WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/ekinops/EKINOPS-Pmapc-MIB

3065 lines
81 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-- *****************************************************************
-- EKINOPS-Pmapc.TXT: MIB
--
--MIB Part Number:3MI00206AEAD
--MIB Version:01
--
-- Copyright (c) 2016 by Ekinops
-- All rights reserved.
--
-- *****************************************************************
EKINOPS-Pmapc-MIB DEFINITIONS ::= BEGIN
IMPORTS
ekinops,
EkiState,
EkiOnOff,
EkiMode,
EkiProtocol,
EkiApiState,
EkiSynchroMode,
EkiMeasureType
FROM EKINOPS-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32,
Counter32,
IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString
FROM SNMPv2-TC;
modulePmapc MODULE-IDENTITY
LAST-UPDATED "201605230000Z"
ORGANIZATION "Ekinops"
CONTACT-INFO
"Ekinops
3, rue Blaise Pascal
F-22300 Lannion / FRANCE
Tel : +33 (0)2 96 05 00 30
Fax : +33 (0)2 96 48 62 39
E-mail: support@ekinops.net"
DESCRIPTION
"MIB for the Ekinops Pmapc hardware."
REVISION "200905290000Z"
DESCRIPTION
"Initial Version."
REVISION "200909290000Z"
DESCRIPTION
"CondTypeParameters insertion"
REVISION "201002250000Z"
DESCRIPTION
"Probcause,AlarmType - NMS"
REVISION "201011050000Z"
DESCRIPTION
"Formulas in comments"
REVISION "201012140000Z"
DESCRIPTION
"Add Inventory of the lasers"
REVISION "201207040000Z"
DESCRIPTION
"Minor cosmetic updates"
REVISION "201403250000Z"
DESCRIPTION
"Probcause,AlarmType - NMS completion"
REVISION "201411210000Z"
DESCRIPTION
"Labels cosmetic updates"
REVISION "201605230000Z"
DESCRIPTION
"New AlarmType – synthesisAlarm (12)"
::= { ekinops 42 }
--- *****************************************************
--- LEAF LEVEL 2
--- *****************************************************
pmapcalarms OBJECT IDENTIFIER ::= { modulePmapc 2 }
pmapcAlmOther OBJECT IDENTIFIER ::= { pmapcalarms 1 }
pmapcAlmOtherNurg OBJECT IDENTIFIER ::= { pmapcAlmOther 1 }
pmapcAlmOtherUrg OBJECT IDENTIFIER ::= { pmapcAlmOther 2 }
pmapcAlmOtherCrit OBJECT IDENTIFIER ::= { pmapcAlmOther 3 }
pmapcAlmClient OBJECT IDENTIFIER ::= { pmapcalarms 2 }
pmapcAlmClientNurg OBJECT IDENTIFIER ::= { pmapcAlmClient 1 }
pmapcAlmClientUrg OBJECT IDENTIFIER ::= { pmapcAlmClient 2 }
pmapcAlmClientCrit OBJECT IDENTIFIER ::= { pmapcAlmClient 3 }
pmapcAlmLine OBJECT IDENTIFIER ::= { pmapcalarms 3 }
pmapcAlmLineNurg OBJECT IDENTIFIER ::= { pmapcAlmLine 1 }
pmapcAlmLineUrg OBJECT IDENTIFIER ::= { pmapcAlmLine 2 }
pmapcAlmLineCrit OBJECT IDENTIFIER ::= { pmapcAlmLine 3 }
pmapcmeasures OBJECT IDENTIFIER ::= { modulePmapc 3 }
pmapcMesrOther OBJECT IDENTIFIER ::= { pmapcmeasures 1 }
pmapcMesrClient OBJECT IDENTIFIER ::= { pmapcmeasures 2 }
pmapcMesrLine OBJECT IDENTIFIER ::= { pmapcmeasures 3 }
pmapccontrolsWrite OBJECT IDENTIFIER ::= { modulePmapc 6 }
pmapcCtrlOther OBJECT IDENTIFIER ::= { pmapccontrolsWrite 1 }
pmapcCtrlClient OBJECT IDENTIFIER ::= { pmapccontrolsWrite 2 }
pmapcCtrlLine OBJECT IDENTIFIER ::= { pmapccontrolsWrite 3 }
pmapcri OBJECT IDENTIFIER ::= { modulePmapc 7 }
pmapcriTable OBJECT IDENTIFIER ::= { pmapcri 1 }
pmapcConfig OBJECT IDENTIFIER ::= { modulePmapc 9 }
pmapctraps OBJECT IDENTIFIER ::= { modulePmapc 10 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- TEXTUAL-CONVENTION
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- REMOTE INVENTORY
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
pmapcRinvReloadInventory OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reload the inventory: This OID triggers an
inventory reload."
::= { pmapcri 2 }
pmapcRinvHwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"HW platform description: This OID contains the
description of the Hardware platform."
::= { pmapcri 3 }
pmapcRinvModulePlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module platform description: This OID contains the
description of the Module."
::= { pmapcri 4 }
pmapcRinvSwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SW platform description: This OID contains the
description of the Software platform."
