2744 lines
86 KiB
Plaintext
2744 lines
86 KiB
Plaintext
WebGraph-Thermometer-NTC-US-MIB DEFINITIONS ::= BEGIN
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.34
|
|
----------------------------------------------------------------
|
|
-- 09.03.2017 New: wtWebioAn1GraphNtcAlarmSensorLostSelection
|
|
-- wtWebioAn1GraphNtcAlarmLimitWindow
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.33
|
|
----------------------------------------------------------------
|
|
-- 09.11.2016 New: wtWebioAn1GraphNtcMQTT group
|
|
-- HTTP Request, MQTT Alarm, REST
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.32
|
|
----------------------------------------------------------------
|
|
-- 15.07.2015 Changes for new Navigation (__JB__)
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.31
|
|
----------------------------------------------------------------
|
|
-- 15.07.2015 Changes for new Navigation (__JB__)
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.30
|
|
----------------------------------------------------------------
|
|
-- 06.02.2012 WebIO
|
|
-- New: wtWebioAn1GraphPtAlarmDeltaTemp
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.29
|
|
----------------------------------------------------------------
|
|
-- 22.06.2010 Output with decimal point
|
|
--
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.28
|
|
----------------------------------------------------------------
|
|
-- 09.05.2007 Webio
|
|
-- New Graphics java script base parameter
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.27
|
|
----------------------------------------------------------------
|
|
-- 09.11.2006 Webio
|
|
-- DHCP enable
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.26
|
|
----------------------------------------------------------------
|
|
-- 28.06.2006 New: Community String Trap
|
|
--
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.25
|
|
----------------------------------------------------------------
|
|
-- 22.05.2006 Table entry names changed
|
|
--
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.24
|
|
----------------------------------------------------------------
|
|
-- 26.07.2005 #57605, WebGraph Thermometer
|
|
-- CRON timer function
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.23
|
|
----------------------------------------------------------------
|
|
-- 14.07.2005 #57605, WebGraph Thermometer
|
|
-- FTP functions
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.22
|
|
----------------------------------------------------------------
|
|
-- 02.06.2005 #57605, WebGraph Thermometer
|
|
-- Trap NMS annotations
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.21
|
|
----------------------------------------------------------------
|
|
-- 19.04.2005 #57605, WebGraph Themometer
|
|
-- Mail Authentication
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.20
|
|
----------------------------------------------------------------
|
|
-- 05.11.2004 #57605, WebGraph
|
|
-- New: Syslog
|
|
--
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.19
|
|
----------------------------------------------------------------
|
|
-- 27.09.2004 #57601/3/4, Webio Digital
|
|
-- New:
|
|
-- Entry AlarmHysteresis corrected
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.18
|
|
----------------------------------------------------------------
|
|
-- 21.07.2004 #57601/3/4, Webio Anx
|
|
-- New:
|
|
-- Diagnosis
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.17
|
|
----------------------------------------------------------------
|
|
-- 28.06.2004 #57630/1/2, Webio Digital
|
|
-- Neu: Puls Mode
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.16
|
|
----------------------------------------------------------------
|
|
-- 16.04.2004 New: #57632, Webio Digital EA24x24
|
|
--
|
|
-- #57630/1, Webio Digital EA12x12
|
|
-- New:
|
|
-- wtWebioAn1GraphNtcInputCounterClear
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.15
|
|
----------------------------------------------------------------
|
|
-- 27.02.2004 #57630/1, Webio Digital EA12x12
|
|
-- New:
|
|
-- Length changed to 32 Bit:
|
|
-- wtWebioEA12x12InputValue
|
|
-- wtWebioEA12x12OutputValue
|
|
-- wtWebioEA12x12LoadControlView
|
|
-- wtWebioEA12x12LCShutDownView
|
|
-- wtWebioEA12x12SetOutput
|
|
-- wtWebioEA12x12AlarmInputTrigger
|
|
-- wtWebioEA12x12AlarmOutputTrigger
|
|
-- wtWebioEA12x12PortOutputSafetyState
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.14
|
|
----------------------------------------------------------------
|
|
-- 16.02.2004 #57630/1, Webio Digital EA12x12
|
|
-- New:
|
|
-- Text: Location, Contact
|
|
-- SNMP: ColdStart, WarmStart, ComunityString Read/RW
|
|
-- Alarm: ColdStart / WarmStart trigger
|
|
--
|
|
-- #57601, 1xWebThermometer
|
|
-- #57603, 2xWebThermometer
|
|
-- #57604, 8xWebThermometer
|
|
-- New:
|
|
-- Alarm Hysteresis
|
|
-- Alarm Clear Traps and Mails
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.13
|
|
----------------------------------------------------------------
|
|
-- 05.02.2004 #57601, 1xWebThermometer
|
|
-- #57603, 2xWebThermometer
|
|
-- #57604, 8xWebThermometer
|
|
-- New:
|
|
-- Text: Location, Contact
|
|
-- SNMP: ColdStart, WarmStart, ComunityString Read/RW
|
|
-- Alarm: ColdStart / WarmStart trigger
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.12
|
|
----------------------------------------------------------------
|
|
-- 05.11.2003 #57601, 1xWebThermometer
|
|
-- #57603, 2xWebThermometer
|
|
-- #57604, 8xWebThermometer
|
|
-- New features:
|
|
-- Mail : Option CSV attachment
|
|
-- Port : Offset calibration
|
|
-- Alarm : TCP Client mode
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.11
|
|
----------------------------------------------------------------
|
|
-- 28.10.2003 #57630/1, Webio Digital EA12x12
|
|
-- New features:
|
|
-- Alarm : TCP Client mode
|
|
-- Inputs: Puls filter
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.10
|
|
----------------------------------------------------------------
|
|
-- 22.07.2003 #57630, Webio Digital EA12x12
|
|
-- New navigation tree, new binary modes
|
|
--
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.09
|
|
----------------------------------------------------------------
|
|
-- 24.03.2003 Trap Enterprise (Type 1, 2) corrected
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.08
|
|
----------------------------------------------------------------
|
|
-- 04.03.2003 reconciled the language versions DE/US
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.07
|
|
----------------------------------------------------------------
|
|
-- 25.02.2003 Correction: wtWebioEA12x12LoadControl
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.06
|
|
----------------------------------------------------------------
|
|
-- 24.02.2003 New:
|
|
-- #57630, Webio EA12x12, LoadControl Group
|
|
-- Correction: Trap variable names
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.05
|
|
----------------------------------------------------------------
|
|
-- 21.01.2003 New:
|
|
-- #57630, Webio EA12x12
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.04
|
|
----------------------------------------------------------------
|
|
-- 02.01.2003 New:
|
|
-- #57601, 1xWebThermometer
|
|
-- #57603, 2xWebThermometer, 8 alarms
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.03
|
|
----------------------------------------------------------------
|
|
-- 21.11.2002 New:
|
|
-- #57604, 2xWebThermometer, BOOTP, StartupSite
|
|
-- #57603, 8xWebThermometer, BOOTP, StartupSite
|
|
----------------------------------------------------------------
|
|
-- Revison: 1.02
|
|
----------------------------------------------------------------
|
|
-- 26.07.2002 New:
|
|
-- #57604, 2xWebThermometer
|
|
-- #57603, 8xWebThermometer
|
|
--
|
|
|
|
|
|
IMPORTS
|
|
|
|
OBJECT-TYPE FROM RFC-1212
|
|
TRAP-TYPE FROM RFC-1215
|
|
DisplayString, PhysAddress FROM RFC1213-MIB
|
|
enterprises, TimeTicks, IpAddress, NetworkAddress FROM RFC1155-SMI;
|
|
|
|
|
|
-- IpAddress ::=
|
|
-- [APPLICATION 0]
|
|
-- IMPLICIT OCTET STRING (SIZE (4))
|
|
-- Counter ::=
|
|
