1352 lines
40 KiB
Plaintext
1352 lines
40 KiB
Plaintext
LUM-PW-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter64
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
DisplayString, DateAndTime, RowStatus
|
|
FROM SNMPv2-TC
|
|
lumModules, lumPwMIB
|
|
FROM LUM-REG
|
|
MplsLabel, PortNumber
|
|
FROM LUM-TC
|
|
MgmtNameString, CommandString
|
|
FROM LUM-TC;
|
|
|
|
lumPwMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201706150000Z" -- June 15th 2017
|
|
ORGANIZATION
|
|
"Infinera Corporation"
|
|
CONTACT-INFO
|
|
"techsupport@infinera.com"
|
|
DESCRIPTION
|
|
"The MIB module for management of Pseudowires.
|
|
|
|
The tables contained in this MIB are:
|
|
|
|
(1) The General group contains some general attributes as time stamps
|
|
and tables sizes.
|
|
|
|
(2) The generic table contains generic information and configuration
|
|
applicable to all types of pseudowires. All created pseudowires
|
|
will be represented by an entry in this table.
|
|
|
|
(3) The MPLS table contains MPLS specific information and
|
|
configuration. A pseudowire configured to run over a MPLS packet switched
|
|
network will be represented by an entry in this table.
|
|
|
|
(4) The Ethernet table contains specific information and configuration
|
|
for all pseudowires configured to carry Ethernet traffic. An
|
|
Ethernet pseudowire will be represented by one entry in this table.
|
|
|
|
(5) The multi-segment pseudowire table contains specific information
|
|
and configuration for all multi-segment pseudowires. A multi-segment
|
|
pseudowire will be represented by on entry in this table.
|
|
|
|
Generic table is used for all pseudowires. MPLS table and Ethernet table are
|
|
only used for edge pseudowire, while multi-segment table is specifically used
|
|
for multi-segment pseudowire.
|
|
"
|
|
REVISION
|
|
"201706150000Z" -- June 15th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r29.0:
|
|
- Changed ORGANIZATION and CONTACT-INFO"
|
|
REVISION
|
|
"201611300000Z" -- November 30th 2016
|
|
DESCRIPTION
|
|
"Changes made for release r28.0:
|
|
- Added pwEnetIfNo, pwEnetTxPort, pwEnetInterfaceName, pwGenericPwNumber, pwGenericConfigurationSet
|
|
- Added pwGenericFlowLabel"
|
|
REVISION
|
|
"201212200000Z" -- December 20th 2012
|
|
DESCRIPTION
|
|
"- Added multi-segment pseudowire table.
|
|
- Added classification object to enet pseudowire.
|
|
- Added traffic class to pseudowire"
|
|
REVISION
|
|
"201112200000Z" -- December 20th 2011
|
|
DESCRIPTION
|
|
"The initial revision of this module."
|
|
::= { lumModules 41 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Conformance area, containing groups and compliance
|
|
-- specifications.
|
|
-- ----------------------------------------------------
|
|
|
|
lumPwConfs OBJECT IDENTIFIER ::= { lumPwMIB 1 }
|
|
lumPwGroups OBJECT IDENTIFIER ::= { lumPwConfs 1 }
|
|
lumPwCompl OBJECT IDENTIFIER ::= { lumPwConfs 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Root for objects in the pw MIB
|
|
-- ----------------------------------------------------
|
|
|
|
lumPwMIBObjects OBJECT IDENTIFIER ::= { lumPwMIB 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- This MIB contains the following groups:
|
|
-- ----------------------------------------------------
|
|
|
|
pwGeneral OBJECT IDENTIFIER ::= { lumPwMIBObjects 1 }
|
|
pwGenericList OBJECT IDENTIFIER ::= { lumPwMIBObjects 2 }
|
|
pwMplsList OBJECT IDENTIFIER ::= { lumPwMIBObjects 3 }
|
|
pwEnetList OBJECT IDENTIFIER ::= { lumPwMIBObjects 4 }
|
|
pwMspwList OBJECT IDENTIFIER ::= { lumPwMIBObjects 5 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Textual Conventions
|
|
-- ----------------------------------------------------
|
|
|
|
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- General group
|
|
-- ----------------------------------------------------
|
|
|
|
pwGeneralLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the MIB was
|
|
last changed.
