2220 lines
71 KiB
Plaintext
2220 lines
71 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (c) 2004-2018 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
|
|
--
|
|
-- Description: interface extension mib
|
|
-- Reference: IF-MIB
|
|
-- Version: V2.1
|
|
-- History:
|
|
-- V1.0 Created by gaolong
|
|
-- Initial version 2004-11-13
|
|
-- V1.1 2007-01-13 Modified by wanglirong
|
|
-- Added h3cIfStatGlobalFlowInterval and h3cIfSpeedStatTable
|
|
-- V1.2 Modified by chenxi
|
|
-- Added h3cRTParentIfTable, h3cRTSubIfTable, and
|
|
-- h3cIfLinkModeTable 2007-10-15
|
|
-- V1.3 2009-05-05 Added h3cIfPhysicalNumber and h3cIfTable
|
|
-- V1.4 2009-08-08 Added h3cIfMtu, h3cIfBandwidth, h3cIfDiscardPktRate,
|
|
-- and h3cIfExtTrapCfgTable
|
|
-- V1.5 2010-09-04 Added h3cIfInNUcastPkts, h3cIfOutNUcastPkts, and h3cIfStatusKeepTime by shuaixj
|
|
-- V1.6 2011-09-16 Added h3cIfHCFlowStatTable by xiedong
|
|
-- 2011-11-04 Added h3cIfIsPoe by duyanbing
|
|
-- V1.7 2013-09-13 Added h3cIfOperStatus and h3cIfDownTimes by duyanbing
|
|
-- V1.8 2014-07-23 Added h3cIfShutDownInterval and h3cIfUsingTable by xiedong
|
|
-- 2014-09-19 Added h3cIfDampeningSuppressed and h3cIfDampeningNotSuppressed by yinzhonghong
|
|
-- V1.9 2014-11-20 Added h3cIfPortTypeTable, h3cIfPfcStatus, and h3cIfPfcDot1pNoDrop by songhao
|
|
-- V2.0 2015-02-12 Added h3cIfPortUp, h3cIfPortDown by chenzhouhui
|
|
-- 2015-12-10 Added h3cIfDescription by chenzhouhui
|
|
-- V2.1 2016-07-01 Added the values 25GE and 50GE to h3cIfUsingType and h3cIfUsingSupportType by yuhaiyan
|
|
-- 2016-12-05 Added h3cIfHCSpeedStatTable by songhao.
|
|
-- 2017-07-13 Added h3cIfFwdErrDiscards by songhao.
|
|
-- 2017-12-13 Added h3cIfThroughputInKbps and h3cIfThroughputOutKbps by chenzhouhui.
|
|
-- 2018-01-09 Added h3cIfMonScalarGroup,h3cIfMonGroup ,h3cIfMonGroup and h3cIfMonTrapPrex by guhangchao.
|
|
-- 2018-02-07 Added h3cIfPortDot1pTable,h3cIfPfcOutRising and h3cIfPfcInRising by guhangchao.
|
|
-- =================================================================
|
|
H3C-IF-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
h3cCommon
|
|
FROM HUAWEI-3COM-OID-MIB
|
|
ifIndex, ifDescr, InterfaceIndex
|
|
FROM IF-MIB
|
|
Integer32, Counter64, Unsigned32, TimeTicks,
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
CounterBasedGauge64
|
|
FROM HCNUM-TC
|
|
DisplayString, RowStatus, TruthValue
|
|
FROM SNMPv2-TC;
|
|
|
|
h3cIfExt MODULE-IDENTITY
|
|
LAST-UPDATED "201802070000Z"
|
|
ORGANIZATION
|
|
"Hangzhou H3C Technologies Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team H3C Technologies Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip: 100085"
|
|
DESCRIPTION
|
|
"This MIB is an extension of interface MIBs such as IF-MIB.
|
|
|
|
This MIB is applicable to routers, switches, and other products.
|
|
|
|
Some objects in this MIB may be used only for some specific products,
|
|
so users should refer to the related documents to acquire more
|
|
detailed information.
|
|
"
|
|
REVISION "201802070000Z"
|
|
DESCRIPTION
|
|
"Added h3cIfPortDot1pTable,h3cIfPfcOutRising and h3cIfPfcInRising."
|
|
REVISION "201801090000Z"
|
|
DESCRIPTION
|
|
"Added h3cIfMonScalarGroup,h3cIfMonGroup ,h3cIfMonGroup and h3cIfMonTrapPrex."
|
|
REVISION "201712131820Z"
|
|
DESCRIPTION
|
|
"Added Added h3cIfThroughputInKbps and h3cIfThroughputOutKbps."
|
|
REVISION "201707131040Z"
|
|
DESCRIPTION
|
|
"Added h3cIfFwdErrDiscards."
|
|
REVISION "201612051800Z"
|
|
DESCRIPTION
|
|
"Added h3cIfHCSpeedStatTable."
|
|
REVISION "201607011700Z"
|
|
DESCRIPTION
|
|
"Added the values 25GE and 50GE to h3cIfUsingType and h3cIfUsingSupportType."
|
|
REVISION "201512101000Z"
|
|
DESCRIPTION
|
|
"Added h3cIfDescription."
|
|
REVISION "201504020458Z"
|
|
DESCRIPTION
|
|
"Added h3cIfPortUp and h3cIfPortDown"
|
|
REVISION "201411200800Z"
|
|
DESCRIPTION
|
|
"Added h3cIfPortTypeTable, h3cIfPfcStatus, and h3cIfPfcDot1pNoDrop."
|
|
REVISION "200905061936Z"
|
|
DESCRIPTION
|
|
"Update this MIB module."
|
|
REVISION "200411131936Z" -- December 13, 2004 at 19:36 GMT
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { h3cCommon 40 }
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- Scalar MIB objects, which are considered as global variables
|
|
-- to all interfaces on a device, are defined in this section.
|
|
h3cIfExtScalarGroup OBJECT IDENTIFIER ::= { h3cIfExt 1 }
|
|
|
|
h3cIfStatGlobalFlowInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sampling interval for in/out flow of all interfaces.
|
|
Setting zero indicates closing the statistic function."
|
|
::= { h3cIfExtScalarGroup 1 }
|
|
|
|
h3cIfShutDownInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the port status detection timer. The device starts a port status
|
|
detection timer when a port is shut down by a protocol. Once the timer
|
|
expires, the device brings up the port so the port status reflects
|
|
the port's physical status."
|
|
::= { h3cIfExtScalarGroup 2 }
|
|
|
|
h3cIfThroughputInKbps OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual incoming throughput of the device in kbps."
|
|
::= { h3cIfExtScalarGroup 3 }
|
|
|
|
h3cIfThroughputOutKbps OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual outgoing throughput of the device in kbps."
|
|
::= { h3cIfExtScalarGroup 4 }
|
|
|
|
-- =================================================================
|
|
-- All other groups are defined below. Of course, scalar objects can
|
|
-- also be defined in a subsection, but they must be one part of
|
|
-- that subsection.
|
|
|
|
-- Note that a scalar group should be defined firstly and all
|
|
-- scalar objects are placed under that group when doing so.
|
|
h3cIfExtGroup OBJECT IDENTIFIER ::= { h3cIfExt 2 }
|
|
|
|
|
|
-- =================================================================
|
|
-- The section below describes statistics of interfaces on a device.
|
|
-- These statistics may not be included in standard MIBs.
|
|
h3cIfStat OBJECT IDENTIFIER ::= { h3cIfExtGroup 1 }
|
|
|
|
-- Define a scalar group that contains all scalar objects used for
|
|
-- interface statistics.
