunsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunClearConfigReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunClearConfigLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunClearConfigLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunDataTransferReqReceived Unsigned32,
|
|
fsCapwapRunDataTransferRspReceived Unsigned32,
|
|
fsCapwapRunDataTransferReqTransmitted Unsigned32,
|
|
fsCapwapRunDataTransferRspTransmitted Unsigned32,
|
|
fsCapwapRunDataTransferunsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunDataTransferReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunDataTransferLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunDataTransferLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunResetReqReceived Unsigned32,
|
|
fsCapwapRunResetRspReceived Unsigned32,
|
|
fsCapwapRunResetReqTransmitted Unsigned32,
|
|
fsCapwapRunResetRspTransmitted Unsigned32,
|
|
fsCapwapRunResetunsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunResetReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunResetLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunResetLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunPriDiscReqReceived Unsigned32,
|
|
fsCapwapRunPriDiscRspReceived Unsigned32,
|
|
fsCapwapRunPriDiscReqTransmitted Unsigned32,
|
|
fsCapwapRunPriDiscRspTransmitted Unsigned32,
|
|
fsCapwapRunPriDiscunsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunPriDiscReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunPriDiscLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunPriDiscLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunEchoReqReceived Unsigned32,
|
|
fsCapwapRunEchoRspReceived Unsigned32,
|
|
fsCapwapRunEchoReqTransmitted Unsigned32,
|
|
fsCapwapRunEchoRspTransmitted Unsigned32,
|
|
fsCapwapRunEchounsuccessfulProcessed Unsigned32,
|
|
fsCapwapRunEchoReasonLastUnsuccAttempt SnmpAdminString,
|
|
fsCapwapRunEchoLastSuccAttemptTime DateAndTime,
|
|
fsCapwapRunEchoLastUnsuccessfulAttemptTime DateAndTime,
|
|
fsCapwapRunStatsRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapRunConfigUpdateReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config update requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 1 }
|
|
|
|
fsCapwapRunConfigUpdateRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config update Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 2 }
|
|
|
|
fsCapwapRunConfigUpdateReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config update requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 3 }
|
|
|
|
fsCapwapRunConfigUpdateRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config update response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 4 }
|
|
|
|
fsCapwapRunConfigUpdateunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Config update message dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 5 }
|
|
|
|
fsCapwapRunConfigUpdateReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for configuration update request message or configuratin update response message."
|
|
::= { fsCawapRunStatsEntry 6 }
|
|
|
|
fsCapwapRunConfigUpdateLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
configuration update request message or configuratin update response message."
|
|
::= { fsCawapRunStatsEntry 7 }
|
|
|
|
fsCapwapRunConfigUpdateLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
configuration update request message or configuratin update response message."
|
|
::= { fsCawapRunStatsEntry 8 }
|
|
|
|
fsCapwapRunStationConfigReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Station Config requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 9 }
|
|
|
|
fsCapwapRunStationConfigRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Station Config Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 10 }
|
|
|
|
fsCapwapRunStationConfigReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Station Config requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 11 }
|
|
|
|
fsCapwapRunStationConfigRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Station Config response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 12 }
|
|
|
|
fsCapwapRunStationConfigunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Station Configuration requests message dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 13 }
|
|
|
|
fsCapwapRunStationConfigReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for station configuration request message or station configuratin response message."
|
|
::= { fsCawapRunStatsEntry 14 }
|
|
|
|
fsCapwapRunStationConfigLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
Station configuration request message or station configuratin response message."
|
|
::= { fsCawapRunStatsEntry 15 }
|
|
|
|
fsCapwapRunStationConfigLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
Station configuration request message or station configuratin response message."
|
|
::= { fsCawapRunStatsEntry 16 }
|
|
|
|
fsCapwapRunClearConfigReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Clear Config requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 17 }
|
|
|
|
fsCapwapRunClearConfigRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Clear Config Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 18 }
|
|
|
|
fsCapwapRunClearConfigReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Clear Config requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 19 }
|
|
|
|
fsCapwapRunClearConfigRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Clear Config response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 20 }
|
|
|
|
fsCapwapRunClearConfigunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Clear Configuration messages dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 21 }
|
|
|
|
fsCapwapRunClearConfigReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for Clear configuration request message or clear configuratin response message."
|
|
::= { fsCawapRunStatsEntry 22 }
|
|
|
|
fsCapwapRunClearConfigLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
Station configuration request message or station configuratin response message."
|
|
::= { fsCawapRunStatsEntry 23 }
|
|
|
|
fsCapwapRunClearConfigLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
Clear configuration request message or clear configuratin response message."
