1731 lines
62 KiB
Plaintext
1731 lines
62 KiB
Plaintext
-- ****************************************************************************
|
|
--
|
|
-- IO Drive Information
|
|
-- Management Information Base for SNMP Network Management
|
|
--
|
|
--
|
|
-- Copyright 1996,2008 Hewlett-Packard Development Company, L.P.
|
|
--
|
|
-- Hewlett-Packard Company shall not be liable for technical or
|
|
-- editorial errors or omissions contained herein. The information in
|
|
-- this document is provided "as is" without warranty of any kind and
|
|
-- is subject to change without notice. The warranties for HP products
|
|
-- are set forth in the express limited warranty statements
|
|
-- accompanying such products. Nothing herein should be construed as
|
|
-- constituting an additional warranty.
|
|
--
|
|
-- Confidential computer software. Valid license from HP required for
|
|
-- possession, use or copying. Consistent with FAR 12.211 and 12.212,
|
|
-- Commercial Computer Software, Computer Software Documentation, and
|
|
-- Technical Data for Commercial Items are licensed to the U.S.
|
|
-- Government under vendor's standard commercial license.
|
|
--
|
|
-- Refer to the READMIB.RDM file for more information about the
|
|
-- organization of the information in the Compaq Enterprise.
|
|
--
|
|
-- The Compaq Enterprise number is 232.
|
|
-- The ASN.1 prefix to, and including the Compaq Enterprise is:
|
|
-- 1.3.6.1.4.1.232
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
CPQIODRV-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
compaq
|
|
FROM CPQHOST-MIB
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
sysName
|
|
FROM RFC1213-MIB
|
|
cpqHoTrapFlags
|
|
FROM CPQHOST-MIB
|
|
Counter
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
TRAP-TYPE
|
|
FROM RFC-1215;
|
|
|
|
|
|
-- For informaion on cpqHoTrapFlags please see CPQHOST MIB file
|
|
-- compaq OBJECT IDENTIFIER ::= { enterprises 232 }
|
|
|
|
cpqIoDrv OBJECT IDENTIFIER
|
|
::= { compaq 172 }
|
|
|
|
cpqIoDrvMibRev OBJECT IDENTIFIER
|
|
::= { cpqIoDrv 1 }
|
|
|
|
cpqIoDrvComponent OBJECT IDENTIFIER
|
|
::= { cpqIoDrv 2 }
|
|
|
|
cpqIoDrvInfo OBJECT IDENTIFIER
|
|
::= { cpqIoDrvComponent 1 }
|
|
|
|
cpqIoDrvExtn OBJECT IDENTIFIER
|
|
::= { cpqIoDrvComponent 2 }
|
|
|
|
cpqIoDrvCapacity OBJECT IDENTIFIER
|
|
::= { cpqIoDrvComponent 3 }
|
|
|
|
cpqIoDrvWrite OBJECT IDENTIFIER
|
|
::= { cpqIoDrvComponent 4 }
|
|
|
|
cpqIoDrvTemp OBJECT IDENTIFIER
|
|
::= { cpqIoDrvComponent 5 }
|
|
|
|
cpqIoDrvProc OBJECT IDENTIFIER
|
|
::= { cpqIoDrvComponent 6 }
|
|
|
|
-- ****************************************************************************
|
|
-- HP IO Drive Information MIB Revision
|
|
-- =============================================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvMibRev Group (1.3.6.1.4.1.232.172.1)
|
|
--
|
|
-- Implementation of the cpqIoDrvMibRev group is mandatory for all agents
|
|
-- supporting the Compaq IO Drive MIB.
|
|
--
|
|
-- An Insight Agent conforming to this document will return a
|
|
-- cpqIoDrvMibRevMajor of one (1) and a cpqIoDrvMibRevMinor of seven (7).
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvMibRevMajor OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Major MIB revision. This will increment when
|
|
incompatible structural changes occur."
|
|
::= { cpqIoDrvMibRev 1 }
|
|
|
|
cpqIoDrvMibRevMinor OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minor MIB revision. This will increment when minor
|
|
additions occur."
|
|
::= { cpqIoDrvMibRev 2 }
|
|
|
|
cpqIoDrvMibCondition OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
ok(2),
|
|
degraded(3),
|
|
failed(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The overall condition (status) of the system represented by
|
|
this MIB."
|
|
::= { cpqIoDrvMibRev 3 }
|
|
|
|
-- need to define the conditions based on other component
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Information Group
|
|
-- ==============================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvComponent Group (1.3.6.1.4.1.232.172.2)
|
|
-- cpqIoDrvInfo Group (1.3.6.1.4.1.232.172.2.1)
|
|
-- cpqIoDrvInfoTable (1.3.6.1.4.1.232.172.2.1.1)
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpqIoDrvInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"There will be an entry in this table for each IO Drive installed."
|
|
::= { cpqIoDrvInfo 1 }
|
|
|
|
cpqIoDrvInfoEntry OBJECT-TYPE
|
|
SYNTAX CpqIoDrvInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry represents an IO Drive device in system."
