WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rfc/IEEE8021-MIRP-MIB

325 lines
11 KiB
Plaintext
Raw Permalink Blame History

IEEE8021-MIRP-MIB
DEFINITIONS ::= BEGIN
-- ******************************************************************
-- IEEE P802.1Q(TM) Multiple I-SID Registration Protocol MIB
-- ******************************************************************
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI -- [RFC2578]
TruthValue
FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580]
systemGroup
FROM SNMPv2-MIB -- [RFC3418]
VlanIdOrNone
FROM Q-BRIDGE-MIB -- [RFC4363]
IEEE8021BridgePortNumberOrZero
FROM IEEE8021-TC-MIB -- IEEE Std 802.1ap
ieee8021PbbBackboneEdgeBridgeObjects
FROM IEEE8021-PBB-MIB -- IEEE Std 802.1ap
ieee8021BridgeBasePortEntry
FROM IEEE8021-BRIDGE-MIB -- IEEE Std 802.1ap
;
ieee8021MirpMib
MODULE-IDENTITY
LAST-UPDATED "201806280000Z" -- June 28, 2018
ORGANIZATION "IEEE 802.1 Working Group"
CONTACT-INFO
"WG-URL: http://www.ieee802.org/1/
WG-EMail: stds-802-1-L@ieee.org
Contact: IEEE 802.1 Working Group Chair
Postal: IEEE Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
E-mail: stds-802-1-L@ieee.org
"
DESCRIPTION
"Multiple I-SID Registration Protocol module for managing
IEEE 802.1Qbe
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
"
REVISION "201806280000Z" -- June 28, 2018
DESCRIPTION
"Published as part of IEEE Std 802.1Q-2018.
Cross references updated and corrected."
REVISION "201412150000Z" -- December 15, 2014
DESCRIPTION
"Published as part of IEEE Std 802.1Q 2014 revision.
Cross references updated and corrected.
Objects renamed and attached to the proper MIB arc.
NOTE THAT the original MIB version incorrectly
attached new objects to the CN MIB arc. The old objects
and object names SHOULD NOT be used. The old names/objects
concerned are:
ieee8021MirpMIBObjects
ieee8021MirpConformance
ieee8021MirpPortTable
ieee8021MirpCompliances
ieee8021MirpGroups"
REVISION "201104050000Z" -- (YYYYMMDDHHMM Zulu=GMT)
DESCRIPTION
"Included in IEEE Std 802.1Qbe-2011
Copyright (C) IEEE Std 802.1."
::= { iso(1) org(3) ieee(111)
standards-association-numbers-series-standards (2)
lan-man-stds (802) ieee802dot1 (1) ieee802dot1mibs (1) 23 }
ieee8021MirpV2MIBObjects
OBJECT IDENTIFIER ::= { ieee8021MirpMib 1 }
ieee8021MirpV2Conformance
OBJECT IDENTIFIER ::= { ieee8021MirpMib 2 }
-- =============================================================
-- MIRP augmentation of the Generic Bridge Port Table
-- =============================================================
ieee8021MirpV2PortTable
OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021MirpV2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains controls for the Multiple I-SID
Registration Protocol (MIRP) state machines for all of the Ports
of a Bridge."
REFERENCE "12.9.2"
::= { ieee8021MirpV2MIBObjects 1 }
ieee8021MirpV2PortEntry
OBJECT-TYPE
SYNTAX Ieee8021MirpV2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the MIRP Participant controls for one Port."
AUGMENTS { ieee8021BridgeBasePortEntry }
::= { ieee8021MirpV2PortTable 1 }
Ieee8021MirpV2PortEntry
::= SEQUENCE {
ieee8021MirpV2PortEnabledStatus TruthValue
}
ieee8021MirpV2PortEnabledStatus
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of MIRP operation on this port. The value
true(1) indicates that MIRP is enabled on this port,
as long as ieee8021PbbMirpEnableStatus is also enabled
for this component. When false(2) but
ieee8021PbbMirpEnableStatus is still
enabled for the device, MIRP is disabled on this port.
If MIRP is enabled on a VIP, then the MIRP Participant is
enabled on that VIP's PIP. If MIRP is enabled on none of the
VIPs on a PIP, then the MIRP Participant on the PIP is
diabled; any MIRP packets received will be silently discarded,
and no MIRP registrations will be propagated from the PIP. A
transition from all VIPs on a PIP false(2) to at least one VIP
on the PIP true(1) will cause a reset of all MIRP state
machines on this PIP.
