1501 lines
52 KiB
Plaintext
1501 lines
52 KiB
Plaintext
PKTC-DECT-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Counter32
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue,
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
ifIndex FROM IF-MIB
|
|
pktcApplicationMibs
|
|
FROM CLAB-DEF-MIB;
|
|
|
|
pktcDectMib MODULE-IDENTITY
|
|
LAST-UPDATED "200909170000Z" -- September 17, 2009
|
|
ORGANIZATION "Cable Television Laboratories, Inc."
|
|
CONTACT-INFO
|
|
"Broadband Network Services
|
|
Cable Television Laboratories, Inc.
|
|
858 Coal Creek Circle,
|
|
Louisville, CO 80027, USA
|
|
Phone: +1 303-661-9100
|
|
Email: mibs@cablelabs.com
|
|
|
|
Acknowledgements:
|
|
Thomas Clack, Broadcom
|
|
Eugene Nechamkin, Broadcom
|
|
Josh Littlefield, Cisco
|
|
Jerry Mahler, Motorola
|
|
Eduardo Cardona, CableLabs"
|
|
DESCRIPTION
|
|
"This MIB module contains the PacketCable client
|
|
HD Voice management requirements."
|
|
REVISION "200909170000Z" -- September 17, 2009
|
|
DESCRIPTION
|
|
"Revised version includes ECN
|
|
DECT-PROV-N-09.0576-7
|
|
and published as part of PKT-SP-DECT-PROV-I02"
|
|
REVISION "200902260000Z" -- February 26, 2009
|
|
DESCRIPTION
|
|
"Initial version, published as part of the CableLabs
|
|
DECT Provisioning Specification PKT-SP-DECT-PROV-I01-090226
|
|
Copyright(c) 2009 Cable Television Laboratories, Inc.
|
|
All rights reserved."
|
|
::= { pktcApplicationMibs 4 }
|
|
|
|
-- Textual Conventions
|
|
|
|
PktcSpecVersion ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type represents the publication spec number of
|
|
the corresponding requirement being referenced.
|
|
PacketCable specifications have the notation
|
|
PKT-SP-<SPECNAME>I<##>-YYMMDD.
|
|
This value corresponds to the integer representation
|
|
of <##>."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification."
|
|
SYNTAX Unsigned32
|
|
|
|
PktcDectPPState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type describes the DECT PP MAC later state
|
|
or status indication.
|
|
The combination of states and status provide remote
|
|
debugging capabilities by knowing the actions that
|
|
determines e.g., the fallback to a specific state.
|
|
Some values may have a temporary duration and not
|
|
observable due their transient nature. Event logging
|
|
might be defined for such cases.
|
|
|
|
Below are the states definitions as defined by the DECT
|
|
standard
|
|
'activeLocked'
|
|
where the PP is synchronized to at least one RFP
|
|
transmission and has one or more connections in progress.
|
|
'idleLocked'
|
|
where the PP is synchronized to at least one RFP transmission.
|
|
It is able to make or receive connections, but has no
|
|
connections in progress.
|
|
'activeUnlocked'
|
|
where the PP is not synchronized to any RFP transmissions,
|
|
and is unable to make or receive connections.
|
|
The PP makes occasional attempts to detect a suitable RFP
|
|
and enter the 'IdleLocked' state.
|
|
'idleUnlocked'
|
|
The PP is not synchronized to any RFP and does not attempt
|
|
to detect RFPs.
|
|
|
|
Other values.
|
|
The state 'activeUnlocked' does not define any possible
|
|
reason why the PP has not progressed into a locked state.
|
|
Below are possible values to report:
|
|
'noFPInRange'
|
|
The PP could not find any FP in range.
|
|
'waitingEasyPairing'
|
|
The PP is waiting for easy pairing to be activated by the FP.
|
|
'easyPairingFailed'
|
|
The FP rejects the easyPairing access rights request.
|
|
'easyPINFailed'
|
|
The FP rejects the easyPIN access rights."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification."
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
idleUnlocked(2),
|
|
activeUnlocked(3),
|
|
idleLocked(4),
|
|
activeLocked(5),
|
|
noFPInRange(6),
|
|
waitingEasyPairing(7),
|
|
easyPairingFailed(8),
|
|
easyPINFailed(9)
|
|
}
|
|
|
|
-- Object Definitions
|
|
pktcDectNotifications OBJECT IDENTIFIER ::= { pktcDectMib 0 }
|
|
pktcDectObjects OBJECT IDENTIFIER ::= { pktcDectMib 1 }
|
|
pktcDectFP OBJECT IDENTIFIER ::= { pktcDectObjects 1 }
|
|
|
|
pktcDectFPMaxNumPP OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "PPs"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the maximum number of PPs
|
|
supported by the FP."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification."
|
|
::= { pktcDectFP 1 }
|
|
|
|
pktcDectFPMaxActivePP OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "PPs"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the maximum number of PPs that
|
|
can reach the state Idle_Unlocked simultaneously. The FP
|
|
ages out PPs as soon as the PP leaves the Idle_Unlocked
|
|
state to either Active_unlocked or unknown, allowing
|
|
another PP to attempt synchronization with the FP.
|
|
By Default this attribute reports the MaxNumPP
|
|
attribute value."
