5105 lines
195 KiB
Plaintext
5105 lines
195 KiB
Plaintext
APPC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString, InstancePointer, TEXTUAL-CONVENTION, DateAndTime
|
|
FROM SNMPv2-TC
|
|
|
|
mib-2, Counter32, Gauge32, Integer32, TimeTicks,
|
|
OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
|
|
snanauMIB
|
|
FROM SNA-NAU-MIB
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
appcMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9512150000Z"
|
|
ORGANIZATION "IETF SNA NAU MIB Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
Michael Allen
|
|
Wall Data Inc.
|
|
P.O.Box 1120
|
|
Duval, WA 98019, USA
|
|
Tel: 1 206 844 3505
|
|
E-mail: mallen@hq.walldata.com
|
|
|
|
Bob Clouston
|
|
Cisco Systems
|
|
7025 Kit Creek Road
|
|
P.O. Box 14987
|
|
Research Triangle Park, NC 27709, USA
|
|
Tel: 1 919 472 2333
|
|
E-mail: clouston@cisco.com
|
|
|
|
Zbigniew Kielczewski
|
|
Cisco Systems
|
|
3100 Smoketree Court
|
|
Raleigh, NC 27604, USA
|
|
Tel: 1 919 871 6326
|
|
E-mail: zbig@cisco.com
|
|
|
|
William Kwan
|
|
Jupiter Technology Inc.
|
|
200 Prospect Street
|
|
Waltham, MA 02254, USA
|
|
Tel: 1 617 894 9300, x423
|
|
E-mail: billk@jti.com
|
|
|
|
Bob Moore
|
|
IBM Corporation
|
|
800 Park Offices Drive
|
|
CNMA/664
|
|
P.O. Box 12195
|
|
Research Triangle Park, NC 27709, USA
|
|
Tel: 1 919 254 4436
|
|
E-mail: remoore@ralvm6.vnet.ibm.com
|
|
"
|
|
DESCRIPTION
|
|
"This is the MIB module for objects used to manage network
|
|
devices with APPC capabilities."
|
|
::= { snanauMIB 3 }
|
|
|
|
appcObjects OBJECT IDENTIFIER ::= { appcMIB 1 }
|
|
appcGlobal OBJECT IDENTIFIER ::= { appcObjects 1 }
|
|
appcLu OBJECT IDENTIFIER ::= { appcObjects 2 }
|
|
appcTp OBJECT IDENTIFIER ::= { appcObjects 3 }
|
|
appcSession OBJECT IDENTIFIER ::= { appcObjects 4 }
|
|
appcConversation OBJECT IDENTIFIER ::= { appcObjects 5 }
|
|
appcCPIC OBJECT IDENTIFIER ::= { appcObjects 6 }
|
|
|
|
-- *********************************************************************
|
|
-- Objects in this MIB are used to model an SNA device that supports
|
|
-- APPC LUs.
|
|
-- Following is the overall organization of the MIB.
|
|
--
|
|
-- 1. APPC Global Objects - global values, defaults,
|
|
-- controls (including CNOS)
|
|
-- 2. APPC Defined Lu Tables - Admin and Oper
|
|
-- 3. APPC Defined LU Pair Tables - Admin and Oper
|
|
-- 4. APPC Mode Tables - Admin and Oper
|
|
-- 5. APPC TP Tables - Admin only
|
|
-- 6. APPC Session Tables - Active, Stats, History, RTP
|
|
-- 7. APPC Conversation Table - Active, History
|
|
-- 8. APPC CPIC side info - Admin and Oper
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
|
|
-- Textual Convention
|
|
|
|
-- ---------------------------------------------------------------------
|
|
SnaSenseData ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To facilitate their display by a Management Station, sense
|
|
data objects in the MIB are represented as DisplayStrings of
|
|
size 8. Eight '0' characters indicates that no sense data
|
|
identifying an SNA error condition is available."
|
|
SYNTAX DisplayString (SIZE (8))
|
|
-- *********************************************************************
|
|
-- APPC Control Objects
|
|
-- ---------------------------------------------------------------------
|
|
-- The following objects allow:
|
|
-- * the collection of APPC Session information counters
|
|
-- to be started and stopped
|
|
-- * the collection of APPC Session RSCVs
|
|
-- to be started and stopped
|
|
-- * the collection of APPC tracing information to be started and
|
|
-- stopped
|
|
--
|
|
-- These objects are for implementations that wish to provide
|
|
-- this level of operational control. This group is
|
|
-- conditionally mandatory in the conformance section of the MIB.
|
|
--
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
-- Control Admin
|
|
-- These objects contain the desired states for the controls.
|
|
-- The actual states are in the Oper objects.
|
|
-- *********************************************************************
|
|
appcCntrlAdminGroup OBJECT IDENTIFIER ::= { appcGlobal 1 }
|
|
|
|
appcCntrlAdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the desired state of statistics collection:
|
|
|
|
notActive collection of counters is not active.
|
|
active collection of counters is active.
|
|
|
|
When this object is set to notActive, all of the entries are
|
|
removed from the appcSessStatsTable."
|
|
::= { appcCntrlAdminGroup 1 }
|
|
|
|
appcCntrlAdminRscv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the desired state of RSCV information collection:
|
|
notActive collection of route selection control vectors
|
|
is not active.
|
|
active collection of route selection control vectors
|
|
is active."
|
|
::= { appcCntrlAdminGroup 2 }
|
|
|
|
appcCntrlAdminTrace OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the desired state of tracing:
|
|
|
|
notActive collection of tracing information is not active
|
|
active collection of tracing information is active"
|
|
::= { appcCntrlAdminGroup 3 }
|
|
|
|
appcCntrlAdminTraceParm OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the parameter to be used in conjunction with
|
|
activating tracing. The actual content is implementation
|
|
dependent."
|
|
::= { appcCntrlAdminGroup 4 }
|
|
|
|
-- *********************************************************************
|
|
|
|
-- Control Oper
|
|
-- These objects contain the actual states of the controls.
|
|
-- *********************************************************************
|
|
appcCntrlOperGroup OBJECT IDENTIFIER ::= { appcGlobal 2 }
|
|
|
|
appcCntrlOperStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current collection options in effect:
|
|
|
|
notActive collection of counters is not active.
|
|
active collection of counters is active.
|
|
|
|
Statistical entries are present in the appcSessStatsTable
|
|
only when the value of this object is 'active'."
|
|
::= { appcCntrlOperGroup 1 }
|
|
|
|
appcCntrlOperStatTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time since the appcCntrlOperStat object last changed.
|
|
This time is in hundreds of a second."
|
|
::= { appcCntrlOperGroup 2 }
|
|
|
|
appcCntrlOperRscv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current collection options in effect:
|
|
|
|
notActive collection of route selection control vectors
|
|
is not active.
|
|
active collection of route selection control vectors
|
|
is active."
|
|
::= { appcCntrlOperGroup 3 }
|
|
|
|
appcCntrlOperRscvTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time since the appcCntrlOperRscv object last changed.
|
|
This time is in hundreds of a second."
|
|
::= { appcCntrlOperGroup 4 }
|
|
|
|
appcCntrlOperTrace OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current state of tracing:
|
|
|
|
notActive collection of tracing information is not active.
|
|
active collection of tracing information is active."
|
|
::= { appcCntrlOperGroup 5 }
|
|
|
|
appcCntrlOperTraceTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time since the appcCntrlOperTrace object last changed.
|
|
This time is in hundreds of a second."
|
|
::= { appcCntrlOperGroup 6 }
|
|
|
|
appcCntrlOperTraceParm OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the parameter used in conjunction with activating
|
|
tracing. The actual content is implementation dependent."
|
|
::= { appcCntrlOperGroup 7 }
|
|
|
|
-- ******************************************************************
|
|
|
|
--
|
|
-- APPC global settings
|
|
--
|
|
-- ******************************************************************
|
|
appcGlobalObjects OBJECT IDENTIFIER ::= { appcGlobal 3 }
|
|
|
|
appcUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time, in hundredths of a second, since the
|
|
APPC portion of the system was last reinitialized."
|
|
::= { appcGlobalObjects 1 }
|
|
|
|
appcDefaultModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode name to be used under the following
|
|
conditions:
|
|
|
|
When an incoming BIND request contains a mode name not
|
|
defined at the local node. The parameters defined for
|
|
this mode are used for the inbound implicit mode
|
|
capability.
|
|
|
|
When an APPC program issues an [MC_]ALLOCATE,
|
|
[MC_]SEND_CONVERSATION, or CNOS verb, or when a CPI-C
|
|
program issues an Allocate (CMALLC) call,
|
|
specifying a mode name not defined at the local node. The
|
|
parameters defined for this mode are used for the outbound
|
|
implicit mode capability.
|
|
|
|
This mode name must match a defined entry in the
|
|
appcModeAdminTable."
|
|
::= { appcGlobalObjects 2 }
|
|
|
|
appcDefaultLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the local LU that is to serve as the
|
|
default LU. This is the default LU to which are routed inbound
|
|
|
|
BIND requests that exclude the secondary LU name. This field
|
|
is from 1 to 17 characters in length, including a period (.)
|
|
which separates the NetId from the NAU name if the NetId is
|
|
present. This local LU name must match a defined entry in the
|
|
appcLluAdminTable."
|
|
::= { appcGlobalObjects 3 }
|
|
|
|
appcDefaultImplInbndPlu OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not inbound implicit partner LU support
|
|
is enabled. The following values are defined:
|
|
|
|
no - Specifies that inbound implicit partner LU support
|
|
is disabled, which means that an incoming bind that
|
|
specifies a partner LU that is not defined at the
|
|
local node will be rejected.
|
|
|
|
yes - Specifies that inbound implicit partner LU support
|
|
is enabled, which provides the capability to accept
|
|
an incoming BIND request that contains a partner LU
|
|
name that is not defined at the local node."
|
|
::= { appcGlobalObjects 4 }
|
|
|
|
appcDefaultMaxMcLlSndSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum size of a logical record to be used for
|
|
a mapped conversation when sending data to either the inbound
|
|
or outbound implicit partner LU. This size is the maximum
|
|
number of bytes in a single logical record, as indicated in the
|
|
LL field of the record. The default value is 32767.
|
|
|
|
Note that this object does not limit the maximum size that an
|
|
application program can supply on the Send Data call for a
|
|
mapped conversation."
|
|
::= { appcGlobalObjects 5 }
|
|
|
|
appcDefaultFileSpec OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local file specification that is to be searched by the
|
|
APPC attach manager when no DEFINE_TP verb has been issued
|
|
for the TP name received on an incoming attach. In this
|
|
case, the attach manager will attempt to start a program
|
|
whose file name is the same as the incoming TP name. If
|
|
found, the program is loaded. If not found, the attach is
|
|
rejected.
|
|
|
|
The value '*' indicates that the normal search path for
|
|
executable programs is to be used for locating an undefined
|
|
transaction program.
|
|
|
|
A null string indicates that there is no default file
|
|
specification for undefined transaction programs."
|
|
::= { appcGlobalObjects 6 }
|
|
|
|
appcDefaultTpOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
queuedOperatorStarted(2),
|
|
queuedOperatorPreloaded(3),
|
|
queuedAmStarted(4),
|
|
nonqueuedAmStarted(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies how the program will be started.
|
|
|
|
other - Specifies that the default TP operation is none of
|
|
the methods specified below. It may be a
|
|
product-specific method.
|
|
|
|
queuedOperatorStarted - Specifies that one version of the
|
|
program will be run at a time. If an incoming
|
|
attach arrives and the program has not been started
|
|
yet, APPC will issue a message to the operator to
|
|
start the specified program. Subsequent attaches
|
|
that arrive while the program is active will be
|
|
queued.
|
|
|
|
queuedOperatorPreloaded - Specifies that one version
|
|
|
|
of the program will be run at a time. If an
|
|
incoming attach arrives and the program has not
|
|
been started yet, the Attach will be rejected. The
|
|
APPC attach manager determines that a TP has
|
|
started upon reception of an APPC RECEIVE_ALLOCATE
|
|
verb, or a CPI-C Accept_Conversation (CMACCP) or
|
|
Specify_Local_TP_Name (CMSLTP) call. No message is
|
|
sent to the operator. Subsequent attaches that
|
|
arrive while the program is active are queued.
|
|
|
|
queuedAmStarted - Specifies that one version of the
|
|
program will be run at a time and will be started
|
|
by the APPC attach manager. Subsequent attaches
|
|
that arrive while the program is active will be
|
|
queued.
|
|
|
|
nonqueuedAmStarted - Specifies that multiple copies of
|
|
the program will be run at a time and will be
|
|
started by the APPC attach manager. "
|
|
::= { appcGlobalObjects 7 }
|
|
|
|
appcDefaultTpConvSecRqd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not conversation security will be used
|
|
for default TPs.
|
|
|
|
no - Specifies that the incoming attach does not have to
|
|
contain security information.
|
|
yes - Specifies that the incoming attach must contain
|
|
valid authentication information (e.g., user ID and
|
|
password)."
|
|
::= { appcGlobalObjects 8 }
|
|
|
|
appcLocalCpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the local control point. This field is
|
|
from 0 to 17 characters in length, including a period (.) which
|
|
|
|
separates the NetId from the NAU name if the NetId is present.
|
|
A null string indicates that the value is unknown."
|
|
::= { appcGlobalObjects 9 }
|
|
|
|
appcActiveSessions OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the total number of active APPC sessions supported
|
|
by this implementation. Sessions for which both LUs are local
|
|
are counted twice."
|
|
::= { appcGlobalObjects 10 }
|
|
|
|
appcActiveHprSessions OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the total number of active HPR APPC sessions."
|
|
::= { appcGlobalObjects 11 }
|
|
|
|
-- ******************************************************************
|
|
-- APPC CNOS control
|
|
--
|
|
-- This group contains objects for issuing APPC Change-Number-of-Session
|
|
-- (CNOS) commands to a specific mode. Specifically, the commands
|
|
-- supported are:
|
|
-- INITIALIZE_SESSION_LIMIT
|
|
-- CHANGE_SESSION_LIMIT
|
|
-- RESET_SESSION_LIMIT
|
|
--
|
|
--
|
|
-- ******************************************************************
|
|
appcCnosControl OBJECT IDENTIFIER ::= { appcGlobal 4 }
|
|
|
|
appcCnosCommand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initSesslimit(1),
|
|
changeSesslimit(2),
|
|
resetSesslimit(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the CNOS command or verb to issue. First set the
|
|
values of the particular CNOS parameter objects (from the range
|
|
{ appcCnosControl 2 } through { appcCnosControl 8 }) that apply
|
|
to the CNOS command to be executed, set the three CNOS target
|
|
objects ({ appcCnosControl 9 } through { appcCnosControl 11 }),
|
|
then set this object to the command to be executed.
|
|
|
|
Here is the list of parameter objects that must be set for each
|
|
of the CNOS commands:
|
|
|
|
INIT_SESSION_LIMIT -
|
|
appcCnosMaxSessLimit
|
|
appcCnosMinCwinLimit
|
|
appcCnosMinClosLimit
|
|
appcCnosTargetLocLuName
|
|
appcCnosTargetParLuName
|
|
appcCnosTargetModeName
|
|
|
|
CHANGE_SESSION_LIMIT -
|
|
appcCnosMaxSessLimit
|
|
appcCnosMinCwinLimit
|
|
appcCnosMinClosLimit
|
|
appcCnosResponsible
|
|
appcCnosTargetLocLuName
|
|
appcCnosTargetParLuName
|
|
appcCnosTargetModeName
|
|
|
|
RESET_SESSION_LIMIT -
|
|
appcCnosResponsible
|
|
appcCnosDrainPart
|
|
appcCnosForce
|
|
appcCnosTargetLocLuName
|
|
appcCnosTargetParLuName
|
|
appcCnosTargetModeName
|
|
"
|
|
::= { appcCnosControl 1 }
|
|
|
|
appcCnosMaxSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum value that the local LU is to use,
|
|
during CNOS processing, for the session limit. The local LU,
|
|
as a target LU, will negotiate a higher session limit it
|
|
receives in the CNOS request down to this maximum value. The
|
|
|
|
local LU, as a source LU, will restrict the session limit it
|
|
sends in a CNOS request to a value less than or equal to this
|
|
maximum value.
|
|
|
|
If set (i.e., greater than 0), this overrides the maximum
|
|
session limit defined in the appcModeAdminTable.
|
|
|
|
This parameter should be set to the desired value before
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies to the INITIALIZE_SESSION_LIMIT and
|
|
CHANGE_SESSION_LIMIT verbs."
|
|
DEFVAL { 0 }
|
|
::= { appcCnosControl 2 }
|
|
|
|
appcCnosMinCwinLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the default minimum contention winner sessions
|
|
limit.
|
|
|
|
This parameter should be set to the desired value before
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies to the INITIALIZE_SESSION_LIMIT and
|
|
CHANGE_SESSION_LIMIT verbs."
|
|
DEFVAL { 0 }
|
|
::= { appcCnosControl 3 }
|
|
|
|
appcCnosMinClosLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the default minimum contention loser sessions limit.
|
|
|
|
This parameter should be set to the desired value before
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies to the INITIALIZE_SESSION_LIMIT and
|
|
CHANGE_SESSION_LIMIT verbs."