|
|
h3cIfStatScalarGroup OBJECT IDENTIFIER ::= { h3cIfStat 1 }
|
|
|
|
h3cIfStatTable OBJECT IDENTIFIER ::= { h3cIfStat 2 }
|
|
|
|
h3cIfFlowStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to get statistic information
|
|
of interfaces on a device."
|
|
::= { h3cIfStatTable 1 }
|
|
|
|
h3cIfStatEntry OBJECT-TYPE
|
|
SYNTAX H3cIfStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry items"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfFlowStatTable 1 }
|
|
|
|
H3cIfStatEntry ::= SEQUENCE
|
|
{
|
|
h3cIfStatFlowInterval Integer32,
|
|
h3cIfStatFlowInBits Unsigned32,
|
|
h3cIfStatFlowOutBits Unsigned32,
|
|
h3cIfStatFlowInPkts Unsigned32,
|
|
h3cIfStatFlowOutPkts Unsigned32,
|
|
h3cIfStatFlowInBytes Unsigned32,
|
|
h3cIfStatFlowOutBytes Unsigned32
|
|
}
|
|
|
|
h3cIfStatFlowInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sampling interval for in/out flow of interface.
|
|
Setting zero indicates closing this statistic function
|
|
and objects in this table should return 0."
|
|
::= { h3cIfStatEntry 1 }
|
|
|
|
h3cIfStatFlowInBits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In bits in the specified interval."
|
|
::= { h3cIfStatEntry 2 }
|
|
|
|
h3cIfStatFlowOutBits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Out bits in the specified interval."
|
|
::= { h3cIfStatEntry 3 }
|
|
|
|
h3cIfStatFlowInPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In packets in the specified interval."
|
|
::= { h3cIfStatEntry 4 }
|
|
|
|
h3cIfStatFlowOutPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Out packets in the specified interval."
|
|
::= { h3cIfStatEntry 5 }
|
|
|
|
h3cIfStatFlowInBytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In bytes in the specified interval."
|
|
::= { h3cIfStatEntry 6 }
|
|
|
|
h3cIfStatFlowOutBytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Out bytes in the specified interval."
|
|
::= { h3cIfStatEntry 7 }
|
|
|
|
|
|
-- =================================================================
|
|
h3cIfSpeedStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfSpeedStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to get average speed information
|
|
in the specified interval for interfaces on a device."
|
|
::= { h3cIfStatTable 2 }
|
|
|
|
h3cIfSpeedStatEntry OBJECT-TYPE
|
|
SYNTAX H3cIfSpeedStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry items"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfSpeedStatTable 1 }
|
|
|
|
H3cIfSpeedStatEntry ::= SEQUENCE
|
|
{
|
|
h3cIfSpeedStatInterval Integer32,
|
|
h3cIfSpeedStatInPkts Unsigned32,
|
|
h3cIfSpeedStatOutPkts Unsigned32,
|
|
h3cIfSpeedStatInBytes Unsigned32,
|
|
h3cIfSpeedStatOutBytes Unsigned32
|
|
}
|
|
|
|
h3cIfSpeedStatInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sampling interval for in/out flow of interface.
|
|
Setting zero indicates closing this statistic function
|
|
and objects in this table should return 0."
|
|
::= { h3cIfSpeedStatEntry 1 }
|
|
|
|
h3cIfSpeedStatInPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of input packets per second in the specified interval by
|
|
h3cIfSpeedStatInterval."
|
|
::= { h3cIfSpeedStatEntry 2 }
|
|
|
|
h3cIfSpeedStatOutPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of output packets per second in the specified interval by
|
|
h3cIfSpeedStatInterval."
|
|
::= { h3cIfSpeedStatEntry 3 }
|
|
|
|
h3cIfSpeedStatInBytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of input bytes per second in the specified interval by
|
|
h3cIfSpeedStatInterval."
|
|
::= { h3cIfSpeedStatEntry 4 }
|
|
|
|
h3cIfSpeedStatOutBytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of output bytes per second in the specified interval by
|
|
h3cIfSpeedStatInterval."
|
|
::= { h3cIfSpeedStatEntry 5 }
|
|
|
|
-- =================================================================
|
|
h3cIfHCFlowStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfHCFlowStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to get statistic information
|
|
of interfaces on a device."
|
|
::= { h3cIfStatTable 3 }
|
|
|
|
h3cIfHCFlowStatEntry OBJECT-TYPE
|
|
SYNTAX H3cIfHCFlowStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry items"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfHCFlowStatTable 1 }
|
|
|
|
H3cIfHCFlowStatEntry ::= SEQUENCE
|
|
{
|
|
h3cIfStatFlowHCInBits CounterBasedGauge64,
|
|
h3cIfStatFlowHCOutBits CounterBasedGauge64,
|
|
h3cIfStatFlowHCInPkts CounterBasedGauge64,
|
|
h3cIfStatFlowHCOutPkts CounterBasedGauge64,
|
|
h3cIfStatFlowHCInBytes CounterBasedGauge64,
|
|
h3cIfStatFlowHCOutBytes CounterBasedGauge64
|
|
}
|
|
|
|
h3cIfStatFlowHCInBits OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In bits in the specified interval. This object is a 64-bit
|
|
version of h3cIfStatFlowInBits."
|
|
::= { h3cIfHCFlowStatEntry 1 }
|
|
|
|
h3cIfStatFlowHCOutBits OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Out bits in the specified interval. This object is a 64-bit
|
|
version of h3cIfStatFlowOutBits."
|
|
::= { h3cIfHCFlowStatEntry 2 }
|
|
|
|
h3cIfStatFlowHCInPkts OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In packets in the specified interval. This object is a 64-bit
|
|
version of h3cIfStatFlowInPkts."
|
|
::= { h3cIfHCFlowStatEntry 3 }
|
|
|
|
h3cIfStatFlowHCOutPkts OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Out packets in the specified interval. This object is a 64-bit
|
|
version of h3cIfStatFlowOutPkts."
|
|
::= { h3cIfHCFlowStatEntry 4 }
|
|
|
|
h3cIfStatFlowHCInBytes OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In bytes in the specified interval. This object is a 64-bit
|
|
version of h3cIfStatFlowInBytes."
|
|
::= { h3cIfHCFlowStatEntry 5 }
|
|
|
|
h3cIfStatFlowHCOutBytes OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Out bytes in the specified interval. This object is a 64-bit
|
|
version of h3cIfStatFlowOutBytes."
|
|
::= { h3cIfHCFlowStatEntry 6 }
|
|
|
|
-- =================================================================
|
|
h3cIfHCSpeedStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfHCSpeedStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to get average speed information
|
|
in the specified interval for interfaces on a device.
|
|
|
|
This table is a 64-bit version of h3cIfSpeedStatTable."
|
|
::= { h3cIfStatTable 4 }
|
|
|
|
h3cIfHCSpeedStatEntry OBJECT-TYPE
|
|
SYNTAX H3cIfHCSpeedStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry items"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfHCSpeedStatTable 1 }
|
|
|
|
H3cIfHCSpeedStatEntry ::= SEQUENCE
|
|
{
|
|
h3cIfSpeedStatHCInPkts CounterBasedGauge64,
|
|
h3cIfSpeedStatHCOutPkts CounterBasedGauge64,
|
|
h3cIfSpeedStatHCInBytes CounterBasedGauge64,
|
|
h3cIfSpeedStatHCOutBytes CounterBasedGauge64
|
|
}
|
|
|
|
h3cIfSpeedStatHCInPkts OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of input packets per second in the specified interval by
|
|
h3cIfSpeedStatInterval.
