WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nokia/TIMETRA-ISIS-NG-MIB

9881 lines
361 KiB
Plaintext
Raw Permalink Blame History

TIMETRA-ISIS-NG-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddress, InetAddressPrefixLength,
InetAddressType,
InetAutonomousSystemNumber
FROM INET-ADDRESS-MIB
SNPAAddress, SystemID, isisCircIndex,
isisISAdjIndex, isisISAdjState,
isisManAreaAddrExistState,
isisSysInstance, isisSysL1State,
isisSysL2State
FROM ISIS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Counter64, Gauge32,
Integer32, IpAddress, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
TimeTicks, Unsigned32
FROM SNMPv2-SMI
DisplayString, MacAddress, RowStatus,
TEXTUAL-CONVENTION, TimeInterval,
TimeStamp, TruthValue
FROM SNMPv2-TC
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
TLNamedItemOrEmpty, TNamedItemOrEmpty,
TResolveStatus,
TmnxAdjacencySetFamilyType,
TmnxAdminState, TmnxEnabledDisabled,
TmnxHigh32, TmnxIgpSCFamilyType,
TmnxLow32, TmnxOperState,
TmnxReferenceBandwidth
FROM TIMETRA-TC-MIB
TmnxInetCidrNextHopOwner,
TmnxInetCidrNextHopType, vRtrID,
vRtrIfIndex
FROM TIMETRA-VRTR-MIB
;
timetraIsisNgMIBModule MODULE-IDENTITY
LAST-UPDATED "202002010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the
extensions to the ISIS routing protocol for the Nokia SROS device.
Copyright 2013-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "202002010000Z"
DESCRIPTION
"Rev 20.0 01 Feb 2020 00:00
20.0 release of the TIMETRA-ISIS-NG-MIB."
REVISION "201904010000Z"
DESCRIPTION
"Rev 19.0 01 April 2019 00:00
19.0 release of the TIMETRA-ISIS-NG-MIB."
REVISION "201802010000Z"
DESCRIPTION
"Rev 16.0 01 Feb 2018 00:00
16.0 release of the TIMETRA-ISIS-NG-MIB."
REVISION "201603010000Z"
DESCRIPTION
"Rev 15.0 01 Mar 2016 00:00
15.0 release of the TIMETRA-ISIS-NG-MIB."
REVISION "201503010000Z"
DESCRIPTION
"Rev 14.0 01 Mar 2015 00:00
14.0 release of the TIMETRA-ISIS-NG-MIB."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 01 Jan 2015 00:00
13.0 release of the TIMETRA-ISIS-NG-MIB."
REVISION "201304080000Z"
DESCRIPTION
"Rev 0.1 08 Apr 2013 00:00
Initial version of the TIMETRA-ISIS-NG-MIB."
::= { timetraSRMIBModules 88 }
TmnxIsisLSPBuffSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxIsisLSPBuffSize is the extended integer sub range for LSP size."
SYNTAX Integer32 (490..9190)
TmnxIsisLSPBuffExtSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxIsisLSPBuffExtSize is the extended integer sub range for LSP size
for increased interface mtu in fp4 cards."
SYNTAX Integer32 (490..9778)
TmnxIsisRoutingTopology ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxIsisRoutingTopology specifies the isis routing topology.
native(1) - Indicates standard topology.
mt(2) - Indicates multi-topology for IPv4/IPv6 unicast/multicast
routing."
SYNTAX INTEGER {
none (0),
native (1),
mt (2)
}
tmnxIsisObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 88 }
tmnxIsisSystemObjs OBJECT IDENTIFIER ::= { tmnxIsisObjs 1 }
tmnxIsisTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisTable provides an extension of the isisSysTable in the
ISIS-MIB."
::= { tmnxIsisSystemObjs 1 }
tmnxIsisEntry OBJECT-TYPE
SYNTAX TmnxIsisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisTable represents additional columns for
attributes specific to the Nokia SROS series IS-IS protocol instance
on this router."
INDEX {
vRtrID,
isisSysInstance
}
::= { tmnxIsisTable 1 }
TmnxIsisEntry ::= SEQUENCE
{
tmnxIsisLastEnabledTime TimeStamp,
tmnxIsisAuthKey OCTET STRING,
tmnxIsisAuthType INTEGER,
tmnxIsisAuthCheck TruthValue,
tmnxIsisExportPolicy1 TNamedItemOrEmpty,
tmnxIsisExportPolicy2 TNamedItemOrEmpty,
tmnxIsisExportPolicy3 TNamedItemOrEmpty,
tmnxIsisExportPolicy4 TNamedItemOrEmpty,
tmnxIsisExportPolicy5 TNamedItemOrEmpty,
tmnxIsisLspLifetime Unsigned32,
tmnxIsisOverloadTimeout Unsigned32,
tmnxIsisOperState TmnxOperState,
tmnxIsisReferenceBw TmnxReferenceBandwidth,
tmnxIsisTrafficEng TruthValue,
tmnxIsisShortCuts TruthValue,
tmnxIsisSpfHoldTime Integer32,
tmnxIsisLastSpfRun TimeStamp,
tmnxIsisGracefulRestart TruthValue,
tmnxIsisOverloadOnBoot INTEGER,
tmnxIsisOverloadOnBootTimeout Unsigned32,
tmnxIsisSpfWait Unsigned32,
tmnxIsisSpfInitialWait Unsigned32,
tmnxIsisSpfSecondWait Unsigned32,
tmnxIsisLspMaxWait Unsigned32,
tmnxIsisLspInitialWait Unsigned32,
tmnxIsisLspSecondWait Unsigned32,
tmnxIsisCsnpAuthentication TruthValue,
tmnxIsisHelloAuthentication TruthValue,
tmnxIsisPsnpAuthentication TruthValue,
tmnxIsisGRHelperMode TruthValue,
tmnxIsisEnableIPv4 TruthValue,
tmnxIsisUnicastImport TruthValue,
tmnxIsisMulticastImport TruthValue,
tmnxIsisStrictAdjacencyCheck TruthValue,
tmnxIsisManualSpfTrigger INTEGER,
tmnxIsisMultiTopology TruthValue,
tmnxIsisMultiTopoIPv6Ucast TruthValue,
tmnxIsisIPv6RoutingTopo INTEGER,
tmnxIsisSysOrigL1LSPBuffSize TmnxIsisLSPBuffExtSize,
tmnxIsisSysOrigL2LSPBuffSize TmnxIsisLSPBuffExtSize,
tmnxIsisLdpSyncAdminState TruthValue,
tmnxIsisIPv6UnicastImport TruthValue,
tmnxIsisIPv6MulticastImport TruthValue,
tmnxIsisAdvertisePassiveOnly TruthValue,
tmnxIsisDefaultRouteTag Unsigned32,
tmnxIsisSuppressDefault TruthValue,
tmnxIsisLdpOverRsvp TmnxEnabledDisabled,
tmnxIsisExportLimit Unsigned32,
tmnxIsisExportLimitLogPercent Unsigned32,
tmnxIsisTotalL1ExportedRoutes Gauge32,
tmnxIsisTotalL2ExportedRoutes Gauge32,
tmnxIsisRsvpShortcut TruthValue,
tmnxIsisAdvertiseTunnelLink TruthValue,
tmnxIsisIidTlv TmnxEnabledDisabled,
tmnxIsisL1MacAddress MacAddress,
tmnxIsisL2MacAddress MacAddress,
tmnxIsisSysOperL1LSPBuffSize TmnxIsisLSPBuffExtSize,
tmnxIsisSysOperL2LSPBuffSize TmnxIsisLSPBuffExtSize,
tmnxIsisLoopfreeAlternate TruthValue,
tmnxIsisIPv4McastRoutingTopo TmnxIsisRoutingTopology,
tmnxIsisIPv6McastRoutingTopo TmnxIsisRoutingTopology,
tmnxIsisMultiTopoIPv4Mcast TruthValue,
tmnxIsisMultiTopoIPv6Mcast TruthValue,
tmnxIsisOverloadMaxMetric TruthValue,
tmnxIsisOverloadOnBootMaxMetric TruthValue,
tmnxIsisRouterId Unsigned32,
tmnxIsisAdvRtrCapability INTEGER,
tmnxIsisHelloPadding INTEGER,
tmnxIsisLspRefreshInterval Unsigned32,
tmnxIsisOperRouterId Unsigned32,
tmnxIsisAuthKeyChain TNamedItemOrEmpty,
tmnxIsisIgnoreLspErrors TruthValue,
tmnxIsisSuppressAttachedBit TruthValue,
tmnxIsisRemoteLoopfreeAlternate TruthValue
}
tmnxIsisLastEnabledTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLastEnabledTime indicates the
sysUpTime value when isisSysAdminState was last set to enabled (1) to
run the IS-IS protocol in the router."
::= { tmnxIsisEntry 1 }
tmnxIsisAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..254))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAuthKey specifies the authentication
key string used to verify the authenticity of packets sent by
neighboring routers on an IS-IS interface.
For authentication to succeed both the authentication key and the
authentication type defined by the object tmnxIsisAuthType must match.
If tmnxIsisAuthType is set to 'password', tmnxIsisAuthKey can include
any ASCII character.
Authentication can be configured globally and applied to all ISIS
levels or it can be configured on a per level basis; the most specific
value is used.
When read, tmnxIsisAuthKey always returns an Octet String of length
zero."
DEFVAL { ''H }
::= { tmnxIsisEntry 2 }
tmnxIsisAuthType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
password (2),
md5 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAuthType specifies the method of
authentication used to verify the authenticity of packets sent by
neighboring routers on an IS-IS interface.
For authentication to succeed both the authentication key defined in
the tmnxIsisAuthKey object and the authentication type must match.
Authentication can be configured globally and applied to all ISIS
levels or it can be configured on a per level basis; the most specific
value is used."
DEFVAL { none }
::= { tmnxIsisEntry 3 }
tmnxIsisAuthCheck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAuthCheck specifies whether
authentication check has to be performed on received
IS-IS protocol packets to determine if they should be rejected.
When tmnxIsisAuthCheck has a value of 'true', all IS-IS protocol
packets that have a mismatch on either the authentication type,
specified by the value of tmnxIsisAuthType, or the authentication
key, given in tmnxIsisAuthKey are rejected.
When tmnxIsisAuthCheck has a value of 'false', authentication is
performed on received IS-IS protocol packets but mismatched
packets are not rejected."
DEFVAL { true }
::= { tmnxIsisEntry 4 }
tmnxIsisExportPolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportPolicy1 specifies the name of
the first policy to be used for determining which routes are exported
from the routing table to IS-IS.
If no export policy is defined, non IS-IS router will not be exported
from the routing table manager to IS-IS.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The export policy name list, tmnxIsisExportPolicy1 through
tmnxIsisExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisEntry 5 }
tmnxIsisExportPolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportPolicy2 specifies the name of
the second policy to be used for determining which routes are exported
from the routing table to IS-IS.
If no export policy is defined, non IS-IS router will not be exported
from the routing table manager to IS-IS.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The export policy name list, tmnxIsisExportPolicy1 through
tmnxIsisExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisEntry 6 }
tmnxIsisExportPolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportPolicy3 specifies the name of
the third policy to be used for determining which routes are exported
from the routing table to IS-IS.
If no export policy is defined, non IS-IS router will not be exported
from the routing table manager to IS-IS.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The export policy name list, tmnxIsisExportPolicy1 through
tmnxIsisExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisEntry 7 }
tmnxIsisExportPolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportPolicy4 specifies the name of
the fourth policy to be used for determining which routes are exported
from the routing table to IS-IS.
If no export policy is defined, non IS-IS router will not be exported
from the routing table manager to IS-IS.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The export policy name list, tmnxIsisExportPolicy1 through
tmnxIsisExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisEntry 8 }
tmnxIsisExportPolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportPolicy5 specifies the name of
the fifth policy to be used for determining which routes are exported
from the routing table to IS-IS.
If no export policy is defined, non IS-IS router will not be exported
from the routing table manager to IS-IS.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The export policy name list, tmnxIsisExportPolicy1 through
tmnxIsisExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisEntry 9 }
tmnxIsisLspLifetime OBJECT-TYPE
SYNTAX Unsigned32 (350..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspLifetime specifies the amount of
time, in seconds, a given LSP is considered valid without the
originating router having refreshed the LSP.
The actual LSP refresh timer is the value of tmnxIsisLspLifetime minus
317 seconds."
DEFVAL { 1200 }
::= { tmnxIsisEntry 10 }
tmnxIsisOverloadTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOverloadTimeout specifies the amount
of time, in seconds, the router operates in the overload state before
attempting to reestablish normal operations.
While in overload state, this IS-IS router will only be used if the
destination is only reachable via this router; it is not used for
other transit traffic.
Operationally placing the router into the overload state is often used
as a precursor to shutting down the IS-IS protocol operation.
This variable is an extension to the isisSysWaitTime to accept an
additional value of 0 to specify that the router is in overload
infinitely."
DEFVAL { 0 }
::= { tmnxIsisEntry 11 }
tmnxIsisOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOperState indicates the current
operating state of this IS-IS protocol instance on this router."
::= { tmnxIsisEntry 12 }
tmnxIsisReferenceBw OBJECT-TYPE
SYNTAX TmnxReferenceBandwidth
UNITS "kilobps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisReferenceBw specifies the reference
bandwidth that needs to be used to calculate the cost.
To configure higher reference bandwidth values, please use the newer
objects tmnxIsisReferenceBwU64High and tmnxIsisReferenceBwU64Low in
tmnxIsisExtTable.
In case a reference bandwidth is configured in tmnxIsisExtTable that
exceeds the maximum of the tmnxIsisReferenceBw range, this object will
return the maximum value. The real reference bandwidth can be found in
tmnxIsisReferenceBwU64High and tmnxIsisReferenceBwU64Low.
In order to calculate the lowest cost to reach a given destination
each configured level on each interface must have a cost.
If the reference-bandwidth is defined then the cost is calculated
using the following formula:
Cost = reference-bandwidth / bandwidth.
If the reference bandwidth is configured as Ten Gig (10,000,000,000) a
100-Mbps interface has a default metric of 100. In order for metrics
in excess of 63 to be configured wide metrics must be deployed.
A value of '0' means that the reference bandwidth is not defined."
DEFVAL { 0 }
::= { tmnxIsisEntry 13 }
tmnxIsisTrafficEng OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisTrafficEng specifies whether traffic
engineering is enabled for the router.
When the value of tmnxIsisTrafficEng is 'true', traffic engineering is
enabled for the router.
When the value of tmnxIsisTrafficEng is 'false', traffic engineering
is disabled so that te-metrics are not generated and are ignored when
received by this node."
DEFVAL { false }
::= { tmnxIsisEntry 14 }
tmnxIsisShortCuts OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisShortCuts indicates whether IGP
shortcuts are required or not.
When the value of tmnxIsisShortCuts is 'true', MPLS label switched
paths of LSPs are used as next hops whenever BGP need to resolve the
next hop within the IS-IS domain.
When the value of tmnxIsisShortCuts is 'false', IGP shortcuts are not
required by BGP.
This doesn't have any meaning if tmnxIsisTrafficEng is set to false."
::= { tmnxIsisEntry 15 }
tmnxIsisSpfHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfHoldTime indicates the time
interval at which SPF is run."
::= { tmnxIsisEntry 16 }
tmnxIsisLastSpfRun OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLastSpfRun indicates the sysUpTime
value when the last SPF run was performed for this instance of the
IS-IS protocol in the router."
::= { tmnxIsisEntry 17 }
tmnxIsisGracefulRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisGracefulRestart specifies whether the
graceful restart is enabled or disabled for this instance of IS-IS on
the router."
DEFVAL { false }
::= { tmnxIsisEntry 18 }
tmnxIsisOverloadOnBoot OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOverloadOnBoot specifies if the router
should be in overload state right after the boot up process.
If the tmnxIsisOverloadOnBoot is set to 'enabled' the overload timeout
is maintained by tmnxIsisOverloadOnBootTimeout."
DEFVAL { disabled }
::= { tmnxIsisEntry 19 }
tmnxIsisOverloadOnBootTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOverloadOnBootTimeout specifies the
amount of time, in seconds, for which the router operates in the
overload state before attempting to reestablish normal operations when
the system comes up after a fresh boot.
While in overload state, this IS-IS router will only be used if the
destination is only reachable via this router; it is not used for
other transit traffic."
DEFVAL { 0 }
::= { tmnxIsisEntry 20 }
tmnxIsisSpfWait OBJECT-TYPE
SYNTAX Unsigned32 (10..120000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfWait specifies the Maximum interval
between two consecutive spf calculations in milliseconds."
DEFVAL { 10000 }
::= { tmnxIsisEntry 21 }
tmnxIsisSpfInitialWait OBJECT-TYPE
SYNTAX Unsigned32 (10..100000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfInitialWait specifies the initial
SPF calculation delay (in milliseconds) after a topology change."
DEFVAL { 1000 }
::= { tmnxIsisEntry 22 }
tmnxIsisSpfSecondWait OBJECT-TYPE
SYNTAX Unsigned32 (10..100000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfSecondWait specifies the hold time,
in milliseconds, between the first and second SPF calculation.
Subsequent SPF runs will occur at exponentially increasing intervals
of spf-second-wait i.e. if spf-second-wait is 1000, then the next SPF
will run after 2000 msec, the next one at 4000 msec etc until it is
capped off at spf-wait value.
The SPF interval will stay at spf-wait value until there are no more
SPF runs scheduled in that interval. After a full interval without any
SPF runs, the SPF interval will drop back to spf-initial-wait."
DEFVAL { 1000 }
::= { tmnxIsisEntry 23 }
tmnxIsisLspMaxWait OBJECT-TYPE
SYNTAX Unsigned32 (10..120000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspMaxWait specifies the maximum
interval, in milliseconds, between two consecutive occurrences of an
LSP being generated."
DEFVAL { 5000 }
::= { tmnxIsisEntry 24 }
tmnxIsisLspInitialWait OBJECT-TYPE
SYNTAX Unsigned32 (10..100000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspInitialWait specifies the initial
LSP generation delay in milliseconds."
DEFVAL { 10 }
::= { tmnxIsisEntry 25 }
tmnxIsisLspSecondWait OBJECT-TYPE
SYNTAX Unsigned32 (10..100000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspSecondWait specifies the hold time,
in milliseconds, between the first and second LSP generation."
DEFVAL { 1000 }
::= { tmnxIsisEntry 26 }
tmnxIsisCsnpAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisCsnpAuthentication specifies whether
authentication of CSNP packets is enabled or not.
When tmnxIsisCsnpAuthentication has a value of 'true', authentication
of individual ISIS packets of CSNP type is enabled.
When tmnxIsisCsnpAuthentication has a value of 'false', authentication
of CSNP packets is suppressed."
DEFVAL { true }
::= { tmnxIsisEntry 27 }
tmnxIsisHelloAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisHelloAuthentication specifies whether
authentication of HELLO packets is enabled or not.
When tmnxIsisHelloAuthentication has a value of 'true', authentication
of individual ISIS packets of HELLO type is enabled.
When tmnxIsisHelloAuthentication has a value of 'false',
authentication of HELLO packets is suppressed."
DEFVAL { true }
::= { tmnxIsisEntry 28 }
tmnxIsisPsnpAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPsnpAuthentication specifies whether
authentication of PSNP packets is enabled or not.
When tmnxIsisPsnpAuthentication has a value of 'true', authentication
of individual ISIS packets of PSNP type is enabled.
When tmnxIsisPsnpAuthentication has a value of 'false', authentication
of PSNP packets is suppressed."
DEFVAL { true }
::= { tmnxIsisEntry 29 }
tmnxIsisGRHelperMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisGRHelperMode specifies whether the
graceful restart helper mode is enabled or disabled for this instance
of IS-IS on the router.
The value of the object tmnxIsisGRHelperMode is only valid if the
value of object tmnxIsisGracefulRestart is 'true'.
When tmnxIsisGRHelperMode has a value of 'true' graceful restart
helper capabilities are enabled.
When tmnxIsisGRHelperMode has a value of 'false' the graceful restart
helper capabilities are disabled."
DEFVAL { false }
::= { tmnxIsisEntry 30 }
tmnxIsisEnableIPv4 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisEnableIPv4 specifies whether this
IS-IS instance supports IPv4.
When tmnxIsisEnableIPv4 has a value of 'true', the IS-IS instance
supports IPv4, and when it has a value of 'false', it does not."
DEFVAL { true }
::= { tmnxIsisEntry 31 }
tmnxIsisUnicastImport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisUnicastImport specifies whether ISIS
protocol will submit routes into the unicast Route Table Manage(RTM).
When tmnxIsisUnicastImport has a value of 'true', the IS-IS instance
submits routes into the unicast RTM, and when it has a value of
'false', it does not."
DEFVAL { true }
::= { tmnxIsisEntry 32 }
tmnxIsisMulticastImport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisMulticastImport specifies whether ISIS
protocol will submit routes into the multicast Reverse Path
Forwarding(RPF) Route Table Manage(RTM).
When tmnxIsisMulticastImport has a value of 'true', ISIS protocol
submits routes into the multicast RPF RTM and when it has a value of
'false', it does not."
DEFVAL { false }
::= { tmnxIsisEntry 33 }
tmnxIsisStrictAdjacencyCheck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStrictAdjacencyCheck specifies whether
an ISIS adjacency can be formed when two routers do not run the same
IP versions.
When tmnxIsisStrictAdjacencyCheck is 'true', both routers have to run
the same IP versions in the ISIS protocol.
When tmnxIsisStrictAdjacencyCheck is 'false', having one common IP
version running is enough to form an adjacency."
DEFVAL { false }
::= { tmnxIsisEntry 34 }
tmnxIsisManualSpfTrigger OBJECT-TYPE
SYNTAX INTEGER {
noAction (1),
runTotalSpf (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisManualSpfTrigger specifies a manual
Dijkstra SPF calculation trigger.
When tmnxIsisManualSpfTrigger is set to 'runTotalSpf' a normal
Dijkstra SPF calculation is performed.
GETs and GETNEXTs on this variable return 'noAction'."
DEFVAL { noAction }
::= { tmnxIsisEntry 35 }
tmnxIsisMultiTopology OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisMultiTopology specifies if the multi
topology for ISIS is enabled."
DEFVAL { false }
::= { tmnxIsisEntry 36 }
tmnxIsisMultiTopoIPv6Ucast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisMultiTopoIPv6Ucast specifies if IPv6
unicast is enabled for ISIS multi topology.
To enable IPv6 unicast on ISIS, tmnxIsisMultiTopology should be set to
'true'."
DEFVAL { false }
::= { tmnxIsisEntry 37 }
tmnxIsisIPv6RoutingTopo OBJECT-TYPE
SYNTAX INTEGER {
none (0),
native (1),
mt (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIPv6RoutingTopo specifies the routing
topology for IPv6.
If the value of tmnxIsisIPv6RoutingTopo is set to 'mt', multi topology
for ipv6 routing is in effect only if tmnxIsisMultiTopoIPv6Ucast is
set to 'true'."
DEFVAL { none }
::= { tmnxIsisEntry 38 }
tmnxIsisSysOrigL1LSPBuffSize OBJECT-TYPE
SYNTAX TmnxIsisLSPBuffExtSize
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSysOrigL1LSPBuffSize specifies the
maximum size of Level 1 LSPs and SNPs originated by this instance.
This object may only be modified when the ISIS-MIB::isisSysAdminState
member of the corresponding entry in the ISIS-MIB::isisSysTable table
has a value of 'outOfService (3)'.
This object replaces the ISIS-MIB::isisSysOrigL1LSPBuffSize member of
the ISIS-MIB::isisSysTable table."
DEFVAL { 1492 }
::= { tmnxIsisEntry 39 }
tmnxIsisSysOrigL2LSPBuffSize OBJECT-TYPE
SYNTAX TmnxIsisLSPBuffExtSize
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSysOrigL2LSPBuffSize specifies the
maximum size of Level 2 LSPs and SNPs originated by this system.
This object may only be modified when the ISIS-MIB::isisSysAdminState
member of the corresponding entry in the ISIS-MIB::isisSysTable table
has a value of 'outOfService (3)'.
This object replaces the ISIS-MIB::isisSysOrigL2LSPBuffSize member of
the ISIS-MIB::isisSysTable table."
DEFVAL { 1492 }
::= { tmnxIsisEntry 40 }
tmnxIsisLdpSyncAdminState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLdpSyncAdminState specifies whether
the IGP-LDP synchronization feature is enabled or disabled on all
interfaces participating in the ISIS routing protocol.
When the value is set to 'false', IGP immediately advertises the
actual value of the link cost for all interfaces which have the
IGP-LDP synchronization enabled if the currently advertised cost is
different. It will then disable IGP-LDP synchronization for all
interfaces."
DEFVAL { true }
::= { tmnxIsisEntry 41 }
tmnxIsisIPv6UnicastImport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIPv6UnicastImport specifies whether
ISIS protocol will submit routes into the unicast IPv6 Route Table
Manage(RTM).
When tmnxIsisUnicastImport has a value of 'true', the IS-IS instance
submits routes into the unicast IPv6 RTM, and when it has a value of
'false', it does not."
DEFVAL { true }
::= { tmnxIsisEntry 42 }
tmnxIsisIPv6MulticastImport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIPv6MulticastImport specifies whether
ISIS protocol will submit routes into the multicast IPv6 Reverse Path
Forwarding(RPF) Route Table Manage(RTM).
When tmnxIsisMulticastImport has a value of 'true', ISIS protocol
submits routes into the multicast IPv6 RPF RTM and when it has a value
of 'false', it does not."
DEFVAL { false }
::= { tmnxIsisEntry 43 }
tmnxIsisAdvertisePassiveOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdvertisePassiveOnly specifies whether
ISIS protocol will advertise only prefixes that belong to passive
interfaces.
When tmnxIsisAdvertisePassiveOnly is set to 'true', ISIS protocol
advertises only prefixes that belong to passive interfaces."
DEFVAL { false }
::= { tmnxIsisEntry 44 }
tmnxIsisDefaultRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisDefaultRouteTag specifies a 32-bit
integer tag for the ISIS default route.
This route tag can be used to apply administrative policy.
A value of 0 indicates that the tag has not been set."
DEFVAL { 0 }
::= { tmnxIsisEntry 45 }
tmnxIsisSuppressDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSuppressDefault specifies whether ISIS
protocol will ignore the ATT bit and therefore suppress the
installation of the default routes on L1 router.
When tmnxIsisSuppressDefault is set to 'true', ISIS protocol will
ignore the ATT bit and therefore suppress the installation of the
default routes."
DEFVAL { false }
::= { tmnxIsisEntry 46 }
tmnxIsisLdpOverRsvp OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLdpOverRsvp specifies whether
LDP-over-RSVP feature is enabled or disabled for ISIS.
When tmnxIsisLdpOverRsvp is enabled, ISIS will select the endpoint
that is closest to the destination for further selection of
LDP-over-RSVP tunnels to that endpoint."
DEFVAL { disabled }
::= { tmnxIsisEntry 47 }
tmnxIsisExportLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportLimit specifies the maximum
number of routes or prefixes that can be exported into ISIS from the
route table.
A value of 0 indicates that the export limit for routes or prefixes
has been disabled."
DEFVAL { 0 }
::= { tmnxIsisEntry 48 }
tmnxIsisExportLimitLogPercent OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisExportLimitLogPercent specifies the
percentage of the export-limit at which a warning log message and SNMP
notification would be sent; this would only be a warning and
additional routes will be learned up to 100% of tmnxIsisExportLimit.
A value of 0 indicates that tmnxIsisExportLimitLogPercent is disabled
and no log message or SNMP notification would be sent."
DEFVAL { 0 }
::= { tmnxIsisEntry 49 }
tmnxIsisTotalL1ExportedRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisTotalL1ExportedRoutes indicates the
total number of routes exported into ISIS level 1 from the route table
manager when an export policy is configured.
If no export policy is configured, tmnxIsisTotalL1ExportedRoutes will
return 0."
::= { tmnxIsisEntry 50 }
tmnxIsisTotalL2ExportedRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisTotalL2ExportedRoutes indicates the
total number of routes exported into ISIS level 2 from the route table
manager when an export policy is configured.
If no export policy is configured, tmnxIsisTotalL2ExportedRoutes will
return 0."
::= { tmnxIsisEntry 51 }
tmnxIsisRsvpShortcut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRsvpShortcut specifies whether RSVP-TE
shortcut for resolving IGP routes has been enabled or disabled for
IS-IS.
When the value of tmnxIsisRsvpShortcut is set to true RSVP-TE shortcut
is enabled and when tmnxIsisRsvpShortcut is set to false RSVP-TE
shortcut is disabled for IS-IS."
DEFVAL { false }
::= { tmnxIsisEntry 52 }
tmnxIsisAdvertiseTunnelLink OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdvertiseTunnelLink specifies whether
advertisement of LSP shortcuts into IGP has been enabled or disabled
for IS-IS.
When the value of tmnxIsisAdvertiseTunnelLink is set to true LSP
shortcut advertisement into IGP is enabled and when
tmnxIsisAdvertiseTunnelLink is set to false LSP shortcut advertisement
into IGP is disabled."
DEFVAL { false }
::= { tmnxIsisEntry 53 }
tmnxIsisIidTlv OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIidTlv specifies whether Instance
Identifier (IID) TLV has been enabled or disabled for this ISIS
instance.
When the value of tmnxIsisIidTlv is 'enabled', each ISIS instance
marks its packets with the IID TLV containing its unique 16-bit IID
for the routing domain."
DEFVAL { disabled }
::= { tmnxIsisEntry 54 }
tmnxIsisL1MacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisL1MacAddress specifies the destination
MAC address for all L1 ISIS neighbors on the link for this ISIS
instance."
DEFVAL { '0180C2000014'H }
::= { tmnxIsisEntry 55 }
tmnxIsisL2MacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisL2MacAddress specifies the destination
MAC address for all L2 ISIS neighbors on the link for this ISIS
instance."
DEFVAL { '0180C2000015'H }
::= { tmnxIsisEntry 56 }
tmnxIsisSysOperL1LSPBuffSize OBJECT-TYPE
SYNTAX TmnxIsisLSPBuffExtSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSysOperL1LSPBuffSize indicates the
operational size of Level 1 LSPs and SNPs originated by this instance."
::= { tmnxIsisEntry 57 }
tmnxIsisSysOperL2LSPBuffSize OBJECT-TYPE
SYNTAX TmnxIsisLSPBuffExtSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSysOperL2LSPBuffSize indicates the
operational size of Level 2 LSPs and SNPs originated by this instance."
::= { tmnxIsisEntry 58 }
tmnxIsisLoopfreeAlternate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLoopfreeAlternate specifies whether IP
fast reroute capability for ISIS is enabled or disabled.
When the value of tmnxIsisLoopfreeAlternate is set to 'true' IP fast
reroute capability for ISIS is enabled and when
tmnxIsisLoopfreeAlternate is set to 'false' IP fast reroute capability
for ISIS is disabled."
DEFVAL { false }
::= { tmnxIsisEntry 59 }
tmnxIsisIPv4McastRoutingTopo OBJECT-TYPE
SYNTAX TmnxIsisRoutingTopology
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIPv4McastRoutingTopo specifies which
multicast topology (MT) is enabled.
If the value of tmnxIsisIPv4McastRoutingTopo is 'native' then MT 0
IPv4 topology is enabled and ISIS protocol will add routes to the
multicast RTM.
If the value of tmnxIsisIPv4McastRoutingTopo is 'mt' then MT 3 IPv4
topology is enabled and routes will be added to the multicast RTM.
If the value of tmnxIsisIPv4McastRoutingTopo is 'none' then nothing is
added to the multicast RTM."
DEFVAL { native }
::= { tmnxIsisEntry 60 }
tmnxIsisIPv6McastRoutingTopo OBJECT-TYPE
SYNTAX TmnxIsisRoutingTopology
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIPv6McastRoutingTopo specifies which
multicast topology (MT) is enabled.
If the value of tmnxIsisIPv6McastRoutingTopo is 'native' then MT 0
IPv6 topology is enabled and ISIS protocol will add routes to the
multicast RTM.
If the value of tmnxIsisIPv6McastRoutingTopo is 'mt' then MT 4 IPv6
topology is enabled and routes will be added to the multicast RTM.
If the value of tmnxIsisIPv6McastRoutingTopo is 'none' then nothing is
added to the multicast RTM."