|
|
REFERENCE
|
|
"ETSI EN 300 175-3, Digital Enhanced Cordless
|
|
Telecommunications (DECT);Common Interface (CI); Part 3:
|
|
Medium Access Control (MAC) layer"
|
|
::= { pktcDectFP 2 }
|
|
|
|
pktcDectFPLockListCfg OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
listOfSupportedLists(0),
|
|
missedCallsList(1),
|
|
outgoingCallsLlist(2),
|
|
incomingAcceptedCallsList(3),
|
|
allCallsList(4),
|
|
contactList(5),
|
|
internalNamesList(6),
|
|
dectSsystemSettingsList(7),
|
|
lineSettingsList(8),
|
|
unused9(9),
|
|
unused10(10),
|
|
unused11(11),
|
|
unused12(12),
|
|
unused13(13),
|
|
unused14(14),
|
|
unused15(15),
|
|
unused16(16),
|
|
unused17(17),
|
|
unused18(18),
|
|
unused19(19),
|
|
unused20(20),
|
|
unused21(21),
|
|
unused22(22),
|
|
unused23(23),
|
|
unused24(24),
|
|
unused25(25),
|
|
unused26(26),
|
|
unused27(27),
|
|
unused28(28),
|
|
unused29(29),
|
|
unused30(30),
|
|
unused31(31)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the lock state of user
|
|
invocation of access list 'Edit entry', 'Save entry',
|
|
'Delete entry and 'Delete list' commands.
|
|
|
|
If a bit it set to '1' it indicates the corresponding
|
|
list is locked for the commands listed above.
|
|
|
|
If a bit is set to '0' the bit associated list is not
|
|
locked for the modification commands listed above.
|
|
|
|
A bit set to a non supported list is ignored and returned
|
|
as '0' on a subsequent read operation of this attribute.
|
|
|
|
Other list commands are always allowed.
|
|
The default value is the bit set to '1' for all lists that
|
|
the device supports as editable lists."
|
|
|
|
::= { pktcDectFP 3 }
|
|
|
|
pktcDectFPZeroEmissionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the status of the Zero Emission
|
|
mode.
|
|
the value 'true' indicates Zero Emission is enabled and the
|
|
FP will invoke the initiation of the no-emission mode if all
|
|
registered PPs are no-emission capable."
|
|
DEFVAL { true }
|
|
::= { pktcDectFP 4 }
|
|
|
|
pktcDectFPPairingType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the control of the PP
|
|
registration using PIN or easy registration procedures.
|
|
Setting this attribute to values containing ascii octets
|
|
not in the range [0-9] returns an error.
|
|
The value '0000' indicates the easy paring procedure is
|
|
used for registering new PPs. Otherwise, the PIN procedure
|
|
is used."
|
|
DEFVAL { "0000" }
|
|
::= {pktcDectFP 5 }
|
|
|
|
pktcDectFPEasyPairingActivate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the control of easy pairing
|
|
invocation by the FP.
|
|
|
|
The value 'false' indicates easy pairing is not active.
|
|
The value 'true' indicates the FP initiates the easy pairing
|
|
process.
|
|
After the first PP attempts pairing or a timer expires,
|
|
which ever occurs first, the easy pairing is disabled and
|
|
this attribute falls back to 'false'."
|
|
DEFVAL { true }
|
|
::= {pktcDectFP 6 }
|
|
|
|
pktcDectFPName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute corresponds to the FP name."
|
|
::= {pktcDectFP 7 }
|
|
|
|
pktcDectFPGeneralCapabilities OBJECT-TYPE
|
|
SYNTAX BITS { none(0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the General FP capabilities.
|
|
A bit set to '1' indicates support of the specific
|
|
profile feature, a bit set to '0' indicates not support
|
|
of the profile feature. Bits are numbered left to right
|
|
(MSB = 0). The possible values are encoded starting from
|
|
bit a12 to a47. Bit a12 represents bit 0 of this
|
|
enumeration, a47 is bit 35 in this attribute encoding."
|
|
::= {pktcDectFP 8 }
|
|
|
|
pktcDectFPExtendedCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
unused0(0),
|
|
unused1(1),
|
|
unused2(2),
|
|
unused3(3),
|
|
unused4(4),
|
|
unused5(5),
|
|
unused6(6),
|
|
unused7(7),
|
|
unused8(8),
|
|
unused9(9),
|
|
unused10(10),
|
|
unused11(11),
|
|
unused12(12),
|
|
unused13(13),
|
|
listAccess(14),
|
|
unused15(15),
|
|
unused16(16),
|
|
unused17(17),
|
|
unused18(18),
|
|
parallelCall(19),
|
|
unused20(20),
|
|
unused21(21),
|
|
unused22(22),
|
|
zeroEmission(23),
|
|
unused24(24),
|
|
unused25(25),
|
|
multipleLines(26),
|
|
multipleCalls(27),
|
|
unused28(28),
|
|
unused29(29),
|
|
unused30(30),
|
|
unused31(31)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the FP capabilities.
|
|
A bit set to '1' indicates support of the specific profile
|
|
feature, a bit set to '0' indicates not support of the
|
|
profile feature. Bits are numbered left to right (MSB = 0).
|
|
The possible values are encoded starting from bit a12 to
|
|
a47.
|
|
Bit a12 represents bit 0 of this enumeration, a47 is bit 35
|
|
in this attribute encoding (only the most relevant are
|
|
shown):
|
|
|
|
'parallelCall': Common parallel call procedure support
|
|
'listAccess': list Access Service support
|
|
'zeroEmission': support for Zero Emission
|
|
'multipleLines': multiple lines support
|
|
'multipleCalls': multiple calls support."
|
|
::= {pktcDectFP 9 }
|
|
|
|
pktcDectHDVoiceProfile OBJECT IDENTIFIER ::= { pktcDectObjects 2 }
|
|
|
|
pktcDectHDVoiceProfileBasicService OBJECT-TYPE
|
|
SYNTAX PktcSpecVersion
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the supported HD Voice
|
|
profile for basic service."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification."