|
|
|
|
This object is a 64-bit version of h3cIfSpeedStatInPkts."
|
|
::= { h3cIfHCSpeedStatEntry 1 }
|
|
|
|
h3cIfSpeedStatHCOutPkts OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of output packets per second in the specified interval by
|
|
h3cIfSpeedStatInterval.
|
|
|
|
This object is a 64-bit version of h3cIfSpeedStatOutPkts."
|
|
::= { h3cIfHCSpeedStatEntry 2 }
|
|
|
|
h3cIfSpeedStatHCInBytes OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of input bytes per second in the specified interval by
|
|
h3cIfSpeedStatInterval.
|
|
|
|
This object is a 64-bit version of h3cIfSpeedStatInBytes."
|
|
::= { h3cIfHCSpeedStatEntry 3 }
|
|
|
|
h3cIfSpeedStatHCOutBytes OBJECT-TYPE
|
|
SYNTAX CounterBasedGauge64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of output bytes per second in the specified interval by
|
|
h3cIfSpeedStatInterval.
|
|
|
|
This object is a 64-bit version of h3cIfSpeedStatOutBytes."
|
|
::= { h3cIfHCSpeedStatEntry 4 }
|
|
|
|
-- =================================================================
|
|
|
|
h3cIfControl OBJECT IDENTIFIER ::= { h3cIfExtGroup 2 }
|
|
|
|
h3cRTParentIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cRTParentIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all interfaces that can create subinterfaces."
|
|
::= { h3cIfControl 1 }
|
|
|
|
h3cRTParentIfEntry OBJECT-TYPE
|
|
SYNTAX H3cRTParentIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry describes an interface that can create subinterfaces."
|
|
INDEX
|
|
{
|
|
h3cRTParentIfIndex
|
|
}
|
|
::= { h3cRTParentIfTable 1}
|
|
|
|
H3cRTParentIfEntry ::= SEQUENCE
|
|
{
|
|
h3cRTParentIfIndex Integer32,
|
|
h3cRTMinSubIfOrdinal Integer32,
|
|
h3cRTMaxSubIfOrdinal Integer32
|
|
}
|
|
|
|
h3cRTParentIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the interface that can create subinterfaces. The value
|
|
is the same as the ifIndex value for this interface."
|
|
::= { h3cRTParentIfEntry 1 }
|
|
|
|
h3cRTMinSubIfOrdinal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min ordinal of the subinterface."
|
|
::= { h3cRTParentIfEntry 2 }
|
|
|
|
h3cRTMaxSubIfOrdinal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max ordinal of the subinterface."
|
|
::= { h3cRTParentIfEntry 3 }
|
|
|
|
-- =================================================================
|
|
|
|
h3cRTSubIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cRTSubIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to create or delete subinterfaces.
|
|
To create a subinterface, a valid parent interface must be
|
|
specified by h3cRTSubIfParentIfIndex, and h3cRTSubIfOrdinal
|
|
must be in the range between h3cRTMinSubIfOrdinal and
|
|
h3cRTMaxSubIfOrdinal of the parent interface from
|
|
h3cRTParentIfTable.
|
|
|
|
Subinterfaces are logical virtual interfaces configured on a
|
|
main interface. The main interface can be either a physical
|
|
interface (such as a Layer 3 Ethernet interface) or a logical
|
|
interface (such as an MFR interface). The subinterfaces on a
|
|
main interface share the physical layer parameters of the main
|
|
interface but can have link layer and network layer parameters
|
|
of their own. Disabling or enabling a subinterface doesn't
|
|
affect the main interface, but the main interface status change
|
|
affects the subinterfaces. The subinterfaces can't operate
|
|
correctly unless the main interface is connected.
|
|
Creating multiple subinterfaces on a single interface
|
|
enables you to plan network in a more flexible way.
|
|
|
|
You can create subinterfaces for the following physical
|
|
interfaces:
|
|
Ethernet interface. An Ethernet subinterface associated with no
|
|
VLAN supports only IPX, while an Ethernet subinterface associated
|
|
with a VLAN supports both IP and IPX.
|
|
WAN interfaces with their data link layer protocols being frame
|
|
relay, whose subinterfaces support IP and IPX.
|
|
WAN interfaces with their data link layer protocols being X.25,
|
|
whose subinterfaces support IP and IPX.
|
|
ATM interface, whose subinterfaces support only IP."
|
|
::= { h3cIfControl 2 }
|
|
|
|
h3cRTSubIfEntry OBJECT-TYPE
|
|
SYNTAX H3cRTSubIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The h3cRTSubIfTable entry items"
|
|
INDEX
|
|
{
|
|
h3cRTSubIfParentIfIndex,
|
|
h3cRTSubIfOrdinal
|
|
}
|
|
::= { h3cRTSubIfTable 1}
|
|
|
|
H3cRTSubIfEntry ::= SEQUENCE
|
|
{
|
|
h3cRTSubIfParentIfIndex Integer32,
|
|
h3cRTSubIfOrdinal Integer32,
|
|
h3cRTSubIfSubIfIndex Integer32,
|
|
h3cRTSubIfSubIfDesc DisplayString,
|
|
h3cRTSubIfRowStatus RowStatus
|
|
}
|
|
|
|
h3cRTSubIfParentIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parent interface index. The value should be the same as
|
|
h3cRTParentIfIndex."
|
|
::= { h3cRTSubIfEntry 1 }
|
|
|
|
h3cRTSubIfOrdinal OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ordinal of the subinterface. It should between
|
|
h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent
|
|
interface."
|
|
::= { h3cRTSubIfEntry 2 }
|
|
|
|
h3cRTSubIfSubIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the subinterface"
|
|
::= { h3cRTSubIfEntry 3 }
|
|
|
|
h3cRTSubIfSubIfDesc OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the interface"
|
|
::= { h3cRTSubIfEntry 4 }
|
|
|
|
h3cRTSubIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation status."
|
|
::= { h3cRTSubIfEntry 5 }
|
|
|
|
-- =================================================================
|
|
h3cIfLinkModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfLinkModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to get or set the link mode of an
|
|
interface.
|
|
According to the layer at which the device processes received
|
|
data packets, Ethernet interfaces can operate in bridge or route
|
|
mode."
|
|
::= { h3cIfControl 3 }
|
|
|
|
h3cIfLinkModeEntry OBJECT-TYPE
|
|
SYNTAX H3cIfLinkModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface link mode table entry"
|
|
INDEX
|
|
{
|
|
h3cIfLinkModeIndex
|
|
}
|
|
::= { h3cIfLinkModeTable 1}
|
|
|
|
H3cIfLinkModeEntry ::= SEQUENCE
|
|
{
|
|
h3cIfLinkModeIndex Integer32,
|
|
h3cIfLinkMode INTEGER,
|
|
h3cIfLinkModeSwitchSupport TruthValue
|
|
}
|
|
|
|
h3cIfLinkModeIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value is the same as ifIndex."
|
|
::= { h3cIfLinkModeEntry 1 }
|
|
|
|
|
|
h3cIfLinkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bridgeMode(1),
|
|
routeMode(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current link mode of the interface.
|
|
If h3cIfLinkModeSwitchSupport is true, writing to the object can
|
|
change the link mode of the interface."
|
|
::= { h3cIfLinkModeEntry 2 }
|
|
|
|
h3cIfLinkModeSwitchSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the interface supports link mode switching.
