-- -- ASN.1 MIB Definitions -- Output Date: Tue Jul 12 15:00:32 2016 -- IPE-SYSTEM-MIB DEFINITIONS ::= BEGIN ----------------------------------------------- -- IMPORTS Definitions ----------------------------------------------- IMPORTS BridgeId, Timeout FROM BRIDGE-MIB InterfaceIndex FROM IF-MIB Counter32, enterprises, Integer32, IpAddress, NOTIFICATION-TYPE, OBJECT-TYPE, Opaque FROM SNMPv2-SMI DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; ----------------------------------------------- -- Textual Convention Definitions ----------------------------------------------- AlarmTypeValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Alarm Type (CCITT Rec. X.733)" SYNTAX INTEGER { invalid(0), communicationsAlarm(1), qualityOfServiceAlarm(2), processingErrorAlarm(3), equipmentAlarm(4), environmentalAlarm(5), integrityViolationAlarm(6), operationalViolationAlarm(7), physicalViolationAlarm(8), securityViolationAlarm(9), timeDomainViolationAlarm(10) } ProbableCauseValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Probable Cause (CCITT Rec. X.733)" SYNTAX INTEGER { invalid(0), aIS(1), callSetUpFailure(2), degradedSignal(3), farEndReceiverFailure(4), framingError(5), lossOfFrame(6), lossOfPointer(7), lossOfSignal(8), payloadTypeMismatch(9), transmissionError(10), remoteAlarmInterface(11), excessiveBER(12), pathTraceMismatch(13), unavailable(14), signalLabelMismatch(15), lossOfMultiFrame(16), receiveFailure(17), transmitFailure(18), modulationFailure(19), demodulationFailure(20), broadcastChannelFailure(21), connectionEstablishmentError(22), invalidMessageReceived(23), localNodeTransmissionError(24), remoteNodeTransmissionError(25), routingFailure(26), backplaneFailure(51), dataSetProblem(52), equipmentIdentifierDuplication(53), externalIFDeviceProblem(54), lineCardProblem(55), multiplexerProblem(56), nEIdentifierDuplication(57), powerProblem(58), processorProblem(59), protectionPathFailure(60), receiverFailure(61), replaceableUnitMissing(62), replaceableUnitTypeMismatch(63), synchronizationSourceMismatch(64), terminalProblem(65), timingProblem(66), transmitterFailure(67), trunkCardProblem(68), replaceableUnitProblem(69), realTimeClockFailure(70), antennaFailure(71), batteryChargingFailure(72), diskFailure(73), frequencyHoppingFailure(74), iODeviceError(75), lossOfSynchronisation(76), lossOfRedundancy(77), powerSupplyFailure(78), signalQualityEvaluationFailure(79), tranceiverFailure(80), protectionMechanismFailure(81), protectingResourceFailure(82), airCompressorFailure(101), airConditioningFailure(102), airDryerFailure(103), batteryDischarging(104), batteryFailure(105), commercialPowerFailure(106), coolingFanFailure(107), engineFailure(108), fireDetectorFailure(109), fuseFailure(110), generatorFailure(111), lowBatteryThreshold(112), pumpFailure(113), rectifierFailure(114), rectifierHighVoltage(115), rectifierLowFVoltage(116), ventilationsSystemFailure(117), enclosureDoorOpen(118), explosiveGas(119), fire(120), flood(121), highHumidity(122), highTemperature(123), highWind(124), iceBuildUp(125), intrusionDetection(126), lowFuel(127), lowHumidity(128), lowCablePressure(129), lowTemperatue(130), lowWater(131), smoke(132), toxicGas(133), coolingSystemFailure(134), externalEquipmentFailure(135), externalPointFailure(136), storageCapacityProblem(151), memoryMismatch(152), corruptData(153), outOfCPUCycles(154), sfwrEnvironmentProblem(155), sfwrDownloadFailure(156), lossOfRealTimel(157), applicationSubsystemFailure(158), configurationOrCustomisationError(159), databaseInconsistency(160), fileError(161), outOfMemory(162), softwareError(163), timeoutExpired(164), underlayingResourceUnavailable(165), versionMismatch(166), bandwidthReduced(201), congestion(202), excessiveErrorRate(203), excessiveResponseTime(204), excessiveRetransmissionRate(205), reducedLoggingCapability(206), systemResourcesOverload(207), adapterError(500), applicationSubsystemFailture(501), bandwidthReducedX733(502), callEstablishmentError(503), communicationsProtocolError(504), communicationsSubsystemFailure(505), configurationOrCustomizationError(506), congestionX733(507), coruptData(508), cpuCyclesLimitExceeded(509), dataSetOrModemError(510), degradedSignalX733(511), dteDceInterfaceError(512), enclosureDoorOpenX733(513), equipmentMalfunction(514), excessiveVibration(515), fileErrorX733(516), fireDetected(517), framingErrorX733(518), heatingVentCoolingSystemProblem(519), humidityUnacceptable(520), inputOutputDeviceError(521), inputDeviceError(522), lanError(523), leakDetected(524), localNodeTransmissionErrorX733(525), lossOfFrameX733(526), lossOfSignalX733(527), materialSupplyExhausted(528), multiplexerProblemX733(529), outOfMemoryX733(530), ouputDeviceError(531), performanceDegraded(532), powerProblems(533), pressureUnacceptable(534), processorProblems(535), pumpFailureX733(536), queueSizeExceeded(537), receiveFailureX733(538), receiverFailureX733(539), remoteNodeTransmissionErrorX733(540), resourceAtOrNearingCapacity(541), responseTimeExecessive(542), retransmissionRateExcessive(543), softwareErrorX733(544), softwareProgramAbnormallyTerminated(545), softwareProgramError(546), storageCapacityProblemX733(547), temperatureUnacceptable(548), thresholdCrossed(549), timingProblemX733(550), toxicLeakDetected(551), transmitFailureX733(552), transmiterFailure(553), underlyingResourceUnavailable(554), versionMismatchX733(555), authenticationFailure(600), breachOfConfidentiality(601), cableTamper(602), delayedInformation(603), denialOfService(604), duplicateInformation(605), informationMissing(606), informationModificationDetected(607), informationOutOfSequence(608), keyExpired(609), nonRepudiationFailure(610), outOfHoursActivity(611), outOfService(612), proceduralError(613), unauthorizedAccessAttempt(614), unexpectedInformation(615), other(1024) } ----------------------------------------------- -- Begin User MIB Object Definitions ----------------------------------------------- nec OBJECT IDENTIFIER ::= { enterprises 119 } nec-mib OBJECT IDENTIFIER ::= { nec 2 } necProductDepend OBJECT IDENTIFIER ::= { nec-mib 3 } radioEquipment OBJECT IDENTIFIER ::= { necProductDepend 69 } system1 OBJECT IDENTIFIER ::= { radioEquipment 1 } system5 OBJECT IDENTIFIER ::= { radioEquipment 5 } ----------------------------------------------- -- system1 Group Definitions ----------------------------------------------- pmSystem OBJECT IDENTIFIER ::= { system1 1 } sysPmType OBJECT-TYPE SYNTAX INTEGER { typeBranchNE(13), typeNormal(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "PM TYPE SETTING." ::= { pmSystem 3 } sysPrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "PRIMARY IP ADDRESS." ::= { pmSystem 5 } sysOppositeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of the destination." ::= { pmSystem 9 } sysEquipmentType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment Type." ::= { pmSystem 13 } sysEquipmentConfig OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment Config." ::= { pmSystem 14 } ----------------------------------------------- -- system5 Group Definitions ----------------------------------------------- ipeSystemGroup OBJECT IDENTIFIER ::= { system5 1 } ipeSysInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeSysInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of System Information." ::= { ipeSystemGroup 1 } ipeSysInfoEntry OBJECT-TYPE SYNTAX IpeSysInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of System Information." INDEX { ipeSysInfoIndex } ::= { ipeSysInfoTable 1 } IpeSysInfoEntry ::= SEQUENCE { ipeSysInfoIndex Integer32, ipeSysInfoNEAddress IpAddress, ipeSysNeName DisplayString, ipeSysAreaName DisplayString, ipeSysNote DisplayString, ipeSysPrimaryIpAddress IpAddress, ipeSysSubnetMask IpAddress, ipeSysDefaultGateway IpAddress, ipeSysMacAddress MacAddress, ipeSysMibVersion DisplayString, ipeSysEquipmentType Integer32, ipeSysPmType Integer32 } ipeSysInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeSysInfoEntry 1 } ipeSysInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeSysInfoEntry 2 } ipeSysNeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment name (for display)." ::= { ipeSysInfoEntry 3 } ipeSysAreaName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Area name (for display)." ::= { ipeSysInfoEntry 4 } ipeSysNote OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Memorandum (for display)." ::= { ipeSysInfoEntry 5 } ipeSysPrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary IP Address (for display and setting)." ::= { ipeSysInfoEntry 6 } ipeSysSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet mask (for display)." ::= { ipeSysInfoEntry 7 } ipeSysDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Default gateway (for display)." ::= { ipeSysInfoEntry 8 } ipeSysMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address (for display)." ::= { ipeSysInfoEntry 9 } ipeSysMibVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MIB version." ::= { ipeSysInfoEntry 10 } ipeSysEquipmentType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment type." ::= { ipeSysInfoEntry 11 } ipeSysPmType OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of Branch. 1=normalNE mode. 1!