|
|
INDEX {
|
|
cpqIoDrvInfoIndex }
|
|
::= { cpqIoDrvInfoTable 1 }
|
|
|
|
CpqIoDrvInfoEntry ::= SEQUENCE {
|
|
cpqIoDrvInfoIndex INTEGER,
|
|
cpqIoDrvInfoStatus INTEGER,
|
|
cpqIoDrvInfoName DisplayString,
|
|
cpqIoDrvInfoSerialNumber DisplayString,
|
|
cpqIoDrvInfoPartNumber DisplayString,
|
|
cpqIoDrvInfoSubVendorPartNumber DisplayString,
|
|
cpqIoDrvInfoSparesPartNumber DisplayString,
|
|
cpqIoDrvInfoAssemblyNumber DisplayString,
|
|
cpqIoDrvInfoFirmwareVersion DisplayString,
|
|
cpqIoDrvInfoDriverVersion DisplayString,
|
|
cpqIoDrvInfoUID DisplayString,
|
|
cpqIoDrvInfoState INTEGER,
|
|
cpqIoDrvInfoClientDeviceName DisplayString,
|
|
cpqIoDrvInfoBeacon INTEGER,
|
|
cpqIoDrvInfoPCIAddress DisplayString,
|
|
cpqIoDrvInfoPCIDeviceID DisplayString,
|
|
cpqIoDrvInfoPCISubdeviceID DisplayString,
|
|
cpqIoDrvInfoPCIVendorID DisplayString,
|
|
cpqIoDrvInfoPCISubvendorID DisplayString,
|
|
cpqIoDrvInfoPCISlot INTEGER,
|
|
cpqIoDrvInfoWearoutIndicator INTEGER,
|
|
cpqIoDrvInfoFlashbackIndicator INTEGER,
|
|
cpqIoDrvInfoNonWritableIndicator INTEGER,
|
|
cpqIoDrvInfoCurrentTemp INTEGER,
|
|
cpqIoDrvInfoPercentLifeRemaining INTEGER,
|
|
cpqIoDrvInfoShortTermWearoutDate DisplayString,
|
|
cpqIoDrvInfoLongTermWearoutDate DisplayString,
|
|
cpqIoDrvInfoShortTermNonWritableDate DisplayString,
|
|
cpqIoDrvInfoLongTermNonWritableDate DisplayString,
|
|
cpqIoDrvInfoMinimalModeReason INTEGER,
|
|
cpqIoDrvInfoReducedWriteReason INTEGER,
|
|
cpqIoDrvInfoMilliVolts INTEGER,
|
|
cpqIoDrvInfoMilliVoltsPeak INTEGER,
|
|
cpqIoDrvInfoMilliVoltsMin INTEGER,
|
|
cpqIoDrvInfoMilliWatts INTEGER,
|
|
cpqIoDrvInfoMilliWattsPeak INTEGER,
|
|
cpqIoDrvInfoMilliAmps INTEGER,
|
|
cpqIoDrvInfoMilliAmpsPeak INTEGER,
|
|
cpqIoDrvInfoAdapterType INTEGER,
|
|
cpqIoDrvInfoAdapterPort INTEGER,
|
|
cpqIoDrvInfoAdapterSerialNumber DisplayString,
|
|
cpqIoDrvInfoAdapterExtPowerPresent INTEGER,
|
|
cpqIoDrvInfoPowerlossProtectDisabled INTEGER,
|
|
cpqIoDrvInfoInternalTempHigh INTEGER,
|
|
cpqIoDrvInfoAmbientTemp INTEGER,
|
|
cpqIoDrvInfoPCIBandwidthCompatibility INTEGER,
|
|
cpqIoDrvInfoPCIPowerCompatibility INTEGER,
|
|
cpqIoDrvInfoActualGoverningLevel INTEGER,
|
|
cpqIoDrvInfoLifespanGoverningLevel INTEGER,
|
|
cpqIoDrvInfoPowerGoverningLevel INTEGER,
|
|
cpqIoDrvInfoThermalGoverningLevel INTEGER,
|
|
cpqIoDrvInfoLifespanGoverningEnabled INTEGER,
|
|
cpqIoDrvInfoLifespanGoverningTgtDate DisplayString }
|
|
|
|
cpqIoDrvInfoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique number index for each IO Drive entries."
|
|
::= { cpqIoDrvInfoEntry 1 }
|
|
|
|
cpqIoDrvInfoStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
ok(2),
|
|
degraded(3),
|
|
failed(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The overall status of the unique IO Drive device."
|
|
::= { cpqIoDrvInfoEntry 2 }
|
|
|
|
cpqIoDrvInfoName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"System control device name for this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 3 }
|
|
|
|
|
|
cpqIoDrvInfoSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IO Drive serial number."
|
|
::= { cpqIoDrvInfoEntry 4 }
|
|
|
|
cpqIoDrvInfoPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IO Drive part number."
|
|
::= { cpqIoDrvInfoEntry 5 }
|
|
|
|
cpqIoDrvInfoSubVendorPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sub-vendor system part number of this device."
|
|
::= { cpqIoDrvInfoEntry 6 }
|
|
|
|
|
|
cpqIoDrvInfoSparesPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The spares part number of this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 7 }
|
|
|
|
cpqIoDrvInfoAssemblyNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The assembly number of this IO Drive (HW revision)."
|
|
::= { cpqIoDrvInfoEntry 8 }
|
|
|
|
cpqIoDrvInfoFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IO Drive firmware version."
|
|
::= { cpqIoDrvInfoEntry 9 }
|
|
|
|
|
|
cpqIoDrvInfoDriverVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Device driver version of this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 10 }
|
|
|
|
|
|
cpqIoDrvInfoUID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IO Drive UID written at format time."
|
|
::= { cpqIoDrvInfoEntry 11 }
|
|
|
|
cpqIoDrvInfoState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
detached(1),
|
|
attached(2),
|
|
minimal(3),
|
|
error(4),
|
|
detaching(5),
|
|
attaching(6),
|
|
scanning(7),
|
|
formatting(8),
|
|
updating(9),
|
|
attach(10),
|
|
detach(11),
|
|
format(12),
|
|
update(13) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current state of the attached client device.
|
|
In order to function normally, the device must be
|
|
in the 'attached' state.
|
|
|
|
Quiescent states:
|
|
|
|
attached = device is ready for normal use
|
|
detached = device is stopped
|
|
minimal = driver loaded but firmware needs updating
|
|
error = device is not working properly
|
|
|
|
Transitional states:
|
|
|
|
attaching = device is initializing
|
|
scanning = part of device initialization
|
|
detaching = device is stopping
|
|
formatting = the format operation is in process
|
|
updating = the firmware is being updated
|
|
|
|
Operations:
|
|
|
|
attach = make device operational
|
|
detach = take device off-line
|
|
format = re-formats device
|
|
update = firmware update
|
|
|
|
Device state must be minimal or detached to update the
|
|
firmware and must be detached in order format."