|
|
DEFVAL { 0 }
|
|
::= { appcCnosControl 4 }
|
|
|
|
appcCnosDrainSelf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the local LU is draining its conversations
|
|
for this mode. When a mode session limit is reset (via a CNOS
|
|
RESET_SESSION_LIMIT request), the local LU could be set to
|
|
process all queued conversations before deactivating all of the
|
|
sessions (using the SNA Bracket Initiation Stopped or BIS
|
|
protocol).
|
|
|
|
This parameter should be set to the desired value before
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies only to the RESET_SESSION_LIMIT verb."
|
|
DEFVAL { no }
|
|
::= { appcCnosControl 5 }
|
|
|
|
appcCnosDrainPart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the partner LU is draining its conversations
|
|
for this mode. When a mode session limit is reset (via a CNOS
|
|
RESET_SESSION_LIMIT request), the partner LU could be set to
|
|
process all queued conversations before deactivating all of the
|
|
sessions (using the SNA Bracket Initiation Stop or BIS
|
|
protocol).
|
|
|
|
This parameter should be set to the desired value before
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies only to the RESET_SESSION_LIMIT verb."
|
|
DEFVAL { yes }
|
|
::= { appcCnosControl 6 }
|
|
|
|
appcCnosResponsible OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source(1),
|
|
target(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which LU is responsible for selecting and
|
|
deactivating sessions as a result of a change that decreases
|
|
the session limit or the maximum number of contention winner
|
|
sessions for the source or target LU. If no session need to be
|
|
deactivated, this parameter is ignored.
|
|
|
|
source - specifies that the source (local) LU is
|
|
responsible. The target (partner) LU
|
|
cannot negotiate this value.
|
|
target - specifies that the target (partner) LU is
|
|
responsible. The target LU can negotiate
|
|
this value to source.
|
|
|
|
This parameter should be set to the desired value before
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies to the RESET_SESSION_LIMIT and
|
|
CHANGE_SESSION_LIMIT verbs."
|
|
DEFVAL { source }
|
|
::= { appcCnosControl 7 }
|
|
|
|
appcCnosForce OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the local LU should force the resetting of
|
|
the session limit when certain error conditions occur that
|
|
prevent the successful exchange of CNOS request and reply.
|
|
|
|
This parameter should be set to the desired value before
|
|
|
|
setting the command (appcCnosCommand).
|
|
|
|
This parameter applies only to the RESET_SESSION_LIMIT verb."
|
|
DEFVAL { no }
|
|
::= { appcCnosControl 8 }
|
|
|
|
appcCnosTargetLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU to which the CNOS command is
|
|
to be applied. This field is from 1 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
NetId from the NAU name if the NetId is present.
|
|
|
|
This object should be set to the desired value before setting
|
|
the command (appcCnosCommand).
|
|
|
|
This parameter applies to all CNOS verbs."
|
|
::= { appcCnosControl 9 }
|
|
|
|
appcCnosTargetParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU to which the CNOS command is
|
|
to be applied. This field is from 1 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
NetId from the NAU name if the NetId is present.
|
|
|
|
This object should be set to the desired value before setting
|
|
the command (appcCnosCommand).
|
|
|
|
This parameter applies to all CNOS verbs."
|
|
::= { appcCnosControl 10 }
|
|
|
|
appcCnosTargetModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode name to which the CNOS command is to be
|
|
|
|
applied.
|
|
|
|
This object should be set to the desired value before setting
|
|
the command (appcCnosCommand).
|
|
|
|
This parameter applies to all CNOS verbs."
|
|
::= { appcCnosControl 11 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC LU information
|
|
-- ---------------------------------------------------------------------
|
|
-- Local LU
|
|
-- Partner LU
|
|
-- Mode
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
-- APPC Local LU
|
|
--
|
|
-- The entries in the following tables provide information for
|
|
-- independent and dependent LU 6.2.
|
|
--
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
-- APPC Local LU Admin Table
|
|
-- Objects in this table contain default or expected configuration
|
|
-- values for local 6.2 LUs.
|
|
-- *********************************************************************
|
|
|
|
appcLluAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcLluAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC Local LU Admin Table."
|
|
::= { appcLu 1 }
|
|
|
|
appcLluAdminEntry OBJECT-TYPE
|
|
SYNTAX AppcLluAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about local APPC LUs. "
|
|
INDEX { appcLluAdminName }
|
|
::= { appcLluAdminTable 1 }
|
|
|
|
AppcLluAdminEntry ::= SEQUENCE {
|
|
appcLluAdminName DisplayString,
|
|
appcLluAdminDepType INTEGER,
|
|
appcLluAdminLocalAddress OCTET STRING,
|
|
appcLluAdminSessLimit Integer32,
|
|
appcLluAdminBindRspMayQ INTEGER,
|
|
appcLluAdminCompression INTEGER,
|
|
appcLluAdminInBoundCompLevel INTEGER,
|
|
appcLluAdminOutBoundCompLevel INTEGER,
|
|
appcLluAdminCompRleBeforeLZ INTEGER,
|
|
appcLluAdminAlias DisplayString
|
|
}
|
|
|
|
appcLluAdminName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the local LU. This field is from 1 to
|
|
17 characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present."
|
|
::= { appcLluAdminEntry 1 }
|
|
|
|
appcLluAdminDepType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dependent(1),
|
|
independent(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies whether the LU is dependent or
|
|
independent."
|
|
::= { appcLluAdminEntry 2 }
|
|
|
|
appcLluAdminLocalAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local address for this LU is a byte with a value ranging
|
|
from 0 to 254. For dependent LUs, this value ranges from 1 to
|
|
|
|
254; for independent LUs this value is always 0."
|
|
::= { appcLluAdminEntry 3 }
|
|
|
|
appcLluAdminSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of sessions supported by this LU."
|
|
::= { appcLluAdminEntry 4 }
|
|
|
|
appcLluAdminBindRspMayQ OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the local LU, as the sender of a BIND
|
|
request, allows a partner partner LU to delay sending the BIND
|
|
response if the partner LU cannot process the BIND request
|
|
immediately."
|
|
::= { appcLluAdminEntry 5 }
|
|
|
|
appcLluAdminCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
prohibited(1),
|
|
required(2),
|
|
negotiable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether compression is supported. The local LU uses
|
|
this value for negotiation during session activation
|
|
(SNA BIND).
|
|
|
|
prohibited - specifies that no compression is to be used.
|
|
required - specifies that compression is required.
|
|
negotiable - specifies that the usage of compression
|
|
is to be negotiated between the LUs. The
|
|
level of compression is also negotiated."
|
|
::= { appcLluAdminEntry 6 }
|
|
|
|
appcLluAdminInBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
inbound data. The local LU uses this value in conjunction with
|
|
appcLluAdminCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger number bits used for the code, the more
|
|
storage space is required for the dictionary, but
|
|
the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcLluAdminEntry 7 }
|
|
|
|
appcLluAdminOutBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
outbound data. The local LU uses this value in conjunction
|
|
with appcLluAdminCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcLluAdminEntry 8 }
|
|
|
|
appcLluAdminCompRleBeforeLZ OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether run-length encoding is to be applied to the
|
|
data before applying Lempel-Ziv-like compression. The local LU
|
|
uses this value for negotiation during session activation (SNA
|
|
BIND). This parameter is only supported if LZ compression is
|
|
used."
|
|
::= { appcLluAdminEntry 9 }
|
|
|
|
appcLluAdminAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local alias for the local LU. If not known or
|
|
not applicable, this object contains a zero-length
|
|
string."
|
|
::= { appcLluAdminEntry 10 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Local LU Oper Table
|
|
|
|
-- Objects in this table contain current operational values, such
|
|
-- as state values or negotiated parameters, for local 6.2 LUs.
|
|
-- *********************************************************************
|
|
|
|
appcLluOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcLluOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC Local LU Operational Table."
|
|
::= { appcLu 2 }
|
|
|
|
appcLluOperEntry OBJECT-TYPE
|
|
SYNTAX AppcLluOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about local APPC LUs."
|
|
INDEX { appcLluOperName }
|
|
::= { appcLluOperTable 1 }
|
|
|
|
AppcLluOperEntry ::= SEQUENCE {
|
|
appcLluOperName DisplayString,
|
|
appcLluOperDepType INTEGER,
|
|
appcLluOperLocalAddress OCTET STRING,
|
|
appcLluOperSessLimit Integer32,
|
|
appcLluOperBindRspMayQ INTEGER,
|
|
appcLluOperCompression INTEGER,
|
|
appcLluOperInBoundCompLevel INTEGER,
|
|
appcLluOperOutBoundCompLevel INTEGER,
|
|
appcLluOperCompRleBeforeLZ INTEGER,
|
|
appcLluOperAlias DisplayString,
|
|
appcLluOperActiveSessions Gauge32
|
|
}
|
|
|
|
appcLluOperName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the local LU. This field is from 1 to
|
|
17 characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present."
|
|
::= { appcLluOperEntry 1 }
|
|
|
|
appcLluOperDepType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dependent(1),
|
|
independent(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies whether the LU is dependent or
|
|
independent."
|
|
::= { appcLluOperEntry 2 }
|
|
|
|
appcLluOperLocalAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local address for this LU is a byte with a value ranging
|
|
from 0 to 254. For dependent LUs, this value ranges from 1 to
|
|
254; for independent LUs this value is always 0."
|
|
::= { appcLluOperEntry 3 }
|
|
|
|
appcLluOperSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of sessions supported by this LU."
|
|
::= { appcLluOperEntry 4 }
|
|
|
|
appcLluOperBindRspMayQ OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the local LU, as the sender of a BIND
|
|
request, allows a partner LU to delay sending the BIND
|
|
response if the partner LU cannot process the BIND request
|
|
immediately."
|
|
::= { appcLluOperEntry 5 }
|
|
|
|
appcLluOperCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
prohibited(1),
|
|
required(2),
|
|
negotiable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether compression is supported. The local LU uses
|
|
this value for negotiation during session activation (SNA
|
|
BIND).
|
|
|
|
prohibited - specifies that no compression is to be used.
|
|
required - specifies that compression is required.
|
|
negotiable - specifies that the usage of compression
|
|
is to be negotiated between the LUs. The
|
|
level of compression is also negotiated."
|
|
::= { appcLluOperEntry 6 }
|
|
|
|
appcLluOperInBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
inbound data. The local LU uses this value in conjunction with
|
|
appcLluOperCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcLluOperEntry 7 }
|
|
|
|
appcLluOperOutBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
outbound data. The local LU uses this value in conjunction
|
|
with appcLluAdminCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcLluOperEntry 8 }
|
|
|
|
appcLluOperCompRleBeforeLZ OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether run-length encoding is to be applied to the
|
|
data before applying Lempel-Ziv-like compression. The local LU
|
|
uses this value for negotiation during session activation (SNA
|
|
BIND). This parameter is only supported if LZ compression is
|
|
used."
|
|
::= { appcLluOperEntry 9 }
|
|
|
|
appcLluOperAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local alias for the local LU. If not known or
|
|
not applicable, this object contains a zero-length
|
|
string."
|
|
::= { appcLluOperEntry 10 }
|
|
|
|
appcLluOperActiveSessions OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the total number of active APPC sessions for this
|
|
LU."
|
|
::= { appcLluOperEntry 11 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC LU Pair Admin Table
|
|
-- Objects in this table contain default or expected configuration
|
|
-- values for 6.2 LU pairs. An LU pair consists of a local LU and
|
|
-- a partner LU, which may or may not be local.
|
|
-- *********************************************************************
|
|
appcLuPairAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcLuPairAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC Partner LU administrative Table"
|
|
::= { appcLu 3 }
|
|
|
|
appcLuPairAdminEntry OBJECT-TYPE
|
|
SYNTAX AppcLuPairAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC Partner LU Information Table.
|
|
It is indexed by the local and partner LU Names."
|
|
INDEX { appcLuPairAdminLocLuName,
|
|
appcLuPairAdminParLuName }
|
|
::= { appcLuPairAdminTable 1 }
|
|
|
|
AppcLuPairAdminEntry ::= SEQUENCE {
|
|
|
|
appcLuPairAdminLocLuName DisplayString,
|
|
appcLuPairAdminParLuName DisplayString,
|
|
appcLuPairAdminParLuAlias DisplayString,
|
|
appcLuPairAdminSessLimit Integer32,
|
|
appcLuPairAdminSessSec INTEGER,
|
|
appcLuPairAdminSecAccept INTEGER,
|
|
appcLuPairAdminLinkObjId InstancePointer,
|
|
appcLuPairAdminParaSessSup INTEGER
|
|
|
|
}
|
|
|
|
appcLuPairAdminLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU to which this partner LU
|
|
definition applies. This field is from 1 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
NetId from the NAU name if the NetId is present.
|
|
|
|
The reserved value '*ALL' indicates that the partner LU
|
|
definition applies to all local LUs, and not just to a single
|
|
local LU."
|
|
::= { appcLuPairAdminEntry 1 }
|
|
|
|
appcLuPairAdminParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU.
|
|
This field is from 1 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
NetId from the NAU name if the NetId is present."
|
|
::= { appcLuPairAdminEntry 2 }
|
|
|
|
appcLuPairAdminParLuAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local alias for the partner LU. If not known or
|
|
not applicable, this object contains a zero-length
|
|
string."
|
|
::= { appcLuPairAdminEntry 3 }
|
|
|
|
appcLuPairAdminSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of sessions supported by this partner LU."
|
|
::= { appcLuPairAdminEntry 4 }
|
|
|
|
appcLuPairAdminSessSec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
required(1),
|
|
accepted(2),
|
|
notAllowed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of session-level security information that
|
|
a local LU will accept on BIND requests it receives from the
|
|
partner LU.
|
|
|
|
required - Specifies that the BIND request must carry
|
|
session level verification information that
|
|
will be verified upon receipt.
|
|
accepted - Specifies that the BIND request may carry
|
|
session level verification information that
|
|
will be verified upon receipt.
|
|
notAllowed - Specifies that the BIND request must not carry
|
|
session level verification information."
|
|
::= { appcLuPairAdminEntry 5 }
|
|
|
|
appcLuPairAdminSecAccept OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
|
|
none(1),
|
|
conversation(2),
|
|
alreadyVerified(3),
|
|
persistentVerification(4),
|
|
aVandpV(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies support for different levels of access security
|
|
information in ATTACH requests received from this partner LU.
|
|
|
|
Possible values are:
|
|
|
|
none - No access security information will be
|
|
accepted on allocation requests (ATTACH) from
|
|
this LU.
|
|
conversation
|
|
- Allocation requests will not be accepted that
|
|
include already verified or persistent
|
|
verification indicators. Accept
|
|
conversation-level access security
|
|
information, which must include both a user
|
|
Id and password, and may also include a
|
|
profile.
|
|
alreadyVerified
|
|
- Allocation requests will be accepted that
|
|
include already verified indicators.
|
|
Persistent verification indicators will not
|
|
be accepted.
|
|
persistentVerification
|
|
- Allocation requests will be accepted that
|
|
include persistent verification indicators.
|
|
Already verified indicators will not be
|
|
accepted.
|
|
aVandpV - Allocation requests will be accepted that
|
|
include already verified or persistent
|
|
verification indicators."
|
|
::= { appcLuPairAdminEntry 6 }
|
|
|
|
appcLuPairAdminLinkObjId OBJECT-TYPE
|
|
SYNTAX InstancePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the link associated with this partner LU. This
|
|
value points to the row in the table containing information on
|
|
|
|
the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC
|
|
MIB module). This object may be NULL if the link is not
|
|
specified or if a link is not applicable (as for APPN-level
|
|
nodes)."
|
|
::= { appcLuPairAdminEntry 7 }
|
|
|
|
appcLuPairAdminParaSessSup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defined Parallel Sessions Supported.
|
|
|
|
Indicates whether or not multiple sessions between the partner
|
|
LU and its associated local LU are permitted. Parallel session
|
|
support also indicates that Change Number of Sessions (CNOS)
|
|
will be used to negotiate session limits between the LUs."
|
|
::= { appcLuPairAdminEntry 8 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC LU Pair Oper Table
|
|
-- Objects in this table contain current operational values, such
|
|
-- as state values or negotiated parameters, for 6.2 LU pairs.
|
|
-- *********************************************************************
|
|
|
|
appcLuPairOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcLuPairOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of active partner/local LU pairs. Two entries are
|
|
present in the table when both LUs in a pair are local."
|
|
::= { appcLu 4 }
|
|
|
|
appcLuPairOperEntry OBJECT-TYPE
|
|
SYNTAX AppcLuPairOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry representing one partner/local LU pair."
|
|
INDEX { appcLuPairOperLocLuName,
|
|
appcLuPairOperParLuName }
|
|
::= { appcLuPairOperTable 1 }
|
|
|
|
AppcLuPairOperEntry ::= SEQUENCE {
|
|
appcLuPairOperLocLuName DisplayString,
|
|
appcLuPairOperParLuName DisplayString,
|
|
appcLuPairOperParLuAlias DisplayString,
|
|
appcLuPairOperSessLimit Integer32,
|
|
appcLuPairOperSessSec INTEGER,
|
|
appcLuPairOperSecAccept INTEGER,
|
|
appcLuPairOperLinkObjId InstancePointer,
|
|
appcLuPairOperParaSessSup INTEGER,
|
|
appcLuPairOperParaSessSupLS INTEGER,
|
|
appcLuPairOperState INTEGER
|
|
}
|
|
|
|
appcLuPairOperLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present.
