-- ***************************************************************** -- QTECH-TIME-MIB.mib: Qtech Time MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-TIME-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString, RowStatus, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF qtechMgmt FROM QTECH-SMI; qtechTimeMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech time mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 15} qtechTimeMIBObjects OBJECT IDENTIFIER ::= { qtechTimeMIB 1 } qtechClockDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The current local date and time for the system. Setting this object is equivalent to setting an automated clock and calendar. The value of the object will track the date and time from the value set. Note that due to hardware limitations some systems may not be able to preserve such meaning across reboots of the system, as indicated by csyClockLostOnReboot. A constant value of all zeros and length 8 indicates the system is not aware of the present date and time." ::= { qtechTimeMIBObjects 1 } qtechClockWeek OBJECT-TYPE SYNTAX INTEGER(1..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicate that which day currunt time of system indicate. e.g. 1 indicate Monday£¬7 indicate Sunday" ::= { qtechTimeMIBObjects 2 } qtechTimeRangeMIBObjects OBJECT IDENTIFIER ::= { qtechTimeMIB 2} -- -- Time/scheduling range filter table -- qtechTimeRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table of filters which can be used to effectively enable or disable policies based on a valid time range." ::= { qtechTimeRangeMIBObjects 1} qtechTimeRangeEntry OBJECT-TYPE SYNTAX QtechTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given time range for which a policy may be filtered on to place the rule active or inactive." INDEX { qtechTimeRangeName } ::= { qtechTimeRangeTable 1 } QtechTimeRangeEntry ::= SEQUENCE { qtechTimeRangeName DisplayString, qtechTimeRangePeriodQtech DateAndTime, qtechTimeRangePeriodEnd DateAndTime, qtechTimeRangeRowStatus RowStatus } qtechTimeRangeName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administratively assigned name for this time range. This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { qtechTimeRangeEntry 1 } qtechTimeRangePeriodQtech OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The qteching time period for this filter. In addition to a normal DateAndTime string, this object may be set to the OCTET STRING value THISANDPRIOR which indicates that the filter is valid from any time before now up until (at least) now." DEFVAL { '0000010100000000'H } ::= { qtechTimeRangeEntry 2 } qtechTimeRangePeriodEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The ending time period for this filter. In addition to a normal DateAndTime string, this object may be set to the OCTET STRING value THISANDFUTURE which indicates that the filter is valid without an ending date and/or time." DEFVAL { '9999123123595909'H } ::= { qtechTimeRangeEntry 3 } qtechTimeRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the conceptual status of this row." ::= { qtechTimeRangeEntry 4 } -- -- Time range periodic filter table -- qtechTimeRangePeriodicTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechTimeRangePeriodicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table of periodic time filters in the time-range." ::= { qtechTimeRangeMIBObjects 2 } qtechTimeRangePeriodicEntry OBJECT-TYPE SYNTAX QtechTimeRangePeriodicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given periodic time limit for the time-range." INDEX { qtechTimeRangePeriodicTRName } ::= { qtechTimeRangePeriodicTable 1 } QtechTimeRangePeriodicEntry ::= SEQUENCE { qtechTimeRangePeriodicTRName DisplayString, qtechTimeRangePeriodicIndex Integer32, qtechTimeRangePeriodicType INTEGER, qtechTimeRangePeriodicQtechWeekDay OCTET STRING, qtechTimeRangePeriodicEndWeekDay INTEGER, qtechTimeRangePeriodicTimeOfDayQtech DateAndTime, qtechTimeRangePeriodicTimeOfDayEnd DateAndTime, qtechTimeRangePeriodicRowStatus RowStatus } qtechTimeRangePeriodicTRName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Time-range name which this periodic time filter belong to. This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { qtechTimeRangePeriodicEntry 1 } qtechTimeRangePeriodicIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Object which specifies a unique entry in the qtechTimeRangePeriodicTable. A management station wishing to initiate a entry operation should use a pseudo-random value for this object when creating or modifying an instance of a entry. The RowStatus semantics of the entry object will prevent access conflicts." ::= { qtechTimeRangePeriodicEntry 2 } qtechTimeRangePeriodicType OBJECT-TYPE SYNTAX INTEGER{ fixed-segment(1), -- Fixed time period, defined by the entry, which is in one or several days. unfixed-segment(2) -- Unfixed time period, defined by the entry, which is one or several days in a week. } MAX-ACCESS read-create STATUS current DESCRIPTION "Type defined by the time period in the entry." ::= { qtechTimeRangePeriodicEntry 3 } qtechTimeRangePeriodicQtechWeekDay OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "The start day in a week of the time period. Every bit in this byte stands for one day in a week. The lowest bit(the 1st bit from the right) stands for monday. One by one to the left Tuesday, wednesday,thursday, friday,saturday, sunday are. The highest bit(the 1st bit from the left) always be 0. 1 means the day represented by the bit is included." DEFVAL {'fe'H} ::= { qtechTimeRangePeriodicEntry 4 } qtechTimeRangePeriodicEndWeekDay OBJECT-TYPE SYNTAX INTEGER{ monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6), sunday(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The end day in a week of the time period. When qtechTimeRangePeriodicType is 'fixed-segment', this field is insignificant." ::= { qtechTimeRangePeriodicEntry 5 } qtechTimeRangePeriodicTimeOfDayQtech OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The start time of the time period. In fact, only time in DateAndTime is meaningful." ::= { qtechTimeRangePeriodicEntry 6 } qtechTimeRangePeriodicTimeOfDayEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The end time of the time period. In fact, only time in DateAndTime is meaningful." ::= { qtechTimeRangePeriodicEntry 7 } qtechTimeRangePeriodicRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the conceptual status of this row" ::= { qtechTimeRangePeriodicEntry 8 } qtechTimeMIBConformance OBJECT IDENTIFIER ::= { qtechTimeMIB 3 } qtechTimeMIBCompliances OBJECT IDENTIFIER ::= { qtechTimeMIBConformance 1 } qtechTimeMIBGroups OBJECT IDENTIFIER ::= { qtechTimeMIBConformance 2 } -- compliance statements qtechTimeMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Qtech Time MIB" MODULE -- this module GROUP qtechTimeMIBGroup DESCRIPTION "This group is mandatory for device which support RTC." GROUP qtechTimeRangeMIBGroup DESCRIPTION "This group is mandatory for device which support RTC or NTP/SNTP." ::= { qtechTimeMIBCompliances 1 } -- units of conformance qtechTimeMIBGroup OBJECT-GROUP OBJECTS { qtechClockDateAndTime, qtechClockWeek } STATUS current DESCRIPTION "A collection of objects providing time information." ::= { qtechTimeMIBGroups 1 } qtechTimeRangeMIBGroup OBJECT-GROUP OBJECTS { qtechTimeRangePeriodicIndex , qtechTimeRangePeriodicType , qtechTimeRangePeriodicQtechWeekDay , qtechTimeRangePeriodicEndWeekDay , qtechTimeRangePeriodicTimeOfDayQtech , qtechTimeRangePeriodicTimeOfDayEnd , qtechTimeRangePeriodicRowStatus } STATUS current DESCRIPTION "A collection of objects providing time-range function." ::= { qtechTimeMIBGroups 2 } END