1641 lines
56 KiB
Plaintext
1641 lines
56 KiB
Plaintext
ENTERASYS-IP-SLA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- enterasys-ip-sla-mib.txt
|
|
--
|
|
-- Part Number:
|
|
--
|
|
--
|
|
|
|
-- This module provides authoritative definitions for Enterasys
|
|
-- Networks' IP SLA functionality.
|
|
|
|
--
|
|
-- This module will be extended, as needed.
|
|
|
|
-- Enterasys Networks reserves the right to make changes in this
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Enterasys Networks
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Enterasys Networks be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Enterasys
|
|
-- Networks has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Enterasys Networks grants vendors, end-users, and other interested
|
|
-- parties a non-exclusive license to use this Specification in
|
|
-- connection with the management of Enterasys Networks products.
|
|
|
|
-- Copyright February, 2013 Enterasys Networks, Inc.
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InetAddressType, InetAddress, InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
etsysModules
|
|
FROM ENTERASYS-MIB-NAMES;
|
|
|
|
etsysIpSlaMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201302061826Z" -- Wed Feb 6 18:26 UTC 2013
|
|
ORGANIZATION "Enterasys Networks, Inc"
|
|
CONTACT-INFO
|
|
"Postal: Enterasys Networks
|
|
9 Northeastern Blvd.
|
|
Salem, NH 03079 USA
|
|
|
|
Phone: +1 603 952 5000
|
|
E-mail: support@enterasys.com
|
|
WWW: http://www.enterasys.com"
|
|
DESCRIPTION
|
|
"This MIB module defines a portion of the SNMP MIB under
|
|
the Enterasys Networks enterprise OID pertaining to the
|
|
IP Service Level Agreement (SLA) functionality.
|
|
|
|
This MIB was designed to be used for configuring IP SLA
|
|
entries, scheduling those entries to run tests, and retrieving
|
|
the round-trip-time and packet delay variation (jitter) data.
|
|
Management entities MAY use this data to verify the service
|
|
provider is meeting its SLA obligation."
|
|
|
|
REVISION "201302061826Z" -- Wed Feb 6 18:26 UTC 2013
|
|
DESCRIPTION "The initial version of this MIB module"
|
|
::= { etsysModules 94 }
|
|
|
|
-- Textual Conventions
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Branches
|
|
-- -------------------------------------------------------------
|
|
etsysIpSla OBJECT IDENTIFIER ::= { etsysIpSlaMIB 1 }
|
|
|
|
etsysIpSlaGlobals OBJECT IDENTIFIER ::= { etsysIpSla 1 }
|
|
etsysIpSlaTables OBJECT IDENTIFIER ::= { etsysIpSla 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB Objects
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIpSlaMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of IP SLA entries that can be configured
|
|
within the system."
|
|
::= { etsysIpSlaGlobals 1 }
|
|
|
|
etsysIpSlaEntriesInUse OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP SLA entries currently configured within the
|
|
system."
|
|
::= { etsysIpSlaGlobals 2 }
|
|
|
|
etsysIpSlaMaxDataEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of data constructs available within the
|
|
system. Row entries in the etsysIpSlaRttDataTable and the
|
|
etsysIpSlaPdvDataTable consume this resource."
|
|
::= { etsysIpSlaGlobals 3 }
|
|
|
|
etsysIpSlaDataEntriesInUse OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of data constructs currently used within the system
|
|
Row entries in the etsysIpSlaRttDataTable and the
|
|
etsysIpSlaPdvDataTable consume this resource."
|
|
::= { etsysIpSlaGlobals 4 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Configuration Table
|
|
--
|
|
etsysIpSlaConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the configuration parameters and attributes
|
|
pertaining to an IP SLA entry.
|
|
|
|
The agent limits the size of this table. The object
|
|
etsysIpSlaMaxEntries defines the maximum number of entries."
|
|
::= { etsysIpSlaTables 1 }
|
|
|
|
etsysIpSlaConfigEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaConfigTable."
|
|
INDEX { etsysIpSlaConfigIndex }
|
|
::= { etsysIpSlaConfigTable 1 }
|
|
|
|
EtsysIpSlaConfigEntry ::= SEQUENCE {
|
|
etsysIpSlaConfigIndex Unsigned32,
|
|
etsysIpSlaConfigType INTEGER,
|
|
etsysIpSlaConfigDestType InetAddressType,
|
|
etsysIpSlaConfigDestAddr InetAddress,
|
|
etsysIpSlaConfigDestPort InetPortNumber,
|
|
etsysIpSlaConfigProbeName SnmpAdminString,
|
|
etsysIpSlaConfigPathCount Unsigned32,
|
|
etsysIpSlaConfigHopCount Unsigned32,
|
|
etsysIpSlaConfigHistoryCollections Unsigned32,
|
|
etsysIpSlaConfigHistoryBuckets Unsigned32,
|
|
etsysIpSlaConfigHistoryBucketType INTEGER,
|
|
etsysIpSlaConfigHistorySamples Unsigned32,
|
|
etsysIpSlaConfigHistoryInterval Unsigned32,
|
|
etsysIpSlaConfigHistoryAgeout Unsigned32,
|
|
etsysIpSlaConfigHistoryWrap INTEGER,
|
|
etsysIpSlaConfigDistributionCount Unsigned32,
|
|
etsysIpSlaConfigDistributionInterval Unsigned32,
|
|
etsysIpSlaConfigStatisticsCollections Unsigned32,
|
|
etsysIpSlaConfigStatus RowStatus
|
|
}
|
|
|
|
etsysIpSlaConfigIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies a row in the
|
|
etsysIpSlaConfigTable.
|
|
|
|
This is the primary index used for all tables that have an
|
|
association with an IP SLA entry."
|
|
::= { etsysIpSlaConfigEntry 1 }
|
|
|
|
etsysIpSlaConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
echo(1),
|
|
jitter(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the IP SLA entry.
|
|
|
|
echo(1) - Specifies that the IP SLA entry collect the
|
|
round-trip-time data for a destination host. The IP
|
|
SLA entry MUST use a probe of type 'icmpTs'.