|
|
If this object is true, the interface can operate in either
|
|
bridge mode or route mode. Otherwise the interfaces can operate
|
|
only in bridge or route mode."
|
|
::= { h3cIfLinkModeEntry 3 }
|
|
|
|
-- =================================================================
|
|
h3cIfPortTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects to get or set the port type
|
|
of an interface."
|
|
::= { h3cIfControl 4 }
|
|
|
|
h3cIfPortTypeEntry OBJECT-TYPE
|
|
SYNTAX H3cIfPortTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface port type table entry."
|
|
INDEX
|
|
{
|
|
h3cIfPortTypeIndex
|
|
}
|
|
::= { h3cIfPortTypeTable 1}
|
|
|
|
H3cIfPortTypeEntry ::= SEQUENCE
|
|
{
|
|
h3cIfPortTypeIndex InterfaceIndex,
|
|
h3cIfPortType INTEGER
|
|
}
|
|
|
|
h3cIfPortTypeIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value is the same as ifIndex."
|
|
::= { h3cIfPortTypeEntry 1 }
|
|
|
|
h3cIfPortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
ethernet(2),
|
|
fc(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current port type of the interface.
|
|
Don't set the port type to other for an interface."
|
|
::= { h3cIfPortTypeEntry 2 }
|
|
|
|
-- =================================================================
|
|
h3cIfPfcDot1pTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfPfcDot1pEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table can set the inbound and outbound rate thresholds for the specified dot1p values."
|
|
::= { h3cIfControl 5 }
|
|
|
|
h3cIfPfcDot1pEntry OBJECT-TYPE
|
|
SYNTAX H3cIfPfcDot1pEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry items"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cIfPfcDot1pValue
|
|
}
|
|
::= { h3cIfPfcDot1pTable 1}
|
|
|
|
H3cIfPfcDot1pEntry ::= SEQUENCE
|
|
{
|
|
h3cIfPfcDot1pValue INTEGER,
|
|
h3cIfPfcDot1pInPps Unsigned32,
|
|
h3cIfPfcDot1pOutPps Unsigned32,
|
|
h3cIfPfcDot1pInPpsThreshold Unsigned32,
|
|
h3cIfPfcDot1pOutPpsThreshold Unsigned32
|
|
}
|
|
|
|
h3cIfPfcDot1pValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pri0(1),
|
|
pri1(2),
|
|
pri2(3),
|
|
pri3(4),
|
|
pri4(5),
|
|
pri5(6),
|
|
pri6(7),
|
|
pri7(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PFC dot1p value list."
|
|
::= { h3cIfPfcDot1pEntry 1 }
|
|
|
|
h3cIfPfcDot1pInPps OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current PFC dot1p for the inbound rate."
|
|
::= { h3cIfPfcDot1pEntry 2 }
|
|
|
|
h3cIfPfcDot1pOutPps OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current PFC dot1p for the outbound rate. "
|
|
::= { h3cIfPfcDot1pEntry 3 }
|
|
|
|
h3cIfPfcDot1pInPpsThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for the inbound rate.
|
|
If the h3cIfPfcDot1pInPpsThreshold is set to 0, no h3cIfPfcInRising will be generated."
|
|
::= { h3cIfPfcDot1pEntry 4 }
|
|
|
|
h3cIfPfcDot1pOutPpsThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for the outbound rate.
|
|
If the h3cIfPfcDot1pOutPpsThreshold is set to 0, no h3cIfPfcOutRising will be generated."
|
|
::= { h3cIfPfcDot1pEntry 5 }
|
|
|
|
-- =================================================================
|
|
h3cIfInterfaces OBJECT IDENTIFIER ::= { h3cIfExtGroup 3 }
|
|
|
|
h3cIfPhysicalNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of physical interfaces on the device."
|
|
::= { h3cIfInterfaces 1 }
|
|
|
|
h3cIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface entries. The number of entries is given by
|
|
the value of IfNumber."
|
|
::= { h3cIfInterfaces 2 }
|
|
|
|
h3cIfEntry OBJECT-TYPE
|
|
SYNTAX H3cIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing management information applicable to a
|
|
particular interface."
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfTable 1 }
|
|
|
|
H3cIfEntry ::= SEQUENCE
|
|
{
|
|
h3cIfUpDownTimes Integer32,
|
|
h3cIfMtu Integer32,
|
|
h3cIfBandwidthRate Integer32,
|
|
h3cIfDiscardPktRate Integer32,
|
|
h3cIfStatusKeepTime TimeTicks,
|
|
h3cIfInNUcastPkts Counter64,
|
|
h3cIfOutNUcastPkts Counter64,
|
|
h3cIfIsPoe TruthValue,
|
|
h3cIfOperStatus INTEGER,
|
|
h3cIfDownTimes Integer32,
|
|
h3cIfPfcStatus INTEGER,
|
|
h3cIfPfcDot1pNoDrop BITS,
|
|
h3cIfDescription DisplayString,
|
|
h3cIfFwdErrDiscards Unsigned32
|
|
}
|
|
|
|
h3cIfUpDownTimes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface's up/down times, since the device was initialized."
|
|
::= { h3cIfEntry 1 }
|
|
|
|
h3cIfMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the largest datagram that can be sent or received on the
|
|
interface, specified in octets. For interfaces that are used for
|
|
transmitting network datagram, this is the size of the largest network
|
|
datagram that can be sent on the interfaces."
|
|
::= { h3cIfEntry 2 }
|
|
|
|
h3cIfBandwidthRate OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of the bandwidth for an interface."
|
|
::= { h3cIfEntry 3 }
|
|
|
|
h3cIfDiscardPktRate OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of the discarded packets for an interface."
|
|
::= { h3cIfEntry 4 }
|
|
|
|
h3cIfStatusKeepTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since the interface
|
|
entered its current operational state."
|
|
::= { h3cIfEntry 5 }
|
|
|
|
h3cIfInNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of non-unicast (i.e., subnetwork-
|
|
broadcast or subnetwork-multicast) packets
|
|
delivered to a higher-layer protocol."
|
|
::= { h3cIfEntry 6 }
|
|
|
|
h3cIfOutNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a non-
|
|
unicast (i.e., a subnetwork-broadcast or
|
|
subnetwork-multicast) address."
|
|
::= { h3cIfEntry 7 }
|
|
|
|
h3cIfIsPoe OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the interface supports PoE."
|
|
::= { h3cIfEntry 8 }
|
|
|
|
h3cIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to forward packets
|
|
down(2),
|
|
testing(3), -- in a test mode
|
|
admindown(4) -- shut down by administrator
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current status of the interface. In testing state,
|
|
no operational packets can be forwarded. If ifAdminStatus
|
|
is down, h3cIfOperStatus should be admindown. If
|
|
ifAdminStatus is changed to up, h3cIfOperStatus should
|
|
change to up if the interface is ready to send and receive
|
|
network traffic; otherwise, it should stay in down state."
|
|
::= { h3cIfEntry 9 }
|
|
|
|
h3cIfDownTimes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the interface went down, since the device was initialized."
|
|
::= { h3cIfEntry 10 }
|
|
|
|
h3cIfPfcStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2),
|
|
auto(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pfc (Priority-based Flow Control) status.
|
|
Forcibly enable Pfc by enable(1).
|
|
Disable Pfc by disable(2).
|
|
Set Pfc to auto mode by auto(3).
|
|
In auto mode, the local end automatically negotiates
|
|
the Pfc status with its peer.