-- [APPLICATION 1]
|
|
-- IMPLICIT INTEGER (0..4294967295)
|
|
-- Gauge ::=
|
|
-- [APPLICATION 2]
|
|
-- IMPLICIT INTEGER (0..4294967295)
|
|
-- TimeTicks ::=
|
|
-- [APPLICATION 3]
|
|
-- IMPLICIT INTEGER (0..4294967295)
|
|
|
|
|
|
-- DisplayString ::= OCTET STRING
|
|
-- PhysAddress ::= OCTET STRING
|
|
|
|
-- internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 }
|
|
-- privat OBJECT IDENTIFIER ::= { internet 4 }
|
|
-- enterprises OBJECT IDENTIFIER ::= { privat 1 }
|
|
|
|
|
|
|
|
-- Wiesemann & Theis Com-Server MIB
|
|
|
|
wut OBJECT IDENTIFIER ::= { enterprises 5040 }
|
|
wtComServer OBJECT IDENTIFIER ::= { wut 1 }
|
|
wtWebio OBJECT IDENTIFIER ::= { wtComServer 2 }
|
|
|
|
-- wtWebio Tree
|
|
|
|
wtWebioAn1GraphNtc OBJECT IDENTIFIER ::= { wtWebio 38 }
|
|
|
|
-- wtWebioAn1GraphNtc Tree
|
|
|
|
wtWebioAn1GraphNtcTemp OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtc 1 }
|
|
wtWebioAn1GraphNtcSessCntrl OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtc 2 }
|
|
wtWebioAn1GraphNtcConfig OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtc 3 }
|
|
|
|
-- wtWebioAn1GraphNtcConfig Tree
|
|
|
|
wtWebioAn1GraphNtcDevice OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcConfig 1 }
|
|
wtWebioAn1GraphNtcPorts OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcConfig 2 }
|
|
wtWebioAn1GraphNtcManufact OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcConfig 3 }
|
|
|
|
-- wtWebioAn1GraphNtcDevice Tree
|
|
|
|
wtWebioAn1GraphNtcText OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcDevice 1 }
|
|
wtWebioAn1GraphNtcTimeDate OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcDevice 2 }
|
|
wtWebioAn1GraphNtcBasic OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcDevice 3 }
|
|
wtWebioAn1GraphNtcDatalogger OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcDevice 4 }
|
|
wtWebioAn1GraphNtcAlarm OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcDevice 5 }
|
|
wtWebioAn1GraphNtcGraphics OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcDevice 6 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcTimeDate Tree
|
|
|
|
wtWebioAn1GraphNtcTimeZone OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcTimeDate 1 }
|
|
wtWebioAn1GraphNtcTimeServer OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcTimeDate 2 }
|
|
wtWebioAn1GraphNtcDeviceClock OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcTimeDate 3 }
|
|
|
|
-- wtWebioAn1GraphNtcBasic Tree
|
|
|
|
wtWebioAn1GraphNtcNetwork OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 1 }
|
|
wtWebioAn1GraphNtcHTTP OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 2 }
|
|
wtWebioAn1GraphNtcMail OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 3 }
|
|
wtWebioAn1GraphNtcSNMP OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 4 }
|
|
wtWebioAn1GraphNtcUDP OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 5 }
|
|
wtWebioAn1GraphNtcSyslog OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 6 }
|
|
wtWebioAn1GraphNtcFTP OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 7 }
|
|
wtWebioAn1GraphNtcMQTT OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 12 }
|
|
wtWebioAn1GraphNtcREST OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcBasic 13 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcGraphics Tree
|
|
|
|
wtWebioAn1GraphNtcGraphicsBase OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcGraphics 1 }
|
|
wtWebioAn1GraphNtcGraphicsSelect OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcGraphics 2 }
|
|
wtWebioAn1GraphNtcGraphicsScale OBJECT IDENTIFIER ::= { wtWebioAn1GraphNtcGraphics 3 }
|
|
|
|
-- wtWebioAn1GraphNtcTemp Group
|
|
------------------------
|
|
|
|
wtWebioAn1GraphNtcSensors OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of temperature sensors"
|
|
::= { wtWebioAn1GraphNtcTemp 1 }
|
|
|
|
-- Interface Table
|
|
|
|
wtWebioAn1GraphNtcSensorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcSensorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of sensors."
|
|
::= { wtWebioAn1GraphNtcTemp 2 }
|
|
|
|
wtWebioAn1GraphNtcSensorEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcSensorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperature sensor numbers."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtcSensorTable 1 }
|
|
|
|
WtWebioAn1GraphNtcSensorEntry ::= SEQUENCE {
|
|
wtWebioAn1GraphNtcSensorNo INTEGER
|
|
}
|
|
|
|
wtWebioAn1GraphNtcSensorNo OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperature sensor number."
|
|
::= { wtWebioAn1GraphNtcSensorEntry 1 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcTempValue Table
|
|
|
|
wtWebioAn1GraphNtcTempValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcTempValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of temperature values corresponding to the channel numbers."
|
|
::= { wtWebioAn1GraphNtcTemp 3 }
|
|
|
|
wtWebioAn1GraphNtcTempValueEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcTempValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperatures of the sensors."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtcTempValueTable 1 }
|
|
|
|
WtWebioAn1GraphNtcTempValueEntry ::= SEQUENCE{
|
|
wtWebioAn1GraphNtcTempValue OCTET STRING
|
|
}
|
|
|
|
wtWebioAn1GraphNtcTempValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperature value of the sensor, ASCII, 5 characters in length."
|
|
::= { wtWebioAn1GraphNtcTempValueEntry 1 }
|
|
|
|
-- wtWebioAn1GraphNtcBinaryTempValue Table
|
|
|
|
wtWebioAn1GraphNtcBinaryTempValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcBinaryTempValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of binary temperature values corresponding to the channel numbers."
|
|
::= { wtWebioAn1GraphNtcTemp 4 }
|
|
|
|
wtWebioAn1GraphNtcBinaryTempValueEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcBinaryTempValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary temperature values of the sensors."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtcBinaryTempValueTable 1 }
|
|
|
|
WtWebioAn1GraphNtcBinaryTempValueEntry ::= SEQUENCE{
|
|
wtWebioAn1GraphNtcBinaryTempValue INTEGER
|
|
}
|
|
|
|
wtWebioAn1GraphNtcBinaryTempValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary temperature value of the sensor in 1/10 degrees Celsius,
|
|
signed number, 0x7FFF indicates an
|
|
invalid measured value."
|
|
::= { wtWebioAn1GraphNtcBinaryTempValueEntry 1 }
|
|
|
|
-- wtWebioAn1GraphNtcTempValuePkt Table
|
|
|
|
wtWebioAn1GraphNtcTempValuePktTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcTempValuePktEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of temperature values corresponding to the channel numbers."
|
|
::= { wtWebioAn1GraphNtcTemp 8 }
|
|
|
|
wtWebioAn1GraphNtcTempValuePktEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcTempValuePktEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperatures of the sensors."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtcTempValuePktTable 1 }
|
|
|
|
WtWebioAn1GraphNtcTempValuePktEntry ::= SEQUENCE{
|
|
wtWebioAn1GraphNtcTempValuePkt OCTET STRING
|
|
}
|
|
|
|
wtWebioAn1GraphNtcTempValuePkt OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperature value of the sensor, ASCII, 5 characters in length, decimal point."
|
|
::= { wtWebioAn1GraphNtcTempValuePktEntry 1 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcSessCntrl Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcSessCntrlPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entering this password opens a session which is ended by writing a 1 to
|
|
wtWebioAn1GraphNtcSessCntrlLogout. When read this variable provides a string of
|
|
length zero."
|
|
::= { wtWebioAn1GraphNtcSessCntrl 1 }
|
|
|
|
wtWebioAn1GraphNtcSessCntrlConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcSessCntrl-NoSession(0),
|
|
wtWebioAn1GraphNtcSessCntrl-Session(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When the device is in SNMP configuration mode, the value 1 is
|
|
returned, otherwise 0. If the read value is 0 even though the
|
|
password was written, the device is already in config mode and the
|
|
variables can only be read."