DEFVAL { native }
::= { tmnxIsisEntry 61 }
tmnxIsisMultiTopoIPv4Mcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisMultiTopoIPv4Mcast specifies whether
IPv4 multicast for ISIS multi topology is enabled or not.
To enable IPv4 multicast on ISIS, tmnxIsisMultiTopology should be set
to 'true'."
DEFVAL { false }
::= { tmnxIsisEntry 62 }
tmnxIsisMultiTopoIPv6Mcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisMultiTopoIPv6Mcast specifies whether
IPv6 multicast for ISIS multi topology is enabled or not.
To enable IPv6 multicast on ISIS, tmnxIsisMultiTopology should be set
to 'true'."
DEFVAL { false }
::= { tmnxIsisEntry 63 }
tmnxIsisOverloadMaxMetric OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOverloadMaxMetric specifies whether
max-metric is enabled or disabled for this instance of IS-IS on the
router.
If the value of tmnxIsisOverloadMaxMetric set to 'true', the SR-OS
router would not set the overload bit but would instead set all
transit links to the maximum value of '0xFFFFFE'."
DEFVAL { false }
::= { tmnxIsisEntry 64 }
tmnxIsisOverloadOnBootMaxMetric OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOverloadOnBootMaxMetric specifies
whether max-metric is enabled or disabled for this instance of IS-IS
on the router.
If the value of tmnxIsisOverloadOnBootMaxMetric set to 'true', the
SR-OS router would not set the overload bit but would instead set all
transit links to the maximum value of '0xFFFFFE'."
DEFVAL { false }
::= { tmnxIsisEntry 65 }
tmnxIsisRouterId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouterId specifies a 32-bit integer
uniquely identifying the router in the Autonomous System."
DEFVAL { 0 }
::= { tmnxIsisEntry 66 }
tmnxIsisAdvRtrCapability OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
area (2),
as (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdvRtrCapability specifies the ISIS
advertise router capabilities."
DEFVAL { disable }
::= { tmnxIsisEntry 67 }
tmnxIsisHelloPadding OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
adaptive (1),
loose (2),
strict (3),
none (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisHelloPadding specifies whether padding
should be done on the ISIS hello packets.
If the value of tmnxIsisHelloPadding is set to disable, the padding is
disabled on all types of interfaces for all adjacency states. However,
padding may be done if it is configured at one of the higher/parent
levels.
If the value of tmnxIsisHelloPadding is set to adaptive, the padding
is done until the state of the neighbor adjacency is up.
If the value of tmnxIsisHelloPadding is set to loose, the padding is
done until the state of the neighbor adjacency is initialized.
If the value of tmnxIsisHelloPadding is set to strict, the padding is
done for all adjacency states.
If the value of tmnxIsisHelloPadding is set to none, the padding is
disabled on all types of interfaces for all adjacency states. Also,
padding will not be done even if it is configured at one of the
higher/parent levels."
DEFVAL { disable }
::= { tmnxIsisEntry 68 }
tmnxIsisLspRefreshInterval OBJECT-TYPE
SYNTAX Unsigned32 (150..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspRefreshInterval specifies the
interval, in seconds, at which LSPs are refreshed.
To be able to refresh LSPs before they time out, the
tmnxIsisLspRefreshInterval must be set to a value less than the value
set for tmnxIsisLspLifetime.
The interval value of this object is ignored when
tmnxIsisLspRefreshHalfLifetime is true."
DEFVAL { 600 }
::= { tmnxIsisEntry 69 }
tmnxIsisOperRouterId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisOperRouterId indicates a 32-bit integer uniquely
identifying the router in the Autonomous System."
::= { tmnxIsisEntry 70 }
tmnxIsisAuthKeyChain OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisAuthKeyChain specifies the keychain to use to
sign and/or authenticate the IS-IS instance.
The keychain name is defined by tmnxKeyChainName and is the index for
TIMETRA-SECURITY-MIB::tmnxKeyChainTable"
DEFVAL { ''H }
::= { tmnxIsisEntry 71 }
tmnxIsisIgnoreLspErrors OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIgnoreLspErrors specifies whether
checksum errors are ignored or not.
If the value of tmnxIsisIgnoreLspErrors is set to 'false' lsp packets
(CSNP/PSNP) with checksum errors will purge the corresponding lsp
entry in the database; if the value is set to 'true', the packet will
get discarded."
DEFVAL { false }
::= { tmnxIsisEntry 72 }
tmnxIsisSuppressAttachedBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSuppressAttachedBit specifies whether
ISIS protocol will suppress setting the ATT bit on L1L2 router.
When tmnxIsisSuppressAttachedBit is set to 'true', ISIS protocol will
suppress setting the ATT bit and therefore suppress the installation
of a default route to the L1L2 router by all L1 routers in the area."
DEFVAL { false }
::= { tmnxIsisEntry 73 }
tmnxIsisRemoteLoopfreeAlternate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRemoteLoopfreeAlternate specifies
whether remote-lfa is enabled or not.
The value of tmnxIsisRemoteLoopfreeAlternate is only valid when the
object tmnxIsisLoopfreeAlternate has the value 'true'. "
DEFVAL { false }
::= { tmnxIsisEntry 74 }
tmnxIsisLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisLevelTable provides attributes to be applied on a specific
IS-IS protocol level."
::= { tmnxIsisSystemObjs 2 }
tmnxIsisLevelEntry OBJECT-TYPE
SYNTAX TmnxIsisLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisLevelTable represents IS-IS level
default global attributes to be used with interfaces belonging to
a specific IS-IS protocol instance on a specific
router instance. The rows in this table cannot be created nor
destroyed by SNMP SET requests. There are always two rows in this
table that are created by the agent with default values upon system
initialization."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisLevel
}
::= { tmnxIsisLevelTable 1 }
TmnxIsisLevelEntry ::= SEQUENCE
{
tmnxIsisLevel INTEGER,
tmnxIsisLevelAuthKey OCTET STRING,
tmnxIsisLevelAuthType INTEGER,
tmnxIsisLevelExtPreference Unsigned32,
tmnxIsisLevelPreference Unsigned32,
tmnxIsisLevelWideMetricsOnly TruthValue,
tmnxIsisLevelOverloadStatus INTEGER,
tmnxIsisLevelOverloadTimeLeft TimeInterval,
tmnxIsisLevelNumLSPs Unsigned32,
tmnxIsisLevelCsnpAuthentication TruthValue,
tmnxIsisLevelHelloAuthentication TruthValue,
tmnxIsisLevelPsnpAuthentication TruthValue,
tmnxIsisLevelDefMetric Unsigned32,
tmnxIsisLevelIPv6DefMetric Unsigned32,
tmnxIsisLevelLoopfreeAltExclude TruthValue,
tmnxIsisLevelSpbBridgePriority Unsigned32,
tmnxIsisLevelSpbForwardTreeTopo Unsigned32,
tmnxIsisLevelDefIPv4McastMetric Unsigned32,
tmnxIsisLevelDefIPv6McastMetric Unsigned32,
tmnxIsisLevelAdvRtrCapability TruthValue,
tmnxIsisLevelAuthKeyChain TNamedItemOrEmpty,
tmnxIsisLevelLSPBuffSize TmnxIsisLSPBuffExtSize,
tmnxIsisLevelHelloPadding INTEGER,
tmnxIsisLevelDbExportExclude TruthValue,
tmnxIsisLevelMaxOperLSPBuffSize TmnxIsisLSPBuffExtSize,
tmnxIsisLevelBierTemplate TNamedItemOrEmpty,
tmnxIsisLevelBierTemplAdminState TmnxAdminState
}
tmnxIsisLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevel specifies the IS-IS protocol
level to which these row attributes are applied."
::= { tmnxIsisLevelEntry 1 }
tmnxIsisLevelAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..254))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelAuthKey specifies the
authentication key string used to verify the authenticity of packets
sent by neighboring routers on an IS-IS interface at this level.
For authentication to succeed both the authentication key and the
authentication type defined by the tmnxIsisLevelAuthType variable must
match.
If tmnxIsisLevelAuthType is set to 'password', tmnxIsisLevelAuthKey
can include any ASCII character.
When read, tmnxIsisLevelAuthKey always returns an Octet String of
length zero."
DEFVAL { ''H }
::= { tmnxIsisLevelEntry 2 }
tmnxIsisLevelAuthType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
password (2),
md5 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelAuthType specifies the method of
authentication used to verify the authenticity of packets sent by
neighboring routers on an IS-IS interface at this level.
For authentication to succeed both the authentication key defined in
the tmnxIsisLevelAuthKey variable and the authentication type must
match."
DEFVAL { none }
::= { tmnxIsisLevelEntry 3 }
tmnxIsisLevelExtPreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelExtPreference specifies the
preference level to be used with external routes at this IS-IS level.
A route can be learned from different routing protocols supported
in the system, in which case their costs are not comparable. In
this case the preference value is used to decide which route to
use.
The initial default external preference value for IS-IS level 1
is 160. The initial default external preference value for IS-IS
level 2 is 165."
::= { tmnxIsisLevelEntry 4 }
tmnxIsisLevelPreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelPreference specifies the
preference level to be used with internal routes at this IS-IS level.
A route can be learned from different routing protocols supported
in the system, in which case their costs are not comparable. In
this case the preference value is used to decide which route to
use.
The initial default internal preference value for IS-IS level 1
is 15. The initial default internal preference value for IS-IS
level 2 is 18."
::= { tmnxIsisLevelEntry 5 }
tmnxIsisLevelWideMetricsOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelWideMetricsOnly specifies whether
only the wide metric pair of TLVs is generated.
IS-IS metrics can have values between 1 and 63, referred to as
small metrics. IS-IS generates two TLVs: one for the adjacency
and one for the IP prefix. In order to support traffic
engineering, wider metrics are required; a second pair of TLVs
are also generated.
When tmnxIsisLevelWideMetricsOnly has a value of 'false', both the
small and wide metric pairs of TLVs are generated.
When tmnxIsisLevelWideMetricsOnly has a value of 'true', only the wide
metric pair of TLVs is generated."
DEFVAL { false }
::= { tmnxIsisLevelEntry 6 }
tmnxIsisLevelOverloadStatus OBJECT-TYPE
SYNTAX INTEGER {
notInOverload (1),
dynamic (2),
manual (3),
manualOnBoot (4),
singleSfm (5),
fibAddFail (6),
rtmAddFail (7),
prefixLimit (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelOverloadStatus indicates whether
or not this level is in overload state.
When tmnxIsisLevelOverloadStatus has the value 'notInOverload', the
IS-IS level is normal state.
When tmnxIsisLevelOverloadStatus has the value 'dynamic', the level is
in the overload state because of insufficient memory to add additional
entries to the IS-IS database for this level.
When tmnxIsisLevelOverloadStatus has the value 'manual', the level has
been put into the overload state administratively as a result of the
isisSysSetOverload object in the ISIS-MIB having been set.
When tmnxIsisLevelOverloadStatus has the value 'singleSfm', this level
is in overload because there is only a single SFM functioning, while
the value of the single-SFM-overload state (referred to as
TIMETRA-VRTR-MIB::vRtrSingleSfmOverloadAdminState) is equal to
'inService' for this router instance.
When tmnxIsisLevelOverloadStatus has the value 'fibAddFail', this
level is in the overload state because adding routes to the FIB fails.
When tmnxIsisLevelOverloadStatus has the value 'rtmAddFail', the level
is in the overload state because adding routes to the RTM fails.
When tmnxIsisLevelOverloadStatus has the value 'prefixLimit', the
level is in the overload state because this ISIS instance reaches the
configured maximum prefix limit."
::= { tmnxIsisLevelEntry 7 }
tmnxIsisLevelOverloadTimeLeft OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelOverloadTimeLeft indicates the
remaining time, measured in units of centiseconds, before this level
will attempt to enter its normal state.
If tmnxIsisLevelOverloadStatus has a value of 'notInOverload', then a
read of tmnxIsisLevelOverloadTimeLeft returns zero (0)."
::= { tmnxIsisLevelEntry 8 }
tmnxIsisLevelNumLSPs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelNumLSPs indicates the number of
LSPs existing in the system for the particular level."
::= { tmnxIsisLevelEntry 9 }
tmnxIsisLevelCsnpAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelCsnpAuthentication specifies
whether authentication of CSNP packets at this level is enabled or
not.
When tmnxIsisLevelCsnpAuthentication has a value of 'true',
authentication of individual ISIS packets of CSNP type at this level
is enabled.
When tmnxIsisLevelCsnpAuthentication has a value of 'false',
authentication of CSNP packets at this level is suppressed."
DEFVAL { true }
::= { tmnxIsisLevelEntry 10 }
tmnxIsisLevelHelloAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelHelloAuthentication specifies
whether authentication of HELLO packets at this level is enabled or
not.
When tmnxIsisLevelHelloAuthentication has a value of 'true',
authentication of individual ISIS packets of HELLO type at this level
is enabled.
When tmnxIsisLevelHelloAuthentication has a value of 'false',
authentication of HELLO packets at this level is suppressed."
DEFVAL { true }
::= { tmnxIsisLevelEntry 11 }
tmnxIsisLevelPsnpAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelPsnpAuthentication specifies
whether authentication of PSNP packets at this level is enabled or
not.
When tmnxIsisLevelPsnpAuthentication has a value of 'true',
authentication of individual ISIS packets of PSNP type at this level
is enabled.
When tmnxIsisLevelPsnpAuthentication has a value of 'false',
authentication of PSNP packets at this level is suppressed."
DEFVAL { true }
::= { tmnxIsisLevelEntry 12 }
tmnxIsisLevelDefMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelDefMetric specifies the
configurable default metric used for all IS-IS interfaces on this
level.
The value of tmnxIsisLevelDefMetric will not be used if
tmnxIsisIfLevelAdminMetric is configured for an interface."
DEFVAL { 10 }
::= { tmnxIsisLevelEntry 13 }
tmnxIsisLevelIPv6DefMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelIPv6DefMetric specifies the
configurable default metric used for all IS-IS interfaces on this
level for IPv6.
The value of tmnxIsisLevelIPv6DefMetric will not be used if
tmnxIsisIfLvlIPv6UcastAdmMet is configured for an interface."
DEFVAL { 10 }
::= { tmnxIsisLevelEntry 14 }
tmnxIsisLevelLoopfreeAltExclude OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelLoopfreeAltExclude specifies
whether or not the ISIS level should be excluded during LFA
calculations.
If the value is 'true', the ISIS level is excluded from LFA
calculations; if the value is 'false', the ISIS level is included in
LFA calculations.
The value of tmnxIsisLevelLoopfreeAltExclude is only valid when
tmnxIsisLoopfreeAlternate has a value of 'true'."
DEFVAL { false }
::= { tmnxIsisLevelEntry 15 }
tmnxIsisLevelSpbBridgePriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelSpbBridgePriority indicates the
bridge priority of the SPB instance on this IS-IS level."
::= { tmnxIsisLevelEntry 16 }
tmnxIsisLevelSpbForwardTreeTopo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelSpbForwardTreeTopo indicates the
forwarding tree topology of the SPB instance on this IS-IS level."
::= { tmnxIsisLevelEntry 17 }
tmnxIsisLevelDefIPv4McastMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelDefIPv4McastMetric specifies the
configurable default IPv4 multicast metric used for all IS-IS
interfaces on this level."
DEFVAL { 10 }
::= { tmnxIsisLevelEntry 18 }
tmnxIsisLevelDefIPv6McastMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelDefIPv6McastMetric specifies the
configurable default IPv6 multicast metric used for all IS-IS
interfaces on this level."
DEFVAL { 10 }
::= { tmnxIsisLevelEntry 19 }
tmnxIsisLevelAdvRtrCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelAdvRtrCapability specifies
whether or not advertise-router-capabilities are enabled at IS-IS
instance L1 or L2 level."
DEFVAL { true }
::= { tmnxIsisLevelEntry 20 }
tmnxIsisLevelAuthKeyChain OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLevelAuthKeyChain specifies the keychain to use
to sign and/or authenticate the IS-IS instance L1 or L2 level.
The keychain name is defined by tmnxKeyChainName and is the index for
TIMETRA-SECURITY-MIB::tmnxKeyChainTable"
DEFVAL { ''H }
::= { tmnxIsisLevelEntry 21 }
tmnxIsisLevelLSPBuffSize OBJECT-TYPE
SYNTAX TmnxIsisLSPBuffExtSize
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelLSPBuffSize specifies the maximum
size of LSPs and SNPs originated by the IS-IS instance L1 or L2 level.
This object may only be modified when the ISIS-MIB::isisSysAdminState
member of the corresponding entry in the ISIS-MIB::isisSysTable table
has a value of 'outOfService (3)'."
DEFVAL { 1492 }
::= { tmnxIsisLevelEntry 22 }
tmnxIsisLevelHelloPadding OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
adaptive (1),
loose (2),
strict (3),
none (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelHelloPadding specifies whether
padding should be done on the ISIS hello packets.
If the value of tmnxIsisLevelHelloPadding is set to disable, the
padding is disabled on all types of interfaces for all adjacency
states. However, padding may be done if it is configured at one of the
higher/parent levels.
If the value of tmnxIsisLevelHelloPadding is set to adaptive, the
padding is done until the state of the neighbor adjacency is up.
If the value of tmnxIsisLevelHelloPadding is set to loose, the padding
is done until the state of the neighbor adjacency is initialized.
If the value of tmnxIsisLevelHelloPadding is set to strict, the
padding is done for all adjacency states.
If the value of tmnxIsisLevelHelloPadding is set to none, the padding
is disabled on all types of interfaces for all adjacency states. Also,
padding will not be done even if it is configured at one of the
higher/parent levels."
DEFVAL { disable }
::= { tmnxIsisLevelEntry 23 }
tmnxIsisLevelDbExportExclude OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLevelDbExportExclude specifies whether database
export is explicitly disabled or not for this IS-IS level.
If the value is 'true', database export is disabled for this IS-IS
level.
If the value is 'false', this level inherits the configuration from
the instance level; i.e. if tmnxIsisDatabaseExport is 'enabled' for
the IS-IS instance, then database export is enabled for this level."
DEFVAL { false }
::= { tmnxIsisLevelEntry 24 }
tmnxIsisLevelMaxOperLSPBuffSize OBJECT-TYPE
SYNTAX TmnxIsisLSPBuffExtSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelMaxOperLSPBuffSize indicates the
maximum size of LSPs and SNPs that can be originated on any circuit by
this instance for a given area.
The value of tmnxIsisLevelLSPBuffSize and the value of
tmnxIsisSysOrigL1LSPBuffSize or tmnxIsisSysOrigL2LSPBuffSize which
specifies the maximum size of LSPs and SNPs for an instance in this
area should be less than or equal to tmnxIsisLevelMaxOperLSPBuffSize."
::= { tmnxIsisLevelEntry 25 }
tmnxIsisLevelBierTemplate OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelBierTemplate specifies the BIER
template name as defined by vRtrBierTemplateName which is an index in
the table TIMETRA-BIER-MIB::vRtrBierTemplateTable for this IS-IS
level."
DEFVAL { ''H }
::= { tmnxIsisLevelEntry 26 }
tmnxIsisLevelBierTemplAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLevelBierTemplAdminState specifies the
administrative state of the template specified by the object
tmnxIsisLevelBierTemplate for this IS-IS level."
DEFVAL { outOfService }
::= { tmnxIsisLevelEntry 27 }
tmnxIsisStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisStatsTable provides statistics for each instance of IS-IS
protocol configured. There is a one-to-one dependent relationship
between the tables tmnxIsisTable and tmnxIsisStatsTable."
::= { tmnxIsisSystemObjs 3 }
tmnxIsisStatsEntry OBJECT-TYPE
SYNTAX TmnxIsisStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisStatsTable stores statistics for an
instance of IS-IS protocol configured."
INDEX {
vRtrID,
isisSysInstance
}
::= { tmnxIsisStatsTable 1 }
TmnxIsisStatsEntry ::= SEQUENCE
{
tmnxIsisStatsSpfRuns Counter32,
tmnxIsisStatsLSPRegenerations Counter32,
tmnxIsisStatsInitiatedPurges Counter32,
tmnxIsisStatsLSPRecd Counter32,
tmnxIsisStatsLSPDrop Counter32,
tmnxIsisStatsLSPSent Counter32,
tmnxIsisStatsLSPRetrans Counter32,
tmnxIsisStatsIIHRecd Counter32,
tmnxIsisStatsIIHDrop Counter32,
tmnxIsisStatsIIHSent Counter32,
tmnxIsisStatsIIHRetrans Counter32,
tmnxIsisStatsCSNPRecd Counter32,
tmnxIsisStatsCSNPDrop Counter32,
tmnxIsisStatsCSNPSent Counter32,
tmnxIsisStatsCSNPRetrans Counter32,
tmnxIsisStatsPSNPRecd Counter32,
tmnxIsisStatsPSNPDrop Counter32,
tmnxIsisStatsPSNPSent Counter32,
tmnxIsisStatsPSNPRetrans Counter32,
tmnxIsisStatsUnknownRecd Counter32,
tmnxIsisStatsUnknownDrop Counter32,
tmnxIsisStatsUnknownSent Counter32,
tmnxIsisStatsUnknownRetrans Counter32,
tmnxIsisStatsCSPFRequests Counter32,
tmnxIsisStatsCSPFDroppedRequests Counter32,
tmnxIsisStatsCSPFPathsFound Counter32,
tmnxIsisStatsCSPFPathsNotFound Counter32,
tmnxIsisStatsLfaRuns Counter32,
tmnxIsisStatsPartSpfRuns Counter32,
tmnxIsisStatsPartSpfTimeStamp TimeStamp,
tmnxIsisStatsPartLfaRuns Counter32,
tmnxIsisStatsPartLfaTimeStamp TimeStamp,
tmnxIsisStatsLfaTimeStamp TimeStamp,
tmnxIsisStatsSpfTimeStamp TimeStamp,
tmnxIsisStatsSidLabelRangeErrs Counter32,
tmnxIsisStatsSidDupErrs Counter32,
tmnxIsisStatsRlfaRuns Counter32,
tmnxIsisStatsRlfaTimeStamp TimeStamp,
tmnxIsisStatsTiLfaRuns Counter32,
tmnxIsisStatsTiLfaTimeStamp TimeStamp
}
tmnxIsisStatsSpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsSpfRuns indicates the number of
times shortest path first calculations have been made."
::= { tmnxIsisStatsEntry 1 }
tmnxIsisStatsLSPRegenerations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLSPRegenerations indicates the
count of LSP regenerations."
::= { tmnxIsisStatsEntry 2 }
tmnxIsisStatsInitiatedPurges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsInitiatedPurges indicates the
number of times purges have been initiated."
::= { tmnxIsisStatsEntry 3 }
tmnxIsisStatsLSPRecd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLSPRecd indicates the number of
link state PDUs received by this instance."
::= { tmnxIsisStatsEntry 4 }
tmnxIsisStatsLSPDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLSPDrop indicates the number of
link state PDUs dropped by this instance."
::= { tmnxIsisStatsEntry 5 }
tmnxIsisStatsLSPSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLSPSent indicates the number of
link state PDUs sent out by this instance."
::= { tmnxIsisStatsEntry 6 }
tmnxIsisStatsLSPRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLSPRetrans indicates the number
of link state PDUs that had to be retransmitted by this instance."
::= { tmnxIsisStatsEntry 7 }
tmnxIsisStatsIIHRecd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsIIHRecd indicates the number of
IS-IS Hello packets received by this instance."
::= { tmnxIsisStatsEntry 8 }
tmnxIsisStatsIIHDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsIIHDrop indicates the number of
IS-IS Hello packets dropped by this instance."
::= { tmnxIsisStatsEntry 9 }
tmnxIsisStatsIIHSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsIIHSent indicates the number of
IS-IS Hello packets sent out by this instance."
::= { tmnxIsisStatsEntry 10 }
tmnxIsisStatsIIHRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsIIHRetrans indicates the number
of IS-IS Hello packets that had to be retransmitted by this instance."
::= { tmnxIsisStatsEntry 11 }
tmnxIsisStatsCSNPRecd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSNPRecd indicates the number of
Complete Sequence Number PDUs received by this instance."
::= { tmnxIsisStatsEntry 12 }
tmnxIsisStatsCSNPDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSNPDrop indicates the number of
Complete Sequence Number PDUs dropped by this instance."
::= { tmnxIsisStatsEntry 13 }
tmnxIsisStatsCSNPSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSNPSent indicates the number of
Complete Sequence Number PDUs sent out by this instance."
::= { tmnxIsisStatsEntry 14 }
tmnxIsisStatsCSNPRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSNPRetrans indicates the number
of Complete Sequence Number PDUs that had to be retransmitted by this
instance."
::= { tmnxIsisStatsEntry 15 }
tmnxIsisStatsPSNPRecd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPSNPRecd indicates the number of
Partial Sequence Number PDUs received by this instance."
::= { tmnxIsisStatsEntry 16 }
tmnxIsisStatsPSNPDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPSNPDrop indicates the number of
Partial Sequence Number PDUs dropped by this instance."
::= { tmnxIsisStatsEntry 17 }
tmnxIsisStatsPSNPSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPSNPSent indicates the number of
Partial Sequence Number PDUs sent out by this instance."
::= { tmnxIsisStatsEntry 18 }
tmnxIsisStatsPSNPRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPSNPRetrans indicates the number
of Partial Sequence Number PDUs that had to be retransmitted by this
instance."
::= { tmnxIsisStatsEntry 19 }
tmnxIsisStatsUnknownRecd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsUnknownRecd indicates the number
of unknown packets received by this instance."
::= { tmnxIsisStatsEntry 20 }
tmnxIsisStatsUnknownDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsUnknownDrop indicates the number
of unknown packets dropped by this instance."
::= { tmnxIsisStatsEntry 21 }
tmnxIsisStatsUnknownSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsUnknownSent indicates the number
of unknown packets sent out by this instance."
::= { tmnxIsisStatsEntry 22 }
tmnxIsisStatsUnknownRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsUnknownRetrans indicates the
number of unknown packets that had to be retransmitted by this
instance."
::= { tmnxIsisStatsEntry 23 }
tmnxIsisStatsCSPFRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSPFRequests indicates the number
of CSPF requests made to the protocol."
::= { tmnxIsisStatsEntry 24 }
tmnxIsisStatsCSPFDroppedRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSPFDroppedRequests indicates the
number of dropped CSPF requests by the protocol."
::= { tmnxIsisStatsEntry 25 }
tmnxIsisStatsCSPFPathsFound OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSPFPathsFound indicates the
number of responses to CSPF requests for which paths satisfying the
constraints were found."
::= { tmnxIsisStatsEntry 26 }
tmnxIsisStatsCSPFPathsNotFound OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsCSPFPathsNotFound indicates the
number of responses to CSPF requests for which no paths satisfying the
constraints were found."
::= { tmnxIsisStatsEntry 27 }
tmnxIsisStatsLfaRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLfaRuns indicates the number of
times loopfree-alternate calculations have been made."
::= { tmnxIsisStatsEntry 28 }
tmnxIsisStatsPartSpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPartSpfRuns indicates the number
of times Partial SPF calculations have been made."
::= { tmnxIsisStatsEntry 29 }
tmnxIsisStatsPartSpfTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPartSpfTimeStamp indicates the
timestamp when the last Partial SPF was scheduled."
::= { tmnxIsisStatsEntry 30 }
tmnxIsisStatsPartLfaRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPartLfaRuns indicates the number
of times Partial LFA calculations have been made."
::= { tmnxIsisStatsEntry 31 }
tmnxIsisStatsPartLfaTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsPartLfaTimeStamp indicates the
timestamp when the last Partial LFA was scheduled."
::= { tmnxIsisStatsEntry 32 }
tmnxIsisStatsLfaTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsLfaTimeStamp indicates the
timestamp when the last LFA was scheduled."
::= { tmnxIsisStatsEntry 33 }
tmnxIsisStatsSpfTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsSpfTimeStamp indicates the
timestamp when the last SPF was scheduled."
::= { tmnxIsisStatsEntry 34 }
tmnxIsisStatsSidLabelRangeErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisStatsSidLabelRangeErrs gives the total number of
errors for SIDs that are not within the label-range of the router."
::= { tmnxIsisStatsEntry 35 }
tmnxIsisStatsSidDupErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisStatsSidDupErrs gives the total number of errors
for SIDs which are already assigned to another prefix."
::= { tmnxIsisStatsEntry 36 }
tmnxIsisStatsRlfaRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsRlfaRuns indicates the number of
times remote-loopfree-alternate calculations have been made."
::= { tmnxIsisStatsEntry 37 }
tmnxIsisStatsRlfaTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsRlfaTimeStamp indicates the
timestamp when the last RLFA was scheduled."
::= { tmnxIsisStatsEntry 38 }
tmnxIsisStatsTiLfaRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsTiLfaRuns indicates the number of
times Topology Independent loopfree-alternate calculations have been
made."
::= { tmnxIsisStatsEntry 39 }
tmnxIsisStatsTiLfaTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisStatsTiLfaTimeStamp indicates the
timestamp when the last Topology Independent LFA was scheduled."
::= { tmnxIsisStatsEntry 40 }
tmnxIsisHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisHostTable provides the mapping of a system-id for an IS to
the hostname as provided by the system. This table may not have
mapping of all system-id to hostname as it is not mandatory to
exchange hostnames."
::= { tmnxIsisSystemObjs 4 }
tmnxIsisHostEntry OBJECT-TYPE
SYNTAX TmnxIsisHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisHostTable stores the mapping of a
system-id to a hostname."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisHostSysID
}
::= { tmnxIsisHostTable 1 }
TmnxIsisHostEntry ::= SEQUENCE
{
tmnxIsisHostSysID SystemID,
tmnxIsisHostName DisplayString
}
tmnxIsisHostSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisHostSysID specifies the system-id for
which we map the hostname in the object tmnxIsisHostName."
::= { tmnxIsisHostEntry 1 }
tmnxIsisHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisHostName indicates the mapping
hostname for the corresponding system-id."
::= { tmnxIsisHostEntry 2 }
tmnxIsisRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisRouteEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The tmnxIsisRouteTable maintains the routes learned by an instance of
IS-IS protocol for a specific multi topology id. This table is
replaced by tmnxIsisRouteNhTable."
::= { tmnxIsisSystemObjs 5 }
tmnxIsisRouteEntry OBJECT-TYPE
SYNTAX TmnxIsisRouteEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry in the tmnxIsisRouteTable stores a route for a given
instance of the IS-IS protocol for a specific multi topology id."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisRouteMtId,
tmnxIsisRouteDestType,
tmnxIsisRouteDest,
tmnxIsisRoutePrefixLength,
tmnxIsisRouteNexthopIPType,
tmnxIsisRouteNexthopIP
}
::= { tmnxIsisRouteTable 1 }
TmnxIsisRouteEntry ::= SEQUENCE
{
tmnxIsisRouteMtId Unsigned32,
tmnxIsisRouteDestType InetAddressType,
tmnxIsisRouteDest InetAddress,
tmnxIsisRoutePrefixLength InetAddressPrefixLength,
tmnxIsisRouteNexthopIPType InetAddressType,
tmnxIsisRouteNexthopIP InetAddress,
tmnxIsisRouteLevel INTEGER,
tmnxIsisRouteSpfRunNumber Counter32,
tmnxIsisRouteMetric Unsigned32,
tmnxIsisRouteType INTEGER,
tmnxIsisRouteNHopSysID SystemID,
tmnxIsisRouteTag Unsigned32,
tmnxIsisRouteBkupFlags INTEGER,
tmnxIsisRouteBkupNextHopTy INTEGER,
tmnxIsisRouteBkupNextHopType InetAddressType,
tmnxIsisRouteBkupNextHop InetAddress,
tmnxIsisRouteBkupMetric Unsigned32,
tmnxIsisRouteNextHopType TmnxInetCidrNextHopType,
tmnxIsisRouteNextHopOwner TmnxInetCidrNextHopOwner,
tmnxIsisRouteNHOwnerAuxInfo Unsigned32,
tmnxIsisRouteBkupNHType TmnxInetCidrNextHopType,
tmnxIsisRouteBkupNHOwner TmnxInetCidrNextHopOwner,
tmnxIsisRouteBkupNHOwnAxInfo Unsigned32,
tmnxIsisRouteSidFlags BITS,
tmnxIsisRouteSidValue Unsigned32,
tmnxIsisRouteStatus INTEGER
}
tmnxIsisRouteMtId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteMtId specifies the multi topology
id number for this route.