|
|
"
|
|
::= { pwGeneral 1 }
|
|
|
|
pwGeneralStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state of the MIB was last
|
|
changed.
|
|
"
|
|
::= { pwGeneral 2 }
|
|
|
|
pwGeneralPwGenericTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of generic pseudowire table
|
|
"
|
|
::= { pwGeneral 3 }
|
|
|
|
pwGeneralPwMplsTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of MPLS pseudowire table
|
|
"
|
|
::= { pwGeneral 4 }
|
|
|
|
pwGeneralPwEnetTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of Ethernet pseudowire table
|
|
"
|
|
::= { pwGeneral 5 }
|
|
|
|
pwGeneralPwMspwTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of multi-segment pseudowire table
|
|
"
|
|
::= { pwGeneral 6 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Generic PW table
|
|
-- ----------------------------------------------------
|
|
|
|
pwGenericTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwGenericEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The generic pseudowire list."
|
|
::= { pwGenericList 1 }
|
|
|
|
pwGenericEntry OBJECT-TYPE
|
|
SYNTAX PwGenericEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the generic pseudowire list.
|
|
Each entry represents a pseudowire.
|
|
"
|
|
INDEX { pwGenericIndex }
|
|
::= { pwGenericTable 1 }
|
|
|
|
PwGenericEntry ::=
|
|
SEQUENCE {
|
|
pwGenericIndex Unsigned32,
|
|
pwGenericName MgmtNameString,
|
|
pwGenericIdentifier DisplayString,
|
|
pwGenericInternalReference Unsigned32,
|
|
pwGenericDescr DisplayString,
|
|
pwGenericOutboundLabel MplsLabel,
|
|
pwGenericInboundLabel MplsLabel,
|
|
pwGenericInPackets Counter64,
|
|
pwGenericInBytes Counter64,
|
|
pwGenericOutPackets Counter64,
|
|
pwGenericOutBytes Counter64,
|
|
pwGenericResetCont INTEGER,
|
|
pwGenericRowStatus RowStatus,
|
|
pwGenericPwType INTEGER,
|
|
pwGenericTrafficClass INTEGER,
|
|
pwGenericReservedBW Unsigned32,
|
|
pwGenericPwNumber Unsigned32,
|
|
pwGenericConfigurationSet INTEGER,
|
|
pwGenericFlowLabel INTEGER}
|
|
|
|
pwGenericIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each entry.
|
|
"
|
|
::= { pwGenericEntry 1 }
|
|
|
|
pwGenericName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the pseudowire, for example
|
|
'pw:1:2:1-2', where the first number indicates
|
|
subrack, the second slot number and the third/fourth
|
|
are the port numbers.
|
|
"
|
|
::= { pwGenericEntry 2 }
|
|
|
|
pwGenericIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique identifier used for referencing this object.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwGenericEntry 3 }
|
|
|
|
pwGenericInternalReference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For internal use only.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 4 }
|
|
|
|
pwGenericDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configurable label for describing the pseudowire.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwGenericEntry 5 }
|
|
|
|
pwGenericOutboundLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pseudowire label used in the outbound direction,
|
|
Actual label range is 16-1048575, 0-15 is reserved.
|
|
(i.e. towards the PSN)
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 6 }
|
|
|
|
pwGenericInboundLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pseudowire label used in the the inbound direction,
|
|
Actual label range is 16-1048575, 0-15 is reserved.
|
|
(i.e. from the PSN)
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 7 }
|
|
|
|
pwGenericInPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the number of frames received
|
|
by this pseudowire since last reset of counters.
|
|
Continuous (free running) pseudowire counter.
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 8 }
|
|
|
|
pwGenericInBytes OBJECT-TYPE
|
|
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the number of bytes received by
|
|
this pseudowire since last reset of counters.
|
|
Continuous (free running) pseudowire counter.
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 9 }
|
|
|
|
pwGenericOutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the number of frames sent by
|
|
this pseudowire since last reset of counters.
|
|
Continuous (free running) pseudowire counter.
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 10 }
|
|
|
|
pwGenericOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the number of bytes sent by this
|
|
pseudowire since last reset of counters.
|
|
Continuous (free running) pseudowire counter.