|
|
::= { wtWebioAn1GraphNtcSessCntrl 2 }
|
|
|
|
wtWebioAn1GraphNtcSessCntrlLogout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the device is in configuration mode and the session was opened by
|
|
this SNMP Manager, writing a 1 to this variable will end the session
|
|
and all parameters are stored.
|
|
Writing a 2 discards all entries again.
|
|
When read this variable provides the value 0."
|
|
::= { wtWebioAn1GraphNtcSessCntrl 3 }
|
|
|
|
wtWebioAn1GraphNtcSessCntrlAdminPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This password protects access to the variables with administrator rights.
|
|
It can only be changed by the administrator. If no password was assigned,
|
|
the valid password is public."
|
|
::= { wtWebioAn1GraphNtcSessCntrl 4 }
|
|
|
|
wtWebioAn1GraphNtcSessCntrlConfigPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This password protects access to the variables with configurator rights. It can
|
|
be changed by the administrator and by the configurator. If no password was assigned,
|
|
the valid password is public. When read this variable provides a null-pointer."
|
|
::= { wtWebioAn1GraphNtcSessCntrl 5 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcText Group
|
|
------------------------
|
|
|
|
wtWebioAn1GraphNtcDeviceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the Webio, which is user definable."
|
|
::= { wtWebioAn1GraphNtcText 1 }
|
|
|
|
wtWebioAn1GraphNtcDeviceText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the Webio, which is user definable."
|
|
::= { wtWebioAn1GraphNtcText 2 }
|
|
|
|
wtWebioAn1GraphNtcDeviceLocation OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the location of the Webio, which is user definable."
|
|
::= { wtWebioAn1GraphNtcText 3 }
|
|
|
|
wtWebioAn1GraphNtcDeviceContact OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contact address of the system operator of the Webio, which is user definable."
|
|
::= { wtWebioAn1GraphNtcText 4 }
|
|
|
|
-- wtWebioAn1GraphNtcTimeZone Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcTzOffsetHrs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset hours for the time zone (winter time) with respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 1 }
|
|
|
|
wtWebioAn1GraphNtcTzOffsetMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset minutes for the time zone (winter time) with respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 2 }
|
|
|
|
wtWebioAn1GraphNtcTzEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Apply Timezone"
|
|
::= { wtWebioAn1GraphNtcTimeZone 3 }
|
|
|
|
wtWebioAn1GraphNtcStTzOffsetHrs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset hours of the time zone (summer time) with respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 4 }
|
|
|
|
wtWebioAn1GraphNtcStTzOffsetMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset minutes of the time zone (summer time) with respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 5 }
|
|
|
|
wtWebioAn1GraphNtcStTzEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Apply Summertime"
|
|
::= { wtWebioAn1GraphNtcTimeZone 6 }
|
|
|
|
wtWebioAn1GraphNtcStTzStartMonth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcStartMonth-January(1),
|
|
wtWebioAn1GraphNtcStartMonth-February(2),
|
|
wtWebioAn1GraphNtcStartMonth-March(3),
|
|
wtWebioAn1GraphNtcStartMonth-April(4),
|
|
wtWebioAn1GraphNtcStartMonth-May(5),
|
|
wtWebioAn1GraphNtcStartMonth-June(6),
|
|
wtWebioAn1GraphNtcStartMonth-July(7),
|
|
wtWebioAn1GraphNtcStartMonth-August(8),
|
|
wtWebioAn1GraphNtcStartMonth-September(9),
|
|
wtWebioAn1GraphNtcStartMonth-October(10),
|
|
wtWebioAn1GraphNtcStartMonth-November(11),
|
|
wtWebioAn1GraphNtcStartMonth-December(12)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Month in which the change is made from winter time to summer time."
|
|
::= { wtWebioAn1GraphNtcTimeZone 7 }
|
|
|
|
wtWebioAn1GraphNtcStTzStartMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcStartMode-first(1),
|
|
wtWebioAn1GraphNtcStartMode-second(2),
|
|
wtWebioAn1GraphNtcStartMode-third(3),
|
|
wtWebioAn1GraphNtcStartMode-fourth(4),
|
|
wtWebioAn1GraphNtcStartMode-last(5)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mode of the day of the week for which the change is made from winter time to summer time."
|
|
::= { wtWebioAn1GraphNtcTimeZone 8 }
|
|
|
|
wtWebioAn1GraphNtcStTzStartWday OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcStartWday-Sunday(1),
|
|
wtWebioAn1GraphNtcStartWday-Monday(2),
|
|
wtWebioAn1GraphNtcStartWday-Tuesday(3),
|
|
wtWebioAn1GraphNtcStartWday-Thursday(4),
|
|
wtWebioAn1GraphNtcStartWday-Wednesday(5),
|
|
wtWebioAn1GraphNtcStartWday-Friday(6),
|
|
wtWebioAn1GraphNtcStartWday-Saturday(7)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Day of the week on which the change is made from winter time to summer time"
|
|
::= { wtWebioAn1GraphNtcTimeZone 9 }
|
|
|
|
wtWebioAn1GraphNtcStTzStartHrs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hour in which the time zone is changed from winter to summer time with
|
|
respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 10 }
|
|
|
|
wtWebioAn1GraphNtcStTzStartMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minute in which the time zone is changed from winter to summer time with
|
|
respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 11 }
|
|
|
|
wtWebioAn1GraphNtcStTzStopMonth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcStopMonth-January(1),
|
|
wtWebioAn1GraphNtcStopMonth-February(2),
|
|
wtWebioAn1GraphNtcStopMonth-March(3),
|
|
wtWebioAn1GraphNtcStopMonth-April(4),
|
|
wtWebioAn1GraphNtcStopMonth-May(5),
|
|
wtWebioAn1GraphNtcStopMonth-June(6),
|
|
wtWebioAn1GraphNtcStopMonth-July(7),
|
|
wtWebioAn1GraphNtcStopMonth-August(8),
|
|
wtWebioAn1GraphNtcStopMonth-September(9),
|
|
wtWebioAn1GraphNtcStopMonth-October(10),
|
|
wtWebioAn1GraphNtcStopMonth-November(11),
|
|
wtWebioAn1GraphNtcStopMonth-December(12)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Month in which the change is made from summer time to winter time."
|
|
::= { wtWebioAn1GraphNtcTimeZone 12 }
|
|
|
|
wtWebioAn1GraphNtcStTzStopMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcStopMode-first(1),
|
|
wtWebioAn1GraphNtcStopMode-second(2),
|
|
wtWebioAn1GraphNtcStopMode-third(3),
|
|
wtWebioAn1GraphNtcStopMode-fourth(4),
|
|
wtWebioAn1GraphNtcStopMode-last(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mode of the week day on which the change is made from summer time to winter time."
|
|
::= { wtWebioAn1GraphNtcTimeZone 13 }
|
|
|
|
wtWebioAn1GraphNtcStTzStopWday OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcStopWday-Sunday(1),
|
|
wtWebioAn1GraphNtcStopWday-Monday(2),
|
|
wtWebioAn1GraphNtcStopWday-Tuesday(3),
|
|
wtWebioAn1GraphNtcStopWday-Thursday(4),
|
|
wtWebioAn1GraphNtcStopWday-Wednesday(5),
|
|
wtWebioAn1GraphNtcStopWday-Friday(6),
|
|
wtWebioAn1GraphNtcStopWday-Saturday(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Day of the week on which the change is made from summer time to winter time."
|
|
::= { wtWebioAn1GraphNtcTimeZone 14 }
|
|
|
|
wtWebioAn1GraphNtcStTzStopHrs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hour at which the time zone is changed from summer to winter time with
|
|
respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 15 }
|
|
|
|
wtWebioAn1GraphNtcStTzStopMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minute at which the time zone is changed from summer to winter time with
|
|
respect to UTC."