=branchNE mode (2<= ipeSysPmType <= 20)." ::= { ipeSysInfoEntry 12 } ipeSysInventoryInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeSysInventoryInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of system basic information." ::= { ipeSystemGroup 2 } ipeSysInventoryInfoEntry OBJECT-TYPE SYNTAX IpeSysInventoryInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of system basic information." INDEX { ipeSysInventoryInfoIndex } ::= { ipeSysInventoryInfoTable 1 } IpeSysInventoryInfoEntry ::= SEQUENCE { ipeSysInventoryInfoIndex Integer32, ipeSysInventoryInfoNEAddress IpAddress, ipeSysInvSoftwareVersion DisplayString, ipeSysInvSoftwareReleaseDate DateAndTime, ipeSysInvDlSoftwareVersion DisplayString, ipeSysInvOperationSide Integer32, ipeSysInvStandbySoftwareVersion DisplayString } ipeSysInventoryInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeSysInventoryInfoEntry 1 } ipeSysInventoryInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeSysInventoryInfoEntry 2 } ipeSysInvSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software version." ::= { ipeSysInventoryInfoEntry 3 } ipeSysInvSoftwareReleaseDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Software update date and time." ::= { ipeSysInventoryInfoEntry 4 } ipeSysInvDlSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Download control." ::= { ipeSysInventoryInfoEntry 5 } ipeSysInvOperationSide OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active side information." ::= { ipeSysInventoryInfoEntry 6 } ipeSysInvStandbySoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version of inactive side." ::= { ipeSysInventoryInfoEntry 7 } ipeSysOperationGroup OBJECT IDENTIFIER ::= { ipeSystemGroup 3 } ipeSysOpTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeSysOpTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of date and time." ::= { ipeSysOperationGroup 1 } ipeSysOpTimeEntry OBJECT-TYPE SYNTAX IpeSysOpTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of date and time." INDEX { ipeSysOpTimeIndex } ::= { ipeSysOpTimeTable 1 } IpeSysOpTimeEntry ::= SEQUENCE { ipeSysOpTimeIndex Integer32, ipeSysOpTimeNEAddress IpAddress, ipeSysOpCurrentTime DateAndTime, ipeSysOpStartTime DateAndTime, ipeSysOpUpTime Counter32 } ipeSysOpTimeIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeSysOpTimeEntry 1 } ipeSysOpTimeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeSysOpTimeEntry 2 } ipeSysOpCurrentTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Current time." ::= { ipeSysOpTimeEntry 3 } ipeSysOpStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "OS started time." ::= { ipeSysOpTimeEntry 4 } ipeSysOpUpTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration after OS started (second)." ::= { ipeSysOpTimeEntry 5 } ipeSysOpFileDownloadTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeSysOpFileDownloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of file download." ::= { ipeSysOperationGroup 2 } ipeSysOpFileDownloadEntry OBJECT-TYPE SYNTAX IpeSysOpFileDownloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of file download." INDEX { ipeSysOpFileDownloadIndex } ::= { ipeSysOpFileDownloadTable 1 } IpeSysOpFileDownloadEntry ::= SEQUENCE { ipeSysOpFileDownloadIndex Integer32, ipeSysOpFileDownloadNEAddress IpAddress, ipeSysOpFileDownloadModule INTEGER, ipeSysOpFileDownloadCpuResetDetail INTEGER, ipeSysOpFileDownloadStatus INTEGER, ipeSysOpFileDownloadCtrl INTEGER, ipeSysOpFileDownloadProtocolType INTEGER } ipeSysOpFileDownloadIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeSysOpFileDownloadEntry 1 } ipeSysOpFileDownloadNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeSysOpFileDownloadEntry 2 } ipeSysOpFileDownloadModule OBJECT-TYPE SYNTAX INTEGER { invalid(0), idu(1), odu(2), mdprm(3), raFpga(4), ipeFpga(5), softkey(7), cfgNet(8), cfgEqu(9), cfgUser(10), https(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "Program type. *'0:Invalidity' is used as an initial state." ::= { ipeSysOpFileDownloadEntry 3 } ipeSysOpFileDownloadCpuResetDetail OBJECT-TYPE SYNTAX INTEGER { invalid(0), revertReset(1), normReset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "CPU reset control. 0:Invalidity 1:revert reset 2:normal reset( without revert ) *'0:Invalidity' is used as an initial state." ::= { ipeSysOpFileDownloadEntry 4 } ipeSysOpFileDownloadStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), downloadCompleted(1), downloadFailed(2), downloadExecuting(3), downloadSuspending(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Download result. 0:Invalidity 1:Completed 2:Failed 3:Executing 4:Suspending *'0:Invalidity' is used as an initial state. *A change state is the following three kinds. 1)When it operates normally: (Start)->(3:Executing)->(1:Completed) 2)When it cancels on the way: (Start)->(3:Executing)->(4:Suspending)-> (Completed) 3)When unusual detection is carried out on the way: (Start)->(3:Executing)->(2:Failed) *The download start from excluding (3:Executing) is permitted. *The download start from (3:Executing) is not permitted. *Pertinent details: ipeSysOpFileDownloadCtrl" ::= { ipeSysOpFileDownloadEntry 5 } ipeSysOpFileDownloadCtrl OBJECT-TYPE SYNTAX INTEGER { invalid(0), startDownload(1), suspendDownload(2), startUpload(3), endUpload(4), resetDownload(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Download control. 0:Invalidity 1:Download start 2:Download suspend 3:Upload start 4:Upload end 5:Download reset *'0:Invalidity' is used as an initial state. *'5:Download reset' terminates the FTP server(vsftpd) with the deletion processing in the type of the file for all download directory. *The object file name allows only alphanumeric character '0-9', 'a-z', 'A-Z' of ASCII code, and sign '-_.+'. *Pertinent details: ipeSysOpFileDownloadProtocolType *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeSysOpFileDownloadStatus *Pertinent details: ipeFsUpdateFileStatus *Pertinent details: ipeFsUsbProcStatus [Race condition] *When ipeSysOpFileDownloadStatus is (3:Executing) or (4:Suspending), (1:Download start) is invalid. *When ipeSysOpFileDownloadStatus is (4:Suspending), (2:Download suspend) is invalid. *When ipeSysOpFileDownloadStatus is (0:Invalidity), (1:Download start) is valid, but do nothing. *When ipeFsUpdateFileStatusis(3:Executing), it is invalid. Other one is valid. *When ipeFsUsbProcStatus is (2:Normal:Process executing), it is invalid. Other one is valid. [Indispensable condition] *When it is (1:Download start) or (3:Upload start), (4:Upload end),ipeSysOpFileDownloadProtocolType setup is indispensable." ::= { ipeSysOpFileDownloadEntry 6 } ipeSysOpFileDownloadProtocolType OBJECT-TYPE SYNTAX INTEGER { invalid(0), ftp(1), sftp(2), http(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Kind of protocol, *'0:Invalidity' is used as an initial state. *Pertinent details: ipeSysOpFileDownloadCtrl" ::= { ipeSysOpFileDownloadEntry 7 } ipeSysOpProgramPmonRmonClearTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeSysOpProgramPmonRmonClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { ipeSysOperationGroup 3 } ipeSysOpProgramPmonRmonClearEntry OBJECT-TYPE SYNTAX IpeSysOpProgramPmonRmonClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ipeSysOpProgramPmonRmonClearIndex } ::= { ipeSysOpProgramPmonRmonClearTable 1 } IpeSysOpProgramPmonRmonClearEntry ::= SEQUENCE { ipeSysOpProgramPmonRmonClearIndex Integer32, ipeSysOpProgramPmonRmonClearNEAddress IpAddress, ipeSysOpProgramPmonRmonClear Integer32, ipeSysOpProgramPmonRmonClearResult INTEGER } ipeSysOpProgramPmonRmonClearIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeSysOpProgramPmonRmonClearEntry 1 } ipeSysOpProgramPmonRmonClearNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeSysOpProgramPmonRmonClearEntry 2 } ipeSysOpProgramPmonRmonClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "PMON data clear control 0:FIXED VALUE 1:REQUEST" ::= { ipeSysOpProgramPmonRmonClearEntry 3 } ipeSysOpProgramPmonRmonClearResult OBJECT-TYPE SYNTAX INTEGER { invalid(0), completed(1), failed(2), executing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "PMON data clear control response 1:COMPLETED 2:FAILED 3:EXECUTING" ::= { ipeSysOpProgramPmonRmonClearEntry 4 } ipeFileSystemGroup OBJECT IDENTIFIER ::= { system5 2 } ipeFsFileInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeFsFileInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of file information." ::= { ipeFileSystemGroup 1 } ipeFsFileInfoEntry OBJECT-TYPE SYNTAX IpeFsFileInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of file information." INDEX { ipeFsFileInfoIndex } ::= { ipeFsFileInfoTable 1 } IpeFsFileInfoEntry ::= SEQUENCE { ipeFsFileInfoIndex Integer32, ipeFsFileInfoNEAddress IpAddress, ipeFsFileListType INTEGER, ipeFsFileListCurrent DisplayString, ipeFsFileListTemp DisplayString, ipeFsUpdateFileDetail DisplayString, ipeFsUpdateFileStatus INTEGER, ipeFsUpdateFileStatusDetail OCTET STRING, ipeFsUpdateFileProgressBase Integer32, ipeFsUpdateFileProgress Integer32, ipeFsUpdateFileUpdateList DisplayString, ipeFsUpdateFileConfigPartial OCTET STRING } ipeFsFileInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeFsFileInfoEntry 1 } ipeFsFileInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeFsFileInfoEntry 2 } ipeFsFileListType OBJECT-TYPE SYNTAX INTEGER { invalid(0), idu(1), odu(2), mdprm(3), raFpga(4), ipeFpga(5), softkey(7), cfgNet(8), cfgEqu(9), cfgUser(10), https(11), pmon(12), rmon(13), log(14), inventory(15), mac(16), all(17) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type for acquisition 0:Invalidity 1: IDU 2: ODU 3: MODEM Parameter 4: FPGA(Other slot) 5: FPGA(Ctrl) 6: MSE 7: Software Key License 8: Network Config 9: Equipment Config 10: User Config 11: Server Certificate for HTTPS/HTTPS certificate issue request 12: PMON data 13: RMON data 14: Command/event/alarm LOG 15: Device Inventory file 16: MAC learning entry 17: all(All types) 18: Card Firmware 19: Private key for SSL Server Certificate 20: CSR (Certificate Signing Request) for SSL Server Certificate 21: CA (Certification Authority) certificate for SSL Server Certificate 22: Modem Controller(valid for MODEM-AV) *'0:Invalidity' is used as an initial state. *Pertinent details: ipeFsFileListCurrent *Pertinent details: ipeFsFileListTemp" ::= { ipeFsFileInfoEntry 3 } ipeFsFileListCurrent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current file list (Flash-ROM). The list of the type set to ipeFsFileListType is acquired. Form of file list: It's 1 item by 'file name (It included in a path),file size,CRC'. Each item is divided at space. *CRC is fixed '0'. Ex) FilePath1/FileName1,size,CRC FilePath2/FileName2,size,CRC... [Indispensable condition] *ipeFsFileListType setup is indispensable." ::= { ipeFsFileInfoEntry 4 } ipeFsFileListTemp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Temporary file list (DRAM). The list of the type set to ipeFsFileListType is acquired. Form of file list: It's 1 item by 'file name (It isn't included in a pass),file size,CRC'. Each item is divided at space. *CRC is fixed '0'. Ex) Filename1,size,CRC Filename2,size,CRC... [Indispensable condition] *ipeFsFileListType setup is indispensable." ::= { ipeFsFileInfoEntry 5 } ipeFsUpdateFileDetail OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "File update control. Thing to specify object file after it downloads it by 'ipeSysOpFileDownloadCtrl','ipeFsUsbCommand' and to demand file update. Ex) Filename1 *The object file name allows only alphanumeric character '0-9', 'a-z', 'A-Z' of ASCII code, and sign '-_.+'. *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeFsUpdateFileUpdateList *Pertinent details: ipeSysOpFileDownloadStatus *Pertinent details: ipeFsUpdateFileStatus *Pertinent details: ipeFsUsbProcStatus [Race condition] *When ipeSysOpFileDownloadStatus is (3:Executing) or (4:Suspending), it is invalid. *When ipeFsUpdateFileStatusis(3:Executing), it is invalid. *When ipeFsUsbProcStatus is (2:Normal :Process executing), it is invalid. [Indispensable condition] *When ipeSysOpFileDownloadModule is 'odu(2)', 'mdprm(3)', or 'raFpga(4)', ipeFsUpdateFileUpdateList setup is indispensable." ::= { ipeFsFileInfoEntry 6 } ipeFsUpdateFileStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), success(1), failure(2), executing(3), checking(4), successWithoutRestrictedUser(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Update result. 0:Invalidity 1:Success 2:Failed 3:Executing 4:Checking 5:Success but some restricted UserName(s) are ignored *'0:Invalidity' is used as an initial state. *The slot result of the correspondence is set to 'IpeFsUpdateFileStatusDetail', and processing is continued when failing in the two or more slot update. *Pertinent details: ipeFsUpdateFileDetail *Pertinent details: ipeFsUpdateFileStatusDetail" ::= { ipeFsFileInfoEntry 7 } ipeFsUpdateFileStatusDetail OBJECT-TYPE SYNTAX OCTET STRING (SIZE(42..42)) MAX-ACCESS read-only STATUS current DESCRIPTION "Update result is detailed. OCT: Update result of each slot 1: Completed 2: Failed The slot for which the current state is used becomes the following. OCT[0] : MainBoard(iPASO200) or SLOT0 OCT[1] : MODEM1(iPASO200) or SLOT1 OCT[2] : MODEM2(iPASO200) or SLOT2 OCT[3] : Option Card(iPASO200) or SLOT3 : OCT[33]: ODU1 OCT[34]: ODU2 OCT[35]: ODU3 : *Pertinent details: ipeSysOpFileDownloadCtrl *Pertinent details: ipeFsUpdateFileDetail *Pertinent details: ipeFsUsbCommand" ::= { ipeFsFileInfoEntry 8 } ipeFsUpdateFileProgressBase OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Progress of update (denominator). *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeFsUpdateFileStatus" ::= { ipeFsFileInfoEntry 9 } ipeFsUpdateFileProgress OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Progress of update (molecule). *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeFsUpdateFileStatus" ::= { ipeFsFileInfoEntry 10 } ipeFsUpdateFileUpdateList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Definition of update slot number. Form of file list: When downloading it to ODU/FPGA/MDPRM, the forwarding site slot number is enumerated by a comma end. Ex) 0,5,1,6,10... The slot number of relating MODEM and fpga must set the slot number of Option Card to odu and mdprm according to inventory information. The slot number to which the current state can be set becomes the following. iPASO200 iPASO400,1000 0 : MainBoard or SLOT0 1 : MODEM1 or SLOT1 2 : MODEM2 or SLOT2 3 : Option Card or SLOT3 : 33: ODU1 34: ODU2 35: ODU3 : *Pertinent details: ipeFsUpdateFileDetail" ::= { ipeFsFileInfoEntry 11 } ipeFsUpdateFileConfigPartial OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify Equipment Configuration Partial Download pattern. If this object is set with ipeFsUpdateFileDetail, the system will perform the partial download, otherwise the system will perform the normal download. And Partial Download is performed only when Equipment Configuration Dowload. SYNTAX is 32bit string. The definition of each bit is shown below. - bit1-4: specify download mode. 0001 : normal mode other value : reserved (system rejects the request) - bit5-32: specify the equipment config part. Setting 1 to each bit means corresponding config download is activated. Bit5 : Equipment Configuration (must set when the normal mode) Bit6 : Radio Configuration Bit7 : Radio Configuration w/o Radio Frequency Bit6 and Bit7 cannot be set to 1 simultaneously. Bit8 : E1/STM1 Mapping (must set when Bit6 or Bit7 is activated) Bit9 : MODEM Function setting Bit10: ETH Function setting Bit11: E1/STM1/Cross Connect Setting Bit12: PWE Setting Bit13: Equipment Clock/Synchronization Setting Bit14: Relay-Alarm Mapping Bit15: V11/OW Setting Bit16: Alarm/AIS Setting Bit17: PMON/RMON Setting Bit18: AUX Setting other: reserved (don't care) Example) the pattern of downloading the equipment configuration, radio configuration, E1/STM1 mapping, ETH Function Setting on normal mode. ipeFsUpdateFileConfigPartial = '00011101010000000000000000000000'" ::= { ipeFsFileInfoEntry 12 } ipeFsUsbInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeFsUsbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of USB memory information." ::= { ipeFileSystemGroup 2 } ipeFsUsbInfoEntry OBJECT-TYPE SYNTAX IpeFsUsbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of USB mamory information." INDEX { ipeFsUsbInfoIndex } ::= { ipeFsUsbInfoTable 1 } IpeFsUsbInfoEntry ::= SEQUENCE { ipeFsUsbInfoIndex Integer32, ipeFsUsbInfoNEAddress IpAddress, ipeFsUsbCommand DisplayString, ipeFsUsbProcStatus INTEGER, ipeFsUsbList DisplayString, ipeFsUsbConnectStatus INTEGER } ipeFsUsbInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeFsUsbInfoEntry 1 } ipeFsUsbInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeFsUsbInfoEntry 2 } ipeFsUsbCommand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "USB control mode/USB file path/Program type specification. [Mode],[Arg1],[Type] Mode:USB control mode 0:DL, 1:UL Arg1:object file path -1 (original file path (path from a chroot subordinate) When DL: Inside of USB, When UL: Inside of IPE) Case of DL: Ex.) idu/iPASOLINK200-idufw-v1.00.XX.bin Case of UL: Ex.) export/config/iPASOLINK-network.cfg Type:Program type The program type set to 'ipeSysOpFileDownloadModule' is specified. *The unsetting is allowed for an arbitrary, set item. 0: Invalid 1: IDU F/W 2: ODU F/W 3: MODEM Parameter 4: FPGA(Option Card) 5: FPGA(MainBoard) 6: MSE Card F/W 7: Software License Key 8: Network Config 9: Equipment Config 10: User Config 11: HTTPS Server Certificate *The object file name allows only alphanumeric character '0-9', 'a-z', 'A-Z' of ASCII code, and sign '-_.+'. *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeSysOpFileDownloadStatus *Pertinent details: ipeFsUpdateFileStatus *Pertinent details: ipeFsUsbProcStatus [Race condition] *When ipeSysOpFileDownloadStatus is (3:Executing) or (4:Suspending), (0:DL) is invalid. *When ipeFsUpdateFileStatusis (3:Executing), (0:DL) is invalid. *When ipeFsUsbProcStatus is (2:Normal :Process executing), (0:DL) is invalid." ::= { ipeFsUsbInfoEntry 3 } ipeFsUsbProcStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), completed(1), executing(2), diskFullError(98), noSuchFileError(99), unKnownFileError(101), notInsertError(102), accessError(103), otherError(127) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of USB memory control result. The classification of a setting value and the meaning are as follows. 0:Invalidity 1:NORMAL:Normal end 2:NORMAL:Executing 98:ERROR:The lack of free space on disk or media 99:ERROR:File/directory not found 101:ERROR:The kind of designated files,the size, contents, etc. are unjust 102:ERROR:Media aren't inserted 103:ERROR:Media access error (ex:unjust format) 127:ERROR:Undefined error (other errors) When having a control instruction, it's made '2:Executing'. *'0:Invalidity' is used as an initial state. *Pertinent details: ipeFsUsbCommand" ::= { ipeFsUsbInfoEntry 4 } ipeFsUsbList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "File list format. Form of file list: It's 1 item by 'file name (path from a chroot subordinate),file size,CRC'. Each item is divided at space. *CRC is fixed '0'. Ex) FilePath1/FileName1,size,CRC FilePath2/FileName2,size,CRC..." ::= { ipeFsUsbInfoEntry 5 } ipeFsUsbConnectStatus OBJECT-TYPE SYNTAX INTEGER { usbConnect(1), usbNoConnect(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of connection USB memory. 