::= { pmapcri 5 }
pmapcRinvLaser1Table OBJECT-TYPE
SYNTAX SEQUENCE OF PmapcRinvLaser1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of the laser clients on the selected module"
::= { pmapcriTable 1 }
pmapcRinvLaser1Entry OBJECT-TYPE
SYNTAX PmapcRinvLaser1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row definition for the laser client table"
INDEX { pmapcRinvLaser1Index }
::= { pmapcRinvLaser1Table 1 }
PmapcRinvLaser1Entry::=
SEQUENCE {
pmapcRinvLaser1Index
Integer32,
pmapcRinvLaser1
DisplayString
}
pmapcRinvLaser1Index OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for laser client table"
::= { pmapcRinvLaser1Entry 1 }
pmapcRinvLaser1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inventory for the laser client: This OID contains the inventory for the laser client"
::= { pmapcRinvLaser1Entry 2 }
pmapcRinvLaser2Table OBJECT-TYPE
SYNTAX SEQUENCE OF PmapcRinvLaser2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of the laser clients on the selected module"
::= { pmapcriTable 2 }
pmapcRinvLaser2Entry OBJECT-TYPE
SYNTAX PmapcRinvLaser2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row definition for the laser client table"
INDEX { pmapcRinvLaser2Index }
::= { pmapcRinvLaser2Table 1 }
PmapcRinvLaser2Entry::=
SEQUENCE {
pmapcRinvLaser2Index
Integer32,
pmapcRinvLaser2
DisplayString
}
pmapcRinvLaser2Index OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for laser client table"
::= { pmapcRinvLaser2Entry 1 }
pmapcRinvLaser2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inventory for the laser client: This OID contains the inventory for the laser client"
::= { pmapcRinvLaser2Entry 2 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- ALARMS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synthAlm0 article
--- *****************************************************
pmapcAlmsynthAlm0 OBJECT IDENTIFIER ::= { pmapcAlmOtherCrit 0 }
pmapcAlmDefFuseB OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fuse B Fail :This OID indicates
that the fuse of the power input
B is in fail condition <Help>
Status of the Fuse B <Condtype>
DEF_FUSE_B <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 16 }
pmapcAlmDefFuseA OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fuse A Fail :This OID indicates
that the fuse of the power input
A is in fail condition <Help>
Status of the Fuse A <Condtype>
DEF_FUSE_A <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 15 }
pmapcAlmModuleGlobFailure OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Failure :This OID is set
on detection of a failure originating
from the PM <Condtype> MODULE_GLOB_FAILURE
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 9 }
pmapcAlmPwrOutWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Output Warning :This OID
indicates that the power output
on the transmit side is in warning
condition <Help> This warning
indicates that the power output
is in a warning out of range <Condtype>
PWR_OUT_WNG <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 8 }
pmapcAlmPwrOutAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Output Alarm :This OID indicates
that the power output on the transmit
side is in fail condition <Help>
This alarm indicates that the
power output is in an alarm out
of range <Condtype> PWR_OUT_ALA
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 7 }
pmapcAlmPwrInWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input Warning :This OID
indicates that the power input
on the transmit side is in warning
condition <Help> This warning
indicates that the power input
is in a warning out of range <Condtype>
PWR_IN_WNG <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 6 }
pmapcAlmPwrInAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input Alarm :This OID indicates
that the power input on the transmit
side is in fail condition <Help>
This alarm indicates that the
power input is in an alarm out
of range <Condtype> PWR_IN_ALA
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmsynthAlm0 5 }
--- *****************************************************
--- LEAF for the synthAlm2 article
--- *****************************************************
pmapcAlmsynthAlm2 OBJECT IDENTIFIER ::= { pmapcAlmOtherNurg 2 }
pmapcAlmCorrelatOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Not Used :This OID, when set,
indicates that alarm correlation
is not being performed. <Condtype>
CORRELAT_OFF <Probcause> other
(1) <Alarmtype> other (1) <Polarity>
(2)
"
::= { pmapcAlmsynthAlm2 4 }
pmapcAlmConfTableLoad OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM Configuration Load :This OID
is at 1 during the loading of
configuration tables in the modules
RAM. <Condtype> CONF_TABLE_LOAD
<Probcause> other (1) <Alarmtype>
other (1) <Polarity> (2)
"
::= { pmapcAlmsynthAlm2 3 }
pmapcAlmInvUpload OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Inventory Upload :This OID is
at 1 during the uploading of PM
inventory information. <Condtype>
INV_UPLOAD <Probcause> other (1)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { pmapcAlmsynthAlm2 2 }
pmapcAlmConfTableSave OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM Configuration Save :This OID
is at 1 during the saving of a
new configuration table in the
module Flash memory. <Condtype>
CONF_TABLE_SAVE <Probcause> other
(1) <Alarmtype> other (1) <Polarity>
(2)
"
::= { pmapcAlmsynthAlm2 1 }
--- *****************************************************
--- LEAF for the synthAlmLaser1 article
--- *****************************************************
pmapcAlmsynthAlmLaser1 OBJECT IDENTIFIER ::= { pmapcAlmClientCrit 8 }
pmapcAlmLas1FailAcc OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Fail :This
OID indicates a failure on the
Stuffing Wavelength Laser 1 <Condtype>
LAS1_FAIL_ACC <Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser1 12 }
pmapcAlmLas1MeasAlm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Alarm :This
OID indicates if an alarm is present
coming out of Stuffing Wavelength
Laser 1 monitoring <Help> This
alarm indicates if a monitoring
alarm has been detected on the
Laser 1 <Condtype> LAS1_MEAS_ALM
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser1 10 }
pmapcAlmLas1MeasWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Warning :This
OID indicates a warning is present
coming out of Stuffing Wavelength
Laser 1 monitoring <Help> This
alarm indicates if a monitoring
warning has been detected on the
Laser 1 <Condtype> LAS1_MEAS_WNG
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser1 9 }
pmapcAlmLas1LocalOos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Out Of Service
:This OID indicates that the Stuffing
Wavelength Laser 1 is In Service
(1) of Out or Service (2). <Help>
This status indicates if the
Laser 1 is in service <Condtype>
LAS1_LOCAL_OOS <Probcause> informationalStatus(1000)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { pmapcAlmsynthAlmLaser1 6 }
pmapcAlmLas1HwFailAcc OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 HW Fail :This
OID indicates a hardware failure
on the Stuffing Wavelength Laser
1 <Condtype> LAS1_HW_FAIL_ACC <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmapcAlmsynthAlmLaser1 4 }
pmapcAlmLas1InitNotCompl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Not Ready
:This OID indicates that the optical
interface of the Stuffing Wavelength
Laser 1 is not operational. <Help>
This status indicates if Laser
1 has been correctly initialized
<Condtype> LAS1_INIT_NOT_COMPL
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser1 2 }
--- *****************************************************
--- LEAF for the synthAlmLaser2 article
--- *****************************************************
pmapcAlmsynthAlmLaser2 OBJECT IDENTIFIER ::= { pmapcAlmClientCrit 9 }
pmapcAlmLas2FailAcc OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Fail :This
OID indicates a failure on the
Stuffing Wavelength Laser 2 <Condtype>
LAS2_FAIL_ACC <Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser2 12 }
pmapcAlmLas2MeasAlm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Alarm :This
OID indicates if an alarm is present
coming out of Stuffing Wavelength
Laser 2 monitoring <Help> This
alarm indicates if a monitoring