|
|
::= { cpqIoDrvInfoEntry 12 }
|
|
|
|
cpqIoDrvInfoClientDeviceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of the attached client device."
|
|
::= { cpqIoDrvInfoEntry 13 }
|
|
|
|
|
|
cpqIoDrvInfoBeacon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Writing a true value here will turn on the LED
|
|
flashing beacon for visual card identification. A
|
|
false value will turn the LED beacon off."
|
|
::= { cpqIoDrvInfoEntry 14 }
|
|
|
|
cpqIoDrvInfoPCIAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IO Drive address on the PCI bus."
|
|
::= { cpqIoDrvInfoEntry 15 }
|
|
|
|
cpqIoDrvInfoPCIDeviceID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IO Drive PCI ID."
|
|
::= { cpqIoDrvInfoEntry 16 }
|
|
|
|
|
|
cpqIoDrvInfoPCISubdeviceID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PCI subdevice ID of this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 17 }
|
|
|
|
cpqIoDrvInfoPCIVendorID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subvendor ID of this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 18 }
|
|
|
|
cpqIoDrvInfoPCISubvendorID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subvendor ID of this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 19 }
|
|
|
|
cpqIoDrvInfoPCISlot OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PCI slot number of this IO Drive."
|
|
::= { cpqIoDrvInfoEntry 20 }
|
|
|
|
cpqIoDrvInfoWearoutIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A true condition indicates that the device has
|
|
surpassed the wearout threshold."
|
|
::= { cpqIoDrvInfoEntry 21 }
|
|
|
|
cpqIoDrvInfoFlashbackIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A true condition indicates that flashback redundancy
|
|
is degraded."
|
|
::= { cpqIoDrvInfoEntry 22 }
|
|
|
|
cpqIoDrvInfoNonWritableIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
writeReduced(0),
|
|
nonWritable(1),
|
|
normal(2),
|
|
unknown(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value that indicates the writability of the device. This has been expanded to add the
|
|
writeReduced value."
|
|
::= { cpqIoDrvInfoEntry 23 }
|
|
|
|
cpqIoDrvInfoCurrentTemp OBJECT-TYPE
|
|
SYNTAX INTEGER (-100..100)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current internal temperature of the device in Celsius."
|
|
::= { cpqIoDrvInfoEntry 24 }
|
|
|
|
cpqIoDrvInfoPercentLifeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..100)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An estimate of the health of the drive expressed
|
|
as the remaining percentage of drive life before write rate
|
|
is reduced due to wearout. If health percentage is not available
|
|
the value will be set to -1."
|
|
::= { cpqIoDrvInfoEntry 25 }
|
|
|
|
cpqIoDrvInfoShortTermWearoutDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The date that the drive is estimated to reach the
|
|
wearout threshold based on drive usage in the short-term
|
|
interval."
|
|
::= { cpqIoDrvInfoEntry 26 }
|
|
|
|
cpqIoDrvInfoLongTermWearoutDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The date that the drive is estimated to reach the
|
|
wearout threshold based on drive usage in the long-term
|
|
interval."
|
|
::= { cpqIoDrvInfoEntry 27 }
|
|
|
|
cpqIoDrvInfoShortTermNonWritableDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The date that the drive is estimated to go non-writable
|
|
based on drive usage in the short-term interval."
|
|
::= { cpqIoDrvInfoEntry 28 }
|
|
|
|
cpqIoDrvInfoLongTermNonWritableDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The date that the drive is estimated to go non-writable
|
|
based on drive usage in the long-term interval."
|
|
::= { cpqIoDrvInfoEntry 29 }
|
|
|
|
cpqIoDrvInfoMinimalModeReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
fwOutOfDate(1),
|
|
lowPower(2),
|
|
dualPlaneFail(3),
|
|
internal(5),
|
|
cardLimitExceeded(6),
|
|
notInMinimalMode(7),
|
|
unsupportedOS(8) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reason card is in minimal mode."
|
|
::= { cpqIoDrvInfoEntry 30 }
|
|
|
|
cpqIoDrvInfoReducedWriteReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
userRequested(1),
|
|
noMdBlocks(2),
|
|
noMemory(3),
|
|
dieFailure(4),
|
|
wearout(5),
|
|
adapterPower(6),
|
|
internal(7),
|
|
powerLimiting(8),
|
|
unavailable(9),
|
|
groomFails(10) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reason card is in reduced write mode."
|
|
::= { cpqIoDrvInfoEntry 31 }
|
|
|
|
cpqIoDrvInfoMilliVolts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current voltage level of PCIe 12 volt bus in millivolts.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 32 }
|
|
|
|
cpqIoDrvInfoMilliVoltsPeak OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Peak voltage level of PCIe 12 volt bus in millivolts.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 33 }
|
|
|
|
cpqIoDrvInfoMilliVoltsMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum voltage level of PCIe 12 volt bus in millivolts.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 34 }
|
|
|
|
cpqIoDrvInfoMilliWatts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current wattage drawn on the PCIe 12 volt bus in milliwatts.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 35 }
|
|
|
|
cpqIoDrvInfoMilliWattsPeak OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Peak wattage drawn on the PCIe 12 volt bus in milliwatts.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 36 }
|
|
|
|
cpqIoDrvInfoMilliAmps OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Amperage flowing on the PCIe 12 volt bus in milliamps.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 37 }
|
|
|
|
cpqIoDrvInfoMilliAmpsPeak OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Peak amperage flowing on the PCIe 12 volt bus in milliamps.
|
|
A value of 0 means value could not be determined."
|
|
::= { cpqIoDrvInfoEntry 38 }
|
|
|
|
cpqIoDrvInfoAdapterType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
iodrive(0),
|
|
iodriveLowPro2(1),
|
|
iodriveDuo(2),
|
|
iosan(3),
|
|
unknown(4),
|
|
ioOctal(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of ioDimm adapter."