|
|
::= { pktcDectHDVoiceProfile 1 }
|
|
|
|
pktcDectHDVoiceProfileNCS OBJECT-TYPE
|
|
SYNTAX PktcSpecVersion
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the supported HD voice
|
|
profile for NCS."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
::= { pktcDectHDVoiceProfile 2 }
|
|
|
|
pktcDectHDVoiceProfileSIP OBJECT-TYPE
|
|
SYNTAX PktcSpecVersion
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the supported HD Voice
|
|
profile for SIP."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
::= { pktcDectHDVoiceProfile 3 }
|
|
|
|
pktcDectCodec OBJECT IDENTIFIER ::= { pktcDectObjects 3 }
|
|
|
|
pktcDectCodecPrefList OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the codec selection in prefered
|
|
order from left to right. The codec list is comma separated
|
|
with no additional characters between code names.
|
|
When a user associated with an endpoint linked to this
|
|
FP has configured its own preferred codec list this
|
|
attribute is ignored."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
DEFVAL { "G722,PCMU,PCMA" }
|
|
::= { pktcDectCodec 1 }
|
|
|
|
pktcDectDTMF OBJECT IDENTIFIER ::= { pktcDectObjects 4 }
|
|
|
|
pktcDectDTMFToneDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the tone duration for DTMF
|
|
defined length events sent by a PP to the FP."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
DEFVAL { 100 }
|
|
::= { pktcDectDTMF 1 }
|
|
|
|
pktcDectBargeIn OBJECT IDENTIFIER ::= { pktcDectObjects 5 }
|
|
|
|
pktcDectBargeInEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the barge-in state of this
|
|
instance. The value 'true' indicates barge-in is enabled.
|
|
The value 'false' indicates barge-in is disabled."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
DEFVAL { true }
|
|
::= { pktcDectBargeIn 1 }
|
|
|
|
pktcDectServiceStatus OBJECT IDENTIFIER ::= { pktcDectObjects 6 }
|
|
|
|
pktcDectServiceStatusDeactivationDisplay OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the configured text to display
|
|
in the PP when the PacketCable Client service is
|
|
disconnected."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
DEFVAL { "Service Deactivated" }
|
|
::= { pktcDectServiceStatus 1 }
|
|
|
|
pktcDectServiceStatusConnectivityDisplay OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the configured text to display
|
|
in the PP when the PacketCable Client has no Network
|
|
(Service) Connectivity."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification"
|
|
DEFVAL { "Network Unavailable" }
|
|
::= { pktcDectServiceStatus 2 }
|
|
|
|
|
|
pktcDectAnalogAlarmCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectAnalogAlarmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the configuration of an end point
|
|
to support the Analog Alarm Configuration."
|
|
REFERENCE
|
|
"PacketCable DECT-HDV Specification."
|
|
::= {pktcDectObjects 7 }
|
|
|
|
pktcDectAnalogAlarmCfgEntry OBJECT-TYPE
|
|
SYNTAX PktcDectAnalogAlarmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectAnalogAlarmCfgTable.
|
|
When an endpoint instance is configured to enable the analog
|
|
Alarm Configuration, the largest POTS MDI identifier
|
|
(PktcMdiType = 'pots'') in the endpoint takes the role of
|
|
analog alarm port. Therefore, an endpoint is allowed to have
|
|
only one POTS configured as an analog Alarm port.
|
|
|
|
End points not instantiated in this object have no analog
|
|
Alarm configured (i.e., equivalent to
|
|
analogAlarmCfg.State = 'none')."
|
|
INDEX {
|
|
ifIndex
|
|
}
|
|
::= {pktcDectAnalogAlarmCfgTable 1 }
|
|
|
|
PktcDectAnalogAlarmCfgEntry ::= SEQUENCE {
|
|
pktcDectAnalogAlarmCfgState
|
|
INTEGER
|
|
|
|
}
|
|
|
|
pktcDectAnalogAlarmCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
preemptive(2),
|
|
simultanousCalls(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents alarm configuration type
|
|
assigned for this analog port. The possible values
|
|
are:
|
|
|
|
'none' indicates the end point has no analog alarm
|
|
Configuration
|
|
|
|
'preemptive' indicates the analog alarm is configured
|
|
in a preemptive mode of operation.
|
|
|
|
'SimultanousCalls' indicates the PacketCable client can
|
|
have a regular phone call and an alarm call simultaneously.
|
|
|
|
This type of analog alarm configuration is not applicable
|
|
to PacketCable clients that support NCS signaling
|
|
(i.e., E-MTAs) and a set to this attribute with this value
|
|
is rejected."
|
|
::= {pktcDectAnalogAlarmCfgEntry 1 }
|
|
|
|
pktcDectPPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectPPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the list of PPs and related
|
|
identifiers.
|
|
For debugging purposes this object lists more PPs than
|
|
the maximum number of PPs."
|
|
::= {pktcDectObjects 8 }
|
|
|
|
pktcDectPPEntry OBJECT-TYPE
|
|
SYNTAX PktcDectPPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectPPTable."
|
|
INDEX {
|
|
pktcDectPPId
|
|
}
|
|
::= {pktcDectPPTable 1 }
|
|
|
|
PktcDectPPEntry ::= SEQUENCE {
|
|
pktcDectPPId
|
|
Unsigned32,
|
|
pktcDectPPIPEI
|
|
OCTET STRING,
|
|
pktcDectPPTerminalID
|
|
Unsigned32,
|
|
pktcDectPPStatus
|
|
PktcDectPPState,
|
|
pktcDectPPRegCtrl
|
|
INTEGER
|
|
}
|
|
|
|
pktcDectPPId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This key represents the unique identifier of the PP.