If multi-topology is not supported for the route then the value of
tmnxIsisRouteMtId should be 0."
::= { tmnxIsisRouteEntry 1 }
tmnxIsisRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteDestType specifies the IP address
type for tmnxIsisRouteDest."
::= { tmnxIsisRouteEntry 2 }
tmnxIsisRouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteDest specifies the destination IP
address of this route.
The address type of tmnxIsisRouteDest is indicated by
tmnxIsisRouteDestType."
::= { tmnxIsisRouteEntry 3 }
tmnxIsisRoutePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRoutePrefixLength specifies the prefix
length to be used with tmnxIsisRouteDest to get the network prefix."
::= { tmnxIsisRouteEntry 4 }
tmnxIsisRouteNexthopIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteNexthopIPType specifies the IP
address type for tmnxIsisRouteNexthopIP."
::= { tmnxIsisRouteEntry 5 }
tmnxIsisRouteNexthopIP OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16|20))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteNexthopIP specifies the IP
address of the nexthop for this route.
The address type of tmnxIsisRouteNexthopIP is indicated by
tmnxIsisRouteNexthopIPType"
::= { tmnxIsisRouteEntry 6 }
tmnxIsisRouteLevel OBJECT-TYPE
SYNTAX INTEGER {
level1IS (1),
level2IS (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteLevel indicates the IS-IS Level
at which the prefix was learned."
::= { tmnxIsisRouteEntry 7 }
tmnxIsisRouteSpfRunNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteSpfRunNumber indicates the run of
spf calculation in which this route was selected."
::= { tmnxIsisRouteEntry 8 }
tmnxIsisRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteMetric indicates the metric value
associated with the route.
This metric is obtained by the SPF calculations and is used by the
instance of the protocol.
For a given destination prefix, the route with the lower metric is the
shorter route."
::= { tmnxIsisRouteEntry 9 }
tmnxIsisRouteType OBJECT-TYPE
SYNTAX INTEGER {
internal (1),
external (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteType indicates the type of route
represented by this row entry."
::= { tmnxIsisRouteEntry 10 }
tmnxIsisRouteNHopSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteNHopSysID indicates the system-id
of the nexthop IS through which this route is reachable."
::= { tmnxIsisRouteEntry 11 }
tmnxIsisRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteTag indicates a 32-bit integer
route tag for this route.
A value of 0 indicates that the tag has not been set."
::= { tmnxIsisRouteEntry 12 }
tmnxIsisRouteBkupFlags OBJECT-TYPE
SYNTAX INTEGER {
none (0),
hasLfa (1)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupFlags indicates the presence
or absence of LFA next-hops.
The value 'none' indicates that no next-hop is present;
the value 'hasLfa' indicates that an LFA next-hop is present in addition
to the regular next-hop."
::= { tmnxIsisRouteEntry 13 }
tmnxIsisRouteBkupNextHopTy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
nodeProtection (1),
linkProtection (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupNextHopTy indicates the type
of protection used by the backup next-hop.
The value 'notApplicable' indicates that the backup next-hop type is
not applicable; the value 'nodeProtection' indicates that the backup
next-hop uses a node-protection mechanism; the value 'linkProtection'
indicates that the backup next-hop uses link-protection mechanism."
::= { tmnxIsisRouteEntry 14 }
tmnxIsisRouteBkupNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupNextHopType indicates the IP
address type for tmnxIsisRouteBkupNextHop."
::= { tmnxIsisRouteEntry 15 }
tmnxIsisRouteBkupNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupNextHop indicates the IP
address of a backup next-hop.
The value of tmnxIsisRouteBkupNextHop is only valid when
tmnxIsisRouteBkupFlags has a value of 'hasLfa'.
The address type of tmnxIsisRouteBkupNextHop is indicated by the value
of tmnxIsisRouteBkupNextHopType."
::= { tmnxIsisRouteEntry 16 }
tmnxIsisRouteBkupMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupMetric indicates the routing
metric for a backup route.
The semantics of this metric are determined by the routing-protocol
specified in the route's ipCidrRouteProto value.
The value of tmnxIsisRouteBkupMetric is only valid when
tmnxIsisRouteBkupFlags has a value of 'hasLfa'."
::= { tmnxIsisRouteEntry 17 }
tmnxIsisRouteNextHopType OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopType
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteNextHopType indicates the type of
next hop for this route."
::= { tmnxIsisRouteEntry 18 }
tmnxIsisRouteNextHopOwner OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopOwner
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteNextHopOwner indicates the owner
of next hop for this route."
::= { tmnxIsisRouteEntry 19 }
tmnxIsisRouteNHOwnerAuxInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteNHOwnerAuxInfo indicates the
auxiliary information for next hop owner as indicated by
tmnxIsisRouteNextHopOwner.
The value of tmnxIsisRouteNHOwnerAuxInfo indicates the tunnel id
existing for this next hop type and owner."
::= { tmnxIsisRouteEntry 20 }
tmnxIsisRouteBkupNHType OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopType
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupNHType indicates the type of
next hop for this backup route."
::= { tmnxIsisRouteEntry 21 }
tmnxIsisRouteBkupNHOwner OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopOwner
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupNHOwner indicates the owner
of next hop for this backup route."
::= { tmnxIsisRouteEntry 22 }
tmnxIsisRouteBkupNHOwnAxInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteBkupNHOwnAxInfo indicates the
auxiliary information, for next hop owner as indicated by
tmnxIsisRouteBkupNHOwner.
The value of tmnxIsisRouteBkupNHOwnAxInfo indicates the tunnel id
existing for this backup next hop type and owner."
::= { tmnxIsisRouteEntry 23 }
tmnxIsisRouteSidFlags OBJECT-TYPE
SYNTAX BITS {
bitUsed (0),
bitR (1),
bitN (2),
bitP (3),
bitE (4),
bitV (5),
bitL (6)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteSidFlags indicates the flags of a
Prefix-SID as defined by IETF segment routing.
bitUsed(0) - If set, tmnxIsisRouteSidValue is valid.
bitR (1) - Re-advertisement flag. If set, then the prefix to
which this Prefix-SID is attached, has been propagated by the
router either from another level (i.e.: from level-1 to level-2
or the opposite) or from redistribution (e.g.: from another
protocol).
bitN (2) - Node-SID flag. The N-Flag is set on Prefix-SIDs
attached to a router loopback address.
bitP (3) - no-PHP flag. If set, then the penultimate hop MUST NOT
pop the Prefix-SID before delivering the packet to the node
that advertised the Prefix-SID.
bitE (4) - Explicit-Null Flag. If set, any upstream neighbor
of the Prefix-SID originator MUST replace the Prefix-SID with
a Prefix-SID having an Explicit-NULL value (0 for IPv4 and 2 for
IPv6) before forwarding the packet.
bitV (5) - Value flag. If set, then the Prefix-SID carries a
value (instead of an index).
bitL (6) - Local Flag. If set, then the value/index carried by
the Prefix-SID has local significance."
::= { tmnxIsisRouteEntry 24 }
tmnxIsisRouteSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object tmnxIsisRouteSidValue indicates the SID label
or index for this prefix."
::= { tmnxIsisRouteEntry 25 }
tmnxIsisRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (0),
rtmAddFailed (1),
fibAddFailed (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of tmnxIsisRouteStatus indicates the reason why a route is
not active."
::= { tmnxIsisRouteEntry 26 }
tmnxIsisPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisPathTable maintains information regarding SPF calculation
for each instance of IS-IS protocol."
::= { tmnxIsisSystemObjs 6 }
tmnxIsisPathEntry OBJECT-TYPE
SYNTAX TmnxIsisPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisPathTable represents the ISIS path for
an instance, level, multi topology id, path identifier and the path
outgoing interface."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisLevel,
tmnxIsisPathMtID,
tmnxIsisPathID,
tmnxIsisPathIfIndex,
tmnxIsisPathNHopSysID
}
::= { tmnxIsisPathTable 1 }
TmnxIsisPathEntry ::= SEQUENCE
{
tmnxIsisPathMtID Unsigned32,
tmnxIsisPathID OCTET STRING,
tmnxIsisPathIfIndex InterfaceIndex,
tmnxIsisPathNHopSysID SystemID,
tmnxIsisPathMetric Unsigned32,
tmnxIsisPathSNPA SNPAAddress,
tmnxIsisPathLfaIfIndex InterfaceIndexOrZero,
tmnxIsisPathLfaNHop SystemID,
tmnxIsisPathLfaMetric Unsigned32,
tmnxIsisPathLfaType INTEGER,
tmnxIsisPathRouteType INTEGER
}
tmnxIsisPathMtID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathMtID specifies the multi-topology
id number for the path.
If multi-topology is not supported for the path then the value of
tmnxIsisPathMtID should be 0."
::= { tmnxIsisPathEntry 1 }
tmnxIsisPathID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (7))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathID specifies the path identifier
and has first 6 octets as the system-id followed by one octet of the
Lan-ID."
::= { tmnxIsisPathEntry 2 }
tmnxIsisPathIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathIfIndex specifies the ifIndex of
the outgoing interface for the path."
::= { tmnxIsisPathEntry 3 }
tmnxIsisPathNHopSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathNHopSysID specifies the system-id
of the nexthop and is used to reference the nexthop for this route."
::= { tmnxIsisPathEntry 4 }
tmnxIsisPathMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathMetric indicates the metric
assigned to this path entry after SPF calculations.
The lower the metric value, the shorter is the path and hence more
preferred by the protocol."
::= { tmnxIsisPathEntry 5 }
tmnxIsisPathSNPA OBJECT-TYPE
SYNTAX SNPAAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathSNPA indicates the subnet point of
attachment for this path."
::= { tmnxIsisPathEntry 6 }
tmnxIsisPathLfaIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathLfaIfIndex indicates the
loopfree-alternate ifIndex of the outgoing interface for the path."
::= { tmnxIsisPathEntry 7 }
tmnxIsisPathLfaNHop OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathLfaNHop indicates the
loopfree-alternate nexthop and is referenced by the system-id."
::= { tmnxIsisPathEntry 8 }
tmnxIsisPathLfaMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathLfaMetric indicates the metric
assigned to this entry which are a result of loopfree-alternate
calculations.
The lower the metric value, the shorter is the path and hence more
preferred by the protocol."
::= { tmnxIsisPathEntry 9 }
tmnxIsisPathLfaType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
nodeLink (1),
pathLink (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathLfaType indicates the type of
route represented by this row entry."
::= { tmnxIsisPathEntry 10 }
tmnxIsisPathRouteType OBJECT-TYPE
SYNTAX INTEGER {
spf (0),
lfa (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPathRouteType indicates whether a
backup route exists for this row entry."
::= { tmnxIsisPathEntry 11 }
tmnxIsisLSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisLSPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisLSPTable maintain information regarding all the LSPs in
the LSP database of each instance of IS-IS protocol for a given level."
::= { tmnxIsisSystemObjs 7 }
tmnxIsisLSPEntry OBJECT-TYPE
SYNTAX TmnxIsisLSPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisLSPTable represents an LSP in the LSP
database."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisLevel,
tmnxIsisLSPId
}
::= { tmnxIsisLSPTable 1 }
TmnxIsisLSPEntry ::= SEQUENCE
{
tmnxIsisLSPId OCTET STRING,
tmnxIsisLSPSeq Counter32,
tmnxIsisLSPChecksum Integer32,
tmnxIsisLSPLifetimeRemain Integer32,
tmnxIsisLSPVersion Integer32,
tmnxIsisLSPPktType Integer32,
tmnxIsisLSPPktVersion Integer32,
tmnxIsisLSPMaxArea Integer32,
tmnxIsisLSPSysIdLen Integer32,
tmnxIsisLSPAttributes Integer32,
tmnxIsisLSPUsedLen Integer32,
tmnxIsisLSPAllocLen Integer32,
tmnxIsisLSPBuff OCTET STRING,
tmnxIsisLSPZeroRLT TruthValue
}
tmnxIsisLSPId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPId specifies the LSP Id and is
given in the format as 6 octets of adjacency system-id followed by 1
octet Lan-ID and 1 octet LSP Number."
::= { tmnxIsisLSPEntry 1 }
tmnxIsisLSPSeq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPSeq indicates the sequence number
of an LSP and is a four byte quantity that represents the version of
an LSP.
The higher the sequence number, the more up to date the information.
The sequence number is always incremented by the system that
originated the LSP and ensures that there is only one version of that
LSP in the entire network."
::= { tmnxIsisLSPEntry 2 }
tmnxIsisLSPChecksum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPChecksum indicates the checksum of
contents of LSP from the SourceID field in the LSP till the end.
The checksum is computed using the Fletcher checksum algorithm. "
::= { tmnxIsisLSPEntry 3 }
tmnxIsisLSPLifetimeRemain OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPLifetimeRemain indicates the
Remaining lifetime of this LSP and is a decrementing counter that
decrements in seconds starting from the value as received in the LSP
if not self-originated OR from tmnxIsisLspLifetime for self originated
LSPs.
When the remaining lifetime becomes zero, the contents of the LSP
should not be considered for SPF calculation."
::= { tmnxIsisLSPEntry 4 }
tmnxIsisLSPVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPVersion indicates the version of
the ISIS protocol that has generated the LSP"
::= { tmnxIsisLSPEntry 5 }
tmnxIsisLSPPktType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPPktType indicates the packet type
for instance Hello PDUs, LSPs, CSNPs OR PSNPs at both IS-IS protocol
levels i.e. L1 and L2 as maintained in tmnxIsisLSPPktType."
::= { tmnxIsisLSPEntry 6 }
tmnxIsisLSPPktVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPPktVersion indicates the version of
the ISIS protocol that has generated the Packet."
::= { tmnxIsisLSPEntry 7 }
tmnxIsisLSPMaxArea OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPMaxArea indicates the maximum
number of areas supported by the originator of the LSP.
A value of 0 for tmnxIsisLSPMaxArea indicates a default of 3 areas. "
::= { tmnxIsisLSPEntry 8 }
tmnxIsisLSPSysIdLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPSysIdLen indicates the length of
the system-id as used by the originator."
::= { tmnxIsisLSPEntry 9 }
tmnxIsisLSPAttributes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPAttributes indicates the attributes
associated with the LSP and these include the attached bit, overload
bit, IS type of the system originating the LSP and the partition
repair capability.
The attached bit and the overload bit are of significance only when
present in the LSP numbered zero and should be ignored on receipt in
any other LSP."
::= { tmnxIsisLSPEntry 10 }
tmnxIsisLSPUsedLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPUsedLen indicates the used length
for the LSP.
For an LSP that is not self originated, the used length is always
equal to tmnxIsisLSPAllocLen; for self originated LSPs, the used
length is less than or equal to tmnxIsisLSPAllocLen."
::= { tmnxIsisLSPEntry 11 }
tmnxIsisLSPAllocLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPAllocLen indicates the length
allocated for the LSP to be stored."
::= { tmnxIsisLSPEntry 12 }
tmnxIsisLSPBuff OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (27..9190))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPBuff indicates the LSP as existing
in the LSP database."
::= { tmnxIsisLSPEntry 13 }
tmnxIsisLSPZeroRLT OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLSPZeroRLT indicates the LSP state if
it has once reached zero remaining lifetime.
If this object is 'true' then the object tmnxIsisLSPLifetimeRemain
will maintain the time remaining after which this LSP will be
discarded."
::= { tmnxIsisLSPEntry 14 }
tmnxIsisSpfLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSpfLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSpfLogTable maintains information regarding SPF runs for
each instance of IS-IS protocol.
There is a maximum of 20 log entries stored per IS-IS protocol
instance."
::= { tmnxIsisSystemObjs 8 }
tmnxIsisSpfLogEntry OBJECT-TYPE
SYNTAX TmnxIsisSpfLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry maintains log information about a specific SPF run made on
a particular IS-IS protocol instance."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisSpfLogTimeStamp
}
::= { tmnxIsisSpfLogTable 1 }
TmnxIsisSpfLogEntry ::= SEQUENCE
{
tmnxIsisSpfLogTimeStamp TimeStamp,
tmnxIsisSpfLogRunTime TimeTicks,
tmnxIsisSpfLogL1Nodes Unsigned32,
tmnxIsisSpfLogL2Nodes Unsigned32,
tmnxIsisSpfLogEventCount Unsigned32,
tmnxIsisSpfLogLastTriggerLSPId OCTET STRING,
tmnxIsisSpfLogTriggerReason BITS,
tmnxIsisSpfLogType INTEGER
}
tmnxIsisSpfLogTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogTimeStamp specifies the
timestamp when the SPF run started on the system."
::= { tmnxIsisSpfLogEntry 1 }
tmnxIsisSpfLogRunTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogRunTime indicates the time (in
centiseconds) required to complete the SPF run."
::= { tmnxIsisSpfLogEntry 2 }
tmnxIsisSpfLogL1Nodes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogL1Nodes indicates the number of
level 1 nodes involved in the SPF run."
::= { tmnxIsisSpfLogEntry 3 }
tmnxIsisSpfLogL2Nodes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogL2Nodes indicates the number of
level 2 nodes involved in the SPF run."
::= { tmnxIsisSpfLogEntry 4 }
tmnxIsisSpfLogEventCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogEventCount indicates the number
of SPF events that triggered the SPF calculation."
::= { tmnxIsisSpfLogEntry 5 }
tmnxIsisSpfLogLastTriggerLSPId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogLastTriggerLSPId indicates the
LSPId of the last LSP processed before the SPF run."
::= { tmnxIsisSpfLogEntry 6 }
tmnxIsisSpfLogTriggerReason OBJECT-TYPE
SYNTAX BITS {
newAdjacency (0),
newLSP (1),
newArea (2),
reach (3),
ecmpChanged (4),
newMetric (5),
teChanged (6),
restart (7),
lspExpired (8),
lspDbChanged (9),
lspChanged (10),
newPreference (11),
newNLPID (12),
manualRun (13),
adminTagChanged (14),
tunnelChanged (15),
throttleEnd (16),
lfaChanged (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogTriggerReason indicates the
reasons that triggered this SPF run.
newAdjacency (0) - a new adjacency was formed.
newLSP (1) - a new LSP was received.
newArea (2) - a new area was joined.
reach (3) - a new prefix can be reached.
ecmpChanged (4) - the number of ecmp routes to a destination
changed.
newMetric (5) - a route has a new metric.
teChanged (6) - traffic engineering changed.
restart (7) - the IS-IS router was restarted.
lspExpired (8) - an LSP expired.
lspDbChanged (9) - the IS-IS LSP database was cleared.
lspChanged (10) - an LSP changed.
newPreference (11) - a route preference changed.
newNLPID (12) - a Network Layer Protocol was added to the
IS-IS router protocol set.
manualRun (13) - Manual request issued.
adminTagChanged (14)- admin tag has changed.
tunnelChanged (15) - list of tunnels has changed.
throttleEnd (16) - throttling of SPF ended.
lfaChanged (17) - lfa changed."
::= { tmnxIsisSpfLogEntry 7 }
tmnxIsisSpfLogType OBJECT-TYPE
SYNTAX INTEGER {
regular (0),
lfa (1),
partialSpf (2),
partialLfa (3),
remoteLfa (4),
tiLfa (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSpfLogType indicates the type of SPF
calculation."
::= { tmnxIsisSpfLogEntry 8 }
tmnxIsisSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSummaryTable maintains the summary prefixes for a specific
instance of the IS-IS protocol."
::= { tmnxIsisSystemObjs 9 }
tmnxIsisSummaryEntry OBJECT-TYPE
SYNTAX TmnxIsisSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisSummaryTable stores a summary prefix for
a specific instance of the IS-IS protocol."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisSummPrefixType,
tmnxIsisSummPrefix,
tmnxIsisSummPrefixLength
}
::= { tmnxIsisSummaryTable 1 }
TmnxIsisSummaryEntry ::= SEQUENCE
{
tmnxIsisSummPrefixType InetAddressType,
tmnxIsisSummPrefix InetAddress,
tmnxIsisSummPrefixLength InetAddressPrefixLength,
tmnxIsisSummRowStatus RowStatus,
tmnxIsisSummLevel INTEGER,
tmnxIsisSummRouteTag Unsigned32
}
tmnxIsisSummPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSummPrefixType specifies the IP
address type of tmnxIsisSummPrefix."
::= { tmnxIsisSummaryEntry 1 }
tmnxIsisSummPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSummPrefix specifies the prefix for
this summary address entry."
::= { tmnxIsisSummaryEntry 2 }
tmnxIsisSummPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSummPrefixLength specifies the prefix
length to be used with tmnxIsisSummPrefix to get the network prefix."
::= { tmnxIsisSummaryEntry 3 }
tmnxIsisSummRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSummRowStatus specifies the row status
used to create and delete entries in the tmnxIsisSummaryTable."
::= { tmnxIsisSummaryEntry 4 }
tmnxIsisSummLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2),
level1L2 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSummLevel specifies the IS-IS Level
from which the prefix should be summarized."
DEFVAL { level1L2 }
::= { tmnxIsisSummaryEntry 5 }
tmnxIsisSummRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSummRouteTag specifies a 32-bit
integer tag for the ISIS summary address and can be used to apply
administrative policy.
A value of 0 indicates that the tag has not been set."
DEFVAL { 0 }
::= { tmnxIsisSummaryEntry 6 }
tmnxIsisLfaTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisLfaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisLfaTable maintains information on loopfree-alternate (LFA)
coverage for each instance of IS-IS protocol."
::= { tmnxIsisSystemObjs 10 }
tmnxIsisLfaEntry OBJECT-TYPE
SYNTAX TmnxIsisLfaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisLfaTable represents information on LFA
coverage for various topologies of the system."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisLevel,
tmnxIsisLfaFamilyCoverage
}
::= { tmnxIsisLfaTable 1 }
TmnxIsisLfaEntry ::= SEQUENCE
{
tmnxIsisLfaFamilyCoverage INTEGER,
tmnxIsisLfaNodesCovered Unsigned32,
tmnxIsisLfaTotalNodes Unsigned32,
tmnxIsisLfaNodeCoverage Unsigned32,
tmnxIsisLfaIPv4NodesCovered Unsigned32,
tmnxIsisLfaIPv4TotalNodes Unsigned32,
tmnxIsisLfaIPv4Coverage Unsigned32,
tmnxIsisLfaIPv6NodesCovered Unsigned32,
tmnxIsisLfaIPv6TotalNodes Unsigned32,
tmnxIsisLfaIPv6Coverage Unsigned32
}
tmnxIsisLfaFamilyCoverage OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (0),
ipv6 (1),
ipv4Mcast (2),
ipv6Mcast (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaFamilyCoverage specifies the multi
topology (MTs) for which LFA coverage has been computed.
Possible values are:
ipv4(0) - indicates MT0 or standard topology
ipv6(1) - indicates MT2 or IPv6 routing topology
ipv4Mcast(2) - indicates MT3 or IPv4 multicast routing topology
ipv6Mcast(3) - indicates MT4 or IPv6 multicast routing topology."
::= { tmnxIsisLfaEntry 1 }
tmnxIsisLfaNodesCovered OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaNodesCovered indicates in absolute
numbers how much LFA coverage is being obtained for the available
routes."
::= { tmnxIsisLfaEntry 2 }
tmnxIsisLfaTotalNodes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaTotalNodes indicates in absolute
numbers how much LFA coverage can be obtained for the available
routes."
::= { tmnxIsisLfaEntry 3 }
tmnxIsisLfaNodeCoverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaNodeCoverage indicates how much LFA
coverage is being obtained for the set of available nodes."
::= { tmnxIsisLfaEntry 4 }
tmnxIsisLfaIPv4NodesCovered OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaIPv4NodesCovered indicates in
absolute numbers how much LFA coverage is being obtained for the
available IPv4 routes."
::= { tmnxIsisLfaEntry 5 }
tmnxIsisLfaIPv4TotalNodes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaIPv4TotalNodes indicates in
absolute numbers how much LFA coverage can be obtained for the
available IPv4 routes."
::= { tmnxIsisLfaEntry 6 }
tmnxIsisLfaIPv4Coverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaIPv4Coverage indicates how much LFA
coverage is being obtained for the available IPv4 routes."
::= { tmnxIsisLfaEntry 7 }
tmnxIsisLfaIPv6NodesCovered OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaIPv6NodesCovered indicates in
absolute numbers how much LFA coverage is being obtained for available
IPv6 routes."
::= { tmnxIsisLfaEntry 8 }
tmnxIsisLfaIPv6TotalNodes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaIPv6TotalNodes indicates in
absolute numbers how much LFA coverage can be obtained for the
available IPv6 routes."
::= { tmnxIsisLfaEntry 9 }
tmnxIsisLfaIPv6Coverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLfaIPv6Coverage indicates how much LFA
coverage is being obtained for the available IPv6 routes."
::= { tmnxIsisLfaEntry 10 }
tmnxIsisExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisExtTable provides an extension of the tmnxIsisTable."
::= { tmnxIsisSystemObjs 11 }
tmnxIsisExtEntry OBJECT-TYPE
SYNTAX TmnxIsisExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in tmnxIsisExtTable represents additional columns for
attributes specific to the Nokia SROS series implementation for the
ISIS configuration table."
AUGMENTS { tmnxIsisEntry }
::= { tmnxIsisExtTable 1 }
TmnxIsisExtEntry ::= SEQUENCE
{
tmnxIsisExLastChanged TimeStamp,
tmnxIsisLFAExcludePolicy1 TNamedItemOrEmpty,
tmnxIsisLFAExcludePolicy2 TNamedItemOrEmpty,
tmnxIsisLFAExcludePolicy3 TNamedItemOrEmpty,
tmnxIsisLFAExcludePolicy4 TNamedItemOrEmpty,
tmnxIsisLFAExcludePolicy5 TNamedItemOrEmpty,
tmnxIsisPrefixSidRangeType INTEGER,
tmnxIsisPrefixSidRangeStartLabel Unsigned32,
tmnxIsisPrefixSidRangeMaxIdx Unsigned32,
tmnxIsisSrAdminState TmnxAdminState,
tmnxIsisTunnelTablePreference Unsigned32,
tmnxIsisRibPriorityListHigh TNamedItemOrEmpty,
tmnxIsisRibPriorityListHighTag Unsigned32,
tmnxIsisTunnelMtu Unsigned32,
tmnxIsisMaxPqCost Unsigned32,
tmnxIsisIgnoreNarrowMetric TruthValue,
tmnxIsisPoiTlv TmnxEnabledDisabled,
tmnxIsisSystemId SystemID,
tmnxIsisPrefixLimit Unsigned32,
tmnxIsisPfxLimitOverloadTimeout Unsigned32,
tmnxIsisPrefixLimitThreshold Unsigned32,
tmnxIsisPrefixLimitLogOnly TruthValue,
tmnxIsisPfxLimitOverloadTimeLeft Unsigned32,
tmnxIsisImportPolicy1 TNamedItemOrEmpty,
tmnxIsisImportPolicy2 TNamedItemOrEmpty,
tmnxIsisImportPolicy3 TNamedItemOrEmpty,
tmnxIsisImportPolicy4 TNamedItemOrEmpty,
tmnxIsisImportPolicy5 TNamedItemOrEmpty,
tmnxIsisSrAdjSidHold Unsigned32,
tmnxIsisSrExportTunnelTableProt INTEGER,
tmnxIsisDatabaseExport TmnxEnabledDisabled,
tmnxIsisDbExportIdentifierSet TruthValue,
tmnxIsisDbExportIdentifierLow Unsigned32,
tmnxIsisDbExportIdentifierHigh Unsigned32,
tmnxIsisBgpLsIdentifierSet TruthValue,
tmnxIsisBgpLsIdentifier Unsigned32,
tmnxIsisOverloadExportInterlevel TruthValue,
tmnxIsisOverloadExportExternal TruthValue,
tmnxIsisStandardMultiInstance TruthValue,
tmnxIsisDbAsn InetAutonomousSystemNumber,
tmnxIsisSrEntropyLabel INTEGER,
tmnxIsisTiLfa TruthValue,
tmnxIsisMaxSrFrrLabels Unsigned32,
tmnxIsisPrefixAttributesTlv TmnxEnabledDisabled,
tmnxIsisLspRefreshHalfLifetime TruthValue,
tmnxIsisOverrideTunnelElc INTEGER,
tmnxIsisSrlbReservedLblBlockName TLNamedItemOrEmpty,
tmnxIsisRemoteLfaNodeProtect TruthValue,
tmnxIsisRemoteLfaMaxPqNodes Unsigned32,
tmnxIsisTiLfaNodeProtect TruthValue,
tmnxIsisLspMinRemainingLifetime Unsigned32,
tmnxIsisReferenceBwU64High TmnxHigh32,
tmnxIsisReferenceBwU64Low TmnxLow32,
tmnxIsisEgressStatsNodeSid TruthValue,
tmnxIsisEgressStatsAdjSid TruthValue,
tmnxIsisEgressStatsAdjSet TruthValue,
tmnxIsisIngressStatsNodeSid TruthValue,
tmnxIsisIngressStatsAdjSid TruthValue,
tmnxIsisIngressStatsAdjSet TruthValue,
tmnxIsisTEIpv6 TruthValue,
tmnxIsisTEApplicationLinkAttr TruthValue,
tmnxIsisTEApplLegacy TruthValue,
tmnxIsisOperIpv6TERouterIdType InetAddressType,
tmnxIsisOperIpv6TERouterId InetAddress,
tmnxIsisSrMicroLoopAvoidance TruthValue,
tmnxIsisSrMicroLoopAvdFibDelay Unsigned32,
tmnxIsisSrClassForwarding TruthValue,
tmnxIsisLoopfreeAltAugmRteTable TruthValue
}
tmnxIsisExLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisExLastChanged indicates the sysUpTime when a
configurable object in this row was last modified."
::= { tmnxIsisExtEntry 1 }
tmnxIsisLFAExcludePolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLFAExcludePolicy1 is the name of the first policy
from which prefixes are excluded which match on the ISIS tag. Prefixes
excluded from LFA (Loopfree Alternative) this way will not be used in
the LFA calculation, regardless of its priority."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 2 }
tmnxIsisLFAExcludePolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLFAExcludePolicy2 is the name of the second
policy from which prefixes are excluded which match on the ISIS tag.
Prefixes excluded from LFA (Loopfree Alternative) this way will not be
used in the LFA calculation, regardless of its priority."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 3 }
tmnxIsisLFAExcludePolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLFAExcludePolicy3 is the name of the third policy
from which prefixes are excluded which match on the ISIS tag. Prefixes
excluded from LFA (Loopfree Alternative) this way will not be used in
the LFA calculation, regardless of its priority."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 4 }
tmnxIsisLFAExcludePolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLFAExcludePolicy4 is the name of the fourth
policy from which prefixes are excluded which match on the ISIS tag.
Prefixes excluded from LFA (Loopfree Alternative) this way will not be
used in the LFA calculation, regardless of its priority."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 5 }
tmnxIsisLFAExcludePolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisLFAExcludePolicy5 is the name of the fifth policy
from which prefixes are excluded which match on the ISIS tag. Prefixes
excluded from LFA (Loopfree Alternative) this way will not be used in
the LFA calculation, regardless of its priority."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 6 }
tmnxIsisPrefixSidRangeType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
global (1),
local (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisPrefixSidRangeType specifies whether global or
local operation mode is selected."
DEFVAL { none }
::= { tmnxIsisExtEntry 7 }
tmnxIsisPrefixSidRangeStartLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..524287)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisPrefixSidRangeStartLabel specifies the local
label starting offset value."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 8 }
tmnxIsisPrefixSidRangeMaxIdx OBJECT-TYPE
SYNTAX Unsigned32 (0..524287)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisPrefixSidRangeMaxIdx specifies the maximum local
SID index that can be used."
DEFVAL { 1 }
::= { tmnxIsisExtEntry 9 }
tmnxIsisSrAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSrAdminState specifies the desired
administrative state of Segment Routing for this IS-IS instance."
DEFVAL { outOfService }
::= { tmnxIsisExtEntry 10 }
tmnxIsisTunnelTablePreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTunnelTablePreference specifies the preference
value for TTM tunnels in this IS-IS instance."