|
|
|
|
jitter(2) - Specifies that the IP SLA entry collect the packet
|
|
delay variation (jitter) and round-trip-time data
|
|
for a destination host. The IP SLA entry MUST use
|
|
a probe of type 'icmpTs'. Both the source and
|
|
destination hosts MUST have clock synchorinzation
|
|
enabled for accurate packet delay variation data."
|
|
REFERENCE
|
|
"Tracked Objects MIB, Table etsysTrackedObjectsProbeTable,
|
|
Objects etsysTrackedObjectsProbeType."
|
|
DEFVAL { echo }
|
|
::= { etsysIpSlaConfigEntry 2 }
|
|
|
|
etsysIpSlaConfigDestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address family of the destination host specified in
|
|
etsysIpSlaConfigDestAddr."
|
|
DEFVAL { unknown }
|
|
::= { etsysIpSlaConfigEntry 3 }
|
|
|
|
etsysIpSlaConfigDestAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of the host. The IP SLA entry collects
|
|
the data specified in etsysIpSlaConfigType for packets sent to
|
|
this host."
|
|
DEFVAL { "" }
|
|
::= { etsysIpSlaConfigEntry 4 }
|
|
|
|
etsysIpSlaConfigDestPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the service on the destination host. The
|
|
'icmpTs' entries MUST use the default value of zero."
|
|
REFERENCE
|
|
"Tracked Objects MIB, Table etsysTrackedObjectsProbeTable,
|
|
Objects etsysTrackedObjectsProbeType."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaConfigEntry 5 }
|
|
|
|
etsysIpSlaConfigProbeName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the user configured probe this entry references.
|
|
|
|
If this value is the empty string, the default probe assigned
|
|
to the IP SLA application is used for running tests."
|
|
REFERENCE
|
|
"Tracked Objects MIB, Table etsysTrackedObjectsProbeTable,
|
|
Objects etsysTrackedObjectsProbeName."
|
|
DEFVAL { "" }
|
|
::= { etsysIpSlaConfigEntry 6 }
|
|
|
|
etsysIpSlaConfigPathCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4)
|
|
UNITS "paths"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A packet may traverse different routes to a destination host.
|
|
This value specifies how many different paths to keep track of.
|
|
Only the first etsysIpSlaConfigPathCount will be kept,
|
|
additional detected paths are ignored.
|
|
|
|
This object is only valid when the etsysIpSlaConfigType is
|
|
'echo'. An 'inconsistentValue' return code is returned for a
|
|
set operation when the type is other than 'echo'."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaConfigEntry 7 }
|
|
|
|
etsysIpSlaConfigHopCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..8)
|
|
UNITS "hops"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of hops per path the entry keeps data for. Only the
|
|
first etsysIpSlaConfigHopCount will be kept, additional hops
|
|
along the path are ignored.
|
|
|
|
This object is only valid when the etsysIpSlaConfigType is
|
|
'echo'. An 'inconsistentValue' return code is returned for a
|
|
set operation when the type is other than 'echo'."
|
|
DEFVAL { 1 }
|
|
::= { etsysIpSlaConfigEntry 8 }
|
|
|
|
etsysIpSlaConfigHistoryCollections OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of history collections to store in memory. A new
|
|
collection begins with the start of each test. The
|
|
etsysIpSlaScheduleTable dictates when tests start and stop.
|
|
|
|
Modifying this value from a larger value to a smaller value
|
|
causes the difference to be removed from memory. The
|
|
collection with higher index values are removed. The history
|
|
collections are found in the etsysIpSlaRttDataTable and the
|
|
etsysIpSlaPdvDataTable using a etsysIpSlaCollectionType of
|
|
'history'."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaConfigEntry 9 }
|
|
|
|
etsysIpSlaConfigHistoryBuckets OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..50)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of history buckets to maintain per history
|
|
collection. Each bucket contains statistical information from
|
|
the test."
|
|
DEFVAL { 15 }
|
|
::= { etsysIpSlaConfigEntry 10 }
|
|
|
|
etsysIpSlaConfigHistoryBucketType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
timed(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history bucket type. This determines the depth of each
|
|
bucket.
|
|
|
|
static(1) - A static bucket type indicates the depth of each
|
|
bucket is fixed. The depth is specified in
|
|
etsysIpSlaConfigHistorySamples.
|
|
|
|
timed(2) - A timed bucket has a variable bucket depth. The
|
|
etsysIpSlaConfigHistoryInterval specifies the
|
|
total time for the bucket. To estimate the depth
|
|
of the bucket, multiply the history interval by the
|
|
expected number of received packets per second."
|
|
REFERENCE
|
|
"Tracked Objects MIB, Table etsysTrackedObjectsProbeStatsTable,
|
|
Objects etsysTrackedObjectsProbeStatsInterval."
|
|
DEFVAL { static }
|
|
::= { etsysIpSlaConfigEntry 11 }
|
|
|
|
etsysIpSlaConfigHistorySamples OBJECT-TYPE
|
|
SYNTAX Unsigned32 (16..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the static depth of each bucket. Modifying this
|
|
value changes the depth for current and future buckets.
|
|
Previous buckets MUST NOT be modified.
|
|
|
|
This object is only valid when etsysIpSlaConfigHistoryBucketType
|
|
is 'static'. An 'inconsistentValue' return code is returned for
|
|
a set operation when the type is other than 'static'."
|
|
DEFVAL { 16 }
|
|
::= { etsysIpSlaConfigEntry 12 }
|
|
|
|
etsysIpSlaConfigHistoryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (30..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the length of time data should be continuously stored
|
|
in the same bucket. Modifying this value changes the time for
|
|
the current and future buckets. Previous buckets MUST NOT be
|
|
modified. Data in the current bucket MUST NOT be altered
|
|
either.
|
|
|
|
This object is only valid when etsysIpSlaConfigHistoryBucketType
|
|
is 'timed'. An 'inconsistentValue' return code is returned for
|
|
a set operation when the type is other than 'timed'."
|
|
DEFVAL { 30 }
|
|
::= { etsysIpSlaConfigEntry 13 }
|
|
|
|
etsysIpSlaConfigHistoryAgeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|15..7200)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time a history collection remains in memory. The
|
|
application reclaims the history collection's memory when it
|
|
ages out.