|
|
::= { wtWebioAn1GraphNtcTimeZone 16 }
|
|
|
|
-- wtWebioAn1GraphNtcTimeServer Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcTimeServer1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address or name of the 1st time server in ASCII"
|
|
::= { wtWebioAn1GraphNtcTimeServer 1 }
|
|
|
|
wtWebioAn1GraphNtcTimeServer2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address or name of the 2nd time server in ASCII"
|
|
::= { wtWebioAn1GraphNtcTimeServer 2 }
|
|
|
|
wtWebioAn1GraphNtcTsEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Apply Time Server"
|
|
::= { wtWebioAn1GraphNtcTimeServer 3 }
|
|
|
|
wtWebioAn1GraphNtcTsSyncTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Daily synchronisation time with the time server (hour: 0-23)."
|
|
::= { wtWebioAn1GraphNtcTimeServer 4 }
|
|
|
|
-- wtWebioAn1GraphNtcDeviceClock Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcClockHrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..23)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock hours taking into account the time zone settings."
|
|
::= { wtWebioAn1GraphNtcDeviceClock 1 }
|
|
|
|
wtWebioAn1GraphNtcClockMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..59)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock minutes taking into account the time zone settings."
|
|
::= { wtWebioAn1GraphNtcDeviceClock 2 }
|
|
|
|
wtWebioAn1GraphNtcClockDay OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Date: Day of the month, taking into account the time zone settings."
|
|
::= { wtWebioAn1GraphNtcDeviceClock 3 }
|
|
|
|
wtWebioAn1GraphNtcClockMonth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcClockMonth-January(1),
|
|
wtWebioAn1GraphNtcClockMonth-February(2),
|
|
wtWebioAn1GraphNtcClockMonth-March(3),
|
|
wtWebioAn1GraphNtcClockMonth-April(4),
|
|
wtWebioAn1GraphNtcClockMonth-May(5),
|
|
wtWebioAn1GraphNtcClockMonth-June(6),
|
|
wtWebioAn1GraphNtcClockMonth-July(7),
|
|
wtWebioAn1GraphNtcClockMonth-August(8),
|
|
wtWebioAn1GraphNtcClockMonth-September(9),
|
|
wtWebioAn1GraphNtcClockMonth-October(10),
|
|
wtWebioAn1GraphNtcClockMonth-November(11),
|
|
wtWebioAn1GraphNtcClockMonth-December(12)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Date: Month, taking into account the time zone settings."
|
|
::= { wtWebioAn1GraphNtcDeviceClock 4 }
|
|
|
|
wtWebioAn1GraphNtcClockYear OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Date: Year, taking into account the time zone settings."
|
|
::= { wtWebioAn1GraphNtcDeviceClock 5 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcNetwork Group
|
|
------------------------
|
|
|
|
wtWebioAn1GraphNtcIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address of the Webio"
|
|
::= { wtWebioAn1GraphNtcNetwork 1 }
|
|
|
|
wtWebioAn1GraphNtcSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Subnet mask of the Webio"
|
|
::= { wtWebioAn1GraphNtcNetwork 2 }
|
|
|
|
wtWebioAn1GraphNtcGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Gateway of the Webio"
|
|
::= { wtWebioAn1GraphNtcNetwork 3 }
|
|
|
|
wtWebioAn1GraphNtcDnsServer1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address of the 1st DNS server in ASCII"
|
|
::= { wtWebioAn1GraphNtcNetwork 4 }
|
|
|
|
wtWebioAn1GraphNtcDnsServer2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address of the 2nd DNS server in ASCII"
|
|
::= { wtWebioAn1GraphNtcNetwork 5 }
|
|
|
|
wtWebioAn1GraphNtcAddConfig OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Additional configuration (1=ON):
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1: DHCP disable
|
|
Bit 0: BOOTP disable
|
|
"
|
|
::= { wtWebioAn1GraphNtcNetwork 6 }
|
|
|
|
-- wtWebioAn1GraphNtcHTTP Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcStartup OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded start page:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1: Index.htm
|
|
Bit 2: Home.htm
|
|
Bit 3: User.htm
|
|
Only one page may be selected at a time."
|
|
::= { wtWebioAn1GraphNtcHTTP 1 }
|
|
|
|
wtWebioAn1GraphNtcGetHeaderEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If these bits are set, every answer of a short form GET question will be lead
|
|
by the IP-address and name of the device and/or a HTTP header:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-6: unused
|
|
Bit 1 : GET HTTP enable
|
|
Bit 0 : GET Header enable"
|
|
::= { wtWebioAn1GraphNtcHTTP 2 }
|
|
|
|
wtWebioAn1GraphNtcHttpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Definition of the standard HTML port (Default: 80)."
|
|
::= { wtWebioAn1GraphNtcHTTP 3 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcMail Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcMailAdName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Device name for mail administration."
|
|
::= { wtWebioAn1GraphNtcMail 1 }
|
|
|
|
wtWebioAn1GraphNtcMailReply OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reply address for the mail server."
|
|
::= { wtWebioAn1GraphNtcMail 2 }
|
|
|
|
wtWebioAn1GraphNtcMailServer OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP address of the mail server."
|
|
::= { wtWebioAn1GraphNtcMail 3 }
|
|
|
|
wtWebioAn1MailEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this bit to enable the sending of mails:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Mail enable"
|
|
::= { wtWebioAn1GraphNtcMail 4 }
|
|
|
|
wtWebioAn1GraphNtcMailAuthentication OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Selection of the authentication modi:
|
|
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
|
|
Bit 0 corresponds to the LSB.
|
|
OCTET 1: unused
|
|
OCTET 2: unused
|
|
OCTET 3: unused
|
|
OCTET 4: Bit 3-7: unused
|
|
Bit 2 : POP3 before SMTP
|
|
Bit 1 : ESMTP, authentication
|
|
Bit 0 : SMTP, no authentication"
|
|
::= { wtWebioAn1GraphNtcMail 5 }
|
|
|
|
wtWebioAn1GraphNtcMailAuthUser OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the user to be authenticated."
|
|
::= { wtWebioAn1GraphNtcMail 6 }
|
|
|
|
wtWebioAn1GraphNtcMailAuthPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Authentication password."
|
|
::= { wtWebioAn1GraphNtcMail 7 }
|
|
|
|
wtWebioAn1GraphNtcMailPop3Server OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or Ip-address of the POP3 Servers."
|
|
::= { wtWebioAn1GraphNtcMail 8 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcSNMP Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcSnmpCommunityStringRead OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Community string read only"
|
|
::= { wtWebioAn1GraphNtcSNMP 1 }
|
|
|
|
wtWebioAn1GraphNtcSnmpCommunityStringReadWrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Community string read / write"
|
|
::= { wtWebioAn1GraphNtcSNMP 2 }
|
|
|
|
wtWebioAn1GraphNtcSystemTrapManagerIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP address of the TCP server which accepts the system trap."
|
|
::= { wtWebioAn1GraphNtcSNMP 3 }
|
|
|
|
wtWebioAn1GraphNtcSystemTrapEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded trigger conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0: ColdStart
|
|
Bit 1: WarmStart
|
|
Bit 2-7: unused"
|
|
::= { wtWebioAn1GraphNtcSNMP 4 }
|
|
|
|
wtWebioAn1GraphNtcSnmpEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set bit 0 to enable SNMP.
|
|
If disabled, the device did not respond to any SNMP requests.
|
|
Bit 1 decided wether the community string of read operations
|
|
is compared with the system password or not:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : SNMP enable"
|
|
::= { wtWebioAn1GraphNtcSNMP 5 }
|
|
|
|
wtWebioAn1GraphNtcSnmpCommunityStringTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Community string send within traps."
|
|
::= { wtWebioAn1GraphNtcSNMP 6 }
|
|
|
|
-- wtWebioAn1GraphNtcUDP Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Udp port to which the Udp queries ( short form GET requests) can be sent. This
|
|
port number must be unique within the device."
