2363 lines
79 KiB
Plaintext
2363 lines
79 KiB
Plaintext
-- *****************************************************************
|
|
-- QTECH-SYSTEM-MIB.mib: Qtech System MIB file
|
|
--
|
|
-- March 2002, Wuzg
|
|
--
|
|
-- Copyright (c) 2002 by Qtech Networks Co.,Ltd.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
--
|
|
|
|
QTECH-SYSTEM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Integer32,
|
|
TimeTicks,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString,
|
|
MacAddress
|
|
FROM SNMPv2-TC
|
|
Gauge
|
|
FROM RFC1155-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
qtechApMacAddr
|
|
FROM QTECH-AC-MGMT-MIB
|
|
qtechMemoryPoolCurrentUtilization
|
|
FROM QTECH-MEMORY-MIB
|
|
qtechCPUUtilization1Min,
|
|
Percent
|
|
FROM QTECH-PROCESS-MIB
|
|
qtechMgmt
|
|
FROM QTECH-SMI;
|
|
|
|
qtechSystemMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200203200000Z"
|
|
ORGANIZATION "Qtech Networks Co.,Ltd."
|
|
CONTACT-INFO
|
|
"
|
|
Tel: 4008-111-000
|
|
|
|
E-mail: service@qtech.com.cn"
|
|
DESCRIPTION
|
|
"This module defines qtech system mibs."
|
|
REVISION "200203200000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { qtechMgmt 1}
|
|
|
|
qtechSystemMIBObjects OBJECT IDENTIFIER ::= { qtechSystemMIB 1 }
|
|
|
|
qtechSystemHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the Revision number of hardware resides
|
|
on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 1 }
|
|
|
|
qtechSystemSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the Revision number of software resides
|
|
on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 2 }
|
|
|
|
qtechSystemBootVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the Revision number of BOOT software resides
|
|
on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 3 }
|
|
|
|
qtechSystemSysCtrlVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the Revision number of CTRL software resides
|
|
on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 4 }
|
|
|
|
qtechSystemParametersSave OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Save all parameters changed in configuration by setting
|
|
this object to any value but 0, set its value to 0 will
|
|
cause no action of agent, otherwise all changes of
|
|
prarameters will be saved for retrive when system is
|
|
reset, if parameter is changed but not saved all changes
|
|
will come to their original value when system down and up
|
|
again, when query always return value 0."
|
|
::= { qtechSystemMIBObjects 5 }
|
|
|
|
qtechSystemOutBandRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
baud9600 (1),
|
|
baud19200 (2),
|
|
baud38400 (3),
|
|
baud57600 (4),
|
|
baud115200 (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determine the console(OutBand) baud rate :
|
|
9600 - 1,19200 - 2, 38300 - 3, 57600 - 4, 115200 - 5,
|
|
when the console baud rate is other value will return value 0."
|
|
::= { qtechSystemMIBObjects 6 }
|
|
|
|
qtechSystemReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
restart(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object allow perform soft reset of system by setting its
|
|
value to none zero. if a soft resetis performed, after this
|
|
having completed a warm start trap will send to declare the state
|
|
and when queried will always return 0."
|
|
::= { qtechSystemMIBObjects 7 }
|
|
|
|
qtechSwitchLayer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer2 (1), -- Layer 2 Switch
|
|
layer3 (2), -- Layer 3 Switch
|
|
router(3) -- Router
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Which layer's device the switch in system "
|
|
::= { qtechSystemMIBObjects 8 }
|
|
|
|
qtechSystemHwPower OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
rpsNoLink(1),
|
|
rpsLinkAndNoPower(2),
|
|
rpsLinkAndReadyForPower(3),
|
|
rpsLinkAndPower(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of power."
|
|
::= { qtechSystemMIBObjects 9 }
|
|
|
|
qtechSystemHwFan OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
work(1),
|
|
stop(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of fan."
|
|
::= { qtechSystemMIBObjects 10 }
|
|
|
|
--The qtechSystemOutBandTimeout is obsoleted after 2007.9
|
|
qtechSystemOutBandTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(0..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The timeout of console.0 indicate that timeout function is disabled."
|
|
::= { qtechSystemMIBObjects 11 }
|
|
|
|
--The qtechSystemTelnetTimeout is obsoleted after 2007.9
|
|
qtechSystemTelnetTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(0..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The timeout of telnet.0 indicate that timeout function is disabled."
|
|
::= { qtechSystemMIBObjects 12 }
|
|
|
|
qtechSystemMainFile OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the name of main file on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 13 }
|
|
|
|
qtechSystemCurrentPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the current power of the FastSwitch."
|
|
::= { qtechSystemMIBObjects 14 }
|
|
|
|
qtechSystemRemainPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the remain power of the FastSwitch."
|
|
::= { qtechSystemMIBObjects 15 }
|
|
|
|
qtechSystemTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the temperature of the FastSwitch."
|
|
::= { qtechSystemMIBObjects 16 }
|
|
|
|
qtechSystemElectricalSourceNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the electrical source number of the FastSwitch."
|
|
::= { qtechSystemMIBObjects 17 }
|
|
|
|
qtechSystemElectricalSourceIsNormalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemElectricalSourceIsNormalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of electrical source entries. Each object displays
|
|
whether different electrical sources are normal or not."
|
|
::= { qtechSystemMIBObjects 18 }
|
|
|
|
qtechSystemElectricalSourceIsNormalEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemElectricalSourceIsNormalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays whether different electrical sources are normal or not."
|
|
INDEX { qtechSystemElectricalSourceIsNormalIndex }
|
|
::= { qtechSystemElectricalSourceIsNormalTable 1 }
|
|
|
|
QtechSystemElectricalSourceIsNormalEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemElectricalSourceIsNormalIndex Integer32,
|
|
qtechSystemElectricalSourceIsNormal INTEGER,
|
|
qtechSystemElectricalSourceName DisplayString
|
|
}
|
|
|
|
qtechSystemElectricalSourceIsNormalIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a electrical source."
|
|
::= { qtechSystemElectricalSourceIsNormalEntry 1 }
|
|
|
|
qtechSystemElectricalSourceIsNormal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noexist (1), --no exist
|
|
existnopower (2), -- exist no power
|
|
existreadypower (3), --exist ready power
|
|
normal (4), --normal
|
|
powerbutabnormal (5), --power but abnormal
|
|
unknow (6) --unknow
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays whether an electrical source is normal or not."
|
|
::= { qtechSystemElectricalSourceIsNormalEntry 2 }
|
|
|
|
qtechSystemElectricalSourceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of electrical source"
|
|
::= { qtechSystemElectricalSourceIsNormalEntry 3 }
|
|
|
|
qtechSystemCurrentVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the current voltage of the FastSwitch."