DEFVAL { 11 }
::= { tmnxIsisExtEntry 11 }
tmnxIsisRibPriorityListHigh OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisRibPriorityListHigh specifies the name of the
prefix list from which prefixes are prioritised for rib update."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 12 }
tmnxIsisRibPriorityListHighTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisRibPriorityListHighTag specifies a 32-bit integer
tag for rib update.
A value of 0 indicates that the tag has not been set."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 13 }
tmnxIsisTunnelMtu OBJECT-TYPE
SYNTAX Unsigned32 (0 | 512..9786)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTunnelMtu specifies the tunnel MTU size used for
segment routing.
A value of 0 results in using the MTU of the nexthop, a value in the
range of 512..9198 will override this."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 14 }
tmnxIsisMaxPqCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisMaxPqCost specifies the maximum cost of a
destination node during reverse SPF calculation.
The value of tmnxIsisMaxPqCost is only valid when the objects
tmnxIsisLoopfreeAlternate and tmnxIsisRemoteLoopfreeAlternate both
have the value 'true'."
DEFVAL { 4261412864 }
::= { tmnxIsisExtEntry 15 }
tmnxIsisIgnoreNarrowMetric OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIgnoreNarrowMetric specifies whether
links with narrow metrics are ignored or not in its SPF calculations
when wide-metrics is enabled.
If the value of tmnxIsisIgnoreNarrowMetric is set to 'true' IS-IS is
forced to ignore links with narrow metrics when wide-metrics support
has been enabled."
DEFVAL { false }
::= { tmnxIsisExtEntry 16 }
tmnxIsisPoiTlv OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPoiTlv specifies whether Purge
Originator Identification (POI) TLV has been enabled or disabled for
this ISIS instance.
When the value of tmnxIsisPoiTlv is 'enabled', each ISIS instance that
generate a purge should include the POI TLV in the purge with its own
system ID.
When the value of tmnxIsisPoiTlv is 'enabled' and the ISIS instance
receives a purge that doesn't include the POI TLV, then it should add
the POI TLV with both its own system ID and the system ID of the ISIS
instance from which it received the purge."
DEFVAL { disabled }
::= { tmnxIsisExtEntry 17 }
tmnxIsisSystemId OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSystemId specifies the ID for this
instance of the Integrated IS-IS protocol. This value is appended to
each of the instance's area addresses to form the Network Entity
Titles valid for this instance. The derivation of a value for this
object is implementation-specific. Some implementations may assign
values and not permit write, others may require the value to be set
manually on Nokia 7xxx series systems 14.0 release."
::= { tmnxIsisExtEntry 18 }
tmnxIsisPrefixLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixLimit specifies the maximum
number of prefixes for this IS-IS instance.
If the number of prefixes exceeds this limit, IS-IS goes into
overload.
A value of 0 indicates no limit."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 19 }
tmnxIsisPfxLimitOverloadTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPfxLimitOverloadTimeout specifies the
maximum timeout in seconds we go into overload when
tmnxIsisPrefixLimit is reached.
A value of 0 indicates indefinite."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 20 }
tmnxIsisPrefixLimitThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixLimitThreshold specifies the
percentage of the tmnxIsisPrefixLimit, at which a warning log message
and SNMP notification would be sent.
This would only be a warning and additional prefixes will be learned
up to 100% of tmnxIsisPrefixLimit.
A value of 0 indicates that tmnxIsisPrefixLimitThreshold is disabled
and no log message or SNMP notification will be sent."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 21 }
tmnxIsisPrefixLimitLogOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixLimitLogOnly specifies whether
IS-IS should go into overload when tmnxIsisPrefixLimit is reached.
If the value of tmnxIsisPrefixLimitLogOnly is set to 'true', IS-IS
will only sent a trap and will not go in overload when
tmnxIsisPrefixLimit is reached; if the value of
tmnxIsisPrefixLimitLogOnly is set to 'false' IS-IS will go in overload
when tmnxIsisPrefixLimit is reached."
DEFVAL { false }
::= { tmnxIsisExtEntry 22 }
tmnxIsisPfxLimitOverloadTimeLeft OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1800)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPfxLimitOverloadTimeLeft indicates the
remaining time in seconds before IS-IS will attempt to enter its
normal state to recover from the overload state due to prefix limit
exceeded.
The value of 0 implies that the system is either not in overload or
indefinitely in overload state."
::= { tmnxIsisExtEntry 23 }
tmnxIsisImportPolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisImportPolicy1 specifies the name of
the first policy to be used for determining which routes are imported
from IS-IS into the routing table .
If no import policy is defined, all IS-IS routes will be imported into
the routing table.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The import policy name list, tmnxIsisImportPolicy1 through
tmnxIsisImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 24 }
tmnxIsisImportPolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisImportPolicy2 specifies the name of
the second policy to be used for determining which routes are imported
from IS-IS into the routing table .
If no import policy is defined, all IS-IS routes will be imported into
the routing table.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The import policy name list, tmnxIsisImportPolicy1 through
tmnxIsisImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 25 }
tmnxIsisImportPolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisImportPolicy3 specifies the name of
the third policy to be used for determining which routes are imported
from IS-IS into the routing table .
If no import policy is defined, all IS-IS routes will be imported into
the routing table.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The import policy name list, tmnxIsisImportPolicy1 through
tmnxIsisImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 26 }
tmnxIsisImportPolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisImportPolicy4 specifies the name of
the fourth policy to be used for determining which routes are imported
from IS-IS into the routing table .
If no import policy is defined, all IS-IS routes will be imported into
the routing table.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The import policy name list, tmnxIsisImportPolicy1 through
tmnxIsisImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 27 }
tmnxIsisImportPolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisImportPolicy5 specifies the name of
the fifth policy to be used for determining which routes are imported
from IS-IS into the routing table .
If no import policy is defined, all IS-IS routes will be imported into
the routing table.
If multiple policy names are specified, the policies are evaluated in
the order they are specified and the first policy that matches will be
applied.
The import policy name list, tmnxIsisImportPolicy1 through
tmnxIsisImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 28 }
tmnxIsisSrAdjSidHold OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSrAdjSidHold specifies the adjacency
SID hold time in seconds."
DEFVAL { 15 }
::= { tmnxIsisExtEntry 29 }
tmnxIsisSrExportTunnelTableProt OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ldp (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSrExportTunnelTableProt specifies the
protocol Segment Routing is stitched to.
If the value of tmnxIsisSrExportTunnelTableProt is none (0), ISIS will
not export tunnels from the Tunnel Table Manager (TTM).
If the value of tmnxIsisSrExportTunnelTableProt is ldp (1), ISIS will
export LDP tunnels from TTM to the Segment Routing (SR)."
DEFVAL { none }
::= { tmnxIsisExtEntry 30 }
tmnxIsisDatabaseExport OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisDatabaseExport specifies whether
database export has been enabled or disabled for this ISIS instance.
When the value of tmnxIsisDatabaseExport is 'enabled', ISIS will
redistribute LSDB via segment routing TE-DB into NLRI format."
DEFVAL { disabled }
::= { tmnxIsisExtEntry 31 }
tmnxIsisDbExportIdentifierSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisDbExportIdentifierSet specifies
whether to use the values of tmnxIsisDbExportIdentifierLow and
tmnxIsisDbExportIdentifierHigh or not.
When set to true(1), the values of tmnxIsisDbExportIdentifierLow and
tmnxIsisDbExportIdentifierHigh are used to uniquely identify the IGP
instance in the BGP-LS NLRI.
When set to false, the identifier in the BGP-LS NLRI defaults to the
IGP instance number assigned by SROS."
DEFVAL { false }
::= { tmnxIsisExtEntry 32 }
tmnxIsisDbExportIdentifierLow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisDbExportIdentifierLow specifies the
lower 32 bits of the unique identifier of the IGP instance in the
BGP-LS NLRI.
The value of this object is ignored when the object
tmnxIsisDbExportIdentifierSet is false."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 33 }
tmnxIsisDbExportIdentifierHigh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisDbExportIdentifierHigh specifies the
upper 32 bits of the unique identifier of the IGP instance in the
BGP-LS NLRI.
The value of this object is ignored when the object
tmnxIsisDbExportIdentifierSet is false."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 34 }
tmnxIsisBgpLsIdentifierSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisBgpLsIdentifierSet specifies whether
to use the value of tmnxIsisBgpLsIdentifier or not.
When set to true(1), the value of tmnxIsisBgpLsIdentifier is used to
identify the BGP-LS in the BGP-LS NLRI.
When set to false, no BGP-LS identifier is sent in the BGP-LS NLRI."
DEFVAL { false }
::= { tmnxIsisExtEntry 35 }
tmnxIsisBgpLsIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisBgpLsIdentifier specifies the BGP-LS
identifier that is sent in the BGP-LS NLRI.
The BGP-LS identifier is used along with the ASN to correlate the
BGP-LS NLRI advertisements of multiple BGP-LS speakers of the same IGP
domain.
The value of this object is ignored when the object
tmnxIsisBgpLsIdentifierSet is false."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 36 }
tmnxIsisOverloadExportInterlevel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisOverloadExportInterlevel would enable the
advertisement of ISIS interlevel routes when the system goes into
overload state.
When the value is set to 'true', the system will advertise the ISIS
interlevel routes while it is in overload state.
When the value is set to 'false', the system will suppress the ISIS
interlevel routes while it is in overload state."
DEFVAL { false }
::= { tmnxIsisExtEntry 37 }
tmnxIsisOverloadExportExternal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisOverloadExportExternal would enable the
advertisement of ISIS external routes originated on the same node when
the system goes into overload state.
When the value is set to 'true', the system will advertise the ISIS
external routes originated on the same node while it is in overload
state.
When the value is set to 'false', the system will suppress the ISIS
external routes originated on the same node while it is in overload
state."
DEFVAL { false }
::= { tmnxIsisExtEntry 38 }
tmnxIsisStandardMultiInstance OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisStandardMultiInstance controls the activation of
RFC 6822 standards-compliant IS-IS Multi-Instance (single topology)
behavior by the system.
If the value is set to 'true', then IS-IS Multi-Instance behavior is
according to the standard.
If the value is set to 'false', then IS-IS Multi-Instance behavior is
proprietary."
DEFVAL { false }
::= { tmnxIsisExtEntry 39 }
tmnxIsisDbAsn OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisDbAsn indicates the Autonomous System
Number the IGP is using during its database export.
The value from TIMETRA-VRTR-MIB::vRtrAS4Byte at the moment
tmnxIsisDatabaseExport is enabled is used as AS number.
The used AS number gets updated when the value from
ISIS-MIB::isisSysAdminState changes from off(1) to on(2) or when the
value from tmnxIsisDatabaseExport changes from disabled(2) to
enabled(1)."
::= { tmnxIsisExtEntry 40 }
tmnxIsisSrEntropyLabel OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
forceDisable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSrEntropyLabel specifies whether
processing of received entropy label capability (ELC) advertisements
is enabled or not for this ISIS instance.
When the value is set to 'enable', the system will process any
received ELC in ISIS.
When the value is set to 'force-disable', the system is forced to
ignore any received ELC in ISIS. It also prevents a user to configure
override-tunnel ELC; i.e. the object tmnxIsisOverrideTunnelElc is
ignored."
DEFVAL { enable }
::= { tmnxIsisExtEntry 41 }
tmnxIsisTiLfa OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTiLfa specifies whether Topology Independent LFA
is enabled or not.
The value of tmnxIsisTiLfa is only valid when the object
tmnxIsisLoopfreeAlternate has the value 'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 42 }
tmnxIsisMaxSrFrrLabels OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisMaxSrFrrLabels specifies the maximum number of
Segment Routing Fast-Reroute labels.
The value of tmnxIsisMaxSrFrrLabels is only valid when the objects
tmnxIsisLoopfreeAlternate and tmnxIsisTiLfa both have the value
'true'."
DEFVAL { 2 }
::= { tmnxIsisExtEntry 43 }
tmnxIsisPrefixAttributesTlv OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixAttributesTlv specifies whether
Prefix Attributes TLV has been enabled or disabled for this ISIS
instance.
When the value of tmnxIsisPrefixAttributesTlv is 'enabled', the ISIS
instance will advertise the Extended Reachability Attribute Flags as
defined in RFC7794 and process them as defined in RFC7775."
REFERENCE
"RFC7794 IS-IS Prefix Attributes for Extended IPv4 and IPv6 Reachability,
section 2.1 IPv4/IPv6 Extended Reachability Attribute Flags.
RFC7775 IS-IS Route Preference for Extended IP and IPv6 Reachability,
section 3 Types of Routes in IS-IS Supported by Extended Reachability TLVs."
DEFVAL { disabled }
::= { tmnxIsisExtEntry 44 }
tmnxIsisLspRefreshHalfLifetime OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspRefreshHalfLifetime specifies
whether the interval at which LSPs are refreshed is the half of the
value set for tmnxIsisLspLifetime.
If the value is set to true the LSPs are refreshed at the interval half of the
LSP lifetime, the value of tmnxIsisLspRefreshInterval is ignored.
If the value is set to false the LSPs are refreshed at the interval set for
tmnxIsisLspRefreshInterval."
DEFVAL { true }
::= { tmnxIsisExtEntry 45 }
tmnxIsisOverrideTunnelElc OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOverrideTunnelElc specifies whether
received entropy label capability (ELC) advertisement is overridden or
not for this ISIS instance.
When the value is set to 'enabled', the system will assume that all
ISIS nodes are capable of receiving and processing the entropy label
on segment routed tunnels.
When the value is set to 'disabled', the override is disabled; the
system will only assume entropy label capability for other ISIS nodes
if capability advertisements are received.
This override value is only applicable when tmnxIsisSrEntropyLabel is
enabled."
DEFVAL { disabled }
::= { tmnxIsisExtEntry 46 }
tmnxIsisSrlbReservedLblBlockName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSrlbReservedLblBlockName specifies the
name identifying the reserved label block (SRLB) to be used on this
ISIS instance.
The SR Local Block (SRLB) Sub-TLV contains the range of labels the
node has reserved for local SIDs.
When no reserved label block name is specified, no static labels can
be allocated.
The reserved label block name is defined by vRtrMplsReservedLblBlkName
and is the index for TIMETRA-MPLS-MIB::vRtrMplsReservedLblBlkTable."
DEFVAL { ''H }
::= { tmnxIsisExtEntry 47 }
tmnxIsisRemoteLfaNodeProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisRemoteLfaNodeProtect specifies whether Node
protection with Remote LFA is enabled or not.
The value of tmnxIsisRemoteLfaNodeProtect is only valid when the
objects tmnxIsisLoopfreeAlternate and tmnxIsisRemoteLoopfreeAlternate
both have the value 'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 48 }
tmnxIsisRemoteLfaMaxPqNodes OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisRemoteLfaMaxPqNodes specifies the maximum number
of PQ nodes for which we perform the forward SPF check to see if its
path to the destination does not go via the node which we are
protecting against.
The value of tmnxIsisRemoteLfaMaxPqNodes is only valid when the
objects tmnxIsisLoopfreeAlternate and tmnxIsisRemoteLoopfreeAlternate
both have the value 'true'."
DEFVAL { 16 }
::= { tmnxIsisExtEntry 49 }
tmnxIsisTiLfaNodeProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTiLfaNodeProtect specifies whether Node
protection with Topology Independent LFA is enabled or not.
The value of tmnxIsisTiLfaNodeProtect is only valid when the objects
tmnxIsisLoopfreeAlternate and tmnxIsisTiLfa both have the value
'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 50 }
tmnxIsisLspMinRemainingLifetime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 350..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLspMinRemainingLifetime specifies the
minimum value to which the Remaining Lifetime of the LSP can be set.
To avoid that LSPs are purged prematurely, the
tmnxIsisLspMinRemainingLifetime must be set to a value greater than or
equal to the locally configured value of tmnxIsisLspLifetime.
A value of 0 indicates that there is no minimum configured, i.e. the
Remaining Lifetime in the incoming LSP will not be changed."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 51 }
tmnxIsisReferenceBwU64High OBJECT-TYPE
SYNTAX TmnxHigh32
UNITS "kilobps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisReferenceBwU64High specifies the upper
32 bit of the reference bandwidth that needs to be used to calculate
the cost.
This value should always be set along with tmnxIsisReferenceBwU64Low,
otherwise an 'inconsistentValue' error is returned.
In order to calculate the lowest cost to reach a given destination
each configured level on each interface must have a cost.
If the reference-bandwidth is defined then the cost is calculated
using the following formula:
Cost = reference-bandwidth / bandwidth.
If the reference bandwidth is configured as Ten Gig (10,000,000,000) a
100-Mbps interface has a default metric of 100. In order for metrics
in excess of 63 to be configured wide metrics must be deployed.
A value of '0' means that the reference bandwidth is not defined."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 52 }
tmnxIsisReferenceBwU64Low OBJECT-TYPE
SYNTAX TmnxLow32
UNITS "kilobps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisReferenceBwU64Low specifies the lower
32 bit of the reference bandwidth that needs to be used to calculate
the cost.
This value should always be set along with tmnxIsisReferenceBwU64High,
otherwise an 'inconsistentValue' error is returned.
In order to calculate the lowest cost to reach a given destination
each configured level on each interface must have a cost.
If the reference-bandwidth is defined then the cost is calculated
using the following formula:
Cost = reference-bandwidth / bandwidth.
If the reference bandwidth is configured as Ten Gig (10,000,000,000) a
100-Mbps interface has a default metric of 100. In order for metrics
in excess of 63 to be configured wide metrics must be deployed.
A value of '0' means that the reference bandwidth is not defined."
DEFVAL { 0 }
::= { tmnxIsisExtEntry 53 }
tmnxIsisEgressStatsNodeSid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisEgressStatsNodeSid specifies whether egress
statistic collection on Node SIDs is enabled or not."
DEFVAL { false }
::= { tmnxIsisExtEntry 54 }
tmnxIsisEgressStatsAdjSid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisEgressStatsAdjSid specifies whether egress
statistic collection on Adjacency SIDs is enabled or not."
DEFVAL { false }
::= { tmnxIsisExtEntry 55 }
tmnxIsisEgressStatsAdjSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisEgressStatsAdjSet specifies whether egress
statistic collection on Adjacency sets is enabled or not."
DEFVAL { false }
::= { tmnxIsisExtEntry 56 }
tmnxIsisIngressStatsNodeSid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisIngressStatsNodeSid specifies whether ingress
statistic collection on Node SIDs is enabled or not."
DEFVAL { false }
::= { tmnxIsisExtEntry 57 }
tmnxIsisIngressStatsAdjSid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisIngressStatsAdjSid specifies whether ingress
statistic collection on Adjacency SIDs is enabled or not."
DEFVAL { false }
::= { tmnxIsisExtEntry 58 }
tmnxIsisIngressStatsAdjSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisIngressStatsAdjSet specifies whether ingress
statistic collection on Adjacency sets is enabled or not."
DEFVAL { false }
::= { tmnxIsisExtEntry 59 }
tmnxIsisTEIpv6 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTEIpv6 specifies whether traffic engineering (TE)
behavior for IPv6 SR-TE is enabled or not.
If the value is 'true', the ISIS instance will advertise the RFC 6119
TLVs and sub-TLVs: IPv6 TE router ID TLV, IPv6 interface Address
sub-TLV and Neighbor Address sub-TLV, or Link-Local Interface
Identifiers sub-TLV if the interface has no global unicast IPv6
address.
The value of tmnxIsisTEIpv6 is only valid when the object
tmnxIsisTrafficEng has the value 'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 60 }
tmnxIsisTEApplicationLinkAttr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTEApplicationLinkAttr specifies whether the
traffic engineering (TE) attributes of each link are advertised on a
per application basis or not.
If the value is 'true', the ISIS instance will advertise the TE
attributes for the SR-TE and RSVP-TE application separately in the
sub-sub-TLVs of the application attribute sub-TLV. The legacy TE
attributes will also be advertised if the object tmnxIsisTEApplLegacy
is 'true'.
The value of tmnxIsisTEApplicationLinkAttr is only valid when the
object tmnxIsisTrafficEng has the value 'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 61 }
tmnxIsisTEApplLegacy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisTEApplLegacy specifies whether the legacy mode of
advertising traffic engineering (TE) attributes is enabled or not.
If the value is 'true', the ISIS instance will advertise the legacy TE
attributes for the application.
The value of tmnxIsisTEApplicationLinkAttr is only valid when the
objects tmnxIsisTrafficEng and tmnxIsisTEApplicationLinkAttr both have
the value 'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 62 }
tmnxIsisOperIpv6TERouterIdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisOperIpv6TERouterIdType indicates the IP address
type of tmnxIsisOperIpv6TERouterId"
::= { tmnxIsisExtEntry 63 }
tmnxIsisOperIpv6TERouterId OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisOperIpv6TERouterId indicates the
Traffic Engineering Router ID."
::= { tmnxIsisExtEntry 64 }
tmnxIsisSrMicroLoopAvoidance OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisSrMicroLoopAvoidance specifies whether
micro-loops avoidance during the convergence is enabled or not.
If the value is 'true', the ISIS instance will use the Loop Free SR
path for the time specified by the object
tmnxIsisSrMicroLoopAvdFibDelay."
DEFVAL { false }
::= { tmnxIsisExtEntry 65 }
tmnxIsisSrMicroLoopAvdFibDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..300)
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSrMicroLoopAvdFibDelay specifies the
time during which the system would continue to use the loop free
alternate path when the micro-loops avoidance is enabled."
DEFVAL { 15 }
::= { tmnxIsisExtEntry 66 }
tmnxIsisSrClassForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisSrClassForwarding specifies whether Class Based
Forwarding is enabled or not.
If the value is 'true', Class Based Forwarding with ECMP for SR-ISIS
over RSVP-TE LSPs as IGP shortcuts is enabled."
DEFVAL { false }
::= { tmnxIsisExtEntry 67 }
tmnxIsisLoopfreeAltAugmRteTable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisLoopfreeAltAugmRteTable specifies
whether detailed LFA information should be augmented to the route
table.
The value of tmnxIsisLoopfreeAltAugmRteTable is only valid when the
objects tmnxIsisLoopfreeAlternate and tmnxIsisRemoteLoopfreeAlternate
both have the value 'true'."
DEFVAL { false }
::= { tmnxIsisExtEntry 68 }
tmnxIsisPrefixSidTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisPrefixSidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisPrefixSidTable maintains the routes learned by an instance
of IS-IS protocol for a specific multi topology id."
::= { tmnxIsisSystemObjs 12 }
tmnxIsisPrefixSidEntry OBJECT-TYPE
SYNTAX TmnxIsisPrefixSidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisPrefixSidTable stores a route for a
given instance of the IS-IS protocol for a specific multi topology id."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisRouteMtId,
tmnxIsisRouteDestType,
tmnxIsisRouteDest,
tmnxIsisRoutePrefixLength,
tmnxIsisPrefixSidAdvRtrSysID,
tmnxIsisPrefixSidLevel,
tmnxIsisPrefixSidValue
}
::= { tmnxIsisPrefixSidTable 1 }
TmnxIsisPrefixSidEntry ::= SEQUENCE
{
tmnxIsisPrefixSidAdvRtrSysID SystemID,
tmnxIsisPrefixSidLevel INTEGER,
tmnxIsisPrefixSidValue Unsigned32,
tmnxIsisPrefixSidType INTEGER,
tmnxIsisPrefixSidFlags BITS,
tmnxIsisPrefixSidSRMS TruthValue,
tmnxIsisPrefixSidSRMSSelected TruthValue
}
tmnxIsisPrefixSidAdvRtrSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidAdvRtrSysID specifies the
system-id of the advertising IS through which this prefix/SID is
reachable."
::= { tmnxIsisPrefixSidEntry 1 }
tmnxIsisPrefixSidLevel OBJECT-TYPE
SYNTAX INTEGER {
level1IS (1),
level2IS (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidLevel specifies the IS-IS
Level at which the prefix was learned."
::= { tmnxIsisPrefixSidEntry 2 }
tmnxIsisPrefixSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidValue specifies the SID label
or index for this prefix."
::= { tmnxIsisPrefixSidEntry 3 }
tmnxIsisPrefixSidType OBJECT-TYPE
SYNTAX INTEGER {
internal (1),
external (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidType indicates the type of
route represented by this row entry."
::= { tmnxIsisPrefixSidEntry 4 }
tmnxIsisPrefixSidFlags OBJECT-TYPE
SYNTAX BITS {
bitR (0),
bitN (1),
bitP (2),
bitE (3),
bitV (4),
bitL (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidFlags indicates the flags of
a Prefix-SID advertised by an IP Reach or Label Binding TLV.
bitR (0) - Re-advertisement flag. If set, then the prefix to
which this Prefix-SID is attached, has been propagated by the
router either from another level (i.e.: from level-1 to level-2
or the opposite) or from redistribution (e.g.: from another
protocol).
bitN (1) - Node-SID flag. The N-Flag is set on Prefix-SIDs
attached to a router loopback address.
bitP (2) - no-PHP flag. If set, then the penultimate hop MUST NOT
pop the Prefix-SID before delivering the packet to the node
that advertised the Prefix-SID.
bitE (3) - Explicit-Null Flag. If set, any upstream neighbor
of the Prefix-SID originator MUST replace the Prefix-SID with
a Prefix-SID having an Explicit-NULL value (0 for IPv4 and 2 for
IPv6) before forwarding the packet.
bitV (4) - Value flag. If set, then the Prefix-SID carries a
value (instead of an index).
bitL (5) - Local Flag. If set, then the value/index carried by
the Prefix-SID has local significance."
::= { tmnxIsisPrefixSidEntry 5 }
tmnxIsisPrefixSidSRMS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidSRMS indicates whether or not
the Prefix/SID is advertised by a Segment Routing Mapping Server."
::= { tmnxIsisPrefixSidEntry 6 }
tmnxIsisPrefixSidSRMSSelected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisPrefixSidSRMSSelected indicates
whether or not the prefix SID received in the SRMS TLV is selected to
be programmed.
When there is however a SID for the same prefix received in a prefix
TLV, that prefix SID will be programmed and not the SRMS prefix SID.
The object tmnxIsisPrefixSidSRMSSelected is only applicable for SRMS
prefix SID; tmnxIsisPrefixSidSRMSSelected will return false in case
the value of tmnxIsisPrefixSidSRMS is false."
::= { tmnxIsisPrefixSidEntry 7 }
tmnxIsisSRMapServTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSRMapServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSRMapServTable contains objects to configure Segment
Routing (SR) Mapping Server (MS) data for IS-IS instances.
The system automatically creates and destroys rows in this table when
rows in the tmnxIsisTable are created and destroyed."
::= { tmnxIsisSystemObjs 13 }
tmnxIsisSRMapServEntry OBJECT-TYPE
SYNTAX TmnxIsisSRMapServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each conceptual row in the tmnxIsisSRMapServTable contains Segment
Routing (SR) Mapping Server (MS) information of an IS-IS instance.
Entries in this table are created and removed automatically by the
system."
INDEX {
vRtrID,
isisSysInstance
}
::= { tmnxIsisSRMapServTable 1 }
TmnxIsisSRMapServEntry ::= SEQUENCE
{
tmnxIsisSRMapServLastCh TimeStamp,
tmnxIsisSRMapServAdminState TmnxAdminState
}
tmnxIsisSRMapServLastCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMapServLastCh indicates the
sysUpTime when a configurable object in this row was last modified."
::= { tmnxIsisSRMapServEntry 1 }
tmnxIsisSRMapServAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMapServAdminState specifies the
administrative state of the Segment Routing Mapping Server for this
IS-IS instance."
DEFVAL { outOfService }
::= { tmnxIsisSRMapServEntry 2 }
tmnxIsisSRMSSidMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSRMSSidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSRMSSidMapTable contains objects to configure Segment
Routing (SR) Mapping Server (MS) SID data for IS-IS prefixes."
::= { tmnxIsisSystemObjs 14 }
tmnxIsisSRMSSidMapEntry OBJECT-TYPE
SYNTAX TmnxIsisSRMSSidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each conceptual row in the tmnxIsisSRMSSidMapTable contains Segment
Routing (SR) Mapping Server (MS) SID information of an IS-IS prefix.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxIsisSRMSSidMapRowStatus."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisSRMSSidMapNodeSidIndex
}
::= { tmnxIsisSRMSSidMapTable 1 }
TmnxIsisSRMSSidMapEntry ::= SEQUENCE
{
tmnxIsisSRMSSidMapNodeSidIndex Unsigned32,
tmnxIsisSRMSSidMapRowStatus RowStatus,
tmnxIsisSRMSSidMapLastCh TimeStamp,
tmnxIsisSRMSSidMapPrefixType InetAddressType,
tmnxIsisSRMSSidMapPrefix InetAddress,
tmnxIsisSRMSSidMapPrefixLength InetAddressPrefixLength,
tmnxIsisSRMSSidMapNodeSidRange Unsigned32,
tmnxIsisSRMSSidMapFlags BITS,
tmnxIsisSRMSSidMapLevel INTEGER,
tmnxIsisSRMSSidMapClearNFlag TruthValue
}
tmnxIsisSRMSSidMapNodeSidIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapNodeSidIndex specifies the
the node SID index/label for the IS-IS prefix which will be advertised
in a SID/Label Binding TLV."
::= { tmnxIsisSRMSSidMapEntry 1 }
tmnxIsisSRMSSidMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapRowStatus specifies the row
status used to create and delete entries in the
tmnxIsisSRMSSidMapTable.
To create a row, set this object to 'createAndGo(4)'. For the row
creation to succeed the prefix must be set in the same SNMP SET PDU;
i.e. the value of tmnxIsisSRMSSidMapPrefixType and
tmnxIsisSRMSSidMapPrefixLength must be set to a non-zero value and
tmnxIsisSRMSSidMapPrefix must be set to a non-empty string."
::= { tmnxIsisSRMSSidMapEntry 2 }
tmnxIsisSRMSSidMapLastCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapLastCh specifies the
sysUpTime when a configurable object in this row was last modified."
::= { tmnxIsisSRMSSidMapEntry 3 }
tmnxIsisSRMSSidMapPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapPrefixType specifies the IP
address type of tmnxIsisSRMSSidMapPrefix."
::= { tmnxIsisSRMSSidMapEntry 4 }
tmnxIsisSRMSSidMapPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapPrefix specifies the IP
address of the IS-IS prefix which will be advertised in a SID/Label
Binding TLV by the SR Mapping Server."
::= { tmnxIsisSRMSSidMapEntry 5 }
tmnxIsisSRMSSidMapPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapPrefixLength specifies the
prefix length to be used with tmnxIsisSRMSSidMapPrefix to get the SR
Mapping Server prefix."
::= { tmnxIsisSRMSSidMapEntry 6 }
tmnxIsisSRMSSidMapNodeSidRange OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapNodeSidRange specifies the
the node SID range for the IS-IS prefix which will be advertised in a
SID/Label Binding TLV."
DEFVAL { 1 }
::= { tmnxIsisSRMSSidMapEntry 7 }
tmnxIsisSRMSSidMapFlags OBJECT-TYPE
SYNTAX BITS {
bitS (0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapFlags specifies the flags
that are set in a SID/Label Binding TLV advertised by the Segment
Routing Mapping Server.
bitS (0) - If the S flag is set, the SID/Label Binding TLV should
be flooded across the entire routing domain;
if the S flag is not set, the SID/Label Binding TLV
must not be leaked between levels."
DEFVAL { {} }
::= { tmnxIsisSRMSSidMapEntry 8 }
tmnxIsisSRMSSidMapLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2),
level1L2 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRMSSidMapLevel specifies the IS-IS
Level in which the SID/Label Binding TLV is flood by the Segment
Routing Mapping Server.
When this object is set to level1 but the level capability on the
IS-IS instance (isisSysType) is set to level2, no MS SID/Label Binding
TLV is sent.
When this object is set to level1 and the level capability on the
IS-IS instance (isisSysType) is set to level1 or level1L2, SID/Label
Binding TLV will be sent on the interfaces with isisCircLevel set to
level1 or level1L2.
When this object is set to level2 and the level capability on the
IS-IS instance (isisSysType) is set to level2 or level1L2, SID/Label
Binding TLV will be sent on the interfaces with isisCircLevel set to
level2 or level1L2.
When this object is set to level1L2, SID/Label Binding TLV will be
sent on all interfaces."
DEFVAL { level1L2 }
::= { tmnxIsisSRMSSidMapEntry 9 }
tmnxIsisSRMSSidMapClearNFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisSRMSSidMapClearNFlag specifies whether the
node-sid flag (N-flag) should be cleared in a SID/Label Binding TLV.