|
|
::= { wtWebioAn1GraphNtcUDP 1 }
|
|
|
|
wtWebioAn1GraphNtcUdpEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this bit to enable UDP support:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : UDP enable"
|
|
::= { wtWebioAn1GraphNtcUDP 2 }
|
|
|
|
|
|
-- wtWebioAn1GraphNtcSyslog Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcSyslogServerIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP address of the Syslog server, which accepts the Syslog messgaes."
|
|
::= { wtWebioAn1GraphNtcSyslog 1 }
|
|
|
|
wtWebioAn1GraphNtcSyslogServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Portnumber of the Syslog servers, default 514."
|
|
::= { wtWebioAn1GraphNtcSyslog 2 }
|
|
|
|
wtWebioAn1GraphNtcSyslogSystemMessagesEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded trigger conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0: ColdStart
|
|
Bit 1: WarmStart
|
|
Bit 2: Diag Messages
|
|
Bit 3-7: unused"
|
|
::= { wtWebioAn1GraphNtcSyslog 3 }
|
|
|
|
wtWebioAn1GraphNtcSyslogEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set bit 0 to enable Syslog:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Syslog enable"
|
|
::= { wtWebioAn1GraphNtcSyslog 4 }
|
|
|
|
-- wtWebioAn1GraphNtcFTP Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcFTPServerIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP address of the FTP server, which accepts the FTP messages."
|
|
::= { wtWebioAn1GraphNtcFTP 1 }
|
|
|
|
wtWebioAn1GraphNtcFTPServerControlPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Portnumber of the control port of the FTP server, default 21."
|
|
::= { wtWebioAn1GraphNtcFTP 2 }
|
|
|
|
wtWebioAn1GraphNtcFTPUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FTP Loggin: user name."
|
|
::= { wtWebioAn1GraphNtcFTP 3 }
|
|
|
|
wtWebioAn1GraphNtcFTPPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FTP Loggin: user password."
|
|
::= { wtWebioAn1GraphNtcFTP 4 }
|
|
|
|
wtWebioAn1GraphNtcFTPAccount OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FTP Loggin: name of account."
|
|
::= { wtWebioAn1GraphNtcFTP 5 }
|
|
|
|
wtWebioAn1GraphNtcFTPOption OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit 0 switches the FTP Server in Passiv-Mode,
|
|
the Client controls the data connection on its own:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : PASV enable"
|
|
::= { wtWebioAn1GraphNtcFTP 6 }
|
|
|
|
wtWebioAn1GraphNtcFTPEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set Bit 0 to enable FTP:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : FTP enable"
|
|
::= { wtWebioAn1GraphNtcFTP 7 }
|
|
|
|
-- wtWebioAn1GraphNtcMQTT Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcMQTTEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit 7 schaltet MQTT frei:
|
|
Octet 1: ungenutzt
|
|
Octet 2: ungenutzt
|
|
Octet 3: ungenutzt
|
|
Octet 4:
|
|
Bit 0-6: ungenutzt
|
|
Bit 7 : MQTT enable"
|
|
::= { wtWebioAn1GraphNtcMQTT 1 }
|
|
|
|
wtWebioAn1GraphNtcMQTTBrockerIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP-address of the MQTT-Server."
|
|
::= { wtWebioAn1GraphNtcMQTT 2 }
|
|
|
|
wtWebioAn1GraphNtcMQTTUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MQTT login user name."
|
|
::= { wtWebioAn1GraphNtcMQTT 3 }
|
|
|
|
wtWebioAn1GraphNtcMQTTPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MQTT login password."
|
|
::= { wtWebioAn1GraphNtcMQTT 4 }
|
|
|
|
wtWebioAn1GraphNtcMQTTLocalPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Local port number."
|
|
::= { wtWebioAn1GraphNtcMQTT 5 }
|
|
|
|
wtWebioAn1GraphNtcMQTTBrokerServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MQTT Server port number."
|
|
::= { wtWebioAn1GraphNtcMQTT 6 }
|
|
|
|
wtWebioAn1GraphNtcMQTTInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ping intervall, if no data has to be send: time in seconds."
|
|
::= { wtWebioAn1GraphNtcMQTT 7 }
|
|
|
|
-- wtWebioAn1GraphNtcREST Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcRESTEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit 0 activates REST :
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : REST enable"
|
|
::= { wtWebioAn1GraphNtcREST 1 }
|
|
|
|
wtWebioAn1GraphNtcRESTDigestAuthEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit 0 activates Digest-Authentification:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Digest Auth enable"
|
|
::= { wtWebioAn1GraphNtcREST 2 }
|
|
|
|
-- wtWebioAn1GraphNtcDatalogger Group
|
|
--------------------------------
|
|
|
|
wtWebioAn1GraphNtcLoggerTimebase OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcDatalogger-1Min(1),
|
|
wtWebioAn1GraphNtcDatalogger-5Min(2),
|
|
wtWebioAn1GraphNtcDatalogger-15Min(3),
|
|
wtWebioAn1GraphNtcDatalogger-60Min(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time base of the data logger"
|
|
::= { wtWebioAn1GraphNtcDatalogger 1 }
|
|
|
|
wtWebioAn1GraphNtcLoggerSensorSel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded trigger conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0: Sensor 1
|
|
Bit 1: Sensor 2
|
|
Bit 2: Sensor 3
|
|
Bit 3: Sensor 4
|
|
Bit 4: Sensor 5
|
|
Bit 5: Sensor 6
|
|
Bit 6: Sensor 7
|
|
Bit 7: Sensor 8"
|
|
::= { wtWebioAn1GraphNtcDatalogger 2 }
|
|
|
|
wtWebioAn1GraphNtcDisplaySensorSel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded sensor selection:
|
|
only selected sensors will be shown in the graphical presentation:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0: Sensor 1
|
|
Bit 1: Sensor 2
|
|
Bit 2: Sensor 3
|
|
Bit 3: Sensor 4
|
|
Bit 4: Sensor 5
|
|
Bit 5: Sensor 6
|
|
Bit 6: Sensor 7
|
|
Bit 7: Sensor 8"
|
|
::= { wtWebioAn1GraphNtcDatalogger 3 }
|
|
|
|
-- Graph Sensor Color Table
|
|
|
|
wtWebioAn1GraphNtcSensorColorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcSensorColorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of sensor colors for the praphical presentation."
|
|
::= { wtWebioAn1GraphNtcDatalogger 4 }
|
|
|
|
wtWebioAn1GraphNtcSensorColorEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcSensorColorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index numbers of the sensors."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtcSensorColorTable 1 }
|
|
|
|
WtWebioAn1GraphNtcSensorColorEntry ::= SEQUENCE {
|
|
wtWebioAn1GraphNtcSensorColor OCTET STRING
|
|
}
|
|
|
|
wtWebioAn1GraphNtcSensorColor OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of the sensors at the praphical presention."
|
|
::= { wtWebioAn1GraphNtcSensorColorEntry 1 }
|
|
|
|
wtWebioAn1GraphNtcAutoScaleEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If bit 0 is set, vertical auto scale is enabled:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 1-7: unused
|
|
Bit 0 : Auto Scale enable"
|
|
::= { wtWebioAn1GraphNtcDatalogger 5 }
|
|
|
|
wtWebioAn1GraphNtcVerticalUpperLimit OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value defines the maximum temperature shown in the graphical presentation,
|
|
if no auto scaling is selected.
|
|
Temperature in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcDatalogger 6 }
|
|
|
|
wtWebioAn1GraphNtcVerticalLowerLimit OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value defines the minimum temperature shown in the graphical presentation,
|
|
if no auto scaling is selected.