|
|
|
|
A value of zero means the history collection does not ageout."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaConfigEntry 14 }
|
|
|
|
etsysIpSlaConfigHistoryWrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wrap(1),
|
|
noWrap(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether to replace the oldest history collection with
|
|
a newer data set, or stop collecting history data when the
|
|
collection limit is reached.
|
|
|
|
wrap(1) - When the history collection reaches its limit, the
|
|
oldest history collection data is replaced with the
|
|
newer data set.
|
|
noWrap(2) - Once the history collection limit is reached, no new
|
|
history collections are stored unless they age out."
|
|
DEFVAL { noWrap }
|
|
::= { etsysIpSlaConfigEntry 15 }
|
|
|
|
etsysIpSlaConfigDistributionCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|2..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of statistical distributions to keep data for. This
|
|
object only accumulates round-trip-time data calculations.
|
|
|
|
This objects works in conjunction with the
|
|
etsysIpSlaConfigDistributionInterval object. The last interval
|
|
accumulates statistical distributions for all the entries from
|
|
its interval start point to infinity (maximum value for a
|
|
32-bit integer)."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaConfigEntry 16 }
|
|
|
|
etsysIpSlaConfigDistributionInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..1000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistical distribution interval.
|
|
|
|
Example:
|
|
etsysIpSlaConfigDistributionCount = 5
|
|
etsysIpSlaConfigDistributionInterval = 20 milliseconds
|
|
|
|
Distribution 1 : < 0 - 19 ms>
|
|
Distribution 2 : <20 - 39 ms>
|
|
Distribution 3 : <40 - 59 ms>
|
|
Distribution 4 : <60 - 79 ms>
|
|
Distribution 5 : <80 - 4294967295 ms>"
|
|
DEFVAL { 25 }
|
|
::= { etsysIpSlaConfigEntry 17 }
|
|
|
|
etsysIpSlaConfigStatisticsCollections OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of statistical collections to store in memory. Each
|
|
collection consists of the summary of results and the
|
|
statistical distribution data. The summary of results consists
|
|
of the round-trip-time and, if applicable, the packet delay
|
|
variation data.
|
|
|
|
A new collection begins with the start of each test. The
|
|
etsysIpSlaScheduleTable dictates when tests start and stop.
|
|
The collection automatically wraps back to one when the
|
|
collection limit, configured by this object, is reached. The
|
|
statistics stored in the collection are cleared prior to
|
|
starting a new test.
|
|
|
|
Modifying this value from a larger to a smaller value causes
|
|
the difference to be removed from memory. The collections with
|
|
the higher index values are removed. The statistical
|
|
collections are found in the etsysIpSlaRttDataTable and the
|
|
etsysIpSlaPdvDataTable."
|
|
DEFVAL { 1 }
|
|
::= { etsysIpSlaConfigEntry 18 }
|
|
|
|
etsysIpSlaConfigStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of the table by facilitating
|
|
actions such as row creation and deletion.
|
|
|
|
Creation and activation of a conceptual row in this table MUST
|
|
be performed as a single operation by setting this object to
|
|
createAndGo(4). Suspension of an active conceptual row is
|
|
not supported. Consequently, setting this object to
|
|
createAndWait(5) or notInService(2) SHALL fail."
|
|
::= { etsysIpSlaConfigEntry 19 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Schedule Table
|
|
--
|
|
etsysIpSlaScheduleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaScheduleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the scheduling parameters and attributes
|
|
pertaining to an IP SLA entry. The scheduler determines when
|
|
a test should execute, the length of time that test should run,
|
|
the number of iterations of the test, and when the next
|
|
scheduled test should start. An entry MUST exist in the
|
|
etsysIpSlaConfigTable prior to setting the scheduling objects."
|
|
::= { etsysIpSlaTables 2 }
|
|
|
|
etsysIpSlaScheduleEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaScheduleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaScheduleTable."
|
|
INDEX { etsysIpSlaConfigIndex }
|
|
::= { etsysIpSlaScheduleTable 1 }
|
|
|
|
EtsysIpSlaScheduleEntry ::= SEQUENCE {
|
|
etsysIpSlaScheduleStartTime Unsigned32,
|
|
etsysIpSlaScheduleRecurrence Unsigned32,
|
|
etsysIpSlaScheduleTestRepetitions Unsigned32,
|
|
etsysIpSlaScheduleTestDuration Unsigned32,
|
|
etsysIpSlaScheduleTestFrequency Unsigned32,
|
|
etsysIpSlaScheduleTestState INTEGER,
|
|
etsysIpSlaScheduleTestStatus SnmpAdminString
|
|
}
|
|
|
|
etsysIpSlaScheduleStartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the initial start time for the entry's set of test
|
|
cycles. This value is expressed in seconds since the Epoch
|
|
(Jan 1, 1970).
|
|
|
|
The scheduled entry MUST be cancelled prior to modifying the
|
|
start time. An 'inconsistentValue' return code is returned for
|
|
a set operation with a value other than zero if the
|
|
etsysIpSlaScheduleTestState is NOT 'inactive'.
|
|
|
|
Setting this value to zero cancels the scheduled tests and
|
|
the etsysIpSlaScheduleTestState transitions to 'inactive'."
|
|
REFERENCE
|
|
"POSIX.1-2001."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaScheduleEntry 1 }
|
|
|
|
etsysIpSlaScheduleRecurrence OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|120..7776000)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the time between multiple test cycles.
|
|
This value is the length of time between the end of one test
|
|
cycle and the start of the next test cycle.
|
|
|
|
A new test cycle SHALL NOT begin while a current cycle is
|
|
running. Thus, this value SHOULD be greater than the result of
|
|
the number repetitions multiplied by the sum of the duration and
|
|
the frequency. If the value is less than the run time of a test
|
|
cycle, the overlapping test cycles are skipped.
|
|
|
|
For example, if there are two repetitions with a duration of 60
|
|
seconds and a frequency of 30 seconds, the test cycle runs for
|
|
180 seconds.