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 11 }
|
|
|
|
pwGenericResetCont OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
reset (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the continuous (free running) pseudowire
|
|
counters. After a successful reset the default value
|
|
(normal) is restored in this action attribute.
|
|
Only valid for edge pseudowire.
|
|
"
|
|
DEFVAL { normal }
|
|
::= { pwGenericEntry 12 }
|
|
|
|
pwGenericRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows via snmp.
|
|
See also SNMPv2-TC.
|
|
This object is only valid for creation and deletion of edge pseudowire.
|
|
The corresponding MPLS pseudowire table and Ethernet pseudowire table
|
|
will be created as well.
|
|
|
|
Note: The newly created object will not necessarily
|
|
receive the same index as used in the create
|
|
procedure.
|
|
"
|
|
::= { pwGenericEntry 13 }
|
|
|
|
pwGenericPwType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
edge (1),
|
|
multiSeg (2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of pseudowire. Edge pseudowire spans a single
|
|
segment between two PEs. The pseudowire label is unchanged
|
|
between the originating and terminating PEs.
|
|
Multi-segment pseudowire is a configured set of two pseudowire
|
|
segments that behave and function as a single point-to-point pseudowire.
|
|
"
|
|
DEFVAL { edge }
|
|
::= { pwGenericEntry 14 }
|
|
|
|
pwGenericTrafficClass OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The entry signifies the Traffic Class set on the traffic
|
|
on entering the pseudowire. Setting the traffic class to -1 is not supported.
|
|
"
|
|
DEFVAL { 4 }
|
|
::= { pwGenericEntry 15 }
|
|
|
|
pwGenericReservedBW OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bandwidth reserved by the pseudowire.
|
|
Default value is 0 and indicates that no bandwidth
|
|
has been allocated by the pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 16 }
|
|
|
|
pwGenericPwNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pseudowire number is used for index calculations
|
|
The number is unique and generated by system.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 17 }
|
|
|
|
pwGenericConfigurationSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PW configuartion set in hardware
|
|
|
|
true - Indicates that the configuration is set
|
|
false - Indicates that the configuration is not set
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 18 }
|
|
|
|
pwGenericFlowLabel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flow label
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwGenericEntry 19 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- MPLS PW Table
|
|
-- ----------------------------------------------------
|
|
|
|
pwMplsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwMplsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MPLS pseudowire list."
|
|
::= { pwMplsList 1 }
|
|
|
|
pwMplsEntry OBJECT-TYPE
|
|
SYNTAX PwMplsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the MPLS pseudowire list. Each entry
|
|
represents one tunnel mapped to a pseudowire.
|
|
"
|
|
INDEX { pwMplsIndex }
|
|
::= { pwMplsTable 1 }
|
|
|
|
PwMplsEntry ::=
|
|
SEQUENCE {
|
|
pwMplsIndex Unsigned32,
|
|
pwMplsName MgmtNameString,
|
|
pwMplsIdentifier DisplayString,
|
|
pwMplsInternalReference Unsigned32,
|
|
pwMplsOutboundTunnelId DisplayString,
|
|
pwMplsAssociateTunnel CommandString,
|
|
pwMplsRowStatus RowStatus
|
|
}
|
|
|
|
pwMplsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each entry.
|
|
"
|
|
::= { pwMplsEntry 1 }
|
|
|
|
pwMplsName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the pseudowire, for example
|
|
'pw:1:2:id', where the first number indicates
|
|
subrack, the second slot number and the id is the
|
|
same as the pseudowire identifier configured in the
|
|
corresponding entry in the pwTable.
|
|
"
|
|
::= { pwMplsEntry 2 }
|
|
|
|
pwMplsIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique identifier used for referencing this object.
|
|
This will be identical to the identifier of the
|
|
corresponding entry generic pseudowire entry
|
|
in pwTable.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwMplsEntry 3 }
|
|
|
|
pwMplsInternalReference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For internal use only.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwMplsEntry 4 }
|
|
|
|
pwMplsOutboundTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier of the MPLS tunnel that the pseudowire
|
|
is connected to.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwMplsEntry 5 }
|
|
|
|
pwMplsAssociateTunnel OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Internal command for connecting a pseudowire to
|
|
a MPLS tunnel object. The MPLS tunnel is intended to
|
|
carry the pseudowire traffic. The reference will be
|
|
displayed in pwMplsOutboundTunnelId attribute for the
|
|
pseudowire object.