|
|
Temperature in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcDatalogger 7 }
|
|
|
|
wtWebioAn1GraphNtcHorizontalZoom OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wtWebioAn1GraphNtcZoom-25min(1),
|
|
wtWebioAn1GraphNtcZoom-75min(2),
|
|
wtWebioAn1GraphNtcZoom-5hrs(3),
|
|
wtWebioAn1GraphNtcZoom-30hrs(4),
|
|
wtWebioAn1GraphNtcZoom-5days(5),
|
|
wtWebioAn1GraphNtcZoom-25days(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the default zoom stage, if no auto scaling is selected."
|
|
::= { wtWebioAn1GraphNtcDatalogger 8 }
|
|
|
|
-- wtWebioAn1GraphNtcAlarm Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcAlarmCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of independent alarms."
|
|
::= { wtWebioAn1GraphNtcAlarm 1 }
|
|
|
|
-- Alarm Interface Table
|
|
|
|
wtWebioAn1GraphNtcAlarmIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcAlarmIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of alarm indices."
|
|
::= { wtWebioAn1GraphNtcAlarm 2 }
|
|
|
|
wtWebioAn1GraphNtcAlarmIfEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcAlarmIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Numbers of the alarms."
|
|
INDEX { wtWebioAn1GraphNtcAlarmNo }
|
|
::= { wtWebioAn1GraphNtcAlarmIfTable 1 }
|
|
|
|
WtWebioAn1GraphNtcAlarmIfEntry ::= SEQUENCE {
|
|
wtWebioAn1GraphNtcAlarmNo INTEGER
|
|
}
|
|
|
|
wtWebioAn1GraphNtcAlarmNo OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm number."
|
|
::= { wtWebioAn1GraphNtcAlarmIfEntry 1 }
|
|
|
|
-- Alarm Table
|
|
|
|
wtWebioAn1GraphNtcAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcAlarmEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of settings depending on the alarm number."
|
|
::= { wtWebioAn1GraphNtcAlarm 3 }
|
|
|
|
wtWebioAn1GraphNtcAlarmEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcAlarmEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm parameters of the individual alarms."
|
|
INDEX { wtWebioAn1GraphNtcAlarmNo }
|
|
::= { wtWebioAn1GraphNtcAlarmTable 1 }
|
|
|
|
WtWebioAn1GraphNtcAlarmEntry ::= SEQUENCE {
|
|
wtWebioAn1GraphNtcAlarmTrigger OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMin OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMax OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmHysteresis OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmDelay OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmInterval OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmEnable OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmEMailAddr OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMailSubject OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMailText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmManagerIP OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmTrapText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMailOptions OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmTcpIpAddr OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmTcpPort INTEGER,
|
|
wtWebioAn1GraphNtcAlarmTcpText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmClearMailSubject OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmClearMailText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmClearTrapText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmClearTcpText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmSyslogIpAddr OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmSyslogPort INTEGER,
|
|
wtWebioAn1GraphNtcAlarmSyslogText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmFtpDataPort OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmFtpFileName OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmFtpText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmFtpClearText OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmFtpOption OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmTimerCron OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmDeltaTemp OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmName OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmActive OCTET STRING
|
|
wtWebioAn1GraphNtcAlarmHttpReqAuthEnable OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmHttpReqAuthUser OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmHttpReqAuthPassword OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmHttpReqSetUrl OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmHttpReqClearUrl OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmHttpReqServerPort OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMqttTopicPath OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMqttTopicSetTopic OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmMqttTopicClear OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmSensorLostSelection OCTET STRING,
|
|
wtWebioAn1GraphNtcAlarmLimitWindow INTEGER
|
|
}
|
|
|
|
wtWebioAn1GraphNtcAlarmTrigger OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded trigger conditions:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3:
|
|
Bit 0: Timer
|
|
Bit 1: ColdStart
|
|
Bit 2: WarmStart
|
|
|
|
Octet 4:
|
|
Bit 0: Sensor 1
|
|
Bit 1: Sensor 2
|
|
Bit 2: Sensor 3
|
|
Bit 3: Sensor 4
|
|
Bit 4: Sensor 5
|
|
Bit 5: Sensor 6
|
|
Bit 6: Sensor 7
|
|
Bit 7: Sensor 8"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 1 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum temperature in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 2 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum temperature in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 3 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHysteresis OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
|
|
, in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 4 }
|
|
|
|
wtWebioAn1GraphNtcAlarmDelay OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm will be delayed by setting this time while stable alarm
|
|
condition occur (time in minutes)."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 5 }
|
|
|
|
|
|
wtWebioAn1GraphNtcAlarmInterval OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Send interval for alarm messages."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 6 }
|
|
|
|
wtWebioAn1GraphNtcAlarmEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded alarm enable:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0: Mail Enable
|
|
Bit 1: SNMP Trap enable
|
|
Bit 2: TCP Client enable"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 7 }
|
|
|
|
wtWebioAn1GraphNtcAlarmEMailAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"E-Mail address for sending the alarm mail to."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 8 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMailSubject OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Subject line for alarm mail."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 9 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMailText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm mail text: <Tn> provides the current temperature; n = 1..8.
|
|
<Z> provides the current time."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 10 }
|
|
|
|
wtWebioAn1GraphNtcAlarmManagerIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP address of the SNMP Manager which accepts the trap."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 11 }
|
|
|
|
wtWebioAn1GraphNtcAlarmTrapText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This text is sent in the trap body."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 12 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMailOptions OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded options:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Attach Thermo.csv Enable
|
|
Bit 1 : CSV-Data_since_last_report
|
|
Bit 2-7: unused"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 13 }
|
|
|
|
wtWebioAn1GraphNtcAlarmTcpIpAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name or IP address of the TCP server which accepts the trap."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 14 }
|
|
|
|
wtWebioAn1GraphNtcAlarmTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port number of the TCP server which accepts the trap."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 15 }
|
|
|
|
wtWebioAn1GraphNtcAlarmTcpText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This text is sent in the TCP trap body."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 16 }
|
|
|
|
wtWebioAn1GraphNtcAlarmClearMailSubject OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Subject line for alarm clear mail."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 17 }
|
|
|
|
wtWebioAn1GraphNtcAlarmClearMailText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 18 }
|
|
|
|
wtWebioAn1GraphNtcAlarmClearTrapText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This text is sent in the trap body."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 19 }
|
|
|
|
wtWebioAn1GraphNtcAlarmClearTcpText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This text is sent in the TCP trap body."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 20 }
|
|
|
|
wtWebioAn1GraphNtcAlarmSyslogIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address of the syslog server to which the Webio device should send syslog messages."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 21 }
|
|
|
|
wtWebioAn1GraphNtcAlarmSyslogPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port number of the syslog server to which the Webio device should send syslog messages."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 22 }
|
|
|
|
wtWebioAn1GraphNtcAlarmSyslogText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
|
|
This text appears in the following syslog message body."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 23 }
|
|
|
|
wtWebioAn1GraphNtcAlarmSyslogClearText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
|
|
This text appears in the following syslog message body."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 24 }
|
|
|
|
wtWebioAn1GraphNtcAlarmFtpDataPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Local data port: 1..65535 or AUTO: the next free port will be assigned."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 25 }
|
|
|
|
wtWebioAn1GraphNtcAlarmFtpFileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the file including path informations."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 26 }
|
|
|
|
wtWebioAn1GraphNtcAlarmFtpText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Message text to store on the FTP server."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 27 }
|
|
|
|
wtWebioAn1GraphNtcAlarmFtpClearText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm clear message to store on the FTP server."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 28 }
|
|
|
|
wtWebioAn1GraphNtcAlarmFtpOption OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded options, select only one option at the same time:
|
|
STORE = replace file
|
|
APPEND = append message at the end of the file
|
|
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : STORE
|
|
Bit 1 : APPEND
|
|
Bit 2-7: unused"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 29 }
|
|
|
|
wtWebioAn1GraphNtcAlarmTimerCron OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entry contains 5 text fields space or tab seperated for time trigger definition.
|
|
Each field must match with the actual time to trigger a message, weekday and day of month
|
|
are interpreted separately.
|
|
1: Minutes Range 0-59
|
|
2. Hours Range 0-23, 0 is midnight
|
|
3: Day of month Range 1-31
|
|
4: Month Range 1-12
|
|
5: Weekday Range 0-6, 0 is sunday
|
|
|
|
Syntax for every field:
|
|
- an asterix (*) enables every possible setting of a field
|
|
- single numbers seperated by commas
|
|
- a partition within the allowed range (1-5)
|
|
- step size within an partition of the allowed range (0-59/2: every second minute)."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 30 }
|
|
|
|
wtWebioAn1GraphNtcAlarmDeltaTemp OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum rate of change degrees/min with maximum 2 decimal places.
|
|
Compared with the average of a period of 5 minutes."