When the value of tmnxIsisSRMSSidMapClearNFlag is false, the TLV is
tagged as a node SID meaning that it belongs to this node only.
When the value of tmnxIsisSRMSSidMapClearNFlag is true, the TLV is
considered as anycast SID meaning that the same prefix may be
advertised by multiple nodes."
DEFVAL { false }
::= { tmnxIsisSRMSSidMapEntry 10 }
tmnxIsisSRLfaStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSRLfaStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSRLfaStatsTable maintains information on Segment Routing
(SR) loopfree-alternate (LFA) coverage for each instance of IS-IS
protocol for a specific multi topology id."
::= { tmnxIsisSystemObjs 15 }
tmnxIsisSRLfaStatsEntry OBJECT-TYPE
SYNTAX TmnxIsisSRLfaStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisSRLfaStatsTable represents information
on SR LFA coverage for various topologies of the system."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisSRLfaStatsLevel,
tmnxIsisSRLfaStatsMtId,
tmnxIsisSRLfaStatsSidType,
tmnxIsisSRLfaStatsProtoVersion
}
::= { tmnxIsisSRLfaStatsTable 1 }
TmnxIsisSRLfaStatsEntry ::= SEQUENCE
{
tmnxIsisSRLfaStatsLevel INTEGER,
tmnxIsisSRLfaStatsMtId Unsigned32,
tmnxIsisSRLfaStatsSidType INTEGER,
tmnxIsisSRLfaStatsProtoVersion INTEGER,
tmnxIsisSRLfaStatsTotalSid Unsigned32,
tmnxIsisSRLfaStatsLfaCovered Unsigned32,
tmnxIsisSRLfaStatsRLfaCovered Unsigned32,
tmnxIsisSRLfaStatsTiLfaCovered Unsigned32
}
tmnxIsisSRLfaStatsLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2),
level1L2 (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsLevel specifies the IS-IS
Level for which SR LFA coverage has been computed."
::= { tmnxIsisSRLfaStatsEntry 1 }
tmnxIsisSRLfaStatsMtId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsMtId specifies the
multi-topology (MT) id number for which SR LFA coverage has been
computed."
::= { tmnxIsisSRLfaStatsEntry 2 }
tmnxIsisSRLfaStatsSidType OBJECT-TYPE
SYNTAX INTEGER {
nodeSid (0),
adjSid (1),
globAdjSid (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsSidType specifies the SID
type for which SR LFA coverage has been computed."
::= { tmnxIsisSRLfaStatsEntry 3 }
tmnxIsisSRLfaStatsProtoVersion OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (0),
ipv6 (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsProtoVersion specifies the
protocol version for which SR LFA coverage has been computed."
::= { tmnxIsisSRLfaStatsEntry 4 }
tmnxIsisSRLfaStatsTotalSid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsTotalSid indicates the
number of SIDs eligible for SR LFA calculation"
::= { tmnxIsisSRLfaStatsEntry 5 }
tmnxIsisSRLfaStatsLfaCovered OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsLfaCovered indicates the
number of SIDs for which an LFA is found."
::= { tmnxIsisSRLfaStatsEntry 6 }
tmnxIsisSRLfaStatsRLfaCovered OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsRLfaCovered indicates the
number of SIDs for which an Remote LFA is found."
::= { tmnxIsisSRLfaStatsEntry 7 }
tmnxIsisSRLfaStatsTiLfaCovered OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSRLfaStatsTiLfaCovered indicates the
number of SIDs for which an Topology Independent LFA is found."
::= { tmnxIsisSRLfaStatsEntry 8 }
tmnxIsisIgpSCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisIgpSCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisIgpSCTable maintains information on IGP Shortcut for each
instance of IS-IS protocol."
::= { tmnxIsisSystemObjs 16 }
tmnxIsisIgpSCEntry OBJECT-TYPE
SYNTAX TmnxIsisIgpSCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisIgpSCTable represents information on IGP
shortcut parameters configured for an ISIS instance."
INDEX {
vRtrID,
isisSysInstance
}
::= { tmnxIsisIgpSCTable 1 }
TmnxIsisIgpSCEntry ::= SEQUENCE
{ tmnxIsisIgpSCAdminState TmnxAdminState }
tmnxIsisIgpSCAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIgpSCAdminState specifies the desired
administrative state for IGP shortcuts on this ISIS instance."
DEFVAL { outOfService }
::= { tmnxIsisIgpSCEntry 2 }
tmnxIsisIgpSCTunnNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisIgpSCTunnNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisIgpSCTunnNextHopTable maintains information on IGP
Shortcut for each instance of IS-IS protocol."
::= { tmnxIsisSystemObjs 17 }
tmnxIsisIgpSCTunnNextHopEntry OBJECT-TYPE
SYNTAX TmnxIsisIgpSCTunnNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisIgpSCTunnNextHopTable represents
information on IGP shortcut tunnel next hop parameters configured on
the system."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisIgpSCTunnNextHopFamily
}
::= { tmnxIsisIgpSCTunnNextHopTable 1 }
TmnxIsisIgpSCTunnNextHopEntry ::= SEQUENCE
{
tmnxIsisIgpSCTunnNextHopFamily TmnxIgpSCFamilyType,
tmnxIsisIgpSCTunnNextHopLstCh TimeStamp,
tmnxIsisIgpSCTNHResolution TResolveStatus,
tmnxIsisIgpSCTNHResFilterRsvp TruthValue,
tmnxIsisIgpSCTNHResFilterSrTe TruthValue
}
tmnxIsisIgpSCTunnNextHopFamily OBJECT-TYPE
SYNTAX TmnxIgpSCFamilyType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxIsisIgpSCTunnNextHopFamily specifies the address
family for which the tunnel selection applies."
::= { tmnxIsisIgpSCTunnNextHopEntry 1 }
tmnxIsisIgpSCTunnNextHopLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIgpSCTunnNextHopLstCh indicates the
sysUpTime when this row was last modified."
::= { tmnxIsisIgpSCTunnNextHopEntry 2 }
tmnxIsisIgpSCTNHResolution OBJECT-TYPE
SYNTAX TResolveStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIgpSCTNHResolution specifies the resolution
status used for resolving IGP shortcut tunnel next hops belonging to a
specific family type.
When the value is 'filter', only selected tunnel types are used to
resolve routes following TTM preference.
When the value is 'any', any of the supported tunnel types are
selected to resolve routes following TTM preference.
When the value is 'match-family-ip', SR family uses the tunnel types
selected to resolve corresponding IP family routes except SR-TE
tunnels.
When the value is 'disabled' none of the tunnel types are selected."
DEFVAL { disabled }
::= { tmnxIsisIgpSCTunnNextHopEntry 3 }
tmnxIsisIgpSCTNHResFilterRsvp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIgpSCTNHResFilterRsvp specifies whether RSVP-TE
LSPs are allowed to be used for resolving IGP shortcut tunnels
belonging to a specific family type."
DEFVAL { false }
::= { tmnxIsisIgpSCTunnNextHopEntry 4 }
tmnxIsisIgpSCTNHResFilterSrTe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIgpSCTNHResFilterSrTe specifies whether SR-TE
Ipv4 LSPs are allowed to be used for resolving IGP shortcut tunnels
belonging to a specific family type."
DEFVAL { false }
::= { tmnxIsisIgpSCTunnNextHopEntry 5 }
tmnxIsisAdjSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisAdjSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisAdjSetTable maintains information on Adjacency Sets for
each instance of IS-IS protocol."
::= { tmnxIsisSystemObjs 18 }
tmnxIsisAdjSetEntry OBJECT-TYPE
SYNTAX TmnxIsisAdjSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisAdjSetTable represents information on an
Adjacency Set configured on the system."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisAdjSetId
}
::= { tmnxIsisAdjSetTable 1 }
TmnxIsisAdjSetEntry ::= SEQUENCE
{
tmnxIsisAdjSetId Unsigned32,
tmnxIsisAdjSetRowStatus RowStatus,
tmnxIsisAdjSetIdLstCh TimeStamp,
tmnxIsisAdjSetFamilyType TmnxAdjacencySetFamilyType,
tmnxIsisAdjSetSidType INTEGER,
tmnxIsisAdjSetSidValue Unsigned32,
tmnxIsisAdjSetParallel TruthValue,
tmnxIsisAdjSetAdvertise TruthValue,
tmnxIsisAdjSetDynSidValue Unsigned32,
tmnxIsisAdjSetTunlDestType InetAddressType,
tmnxIsisAdjSetTunlDestIp InetAddress,
tmnxIsisAdjSetNeighborSysID SystemID,
tmnxIsisAdjSetMembersCount Unsigned32,
tmnxIsisAdjSetActiveMembers Unsigned32,
tmnxIsisAdjSetUpTime Integer32,
tmnxIsisAdjSetStatus INTEGER,
tmnxIsisAdjSetMtu Unsigned32
}
tmnxIsisAdjSetId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetId specifies an identifier for given
adjacency set."
::= { tmnxIsisAdjSetEntry 1 }
tmnxIsisAdjSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetRowStatus specifies the row
status used for creation, deletion, or control of tmnxIsisAdjSetTable
entries."
::= { tmnxIsisAdjSetEntry 2 }
tmnxIsisAdjSetIdLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetIdLstCh indicates the sysUpTime
when this row was last modified."
::= { tmnxIsisAdjSetEntry 3 }
tmnxIsisAdjSetFamilyType OBJECT-TYPE
SYNTAX TmnxAdjacencySetFamilyType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetFamilyType specifies the address family for
the adjacency set."
DEFVAL { ipv4 }
::= { tmnxIsisAdjSetEntry 4 }
tmnxIsisAdjSetSidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
label (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetSidType specifies whether the
object tmnxIsisAdjSetSidValue is not valid, an index value or an
absolute label value."
DEFVAL { none }
::= { tmnxIsisAdjSetEntry 5 }
tmnxIsisAdjSetSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetSidValue together with
tmnxIsisAdjSetSidType specifies the static adjacency SID value or
index to be used for this adjacency-set. "
DEFVAL { 0 }
::= { tmnxIsisAdjSetEntry 6 }
tmnxIsisAdjSetParallel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetParallel specifies whether all links must
go to the same neighbor."
DEFVAL { true }
::= { tmnxIsisAdjSetEntry 8 }
tmnxIsisAdjSetAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetAdvertise specifies whether this adjacency
set should be advertised. Can only be set to true when all links go to
the same neighbor (parallel=true)."
DEFVAL { true }
::= { tmnxIsisAdjSetEntry 9 }
tmnxIsisAdjSetDynSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetDynSidValue indicates the
dynamic SID value used for this adjacency-set. In case a static sid is
configured, the dynamic sid will be 0."
::= { tmnxIsisAdjSetEntry 10 }
tmnxIsisAdjSetTunlDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetTunlDestType indicates the IP
address type for tmnxIsisAdjSetTunlDestIp."
::= { tmnxIsisAdjSetEntry 11 }
tmnxIsisAdjSetTunlDestIp OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetTunlDestIp indicates the IP
address of the adjacency-set tunnel destination. An adjacency-set
with links to different neighbors will have dest@ set to 0.0.0.0."
::= { tmnxIsisAdjSetEntry 12 }
tmnxIsisAdjSetNeighborSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNeighborSysID indicates the
system-id of the node where all links are terminated in case the
adjacency-set is of type parallel."
::= { tmnxIsisAdjSetEntry 13 }
tmnxIsisAdjSetMembersCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetMembersCount indicates the
number of interfaces that are a member of the adjacency-set."
::= { tmnxIsisAdjSetEntry 14 }
tmnxIsisAdjSetActiveMembers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetActiveMembers indicates the
number of active adjacencies that are a member of the adjacency-set."
::= { tmnxIsisAdjSetEntry 15 }
tmnxIsisAdjSetUpTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetUpTime indicates the amount of
time in seconds since this adjacency-set was last programmed."
::= { tmnxIsisAdjSetEntry 16 }
tmnxIsisAdjSetStatus OBJECT-TYPE
SYNTAX INTEGER {
notActive (0),
active (1),
activeIncomplete (2),
fibAddFailed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetStatus indicates the reason why an adj-set
is not active."
::= { tmnxIsisAdjSetEntry 17 }
tmnxIsisAdjSetMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetMtu indicates the MTU of the adjacency-set
tunnel. This value takes into account the lowest value of active
links, the label overhead and the segment routing tunnel-mtu"
::= { tmnxIsisAdjSetEntry 18 }
tmnxIsisAdjSetNhopTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisAdjSetNhopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisAdjSetNhopTable maintains information on Adjacency-Set
nhop for each instance of IS-IS protocol."
::= { tmnxIsisSystemObjs 19 }
tmnxIsisAdjSetNhopEntry OBJECT-TYPE
SYNTAX TmnxIsisAdjSetNhopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisAdjSetNhopTable represents information
on an Adjacency Set configured on the system."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisAdjSetNhopId,
tmnxIsisAdjSetNhopSysID,
tmnxIsisAdjSetNhopIfIndex
}
::= { tmnxIsisAdjSetNhopTable 1 }
TmnxIsisAdjSetNhopEntry ::= SEQUENCE
{
tmnxIsisAdjSetNhopId Unsigned32,
tmnxIsisAdjSetNhopSysID SystemID,
tmnxIsisAdjSetNhopIfIndex InterfaceIndex,
tmnxIsisAdjSetNhopType InetAddressType,
tmnxIsisAdjSetNhop InetAddress,
tmnxIsisAdjSetNhopUsage INTEGER,
tmnxIsisAdjSetNhopLevel INTEGER
}
tmnxIsisAdjSetNhopId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxIsisAdjSetNhopId specifies an identifier for given
adjacency set."
::= { tmnxIsisAdjSetNhopEntry 1 }
tmnxIsisAdjSetNhopSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNhopSysID specifies the
system-id of the nexthop and is used to reference the nexthop for this
adjacency-set link."
::= { tmnxIsisAdjSetNhopEntry 2 }
tmnxIsisAdjSetNhopIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNhopIfIndex specifies the
ifIndex of the outgoing interface for the path."
::= { tmnxIsisAdjSetNhopEntry 3 }
tmnxIsisAdjSetNhopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNhopType indicates the IP
address type for tmnxIsisAdjSetNhop."
::= { tmnxIsisAdjSetNhopEntry 4 }
tmnxIsisAdjSetNhop OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNhop indicates the IP address of
the next hop for this adjacency-set link."
::= { tmnxIsisAdjSetNhopEntry 5 }
tmnxIsisAdjSetNhopUsage OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
level1 (2),
level2 (3),
level1and2 (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNhopUsage indicates the
adjacency-set link type. An adjacency-set link of type level1 is used
for level 1 traffic only. An adjacency-set link of type level2 is
used for level 2 traffic only. An adjacency-set link of type
level1and2 is used for both level 1 and level 2 traffic."
::= { tmnxIsisAdjSetNhopEntry 6 }
tmnxIsisAdjSetNhopLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2),
level1L2 (3),
unknown (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisAdjSetNhopLevel indicates the circuit
type of the adjacency-set link."
::= { tmnxIsisAdjSetNhopEntry 7 }
tmnxIsisRouteNhTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisRouteNhEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisRouteNhTable maintains the routes and nexthops learned by
an instance of IS-IS protocol for a specific multi topology id. This
table replaces tmnxIsisRouteTable."
::= { tmnxIsisSystemObjs 20 }
tmnxIsisRouteNhEntry OBJECT-TYPE
SYNTAX TmnxIsisRouteNhEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisRouteNhTable stores a route and nexthop
for a given instance of the IS-IS protocol for a specific multi
topology id."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisRouteNhMtId,
tmnxIsisRouteNhDestType,
tmnxIsisRouteNhDest,
tmnxIsisRouteNhPrefixLength,
tmnxIsisRouteNhEcmpIndex
}
::= { tmnxIsisRouteNhTable 1 }
TmnxIsisRouteNhEntry ::= SEQUENCE
{
tmnxIsisRouteNhMtId Unsigned32,
tmnxIsisRouteNhDestType InetAddressType,
tmnxIsisRouteNhDest InetAddress,
tmnxIsisRouteNhPrefixLength InetAddressPrefixLength,
tmnxIsisRouteNhEcmpIndex Unsigned32,
tmnxIsisRouteNhIPType InetAddressType,
tmnxIsisRouteNhIP InetAddress,
tmnxIsisRouteNhLevel INTEGER,
tmnxIsisRouteNhSpfRunNumber Counter32,
tmnxIsisRouteNhMetric Unsigned32,
tmnxIsisRouteNhType INTEGER,
tmnxIsisRouteNhSysID SystemID,
tmnxIsisRouteNhTag Unsigned32,
tmnxIsisRouteNhBkupFlags INTEGER,
tmnxIsisRouteNhBkupType INTEGER,
tmnxIsisRouteNhBkupIpType InetAddressType,
tmnxIsisRouteNhBkupIP InetAddress,
tmnxIsisRouteNhBkupMetric Unsigned32,
tmnxIsisRouteNhCidrType TmnxInetCidrNextHopType,
tmnxIsisRouteNhOwner TmnxInetCidrNextHopOwner,
tmnxIsisRouteNhOwnerAuxInfo Unsigned32,
tmnxIsisRouteNhBkupCidrType TmnxInetCidrNextHopType,
tmnxIsisRouteNhBkupOwner TmnxInetCidrNextHopOwner,
tmnxIsisRouteNhBkupOwnerAuxInfo Unsigned32,
tmnxIsisRouteNhSidFlags BITS,
tmnxIsisRouteNhSidValue Unsigned32,
tmnxIsisRouteNhRouteStatus INTEGER,
tmnxIsisRouteNhNhopStatus INTEGER
}
tmnxIsisRouteNhMtId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhMtId specifies the multi
topology id number for this route.
If multi-topology is not supported for the route then the value of
tmnxIsisRouteNhMtId should be 0."
::= { tmnxIsisRouteNhEntry 1 }
tmnxIsisRouteNhDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhDestType specifies the IP
address type for tmnxIsisRouteNhDest."
::= { tmnxIsisRouteNhEntry 2 }
tmnxIsisRouteNhDest OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhDest specifies the destination
IP address of this route.
The address type of tmnxIsisRouteNhDest is indicated by
tmnxIsisRouteNhDestType."
::= { tmnxIsisRouteNhEntry 3 }
tmnxIsisRouteNhPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhPrefixLength specifies the
prefix length to be used with tmnxIsisRouteNhDest to get the network
prefix."
::= { tmnxIsisRouteNhEntry 4 }
tmnxIsisRouteNhEcmpIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhEcmpIndex specifies the ecmp
index of this nexthop entry."
::= { tmnxIsisRouteNhEntry 5 }
tmnxIsisRouteNhIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhIPType specifies the IP address
type for tmnxIsisRouteNhIP."
::= { tmnxIsisRouteNhEntry 6 }
tmnxIsisRouteNhIP OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhIP specifies the IP address of
the nexthop for this route.
The address type of tmnxIsisRouteNhIP is indicated by
tmnxIsisRouteNhIPType"
::= { tmnxIsisRouteNhEntry 7 }
tmnxIsisRouteNhLevel OBJECT-TYPE
SYNTAX INTEGER {
level1IS (1),
level2IS (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhLevel indicates the IS-IS Level
at which the prefix was learned."
::= { tmnxIsisRouteNhEntry 8 }
tmnxIsisRouteNhSpfRunNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhSpfRunNumber indicates the run
of spf calculation in which this route was selected."
::= { tmnxIsisRouteNhEntry 9 }
tmnxIsisRouteNhMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhMetric indicates the metric
value associated with the route.
This metric is obtained by the SPF calculations and is used by the
instance of the protocol.
For a given destination prefix, the route with the lower metric is the
shorter route."
::= { tmnxIsisRouteNhEntry 10 }
tmnxIsisRouteNhType OBJECT-TYPE
SYNTAX INTEGER {
internal (1),
external (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhType indicates the type of
route represented by this row entry."
::= { tmnxIsisRouteNhEntry 11 }
tmnxIsisRouteNhSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhSysID indicates the system-id
of the nexthop IS through which this route is reachable."
::= { tmnxIsisRouteNhEntry 12 }
tmnxIsisRouteNhTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhTag indicates a 32-bit integer
route tag for this route.
A value of 0 indicates that the tag has not been set."
::= { tmnxIsisRouteNhEntry 13 }
tmnxIsisRouteNhBkupFlags OBJECT-TYPE
SYNTAX INTEGER {
none (0),
hasLfa (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupFlags indicates the
presence or absence of LFA next-hops.
The value 'none' indicates that no next-hop is present;
the value 'hasLfa' indicates that an LFA next-hop is present in addition
to the regular next-hop."
::= { tmnxIsisRouteNhEntry 14 }
tmnxIsisRouteNhBkupType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
nodeProtection (1),
linkProtection (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupType indicates the type of
protection used by the backup next-hop.
The value 'notApplicable' indicates that the backup next-hop type is
not applicable; the value 'nodeProtection' indicates that the backup
next-hop uses a node-protection mechanism; the value 'linkProtection'
indicates that the backup next-hop uses link-protection mechanism."
::= { tmnxIsisRouteNhEntry 15 }
tmnxIsisRouteNhBkupIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupIpType indicates the IP
address type for tmnxIsisRouteNhBkupIP."
::= { tmnxIsisRouteNhEntry 16 }
tmnxIsisRouteNhBkupIP OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupIP indicates the IP address
of a backup next-hop.
The value of tmnxIsisRouteNhBkupIP is only valid when
tmnxIsisRouteNhBkupFlags has a value of 'hasLfa'.
The address type of tmnxIsisRouteNhBkupIP is indicated by the value of
tmnxIsisRouteNhBkupIpType."
::= { tmnxIsisRouteNhEntry 17 }
tmnxIsisRouteNhBkupMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupMetric indicates the
routing metric for a backup route.
The semantics of this metric are determined by the routing-protocol
specified in the route's ipCidrRouteProto value.
The value of tmnxIsisRouteNhBkupMetric is only valid when
tmnxIsisRouteNhBkupFlags has a value of 'hasLfa'."
::= { tmnxIsisRouteNhEntry 18 }
tmnxIsisRouteNhCidrType OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhCidrType indicates the type of
next hop for this route."
::= { tmnxIsisRouteNhEntry 19 }
tmnxIsisRouteNhOwner OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopOwner
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhOwner indicates the owner of
next hop for this route."
::= { tmnxIsisRouteNhEntry 20 }
tmnxIsisRouteNhOwnerAuxInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhOwnerAuxInfo indicates the
auxiliary information for next hop owner as indicated by
tmnxIsisRouteNhOwner.
The value of tmnxIsisRouteNhOwnerAuxInfo indicates the tunnel id
existing for this next hop type and owner."
::= { tmnxIsisRouteNhEntry 21 }
tmnxIsisRouteNhBkupCidrType OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupCidrType indicates the type
of next hop for this backup route."
::= { tmnxIsisRouteNhEntry 22 }
tmnxIsisRouteNhBkupOwner OBJECT-TYPE
SYNTAX TmnxInetCidrNextHopOwner
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupOwner indicates the owner
of next hop for this backup route."
::= { tmnxIsisRouteNhEntry 23 }
tmnxIsisRouteNhBkupOwnerAuxInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhBkupOwnerAuxInfo indicates the
auxiliary information, for next hop owner as indicated by
tmnxIsisRouteNhBkupOwner.
The value of tmnxIsisRouteNhBkupOwnerAuxInfo indicates the tunnel id
existing for this backup next hop type and owner."
::= { tmnxIsisRouteNhEntry 24 }
tmnxIsisRouteNhSidFlags OBJECT-TYPE
SYNTAX BITS {
bitUsed (0),
bitR (1),
bitN (2),
bitP (3),
bitE (4),
bitV (5),
bitL (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhSidFlags indicates the flags of
a Prefix-SID as defined by IETF segment routing.
bitUsed(0) - If set, tmnxIsisRouteNhSidValue is valid.
bitR (1) - Re-advertisement flag. If set, then the prefix to
which this Prefix-SID is attached, has been propagated by the
router either from another level (i.e.: from level-1 to level-2
or the opposite) or from redistribution (e.g.: from another
protocol).
bitN (2) - Node-SID flag. The N-Flag is set on Prefix-SIDs
attached to a router loopback address.
bitP (3) - no-PHP flag. If set, then the penultimate hop MUST NOT
pop the Prefix-SID before delivering the packet to the node
that advertised the Prefix-SID.
bitE (4) - Explicit-Null Flag. If set, any upstream neighbor
of the Prefix-SID originator MUST replace the Prefix-SID with
a Prefix-SID having an Explicit-NULL value (0 for IPv4 and 2 for
IPv6) before forwarding the packet.
bitV (5) - Value flag. If set, then the Prefix-SID carries a
value (instead of an index).
bitL (6) - Local Flag. If set, then the value/index carried by
the Prefix-SID has local significance."
::= { tmnxIsisRouteNhEntry 25 }
tmnxIsisRouteNhSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisRouteNhSidValue indicates the SID
label or index for this prefix."
::= { tmnxIsisRouteNhEntry 26 }
tmnxIsisRouteNhRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (0),
rtmAddFailed (1),
fibAddFailed (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisRouteNhRouteStatus indicates the reason why a
route is not active."
::= { tmnxIsisRouteNhEntry 27 }
tmnxIsisRouteNhNhopStatus OBJECT-TYPE
SYNTAX INTEGER {
success (0),
discarded (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the next hop status in RTM"
::= { tmnxIsisRouteNhEntry 28 }
tmnxIsisSidStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSidStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSidStatsTable provides statistics for each IS-IS Segment
Identifier (SID) on ingress and egress and per SID type."
::= { tmnxIsisSystemObjs 21 }
tmnxIsisSidStatsEntry OBJECT-TYPE
SYNTAX TmnxIsisSidStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisSidStatsEntry stores statistics for an
IS-IS SID."
INDEX {
vRtrID,
isisSysInstance,
tmnxIsisSidStatsSid
}
::= { tmnxIsisSidStatsTable 1 }
TmnxIsisSidStatsEntry ::= SEQUENCE
{
tmnxIsisSidStatsSid Unsigned32,
tmnxIsisSidStatsSidType INTEGER,
tmnxIsisSidStatsPrefixType InetAddressType,
tmnxIsisSidStatsPrefix InetAddress,
tmnxIsisSidStatsPrefixLength InetAddressPrefixLength,
tmnxIsisSidStatsIfIndex InterfaceIndexOrZero,
tmnxIsisSidStatsAdjSet Unsigned32,
tmnxIsisSidStatsIngressOperState INTEGER,
tmnxIsisSidStatsIngressOctets Counter64,
tmnxIsisSidStatsIngressPackets Counter64,
tmnxIsisSidStatsEgressOperState INTEGER,
tmnxIsisSidStatsEgressOctets Counter64,
tmnxIsisSidStatsEgressPackets Counter64
}
tmnxIsisSidStatsSid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsSid specifies the SID for
which statistics are collected."
::= { tmnxIsisSidStatsEntry 1 }
tmnxIsisSidStatsSidType OBJECT-TYPE
SYNTAX INTEGER {
node (0),
adjacency (1),
adjacencySet (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsSidType indicates the type of
SID for which statistics are collected."
::= { tmnxIsisSidStatsEntry 2 }
tmnxIsisSidStatsPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsPrefixType indicates the IP
address type of tmnxIsisSidStatsPrefix."
::= { tmnxIsisSidStatsEntry 3 }
tmnxIsisSidStatsPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsPrefix indicates the IP
address of the prefix for which SID statistics are collected."
::= { tmnxIsisSidStatsEntry 4 }
tmnxIsisSidStatsPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsPrefixLength indicates the
prefix length to be used with tmnxIsisSidStatsPrefix to get the SID
prefix."
::= { tmnxIsisSidStatsEntry 5 }
tmnxIsisSidStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsIfIndex specifies the
Interface Index on which the adjacency that uses this SID is
established in case the object tmnxIsisSidStatsSidType is 'adjacency'.
The value of this object contains '0' in case the object
tmnxIsisSidStatsSidType is different from 'adjacency'."
::= { tmnxIsisSidStatsEntry 6 }
tmnxIsisSidStatsAdjSet OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsAdjSet specifies the Adjacency
Set Identifier in case the object tmnxIsisSidStatsSidType is
'adjacencySet'.
The value of this object contains '0' in case the object
tmnxIsisSidStatsSidType is different from 'adjacencySet'."
::= { tmnxIsisSidStatsEntry 7 }
tmnxIsisSidStatsIngressOperState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
noResource (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsIngressOperState indicates the
operating state of this SID on ingress direction."
::= { tmnxIsisSidStatsEntry 8 }
tmnxIsisSidStatsIngressOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsIngressOctets indicates the
number of ingress octets."
::= { tmnxIsisSidStatsEntry 9 }
tmnxIsisSidStatsIngressPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsIngressPackets indicates the
number of ingress packets."
::= { tmnxIsisSidStatsEntry 10 }
tmnxIsisSidStatsEgressOperState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
noResource (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsEgressOperState indicates the
operating state of this SID on egress direction."
::= { tmnxIsisSidStatsEntry 11 }
tmnxIsisSidStatsEgressOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsEgressOctets indicates the
number of ingress octets."
::= { tmnxIsisSidStatsEntry 12 }
tmnxIsisSidStatsEgressPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisSidStatsEgressPackets indicates the
number of ingress packets."
::= { tmnxIsisSidStatsEntry 13 }
tmnxIsisSegmentRoutingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisSegmentRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisSegmentRoutingTable provides an extension of the
tmnxIsisTable for Segment Routing."
::= { tmnxIsisSystemObjs 22 }
tmnxIsisSegmentRoutingEntry OBJECT-TYPE
SYNTAX TmnxIsisSegmentRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in tmnxIsisSegmentRoutingTable represents additional
columns for an ISIS instance."
AUGMENTS { tmnxIsisEntry }
::= { tmnxIsisSegmentRoutingTable 1 }
TmnxIsisSegmentRoutingEntry ::= SEQUENCE
{
tmnxIsisSrLastChanged TimeStamp,
tmnxIsisSrMsdOverrideBmi Integer32,
tmnxIsisSrMsdOverrideErld Integer32
}
tmnxIsisSrLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisSrLastChanged indicates the sysUpTime when a
configurable object in this row was last modified."
::= { tmnxIsisSegmentRoutingEntry 1 }
tmnxIsisSrMsdOverrideBmi OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisSrMsdOverrideBmi specifies the override Base MPLS
Imposition (BMI) Maximum Sid Depth (MSD) value that will be announced
when Segment Routing is enabled.
The value '-1' indicates that the default MSD value will be used. The
default MSD value announced is the maximum value the platform supports
under ideal conditions.
The supported override range depends on the platform."
DEFVAL { -1 }
::= { tmnxIsisSegmentRoutingEntry 2 }
tmnxIsisSrMsdOverrideErld OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxIsisSrMsdOverrideErld specifies the override Entropy
Readable Label Depth (ERLD) Maximum Sid Depth (MSD) value that will
be announced when Segment Routing is enabled.
The value '-1' indicates that the default MSD value will be used. The
default MSD value announced is the maximum value the platform supports
under ideal conditions.
The supported override range depends on the platform."
DEFVAL { -1 }
::= { tmnxIsisSegmentRoutingEntry 3 }
tmnxIsisIfObjs OBJECT IDENTIFIER ::= { tmnxIsisObjs 2 }
tmnxIsisIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisIfTable has an entry for each router interface configured
for the IS-IS protocol."
::= { tmnxIsisIfObjs 1 }
tmnxIsisIfEntry OBJECT-TYPE
SYNTAX TmnxIsisIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisIfTable represents an interface on
this router that participates in the IS-IS protocol. An entry in
this table can be created or destroyed by an SNMP SET request to
tmnxIsisIfRowStatus. An attempt to destroy a row will fail if
tmnxIsisIfAdminState has not first been set to 'outOfService'."