|
|
When congestion occurs in the network, the local device notifies
|
|
the peer to stop sending packets carrying the specified 802.1p
|
|
priority if all of the following conditions exist:
|
|
1. Both the local end and the remote end have Pfc enabled.
|
|
2. Both the local end and the remote end have the dot1p list specified
|
|
by h3cIfPfcDot1pNoDrop.
|
|
3. The specified 802.1p priority is in the dot1p list of h3cIfPfcDot1pNoDrop.
|
|
4. The local end receives a packet carrying the specified 802.1p priority."
|
|
DEFVAL { disable }
|
|
::= { h3cIfEntry 11 }
|
|
|
|
h3cIfPfcDot1pNoDrop OBJECT-TYPE
|
|
SYNTAX BITS { pri0(0), pri1(1), pri2(2), pri3(3), pri4(4), pri5(5), pri6(6), pri7(7) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pfc (Priority-based Flow Control) dot1q list,
|
|
bit 0 through bit 7 corresponding to priority 0 through priority 7.
|
|
See h3cIfPfcStatus."
|
|
DEFVAL{ { } }
|
|
::= { h3cIfEntry 12 }
|
|
|
|
h3cIfDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is also an 'alias' name for the interface specified by a
|
|
network manager, like the object of ifAlias. However, the size of
|
|
this object is larger than ifAlias. When this object is set to a
|
|
string of more than 64 characters, only the first 64 characters of the
|
|
object are read for the IfAlias object."
|
|
::= { h3cIfEntry 13 }
|
|
|
|
h3cIfFwdErrDiscards OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that were discarded when being forwarded."
|
|
::= { h3cIfEntry 14 }
|
|
|
|
h3cIfUsingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfUsingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing management information applicable to splitting
|
|
interfaces. To improve port density, reduce costs, and improve network
|
|
flexibility, a high-bandwidth interface can be split into multiple
|
|
low-bandwidth breakout interfaces, and the breakout interfaces can be
|
|
combined into a higher-bandwidth interface.
|
|
For example, a 40-GE interface can be split into four 10-GE breakout
|
|
interfaces. After the operation takes effect on a 40-GE interface, the
|
|
system deletes the 40-GE interface and creates four 10-GE breakout
|
|
interfaces."
|
|
::= { h3cIfInterfaces 3 }
|
|
|
|
h3cIfUsingEntry OBJECT-TYPE
|
|
SYNTAX H3cIfUsingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of h3cIfUsingTable."
|
|
INDEX { h3cIfUsingIndex }
|
|
::= { h3cIfUsingTable 1 }
|
|
|
|
H3cIfUsingEntry ::= SEQUENCE
|
|
{
|
|
h3cIfUsingIndex Integer32,
|
|
h3cIfUsingSupportType Integer32,
|
|
h3cIfUsingType INTEGER,
|
|
h3cIfUsingStatus INTEGER
|
|
}
|
|
|
|
h3cIfUsingIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of an interface that can be split into multiple low-bandwidth
|
|
breakout interfaces or be restored to a high-bandwidth interface."
|
|
::= { h3cIfUsingEntry 1 }
|
|
|
|
h3cIfUsingSupportType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the port type which can be split into or restored to.
|
|
From lowest bit, each bit corresponds to a port type ('10GE', '20GE',
|
|
'40GE', '100GE', '25GE', '50GE').
|
|
For example, value 3 means this object can be split into 10GE or 20GE,
|
|
value 4 means this object can be split into 40GE, or can be restored to
|
|
40GE."
|
|
::= { h3cIfUsingEntry 2 }
|
|
|
|
h3cIfUsingType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noUsing(0),
|
|
using10GE(1),
|
|
using20GE(2),
|
|
using40GE(3),
|
|
using100GE(4),
|
|
using25GE(5),
|
|
using50GE(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the port type that can be split into or restored to.
|
|
|
|
After this object is set to a non-zero value, the operation returns
|
|
success in the following cases:
|
|
1. The original instance still exists and is read as a non-zero value.
|
|
In this case, object h3cIfUsingStatus change to needReboot(1),
|
|
which means that you need to reboot the line card (for distributed
|
|
devices) or device (for centralized devices) where the port is
|
|
located to make the operation take effect.
|
|
Set this object to noUsing(0) for cancelling the operation.
|
|
2. The operation takes effect immediately.
|
|
Original instance is deleted and new instance is created while the
|
|
operation takes effect."
|
|
::= { h3cIfUsingEntry 3 }
|
|
|
|
h3cIfUsingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noUsing(0),
|
|
needReboot(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" After object h3cIfUsingType is set to a non-zero value, the value
|
|
for this object is needReboot(1) until you reboot the line card (for
|
|
distributed devices) or device (for centralized devices) where the
|
|
port is located."
|
|
::= { h3cIfUsingEntry 4 }
|
|
|
|
--
|
|
-- Notification definitions
|
|
--
|
|
-- =================================================================
|
|
-- Traps are defined below.
|
|
|
|
h3cIfExtTrap OBJECT IDENTIFIER ::= { h3cIfExt 3 }
|
|
h3cIfExtTrapPrex OBJECT IDENTIFIER ::= { h3cIfExtTrap 0 }
|
|
-- All trap definitions should be placed under this object.
|
|
|
|
h3cIfBandwidthUsageHigh NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifDescr,
|
|
h3cIfBandwidthRate,
|
|
h3cIfBandwidthUpperLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the rate of the bandwidth for the
|
|
interface exceeds the upper limit."
|
|
::= { h3cIfExtTrapPrex 1 }
|
|
|
|
h3cIfDiscardPktRateHigh NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifDescr,
|
|
h3cIfDiscardPktRate,
|
|
h3cIfDiscardPktRateUpperLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the rate of the discarded packets
|
|
for the interface exceeds the upper limit."
|
|
::= { h3cIfExtTrapPrex 2 }
|
|
|
|
h3cIfDampeningSuppressed NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the interface is suppressed
|
|
via dampening."
|
|
::= { h3cIfExtTrapPrex 3 }
|
|
|
|
h3cIfDampeningNotSuppressed NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the interface is resumed to
|
|
not suppressed via dampening."
|
|
::= { h3cIfExtTrapPrex 4 }
|
|
|
|
h3cIfPortUp NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when physical state of the interface changes to up."
|
|
::= { h3cIfExtTrapPrex 5 }
|
|
|
|
h3cIfPortDown NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when physical state of the interface changes to down."
|
|
::= { h3cIfExtTrapPrex 6 }
|
|
|
|
h3cIfPfcOutRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfPfcDot1pValue,
|
|
h3cIfPfcDot1pOutPps,
|
|
h3cIfPfcDot1pOutPpsThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the outbound rate exceeds the threshold for the dot1p value.
|
|
If the h3cIfPfcDot1pOutPpsThreshold is set to 0, no h3cIfPfcOutRising will be generated."
|
|
::= { h3cIfExtTrapPrex 7 }
|
|
|
|
h3cIfPfcInRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfPfcDot1pValue,
|
|
h3cIfPfcDot1pInPps,
|
|
h3cIfPfcDot1pInPpsThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the inbound rate exceeds the threshold for the dot1p value.
|
|
If the h3cIfPfcDot1pInPpsThreshold is set to 0, no h3cIfPfcInRising will be generated."
|
|
::= { h3cIfExtTrapPrex 8 }
|
|
|
|
h3cIfExtTrapObject OBJECT IDENTIFIER ::= { h3cIfExtTrap 1 }
|
|
|
|
h3cIfExtTrapCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfExtTrapCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap configuration table."
|
|
::= { h3cIfExtTrapObject 1 }
|
|
|
|
h3cIfExtTrapCfgEntry OBJECT-TYPE
|
|
SYNTAX H3cIfExtTrapCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for this table."
