415 lines
12 KiB
Plaintext
415 lines
12 KiB
Plaintext
-- *****************************************************************
|
|
-- NMS-PROCESS-MIB.my: MIB for CPU and process statistics
|
|
--
|
|
-- October 2003
|
|
--
|
|
-- Copyright (c) 2003 by NMS, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
|
|
FS-NMS-PROCESS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Gauge32
|
|
FROM SNMPv2-SMI
|
|
TimeStamp,
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
nmsMgmt
|
|
FROM FS-NMS-SMI
|
|
-- Unsigned32, EntPhysicalIndexOrZero
|
|
-- FROM FS-NMS-TC;
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
EntPhysicalIndexOrZero
|
|
FROM FS-NMS-TC;
|
|
|
|
|
|
nmsProcessMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200311060000Z"
|
|
ORGANIZATION ""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"The MIB module to describe active system processes."
|
|
REVISION "200310160000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { nmsMgmt 109 }
|
|
|
|
-- This MIB displays memory and CPU utilization on nms devices. CPU
|
|
-- utilization will give a general idea of how busy the processor is.
|
|
-- The numbers are a ratio of the current idle time over the longest
|
|
-- idle time. Please note that this information should be used as an
|
|
-- estimate only.
|
|
|
|
nmsProcessMIBObjects OBJECT IDENTIFIER ::= { nmsProcessMIB 1 }
|
|
nmspmCPU OBJECT IDENTIFIER ::= { nmsProcessMIBObjects 1 }
|
|
nmspmProcess OBJECT IDENTIFIER ::= { nmsProcessMIBObjects 2 }
|
|
|
|
|
|
--NMS CPU Total Table
|
|
|
|
nmspmCPUTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NMSpmCPUTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of overall CPU statistics. "
|
|
::= { nmspmCPU 1 }
|
|
|
|
nmspmCPUTotalEntry OBJECT-TYPE
|
|
SYNTAX NMSpmCPUTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Overall information about the CPU load. Entries in this
|
|
table come and go as CPUs are added and removed from the
|
|
system."
|
|
INDEX { nmspmCPUTotalIndex }
|
|
::= { nmspmCPUTotalTable 1 }
|
|
|
|
NMSpmCPUTotalEntry ::=
|
|
SEQUENCE {
|
|
nmspmCPUTotalIndex Unsigned32,
|
|
nmspmCPUTotalPhysicalIndex EntPhysicalIndexOrZero,
|
|
nmspmCPUTotal5sec Gauge32,
|
|
nmspmCPUTotal1min Gauge32,
|
|
nmspmCPUTotal5min Gauge32
|
|
}
|
|
|
|
nmspmCPUTotalIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a CPU (or group of CPUs)
|
|
whose CPU load information is reported by a row in this table.
|
|
This index is assigned arbitrarily by the engine
|
|
and is not saved over reboots."
|
|
::= { nmspmCPUTotalEntry 1 }
|
|
|
|
nmspmCPUTotalPhysicalIndex OBJECT-TYPE
|
|
SYNTAX EntPhysicalIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entPhysicalIndex of the physical entity for which
|
|
the CPU statistics in this entry are maintained.
|
|
The physical entity can be a CPU chip, a group of CPUs,
|
|
a CPU card etc. The exact type of this entity is described by
|
|
its entPhysicalVendorType value. If the CPU statistics
|
|
in this entry correspond to more than one physical entity
|
|
(or to no physical entity), or if the entPhysicalTable is
|
|
not supported on the SNMP agent, the value of this object
|
|
must be zero."
|
|
::= { nmspmCPUTotalEntry 2 }
|
|
|
|
nmspmCPUTotal5sec OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The overall CPU busy percentage in the last 5 second
|
|
period. This object is deprecated by nmspmCPUTotal5secRev
|
|
which has the changed range of value (0..100)."
|
|
::= { nmspmCPUTotalEntry 3 }
|
|
|
|
nmspmCPUTotal1min OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The overall CPU busy percentage in the last 1 minute
|
|
period. This object is deprecated by nmspmCPUTotal1minRev
|
|
which has the changed range of value (0..100)."
|
|
::= { nmspmCPUTotalEntry 4 }
|
|
|
|
nmspmCPUTotal5min OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The overall CPU busy percentage in the last 5 minute
|
|
period. This object is deprecated by nmspmCPUTotal5minRev
|
|
which has the changed range of value (0..100)."
|
|
::= { nmspmCPUTotalEntry 5 }
|
|
|
|
nmspmCPUMaxUtilization OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max value of nmspmCPUTotal5sec."