|
|
"
|
|
::= { pwMplsEntry 6 }
|
|
|
|
|
|
pwMplsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows via snmp.
|
|
See also SNMPv2-TC.
|
|
This object is only valid for creation and deletion of edge pseudowire.
|
|
|
|
Note: The newly created object will not necessarily
|
|
receive the same index as used in the create
|
|
procedure.
|
|
"
|
|
::= { pwMplsEntry 7 }
|
|
-- ----------------------------------------------------
|
|
-- Ethernet PW Table
|
|
-- ----------------------------------------------------
|
|
|
|
pwEnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwEnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet pseudowire list."
|
|
::= { pwEnetList 1 }
|
|
|
|
pwEnetEntry OBJECT-TYPE
|
|
SYNTAX PwEnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the pw ethernet list. Every entry
|
|
represents one PW classification mapped to a pseudowire, together
|
|
with a VLAN operation.
|
|
"
|
|
INDEX { pwEnetIndex }
|
|
::= { pwEnetTable 1 }
|
|
|
|
PwEnetEntry ::=
|
|
SEQUENCE {
|
|
pwEnetIndex Unsigned32,
|
|
pwEnetName MgmtNameString,
|
|
pwEnetIdentifier DisplayString,
|
|
pwEnetInternalReference Unsigned32,
|
|
pwEnetPortVlan Unsigned32,
|
|
pwEnetPortIndex Unsigned32,
|
|
pwEnetPortName DisplayString,
|
|
pwEnetTpid INTEGER,
|
|
pwEnetRowStatus RowStatus,
|
|
pwEnetClassification DisplayString,
|
|
pwEnetFecType INTEGER,
|
|
pwEnetSdTagVlanActionIngress INTEGER,
|
|
pwEnetSdTagVlanIngress Unsigned32,
|
|
pwEnetSdTagVlanActionEgress INTEGER,
|
|
pwEnetSdTagVlanEgress Unsigned32,
|
|
pwEnetOpMode INTEGER,
|
|
pwEnetIfNo PortNumber,
|
|
pwEnetTxPort PortNumber,
|
|
pwEnetInterfaceName DisplayString }
|
|
|
|
pwEnetIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each entry.
|
|
"
|
|
::= { pwEnetEntry 1 }
|
|
|
|
pwEnetName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the pseudowire, for example
|
|
'pw:1:2:id', where the first number indicates
|
|
subrack, the second slot number and the id is the
|
|
same as the pseudowire identifier configured in the
|
|
corresponding entry in the pwTable.
|
|
"
|
|
::= { pwEnetEntry 2 }
|
|
|
|
|
|
pwEnetIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an unique identifier used for referencing this
|
|
object. The identifier will be used as reference to the
|
|
pwEnet object in the generic pwTable.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwEnetEntry 3 }
|
|
|
|
pwEnetInternalReference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For internal use only.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 4 }
|
|
|
|
pwEnetPortVlan OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines if the mapping between the
|
|
original port to the pseudowire is VLAN based or not.
|
|
In case of VLAN mapping, this object indicates the
|
|
VLAN ID value on the original port.
|
|
The value of '4095' is used if the whole original port
|
|
traffic is mapped to the pseudowire.
|
|
"
|
|
DEFVAL { 4095 }
|
|
::= { pwEnetEntry 5 }
|
|
|
|
pwEnetPortIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the index of the port associated
|
|
with this pseudowire for point-to-point Ethernet
|
|
service.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { pwEnetEntry 6 }
|
|
|
|
pwEnetPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the name of the port associated
|
|
with this pseudowire for point-to-point Ethernet
|
|
service.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwEnetEntry 7 }
|
|
|
|
pwEnetTpid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined (0),
|
|
anyTag (1),
|
|
qTag0x8100 (2),
|
|
sTag0x88a8 (3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines ether type tag information
|
|
for the mapping of VLAN on the entry port.
|
|
"
|
|
DEFVAL { 3 }
|
|
::= { pwEnetEntry 8 }
|
|
|
|
pwEnetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows.
|
|
See also SNMPv2-TC.