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 31 }
|
|
|
|
-- __JB__
|
|
wtWebioAn1GraphNtcAlarmName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alert name"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 39 }
|
|
|
|
-- __JB__
|
|
wtWebioAn1GraphNtcAlarmActive OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alert active
|
|
1 = ON
|
|
0 = OFF"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 40 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHttpReqAuthEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded options, select only one option at the same time:
|
|
OCTET 1: unused
|
|
OCTET 2: unused
|
|
OCTET 3: unused
|
|
OCTET 4, Bit 1-7: unused
|
|
Bit 0 : HHTP Request Authentication enable"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 61 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHttpReqAuthUser OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HTTP Request: User"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 62 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHttpReqAuthPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HTTP Request: Password"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 63 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHttpReqSetUrl OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HTTP Request: Set URL"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 64 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHttpReqClearUrl OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HTTP Request: Clear URL"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 65 }
|
|
|
|
wtWebioAn1GraphNtcAlarmHttpReqServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HTTP Request: Server Port"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 66 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMqttTopicPath OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MQTT Publish: Topic path"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 67 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMqttTopicSetTopic OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MQTT Publish: Topic SET message"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 68 }
|
|
|
|
wtWebioAn1GraphNtcAlarmMqttTopicClear OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MQTT Publish: Topic CLEAR message"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 69 }
|
|
|
|
wtWebioAn1GraphNtcAlarmSensorLostSelection OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded options:
|
|
OCTET 1: unused
|
|
OCTET 2: unused
|
|
OCTET 3: unused
|
|
OCTET 4, Bit 1-7: unused
|
|
Bit 0 : Sensor 0"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 70 }
|
|
|
|
wtWebioAn1GraphNtcAlarmLimitWindow OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If window type is INSIDE the alarm is genereted when the temperature
|
|
is greater minumum value and lower than maximum value. If window type is OUTSIDE
|
|
the alarm is generated when the measured value is lower than the minimum value
|
|
or greater than the maximum value.
|
|
Binary coded options, select only one option at the same time:
|
|
OCTET 1: unused
|
|
OCTET 2: unused
|
|
OCTET 3: unused
|
|
OCTET 4, Bit 2-7: unused
|
|
Bit 1 : inside window
|
|
Bit 0 : outside window"
|
|
::= { wtWebioAn1GraphNtcAlarmEntry 71 }
|
|
|
|
-- wtWebioAn1GraphNtcGraphicsBase Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcGraphicsBaseEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the viewing options of the graphic:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Auto scroll enable
|
|
Bit 1 : Show table
|
|
Bit 2 : Show graph
|
|
Bit 3 : Show control buttons
|
|
Bit 4 : Show config menu
|
|
Bit 5 : Show Logo
|
|
Bit 6-7: unused"
|
|
::= { wtWebioAn1GraphNtcGraphicsBase 1 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsBaseWidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the width of the graphic in pixels."
|
|
::= { wtWebioAn1GraphNtcGraphicsBase 2 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsBaseHeight OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the height of the graphic in pixels."
|
|
::= { wtWebioAn1GraphNtcGraphicsBase 3 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsBaseFrameColor OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frame color definition in RGB."
|
|
::= { wtWebioAn1GraphNtcGraphicsBase 4 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsBaseBackgroundColor OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Background color definition in RGB."
|
|
::= { wtWebioAn1GraphNtcGraphicsBase 5 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsBasePollingrate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the pollingrate in seconds,
|
|
which defines the refreshing intervall of the graphic."
|
|
::= { wtWebioAn1GraphNtcGraphicsBase 6 }
|
|
|
|
-- wtWebioAn1GraphNtcGraphicsSelect Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcGraphicsSelectDisplaySensorSel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded sensor selection:
|
|
only selected sensors will be shown in the graphical presentation:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Sensor 1
|
|
Bit 1-7: unused"
|
|
::= { wtWebioAn1GraphNtcGraphicsSelect 1 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsSelectDisplayShowExtrem OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Binary coded sensor selection:
|
|
only selected sensors will be shown with minima and maxima:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Sensor 1
|
|
Bit 1-7: unused"
|
|
::= { wtWebioAn1GraphNtcGraphicsSelect 2 }
|
|
|
|
-- Graph Sensor Color Table
|
|
|
|
wtWebioAn1GraphNtc2SensorColorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtc2SensorColorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of sensor colors for the praphical presentation."
|
|
::= { wtWebioAn1GraphNtcGraphicsSelect 3 }
|
|
|
|
wtWebioAn1GraphNtc2SensorColorEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtc2SensorColorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Numbers of the sensors."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtc2SensorColorTable 1 }
|
|
|
|
WtWebioAn1GraphNtc2SensorColorEntry ::= SEQUENCE {
|
|
wtWebioAn1GraphNtcGraphicsSensorColor OCTET STRING,
|
|
wtWebioAn1GraphNtcGraphicsSelectScale OCTET STRING
|
|
}
|
|
|
|
wtWebioAn1GraphNtcGraphicsSensorColor OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of the sensors at the praphical presention."
|
|
::= { wtWebioAn1GraphNtc2SensorColorEntry 1 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsSelectScale OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Assignes one of 4 scales to a sensor:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Use Scale 1
|
|
Bit 1-7: unused"
|
|
::= { wtWebioAn1GraphNtc2SensorColorEntry 2 }
|
|
|
|
-- wtWebioAn1GraphNtcGraphicsScale Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcGraphicsScaleAutoScaleEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Select the Auto Scale Mode:
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Scale 1 Auto scale enable
|
|
Bit 1-7: unused"
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 1 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScaleAutoFitEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Select the Auto Fit Mode::
|
|
Octet 1: unused
|
|
Octet 2: unused
|
|
Octet 3: unused
|
|
Octet 4:
|
|
Bit 0 : Scale 1 Auto fit enable
|
|
Bit 1-7: unused"
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 2 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale1Min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 1: Minimum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 3 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale2Min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 2: Minimum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 4 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale3Min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 3: Minimum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 5 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale4Min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 4: Minimum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 6 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale1Max OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 1: Maximum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 7 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale2Max OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 2: Maximum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 8 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale3Max OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 3: Maximum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 9 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale4Max OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 4: Maximum."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 10 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale1Unit OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 1: Unit."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 11 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale2Unit OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 2: Unit."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 12 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale3Unit OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 3: Unit."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 13 }
|
|
|
|
wtWebioAn1GraphNtcGraphicsScale4Unit OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Scale 4: Unit."
|
|
::= { wtWebioAn1GraphNtcGraphicsScale 14 }
|
|
|
|
-- wtWebioAn1GraphNtcPorts Group
|
|
----------------------------
|
|
|
|
-- Table
|
|
|
|
wtWebioAn1GraphNtcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WtWebioAn1GraphNtcPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of settings depending on the sensor number."
|
|
::= { wtWebioAn1GraphNtcPorts 1 }
|
|
|
|
wtWebioAn1GraphNtcPortEntry OBJECT-TYPE
|
|
SYNTAX WtWebioAn1GraphNtcPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sensor parameters for the individual sensors."