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfExtTrapCfgTable 1 }
|
|
|
|
H3cIfExtTrapCfgEntry ::= SEQUENCE
|
|
{
|
|
h3cIfBandwidthUpperLimit Integer32,
|
|
h3cIfDiscardPktRateUpperLimit Integer32
|
|
}
|
|
|
|
h3cIfBandwidthUpperLimit OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of the bandwidth upper limit for an interface."
|
|
::= { h3cIfExtTrapCfgEntry 1 }
|
|
|
|
h3cIfDiscardPktRateUpperLimit OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of the discarded packets upper limit for an interface."
|
|
::= { h3cIfExtTrapCfgEntry 2 }
|
|
|
|
-- =================================================================
|
|
h3cIfMonScalarGroup OBJECT IDENTIFIER ::= { h3cIfExt 4 }
|
|
|
|
-- =================================================================
|
|
-- All other groups are defined below. Of course, scalar objects can
|
|
-- also be defined in a subsection, but they must be one part of
|
|
-- that subsection.
|
|
|
|
-- Note that a scalar group should be defined firstly and all
|
|
-- scalar objects are placed under that group when doing so.
|
|
|
|
h3cIfMonGroup OBJECT IDENTIFIER ::= { h3cIfExt 5 }
|
|
|
|
-- =================================================================
|
|
h3cIfMonStat OBJECT IDENTIFIER ::= { h3cIfMonGroup 1 }
|
|
|
|
h3cIfMonStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfMonStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is about some types of statistics."
|
|
::= { h3cIfMonStat 1}
|
|
|
|
h3cIfMonStatEntry OBJECT-TYPE
|
|
SYNTAX H3cIfMonStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry items."
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfMonStatTable 1}
|
|
|
|
H3cIfMonStatEntry ::= SEQUENCE
|
|
{
|
|
h3cIfMonInputRateStatistics Counter64,
|
|
h3cIfMonOutputRateStatistics Counter64,
|
|
h3cIfMonInputErrorAlarmStatistics Counter64,
|
|
h3cIfMonOutputErrorAlarmStatistics Counter64,
|
|
h3cIfMonSdhErrorStatistics Counter64,
|
|
h3cIfMonSdhB1ErrorStatistics Counter64,
|
|
h3cIfMonSdhB2ErrorStatistics Counter64,
|
|
h3cIfMonCRCErrorStatistics Counter64,
|
|
h3cIfMonPauseFrameStatistics Counter64,
|
|
h3cIfMonTxPauseFrameStatistics Counter64
|
|
}
|
|
h3cIfMonInputRateStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the inbound bandwidth."
|
|
::= { h3cIfMonStatEntry 1 }
|
|
|
|
h3cIfMonOutputRateStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the outbound bandwidth."
|
|
::= { h3cIfMonStatEntry 2 }
|
|
|
|
h3cIfMonInputErrorAlarmStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of inbound error packets."
|
|
::= { h3cIfMonStatEntry 3 }
|
|
|
|
h3cIfMonOutputErrorAlarmStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of outbound error packets."
|
|
::= { h3cIfMonStatEntry 4 }
|
|
|
|
h3cIfMonSdhErrorStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of SDH error packets."
|
|
::= { h3cIfMonStatEntry 5 }
|
|
|
|
h3cIfMonSdhB1ErrorStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of SDH B1 error packets."
|
|
::= { h3cIfMonStatEntry 6 }
|
|
|
|
h3cIfMonSdhB2ErrorStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of SDH B2 error packets."
|
|
::= { h3cIfMonStatEntry 7 }
|
|
|
|
h3cIfMonCRCErrorStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of CRC error packets. "
|
|
::= { h3cIfMonStatEntry 8}
|
|
|
|
h3cIfMonPauseFrameStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of pause frames."
|
|
::= { h3cIfMonStatEntry 9}
|
|
|
|
h3cIfMonTxPauseFrameStatistics OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics about the number of Tx-pause frames."
|
|
::= { h3cIfMonStatEntry 10}
|
|
|
|
-- =================================================================
|
|
h3cIfMonControl OBJECT IDENTIFIER ::= { h3cIfMonGroup 2 }
|
|
|
|
h3cIfMonThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfMonThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is about the upper threshold,low-er threshold, and inspection interval. "
|
|
::= { h3cIfMonControl 1 }
|
|
|
|
h3cIfMonThresholdEntry OBJECT-TYPE
|
|
SYNTAX H3cIfMonThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry items."
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfMonThresholdTable 1}
|
|
|
|
H3cIfMonThresholdEntry ::= SEQUENCE
|
|
{
|
|
h3cIfMonInputRateLowThres Unsigned32,
|
|
h3cIfMonInputRateHighThres Unsigned32,
|
|
h3cIfMonOutputRateLowThres Unsigned32,
|
|
h3cIfMonOutputRateHighThres Unsigned32,
|
|
h3cIfMonInputErrorAlarmLowThres Unsigned32,
|
|
h3cIfMonInputErrorAlarmHighThres Unsigned32,
|
|
h3cIfMonInputErrorAlarmInterval Unsigned32,
|
|
h3cIfMonOutputErrorAlarmLowThres Unsigned32,
|
|
h3cIfMonOutputErrorAlarmHighThres Unsigned32,
|
|
h3cIfMonOutputErrorAlarmInterval Unsigned32,
|
|
h3cIfMonSdhErrorLowThres Unsigned32,
|
|
h3cIfMonSdhErrorHighThres Unsigned32,
|
|
h3cIfMonSdhErrorInterval Unsigned32,
|
|
h3cIfMonSdhB1ErrorLowThres Unsigned32,
|
|
h3cIfMonSdhB1ErrorHighThres Unsigned32,
|
|
h3cIfMonSdhB1ErrorInterval Unsigned32,
|
|
h3cIfMonSdhB2ErrorLowThres Unsigned32,
|
|
h3cIfMonSdhB2ErrorHighThres Unsigned32,
|
|
h3cIfMonSdhB2ErrorInterval Unsigned32,
|
|
h3cIfMonCRCErrorLowThres Unsigned32,
|
|
h3cIfMonCRCErrorHighThres Unsigned32,
|
|
h3cIfMonCRCErrorInterval Unsigned32,
|
|
h3cIfMonCRCErrType INTEGER,
|
|
h3cIfMonPauseFrameLowThres Unsigned32,
|
|
h3cIfMonPauseFrameHighThres Unsigned32,
|
|
h3cIfMonPauseFrameInterval Unsigned32,
|
|
h3cIfMonTxPauseFrameLowThres Unsigned32,
|
|
h3cIfMonTxPauseFrameHighThres Unsigned32,
|
|
h3cIfMonTxPauseFrameInterval Unsigned32
|
|
}
|
|
|
|
h3cIfMonInputRateLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low threshold for the inbound bandwidth."
|
|
DEFVAL { 80 }
|
|
::= { h3cIfMonThresholdEntry 1 }
|
|
|
|
h3cIfMonInputRateHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the inbound bandwidth."
|
|
DEFVAL { 90 }
|
|
::= { h3cIfMonThresholdEntry 2 }
|
|
|
|
h3cIfMonOutputRateLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the outbound bandwidth."
|
|
DEFVAL { 80 }
|
|
::= { h3cIfMonThresholdEntry 3 }
|
|
|
|
h3cIfMonOutputRateHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the outbound bandwidth."
|
|
DEFVAL { 90 }
|
|
::= { h3cIfMonThresholdEntry 4 }
|
|
|
|
h3cIfMonInputErrorAlarmLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of inbound error packets."
|
|
DEFVAL { 100 }
|
|
::= { h3cIfMonThresholdEntry 5 }
|
|
|
|
h3cIfMonInputErrorAlarmHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of inbound error packets."
|
|
DEFVAL { 1000 }
|
|
::= { h3cIfMonThresholdEntry 6 }
|
|
|
|
h3cIfMonInputErrorAlarmInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of inbound error packets."