|
|
|
|
Note: The newly created object will not necessarily
|
|
receive the same index as used in the create
|
|
procedure.
|
|
"
|
|
::= { pwEnetEntry 9 }
|
|
|
|
pwEnetClassification OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique identifier for the policy classification connected to pseudowire.
|
|
The policy classification is located in mesClass table.
|
|
Only valid when pseudowire classification type is policy classification.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { pwEnetEntry 10 }
|
|
|
|
pwEnetFecType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
port (0),
|
|
portVlan (1),
|
|
classification (2)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mapping between the original port to the pseudowire.
|
|
port (0)
|
|
-- the whole original port traffic is mapped to the pseudowire.
|
|
portVlan (1)
|
|
-- the mapping between the original port to the pseudowire is VLAN based.
|
|
The attributes portVlan indicates the VLAN value on the original port.
|
|
classification (2)
|
|
-- the created policy classification specified the mapping between the
|
|
original port to the pseudowire.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 11 }
|
|
|
|
pwEnetSdTagVlanActionIngress OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction (0),
|
|
swap (1),
|
|
push (2),
|
|
pop (3)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the mode of VLAN handling between the
|
|
port or the virtual port associated with the pseudowire and the pseudowire
|
|
encapsulation. Action is performed for traffic entering the pseudowire.
|
|
This attribute is implicitly set from the pseudowire operation mode.
|
|
noAction (0)
|
|
-- packets will be forwarded between the port and the pseudowire
|
|
independent of their structure.
|
|
swap (1)
|
|
-- VLAN field on the pseudowire may be different than the VLAN field
|
|
on the port. The VLAN on the PE-CE link is the service-delimiting
|
|
tag but has a different value on the pseudowire.
|
|
push (2)
|
|
-- a VLAN field will be added on the pseudowire. The VLAN value is
|
|
defined by the attribute pseudowire VLAN.
|
|
pop (3)
|
|
-- the encapsulation on the pseudowire will not include the
|
|
service-delimiting VLAN field.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 12 }
|
|
|
|
pwEnetSdTagVlanIngress OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the (service-delimiting) VLAN field value on the
|
|
pseudowire. The value 4095 is used when the attribute is not applicable.
|
|
"
|
|
DEFVAL { 4095 }
|
|
::= { pwEnetEntry 13 }
|
|
|
|
pwEnetSdTagVlanActionEgress OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction (0),
|
|
swap (1),
|
|
push (2),
|
|
pop (3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the mode of VLAN handling between the
|
|
pseudowire encapsulation and the port or the virtual port associated with the pseudowire.
|
|
Action is performed on traffic exiting the pseudowire.
|
|
noAction (0)
|
|
-- packets will be forwarded between the pseudowire
|
|
independent of their structure and the port.
|
|
swap (1)
|
|
-- VLAN field on the pseudowire may be different than the VLAN field
|
|
on the port. The VLAN on the PE-CE link is the service-delimiting
|
|
tag but has a different value on the pseudowire.
|
|
push (2)
|
|
-- a VLAN field will be added on the pseudowire. The VLAN value is
|
|
defined by the attribute pseudowire VLAN.
|
|
pop (3)
|
|
-- the encapsulation on the pseudowire will not include the
|
|
service-delimiting VLAN field.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 14 }
|
|
|
|
pwEnetSdTagVlanEgress OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the (service-delimiting) VLAN field value on the
|
|
pseudowire. The value 4095 is used when the attribute is not applicable.
|
|
"
|
|
DEFVAL { 4095 }
|
|
::= { pwEnetEntry 15 }
|
|
|
|
pwEnetOpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transparent (0),
|
|
raw (1),
|
|
tagged (2)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Ethernet pseudowire operates in one of the tree modes:
|
|
transparent (0)
|
|
-- packets will be forwarded between the port and the pseudowire
|
|
independent of their structure. No action is performed on traffic
|
|
either entering or exiting the pseudowire.
|
|
raw (1)
|
|
-- service-delimiting tags are never sent over the pseudowire if Ethernet
|
|
pseudowire is operating in raw mode. If a service-delimiting tag is
|
|
present when the frame is received from the attachment circuit by the
|
|
PE, it is stripped from the frame before the frame is sent to the
|
|
pseudowire.