|
|
::= { nmspmCPU 2 }
|
|
|
|
nmspmCPUClearMaxUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER{clear(1)}
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To clear nmspmCPUMaxUtilization."
|
|
::= { nmspmCPU 3 }
|
|
|
|
|
|
|
|
-- NMS Processes Common Table
|
|
|
|
nmspmProcessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NMSpmProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of generic information on all active
|
|
processes on this device."
|
|
::= { nmspmProcess 1 }
|
|
|
|
nmspmProcessEntry OBJECT-TYPE
|
|
SYNTAX NMSpmProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generic information about an active process on this
|
|
device. Entries in this table come and go as processes are
|
|
created and destroyed by the device."
|
|
INDEX { nmspmCPUTotalIndex, nmspmProcessPID }
|
|
::= { nmspmProcessTable 1 }
|
|
|
|
NMSpmProcessEntry ::=
|
|
SEQUENCE {
|
|
nmspmProcessPID
|
|
Unsigned32,
|
|
nmspmProcessName
|
|
DisplayString,
|
|
nmspmProcessPriority
|
|
INTEGER,
|
|
nmspmProcessTimeCreated
|
|
TimeStamp
|
|
}
|
|
|
|
nmspmProcessPID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the process ID. nmspmProcessTimeCreated
|
|
should be checked against the last time it was polled,
|
|
and if it has changed the PID has been reused and the
|
|
entire entry should be polled again. The process IDs
|
|
are discrete."
|
|
::= { nmspmProcessEntry 1 }
|
|
|
|
nmspmProcessName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name associated with this process. If the name is
|
|
longer than 32 characters, it will be truncated to the first
|
|
31 characters, and a `*' will be appended as the last
|
|
character to imply this is a truncated process name."
|
|
::= { nmspmProcessEntry 2 }
|
|
|
|
nmspmProcessPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(0),
|
|
veryhigh(55),
|
|
high(60),
|
|
normal(128),
|
|
low(180),
|
|
verylow(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority level at which the process is
|
|
running. This object is deprecated by
|
|
nmspmProcExtPriorityRev."
|
|
::= { nmspmProcessEntry 3 }
|
|
|
|
nmspmProcessTimeCreated OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the process was created. The process ID
|
|
and the time when the process was created, uniquely
|
|
identifies a process."
|
|
::= { nmspmProcessEntry 4 }
|
|
|
|
-- notifications
|
|
|
|
nmsProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { nmsProcessMIB 2 }
|
|
nmsProcessMIBNotifs OBJECT IDENTIFIER ::=
|
|
{ nmsProcessMIBNotifPrefix 0 }
|
|
|
|
-- (no notifications are currently defined)
|
|
|
|
|
|
-- conformance information
|
|
|
|
nmsProcessMIBConformance OBJECT IDENTIFIER ::= { nmsProcessMIB 3 }
|
|
nmspmCompliances OBJECT IDENTIFIER ::= { nmsProcessMIBConformance 1 }
|
|
nmspmGroups OBJECT IDENTIFIER ::= { nmsProcessMIBConformance 2 }
|
|
|
|
--nmsProcessMIBCompliance MODULE-COMPLIANCE
|
|
-- STATUS deprecated
|
|
-- DESCRIPTION
|
|
-- "The compliance statement for entities which implement
|
|
-- the NMS Process MIB. This is deprecated and new
|
|
-- compliance nmsProcessMIBComplianceRev is added."
|
|
-- MODULE
|
|
-- MANDATORY-GROUPS { nmspmCPUTotalGroup, nmspmProcessGroup }
|
|
--
|
|
--
|
|
-- GROUP nmspmProcessExtGroup
|
|
-- DESCRIPTION
|
|
-- "The nmspmProcessExtGroup is optional for all entities."
|
|
--
|
|
-- OBJECT nmspmProcExtPriority
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION "Write access is not required."
|
|
--
|
|
-- ::= { nmspmCompliances 1 }
|
|
|
|
--nmsProcessMIBComplianceRev MODULE-COMPLIANCE
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The compliance statement for entities which implement
|
|
-- the NMS Process MIB. This compliance module
|
|
-- deprecates nmsProcessMIBCompliance."
|
|
-- MODULE
|
|
-- MANDATORY-GROUPS { nmspmCPUTotalGroupRev, nmspmProcessGroupRev}
|
|
--
|
|
-- GROUP nmspmProcessExtGroupRev
|
|
-- DESCRIPTION
|
|
-- "The nmspmProcessExtGroupRev is optional for all
|
|
-- entities. This object is defined after deprecating
|
|
-- nmspmProcessExtGroup."