|
|
::= { qtechSystemMIBObjects 19 }
|
|
|
|
qtechSystemFanNUM OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the number of fan on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 20 }
|
|
|
|
qtechSystemFanIsNormalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanIsNormalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan entries. Each object displays
|
|
whether different fans are normal or not."
|
|
::= { qtechSystemMIBObjects 21 }
|
|
|
|
qtechSystemFanIsNormalEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanIsNormalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays whether different fans are normal or not."
|
|
INDEX { qtechSystemFanIsNormalIndex }
|
|
::= { qtechSystemFanIsNormalTable 1 }
|
|
|
|
QtechSystemFanIsNormalEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemFanIsNormalIndex Integer32,
|
|
qtechSystemFanIsNormal INTEGER,
|
|
qtechSystemFanName DisplayString,
|
|
qtechSystemFanSpeed Integer32
|
|
}
|
|
|
|
qtechSystemFanIsNormalIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a fan."
|
|
::= { qtechSystemFanIsNormalEntry 1 }
|
|
|
|
qtechSystemFanIsNormal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noexist (1), --no exist
|
|
existnopower (2), -- exist no power
|
|
existreadypower (3), --exist ready power
|
|
normal (4), --normal
|
|
powerbutabnormal (5), --power but abnormal
|
|
unknow (6) --unknow
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays whether an fan is normal or not."
|
|
::= { qtechSystemFanIsNormalEntry 2 }
|
|
|
|
qtechSystemFanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of fan"
|
|
::= { qtechSystemFanIsNormalEntry 3 }
|
|
|
|
qtechSystemFanSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the fan's speed."
|
|
::= { qtechSystemFanIsNormalEntry 4 }
|
|
|
|
qtechSystemReloadTimeRemain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the remain time of reloading on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 22 }
|
|
|
|
qtechSystemTemperatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of temperature entries. Each object displays
|
|
the temperature information."
|
|
::= { qtechSystemMIBObjects 23 }
|
|
|
|
qtechSystemTemperatureEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the temperature information."
|
|
INDEX { qtechSystemTemperatureIndex }
|
|
::= { qtechSystemTemperatureTable 1 }
|
|
|
|
QtechSystemTemperatureEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemTemperatureIndex Integer32,
|
|
qtechSystemTemperatureName DisplayString,
|
|
qtechSystemTemperatureCurrent Integer32,
|
|
qtechSystemTemperatureWarningVaule Integer32,
|
|
qtechSystemTemperatureCritialVaule Integer32
|
|
}
|
|
|
|
qtechSystemTemperatureIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device's temperature information."
|
|
::= { qtechSystemTemperatureEntry 1 }
|
|
|
|
qtechSystemTemperatureName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name assigned to a temperature chip"
|
|
::= { qtechSystemTemperatureEntry 2 }
|
|
|
|
qtechSystemTemperatureCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the current temperature of the FastSwitch.The temperature display
|
|
is not supported for the current temperature returns to 0."
|
|
::= { qtechSystemTemperatureEntry 3 }
|
|
|
|
qtechSystemTemperatureWarningVaule OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first warning of temperature of the device CPU."
|
|
::= { qtechSystemTemperatureEntry 4 }
|
|
|
|
qtechSystemTemperatureCritialVaule OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second warning of temperature of the device CPU."
|
|
::= { qtechSystemTemperatureEntry 5 }
|
|
|
|
qtechSystemSerialno OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the serial number resides
|
|
on the FastSwitch."
|
|
::= { qtechSystemMIBObjects 24 }
|
|
|
|
qtechSystemVersionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemVersionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of system version entries. Each object displays
|
|
the system version information."
|
|
::= { qtechSystemMIBObjects 25 }
|
|
|
|
qtechSystemVersionEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemVersionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the system version information."
|
|
INDEX { qtechSystemVersionIndex }
|
|
::= { qtechSystemVersionTable 1 }
|
|
|
|
QtechSystemVersionEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemVersionIndex Unsigned32,
|
|
qtechSystemVersionName DisplayString,
|
|
qtechSystemVersionSwBoot DisplayString,
|
|
qtechSystemVersionSwCtrl DisplayString,
|
|
qtechSystemVersionSwMain DisplayString,
|
|
qtechSystemVersionHw DisplayString,
|
|
qtechSystemVersionSerialno DisplayString
|
|
}
|
|
|
|
qtechSystemVersionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device's system version information."
|
|
::= { qtechSystemVersionEntry 1 }
|
|
|
|
qtechSystemVersionName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name assigned to a system version chip"
|
|
::= { qtechSystemVersionEntry 2 }
|
|
|
|
qtechSystemVersionSwBoot OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software boot system version of the FastSwitch."
|
|
::= { qtechSystemVersionEntry 3 }
|
|
|
|
qtechSystemVersionSwCtrl OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software ctrl system version of the FastSwitch."
|
|
::= { qtechSystemVersionEntry 4 }
|
|
|
|
qtechSystemVersionSwMain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software main system version of the FastSwitch."
|
|
::= { qtechSystemVersionEntry 5 }
|
|
|
|
qtechSystemVersionHw OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the hardware system version of the FastSwitch."
|
|
::= { qtechSystemVersionEntry 6 }
|
|
|
|
qtechSystemVersionSerialno OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the serial number of the FastSwitch."
|
|
::= { qtechSystemVersionEntry 7 }
|
|
|
|
--System models added 2010-05
|
|
qtechSystemSysModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SysModel of equipment."
|
|
::={ qtechSystemMIBObjects 26 }
|
|
|
|
qtechSystemUptime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SysUptime of equipment,unit is seconds."
|
|
::={ qtechSystemMIBObjects 27 }
|
|
|
|
--System Sample Time 2010-05
|
|
qtechSystemSampleTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sampling duration."
|
|
::={ qtechSystemMIBObjects 28 }
|
|
|
|
qtechSystemStatWindowTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stating duration."
|
|
::={ qtechSystemMIBObjects 29 }
|
|
|
|
qtechSystemManufacturer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the manufacturer."
|
|
::= { qtechSystemMIBObjects 30 }
|
|
|
|
qtechSystemCurrentTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the current time of the system."
|
|
::= { qtechSystemMIBObjects 31 }
|
|
|
|
qtechSystemWarnResendTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the resending time of warn trap of the system."
|
|
::= { qtechSystemMIBObjects 32 }
|
|
|
|
qtechSystemSoftwareName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software name of the system."
|
|
::= { qtechSystemMIBObjects 33 }
|
|
|
|
qtechSystemSoftwareManufacturer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software manufacturer of the system."
|
|
::= { qtechSystemMIBObjects 34 }
|
|
|
|
qtechSystemCpuType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the cpu type infomation of the system."
|
|
::= { qtechSystemMIBObjects 35 }
|
|
|
|
qtechSystemMemoryType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the memory type of the system."
|
|
::= { qtechSystemMIBObjects 36 }
|
|
|
|
qtechSystemMemorySize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the memory card storage of the system."