|
|
The Id of PPs already registered corresponds to the
|
|
interface Index associated with the PP MDI.
|
|
For PPs not registered the FP selects an Id outside
|
|
the range of well known Interface Index values
|
|
defined for the device.
|
|
|
|
The FP lists only PPs that have previously paired or
|
|
attempted to pair within the FP during an FP initiated
|
|
pairing process. This avoid first time PPs from
|
|
neighbor areas to appear on a different subscriber FP."
|
|
::= {pktcDectPPEntry 1 }
|
|
|
|
pktcDectPPIPEI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the International Portable
|
|
Equipment Identifier of the device. Other than
|
|
residential/default handset identifiers are not
|
|
required."
|
|
::= {pktcDectPPEntry 2 }
|
|
|
|
pktcDectPPTerminalID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the Terminal Identifier the FP
|
|
assigns to the PP. For simple operation the FP may maintain
|
|
the same PP Terminal Identifier from the initial Locate
|
|
during pairing across device initialization."
|
|
::= {pktcDectPPEntry 3 }
|
|
|
|
pktcDectPPStatus OBJECT-TYPE
|
|
SYNTAX PktcDectPPState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the state of a PP as seen by
|
|
the FP based on last PP/FP interaction.
|
|
|
|
The FP may report only the values 'idleLocked' and
|
|
activeLocked' for registered PPs.
|
|
Unregistered PPs are reported as 'unknown' or the latest
|
|
failure occurred such as 'easyPINFailed',
|
|
'easyPairingFailed'.
|
|
|
|
Note that in no-emission mode the FP may not accurately
|
|
report the PP state."
|
|
::= {pktcDectPPEntry 4 }
|
|
|
|
pktcDectPPRegCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
register(1),
|
|
deregister(2),
|
|
remove(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute provides control of the PP registration
|
|
status.
|
|
|
|
The value 'deregister' directs the PP to initiate the
|
|
procedure to terminate PP access rights without deleting
|
|
the identity of the PP in this object (e.g., for
|
|
troubleshooting purposes).
|
|
|
|
The value 'register' initiates the registration process
|
|
either easy pairing or PIN registration depending on the
|
|
FP configuration (FP.PairingType). Subsequently,
|
|
the FP will register the PP for which the register
|
|
action was invoked. See the FP InitiateRegistration
|
|
to invoke the pairing of any PP.
|
|
|
|
The value 'remove' invokes the action to de-register the PP
|
|
(if so) and deletes the PP information of the FP."
|
|
::= {pktcDectPPEntry 5 }
|
|
|
|
|
|
pktcDectPPCapabilitiesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectPPCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the PP reported capabilities."
|
|
::= {pktcDectObjects 9 }
|
|
|
|
pktcDectPPCapabilitiesEntry OBJECT-TYPE
|
|
SYNTAX PktcDectPPCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectPPCapabilitiesTable."
|
|
INDEX {
|
|
pktcDectPPId
|
|
}
|
|
::= {pktcDectPPCapabilitiesTable 1 }
|
|
|
|
PktcDectPPCapabilitiesEntry ::= SEQUENCE {
|
|
pktcDectPPCapabilitiesDisplay
|
|
INTEGER,
|
|
pktcDectPPCapabilitiesTone
|
|
INTEGER,
|
|
pktcDectPPCapabilitiesEcho
|
|
INTEGER,
|
|
pktcDectPPCapabilitiesAmbientNoiseRejection
|
|
INTEGER,
|
|
pktcDectPPCapabilitiesAdaptiveVolumeCtrl
|
|
INTEGER,
|
|
pktcDectPPCapabilitiesSlotType
|
|
BITS,
|
|
pktcDectPPCapabilitiesStoredDisplayChars
|
|
Unsigned32,
|
|
pktcDectPPCapabilitiesDisplayLines
|
|
Unsigned32,
|
|
pktcDectPPCapabilitiesCharsPerDisplayLine
|
|
Unsigned32,
|
|
pktcDectPPCapabilitiesScrollBehavior
|
|
INTEGER,
|
|
pktcDectPPCapabilitiesProfile
|
|
BITS
|
|
}
|
|
|
|
pktcDectPPCapabilitiesDisplay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
na(0),
|
|
noDisplay(1),
|
|
numeric(2),
|
|
numericPlus(3),
|
|
alphanumeric(4),
|
|
fullDisplay(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP display capability.
|
|
The possible values are:
|
|
'na' : not applicable
|
|
'noDisplay': no display
|
|
'numeric': numeric characters (space, 0-9, *, #)
|
|
'numericPlus': extended numeric characters
|
|
(space, 0-9, *, #, a, b, c, d)
|
|
'alphanumeric': alphanumeric characters
|
|
(space, 0-9, *, #, a-z and A-Z)
|
|
'fullDisplay' : displayable characters up to 0x7F."
|
|
::= {pktcDectPPCapabilitiesEntry 1 }
|
|
|
|
pktcDectPPCapabilitiesTone OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
na(0),
|
|
notone(1),
|
|
dialTone(2),
|
|
e182(3),
|
|
dect(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP tone capability.
|
|
The possible values are:
|
|
'na': not applicable
|
|
'notone': no tone capability supported
|
|
'dialTone': dialtone supported
|
|
'e182': ITU-T E.182 tones supported
|
|
'dect': complete DECT tone set."