|
|
|
|
If this object has the same value as appcLluOperName,
|
|
then the two entries being indexed apply to the same
|
|
resource (specifically, to the same local LU)."
|
|
::= { appcLuPairOperEntry 1 }
|
|
|
|
appcLuPairOperParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU.
|
|
This field is from 1 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
NetId from the NAU name if the NetId is present."
|
|
::= { appcLuPairOperEntry 2 }
|
|
|
|
appcLuPairOperParLuAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local alias for the partner LU. If not known or
|
|
not applicable, this object contains a zero-length
|
|
string."
|
|
::= { appcLuPairOperEntry 3 }
|
|
|
|
appcLuPairOperSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of sessions supported by this partner LU."
|
|
::= { appcLuPairOperEntry 4 }
|
|
|
|
appcLuPairOperSessSec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
required(1),
|
|
accepted(2),
|
|
notAllowed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of security information that a local LU
|
|
will accept on BIND requests it receives from the partner LU.
|
|
|
|
required - Specifies that the BIND request must carry
|
|
session level verification information that
|
|
will be verified upon receipt.
|
|
accepted - Specifies that the BIND request may carry
|
|
session level verification information that
|
|
will be verified upon receipt.
|
|
notAllowed - Specifies that the BIND request must not carry
|
|
session level verification information."
|
|
::= { appcLuPairOperEntry 5 }
|
|
|
|
appcLuPairOperSecAccept OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
conversation(2),
|
|
alreadyVerified(3),
|
|
persistentVerification(4),
|
|
aVandpV(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies support for different levels of security acceptance
|
|
information in ATTACH requests received from this partner LU.
|
|
|
|
Possible values are:
|
|
|
|
none - No access security information will be
|
|
accepted on allocation requests (ATTACH) from
|
|
this LU.
|
|
conversation
|
|
- Allocation requests will not be accepted that
|
|
include already verified or persistent
|
|
verification indicators. Accept
|
|
conversation-level access security
|
|
information, which must include both a user
|
|
Id and password, and may also include a
|
|
profile.
|
|
alreadyVerified
|
|
- Allocation requests will be accepted that
|
|
include already verified indicators.
|
|
Persistent verification indicators will not
|
|
be accepted.
|
|
persistentVerification
|
|
- Allocation requests will be accepted that
|
|
include persistent verification indicators.
|
|
Already verified indicators will not be
|
|
accepted.
|
|
aVandpV - Allocation requests will be accepted that
|
|
include already verified or persistent
|
|
verification indicators."
|
|
::= { appcLuPairOperEntry 6 }
|
|
|
|
appcLuPairOperLinkObjId OBJECT-TYPE
|
|
SYNTAX InstancePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the link associated with this partner LU. This
|
|
value points to the row in the table containing information on
|
|
the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC
|
|
MIB module). This object may be NULL if the link is not
|
|
specified or if a link is not applicable (as for APPN-level
|
|
nodes)."
|
|
::= { appcLuPairOperEntry 7 }
|
|
|
|
appcLuPairOperParaSessSup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Active Parallel Sessions Supported.
|
|
|
|
Indicates whether or not multiple session between the partner
|
|
LU and its associated local LU are permitted. Parallel
|
|
session support also indicates that Change Number of Sessions
|
|
(CNOS) will be used to negotiate session limits between the
|
|
LUs."
|
|
::= { appcLuPairOperEntry 8 }
|
|
|
|
appcLuPairOperParaSessSupLS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Active Parallel Sessions Supported - last starting value.
|
|
|
|
This object represents the initial value proposed by the local
|
|
LU the last time this capability was negotiated, i.e., when
|
|
the first session was bound between the local LU and its
|
|
partner."
|
|
::= { appcLuPairOperEntry 9 }
|
|
|
|
appcLuPairOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value identifies the current operational state of this LU
|
|
pair:
|
|
|
|
inactive (1) - no active or pending session exists
|
|
between the LUs.
|
|
active (2) - an active or pending session exists
|
|
|
|
between the LUs."
|
|
::= { appcLuPairOperEntry 10 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Mode Admin Table
|
|
-- Objects in this table contain default or expected configuration
|
|
-- values for session modes.
|
|
-- Modes that have active sessions appear in the appcModeOperTable.
|
|
-- *********************************************************************
|
|
appcModeAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcModeAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC Mode Table"
|
|
::= { appcLu 5 }
|
|
|
|
appcModeAdminEntry OBJECT-TYPE
|
|
SYNTAX AppcModeAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC Mode Information Table."
|
|
INDEX { appcModeAdminLocLuName,
|
|
appcModeAdminParLuName,
|
|
appcModeAdminModeName }
|
|
::= { appcModeAdminTable 1 }
|
|
|
|
AppcModeAdminEntry ::= SEQUENCE {
|
|
appcModeAdminLocLuName DisplayString,
|
|
appcModeAdminParLuName DisplayString,
|
|
appcModeAdminModeName DisplayString,
|
|
appcModeAdminCosName DisplayString,
|
|
appcModeAdminSessEndTpName DisplayString,
|
|
appcModeAdminMaxSessLimit Integer32,
|
|
appcModeAdminMinCwinLimit Integer32,
|
|
appcModeAdminMinClosLimit Integer32,
|
|
appcModeAdminConWinAutoActLmt Integer32,
|
|
appcModeAdminRecvPacWinSz Integer32,
|
|
appcModeAdminSendPacWinSz Integer32,
|
|
appcModeAdminPrefRecvRuSz Integer32,
|
|
appcModeAdminPrefSendRuSz Integer32,
|
|
appcModeAdminRecvRuSzUpBnd Integer32,
|
|
appcModeAdminSendRuSzUpBnd Integer32,
|
|
appcModeAdminRecvRuSzLoBnd Integer32,
|
|
appcModeAdminSendRuSzLoBnd Integer32,
|
|
appcModeAdminSingSessReinit INTEGER,
|
|
appcModeAdminCompression INTEGER,
|
|
appcModeAdminInBoundCompLevel INTEGER,
|
|
appcModeAdminOutBoundCompLevel INTEGER,
|
|
appcModeAdminCompRleBeforeLZ INTEGER,
|
|
appcModeAdminSyncLvl INTEGER,
|
|
appcModeAdminCrypto INTEGER
|
|
|
|
}
|
|
|
|
appcModeAdminLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU to which this mode definition
|
|
applies. This field is from 1 to 17 characters in length,
|
|
including a period (.) which separates the NetId from the
|
|
NAU name if the NetId is present.
|
|
|
|
The reserved value '*ALL' indicates that the mode definition
|
|
applies to all local LUs for the SNA node identified by
|
|
appcLocalCpName, and not just to a single local LU."
|
|
::= { appcModeAdminEntry 1 }
|
|
|
|
appcModeAdminParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU to which this mode definition
|
|
applies. This field is from 1 to 17 characters in length,
|
|
including a period (.) which separates the NetId from the
|
|
NAU name if the NetId is present.
|
|
|
|
The reserved value '*ALL' indicates that the mode definition
|
|
applies to all partner LUs for the SNA node identified by
|
|
appcModeAdminLocLuName, and not just to a single partner LU."
|
|
::= { appcModeAdminEntry 2 }
|
|
|
|
appcModeAdminModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode name. A mode defines the characteristics
|
|
for a group of sessions. The mode name can be blank (8
|
|
space characters). "
|
|
::= { appcModeAdminEntry 3 }
|
|
|
|
appcModeAdminCosName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the class of service (COS) name associated with
|
|
this mode. If the implementation does not support COS names,
|
|
a null string is returned."
|
|
::= { appcModeAdminEntry 4 }
|
|
|
|
appcModeAdminSessEndTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the transaction program (TP) to be
|
|
invoked when a session using this mode is deactivated or ended.
|
|
If no such TP is defined, this object is a null string. When
|
|
the TP name consists entirely of displayable EBCDIC code
|
|
points, it is mapped directly to the equivalent ASCII display
|
|
string. However, registered TP names always have a non-
|
|
displayable EBCDIC code point (value less than or equal to
|
|
x'3F') as the first character, so they cannot be directly
|
|
mapped to an ASCII display string. These TP names are
|
|
converted to a display string that is equivalent to a
|
|
hexadecimal display of the EBCDIC code points. For example,
|
|
the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
|
|
ASCII display string '06F1' (including the two single quotes).
|
|
"
|
|
::= { appcModeAdminEntry 5 }
|
|
|
|
appcModeAdminMaxSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum value that the local LU is to use,
|
|
during CNOS processing, for the session limit. The local LU,
|
|
as a target LU, will negotiate a higher session limit it
|
|
|
|
receives in the CNOS request down to this maximum value. The
|
|
local LU, as a source LU, will restrict the session limit it
|
|
sends in a CNOS request to a value less than or equal to this
|
|
maximum value."
|
|
::= { appcModeAdminEntry 6 }
|
|
|
|
appcModeAdminMinCwinLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the default minimum contention winner sessions
|
|
limit. Some implementations internally issue a
|
|
INITIALIZE_SESSION_LIMIT verb when a Mode is created. This
|
|
value is the parameter used for the CNOS processing of that
|
|
verb. This parameter is not used when issuing an explicit
|
|
INITIALIZE_SESSION_LIMIT verb. The equivalent object in
|
|
appcCnosCommandTable is used."
|
|
::= { appcModeAdminEntry 7 }
|
|
|
|
appcModeAdminMinClosLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the default minimum contention loser sessions limit.
|
|
Some implementations internally issue a
|
|
INITIALIZE_SESSION_LIMIT verb when a Mode is created. This
|
|
value is the parameter used for the CNOS processing of that
|
|
verb. This is the same as target minimum contention winner
|
|
sessions. This parameter is not used when issuing an explicit
|
|
INITIALIZE_SESSION_LIMIT verb. The equivalent object in
|
|
appcCnosCommandTable is used."
|
|
::= { appcModeAdminEntry 8 }
|
|
|
|
appcModeAdminConWinAutoActLmt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the limit on the number of contention winner
|
|
sessions to be automatically activated when the minimum number
|
|
of contention winner sessions increases (as a result of CNOS
|
|
processing). The actual number of sessions activated is the
|
|
lesser of this value and the new minimum number of contention
|
|
winner sessions. "
|
|
::= { appcModeAdminEntry 9 }
|
|
|
|
appcModeAdminRecvPacWinSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the receive pacing window. This value is
|
|
used for negotiation during session activations (SNA BIND).
|
|
|
|
The meaning of this value when set to 0 depends on whether
|
|
adaptive pacing is supported:
|
|
adaptive pacing No limit on window size
|
|
fixed pacing No pacing is supported"
|
|
::= { appcModeAdminEntry 10 }
|
|
|
|
appcModeAdminSendPacWinSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the send pacing window. This value is
|
|
used for negotiation during session activations (SNA BIND).
|
|
|
|
The meaning of this value when set to 0 depends on whether
|
|
adaptive pacing is supported:
|
|
adaptive pacing No limit on window size
|
|
fixed pacing No pacing is supported"
|
|
::= { appcModeAdminEntry 11 }
|
|
|
|
appcModeAdminPrefRecvRuSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the preferred receive RU (Request Unit) size of
|
|
normal-flow requests on the sessions. This value must be less
|
|
than or equal to the value specified in
|
|
appcModeAdminRecvRuSzUpBnd and greater than or equal to the
|
|
value specified in appcModeAdminRecvRuSzLoBnd.
|
|
|
|
The local LU specifies this value for the receive maximum RU
|
|
size in session activation (SNA BIND) requests and responses.
|
|
It will allow negotiation up to the appcModeAdminRecvRuSzUpBnd
|
|
value or down to the appcModeAdminRecvRuSzLoBnd value."
|
|
::= { appcModeAdminEntry 12 }
|
|
|
|
appcModeAdminPrefSendRuSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the preferred send RU (Request Unit) size of normal-
|
|
flow requests on the sessions. This value must be less than or
|
|
equal to the value specified in appcModeAdminSendRuSzUpBnd and
|
|
greater than or equal to the value specified in
|
|
appcModeAdminSendRuSzLoBnd.
|
|
|
|
The local LU specifies this value for the send maximum RU
|
|
size in session activation (SNA BIND) requests and responses.
|
|
It will allow negotiation up to the appcModeAdminSendRuSzUpBnd
|
|
value or down to the appcModeAdminSendRuSzLoBnd value."
|
|
::= { appcModeAdminEntry 13 }
|
|
|
|
appcModeAdminRecvRuSzUpBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upper bound for the maximum receive RU
|
|
(Request Unit) size of normal-flow requests. This is used
|
|
for negotiation during session activations (SNA BIND). "
|
|
::= { appcModeAdminEntry 14 }
|
|
|
|
appcModeAdminSendRuSzUpBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upper bound for the maximum send RU (Request
|
|
Unit) size of normal-flow requests. This is used for
|
|
negotiation during session activations (SNA BIND). "
|
|
::= { appcModeAdminEntry 15 }
|
|
|
|
appcModeAdminRecvRuSzLoBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the lower bound for the maximum receive RU (Request
|
|
|
|
Unit) size of normal-flow requests. This is used for
|
|
negotiation during session activations (SNA BIND). "
|
|
::= { appcModeAdminEntry 16 }
|
|
|
|
appcModeAdminSendRuSzLoBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the lower bound for the maximum send RU (Request
|
|
Unit) size of normal-flow requests. This is used for
|
|
negotiation during session activations (SNA BIND). "
|
|
::= { appcModeAdminEntry 17 }
|
|
|
|
appcModeAdminSingSessReinit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
operatorControlled(2),
|
|
primaryOnly(3),
|
|
secondaryOnly(4),
|
|
primaryOrSecondary(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the responsibility for session reinitiation of a
|
|
single session with the partner LU (when the session goes
|
|
down). The local LU uses this parameter to specify the session
|
|
reinitiation responsibility in session activation (SNA BIND)
|
|
requests and responses.
|
|
|
|
notApplicable - specifies that this parameter has
|
|
no meaning since the value of
|
|
appcLuPairAdminParaSessSup is yes.
|
|
The field in the SNA BIND is
|
|
reserved (set to zero).
|
|
operatorControlled - specifies that neither LU will
|
|
automatically attempt to reinitiate
|
|
the session. The operator on either
|
|
side will manually reactivate the
|
|
session. A contention race (both
|
|
side reinitiating at the same time)
|
|
is won by the LU with the
|
|
lexicographically greater fully-
|
|
qualified LU name.
|
|
primaryOnly - specifies that the primary LU will
|
|
|
|
automatically attempt to reinitiate
|
|
the session.
|
|
secondaryOnly - specifies that the secondary LU will
|
|
automatically attempt to reinitiate
|
|
the session.
|
|
primaryOrSecondary - specifies that either the primary or
|
|
the secondary may automatically
|
|
attempt to reinitiate the session.
|
|
A contention race is handled the
|
|
same way as with operatorControlled.
|
|
"
|
|
::= { appcModeAdminEntry 18 }
|
|
|
|
appcModeAdminCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
prohibited(1),
|
|
required(2),
|
|
negotiable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether compression is supported. The local LU uses
|
|
this value for negotiation during session activation (SNA
|
|
BIND).
|
|
|
|
prohibited - specifies that no compression is to be used.
|
|
required - specifies that compression is required.
|
|
negotiable - specifies that the usage of compression
|
|
is to be negotiated between the LUs. The
|
|
level of compression is also negotiated."
|
|
::= { appcModeAdminEntry 19 }
|
|
|
|
appcModeAdminInBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
inbound data. The local LU uses this value in conjunction with
|
|
appcModeAdminCompression for negotiation during session
|
|
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcModeAdminEntry 20 }
|
|
|
|
appcModeAdminOutBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
outbound data. The local LU uses this value in conjunction
|
|
with appcModeAdminCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcModeAdminEntry 21 }
|
|
|
|
appcModeAdminCompRleBeforeLZ OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether run-length encoding is to be applied to the
|
|
data before applying Lempel-Ziv-like compression. The local LU
|
|
uses this value for negotiation during session activation (SNA
|
|
BIND). This parameter is only supported if LZ compression is
|
|
used."
|
|
::= { appcModeAdminEntry 22 }
|
|
|
|
appcModeAdminSyncLvl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
noneConfirm(2),
|
|
noneConfirmSyncPoint(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the sync level support. This value is used for
|
|
negotiation during session activations (SNA BIND).
|
|
|
|
none - No sync level is supported.
|
|
noneConfirm - None and Confirm levels supported.
|
|
noneConfirmSyncPoint - None, Confirm, and Sync Point is
|
|
supported.
|
|
"
|
|
::= { appcModeAdminEntry 23 }
|
|
|
|
appcModeAdminCrypto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
mandatory(2),
|
|
selective(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether session-level cryptography is supported.
|
|
This value is used for negotiation during session activations
|
|
(SNA BIND).
|
|
notSupported - Specifies session-level cryptography
|
|
is not to be used.
|
|
mandatory - Specifies session-level cryptography
|
|
must be used.
|
|
selective - Specifies session-level cryptography
|
|
is required just on selected requests
|
|
flowing on the sessions."
