732 lines
23 KiB
Plaintext
732 lines
23 KiB
Plaintext
-- ===========================================================================================================
|
|
-- Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
|
|
--
|
|
-- Description: Mdc MIB
|
|
-- Reference:
|
|
-- Version: V1.1
|
|
-- History:
|
|
-- revision 1.0 2013-03-05 created by c08124
|
|
-- revision 1.1 2014-03-12 Modified h3cMDCAllocateGroupIndex
|
|
-- from (1..2147483647) to (-2147483648..2147483647)
|
|
-- by j08116
|
|
--
|
|
-- ============================================================================================================
|
|
H3C-MDC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
entPhysicalIndex
|
|
FROM ENTITY-MIB
|
|
h3cCommon
|
|
FROM HUAWEI-3COM-OID-MIB
|
|
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC;
|
|
|
|
h3cMDC MODULE-IDENTITY
|
|
LAST-UPDATED "201303051448Z"
|
|
ORGANIZATION
|
|
"Hangzhou H3C Tech. Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team Hangzhou H3C Tech. Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip:100085"
|
|
DESCRIPTION
|
|
"This MIB contains objects to manage MDC (Multitenant Device Context) operations.
|
|
|
|
Such as:
|
|
1. Configure MDCs for a device and display MDCs and their status.
|
|
2. Assign CPU, storage space, and memory space resources to the MDC, and display their status.
|
|
3. Authorize the MDC to use the interface cards, and assign physical interfaces to an MDC.
|
|
|
|
Default MDC: A device supporting MDCs is an MDC itself, and it is called the default MDC.
|
|
From the default MDC, administrators can manage the entire physical device, create and delete non-default MDCs,
|
|
and assign interfaces, CPU resources, storage space, and memory space to non-default MDCs.
|
|
|
|
Non-default MDC: No MDCs can be created on a non-default MDC.
|
|
Administrators of non-default MDCs can only manage and maintain their respective MDCs.
|
|
A non-default MDC can use only the resources assigned to it."
|
|
REVISION "201303051448Z"
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { h3cCommon 136 }
|
|
|
|
|
|
-- Scalar MIB objects, which are considered as global variables
|
|
-- Global Level Configuration
|
|
H3cMdcActionValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"start: start the MDC
|
|
stop: stop the MDC"
|
|
SYNTAX INTEGER
|
|
{
|
|
start(1),
|
|
stop(2)
|
|
}
|
|
|
|
H3cMdcRunStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the MDC:
|
|
inactive: The MDC is stopped or not started yet.
|
|
starting: The device is executing the mdc start command to start the MDC.
|
|
active: The MDC is operating properly.
|
|
stopping: The device is executing the undo mdc start command to stop the MDC.
|
|
updating: The device is executing the location command to authorize the MDC to use an interface card."
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
starting(2),
|
|
active(3),
|
|
stopping(4),
|
|
updating(5)
|
|
}
|
|
|
|
|
|
-- Node definitions
|
|
|
|
h3cMDCScalarObjects OBJECT IDENTIFIER ::= { h3cMDC 1 }
|
|
|
|
h3cMDCMaxMDCNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of MDCs which the system supported to create."
|
|
::= { h3cMDCScalarObjects 1 }
|
|
|
|
|
|
h3cMDCCurrentMDCNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of MDCs which the system has created."
|
|
::= { h3cMDCScalarObjects 2 }
|
|
|
|
h3cMDCTables OBJECT IDENTIFIER ::= { h3cMDC 2 }
|
|
|
|
-- The operation and information for MDC.
|
|
h3cMDCControl OBJECT IDENTIFIER ::= { h3cMDCTables 1 }
|
|
|
|
|
|
h3cMDCControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure MDCs for a device and show MDC's status."
|
|
::= { h3cMDCControl 1 }
|
|
|
|
|
|
h3cMDCControlEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCControlTable, every entry is corresponding with an MDC."
|
|
INDEX { h3cMDCIndex }
|
|
::= { h3cMDCControlTable 1 }
|
|
|
|
|
|
H3cMDCControlEntry ::=
|
|
SEQUENCE
|
|
{
|
|
h3cMDCIndex
|
|
Integer32,
|
|
h3cMDCName
|
|
DisplayString,
|
|
h3cMDCAction
|
|
H3cMdcActionValue,
|
|
h3cMDCStatus
|
|
H3cMdcRunStatus,
|
|
h3cMDCRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
h3cMDCIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MDC ID is used as MDCIndex, the value range of MDC ID depends on the device model.