|
|
|
|
Notes: Maximum value is 90 days; a value of 86400 is one day.
|
|
|
|
A value of zero indicates this scheduled entry will not repeat
|
|
its test cycle."
|
|
DEFVAL { 0 }
|
|
::= { etsysIpSlaScheduleEntry 2 }
|
|
|
|
etsysIpSlaScheduleTestRepetitions OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of test iterations per test cycle."
|
|
DEFVAL { 1 }
|
|
::= { etsysIpSlaScheduleEntry 3 }
|
|
|
|
etsysIpSlaScheduleTestDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32 (30..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the time each test iteration should execute."
|
|
DEFVAL { 30 }
|
|
::= { etsysIpSlaScheduleEntry 4 }
|
|
|
|
etsysIpSlaScheduleTestFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32 (30..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time between each test iteration."
|
|
DEFVAL { 30 }
|
|
::= { etsysIpSlaScheduleEntry 5 }
|
|
|
|
etsysIpSlaScheduleTestState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
complete(2),
|
|
running(3),
|
|
queued(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the state of the IP SLA entry test.
|
|
|
|
inactive(1) - The entry is not currently scheduled.
|
|
complete(2) - The entry has completed its test cycle and will
|
|
not be rescheduled.
|
|
running(3) - A test cycle is currently executing.
|
|
queued(4) - The entry is on scheduler's queue and will start
|
|
when the entry expires and is removed from the
|
|
queue. At this point, it's state transitions to
|
|
'running'."
|
|
::= { etsysIpSlaScheduleEntry 6 }
|
|
|
|
etsysIpSlaScheduleTestStatus OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides a brief description of the test. The scheduler
|
|
generates this string based on the test's state and where it
|
|
is in it's tests cycle.
|
|
|
|
For example, if the etsysIpSlaScheduleTestState is 'queued'
|
|
and there is 193 seconds prior to the next test cycle starting,
|
|
the string MAY read:
|
|
|
|
Cycle begins in 193 seconds
|
|
|
|
An implementation MAY choose to always return the empty string."
|
|
::= { etsysIpSlaScheduleEntry 7 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Collection Table
|
|
--
|
|
etsysIpSlaCollectionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaCollectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides generic information about the data
|
|
collections stored in the IP SLA entry. A new collection
|
|
begins at the beginning of each test."
|
|
::= { etsysIpSlaTables 3 }
|
|
|
|
etsysIpSlaCollectionEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaCollectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaCollectionTable."
|
|
INDEX {
|
|
etsysIpSlaConfigIndex,
|
|
etsysIpSlaCollectionType,
|
|
etsysIpSlaCollectionIndex
|
|
}
|
|
::= { etsysIpSlaCollectionTable 1 }
|
|
|
|
EtsysIpSlaCollectionEntry ::= SEQUENCE {
|
|
etsysIpSlaCollectionType INTEGER,
|
|
etsysIpSlaCollectionIndex Unsigned32,
|
|
etsysIpSlaCollectionStartTime Unsigned32,
|
|
etsysIpSlaCollectionNumPaths Gauge32,
|
|
etsysIpslaCollectionNumHops Gauge32
|
|
}
|
|
|
|
etsysIpSlaCollectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
summary(1),
|
|
distribution(2),
|
|
history(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This identifies the collection type for this row entry. Each
|
|
collection will have the 'summary' data. If the
|
|
etsysIpSlaConfigDistributionCount is not zero, the collection
|
|
will have a 'distribution' set of data. If the
|
|
etsysIpSlaConfigHistoryCollections is not zero, the collection
|
|
will have a 'history' set of data.
|
|
|
|
summary(1) - The row entry data corresponds to the
|
|
cumulative statistics gathered during a test.
|
|
distribution(2) - The row entry data corresponds to the
|
|
statistical distribution of the round-trip-
|
|
time data.
|
|
history(3) - The row entry data corresponds to a storage
|
|
history collection of data."
|
|
::= { etsysIpSlaCollectionEntry 1 }
|
|
|
|
etsysIpSlaCollectionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies a collection of data for the
|
|
IP SLA entry."
|
|
::= { etsysIpSlaCollectionEntry 2 }
|
|
|
|
etsysIpSlaCollectionStartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time of the test for this collection of data. This
|
|
value is expressed in seconds since the Epoch (Jan 1, 1970)."
|
|
::= { etsysIpSlaCollectionEntry 3 }
|
|
|
|
etsysIpSlaCollectionNumPaths OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the total number of paths available to this collection
|
|
of data."
|
|
::= { etsysIpSlaCollectionEntry 4 }
|
|
|
|
etsysIpslaCollectionNumHops OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the total number of hops per path in this collection of
|
|
data."
|
|
::= { etsysIpSlaCollectionEntry 5 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Path and Hop Table
|
|
--
|
|
etsysIpSlaPathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaPathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the information for the path and hop
|
|
data of an IP SLA entry."
|
|
::= { etsysIpSlaTables 4 }
|
|
|
|
etsysIpSlaPathEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaPathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaPathTable."
|
|
INDEX {
|
|
etsysIpSlaConfigIndex,
|
|
etsysIpSlaCollectionType,
|
|
etsysIpSlaCollectionIndex,
|
|
etsysIpSlaPathIndex,
|
|
etsysIpSlaHopIndex
|
|
}
|
|
::= { etsysIpSlaPathTable 1 }
|
|
|
|
EtsysIpSlaPathEntry ::= SEQUENCE {
|
|
etsysIpSlaPathIndex Unsigned32,
|
|
etsysIpSlaHopIndex Unsigned32,
|
|
etsysIpSlaHopDestType InetAddressType,
|
|
etsysIpSlaHopDestAddr InetAddress
|
|
}
|
|
|
|
etsysIpSlaPathIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents a unique path discovered to reach the
|
|
destination host identified by etsysIpSlaConfigDestAddr.
|
|
|
|
A value of zero for this object and etsysIpSlaHopIndex represent
|
|
the destination host."
|
|
::= { etsysIpSlaPathEntry 1 }
|
|
|
|
etsysIpSlaHopIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the nth-hop in the path to the
|
|
destination host identified by etsysIpSlaConfigDestAddr.