|
|
::= { fsCawapRunStatsEntry 24 }
|
|
|
|
fsCapwapRunDataTransferReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Data Transfer requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 25 }
|
|
|
|
fsCapwapRunDataTransferRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Data Transfer Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 26 }
|
|
|
|
fsCapwapRunDataTransferReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Data Transfer requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 27 }
|
|
|
|
fsCapwapRunDataTransferRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Data Transfer response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 28 }
|
|
|
|
fsCapwapRunDataTransferunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of data transfer request or data transfer response messages dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 29 }
|
|
|
|
fsCapwapRunDataTransferReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for data transfer request message or data transfer response messages."
|
|
::= { fsCawapRunStatsEntry 30 }
|
|
|
|
fsCapwapRunDataTransferLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
data transfer request message or data transfer response message."
|
|
::= { fsCawapRunStatsEntry 31 }
|
|
|
|
fsCapwapRunDataTransferLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
data transfer request message or data transfer response message."
|
|
::= { fsCawapRunStatsEntry 32 }
|
|
|
|
fsCapwapRunResetReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Reset requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 33 }
|
|
|
|
fsCapwapRunResetRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Reset Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 34 }
|
|
|
|
fsCapwapRunResetReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Reset requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 35 }
|
|
|
|
fsCapwapRunResetRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Reset response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 36 }
|
|
|
|
fsCapwapRunResetunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of data transfer request or data transfer response messages dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 37 }
|
|
|
|
fsCapwapRunResetReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for data transfer request message or data transfer response messages."
|
|
::= { fsCawapRunStatsEntry 38 }
|
|
|
|
fsCapwapRunResetLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
reset request message or reset response message."
|
|
::= { fsCawapRunStatsEntry 39 }
|
|
|
|
fsCapwapRunResetLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
reset request message or reset response message."
|
|
::= { fsCawapRunStatsEntry 40 }
|
|
|
|
fsCapwapRunPriDiscReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Primary discovery requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 41 }
|
|
|
|
fsCapwapRunPriDiscRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Primary discovery Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 42 }
|
|
|
|
fsCapwapRunPriDiscReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Primary discovery requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 43 }
|
|
|
|
fsCapwapRunPriDiscRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of primary discovery response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 44 }
|
|
|
|
fsCapwapRunPriDiscunsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of primary discovery request or primary discovery response messages dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 45 }
|
|
|
|
fsCapwapRunPriDiscReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for primary discovery request message or primary discovery response messages."
|
|
::= { fsCawapRunStatsEntry 46 }
|
|
|
|
fsCapwapRunPriDiscLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
primary discovery request message or primary discovery response message."
|
|
::= { fsCawapRunStatsEntry 47 }
|
|
|
|
fsCapwapRunPriDiscLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
primary discocery request message or primary discovery response message."
|
|
::= { fsCawapRunStatsEntry 48 }
|
|
|
|
fsCapwapRunEchoReqReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Echo requests received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 49 }
|
|
|
|
fsCapwapRunEchoRspReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Echo Responses received."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 50 }
|
|
|
|
fsCapwapRunEchoReqTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Echo requests Transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 51 }
|
|
|
|
fsCapwapRunEchoRspTransmitted OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Echo response transmitted."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 52 }
|
|
|
|
fsCapwapRunEchounsuccessfulProcessed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Number of Echo request or Echo response messages dropped."
|
|
DEFVAL { 0 }
|
|
::= { fsCawapRunStatsEntry 53 }
|
|
|
|
fsCapwapRunEchoReasonLastUnsuccAttempt OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reason for last un-successful attempt
|
|
for echo request message or echo response messages."
|
|
::= { fsCawapRunStatsEntry 54 }
|
|
|
|
fsCapwapRunEchoLastSuccAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last successful data and time for
|
|
echo request message or echoresponse message."
|
|
::= { fsCawapRunStatsEntry 55 }
|
|
|
|
fsCapwapRunEchoLastUnsuccessfulAttemptTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Last unsuccessful date and time for
|
|
echo request message or echo response message."
|
|
::= { fsCawapRunStatsEntry 56 }
|
|
|
|
fsCapwapRunStatsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapRunStatsRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCawapRunStatsEntry 57 }
|
|
|
|
-- fsCapwapWirelessBinding Table
|
|
|
|
fsCapwapWirelessBindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapWirelessBindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that display the mappings between
|
|
WTP Virtual Radio Interfaces and PHY radios."
|
|
::= { fsCapwapConfig 12 }
|
|
|
|
fsCapwapWirelessBindingEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapWirelessBindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that displays the mapping between
|
|
a specific WTP Virtual Radio Interface and a PHY
|
|
radio."