|
|
::= { cpqIoDrvInfoEntry 39 }
|
|
|
|
|
|
cpqIoDrvInfoAdapterPort OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port number of this ioDimm on the adapter. If port number
|
|
is not available the value will be set to -1."
|
|
::= { cpqIoDrvInfoEntry 40 }
|
|
|
|
cpqIoDrvInfoAdapterSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial number of the adapter where this ioDimm is connected."
|
|
::= { cpqIoDrvInfoEntry 41 }
|
|
|
|
cpqIoDrvInfoAdapterExtPowerPresent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A true condition indicates that external power is connected
|
|
on the adapter where this ioDimm is connected."
|
|
::= { cpqIoDrvInfoEntry 42 }
|
|
|
|
cpqIoDrvInfoPowerlossProtectDisabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A true condition indicates that powerloss protection is
|
|
available but disabled."
|
|
::= { cpqIoDrvInfoEntry 43 }
|
|
|
|
cpqIoDrvInfoInternalTempHigh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A true condition indicates that the internal temperature is
|
|
nearing the maximum rating."
|
|
::= { cpqIoDrvInfoEntry 44 }
|
|
|
|
cpqIoDrvInfoAmbientTemp OBJECT-TYPE
|
|
SYNTAX INTEGER (-100..100)
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The current ambient temperature of the device in Celsius."
|
|
::= { cpqIoDrvInfoEntry 45 }
|
|
|
|
cpqIoDrvInfoPCIBandwidthCompatibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
incompatible(0),
|
|
suboptimal(16),
|
|
optimal(2048),
|
|
unknown(32768) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bandwidth compatibility of the PCI-E slot. If the value is not optimal,
|
|
the status and condition variables will be set accordingly."
|
|
::= { cpqIoDrvInfoEntry 46 }
|
|
|
|
cpqIoDrvInfoPCIPowerCompatibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
incompatible(0),
|
|
suboptimal(16),
|
|
optimal(2048),
|
|
unknown(32768) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The power compatibility of the PCI-E slot. If the value is not optimal,
|
|
the status and condition variables will be set accordingly."
|
|
::= { cpqIoDrvInfoEntry 47 }
|
|
|
|
cpqIoDrvInfoActualGoverningLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
light(1),
|
|
moderate(2),
|
|
heavy(3),
|
|
unavailable(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The level of governing currently happening on the device. This may be
|
|
due to any of several reasons. Current reasons are because of high
|
|
temperature, power shortage, or to prolong life of the drive.
|
|
|
|
none = no governing active
|
|
light = light governing
|
|
moderate = moderate governing
|
|
heavy = heavy governing
|
|
unavailable = governing level unavailable"
|
|
::= { cpqIoDrvInfoEntry 48 }
|
|
|
|
cpqIoDrvInfoLifespanGoverningLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
light(1),
|
|
moderate(2),
|
|
heavy(3),
|
|
unavailable(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Governing may be impacted for the sake of prolonging longevity of the
|
|
device. This value indicates the level of contribution for longevity.
|
|
|
|
none = no governing active
|
|
light = light governing
|
|
moderate = moderate governing
|
|
heavy = heavy governing
|
|
unavailable = governing level unavailable"
|
|
::= { cpqIoDrvInfoEntry 49 }
|
|
|
|
cpqIoDrvInfoPowerGoverningLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
light(1),
|
|
moderate(2),
|
|
heavy(3),
|
|
unavailable(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Governing may be impacted due to a lack of power available to the
|
|
device. This value indicates the level of contribution due to
|
|
lack of power.
|
|
|
|
none = no governing active
|
|
light = light governing
|
|
moderate = moderate governing
|
|
heavy = heavy governing
|
|
unavailable = governing level unavailable"
|
|
::= { cpqIoDrvInfoEntry 50 }
|
|
|
|
cpqIoDrvInfoThermalGoverningLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
light(1),
|
|
moderate(2),
|
|
heavy(3),
|
|
unavailable(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Governing may be impacted due to the device reaching high
|
|
temperatures. This value indicates the level of contribution due to
|
|
high temperatures.
|
|
|
|
none = no governing active
|
|
light = light governing
|
|
moderate = moderate governing
|
|
heavy = heavy governing
|
|
unavailable = governing level unavailable"
|
|
::= { cpqIoDrvInfoEntry 51 }
|
|
|
|
cpqIoDrvInfoLifespanGoverningEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A true condition indicates that lifespan governing is enabled."
|
|
::= { cpqIoDrvInfoEntry 52 }
|
|
|
|
cpqIoDrvInfoLifespanGoverningTgtDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The target lifespan governing date."
|
|
::= { cpqIoDrvInfoEntry 53 }
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Information Group
|
|
-- ==============================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvComponent Group (1.3.6.1.4.1.232.172.2)
|
|
-- cpqIoDrvExtn Group (1.3.6.1.4.1.232.172.2.2)
|
|
-- cpqIoDrvExtnTable (1.3.6.1.4.1.232.172.2.2.1)
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpqIoDrvExtnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is extension of IO Drive information."
|
|
::= { cpqIoDrvExtn 1 }
|
|
|
|
cpqIoDrvExtnEntry OBJECT-TYPE
|
|
SYNTAX CpqIoDrvExtnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Addiotnal Informaiton about IO Drive will be populated in this
|
|
table."