|
|
|
|
A value of zero for this object and etsysIpSlaPathIndex
|
|
represent the destination host."
|
|
::= { etsysIpSlaPathEntry 2 }
|
|
|
|
etsysIpSlaHopDestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address family of the hop in the path."
|
|
::= { etsysIpSlaPathEntry 3 }
|
|
|
|
etsysIpSlaHopDestAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the hop in the path."
|
|
::= { etsysIpSlaPathEntry 4 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Round Trip Time Data Table
|
|
--
|
|
etsysIpSlaRttDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaRttDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the round-trip-time statistics data for
|
|
the IP SLA entry."
|
|
::= { etsysIpSlaTables 5 }
|
|
|
|
etsysIpSlaRttDataEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaRttDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaRttDataTable."
|
|
INDEX {
|
|
etsysIpSlaConfigIndex,
|
|
etsysIpSlaCollectionType,
|
|
etsysIpSlaCollectionIndex,
|
|
etsysIpSlaPathIndex,
|
|
etsysIpSlaHopIndex,
|
|
etsysIpSlaBucketIndex
|
|
}
|
|
::= { etsysIpSlaRttDataTable 1 }
|
|
|
|
EtsysIpSlaRttDataEntry ::= SEQUENCE {
|
|
etsysIpSlaBucketIndex Unsigned32,
|
|
etsysIpSlaBucketTime Unsigned32,
|
|
etsysIpSlaRttDataSamples Gauge32,
|
|
etsysIpSlaRttDataMinDelay Gauge32,
|
|
etsysIpSlaRttDataAvgDelay Gauge32,
|
|
etsysIpSlaRttDataMaxDelay Gauge32,
|
|
etsysIpSlaRttDataSum Gauge32,
|
|
etsysIpSlaRttDataSumSquareLow Gauge32,
|
|
etsysIpSlaRttDataSumSquareHigh Gauge32,
|
|
etsysIpSlaRttDataPktOutOfOrder Gauge32,
|
|
etsysIpSlaRttDataPktLateArrival Gauge32,
|
|
etsysIpSlaRttDataPktMissing Gauge32,
|
|
etsysIpSlaRttDataPktIpTosMismatch Gauge32,
|
|
etsysIpSlaRttDataPktVlanPcpMismatch Gauge32,
|
|
etsysIpSlaRttDataTxErrors Gauge32
|
|
}
|
|
|
|
etsysIpSlaBucketIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that identifies a set of RTT data. The value of this
|
|
object is influenced by the etsysIpSlaCollectionType.
|
|
|
|
If the collection type is 'summary', the value of this object is
|
|
one. There is only one RTT summary per data collection.
|
|
|
|
If the collection type is 'distribution' the value of this
|
|
object represents the distribution index. There is an
|
|
associated entry in the etsysIpSlaDistDataTable.
|
|
|
|
If the collection type is 'history', the value of this object
|
|
is in the range of one to etsysIpSlaConfigHistoryBuckets."
|
|
::= { etsysIpSlaRttDataEntry 1 }
|
|
|
|
etsysIpSlaBucketTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the first RTT data was stored in the bucket. This
|
|
value is expressed in seconds since the Epoch (Jan 1, 1970)."
|
|
::= { etsysIpSlaRttDataEntry 2 }
|
|
|
|
etsysIpSlaRttDataSamples OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RTT samples that were successfully measured."
|
|
::= { etsysIpSlaRttDataEntry 3 }
|
|
|
|
etsysIpSlaRttDataMinDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum RTT measurement from the successful samples."
|
|
::= { etsysIpSlaRttDataEntry 4 }
|
|
|
|
etsysIpSlaRttDataAvgDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average RTT calculated from the sum of the successful
|
|
samples."
|
|
::= { etsysIpSlaRttDataEntry 5 }
|
|
|
|
etsysIpSlaRttDataMaxDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum RTT measurement from the successful samples."
|
|
::= { etsysIpSlaRttDataEntry 6 }
|
|
|
|
etsysIpSlaRttDataSum OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The summation of the successful RTT samples."
|
|
::= { etsysIpSlaRttDataEntry 7 }
|
|
|
|
etsysIpSlaRttDataSumSquareLow OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low 32 bits of the sum of squares of the successful RTT
|
|
samples."
|
|
::= { etsysIpSlaRttDataEntry 8 }
|
|
|
|
etsysIpSlaRttDataSumSquareHigh OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high 32 bits of the sum of squares of the successful RTT
|
|
samples."
|
|
::= { etsysIpSlaRttDataEntry 9 }
|
|
|
|
etsysIpSlaRttDataPktOutOfOrder OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that arrived out of order. The RTT for
|
|
these packets are not included in any calculations."
|
|
::= { etsysIpSlaRttDataEntry 10 }
|
|
|
|
etsysIpSlaRttDataPktLateArrival OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that arrived late. The RTT for these
|
|
packets are not included in any calculations."
|
|
::= { etsysIpSlaRttDataEntry 11 }
|
|
|
|
etsysIpSlaRttDataPktMissing OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost."
|
|
::= { etsysIpSlaRttDataEntry 12 }
|
|
|
|
etsysIpSlaRttDataPktIpTosMismatch OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of reply packets whose IP TOS field mismatched the
|
|
value in the request."
|
|
::= { etsysIpSlaRttDataEntry 13 }
|
|
|
|
etsysIpSlaRttDataPktVlanPcpMismatch OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of reply packets whose VLAN PCP field mismatched
|
|
the value in the request."
|
|
::= { etsysIpSlaRttDataEntry 14 }
|
|
|
|
etsysIpSlaRttDataTxErrors OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number transmissions errors."
|
|
::= { etsysIpSlaRttDataEntry 15 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Packet Delay Variation Data Table
|
|
--
|
|
etsysIpSlaPdvDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaPdvDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the packet delay variation (jitter)
|
|
data for the IP SLA entry."
|
|
::= { etsysIpSlaTables 6 }
|
|
|
|
etsysIpSlaPdvDataEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaPdvDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaPdvDataTable."