|
|
INDEX { wtWebioAn1GraphNtcSensorNo }
|
|
::= { wtWebioAn1GraphNtcPortTable 1 }
|
|
|
|
WtWebioAn1GraphNtcPortEntry ::= SEQUENCE {
|
|
wtWebioAn1GraphNtcPortName OCTET STRING,
|
|
wtWebioAn1GraphNtcPortText OCTET STRING,
|
|
wtWebioAn1GraphNtcPortOffset1 OCTET STRING,
|
|
wtWebioAn1GraphNtcPortTemperature1 OCTET STRING,
|
|
wtWebioAn1GraphNtcPortOffset2 OCTET STRING,
|
|
wtWebioAn1GraphNtcPortTemperature2 OCTET STRING,
|
|
wtWebioAn1GraphNtcPortComment OCTET STRING
|
|
|
|
}
|
|
|
|
wtWebioAn1GraphNtcPortName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the sensor."
|
|
::= { wtWebioAn1GraphNtcPortEntry 1 }
|
|
|
|
wtWebioAn1GraphNtcPortText OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the sensor."
|
|
::= { wtWebioAn1GraphNtcPortEntry 2 }
|
|
|
|
wtWebioAn1GraphNtcPortOffset1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1."
|
|
::= { wtWebioAn1GraphNtcPortEntry 3 }
|
|
|
|
wtWebioAn1GraphNtcPortTemperature1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcPortEntry 4 }
|
|
|
|
wtWebioAn1GraphNtcPortOffset2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2."
|
|
::= { wtWebioAn1GraphNtcPortEntry 5 }
|
|
|
|
wtWebioAn1GraphNtcPortTemperature2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places."
|
|
::= { wtWebioAn1GraphNtcPortEntry 6 }
|
|
|
|
wtWebioAn1GraphNtcPortComment OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Offset calibration: informations of date, name of operator, reference devices."
|
|
::= { wtWebioAn1GraphNtcPortEntry 7 }
|
|
|
|
-- wtWebioAn1GraphNtcManufact Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcMfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturer company name"
|
|
::= { wtWebioAn1GraphNtcManufact 1 }
|
|
|
|
wtWebioAn1GraphNtcMfAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturer address."
|
|
::= { wtWebioAn1GraphNtcManufact 2 }
|
|
|
|
wtWebioAn1GraphNtcMfHotline OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturer hotline."
|
|
::= { wtWebioAn1GraphNtcManufact 3 }
|
|
|
|
wtWebioAn1GraphNtcMfInternet OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturer Internet address."
|
|
::= { wtWebioAn1GraphNtcManufact 4 }
|
|
|
|
wtWebioAn1GraphNtcMfDeviceTyp OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturer device name (model number)."
|
|
::= { wtWebioAn1GraphNtcManufact 5 }
|
|
|
|
wtWebioAn1GraphNtcMfOrderNo OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturer part number."
|
|
::= { wtWebioAn1GraphNtcManufact 6 }
|
|
|
|
-- wtWebioAn1GraphNtcDiag Group
|
|
----------------------------
|
|
|
|
wtWebioAn1GraphNtcDiagErrorCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of entries in the error memory."
|
|
::= { wtWebioAn1GraphNtcDiag 1 }
|
|
|
|
wtWebioAn1GraphNtcDiagBinaryError OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error causes coded bit-by-bit."
|
|
::= { wtWebioAn1GraphNtcDiag 2 }
|
|
|
|
wtWebioAn1GraphNtcDiagErrorIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of this variable is used as an index to read
|
|
an error massege from wtWebioAn1GraphNtcDiagErrorMessage.
|
|
Errors are numbered from 1 to wtWebioAn1GraphNtcDiagErrorCount.
|
|
Writing a valid value into this variable, making the appropriate
|
|
message readable from wtWebioAn1GraphNtcDiagErrorMessage."
|
|
::= { wtWebioAn1GraphNtcDiag 3 }
|
|
|
|
wtWebioAn1GraphNtcDiagErrorMessage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Using wtWebioAn1GraphNtcDiagErrorIndex as an index, the appropriate message is available."
|
|
::= { wtWebioAn1GraphNtcDiag 4 }
|
|
|
|
wtWebioAn1GraphNtcDiagErrorClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Writing 1 into this variable clears all diagnosis messages."
|
|
::= { wtWebioAn1GraphNtcDiag 5 }
|
|
|
|
-- TRAP DEFINITIONS
|
|
|
|
-- Diese SNMP-Traps werden gesendet, wenn die Alarmtriggerbedingungen zutreffen
|
|
|
|
wtWebioAn1GraphNtcAlert1 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 1 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 1"
|
|
--#SUMMARY "Alarm 1: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 31
|
|
|
|
wtWebioAn1GraphNtcAlert2 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 2 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 2"
|
|
--#SUMMARY "Alarm 2: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 32
|
|
|
|
wtWebioAn1GraphNtcAlert3 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 3 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 3"
|
|
--#SUMMARY "Alarm 3: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 33
|
|
|
|
wtWebioAn1GraphNtcAlert4 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 4 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 4"
|
|
--#SUMMARY "Alarm 4: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 34
|
|
|
|
wtWebioAn1GraphNtcAlert5 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 5 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 5"
|
|
--#SUMMARY "Alarm 5: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 35
|
|
|
|
wtWebioAn1GraphNtcAlert6 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 6 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 6"
|
|
--#SUMMARY "Alarm 6: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 36
|
|
|
|
wtWebioAn1GraphNtcAlert7 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 7 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 7"
|
|
--#SUMMARY "Alarm 7: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 37
|
|
|
|
wtWebioAn1GraphNtcAlert8 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 8 was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Alarm 8"
|
|
--#SUMMARY "Alarm 8: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 38
|
|
|
|
|
|
wtWebioAn1GraphNtcAlert9 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 1 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 1"
|
|
--#SUMMARY "Release Alarm 1: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 91
|
|
|
|
wtWebioAn1GraphNtcAlert10 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 2 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 2"
|
|
--#SUMMARY "Release Alarm 2: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 92
|
|
|
|
wtWebioAn1GraphNtcAlert11 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 3 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 3"
|
|
--#SUMMARY "Release Alarm 3: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 93
|
|
|
|
wtWebioAn1GraphNtcAlert12 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 4 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 4"
|
|
--#SUMMARY "Release Alarm 4: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 94
|
|
|
|
wtWebioAn1GraphNtcAlert13 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 5 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 5"
|
|
--#SUMMARY "Release Alarm 5: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 95
|
|
|
|
wtWebioAn1GraphNtcAlert14 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 6 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 6"
|
|
--#SUMMARY "Release Alarm 6: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 96
|
|
|
|
wtWebioAn1GraphNtcAlert15 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 7 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 7"
|
|
--#SUMMARY "Release Alarm 7: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 97
|
|
|
|
wtWebioAn1GraphNtcAlert16 TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES { wtWebioAn1GraphNtcAlarmClearTrapText }
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when Alarm 8 was cleared,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Release Alarm 8"
|
|
--#SUMMARY "Release Alarm 8: %s"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 99
|
|
--#STATE OPERATIONAL
|
|
::= 98
|
|
|
|
wtWebioAn1GraphNtcAlertDiag TRAP-TYPE
|
|
ENTERPRISE wtWebioAn1GraphNtc
|
|
VARIABLES {
|
|
wtWebioAn1GraphNtcDiagErrorIndex,
|
|
wtWebioAn1GraphNtcDiagErrorMessage
|
|
}
|
|
DESCRIPTION
|
|
"This SNMP trap is generated when a diagnosis/error message was triggered,
|
|
SNMP trap enable is set and
|
|
SNMP is enabled."
|
|
-- NMS trap annotation
|
|
--#TYPE "Web-Thermograph Diagnose Error"
|
|
--#SUMMARY "Diagnose error index: %d, Message: %s."
|
|
--#ARGUMENTS {0,1}
|
|
--#SEVERITY MAJOR
|
|
--#TIMEINDEX 99
|
|
--#STATE DEGRADED
|
|
::= 110
|
|
|
|
END
|