|
|
--
|
|
-- ::= { nmspmCompliances 2 }
|
|
|
|
-- units of conformance
|
|
|
|
--nmspmCPUTotalGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- nmspmCPUTotalPhysicalIndex,
|
|
-- nmspmCPUTotal5sec,
|
|
-- nmspmCPUTotal1min,
|
|
-- nmspmCPUTotal5min
|
|
-- }
|
|
-- STATUS deprecated
|
|
-- DESCRIPTION
|
|
-- "A collection of objects providing CPU load monitoring
|
|
-- information. This group is mandatory for all nms devices.
|
|
-- This group is deprecated since the objects nmspmCPUTotal5sec,
|
|
-- nmspmCPUTotal1min and nmspmCPUTotal5min are
|
|
-- deprecated. A new object nmspmCPUTotalGroupRev is
|
|
-- added in place of it."
|
|
-- ::= { nmspmGroups 1 }
|
|
|
|
--nmspmProcessGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- nmspmProcessPID,
|
|
-- nmspmProcessName,
|
|
-- nmspmProcessuSecs,
|
|
-- nmspmProcessTimeCreated
|
|
-- }
|
|
-- STATUS deprecated
|
|
-- DESCRIPTION
|
|
-- "A collection of objects providing common process
|
|
-- monitoring information. This group is mandatory for
|
|
-- all nms devices. This object is deprecated
|
|
-- by nmspmProcessGroupRev."
|
|
-- ::= { nmspmGroups 2 }
|
|
|
|
--nmspmProcessExtGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- nmspmProcExtMemAllocated,
|
|
-- nmspmProcExtMemFreed,
|
|
-- nmspmProcExtInvoked,
|
|
-- nmspmProcExtRuntime,
|
|
-- nmspmProcExtUtil5Sec,
|
|
-- nmspmProcExtUtil1Min,
|
|
-- nmspmProcExtUtil5Min,
|
|
-- nmspmProcExtPriority
|
|
-- }
|
|
-- STATUS deprecated
|
|
-- DESCRIPTION
|
|
-- "A collection of objects providing additional and
|
|
-- more detailed process monitoring information. This
|
|
-- group is mandatory for all nms devices that have
|
|
-- the internal capability to keep this information.
|
|
-- This group is deprecated and new group
|
|
-- nmspmProcessExtGroupRev is added."
|
|
-- ::= { nmspmGroups 3 }
|
|
|
|
--nmspmCPUTotalGroupRev OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- nmspmCPUTotalPhysicalIndex,
|
|
-- nmspmCPUTotal5secRev,
|
|
-- nmspmCPUTotal1minRev,
|
|
-- nmspmCPUTotal5minRev
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A collection of objects providing CPU load monitoring
|
|
-- information. This group is mandatory for all nms
|
|
-- devices. This group deprecates nmspmCPUTotalGroup."
|
|
-- ::= { nmspmGroups 4 }
|
|
|
|
--nmspmProcessExtGroupRev OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- nmspmProcExtMemAllocatedRev,
|
|
-- nmspmProcExtMemFreedRev,
|
|
-- nmspmProcExtInvokedRev,
|
|
-- nmspmProcExtRuntimeRev,
|
|
-- nmspmProcExtUtil5SecRev,
|
|
-- nmspmProcExtUtil1MinRev,
|
|
-- nmspmProcExtUtil5MinRev,
|
|
-- nmspmProcExtPriorityRev
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A collection of objects providing additional and
|
|
-- more detailed process monitoring information. This
|
|
-- group is mandatory for all nms devices that have
|
|
-- the internal capability to keep this information.
|
|
-- This group is formed after deprecating nmspmProcessExtGroup.
|
|
-- nmspmProcExtMemAllocatedRev, nmspmProcExtMemFreedRev,
|
|
-- nmspmProcExtInvokedRev, nmspmProcExtRuntimeRev,
|
|
-- nmspmProcExtUtil5SecRev, nmspmProcExtUtil1MinRev and
|
|
-- nmspmProcExtUtil5MinRev are the new objects added."
|
|
-- ::= { nmspmGroups 5 }
|
|
|
|
--nmspmProcessGroupRev OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- nmspmProcessPID,
|
|
-- nmspmProcessName,
|
|
-- nmspmProcessAverageUSecs,
|
|
-- nmspmProcessTimeCreated
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A collection of objects providing common process
|
|
-- monitoring information. This group is mandatory for
|
|
-- all nms devices. This object deprecates
|
|
-- nmspmProcessGroup."
|
|
-- ::= { nmspmGroups 6 }
|
|
|
|
END
|
|
|
|
|