INDEX {
vRtrID,
isisSysInstance,
vRtrIfIndex
}
::= { tmnxIsisIfTable 1 }
TmnxIsisIfEntry ::= SEQUENCE
{
tmnxIsisIfRowStatus RowStatus,
tmnxIsisIfLastChanged TimeStamp,
tmnxIsisIfAdminState TmnxAdminState,
tmnxIsisIfOperState TmnxOperState,
tmnxIsisIfCsnpInterval Unsigned32,
tmnxIsisIfHelloAuthKey OCTET STRING,
tmnxIsisIfHelloAuthType INTEGER,
tmnxIsisIfLspPacingInterval Unsigned32,
tmnxIsisIfCircIndex Integer32,
tmnxIsisIfRetransmitInterval Unsigned32,
tmnxIsisIfTypeDefault TruthValue,
tmnxIsisIfEnableBfd TruthValue,
tmnxIsisIfIPv6Unicast TruthValue,
tmnxIsisIfTeMetric Unsigned32,
tmnxIsisIfTeState TmnxOperState,
tmnxIsisIfAdminGroup Unsigned32,
tmnxIsisIfLdpSyncState TmnxOperState,
tmnxIsisIfLdpSyncMaxMetric TruthValue,
tmnxIsisIfLdpSyncTimerState INTEGER,
tmnxIsisIfLdpSyncTimeLeft Unsigned32,
tmnxIsisIfRouteTag Unsigned32,
tmnxIsisIfIPv6EnableBfd TruthValue,
tmnxIsisIfHelloAuth TruthValue,
tmnxIsisIfLoopfreeAltExclude TruthValue,
tmnxIsisIfOperType INTEGER,
tmnxIsisIfIPv4Mcast TruthValue,
tmnxIsisIfIPv6Mcast TruthValue,
tmnxIsisIfBerState INTEGER,
tmnxIsisIfIPv4IncludeBfdTlv TruthValue,
tmnxIsisIfIPv6IncludeBfdTlv TruthValue,
tmnxIsisIfHelloAuthKeyChain TNamedItemOrEmpty,
tmnxIsisIfRouteNHTemplate TNamedItemOrEmpty,
tmnxIsisIfIpv4SidType INTEGER,
tmnxIsisIfIpv4SidValue Unsigned32,
tmnxIsisIfIpv6SidType INTEGER,
tmnxIsisIfIpv6SidValue Unsigned32,
tmnxIsisIfDefaultInstance TruthValue,
tmnxIsisIfLBAdminWeight Unsigned32,
tmnxIsisIfHelloPadding INTEGER,
tmnxIsisIfSidProtection INTEGER,
tmnxIsisIfIpv4SidClearNFlag TruthValue,
tmnxIsisIfIpv6SidClearNFlag TruthValue,
tmnxIsisIfIpv4AdjSidType INTEGER,
tmnxIsisIfIpv4AdjSidValue Unsigned32,
tmnxIsisIfIpv6AdjSidType INTEGER,
tmnxIsisIfIpv6AdjSidValue Unsigned32
}
tmnxIsisIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfRowStatus specifies the row status
used for creation, deletion, or control of tmnxIsisIfTable entries.
Before this row can be destroyed, tmnxIsisIfAdminState must have been
set to 'outOfService'."
::= { tmnxIsisIfEntry 1 }
tmnxIsisIfLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLastChanged indicates the sysUpTime
when this row was last modified."
::= { tmnxIsisIfEntry 2 }
tmnxIsisIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfAdminState specifies the desired
administrative state for IS-IS protocol on this interface."
DEFVAL { inService }
::= { tmnxIsisIfEntry 3 }
tmnxIsisIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfOperState indicates the current
operational state of IS-IS protocol on this interface."
::= { tmnxIsisIfEntry 4 }
tmnxIsisIfCsnpInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfCsnpInterval specifies the interval
of time, in seconds, between transmission of Complete Sequence Number
PDUs (CSNP)."
DEFVAL { 10 }
::= { tmnxIsisIfEntry 5 }
tmnxIsisIfHelloAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..254))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfHelloAuthKey specifies the
authentication key string used to verify the authenticity of packets
sent by neighboring routers on this IS-IS interface.
For authentication to succeed both the authentication key and the
authentication type defined by the tmnxIsisIfHelloAuthType variable
must match.
If tmnxIsisIfHelloAuthType is set to 'password',
tmnxIsisIfHelloAuthKey can include any ASCII character.
Authentication can be configured globally and applied to all
ISIS levels running on this interface or it can be configured
on a per level basis. The most specific value is used.
When read, tmnxIsisIfHelloAuthKey always returns an Octet String of
length zero."
DEFVAL { ''H }
::= { tmnxIsisIfEntry 6 }
tmnxIsisIfHelloAuthType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
password (2),
md5 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfHelloAuthType specifies the method
of authentication used to verify the authenticity of packets sent by
neighboring routers on this IS-IS interface.
For authentication to succeed both the authentication key defined in
the tmnxIsisIfHelloAuthKey variable and the authentication type must
match.
Authentication can be configured globally and applied to all
ISIS levels running on this interface or it can be configured on
a per level basis. The most specific value is used."
DEFVAL { none }
::= { tmnxIsisIfEntry 7 }
tmnxIsisIfLspPacingInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLspPacingInterval specifies the
interval of time, in milliseconds, for transmission of Link State PDUs
(LSPs) for all ISIS levels running on this interface.
If the value of tmnxIsisIfLspPacingInterval is zero (0), no LSPs will
be sent on this interface."
DEFVAL { 100 }
::= { tmnxIsisIfEntry 8 }
tmnxIsisIfCircIndex OBJECT-TYPE
SYNTAX Integer32 (1..2000000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfCircIndex indicates a cross
reference index to the isisCircTable."
::= { tmnxIsisIfEntry 9 }
tmnxIsisIfRetransmitInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfRetransmitInterval specifies the
minimal interval of time, in seconds between retransmission of an LSP
on point-to-point interfaces."
DEFVAL { 5 }
::= { tmnxIsisIfEntry 10 }
tmnxIsisIfTypeDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfTypeDefault specifies if the circuit
type is default or has been modified.
Setting tmnxIsisIfTypeDefault to 'true' resets isisCircType to the
default for that interface.
Similarly any modification to the object isisCircType triggers this
object to become 'false'.
There is no effect of setting this object to 'false'."
DEFVAL { true }
::= { tmnxIsisIfEntry 11 }
tmnxIsisIfEnableBfd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfEnableBfd specifies whether
Bi-directional Forwarding Detection is enabled for IPv4 on this IS-IS
interface.
When the value is 'true', this IS-IS interface can establish BFD
sessions and use BFD as a signaling mechanism for forming adjacencies.
When tmnxIsisIfEnableBfd is 'false', BFD cannot be for IPv4."
DEFVAL { false }
::= { tmnxIsisIfEntry 12 }
tmnxIsisIfIPv6Unicast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIPv6Unicast specifies whether IPv6
unicast routing is enabled for the interface.
By default IPv6 unicast on all interfaces is set to true. However,
IPv6 unicast routing on ISIS is in effect when the object
'tmnxIsisMultiTopoIPv6Ucast' is set to 'true'."
DEFVAL { true }
::= { tmnxIsisIfEntry 13 }
tmnxIsisIfTeMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfTeMetric indicates the MPLS TE
metric configured for this interface; this metric is flooded out in
the TE metric sub-tlv in the ISIS LSPs.
Depending on the configuration, either the TE metric value or the
native ISIS metric values are used in CSPF computations."
::= { tmnxIsisIfEntry 14 }
tmnxIsisIfTeState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfTeState indicates the MPLS interface
TE status from the ISIS standpoint."
::= { tmnxIsisIfEntry 15 }
tmnxIsisIfAdminGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfAdminGroup indicates the bit-map
inherited from MPLS interface that identifies the admin groups to
which the interface belongs.
If bit 'n' is set, then the interface belongs to the admin group with
value 'n'."
::= { tmnxIsisIfEntry 16 }
tmnxIsisIfLdpSyncState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLdpSyncState indicates if IGP-LDP
synchronization is enabled on this interface.
tmnxIsisIfLdpSyncState is derived from tmnxIsisLdpSyncAdminState and
also whether it was enabled at the IP layer from ISIS standpoint."
::= { tmnxIsisIfEntry 17 }
tmnxIsisIfLdpSyncMaxMetric OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLdpSyncMaxMetric indicates if ISIS
advertised maximum metric value for the interface, depending on
whether tmnxIsisIfLdpSyncState is enabled on this interface."
::= { tmnxIsisIfEntry 18 }
tmnxIsisIfLdpSyncTimerState OBJECT-TYPE
SYNTAX INTEGER {
waitForLdpAdj (1),
timerActive (2),
ldpExchgDone (3),
timerExpired (4),
manualExit (5),
disabled (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLdpSyncTimerState indicates the
state of the tmnxIsisIfLdpSyncTimeLeft on this ISIS interface."
::= { tmnxIsisIfEntry 19 }
tmnxIsisIfLdpSyncTimeLeft OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1800)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLdpSyncTimeLeft indicates the time
left before ISIS reverts back to advertising normal metric for this
interface.
This is applicable only when tmnxIsisIfLdpSyncMaxMetric is 'true'."
::= { tmnxIsisIfEntry 20 }
tmnxIsisIfRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfRouteTag specifies a 32-bit integer
tag for the IP addresses of an interface.
This route tag can be used to apply administrative policy.
A value of 0 indicates that the tag has not been set."
DEFVAL { 0 }
::= { tmnxIsisIfEntry 21 }
tmnxIsisIfIPv6EnableBfd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIPv6EnableBfd specifies whether
Bi-directional Forwarding Detection is enabled for IPv6 on this IS-IS
interface.
When the value is 'true', this IS-IS interface can establish BFD
sessions and use BFD as a signaling mechanism for forming adjacencies.
When it is 'false', it cannot use BFD for IPv6."
DEFVAL { false }
::= { tmnxIsisIfEntry 22 }
tmnxIsisIfHelloAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfHelloAuth specifies whether ISIS
hello-authentication is enabled or disabled on this IS-IS interface.
When tmnxIsisIfHelloAuth is set to 'true', hello-authentication is
enabled on this IS-IS interface.
When tmnxIsisIfHelloAuth is set to 'false',
hello-authentication is disabled on this IS-IS interface and
the values of the following MIB objects are no longer applicable:
- tmnxIsisIfHelloAuthKey and tmnxIsisIfHelloAuthType at a global
interface level
- tmnxIsisIfLevelHelloAuthKey and tmnxIsisIfLevelHelloAuthType
at the specific L1/L2 interface level
- tmnxIsisAuthKey and tmnxIsisAuthType at the ISIS level."
DEFVAL { true }
::= { tmnxIsisIfEntry 23 }
tmnxIsisIfLoopfreeAltExclude OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLoopfreeAltExclude specifies whether
or not the ISIS interface should be excluded during LFA calculations.
If the value is 'true', the ISIS interface is excluded from LFA
calculations. If the value is 'false', the ISIS interface is included
in LFA calculations.
The value of tmnxIsisIfLoopfreeAltExclude for an interface is only
valid when both conditions are met - tmnxIsisLoopfreeAlternate has a
value of 'true' and tmnxIsisLevelLoopfreeAltExclude has a value of
'false'."
DEFVAL { false }
::= { tmnxIsisIfEntry 24 }
tmnxIsisIfOperType OBJECT-TYPE
SYNTAX INTEGER {
broadcast (1),
ptToPt (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfOperType indicates the operational
type on this ISIS interface."
::= { tmnxIsisIfEntry 25 }
tmnxIsisIfIPv4Mcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIPv4Mcast specifies if IPv4
multicast routing is enabled for the interface."
DEFVAL { true }
::= { tmnxIsisIfEntry 26 }
tmnxIsisIfIPv6Mcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIPv6Mcast specifies if IPv6
multicast routing is enabled for the interface."
DEFVAL { true }
::= { tmnxIsisIfEntry 27 }
tmnxIsisIfBerState OBJECT-TYPE
SYNTAX INTEGER {
none (0),
sd (1),
sf (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfBerState indicates the BER (Bit
Error Rate) state of this interface."
::= { tmnxIsisIfEntry 28 }
tmnxIsisIfIPv4IncludeBfdTlv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIPv4IncludeBfdTlv specifies whether
a BFD-enabled type-length-value (TLV) is included for IPv4 on this
IS-IS interface.
When the value of tmnxIsisIfEnableBfd is false, the value of
tmnxIsisIfIPv4IncludeBfdTlv is ignored.
When both tmnxIsisIfEnableBfd and tmnxIsisIfIPv4IncludeBfdTlv have the
value set to true, then the BFD-enabled TLV is included for IPv4."
DEFVAL { false }
::= { tmnxIsisIfEntry 29 }
tmnxIsisIfIPv6IncludeBfdTlv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIPv6IncludeBfdTlv specifies whether
a BFD-enabled type-length-value (TLV) is included for IPv6 on this
IS-IS interface.
When the value of tmnxIsisIfIPv6EnableBfd is false, the value of
tmnxIsisIfIPv6IncludeBfdTlv is ignored.
When both tmnxIsisIfIPv6EnableBfd and tmnxIsisIfIPv6IncludeBfdTlv have
the value set to true, then the BFD-enabled TLV is included for IPv6."
DEFVAL { false }
::= { tmnxIsisIfEntry 30 }
tmnxIsisIfHelloAuthKeyChain OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfHelloAuthKeyChain specifies the keychain to use
to sign and/or authenticate the IS-IS instance.
The keychain name is defined by tmnxKeyChainName and is the index for
TIMETRA-SECURITY-MIB::tmnxKeyChainTable"
DEFVAL { ''H }
::= { tmnxIsisIfEntry 31 }
tmnxIsisIfRouteNHTemplate OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfRouteNHTemplate specifies the next-hop template
that must be applied to the prefixes which primary next-hop uses this
interface name.
The next-hop template name is defined by tmnxRouteNHTemplateName and
is the index for
TIMETRA-ROUTE-NEXT-HOP-TEMPLATE-MIB::tmnxRouteNHTemplateTable."
DEFVAL { ''H }
::= { tmnxIsisIfEntry 32 }
tmnxIsisIfIpv4SidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
index (1),
label (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfIpv4SidType specifies how the value of
tmnxIsisIfIpv4SidValue shall be interpreted."
DEFVAL { none }
::= { tmnxIsisIfEntry 33 }
tmnxIsisIfIpv4SidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIpv4SidValue specifies the IPv4 node
SID label or index for this interface."
DEFVAL { 0 }
::= { tmnxIsisIfEntry 34 }
tmnxIsisIfIpv6SidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
index (1),
label (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfIpv6SidType specifies how the value of
tmnxIsisIfIpv6SidValue shall be interpreted."
DEFVAL { none }
::= { tmnxIsisIfEntry 35 }
tmnxIsisIfIpv6SidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIpv6SidValue specifies the IPv6 node
SID label or index for this interface."
DEFVAL { 0 }
::= { tmnxIsisIfEntry 36 }
tmnxIsisIfDefaultInstance OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfDefaultInstance specifies whether a
non-MI capable router can establish an adjacency and operate with an
SR OS router in a non zero IS-IS instance.
When the value of tmnxIsisIfDefaultInstance is true and the router
doesn't receive IID-TLVs it will establish an adjacency in the
non-zero isisSysInstance; the router will then operate in the non-zero
isisSysInstance so that it appears to be in the default IS-IS instance
0 to its neighbor."
DEFVAL { false }
::= { tmnxIsisIfEntry 37 }
tmnxIsisIfLBAdminWeight OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLBAdminWeight specifies an explicit
load-balancing-weight for this interface."
DEFVAL { 0 }
::= { tmnxIsisIfEntry 38 }
tmnxIsisIfHelloPadding OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
adaptive (1),
loose (2),
strict (3),
none (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfHelloPadding specifies whether
padding should be done on the ISIS hello packets.
If the value of tmnxIsisIfHelloPadding is set to disable, the padding
is disabled on all types of interfaces for all adjacency states.
However, padding may be done if it is configured at one of the
higher/parent levels.
If the value of tmnxIsisIfHelloPadding is set to adaptive, the padding
is done until the state of the neighbor adjacency is up.
If the value of tmnxIsisIfHelloPadding is set to loose, the padding is
done until the state of the neighbor adjacency is initialized.
If the value of tmnxIsisIfHelloPadding is set to strict, the padding
is done for all adjacency states.
If the value of tmnxIsisIfHelloPadding is set to none, the padding is
disabled on all types of interfaces for all adjacency states. Also,
padding will not be done even if it is configured at one of the
higher/parent levels."
DEFVAL { disable }
::= { tmnxIsisIfEntry 39 }
tmnxIsisIfSidProtection OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfSidProtection specifies whether the
SID needs to be advertised with protection enabled or disabled.
If the value of tmnxIsisIfSidProtection is set to disabled, no
protection is calculated and a single SID with B-flag cleared is sent
in adjacency SID sub-TLV.
If the value of tmnxIsisIfSidProtection is set to enabled, SID
protection is provided and a single SID with B-flag set is sent in
adjacency SID sub-TLV."
DEFVAL { enabled }
::= { tmnxIsisIfEntry 40 }
tmnxIsisIfIpv4SidClearNFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfIpv4SidClearNFlag specifies whether the
node-sid flag (N-flag) should be cleared in an IPv4 prefix SID
sub-TLV.
When the value of tmnxIsisIfIpv4SidClearNFlag is false, the prefix SID
sub-TLV for the IPv4 prefix of a loopback interface is tagged as a
node SID meaning that it belongs to this node only.
When the value of tmnxIsisIfIpv4SidClearNFlag is true, the same prefix
SID sub-TLV may be advertised by multiple nodes."
DEFVAL { false }
::= { tmnxIsisIfEntry 41 }
tmnxIsisIfIpv6SidClearNFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfIpv6SidClearNFlag specifies whether the
node-sid flag (N-flag) should be cleared in an IPv6 prefix SID
sub-TLV.
When the value of tmnxIsisIfIpv6SidClearNFlag is false, the prefix SID
sub-TLV for the IPv6 prefix of a loopback interface is tagged as a
node SID meaning that it belongs to this node only.
When the value of tmnxIsisIfIpv6SidClearNFlag is true, the same prefix
SID sub-TLV may be advertised by multiple nodes."
DEFVAL { false }
::= { tmnxIsisIfEntry 42 }
tmnxIsisIfIpv4AdjSidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
label (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIpv4AdjSidType specifies whether the
object tmnxIsisIfIpv4AdjSidValue is not valid, an index value or an
absolute label value."
DEFVAL { none }
::= { tmnxIsisIfEntry 43 }
tmnxIsisIfIpv4AdjSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIpv4AdjSidValue together with
tmnxIsisIfIpv4AdjSidType specifies the static adjacency SID value or
index to be used for this adjacency. "
DEFVAL { 0 }
::= { tmnxIsisIfEntry 44 }
tmnxIsisIfIpv6AdjSidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
label (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIpv6AdjSidType specifies whether the
object tmnxIsisIfIpv6AdjSidValue is not valid, an index value or an
absolute label value."
DEFVAL { none }
::= { tmnxIsisIfEntry 46 }
tmnxIsisIfIpv6AdjSidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfIpv6AdjSidValue together with
tmnxIsisIfIpv6AdjSidType specifies the static adjacency SID value or
index to be used for this adjacency. "
DEFVAL { 0 }
::= { tmnxIsisIfEntry 47 }
tmnxIsisIfLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisIfLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisIfLevelTable provides attributes to be applied on a
specific IS-IS interface operating at a specific IS-IS protocol level."
::= { tmnxIsisIfObjs 2 }
tmnxIsisIfLevelEntry OBJECT-TYPE
SYNTAX TmnxIsisIfLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisIfLevelTable represents IS-IS level
attributes to be used with an interface belonging to a specific IS-IS
protocol instance on a specific router instance. Rows for Level 1 and
2 are created as an action of creating a row in the tmnxIsisIfTable."
INDEX {
vRtrID,
isisSysInstance,
vRtrIfIndex,
tmnxIsisIfLevel
}
::= { tmnxIsisIfLevelTable 1 }
TmnxIsisIfLevelEntry ::= SEQUENCE
{
tmnxIsisIfLevel INTEGER,
tmnxIsisIfLevelLastChangeTime TimeStamp,
tmnxIsisIfLevelHelloAuthKey OCTET STRING,
tmnxIsisIfLevelHelloAuthType INTEGER,
tmnxIsisIfLevelPassive TruthValue,
tmnxIsisIfLevelNumAdjacencies Unsigned32,
tmnxIsisIfLevelISPriority Unsigned32,
tmnxIsisIfLevelHelloTimer Unsigned32,
tmnxIsisIfLevelAdminMetric Unsigned32,
tmnxIsisIfLevelOperMetric Unsigned32,
tmnxIsisIfLvlIPv6UcastAdmMet Unsigned32,
tmnxIsisIfLvlIPv6UcastOperMet Unsigned32,
tmnxIsisIfLvlIPv4McastAdmMetric Unsigned32,
tmnxIsisIfLvlIPv6McastAdmMetric Unsigned32,
tmnxIsisIfLevelLinkGroupName TNamedItemOrEmpty,
tmnxIsisIfLevelSdOffset Unsigned32,
tmnxIsisIfLevelSfOffset Unsigned32,
tmnxIsisIfLvlIPv4McastOperMetric Unsigned32,
tmnxIsisIfLvlIPv6McastOperMetric Unsigned32,
tmnxIsisIfLevelHelloAuthKeyChain TNamedItemOrEmpty,
tmnxIsisIfLevelLspTxQCount Unsigned32,
tmnxIsisIfLevelHelloPadding INTEGER
}
tmnxIsisIfLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevel specifies the IS-IS protocol
level that this row entry describes."
::= { tmnxIsisIfLevelEntry 1 }
tmnxIsisIfLevelLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelLastChangeTime indicates the
sysUpTime when this row was last modified."
::= { tmnxIsisIfLevelEntry 2 }
tmnxIsisIfLevelHelloAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..254))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelHelloAuthKey specifies the
authentication key string used to verify the authenticity of packets
sent by neighboring routers on this IS-IS interface at this level.
For authentication to succeed both the authentication key and the
authentication type defined by the tmnxIsisIfLevelHelloAuthType
variable must match.
If tmnxIsisIfLevelHelloAuthType is set to 'password',
tmnxIsisIfLevelHelloAuthKey can include any ASCII character.
Authentication can be configured globally and applied to all ISIS
levels or it can be configured on a per level basis; the most specific
value is used.
If the value of tmnxIsisIfLevelHelloAuthType is 'useGlobal', then the
global values, if any, defined in tmnxIsisIfHelloAuthKey and
tmnxIsisIfHelloAuthType are used instead.
When read, tmnxIsisIfLevelHelloAuthKey always returns an Octet String
of length zero."
DEFVAL { ''H }
::= { tmnxIsisIfLevelEntry 3 }
tmnxIsisIfLevelHelloAuthType OBJECT-TYPE
SYNTAX INTEGER {
useGlobal (0),
none (1),
password (2),
md5 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelHelloAuthType specifies the
method of authentication used to verify the authenticity of packets
sent by neighboring routers on this IS-IS interface at this level.
For authentication to succeed both the authentication key defined in
the tmnxIsisIfLevelHelloAuthKey variable and the authentication type
must match.
Authentication can be configured globally and applied to all ISIS
levels running on this interface or it can be configured on a per
level basis; the most specific value is used.
When tmnxIsisIfLevelHelloAuthType has a value of 'useGlobal', the
values of tmnxIsisIfLevelHelloAuthKey and tmnxIsisIfLevelHelloAuthType
are applied to the interfaces for this level."
DEFVAL { useGlobal }
::= { tmnxIsisIfLevelEntry 4 }
tmnxIsisIfLevelPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelPassive specifies whether the
interface level is running in passive mode.
When tmnxIsisIfLevelPassive has the value 'true', this interface
address is advertised for this level without running the IS-IS
protocol on this interface level; while in passive mode, the interface
level ignores ingress IS-IS protocol packets and does not transmit any
IS-IS protocol packets.
When tmnxIsisIfLevelPassive has the value 'false', this interface
address is advertised at this IS-IS level only if it is configured as
with the IS-IS protocol as enabled."
DEFVAL { false }
::= { tmnxIsisIfLevelEntry 5 }
tmnxIsisIfLevelNumAdjacencies OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelNumAdjacencies indicates the
number of adjacencies on this particular level of the interface."
::= { tmnxIsisIfLevelEntry 6 }
tmnxIsisIfLevelISPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelISPriority specifies the
priority for becoming LAN Designated Intermediate System at this
level.
The value of tmnxIsisIfLevelISPriority shadows the value of object
isisCircLevelISPriority to have an additional accepted value of 0."
::= { tmnxIsisIfLevelEntry 7 }
tmnxIsisIfLevelHelloTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..20000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelHelloTimer specifies the
maximum period, in seconds, between IIH PDUs on multiaccess networks
at this level for LANs.
The value of tmnxIsisIfLevelHelloTimer shadows isisCircLevelHelloTimer
to store the values of hello timer in seconds."
::= { tmnxIsisIfLevelEntry 8 }
tmnxIsisIfLevelAdminMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelAdminMetric specifies the
default metric value of this circuit for this level.
A value of 0 means that the metric is not configured; in such a case
if the tmnxIsisReferenceBw is configured, the value of the metric
should be calculated using the formula :
Metric = reference-bandwidth / bandwidth.
If the tmnxIsisReferenceBw is configured as Ten Gig (10,000,000,000) a
100-Mbps interface has a default metric of 100.
In order for metrics in excess of 63 to be configured wide metrics
must be deployed.
If the reference bandwidth is not configured then all levels will have
a default metric of 10.
System and loopback interface levels will always have a metric value
of 0.
The operational value of the metric is maintained in the object
tmnxIsisIfLevelOperMetric."
DEFVAL { 0 }
::= { tmnxIsisIfLevelEntry 9 }
tmnxIsisIfLevelOperMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelOperMetric indicates the
operational value of the metric being used in this circuit for this
level.
System and loop back interface levels will have metric value of 0."
::= { tmnxIsisIfLevelEntry 10 }
tmnxIsisIfLvlIPv6UcastAdmMet OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLvlIPv6UcastAdmMet specifies the
interface level metric for IPv6 unicast."
DEFVAL { 0 }
::= { tmnxIsisIfLevelEntry 11 }
tmnxIsisIfLvlIPv6UcastOperMet OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLvlIPv6UcastOperMet indicates the
operational value of the IPv6 unicast metric being used with this
interface level."
::= { tmnxIsisIfLevelEntry 12 }
tmnxIsisIfLvlIPv4McastAdmMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLvlIPv4McastAdmMetric specifies the
interface level metric for IPv4 multicast."
DEFVAL { 0 }
::= { tmnxIsisIfLevelEntry 13 }
tmnxIsisIfLvlIPv6McastAdmMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLvlIPv6McastAdmMetric specifies the
interface level metric for IPv6 multicast."
DEFVAL { 0 }
::= { tmnxIsisIfLevelEntry 14 }
tmnxIsisIfLevelLinkGroupName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelLinkGroupName specifies the
ISIS link group associated with this particular level of the
interface."
DEFVAL { ''H }
::= { tmnxIsisIfLevelEntry 15 }
tmnxIsisIfLevelSdOffset OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelSdOffset specifies the offset
by which the IS-IS interface metric should be increased upon receiving
the signal degrade threshold event."
DEFVAL { 0 }
::= { tmnxIsisIfLevelEntry 16 }
tmnxIsisIfLevelSfOffset OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelSfOffset specifies the offset
by which the IS-IS interface metric should be further increased in
addition to the offset specified by tmnxIsisIfLevelSdOffset upon
receiving the signal fail threshold event."
DEFVAL { 0 }
::= { tmnxIsisIfLevelEntry 17 }
tmnxIsisIfLvlIPv4McastOperMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLvlIPv4McastOperMetric indicates the
operational value of the interface level metric for IPv4 multicast."
::= { tmnxIsisIfLevelEntry 18 }
tmnxIsisIfLvlIPv6McastOperMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLvlIPv6McastOperMetric indicates the
operational value of the interface level metric for IPv6 multicast."
::= { tmnxIsisIfLevelEntry 19 }
tmnxIsisIfLevelHelloAuthKeyChain OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxIsisIfLevelHelloAuthKeyChain specifies the keychain
to use to sign and/or authenticate the IS-IS instance.
The keychain name is defined by tmnxKeyChainName and is the index for
TIMETRA-SECURITY-MIB::tmnxKeyChainTable"
DEFVAL { ''H }
::= { tmnxIsisIfLevelEntry 20 }
tmnxIsisIfLevelLspTxQCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelLspTxQCount indicates how many
LSPs are in the transmit queue of this interface for this ISIS level."
::= { tmnxIsisIfLevelEntry 21 }
tmnxIsisIfLevelHelloPadding OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
adaptive (1),
loose (2),
strict (3),
none (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfLevelHelloPadding specifies whether
padding should be done on the ISIS hello packets.
If the value of tmnxIsisIfLevelHelloPadding is set to disable, the
padding is disabled on all types of interfaces for all adjacency
states. However, padding may be done if it is configured at one of the
higher/parent levels.
If the value of tmnxIsisIfLevelHelloPadding is set to adaptive, the
padding is done until the state of the neighbor adjacency is up.
If the value of tmnxIsisIfLevelHelloPadding is set to loose, the
padding is done until the state of the neighbor adjacency is
initialized.
If the value of tmnxIsisIfLevelHelloPadding is set to strict, the
padding is done for all adjacency states.
If the value of tmnxIsisIfLevelHelloPadding is set to none, the
padding is disabled on all types of interfaces for all adjacency
states. Also, padding will not be done even if it is configured at one
of the higher/parent levels."
DEFVAL { disable }
::= { tmnxIsisIfLevelEntry 22 }
tmnxIsisIfAdjSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisIfAdjSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisIfAdjSetTable maintains list of Adjacency Sets assigned to
an interface."
::= { tmnxIsisIfObjs 3 }
tmnxIsisIfAdjSetEntry OBJECT-TYPE
SYNTAX TmnxIsisIfAdjSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisIfAdjSetTable indicates that the
interface is assigned to an adjacency set (tmnxIsisAdjSetEntry). The
adjacency-set must exist under segment routing before it can be
assigned to an interface"
INDEX {
vRtrID,
isisSysInstance,
vRtrIfIndex,
tmnxIsisIfAdjSetId
}
::= { tmnxIsisIfAdjSetTable 1 }
TmnxIsisIfAdjSetEntry ::= SEQUENCE
{
tmnxIsisIfAdjSetId Unsigned32,
tmnxIsisIfAdjSetRowStatus RowStatus,
tmnxIsisIfAdjSetIdLstCh TimeStamp
}
tmnxIsisIfAdjSetId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxIsisIfAdjSetId specifies an identifier for given
adjacency set."
::= { tmnxIsisIfAdjSetEntry 1 }
tmnxIsisIfAdjSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfAdjSetRowStatus specifies the row
status used for creation, deletion, or control of
tmnxIsisIfAdjSetTable entries."
::= { tmnxIsisIfAdjSetEntry 2 }
tmnxIsisIfAdjSetIdLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisIfAdjSetIdLstCh indicates the
sysUpTime when this row was last modified."
::= { tmnxIsisIfAdjSetEntry 3 }
tmnxIsisAdjObjs OBJECT IDENTIFIER ::= { tmnxIsisObjs 3 }
tmnxIsisISAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisISAdjEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxIsisISAdjTable is the table of adjacencies to Intermediate
Systems and their operational status information."
::= { tmnxIsisAdjObjs 1 }
tmnxIsisISAdjEntry OBJECT-TYPE
SYNTAX TmnxIsisISAdjEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the tmnxIsisISAdjTable represents an adjacency to an
Intermediate System on this system."