1:Connect 2:Not connect" ::= { ipeFsUsbInfoEntry 6 } ipeConfigurationGroup OBJECT IDENTIFIER ::= { system5 3 } ipeCfgSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of System Item Information." ::= { ipeConfigurationGroup 1 } ipeCfgSystemEntry OBJECT-TYPE SYNTAX IpeCfgSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of System Item Information." INDEX { ipeCfgSystemIndex } ::= { ipeCfgSystemTable 1 } IpeCfgSystemEntry ::= SEQUENCE { ipeCfgSystemIndex Integer32, ipeCfgSystemNEAddress IpAddress, ipeCfgNeName DisplayString, ipeCfgAreaName DisplayString, ipeCfgMemo DisplayString } ipeCfgSystemIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgSystemEntry 1 } ipeCfgSystemNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgSystemEntry 2 } ipeCfgNeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "PASOLINK unit name. White space characters are not allowed for head or tail of characters." ::= { ipeCfgSystemEntry 3 } ipeCfgAreaName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Area name. White space characters are not allowed for head or tail of characters." ::= { ipeCfgSystemEntry 4 } ipeCfgMemo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Memorandum. White space characters are not allowed for head or tail of characters." ::= { ipeCfgSystemEntry 5 } ipeCfgOemTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgOemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Equipment Item Information." ::= { ipeConfigurationGroup 2 } ipeCfgOemEntry OBJECT-TYPE SYNTAX IpeCfgOemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Equipment Item Information." INDEX { ipeCfgOemIndex } ::= { ipeCfgOemTable 1 } IpeCfgOemEntry ::= SEQUENCE { ipeCfgOemIndex Integer32, ipeCfgOemNEAddress IpAddress, ipeCfgOemSysDescr DisplayString, ipeCfgOemSysContact DisplayString, ipeCfgOemSysName DisplayString, ipeCfgOemSysLocation DisplayString } ipeCfgOemIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgOemEntry 1 } ipeCfgOemNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgOemEntry 2 } ipeCfgOemSysDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System Description. The space of the begininng and end dose not permit it." ::= { ipeCfgOemEntry 3 } ipeCfgOemSysContact OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System contact. The space of the begininng and end dose not permit it." ::= { ipeCfgOemEntry 4 } ipeCfgOemSysName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System name. The space of the begininng and end dose not permit it." ::= { ipeCfgOemEntry 5 } ipeCfgOemSysLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System location. The space of the begininng and end dose not permit it." ::= { ipeCfgOemEntry 6 } ipeCfgAux OBJECT IDENTIFIER ::= { ipeConfigurationGroup 3 } ipeCfgAuxInTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAuxInEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aux Input Table" ::= { ipeCfgAux 1 } ipeCfgAuxInEntry OBJECT-TYPE SYNTAX IpeCfgAuxInEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ipeCfgAuxInIndex } ::= { ipeCfgAuxInTable 1 } IpeCfgAuxInEntry ::= SEQUENCE { ipeCfgAuxInIndex Integer32, ipeCfgAuxInNEAddress IpAddress, ipeCfgAuxInItemName DisplayString, ipeCfgAuxInItemType INTEGER, ipeCfgAuxInOpenState DisplayString, ipeCfgAuxInCloseState DisplayString, ipeCfgAuxInSeverity INTEGER, ipeCfgAuxInAlarmType AlarmTypeValue, ipeCfgAuxInProbableCause ProbableCauseValue } ipeCfgAuxInIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgAuxInEntry 1 } ipeCfgAuxInNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAuxInEntry 2 } ipeCfgAuxInItemName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Item Name" ::= { ipeCfgAuxInEntry 3 } ipeCfgAuxInItemType OBJECT-TYPE SYNTAX INTEGER { alarmInOpen(1), alarmInClose(2), status(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Item Type" ::= { ipeCfgAuxInEntry 4 } ipeCfgAuxInOpenState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Status Strings (Event Off (Open))" ::= { ipeCfgAuxInEntry 5 } ipeCfgAuxInCloseState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Status Strings (Event On (Close))" ::= { ipeCfgAuxInEntry 6 } ipeCfgAuxInSeverity OBJECT-TYPE SYNTAX INTEGER { invalid(0), critical(1), major(2), minor(3), warning(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Severity (X.733)" ::= { ipeCfgAuxInEntry 7 } ipeCfgAuxInAlarmType OBJECT-TYPE SYNTAX AlarmTypeValue MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm Type (X.733)" ::= { ipeCfgAuxInEntry 8 } ipeCfgAuxInProbableCause OBJECT-TYPE SYNTAX ProbableCauseValue MAX-ACCESS read-write STATUS current DESCRIPTION "Probable Cause (X.733)" ::= { ipeCfgAuxInEntry 9 } ipeCfgAuxOutTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAuxOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AUX Output Table" ::= { ipeCfgAux 2 } ipeCfgAuxOutEntry OBJECT-TYPE SYNTAX IpeCfgAuxOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ipeCfgAuxOutIndex } ::= { ipeCfgAuxOutTable 1 } IpeCfgAuxOutEntry ::= SEQUENCE { ipeCfgAuxOutIndex Integer32, ipeCfgAuxOutNEAddress IpAddress, ipeCfgAuxOutItemName DisplayString, ipeCfgAuxOutOpenState DisplayString, ipeCfgAuxOutCloseState DisplayString } ipeCfgAuxOutIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgAuxOutEntry 1 } ipeCfgAuxOutNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAuxOutEntry 2 } ipeCfgAuxOutItemName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Item Name" ::= { ipeCfgAuxOutEntry 3 } ipeCfgAuxOutOpenState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Status Strings (Event Off (Open))" ::= { ipeCfgAuxOutEntry 4 } ipeCfgAuxOutCloseState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Status Strings (Event On (Close))" ::= { ipeCfgAuxOutEntry 5 } ipeCfgNtp OBJECT IDENTIFIER ::= { ipeConfigurationGroup 4 } ipeCfgNtpServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgNtpServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of NTP configuration information." ::= { ipeCfgNtp 1 } ipeCfgNtpServiceEntry OBJECT-TYPE SYNTAX IpeCfgNtpServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of NTP configuration information." INDEX { ipeCfgNtpServiceIndex } ::= { ipeCfgNtpServiceTable 1 } IpeCfgNtpServiceEntry ::= SEQUENCE { ipeCfgNtpServiceIndex Integer32, ipeCfgNtpServiceNEAddress IpAddress, ipeCfgNtpServiceEnable INTEGER, ipeCfgNtpServerMode INTEGER, ipeCfgNtpClientMode INTEGER, ipeCfgNtpServerStratum Integer32, ipeCfgNtpServerMulticastPort Integer32, ipeCfgNtpServerMulticastIntervalTime Integer32 } ipeCfgNtpServiceIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgNtpServiceEntry 1 } ipeCfgNtpServiceNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgNtpServiceEntry 2 } ipeCfgNtpServiceEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP control enable." ::= { ipeCfgNtpServiceEntry 3 } ipeCfgNtpServerMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), unicast(1), multicast(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP server mode." ::= { ipeCfgNtpServiceEntry 4 } ipeCfgNtpClientMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), unicast(1), multicast(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP client mode." ::= { ipeCfgNtpServiceEntry 5 } ipeCfgNtpServerStratum OBJECT-TYPE SYNTAX Integer32 (2..15) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP Stratum." ::= { ipeCfgNtpServiceEntry 6 } ipeCfgNtpServerMulticastPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NTP server multicast port." ::= { ipeCfgNtpServiceEntry 7 } ipeCfgNtpServerMulticastIntervalTime OBJECT-TYPE SYNTAX Integer32 (4..17) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of NTP multicast polling time." ::= { ipeCfgNtpServiceEntry 8 } ipeCfgNtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgNtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of NTP server information." ::= { ipeCfgNtp 2 } ipeCfgNtpServerEntry OBJECT-TYPE SYNTAX IpeCfgNtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of NTP server information." INDEX { ipeCfgNtpServerIndex } ::= { ipeCfgNtpServerTable 1 } IpeCfgNtpServerEntry ::= SEQUENCE { ipeCfgNtpServerIndex Integer32, ipeCfgNtpServerNEAddress IpAddress, ipeCfgNtpServerAddress IpAddress, ipeCfgNtpVersion Integer32, ipeCfgNtpPollTime Integer32 } ipeCfgNtpServerIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgNtpServerEntry 1 } ipeCfgNtpServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgNtpServerEntry 2 } ipeCfgNtpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of NTP server." ::= { ipeCfgNtpServerEntry 3 } ipeCfgNtpVersion OBJECT-TYPE SYNTAX Integer32 (3..