|
|
::= { appcModeAdminEntry 24 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Mode Oper Table
|
|
-- Objects in this table contain current operational values, such
|
|
-- as state values or negotiated parameters, for session modes.
|
|
--
|
|
-- *********************************************************************
|
|
appcModeOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcModeOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational APPC Mode Information. Two entries are present in
|
|
the table when both LUs in a pair are local."
|
|
::= { appcLu 6 }
|
|
|
|
appcModeOperEntry OBJECT-TYPE
|
|
SYNTAX AppcModeOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC mode operational information table. This entry
|
|
does not augment the appcModeAdminEntry, but reflects an actual
|
|
operational mode for a given local LU - partner LU pair."
|
|
INDEX { appcModeOperLocLuName,
|
|
appcModeOperParLuName,
|
|
appcModeOperModeName }
|
|
::= { appcModeOperTable 1 }
|
|
|
|
AppcModeOperEntry ::= SEQUENCE {
|
|
|
|
appcModeOperLocLuName DisplayString,
|
|
appcModeOperParLuName DisplayString,
|
|
appcModeOperModeName DisplayString,
|
|
appcModeOperCosName DisplayString,
|
|
appcModeOperSessEndTpName DisplayString,
|
|
appcModeOperSessLimit Integer32,
|
|
appcModeOperMaxSessLimit Integer32,
|
|
appcModeOperMinCwinLimit Integer32,
|
|
appcModeOperMinClosLimit Integer32,
|
|
appcModeOperConWinAutoActLmt Integer32,
|
|
appcModeOperRecvPacWinSz Integer32,
|
|
appcModeOperSendPacWinSz Integer32,
|
|
appcModeOperPrefRecvRuSz Integer32,
|
|
appcModeOperPrefSendRuSz Integer32,
|
|
appcModeOperRecvRuSzUpBnd Integer32,
|
|
appcModeOperSendRuSzUpBnd Integer32,
|
|
appcModeOperRecvRuSzLoBnd Integer32,
|
|
appcModeOperSendRuSzLoBnd Integer32,
|
|
appcModeOperSingSessReinit INTEGER,
|
|
appcModeOperCompression INTEGER,
|
|
appcModeOperInBoundCompLevel INTEGER,
|
|
appcModeOperOutBoundCompLevel INTEGER,
|
|
appcModeOperCompRleBeforeLZ INTEGER,
|
|
appcModeOperSyncLvl INTEGER,
|
|
appcModeOperCrypto INTEGER,
|
|
appcModeOperSyncLvlLastStart INTEGER,
|
|
appcModeOperCryptoLastStart INTEGER,
|
|
appcModeOperCNOSNeg INTEGER,
|
|
appcModeOperActCwin Gauge32,
|
|
appcModeOperActClos Gauge32,
|
|
appcModeOperPndCwin Gauge32,
|
|
appcModeOperPndClos Gauge32,
|
|
appcModeOperPtmCwin Gauge32,
|
|
appcModeOperPtmClos Gauge32,
|
|
appcModeOperDrainSelf INTEGER,
|
|
appcModeOperDrainPart INTEGER
|
|
}
|
|
|
|
appcModeOperLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present.
|
|
|
|
If this object has the same value as appcLluOperName,
|
|
then the two entries being indexed apply to the same
|
|
resource (specifically, to the same local LU)."
|
|
::= { appcModeOperEntry 1 }
|
|
|
|
appcModeOperParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present.
|
|
|
|
If this object has the same value as appcLuPairOperParLuName,
|
|
then the two entries being indexed apply to the same
|
|
resource (specifically, to the same partner LU)."
|
|
::= { appcModeOperEntry 2 }
|
|
|
|
appcModeOperModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode name. A mode defines the characteristics
|
|
for a group of sessions. The mode name can be blank (8
|
|
space characters). "
|
|
::= { appcModeOperEntry 3 }
|
|
|
|
appcModeOperCosName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the class of service (COS) name associated with
|
|
this mode. If the implementation does not support COS names,
|
|
a zero-length string is returned."
|
|
::= { appcModeOperEntry 4 }
|
|
|
|
appcModeOperSessEndTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the transaction program (TP) to be
|
|
invoked when a session using this mode is deactivated or ended.
|
|
If the name is NULL, no transaction program is invoked. When
|
|
the TP name consists entirely of displayable EBCDIC code
|
|
points, it is mapped directly to the equivalent ASCII display
|
|
string. However, registered TP names always have a non-
|
|
displayable EBCDIC code point (value less than or equal to
|
|
x'3F') as the first character, so they cannot be directly
|
|
mapped to an ASCII display string. These TP names are
|
|
converted to a display string that is equivalent to a
|
|
hexadecimal display of the EBCDIC code points. For example,
|
|
the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
|
|
ASCII display string '06F1' (including the two single quotes)."
|
|
::= { appcModeOperEntry 5 }
|
|
|
|
appcModeOperSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the current session limit of this mode as negotiated
|
|
through APPC CNOS (Change Number of Sessions) processing.
|
|
Identifies the total number of sessions that can be established
|
|
between the local and partner LU using this mode."
|
|
::= { appcModeOperEntry 6 }
|
|
|
|
appcModeOperMaxSessLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum value that the local LU is to use,
|
|
during CNOS processing, for the session limit. The local LU,
|
|
as a target LU, will negotiate a higher session limit it
|
|
receives in the CNOS request down to this maximum value. The
|
|
local LU, as a source LU, will restrict the session limit it
|
|
sends in a CNOS request to a value less than or equal to this
|
|
maximum value."
|
|
::= { appcModeOperEntry 7 }
|
|
|
|
appcModeOperMinCwinLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum contention winner sessions limit that
|
|
was negotiated via CNOS processing."
|
|
::= { appcModeOperEntry 8 }
|
|
|
|
appcModeOperMinClosLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum contention loser sessions limit that
|
|
was negotiated via CNOS processing. This is the same as
|
|
target minimum contention winner sessions."
|
|
::= { appcModeOperEntry 9 }
|
|
|
|
appcModeOperConWinAutoActLmt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the limit on the number of contention winner sessions
|
|
to be automatically activated when the minimum number of
|
|
contention winner sessions increases (as a result of CNOS
|
|
processing). The actual number of sessions activated is the
|
|
lesser of this value and the new minimum number of contention
|
|
winner sessions. "
|
|
::= { appcModeOperEntry 10 }
|
|
|
|
appcModeOperRecvPacWinSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the receive pacing window. This value is
|
|
used for negotiation during session activations (SNA BIND).
|
|
|
|
The meaning of this value when set to 0 depends on whether
|
|
adaptive pacing is supported:
|
|
adaptive pacing - No limit on window size
|
|
fixed pacing - No pacing is supported"
|
|
::= { appcModeOperEntry 11 }
|
|
|
|
appcModeOperSendPacWinSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the send pacing window. This value is
|
|
used for negotiation during session activations (SNA BIND).
|
|
|
|
The meaning of this value when set to 0 depends on whether
|
|
adaptive pacing is supported:
|
|
adaptive pacing No limit on window size
|
|
fixed pacing No pacing is supported"
|
|
::= { appcModeOperEntry 12 }
|
|
|
|
appcModeOperPrefRecvRuSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the preferred receive RU (Request Unit) size of
|
|
normal-flow requests on the sessions. This value must be less
|
|
than or equal to the value specified in
|
|
appcModeOperRecvRuSzUpBnd and greater than or equal to the
|
|
value specified in appcModeOperRecvRuSzLoBnd.
|
|
|
|
The local LU specifies this value for the receive maximum RU
|
|
size in session activation (SNA BIND) requests and responses.
|
|
It will allow negotiation up to the appcModeOperRecvRuSzUpBnd
|
|
value or down to the appcModeOperRecvRuSzLoBnd value."
|
|
::= { appcModeOperEntry 13 }
|
|
|
|
appcModeOperPrefSendRuSz OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the preferred send RU (Request Unit) size of normal-
|
|
flow requests on the sessions. This value must be less than or
|
|
equal to the value specified in appcModeOperSendRuSzUpBnd and
|
|
greater than or equal to the value specified in
|
|
appcModeOperSendRuSzLoBnd.
|
|
|
|
The local LU specifies this value for the send maximum RU
|
|
size in session activation (SNA BIND) requests and responses.
|
|
It will allow negotiation up to the appcModeOperSendRuSzUpBnd
|
|
value or down to the appcModeOperSendRuSzLoBnd value."
|
|
::= { appcModeOperEntry 14 }
|
|
|
|
appcModeOperRecvRuSzUpBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upper bound for the maximum receive RU
|
|
(Request Unit) size of normal-flow requests. This is used
|
|
for negotiation during session activations (SNA BIND). "
|
|
::= { appcModeOperEntry 15 }
|
|
|
|
appcModeOperSendRuSzUpBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upper bound for the maximum send RU (Request
|
|
Unit) size of normal-flow requests. This is used for
|
|
negotiation during session activations (SNA BIND). "
|
|
::= { appcModeOperEntry 16 }
|
|
|
|
appcModeOperRecvRuSzLoBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the lower bound for the maximum receive RU
|
|
(Request Unit) size of normal-flow requests. This is used
|
|
for negotiation during session activations (SNA BIND). "
|
|
::= { appcModeOperEntry 17 }
|
|
|
|
appcModeOperSendRuSzLoBnd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the lower bound for the maximum send RU
|
|
(Request Unit) size of normal-flow requests. This is used
|
|
for negotiation during session activations (SNA BIND). "
|
|
::= { appcModeOperEntry 18 }
|
|
|
|
appcModeOperSingSessReinit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
operatorControlled(2),
|
|
primaryOnly(3),
|
|
secondaryOnly(4),
|
|
primaryOrSecondary(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the responsibility for session reinitiation of a
|
|
single session with the partner LU (when the session goes
|
|
down). The local LU uses this parameter to specify the session
|
|
reinitiation responsibility in session activation (SNA BIND)
|
|
requests and responses.
|
|
|
|
notApplicable - specifies that this parameter has
|
|
no meaning since the value of
|
|
appcLuPairOperParaSessSup is yes.
|
|
The field in the SNA BIND is
|
|
reserved (set to zero).
|
|
operatorControlled - specifies that neither LU will
|
|
automatically attempt to reinitiate
|
|
the session. The operator on either
|
|
side will manually reactivate the
|
|
session. A contention race (both
|
|
side reinitiating at the same time)
|
|
is won by the LU with the
|
|
lexicographically greater fully-
|
|
qualified LU name.
|
|
primaryOnly - specifies that the primary LU will
|
|
automatically attempt to reinitiate
|
|
the session.
|
|
secondaryOnly - specifies that the secondary LU will
|
|
automatically attempt to reinitiate
|
|
the session.
|
|
primaryOrSecondary - specifies that either the primary or
|
|
the secondary may automatically
|
|
attempt to reinitiate the session.
|
|
A contention race is handled the
|
|
same way as with operatorControlled.
|
|
"
|
|
::= { appcModeOperEntry 19 }
|
|
|
|
appcModeOperCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
prohibited(1),
|
|
required(2),
|
|
negotiable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether compression is supported. The local LU uses
|
|
this value for negotiation during session activation (SNA
|
|
BIND).
|
|
|
|
prohibited - specifies that no compression is to be used.
|
|
required - specifies that compression is required.
|
|
negotiable - specifies that the usage of compression
|
|
is to be negotiated between the LUs. The
|
|
level of compression is also negotiated."
|
|
::= { appcModeOperEntry 20 }
|
|
|
|
appcModeOperInBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
inbound data. The local LU uses this value in conjunction with
|
|
appcModeOperCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcModeOperEntry 21 }
|
|
|
|
appcModeOperOutBoundCompLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
rle(2),
|
|
lz9(3),
|
|
lz10(4),
|
|
lz12(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum level of compression supported for
|
|
outbound data. The local LU uses this value in conjunction
|
|
with appcModeOperCompression for negotiation during session
|
|
activation (SNA BIND).
|
|
|
|
none - specifies that no compression is to be used.
|
|
rle - specifies run-length encoding compression
|
|
in which a 1 or 2 byte sequence substitution is
|
|
used for each repeated run of the same character.
|
|
lz9 - specifies Lempel-Ziv-like compression in which
|
|
9 bit codes are used to substitute repeated
|
|
substrings in the data stream. These codes are
|
|
indices that refer to entries in a common
|
|
dictionary generated adaptively at both sender and
|
|
receiver as the data flows and compression occurs.
|
|
The larger of number bits used for the code, the
|
|
more storage space is required for the dictionary,
|
|
but the larger the compression ratio.
|
|
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
|
|
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
|
|
::= { appcModeOperEntry 22 }
|
|
|
|
appcModeOperCompRleBeforeLZ OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether run-length encoding is to be applied to the
|
|
data before applying Lempel-Ziv-like compression. The local LU
|
|
uses this value for negotiation during session activation (SNA
|
|
BIND). This parameter is only supported if LZ compression is
|
|
used."
|
|
::= { appcModeOperEntry 23 }
|
|
|
|
appcModeOperSyncLvl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
noneConfirm(2),
|
|
noneConfirmSyncPoint(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the sync level support for sessions involving this
|
|
LU pair and mode name.
|
|
|
|
none - No sync level is supported.
|
|
noneConfirm - None and Confirm level supported.
|
|
noneConfirmSyncPoint - None, Confirm and Sync Point is
|
|
supported.
|
|
"
|
|
::= { appcModeOperEntry 24 }
|
|
|
|
appcModeOperCrypto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
mandatory(2),
|
|
selective(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether session-level cryptography is supported for
|
|
sessions involving this LU pair and mode name.
|
|
|
|
notSupported - Specifies session-level cryptography
|
|
is not being used.
|
|
mandatory - Specifies session-level cryptography
|
|
in being used on all requests
|
|
flowing on the sessions.
|
|
selective - Specifies session-level cryptography
|
|
is required just on selected
|
|
requests flowing on the sessions."
|
|
::= { appcModeOperEntry 25 }
|
|
|
|
appcModeOperSyncLvlLastStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
noneConfirm(2),
|
|
noneConfirmSyncPoint(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the sync level support. This value represents the
|
|
initial value proposed by the local LU the last time this
|
|
capability was negotiated, i.e., when the first session was
|
|
bound between the local LU and its partner.
|
|
|
|
none - No sync level is supported.
|
|
noneConfirm - None and Confirm level supported.
|
|
noneConfirmSyncPoint - None, Confirm and Sync Point is
|
|
supported.
|
|
"
|
|
::= { appcModeOperEntry 26 }
|
|
|
|
appcModeOperCryptoLastStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
mandatory(2),
|
|
selective(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether session-level cryptography is supported.
|
|
This value represents the initial value proposed by the local
|
|
LU the last time this capability was negotiated, i.e., when
|
|
the first session was bound between the local LU and its
|
|
partner.
|
|
notSupported - Specifies session-level cryptography
|
|
is not to be used.
|
|
mandatory - Specifies session-level cryptography
|
|
must be used.
|
|
selective - Specifies session-level cryptography
|
|
is required just on selected
|
|
requests flowing on the sessions."
|
|
::= { appcModeOperEntry 27 }
|
|
|
|
appcModeOperCNOSNeg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether CNOS negotiation is in process. CNOS
|
|
negotiation is used to set or change the various session limits
|
|
for a mode."
|
|
::= { appcModeOperEntry 28 }
|
|
|
|
appcModeOperActCwin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of active contention winner sessions."
|
|
::= { appcModeOperEntry 29 }
|
|
|
|
appcModeOperActClos OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of active contention loser sessions."
|
|
::= { appcModeOperEntry 30 }
|
|
|
|
appcModeOperPndCwin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of contention winner sessions that are
|
|
pending activation."
|
|
::= { appcModeOperEntry 31 }
|
|
|
|
appcModeOperPndClos OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of contention loser sessions that are
|
|
pending activation."
|
|
::= { appcModeOperEntry 32 }
|
|
|
|
appcModeOperPtmCwin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of contention winner sessions that are
|
|
pending termination."
|
|
::= { appcModeOperEntry 33 }
|
|
|
|
appcModeOperPtmClos OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of contention loser sessions that are
|
|
pending termination."
|
|
::= { appcModeOperEntry 34 }
|
|
|
|
appcModeOperDrainSelf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the local LU is draining its conversations
|
|
for this mode. When a mode session limit is reset (via a CNOS
|
|
RESET_SESSION_LIMIT request), the local LU could be set to
|
|
process all queued conversations before deactivating all of the
|
|
sessions (using the SNA Bracket Initiation Stopped or BIS
|
|
protocol). "
|
|
::= { appcModeOperEntry 35 }
|
|
|
|
appcModeOperDrainPart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the partner LU is draining its conversations
|
|
for this mode. When a mode session limit is reset (via a CNOS
|
|
RESET_SESSION_LIMIT request), the partner LU could be set to
|
|
process all queued conversations before deactivating all of the
|
|
|
|
sessions (using the SNA Bracket Initiation Stop or BIS
|
|
protocol). "
|
|
::= { appcModeOperEntry 36 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC TP Admin Table
|
|
-- Objects in this table contain default or expected configuration
|
|
-- values for remotely attachable transaction programs.