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 7 }
|
|
|
|
h3cIfMonOutputErrorAlarmLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of outbound error packets."
|
|
DEFVAL { 100 }
|
|
::= { h3cIfMonThresholdEntry 8 }
|
|
|
|
h3cIfMonOutputErrorAlarmHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of outbound error packets."
|
|
DEFVAL { 1000 }
|
|
::= { h3cIfMonThresholdEntry 9 }
|
|
|
|
h3cIfMonOutputErrorAlarmInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of outbound error packets."
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 10 }
|
|
|
|
h3cIfMonSdhErrorLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of SDH error packets."
|
|
DEFVAL { 100 }
|
|
::= { h3cIfMonThresholdEntry 11 }
|
|
|
|
h3cIfMonSdhErrorHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of SDH error packets."
|
|
DEFVAL { 1000 }
|
|
::= { h3cIfMonThresholdEntry 12 }
|
|
|
|
h3cIfMonSdhErrorInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of SDH error packets."
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 13 }
|
|
|
|
h3cIfMonSdhB1ErrorLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of SDH B1 error packets."
|
|
::= { h3cIfMonThresholdEntry 14 }
|
|
|
|
h3cIfMonSdhB1ErrorHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of SDH B1 error packets."
|
|
DEFVAL { 1000 }
|
|
::= { h3cIfMonThresholdEntry 15 }
|
|
|
|
h3cIfMonSdhB1ErrorInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of SDH B1 error packets. "
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 16 }
|
|
|
|
h3cIfMonSdhB2ErrorLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of SDH B2 error packets."
|
|
::= { h3cIfMonThresholdEntry 17 }
|
|
|
|
h3cIfMonSdhB2ErrorHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of SDH B2 error packets."
|
|
DEFVAL { 1000 }
|
|
::= { h3cIfMonThresholdEntry 18 }
|
|
|
|
h3cIfMonSdhB2ErrorInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of SDH B2 error packets."
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 19 }
|
|
|
|
h3cIfMonCRCErrorLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of CRC error packets."
|
|
::= { h3cIfMonThresholdEntry 20 }
|
|
|
|
h3cIfMonCRCErrorHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of CRC error packets."
|
|
::= { h3cIfMonThresholdEntry 21 }
|
|
|
|
h3cIfMonCRCErrorInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of CRC error packets."
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 22 }
|
|
|
|
h3cIfMonCRCErrType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
absolute(1),
|
|
ratio(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Inspection type for the CRC error packets."
|
|
::= { h3cIfMonThresholdEntry 23 }
|
|
|
|
h3cIfMonPauseFrameLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of inbound pause frames."
|
|
::= { h3cIfMonThresholdEntry 24 }
|
|
|
|
h3cIfMonPauseFrameHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of inbound pause frames."
|
|
::= { h3cIfMonThresholdEntry 25 }
|
|
|
|
h3cIfMonPauseFrameInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of inbound pause frames."
|
|
::= { h3cIfMonThresholdEntry 26 }
|
|
|
|
h3cIfMonTxPauseFrameLowThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower threshold for the number of inbound Tx-pause frames."
|
|
DEFVAL { 100 }
|
|
::= { h3cIfMonThresholdEntry 27 }
|
|
|
|
h3cIfMonTxPauseFrameHighThres OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper threshold for the number of inbound Tx-pause frames."
|
|
DEFVAL { 500 }
|
|
::= { h3cIfMonThresholdEntry 28 }
|
|
|
|
h3cIfMonTxPauseFrameInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inspection interval for the number of inbound Tx-pause frames."
|
|
DEFVAL { 10 }
|
|
::= { h3cIfMonThresholdEntry 29 }
|
|
|
|
-- =================================================================
|
|
h3cIfMonAlarmDownEnableTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cIfMonAlarmDownEnableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table can set or get whether to enable the interface down function."
|
|
::= { h3cIfMonControl 2 }
|
|
|
|
h3cIfMonAlarmDownEnableEntry OBJECT-TYPE
|
|
SYNTAX H3cIfMonAlarmDownEnableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry items"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cIfMonAlarmDownEnableTable 1}
|
|
|
|
H3cIfMonAlarmDownEnableEntry ::= SEQUENCE
|
|
{
|
|
h3cIfMonInputRateEnableDown TruthValue,
|
|
h3cIfMonOutputRateEnableDown TruthValue,
|
|
h3cIfMonInputErrorAlarmEnableDown TruthValue,
|
|
h3cIfMonOutputErrorAlarmEnableDown TruthValue,
|
|
h3cIfMonSdhErrorEnableDown TruthValue,
|
|
h3cIfMonSdhB1ErrorEnableDown TruthValue,
|
|
h3cIfMonSdhB2ErrorEnableDown TruthValue,
|
|
h3cIfMonCRCErrorEnableDown TruthValue,
|
|
h3cIfMonPauseFrameEnableDown TruthValue,
|
|
h3cIfMonTxPauseFrameEnableDown TruthValue
|
|
}
|
|
|
|
h3cIfMonInputRateEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the inbound bandwidth exceeds the upper threshold,the physical
|
|
interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 1 }
|
|
|
|
h3cIfMonOutputRateEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the outbound bandwidth exceeds the upper threshold,the physical
|
|
interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 2 }
|
|
|
|
h3cIfMonInputErrorAlarmEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of inbound error packets-exceeds the upper threshold,
|
|
the physical interface goes down. "
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 3 }
|
|
|
|
h3cIfMonOutputErrorAlarmEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of outbound error packets-exceeds the upper threshold,
|
|
the physical interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 4 }
|
|
|
|
h3cIfMonSdhErrorEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of SDH error packets-exceeds the upper threshold,
|
|
the physical interface goes down. "
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 5 }
|
|
|
|
h3cIfMonSdhB1ErrorEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of SDH B1 error packets-exceeds the upper threshold,
|
|
the physical interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 6 }
|
|
|
|
h3cIfMonSdhB2ErrorEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of SDH B2 error packets-exceeds the upper threshold,
|
|
the physical interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 7 }
|
|
|
|
h3cIfMonCRCErrorEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of CRC error packets-exceeds the upper threshold,
|
|
the physical interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 8 }
|
|
|
|
h3cIfMonPauseFrameEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of inbound pause frames exceeds the upper threshold,
|
|
the physical interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 9 }
|
|
|
|
h3cIfMonTxPauseFrameEnableDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the number of inbound Tx-pause frames exceeds the upper threshold,
|
|
the physical interface goes down."
|
|
DEFVAL { false }
|
|
::= { h3cIfMonAlarmDownEnableEntry 10 }
|
|
|
|
-- =================================================================
|
|
-- Traps are defined below.
|
|
|
|
h3cIfMonTrap OBJECT IDENTIFIER ::= { h3cIfExt 6 }
|
|
h3cIfMonTrapPrex OBJECT IDENTIFIER ::= { h3cIfMonTrap 0 }
|
|
-- All trap definitions should be placed under this object.