|
|
INDEX {
|
|
etsysIpSlaConfigIndex,
|
|
etsysIpSlaCollectionType,
|
|
etsysIpSlaCollectionIndex,
|
|
etsysIpSlaPathIndex,
|
|
etsysIpSlaHopIndex,
|
|
etsysIpSlaBucketIndex
|
|
}
|
|
::= { etsysIpSlaPdvDataTable 1 }
|
|
|
|
EtsysIpSlaPdvDataEntry ::= SEQUENCE {
|
|
etsysIpSlaPdvDataSamples Gauge32,
|
|
etsysIpSlaPdvDataMinPositiveSD Gauge32,
|
|
etsysIpSlaPdvDataMaxPositiveSD Gauge32,
|
|
etsysIpSlaPdvDataNumPositiveSD Gauge32,
|
|
etsysIpSlaPdvDataSumPositiveSD Gauge32,
|
|
etsysIpSlaPdvDataSumSquarePositiveSD Gauge32,
|
|
etsysIpSlaPdvDataMinNegativeSD Gauge32,
|
|
etsysIpSlaPdvDataMaxNegativeSD Gauge32,
|
|
etsysIpSlaPdvDataNumNegativeSD Gauge32,
|
|
etsysIpSlaPdvDataSumNegativeSD Gauge32,
|
|
etsysIpSlaPdvDataSumSquareNegativeSD Gauge32,
|
|
etsysIpSlaPdvDataMinPositiveDS Gauge32,
|
|
etsysIpSlaPdvDataMaxPositiveDS Gauge32,
|
|
etsysIpSlaPdvDataNumPositiveDS Gauge32,
|
|
etsysIpSlaPdvDataSumPositiveDS Gauge32,
|
|
etsysIpSlaPdvDataSumSquarePositiveDS Gauge32,
|
|
etsysIpSlaPdvDataMinNegativeDS Gauge32,
|
|
etsysIpSlaPdvDataMaxNegativeDS Gauge32,
|
|
etsysIpSlaPdvDataNumNegativeDS Gauge32,
|
|
etsysIpSlaPdvDataSumNegativeDS Gauge32,
|
|
etsysIpSlaPdvDataSumSquareNegativeDS Gauge32,
|
|
etsysIpSlaPdvDataNumOneWaySD Gauge32,
|
|
etsysIpSlaPdvDataMinOneWaySD Gauge32,
|
|
etsysIpSlaPdvDataMaxOneWaySD Gauge32,
|
|
etsysIpSlaPdvDataSumOneWaySD Gauge32,
|
|
etsysIpSlaPdvDataSumSquareOneWaySD Gauge32,
|
|
etsysIpSlaPdvDataNumOneWayDS Gauge32,
|
|
etsysIpSlaPdvDataMinOneWayDS Gauge32,
|
|
etsysIpSlaPdvDataMaxOneWayDS Gauge32,
|
|
etsysIpSlaPdvDataSumOneWayDS Gauge32,
|
|
etsysIpSlaPdvDataSumSquareOneWayDS Gauge32
|
|
}
|
|
|
|
etsysIpSlaPdvDataSamples OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PDV samples that were successfully measured."
|
|
::= { etsysIpSlaPdvDataEntry 1 }
|
|
|
|
etsysIpSlaPdvDataMinPositiveSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum PDV of all positive values for packets sent from
|
|
the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 2 }
|
|
|
|
etsysIpSlaPdvDataMaxPositiveSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum PDV of all positive values for packets sent from
|
|
the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 3 }
|
|
|
|
etsysIpSlaPdvDataNumPositiveSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of positive PDV values for packets sent from
|
|
the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 4 }
|
|
|
|
etsysIpSlaPdvDataSumPositiveSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the positive PDV values for packets sent from the
|
|
source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 5 }
|
|
|
|
etsysIpSlaPdvDataSumSquarePositiveSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the squared positive PDV values for packets sent
|
|
from the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 6 }
|
|
|
|
etsysIpSlaPdvDataMinNegativeSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The negative PDV values are stored as absolute values. The
|
|
value of this object is the minimum value from the set of
|
|
absolute values for packets sent from the source to the
|
|
destination."
|
|
::= { etsysIpSlaPdvDataEntry 7 }
|
|
|
|
etsysIpSlaPdvDataMaxNegativeSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The negative PDV values are stored as absolute values. The
|
|
value of this object is the maximum value from the set of
|
|
absolute values for packets sent from the source to the
|
|
destination."
|
|
::= { etsysIpSlaPdvDataEntry 8 }
|
|
|
|
etsysIpSlaPdvDataNumNegativeSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of negative PDV values for packets sent from
|
|
the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 9 }
|
|
|
|
etsysIpSlaPdvDataSumNegativeSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the negative PDV values for packets sent from the
|
|
source to the destination. The absolute value is returned."
|
|
::= { etsysIpSlaPdvDataEntry 10 }
|
|
|
|
etsysIpSlaPdvDataSumSquareNegativeSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the squared negative PDV values for packets sent
|
|
from the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 11 }
|
|
|
|
etsysIpSlaPdvDataMinPositiveDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum PDV of all positive values for packets sent from
|
|
the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 12 }
|
|
|
|
etsysIpSlaPdvDataMaxPositiveDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum PDV of all positive values for packets sent from
|
|
the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 13 }
|
|
|
|
etsysIpSlaPdvDataNumPositiveDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of positive PDV values for packets sent from
|
|
the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 14 }
|
|
|
|
etsysIpSlaPdvDataSumPositiveDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the positive PDV values for packets sent from the
|
|
destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 15 }
|
|
|
|
etsysIpSlaPdvDataSumSquarePositiveDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the squared positive PDV values for packets sent
|
|
from the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 16 }
|
|
|
|
etsysIpSlaPdvDataMinNegativeDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The negative PDV values are stored as absolute values. The
|
|
value of this object is the minimum value from the set of
|
|
absolute values for packets sent from the destination to the
|
|
source."
|
|
::= { etsysIpSlaPdvDataEntry 17 }
|
|
|
|
etsysIpSlaPdvDataMaxNegativeDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The negative PDV values are stored as absolute values. The
|
|
value of this object is the maximum value from the set of
|
|
absolute values for packets sent from the destination to the
|
|
source."