|
|
MDCIndex cannot be modified after creation."
|
|
::= { h3cMDCControlEntry 1 }
|
|
|
|
|
|
h3cMDCName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the MDC name, a case-sensitive string of 1 to 15 characters.
|
|
The MDC name cannot be modified after creation."
|
|
::= { h3cMDCControlEntry 2 }
|
|
|
|
|
|
h3cMDCAction OBJECT-TYPE
|
|
SYNTAX H3cMdcActionValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of MDC action: start/stop.
|
|
After an MDC is started, administrators of the MDC can log in to
|
|
the MDC for MDC configuration and maintenance.
|
|
Stopping an MDC interrupts all services on the MDC and logs out
|
|
all users of the MDC.
|
|
|
|
Non-default MDC cannot operate."
|
|
DEFVAL { stop }
|
|
::= { h3cMDCControlEntry 3 }
|
|
|
|
|
|
h3cMDCStatus OBJECT-TYPE
|
|
SYNTAX H3cMdcRunStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of MDCs."
|
|
::= { h3cMDCControlEntry 4 }
|
|
|
|
|
|
h3cMDCRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry.
|
|
Only support active, createAndGo and destroy."
|
|
::= { h3cMDCControlEntry 5 }
|
|
|
|
|
|
h3cMDCResource OBJECT IDENTIFIER ::= { h3cMDCTables 2 }
|
|
|
|
|
|
h3cMDCDISKResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCDISKResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for disk resource management:
|
|
Specify a disk space percentage for an MDC and display the disk space usage.
|
|
|
|
Default: All MDCs share the disk space in the system,
|
|
and an MDC can use all free disk space in the system.
|
|
|
|
Non-default MDC can only query the disk space usage."
|
|
::= { h3cMDCResource 1 }
|
|
|
|
|
|
h3cMDCDISKResourceEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCDISKResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCDISKResourceTable, every entry is corresponding to
|
|
disk resource of an MDC.
|
|
|
|
Note that only entPhysicalIndex values that represent
|
|
physical boards (i.e., associated entPhysicalClass value is
|
|
'module(9)') are permitted to exist in this table."
|
|
INDEX { entPhysicalIndex, h3cMDCIndex, h3cMDCDISKResourceInstance }
|
|
::= { h3cMDCDISKResourceTable 1 }
|
|
|
|
|
|
H3cMDCDISKResourceEntry ::=
|
|
SEQUENCE {
|
|
h3cMDCDISKResourceInstance
|
|
Integer32,
|
|
h3cMDCDISKResourceInstanceName
|
|
DisplayString,
|
|
h3cMDCDISKResourceMinLimit
|
|
Integer32,
|
|
h3cMDCDISKResourceMaxLimit
|
|
Integer32,
|
|
h3cMDCDISKResourceReserve
|
|
Unsigned32,
|
|
h3cMDCDISKResourceQuota
|
|
Unsigned32,
|
|
h3cMDCDISKResourceUsage
|
|
Unsigned32,
|
|
h3cMDCDISKResourceAvailable
|
|
Unsigned32
|
|
}
|
|
|
|
h3cMDCDISKResourceInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Instance index of disk resource.
|
|
Different instances for disk: Flash, CF cards."
|
|
::= { h3cMDCDISKResourceEntry 1 }
|
|
|
|
|
|
h3cMDCDISKResourceInstanceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Instance name of disk resource.
|
|
|
|
Such as: Flash, CF cards."
|
|
::= { h3cMDCDISKResourceEntry 2 }
|
|
|
|
|
|
h3cMDCDISKResourceMinLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Limit minimum (reserve resources, must be all 0)."
|
|
::= { h3cMDCDISKResourceEntry 3 }
|
|
|
|
|
|
h3cMDCDISKResourceMaxLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum of available resources of disk.
|
|
Make sure the disk space amount assigned to an MDC is
|
|
greater than the disk space amount the MDC is using.
|
|
Non-default MDC cannot set"
|
|
::= { h3cMDCDISKResourceEntry 4 }
|
|
|
|
h3cMDCDISKResourceReserve OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reserve limit resources of disk."
|
|
::= { h3cMDCDISKResourceEntry 5 }
|
|
|
|
h3cMDCDISKResourceQuota OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total limit resources of disk according to h3cMDCDiskResourceMaxLimit."