|
|
-- *********************************************************************
|
|
appcTpAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcTpAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC Local TP Table"
|
|
::= { appcTp 1 }
|
|
|
|
appcTpAdminEntry OBJECT-TYPE
|
|
SYNTAX AppcTpAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC Local TP Information Table."
|
|
INDEX { appcTpAdminLocLuName,
|
|
appcTpAdminTpName }
|
|
::= { appcTpAdminTable 1 }
|
|
|
|
AppcTpAdminEntry ::= SEQUENCE {
|
|
appcTpAdminLocLuName DisplayString,
|
|
appcTpAdminTpName DisplayString,
|
|
appcTpAdminFileSpec DisplayString,
|
|
appcTpAdminStartParm DisplayString,
|
|
appcTpAdminTpOperation INTEGER,
|
|
appcTpAdminInAttachTimeout Integer32,
|
|
appcTpAdminRcvAllocTimeout Integer32,
|
|
appcTpAdminSyncLvl INTEGER,
|
|
appcTpAdminInstLmt Integer32,
|
|
appcTpAdminStatus INTEGER,
|
|
appcTpAdminLongRun INTEGER,
|
|
appcTpAdminConvType INTEGER,
|
|
appcTpAdminConvDuplex INTEGER,
|
|
appcTpAdminConvSecReq INTEGER,
|
|
appcTpAdminVerPip INTEGER,
|
|
appcTpAdminPipSubNum Integer32
|
|
|
|
}
|
|
|
|
appcTpAdminLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU to which this TP definition
|
|
applies. This field is from 1 to 17 characters in length,
|
|
including a period (.) which separates the NetId from the NAU
|
|
name if the NetId is present.
|
|
|
|
The reserved value '*ALL' indicates that the TP definition
|
|
applies to all local LUs, and not just to a single local LU."
|
|
::= { appcTpAdminEntry 1 }
|
|
|
|
appcTpAdminTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local transaction program name. This name is sent on an
|
|
ATTACH remote allocation request.
|
|
|
|
When the TP name consists entirely of displayable EBCDIC
|
|
code points, it is mapped directly to the equivalent ASCII
|
|
display string. However, registered TP names always have a
|
|
non-displayable EBCDIC code point (value less than or equal to
|
|
x'3F') as the first character, so they cannot be directly
|
|
mapped to an ASCII display string. These TP names are
|
|
converted to a display string that is equivalent to a
|
|
hexadecimal display of the EBCDIC code points. For example,
|
|
the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
|
|
ASCII display string '06F1' (including the two single quotes)."
|
|
::= { appcTpAdminEntry 2 }
|
|
|
|
appcTpAdminFileSpec OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local file specification of the transaction program.
|
|
May be a zero-length string if not applicable."
|
|
::= { appcTpAdminEntry 3 }
|
|
|
|
appcTpAdminStartParm OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A parameter string passed to the transaction program when it
|
|
is started. May be a zero-length string if not supported. "
|
|
::= { appcTpAdminEntry 4 }
|
|
|
|
appcTpAdminTpOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
queuedOperatorStarted(2),
|
|
queuedOperatorPreloaded(3),
|
|
queuedAmStarted(4),
|
|
nonqueuedAmStarted(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies how the program will be started.
|
|
other - Specifies that the program operation is none of
|
|
the methods specified. It may be a
|
|
product-specific method.
|
|
|
|
queuedOperatorStarted - Specifies that one version of the
|
|
program will be run at a time. If an incoming
|
|
attach arrives and the program has not been started
|
|
yet, APPC will issue a message to the operator to
|
|
start the specified program. Subsequent attaches
|
|
that arrive while the program is active will be
|
|
queued.
|
|
|
|
queuedOperatorPreloaded - Specifies that one version of the
|
|
program will be run at a time. If an incoming
|
|
attach arrives and the program has not been started
|
|
yet, the Attach will be rejected. The APPC attach
|
|
manager determines that a TP has started upon
|
|
reception of an APPC RECEIVE_ALLOCATE verb, or a
|
|
CPI-C Accept_Conversation (CMACCP) or
|
|
Specify_Local_TP_Name (CMSLTP) call. No message is
|
|
sent to the operator. Subsequent attaches that
|
|
arrive while the program is active are queued.
|
|
|
|
queuedAmStarted - Specifies that one version of the
|
|
program will be run at a time and will be started
|
|
by the APPC attach manager. Subsequent attaches
|
|
|
|
that arrive while the program is active will be
|
|
queued.
|
|
|
|
nonqueuedAmStarted - Specifies that multiple copies of the
|
|
program will be run at a time and will be started
|
|
by the APPC attach manager."
|
|
::= { appcTpAdminEntry 5 }
|
|
|
|
appcTpAdminInAttachTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of seconds incoming attaches
|
|
will be queued waiting for an APPC program to issue a
|
|
RECEIVE_ALLOCATE verb or for a CPI-C program to issue an
|
|
Accept_Conversation (CMACCP) call. This parameter is
|
|
meaningful only when appcTpAdminTpOperation has one of the
|
|
following values:
|
|
queuedOperatorStarted
|
|
queuedOperatorPreloaded
|
|
queuedAmStarted
|
|
|
|
A value of zero indicates that there is no timeout."
|
|
::= { appcTpAdminEntry 6 }
|
|
|
|
appcTpAdminRcvAllocTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of seconds an APPC program's
|
|
RECEIVE_ALLOCATE verb or a CPI-C program's Accept_Conversation
|
|
(CMACCP) call will wait for an incoming attach to arrive.
|
|
|
|
A value of zero indicates that there is no timeout."
|
|
::= { appcTpAdminEntry 7 }
|
|
|
|
appcTpAdminSyncLvl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
confirm(2),
|
|
noneAndConfirm(3),
|
|
syncpoint(4),
|
|
noneAndSyncpoint(5),
|
|
confirmAndSyncpoint(6),
|
|
all(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the synchronization level or levels that the
|
|
transaction program supports. The levels are defined as
|
|
follows:
|
|
|
|
none - allocation requests indicating a
|
|
synchronization level of none are allowed to
|
|
start the program.
|
|
confirm - allocation requests indicating a
|
|
synchronization level of confirm are allowed
|
|
to start the program.
|
|
syncpoint - allocation requests indicating a
|
|
synchronization level of sync point are
|
|
allowed to start the program."
|
|
::= { appcTpAdminEntry 8 }
|
|
|
|
appcTpAdminInstLmt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent instances of this transaction
|
|
program that will be supported for a local LU. A value of
|
|
zero indicates that there is no limit."
|
|
::= { appcTpAdminEntry 9 }
|
|
|
|
appcTpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
tempDisabled(2),
|
|
permDisabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of the TP relative to starting execution
|
|
when the local LU receives an allocation (ATTACH) request
|
|
naming this program.
|
|
|
|
enabled - the local LU can start the program.
|
|
tempDisabled - the local LU cannot start the
|
|
|
|
program. The local LU rejects the
|
|
request with an indication that the
|
|
TP is not available but retry is
|
|
possible.
|
|
permDisabled - the local LU cannot start the
|
|
program. The local LU rejects the
|
|
request with an indication that the
|
|
TP is not available and retry is
|
|
not possible."
|
|
::= { appcTpAdminEntry 10 }
|
|
|
|
appcTpAdminLongRun OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether this is a long-running transaction program
|
|
(i.e., one that stays around even after the conversation goes
|
|
away)."
|
|
::= { appcTpAdminEntry 11 }
|
|
|
|
appcTpAdminConvType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
basic(1),
|
|
mapped(2),
|
|
basicOrMapped(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the conversation type (basic or mapped) that will be
|
|
used by the TP. This value is verified upon receipt of an
|
|
incoming attach. The acceptable values are:
|
|
|
|
basic - Indicates that this transaction program
|
|
supports basic conversations.
|
|
|
|
mapped - Indicates that this transaction program
|
|
supports mapped conversations.
|
|
|
|
basicOrMapped - Indicates that this transaction program
|
|
supports both basic and mapped
|
|
conversations."
|
|
::= { appcTpAdminEntry 12 }
|
|
|
|
appcTpAdminConvDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
half(1),
|
|
full(2),
|
|
halfOrFull(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the conversation duplex type (half or full) that
|
|
will be used by the TP. This value is verified upon receipt of
|
|
an incoming attach. The acceptable values are:
|
|
|
|
half - Indicates that this transaction program
|
|
supports half duplex conversations.
|
|
|
|
full - Indicates that this transaction program
|
|
supports full duplex conversations.
|
|
|
|
halfOrFull - Indicates that this transaction program
|
|
supports either half or full duplex
|
|
conversations."
|
|
::= { appcTpAdminEntry 13 }
|
|
|
|
appcTpAdminConvSecReq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether conversation-level security information is
|
|
required on incoming attaches designating this TP name.
|
|
Conversation-level security verification is always performed on
|
|
those requests that include security information.
|
|
|
|
yes - Indicates that conversation-level security
|
|
information is required. ATTACHs designating the
|
|
transaction program must carry a user_id and
|
|
either a password or an already verified
|
|
indicator.
|
|
|
|
no - Indicates that no security information is
|
|
required. ATTACHs designating the transaction
|
|
|
|
program can omit or include security information."
|
|
::= { appcTpAdminEntry 14 }
|
|
|
|
appcTpAdminVerPip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the number of PIP (Program Initialization
|
|
Parameters) subfields should be verified against the number
|
|
expected (appcTpAdminPipSubNum)."
|
|
::= { appcTpAdminEntry 15 }
|
|
|
|
appcTpAdminPipSubNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of PIP subfields expected by the TP."
|
|
::= { appcTpAdminEntry 16 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Active Session Table
|
|
-- ---------------------------------------------------------------------
|
|
-- This table contains information about active APPC sessions.
|
|
-- *********************************************************************
|
|
appcActSessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcActSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of active APPC sessions. Two entries are present in the
|
|
table when both session partners are local."
|
|
::= { appcSession 1 }
|
|
|
|
appcActSessEntry OBJECT-TYPE
|
|
SYNTAX AppcActSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC Session Information Table. Indexed by LU pair
|
|
and integer-valued session index."
|
|
INDEX { appcActSessLocLuName,
|
|
appcActSessParLuName,
|
|
appcActSessIndex }
|
|
::= { appcActSessTable 1 }
|
|
|
|
AppcActSessEntry ::= SEQUENCE {
|
|
appcActSessLocLuName DisplayString,
|
|
appcActSessParLuName DisplayString,
|
|
appcActSessIndex Integer32,
|
|
appcActSessPcidCpName DisplayString,
|
|
appcActSessPcid OCTET STRING,
|
|
appcActSessPluIndicator INTEGER,
|
|
appcActSessModeName DisplayString,
|
|
appcActSessCosName DisplayString,
|
|
appcActSessTransPriority INTEGER,
|
|
appcActSessEnhanceSecSup INTEGER,
|
|
appcActSessSendPacingType INTEGER,
|
|
appcActSessSendRpc Gauge32,
|
|
appcActSessSendNxWndwSize Gauge32,
|
|
appcActSessRecvPacingType INTEGER,
|
|
appcActSessRecvRpc Gauge32,
|
|
appcActSessRecvNxWndwSize Gauge32,
|
|
appcActSessRscv OCTET STRING,
|
|
appcActSessInUse INTEGER,
|
|
appcActSessMaxSndRuSize INTEGER,
|
|
appcActSessMaxRcvRuSize INTEGER,
|
|
appcActSessSndPacingSize INTEGER,
|
|
appcActSessRcvPacingSize INTEGER,
|
|
appcActSessOperState INTEGER,
|
|
appcActSessUpTime TimeTicks,
|
|
appcActSessRtpNceId OCTET STRING,
|
|
appcActSessRtpTcid OCTET STRING,
|
|
appcActSessLinkIndex InstancePointer
|
|
}
|
|
|
|
appcActSessLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the local LU for the session. This
|
|
field is from 1 to 17 characters in length, including a period
|
|
(.) which separates the NetId from the NAU name if the NetId is
|
|
|
|
present.
|
|
|
|
If this object has the same value as appcLluOperName, then the
|
|
two entries being indexed apply to the same resource
|
|
(specifically, to the same local LU)."
|
|
::= { appcActSessEntry 1 }
|
|
|
|
appcActSessParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the partner LU for the session. This
|
|
field is from 1 to 17 characters in length, including a period
|
|
(.) which separates the NetId from the NAU name if the NetId is
|
|
present.
|
|
|
|
If this object has the same value as appcLuPairOperParLuName,
|
|
then the two entries being indexed apply to the same resource
|
|
(specifically, to the same partner LU)."
|
|
::= { appcActSessEntry 2 }
|
|
|
|
appcActSessIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies the index of the session, which is
|
|
unique for this LU pair. It is recommended that an Agent not
|
|
reuse the index of a deactivated session for a significant
|
|
period of time (e.g., one week)."
|
|
::= { appcActSessEntry 3 }
|
|
|
|
appcActSessPcidCpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0 | 3..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network-qualified CP name of the node at which the session
|
|
and PCID originated. For APPN and LEN nodes, this is either CP
|
|
name of the APPN node at which the origin LU is located or the
|
|
CP name of the NN serving the LEN node at which the origin LU
|
|
is located. This field is from 3 to 17 characters in length,
|
|
including a period (.) which separates the NetId from the NAU
|
|
name. A null string indicates that the value is unknown."
|
|
::= { appcActSessEntry 4 }
|
|
|
|
appcActSessPcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0|8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The procedure correlation identifier (PCID) of a session. It
|
|
is an 8-octet value assigned by the control point providing
|
|
session services for the primary LU. A null string indicates
|
|
that the value is unknown."
|
|
::= { appcActSessEntry 5 }
|
|
|
|
appcActSessPluIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localLuIsPlu(1),
|
|
partnerLuIsPlu(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which LU is the PLU for this session. For
|
|
independent LUs, the PLU (primary LU) is the one that initiated
|
|
the session (sent BIND), while the SLU (secondary LU) is the
|
|
one that accepted the session initiation (received BIND).
|
|
|
|
The 'local' LU is the one identified by appcLluOperName.
|
|
|
|
The 'partner' LU is the one identified by
|
|
appcLuPairOperParLuName."
|
|
::= { appcActSessEntry 6 }
|
|
|
|
appcActSessModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode name used for this session."
|
|
::= { appcActSessEntry 7 }
|
|
|
|
appcActSessCosName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Class of Service (COS) name used for this session.
|
|
A null string indicates that the value is unknown."
|
|
::= { appcActSessEntry 8 }
|
|
|
|
appcActSessTransPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
low(2),
|
|
medium(3),
|
|
high(4),
|
|
network(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmission priority of this session.
|
|
1 = unknown priority
|
|
2 = low priority
|
|
3 = medium priority
|
|
4 = high priority
|
|
5 = network priority
|
|
"
|
|
::= { appcActSessEntry 9 }
|
|
|
|
appcActSessEnhanceSecSup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
level1(2),
|
|
level2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enhanced security supported. Indicates the level of enhanced
|
|
security support:
|
|
|
|
1 = none
|
|
2 = level 1
|
|
3 = level 2
|
|
"
|
|
::= { appcActSessEntry 10 }
|
|
|
|
appcActSessSendPacingType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
fixed(2),
|
|
adaptive(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of pacing being used for sending data."
|
|
::= { appcActSessEntry 11 }
|
|
|
|
appcActSessSendRpc OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The send residual pace count. This represents the number of
|
|
MUs that can still be sent in the current session window."
|
|
::= { appcActSessEntry 12 }
|
|
|
|
appcActSessSendNxWndwSize OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the next window which will be used to send data."
|
|
::= { appcActSessEntry 13 }
|
|
|
|
appcActSessRecvPacingType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
fixed(2),
|
|
adaptive(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of pacing being used for receiving data."
|
|
::= { appcActSessEntry 14 }
|
|
|
|
appcActSessRecvRpc OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The receive residual pace count. This represents the number
|
|
|
|
of MUs that can still be received in the current session
|
|
window."
|
|
::= { appcActSessEntry 15 }
|
|
|
|
appcActSessRecvNxWndwSize OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the next window which will be used to receive
|
|
data."
|
|
::= { appcActSessEntry 16 }
|
|
appcActSessRscv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route selection control vector (RSCV CV2B) used for this
|
|
session. It is present for APPN-level implementations.
|
|
LEN-level implementations will return a null string. The
|
|
internal format of this vector is described in SNA Formats.
|
|
This object contains an uninterpreted copy of the control
|
|
vector (including the length and key fields)."
|
|
::= { appcActSessEntry 17 }
|
|
|
|
appcActSessInUse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the session is currently in use (i.e., in
|
|
bracket with a conversation)."
|
|
::= { appcActSessEntry 18 }
|
|
|
|
appcActSessMaxSndRuSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8192)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum RU size used on this session for sending RUs."
|
|
::= { appcActSessEntry 19 }
|
|
|
|
appcActSessMaxRcvRuSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8192)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum RU size used on this session for receiving RUs."
|
|
::= { appcActSessEntry 20 }
|
|
|
|
appcActSessSndPacingSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the send pacing window on this session."
|
|
::= { appcActSessEntry 21 }
|
|
|
|
appcActSessRcvPacingSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the receive pacing window on this session."
|
|
::= { appcActSessEntry 22 }
|
|
|
|
appcActSessOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unbound (1),
|
|
pendingBind (2),
|
|
bound (3),
|
|
pendingUnbind (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value indicates the current operational state of the
|
|
session.