|
|
::= {pktcDectPPCapabilitiesEntry 2 }
|
|
|
|
pktcDectPPCapabilitiesEcho OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
na(0),
|
|
minTCL(1),
|
|
fullTCL(2),
|
|
voip(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP echo capability.
|
|
The possible values are:
|
|
'na': not applicable
|
|
'minTCL': > 34 dB
|
|
'fullTCL': > 46 dB
|
|
'voip' : > 55 dB."
|
|
::= {pktcDectPPCapabilitiesEntry 3 }
|
|
|
|
pktcDectPPCapabilitiesAmbientNoiseRejection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
na(0),
|
|
noSupport(1),
|
|
support(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP ambient noise rejection
|
|
capability. The possible values are:
|
|
'na': not applicable
|
|
'noSupport': no noise rejection
|
|
'support': noise rejection provided."
|
|
::= {pktcDectPPCapabilitiesEntry 4 }
|
|
|
|
pktcDectPPCapabilitiesAdaptiveVolumeCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
na(0),
|
|
noSupported(1),
|
|
used(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP adaptive volume
|
|
control capability. The possible values are:
|
|
'na': not applicable
|
|
'noSupported': no adaptive volume control
|
|
'used': supported and in use
|
|
'disabled': supported not in use."
|
|
::= {pktcDectPPCapabilitiesEntry 5 }
|
|
|
|
pktcDectPPCapabilitiesSlotType OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
unused0(0),
|
|
unused1(1),
|
|
unused2(2),
|
|
doubleSlot(3),
|
|
fullSlot(4),
|
|
unused5(5),
|
|
unused6(6),
|
|
halfSlot(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP slot type
|
|
capabilities.
|
|
A bit set to '1' indicates support of the
|
|
slot type,
|
|
A bit set to '0' indicates no support of
|
|
the slot type. Bits are numbered left to
|
|
right (MSB = 0). The possible values are:
|
|
'halfSlot': half slot, j = 0
|
|
'fullSlot': full slot
|
|
'doubleSlot': double slot"
|
|
::= {pktcDectPPCapabilitiesEntry 6 }
|
|
|
|
pktcDectPPCapabilitiesStoredDisplayChars OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..16363)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP number of stored
|
|
display characters."
|
|
::= {pktcDectPPCapabilitiesEntry 7 }
|
|
|
|
pktcDectPPCapabilitiesDisplayLines OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the number of lines in the
|
|
PP display."
|
|
::= {pktcDectPPCapabilitiesEntry 8 }
|
|
|
|
pktcDectPPCapabilitiesCharsPerDisplayLine OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP number of characters
|
|
per line in the display."
|
|
::= {pktcDectPPCapabilitiesEntry 9 }
|
|
|
|
pktcDectPPCapabilitiesScrollBehavior OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
na(0),
|
|
type1(1),
|
|
type(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP scroll behavior
|
|
capability. The possible values are:
|
|
'na': not applicable, specified
|
|
'type1': type 1
|
|
'type2': type 2."
|
|
::= {pktcDectPPCapabilitiesEntry 10 }
|
|
|
|
pktcDectPPCapabilitiesProfile OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
unused0(0),
|
|
unused1(1),
|
|
unused2(2),
|
|
unused3(3),
|
|
unused4(4),
|
|
gapSupport(5),
|
|
unused6(6),
|
|
unused7(7),
|
|
unused8(8),
|
|
unused9(9),
|
|
unused10(10),
|
|
unused11(11),
|
|
unused12(12),
|
|
unused13(13),
|
|
unused14(14),
|
|
unused15(15),
|
|
unused16(16),
|
|
unused17(17),
|
|
unused18(18),
|
|
unused19(19),
|
|
unused20(20),
|
|
unused21(21),
|
|
unused22(22),
|
|
unused23(23),
|
|
unused24(24),
|
|
unused25(25),
|
|
unused26(26),
|
|
unused27(27),
|
|
unused28(28),
|
|
unused29(29),
|
|
unused30(30),
|
|
unused31(31),
|
|
unused32(32),
|
|
unused33(33),
|
|
unused34(34),
|
|
unused35(35),
|
|
unused36(36),
|
|
unused37(37),
|
|
unused38(38),
|
|
unused39(39),
|
|
unused40(40),
|
|
zeroEmissionSupport(41),
|
|
unused42(42),
|
|
unused43(43),
|
|
unused44(44),
|
|
unused45(45),
|
|
unused46(46),
|
|
unused47(47),
|
|
unused48(48),
|
|
unused49(49),
|
|
multipleLlines(50),
|
|
parallelCall(51),
|
|
callIdentification(52),
|
|
wideband(53),
|
|
part3(54),
|
|
unused55(55),
|
|
unused56(56),
|
|
unused57(57),
|
|
unused58(58),
|
|
unused59(59),
|
|
unused60(60),
|
|
unused61(61),
|
|
unused62(62),
|
|
unused63(63),
|
|
unused64(64)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the PP profile feature
|
|
capabilities.
|
|
A bit set to '1' indicates support of the specific
|
|
profile feature, a bit set to '0' indicates not support
|
|
of the profile feature. Bits are numbered left to right
|
|
(MSB = 0).
|
|
The possible values are (only the most relevant are shown):
|
|
'gapSupport'': GAP profile support
|
|
'zeroEmission': Zero Emission support
|
|
'multipleLlines': multiple lines
|
|
'parallelCall': Common parallel call procedures
|
|
'callIdentification': Call Identification support
|
|
'wideband': Wideband support
|
|
'part3' : Extended wideband speech services support"
|
|
::= {pktcDectPPCapabilitiesEntry 11 }
|
|
|
|
pktcDectListAccessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectListAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the list of lists stored in the FP."
