Observium_CE/mibs/cisco/BASIS-RAS-DISK-MIB

168 lines
4.6 KiB
Plaintext

-- *****************************************************************
-- BASIS-RAS-DISK-MIB
--
-- June 2002
--
-- Copyright (c) 1996-1998, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- LAST-UPDATED "200206030000Z"
-- DESCRIPTION "This MIB contains information on the
-- Disk Related Objects for MGX8220."
--
-- REVISION "200206030000Z"
-- DESCRIPTION
-- "Added Cisco Copyrights to the MIB."
--
BASIS-RAS-DISK-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
axisDiagnostics FROM BASIS-MIB;
rasDsk OBJECT IDENTIFIER ::= { axisDiagnostics 2 }
-- ----------------------------------------------------------------------
--
-- Group "axisDiagnostics"
-- This group contains information pertained to RAS Disk diagnostics in
-- AXIS.
--
-- ----------------------------------------------------------------------
rasDskStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the RAS Disk diagnostics has been
Enabled or not.
"
DEFVAL { disable }
::= { rasDsk 1 }
dskHealth OBJECT-TYPE
SYNTAX INTEGER {
pass (1),
fail (2),
unknown (3),
testInProgress (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the Status of the Hard Disk, which depends on the
number of corrupted files and number of Bad sectors in
the ASC. The Status is PASS if there are no Corrupted
files in the Disk AND the number of Bad Sectors is within
the threshold value. If the Disk has one or more
Corrupted files OR if the Number of Bad Sectors exceeds
the threshold value, the Status is FAIL. If Diagnostics
is going on, the Status is TestInProgress. Status will be
UNKNOWN until the diagnostics starts for the first time.
"
DEFVAL { unknown }
::= { rasDsk 2 }
standbyDskHealth OBJECT-TYPE
SYNTAX INTEGER {
pass (1),
fail (2),
unknown (3),
testInProgress (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the Status of the Standby ASC Hard Disk, which
depends on the number of corrupted files and number of
Bad sectors in the Standby ASC. The Status is UNKNOWN, if
there is no Standby ASC in the shelf.
"
DEFVAL { unknown }
::= { rasDsk 3 }
wakeupInterval OBJECT-TYPE
SYNTAX INTEGER (12..168)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the RAS Disk diagnostics task Wake up time
period, in HOURS. This Interval is configurable between
12 hours and 7 days. If RAS Disk diagnostics is Enabled,
the diagnostics starts whenever the wakeupInterval is
elapsed. If RAS Disk diagnostics is Enabled AND if the
CLI cnfrasdsk is executed, then the Disk diagnostics
starts immediately.
"
DEFVAL { 12 }
::= { rasDsk 4 }
lastTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows the Time when the RAS Disk diagnostics was
Last done. The format is DD MONTH HH:MM:SS.
"
::= { rasDsk 5 }
numBadSectors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Number of Bad Sectors found in the Disk.
"
DEFVAL { 0 }
::= { rasDsk 6 }
crptdPRIfiles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Number of SM configuration files,
corrupted.
"
DEFVAL { 0 }
::= { rasDsk 7 }
crptdFWfiles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Number of FirmWare files, corrupted.
"
DEFVAL { 0 }
::= { rasDsk 8 }
END