alarm has been detected on the
Laser 2 <Condtype> LAS2_MEAS_ALM
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser2 10 }
pmapcAlmLas2MeasWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Warning :This
OID indicates a warning is present
coming out of Stuffing Wavelength
Laser 2 monitoring <Help> This
alarm indicates if a monitoring
warning has been detected on the
Laser 2 <Condtype> LAS2_MEAS_WNG
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser2 9 }
pmapcAlmLas2LocalOos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Out Of Service
:This OID indicates that the Stuffing
Wavelength Laser 2 is In Service
(2) of Out or Service (2). <Help>
This status indicates if the
Laser 2 is in service <Condtype>
LAS2_LOCAL_OOS <Probcause> informationalStatus(1000)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { pmapcAlmsynthAlmLaser2 6 }
pmapcAlmLas2HwFailAcc OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 HW Fail :This
OID indicates a hardware failure
on the Stuffing Wavelength Laser
2 <Condtype> LAS2_HW_FAIL_ACC <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmapcAlmsynthAlmLaser2 4 }
pmapcAlmLas2InitNotCompl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Not Ready
:This OID indicates that the optical
interface of the Stuffing Wavelength
Laser 2 is not operational. <Help>
This status indicates if Laser
2 has been correctly initialized
<Condtype> LAS2_INIT_NOT_COMPL
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmsynthAlmLaser2 2 }
--- *****************************************************
--- LEAF for the laser1Alm article
--- *****************************************************
pmapcAlmlaser1Alm OBJECT IDENTIFIER ::= { pmapcAlmClientUrg 16 }
pmapcAlmLas1Tec1Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 TEC Fail :This
OID indicates that the TEC of the
Stuffing Wavelength Laser 1 failed
on the transmit side. <Help>
This alarm indicates if the TEC
of the Laser 1 of the transmit
line is in a fail condition <Condtype>
LAS1_TEC1_FAIL <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1Alm 2 }
pmapcAlmLas1Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Fail :This
OID indicates that the Stuffing
Wavelength Laser 1 failed on the
transmit side <Help> This alarm
indicates if the laser of the transmit
line is in a fail condition <Condtype>
LAS1_FAIL <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1Alm 1 }
--- *****************************************************
--- LEAF for the laser1MeasAlm article
--- *****************************************************
pmapcAlmlaser1MeasAlm OBJECT IDENTIFIER ::= { pmapcAlmClientUrg 17 }
pmapcAlmILas1HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Current High Alarm :This
OID indicates that the current
of the Stuffing Wavelength Laser
1 is higher than the alarm threshold
<Help> This alarm indicates
if the current of the Laser 1
is too high <Condtype> I_LAS1_HIGH_ALA
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 8 }
pmapcAlmILas1LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Current Low Alarm :This
OID indicates that the current
of the Stuffing Wavelength Laser
1 is lower than the alarm threshold
<Help> This alarm indicates
if the current of the Laser 1
is too low <Condtype> I_LAS1_LOW_ALA
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 7 }
pmapcAlmVtecLas1HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Volt High Alarm :This
OID indicates that the TEC voltage
of the Stuffing Wavelength Laser
1 is higher than the alarm threshold
<Help> This alarm indicates
if the TEC voltage of the Laser
1 is too high <Condtype> VTEC_LAS1_HIGH_ALA
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 6 }
pmapcAlmVtecLas1LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Volt Low Alarm :This
OID indicates that the TEC voltage
of the Stuffing Wavelength Laser
1 is lower than the alarm threshold
<Help> This alarm indicates
if the TEC voltage of the Laser
1 is too low <Condtype> VTEC_LAS1_LOW_ALA
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 5 }
pmapcAlmVthLas1HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Temp High Alarm :This
OID indicates that the TEC temperature
of the Stuffing Wavelength Laser
1 is higher than the alarm threshold
<Help> This alarm indicates
if the TEC temperature of the
Laser 1 is too high <Condtype>
VTH_LAS1_HIGH_ALA <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 4 }
pmapcAlmVthLas1LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Temp Low Alarm :This
OID indicates that the TEC temperature
of the Stuffing Wavelength Laser
1 is lower than the alarm threshold
<Help> This alarm indicates
if the TEC temperature of the
Laser 1 is too low <Condtype>
VTH_LAS1_LOW_ALA <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 3 }
pmapcAlmPwrLas1HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Pwr High Alarm :This OID
indicates that transmit power of
the Stuffing Wavelength Laser 1
is higher than the alarm threshold
<Help> This alarm indicates
if the transmit power on the transmit
side of the Laser 1 is too high
<Condtype> PWR_LAS1_HIGH_ALA <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 2 }
pmapcAlmPwrLas1LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Pwr Low Alarm :This OID
indicates that transmit power of
the Stuffing Wavelength Laser 1
is lower than the alarm threshold
<Help> This alarm indicates
if the transmit power on the transmit
side of the Laser 1 is too low
<Condtype> PWR_LAS1_LOW_ALA <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasAlm 1 }
--- *****************************************************
--- LEAF for the laser1MeasWng article
--- *****************************************************
pmapcAlmlaser1MeasWng OBJECT IDENTIFIER ::= { pmapcAlmClientNurg 18 }
pmapcAlmILas1HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Current High Warning :This
OID indicates that the current
of the Stuffing Wavelength Laser
1 is higher than the warning threshold
<Help> This warning indicates
if the current of the Laser 1 is
too high <Condtype> I_LAS1_HIGH_WNG
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 8 }
pmapcAlmILas1LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Current Low Warning :This
OID indicates that the current
of the Stuffing Wavelength Laser
1 is lower than the warning threshold
<Help> This warning indicates
if the current of the Laser 1 is
too low <Condtype> I_LAS1_LOW_WNG
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 7 }
pmapcAlmVtecLas1HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Volt High Warning
:This OID indicates that the TEC
voltage of the Stuffing Wavelength
Laser 1 is higher than the warning
threshold <Help> This warning
indicates if the TEC voltage of
the Laser 1 is too high <Condtype>
VTEC_LAS1_HIGH_WNG <Probcause>
powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmapcAlmlaser1MeasWng 6 }
pmapcAlmVtecLas1LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Volt Low Warning :This
OID indicates that the TEC voltage
of the Stuffing Wavelength Laser
1 is lower than the warning threshold
<Help> This warning indicates
if the TEC voltage of the Laser
1 is too low <Condtype> VTEC_LAS1_LOW_WNG
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 5 }
pmapcAlmVthLas1HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Temp High Warning
:This OID indicates that the TEC
temperature of the Stuffing Wavelength
Laser 1 is higher than the warning
threshold <Help> This warning
indicates if the TEC temperature
of the Laser 1 is too high <Condtype>
VTH_LAS1_HIGH_WNG <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 4 }
pmapcAlmVthLas1LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 TEC Temp Low Warning :This
OID indicates that the TEC temperature
of the Stuffing Wavelength Laser
1 is lower than the warning threshold
<Help> This warning indicates
if the TEC temperature of the Laser
1 is too low <Condtype> VTH_LAS1_LOW_WNG
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 3 }
pmapcAlmPwrLas1HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Pwr High Warning :This
OID indicates that transmit power
of the Stuffing Wavelength Laser
1 is higher than the warning threshold
<Help> This warning indicates