|
|
::= { qtechSystemMIBObjects 37 }
|
|
|
|
qtechSystemFlashSize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the flash size of the system."
|
|
::= { qtechSystemMIBObjects 38 }
|
|
|
|
--lank ap 2010-7
|
|
qtechSystemLankApTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemLankApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of lank ap system entries. Each object displays
|
|
the lank ap system information."
|
|
::= { qtechSystemMIBObjects 39 }
|
|
|
|
qtechSystemLankApEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemLankApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the lank ap system information."
|
|
INDEX { qtechSystemLankApMacAddr }
|
|
::= { qtechSystemLankApTable 1 }
|
|
|
|
QtechSystemLankApEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemLankApMacAddr MacAddress,
|
|
qtechSystemLankApStatWindowTime Integer32,
|
|
qtechSystemLankApSampleTime Integer32,
|
|
qtechSystemLankApReset INTEGER,
|
|
qtechSystemLankApSoftwareName DisplayString,
|
|
qtechSystemLankApSwVersion DisplayString,
|
|
qtechSystemLankApSoftwareManufacturer DisplayString,
|
|
qtechSystemLankApCpuType DisplayString,
|
|
qtechSystemLankApMemoryType DisplayString,
|
|
qtechSystemLankApMemorySize Gauge,
|
|
qtechSystemLankAPFlashSize Gauge,
|
|
qtechSystemLankApManufacturer DisplayString,
|
|
qtechSystemLankApSerialno DisplayString,
|
|
qtechSystemLankApSysModel DisplayString,
|
|
qtechSystemLankApUptime INTEGER,
|
|
qtechSystemLankApAccurateUptime TimeTicks,
|
|
qtechSystemLankApHwVersion DisplayString
|
|
}
|
|
|
|
qtechSystemLankApMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents lank ap system information."
|
|
::= { qtechSystemLankApEntry 1 }
|
|
|
|
qtechSystemLankApStatWindowTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stating duration of lank ap."
|
|
::={ qtechSystemLankApEntry 2 }
|
|
|
|
qtechSystemLankApSampleTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sampling duration of lank ap."
|
|
::={ qtechSystemLankApEntry 3 }
|
|
|
|
qtechSystemLankApReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
restart(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object allow perform soft reset of lank ap system by setting
|
|
its value to none zero. if a soft resetis performed, after this
|
|
having completed a warm start trap will send to declare the state
|
|
and when queried will always return 0."
|
|
::= { qtechSystemLankApEntry 4 }
|
|
|
|
qtechSystemLankApSoftwareName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software name of the lank ap system."
|
|
::= { qtechSystemLankApEntry 5 }
|
|
|
|
qtechSystemLankApSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the Revision number of software resides
|
|
on the lank ap FastSwitch."
|
|
::= { qtechSystemLankApEntry 6 }
|
|
|
|
qtechSystemLankApSoftwareManufacturer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the software manufacturer of the lank ap system."
|
|
::= { qtechSystemLankApEntry 7 }
|
|
|
|
qtechSystemLankApCpuType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the cpu type infomation of the lank ap system."
|
|
::= { qtechSystemLankApEntry 8 }
|
|
|
|
qtechSystemLankApMemoryType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the memory type of the lank ap system."
|
|
::= { qtechSystemLankApEntry 9 }
|
|
|
|
qtechSystemLankApMemorySize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the memory card storage of the lank ap system."
|
|
::= { qtechSystemLankApEntry 10 }
|
|
|
|
qtechSystemLankAPFlashSize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the flash size of the lank ap system."
|
|
::= { qtechSystemLankApEntry 11 }
|
|
|
|
qtechSystemLankApManufacturer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the manufacturer of lank ap."
|
|
::= { qtechSystemLankApEntry 12}
|
|
|
|
qtechSystemLankApSerialno OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the serial number resides
|
|
on the lank ap FastSwitch."
|
|
::= { qtechSystemLankApEntry 13 }
|
|
|
|
qtechSystemLankApSysModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SysModel of lank ap equipment."
|
|
::={ qtechSystemLankApEntry 14 }
|
|
|
|
qtechSystemLankApUptime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SysUptime of lank ap equipment."
|
|
::={ qtechSystemLankApEntry 15 }
|
|
|
|
qtechSystemLankApAccurateUptime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the accurate system Uptime of ap equipment,unit is ticks"
|
|
::={ qtechSystemLankApEntry 16 }
|
|
|
|
qtechSystemLankApHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the string of the Revision number of hardware resides
|
|
on the lank ap FastSwitch."
|
|
::= { qtechSystemLankApEntry 17 }
|
|
|
|
|
|
qtechSystemBoardTemperatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemBoardTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of board temperature entries. Each object displays
|
|
the board temperature information."
|
|
::= { qtechSystemMIBObjects 40 }
|
|
|
|
qtechSystemBoardTemperatureEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemBoardTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the board temperature information."
|
|
INDEX { qtechSystemBoardTemperatureIndex }
|
|
::= { qtechSystemBoardTemperatureTable 1 }
|
|
|
|
QtechSystemBoardTemperatureEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemBoardTemperatureIndex Integer32,
|
|
qtechSystemBoardTemperatureName DisplayString,
|
|
qtechSystemBoardTemperatureCurrent Integer32
|
|
}
|
|
|
|
qtechSystemBoardTemperatureIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device's board temperature information."
|
|
::= { qtechSystemBoardTemperatureEntry 1 }
|
|
|
|
qtechSystemBoardTemperatureName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name assigned to a board temperature chip"
|
|
::= { qtechSystemBoardTemperatureEntry 2 }
|
|
|
|
qtechSystemBoardTemperatureCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the current board temperature of the FastSwitch.The temperature display
|
|
is not supported for the current temperature returns to 0."
|
|
::= { qtechSystemBoardTemperatureEntry 3 }
|
|
|
|
qtechSystemElectricalInformationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemElectricalInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of electrical entries. Each object displays the electrical information."
|
|
::= { qtechSystemMIBObjects 41 }
|
|
|
|
qtechSystemElectricalInformationEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemElectricalInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the electrical information."