|
|
::= {pktcDectObjects 10 }
|
|
|
|
pktcDectListAccessEntry OBJECT-TYPE
|
|
SYNTAX PktcDectListAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectListAccessTable."
|
|
INDEX {
|
|
pktcDectListAccessIndex
|
|
}
|
|
::= {pktcDectListAccessTable 1 }
|
|
|
|
PktcDectListAccessEntry ::= SEQUENCE {
|
|
pktcDectListAccessIndex
|
|
Unsigned32,
|
|
pktcDectListAccesslistID
|
|
Unsigned32,
|
|
pktcDectListAccessDescr
|
|
SnmpAdminString
|
|
}
|
|
|
|
pktcDectListAccessIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Key represents the unique identifier of the list element."
|
|
::= {pktcDectListAccessEntry 1 }
|
|
|
|
pktcDectListAccesslistID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the ID of the supported list."
|
|
::= {pktcDectListAccessEntry 2 }
|
|
|
|
pktcDectListAccessDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the name of the list.
|
|
For standard list this corresponds to the exact name as the
|
|
list is referred to in the specification.
|
|
Vendor specific list may include name and references to
|
|
documentation (e.g., URNs)."
|
|
::= {pktcDectListAccessEntry 3 }
|
|
|
|
pktcDectInternalNamesListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectInternalNamesListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the list of registered PPs"
|
|
::= {pktcDectObjects 11 }
|
|
|
|
pktcDectInternalNamesListEntry OBJECT-TYPE
|
|
SYNTAX PktcDectInternalNamesListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectInternalNamesListTable."
|
|
INDEX {
|
|
pktcDectInternalNamesListIndex
|
|
}
|
|
::= {pktcDectInternalNamesListTable 1 }
|
|
|
|
PktcDectInternalNamesListEntry ::= SEQUENCE {
|
|
pktcDectInternalNamesListIndex
|
|
Unsigned32,
|
|
pktcDectInternalNamesListNumber
|
|
Unsigned32,
|
|
pktcDectInternalNamesListName
|
|
SnmpAdminString
|
|
}
|
|
|
|
pktcDectInternalNamesListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Key represents the unique identifier of the list element."
|
|
::= {pktcDectInternalNamesListEntry 1 }
|
|
|
|
pktcDectInternalNamesListNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the terminal identity number."
|
|
::= {pktcDectInternalNamesListEntry 2 }
|
|
|
|
pktcDectInternalNamesListName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the name of the internal party."
|
|
::= {pktcDectInternalNamesListEntry 3 }
|
|
|
|
pktcDectLineSettingsListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectLineSettingsListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Information pertaining to the list.
|
|
Operator settings to this line are performed via the NSL object.
|
|
Primarily association of PPs to the phone line.
|
|
A PacketCable device allows the user to modify any line
|
|
parameter via PP access list commands with the exception of the
|
|
'Dialing Prefix' field."
|
|
|
|
::= {pktcDectObjects 12 }
|
|
|
|
pktcDectLineSettingsListEntry OBJECT-TYPE
|
|
SYNTAX PktcDectLineSettingsListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectLineSettingsListTable."
|
|
INDEX {
|
|
pktcDectLineSettingsListIndex
|
|
}
|
|
::= {pktcDectLineSettingsListTable 1 }
|
|
|
|
PktcDectLineSettingsListEntry ::= SEQUENCE {
|
|
pktcDectLineSettingsListIndex
|
|
Unsigned32,
|
|
pktcDectLineSettingsListLineId
|
|
Unsigned32,
|
|
pktcDectLineSettingsListLineName
|
|
SnmpAdminString,
|
|
pktcDectLineSettingsListAttachedHandsets
|
|
SnmpAdminString,
|
|
pktcDectLineSettingsListDialingPrefix
|
|
SnmpAdminString,
|
|
pktcDectLineSettingsListFPMelody
|
|
Unsigned32,
|
|
pktcDectLineSettingsListFPVolume
|
|
Unsigned32,
|
|
pktcDectLineSettingsListBlockedNB
|
|
TruthValue,
|
|
pktcDectLineSettingsListMultipleCalls
|
|
TruthValue,
|
|
pktcDectLineSettingsListIntrusionCall
|
|
TruthValue
|
|
}
|
|
|
|
pktcDectLineSettingsListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..127)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Key represents the unique identifier of the list
|
|
element."
|
|
::= {pktcDectLineSettingsListEntry 1 }
|
|
|
|
pktcDectLineSettingsListLineId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the line identifier."
|
|
::= {pktcDectLineSettingsListEntry 2 }
|
|
|
|
pktcDectLineSettingsListLineName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the name of the line."
|
|
::= {pktcDectLineSettingsListEntry 3 }
|
|
|
|
pktcDectLineSettingsListAttachedHandsets OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the list of registered handsets
|
|
which are attached to the line.
|
|
This attribute is formatted as a string where each octet
|
|
represents the 'Terminal Identifier' of the handset.
|
|
Note that the over the air 'Line settings list' defines
|
|
the 'Attached handsets' as a sequence of bits, each
|
|
representing a 'Terminal Id' handset."
|
|
::= {pktcDectLineSettingsListEntry 4 }
|
|
|
|
pktcDectLineSettingsListDialingPrefix OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents a prefix to add to called
|
|
party numbers for calls placed on the line."
|
|
::= {pktcDectLineSettingsListEntry 5 }
|
|
|
|
pktcDectLineSettingsListFPMelody OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the melody of the FP linked to
|
|
this line."