if the transmit power on the transmit
side of the Laser 1 is too high
<Condtype> PWR_LAS1_HIGH_WNG <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 2 }
pmapcAlmPwrLas1LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 1 Pwr Low Warning :This
OID indicates that transmit power
of the Stuffing Wavelength Laser
1 is lower than the warning threshold
<Help> This warning indicates
if the transmit power on the transmit
side of the Laser 1 is too low
<Condtype> PWR_LAS1_LOW_WNG <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser1MeasWng 1 }
--- *****************************************************
--- LEAF for the laser2Alm article
--- *****************************************************
pmapcAlmlaser2Alm OBJECT IDENTIFIER ::= { pmapcAlmLineUrg 24 }
pmapcAlmLas2TecFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 TEC Fail :This
OID indicates that the TEC of the
Stuffing Wavelength Laser 2 failed
on the transmit side. <Help>
This alarm indicates if the TEC
of the Laser 2 of the transmit
line is in a fail condition <Condtype>
LAS2_TEC_FAIL <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2Alm 2 }
pmapcAlmLas2Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Fail :This
OID indicates that the Stuffing
Wavelength Laser 2 failed on the
transmit side <Help> This alarm
indicates if the laser of the transmit
line is in a fail condition <Condtype>
LAS2_FAIL <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2Alm 1 }
--- *****************************************************
--- LEAF for the laser2MeasAla article
--- *****************************************************
pmapcAlmlaser2MeasAla OBJECT IDENTIFIER ::= { pmapcAlmLineUrg 25 }
pmapcAlmILas2HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Current High Alarm :This
OID indicates that the current
of the Stuffing Wavelength Laser
2 is higher than the alarm threshold
<Help> This alarm indicates
if the current of the Laser 2
is too high <Condtype> I_LAS2_HIGH_ALA
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 8 }
pmapcAlmILas2LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Current Low Alarm :This
OID indicates that the current
of the Stuffing Wavelength Laser
2 is lower than the alarm threshold
<Help> This alarm indicates
if the current of the Laser 2
is too low <Condtype> I_LAS2_LOW_ALA
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 7 }
pmapcAlmVtecLas2HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Volt High Alarm :This
OID indicates that the TEC voltage
of the Stuffing Wavelength Laser
2 is higher than the alarm threshold
<Help> This alarm indicates
if the TEC voltage of the Laser
2 is too high <Condtype> VTEC_LAS2_HIGH_ALA
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 6 }
pmapcAlmVtecLas2LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Volt Low Alarm :This
OID indicates that the TEC voltage
of the Stuffing Wavelength Laser
2 is lower than the alarm threshold
<Help> This alarm indicates
if the TEC voltage of the Laser
2 is too low <Condtype> VTEC_LAS2_LOW_ALA
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 5 }
pmapcAlmVthLas2HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Temp High Alarm :This
OID indicates that the TEC temperature
of the Stuffing Wavelength Laser
2 is higher than the alarm threshold
<Help> This alarm indicates
if the TEC temperature of the
Laser 2 is too high <Condtype>
VTH_LAS2_HIGH_ALA <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 4 }
pmapcAlmVthLas2LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Temp Low Alarm :This
OID indicates that the TEC temperature
of the Stuffing Wavelength Laser
2 is lower than the alarm threshold
<Help> This alarm indicates
if the TEC temperature of the
Laser 2 is too low <Condtype>
VTH_LAS2_LOW_ALA <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 3 }
pmapcAlmPwrLas2HighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Pwr High Alarm :This OID
indicates that transmit power of
the Stuffing Wavelength Laser 2
is higher than the alarm threshold
<Help> This alarm indicates
if the transmit power on the transmit
side of the Laser 2 is too high
<Condtype> PWR_LAS2_HIGH_ALA <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 2 }
pmapcAlmPwrLas2LowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Pwr Low Alarm :This OID
indicates that transmit power of
the Stuffing Wavelength Laser 2
is lower than the alarm threshold
<Help> This alarm indicates
if the transmit power on the transmit
side of the Laser 2 is too low
<Condtype> PWR_LAS2_LOW_ALA <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasAla 1 }
--- *****************************************************
--- LEAF for the laser2MeasWng article
--- *****************************************************
pmapcAlmlaser2MeasWng OBJECT IDENTIFIER ::= { pmapcAlmLineNurg 26 }
pmapcAlmILas2HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Current High Warning :This
OID indicates that the current
of the Stuffing Wavelength Laser
2 is higher than the warning threshold
<Help> This warning indicates
if the current of the Laser 2 is
too high <Condtype> I_LAS2_HIGH_WNG
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 8 }
pmapcAlmILas2LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Current Low Warning :This
OID indicates that the current
of the Stuffing Wavelength Laser
2 is lower than the warning threshold
<Help> This warning indicates
if the current of the Laser 2 is
too low <Condtype> I_LAS2_LOW_WNG
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 7 }
pmapcAlmVtecLas2HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Volt High Warning
:This OID indicates that the TEC
voltage of the Stuffing Wavelength
Laser 2 is higher than the warning
threshold <Help> This warning
indicates if the TEC voltage of
the Laser 2 is too high <Condtype>
VTEC_LAS2_HIGH_WNG <Probcause>
powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmapcAlmlaser2MeasWng 6 }
pmapcAlmVtecLas2LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Volt Low Warning :This
OID indicates that the TEC voltage
of the Stuffing Wavelength Laser
2 is lower than the warning threshold
<Help> This warning indicates
if the TEC voltage of the Laser
2 is too low <Condtype> VTEC_LAS2_LOW_WNG
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 5 }
pmapcAlmVthLas2HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Temp High Warning
:This OID indicates that the TEC
temperature of the Stuffing Wavelength
Laser 2 is higher than the warning
threshold <Help> This warning
indicates if the TEC temperature
of the Laser 2 is too high <Condtype>
VTH_LAS2_HIGH_WNG <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 4 }
pmapcAlmVthLas2LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 TEC Temp Low Warning :This
OID indicates that the TEC temperature
of the Stuffing Wavelength Laser
2 is lower than the warning threshold
<Help> This warning indicates
if the TEC temperature of the Laser
2 is too low <Condtype> VTH_LAS2_LOW_WNG
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 3 }
pmapcAlmPwrLas2HighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Pwr High Warning :This
OID indicates that transmit power
of the Stuffing Wavelength Laser
2 is higher than the warning threshold
<Help> This warning indicates
if the transmit power on the transmit
side of the Laser 2 is too high
<Condtype> PWR_LAS2_HIGH_WNG <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 2 }
pmapcAlmPwrLas2LowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Laser 2 Pwr Low Warning :This
OID indicates that transmit power
of the Stuffing Wavelength Laser
2 is lower than the warning threshold
<Help> This warning indicates
if the transmit power on the transmit
side of the Laser 2 is too low
<Condtype> PWR_LAS2_LOW_WNG <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmlaser2MeasWng 1 }
--- *****************************************************
--- LEAF for the moduleAlarm article
--- *****************************************************
pmapcAlmmoduleAlarm OBJECT IDENTIFIER ::= { pmapcAlmOtherUrg 64 }
pmapcAlmLossInputSignal OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Loss Of Input Signal :This OID
indicates there is a Loss of Signal