|
|
INDEX {qtechSystemElectricalInformationDeviceIndex, qtechSystemElectricalInformationIndex }
|
|
::= { qtechSystemElectricalInformationTable 1 }
|
|
|
|
QtechSystemElectricalInformationEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemElectricalInformationDeviceIndex Integer32,
|
|
qtechSystemElectricalInformationIndex Integer32,
|
|
qtechSystemElectricalInformationStatus INTEGER,
|
|
qtechSystemElectricalInformationType DisplayString,
|
|
qtechSystemElectricalInformationAttribute DisplayString,
|
|
qtechSystemElectricalInformationSofeVersion DisplayString,
|
|
qtechSystemElectricalInformationHardwareVersion DisplayString,
|
|
qtechSystemElectricalInformationSerial DisplayString,
|
|
qtechSystemElectricalInformationProductionDate DisplayString,
|
|
qtechSystemElectricalInformationRatedPower Integer32,
|
|
qtechSystemElectricalInformationInVoltage Integer32,
|
|
qtechSystemElectricalInformationInCurrent Integer32,
|
|
qtechSystemElectricalInformationOutVoltage Integer32,
|
|
qtechSystemElectricalInformationOutCurrent Integer32,
|
|
qtechSystemElectricalInformationOutPower Integer32,
|
|
qtechSystemElectricalInformationTemperature Integer32,
|
|
qtechSystemElectricalInformationAirflowCoexist DisplayString,
|
|
qtechSystemElectricalInformationWarningStatus DisplayString
|
|
}
|
|
|
|
qtechSystemElectricalInformationDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device."
|
|
::= { qtechSystemElectricalInformationEntry 1 }
|
|
|
|
qtechSystemElectricalInformationIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a electriacl."
|
|
::= { qtechSystemElectricalInformationEntry 2 }
|
|
|
|
qtechSystemElectricalInformationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noexist (1), --no exist
|
|
existnopower (2), -- exist no power
|
|
existreadypower (3), --exist ready power
|
|
normal (4), --normal
|
|
powerbutabnormal (5), --power but abnormal
|
|
unknow (6) --unknow
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays whether an electrical source is normal or not.
|
|
If the electrical is no exist, the other of electrical information maybe
|
|
return nothing information and 0."
|
|
::= { qtechSystemElectricalInformationEntry 3 }
|
|
|
|
qtechSystemElectricalInformationType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the type of the electrical. If the device is no support this information,
|
|
This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 4 }
|
|
|
|
qtechSystemElectricalInformationAttribute OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays attribute of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 5 }
|
|
|
|
qtechSystemElectricalInformationSofeVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the sofe version of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 6}
|
|
|
|
qtechSystemElectricalInformationHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the hardware version of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 7 }
|
|
|
|
qtechSystemElectricalInformationSerial OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the serial of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 8 }
|
|
|
|
qtechSystemElectricalInformationProductionDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the productiron date of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 9 }
|
|
|
|
qtechSystemElectricalInformationRatedPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the rated power(Unit: W) of the electrical. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemElectricalInformationEntry 10 }
|
|
|
|
qtechSystemElectricalInformationInVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the input voltage(Unit: V) of the electrical. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemElectricalInformationEntry 11 }
|
|
|
|
qtechSystemElectricalInformationInCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the input current(Unit: mA) of the electrical. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemElectricalInformationEntry 12 }
|
|
|
|
qtechSystemElectricalInformationOutVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the output voltage(Unit: V) of the electrical. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemElectricalInformationEntry 13 }
|
|
|
|
qtechSystemElectricalInformationOutCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the output current(Unit: mA) of the electrical. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemElectricalInformationEntry 14 }
|
|
|
|
qtechSystemElectricalInformationOutPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the output power(Unit: W) of the electrical. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemElectricalInformationEntry 15 }
|
|
|
|
qtechSystemElectricalInformationTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the temperature(Unit: C) of the electrical. If the device is no support
|
|
this information, This object will return -255."
|
|
::= { qtechSystemElectricalInformationEntry 16 }
|
|
|
|
qtechSystemElectricalInformationAirflowCoexist OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the airflow coexist of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 17 }
|
|
|
|
qtechSystemElectricalInformationWarningStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the warning status of the electrical. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemElectricalInformationEntry 18 }
|
|
|
|
qtechSystemFanInformationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan entries. Each object displays the fan information."
|
|
::= { qtechSystemMIBObjects 42 }
|
|
|
|
qtechSystemFanInformationEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the fan information."
|
|
INDEX { qtechSystemFanInformationDeviceIndex , qtechSystemFanInformationFanIndex}
|
|
::= {qtechSystemFanInformationTable 1 }
|
|
|
|
QtechSystemFanInformationEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemFanInformationDeviceIndex Integer32,
|
|
qtechSystemFanInformationFanIndex Integer32,
|
|
qtechSystemFanInformationStatus INTEGER,
|
|
qtechSystemFanInformationType DisplayString,
|
|
qtechSystemFanInformationAttribute DisplayString,
|
|
qtechSystemFanInformationSofeVersion DisplayString,
|
|
qtechSystemFanInformationFirmwareVersion DisplayString,
|
|
qtechSystemFanInformationHardwareVersion DisplayString,
|
|
qtechSystemFanInformationSerial DisplayString,
|
|
qtechSystemFanInformationProductionDate DisplayString,
|
|
qtechSystemFanInformationTemperature Integer32,
|
|
qtechSystemFanInformationNumber Integer32,
|
|
qtechSystemFanInformationAirflowCoexist DisplayString,
|
|
qtechSystemFanInformationWarningStatus DisplayString
|
|
}
|
|
|
|
qtechSystemFanInformationDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device."
|
|
::= { qtechSystemFanInformationEntry 1 }
|
|
|
|
qtechSystemFanInformationFanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a fan device."
|
|
::= { qtechSystemFanInformationEntry 2 }
|
|
|
|
qtechSystemFanInformationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noexist (1), --no exist
|
|
existnopower (2), --exist no power
|
|
existreadypower (3), --exist ready power
|
|
normal (4), --normal
|
|
powerbutabnormal (5), --power but abnormal
|
|
unknow (6) --unknow
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays whether an fan device source is exist or not.
|
|
If the fan device is no exist, the other of fan information maybe
|
|
return nothing information and 0."
|
|
::= { qtechSystemFanInformationEntry 3 }
|
|
|
|
qtechSystemFanInformationType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the type of the fan. If the device is no support this information,
|
|
This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 4 }
|
|
|
|
qtechSystemFanInformationAttribute OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays attribute of the fan. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 5 }
|
|
|
|
qtechSystemFanInformationSofeVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the sofe version of the fan. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 6}
|
|
|
|
qtechSystemFanInformationFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the firmware version of the fan. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 7 }
|
|
|
|
qtechSystemFanInformationHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the hardware version of the fan. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 8 }
|
|
|
|
qtechSystemFanInformationSerial OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the serial of the fan. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 9 }
|
|
|
|
qtechSystemFanInformationProductionDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the productiron date of the fan. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 10 }
|
|
|
|
qtechSystemFanInformationTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the temperature of the fan device. If the device is no support
|
|
this information, This object will return -255."
|
|
::= { qtechSystemFanInformationEntry 11 }
|
|
|
|
qtechSystemFanInformationNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the number of the fan device. If the device is no support
|
|
this information, This object will return 0."