|
|
|
|
h3cIfMonInputRateRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonInputRateLowThres,
|
|
h3cIfMonInputRateHighThres,
|
|
h3cIfMonInputRateStatistics
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the inbound bandwidth exceeds the
|
|
upper threshold."
|
|
::= { h3cIfMonTrapPrex 1 }
|
|
|
|
h3cIfMonInputRateResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonInputRateLowThres,
|
|
h3cIfMonInputRateHighThres,
|
|
h3cIfMonInputRateStatistics
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the inbound bandwidth drops from
|
|
above the upper threshold to below the lower threshold."
|
|
::= { h3cIfMonTrapPrex 2 }
|
|
|
|
h3cIfMonOutputRateRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonOutputRateLowThres,
|
|
h3cIfMonOutputRateHighThres,
|
|
h3cIfMonOutputRateStatistics
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the outbound bandwidth exceeds the
|
|
upper threshold."
|
|
::= { h3cIfMonTrapPrex 3 }
|
|
|
|
h3cIfMonOutputRateResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonOutputRateLowThres,
|
|
h3cIfMonOutputRateHighThres,
|
|
h3cIfMonOutputRateStatistics
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the outbound bandwidth drops from
|
|
above the upper threshold to below the lower threshold."
|
|
::= { h3cIfMonTrapPrex 4 }
|
|
|
|
h3cIfMonInputErrorAlarmRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonInputErrorAlarmHighThres,
|
|
h3cIfMonInputErrorAlarmLowThres,
|
|
h3cIfMonInputErrorAlarmStatistics,
|
|
h3cIfMonInputErrorAlarmInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of inbound error packets exceeds the
|
|
upper threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 5 }
|
|
|
|
h3cIfMonInputErrorAlarmResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonInputErrorAlarmHighThres,
|
|
h3cIfMonInputErrorAlarmLowThres,
|
|
h3cIfMonInputErrorAlarmStatistics,
|
|
h3cIfMonInputErrorAlarmInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of inbound error packets drops from
|
|
above the upper threshold to below the lower threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 6 }
|
|
|
|
h3cIfMonOutputErrorAlarmRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonOutputErrorAlarmHighThres,
|
|
h3cIfMonOutputErrorAlarmLowThres,
|
|
h3cIfMonOutputErrorAlarmStatistics,
|
|
h3cIfMonOutputErrorAlarmInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of outbound error packets exceeds the
|
|
upper threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 7 }
|
|
|
|
h3cIfMonOutputErrorAlarmResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonOutputErrorAlarmHighThres,
|
|
h3cIfMonOutputErrorAlarmLowThres,
|
|
h3cIfMonOutputErrorAlarmStatistics,
|
|
h3cIfMonOutputErrorAlarmInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of outbound error packets drops from
|
|
above the upper threshold to below the lower threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 8 }
|
|
|
|
h3cIfMonSdhErrorRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonSdhErrorLowThres,
|
|
h3cIfMonSdhErrorHighThres,
|
|
h3cIfMonSdhErrorStatistics,
|
|
h3cIfMonSdhErrorInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of SDH error packets exceeds
|
|
the upper threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 9 }
|
|
|
|
h3cIfMonSdhErrorResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonSdhErrorLowThres,
|
|
h3cIfMonSdhErrorHighThres,
|
|
h3cIfMonSdhErrorStatistics,
|
|
h3cIfMonSdhErrorInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of SDH error packets drops from
|
|
above the upper threshold to below the lower threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 10 }
|
|
|
|
h3cIfMonSdhB1ErrorRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonSdhB1ErrorLowThres,
|
|
h3cIfMonSdhB1ErrorHighThres,
|
|
h3cIfMonSdhB1ErrorStatistics,
|
|
h3cIfMonSdhB1ErrorInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of SDH B1 error packets exceeds
|
|
the upper threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 11 }
|
|
|
|
h3cIfMonSdhB1ErrorResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonSdhB1ErrorLowThres,
|
|
h3cIfMonSdhB1ErrorHighThres,
|
|
h3cIfMonSdhB1ErrorStatistics,
|
|
h3cIfMonSdhB1ErrorInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of SDH B1 error packets drops from
|
|
above the upper threshold to below the lower threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 12 }
|
|
|
|
h3cIfMonSdhB2ErrorRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonSdhB2ErrorLowThres,
|
|
h3cIfMonSdhB2ErrorHighThres,
|
|
h3cIfMonSdhB2ErrorStatistics,
|
|
h3cIfMonSdhB2ErrorInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of SDH B2 error packets exceeds
|
|
the upper threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 13 }
|
|
|
|
h3cIfMonSdhB2ErrorResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonSdhB2ErrorLowThres,
|
|
h3cIfMonSdhB2ErrorHighThres,
|
|
h3cIfMonSdhB2ErrorStatistics,
|
|
h3cIfMonSdhB2ErrorInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of SDH B2 error packets drops from
|
|
above the upper threshold to below the lower threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 14 }
|
|
|
|
h3cIfMonCRCErrorRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonCRCErrorHighThres,
|
|
h3cIfMonCRCErrorLowThres,
|
|
h3cIfMonCRCErrorStatistics,
|
|
h3cIfMonCRCErrorInterval,
|
|
h3cIfMonCRCErrType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of CRC error packets exceeds
|
|
the upper threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 15 }
|
|
|
|
h3cIfMonCRCErrorResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonCRCErrorHighThres,
|
|
h3cIfMonCRCErrorLowThres,
|
|
h3cIfMonCRCErrorStatistics,
|
|
h3cIfMonCRCErrorInterval,
|
|
h3cIfMonCRCErrType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of CRC error packets drops from
|
|
above the upper threshold to below the lower threshold within the default interval."
|
|
::= { h3cIfMonTrapPrex 16 }
|
|
|
|
h3cIfMonPauseFrameRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonPauseFrameHighThres,
|
|
h3cIfMonPauseFrameLowThres,
|
|
h3cIfMonPauseFrameStatistics,
|
|
h3cIfMonPauseFrameInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of inbound pause frames exceeds the
|
|
upper threshold."
|
|
::= { h3cIfMonTrapPrex 17 }
|
|
|
|
h3cIfMonPauseFrameResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonPauseFrameHighThres,
|
|
h3cIfMonPauseFrameLowThres,
|
|
h3cIfMonPauseFrameStatistics,
|
|
h3cIfMonPauseFrameInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of inbound pause frames drops from
|
|
above the upper threshold to below the lower-threshold."
|
|
::= { h3cIfMonTrapPrex 18 }
|
|
|
|
h3cIfMonTxPauseFrameRising NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonTxPauseFrameHighThres,
|
|
h3cIfMonTxPauseFrameLowThres,
|
|
h3cIfMonTxPauseFrameStatistics,
|
|
h3cIfMonTxPauseFrameInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of inbound Tx-pause frames exceeds
|
|
the upper threshold."
|
|
::= { h3cIfMonTrapPrex 19 }
|
|
|
|
h3cIfMonTxPauseFrameResume NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cIfMonTxPauseFrameHighThres,
|
|
h3cIfMonTxPauseFrameLowThres,
|
|
h3cIfMonTxPauseFrameStatistics,
|
|
h3cIfMonTxPauseFrameInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is generated when the number of inbound Tx-pause frames drops from
|
|
above the upper threshold to below the lower threshold."
|
|
::= { h3cIfMonTrapPrex 20 }
|
|
|
|
h3cIfMonTrapObject OBJECT IDENTIFIER ::= { h3cIfMonTrap 1 }
|
|
|
|
END
|