|
|
::= { etsysIpSlaPdvDataEntry 18 }
|
|
|
|
etsysIpSlaPdvDataNumNegativeDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of negative PDV values for packets sent from
|
|
the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 19 }
|
|
|
|
etsysIpSlaPdvDataSumNegativeDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the negative PDV values for packets sent from the
|
|
destination to the source. The absolute value is returned."
|
|
::= { etsysIpSlaPdvDataEntry 20 }
|
|
|
|
etsysIpSlaPdvDataSumSquareNegativeDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the squared negative PDV values for packets sent
|
|
from the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 21 }
|
|
|
|
etsysIpSlaPdvDataNumOneWaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of one-way delay values for packets sent from
|
|
the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 22 }
|
|
|
|
etsysIpSlaPdvDataMinOneWaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum one-way delay value for packets sent from the
|
|
source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 23 }
|
|
|
|
etsysIpSlaPdvDataMaxOneWaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum one-way delay value for packets sent from the
|
|
source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 24 }
|
|
|
|
etsysIpSlaPdvDataSumOneWaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the one-way delays for packets sent from the source
|
|
to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 25 }
|
|
|
|
etsysIpSlaPdvDataSumSquareOneWaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of the one-way delays for packets sent from
|
|
the source to the destination."
|
|
::= { etsysIpSlaPdvDataEntry 26 }
|
|
|
|
etsysIpSlaPdvDataNumOneWayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of one-way delay values for packets sent from
|
|
the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 27 }
|
|
|
|
etsysIpSlaPdvDataMinOneWayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum one-way delay value for packets sent from the
|
|
destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 28 }
|
|
|
|
etsysIpSlaPdvDataMaxOneWayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum one-way delay value for packets sent from the
|
|
destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 29 }
|
|
|
|
etsysIpSlaPdvDataSumOneWayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the one-way delays for packets sent from the
|
|
destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 30 }
|
|
|
|
etsysIpSlaPdvDataSumSquareOneWayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of the one-way delays for packets sent from
|
|
the destination to the source."
|
|
::= { etsysIpSlaPdvDataEntry 31 }
|
|
|
|
|
|
--
|
|
-- Enterasys IP SLA Distribution Data Table
|
|
--
|
|
etsysIpSlaDistDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIpSlaDistDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the packet distribution data for the IP
|
|
SLA entries."
|
|
::= { etsysIpSlaTables 7 }
|
|
|
|
etsysIpSlaDistDataEntry OBJECT-TYPE
|
|
SYNTAX EtsysIpSlaDistDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the etsysIpSlaDistDataTable."
|
|
INDEX {
|
|
etsysIpSlaConfigIndex,
|
|
etsysIpSlaCollectionType,
|
|
etsysIpSlaCollectionIndex,
|
|
etsysIpSlaPathIndex,
|
|
etsysIpSlaHopIndex,
|
|
etsysIpSlaBucketIndex
|
|
}
|
|
::= { etsysIpSlaDistDataTable 1 }
|
|
|
|
EtsysIpSlaDistDataEntry ::= SEQUENCE {
|
|
etsysIpSlaDistMinRange Unsigned32,
|
|
etsysIpSlaDistMaxRange Unsigned32
|
|
}
|
|
|
|
etsysIpSlaDistMinRange OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the lower bound value for this statistical distribution
|
|
segment. The etsysIpSlaConfigDistributionInterval is used to
|
|
determine this value."
|
|
::= { etsysIpSlaDistDataEntry 1 }
|
|
|
|
etsysIpSlaDistMaxRange OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the upper bound value for this statistical distribution
|
|
segment. The etsysIpSlaConfigDistributionInterval is used to
|
|
determine this value."
|
|
::= { etsysIpSlaDistDataEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIpSlaConformance OBJECT IDENTIFIER ::= { etsysIpSlaMIB 2 }
|
|
|
|
etsysIpSlaGroups OBJECT IDENTIFIER ::= { etsysIpSlaConformance 1 }
|
|
etsysIpSlaCompliances OBJECT IDENTIFIER ::= { etsysIpSlaConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIpSlaGlobalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaMaxEntries,
|
|
etsysIpSlaEntriesInUse,
|
|
etsysIpSlaMaxDataEntries,
|
|
etsysIpSlaDataEntriesInUse
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines information pertaining to the global
|
|
resources used by the Enterasys IP SLA functionality."
|
|
::= { etsysIpSlaGroups 1 }
|
|
|
|
etsysIpSlaConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaConfigType,
|
|
etsysIpSlaConfigDestType,
|
|
etsysIpSlaConfigDestAddr,
|
|
etsysIpSlaConfigDestPort,
|
|
etsysIpSlaConfigProbeName,
|
|
etsysIpSlaConfigPathCount,
|
|
etsysIpSlaConfigHopCount,
|
|
etsysIpSlaConfigHistoryCollections,
|
|
etsysIpSlaConfigHistoryBuckets,
|
|
etsysIpSlaConfigHistoryBucketType,
|
|
etsysIpSlaConfigHistorySamples,
|
|
etsysIpSlaConfigHistoryInterval,
|
|
etsysIpSlaConfigHistoryAgeout,
|
|
etsysIpSlaConfigHistoryWrap,
|
|
etsysIpSlaConfigDistributionCount,
|
|
etsysIpSlaConfigDistributionInterval,
|
|
etsysIpSlaConfigStatisticsCollections,
|
|
etsysIpSlaConfigStatus,
|
|
etsysIpSlaScheduleStartTime,
|
|
etsysIpSlaScheduleRecurrence,
|
|
etsysIpSlaScheduleTestRepetitions,
|
|
etsysIpSlaScheduleTestDuration,
|
|
etsysIpSlaScheduleTestFrequency,
|
|
etsysIpSlaScheduleTestState,
|
|
etsysIpSlaScheduleTestStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines the objects used to configure and schedule
|
|
the entries used by the Enterasys IP SLA functionality."