|
|
::= { qtechSystemFanInformationEntry 12 }
|
|
|
|
qtechSystemFanInformationAirflowCoexist OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the airflow coexist of the fan device. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 13 }
|
|
|
|
qtechSystemFanInformationWarningStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the warning status of the fan device. If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanInformationEntry 14 }
|
|
|
|
qtechSystemFanStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan status entries. Each object displays the fan status information."
|
|
::= { qtechSystemMIBObjects 43 }
|
|
|
|
qtechSystemFanStatusEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the fan status information."
|
|
INDEX { qtechSystemFanStatusDeviceIndex,
|
|
qtechSystemFanStatusFanIndex,
|
|
qtechSystemFanStatusIndex }
|
|
::= {qtechSystemFanStatusTable 1 }
|
|
|
|
QtechSystemFanStatusEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemFanStatusDeviceIndex Integer32,
|
|
qtechSystemFanStatusFanIndex Integer32,
|
|
qtechSystemFanStatusIndex Integer32,
|
|
qtechSystemFanStatus INTEGER,
|
|
qtechSystemFanStatusLevel Integer32,
|
|
qtechSystemFanStatusSpeed Integer32
|
|
}
|
|
|
|
qtechSystemFanStatusDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device."
|
|
::= { qtechSystemFanStatusEntry 1 }
|
|
|
|
qtechSystemFanStatusFanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a fan device."
|
|
::= { qtechSystemFanStatusEntry 2 }
|
|
|
|
qtechSystemFanStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a fan."
|
|
::= { qtechSystemFanStatusEntry 3 }
|
|
|
|
qtechSystemFanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noexist (1), --no exist
|
|
existnopower (2), --exist no power
|
|
existreadypower (3), --exist ready power
|
|
normal (4), --normal
|
|
powerbutabnormal (5), --power but abnormal
|
|
unknow (6) --unknow
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays whether an fan is normal or not."
|
|
::= { qtechSystemFanStatusEntry 4 }
|
|
|
|
qtechSystemFanStatusLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the level of the fan speed. If the device is no support this information,
|
|
This object will return 0."
|
|
::= { qtechSystemFanStatusEntry 5 }
|
|
|
|
qtechSystemFanStatusSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays fan speed(rpm). If the device is no support
|
|
this information, This object will return nothing information."
|
|
::= { qtechSystemFanStatusEntry 6 }
|
|
|
|
qtechSystemMultipleTemperatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemMultipleTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of multiple temperature entries. Each object displays
|
|
the multiple temperature information."
|
|
::= { qtechSystemMIBObjects 44 }
|
|
|
|
qtechSystemMultipleTemperatureEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemMultipleTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the multiple temperature information."
|
|
INDEX { qtechSystemMultipleTemperatureDeviceIndex,
|
|
qtechSystemMultipleTemperatureSlotIndex,
|
|
qtechSystemMultipleTemperatureIndex }
|
|
::= { qtechSystemMultipleTemperatureTable 1 }
|
|
|
|
QtechSystemMultipleTemperatureEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemMultipleTemperatureDeviceIndex Integer32,
|
|
qtechSystemMultipleTemperatureSlotIndex Integer32,
|
|
qtechSystemMultipleTemperatureIndex Integer32,
|
|
qtechSystemMultipleTemperatureName DisplayString,
|
|
qtechSystemMultipleTemperatureCurrent Integer32,
|
|
qtechSystemMultipleTemperatureWarning Integer32,
|
|
qtechSystemMultipleTemperatureCritical Integer32
|
|
}
|
|
|
|
qtechSystemMultipleTemperatureDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device."
|
|
::= { qtechSystemMultipleTemperatureEntry 1 }
|
|
|
|
qtechSystemMultipleTemperatureSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a slot device."
|
|
::= { qtechSystemMultipleTemperatureEntry 2 }
|
|
|
|
qtechSystemMultipleTemperatureIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents a device's multiple temperature information."
|
|
::= { qtechSystemMultipleTemperatureEntry 3 }
|
|
|
|
qtechSystemMultipleTemperatureName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name assigned to a multiple temperature chip"
|
|
::= { qtechSystemMultipleTemperatureEntry 4 }
|
|
|
|
qtechSystemMultipleTemperatureCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the current multiple temperature of the FastSwitch.The temperature display
|
|
is not supported for the current temperature returns to -255."
|
|
::= { qtechSystemMultipleTemperatureEntry 5 }
|
|
|
|
qtechSystemMultipleTemperatureWarning OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the warning multiple temperature of the FastSwitch.The temperature display
|
|
is not supported for the warning temperature returns to -255."
|
|
::= { qtechSystemMultipleTemperatureEntry 6 }
|
|
|
|
qtechSystemMultipleTemperatureCritical OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the critical multiple temperature of the FastSwitch.The temperature display
|
|
is not supported for the critical temperature returns to -255."
|
|
::= { qtechSystemMultipleTemperatureEntry 7 }
|
|
|
|
qtechSystemAccurateUptime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the accurate system Uptime of equipment,unit is ticks."
|
|
::={ qtechSystemMIBObjects 45 }
|
|
|
|
qtechSystemPowerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of power"
|
|
::= { qtechSystemMIBObjects 46 }
|
|
|
|
qtechSystemSwitchID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch id in VSU"
|
|
::= { qtechSystemMIBObjects 47 }
|
|
|
|
qtechSystemApDeviceDescriptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemApDeviceDescriptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of lank ap system entries. Each object displays
|
|
the lank ap system information."
|
|
::= { qtechSystemMIBObjects 48 }
|
|
|
|
qtechSystemApDeviceDescriptionEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemApDeviceDescriptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the ap Device Description."
|
|
INDEX { qtechSystemApDescMacAddr }
|
|
::= { qtechSystemApDeviceDescriptionTable 1 }
|
|
|
|
QtechSystemApDeviceDescriptionEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemApDescMacAddr MacAddress,
|
|
qtechSystemApMemoryType INTEGER,
|
|
qtechSystemApMemorySize Gauge,
|
|
qtechSystemAPFlashType INTEGER,
|
|
qtechSystemAPFlashSize Gauge,
|
|
qtechSystemApNVRAMSize Gauge,
|
|
qtechSystemApCFSize Gauge,
|
|
qtechSystemApCPUType DisplayString
|
|
}
|
|
|
|
qtechSystemApDescMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents ap system information."
|
|
::= { qtechSystemApDeviceDescriptionEntry 1 }
|
|
|
|
qtechSystemApMemoryType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(0),
|
|
sdram(1),
|
|
ddram(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the memory type of the lank ap system."
|
|
::= { qtechSystemApDeviceDescriptionEntry 2 }
|
|
|
|
qtechSystemApMemorySize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the memory card storage of the lank ap system, unit is MB."
|
|
::= { qtechSystemApDeviceDescriptionEntry 3 }
|
|
|
|
qtechSystemAPFlashType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(0),
|
|
nor(1),
|
|
non-nor(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents ap system information."