|
|
::= { h3cMDCDISKResourceEntry 6 }
|
|
|
|
|
|
h3cMDCDISKResourceUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current usage of disk resources."
|
|
::= { h3cMDCDISKResourceEntry 7 }
|
|
|
|
|
|
h3cMDCDISKResourceAvailable OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current available resources of disk."
|
|
::= { h3cMDCDISKResourceEntry 8 }
|
|
|
|
h3cMDCMemoryResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCMemoryResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for memory resource management:
|
|
Specify a memory space percentage for an MDC and display the memory space usage.
|
|
Default: All MDCs share the memory space in the system, and an MDC can use all free memory.
|
|
|
|
Non-default MDC can only query resource message of memory."
|
|
::= { h3cMDCResource 2 }
|
|
|
|
|
|
h3cMDCMemoryResourceEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCMemoryResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCMemoryResourceTable, every entry is corresponding
|
|
with memory resource of an MDC.
|
|
|
|
Note that only entPhysicalIndex values that represent
|
|
physical boards (i.e., associated entPhysicalClass value is
|
|
'module(9)') are permitted to exist in this table."
|
|
INDEX { entPhysicalIndex, h3cMDCIndex }
|
|
::= { h3cMDCMemoryResourceTable 1 }
|
|
|
|
|
|
H3cMDCMemoryResourceEntry ::=
|
|
SEQUENCE {
|
|
h3cMDCMemoryResourceMinLimit
|
|
Integer32,
|
|
h3cMDCMemoryResourceMaxLimit
|
|
Integer32,
|
|
h3cMDCMemoryResourceReserve
|
|
Unsigned32,
|
|
h3cMDCMemoryResourceQuota
|
|
Unsigned32,
|
|
h3cMDCMemoryResourceUsage
|
|
Unsigned32,
|
|
h3cMDCMemoryResourceAvailable
|
|
Unsigned32
|
|
}
|
|
|
|
h3cMDCMemoryResourceMinLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Limit minimum(reserve resources, must be all 0).
|
|
|
|
Non-default MDC cannot set."
|
|
::= { h3cMDCMemoryResourceEntry 1 }
|
|
|
|
|
|
h3cMDCMemoryResourceMaxLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum of available resources of memory,
|
|
it specifies the ratio of the memory space that an MDC can use.
|
|
Make sure this amount is sufficient for the MDC to operate properly.
|
|
Non-default MDC cannot set."
|
|
::= { h3cMDCMemoryResourceEntry 2 }
|
|
|
|
h3cMDCMemoryResourceReserve OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reserve limit resources of memory."
|
|
::= { h3cMDCMemoryResourceEntry 3 }
|
|
|
|
h3cMDCMemoryResourceQuota OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total limit resources of memory."
|
|
::= { h3cMDCMemoryResourceEntry 4 }
|
|
|
|
h3cMDCMemoryResourceUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current usage of memory resources."
|
|
::= { h3cMDCMemoryResourceEntry 5 }
|
|
|
|
h3cMDCMemoryResourceAvailable OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current available value of memory resources."
|
|
::= { h3cMDCMemoryResourceEntry 6 }
|
|
|
|
h3cMDCCPUResourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCCPUResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for CPU resource management:
|
|
Specify a CPU weight for an MDC and display the CPU usage.
|
|
The amount of CPU resources an MDC can use depends on the CPU weight
|
|
settings for all MDCs that share the same CPU.
|
|
|
|
Non-default MDC can only query CPU resources."
|
|
::= { h3cMDCResource 3 }
|
|
|
|
|
|
h3cMDCCPUResourceEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCCPUResourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCCPUResourceTable, every entry is corresponding
|
|
with CPU resources of an MDC.
|
|
|
|
Note that only entPhysicalIndex values that represent
|
|
physical boards (i.e., associated entPhysicalClass value is
|
|
'module(9)') are permitted to exist in this table."
|
|
INDEX {entPhysicalIndex, h3cMDCIndex }
|
|
::= { h3cMDCCPUResourceTable 1 }
|
|
|
|
|
|
H3cMDCCPUResourceEntry ::=
|
|
SEQUENCE {
|
|
h3cMDCCPUResourceLimit
|
|
Integer32,
|
|
h3cMDCCPUResourceUsage
|
|
Integer32
|
|
}
|
|
|
|
h3cMDCCPUResourceLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
UNITS "weight"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU weight-maximum of available resources of CPU,
|
|
this number specifies a CPU weight for an MDC.