on the input of the module. <Help>
This alarm indicates if there
is a Loss of Signal of the input
of the module. <Condtype> LOSS_INPUT_SIGNAL
<Probcause> receiveFailure (41)
<Alarmtype> physicalViolation (9)
<Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 16 }
pmapcAlmEamAttHighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
EAM Attenuation High Alarm :This
OID indicates that the attenuation
of the EAM is higher than the alarm
threshold <Help> This alarm
indicates if the attenuation of
the EAM is too high <Condtype>
EAM_ATT_HIGH_ALA <Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 6 }
pmapcAlmEamAttLowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
EAM Attenuation Low Alarm :This
OID indicates that the attenuation
of the EAM is lower than the alarm
threshold <Help> This alarm
indicates if the attenuation of
the EAM is too low <Condtype> EAM_ATT_LOW_ALA
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 5 }
pmapcAlmPwrOutHighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Output High Alarm :This
OID indicates that Output power
of the transmit side is higher
than the alarm threshold <Help>
This alarm indicates if the transmit
power on the transmit side is
too high <Condtype> PWR_OUT_HIGH_ALA
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 4 }
pmapcAlmPwrOutLowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Output Low Alarm :This OID
indicates that Output power of
the transmit side is lower than
the alarm threshold <Help>
This alarm indicates if the transmit
power on the transmit side is
too low <Condtype> PWR_OUT_LOW_ALA
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 3 }
pmapcAlmPwrInHighAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input High Alarm :This OID
indicates that input power of the
transmit side is higher than the
alarm threshold <Help> This
alarm indicates if the received
power on the transmit side is
too high <Condtype> PWR_IN_HIGH_ALA
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 2 }
pmapcAlmPwrInLowAla OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input Low Alarm :This OID
indicates that input power of the
transmit side is lower than the
alarm threshold <Help> This
alarm indicates if the received
power on the transmit side is
too low <Condtype> PWR_IN_LOW_ALA
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmapcAlmmoduleAlarm 1 }
--- *****************************************************
--- LEAF for the moduleWarning article
--- *****************************************************
pmapcAlmmoduleWarning OBJECT IDENTIFIER ::= { pmapcAlmOtherNurg 65 }
pmapcAlmEamAttHighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
EAM Attenuation High Warning :EThis
OID indicates that the attenuation
of the EAM is higher than the warning
threshold <Help> This warning
indicates if the attenuation of
the EAM is too high <Condtype>
EAM_ATT_HIGH_WNG <Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleWarning 6 }
pmapcAlmEamAttLowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
EAM Attenuation Low Warning :This
OID indicates that the attenuation
of the EAM is lower than the warning
threshold <Help> This warning
indicates if the attenuation of
the EAM is too low <Condtype> EAM_ATT_LOW_WNG
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleWarning 5 }
pmapcAlmPwrOutHighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Output High Warning :This
OID indicates that Output power
of the transmit side is higher
than the warning threshold <Help>
This warning indicates if the
transmit power on the transmit
side is too high <Condtype> PWR_OUT_HIGH_WNG
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleWarning 4 }
pmapcAlmPwrOutLowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Output Low Warning :This
OID indicates that Output power
of the transmit side is lower than
the warning threshold <Help>
This warning indicates if the
transmit power on the transmit
side is too low <Condtype> PWR_OUT_LOW_WNG
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmoduleWarning 3 }
pmapcAlmPwrInHighWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input High Warning :This
OID indicates that input power
of the transmit side is higher
than the warning threshold <Help>
This warning indicates if the
received power on the transmit
side is too high <Condtype> PWR_IN_HIGH_WNG
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmapcAlmmoduleWarning 2 }
pmapcAlmPwrInLowWng OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input Low Warning :This
OID indicates that input power
of the transmit side is lower than
the warning threshold <Help>
This warning indicates if the
received power on the transmit
side is too low <Condtype> PWR_IN_LOW_WNG
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmapcAlmmoduleWarning 1 }
--- *****************************************************
--- LEAF for the modInitFailLevel2 article
--- *****************************************************
pmapcAlmmodInitFailLevel2 OBJECT IDENTIFIER ::= { pmapcAlmOtherUrg 70 }
pmapcAlmThreshConfFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Thresh_Conf_Fail : <Condtype>
THRESH_CONF_FAIL <Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmapcAlmmodInitFailLevel2 7 }
pmapcAlmCalibReadFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Calib_Read_Fail : <Condtype> CALIB_READ_FAIL
<Probcause> softwareError (47)
<Alarmtype> processingErrorAlarm
(4) <Polarity> (2)
"
::= { pmapcAlmmodInitFailLevel2 6 }
pmapcAlmInvReadFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
: <Condtype> INV_READ_FAIL <Probcause>
softwareError (47) <Alarmtype>
processingErrorAlarm (4) <Polarity>
(2)
"
::= { pmapcAlmmodInitFailLevel2 4 }
pmapcAlmConfReadFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Conf_Read_Fail : <Condtype> CONF_READ_FAIL
<Probcause> softwareError (47)
<Alarmtype> processingErrorAlarm
(4) <Polarity> (2)
"
::= { pmapcAlmmodInitFailLevel2 3 }
pmapcAlmResetHwInitFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Reset_HW_Init_Fail : <Condtype>
RESET_HW_INIT_FAIL <Probcause>
softwareError (47) <Alarmtype>
processingErrorAlarm (4) <Polarity>
(2)
"
::= { pmapcAlmmodInitFailLevel2 2 }
pmapcAlmRegReadFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Reg_Read_Fail : <Condtype> REG_READ_FAIL
<Probcause> softwareError (47)
<Alarmtype> processingErrorAlarm
(4) <Polarity> (2)
"
::= { pmapcAlmmodInitFailLevel2 1 }
--- *****************************************************
--- LEAF for the modInitFailLevel3 article
--- *****************************************************
pmapcAlmmodInitFailLevel3 OBJECT IDENTIFIER ::= { pmapcAlmOtherUrg 71 }
pmapcAlmOptIdentFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Opt_Ident_Fail : <Condtype> OPT_IDENT_FAIL
<Probcause> softwareError (47)
<Alarmtype> processingErrorAlarm
(4) <Polarity> (2)
"
::= { pmapcAlmmodInitFailLevel3 1 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONTROLS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synth0 article
--- *****************************************************
pmapcCtrlsynth0 OBJECT IDENTIFIER ::= { pmapcCtrlOther 0 }
pmapcCtrlConfClear OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Clear Configuration Tables :This
bit clears the configuration tables
from configuration in the flash.
<Help> This control restores
the default configuration of the
module
"
::= { pmapcCtrlsynth0 13 }
pmapcCtrlConfFlash OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Write Configuration Tables :This
bit saves the current configuration
of the module as configuration
in the flash. <Help> This
control saves the customer configuration
on the module
"
::= { pmapcCtrlsynth0 9 }
pmapcCtrlConfLoad OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Load Configuration Tables :When
set this enables loading from flash
configuration1 into the module.
"
::= { pmapcCtrlsynth0 1 }
--- *****************************************************
--- LEAF for the synth4 article
--- *****************************************************
pmapcCtrlsynth4 OBJECT IDENTIFIER ::= { pmapcCtrlOther 4 }
pmapcCtrlCorrelatOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Disable Alarm Correlation :This
OID disables the alarm correlation
in the PM.