|
|
::= { qtechSystemApDeviceDescriptionEntry 4 }
|
|
|
|
qtechSystemAPFlashSize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the flash size of the lank ap system, unit is MB."
|
|
::= { qtechSystemApDeviceDescriptionEntry 5 }
|
|
|
|
qtechSystemApNVRAMSize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the NVRAM size of the lank ap system, unit is MB."
|
|
::= { qtechSystemApDeviceDescriptionEntry 6 }
|
|
|
|
qtechSystemApCFSize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the CF size of the lank ap system, unit is MB."
|
|
::= { qtechSystemApDeviceDescriptionEntry 7 }
|
|
|
|
qtechSystemApCPUType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the cpu type of the lank ap system."
|
|
::= { qtechSystemApDeviceDescriptionEntry 8 }
|
|
|
|
qtechSystemApDeviceStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemApDeviceStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of lank ap system entries. Each object displays
|
|
the lank ap system information."
|
|
::= { qtechSystemMIBObjects 49 }
|
|
|
|
qtechSystemApDeviceStatisticsEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemApDeviceStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays the ap Device Statistics."
|
|
INDEX { qtechSystemApStatMacAddr }
|
|
::= { qtechSystemApDeviceStatisticsTable 1 }
|
|
|
|
QtechSystemApDeviceStatisticsEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemApStatMacAddr MacAddress,
|
|
qtechSystemApInterfaceNum Integer32,
|
|
qtechSystemApUptime TimeTicks,
|
|
qtechSystemApCPUUtilizationCurrent Percent,
|
|
qtechSystemApCPUUtilizationAverage Percent,
|
|
qtechSystemApMemoryPoolCurrentUtilization Percent,
|
|
qtechSystemApMemoryPoolAverageUtilization Percent,
|
|
qtechSystemApFlashFreeSize Unsigned32,
|
|
qtechSystemAPDeviceTemperature Integer32
|
|
}
|
|
|
|
qtechSystemApStatMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely represents ap system information."
|
|
::= { qtechSystemApDeviceStatisticsEntry 1 }
|
|
|
|
qtechSystemApInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the interface number of the lank ap system."
|
|
::= { qtechSystemApDeviceStatisticsEntry 2 }
|
|
|
|
qtechSystemApUptime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SysUptime of lank ap equipment, unit is ticks."
|
|
::= { qtechSystemApDeviceStatisticsEntry 3 }
|
|
|
|
qtechSystemApCPUUtilizationCurrent OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the collection of current lank ap cpu using rate."
|
|
::= { qtechSystemApDeviceStatisticsEntry 4 }
|
|
|
|
qtechSystemApCPUUtilizationAverage OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the average cpu using rate currently."
|
|
::= { qtechSystemApDeviceStatisticsEntry 5 }
|
|
|
|
qtechSystemApMemoryPoolCurrentUtilization OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the memory pool utilization currently."
|
|
::= { qtechSystemApDeviceStatisticsEntry 6 }
|
|
|
|
qtechSystemApMemoryPoolAverageUtilization OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the average memory pool utilization currently."
|
|
::= { qtechSystemApDeviceStatisticsEntry 7 }
|
|
|
|
qtechSystemApFlashFreeSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the free size of the flash device, unit is MB."
|
|
::= { qtechSystemApDeviceStatisticsEntry 8 }
|
|
|
|
qtechSystemAPDeviceTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the temperature of the ap.But the ap is no support
|
|
this information, so it will return 35 in perpetuity"
|
|
::= { qtechSystemApDeviceStatisticsEntry 9 }
|
|
|
|
qtechSystemUptimeMsLow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the equipment SysUptime Low 32-bit,unit is tick."
|
|
::={ qtechSystemMIBObjects 50 }
|
|
|
|
qtechSystemUptimeMsHigh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the equipment SysUptime High 32-bit,unit is tick."
|
|
::={ qtechSystemMIBObjects 51 }
|
|
|
|
qtechSystemFanSNTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanSNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan's serial number"
|
|
::= { qtechSystemMIBObjects 52 }
|
|
|
|
qtechSystemFanSNEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanSNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays fan SN."
|
|
INDEX { qtechSystemFanPadIndex }
|
|
::= { qtechSystemFanSNTable 1 }
|
|
|
|
QtechSystemFanSNEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemFanPadIndex Integer32,
|
|
qtechSystemFanPadName DisplayString,
|
|
qtechSystemFanPadSN DisplayString
|
|
}
|
|
|
|
qtechSystemFanPadIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the index of the fan pad."
|
|
::= { qtechSystemFanSNEntry 1 }
|
|
|
|
qtechSystemFanPadName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the name of the fan pad."
|
|
::= { qtechSystemFanSNEntry 2 }
|
|
|
|
qtechSystemFanPadSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SN of the fan pad."
|
|
::= { qtechSystemFanSNEntry 3 }
|
|
|
|
qtechSystemDsfSNTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemDsfSNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of dsf's serial number"
|
|
::= { qtechSystemMIBObjects 53 }
|
|
|
|
qtechSystemDsfSNEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemDsfSNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays dsf SN."
|
|
INDEX { qtechSystemDsfIndex }
|
|
::= { qtechSystemDsfSNTable 1 }
|
|
|
|
QtechSystemDsfSNEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemDsfIndex Integer32,
|
|
qtechSystemDsfName DisplayString,
|
|
qtechSystemDsfSN DisplayString
|
|
}
|
|
|
|
qtechSystemDsfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the index of the dsf."
|
|
::= { qtechSystemDsfSNEntry 1 }
|
|
|
|
qtechSystemDsfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the name of the dsf."
|
|
::= { qtechSystemDsfSNEntry 2 }
|
|
|
|
qtechSystemDsfSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SN of the dsf."
|
|
::= { qtechSystemDsfSNEntry 3 }
|
|
|
|
qtechSystemPowerSNTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemPowerSNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of power's serial number"
|
|
::= { qtechSystemMIBObjects 54 }
|
|
|
|
qtechSystemPowerSNEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemPowerSNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays power SN."
|
|
INDEX { qtechSystemPowerSNIndex }
|
|
::= { qtechSystemPowerSNTable 1 }
|
|
|
|
QtechSystemPowerSNEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemPowerSNIndex Integer32,
|
|
qtechSystemPowerSNName DisplayString,
|
|
qtechSystemPowerSN DisplayString
|
|
}
|
|
|
|
qtechSystemPowerSNIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the index of the power."
|
|
::= { qtechSystemPowerSNEntry 1 }
|
|
|
|
qtechSystemPowerSNName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the name of the power."
|
|
::= { qtechSystemPowerSNEntry 2 }
|
|
|
|
qtechSystemPowerSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the SN of the power."
|
|
::= { qtechSystemPowerSNEntry 3 }
|
|
|
|
qtechSystemFanPad1SpeedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanPad1SpeedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan's speed on fan pad1."