INDEX {
vRtrID,
isisSysInstance,
isisCircIndex,
isisISAdjIndex
}
::= { tmnxIsisISAdjTable 1 }
TmnxIsisISAdjEntry ::= SEQUENCE
{
tmnxIsisISAdjExpiresIn Integer32,
tmnxIsisISAdjCircLevel INTEGER,
tmnxIsisISAdjNeighborIP IpAddress,
tmnxIsisISAdjRestartSupport TruthValue,
tmnxIsisISAdjRestartStatus INTEGER,
tmnxIsisISAdjRestartSupressed TruthValue,
tmnxIsisISAdjNumRestarts Unsigned32,
tmnxIsisISAdjLastRestartTime TimeStamp,
tmnxIsisISAdjNeighborIPv6Type InetAddressType,
tmnxIsisISAdjNeighborIPv6 InetAddress,
tmnxIsisISAdjMtEnabled TruthValue,
tmnxIsisISAdjMtId0 TruthValue,
tmnxIsisISAdjMtId2 TruthValue,
tmnxIsisISAdjMtId3 TruthValue,
tmnxIsisISAdjMtId4 TruthValue,
tmnxIsisISAdjIpv4SidType INTEGER,
tmnxIsisISAdjIpv4SidValue Unsigned32,
tmnxIsisISAdjIpv6SidType INTEGER,
tmnxIsisISAdjIpv6SidValue Unsigned32,
tmnxIsisISAdjMtId0BfdRequired TruthValue,
tmnxIsisISAdjMtId2BfdRequired TruthValue,
tmnxIsisISAdjMtId3BfdRequired TruthValue,
tmnxIsisISAdjMtId4BfdRequired TruthValue,
tmnxIsisISAdjMtId0BfdUsable TruthValue,
tmnxIsisISAdjMtId2BfdUsable TruthValue,
tmnxIsisISAdjMtId3BfdUsable TruthValue,
tmnxIsisISAdjMtId4BfdUsable TruthValue
}
tmnxIsisISAdjExpiresIn OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjExpiresIn indicates the time in
which the adjacency will expire if no hello packets are received."
::= { tmnxIsisISAdjEntry 1 }
tmnxIsisISAdjCircLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2),
level1L2 (3),
unknown (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjCircLevel indicates the circuit
type of the adjacency as advertised."
::= { tmnxIsisISAdjEntry 2 }
tmnxIsisISAdjNeighborIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjNeighborIP indicates the IP
address of the neighbor with which adjacency is formed."
::= { tmnxIsisISAdjEntry 3 }
tmnxIsisISAdjRestartSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjRestartSupport indicates whether
adjacency supports ISIS graceful restart.
If tmnxIsisISAdjRestartSupport has a value of 'true' the adjacency
supports graceful restart."
::= { tmnxIsisISAdjEntry 4 }
tmnxIsisISAdjRestartStatus OBJECT-TYPE
SYNTAX INTEGER {
notHelping (1),
restarting (2),
restartComplete (3),
helping (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjRestartStatus indicates the
graceful restart status of the adjacency."
::= { tmnxIsisISAdjEntry 5 }
tmnxIsisISAdjRestartSupressed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjRestartSupressed indicates if the
adjacency has requested this router to suppress advertisement of the
adjacency in this router's LSPs.
If tmnxIsisISAdjRestartSupressed has a value of 'true' the adjacency
has requested to suppress advertisement of the LSPs."
::= { tmnxIsisISAdjEntry 6 }
tmnxIsisISAdjNumRestarts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjNumRestarts indicates the number
of times the adjacency has attempted restart."
::= { tmnxIsisISAdjEntry 7 }
tmnxIsisISAdjLastRestartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjLastRestartTime indicates the
last time the adjacency attempted restart."
::= { tmnxIsisISAdjEntry 8 }
tmnxIsisISAdjNeighborIPv6Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjNeighborIPv6Type indicates the IP
address type of tmnxIsisISAdjNeighborIPv6; it will be 'ipv6', 'ipv6z'
or 'unknown'."
::= { tmnxIsisISAdjEntry 9 }
tmnxIsisISAdjNeighborIPv6 OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjNeighborIPv6 indicates the IP
address of the neighbor with which an IPv6-adjacency is formed; this
will always be an IPv6 address."
::= { tmnxIsisISAdjEntry 10 }
tmnxIsisISAdjMtEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtEnabled indicates if the ISIS
multi-topology protocol is supported on the neighbor.
If the value of tmnxIsisISAdjMtEnabled is 'true', ISIS multi-topology
protocol is enabled on the neighbor."
::= { tmnxIsisISAdjEntry 11 }
tmnxIsisISAdjMtId0 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId0 indicates if the native
topology is supported on the neighbor.
If the value of tmnxIsisISAdjMtId0 is 'true', native topology is
supported on the neighbor."
::= { tmnxIsisISAdjEntry 12 }
tmnxIsisISAdjMtId2 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId2 indicates if the
multi-topology for IPv6 is supported on the neighbor.
If the value of tmnxIsisISAdjMtId2 is 'true', multi-topology for IPv6
is supported on the neighbor."
::= { tmnxIsisISAdjEntry 13 }
tmnxIsisISAdjMtId3 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId3 indicates if the MT 3 IPv4
topology is supported on the neighbor.
If the value of tmnxIsisISAdjMtId3 is 'true', MT 3 IPv4 topology is
supported on the neighbor."
::= { tmnxIsisISAdjEntry 14 }
tmnxIsisISAdjMtId4 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId4 indicates if the MT 4 IPv6
topology is supported on the neighbor.
If the value of tmnxIsisISAdjMtId4 is 'true', MT 4 IPv6 topology is
supported on the neighbor."
::= { tmnxIsisISAdjEntry 15 }
tmnxIsisISAdjIpv4SidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
index (1),
mplsLabel (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisISAdjIpv4SidType indicates how the value of
tmnxIsisISAdjIpv4SidValue shall be interpreted."
::= { tmnxIsisISAdjEntry 16 }
tmnxIsisISAdjIpv4SidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjIpv4SidValue indicates the IPv4
SID label or index for this adjacency."
::= { tmnxIsisISAdjEntry 17 }
tmnxIsisISAdjIpv6SidType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
index (1),
mplsLabel (2),
ipv6Label (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxIsisISAdjIpv6SidType indicates how the value of
tmnxIsisISAdjIpv6SidValue shall be interpreted."
::= { tmnxIsisISAdjEntry 18 }
tmnxIsisISAdjIpv6SidValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjIpv6SidValue indicates the IPv6
SID label or index for this adjacency."
::= { tmnxIsisISAdjEntry 19 }
tmnxIsisISAdjMtId0BfdRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId0BfdRequired indicates if BFD
session is required for this Multi Topology before bringing the
adjacency to FULL state, as described in RFC6213."
::= { tmnxIsisISAdjEntry 20 }
tmnxIsisISAdjMtId2BfdRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId2BfdRequired indicates if BFD
session is required for this Multi Topology before bringing the
adjacency to FULL state, as described in RFC6213."
::= { tmnxIsisISAdjEntry 21 }
tmnxIsisISAdjMtId3BfdRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId3BfdRequired indicates if BFD
session is required for this Multi Topology before bringing the
adjacency to FULL state, as described in RFC6213."
::= { tmnxIsisISAdjEntry 22 }
tmnxIsisISAdjMtId4BfdRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId4BfdRequired indicates if BFD
session is required for this Multi Topology before bringing the
adjacency to FULL state, as described in RFC6213."
::= { tmnxIsisISAdjEntry 23 }
tmnxIsisISAdjMtId0BfdUsable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId0BfdUsable indicates if BFD
session for this Multi Topology is usable, that is either not required
or in state UP, as described in RFC6213."
::= { tmnxIsisISAdjEntry 24 }
tmnxIsisISAdjMtId2BfdUsable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId2BfdUsable indicates if BFD
session for this Multi Topology is usable, that is either not required
or in state UP, as described in RFC6213."
::= { tmnxIsisISAdjEntry 25 }
tmnxIsisISAdjMtId3BfdUsable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId3BfdUsable indicates if BFD
session for this Multi Topology is usable, that is either not required
or in state UP, as described in RFC6213."
::= { tmnxIsisISAdjEntry 26 }
tmnxIsisISAdjMtId4BfdUsable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tmnxIsisISAdjMtId4BfdUsable indicates if BFD
session for this Multi Topology is usable, that is either not required
or in state UP, as described in RFC6213."
::= { tmnxIsisISAdjEntry 27 }
tmnxIsisNotificationObjs OBJECT IDENTIFIER ::= { tmnxIsisObjs 4 }
tmnxIsisNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxIsisNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects seen in the most recent notification this instance of the
IS-IS protocol."
::= { tmnxIsisNotificationObjs 1 }
tmnxIsisNotificationEntry OBJECT-TYPE
SYNTAX TmnxIsisNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry defines variables relevant to notifications for one
instance of the IS-IS protocol."
INDEX {
vRtrID,
isisSysInstance
}
::= { tmnxIsisNotificationTable 1 }
TmnxIsisNotificationEntry ::= SEQUENCE
{
tmnxIsisNotifTrapLSPID OCTET STRING,
tmnxIsisNotifSystemLevel INTEGER,
tmnxIsisNotifPDUFragment OCTET STRING,
tmnxIsisNotifFieldLen Integer32,
tmnxIsisNotifMaxAreaAddress Integer32,
tmnxIsisNotifProtocolVersion Integer32,
tmnxIsisNotifLSPSize Integer32,
tmnxIsisNotifOriginatingBuffSize Integer32,
tmnxIsisNotifProtocolsSupported OCTET STRING,
tmnxIsisNotifNbrSysId OCTET STRING,
tmnxIsisNotifPurgeOriginator SystemID,
tmnxIsisNotifPurgeSource SystemID,
tmnxIsisNotifAdditionalInfo DisplayString,
tmnxIsisNotifCircMtuSize Integer32,
tmnxIsisNotifCircMinReqMtuSize Integer32,
tmnxIsisNotifyIfIndex InterfaceIndex
}
tmnxIsisNotifTrapLSPID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifTrapLSPID is an Octet String that uniquely
identifies a Link State PDU."
::= { tmnxIsisNotificationEntry 1 }
tmnxIsisNotifSystemLevel OBJECT-TYPE
SYNTAX INTEGER {
l1 (1),
l2 (2),
l1l2 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifSystemLevel identifies the level the
notification applies to."
::= { tmnxIsisNotificationEntry 2 }
tmnxIsisNotifPDUFragment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifPDUFragment holds up to the first 64 bytes of
a PDU that triggered the notification."
::= { tmnxIsisNotificationEntry 3 }
tmnxIsisNotifFieldLen OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifFieldLen holds the System ID length reported
in a PDU we received."
::= { tmnxIsisNotificationEntry 4 }
tmnxIsisNotifMaxAreaAddress OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifMaxAreaAddress holds the Max Area Addresses
reported in a PDU we received."
::= { tmnxIsisNotificationEntry 5 }
tmnxIsisNotifProtocolVersion OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifProtocolVersion holds the Protocol version
reported in a PDU we received."
::= { tmnxIsisNotificationEntry 6 }
tmnxIsisNotifLSPSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifLSPSize holds the size of LSP we received that
is too big to forward."
::= { tmnxIsisNotificationEntry 7 }
tmnxIsisNotifOriginatingBuffSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifOriginatingBuffSize holds the size of
tmnxIsisSysOrigL1LSPBuffSize or tmnxIsisSysOrigL2LSPBuffSize
advertised by peer in TLV."
::= { tmnxIsisNotificationEntry 8 }
tmnxIsisNotifProtocolsSupported OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object tmnxIsisNotifProtocolsSupported contains the list of
protocols supported by an adjacent system and may be empty."
::= { tmnxIsisNotificationEntry 9 }
tmnxIsisNotifNbrSysId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..6))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifNbrSysId indicates the system-id
of the neighbor associated with the notification."
::= { tmnxIsisNotificationEntry 10 }
tmnxIsisNotifPurgeOriginator OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifPurgeOriginator indicates the
system-id of the IS that inserted the Purge Originator Identification
(POI) TLV in the purge."
::= { tmnxIsisNotificationEntry 11 }
tmnxIsisNotifPurgeSource OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifPurgeSource indicates the
system-id of the IS from which the purge was received."
::= { tmnxIsisNotificationEntry 12 }
tmnxIsisNotifAdditionalInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifAdditionalInfo is a printable
character string which contains information about the reason why the
notification was generated."
::= { tmnxIsisNotificationEntry 13 }
tmnxIsisNotifCircMtuSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifCircMtuSize indicates the size of
the circuit MTU that is too low to propagate an LSP or SNP."
::= { tmnxIsisNotificationEntry 14 }
tmnxIsisNotifCircMinReqMtuSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifCircMinReqMtuSize indicates the
minimum required size of the circuit MTU to propagate an LSP or SNP."
::= { tmnxIsisNotificationEntry 15 }
tmnxIsisNotifyIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifyIfIndex indicates the ISIS
Interface Index."
::= { tmnxIsisNotificationEntry 16 }
tmnxIsisFailureReasonCode OBJECT-TYPE
SYNTAX INTEGER {
outOfResources (1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxIsisFailureReasonCode indicates the reason for the
last ISIS failure which resulted in it being marked operationally
down.This object is used by the tmnxIsisFailureDisabled notification."
::= { tmnxIsisNotificationObjs 4 }
tmnxIsisNotifPfxSidRangeStartLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxIsisNotifPfxSidRangeStartLbl indicates the start
label of the first segment of a Segment Routing Global Block."
::= { tmnxIsisNotificationObjs 5 }
tmnxIsisNotifPfxSidRangeMaxIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxIsisNotifPfxSidRangeMaxIdx indicates the maximum SID
index of the first segment of a Segment Routing Global Block."
::= { tmnxIsisNotificationObjs 6 }
tmnxIsisNotifPfxSidSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifPfxSidSysID indicates the
system-id of the IS through which this prefix-sid is reachable."
::= { tmnxIsisNotificationObjs 7 }
tmnxIsisNotifyDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object tmnxIsisNotifyDescription is a printable character string."
::= { tmnxIsisNotificationObjs 8 }
tmnxIsisBfdSessSetupFailReason OBJECT-TYPE
SYNTAX INTEGER {
bfdSessNoError (0),
bfdSessFailMaxSessionLimit (1),
bfdSessFailCfgNotProper (2),
bfdSessFailSanityCheck (3),
bfdSessFailGeneral (4),
bfdSessFailInternalProgramming (5),
bfdSessFailCvDiscrNotFound (6),
bfdSessFailMaxPacketRate (7),
bfdSessFailHandleReplaced (8),
bfdSessFailBfdDisabledOnIntf (9)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxIsisBfdSessSetupFailReason indicates the reason for
the BFD setup failure. This object is used by the
tmnxIsisAdjBfdSessionSetupFail notification."
::= { tmnxIsisNotificationObjs 9 }
tmnxIsisNotifSrgbRangeStartLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifSrgbRangeStartLbl indicates the
label at which the SRGB label range starts."
::= { tmnxIsisNotificationObjs 10 }
tmnxIsisNotifSrgbRangeMaxIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifSrgbRangeMaxIdx indicates the
maximum index for the SRGB label range."
::= { tmnxIsisNotificationObjs 11 }
tmnxIsisNotifSrgbAdvRtrSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifSrgbAdvRtrSysID indicates the
system-id of the SRGB advertising router."
::= { tmnxIsisNotificationObjs 12 }
tmnxIsisNotifSrgbLevel OBJECT-TYPE
SYNTAX INTEGER {
level1IS (1),
level2IS (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifSrgbLevel indicates the IS-IS
Level at which the SRGB was learned."
::= { tmnxIsisNotificationObjs 13 }
tmnxIsisNotifSrgbMtId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object tmnxIsisNotifSrgbMtId indicates the multi
topology id number for this SRGB."
::= { tmnxIsisNotificationObjs 14 }
tmnxIsisNotifStatsIndexStatus OBJECT-TYPE
SYNTAX INTEGER {
statsIndexAllocNoError (0),
statsIndexAllocNoResource (1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxIsisNotifStatsIndexStatus indicates the statistic
index allocation status. This object is used by the
tmnxIsisSidStatsIndexAlloc notification."
::= { tmnxIsisNotificationObjs 15 }
tmnxIsisConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 88 }
tmnxIsisCompliances OBJECT IDENTIFIER ::= { tmnxIsisConformance 1 }
tmnxIsisCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems."
MODULE
MANDATORY-GROUPS {
tmnxIsisGroup,
tmnxIsisIfGroup,
tmnxIsisAdjGroup,
tmnxIsisLFAV12v0Group
}
::= { tmnxIsisCompliances 1 }
tmnxIsisNotifyCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for ISIS notifications on Nokia SROS series
systems."
MODULE
MANDATORY-GROUPS {
tmnxIsisNotifyGroup
}
::= { tmnxIsisCompliances 2 }
tmnxIsisV13v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems 13.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisGroup,
tmnxIsisIfGroup,
tmnxIsisAdjGroup,
tmnxIsisLFAV12v0Group,
tmnxIsisV13v0Group
}
::= { tmnxIsisCompliances 3 }
tmnxIsisNotifyV13v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for ISIS notifications on Nokia 7xxx series
systems 13.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisNotifyGroup,
tmnxIsisNotifyV13v0Group
}
::= { tmnxIsisCompliances 4 }
tmnxIsisV14v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems 14.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisGroup,
tmnxIsisIfGroup,
tmnxIsisAdjGroup,
tmnxIsisLFAV12v0Group,
tmnxIsisV13v0Group,
tmnxIsisV14v0Group
}
::= { tmnxIsisCompliances 5 }
tmnxIsisNotifyV14v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for ISIS notifications on Nokia 7xxx series
systems 14.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisNotifyGroup,
tmnxIsisNotifyV13v0Group,
tmnxIsisNotifyV14v0Group
}
::= { tmnxIsisCompliances 6 }
tmnxIsisV15v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems 15.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisGroup,
tmnxIsisIfGroup,
tmnxIsisAdjGroup,
tmnxIsisLFAV12v0Group,
tmnxIsisV13v0Group,
tmnxIsisV14v0Group,
tmnxIsisV15v0Group,
tmnxIsisIgpSC15v0Group,
tmnxIsisObsolete15v0Group
}
::= { tmnxIsisCompliances 7 }
tmnxIsisNotifyV15v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for ISIS notifications on Nokia 7xxx series
systems 15.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisNotifyGroup,
tmnxIsisNotifyV13v0Group,
tmnxIsisNotifyV14v0Group,
tmnxIsisNotifyV15v0Group
}
::= { tmnxIsisCompliances 8 }
tmnxIsisV16v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems 16.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisGroup,
tmnxIsisIfGroup,
tmnxIsisAdjGroup,
tmnxIsisLFAV12v0Group,
tmnxIsisV13v0Group,
tmnxIsisV14v0Group,
tmnxIsisV15v0Group,
tmnxIsisIgpSC15v0Group,
tmnxIsisV16v0Group,
tmnxIsisBier16v0Group
}
::= { tmnxIsisCompliances 9 }
tmnxIsisNotifyV16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for ISIS notifications on Nokia 7xxx series
systems 16.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisNotifyV16v0Group
}
::= { tmnxIsisCompliances 10 }
tmnxIsisV19v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems 19.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisGroup,
tmnxIsisIfGroup,
tmnxIsisAdjGroup,
tmnxIsisLFAV12v0Group,
tmnxIsisV13v0Group,
tmnxIsisV14v0Group,
tmnxIsisV15v0Group,
tmnxIsisIgpSC15v0Group,
tmnxIsisV16v0Group,
tmnxIsisBier16v0Group,
tmnxIsisV19v0Group,
tmnxIsisV19v0ObsoleteGroup
}
::= { tmnxIsisCompliances 11 }
tmnxIsisNotifyV19v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for ISIS notifications on Nokia 7xxx series
systems 19.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisNotifyV19v0Group
}
::= { tmnxIsisCompliances 12 }
tmnxIsisV20v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of ISIS routing protocol on
Nokia 7xxx series systems 20.0 release."
MODULE
MANDATORY-GROUPS {
tmnxIsisV20v0Group
}
::= { tmnxIsisCompliances 13 }
tmnxIsisGroups OBJECT IDENTIFIER ::= { tmnxIsisConformance 2 }
tmnxIsisGroup OBJECT-GROUP
OBJECTS {
tmnxIsisLastEnabledTime,
tmnxIsisAuthKey,
tmnxIsisAuthType,
tmnxIsisAuthCheck,
tmnxIsisExportPolicy1,
tmnxIsisExportPolicy2,
tmnxIsisExportPolicy3,
tmnxIsisExportPolicy4,
tmnxIsisExportPolicy5,
tmnxIsisLspLifetime,
tmnxIsisOverloadTimeout,
tmnxIsisOperState,
tmnxIsisReferenceBw,
tmnxIsisTrafficEng,
tmnxIsisShortCuts,
tmnxIsisSpfHoldTime,
tmnxIsisLastSpfRun,
tmnxIsisGracefulRestart,
tmnxIsisOverloadOnBoot,
tmnxIsisOverloadOnBootTimeout,
tmnxIsisSpfWait,
tmnxIsisSpfInitialWait,
tmnxIsisSpfSecondWait,
tmnxIsisLspMaxWait,
tmnxIsisLspInitialWait,
tmnxIsisLspSecondWait,
tmnxIsisCsnpAuthentication,
tmnxIsisHelloAuthentication,
tmnxIsisPsnpAuthentication,
tmnxIsisGRHelperMode,
tmnxIsisEnableIPv4,
tmnxIsisUnicastImport,
tmnxIsisMulticastImport,
tmnxIsisStrictAdjacencyCheck,
tmnxIsisManualSpfTrigger,
tmnxIsisMultiTopology,
tmnxIsisMultiTopoIPv6Ucast,
tmnxIsisIPv6RoutingTopo,
tmnxIsisSysOrigL1LSPBuffSize,
tmnxIsisSysOrigL2LSPBuffSize,
tmnxIsisLdpSyncAdminState,
tmnxIsisIPv6UnicastImport,
tmnxIsisIPv6MulticastImport,
tmnxIsisAdvertisePassiveOnly,
tmnxIsisDefaultRouteTag,
tmnxIsisSuppressDefault,
tmnxIsisLdpOverRsvp,
tmnxIsisExportLimit,
tmnxIsisExportLimitLogPercent,
tmnxIsisTotalL1ExportedRoutes,
tmnxIsisTotalL2ExportedRoutes,
tmnxIsisRsvpShortcut,
tmnxIsisAdvertiseTunnelLink,
tmnxIsisIidTlv,
tmnxIsisL1MacAddress,
tmnxIsisL2MacAddress,
tmnxIsisSysOperL1LSPBuffSize,
tmnxIsisSysOperL2LSPBuffSize,
tmnxIsisLoopfreeAlternate,
tmnxIsisIPv4McastRoutingTopo,
tmnxIsisIPv6McastRoutingTopo,
tmnxIsisMultiTopoIPv4Mcast,
tmnxIsisMultiTopoIPv6Mcast,
tmnxIsisOverloadMaxMetric,
tmnxIsisOverloadOnBootMaxMetric,
tmnxIsisRouterId,
tmnxIsisAdvRtrCapability,
tmnxIsisHelloPadding,
tmnxIsisLspRefreshInterval,
tmnxIsisIgnoreLspErrors,
tmnxIsisLevelAuthKey,
tmnxIsisLevelAuthType,
tmnxIsisLevelExtPreference,
tmnxIsisLevelPreference,
tmnxIsisLevelWideMetricsOnly,
tmnxIsisLevelOverloadStatus,
tmnxIsisLevelOverloadTimeLeft,
tmnxIsisLevelNumLSPs,
tmnxIsisLevelCsnpAuthentication,
tmnxIsisLevelHelloAuthentication,
tmnxIsisLevelPsnpAuthentication,
tmnxIsisLevelDefMetric,
tmnxIsisLevelIPv6DefMetric,
tmnxIsisLevelLoopfreeAltExclude,
tmnxIsisLevelSpbBridgePriority,
tmnxIsisLevelSpbForwardTreeTopo,
tmnxIsisLevelDefIPv4McastMetric,
tmnxIsisLevelDefIPv6McastMetric,
tmnxIsisLevelAdvRtrCapability,
tmnxIsisLevelAuthKeyChain,
tmnxIsisStatsSpfRuns,
tmnxIsisStatsLSPRegenerations,
tmnxIsisStatsInitiatedPurges,
tmnxIsisStatsLSPRecd,
tmnxIsisStatsLSPDrop,
tmnxIsisStatsLSPSent,
tmnxIsisStatsLSPRetrans,
tmnxIsisStatsIIHRecd,
tmnxIsisStatsIIHDrop,
tmnxIsisStatsIIHSent,
tmnxIsisStatsIIHRetrans,
tmnxIsisStatsCSNPRecd,
tmnxIsisStatsCSNPDrop,
tmnxIsisStatsCSNPSent,
tmnxIsisStatsCSNPRetrans,
tmnxIsisStatsPSNPRecd,
tmnxIsisStatsPSNPDrop,
tmnxIsisStatsPSNPSent,
tmnxIsisStatsPSNPRetrans,
tmnxIsisStatsUnknownRecd,
tmnxIsisStatsUnknownDrop,
tmnxIsisStatsUnknownSent,
tmnxIsisStatsUnknownRetrans,
tmnxIsisStatsCSPFRequests,
tmnxIsisStatsCSPFDroppedRequests,
tmnxIsisStatsCSPFPathsFound,
tmnxIsisStatsCSPFPathsNotFound,
tmnxIsisStatsLfaRuns,
tmnxIsisHostName,
tmnxIsisPathMetric,
tmnxIsisPathSNPA,
tmnxIsisPathLfaIfIndex,
tmnxIsisPathLfaNHop,
tmnxIsisPathLfaMetric,
tmnxIsisPathLfaType,
tmnxIsisPathRouteType,
tmnxIsisLSPSeq,
tmnxIsisLSPChecksum,
tmnxIsisLSPLifetimeRemain,
tmnxIsisLSPVersion,
tmnxIsisLSPPktType,
tmnxIsisLSPPktVersion,
tmnxIsisLSPMaxArea,
tmnxIsisLSPSysIdLen,
tmnxIsisLSPAttributes,
tmnxIsisLSPUsedLen,
tmnxIsisLSPAllocLen,
tmnxIsisLSPBuff,
tmnxIsisLSPZeroRLT,
tmnxIsisSpfLogRunTime,
tmnxIsisSpfLogL1Nodes,
tmnxIsisSpfLogL2Nodes,
tmnxIsisSpfLogEventCount,
tmnxIsisSpfLogLastTriggerLSPId,
tmnxIsisSpfLogTriggerReason,
tmnxIsisSpfLogType,
tmnxIsisSummRowStatus,
tmnxIsisSummLevel,
tmnxIsisSummRouteTag,
tmnxIsisLfaNodesCovered,
tmnxIsisLfaTotalNodes,
tmnxIsisLfaNodeCoverage,
tmnxIsisLfaIPv4NodesCovered,
tmnxIsisLfaIPv4TotalNodes,
tmnxIsisLfaIPv4Coverage,
tmnxIsisLfaIPv6NodesCovered,
tmnxIsisLfaIPv6TotalNodes,
tmnxIsisLfaIPv6Coverage,
tmnxIsisOperRouterId,
tmnxIsisPrefixSidType,
tmnxIsisPrefixSidFlags,
tmnxIsisPrefixSidSRMS,
tmnxIsisAuthKeyChain,
tmnxIsisStatsPartSpfRuns,
tmnxIsisStatsPartSpfTimeStamp,
tmnxIsisStatsPartLfaRuns,
tmnxIsisStatsPartLfaTimeStamp,
tmnxIsisStatsLfaTimeStamp,
tmnxIsisStatsSpfTimeStamp,
tmnxIsisNotifTrapLSPID,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifPDUFragment,
tmnxIsisNotifFieldLen,
tmnxIsisNotifMaxAreaAddress,
tmnxIsisNotifProtocolVersion,
tmnxIsisNotifLSPSize,
tmnxIsisNotifOriginatingBuffSize,
tmnxIsisNotifProtocolsSupported,
tmnxIsisStatsRlfaRuns,
tmnxIsisStatsRlfaTimeStamp
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 12.0 Nokia SROS series systems."
::= { tmnxIsisGroups 1 }
tmnxIsisIfGroup OBJECT-GROUP
OBJECTS {
tmnxIsisIfRowStatus,
tmnxIsisIfLastChanged,
tmnxIsisIfAdminState,
tmnxIsisIfOperState,
tmnxIsisIfCsnpInterval,
tmnxIsisIfHelloAuthKey,
tmnxIsisIfHelloAuthType,
tmnxIsisIfLspPacingInterval,
tmnxIsisIfCircIndex,
tmnxIsisIfRetransmitInterval,
tmnxIsisIfTypeDefault,
tmnxIsisIfEnableBfd,
tmnxIsisIfIPv6Unicast,
tmnxIsisIfTeMetric,
tmnxIsisIfTeState,
tmnxIsisIfAdminGroup,
tmnxIsisIfLdpSyncState,
tmnxIsisIfLdpSyncMaxMetric,
tmnxIsisIfLdpSyncTimerState,
tmnxIsisIfLdpSyncTimeLeft,
tmnxIsisIfRouteTag,
tmnxIsisIfIPv6EnableBfd,
tmnxIsisIfHelloAuth,
tmnxIsisIfLoopfreeAltExclude,
tmnxIsisIfOperType,
tmnxIsisIfIPv4Mcast,
tmnxIsisIfIPv6Mcast,
tmnxIsisIfBerState,
tmnxIsisIfIPv4IncludeBfdTlv,
tmnxIsisIfIPv6IncludeBfdTlv,
tmnxIsisIfHelloAuthKeyChain,
tmnxIsisIfLevelLastChangeTime,
tmnxIsisIfLevelHelloAuthKey,
tmnxIsisIfLevelHelloAuthType,
tmnxIsisIfLevelPassive,
tmnxIsisIfLevelNumAdjacencies,
tmnxIsisIfLevelISPriority,
tmnxIsisIfLevelHelloTimer,
tmnxIsisIfLevelAdminMetric,
tmnxIsisIfLevelOperMetric,
tmnxIsisIfLvlIPv6UcastAdmMet,
tmnxIsisIfLvlIPv6UcastOperMet,
tmnxIsisIfLvlIPv4McastAdmMetric,
tmnxIsisIfLvlIPv6McastAdmMetric,
tmnxIsisIfLevelLinkGroupName,
tmnxIsisIfLevelSdOffset,
tmnxIsisIfLevelSfOffset,
tmnxIsisIfLvlIPv4McastOperMetric,
tmnxIsisIfLvlIPv6McastOperMetric,
tmnxIsisIfLevelHelloAuthKeyChain
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS interface objects
on Nokia SROS series systems."
::= { tmnxIsisGroups 2 }
tmnxIsisAdjGroup OBJECT-GROUP
OBJECTS {
tmnxIsisISAdjExpiresIn,
tmnxIsisISAdjCircLevel,
tmnxIsisISAdjNeighborIP,
tmnxIsisISAdjRestartSupport,
tmnxIsisISAdjRestartStatus,
tmnxIsisISAdjRestartSupressed,
tmnxIsisISAdjNumRestarts,
tmnxIsisISAdjLastRestartTime,
tmnxIsisISAdjNeighborIPv6Type,
tmnxIsisISAdjNeighborIPv6,
tmnxIsisISAdjMtEnabled,
tmnxIsisISAdjMtId0,
tmnxIsisISAdjMtId2,
tmnxIsisISAdjMtId3,
tmnxIsisISAdjMtId4,
tmnxIsisISAdjIpv4SidType,
tmnxIsisISAdjIpv4SidValue,
tmnxIsisISAdjIpv6SidType,
tmnxIsisISAdjIpv6SidValue,
tmnxIsisISAdjMtId0BfdRequired,
tmnxIsisISAdjMtId2BfdRequired,
tmnxIsisISAdjMtId3BfdRequired,
tmnxIsisISAdjMtId4BfdRequired,
tmnxIsisISAdjMtId0BfdUsable,
tmnxIsisISAdjMtId2BfdUsable,
tmnxIsisISAdjMtId3BfdUsable,
tmnxIsisISAdjMtId4BfdUsable
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS adjacencies objects
on Nokia SROS series systems."
::= { tmnxIsisGroups 3 }
tmnxIsisLFAV12v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisExLastChanged,
tmnxIsisLFAExcludePolicy1,
tmnxIsisLFAExcludePolicy2,
tmnxIsisLFAExcludePolicy3,
tmnxIsisLFAExcludePolicy4,
tmnxIsisLFAExcludePolicy5,
tmnxIsisIfRouteNHTemplate
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
Nokia 12.0 release of SROS series systems."