"
::= { pmapcCtrlsynth4 2 }
pmapcCtrlCorrelatOn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Enable Alarm Correlation :This
OID enables the alarm correlation
in the PM.
"
::= { pmapcCtrlsynth4 1 }
--- *****************************************************
--- LEAF for the swMgnt article
--- *****************************************************
pmapcCtrlswMgnt OBJECT IDENTIFIER ::= { pmapcCtrlOther 5 }
pmapcCtrlWarmReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Warm Reset :This OID, when
set, causes a warm reset of the
Software. This reset is not traffic
affecting, and the configuration
of the Sofwtare remains unchanged.
<Help> This control initiates
a warm reset of the module.
"
::= { pmapcCtrlswMgnt 3 }
pmapcCtrlColdReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Cold Reset :This OID, when
set, causes a cold reset of the
Software. This reset is traffic
affecting, and the configuration
of Software is reloaded on start-up.
<Help> This control initiates
a cold reset of the module.
"
::= { pmapcCtrlswMgnt 2 }
--- *****************************************************
--- LEAF for the laser1Shutdown article
--- *****************************************************
pmapcCtrllaser1Shutdown OBJECT IDENTIFIER ::= { pmapcCtrlClient 16 }
pmapcCtrlLaser1Shutdown OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Laser Shutdown
:This OID shuts down the laser
of the Stuffing Wavelength 1
<Help> This control shuts down
the laser of the Stuffing Wavelength
1
"
::= { pmapcCtrllaser1Shutdown 1 }
--- *****************************************************
--- LEAF for the laser2Shutdown article
--- *****************************************************
pmapcCtrllaser2Shutdown OBJECT IDENTIFIER ::= { pmapcCtrlLine 17 }
pmapcCtrlLaser2Shutdown OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Laser Shutdown
:This OID shuts down the laser
of the Stuffing Wavelength 2
<Help> This control shuts down
the laser of the Stuffing Wavelength
2
"
::= { pmapcCtrllaser2Shutdown 1 }
--- *****************************************************
--- LEAF for the laser1Oos article
--- *****************************************************
pmapcCtrllaser1Oos OBJECT IDENTIFIER ::= { pmapcCtrlClient 18 }
pmapcCtrlLaser1OosMode OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Out Of Service
:This OID sets the Stuffing Wavelength
1 Out of Service <Help> This
controls defines the service state
of the Stuffing Wavelength 1
"
::= { pmapcCtrllaser1Oos 1 }
--- *****************************************************
--- LEAF for the laser2Oos article
--- *****************************************************
pmapcCtrllaser2Oos OBJECT IDENTIFIER ::= { pmapcCtrlLine 19 }
pmapcCtrlLaser2OosMode OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Out Of Service
:This OID sets the Stuffing Wavelength
2 Out of Service <Help> This
controls defines the service state
of the Stuffing Wavelength 2
"
::= { pmapcCtrllaser2Oos 1 }
--- *****************************************************
--- LEAF for the ledTest article
--- *****************************************************
pmapcCtrlledTest OBJECT IDENTIFIER ::= { pmapcCtrlOther 64 }
pmapcCtrlLedOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Leds Off :This OID switches off
all the Leds as a test feature.
<Help> This control initiates
a test leds turning all the LEDs
to OFF
"
::= { pmapcCtrlledTest 3 }
pmapcCtrlRedLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Red Leds Test :This OID switches
on all the red Leds as a test feature.
<Help> This control initiates
a test leds turning all the LEDs
to red
"
::= { pmapcCtrlledTest 2 }
pmapcCtrlGreenLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Green Leds Test :This OID switches
on all the green Leds as a test
feature. <Help> This control
initiates a test leds turning all
the LEDs to green
"
::= { pmapcCtrlledTest 1 }
--- *****************************************************
--- LEAF for the moduleOutputPwrSetting article
--- *****************************************************
pmapcCtrlmoduleOutputPwrSetting OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Module Output Power [-14 , +6]
:This OID sets the output power
of the module (AV=(Power/0.005)+32768)
(Unit = dBm) <Help> This control
defines the output power of the
module
"
::= { pmapcCtrlLine 65 }
--- *****************************************************
--- LEAF for the moduleInputPwrSetting article
--- *****************************************************
pmapcCtrlmoduleInputPwrSetting OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Module Input Power :This OID sets
the input power of the module (AV=(Power/0.005)+32768)
(Unit = dBm) <Help> This control
defines the input power of the
module
"
::= { pmapcCtrlLine 66 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- MEASURES
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the powerLas1 article
--- *****************************************************
pmapcMesrpowerLas1 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff, Wavelength 1 Power :This
OID gives the power value of the
Sutfing Wavelength 1 Laser (Power
= 10*log(AV)-40) (Unit = dBm)
<Help> This measure gives the
optical power of the Stuffing Wavelength
1 Laser
"
::= { pmapcMesrClient 16 }
--- *****************************************************
--- LEAF for the vthLas1 article
--- *****************************************************
pmapcMesrvthLas1 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 Temp. Reg.
Volt :This OID gives the Voltage
of the Temperature Regulator of
the Stuffing Wavelength 1 (Voltage
= AV/10000) (Unit = V) <Help>
This measure gives the Voltage
of the Temperature Regulator of
the Stuffing Wavelength 1
"
::= { pmapcMesrClient 17 }
--- *****************************************************
--- LEAF for the vtecLas1 article
--- *****************************************************
pmapcMesrvtecLas1 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 1 TEC Voltage
:This OID gives the Voltage of
the TEC of the Stuffing Wavelength
1 (Voltage = AV/10000) (Unit =
V) <Help> This measure gives
the Voltage of the TEC of the Stuffing
Wavelength 1
"
::= { pmapcMesrClient 18 }
--- *****************************************************
--- LEAF for the iLas1 article
--- *****************************************************
pmapcMesriLas1 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
:
"
::= { pmapcMesrClient 19 }
--- *****************************************************
--- LEAF for the powerLas2 article
--- *****************************************************
pmapcMesrpowerLas2 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff, Wavelength 2 Power :This
OID gives the power value of the
Sutfing Wavelength 2 Laser (Power
= 10*log(AV)-40) (Unit = dBm)
<Help> This measure gives the
optical power of the Stuffing Wavelength
2 Laser
"
::= { pmapcMesrLine 24 }
--- *****************************************************
--- LEAF for the vthLas2 article
--- *****************************************************
pmapcMesrvthLas2 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 Temp. Reg.