|
|
::= { qtechSystemMIBObjects 55 }
|
|
|
|
qtechSystemFanPad1SpeedEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanPad1SpeedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays fan's speed on same fan pad"
|
|
INDEX { qtechSystemOamFanPad1Index }
|
|
::= { qtechSystemFanPad1SpeedTable 1 }
|
|
|
|
QtechSystemFanPad1SpeedEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemOamFanPad1Index Integer32,
|
|
qtechSystemOamFanPad1Name DisplayString,
|
|
qtechSystemFanPad1Speed1 Integer32,
|
|
qtechSystemFanPad1Speed2 Integer32,
|
|
qtechSystemFanPad1Speed3 Integer32,
|
|
qtechSystemFanPad1Speed4 Integer32,
|
|
qtechSystemFanPad1Speed5 Integer32,
|
|
qtechSystemFanPad1Speed6 Integer32,
|
|
qtechSystemFanPad1Speed7 Integer32,
|
|
qtechSystemFanPad1Speed8 Integer32,
|
|
qtechSystemFanPad1Speed9 Integer32
|
|
}
|
|
|
|
qtechSystemOamFanPad1Index OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the index of the fan pad."
|
|
::= { qtechSystemFanPad1SpeedEntry 1 }
|
|
|
|
qtechSystemOamFanPad1Name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the name of the fan pad."
|
|
::= { qtechSystemFanPad1SpeedEntry 2 }
|
|
|
|
qtechSystemFanPad1Speed1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan1."
|
|
::= { qtechSystemFanPad1SpeedEntry 3 }
|
|
|
|
qtechSystemFanPad1Speed2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan2."
|
|
::= { qtechSystemFanPad1SpeedEntry 4 }
|
|
|
|
qtechSystemFanPad1Speed3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan3."
|
|
::= { qtechSystemFanPad1SpeedEntry 5 }
|
|
|
|
qtechSystemFanPad1Speed4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan4."
|
|
::= { qtechSystemFanPad1SpeedEntry 6 }
|
|
|
|
qtechSystemFanPad1Speed5 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan5."
|
|
::= { qtechSystemFanPad1SpeedEntry 7 }
|
|
|
|
qtechSystemFanPad1Speed6 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan6."
|
|
::= { qtechSystemFanPad1SpeedEntry 8 }
|
|
|
|
qtechSystemFanPad1Speed7 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan7."
|
|
::= { qtechSystemFanPad1SpeedEntry 9 }
|
|
|
|
qtechSystemFanPad1Speed8 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan8."
|
|
::= { qtechSystemFanPad1SpeedEntry 10 }
|
|
|
|
qtechSystemFanPad1Speed9 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan9."
|
|
::= { qtechSystemFanPad1SpeedEntry 11 }
|
|
|
|
qtechSystemFanPad2SpeedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanPad2SpeedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan's speed on fan pad2."
|
|
::= { qtechSystemMIBObjects 56 }
|
|
|
|
qtechSystemFanPad2SpeedEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanPad2SpeedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays fan's speed on same fan pad2"
|
|
INDEX { qtechSystemOamFanPad2Index }
|
|
::= { qtechSystemFanPad2SpeedTable 1 }
|
|
|
|
QtechSystemFanPad2SpeedEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemOamFanPad2Index Integer32,
|
|
qtechSystemOamFanPad2Name DisplayString,
|
|
qtechSystemFanPad2Speed1 Integer32,
|
|
qtechSystemFanPad2Speed2 Integer32,
|
|
qtechSystemFanPad2Speed3 Integer32,
|
|
}
|
|
|
|
qtechSystemOamFanPad2Index OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the index of the fan pad2."
|
|
::= { qtechSystemFanPad2SpeedEntry 1 }
|
|
|
|
qtechSystemOamFanPad2Name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the name of the fan pad."
|
|
::= { qtechSystemFanPad2SpeedEntry 2 }
|
|
|
|
qtechSystemFanPad2Speed1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan1."
|
|
::= { qtechSystemFanPad2SpeedEntry 3 }
|
|
|
|
qtechSystemFanPad2Speed2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan2."
|
|
::= { qtechSystemFanPad2SpeedEntry 4 }
|
|
|
|
qtechSystemFanPad2Speed3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan3."
|
|
::= { qtechSystemFanPad2SpeedEntry 5 }
|
|
|
|
qtechSystemFanPad3SpeedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechSystemFanPad3SpeedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of fan's speed on fan pad3."
|
|
::= { qtechSystemMIBObjects 57 }
|
|
|
|
qtechSystemFanPad3SpeedEntry OBJECT-TYPE
|
|
SYNTAX QtechSystemFanPad3SpeedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry displays fan's speed on same fan pad3"
|
|
INDEX { qtechSystemOamFanPad3Index }
|
|
::= { qtechSystemFanPad3SpeedTable 1 }
|
|
|
|
QtechSystemFanPad3SpeedEntry ::=
|
|
SEQUENCE {
|
|
qtechSystemOamFanPad3Index Integer32,
|
|
qtechSystemOamFanPad3Name DisplayString,
|
|
qtechSystemFanPad3Speed1 Integer32,
|
|
qtechSystemFanPad3Speed2 Integer32,
|
|
qtechSystemFanPad3Speed3 Integer32,
|
|
qtechSystemFanPad3Speed4 Integer32,
|
|
qtechSystemFanPad3Speed5 Integer32,
|
|
}
|
|
|
|
qtechSystemOamFanPad3Index OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the index of the fan pad3."
|
|
::= { qtechSystemFanPad3SpeedEntry 1 }
|
|
|
|
qtechSystemOamFanPad3Name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the name of the fan pad."
|
|
::= { qtechSystemFanPad3SpeedEntry 2 }
|
|
|
|
qtechSystemFanPad3Speed1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan1."
|
|
::= { qtechSystemFanPad3SpeedEntry 3 }
|
|
|
|
qtechSystemFanPad3Speed2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan2."
|
|
::= { qtechSystemFanPad3SpeedEntry 4 }
|
|
|
|
qtechSystemFanPad3Speed3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan3."
|
|
::= { qtechSystemFanPad3SpeedEntry 5 }
|
|
|
|
qtechSystemFanPad3Speed4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan4."
|
|
::= { qtechSystemFanPad3SpeedEntry 6 }
|
|
|
|
qtechSystemFanPad3Speed5 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the speed of the fan5."
|
|
::= { qtechSystemFanPad3SpeedEntry 7 }
|
|
|
|
qtechSystemMIBTraps OBJECT IDENTIFIER ::= { qtechSystemMIB 2 }
|
|
|
|
qtechSystemHardChangeDesc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of hard change"
|
|
::= { qtechSystemMIBTraps 1 }
|
|
|
|
qtechSystemHardChangeDetected NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemHardChangeDesc}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System hardware has changed include number of devices or number of modules
|
|
or the place or type of the module is change."