|
|
INDEX {
|
|
capwapBaseWtpProfileId,
|
|
capwapBaseWirelessBindingRadioId
|
|
}
|
|
::= { fsCapwapWirelessBindingTable 1 }
|
|
|
|
FsCapwapWirelessBindingEntry ::= SEQUENCE {
|
|
fsCapwapWirelessBindingVirtualRadioIfIndex InterfaceIndex,
|
|
fsCapwapWirelessBindingType INTEGER,
|
|
fsCapwapWirelessBindingRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapWirelessBindingVirtualRadioIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index value that uniquely identifies a
|
|
WLAN Virtual Radio Interface. The interface identified by
|
|
a particular value of this index is the same interface as
|
|
identified by the same value of the ifIndex.
|
|
Before WTPs contact the AC to get configuration,
|
|
the operator configures WTP profiles for them.
|
|
The creation of a WTP profile triggers the system to
|
|
automatically create a specific number of WTP Virtual Radio
|
|
Interfaces and add a new row object in the
|
|
capwapBaseWirelessBindingTable without manual intervention.
|
|
As most MIB modules use the ifIndex to identify an interface
|
|
for configuration and statistical data (for example, the IEEE
|
|
802.11 MIB module [IEEE.802-11.2007]), it will be easy to
|
|
reuse other wireless binding MIB modules through the WTP
|
|
Virtual Radio Interface in the Centralized WLAN
|
|
Architecture."
|
|
::= { fsCapwapWirelessBindingEntry 1 }
|
|
|
|
fsCapwapWirelessBindingType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11(1),
|
|
epc(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the wireless binding type for the radio.
|
|
The following enumerated values are supported:
|
|
dot11(1) - IEEE 802.11
|
|
epc(3) - EPCGlobal"
|
|
REFERENCE
|
|
"Section 4.3 of CAPWAP Protocol Specification, RFC 5415."
|
|
DEFVAL { 1 }
|
|
::= { fsCapwapWirelessBindingEntry 2 }
|
|
|
|
fsCapwapWirelessBindingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapAuthenticationRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapWirelessBindingEntry 3 }
|
|
|
|
-- End of fsCapwapWirelessBindingTable Table
|
|
|
|
-- **********************************************************************
|
|
-- fsCapwapStationWhiteList Table
|
|
-- **********************************************************************
|
|
|
|
fsCapwapStationWhiteListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapStationWhiteListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that configure station Access Control
|
|
Lists (ACLs). The WTP will provide service to
|
|
the MAC addresses configured in this table.Values of all
|
|
read-create objects in this table are persistent at AC restart/reboot."
|
|
::={ fsCapwapConfig 13 }
|
|
|
|
fsCapwapStationWhiteListEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapStationWhiteListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that configures station White List Table ."
|
|
INDEX { fsCapwapStationWhiteListId }
|
|
::= { fsCapwapStationWhiteListTable 1 }
|
|
|
|
FsCapwapStationWhiteListEntry ::= SEQUENCE
|
|
{
|
|
fsCapwapStationWhiteListId Unsigned32,
|
|
fsCapwapStationWhiteListStationId CapwapBaseStationIdTC,
|
|
fsCapwapStationWhiteListRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapStationWhiteListId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of an Station White List."
|
|
::= { fsCapwapStationWhiteListEntry 1 }
|
|
|
|
fsCapwapStationWhiteListStationId OBJECT-TYPE
|
|
SYNTAX CapwapBaseStationIdTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the MAC address of a station to which WTPs will
|
|
provides service."
|
|
::= { fsCapwapStationWhiteListEntry 2 }
|
|
|
|
fsCapwapStationWhiteListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapStationWhiteListRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapStationWhiteListEntry 3 }
|
|
|
|
-- **********************************************************************
|
|
-- fsCapwapWtpRebootStatistics Table
|
|
-- **********************************************************************
|
|
fsCapwapWtpRebootStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapWtpRebootStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that contain the WTP reboot statistics;"
|
|
::={ fsCapwapConfig 14 }
|
|
|
|
fsCapwapWtpRebootStatisticsEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapWtpRebootStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that contain WTP Reboot Statistics Table ."