Volt :This OID gives the Voltage
of the Temperature Regulator of
the Stuffing Wavelength 2 (Voltage
= AV/10000) (Unit = V) <Help>
This measure gives the Voltage
of the Temperature Regulator of
the Stuffing Wavelength 2
"
::= { pmapcMesrLine 25 }
--- *****************************************************
--- LEAF for the vtecLas2 article
--- *****************************************************
pmapcMesrvtecLas2 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuff. Wavelength 2 TEC Voltage
:This OID gives the Voltage of
the TEC of the Stuffing Wavelength
2 (Voltage = AV/10000) (Unit =
V) <Help> This measure gives
the Voltage of the TEC of the Stuffing
Wavelength 2
"
::= { pmapcMesrLine 26 }
--- *****************************************************
--- LEAF for the iLas2 article
--- *****************************************************
pmapcMesriLas2 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
:
"
::= { pmapcMesrLine 27 }
--- *****************************************************
--- LEAF for the modulePowerIn article
--- *****************************************************
pmapcMesrmodulePowerIn OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Input Power :This OID gives
the input power of the module (Power=(AV-32768)*0.005)
(Unit = dBm) <Help> This measure
gives the input power of the module
"
::= { pmapcMesrOther 64 }
--- *****************************************************
--- LEAF for the moduleVPowerOut article
--- *****************************************************
pmapcMesrmoduleVPowerOut OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Output Power Voltage :This
OID gives the output power voltage
(Voltage = AV/10000) (Unit = V)
<Help> This measure gives the
output power voltage of the module
"
::= { pmapcMesrOther 65 }
--- *****************************************************
--- LEAF for the moduleEamAtt article
--- *****************************************************
pmapcMesrmoduleEamAtt OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Stuffing Lasers Attenuation :This
OID gives the attenuation level
applied on the stuffing lasers
in percent (0: not attenuation,
100: full attenuation) (Attenuation
= AV) (Unit = %) <Help> This
measure gives the attenuation
level applied on the stuffing
lasers in percent (0: not attenuation,
100: full attenuation)
"
::= { pmapcMesrOther 66 }
--- *****************************************************
--- LEAF for the moduleTemp article
--- *****************************************************
pmapcMesrmoduleTemp OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature :This OID gives
the module temperature (Temperature
= AV/256) (Unit = C) <Help> This
measure gives the module temperature
"
::= { pmapcMesrOther 67 }
--- *****************************************************
--- LEAF for the module33v article
--- *****************************************************
pmapcMesrmodule33v OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module 3.3 Voltage :This OID gives
the module 3V3 Voltage (Voltage
= AV/10000) (Unit = V) <Help>
This measure gives the module
3V3 Voltage
"
::= { pmapcMesrOther 68 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONFIG
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the table Group lsd
--- *****************************************************
pmapcCfgLsd OBJECT IDENTIFIER ::= { pmapcConfig 1 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmapctablecomaLsd OBJECT IDENTIFIER ::= { pmapcCfgLsd 1 }
--- *****************************************************
--- LEAF for the table Group startUp
--- *****************************************************
pmapcCfgStartUp OBJECT IDENTIFIER ::= { pmapcConfig 2 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmapctablecomaStartup OBJECT IDENTIFIER ::= { pmapcCfgStartUp 1 }
pmapcCfglaser1Oos OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default setting on laser 1 :This
register configures the default
service state on laser 1
"
::= { pmapctablecomaStartup 2 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmapctablecombStartup OBJECT IDENTIFIER ::= { pmapcCfgStartUp 2 }
pmapcCfglaser2Oos OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default setting on laser 2 :This
register configures the default
service state on laser 2
"
::= { pmapctablecombStartup 2 }
pmapcCfgmoduleOutputPwrSetting OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default setting on module output
power :This register configures
the default output power level
of the module
"
::= { pmapctablecombStartup 10 }
pmapcCfgmoduleInputPwrSetting OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default setting on module input
power :This register configures
the default input power level of
the module
"
::= { pmapctablecombStartup 11 }
--- *****************************************************
--- LEAF for the table Group labels
--- *****************************************************
pmapcCfgLabels OBJECT IDENTIFIER ::= { pmapcConfig 3 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmapcCfgLabelclientTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmapcCfgLabelclientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmapcCfgLabels 1 }
pmapcCfgLabelclientEntry OBJECT-TYPE
SYNTAX PmapcCfgLabelclientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the labels
table
"
INDEX { pmapcCfgLabelclientIndex }
::= { pmapcCfgLabelclientTable 1 }
PmapcCfgLabelclientEntry ::=
SEQUENCE {
pmapcCfgLabelclientIndex
INTEGER,
pmapcCfgLabelclientPortn
DisplayString
}
pmapcCfgLabelclientIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the labelclient
table
"
::= { pmapcCfgLabelclientEntry 1 }
pmapcCfgLabelclientPortn OBJECT-TYPE
SYNTAX DisplayString( SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default settings on the label
of the Ports :These registers
configures the default initialisation
settings of the labels of the ports.
"
::= { pmapcCfgLabelclientEntry 3 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmapcCfgLabellineTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmapcCfgLabellineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmapcCfgLabels 2 }
pmapcCfgLabellineEntry OBJECT-TYPE
SYNTAX PmapcCfgLabellineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the labels
table
"
INDEX { pmapcCfgLabellineIndex }
::= { pmapcCfgLabellineTable 1 }
PmapcCfgLabellineEntry ::=
SEQUENCE {
pmapcCfgLabellineIndex
INTEGER,
pmapcCfgLabellinePortn
DisplayString
}
pmapcCfgLabellineIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the labelline
table
"
::= { pmapcCfgLabellineEntry 1 }
pmapcCfgLabellinePortn OBJECT-TYPE
SYNTAX DisplayString( SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default settings on the label
of the lines :These registers
configures the default initialisation
settings of the labels of the lines.