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Version of supported NTP message." ::= { ipeCfgNtpServerEntry 4 } ipeCfgNtpPollTime OBJECT-TYPE SYNTAX Integer32 (4..17) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP Polling Time, in seconds as a power of two. For instance, a value of six indicates a interval of 64 seconds. Note) The value less than 6 is rejected by the agent because of the system recommendation. iPASOLINK 200/400/1000 series : R3.5 or later. iPASOLINK AOR : R1.0 or later." ::= { ipeCfgNtpServerEntry 5 } ipeCfgFtp OBJECT IDENTIFIER ::= { ipeConfigurationGroup 7 } ipeCfgFtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgFtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of FTP server configuration information." ::= { ipeCfgFtp 1 } ipeCfgFtpServerEntry OBJECT-TYPE SYNTAX IpeCfgFtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of FTP server configuration information." INDEX { ipeCfgFtpServerIndex } ::= { ipeCfgFtpServerTable 1 } IpeCfgFtpServerEntry ::= SEQUENCE { ipeCfgFtpServerIndex Integer32, ipeCfgFtpServerNEAddress IpAddress, ipeCfgFtpServerEnable INTEGER, ipeCfgFtpServerCommandTcpPort Integer32, ipeCfgFtpServerDataTcpPort Integer32, ipeCfgFtpServerMaxSession Integer32, ipeCfgFtpServerAutoDisable INTEGER } ipeCfgFtpServerIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgFtpServerEntry 1 } ipeCfgFtpServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgFtpServerEntry 2 } ipeCfgFtpServerEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), serviceDisable(1), serviceEnable(2), alwaysEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "FTP control enable." ::= { ipeCfgFtpServerEntry 3 } ipeCfgFtpServerCommandTcpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of FTP command." ::= { ipeCfgFtpServerEntry 4 } ipeCfgFtpServerDataTcpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of FTP data transfer." ::= { ipeCfgFtpServerEntry 5 } ipeCfgFtpServerMaxSession OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of max connections." ::= { ipeCfgFtpServerEntry 6 } ipeCfgFtpServerAutoDisable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "FTP automatic stop control enable." ::= { ipeCfgFtpServerEntry 7 } ipeCfgSftp OBJECT IDENTIFIER ::= { ipeConfigurationGroup 8 } ipeCfgSftpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgSftpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SFTP server configuration information." ::= { ipeCfgSftp 1 } ipeCfgSftpServerEntry OBJECT-TYPE SYNTAX IpeCfgSftpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of SFTP server configuration information." INDEX { ipeCfgSftpServerIndex } ::= { ipeCfgSftpServerTable 1 } IpeCfgSftpServerEntry ::= SEQUENCE { ipeCfgSftpServerIndex Integer32, ipeCfgSftpServerNEAddress IpAddress, ipeCfgSftpServerEnable INTEGER, ipeCfgSftpServerAutoDisable INTEGER } ipeCfgSftpServerIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgSftpServerEntry 1 } ipeCfgSftpServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgSftpServerEntry 2 } ipeCfgSftpServerEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), serviceDisable(1), serviceEnable(2), alwaysEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "SFTP control enable." ::= { ipeCfgSftpServerEntry 3 } ipeCfgSftpServerAutoDisable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SFTP automatic stop control enable." ::= { ipeCfgSftpServerEntry 4 } ipeCfgHttp OBJECT IDENTIFIER ::= { ipeConfigurationGroup 9 } ipeCfgHttpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgHttpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of HTTP configuration information." ::= { ipeCfgHttp 1 } ipeCfgHttpServerEntry OBJECT-TYPE SYNTAX IpeCfgHttpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of HTTP configuration information." INDEX { ipeCfgHttpServerIndex } ::= { ipeCfgHttpServerTable 1 } IpeCfgHttpServerEntry ::= SEQUENCE { ipeCfgHttpServerIndex Integer32, ipeCfgHttpServerNEAddress IpAddress, ipeCfgHttpServerEnable INTEGER, ipeCfgHttpServerTcpPort Integer32 } ipeCfgHttpServerIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgHttpServerEntry 1 } ipeCfgHttpServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgHttpServerEntry 2 } ipeCfgHttpServerEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "HTTP control enable." ::= { ipeCfgHttpServerEntry 3 } ipeCfgHttpServerTcpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of HTTP." ::= { ipeCfgHttpServerEntry 4 } ipeCfgHttps OBJECT IDENTIFIER ::= { ipeConfigurationGroup 10 } ipeCfgHttpsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgHttpsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of HTTPS configuration information." ::= { ipeCfgHttps 1 } ipeCfgHttpsServerEntry OBJECT-TYPE SYNTAX IpeCfgHttpsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of HTTPS configuration information." INDEX { ipeCfgHttpsServerIndex } ::= { ipeCfgHttpsServerTable 1 } IpeCfgHttpsServerEntry ::= SEQUENCE { ipeCfgHttpsServerIndex Integer32, ipeCfgHttpsServerNEAddress IpAddress, ipeCfgHttpsServerEnable INTEGER, ipeCfgHttpsServerTcpPort Integer32 } ipeCfgHttpsServerIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgHttpsServerEntry 1 } ipeCfgHttpsServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgHttpsServerEntry 2 } ipeCfgHttpsServerEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "HTTPS control enable." ::= { ipeCfgHttpsServerEntry 3 } ipeCfgHttpsServerTcpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP port number of HTTPS." ::= { ipeCfgHttpsServerEntry 4 } ipeCfgSnmp OBJECT IDENTIFIER ::= { ipeConfigurationGroup 11 } ipeCfgSnmpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgSnmpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMP configuration information." ::= { ipeCfgSnmp 1 } ipeCfgSnmpServerEntry OBJECT-TYPE SYNTAX IpeCfgSnmpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of SNMP configuration information." INDEX { ipeCfgSnmpServerIndex } ::= { ipeCfgSnmpServerTable 1 } IpeCfgSnmpServerEntry ::= SEQUENCE { ipeCfgSnmpServerIndex Integer32, ipeCfgSnmpServerNEAddress IpAddress, ipeCfgSnmpV1V2cEnable INTEGER, ipeCfgSnmpV3Enable INTEGER, ipeCfgSnmpServerPort Integer32 } ipeCfgSnmpServerIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgSnmpServerEntry 1 } ipeCfgSnmpServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgSnmpServerEntry 2 } ipeCfgSnmpV1V2cEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP entity is permitted to receive & process SNMPv1/v2c PDU or is not permitted to do. Even if it is disabled, SNMPv1/v2c Traps is sent." ::= { ipeCfgSnmpServerEntry 3 } ipeCfgSnmpV3Enable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP entity is permitted to receive & process SNMPv3 PDU or is not permitted to do. Even if it is disabled, SNMPv3 Traps is sent." ::= { ipeCfgSnmpServerEntry 4 } ipeCfgSnmpServerPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A UDP port number to receive all SNMP Request-PDU. The reboot of the system is necessary to reflect setting." ::= { ipeCfgSnmpServerEntry 5 } ipeCfgSnmpCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgSnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMP community information." ::= { ipeCfgSnmp 2 } ipeCfgSnmpCommunityEntry OBJECT-TYPE SYNTAX IpeCfgSnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of SNMP community information." INDEX { ipeCfgSnmpCommunityIndex } ::= { ipeCfgSnmpCommunityTable 1 } IpeCfgSnmpCommunityEntry ::= SEQUENCE { ipeCfgSnmpCommunityIndex Integer32, ipeCfgSnmpCommunityNEAddress IpAddress, ipeCfgSnmpCommunityName DisplayString, ipeCfgSnmpCommunityAccessLevel INTEGER, ipeCfgSnmpCommunityAccessAddress IpAddress, ipeCfgSnmpCommunityAccessPrefixLength Integer32, ipeCfgSnmpCommunityRowStatus RowStatus } ipeCfgSnmpCommunityIndex OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgSnmpCommunityEntry 1 } ipeCfgSnmpCommunityNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgSnmpCommunityEntry 2 } ipeCfgSnmpCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This entity's community name. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgSnmpCommunityEntry 3 } ipeCfgSnmpCommunityAccessLevel OBJECT-TYPE SYNTAX INTEGER { invalid(0), operatorLevel(1), configLevel(2), adminLevel(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "A access level of a connection using this entry's community name." ::= { ipeCfgSnmpCommunityEntry 4 } ipeCfgSnmpCommunityAccessAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "An address which is permitted to use this entry's community name. When masking in ipeCfgSnmpCommunityAccessPrefixLength, the host address part has to be a zero, if any. Also the following address can't be used. 127.0.0.0/8 Loopback 224.0.0.0/4 Multicasts (former Class D) 240.0.0.0/4 Reserved (former Class E)" ::= { ipeCfgSnmpCommunityEntry 5 } ipeCfgSnmpCommunityAccessPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "A prefix length of ipeCfgSnmpCommunityAccessAddress." ::= { ipeCfgSnmpCommunityEntry 6 } ipeCfgSnmpCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only active(1). You can SET only createAndGo(4) or Destroy(6). 1) how to create To create a new row, you must SET objects indicated below. ipeCfgSnmpCommunityName ipeCfgSnmpCommunityAccessLevel ipeCfgSnmpCommunityAccessAddress ipeCfgSnmpCommunityAccessPrefixLength ipeCfgSnmpCommunityAccessAddress2 * ipeCfgSnmpCommunityAccessPrefixLength2 * ipeCfgSnmpCommunityAccessAddress3 * ipeCfgSnmpCommunityAccessPrefixLength3 * ipeCfgSnmpCommunityAccessUsage * ipeCfgSnmpCommunityAccessUsage2 * ipeCfgSnmpCommunityAccessUsage3 * ipeCfgSnmpCommunityAccessV6Address ipeCfgSnmpCommunityAccessV6PrefixLength ipeCfgSnmpCommunityAccessV6Address2 * ipeCfgSnmpCommunityAccessV6PrefixLength2 * ipeCfgSnmpCommunityAccessV6Address3 * ipeCfgSnmpCommunityAccessV6PrefixLength3 * ipeCfgSnmpCommunityAccessAddressType * ipeCfgSnmpCommunityAccessV6Usage * ipeCfgSnmpCommunityAccessV6Usage2 * ipeCfgSnmpCommunityAccessV6Usage3 * ipeCfgSnmpCommunityRowStatus <- createAndGo(4) * NOT for EX CPRI Either ipeCfgSnmpCommunityAccessAddress/Address2/Address3 or ipeCfgSnmpCommunityAccessV6Address/Address2/Address3 can be configured depending on ipeCfgSnmpCommunityAccessAddressType. ipeCfgSnmpCommunityIndex is an index of this entry. 2) how to destroy To destroy a exist row, you must SET a destory(6) to ipeCfgSnmpCommunityRowStatus. 