|
|
tagged (2)
|
|
-- every frame sent on the pseudowire must have a service-delimiting VLAN
|
|
tag if Ethernet pseudowire is operating in tagged mode. If the frame as
|
|
received by the PE from the attachment circuit does not have a service-
|
|
delimiting tag, the PE will push the frame with a VLAN tag.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 16 }
|
|
|
|
pwEnetIfNo OBJECT-TYPE
|
|
SYNTAX PortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical interface number of the multi-connector port.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 17 }
|
|
|
|
pwEnetTxPort OBJECT-TYPE
|
|
SYNTAX PortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical port that this pseudowire is
|
|
bound to.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwEnetEntry 18 }
|
|
|
|
pwEnetInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Interface connected to pw.
|
|
"
|
|
DEFVAL { " " }
|
|
::= { pwEnetEntry 19 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- MS-PW(Multi-segment pseudowire) Table
|
|
-- ----------------------------------------------------
|
|
pwMspwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwMspwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multi-segment pseudowire list."
|
|
::= { pwMspwList 1 }
|
|
|
|
pwMspwEntry OBJECT-TYPE
|
|
SYNTAX PwMspwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ms-pw list.
|
|
"
|
|
INDEX { pwMspwIndex }
|
|
::= { pwMspwTable 1 }
|
|
|
|
PwMspwEntry ::=
|
|
SEQUENCE {
|
|
pwMspwIndex Unsigned32,
|
|
pwMspwName MgmtNameString,
|
|
pwMspwIdentifier DisplayString,
|
|
pwMspwInternalReference Unsigned32,
|
|
pwMspwEastInboundLabel MplsLabel,
|
|
pwMspwEastOutboundLabel MplsLabel,
|
|
pwMspwEastOutboundTunnelId DisplayString,
|
|
pwMspwWestInboundLabel MplsLabel,
|
|
pwMspwWestOutboundLabel MplsLabel,
|
|
pwMspwWestOutboundTunnelId DisplayString,
|
|
pwMspwRowStatus RowStatus }
|
|
|
|
pwMspwIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each entry.
|
|
"
|
|
::= { pwMspwEntry 1 }
|
|
|
|
pwMspwName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the pseudowire, for example
|
|
'mspw:1:2:id', where the first number indicates
|
|
subrack, the second slot number and the id is the
|
|
same as the pseudowire identifier configured in the
|
|
corresponding entry in the generic table.
|
|
"
|
|
::= { pwMspwEntry 2 }
|
|
|
|
pwMspwIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique identifier used for referencing this object.
|
|
This will be identical to the identifier of the
|
|
corresponding entry generic pseudowire entry
|
|
in pwTable.
|
|
"
|
|
::= { pwMspwEntry 3 }
|
|
|
|
pwMspwInternalReference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For internal use only.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { pwMspwEntry 4 }
|
|
|
|
pwMspwEastInboundLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The east pseudowire label used in the the inbound direction,
|
|
Actual label range is 16-1048575, 0-15 is reserved.
|
|
"
|
|
::= { pwMspwEntry 5 }
|
|
|
|
pwMspwEastOutboundLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The east pseudowire label used in the the outbound direction,
|
|
Actual label range is 16-1048575, 0-15 is reserved.
|
|
"
|
|
::= { pwMspwEntry 6 }
|
|
|
|
pwMspwEastOutboundTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier of the MPLS tunnel intended to carry
|
|
the pseudowire traffic.
|
|
"
|
|
::= { pwMspwEntry 7 }
|
|
|
|
pwMspwWestInboundLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The west pseudowire label used in the the inbound direction,
|
|
Actual label range is 16-1048575, 0-15 is reserved.
|
|
"
|
|
::= { pwMspwEntry 8 }
|
|
|
|
pwMspwWestOutboundLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The west pseudowire label used in the the outbound direction,
|
|
Actual label range is 16-1048575, 0-15 is reserved.
|
|
"
|
|
::= { pwMspwEntry 9 }
|
|
|
|
pwMspwWestOutboundTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier of the MPLS tunnel intended to carry
|
|
the pseudowire traffic.
|
|
"
|
|
::= { pwMspwEntry 10 }
|
|
|
|
pwMspwRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows.
|
|
See also SNMPv2-TC.