If MIRP is enabled on any port not a VIP, then the MIRP
Participant is enabled on that port. If MIRP is
disabled on a non-VIP port, then MIRP packets received will be
silently discarded, and no MIRP registrations will be
propagated from the port. A transition from false(2) to
true(1) will cause a reset of all MIRP state machines on a
non-VIP port.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.7.7.1, 12.7.7.2, 39.2.1.11"
DEFVAL { true }
::= { ieee8021MirpV2PortEntry 1 }
-- =============================================================
-- MIRP augmentation of BEB subtree
-- =============================================================
ieee8021PbbMirpEnableStatus
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for
MIRP. The value true(1) indicates that MIRP should be enabled
on this component, on all ports for which it has not been
specifically disabled. When false(2), MIRP is disabled on all
ports. This object affects all MIRP Applicant and Registrar
state machines. A transition from false(2) to true(1) will
cause a reset of all MIRP state machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.16.1.1.3:i, 12.16.1.2.2:b"
DEFVAL { false }
::= { ieee8021PbbBackboneEdgeBridgeObjects 7 }
ieee8021PbbMirpBvid
OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The B-VID to which received MIRPDUs are to be assigned, or 0,
if they are to be sent on the CBP PVID."
REFERENCE "12.14.7.7.2 j), 12.14.7.7.2 c)"
DEFVAL { 0 }
::= { ieee8021PbbBackboneEdgeBridgeObjects 8 }
ieee8021PbbMirpDestSelector
OBJECT-TYPE
SYNTAX INTEGER {
cbpMirpGroup (1),
cbpMirpVlan (2),
cbpMirpTable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An enumerated value specifying what destination_address and
vlan_identifier are to be used when the MIRP Participant
transmits an MIRPDU towards the MAC relay entity:
cbpMirpGroup (1) Use the Nearest Customer Bridge group
address from Table 8-1 with the MIRP B-VID.
cbpMirpVlan (2) Use the Nearest Customer Bridge group
address from Table 8-1 with the Backbone
VLAN Identifier field from the Backbone
Service Instance table.
cbpMirpTable (3) Use the Default Backbone Destination and
Backbone VLAN Identifier fields from the
Backbone Service Instance table.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "Table 8-1, 12.14.7.7.2 k), 12.14.7.7.2 d)"
DEFVAL { cbpMirpGroup }
::= { ieee8021PbbBackboneEdgeBridgeObjects 9 }
ieee8021PbbMirpPnpEnable
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value specifying the administrative status requested
by management for attaching a MIRP Participant to a PNP if
and only if this system is a Backbone Edge Bridge (BEB):
true(1) The BEB is to attach a MIRP Participant to exactly one
Port, either a management Port with no LAN connection
external to the BEB, or a PNP.
false(2) No MIRP Participant is to be present on any PNP (or
on the MAC Relay-facing side of a CBP).
The value of this object MUST be retained across
reinitializations of the management system.
"
REFERENCE "12.14.7.7.2 j), 12.14.7.7.2 c)"
DEFVAL { true }
::= { ieee8021PbbBackboneEdgeBridgeObjects 10 }
ieee8021PbbMirpPnpPortNumber
OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumberOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Port Number of the Provider Network Port (PNP) that
has an associated MIRP Participant, or 0, if no Bridge Port has
an associated MIRP Participant. This object indexes an entry in
the Bridge Port Table. The system SHALL ensure that either
ieee8021PbbMirpPnpPortNumber contains 0, or that the indexed
ieee8021BridgeBasePortType object contains the value
providerNetworkPort(3)."
REFERENCE "12.14.7.7.2 j), 12.14.7.7.2 c)"
DEFVAL { 0 }
::= { ieee8021PbbBackboneEdgeBridgeObjects 11 }
-- ******************************************************************
-- IEEE 802.1Qbe MIB Module - Conformance Information
-- ******************************************************************
ieee8021MirpV2Compliances
OBJECT IDENTIFIER
::= { ieee8021MirpV2Conformance 1 }
ieee8021MirpV2Groups
OBJECT IDENTIFIER
::= { ieee8021MirpV2Conformance 2 }
-- ******************************************************************
-- Units of conformance
-- ******************************************************************
ieee8021MirpV2ReqdGroup
OBJECT-GROUP
OBJECTS {
ieee8021MirpV2PortEnabledStatus,
ieee8021PbbMirpEnableStatus,
ieee8021PbbMirpBvid,
ieee8021PbbMirpDestSelector,
ieee8021PbbMirpPnpEnable,
ieee8021PbbMirpPnpPortNumber
}
STATUS current
DESCRIPTION
"Objects in the MIRP augmentation required group."
::= { ieee8021MirpV2Groups 1 }
-- ******************************************************************
-- MIB Module Compliance statements
-- ******************************************************************
ieee8021MirpV2BridgeCompliance
MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support by a Bridge of
the IEEE8021-MIRP-MIB module."
MODULE SNMPv2-MIB -- The SNMPv2-MIB, RFC 3418
MANDATORY-GROUPS {
systemGroup
}
MODULE
MANDATORY-GROUPS {
ieee8021MirpV2ReqdGroup
}
::= { ieee8021MirpV2Compliances 1 }
END
View Git Blame Copy Permalink