3) how to modify It is not possible. Please destroy a exist row, and create a new row. < Attention > You have to restart equipment to apply this entry(creating, deleting) to actual movement." ::= { ipeCfgSnmpCommunityEntry 7 } ipeCfgSnmpTrapTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgSnmpTrapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of notification information." ::= { ipeCfgSnmp 3 } ipeCfgSnmpTrapEntry OBJECT-TYPE SYNTAX IpeCfgSnmpTrapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of notification information." INDEX { ipeCfgSnmpTrapEntryIndex } ::= { ipeCfgSnmpTrapTable 1 } IpeCfgSnmpTrapEntry ::= SEQUENCE { ipeCfgSnmpTrapEntryIndex Integer32, ipeCfgSnmpTrapEntryNEAddress IpAddress, ipeCfgSnmpTrapVersion INTEGER, ipeCfgSnmpTrapNotifyType INTEGER, ipeCfgSnmpTrapTargetAddress IpAddress, ipeCfgSnmpTrapTargetPort Integer32, ipeCfgSnmpTrapSecurityName DisplayString, ipeCfgSnmpTrapSecurityLevel INTEGER, ipeCfgSnmpTrapEngineId OCTET STRING, ipeCfgSnmpTrapAuthAlgorithm INTEGER, ipeCfgSnmpTrapAuthKey DisplayString, ipeCfgSnmpTrapPrivAlgorithm INTEGER, ipeCfgSnmpTrapPrivKey DisplayString, ipeCfgSnmpTrapRowStatus RowStatus } ipeCfgSnmpTrapEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgSnmpTrapEntry 1 } ipeCfgSnmpTrapEntryNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgSnmpTrapEntry 2 } ipeCfgSnmpTrapVersion OBJECT-TYPE SYNTAX INTEGER { invalid(0), v1(1), v2c(2), v3(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "A version of this entry's notification." ::= { ipeCfgSnmpTrapEntry 3 } ipeCfgSnmpTrapNotifyType OBJECT-TYPE SYNTAX INTEGER { invalid(0), trap(1), inform(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "A notification type of this entry's notification." ::= { ipeCfgSnmpTrapEntry 4 } ipeCfgSnmpTrapTargetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP address of this entry's notification. The following address can't be used. 127.0.0.0/8 Loopback 0.0.0.0/0 Current network 224.0.0.0/4 Multicasts (former Class D) 240.0.0.0/4 Reserved (former Class E)" ::= { ipeCfgSnmpTrapEntry 5 } ipeCfgSnmpTrapTargetPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination UDP port this entry's notification." ::= { ipeCfgSnmpTrapEntry 6 } ipeCfgSnmpTrapSecurityName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "A security name. The meaning is different depending on ipeCfgSnmpTrapVersion. v1/v2c : It's meaning a community name. v3 : It's meaning a user name. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'. When there was the same combination to the other index, ipeCfgSnmpTrapSecurityName and ipeCfgSnmpTrapEngineId become error." ::= { ipeCfgSnmpTrapEntry 7 } ipeCfgSnmpTrapSecurityLevel OBJECT-TYPE SYNTAX INTEGER { invalid(0), noAuthNoPriv(1), authNoPriv(2), authPriv(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "A security level of this entry's notification. When ipeCfgSnmpTrapVersion is v1(1) or v2c(2), you have to SET noAuthNoPriv(1)." ::= { ipeCfgSnmpTrapEntry 8 } ipeCfgSnmpTrapEngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "A snmpEngineID which this entry's notification uses.(5-32 octet) ipeCfgSnmpTrapNotifyType is effective only at the time of inform(2). A snmpEngineID of a destination SNMP entity. When there was the same combination to the other index, ipeCfgSnmpTrapSecurityName and ipeCfgSnmpTrapEngineId become error." ::= { ipeCfgSnmpTrapEntry 9 } ipeCfgSnmpTrapAuthAlgorithm OBJECT-TYPE SYNTAX INTEGER { invalid(0), md5(1), sha(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Authentication protocol. ipeCfgSnmpTrapNotifyType is effective for the SET only at the time of inform(2). Even if it is done SET in the case of trap(1), I am ignored. In addition, a value of ipeCfgAccountUserSnmpV3AuthAlgorithm is acquired at time to get." ::= { ipeCfgSnmpTrapEntry 10 } ipeCfgSnmpTrapAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Authenticate password for SNMP inform PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is not same as original password size (8..31). When the object 'ipeCfgSnmpTrapNotifyType' is trap(1), SET request is not processed (discarded), and GET request returns the same value as 'ipeCfgAccountUserSnmpV3AuthKey'." ::= { ipeCfgSnmpTrapEntry 11 } ipeCfgSnmpTrapPrivAlgorithm OBJECT-TYPE SYNTAX INTEGER { invalid(0), des(1), aes(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "privacy protocol. ipeCfgSnmpTrapNotifyType is effective for the SET only at the time of inform(2). Even if it is done SET in the case of trap(1), I am ignored. In addition, a value of ipeCfgAccountUserSnmpV3PrivAlgorithm is acquired at time to get." ::= { ipeCfgSnmpTrapEntry 12 } ipeCfgSnmpTrapPrivKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Privacy password for SNMP inform PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is not same as orignal password size (8..31). When the object 'ipeCfgSnmpTrapNotifyType' is trap(1), SET request is not processed (discarded), and GET request returns the same value as 'ipeCfgAccountUserSnmpV3PrivKey'." ::= { ipeCfgSnmpTrapEntry 13 } ipeCfgSnmpTrapRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only active(1). You can SET only createAndGo(4) or destroy(6). 1) how to create 1.1) SNMPv1/v2c To create a new row, you must SET objects indicated below. ipeCfgSnmpTrapEntryIndex, ipeCfgSnmpTrapVersion, ipeCfgSnmpTrapNotifyType, ipeCfgSnmpTrapTargetAddress, ipeCfgSnmpTrapTargetV6Address, ipeCfgSnmpTrapTargetAddressType(*), ipeCfgSnmpTrapTaergetPort, ipeCfgSnmpTrapSecurityName ipeCfgSnmpTrapRowStatus # Only createAndGo(4). It isn't necessary to set ipeCfgSnmpTrapSecurityLevel. When set it, the value is checked, so all except for noAuthNoPriv (1) will be NG. And, the other object is not necessary. Even if it is done SET, it is checked the value, but ignored. 1.2) SNMPv3 (ipeCfgSnmpTrapNotifyType = trap(1)) ipeCfgSnmpTrapVersion, ipeCfgSnmpTrapNotifyType, ipeCfgSnmpTrapTargetAddress, ipeCfgSnmpTrapTargetV6Address, ipeCfgSnmpTrapTargetAddressType(*), ipeCfgSnmpTrapTaergetPort, ipeCfgSnmpTrapSecurityName ipeCfgSnmpTrapRowStatus # Only createAndGo(4). Other object is not necessary. Even if it is done SET, it is checked the value, but ignored. 1.3) SNMPv3 (ipeCfgSnmpTrapNotifyType = inform(2)) To create a new row, you must SET objects indicated below. ipeCfgSnmpTrapVersion, ipeCfgSnmpTrapNotifyType, ipeCfgSnmpTrapTargetAddress, ipeCfgSnmpTrapTargetV6Address, ipeCfgSnmpTrapTargetAddressType(*), ipeCfgSnmpTrapTaergetPort, ipeCfgSnmpTrapSecurityName, ipeCfgSnmpTrapSecurityLevel, ipeCfgSnmpTrapEngineId, ipeCfgSnmpTrapAuthAlgorithm, ipeCfgSnmpTrapAuthKey, ipeCfgSnmpTrapPrivAlgorithm, ipeCfgSnmpTrapPrivKey ipeCfgSnmpTrapRowStatus # Only createAndGo(4). * NOT for EX CPRI ipeCfgSnmpTrapEntryIndex is an index of this entry. 2) how to destroy To destroy a exist row, you must SET a destory(6) to ipeCfgSnmpCommunityRowStatus. 3) how to modify It is not possible. Please destroy a exist row, and create a new row." ::= { ipeCfgSnmpTrapEntry 14 } ipeCfgAccount OBJECT IDENTIFIER ::= { ipeConfigurationGroup 12 } ipeCfgAccountUserInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAccountUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of user Information." ::= { ipeCfgAccount 1 } ipeCfgAccountUserInfoEntry OBJECT-TYPE SYNTAX IpeCfgAccountUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of user information." INDEX { ipeCfgAccountUserIndex } ::= { ipeCfgAccountUserInfoTable 1 } IpeCfgAccountUserInfoEntry ::= SEQUENCE { ipeCfgAccountUserIndex Integer32, ipeCfgAccountUserNEAddress IpAddress, ipeCfgAccountUserName DisplayString, ipeCfgAccountUserKey DisplayString, ipeCfgAccountUserGroup DisplayString, ipeCfgAccountUserSnmpV3SecurityLevel INTEGER, ipeCfgAccountUserSnmpV3AuthAlgorithm INTEGER, ipeCfgAccountUserSnmpV3AuthKey DisplayString, ipeCfgAccountUserSnmpV3PrivAlgorithm INTEGER, ipeCfgAccountUserSnmpV3PrivKey DisplayString, ipeCfgAccountUserRowStatus RowStatus } ipeCfgAccountUserIndex OBJECT-TYPE SYNTAX Integer32 (1..102) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgAccountUserInfoEntry 1 } ipeCfgAccountUserNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAccountUserInfoEntry 2 } ipeCfgAccountUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "User Name. An overlap of a user name isn't permitted. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgAccountUserInfoEntry 3 } ipeCfgAccountUserKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "User password encrypted by blowfish. Acceptable characters for this object is shown below. '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgAccountUserInfoEntry 4 } ipeCfgAccountUserGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the privilege for the user. Acceptable characters for this object is shown below. '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgAccountUserInfoEntry 5 } ipeCfgAccountUserSnmpV3SecurityLevel OBJECT-TYPE SYNTAX INTEGER { invalid(0), noAuthNoPriv(1), authNoPriv(2), authPriv(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "SNMPv3 security level. Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is inapplicable)" ::= { ipeCfgAccountUserInfoEntry 6 } ipeCfgAccountUserSnmpV3AuthAlgorithm OBJECT-TYPE SYNTAX INTEGER { invalid(0), md5(1), sha(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Hash calculate algorithm of authenticate password. Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is inapplicable)" ::= { ipeCfgAccountUserInfoEntry 7 } ipeCfgAccountUserSnmpV3AuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Authenticate password for SNMP SET/GET/TRAP PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is not same as orignal password (8..31). When the object 'ipeCfgSnmpTrapNotifyType' is set to inform(2), the INFORM PDU Authenticate key is configured by 'ipeCfgSnmpTrapAuthKey'." ::= { ipeCfgAccountUserInfoEntry 8 } ipeCfgAccountUserSnmpV3PrivAlgorithm OBJECT-TYPE SYNTAX INTEGER { invalid(0), des(1), aes(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Cipher algorithm. Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is inapplicable)" ::= { ipeCfgAccountUserInfoEntry 9 } ipeCfgAccountUserSnmpV3PrivKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Privacy password for SNMP SET/GET/TRAP PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is not same as orignal password (8..31). When the 'ipeCfgSnmpTrapNotifyType' is set to inform(2), the INFORM PDU Authenticate key is configured by 'ipeCfgSnmpTrapAuthKey'." ::= { ipeCfgAccountUserInfoEntry 10 } ipeCfgAccountUserRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only active(1). 1) creating a entry When you make a new entry, you must SET objects indicated below. ipeCfgAccountUserIndex ipeCfgAccountUserName ipeCfgAccountUserKey ipeCfgAccountUserGroup ipeCfgAccountUserSnmpV3SecurityLevel ipeCfgAccountUserSnmpV3AuthAlgorithm ipeCfgAccountUserSnmpV3AuthKey ipeCfgAccountUserSnmpV3PrivAlgorithm ipeCfgAccountUserSnmpV3PrivKey ipeCfgAccountUserRowStatus <- createAndGo(4) 2) modifing a entry ipeCfgAccountUserKey can only be changed. Other items can not be updated. Please do destroy of entry and a create. 3) deleting a entry When you SET a destroy(6) to ipeCfgAccountUserRowStatus, the entry is destroyed. 4) About SNMPv3 When there is not ipeCfgAccountGroupInfoEntry corresponding to ipeCfgAccountUserGroup, SNMPv3-TRAP which I used ipeCfgAccountUserName for is output, but cannot use SNMPv3-Set/Get-Request." ::= { ipeCfgAccountUserInfoEntry 11 } ipeCfgAccountGroupInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAccountGroupInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Group Information." ::= { ipeCfgAccount 2 } ipeCfgAccountGroupInfoEntry OBJECT-TYPE SYNTAX IpeCfgAccountGroupInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Group Information." INDEX { ipeCfgAccountGroupIndex } ::= { ipeCfgAccountGroupInfoTable 1 } IpeCfgAccountGroupInfoEntry ::= SEQUENCE { ipeCfgAccountGroupIndex Integer32, ipeCfgAccountGroupNEAddress IpAddress, ipeCfgAccountGroupName DisplayString, ipeCfgAccountGroupTelnet INTEGER, ipeCfgAccountGroupSsh INTEGER, ipeCfgAccountGroupFtp INTEGER, ipeCfgAccountGroupSftp INTEGER, ipeCfgAccountGroupHttp INTEGER, ipeCfgAccountGroupHttps INTEGER, ipeCfgAccountGroupSnmp INTEGER, ipeCfgAccountGroupAccessLevel INTEGER, ipeCfgAccountGroupRowStatus RowStatus } ipeCfgAccountGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgAccountGroupInfoEntry 1 } ipeCfgAccountGroupNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAccountGroupInfoEntry 2 } ipeCfgAccountGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Group name. An overlap of a group name isn't permitted. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgAccountGroupInfoEntry 3 } ipeCfgAccountGroupTelnet OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "TELNET enable." ::= { ipeCfgAccountGroupInfoEntry 4 } ipeCfgAccountGroupSsh OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "SSH enable." ::= { ipeCfgAccountGroupInfoEntry 5 } ipeCfgAccountGroupFtp OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "FTP enable." ::= { ipeCfgAccountGroupInfoEntry 6 } ipeCfgAccountGroupSftp OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "SFTP enable." ::= { ipeCfgAccountGroupInfoEntry 7 } ipeCfgAccountGroupHttp OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "HTTP enable." ::= { ipeCfgAccountGroupInfoEntry 8 } ipeCfgAccountGroupHttps OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "HTTPS enable." ::= { ipeCfgAccountGroupInfoEntry 9 } ipeCfgAccountGroupSnmp OBJECT-TYPE SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "SNMP enable." ::= { ipeCfgAccountGroupInfoEntry 10 } ipeCfgAccountGroupAccessLevel OBJECT-TYPE SYNTAX INTEGER { invalid(0), operatorLevel(1), configLevel(2), adminLevel(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Access level." ::= { ipeCfgAccountGroupInfoEntry 11 } ipeCfgAccountGroupRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only 'active(1)'. 1) creating a entry. When you make a new entry, you must SET objects indicated below. ipeCfgAccountGroupName ipeCfgAccountGroupTelnet ipeCfgAccountGroupSsh ipeCfgAccountGroupFtp ipeCfgAccountGroupSftp ipeCfgAccountGroupHttp ipeCfgAccountGroupHttps ipeCfgAccountGroupSnmp ipeCfgAccountGroupAccessLevel ipeCfgAccountGroupRowStatus <- createAndGo(4) ipeCfgAccountGroupIndex is an index of this entry. 2) deleting a entry. When you SET a destroy(6) to ipeCfgAccountGroupRowStatus, the entry is destroyed. Information that synchronizes and is deleted: User Information setting(ssh/ftp/http login information) SNMPv3-Set/Get-Req user info (The SNMPv3-TRAP information is left) 3) modifing a entry It can change it other than ipeCfgAccountGroupName, ipeCfgAccountGroupRowStatus. But the entry of default (ADMIN/OPERATOR/CONFIG) is impossible of a change ipeCfgAccountGroupName." ::= { ipeCfgAccountGroupInfoEntry 12 } ipeCfgUserAccountAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgUserAccountAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure user authentication method about Web LCT." ::= { ipeCfgAccount 4 } ipeCfgUserAccountAuthEntry OBJECT-TYPE SYNTAX IpeCfgUserAccountAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "..." INDEX { ipeCfgUserAccountAuthIndex } ::= { ipeCfgUserAccountAuthTable 1 } IpeCfgUserAccountAuthEntry ::= SEQUENCE { ipeCfgUserAccountAuthIndex Integer32, ipeCfgUserAccountAuthNEAddress IpAddress, ipeCfgUserAccountAuthMode INTEGER, ipeCfgUserAccountAuthOrder INTEGER, ipeCfgUserAccountAuthTrapEnable INTEGER, ipeCfgUserAccountAuthTrapLocal INTEGER, ipeCfgUserAccountAuthTrapExternal INTEGER } ipeCfgUserAccountAuthIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgUserAccountAuthEntry 1 } ipeCfgUserAccountAuthNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved object for northbound interface." ::= { ipeCfgUserAccountAuthEntry 2 } ipeCfgUserAccountAuthMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), mode1(1), mode2(2), mode3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the user authentication mode. mode1 : local authentication only. mode2 : local and LDAP authentication. (NOT SUPPORTED) mode3 : local and RADIUS authentication. mode2 will be supprted in future version." DEFVAL { mode1 } ::= { ipeCfgUserAccountAuthEntry 3 } ipeCfgUserAccountAuthOrder OBJECT-TYPE SYNTAX INTEGER { invalid(0), localAuthFirst(1), externalAuthFirst(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the user authentication order. This object is effective only if ipeCfgUserAccountAuthMode is set to mode2 or mode3. External authentication means authentication with RADIUS or LDAP. localAuthFirst : local -> external externalAuthFirst : external -> local" DEFVAL { localAuthFirst } ::= { ipeCfgUserAccountAuthEntry 4 } ipeCfgUserAccountAuthTrapEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable user login trap. In case this object is set to enable, the system sends trap when user attempt to login to Web LCT." DEFVAL { enable } ::= { ipeCfgUserAccountAuthEntry 5 } ipeCfgUserAccountAuthTrapLocal OBJECT-TYPE SYNTAX INTEGER { invalid(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate authentication result of local authentication. This object is dedicated for login control trap. If you read this object, the system returns invalid(0)." DEFVAL { invalid } ::= { ipeCfgUserAccountAuthEntry 6 } ipeCfgUserAccountAuthTrapExternal OBJECT-TYPE SYNTAX INTEGER { invalid(0), success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate authentication result of externel authentication. This object is dedicated for login control trap. If you read this object, the system returns invalid(0)." DEFVAL { invalid } ::= { ipeCfgUserAccountAuthEntry 7 } ipeCfgDhcpGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 13 } ipeCfgDhcpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgDhcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCPserver table." ::= { ipeCfgDhcpGroup 1 } ipeCfgDhcpServerEntry OBJECT-TYPE SYNTAX IpeCfgDhcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of DHCPserver table." INDEX { ipeCfgDhcpServerIndex } ::= { ipeCfgDhcpServerTable 1 } IpeCfgDhcpServerEntry ::= SEQUENCE { ipeCfgDhcpServerIndex Integer32, ipeCfgDhcpServerNEAddress IpAddress, ipeCfgDhcpServerEnable INTEGER, ipeCfgDhcpLeaseAddrRangeBegin IpAddress, ipeCfgDhcpLeaseAddrRangeEnd IpAddress } ipeCfgDhcpServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgDhcpServerEntry 1 } ipeCfgDhcpServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgDhcpServerEntry 2 } ipeCfgDhcpServerEnable OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), restart(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of DHCP. value range:start(1) stop(2) restart(3) DHCPD has already started. When the start is specified, DHCPD restart." ::= { ipeCfgDhcpServerEntry 3 } ipeCfgDhcpLeaseAddrRangeBegin OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Beginning IPaddress within the range of lease address. value range:Dotted decimal notation denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255 ipeCfgDhcpLeaseAddrRangeBegin don't same as ipeCfgPortLctIpAddress value" ::= { ipeCfgDhcpServerEntry 4 } ipeCfgDhcpLeaseAddrRangeEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "End IPaddress within the range of lease address. value range:Dotted decimal notation denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255 ipeCfgDhcpLeaseAddrRangeEnd don't same as ipeCfgPortLctIpAddress value" ::= { ipeCfgDhcpServerEntry 5 } ipeCfgStpGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 14 } ipeCfgStpBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgStpBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "STP state setting