|
|
|
|
'unbound (1)' - session has been unbound;
|
|
in this state it will be removed from the
|
|
session table by the Agent.
|
|
|
|
'pendingBind (2)' - this state has different
|
|
meanings for dependent and independent LUs;
|
|
|
|
for dependent LU - waiting for BIND from
|
|
the host, for independent LU - waiting for
|
|
BIND response. When a session enters this
|
|
state, the corresponding entry in the
|
|
session table is created by the Agent.
|
|
|
|
'bound (3)' - session has been successfully bound.
|
|
|
|
'pendingUnbind (4)' - session enters this state
|
|
when an UNBIND is sent and before the
|
|
rsp(UNBIND) is received.
|
|
|
|
Session deactivation:
|
|
|
|
If a session is in the operational state
|
|
'bound (3)' then setting the value of this
|
|
object to 'unbound (1)' will initiate the
|
|
session shutdown.
|
|
|
|
If a session is in the operational state
|
|
'pendingBind (2)' then setting the value of this
|
|
object to 'unbound (1)' will initiate the session
|
|
shutdown.
|
|
|
|
If a session is in the operational state
|
|
'pendingUnbind (4)' for an abnormally long period
|
|
of time (e.g., three minutes) then setting the value
|
|
of this object to 'unbound (1)' will change the
|
|
session operational state to 'unbound (1)'. "
|
|
::= { appcActSessEntry 23 }
|
|
|
|
appcActSessUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time the session has been active, measured in
|
|
hundredths of a second."
|
|
::= { appcActSessEntry 24 }
|
|
|
|
appcActSessRtpNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local HPR Network Connection Endpoint of the session."
|
|
::= { appcActSessEntry 25 }
|
|
|
|
appcActSessRtpTcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0|8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local RTP connection TCID of the session."
|
|
::= { appcActSessEntry 26 }
|
|
|
|
appcActSessLinkIndex OBJECT-TYPE
|
|
SYNTAX InstancePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies the link over which the session passes.
|
|
This value points to the row in the table containing
|
|
information on the link instance. (e.g., the sdlcLSAdminTable
|
|
of the SNA DLC MIB module). This object may be NULL if the
|
|
link is not specified or if a link is not applicable (as for
|
|
APPN-level nodes)."
|
|
::= { appcActSessEntry 27 }
|
|
|
|
-- ***************************************************************
|
|
-- The following table contains session statistics for APPC sessions.
|
|
-- ***************************************************************
|
|
|
|
appcSessStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcSessStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains dynamic statistical information relating
|
|
to active APPC sessions. The entries in this table cannot be
|
|
created by a Management Station. Two entries are present in
|
|
the table when both session partners are local. This table is
|
|
populated only when the value of appcCntrlOperStat is
|
|
'active'."
|
|
::= { appcSession 2 }
|
|
|
|
appcSessStatsEntry OBJECT-TYPE
|
|
SYNTAX AppcSessStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains statistics information for an APPC session. Each
|
|
entry is created by the Agent. Objects in this table have
|
|
read-only access. Each session from appcActSessTable has one
|
|
entry in this table."
|
|
INDEX { appcSessStatsLocLuName,
|
|
appcSessStatsParLuName,
|
|
appcSessStatsSessIndex }
|
|
::= { appcSessStatsTable 1 }
|
|
|
|
AppcSessStatsEntry ::= SEQUENCE {
|
|
appcSessStatsLocLuName DisplayString,
|
|
appcSessStatsParLuName DisplayString,
|
|
appcSessStatsSessIndex Integer32,
|
|
appcSessStatsSentFmdBytes Counter32,
|
|
appcSessStatsSentNonFmdBytes Counter32,
|
|
appcSessStatsRcvdFmdBytes Counter32,
|
|
appcSessStatsRcvdNonFmdBytes Counter32,
|
|
appcSessStatsSentFmdRus Counter32,
|
|
appcSessStatsSentNonFmdRus Counter32,
|
|
appcSessStatsRcvdFmdRus Counter32,
|
|
appcSessStatsRcvdNonFmdRus Counter32,
|
|
appcSessStatsCtrUpTime TimeTicks
|
|
}
|
|
|
|
appcSessStatsLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the local LU for the session. This
|
|
field is from 1 to 17 characters in length, including a period
|
|
(.) which separates the NetId from the NAU name if the NetId is
|
|
present.
|
|
|
|
If this object has the same value as appcLluOperName, then the
|
|
two entries being indexed apply to the same resource
|
|
(specifically, to the same local LU)."
|
|
::= { appcSessStatsEntry 1 }
|
|
|
|
appcSessStatsParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the partner LU for the session. This
|
|
field is from 1 to 17 characters in length, including a period
|
|
(.) which separates the NetId from the NAU name if the NetId is
|
|
present.
|
|
|
|
If this object has the same value as appcLuPairOperParLuName,
|
|
then the two entries being indexed apply to the same resource
|
|
(specifically, to the same partner LU)."
|
|
::= { appcSessStatsEntry 2 }
|
|
|
|
appcSessStatsSessIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies the index of the session, which is
|
|
unique for this LU pair. It is recommended that an Agent not
|
|
reuse the index of a deactivated session for a significant
|
|
period of time (e.g., one week).
|
|
|
|
If this object has the same value as appcActSessIndex for the
|
|
same LU pair, then the two entries being indexed apply to the
|
|
same resource (specifically, to the same session)."
|
|
::= { appcSessStatsEntry 3 }
|
|
|
|
appcSessStatsSentFmdBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of function management data (FMD) bytes sent by the
|
|
local LU."
|
|
::= { appcSessStatsEntry 4 }
|
|
|
|
appcSessStatsSentNonFmdBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of non-function management data (non-FMD) bytes
|
|
sent by the local LU."
|
|
::= { appcSessStatsEntry 5 }
|
|
|
|
appcSessStatsRcvdFmdBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of function management data (FMD) bytes received by
|
|
the local LU."
|
|
::= { appcSessStatsEntry 6 }
|
|
|
|
appcSessStatsRcvdNonFmdBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of non-function management data (non-FMD) bytes
|
|
received by the local LU."
|
|
::= { appcSessStatsEntry 7 }
|
|
|
|
appcSessStatsSentFmdRus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of function management data (FMD) RUs sent by the
|
|
local LU."
|
|
::= { appcSessStatsEntry 8 }
|
|
|
|
appcSessStatsSentNonFmdRus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of non-function management data (non-FMD) RUs sent
|
|
by the local LU."
|
|
::= { appcSessStatsEntry 9 }
|
|
|
|
appcSessStatsRcvdFmdRus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of function management data (FMD) RUs received by
|
|
the local LU."
|
|
::= { appcSessStatsEntry 10 }
|
|
|
|
appcSessStatsRcvdNonFmdRus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of non-function management data (non-FMD) RUs
|
|
received by the local LU."
|
|
::= { appcSessStatsEntry 11 }
|
|
|
|
appcSessStatsCtrUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time the counters for this session have been
|
|
active, measured in hundredths of a second."
|
|
::= { appcSessStatsEntry 12 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Historical Session Table
|
|
-- ---------------------------------------------------------------------
|
|
-- This table contains historical information about APPC sessions that
|
|
-- terminated abnormally. It is an implementation choice how long to
|
|
-- retain information on a given session.
|
|
-- *********************************************************************
|
|
appcHistSessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcHistSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of historical information about APPC sessions that
|
|
terminated abnormally. Two entries may be present in the table
|
|
when both session partners are local. It is an implementation
|
|
choice how long to retain information about a given session."
|
|
::= { appcSession 3 }
|
|
|
|
appcHistSessEntry OBJECT-TYPE
|
|
SYNTAX AppcHistSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC Session History Table. This table is indexed by
|
|
an integer which is continuously incremented until it
|
|
eventually wraps."
|
|
INDEX
|
|
{ appcHistSessIndex }
|
|
::= { appcHistSessTable 1 }
|
|
|
|
AppcHistSessEntry ::= SEQUENCE {
|
|
appcHistSessIndex INTEGER,
|
|
appcHistSessTime DateAndTime,
|
|
appcHistSessType INTEGER,
|
|
appcHistSessLocLuName DisplayString,
|
|
appcHistSessParLuName DisplayString,
|
|
appcHistSessModeName DisplayString,
|
|
appcHistSessUnbindType OCTET STRING,
|
|
appcHistSessSenseData SnaSenseData,
|
|
appcHistSessComponentId DisplayString,
|
|
appcHistSessDetectModule DisplayString
|
|
}
|
|
|
|
appcHistSessIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table index. The value of the index begins at zero
|
|
and is incremented up to a maximum value of 2**31-1
|
|
(2,147,483,647) before wrapping."
|
|
::= { appcHistSessEntry 1 }
|
|
|
|
appcHistSessTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the session was either terminated or
|
|
failed to be established."
|
|
::= { appcHistSessEntry 2 }
|
|
|
|
appcHistSessType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
recvNegBindRsp(1),
|
|
sendNegBindRsp(2),
|
|
sessActRejected(3),
|
|
unbindSent(4),
|
|
unbindReceived(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of event that caused the entry to be made:
|
|
|
|
recvNegBindRsp - Received a negative bind response from
|
|
the partner LU.
|
|
sendNegBindRsp - Sent a negative bind response to the
|
|
partner LU.
|
|
sessActRejected - Session activation rejected by the
|
|
partner LU.
|
|
unbindSent - Unbind sent to the partner LU.
|
|
unbindReceived - Unbind received from the partner LU.
|
|
|
|
These event types correspond to the five SNA/MS Alerts
|
|
LU62001 through LU62005, documented in the SNA Management
|
|
Services Reference."
|
|
::= { appcHistSessEntry 3 }
|
|
|
|
appcHistSessLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network-qualified local LU name. This field is from 3 to
|
|
17 characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present."
|
|
::= { appcHistSessEntry 4 }
|
|
|
|
appcHistSessParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (3..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network-qualified partner LU name. This field is from 3
|
|
to 17 characters in length, including a period (.) which
|
|
separates the NetId from the NAU name if the NetId is present."
|
|
::= { appcHistSessEntry 5 }
|
|
|
|
appcHistSessModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode name of the session."
|
|
::= { appcHistSessEntry 6 }
|
|
|
|
appcHistSessUnbindType OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of unbind which terminated the session. This
|
|
value is consists of one (1) octet; and its meaning
|
|
is defined in SNA Formats."
|
|
::= { appcHistSessEntry 7 }
|
|
|
|
appcHistSessSenseData OBJECT-TYPE
|
|
SYNTAX SnaSenseData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sense data associated with the termination of the
|
|
session, taken from the negative BIND response or UNBIND
|
|
request."
|
|
::= { appcHistSessEntry 8 }
|
|
|
|
appcHistSessComponentId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The implementation-specific name of the component which
|
|
detected the problem."
|
|
::= { appcHistSessEntry 9 }
|
|
|
|
appcHistSessDetectModule OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The implementation-specific name of the module which
|
|
detected the problem."
|
|
::= { appcHistSessEntry 10 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Session RTP Connection Table
|
|
-- ---------------------------------------------------------------------
|
|
|
|
-- This table contains information on APPC sessions that are being
|
|
-- transported on RTP connections by High Performance Routing (HPR).
|
|
-- *********************************************************************
|
|
appcSessRtpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcSessRtpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table indicating how many APPC sessions terminating in this
|
|
node are transported by each RTP connection."
|
|
::= { appcSession 4 }
|
|
|
|
appcSessRtpEntry OBJECT-TYPE
|
|
SYNTAX AppcSessRtpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC session RTP table."
|
|
INDEX { appcSessRtpNceId,
|
|
appcSessRtpTcid }
|
|
::= { appcSessRtpTable 1 }
|
|
|
|
AppcSessRtpEntry ::= SEQUENCE {
|
|
appcSessRtpNceId OCTET STRING,
|
|
appcSessRtpTcid OCTET STRING,
|
|
appcSessRtpSessions Gauge32
|
|
}
|
|
|
|
appcSessRtpNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local Network Connection Endpoint of the RTP connection."
|
|
::= { appcSessRtpEntry 1 }
|
|
|
|
appcSessRtpTcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCID of the RTP connection."
|
|
::= { appcSessRtpEntry 2 }
|
|
|
|
appcSessRtpSessions OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of APPC sessions terminating in this node
|
|
that are using this RTP connection."
|
|
::= { appcSessRtpEntry 3 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Active Conversation Table
|
|
-- This table contains information about active APPC conversations.
|
|
-- *********************************************************************
|
|
|
|
appcActiveConvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcActiveConvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of information about active APPC Conversations. In this
|
|
context 'active' means that a conversation is currently
|
|
associated with a particular session. Two entries are present
|
|
in the table when both LUs for the session are local."
|
|
::= { appcConversation 1 }
|
|
|
|
appcActiveConvEntry OBJECT-TYPE
|
|
SYNTAX AppcActiveConvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry representing one active APPC Conversation."
|
|
INDEX { appcActiveConvLocLuName,
|
|
appcActiveConvParLuName,
|
|
appcActiveConvSessIndex }
|
|
::= { appcActiveConvTable 1}
|
|
|
|
AppcActiveConvEntry ::= SEQUENCE {
|
|
appcActiveConvLocLuName DisplayString,
|
|
appcActiveConvParLuName DisplayString,
|
|
appcActiveConvSessIndex Integer32,
|
|
appcActiveConvId OCTET STRING,
|
|
appcActiveConvState INTEGER,
|
|
appcActiveConvType INTEGER,
|
|
appcActiveConvCorrelator OCTET STRING,
|
|
appcActiveConvSyncLvl INTEGER,
|
|
appcActiveConvSource INTEGER,
|
|
appcActiveConvDuplex INTEGER,
|
|
appcActiveConvUpTime TimeTicks,
|
|
appcActiveConvSendBytes Counter32,
|
|
appcActiveConvRcvBytes Counter32,
|
|
appcActiveConvUserid DisplayString,
|
|
appcActiveConvPcidNauName DisplayString,
|
|
appcActiveConvPcid OCTET STRING,
|
|
appcActiveConvModeName DisplayString,
|
|
appcActiveConvLuwIdName DisplayString,
|
|
appcActiveConvLuwIdInstance OCTET STRING,
|
|
appcActiveConvLuwIdSequence OCTET STRING,
|
|
appcActiveConvTpName DisplayString
|
|
}
|
|
|
|
appcActiveConvLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU for the conversation. This field
|
|
is from 1 to 17 characters in length, including a period (.)
|
|
which separates the NetId from the NAU name if the NetId is
|
|
present.
|
|
|
|
If this object has the same value as appcLluOperName,
|
|
then the two entries being indexed apply to the same
|
|
resource (specifically, to the same local LU)."
|
|
::= { appcActiveConvEntry 1 }
|
|
|
|
appcActiveConvParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU for the conversation. This
|
|
field is from 1 to 17 characters in length, including a period
|
|
(.) which separates the NetId from the NAU name if the NetId is
|
|
present.
|
|
|
|
If this object has the same value as appcLuPairOperParLuName,
|
|
then the two entries being indexed apply to the same
|
|
resource (specifically, to the same partner LU)."
|
|
::= { appcActiveConvEntry 2 }
|
|
|
|
appcActiveConvSessIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of entry in appcActSessTable that is associated with
|
|
this conversation. If this object has the same value as
|
|
appcActSessIndex for the same LU pair, then the two entries
|
|
being indexed apply to the same resource (specifically, to the
|
|
same session)."
|
|
::= { appcActiveConvEntry 3 }
|
|
|
|
appcActiveConvId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 4-byte ID of the conversation."
|
|
::= { appcActiveConvEntry 4 }
|
|
|
|
appcActiveConvState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
send(2),
|
|
receive(3),
|
|
confirm(4),
|
|
confirmSend(5),
|
|
confirmDealloc(6),
|
|
pendingDeallocate(7),
|
|
pendingPost(8),
|
|
sendReceive(9),
|
|
sendOnly(10),
|
|
receiveOnly(11),
|
|
deferReceive(12),
|
|
deferDeallocate(13),
|
|
syncpoint(14),
|
|
syncpointSend(15),
|
|
syncpointDeallocate(16),
|
|
backoutRequired(17)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the state of the conversation at the instant when
|
|
the information was retrieved. The values are:
|
|
|
|
reset
|
|
The conversation is reset (i.e., deallocated).
|
|
send
|
|
The conversation can send data. This value also
|
|
is returned if the conversation is in
|
|
Send-Pending state.
|
|
receive
|
|
The conversation can receive data.
|
|
confirm
|
|
The conversation has received a confirm
|
|
indicator. It can issue an [MC_]CONFIRMED or
|
|
[MC_]SEND_ERROR verb to change state. It will
|
|
continue in Receive state if an [MC_]CONFIRMED
|
|
verb is issued.
|
|
confirmSend
|
|
The conversation is in Confirm state and changes
|
|
to Send state when an [MC_]CONFIRMED verb is
|
|
issued.
|
|
confirmDealloc
|
|
The conversation is in Confirm state and becomes
|
|
inactive when an [MC_]CONFIRMED verb is issued.
|
|
pendingDeallocate
|
|
The conversation is in Pending-Deallocate state
|
|
while it waits for (MC_)DEALLOCATE TYPE
|
|
(sync_level) to complete.