|
|
This object is used for creation and deletion of multi-segment pseudowire.
|
|
The corresponding pseudowire generic table will be created as well.
|
|
Note: The newly created object will not necessarily
|
|
receive the same index as used in the create
|
|
procedure.
|
|
"
|
|
::= { pwMspwEntry 11 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Notifications
|
|
-- ----------------------------------------------------
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
pwGeneralGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwGeneralLastChangeTime,
|
|
pwGeneralStateLastChangeTime,
|
|
pwGeneralPwGenericTableSize,
|
|
pwGeneralPwMplsTableSize,
|
|
pwGeneralPwEnetTableSize}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general objects."
|
|
::= { lumPwGroups 1 }
|
|
|
|
pwGenericGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwGenericIndex,
|
|
pwGenericName,
|
|
pwGenericIdentifier,
|
|
pwGenericInternalReference,
|
|
pwGenericDescr,
|
|
pwGenericOutboundLabel,
|
|
pwGenericInboundLabel,
|
|
pwGenericInPackets,
|
|
pwGenericInBytes,
|
|
pwGenericOutPackets,
|
|
pwGenericOutBytes,
|
|
pwGenericResetCont,
|
|
pwGenericRowStatus }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The generic pseudowire objects (R18.0)."
|
|
::= { lumPwGroups 2 }
|
|
|
|
pwMplsGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwMplsIndex,
|
|
pwMplsName,
|
|
pwMplsIdentifier,
|
|
pwMplsInternalReference,
|
|
pwMplsOutboundTunnelId,
|
|
pwMplsAssociateTunnel }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The mpls pseudowire objects (R18.0)."
|
|
::= { lumPwGroups 3 }
|
|
|
|
pwEnetGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwEnetIndex,
|
|
pwEnetName,
|
|
pwEnetIdentifier,
|
|
pwEnetInternalReference,
|
|
pwEnetPortVlan,
|
|
pwEnetPortIndex,
|
|
pwEnetPortName,
|
|
pwEnetTpid,
|
|
pwEnetRowStatus}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ethernet pseudowire objects (R18.0)."
|
|
::= { lumPwGroups 4 }
|
|
|
|
pwEnetGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwEnetIndex,
|
|
pwEnetName,
|
|
pwEnetIdentifier,
|
|
pwEnetInternalReference,
|
|
pwEnetPortVlan,
|
|
pwEnetPortIndex,
|
|
pwEnetPortName,
|
|
pwEnetTpid,
|
|
pwEnetRowStatus,
|
|
pwEnetClassification,
|
|
pwEnetFecType,
|
|
pwEnetSdTagVlanActionIngress,
|
|
pwEnetSdTagVlanIngress,
|
|
pwEnetSdTagVlanActionEgress,
|
|
pwEnetSdTagVlanEgress,
|
|
pwEnetOpMode }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ethernet pseudowire objects (R20.0)."
|
|
::= { lumPwGroups 5 }
|
|
|
|
pwGeneralGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwGeneralLastChangeTime,
|
|
pwGeneralStateLastChangeTime,
|
|
pwGeneralPwGenericTableSize,
|
|
pwGeneralPwMplsTableSize,
|
|
pwGeneralPwEnetTableSize,
|
|
pwGeneralPwMspwTableSize }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The general objects (R20.0)"
|
|
::= { lumPwGroups 6 }
|
|
|
|
pwMspwGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwMspwIndex,
|
|
pwMspwName,
|
|
pwMspwIdentifier,
|
|
pwMspwInternalReference,
|
|
pwMspwEastInboundLabel,
|
|
pwMspwEastOutboundLabel,
|
|
pwMspwEastOutboundTunnelId,
|
|
pwMspwWestInboundLabel,
|
|
pwMspwWestOutboundLabel,
|
|
pwMspwWestOutboundTunnelId,
|
|
pwMspwRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multi-segment pseudowire objects (R20.0)."