|
|
Non-default MDC cannot set."
|
|
::= { h3cMDCCPUResourceEntry 1 }
|
|
|
|
|
|
h3cMDCCPUResourceUsage OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the CPU usage"
|
|
::= { h3cMDCCPUResourceEntry 2 }
|
|
|
|
|
|
-- The MDC location status.
|
|
h3cMDCLocation OBJECT IDENTIFIER ::= { h3cMDCTables 3 }
|
|
|
|
h3cMDCLocationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCLocationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for location management:
|
|
Authorize an MDC to use an interface card and query state of location.
|
|
To assign physical interfaces to an MDC, administrators must authorize the MDC
|
|
to use the interface cards to which the physical interfaces belong.
|
|
|
|
Default: All interface cards of the device belong to the default MDC,
|
|
and a non-default MDC cannot use any interface card.
|
|
Non-default MDC can only query location state."
|
|
::= { h3cMDCLocation 1 }
|
|
|
|
|
|
h3cMDCLocationEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCLocationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCLocationTable, every entry is the status
|
|
whether an MDC has been Authorized to use the interface cards.
|
|
|
|
Note that only entPhysicalIndex values that represent
|
|
physical boards (i.e., associated entPhysicalClass value is
|
|
'module(9)') are permitted to exist in this table."
|
|
INDEX { entPhysicalIndex, h3cMDCIndex }
|
|
::= { h3cMDCLocationTable 1 }
|
|
|
|
|
|
H3cMDCLocationEntry ::=
|
|
SEQUENCE {
|
|
h3cMDCLocationStatus
|
|
TruthValue
|
|
}
|
|
|
|
h3cMDCLocationStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To authorize the MDC to use the interface cards, set the value
|
|
of this object to 'true (1)'. To cancel the authorization, set this
|
|
value to 'false (2)'.
|
|
|
|
Note that the return noError means the command is being executed.
|
|
For the execution result, check h3cMDCLocationStatus."
|
|
::= { h3cMDCLocationEntry 1 }
|
|
|
|
|
|
-- The interfaces allocate information.
|
|
h3cMDCAllocate OBJECT IDENTIFIER ::= { h3cMDCTables 4 }
|
|
|
|
h3cMDCGroupIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCGroupIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table indication of relation between interfaces and groups,
|
|
which helps to realize the allocation, together with h3cMDCAllocateTable.
|
|
|
|
Non-default MDC cannot operate."
|
|
::= { h3cMDCAllocate 1 }
|
|
|
|
|
|
h3cMDCGroupIfEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCGroupIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCGroupIfTable, every entry is the relationship
|
|
between interfaces and groups.
|
|
|
|
Due to hardware restrictions, the interfaces on some interface cards are grouped.
|
|
The interfaces in a group must be assigned to the same MDC at the same time or
|
|
removed from an MDC at the same time. Interface grouping depends on the device model.
|
|
|
|
This table is used for h3cMDCAllocateTable to show interfae group lists.
|
|
|
|
Note that only entPhysicalIndex values that represent
|
|
physical ports (i.e., associated entPhysicalClass value is
|
|
'port(10)') are permitted to exist in this table."
|
|
INDEX { entPhysicalIndex }
|
|
::= { h3cMDCGroupIfTable 1 }
|
|
|
|
|
|
H3cMDCGroupIfEntry ::=
|
|
SEQUENCE {
|
|
h3cMDCGroupIdentity
|
|
Integer32
|
|
}
|
|
|
|
h3cMDCGroupIdentity OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface group ID. There are two parts for this id
|
|
depicted as follows:
|
|
|
|
31 7 0
|
|
+++++++++++++++++++++++++++++++++++++++++
|
|
+ entity index + group index +
|
|
+ ( bit 8..31 ) ( bit 0..7 ) +
|
|
+++++++++++++++++++++++++++++++++++++++++
|
|
|
|
From bit0 to bit7 (one byte), it is interfaces group index.
|
|
|
|
From bit8 to bit31 (three bytes), it is the physical index
|
|
the same as the entPhysicalIndex specified in ENTITY-MIB.
|
|
Note that only entPhysicalIndex values that represent
|
|
physical boards (i.e., associated entPhysicalClass value is
|
|
'module(9)') are permitted to exist in this table."