|
|
pendingPost
|
|
The conversation is in Pending-Post state while
|
|
it waits for the [MC_]RECEIVE_AND_POST verb to
|
|
complete its receive function.
|
|
sendReceive
|
|
The full-duplex conversation can send or receive
|
|
data.
|
|
sendOnly
|
|
The full-duplex conversation can send data, but
|
|
it does not have permission to receive data,
|
|
because the partner TP has already deallocated
|
|
its side of the conversation.
|
|
receiveOnly
|
|
The full-duplex conversation can receive data,
|
|
but it does not have permission to send data,
|
|
because it has already deallocated its side of
|
|
the conversation.
|
|
deferReceive
|
|
Waiting for a successful SYNCPT verb operation to
|
|
go into the receive state.
|
|
deferDeallocate
|
|
Waiting for a successful SYNCPT verb operation to
|
|
go into the reset state.
|
|
|
|
syncpoint
|
|
Need to response to a SYNCPT verb issued. After
|
|
successful operation, the next state will be
|
|
receive.
|
|
syncpointSend
|
|
Need to response to a SYNCPT verb issued. After
|
|
successful operation, the next state will be
|
|
send.
|
|
syncpointDeallocate
|
|
Need to response to a SYNCPT verb issued. After
|
|
successful operation, the next state will be
|
|
reset.
|
|
backoutRequired
|
|
TP must execute a BACKOUT verb to backout the
|
|
transaction."
|
|
::= { appcActiveConvEntry 5 }
|
|
|
|
appcActiveConvType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
basic(1),
|
|
mapped(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of conversation. The values are:
|
|
|
|
basic
|
|
Indicates that this conversation supports
|
|
basic verbs.
|
|
|
|
mapped
|
|
Indicates that this conversation supports
|
|
mapped verbs."
|
|
::= { appcActiveConvEntry 6 }
|
|
|
|
appcActiveConvCorrelator OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an 8-byte identifier that the source LU assigns to the
|
|
conversation; the source LU is the one that sent the allocation
|
|
request. The conversation correlator is included on the
|
|
allocation request. The conversation correlator uniquely
|
|
|
|
identifies a conversation, from among all conversations,
|
|
between the local and partner LUs. It may be used, for
|
|
example, during problem determination associated with a
|
|
conversation. A length of 0 indicates that no conversation
|
|
correlator is defined."
|
|
::= { appcActiveConvEntry 7 }
|
|
|
|
appcActiveConvSyncLvl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
confirm(2),
|
|
syncpt(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the highest sync level support for the conversation.
|
|
The values are:
|
|
|
|
none
|
|
Indicates that no sync-level processing can be
|
|
performed on this conversation. The
|
|
transaction program does not issue verbs or
|
|
recognize any returned parameters
|
|
relating to any sync-level function.
|
|
|
|
confirm
|
|
Indicates that confirmation processing can be
|
|
performed on this conversation. The
|
|
transaction program can issue verbs and
|
|
recognize returned parameters relating to
|
|
confirmation.
|
|
|
|
syncpt
|
|
Indicates that syncpt and confirmation processing
|
|
can be performed on this conversation. The
|
|
transaction program can issue verbs and recognize
|
|
returned parameters relating to syncpt and
|
|
confirmation."
|
|
::= { appcActiveConvEntry 8 }
|
|
|
|
appcActiveConvSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localLu(1),
|
|
partnerLu(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the local or partner LU is the source of the
|
|
conversation, that is, which LU started the conversation by
|
|
sending the allocation request.
|
|
|
|
localLu
|
|
The local LU is the source of the conversation,
|
|
and the partner LU is the target of the
|
|
conversation.
|
|
|
|
partnerLu
|
|
The partner LU is the source of the
|
|
conversation, and the local LU is the target of
|
|
the conversation."
|
|
::= { appcActiveConvEntry 9 }
|
|
|
|
appcActiveConvDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
half(1),
|
|
full(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the conversation duplex style in effect for the
|
|
conversation.
|
|
|
|
half Indicates that information can be transferred in
|
|
both directions, but only in one direction at a
|
|
time.
|
|
|
|
full Indicates that information can be transferred in
|
|
both directions at the same time."
|
|
::= { appcActiveConvEntry 10 }
|
|
|
|
appcActiveConvUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time since the conversation started, measured in
|
|
hundredths of a second."
|
|
::= { appcActiveConvEntry 11 }
|
|
|
|
appcActiveConvSendBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of bytes that was sent on the
|
|
conversation. The count includes all SNA RU bytes sent,
|
|
including those in the FMH-5 (Attach), FMH-7 (Error
|
|
Description), SIGNAL, LUSTAT, and SNA responses; it does not
|
|
include SNA TH and RH bytes."
|
|
::= { appcActiveConvEntry 12 }
|
|
|
|
appcActiveConvRcvBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of bytes that was received on the
|
|
conversation. The count includes all SNA RU bytes sent,
|
|
including those in the FMH-5 (Attach), FMH-7 (Error
|
|
Description), SIGNAL, LUSTAT, and SNA responses; it does not
|
|
include SNA TH and RH bytes."
|
|
::= { appcActiveConvEntry 13 }
|
|
|
|
appcActiveConvUserid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user ID that the initiating program provided in the
|
|
incoming attach."
|
|
::= { appcActiveConvEntry 14 }
|
|
|
|
appcActiveConvPcidNauName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0 | 3..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network-qualified NAU name of the
|
|
node at which the session and PCID originated. For APPN
|
|
and LEN nodes, this is either CP name of the APPN node at
|
|
which the origin LU is located or the CP name of the
|
|
NN serving the LEN node at which the origin LU is
|
|
located. This field is from 3 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
|
|
NetId from the NAU name. A null string indicates
|
|
that the value is unknown."
|
|
::= { appcActiveConvEntry 15 }
|
|
|
|
appcActiveConvPcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0|8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The procedure correlation identifier (PCID) of the session.
|
|
It is an 8-octet value assigned by the control point providing
|
|
session services for the primary LU. A null string indicates
|
|
that the value is unknown."
|
|
::= { appcActiveConvEntry 16 }
|
|
|
|
appcActiveConvModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mode Name used for this conversation.
|
|
This is a 1-8 character name."
|
|
::= { appcActiveConvEntry 17 }
|
|
|
|
appcActiveConvLuwIdName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the LU that initiated the logical unit of work
|
|
that is associated with this active TP. This field is from
|
|
1 to 17 characters in length, including a period (.) which
|
|
separates the NetId from the LU name if the NetId is present."
|
|
::= { appcActiveConvEntry 18 }
|
|
|
|
appcActiveConvLuwIdInstance OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instance identifier for the logical unit of work."
|
|
::= { appcActiveConvEntry 19 }
|
|
|
|
appcActiveConvLuwIdSequence OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence identifier for the logical unit of work."
|
|
::= { appcActiveConvEntry 20 }
|
|
|
|
appcActiveConvTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction program name which started this conversation.
|
|
This name could either be from a FMH5 ATTACH for a remotely
|
|
started conversation, otherwise it could the name of the local
|
|
TP if available.
|
|
|
|
When the TP name consists entirely of displayable EBCDIC code
|
|
points, it is mapped directly to the equivalent ASCII display
|
|
string. However, registered TP names always have a non-
|
|
displayable EBCDIC code point (value less than or equal to
|
|
x'3F') as the first character, so they cannot be directly
|
|
mapped to an ASCII display string. These TP names are
|
|
converted to a display string that is equivalent to a
|
|
hexadecimal display of the EBCDIC code points. For example,
|
|
the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
|
|
ASCII display string '06F1' (including the two single quotes).
|
|
|
|
This name is NULL if the conversation is started locally
|
|
(i.e., not with a FMH5 ATTACH)."
|
|
::= { appcActiveConvEntry 21 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC Historical Conversation Table
|
|
-- This table contains historical information about APPC
|
|
-- conversations that ended abnormally. It is an implementation
|
|
-- choice how long to retain information on a given conversation.
|
|
-- *********************************************************************
|
|
|
|
appcHistConvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcHistConvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of historical information about APPC Conversations that
|
|
|
|
ended in error. Possible categories of error conditions that
|
|
could be saved in this table are:
|
|
|
|
- allocation errors,
|
|
- deallocate abend,
|
|
- program errors, and
|
|
- service errors."
|
|
::= { appcConversation 2 }
|
|
|
|
appcHistConvEntry OBJECT-TYPE
|
|
SYNTAX AppcHistConvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry representing one APPC Conversation."
|
|
INDEX
|
|
{ appcHistConvIndex }
|
|
::= { appcHistConvTable 1}
|
|
|
|
AppcHistConvEntry ::= SEQUENCE {
|
|
appcHistConvIndex Integer32,
|
|
appcHistConvEndTime DateAndTime,
|
|
appcHistConvLocLuName DisplayString,
|
|
appcHistConvParLuName DisplayString,
|
|
appcHistConvTpName DisplayString,
|
|
appcHistConvPcidNauName DisplayString,
|
|
appcHistConvPcid OCTET STRING,
|
|
appcHistConvSenseData SnaSenseData,
|
|
appcHistConvLogData OCTET STRING,
|
|
appcHistConvEndedBy INTEGER
|
|
}
|
|
|
|
appcHistConvIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for entry in Conversation table. This value identifies
|
|
the unique index of the conversation. It is recommended that
|
|
an Agent not reuse the index of a deactivated conversation for
|
|
a significant period of time (e.g. one week)."
|
|
::= { appcHistConvEntry 1 }
|
|
|
|
appcHistConvEndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the conversation ended."
|
|
::= { appcHistConvEntry 2 }
|
|
|
|
appcHistConvLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the local LU for this conversation. This field is
|
|
from 1 to 17 characters in length, including a period (.) which
|
|
separates the NetId from the NAU name if the NetId is present."
|
|
::= { appcHistConvEntry 3 }
|
|
|
|
appcHistConvParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU for the conversation. This
|
|
field is from 1 to 17 characters in length, including a period
|
|
(.) which separates the NetId from the NAU name if the NetId is
|
|
present."
|
|
::= { appcHistConvEntry 4 }
|
|
|
|
appcHistConvTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction program name which started this conversation.
|
|
This name could either be from a FMH5 ATTACH for a remotely
|
|
started conversation, otherwise it could the name of the local
|
|
TP if available.
|
|
|
|
When the TP name consists entirely of displayable EBCDIC code
|
|
points, it is mapped directly to the equivalent ASCII display
|
|
string. However, registered TP names always have a non-
|
|
displayable EBCDIC code point (value less than or equal to
|
|
x'3F') as the first character, so they cannot be directly
|
|
mapped to an ASCII display string. These TP names are
|
|
converted to a display string that is equivalent to a
|
|
|
|
hexadecimal display of the EBCDIC code points. For example,
|
|
the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
|
|
ASCII display string '06F1' (including the two single quotes).
|
|
|
|
This name is NULL if the conversation is started locally
|
|
(i.e., not with a FMH5 ATTACH)."
|
|
::= { appcHistConvEntry 5 }
|
|
|
|
appcHistConvPcidNauName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0 | 3..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network-qualified NAU name of the
|
|
node at which the session and PCID originated. For APPN
|
|
and LEN nodes, this is either CP name of the APPN node at
|
|
which the origin LU is located or the CP name of the
|
|
NN serving the LEN node at which the origin LU is
|
|
located. This field is from 3 to 17 characters in
|
|
length, including a period (.) which separates the
|
|
NetId from the NAU name. A null string indicates that the
|
|
value is unknown."
|
|
::= { appcHistConvEntry 6 }
|
|
|
|
appcHistConvPcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0|8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The procedure correlation identifier (PCID) of the session.
|
|
It is an 8-octet value assigned by the control point providing
|
|
session services for the primary LU. A null string indicates
|
|
that the value is unknown."
|
|
::= { appcHistConvEntry 7 }
|
|
|
|
appcHistConvSenseData OBJECT-TYPE
|
|
SYNTAX SnaSenseData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sense data associated with the action that ended this
|
|
conversation, e.g., FMH-7 or UNBIND."
|
|
::= { appcHistConvEntry 8 }
|
|
|
|
appcHistConvLogData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first 32 bytes of the data portion of the Log Data GDS
|
|
Variable that is associated with the last FMH-7 that occurred
|
|
on this conversation. If there was no Log Data GDS Variable
|
|
associated with the FMH-7, this object is null.
|
|
|
|
This object reflects only the data portion of the Log Data
|
|
GDS Variable (i.e. not the LL or GDS Id)."
|
|
::= { appcHistConvEntry 9 }
|
|
|
|
appcHistConvEndedBy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localLu(1),
|
|
partnerLu(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which LU ended the conversation."
|
|
::= { appcHistConvEntry 10 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC CPIC Admin Table
|
|
-- Objects in this table contain default or expected configuration
|
|
-- values for CPI-C side information.
|
|
-- *********************************************************************
|
|
appcCpicAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcCpicAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC CPI-C side information table."
|
|
::= { appcCPIC 1 }
|
|
|
|
appcCpicAdminEntry OBJECT-TYPE
|
|
SYNTAX AppcCpicAdminEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC CPI-C side information Table."
|
|
INDEX { appcCpicAdminLocLuName,
|
|
appcCpicAdminSymbDestName }
|
|
::= { appcCpicAdminTable 1 }
|
|
|
|
AppcCpicAdminEntry ::= SEQUENCE {
|
|
appcCpicAdminLocLuName DisplayString,
|
|
appcCpicAdminSymbDestName DisplayString,
|
|
appcCpicAdminParLuAlias DisplayString,
|
|
appcCpicAdminParLuName DisplayString,
|
|
appcCpicAdminModeName DisplayString,
|
|
appcCpicAdminTpNameType INTEGER,
|
|
appcCpicAdminTpName DisplayString,
|
|
appcCpicAdminUserid DisplayString,
|
|
appcCpicAdminSecurity INTEGER
|
|
}
|
|
|
|
appcCpicAdminLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU to which this CPI-C side
|
|
information definition applies. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present.
|
|
|
|
The reserved value '*ALL' indicates that the definition applies
|
|
to all local LUs, and not just to a single local LU."
|
|
::= { appcCpicAdminEntry 1 }
|
|
|
|
appcCpicAdminSymbDestName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the symbolic destination name used by CPI-C
|
|
applications to identify this definition."
|
|
::= { appcCpicAdminEntry 2 }
|
|
|
|
appcCpicAdminParLuAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local alias for the partner LU. If not known or
|
|
|
|
not applicable, this object contains a zero-length
|
|
string."
|
|
::= { appcCpicAdminEntry 3 }
|
|
|
|
appcCpicAdminParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present."
|
|
::= { appcCpicAdminEntry 4 }
|
|
|
|
appcCpicAdminModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode name. A mode defines the characteristics
|
|
for a group of sessions. The mode name can be blank (8 space
|
|
characters)."
|
|
::= { appcCpicAdminEntry 5 }
|
|
|
|
appcCpicAdminTpNameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
snaServiceTp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the TP name in appcCpicAdminTpName
|
|
identifies a normal TP or an SNA service TP. In this context,
|
|
a normal TP is one with a name consisting only of displayable
|
|
characters, while an SNA service TP has a name containing
|
|
octets that do not map to displayable characters."
|
|
::= { appcCpicAdminEntry 6 }
|
|
|
|
appcCpicAdminTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the partner TP to be used when a CPI-C
|
|
application initiates a conversation specifying this side
|
|
information entry.
|
|
|
|
Display convention
|
|
|
|
When the TP name consists entirely of displayable EBCDIC
|
|
code points, it is mapped directly to the equivalent ASCII
|
|
display string. However, registered TP names always have a
|
|
non-displayable EBCDIC code point (value less than or equal
|
|
to x'3F') as the first character, so they cannot be
|
|
directly mapped to an ASCII display string. These TP names
|
|
are converted to a display string that is equivalent to a
|
|
hexadecimal display of the EBCDIC code points. For
|
|
example, the 2-byte TP name x'06F1' (CNOS) is converted to
|
|
the 6-byte ASCII display string '06F1' (including the two
|
|
single quotes)."
|
|
::= { appcCpicAdminEntry 7 }
|
|
|
|
appcCpicAdminUserid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The security userid, if any, associated with the side
|
|
information definition."
|
|
::= { appcCpicAdminEntry 8 }
|
|
|
|
appcCpicAdminSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
same(2),
|
|
pgm(3),
|
|
pgmStrong(4),
|
|
distributed(5),
|
|
mutual(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the security information to be used for allocating
|
|
the conversation.
|
|
|
|
none - No security information.
|
|
same - Use the security environment currently
|
|
associated with this TP.
|
|
pgm - Use the program-supplied user_id and password.
|
|
pgmStrong - Use the program-supplied user_id and password.
|
|
The local LU will insure that the password is
|
|
not exposed in clear-text form on the physical
|
|
network.
|
|
distributed - Use the security environment and a distributed
|
|
security system to generate the authentication
|
|
information for this request. If distributed
|
|
security tokens cannot be generated, then fail
|
|
the conversation.
|
|
mutual - Authenticate both the user to the destination
|
|
system and the destination system to the user."
|
|
::= { appcCpicAdminEntry 9 }
|
|
|
|
-- *********************************************************************
|
|
-- APPC CPIC Oper Table
|
|
-- Objects in this table contain current operational values, such
|
|
-- as state values or negotiated parameters, for CPI-C side
|
|
-- information.
