Observium_CE/mibs/fscom/FS-TRAFFIC-CTRL-MIB

249 lines
9.4 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- FS-TRAFFIC-CTRL-MIB.mib: FS traffic control MIB file
--
-- March 2002, Wuzg
--
-- Copyright (c) 2002 by FS.COM Inc..
-- All rights reserved.
--
-- *****************************************************************
--
FS-TRAFFIC-CTRL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION
FROM SNMPv2-TC
IfIndex
FROM FS-TC
ifIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
fsMgmt
FROM FS-SMI;
fsTrafficCtrlMIB MODULE-IDENTITY
LAST-UPDATED "200203200000Z"
ORGANIZATION "FS.COM Inc.."
CONTACT-INFO
"
Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html"
DESCRIPTION
"This module defines fs traffic control mibs."
REVISION "200203200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 14}
-- Percentage for statistic, etc.
--
Percent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of a percent value."
SYNTAX INTEGER (1..100)
fsTrafficCtrlMIBObjects OBJECT IDENTIFIER ::= { fsTrafficCtrlMIB 1 }
fsPtTrafficCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSPtTrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of port-based traffic control configuration objects."
::= { fsTrafficCtrlMIBObjects 1 }
fsPtTrafficCtrlEntry OBJECT-TYPE
SYNTAX FSPtTrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains port-based traffic control configuration objects."
INDEX { fsPtTrafficCtrlIfIndex }
::= { fsPtTrafficCtrlTable 1 }
FSPtTrafficCtrlEntry ::=
SEQUENCE {
fsPtTrafficCtrlIfIndex IfIndex,
fsPtProtectedPortStatus EnabledStatus,
fsPtBroadcastStormControlStatus EnabledStatus,
fsPtMulticastStormControlStatus EnabledStatus,
fsPtUnicastStormControlStatus EnabledStatus,
fsPtBroadcastStormControlLevel Percent,
fsPtMulticastStormControlLevel Percent,
fsPtUnicastStormControlLevel Percent
}
fsPtTrafficCtrlIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { fsPtTrafficCtrlEntry 1 }
fsPtProtectedPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Some applications require that no traffic be forwarded by the
Layer 2 protocol between ports on the same switch. In such an
environment, there is no exchange of unicast, broadcast,
or multicast traffic betweenports on the switch, and traffic
between ports on the same switch is forwarded through a Layer 3 device
such as a router.
To meet this requirement, you can configure ports as protected ports(Set this
value to enabled).Protected ports do not forward any traffic to protected ports on
the same switch. This means that all traffic passing between protected
ports<74><73>unicast, broadcast, and multicast<73><74>must be forwarded through a Layer 3 device.
Protected ports can forward any type of traffic to nonprotected ports,
and they forward as usual to all ports on other switches. Dynamically learnt
addresses are not retained if the switch is reloaded."
DEFVAL { disabled }
::= { fsPtTrafficCtrlEntry 2 }
fsPtBroadcastStormControlStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the broadcast storm control status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).
This attribute apply physical port and aggreate port"
::= { fsPtTrafficCtrlEntry 3 }
fsPtMulticastStormControlStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the multicast storm control status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).
This attribute apply physical port and aggreate port"
::= { fsPtTrafficCtrlEntry 4 }
fsPtUnicastStormControlStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the unknown unicast storm control status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).
This attribute apply physical port and aggreate port"
::= { fsPtTrafficCtrlEntry 5 }
fsPtBroadcastStormControlLevel OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of maximal traffic allowed to go through the broadcast packets in the interface bandwidth.
When the traffic of broadcast packets exceeds the percentage, the broadcast packets correspondent with
the exceeded traffic will be discarded.
It takes effect only when the broadcast storm control function is enabled on the interface."
DEFVAL { 10 }
::= { fsPtTrafficCtrlEntry 6 }
fsPtMulticastStormControlLevel OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of maximal traffic allowed to go through the multicast packets in the interface bandwidth.
When the traffic of multicast packets exceeds the percentage, the multicast packets correspondent with
the exceeded traffic will be discarded.
It takes effect only when the broadcast storm control function is enabled on the interface."
DEFVAL { 10 }
::= { fsPtTrafficCtrlEntry 7 }
fsPtUnicastStormControlLevel OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of maximal traffic allowed to go through the unknown unicast packets in the interface bandwidth.
When the traffic of unknown unicast packets exceeds the percentage, the unknown unicast packets correspondent with
the exceeded traffic will be discarded.
It takes effect only when the broadcast storm control function is enabled on the interface."
DEFVAL { 10 }
::= { fsPtTrafficCtrlEntry 8 }
fsPtTrafficCtrlTraps OBJECT IDENTIFIER ::= { fsTrafficCtrlMIB 2 }
stormViolationAlarmType OBJECT-TYPE
SYNTAX INTEGER{
unknown(1),
broadcast(2),
mutlicast(3),
unicast(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of storm of interface"
::= { fsPtTrafficCtrlTraps 1 }
stormViolationAlarm NOTIFICATION-TYPE
OBJECTS {ifIndex, stormViolationAlarmType}
STATUS current
DESCRIPTION
"while the storm threshold has been set, if more broadcast
is send to the port, then this trap will be sent."
::= { fsPtTrafficCtrlTraps 2 }
fsPtTrafficCtrlMIBConformance OBJECT IDENTIFIER ::= { fsTrafficCtrlMIB 3 }
fsPtTrafficCtrlMIBCompliances OBJECT IDENTIFIER ::= { fsPtTrafficCtrlMIBConformance 1 }
fsPtTrafficCtrlMIBGroups OBJECT IDENTIFIER ::= { fsPtTrafficCtrlMIBConformance 2 }
-- compliance statements
fsPtTrafficCtrlMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the FS IfConfig MIB"
MODULE -- this module
MANDATORY-GROUPS { fsPtTrafficCtrlMIBGroup
}
::= { fsPtTrafficCtrlMIBCompliances 1 }
-- units of conformance
fsPtTrafficCtrlMIBGroup OBJECT-GROUP
OBJECTS {
fsPtTrafficCtrlIfIndex,
fsPtProtectedPortStatus,
fsPtBroadcastStormControlStatus,
fsPtMulticastStormControlStatus,
fsPtUnicastStormControlStatus,
fsPtBroadcastStormControlLevel,
fsPtMulticastStormControlLevel,
fsPtUnicastStormControlLevel
}
STATUS current
DESCRIPTION
"A collection of objects providing port traffic control configure."
::= { fsPtTrafficCtrlMIBGroups 1 }
END