|
|
::= {pktcDectLineSettingsListEntry 6 }
|
|
|
|
pktcDectLineSettingsListFPVolume OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the melody volume of the FP
|
|
linked to this line."
|
|
::= {pktcDectLineSettingsListEntry 7 }
|
|
|
|
pktcDectLineSettingsListBlockedNB OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents forbidden called party numbers
|
|
on the line."
|
|
::= {pktcDectLineSettingsListEntry 8 }
|
|
|
|
pktcDectLineSettingsListMultipleCalls OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the current mode of the line:
|
|
The value 'true' indicates support for multiple call mode
|
|
The value 'false' indicates support for single call mode.
|
|
For PacketCable Client devices supporting only single call
|
|
mode this value always use the value 'false'."
|
|
::= {pktcDectLineSettingsListEntry 9 }
|
|
|
|
pktcDectLineSettingsListIntrusionCall OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the call intrusion mode for
|
|
the line.
|
|
The value 'true' indicates the line has 'call intrusion'
|
|
enabled. Otherwise the value 'false' is reported.
|
|
|
|
The PacketCable Client device should always use the
|
|
configured BargedIn.Enabled attribute value as the highest
|
|
possible value. It means if BargeIn.Enabled is set to 'false',
|
|
the user can't modify the call intrusion to 'true' via list
|
|
access commands. In the contrary, if BargeIn.Enabled is set to
|
|
'true' the user could set this attribute to 'false' via 'line
|
|
settings list' commands."
|
|
::= {pktcDectLineSettingsListEntry 10 }
|
|
|
|
pktcDectPerformanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectPerformanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the performance statistics of each PP.
|
|
When Zero Emission is enabled this object store statistics on
|
|
a per call basis.
|
|
When Zero Emission is disabled, this object may contains a
|
|
single instance per PP (Terminal ID)
|
|
referent to all the messages activity in the upstream direction
|
|
(PP to FP) or maintain per call statistics."
|
|
::= {pktcDectObjects 13 }
|
|
|
|
pktcDectPerformanceEntry OBJECT-TYPE
|
|
SYNTAX PktcDectPerformanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectPerformanceTable."
|
|
INDEX {
|
|
ifIndex
|
|
}
|
|
::= {pktcDectPerformanceTable 1 }
|
|
|
|
PktcDectPerformanceEntry ::= SEQUENCE {
|
|
pktcDectPerformanceRecordNum
|
|
Unsigned32,
|
|
pktcDectPerformanceHandovers
|
|
Counter32,
|
|
pktcDectPerformanceRTDelay
|
|
Unsigned32,
|
|
pktcDectPerformanceSyncFailures
|
|
Counter32,
|
|
pktcDectPerformanceControlFieldErrs
|
|
Counter32,
|
|
pktcDectPerformancePayloadErrs
|
|
Counter32,
|
|
pktcDectPerformanceSlidingCollisions
|
|
Counter32,
|
|
pktcDectPerformanceLinkErrsQbit
|
|
Counter32
|
|
}
|
|
|
|
pktcDectPerformanceRecordNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This key represents the identifier of the logged
|
|
statistics of a previous call. When Zero Emission is enabled
|
|
the FP maintains an incrementing log information and
|
|
deletes the oldest log instance when reaching the maximum
|
|
number of entries.
|
|
When Zero Emission is disabled this object creates a single
|
|
instance with RecordNum = 0 and collects continuously the
|
|
data associated with the object attributes."
|
|
::= {pktcDectPerformanceEntry 1 }
|
|
|
|
pktcDectPerformanceHandovers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates how many channel handovers the PP
|
|
has realized since the first activity related to this
|
|
logged call."
|
|
::= {pktcDectPerformanceEntry 2 }
|
|
|
|
pktcDectPerformanceRTDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the round trip delay calculated
|
|
by the FP.
|
|
The FP measures the RoundTrip Delay at the beginning of
|
|
the call."
|
|
::= {pktcDectPerformanceEntry 3 }
|
|
|
|
pktcDectPerformanceSyncFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the number of synchronization
|
|
failures that have occurred during the current call."
|
|
::= {pktcDectPerformanceEntry 4 }
|
|
|
|
pktcDectPerformanceControlFieldErrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the number of Control field errors
|
|
encountered during this time period"
|
|
::= {pktcDectPerformanceEntry 5 }
|
|
|
|
pktcDectPerformancePayloadErrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the number of CRC errors
|
|
accumulated during this period of time."
|
|
::= {pktcDectPerformanceEntry 6 }
|
|
|
|
pktcDectPerformanceSlidingCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the number of sliding collisions
|
|
detected during this period of time."
|
|
::= {pktcDectPerformanceEntry 7 }
|
|
|
|
pktcDectPerformanceLinkErrsQbit OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"this attribute indicates the number of link errors being
|
|
signaled with the Q-bit during this period of time."
|
|
::= {pktcDectPerformanceEntry 8 }
|
|
|
|
pktcDectStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcDectStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the PP status and related
|
|
connectivity information"
|
|
::= {pktcDectObjects 14 }
|
|
|
|
pktcDectStatusEntry OBJECT-TYPE
|
|
SYNTAX PktcDectStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Conceptual row of pktcDectStatusTable."
|
|
INDEX {
|
|
ifIndex
|
|
}
|
|
::= {pktcDectStatusTable 1 }
|
|
|
|
PktcDectStatusEntry ::= SEQUENCE {
|
|
pktcDectStatusLastLocate
|
|
DateAndTime,
|
|
pktcDectStatusNumLocateMsgs
|
|
Counter32,
|
|
pktcDectStatusNumConnectionFailures
|
|
Counter32,
|
|
pktcDectStatusNumActivitySuccess
|
|
Counter32,
|
|
pktcDectStatusLastActivityFailure
|
|
DateAndTime,
|
|
pktcDectStatusRSSI
|
|
Unsigned32
|
|
}
|
|
|
|
pktcDectStatusLastLocate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the time when the last Locate
|
|
message was sent by the PP to the FP."