::= { tmnxIsisGroups 4 }
tmnxIsisV13v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisSuppressAttachedBit,
tmnxIsisPrefixSidRangeType,
tmnxIsisPrefixSidRangeStartLabel,
tmnxIsisPrefixSidRangeMaxIdx,
tmnxIsisSrAdminState,
tmnxIsisTunnelTablePreference,
tmnxIsisRemoteLoopfreeAlternate,
tmnxIsisIfIpv4SidType,
tmnxIsisIfIpv4SidValue,
tmnxIsisIfIpv6SidType,
tmnxIsisIfIpv6SidValue,
tmnxIsisStatsSidLabelRangeErrs,
tmnxIsisStatsSidDupErrs,
tmnxIsisRibPriorityListHigh,
tmnxIsisRibPriorityListHighTag,
tmnxIsisIfDefaultInstance,
tmnxIsisTunnelMtu,
tmnxIsisMaxPqCost,
tmnxIsisIgnoreNarrowMetric,
tmnxIsisPoiTlv,
tmnxIsisIfLevelLspTxQCount
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 13.0 Nokia SROS series systems."
::= { tmnxIsisGroups 5 }
tmnxIsisV14v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisSystemId,
tmnxIsisPrefixLimit,
tmnxIsisPfxLimitOverloadTimeout,
tmnxIsisPrefixLimitThreshold,
tmnxIsisPrefixLimitLogOnly,
tmnxIsisPfxLimitOverloadTimeLeft,
tmnxIsisImportPolicy1,
tmnxIsisImportPolicy2,
tmnxIsisImportPolicy3,
tmnxIsisImportPolicy4,
tmnxIsisImportPolicy5,
tmnxIsisIfLBAdminWeight,
tmnxIsisLevelLSPBuffSize,
tmnxIsisLevelHelloPadding,
tmnxIsisIfHelloPadding,
tmnxIsisIfLevelHelloPadding,
tmnxIsisSrAdjSidHold,
tmnxIsisDatabaseExport,
tmnxIsisDbExportIdentifierSet,
tmnxIsisDbExportIdentifierLow,
tmnxIsisDbExportIdentifierHigh,
tmnxIsisBgpLsIdentifierSet,
tmnxIsisBgpLsIdentifier,
tmnxIsisLevelDbExportExclude,
tmnxIsisIfSidProtection,
tmnxIsisSrExportTunnelTableProt,
tmnxIsisSRMapServLastCh,
tmnxIsisSRMapServAdminState,
tmnxIsisSRMSSidMapRowStatus,
tmnxIsisSRMSSidMapLastCh,
tmnxIsisSRMSSidMapPrefixType,
tmnxIsisSRMSSidMapPrefix,
tmnxIsisSRMSSidMapPrefixLength,
tmnxIsisSRMSSidMapNodeSidRange,
tmnxIsisSRMSSidMapFlags,
tmnxIsisSRMSSidMapLevel,
tmnxIsisOverloadExportInterlevel,
tmnxIsisOverloadExportExternal,
tmnxIsisPrefixSidSRMSSelected,
tmnxIsisStandardMultiInstance,
tmnxIsisDbAsn
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 14.0 Nokia SROS series systems."
::= { tmnxIsisGroups 6 }
tmnxIsisV15v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisTiLfa,
tmnxIsisMaxSrFrrLabels,
tmnxIsisPrefixAttributesTlv,
tmnxIsisStatsTiLfaRuns,
tmnxIsisStatsTiLfaTimeStamp,
tmnxIsisSRLfaStatsTotalSid,
tmnxIsisSRLfaStatsLfaCovered,
tmnxIsisSRLfaStatsRLfaCovered,
tmnxIsisSRLfaStatsTiLfaCovered,
tmnxIsisLevelMaxOperLSPBuffSize,
tmnxIsisIfIpv4SidClearNFlag,
tmnxIsisIfIpv6SidClearNFlag,
tmnxIsisSRMSSidMapClearNFlag,
tmnxIsisLspRefreshHalfLifetime,
tmnxIsisSrEntropyLabel,
tmnxIsisOverrideTunnelElc
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 15.0 Nokia SROS series systems."
::= { tmnxIsisGroups 7 }
tmnxIsisIgpSC15v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisIgpSCAdminState,
tmnxIsisIgpSCTunnNextHopLstCh,
tmnxIsisIgpSCTNHResolution,
tmnxIsisIgpSCTNHResFilterRsvp,
tmnxIsisIgpSCTNHResFilterSrTe
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS IGP shortcut
objects on release 15.0 Nokia SROS series systems."
::= { tmnxIsisGroups 8 }
tmnxIsisObsolete15v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisRsvpShortcut
}
STATUS current
DESCRIPTION
"The group of objects in TIMETRA-ISIS-MIB which are obsoleted."
::= { tmnxIsisGroups 9 }
tmnxIsisBier16v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisLevelBierTemplate,
tmnxIsisLevelBierTemplAdminState
}
STATUS current
DESCRIPTION
"The group of objects supporting management of BIER ISIS
objects on release 16.0 Nokia SROS series systems."
::= { tmnxIsisGroups 10 }
tmnxIsisNotifyObjsGroup OBJECT-GROUP
OBJECTS {
tmnxIsisNotifNbrSysId,
tmnxIsisFailureReasonCode,
tmnxIsisBfdSessSetupFailReason
}
STATUS current
DESCRIPTION
"The group of notification objects supporting management of ISIS
notification objects on Nokia SROS series systems."
::= { tmnxIsisGroups 100 }
tmnxIsisNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxIsisDatabaseOverload,
tmnxIsisManualAddressDrops,
tmnxIsisCorruptedLSPDetected,
tmnxIsisMaxSeqExceedAttempt,
tmnxIsisIDLenMismatch,
tmnxIsisMaxAreaAddrsMismatch,
tmnxIsisOwnLSPPurge,
tmnxIsisSequenceNumberSkip,
tmnxIsisAutTypeFail,
tmnxIsisAuthFail,
tmnxIsisVersionSkew,
tmnxIsisAreaMismatch,
tmnxIsisRejectedAdjacency,
tmnxIsisLSPTooLargeToPropagate,
tmnxIsisOrigLSPBufSizeMismatch,
tmnxIsisProtoSuppMismatch,
tmnxIsisAdjacencyChange,
tmnxIsisCircIdExhausted,
tmnxIsisAdjRestartStatusChange,
tmnxIsisLdpSyncTimerStarted,
tmnxIsisLdpSyncExit,
tmnxIsisExportLimitReached,
tmnxIsisExportLimitWarning,
tmnxIsisRoutesExpLmtDropped,
tmnxIsisSidError,
tmnxIsisSidNotInLabelRange,
tmnxIsisRejectedAdjacencySid,
tmnxIsisFailureDisabled,
tmnxIsisAdjBfdSessionSetupFail
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of ISIS notifications
on Nokia SROS series systems."
::= { tmnxIsisGroups 101 }
tmnxIsisNotifyObjsV13v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisNotifPfxSidRangeStartLbl,
tmnxIsisNotifPfxSidRangeMaxIdx,
tmnxIsisNotifPfxSidSysID,
tmnxIsisNotifyDescription,
tmnxIsisNotifPurgeOriginator,
tmnxIsisNotifPurgeSource,
tmnxIsisNotifAdditionalInfo,
tmnxIsisNotifSrgbRangeStartLbl,
tmnxIsisNotifSrgbRangeMaxIdx,
tmnxIsisNotifSrgbAdvRtrSysID,
tmnxIsisNotifSrgbLevel,
tmnxIsisNotifSrgbMtId
}
STATUS current
DESCRIPTION
"The group of notification objects supporting management of ISIS
notification objects on Nokia 7xxx systems 13.0 release."
::= { tmnxIsisGroups 102 }
tmnxIsisNotifyV13v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxIsisSidError,
tmnxIsisSidNotInLabelRange,
tmnxIsisLSPPurge,
tmnxIsisSrgbBadLabelRange
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of ISIS notifications
on Nokia 7xxx series systems 13.0 release."
::= { tmnxIsisGroups 103 }
tmnxIsisNotifyV14v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxIsisPfxLimitOverloadWarning
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of ISIS that were
added in release 14.0 on Nokia 7xxx series systems."
::= { tmnxIsisGroups 104 }
tmnxIsisNotifyObjsV15v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisNotifCircMtuSize,
tmnxIsisNotifCircMinReqMtuSize
}
STATUS current
DESCRIPTION
"The group of notification objects supporting management of ISIS
notification objects on Nokia 7xxx systems 15.0 release."
::= { tmnxIsisGroups 105 }
tmnxIsisNotifyV15v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxIsisCircMtuTooLow
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of ISIS that were
added in release 15.0 on Nokia 7xxx series systems."
::= { tmnxIsisGroups 106 }
tmnxIsisV16v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisIfIpv4AdjSidType,
tmnxIsisIfIpv4AdjSidValue,
tmnxIsisIfIpv6AdjSidType,
tmnxIsisIfIpv6AdjSidValue,
tmnxIsisAdjSetFamilyType,
tmnxIsisAdjSetIdLstCh,
tmnxIsisAdjSetParallel,
tmnxIsisAdjSetAdvertise,
tmnxIsisAdjSetSidType,
tmnxIsisAdjSetSidValue,
tmnxIsisAdjSetRowStatus,
tmnxIsisAdjSetDynSidValue,
tmnxIsisAdjSetTunlDestType,
tmnxIsisAdjSetTunlDestIp,
tmnxIsisAdjSetNeighborSysID,
tmnxIsisAdjSetMembersCount,
tmnxIsisAdjSetActiveMembers,
tmnxIsisAdjSetUpTime,
tmnxIsisAdjSetStatus,
tmnxIsisIfAdjSetIdLstCh,
tmnxIsisIfAdjSetRowStatus,
tmnxIsisAdjSetNhop,
tmnxIsisAdjSetNhopType,
tmnxIsisAdjSetNhopUsage,
tmnxIsisAdjSetNhopLevel,
tmnxIsisAdjSetMtu,
tmnxIsisSrlbReservedLblBlockName,
tmnxIsisRemoteLfaNodeProtect,
tmnxIsisRemoteLfaMaxPqNodes,
tmnxIsisTiLfaNodeProtect,
tmnxIsisSrMicroLoopAvoidance,
tmnxIsisSrMicroLoopAvdFibDelay
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 16.0 Nokia SROS series systems."
::= { tmnxIsisGroups 107 }
tmnxIsisNotifyObjsV16v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisNotifyIfIndex
}
STATUS current
DESCRIPTION
"The group of notification objects supporting management of ISIS
notification objects on Nokia 7xxx systems 16.0 release."
::= { tmnxIsisGroups 108 }
tmnxIsisNotifyV16v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxIsisRejectedAdjacencySet
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of ISIS that were
added in release 16.0 on Nokia 7xxx series systems."
::= { tmnxIsisGroups 109 }
tmnxIsisV19v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisLspMinRemainingLifetime,
tmnxIsisReferenceBwU64High,
tmnxIsisReferenceBwU64Low,
tmnxIsisRouteNhIPType,
tmnxIsisRouteNhIP,
tmnxIsisRouteNhLevel,
tmnxIsisRouteNhSpfRunNumber,
tmnxIsisRouteNhMetric,
tmnxIsisRouteNhType,
tmnxIsisRouteNhSysID,
tmnxIsisRouteNhTag,
tmnxIsisRouteNhBkupFlags,
tmnxIsisRouteNhBkupCidrType,
tmnxIsisRouteNhBkupIpType,
tmnxIsisRouteNhBkupIP,
tmnxIsisRouteNhBkupMetric,
tmnxIsisRouteNhCidrType,
tmnxIsisRouteNhOwner,
tmnxIsisRouteNhOwnerAuxInfo,
tmnxIsisRouteNhBkupType,
tmnxIsisRouteNhBkupOwner,
tmnxIsisRouteNhBkupOwnerAuxInfo,
tmnxIsisRouteNhSidFlags,
tmnxIsisRouteNhSidValue,
tmnxIsisRouteNhRouteStatus,
tmnxIsisRouteNhNhopStatus,
tmnxIsisEgressStatsNodeSid,
tmnxIsisEgressStatsAdjSid,
tmnxIsisEgressStatsAdjSet,
tmnxIsisIngressStatsNodeSid,
tmnxIsisIngressStatsAdjSid,
tmnxIsisIngressStatsAdjSet,
tmnxIsisSidStatsSidType,
tmnxIsisSidStatsPrefixType,
tmnxIsisSidStatsPrefix,
tmnxIsisSidStatsPrefixLength,
tmnxIsisSidStatsIfIndex,
tmnxIsisSidStatsAdjSet,
tmnxIsisSidStatsIngressOperState,
tmnxIsisSidStatsIngressOctets,
tmnxIsisSidStatsIngressPackets,
tmnxIsisSidStatsEgressOperState,
tmnxIsisSidStatsEgressOctets,
tmnxIsisSidStatsEgressPackets,
tmnxIsisTEIpv6,
tmnxIsisTEApplicationLinkAttr,
tmnxIsisTEApplLegacy,
tmnxIsisOperIpv6TERouterIdType,
tmnxIsisOperIpv6TERouterId,
tmnxIsisSrClassForwarding,
tmnxIsisLoopfreeAltAugmRteTable
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 19.0 Nokia SROS series systems."
::= { tmnxIsisGroups 110 }
tmnxIsisNotifyV19v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxIsisCorruptRemainingLifetime,
tmnxIsisSidStatsIndexAlloc
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of ISIS that were
added in release 19.0 on Nokia 7xxx series systems."
::= { tmnxIsisGroups 111 }
tmnxIsisNotifyObjsV19v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisNotifStatsIndexStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting ISIS notifications, added in the 19.0
release of Nokia SROS series systems."
::= { tmnxIsisGroups 112 }
tmnxIsisV19v0ObsoleteGroup OBJECT-GROUP
OBJECTS {
tmnxIsisRouteLevel,
tmnxIsisRouteSpfRunNumber,
tmnxIsisRouteMetric,
tmnxIsisRouteType,
tmnxIsisRouteNHopSysID,
tmnxIsisRouteTag,
tmnxIsisRouteBkupFlags,
tmnxIsisRouteBkupNextHopTy,
tmnxIsisRouteBkupNextHopType,
tmnxIsisRouteBkupNextHop,
tmnxIsisRouteBkupMetric,
tmnxIsisRouteNextHopType,
tmnxIsisRouteNextHopOwner,
tmnxIsisRouteNHOwnerAuxInfo,
tmnxIsisRouteBkupNHType,
tmnxIsisRouteBkupNHOwner,
tmnxIsisRouteBkupNHOwnAxInfo,
tmnxIsisRouteSidFlags,
tmnxIsisRouteSidValue,
tmnxIsisRouteStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects that
are obsoleted in release 19.0 Nokia SROS series systems."
::= { tmnxIsisGroups 113 }
tmnxIsisV20v0Group OBJECT-GROUP
OBJECTS {
tmnxIsisSrLastChanged,
tmnxIsisSrMsdOverrideBmi,
tmnxIsisSrMsdOverrideErld
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ISIS system objects on
release 20.0 Nokia SROS series systems."
::= { tmnxIsisGroups 114 }
tmnxIsisNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 88 }
tmnxIsisNotifications OBJECT IDENTIFIER ::= { tmnxIsisNotifyPrefix 0 }
tmnxIsisDatabaseOverload NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
isisSysL1State,
isisSysL2State,
tmnxIsisNotifyDescription,
tmnxIsisLevelOverloadStatus
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisDatabaseOverload notification is generated when
the system enters or leaves the Overload state.
[EFFECT] Database is overloaded.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 1 }
tmnxIsisManualAddressDrops NOTIFICATION-TYPE
OBJECTS {
isisManAreaAddrExistState
}
STATUS current
DESCRIPTION
"[CAUSE] This notification is generated when one of the manual area
addresses assigned to this system is ignored when computing routes.
The object isisManAreaAddrExistState describes the area that has been
dropped.
This notification is edge triggered, and should not be regenerated
until an address that was used in the previous computation has been
dropped.
[EFFECT] Assigned manual area address is ignored for computing routes.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 2 }
tmnxIsisCorruptedLSPDetected NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifTrapLSPID
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisCorruptedLSPDetected notification is generated
when we find that and LSP that was stored in memory has become
corrupted.
We forward an LSP ID. We may have independent knowledge of the ID, but
in some implementations there is a chance that the ID itself will be
corrupted.
[EFFECT] LSP is dropped.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 3 }
tmnxIsisMaxSeqExceedAttempt NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
tmnxIsisNotifTrapLSPID
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisMaxSeqExceedAttempt notification is generated when
the sequence number on an LSP wraps the 32 bit sequence counter, we
purge and wait to re-announce this information. Since these should not
be generated rapidly, we generate an event each time this happens.
A possible cause could be that the same system-id is configured on
multiple nodes; when 2 nodes have the same system-id they both keep
incrementing its LSP sequence number causing the sequence counter to
rollover.
While the first 6 bytes of the LSPID are ours, the other two contain
useful information.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 4 }
tmnxIsisIDLenMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifFieldLen,
vRtrIfIndex,
tmnxIsisNotifPDUFragment
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisIDLenMismatch notification is sent when we receive
a PDU with a different value of the System ID Length.
This notification includes the index to identify the circuit where we
saw the PDU and the header of the PDU which may help a network manager
identify the source of the confusion.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from what seem to be the same
source. This decision is up to the agent to make, and may be based on
the circuit or on some MAC level information.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 5 }
tmnxIsisMaxAreaAddrsMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifMaxAreaAddress,
vRtrIfIndex,
tmnxIsisNotifPDUFragment
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisMaxAreaAddrsMismatch notification is sent when we
receive a PDU with a different value of the Maximum Area Addresses.
This notification includes the header of the packet, which may help a
network manager identify the source of the confusion.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from what seem to be the same
source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 6 }
tmnxIsisOwnLSPPurge NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisNotifTrapLSPID,
tmnxIsisNotifSystemLevel
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisOwnLSPPurge notification is sent when we receive a
PDU with our SystemID and zero age.
This notification includes the circuit Index if available, which may
help a network manager identify the source of the confusion.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 7 }
tmnxIsisSequenceNumberSkip NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifTrapLSPID,
vRtrIfIndex,
tmnxIsisNotifSystemLevel
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisSequenceNumberSkip notification is sent when we
need to increase the sequence number by more than one.
When we receive an LSP with out System ID and different contents, we
may need to reissue the LSP with a higher sequence number.
If two Intermediate Systems are configured with the same System ID,
this notification will fire.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 8 }
tmnxIsisAutTypeFail NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
tmnxIsisNotifPDUFragment,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisAutTypeFail notification is sent when we receive a
PDU with the wrong authentication type field.
This notification includes the header of the packet, which may help a
network manager identify the source of the confusion.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from what seem to be the same
source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 9 }
tmnxIsisAuthFail NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
tmnxIsisNotifPDUFragment,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisAuthFail notification is sent when we receive a
PDU with incorrect authentication information field.
This notification includes the header of the packet, which may help a
network manager identify the source of the confusion.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from what seem to be the same
source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 10 }
tmnxIsisVersionSkew NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifProtocolVersion,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifPDUFragment,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisVersionSkew notification is sent when we receive a
Hello PDU from an IS running a different version of the protocol.
This notification includes the header of the packet, which may help a
network manager identify the source of the confusion.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from what seem to be the same
source. This decision is up to the agent to make, and may be based on
the circuit or on some MAC level information.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 11 }
tmnxIsisAreaMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifLSPSize,
tmnxIsisNotifSystemLevel,
vRtrIfIndex,
tmnxIsisNotifPDUFragment
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisAreaMismatch notification is sent when we receive
a Hello PDU from an IS which does not share any area address.
This notification includes the header of the packet, which may
help a network manager identify the source of the confusion.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from what seem to be the same
source. This decision is up to the agent to make, and may be based on
the circuit or on some MAC level information.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 12 }
tmnxIsisRejectedAdjacency NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisRejectedAdjacency notification is sent when we
receive a Hello PDU from an IS, but do not establish an adjacency due
to a lack of resources.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from the same source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 13 }
tmnxIsisLSPTooLargeToPropagate NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifLSPSize,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifTrapLSPID,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisLSPTooLargeToPropagate notification is sent when
we attempt to propagate an LSP which is larger than the
dataLinkBlockSize for a circuit.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from the same source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 14 }
tmnxIsisOrigLSPBufSizeMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifOriginatingBuffSize,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifTrapLSPID,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisOrigLSPBufSizeMismatch notification is sent when
a Level 1 LSP or Level 2 LSP is received which is larger than
the local value for tmnxIsisLevelLSPBuffSize or
tmnxIsisSysOrigL1LSPBuffSize or tmnxIsisSysOrigL2LSPBuffSize
respectively, or when a Level 1 LSP or Level2 LSP is received
containing the originatingLSPBufferSize option and the value in
the PDU option field does not match the local value
for tmnxIsisLevelLSPBuffSize or tmnxIsisSysOrigL1LSPBuffSize or
tmnxIsisSysOrigL2LSPBuffSize respectively. We pass up the size from
the option field or the size of the LSP that exceeds our
configuration.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from the same source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 15 }
tmnxIsisProtoSuppMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifProtocolsSupported,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifTrapLSPID,
vRtrIfIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisProtoSuppMismatch notification is sent when a
non-pseudonode segment 0 LSP is received that has no matching
protocols supported.
This may be because the system does not generate the field, or because
there are no common elements.
The list of protocols supported should be included in the
notification: it may be empty if the TLV is not supported, or if the
TLV is empty.
This should be an edge-triggered notification. We should not send a
second notification about PDUs received from the same source.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 16 }
tmnxIsisAdjacencyChange NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
vRtrIfIndex,
tmnxIsisNotifTrapLSPID,
isisISAdjState
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisAdjacencyChange notification is sent when an
adjacency changes state, entering or leaving state up.
The first 6 bytes of the tmnxIsisNotifTrapLSPID are the SystemID of
the adjacent IS.
The isisISAdjState is the new state of the adjacency.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 17 }
tmnxIsisCircIdExhausted NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisNotifSystemLevel
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisCircIdExhausted notification is sent when the
specific ISIS level cannot be started on a LAN interface as a unique
circid could not be assigned due to the exhaustion of the circid
space.
This could happen only on the broadcast interfaces.
[EFFECT] In such a case the interface is marked operationally down.
[RECOVERY] When an operationally up interface is deleted, the circid
can be reused by any interface which is waiting to receive a unique
circid."
::= { tmnxIsisNotifications 18 }
tmnxIsisAdjRestartStatusChange NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
vRtrIfIndex,
tmnxIsisISAdjRestartStatus
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisAdjRestartStatusChange notification is sent when
an adjacency's graceful restart status changes.
The tmnxIsisISAdjRestartStatus is the new graceful restart state of
the adjacency.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 19 }
tmnxIsisLdpSyncTimerStarted NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisIfLdpSyncTimerState
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisLdpSyncTimerStarted notification is sent when the
vRtrIfLdpSyncTimer is started.
The timer is started from the time the LDP session to the neighbor is
up over the interface.
[EFFECT] This allows for the label FEC bindings to be exchanged.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 20 }
tmnxIsisLdpSyncExit NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisIfLdpSyncTimerState
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisLdpSyncExit notification is sent when IGP-LDP
synchronization has stopped.
The cause of this event is indicated by tmnxIsisIfLdpSyncTimerState,
one of them being expiry of vRtrIfLdpSyncTimer.
[EFFECT] The IGP link metric is restored to normal levels.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 21 }
tmnxIsisExportLimitReached NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
tmnxIsisExportLimit
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisExportLimitReached notification is sent when the
total number of exported routes for the level is equal to the
configured limit for exported routes, tmnxIsisExportLimit.
[EFFECT] Additional routes would not be exported into this ISIS level
from the route table.
[RECOVERY] Change ISIS export policy."
::= { tmnxIsisNotifications 22 }
tmnxIsisExportLimitWarning NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
tmnxIsisExportLimit,
tmnxIsisExportLimitLogPercent
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisExportLimitWarning notification is sent when the
total number of exported routes or the level is equal to the
configured percent, tmnxIsisExportLimitLogPercent of the export limit,
tmnxIsisExportLimit.
Additional routes will continue to be exported into this ISIS level
from the route table till the export limit is reached.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 23 }
tmnxIsisRoutesExpLmtDropped NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
tmnxIsisExportLimit
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisRoutesExpLmtDropped notification is sent when the
total number of exported routes from the route table to this ISIS
level drops below the configured export limit, tmnxIsisExportLimit.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 24 }
tmnxIsisFailureDisabled NOTIFICATION-TYPE
OBJECTS {
tmnxIsisFailureReasonCode
}
STATUS current
DESCRIPTION
"[CAUSE] A tmnxIsisFailureDisabled notification is generated when ISIS
is operationally brought down. Reason for the failure is indicated by
tmnxIsisFailureReasonCode.
[EFFECT] ISIS is now operationally down.
[RECOVERY] ISIS will auto restart."
::= { tmnxIsisNotifications 28 }
tmnxIsisSidError NOTIFICATION-TYPE
OBJECTS {
tmnxIsisPrefixSidType,
tmnxIsisPrefixSidFlags,
tmnxIsisNotifyDescription
}
STATUS current
DESCRIPTION
"[CAUSE] This notification is generated when ISIS receives an IOM or
CPM failure (system exhausted ILM, NHLFE, duplicate SID) while
resolving and programming a received prefix SID.
[EFFECT] The Segment Routing tunnel corresponding to this SID will not
be programmed.
[RECOVERY] In case of system exhaustion, the IGP instance goes into
overload. The operator must manually clear the IGP overload condition
after freeing resources. IGP will attempt to program at the next SPF
all tunnels which previously failed the programming operation"
::= { tmnxIsisNotifications 29 }
tmnxIsisSidNotInLabelRange NOTIFICATION-TYPE
OBJECTS {
tmnxIsisPrefixSidType,
tmnxIsisPrefixSidFlags,
tmnxIsisNotifPfxSidRangeStartLbl,
tmnxIsisNotifPfxSidRangeMaxIdx,
tmnxIsisNotifPfxSidSysID
}
STATUS current
DESCRIPTION
"[CAUSE] This notification is generated when ISIS receives a SID which
is not within the label range of the nhop router.
[EFFECT] The Segment Routing tunnel corresponding to this SID will not
be programmed.
[RECOVERY] Increase the label range or change the SID index to be
within the current label range."
::= { tmnxIsisNotifications 30 }
tmnxIsisRejectedAdjacencySid NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifSystemLevel,
vRtrIfIndex,
tmnxIsisNotifyDescription
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisRejectedAdjacencySid notification is sent when we
do not establish an adjacency SID due to a lack of resources.
This should be an edge-triggered notification. We should not send a
second notification about adjacency SID allocation failure for the
same adjacency.
[EFFECT] No effect.
[RECOVERY] When an operationally up interface is deleted, the ADJ-SID
can be reused by any interface which is waiting to receive an ADJ-SID."
::= { tmnxIsisNotifications 31 }
tmnxIsisLSPPurge NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisNotifTrapLSPID,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifPurgeOriginator,
tmnxIsisNotifPurgeSource,
tmnxIsisNotifAdditionalInfo
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisLSPPurge notification is sent when a LSP is
purged.
This notification includes the system ID of the originator, or the
upstream source of the purge, which may help a network manager to
locate the origin of the purge and thus the cause of the purge.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 32 }
tmnxIsisPfxLimitOverloadWarning NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifAdditionalInfo
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisPfxLimitOverloadWarning notification is sent when
the number of prefixes in the system reaches the
tmnxIsisPrefixLimitThreshold or the tmnxIsisPrefixLimit.
[EFFECT] When tmnxIsisPrefixLimit is not yet reached, but the
tmnxIsisPrefixLimitThreshold is reached there is no direct effect; but
when the number of prefixes grows the system might go into overload.
When the tmnxIsisPrefixLimit is reached and the object
tmnxIsisPrefixLimitLogOnly is false, IS-IS will be in overload. There
is no direct effect when the object tmnxIsisPrefixLimitLogOnly is
true.
[RECOVERY] Increase the IS-IS prefix limit."
::= { tmnxIsisNotifications 33 }
tmnxIsisAdjBfdSessionSetupFail NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifTrapLSPID,
tmnxIsisBfdSessSetupFailReason
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisAdjBfdSessionSetupFail notification is sent when
BFD session setup fails.
The first 6 bytes of the tmnxIsisNotifTrapLSPID are the SystemID of
the adjacent IS.
[EFFECT] The system can not setup the BFD session.
[RECOVERY] Depending on the tmnxIsisBfdSessSetupFailReason, recovery
can be possible. Check the BFD configuration to recover."
::= { tmnxIsisNotifications 34 }
tmnxIsisSrgbBadLabelRange NOTIFICATION-TYPE
OBJECTS {
tmnxIsisNotifAdditionalInfo,
tmnxIsisNotifSrgbRangeStartLbl,
tmnxIsisNotifSrgbRangeMaxIdx,
tmnxIsisNotifSrgbAdvRtrSysID,
tmnxIsisNotifSrgbLevel,
tmnxIsisNotifSrgbMtId
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisSrgbBadLabelRange notification is sent when ISIS
receives a bad SRGB label range from a router (for example,
overlapping with another label range).
[EFFECT] The configured Segment Routing tunnels will be wrong.
[RECOVERY] Change the label range to recover."
::= { tmnxIsisNotifications 35 }
tmnxIsisCircMtuTooLow NOTIFICATION-TYPE
OBJECTS {
vRtrIfIndex,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifCircMinReqMtuSize,
tmnxIsisNotifCircMtuSize
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisCircMtuTooLow notification is sent when we attempt
to a) configure a circuit which cannot propagate an LSP or SNP with
max size tmnxIsisLevelLSPBuffSize. b) configure
tmnxIsisLevelLSPBuffSize which is bigger than
tmnxIsisLevelMaxOperLSPBuffSize. c) configure
tmnxIsisSysOrigL1LSPBuffSize or tmnxIsisSysOrigL2LSPBuffSize which is
bigger than tmnxIsisLevelMaxOperLSPBuffSize.
[EFFECT] No effect.
[RECOVERY] Increase port-mtu or decrease lsp-mtu."
::= { tmnxIsisNotifications 36 }
tmnxIsisRejectedAdjacencySet NOTIFICATION-TYPE
OBJECTS {
tmnxIsisAdjSetNeighborSysID,
tmnxIsisNotifyIfIndex,
tmnxIsisNotifSystemLevel,
tmnxIsisNotifNbrSysId,
tmnxIsisNotifyDescription
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisRejectedAdjacencySet notification is sent when an
adjacency can not be assigned to an adjacency-set because it does not
terminate on the same neighbor node as the other adjacencies.
This notification each time the adjacency-set is programmed.
[EFFECT] Adjacency-set nhops will not include this adjacency.
[RECOVERY] Remove the interface from the adjacency-set or change the
adjacency-set type to non parallel."
::= { tmnxIsisNotifications 37 }
tmnxIsisCorruptRemainingLifetime NOTIFICATION-TYPE
OBJECTS {
tmnxIsisLSPLifetimeRemain
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisCorruptRemainingLifetime notification is sent when
an LSP is received with a possible corrupt Remaining Lifetime field.
The Remaining Lifetime of a received LSP is considered as possible
corrupt based on following algorithm:
- The LSP has passed all acceptance tests.
- The LSP is newer than the copy in the local LSPDB or no copy present.
- The Remaining Lifetime in the received LSP is less than Zero Age Lifetime.
- The adjacency to the neighbor from which the LSP is received has been up
for a minimum of Zero Age Lifetime.
[EFFECT] It is possible that an LSP is purged prematurely.
[RECOVERY] The ISIS system will try to recover by setting the
Remaining Lifetime to the tmnxIsisLspMinRemainingLifetime value."
::= { tmnxIsisNotifications 38 }
tmnxIsisSidStatsIndexAlloc NOTIFICATION-TYPE
OBJECTS {
tmnxIsisSidStatsSidType,
tmnxIsisSidStatsPrefixType,
tmnxIsisSidStatsPrefix,
tmnxIsisSidStatsPrefixLength,
tmnxIsisSidStatsIfIndex,
tmnxIsisSidStatsAdjSet,
tmnxIsisNotifStatsIndexStatus
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxIsisSidStatsIndexAlloc notification is sent when the
system is not able to allocate a statistic index to at least one SID.
This indication is sent once, i.e. if the system retries to allocate a
stat index but fails no new notification is sent. Conversely, in case
the system resolves the situation and allocates stat indices to all
needed SIDs a notification is sent to indicate that stat allocation is
in nominal state.
[EFFECT] No effect.
[RECOVERY] No recovery is necessary."
::= { tmnxIsisNotifications 39 }
END
View Git Blame Copy Permalink