|
|
::= { lumPwGroups 7 }
|
|
|
|
pwGenericGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwGenericIndex,
|
|
pwGenericName,
|
|
pwGenericIdentifier,
|
|
pwGenericInternalReference,
|
|
pwGenericDescr,
|
|
pwGenericOutboundLabel,
|
|
pwGenericInboundLabel,
|
|
pwGenericInPackets,
|
|
pwGenericInBytes,
|
|
pwGenericOutPackets,
|
|
pwGenericOutBytes,
|
|
pwGenericResetCont,
|
|
pwGenericRowStatus,
|
|
pwGenericPwType,
|
|
pwGenericTrafficClass,
|
|
pwGenericReservedBW}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The generic pseudowire objects (R20.0)."
|
|
::= { lumPwGroups 8 }
|
|
|
|
pwEnetGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwEnetIndex,
|
|
pwEnetName,
|
|
pwEnetIdentifier,
|
|
pwEnetInternalReference,
|
|
pwEnetPortVlan,
|
|
pwEnetPortIndex,
|
|
pwEnetPortName,
|
|
pwEnetTpid,
|
|
pwEnetRowStatus,
|
|
pwEnetClassification,
|
|
pwEnetFecType,
|
|
pwEnetSdTagVlanActionIngress,
|
|
pwEnetSdTagVlanIngress,
|
|
pwEnetSdTagVlanActionEgress,
|
|
pwEnetSdTagVlanEgress,
|
|
pwEnetOpMode,
|
|
pwEnetIfNo,
|
|
pwEnetTxPort,
|
|
pwEnetInterfaceName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet pseudowire objects (R28.0)."
|
|
::= { lumPwGroups 9 }
|
|
|
|
pwGenericGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwGenericIndex,
|
|
pwGenericName,
|
|
pwGenericIdentifier,
|
|
pwGenericInternalReference,
|
|
pwGenericDescr,
|
|
pwGenericOutboundLabel,
|
|
pwGenericInboundLabel,
|
|
pwGenericInPackets,
|
|
pwGenericInBytes,
|
|
pwGenericOutPackets,
|
|
pwGenericOutBytes,
|
|
pwGenericResetCont,
|
|
pwGenericRowStatus,
|
|
pwGenericPwType,
|
|
pwGenericTrafficClass,
|
|
pwGenericReservedBW,
|
|
pwGenericPwNumber,
|
|
pwGenericConfigurationSet,
|
|
pwGenericFlowLabel}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The generic pseudowire objects (R28.0)."
|
|
::= { lumPwGroups 10 }
|
|
|
|
pwMplsGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwMplsIndex,
|
|
pwMplsName,
|
|
pwMplsIdentifier,
|
|
pwMplsInternalReference,
|
|
pwMplsOutboundTunnelId }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The mpls pseudowire objects (R28.0)."
|
|
::= { lumPwGroups 11 }
|
|
|
|
pwMplsGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
pwMplsIndex,
|
|
pwMplsName,
|
|
pwMplsIdentifier,
|
|
pwMplsInternalReference,
|
|
pwMplsOutboundTunnelId,
|
|
pwMplsRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mpls pseudowire objects (R30.0)."
|
|
::= { lumPwGroups 12 }
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
lumPwBasicComplV1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the
|
|
pseudowire MIB. (R18.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
pwGeneralGroupV1,
|
|
pwGenericGroupV1,
|
|
pwMplsGroupV1,
|
|
pwEnetGroupV1 }
|
|
::= { lumPwCompl 1 }
|
|
|
|
lumPwBasicComplV2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the
|
|
pseudowire MIB. (R20.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
pwGeneralGroupV2,
|
|
pwGenericGroupV2,
|
|
pwMplsGroupV1,
|
|
pwEnetGroupV2,
|
|
pwMspwGroupV1 }
|
|
::= { lumPwCompl 2 }
|
|
|
|
lumPwBasicComplV3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the
|
|
pseudowire MIB. (R28.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
pwGeneralGroupV2,
|
|
pwGenericGroupV3,
|
|
pwMplsGroupV2,
|
|
pwEnetGroupV3,
|
|
pwMspwGroupV1 }
|
|
::= { lumPwCompl 3 }
|
|
|
|
|
|
lumPwBasicComplV4 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the
|
|
pseudowire MIB. (R30.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
pwGeneralGroupV2,
|
|
pwGenericGroupV3,
|
|
pwMplsGroupV3,
|
|
pwEnetGroupV3,
|
|
pwMspwGroupV1 }
|
|
::= { lumPwCompl 4 }
|
|
END
|
|
|
|
|