|
|
::= {pktcDectStatusEntry 1 }
|
|
|
|
pktcDectStatusNumLocateMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the number of times the PP
|
|
has subscribed since last FP reboot."
|
|
::= {pktcDectStatusEntry 2 }
|
|
|
|
pktcDectStatusNumConnectionFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the number of times the PP
|
|
has failed connections with the FP since last FP
|
|
reinitialization."
|
|
::= {pktcDectStatusEntry 3 }
|
|
|
|
pktcDectStatusNumActivitySuccess OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the number of times the PP
|
|
has initiated any activity successfully since
|
|
last time the FP reinitializes."
|
|
::= {pktcDectStatusEntry 4 }
|
|
|
|
pktcDectStatusLastActivityFailure OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the time where the last PP
|
|
initiated activity and being rejected by the FP."
|
|
::= {pktcDectStatusEntry 5 }
|
|
|
|
pktcDectStatusRSSI OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute represents the instantaneous
|
|
Received Signal Strength from the PP."
|
|
::= {pktcDectStatusEntry 6 }
|
|
|
|
|
|
-- Conformance Definitions
|
|
pktcDectMibConformance OBJECT IDENTIFIER ::= { pktcDectMib 2 }
|
|
pktcDectMibCompliances OBJECT IDENTIFIER ::= { pktcDectMibConformance 1 }
|
|
pktcDectMibGroups OBJECT IDENTIFIER ::= { pktcDectMibConformance 2 }
|
|
|
|
pktcDectCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the HD Voice PacketCable
|
|
Client device."
|
|
MODULE -- this MODULE
|
|
MANDATORY-GROUPS {
|
|
pktcDectGroup
|
|
}
|
|
::= { pktcDectMibCompliances 1 }
|
|
|
|
pktcDectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pktcDectFPMaxNumPP,
|
|
pktcDectFPMaxActivePP,
|
|
pktcDectFPLockListCfg,
|
|
pktcDectFPZeroEmissionEnabled,
|
|
pktcDectFPPairingType,
|
|
pktcDectFPEasyPairingActivate,
|
|
pktcDectFPName,
|
|
pktcDectFPGeneralCapabilities,
|
|
pktcDectFPExtendedCapabilities,
|
|
pktcDectHDVoiceProfileBasicService,
|
|
pktcDectHDVoiceProfileNCS,
|
|
pktcDectHDVoiceProfileSIP,
|
|
pktcDectCodecPrefList,
|
|
pktcDectDTMFToneDuration,
|
|
pktcDectBargeInEnabled,
|
|
pktcDectServiceStatusDeactivationDisplay,
|
|
pktcDectServiceStatusConnectivityDisplay,
|
|
pktcDectAnalogAlarmCfgState,
|
|
pktcDectListAccesslistID,
|
|
pktcDectListAccessDescr,
|
|
pktcDectInternalNamesListNumber,
|
|
pktcDectInternalNamesListName,
|
|
pktcDectLineSettingsListLineId,
|
|
pktcDectLineSettingsListLineName,
|
|
pktcDectLineSettingsListAttachedHandsets,
|
|
pktcDectLineSettingsListDialingPrefix,
|
|
pktcDectLineSettingsListFPMelody,
|
|
pktcDectLineSettingsListFPVolume,
|
|
pktcDectLineSettingsListBlockedNB,
|
|
pktcDectLineSettingsListMultipleCalls,
|
|
pktcDectLineSettingsListIntrusionCall,
|
|
pktcDectPerformanceRecordNum,
|
|
pktcDectPerformanceHandovers,
|
|
pktcDectPerformanceRTDelay,
|
|
pktcDectPerformanceSyncFailures,
|
|
pktcDectPerformanceControlFieldErrs,
|
|
pktcDectPerformancePayloadErrs,
|
|
pktcDectPerformanceSlidingCollisions,
|
|
pktcDectPerformanceLinkErrsQbit,
|
|
pktcDectStatusLastLocate,
|
|
pktcDectStatusNumLocateMsgs,
|
|
pktcDectStatusNumConnectionFailures,
|
|
pktcDectStatusNumActivitySuccess,
|
|
pktcDectStatusLastActivityFailure,
|
|
pktcDectStatusRSSI,
|
|
pktcDectPPIPEI,
|
|
pktcDectPPTerminalID,
|
|
pktcDectPPStatus,
|
|
pktcDectPPRegCtrl,
|
|
pktcDectPPCapabilitiesDisplay,
|
|
pktcDectPPCapabilitiesTone,
|
|
pktcDectPPCapabilitiesEcho,
|
|
pktcDectPPCapabilitiesAmbientNoiseRejection,
|
|
pktcDectPPCapabilitiesAdaptiveVolumeCtrl,
|
|
pktcDectPPCapabilitiesSlotType,
|
|
pktcDectPPCapabilitiesStoredDisplayChars,
|
|
pktcDectPPCapabilitiesDisplayLines,
|
|
pktcDectPPCapabilitiesCharsPerDisplayLine,
|
|
pktcDectPPCapabilitiesScrollBehavior,
|
|
pktcDectPPCapabilitiesProfile
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects implemented in the HD Voice PacketCable
|
|
Client device."
|
|
::= { pktcDectMibGroups 1 }
|
|
END
|
|
|