|
|
-- *********************************************************************
|
|
|
|
appcCpicOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AppcCpicOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APPC CPI-C side information operational table."
|
|
::= { appcCPIC 2 }
|
|
|
|
appcCpicOperEntry OBJECT-TYPE
|
|
SYNTAX AppcCpicOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of APPC CPI-C side information Table."
|
|
INDEX { appcCpicOperLocLuName,
|
|
appcCpicOperSymbDestName }
|
|
::= { appcCpicOperTable 1 }
|
|
|
|
AppcCpicOperEntry ::= SEQUENCE {
|
|
appcCpicOperLocLuName DisplayString,
|
|
appcCpicOperSymbDestName DisplayString,
|
|
appcCpicOperParLuAlias DisplayString,
|
|
appcCpicOperParLuName DisplayString,
|
|
appcCpicOperModeName DisplayString,
|
|
appcCpicOperTpNameType INTEGER,
|
|
appcCpicOperTpName DisplayString,
|
|
appcCpicOperUserid DisplayString,
|
|
appcCpicOperSecurity INTEGER
|
|
}
|
|
|
|
appcCpicOperLocLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the local LU to which this CPI-C side
|
|
information definition applies. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present.
|
|
|
|
The reserved value '*ALL' indicates that the definition applies
|
|
to all local LUs, and not just to a single local LU."
|
|
::= { appcCpicOperEntry 1 }
|
|
|
|
appcCpicOperSymbDestName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the symbolic destination name used by CPI-C
|
|
applications to identify this definition."
|
|
::= { appcCpicOperEntry 2 }
|
|
|
|
appcCpicOperParLuAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local alias for the partner LU. If not known or not
|
|
applicable, this object contains a zero-length string."
|
|
::= { appcCpicOperEntry 3 }
|
|
|
|
appcCpicOperParLuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the partner LU. This field is from 1 to 17
|
|
characters in length, including a period (.) which separates
|
|
the NetId from the NAU name if the NetId is present."
|
|
::= { appcCpicOperEntry 4 }
|
|
|
|
appcCpicOperModeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the mode name. A mode defines the characteristics
|
|
for a group of sessions. The mode name can be blank (8 space
|
|
characters)."
|
|
::= { appcCpicOperEntry 5 }
|
|
|
|
appcCpicOperTpNameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
snaServiceTp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the TP name in appcCpicOperTpName identifies
|
|
a normal TP or an SNA service TP. In this context, a normal TP
|
|
is one with a name consisting only of displayable characters,
|
|
while an SNA service TP has a name containing octets that do
|
|
not map to displayable characters."
|
|
::= { appcCpicOperEntry 6 }
|
|
|
|
appcCpicOperTpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the partner TP to be used when a CPI-C
|
|
application initiates a conversation specifying this side
|
|
information entry.
|
|
|
|
Display convention
|
|
|
|
When the TP name consists entirely of displayable EBCDIC
|
|
code points, it is mapped directly to the equivalent ASCII
|
|
display string. However, registered TP names always have
|
|
a non-displayable EBCDIC code point (value less than or
|
|
equal to x'3F') as the first character, so they cannot be
|
|
directly mapped to an ASCII display string. These TP
|
|
names are converted to a display string that is equivalent
|
|
to a hexadecimal display of the EBCDIC code points. For
|
|
example, the 2-byte TP name x'06F1' (CNOS) is converted to
|
|
the 6-byte ASCII display string '06F1' (including the two
|
|
single quotes)."
|
|
::= { appcCpicOperEntry 7 }
|
|
|
|
appcCpicOperUserid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The security userid, if any, associated with the active side
|
|
information definition."
|
|
::= { appcCpicOperEntry 8 }
|
|
|
|
appcCpicOperSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
same(2),
|
|
pgm(3),
|
|
pgmStrong(4),
|
|
distributed(5),
|
|
mutual(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the security information to be used for allocating
|
|
the conversation.
|
|
|
|
none - No security information.
|
|
same - Use the security environment currently
|
|
associated with this TP.
|
|
pgm - Use the program-supplied user_id and password.
|
|
pgmStrong - Use the program-supplied user_id and password.
|
|
The local LU will insure that the password is
|
|
not exposed in clear-text form on the physical
|
|
|
|
network.
|
|
distributed - Use the security environment and a distributed
|
|
security system to generate the authentication
|
|
information for this request. If distributed
|
|
security tokens cannot be generated, then fail
|
|
the conversation.
|
|
mutual - Authenticate both the user to the destination
|
|
system and the destination system to the user."
|
|
::= { appcCpicOperEntry 9 }
|
|
|
|
-- ***************************************************************
|
|
-- Conformance information
|
|
-- ***************************************************************
|
|
|
|
appcConformance OBJECT IDENTIFIER ::= {appcMIB 2 }
|
|
|
|
appcCompliances OBJECT IDENTIFIER ::= {appcConformance 1 }
|
|
appcGroups OBJECT IDENTIFIER ::= {appcConformance 2 }
|
|
|
|
-- Compliance statements
|
|
appcCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMPv2 entities which
|
|
implement the APPC MIB."
|
|
|
|
MODULE -- this module
|
|
|
|
-- Unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
appcGlobalConfGroup,
|
|
appcLluConfGroup,
|
|
appcParLuConfGroup,
|
|
appcModeConfGroup,
|
|
appcTpConfGroup,
|
|
appcSessionConfGroup
|
|
}
|
|
|
|
-- Conditionally mandatory groups
|
|
GROUP appcControlConfGroup
|
|
DESCRIPTION
|
|
"The appcControlConfGroup is mandatory only for those
|
|
entities which implement activation and deactivation of
|
|
specific controls such as statistics collecting and
|
|
counting."
|
|
|
|
GROUP appcCnosConfGroup
|
|
DESCRIPTION
|
|
"The appcCnosConfGroup is mandatory only for those entities
|
|
which implement CNOS. "
|
|
|
|
GROUP appcCpicConfGroup
|
|
DESCRIPTION
|
|
"The appcCpicConfGroup is mandatory only for those entities
|
|
which implement CPI-C. "
|
|
|
|
GROUP appcConversationConfGroup
|
|
DESCRIPTION
|
|
"The appcConversationConfGroup is mandatory only for those
|
|
entities which implement session endpoints for non-control
|
|
APPC sessions."
|
|
|
|
-- MIN-ACCESS for objects
|
|
OBJECT appcActSessOperState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"An implementation is not required to support session
|
|
deactivation via this object."
|
|
::= {appcCompliances 1 }
|
|
|
|
-- Units of conformance
|
|
appcGlobalConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcUpTime,
|
|
appcDefaultModeName,
|
|
appcDefaultLuName,
|
|
appcDefaultImplInbndPlu,
|
|
appcDefaultMaxMcLlSndSize,
|
|
appcDefaultFileSpec,
|
|
appcDefaultTpOperation,
|
|
appcDefaultTpConvSecRqd,
|
|
appcLocalCpName,
|
|
appcActiveSessions,
|
|
appcActiveHprSessions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
global information and defaults."
|
|
::= { appcGroups 1 }
|
|
|
|
appcLluConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcLluAdminDepType,
|
|
appcLluAdminLocalAddress,
|
|
appcLluAdminSessLimit,
|
|
appcLluAdminBindRspMayQ,
|
|
appcLluAdminCompression,
|
|
appcLluAdminInBoundCompLevel,
|
|
appcLluAdminOutBoundCompLevel,
|
|
appcLluAdminCompRleBeforeLZ,
|
|
appcLluAdminAlias,
|
|
appcLluOperDepType,
|
|
appcLluOperLocalAddress,
|
|
appcLluOperSessLimit,
|
|
appcLluOperBindRspMayQ,
|
|
appcLluOperCompression,
|
|
appcLluOperInBoundCompLevel,
|
|
appcLluOperOutBoundCompLevel,
|
|
appcLluOperCompRleBeforeLZ,
|
|
appcLluOperAlias,
|
|
appcLluOperActiveSessions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
local LU6.2s."
|
|
::= { appcGroups 2 }
|
|
|
|
appcParLuConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcLuPairAdminParLuAlias,
|
|
appcLuPairAdminSessLimit,
|
|
appcLuPairAdminSessSec,
|
|
appcLuPairAdminSecAccept,
|
|
appcLuPairAdminLinkObjId,
|
|
appcLuPairAdminParaSessSup,
|
|
appcLuPairOperParLuAlias,
|
|
appcLuPairOperSessLimit,
|
|
appcLuPairOperSessSec,
|
|
appcLuPairOperSecAccept,
|
|
appcLuPairOperLinkObjId,
|
|
appcLuPairOperParaSessSup,
|
|
appcLuPairOperParaSessSupLS,
|
|
appcLuPairOperState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
partner LUs."
|
|
::= { appcGroups 3 }
|
|
|
|
appcModeConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcModeAdminCosName,
|
|
appcModeAdminSessEndTpName,
|
|
appcModeAdminMaxSessLimit,
|
|
appcModeAdminMinCwinLimit,
|
|
appcModeAdminMinClosLimit,
|
|
appcModeAdminConWinAutoActLmt,
|
|
appcModeAdminRecvPacWinSz,
|
|
appcModeAdminSendPacWinSz,
|
|
appcModeAdminPrefRecvRuSz,
|
|
appcModeAdminPrefSendRuSz,
|
|
appcModeAdminRecvRuSzUpBnd,
|
|
appcModeAdminSendRuSzUpBnd,
|
|
appcModeAdminRecvRuSzLoBnd,
|
|
appcModeAdminSendRuSzLoBnd,
|
|
appcModeAdminSingSessReinit,
|
|
appcModeAdminCompression,
|
|
appcModeAdminInBoundCompLevel,
|
|
appcModeAdminOutBoundCompLevel,
|
|
appcModeAdminCompRleBeforeLZ,
|
|
appcModeAdminSyncLvl,
|
|
appcModeAdminCrypto,
|
|
appcModeOperCosName,
|
|
appcModeOperSessEndTpName,
|
|
appcModeOperSessLimit,
|
|
appcModeOperMaxSessLimit,
|
|
appcModeOperMinCwinLimit,
|
|
appcModeOperMinClosLimit,
|
|
appcModeOperConWinAutoActLmt,
|
|
appcModeOperRecvPacWinSz,
|
|
appcModeOperSendPacWinSz,
|
|
appcModeOperPrefRecvRuSz,
|
|
appcModeOperPrefSendRuSz,
|
|
appcModeOperRecvRuSzUpBnd,
|
|
appcModeOperSendRuSzUpBnd,
|
|
appcModeOperRecvRuSzLoBnd,
|
|
appcModeOperSendRuSzLoBnd,
|
|
appcModeOperSingSessReinit,
|
|
appcModeOperCompression,
|
|
appcModeOperInBoundCompLevel,
|
|
appcModeOperOutBoundCompLevel,
|
|
appcModeOperCompRleBeforeLZ,
|
|
appcModeOperSyncLvl,
|
|
appcModeOperCrypto,
|
|
appcModeOperSyncLvlLastStart,
|
|
appcModeOperCryptoLastStart,
|
|
appcModeOperCNOSNeg,
|
|
appcModeOperActCwin,
|
|
appcModeOperActClos,
|
|
appcModeOperPndCwin,
|
|
appcModeOperPndClos,
|
|
appcModeOperPtmCwin,
|
|
appcModeOperPtmClos,
|
|
appcModeOperDrainSelf,
|
|
appcModeOperDrainPart
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
modes."
|
|
::= { appcGroups 4 }
|
|
|
|
appcTpConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcTpAdminFileSpec,
|
|
appcTpAdminStartParm,
|
|
appcTpAdminTpOperation,
|
|
appcTpAdminInAttachTimeout,
|
|
appcTpAdminRcvAllocTimeout,
|
|
appcTpAdminSyncLvl,
|
|
appcTpAdminInstLmt,
|
|
appcTpAdminStatus,
|
|
appcTpAdminLongRun,
|
|
appcTpAdminConvType,
|
|
appcTpAdminConvDuplex,
|
|
appcTpAdminConvSecReq,
|
|
appcTpAdminVerPip,
|
|
appcTpAdminPipSubNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
Transaction Programs."
|
|
::= { appcGroups 5 }
|
|
|
|
appcSessionConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcActSessPcidCpName,
|
|
appcActSessPcid,
|
|
appcActSessPluIndicator,
|
|
appcActSessModeName,
|
|
appcActSessCosName,
|
|
appcActSessTransPriority,
|
|
appcActSessEnhanceSecSup,
|
|
appcActSessSendPacingType,
|
|
appcActSessSendRpc,
|
|
appcActSessSendNxWndwSize,
|
|
appcActSessRecvPacingType,
|
|
appcActSessRecvRpc,
|
|
appcActSessRecvNxWndwSize,
|
|
appcActSessRscv,
|
|
appcActSessInUse,
|
|
appcActSessMaxSndRuSize,
|
|
appcActSessMaxRcvRuSize,
|
|
appcActSessSndPacingSize,
|
|
appcActSessRcvPacingSize,
|
|
appcActSessOperState,
|
|
appcActSessUpTime,
|
|
appcActSessRtpNceId,
|
|
appcActSessRtpTcid,
|
|
appcActSessLinkIndex,
|
|
appcSessStatsSentFmdBytes,
|
|
appcSessStatsSentNonFmdBytes,
|
|
appcSessStatsRcvdFmdBytes,
|
|
appcSessStatsRcvdNonFmdBytes,
|
|
appcSessStatsSentFmdRus,
|
|
appcSessStatsSentNonFmdRus,
|
|
appcSessStatsRcvdFmdRus,
|
|
appcSessStatsRcvdNonFmdRus,
|
|
appcSessStatsCtrUpTime,
|
|
appcHistSessTime,
|
|
appcHistSessType,
|
|
appcHistSessLocLuName,
|
|
appcHistSessParLuName,
|
|
appcHistSessModeName,
|
|
appcHistSessUnbindType,
|
|
appcHistSessSenseData,
|
|
appcHistSessComponentId,
|
|
appcHistSessDetectModule,
|
|
appcSessRtpSessions
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
LU6.2 sessions."
|
|
::= { appcGroups 6 }
|
|
|
|
appcControlConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcCntrlAdminStat,
|
|
appcCntrlAdminRscv,
|
|
appcCntrlAdminTrace,
|
|
appcCntrlAdminTraceParm,
|
|
appcCntrlOperStat,
|
|
appcCntrlOperStatTime,
|
|
appcCntrlOperRscv,
|
|
appcCntrlOperRscvTime,
|
|
appcCntrlOperTrace,
|
|
appcCntrlOperTraceTime,
|
|
appcCntrlOperTraceParm
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
control."
|
|
::= { appcGroups 7 }
|
|
|
|
appcCnosConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcCnosCommand,
|
|
appcCnosMaxSessLimit,
|
|
appcCnosMinCwinLimit,
|
|
appcCnosMinClosLimit,
|
|
appcCnosDrainSelf,
|
|
appcCnosDrainPart,
|
|
appcCnosResponsible,
|
|
appcCnosForce,
|
|
appcCnosTargetLocLuName,
|
|
appcCnosTargetParLuName,
|
|
appcCnosTargetModeName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
CNOS processing."
|
|
::= { appcGroups 8 }
|
|
|
|
appcCpicConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcCpicAdminParLuAlias,
|
|
appcCpicAdminParLuName,
|
|
appcCpicAdminModeName,
|
|
appcCpicAdminTpNameType,
|
|
appcCpicAdminTpName,
|
|
appcCpicAdminUserid,
|
|
appcCpicAdminSecurity,
|
|
appcCpicOperParLuAlias,
|
|
appcCpicOperParLuName,
|
|
appcCpicOperModeName,
|
|
appcCpicOperTpNameType,
|
|
appcCpicOperTpName,
|
|
appcCpicOperUserid,
|
|
appcCpicOperSecurity
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
CPI-C side information."
|
|
::= { appcGroups 9 }
|
|
|
|
appcConversationConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
appcActiveConvId,
|
|
appcActiveConvState,
|
|
appcActiveConvType,
|
|
appcActiveConvCorrelator,
|
|
appcActiveConvSyncLvl,
|
|
appcActiveConvSource,
|
|
appcActiveConvDuplex,
|
|
appcActiveConvUpTime,
|
|
appcActiveConvSendBytes,
|
|
appcActiveConvRcvBytes,
|
|
appcActiveConvUserid,
|
|
appcActiveConvPcidNauName,
|
|
appcActiveConvPcid,
|
|
appcActiveConvModeName,
|
|
appcActiveConvLuwIdName,
|
|
appcActiveConvLuwIdInstance,
|
|
appcActiveConvLuwIdSequence,
|
|
appcActiveConvTpName,
|
|
appcHistConvEndTime,
|
|
appcHistConvLocLuName,
|
|
appcHistConvParLuName,
|
|
appcHistConvTpName,
|
|
appcHistConvPcidNauName,
|
|
appcHistConvPcid,
|
|
appcHistConvSenseData,
|
|
appcHistConvLogData,
|
|
appcHistConvEndedBy
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of APPC
|
|
conversations."
|
|
::= { appcGroups 10 }
|
|
|
|
-- end of conformance statement
|
|
|
|
END
|