|
|
INDEX {
|
|
cpqIoDrvExtnIndex }
|
|
::= { cpqIoDrvExtnTable 1 }
|
|
|
|
CpqIoDrvExtnEntry ::= SEQUENCE {
|
|
cpqIoDrvExtnIndex INTEGER,
|
|
cpqIoDrvExtnTotalPhysicalCapacityU Counter,
|
|
cpqIoDrvExtnTotalPhysicalCapacityL Counter,
|
|
cpqIoDrvExtnUsablePhysicalCapacityU Counter,
|
|
cpqIoDrvExtnUsablePhysicalCapacityL Counter,
|
|
cpqIoDrvExtnUsedPhysicalCapacityU Counter,
|
|
cpqIoDrvExtnUsedPhysicalCapacityL Counter,
|
|
cpqIoDrvExtnTotalLogicalCapacityU Counter,
|
|
cpqIoDrvExtnTotalLogicalCapacityL Counter,
|
|
cpqIoDrvExtnAvailableLogicalCapacityU Counter,
|
|
cpqIoDrvExtnAvailableLogicalCapacityL Counter,
|
|
cpqIoDrvExtnBytesReadU Counter,
|
|
cpqIoDrvExtnBytesReadL Counter,
|
|
cpqIoDrvExtnPhysicalBytesWrittenU Counter,
|
|
cpqIoDrvExtnPhysicalBytesWrittenL Counter,
|
|
cpqIoDrvExtnLogicalBytesWrittenU Counter,
|
|
cpqIoDrvExtnLogicalBytesWrittenL Counter,
|
|
cpqIoDrvExtnShortTermStartDate DisplayString,
|
|
cpqIoDrvExtnShortTermWindow INTEGER,
|
|
cpqIoDrvExtnShortTermEndDate DisplayString,
|
|
cpqIoDrvExtnShortTermEndDateFloat INTEGER,
|
|
cpqIoDrvExtnLongTermStartDate DisplayString,
|
|
cpqIoDrvExtnLongTermWindow INTEGER,
|
|
cpqIoDrvExtnLongTermEndDate DisplayString,
|
|
cpqIoDrvExtnLongTermEndDateFloat INTEGER,
|
|
cpqIoDrvExtnWriteRateAutoCalc INTEGER,
|
|
cpqIoDrvExtnShortTermAvgU Counter,
|
|
cpqIoDrvExtnShortTermAvgL Counter,
|
|
cpqIoDrvExtnLongTermAvgU Counter,
|
|
cpqIoDrvExtnLongTermAvgL Counter,
|
|
cpqIoDrvExtnConfidenceInterval INTEGER,
|
|
cpqIoDrvExtnFormattedBlockSize INTEGER,
|
|
cpqIoDrvExtnCurrentRAMUsageU Counter,
|
|
cpqIoDrvExtnCurrentRAMUsageL Counter,
|
|
cpqIoDrvExtnPeakRAMUsageU Counter,
|
|
cpqIoDrvExtnPeakRAMUsageL Counter }
|
|
|
|
cpqIoDrvExtnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique number index for each IO Drive extension entries.
|
|
There will be one-one mapping between cpqIoDrvExtnIndex
|
|
and cpqIoDrvInfoIndex."
|
|
::= { cpqIoDrvExtnEntry 1 }
|
|
|
|
cpqIoDrvExtnTotalPhysicalCapacityU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the max format size in bytes."
|
|
::= { cpqIoDrvExtnEntry 2 }
|
|
|
|
cpqIoDrvExtnTotalPhysicalCapacityL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the max format size in bytes."
|
|
::= { cpqIoDrvExtnEntry 3 }
|
|
|
|
cpqIoDrvExtnUsablePhysicalCapacityU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The upper word of the usable physical capacity
|
|
in bytes. This is space that is holding valid data,
|
|
is erased and ready for writing or waiting to be
|
|
reclaimed via garbage collection."
|
|
::= { cpqIoDrvExtnEntry 4 }
|
|
|
|
cpqIoDrvExtnUsablePhysicalCapacityL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The lower word of the usable physical capacity
|
|
in bytes. This is space that is holding valid data,
|
|
is erased and ready for writing or waiting to be
|
|
reclaimed via garbage collection."
|
|
::= { cpqIoDrvExtnEntry 5 }
|
|
|
|
cpqIoDrvExtnUsedPhysicalCapacityU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The upper word used physical capacity in bytes.
|
|
This is the space holding valid, current data."
|
|
::= { cpqIoDrvExtnEntry 6 }
|
|
|
|
cpqIoDrvExtnUsedPhysicalCapacityL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The lower word used physical capacity in bytes.
|
|
This is the space holding valid, current data."
|
|
::= { cpqIoDrvExtnEntry 7 }
|
|
|
|
cpqIoDrvExtnTotalLogicalCapacityU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the total logical capacity in
|
|
bytes as formatted."
|
|
::= { cpqIoDrvExtnEntry 8 }
|
|
|
|
cpqIoDrvExtnTotalLogicalCapacityL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the total logical capacity in
|
|
bytes as formatted."
|
|
::= { cpqIoDrvExtnEntry 9 }
|
|
|
|
cpqIoDrvExtnAvailableLogicalCapacityU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The upper word of the available logical capacity
|
|
in bytes."
|
|
::= { cpqIoDrvExtnEntry 10 }
|
|
|
|
cpqIoDrvExtnAvailableLogicalCapacityL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The lower word of the available logical capacity
|
|
in bytes."
|
|
::= { cpqIoDrvExtnEntry 11 }
|
|
|
|
cpqIoDrvExtnBytesReadU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the total number of bytes read
|
|
since the device was formatted."
|
|
::= { cpqIoDrvExtnEntry 12 }
|
|
|
|
cpqIoDrvExtnBytesReadL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the total number of bytes read
|
|
since the device was formatted."
|
|
::= { cpqIoDrvExtnEntry 13 }
|
|
|
|
cpqIoDrvExtnPhysicalBytesWrittenU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the total bytes written."
|
|
::= { cpqIoDrvExtnEntry 14 }
|
|
|
|
cpqIoDrvExtnPhysicalBytesWrittenL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the total bytes written."
|
|
::= { cpqIoDrvExtnEntry 15 }
|
|
|
|
cpqIoDrvExtnLogicalBytesWrittenU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The upper word of the number of user data bytes
|
|
written."