"
::= { pmapcCfgLabellineEntry 3 }
pmapcCfgWriteConfiguration OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write configuration to module:This OID
writes the complete configuration to the module"
::= { pmapcConfig 257 }
--- *****************************************************
--- TRAP OBJECTS
--- *****************************************************
pmapctrapPortNumber OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last port which generates a trap"
::= { pmapctraps 2 }
pmapctrapLineNumber OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last Line which generates a trap"
::= { pmapctraps 3 }
pmapctrapBoardNumber OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last module which generates a trap"
::= { pmapctraps 4 }
--- *****************************************************
--- Las2 TRAPS
--- *****************************************************
pmapcLas2TrapNotUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas2MeasWng, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 2 Not Urgent ON"
--&ACTIONS { log, minor }
--&MATCH { pmapcAlmLas2MeasWng "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Warning appears on Stuffing Laser 2 of PMAPC in slot $2 ($A)"
DESCRIPTION "Not urgent Line default is activated"
::= { pmapctraps 30 }
pmapcLas2TrapNotUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas2MeasWng, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 2 Not Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PMAPC Stuffing Laser 2 Not Urgent ON"}
--&MATCH { pmapcAlmLas2MeasWng "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Warning disappears on Stuffing Laser 2 of PMAPC in slot $2 ($A)"
DESCRIPTION "Not urgent Line default disappeared"
::= { pmapctraps 31 }
pmapcLas2TrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas2MeasAlm, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 2 Urgent ON"
--&ACTIONS { log, major }
--&MATCH { pmapcAlmLas2MeasAlm "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Alarms appears on Stuffing Laser 2 of PMAPC in slot $2 ($A)"
DESCRIPTION "Urgent Line default is activated"
::= { pmapctraps 32 }
pmapcLas2TrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas2MeasAlm, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 2 Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PMAPC Stuffing Laser 2 Urgent ON"}
--&MATCH { pmapcAlmLas2MeasAlm "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Alarm disappears on Stuffing Laser 2 of PMAPC in slot $2 ($A)"
DESCRIPTION "Urgent Line default disappeared"
::= { pmapctraps 33 }
pmapcLas2TrapCritGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas2FailAcc , pmapcAlmLas2HwFailAcc, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 2 Fail ON"
--&ACTIONS { log, critical }
--&MATCH { pmapcAlmLas2FailAcc "on", pmapcAlmLas2HwFailAcc "*", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 2 Down on PMAPC in Slot $3 ($A)"
--&FILTNAME "PMAPC Stuffing Laser 2 HW Fail ON (Hidden)"
--&ACTIONS { info }
--&MATCH { pmapcAlmLas2FailAcc "*", pmapcAlmLas2HwFailAcc "on", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 2 Down on PMAPC in Slot $3 ($A)"
DESCRIPTION "Critical Line default is activated"
::= { pmapctraps 34 }
pmapcLas2TrapCritGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas2FailAcc , pmapcAlmLas2HwFailAcc, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 2 Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PMAPC Stuffing Laser 2 Fail ON" }
--&MATCH { pmapcAlmLas2FailAcc "on", pmapcAlmLas2HwFailAcc "*", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 2 Up on PMAPC in Slot $3 ($A)"
--&FILTNAME "PMAPC Stuffing Laser 2 HW Fail OFF (Hidden)"
--&ACTIONS { info }
--&MATCH { pmapcAlmLas2FailAcc "*", pmapcAlmLas2HwFailAcc "on", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 2 Up on PMAPC in Slot $3 ($A)"
DESCRIPTION "Critical Line default disappeared"
::= { pmapctraps 35 }
--- *****************************************************
--- Las1 TRAPS
--- *****************************************************
pmapcLas1TrapNotUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas1MeasWng, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 1 Not Urgent ON"
--&ACTIONS { log, minor }
--&MATCH { pmapcAlmLas1MeasWng "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Warning appears on Stuffing Laser 1 of PMAPC in slot $2 ($A)"
DESCRIPTION "Not urgent client default is activated"
::= { pmapctraps 40 }
pmapcLas1TrapNotUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas1MeasWng, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 1 Not Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PMAPC Stuffing Laser 1 Not Urgent ON"}
--&MATCH { pmapcAlmLas1MeasWng "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Warning disappears on Stuffing Laser 1 of PMAPC in slot $2 ($A)"
DESCRIPTION "Not urgent client default disappeared"
::= { pmapctraps 41 }
pmapcLas1TrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas1MeasAlm, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 1 Urgent ON"
--&ACTIONS { log, major }
--&MATCH { pmapcAlmLas1MeasAlm "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Alarms appears on Stuffing Laser 1 of PMAPC in slot $2 ($A)"
DESCRIPTION "Urgent client default is activated"
::= { pmapctraps 42 }
pmapcLas1TrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas1MeasAlm, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 1 Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PMAPC Stuffing Laser 1 Urgent ON"}
--&MATCH { pmapcAlmLas1MeasAlm "on", pmapctrapBoardNumber "$2"}
--&MESG "DDM Alarm disappears on Stuffing Laser 1 of PMAPC in slot $2 ($A)"
DESCRIPTION "Urgent client default disappeared"
::= { pmapctraps 43 }
pmapcLas1TrapCritGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas1FailAcc, pmapcAlmLas1HwFailAcc, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 1 Fail ON"
--&ACTIONS { log, critical }
--&MATCH { pmapcAlmLas1FailAcc "on", pmapcAlmLas1HwFailAcc "*", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 1 Down on PMAPC in Slot $3 ($A)"
--&FILTNAME "PMAPC Stuffing Laser 1 HW Fail ON (Hidden)"
--&ACTIONS { info }
--&MATCH { pmapcAlmLas1FailAcc "*", pmapcAlmLas1HwFailAcc "on", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 1 Down on PMAPC in Slot $3 ($A)"
DESCRIPTION "Critical client default is activated"
::= { pmapctraps 44 }
pmapcLas1TrapCritGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmLas1FailAcc, pmapcAlmLas1HwFailAcc, pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Stuffing Laser 1 Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PMAPC Stuffing Laser 1 Fail ON" }
--&MATCH { pmapcAlmLas1FailAcc "on", pmapcAlmLas1HwFailAcc "*", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 1 Up on PMAPC in Slot $3 ($A)"
--&FILTNAME "PMAPC Stuffing Laser 1 HW Fail OFF (Hidden)"
--&ACTIONS { info }
--&MATCH { pmapcAlmLas1FailAcc "*", pmapcAlmLas1HwFailAcc "on", pmapctrapBoardNumber "$3"}
--&MESG "Stuffing Laser 1 Up on PMAPC in Slot $3 ($A)"
DESCRIPTION "Critical client default disappeared"
::= { pmapctraps 45 }
--- *****************************************************
--- HW TRAPS
--- *****************************************************
pmapcPowerTrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmapcAlmDefFuseB, pmapcAlmDefFuseA , pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Fuse A Fail ON"
--&ACTIONS { log, major }
--&MATCH { pmapcAlmDefFuseB "*", pmapcAlmDefFuseA "on", pmapctrapBoardNumber "$3"}
--&MESG "Power Input A Fail on PMAPC in Slot $3 ($A)"
--&FILTNAME "PMAPC Fuse B Fail ON"
--&ACTIONS { log, major }
--&MATCH { pmapcAlmDefFuseB "on", pmapcAlmDefFuseA "*", pmapctrapBoardNumber "$3"}
--&MESG "Power Input B Fail on PMAPC in Slot $3 ($A)"
DESCRIPTION "Urgent power supply default is activated"
::= { pmapctraps 50 }
pmapcPowerTrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmapcAlmDefFuseB, pmapcAlmDefFuseA , pmapctrapBoardNumber}
STATUS current
--&FILTNAME "PMAPC Fuse A&B Fail OFF"
--&ACTIONS { log, normal}
--&CLEARS { "PMAPC Fuse A Fail ON", "PMAPC Fuse B Fail ON" }
--&MATCH { pmapcAlmDefFuseB "on", pmapcAlmDefFuseA "on", pmapctrapBoardNumber "$3"}
--&MESG "Power Inputs A and B Present on PMAPC in Slot $3 ($A)"
DESCRIPTION "Urgent power supply default disappeared"
::= { pmapctraps 51 }
END
View Git Blame Copy Permalink