|
|
::= { etsysIpSlaGroups 2 }
|
|
|
|
etsysIpSlaCollectionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaCollectionStartTime,
|
|
etsysIpSlaCollectionNumPaths,
|
|
etsysIpslaCollectionNumHops
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines the objects required to support the data
|
|
collections for an IP SLA entry."
|
|
::= { etsysIpSlaGroups 3 }
|
|
|
|
etsysIpSlaPathGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaHopDestType,
|
|
etsysIpSlaHopDestAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines the path and hop objects used by the IP SLA
|
|
entries."
|
|
::= { etsysIpSlaGroups 4 }
|
|
|
|
etsysIpSlaRttGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaBucketTime,
|
|
etsysIpSlaRttDataSamples,
|
|
etsysIpSlaRttDataMinDelay,
|
|
etsysIpSlaRttDataAvgDelay,
|
|
etsysIpSlaRttDataMaxDelay,
|
|
etsysIpSlaRttDataSum,
|
|
etsysIpSlaRttDataSumSquareLow,
|
|
etsysIpSlaRttDataSumSquareHigh,
|
|
etsysIpSlaRttDataPktOutOfOrder,
|
|
etsysIpSlaRttDataPktLateArrival,
|
|
etsysIpSlaRttDataPktMissing,
|
|
etsysIpSlaRttDataPktIpTosMismatch,
|
|
etsysIpSlaRttDataPktVlanPcpMismatch,
|
|
etsysIpSlaRttDataTxErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines the round-trip-time data objects defined
|
|
for the IP SLA entries used by the Enterasys IP SLA
|
|
functionality."
|
|
::= { etsysIpSlaGroups 5 }
|
|
|
|
etsysIpSlaPdvGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaPdvDataSamples,
|
|
etsysIpSlaPdvDataMinPositiveSD,
|
|
etsysIpSlaPdvDataMaxPositiveSD,
|
|
etsysIpSlaPdvDataNumPositiveSD,
|
|
etsysIpSlaPdvDataSumPositiveSD,
|
|
etsysIpSlaPdvDataSumSquarePositiveSD,
|
|
etsysIpSlaPdvDataMinNegativeSD,
|
|
etsysIpSlaPdvDataMaxNegativeSD,
|
|
etsysIpSlaPdvDataNumNegativeSD,
|
|
etsysIpSlaPdvDataSumNegativeSD,
|
|
etsysIpSlaPdvDataSumSquareNegativeSD,
|
|
etsysIpSlaPdvDataMinPositiveDS,
|
|
etsysIpSlaPdvDataMaxPositiveDS,
|
|
etsysIpSlaPdvDataNumPositiveDS,
|
|
etsysIpSlaPdvDataSumPositiveDS,
|
|
etsysIpSlaPdvDataSumSquarePositiveDS,
|
|
etsysIpSlaPdvDataMinNegativeDS,
|
|
etsysIpSlaPdvDataMaxNegativeDS,
|
|
etsysIpSlaPdvDataNumNegativeDS,
|
|
etsysIpSlaPdvDataSumNegativeDS,
|
|
etsysIpSlaPdvDataSumSquareNegativeDS,
|
|
etsysIpSlaPdvDataNumOneWaySD,
|
|
etsysIpSlaPdvDataMinOneWaySD,
|
|
etsysIpSlaPdvDataMaxOneWaySD,
|
|
etsysIpSlaPdvDataSumOneWaySD,
|
|
etsysIpSlaPdvDataSumSquareOneWaySD,
|
|
etsysIpSlaPdvDataNumOneWayDS,
|
|
etsysIpSlaPdvDataMinOneWayDS,
|
|
etsysIpSlaPdvDataMaxOneWayDS,
|
|
etsysIpSlaPdvDataSumOneWayDS,
|
|
etsysIpSlaPdvDataSumSquareOneWayDS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines the packet delay variation (jitter) data
|
|
objects defined for the IP SLA entries used by the Enterasys IP
|
|
SLA functionality."
|
|
::= { etsysIpSlaGroups 6 }
|
|
|
|
etsysIpSlaDistribGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIpSlaDistMinRange,
|
|
etsysIpSlaDistMaxRange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines the statistical distribution range data."
|
|
::= { etsysIpSlaGroups 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIpSlaCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support
|
|
etsysIpSla."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
etsysIpSlaConfigGroup,
|
|
etsysIpSlaCollectionGroup,
|
|
etsysIpSlaPathGroup,
|
|
etsysIpSlaRttGroup
|
|
}
|
|
|
|
-- -----------------------------------------------------
|
|
-- OBJECTS
|
|
-- -----------------------------------------------------
|
|
OBJECT etsysIpSlaConfigType
|
|
SYNTAX INTEGER { echo(1) }
|
|
WRITE-SYNTAX INTEGER { echo(1) }
|
|
DESCRIPTION
|
|
"Support for jitter is not required."
|
|
|
|
OBJECT etsysIpSlaConfigHistoryBucketType
|
|
SYNTAX INTEGER { static(1) }
|
|
WRITE-SYNTAX INTEGER { static(1) }
|
|
DESCRIPTION
|
|
"Support for timed is not required."
|
|
|
|
OBJECT etsysIpSlaConfigStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for createAndWait and notInService is not required."
|
|
|
|
-- -----------------------------------------------------
|
|
-- GROUPS
|
|
-- -----------------------------------------------------
|
|
GROUP etsysIpSlaGlobalGroup
|
|
DESCRIPTION
|
|
"The etsysIpSlaGlobalGroup is not mandatory but is
|
|
RECOMMENDED."
|
|
|
|
GROUP etsysIpSlaPdvGroup
|
|
DESCRIPTION
|
|
"The etsysIpSlaPdvGroup is mandatory only for the entities
|
|
implementing the packet delay variation feature with the IP
|
|
SLA functionality."
|
|
|
|
GROUP etsysIpSlaDistribGroup
|
|
DESCRIPTION
|
|
"The etsysIpSlaDistribGroup is mandatory only for entities
|
|
that support statistical distribution of the round-trip-time
|
|
data."
|
|
|
|
::= { etsysIpSlaCompliances 1 }
|
|
|
|
END
|