|
|
::= { cpqIoDrvExtnEntry 16 }
|
|
|
|
cpqIoDrvExtnLogicalBytesWrittenL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The lower word of the number of user data bytes
|
|
written."
|
|
::= { cpqIoDrvExtnEntry 17 }
|
|
|
|
cpqIoDrvExtnShortTermStartDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The start date used to characterize short-term
|
|
drive usage."
|
|
::= { cpqIoDrvExtnEntry 18 }
|
|
|
|
cpqIoDrvExtnShortTermWindow OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100000)
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The number of hours in the short-term usage
|
|
characterization window. If this value is non-zero,
|
|
then the short-term start date will automatically
|
|
track with the short-term end date by the number of
|
|
hours specified."
|
|
::= { cpqIoDrvExtnEntry 19 }
|
|
|
|
cpqIoDrvExtnShortTermEndDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The end date used to characterize short-term
|
|
drive usage."
|
|
::= { cpqIoDrvExtnEntry 20 }
|
|
|
|
cpqIoDrvExtnShortTermEndDateFloat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set this variable true to automatically have the
|
|
short-term end date automatically updated to
|
|
the present date."
|
|
::= { cpqIoDrvExtnEntry 21 }
|
|
|
|
cpqIoDrvExtnLongTermStartDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The start date used to characterize long-term
|
|
drive usage."
|
|
::= { cpqIoDrvExtnEntry 22 }
|
|
|
|
cpqIoDrvExtnLongTermWindow OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100000)
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The number of hours in the long-term usage
|
|
characterization window. If this value is non-zero,
|
|
then the long-term start date will automatically
|
|
track with the long-term end date by the number of
|
|
hours specified."
|
|
::= { cpqIoDrvExtnEntry 23 }
|
|
|
|
cpqIoDrvExtnLongTermEndDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The end date used to characterize long-term
|
|
drive usage."
|
|
::= { cpqIoDrvExtnEntry 24 }
|
|
|
|
cpqIoDrvExtnLongTermEndDateFloat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set this variable true to automatically have the
|
|
long-term end date automatically updated to
|
|
the present date."
|
|
::= { cpqIoDrvExtnEntry 25 }
|
|
|
|
cpqIoDrvExtnWriteRateAutoCalc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set this true to automatically calculate the long-term
|
|
and short-term average write rate based on the start and
|
|
end dates selected. Otherwise, the average write rate must
|
|
be set manually."
|
|
::= { cpqIoDrvExtnEntry 26 }
|
|
|
|
cpqIoDrvExtnShortTermAvgU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The upper word of the short-term average write
|
|
rate used to characterize drive usage. This will be
|
|
automatically calculated based on short-term start and
|
|
end dates if the auto calc value is true."
|
|
::= { cpqIoDrvExtnEntry 27 }
|
|
|
|
cpqIoDrvExtnShortTermAvgL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The lower word of the short-term average write
|
|
rate used to characterize drive usage. This will be
|
|
automatically calculated based on short-term start and
|
|
end dates if the auto calc value is true."
|
|
::= { cpqIoDrvExtnEntry 28 }
|
|
|
|
cpqIoDrvExtnLongTermAvgU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The upper word of the long-term average write
|
|
rate used to characterize drive usage. This will be
|
|
automatically calculated based on long-term start and
|
|
end dates if the auto calc value is true."
|
|
::= { cpqIoDrvExtnEntry 29 }
|
|
|
|
cpqIoDrvExtnLongTermAvgL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The lower word of the long-term average write
|
|
rate used to characterize drive usage. This will be
|
|
automatically calculated based on long-term start and
|
|
end dates if the auto calc value is true."
|
|
::= { cpqIoDrvExtnEntry 30 }
|
|
|
|
cpqIoDrvExtnConfidenceInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This defines the confidence interval used to calculate
|
|
the wearout and non-writable dates. Expressed as a
|
|
percentage, this value reflects the confidence in the
|
|
short and long-term averages used to characterize drive
|
|
usage."
|
|
::= { cpqIoDrvExtnEntry 31 }
|
|
|
|
cpqIoDrvExtnFormattedBlockSize OBJECT-TYPE
|
|
SYNTAX INTEGER (512..4096)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The block size that this device is formatted to use."
|
|
::= { cpqIoDrvExtnEntry 32 }
|
|
|
|
cpqIoDrvExtnCurrentRAMUsageU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the current RAM usage in bytes for the drive."
|
|
::= { cpqIoDrvExtnEntry 33 }
|
|
|
|
cpqIoDrvExtnCurrentRAMUsageL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the current RAM usage in bytes for the drive."
|
|
::= { cpqIoDrvExtnEntry 34 }
|
|
|
|
cpqIoDrvExtnPeakRAMUsageU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the peak RAM usage in bytes for the drive."
|
|
::= { cpqIoDrvExtnEntry 35 }
|
|
|
|
cpqIoDrvExtnPeakRAMUsageL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the peak RAM usage in bytes for the drive."
|
|
::= { cpqIoDrvExtnEntry 36 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Information Group
|
|
-- ==============================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvComponent Group (1.3.6.1.4.1.232.172.2)
|
|
-- cpqIoDrvCapacity Group (1.3.6.1.4.1.232.172.2.3)
|
|
-- cpqIoDrvCapacityTable (1.3.6.1.4.1.232.172.2.3.1)
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvCapacityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpqIoDrvCapacityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table will describe the physical capacity of IO Drive."
|
|
::= { cpqIoDrvCapacity 1 }
|
|
|
|
cpqIoDrvCapacityEntry OBJECT-TYPE
|
|
SYNTAX CpqIoDrvCapacityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines an entry of the usable physical capacity table"
|
|
INDEX {
|
|
cpqIoDrvCapacityInfoIndex,
|
|
cpqIoDrvCapacityIndex }
|
|
::= { cpqIoDrvCapacityTable 1 }
|
|
|
|
CpqIoDrvCapacityEntry ::= SEQUENCE {
|
|
cpqIoDrvCapacityInfoIndex INTEGER,
|
|
cpqIoDrvCapacityIndex INTEGER,
|
|
cpqIoDrvCapacityValueU Counter,
|
|
cpqIoDrvCapacityValueL Counter,
|
|
cpqIoDrvCapacityTimestamp DisplayString }
|
|
|
|
cpqIoDrvCapacityInfoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ioDrive index. This correlates to the drive index
|
|
in the info table."