|
|
::= { qtechSystemMIBTraps 2 }
|
|
|
|
qtechSystemPowerStateChange NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemHwPower}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"while the state of power changed, then this trap will be sent."
|
|
::= { qtechSystemMIBTraps 3 }
|
|
|
|
qtechSystemFanStateChange NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemHwFan}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"while the state of fan changed, then this trap will be sent."
|
|
::= { qtechSystemMIBTraps 4 }
|
|
|
|
--2010-05
|
|
qtechSystemCPUusageTooHighTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechCPUUtilization1Min}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU usage Too High warning."
|
|
::= { qtechSystemMIBTraps 5 }
|
|
|
|
--2010-05
|
|
qtechSystemCPUusageTooHighRecovTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechCPUUtilization1Min}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of CPU usage too high and report the current CPU usage."
|
|
::= { qtechSystemMIBTraps 6 }
|
|
|
|
--2010-05
|
|
qtechSystemTmpTooHighTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemTemperatureCurrent}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature Too High warning."
|
|
::= { qtechSystemMIBTraps 7 }
|
|
|
|
--Temperature Too High Recover Trap 2010-05
|
|
qtechSystemTmpTooHighRecovTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemTemperatureCurrent}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of temperature too high and report the current temperature."
|
|
::= { qtechSystemMIBTraps 8 }
|
|
|
|
--Memory usage too high trap 2010-05
|
|
qtechSystemMemusageTooHighTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechMemoryPoolCurrentUtilization}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Memory usage too high warning."
|
|
::= { qtechSystemMIBTraps 9 }
|
|
|
|
--Memory usage too high recover trap 2010-05
|
|
qtechSystemMemusageTooHighRecovTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechMemoryPoolCurrentUtilization}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of Memory usage too high and report the current Memory usage."
|
|
::= { qtechSystemMIBTraps 10 }
|
|
|
|
--lank ap 2010-7
|
|
qtechSystemLankApCPUusageTooHighTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechApMacAddr,
|
|
qtechCPUUtilization1Min
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"lank ap CPU usage Too High warning."
|
|
::= { qtechSystemMIBTraps 11 }
|
|
|
|
--lank ap 2010-7
|
|
qtechSystemLankApCPUusageTooHighRecovTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechApMacAddr,
|
|
qtechCPUUtilization1Min
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of lank ap CPU usage too high and report the current CPU usage."
|
|
::= { qtechSystemMIBTraps 12 }
|
|
|
|
--lank ap 2010-7
|
|
qtechSystemLankApMemusageTooHighTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechApMacAddr,
|
|
qtechMemoryPoolCurrentUtilization
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"lank ap Memory usage too high warning."
|
|
::= { qtechSystemMIBTraps 13 }
|
|
|
|
--lank ap 2010-7
|
|
qtechSystemLankApMemusageTooHighRecovTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechApMacAddr,
|
|
qtechMemoryPoolCurrentUtilization
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of lank ap Memory usage too high and report the current Memory usage."
|
|
::= { qtechSystemMIBTraps 14 }
|
|
|
|
--System reset trap 2010-7
|
|
qtechSystemResetTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"send a trap while system reset"
|
|
::= { qtechSystemMIBTraps 15 }
|
|
|
|
--lank ap reset trap 2010-8
|
|
qtechSystemLankApResetTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechApMacAddr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"send a trap while lank ap system reset"
|
|
::= { qtechSystemMIBTraps 16 }
|
|
|
|
qtechSystemPowerOnTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemPowerIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"send a trap while power on."
|
|
::= { qtechSystemMIBTraps 17 }
|
|
|
|
qtechSystemPowerOffTrap NOTIFICATION-TYPE
|
|
OBJECTS {qtechSystemPowerIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"send a trap while power off."
|
|
::= { qtechSystemMIBTraps 18 }
|
|
|
|
qtechSystemPowerOnTrapInVSU NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemSwitchID,
|
|
qtechSystemPowerIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"send a trap while power on in VSU."
|
|
::= { qtechSystemMIBTraps 19 }
|
|
|
|
qtechSystemPowerOffTrapInVSU NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemSwitchID,
|
|
qtechSystemPowerIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"send a trap while power off in VSU."
|
|
::= { qtechSystemMIBTraps 20 }
|
|
|
|
qtechSystemTmpTableTooHighTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemMultipleTemperatureSlotIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature Too High warning with the slot index."
|
|
::= { qtechSystemMIBTraps 21 }
|
|
|
|
qtechSystemTmpTableTooHighRecovTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemMultipleTemperatureSlotIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of Temperature too high with the slot index."
|
|
::= { qtechSystemMIBTraps 22 }
|
|
|
|
qtechSystemTmpTableTooHighTrapVSU NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemMultipleTemperatureDeviceIndex,
|
|
qtechSystemMultipleTemperatureSlotIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature Too High warning with the slot index in VSU."
|
|
::= { qtechSystemMIBTraps 23 }
|
|
|
|
qtechSystemTmpTableTooHighRecovTrapVSU NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemMultipleTemperatureDeviceIndex,
|
|
qtechSystemMultipleTemperatureSlotIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear the warning of Temperature too high with the slot index."
|
|
::= { qtechSystemMIBTraps 24 }
|
|
|
|
qtechSystemFanTableStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemFanStatusFanIndex,
|
|
qtechSystemFanStatusIndex,
|
|
qtechSystemFanStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"while the state of fan changed, then this trap will be sent."
|
|
::= { qtechSystemMIBTraps 25 }
|
|
|
|
qtechSystemFanTableStateChangeVSU NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechSystemFanStatusDeviceIndex,
|
|
qtechSystemFanStatusFanIndex,
|
|
qtechSystemFanStatusIndex,
|
|
qtechSystemFanStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In VSU, while the state of fan changed, then this trap will be sent."
|
|
::= { qtechSystemMIBTraps 26 }
|
|
|
|
qtechSystemMIBConformance OBJECT IDENTIFIER ::= { qtechSystemMIB 3 }
|
|
qtechSystemMIBCompliances OBJECT IDENTIFIER ::= { qtechSystemMIBConformance 1 }
|
|
qtechSystemMIBGroups OBJECT IDENTIFIER ::= { qtechSystemMIBConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
qtechSystemMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Qtech System MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { qtechSystemMIBGroup
|
|
}
|
|
::= { qtechSystemMIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
qtechSystemMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qtechSystemHwVersion,
|
|
qtechSystemSwVersion,
|
|
qtechSystemBootVersion,
|
|
qtechSystemSysCtrlVersion,
|
|
qtechSystemParametersSave,
|
|
qtechSystemReset,
|
|
qtechSystemOutBandRate,
|
|
qtechSwitchLayer
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing system information and
|
|
opertion to a Qtech agent."
|
|
::= { qtechSystemMIBGroups 1 }
|
|
|
|
END
|