|
|
INDEX { capwapBaseWtpProfileId }
|
|
::= { fsCapwapWtpRebootStatisticsTable 1 }
|
|
|
|
FsCapwapWtpRebootStatisticsEntry ::= SEQUENCE
|
|
{
|
|
fsCapwapWtpRebootStatisticsRebootCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsAcInitiatedCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsLinkFailureCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsSwFailureCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsHwFailureCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsOtherFailureCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsUnknownFailureCount Unsigned32,
|
|
fsCapwapWtpRebootStatisticsLastFailureType INTEGER,
|
|
fsCapwapWtpRebootStatisticsRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapWtpRebootStatisticsRebootCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the WTP reboot count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 1 }
|
|
|
|
fsCapwapWtpRebootStatisticsAcInitiatedCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the AC Initiate count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 2 }
|
|
|
|
fsCapwapWtpRebootStatisticsLinkFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the link failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 3 }
|
|
|
|
fsCapwapWtpRebootStatisticsSwFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the SW failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 4 }
|
|
|
|
fsCapwapWtpRebootStatisticsHwFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the HW failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 5 }
|
|
|
|
fsCapwapWtpRebootStatisticsOtherFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the other failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 6 }
|
|
|
|
fsCapwapWtpRebootStatisticsUnknownFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unknown failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 7 }
|
|
|
|
fsCapwapWtpRebootStatisticsLastFailureType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(0),
|
|
aCInitiated(1),
|
|
linkFailure(2),
|
|
softwareFailure(3),
|
|
hardwareFailure(4),
|
|
otherFailure(5),
|
|
unknownFailure(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unknown failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRebootStatisticsEntry 8 }
|
|
|
|
fsCapwapWtpRebootStatisticsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The fsCapwapStationWhiteListRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row
|
|
have been assigned valid values."
|
|
::= { fsCapwapWtpRebootStatisticsEntry 9 }
|
|
|
|
-- End of fsCapwapWtpRebootStatistics Table
|
|
|
|
-- **********************************************************************
|
|
-- fsCapwapWtpRadioStatistics Table
|
|
-- **********************************************************************
|
|
fsCapwapWtpRadioStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsCapwapWtpRadioStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that contain the WTP Radio statistics;"
|
|
::={ fsCapwapConfig 15 }
|
|
|
|
fsCapwapWtpRadioStatisticsEntry OBJECT-TYPE
|
|
SYNTAX FsCapwapWtpRadioStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that contain WTP Radio Statistics Table ."
|
|
INDEX { ifIndex }
|
|
::= { fsCapwapWtpRadioStatisticsTable 1 }
|
|
|
|
FsCapwapWtpRadioStatisticsEntry ::= SEQUENCE
|
|
{
|
|
fsCapwapWtpRadioLastFailType INTEGER,
|
|
fsCapwapWtpRadioResetCount Unsigned32,
|
|
fsCapwapWtpRadioSwFailureCount Unsigned32,
|
|
fsCapwapWtpRadioHwFailureCount Unsigned32,
|
|
fsCapwapWtpRadioOtherFailureCount Unsigned32,
|
|
fsCapwapWtpRadioUnknownFailureCount Unsigned32,
|
|
fsCapwapWtpRadioConfigUpdateCount Unsigned32,
|
|
fsCapwapWtpRadioChannelChangeCount Unsigned32,
|
|
fsCapwapWtpRadioBandChangeCount Unsigned32,
|
|
fsCapwapWtpRadioCurrentNoiseFloor Integer32,
|
|
fsCapwapWtpRadioStatRowStatus RowStatus
|
|
}
|
|
|
|
fsCapwapWtpRadioLastFailType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
statsNotSupported(0),
|
|
softwareFailure(1),
|
|
hardwareFailure(2),
|
|
otherFailure(3),
|
|
unknownFailure(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the last WTP failure count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 1 }
|
|
|
|
fsCapwapWtpRadioResetCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Radio reset count."
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 2 }
|
|
|
|
fsCapwapWtpRadioSwFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of timer the radio has failed due to
|
|
software related reason"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 3 }
|
|
|
|
fsCapwapWtpRadioHwFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of timer the radio has failed due to
|
|
hardware related reason"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 4 }
|
|
|
|
fsCapwapWtpRadioOtherFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of timer the radio has failed due to
|
|
known reason other than software or hardware failure"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 5 }
|
|
|
|
fsCapwapWtpRadioUnknownFailureCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of timer the radio has failed due to
|
|
unknown reason"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 6 }
|
|
|
|
fsCapwapWtpRadioConfigUpdateCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of times the radio configuration has
|
|
been updated"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 7 }
|
|
|
|
fsCapwapWtpRadioChannelChangeCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of times the radio channel has been
|
|
changed"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 8 }
|
|
|
|
fsCapwapWtpRadioBandChangeCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of times the radio has changed the
|
|
frequency bands"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 9 }
|
|
|
|
fsCapwapWtpRadioCurrentNoiseFloor OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of times the radio has changed the
|
|
frequency bands"
|
|
DEFVAL { 0 }
|
|
::= { fsCapwapWtpRadioStatisticsEntry 10 }
|
|
|
|
fsCapwapWtpRadioStatRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create or delete a row
|
|
in this table. This table can be made active at the time of creation.
|
|
User will not be allowed to change the configurations."
|
|
::= { fsCapwapWtpRadioStatisticsEntry 11 }
|
|
|
|
-- End of fsCapwapWtpRadioStatistics Table
|
|
|
|
END
|