|
|
::= { cpqIoDrvCapacityEntry 1 }
|
|
|
|
cpqIoDrvCapacityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Unique index for the usable physical capacity
|
|
log."
|
|
::= { cpqIoDrvCapacityEntry 2 }
|
|
|
|
cpqIoDrvCapacityValueU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the physical usable capacity
|
|
at this point in time"
|
|
::= { cpqIoDrvCapacityEntry 3 }
|
|
|
|
cpqIoDrvCapacityValueL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the physical usable capacity
|
|
at this point in time"
|
|
::= { cpqIoDrvCapacityEntry 4 }
|
|
|
|
cpqIoDrvCapacityTimestamp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time stamp entry."
|
|
::= { cpqIoDrvCapacityEntry 5 }
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Information Group
|
|
-- ==============================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvComponent Group (1.3.6.1.4.1.232.172.2)
|
|
-- cpqIoDrvWrite Group (1.3.6.1.4.1.232.172.2.4)
|
|
-- cpqIoDrvWriteTable (1.3.6.1.4.1.232.172.2.4.1)
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvWriteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpqIoDrvWriteEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This table will keep the history of writes on the IO Drive"
|
|
::= { cpqIoDrvWrite 1 }
|
|
|
|
cpqIoDrvWriteEntry OBJECT-TYPE
|
|
SYNTAX CpqIoDrvWriteEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A log of write volume history."
|
|
INDEX {
|
|
cpqIoDrvWriteInfoIndex,
|
|
cpqIoDrvWriteIndex }
|
|
::= { cpqIoDrvWriteTable 1 }
|
|
|
|
CpqIoDrvWriteEntry ::= SEQUENCE {
|
|
cpqIoDrvWriteInfoIndex INTEGER,
|
|
cpqIoDrvWriteIndex INTEGER,
|
|
cpqIoDrvWriteValueU Counter,
|
|
cpqIoDrvWriteValueL Counter,
|
|
cpqIoDrvWriteTimestamp DisplayString }
|
|
|
|
cpqIoDrvWriteInfoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ioDrive index. This correlates with the index
|
|
in the info table."
|
|
::= { cpqIoDrvWriteEntry 1 }
|
|
|
|
cpqIoDrvWriteIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Unique index for this write volume entry."
|
|
::= { cpqIoDrvWriteEntry 2 }
|
|
|
|
cpqIoDrvWriteValueU OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The upper word of the total physical number of
|
|
bytes written at a given moment in time."
|
|
::= { cpqIoDrvWriteEntry 3 }
|
|
|
|
cpqIoDrvWriteValueL OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower word of the total physical number of
|
|
bytes written at a given moment in time."
|
|
::= { cpqIoDrvWriteEntry 4 }
|
|
|
|
cpqIoDrvWriteTimestamp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time stamp entryfor this value."
|
|
::= { cpqIoDrvWriteEntry 5 }
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Information Group
|
|
-- ==============================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvComponent Group (1.3.6.1.4.1.232.172.2)
|
|
-- cpqIoDrvTemp Group (1.3.6.1.4.1.232.172.2.5)
|
|
-- cpqIoDrvTempTable (1.3.6.1.4.1.232.172.2.5.1)
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvTempTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpqIoDrvTempEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"IO Drive temperature history table."
|
|
::= { cpqIoDrvTemp 1 }
|
|
|
|
cpqIoDrvTempEntry OBJECT-TYPE
|
|
SYNTAX CpqIoDrvTempEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Log of IO Drive temperature."
|
|
INDEX {
|
|
cpqIoDrvTempInfoIndex,
|
|
cpqIoDrvTempIndex }
|
|
::= { cpqIoDrvTempTable 1 }
|
|
|
|
CpqIoDrvTempEntry ::= SEQUENCE {
|
|
cpqIoDrvTempInfoIndex INTEGER,
|
|
cpqIoDrvTempIndex INTEGER,
|
|
cpqIoDrvTempValue INTEGER,
|
|
cpqIoDrvTempTimestamp Counter }
|
|
|
|
cpqIoDrvTempInfoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The device index. This correlates to the index in
|
|
the info table."
|
|
::= { cpqIoDrvTempEntry 1 }
|
|
|
|
cpqIoDrvTempIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Unique index for this temperature log entry."
|
|
::= { cpqIoDrvTempEntry 2 }
|
|
|
|
cpqIoDrvTempValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..50)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current temperature of the device in Celsius."
|
|
::= { cpqIoDrvTempEntry 3 }
|
|
|
|
cpqIoDrvTempTimestamp OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The timestamp for this entry."
|
|
::= { cpqIoDrvTempEntry 4 }
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Information Group
|
|
-- ==============================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
-- cpqIoDrv Group (1.3.6.1.4.1.232.172)
|
|
-- cpqIoDrvComponent Group (1.3.6.1.4.1.232.172.2)
|
|
-- cpqIoDrvProc Group (1.3.6.1.4.1.232.172.2.6)
|
|
-- cpqIoDrvProcTable (1.3.6.1.4.1.232.172.2.6.1)
|
|
--
|
|
-- Now deprecated. The RAM usage can be found in the cpqIoDrvExtnTable.