|
|
::= { h3cMDCGroupIfEntry 2 }
|
|
|
|
h3cMDCAllocateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cMDCAllocateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to assigning a physical interface to an MDC.
|
|
It is allowed that allocate interfaces to a non-default MDC from the default MDC,
|
|
and allocate interfaces back to the default MDC from a non-default MDC.
|
|
|
|
All physical interfaces on the device belong to the default MDC,
|
|
and a non-default MDC has no physical interfaces to use.
|
|
Multiple physical interfaces can be assigned to a non-default MDC.
|
|
A physical interface must meet the following conditions to be assigned to a non-default MDC:
|
|
1. Belongs to the default MDC.
|
|
2. Not the console or AUX port.
|
|
3. Not the management Ethernet interface.
|
|
4. Not in an interface group with an interface assigned to another MDC.
|
|
5. The default MDC uses only the physical interfaces that are not assigned to a non-default MDC.
|
|
|
|
Non-default MDC cannot set this table."
|
|
::= { h3cMDCAllocate 2 }
|
|
|
|
|
|
h3cMDCAllocateEntry OBJECT-TYPE
|
|
SYNTAX H3cMDCAllocateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the h3cMDCAllocateTable, every entry is the status
|
|
whether physical interfaces have been assigned to an MDC."
|
|
INDEX { h3cMDCAllocateGroupIndex }
|
|
::= { h3cMDCAllocateTable 1 }
|
|
|
|
|
|
H3cMDCAllocateEntry ::=
|
|
SEQUENCE {
|
|
h3cMDCAllocateGroupIndex
|
|
Integer32,
|
|
h3cMDCAllocateGroupDescription
|
|
DisplayString,
|
|
h3cMDCAllocateMDCId
|
|
Integer32
|
|
}
|
|
|
|
h3cMDCAllocateGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (-2147483648..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface group ID, the same as h3cMDCGroupIdentity.
|
|
There are two parts for this id.
|
|
|
|
depicted as follows:
|
|
31 7 0
|
|
+++++++++++++++++++++++++++++++++++++++++
|
|
+ entity index + group index +
|
|
+ ( bit 8..31 ) ( bit 0..7 ) +
|
|
+++++++++++++++++++++++++++++++++++++++++
|
|
|
|
From bit0 to bit7 (one byte), it is interfaces group index.
|
|
|
|
From bit8 to bit31 (three bytes), it is the physical index
|
|
the same as the entPhysicalIndex specified in ENTITY-MIB.
|
|
Note that only entPhysicalIndex values that represent
|
|
physical boards (i.e., associated entPhysicalClass value is
|
|
'module(9)') are permitted to exist in this table."
|
|
::= { h3cMDCAllocateEntry 1 }
|
|
|
|
h3cMDCAllocateGroupDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interfaces list
|
|
Such as:
|
|
GigabitEthernet4/5/0/1 to GigabitEthernet4/5/0/24,
|
|
GigabitEthernet4/5/0/48"
|
|
::= { h3cMDCAllocateEntry 2 }
|
|
|
|
|
|
h3cMDCAllocateMDCId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MDC ID is used as h3cMDCAllocateMDCId.
|
|
Default MDC: It is allowed that allocate interfaces to non-default MDC from
|
|
the default MDC, and allocate interfaces back to the default MDC from
|
|
a non-default MDC.
|
|
Non-default MDC cannot set allocation, can only query grouping of own MDC."
|
|
::= { h3cMDCAllocateEntry 3 }
|
|
|
|
|
|
h3cMDCNotification OBJECT IDENTIFIER ::= { h3cMDC 3 }
|
|
|
|
h3cMDCNotificationObjects OBJECT IDENTIFIER ::= { h3cMDCNotification 0 }
|
|
|
|
h3cMDCStateChangeToActive NOTIFICATION-TYPE
|
|
OBJECTS {h3cMDCIndex, h3cMDCName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The h3cMDCStateChangeToActive trap indicates that the MDC status has changed to active."
|
|
::= { h3cMDCNotificationObjects 1 }
|
|
|
|
h3cMDCStateChangeToInactive NOTIFICATION-TYPE
|
|
OBJECTS {h3cMDCIndex, h3cMDCName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The h3cMDCStateChangeToInactive trap indicates that the MDC status has changed to inactive."
|
|
::= { h3cMDCNotificationObjects 2 }
|
|
|
|
END
|