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvProcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CpqIoDrvProcEntry
|
|
ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A table of processes that support IO Drive operation."
|
|
::= { cpqIoDrvProc 1 }
|
|
|
|
cpqIoDrvProcEntry OBJECT-TYPE
|
|
SYNTAX CpqIoDrvProcEntry
|
|
ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Each entry represents a process in the table."
|
|
INDEX {
|
|
cpqIoDrvProcIndex }
|
|
::= { cpqIoDrvProcTable 1 }
|
|
|
|
CpqIoDrvProcEntry ::= SEQUENCE {
|
|
cpqIoDrvProcIndex INTEGER,
|
|
cpqIoDrvProcName DisplayString,
|
|
cpqIoDrvProcState DisplayString,
|
|
cpqIoDrvProcRAM Counter,
|
|
cpqIoDrvProcCPU INTEGER }
|
|
|
|
cpqIoDrvProcIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..500)
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A unique index for each process."
|
|
::= { cpqIoDrvProcEntry 1 }
|
|
|
|
cpqIoDrvProcName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The process name."
|
|
::= { cpqIoDrvProcEntry 2 }
|
|
|
|
cpqIoDrvProcState OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The process state."
|
|
::= { cpqIoDrvProcEntry 3 }
|
|
|
|
cpqIoDrvProcRAM OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The bytes of RAM currently in use by the process."
|
|
::= { cpqIoDrvProcEntry 4 }
|
|
|
|
cpqIoDrvProcCPU OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The overall percentage of CPU usage."
|
|
::= { cpqIoDrvProcEntry 5 }
|
|
|
|
-- ****************************************************************************
|
|
-- IO Drive Trap Definition
|
|
-- =====================================================
|
|
--
|
|
-- The compaq enterprise (1.3.6.1.4.1.232)
|
|
--
|
|
-- The SNMP trap messages must not be bigger than 484 octets (bytes).
|
|
--
|
|
-- Trap support in an SNMP agent implementation is optional. An SNMP
|
|
-- agent implementation may support all, some, or none of the traps.
|
|
-- If traps are supported, the user should be provided with the option of
|
|
-- disabling traps.
|
|
--
|
|
-- ****************************************************************************
|
|
|
|
cpqIoDrvWearoutTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoWearoutIndicator,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"IO Drive begins to wear out.
|
|
|
|
This trap signifies that the agent has detected a wear out of
|
|
IO Drive configured with your system."
|
|
|
|
--#TYPE "cpqIoDrvWearoutTrap (172001)"
|
|
--#SUMMARY "IO Drive begins to wear out"
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY MINOR
|
|
--#TIMEINDEX 99
|
|
--#STATE DEGRADED
|
|
|
|
::= 172001
|
|
|
|
cpqIoDrvNonWritableTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoNonWritableIndicator,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"IO Drive is not writeable due to excessive wear
|
|
|
|
This trap signifies that IO Drive configured with system is not
|
|
writeable due to excessive wear.
|
|
|
|
User Action: Replace the existing IO Drive to make it
|
|
writable."
|
|
|
|
--#TYPE "cpqIoDrvNonWritableTrap (172002)"
|
|
--#SUMMARY "IO Drive is not writeable due to excessive wear."
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY CRITICAL
|
|
--#TIMEINDEX 99
|
|
--#STATE DEGRADED
|
|
|
|
::= 172002
|
|
|
|
cpqIoDrvFlashbackTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoFlashbackIndicator,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"IO Drive flashback protection becomes degraded
|
|
|
|
This trap signifies that IO Drive flashback protection
|
|
configured with system is degraded."
|
|
|
|
--#TYPE "cpqIoDrvFlashbackTrap (172003)"
|
|
--#SUMMARY "IO Drive flashback protection becomes degraded"
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY MINOR
|
|
--#TIMEINDEX 99
|
|
--#STATE DEGRADED
|
|
|
|
::= 172003
|
|
|
|
cpqIoDrvTempHighTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoCurrentTemp,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"Temperature sensor of IO Drive surpasses the threshold.
|
|
|
|
This trap signifies that the temperature sensor of IO Drive
|
|
configured with system surpasses the threshold configured."
|
|
|
|
--#TYPE "cpqIoDrvFlashbackTrap (172004)"
|
|
--#SUMMARY "Temperature sensor of IO Drive surpasses the threshold"
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY MAJOR
|
|
--#TIMEINDEX 99
|
|
--#STATE DEGRADED
|
|
|
|
::= 172004
|
|
|
|
cpqIoDrvTempOkTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoCurrentTemp,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"Temperature sensor of IO Drive set below threshold.
|
|
|
|
This trap signifies that the temperature sensor of IO Drive
|
|
configured with system surpasses the threshold configured."
|
|
|
|
--#TYPE "cpqIoDrvFlashbackTrap (172005)"
|
|
--#SUMMARY "Temperature sensor of IO Drive set below threshold"
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
|
|
::= 172005
|
|
|
|
cpqIoDrvErrorTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoState,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"IO Drive is in an error state."
|
|
|
|
--#TYPE "cpqIoDrvErrorTrap (172006)"
|
|
--#SUMMARY "IO Drive is in an error state."
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY MAJOR
|
|
--#TIMEINDEX 99
|
|
--#STATE DEGRADED
|
|
|
|
::= 172006
|
|
|
|
cpqIoDrvPowerlossProtectTrap TRAP-TYPE
|
|
ENTERPRISE compaq
|
|
VARIABLES {
|
|
sysName,
|
|
cpqHoTrapFlags,
|
|
cpqIoDrvInfoPowerlossProtectDisabled,
|
|
cpqIoDrvInfoIndex,
|
|
cpqIoDrvInfoName,
|
|
cpqIoDrvInfoFirmwareVersion,
|
|
cpqIoDrvInfoSparesPartNumber,
|
|
cpqIoDrvInfoSerialNumber,
|
|
cpqIoDrvInfoPCISlot}
|
|
DESCRIPTION
|
|
"IO Drive powerloss protection is disabled."
|
|
|
|
--#TYPE "cpqIoDrvPowerlossProtectTrap (172007)"
|
|
--#SUMMARY "IO Drive powerloss protection is disabled."
|
|
--#ARGUMENTS {8}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
|
|
::= 172007
|
|
|
|
END
|