table." ::= { ipeCfgStpGroup 1 } ipeCfgStpBridgeEntry OBJECT-TYPE SYNTAX IpeCfgStpBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of STP state setting table." INDEX { ipeCfgStpBridgeIndex } ::= { ipeCfgStpBridgeTable 1 } IpeCfgStpBridgeEntry ::= SEQUENCE { ipeCfgStpBridgeIndex Integer32, ipeCfgStpBridgeNEAddress IpAddress, ipeCfgStpEnable INTEGER, ipeCfgStpPriority Integer32, ipeCfgStpBridgeMaxAge Timeout, ipeCfgStpBridgeHelloTime Timeout, ipeCfgStpBridgeForwardDelay Timeout } ipeCfgStpBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgStpBridgeEntry 1 } ipeCfgStpBridgeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgStpBridgeEntry 2 } ipeCfgStpEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of STP. value :enabled disabled" ::= { ipeCfgStpBridgeEntry 3 } ipeCfgStpPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge priority. value range:0 to 65535" ::= { ipeCfgStpBridgeEntry 4 } ipeCfgStpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "MaxAge (in units of hundredths of a second). value range:600 to 4000 rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) => ipeCfgStpBridgeMaxAge ipeCfgStpBridgeMaxAge >= 2 * (ipeCfgStpBridgeHelloTime + 1)" ::= { ipeCfgStpBridgeEntry 5 } ipeCfgStpBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "HelloTime (in units of hundredths of a second). value range:100 to 1000 rule:ipeCfgStpBridgeMaxAge >= 2x(ipeCfgStpBridgeHelloTime + 1)" ::= { ipeCfgStpBridgeEntry 6 } ipeCfgStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "ForwardDelay (in units of hundredths of a second). value range:400 to 3000 rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) >= ipeCfgStpBridgeMaxAge" ::= { ipeCfgStpBridgeEntry 7 } ipeCfgStpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgStpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "STP port information table." ::= { ipeCfgStpGroup 2 } ipeCfgStpPortEntry OBJECT-TYPE SYNTAX IpeCfgStpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of STP port information table." INDEX { ipeCfgStpPortIfIndex } ::= { ipeCfgStpPortTable 1 } IpeCfgStpPortEntry ::= SEQUENCE { ipeCfgStpPortIfIndex InterfaceIndex, ipeCfgStpPortNEAddress IpAddress, ipeCfgStpPortPriority Integer32, ipeCfgStpPortPathCost Integer32, ipeCfgStpPortEdgeEnable INTEGER } ipeCfgStpPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgStpPortEntry 1 } ipeCfgStpPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgStpPortEntry 2 } ipeCfgStpPortPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Port priority. value range:0 to 63" ::= { ipeCfgStpPortEntry 3 } ipeCfgStpPortPathCost OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Pathcost. value range:1 to 65535" ::= { ipeCfgStpPortEntry 4 } ipeCfgStpPortEdgeEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of BPDU. value range:enabled(1) disabled(2)" ::= { ipeCfgStpPortEntry 5 } ipeCfgPortGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 15 } ipeCfgPortModemTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MODEM port set up information table." ::= { ipeCfgPortGroup 1 } ipeCfgPortModemEntry OBJECT-TYPE SYNTAX IpeCfgPortModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of MODEM port set up information table." INDEX { ipeCfgPortModemIfIndex } ::= { ipeCfgPortModemTable 1 } IpeCfgPortModemEntry ::= SEQUENCE { ipeCfgPortModemIfIndex InterfaceIndex, ipeCfgPortModemNEAddress IpAddress, ipeCfgPortModemEnable INTEGER } ipeCfgPortModemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortModemEntry 1 } ipeCfgPortModemNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortModemEntry 2 } ipeCfgPortModemEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of MODEM port. value range: enabled(1) disabled(2)" ::= { ipeCfgPortModemEntry 3 } ipeCfgPortLctTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortLctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LCT port set up information table." ::= { ipeCfgPortGroup 2 } ipeCfgPortLctEntry OBJECT-TYPE SYNTAX IpeCfgPortLctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of LCT port set up information table." INDEX { ipeCfgPortLctIfIndex } ::= { ipeCfgPortLctTable 1 } IpeCfgPortLctEntry ::= SEQUENCE { ipeCfgPortLctIfIndex InterfaceIndex, ipeCfgPortLctNEAddress IpAddress, ipeCfgPortLctIpAddress IpAddress, ipeCfgPortLctNetMask IpAddress, ipeCfgPortLctEnable INTEGER, ipeCfgPortLctMtu Integer32, ipeCfgPortLctAutoNeg INTEGER } ipeCfgPortLctIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortLctEntry 1 } ipeCfgPortLctNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortLctEntry 2 } ipeCfgPortLctIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPaddress of LCT port. It makes an error of the Internet Protocol address setting that overlaps in the port in the device. The object port and the range of the value are described as follows. Object port: Lct, InbandMngVLAN1-16, Bridge1-Bridge20, NE2 Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255) The relation is not in the state and the number of Branch of interfaces and the Internet Protocol address repetition check is checked. When 0.0.0.0 is set to ipeCfgPortLctIpAddress, it becomes an Internet Protocol address deletion." ::= { ipeCfgPortLctEntry 3 } ipeCfgPortLctNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask of LCT port. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000-0xfffffffc(0-30bit)" ::= { ipeCfgPortLctEntry 4 } ipeCfgPortLctEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of LCT port. value range: enabled disabled" ::= { ipeCfgPortLctEntry 5 } ipeCfgPortLctMtu OBJECT-TYPE SYNTAX Integer32 (256..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "MTU value of LCT. value range:256 to 1500" ::= { ipeCfgPortLctEntry 6 } ipeCfgPortLctAutoNeg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of LCT AUTO NEGOTIATION. value range: enabled disabled" ::= { ipeCfgPortLctEntry 7 } ipeCfgPortEtherTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "NMS/NE1 port set up information table." ::= { ipeCfgPortGroup 3 } ipeCfgPortEtherEntry OBJECT-TYPE SYNTAX IpeCfgPortEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of NMS/NE1 port set up information table." INDEX { ipeCfgPortEtherIfIndex } ::= { ipeCfgPortEtherTable 1 } IpeCfgPortEtherEntry ::= SEQUENCE { ipeCfgPortEtherIfIndex InterfaceIndex, ipeCfgPortEtherNEAddress IpAddress, ipeCfgPortEtherEnable INTEGER, ipeCfgPortEtherAutoNeg INTEGER, ipeCfgPortEtherSpecialFilter INTEGER, ipeCfgPortEtherLldpMode INTEGER } ipeCfgPortEtherIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortEtherEntry 1 } ipeCfgPortEtherNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortEtherEntry 2 } ipeCfgPortEtherEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of NMS/NE1 port. value range: enabled(1) disabled(2)" DEFVAL { enabled } ::= { ipeCfgPortEtherEntry 3 } ipeCfgPortEtherAutoNeg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto negotiation invalid effective/setting of NMS/NE1 port. value range: enabled(1) disabled(2)" ::= { ipeCfgPortEtherEntry 4 } ipeCfgPortEtherSpecialFilter OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting of whether a special broadcast packet is blocked." ::= { ipeCfgPortEtherEntry 5 } ipeCfgPortEtherLldpMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), standardMode(1), proprietaryMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switch to select MAC address of LLDP Frame. standardMode : MAC address of LLDP Frame is 01-80-C2-00-00-0E. proprietaryMode : MAC address of LLDP Frame is configured in ipeCfgLldpProprietaryModeMacAddress." DEFVAL { standardMode } ::= { ipeCfgPortEtherEntry 6 } ipeCfgPortNe2Table OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortNe2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "NE2 port set up information table." ::= { ipeCfgPortGroup 4 } ipeCfgPortNe2Entry OBJECT-TYPE SYNTAX IpeCfgPortNe2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of NE2 port set up information table." INDEX { ipeCfgPortNe2IfIndex } ::= { ipeCfgPortNe2Table 1 } IpeCfgPortNe2Entry ::= SEQUENCE { ipeCfgPortNe2IfIndex InterfaceIndex, ipeCfgPortNe2NEAddress IpAddress, ipeCfgPortNe2IpAddress IpAddress, ipeCfgPortNe2Enable INTEGER, ipeCfgPortNe2Speed INTEGER, ipeCfgPortNe2NeighborMibEnable INTEGER } ipeCfgPortNe2IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortNe2Entry 1 } ipeCfgPortNe2NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortNe2Entry 2 } ipeCfgPortNe2IpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "NE2 port IP Address. value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255) The ppp function is restarted when setting it." ::= { ipeCfgPortNe2Entry 3 } ipeCfgPortNe2Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NE2 port enable. value range:enabled(1) disabled(2)" ::= { ipeCfgPortNe2Entry 4 } ipeCfgPortNe2Speed OBJECT-TYPE SYNTAX INTEGER { speed9600(9600), speed19200(19200) } MAX-ACCESS read-write STATUS current DESCRIPTION "NE2 port baud rate. value range:9600bps(9600) 19200bps(19200) The ppp function is restarted when setting it." ::= { ipeCfgPortNe2Entry 5 } ipeCfgPortNe2NeighborMibEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NE2 port neighbor detection enable. value range:enabled(1) disabled(2) The ppp function is restarted when setting it." ::= { ipeCfgPortNe2Entry 6 } ipeCfgPortE1Table OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "E1 port set up information table." ::= { ipeCfgPortGroup 5 } ipeCfgPortE1Entry OBJECT-TYPE SYNTAX IpeCfgPortE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of E1 port set up information table." INDEX { ipeCfgPortE1IfIndex } ::= { ipeCfgPortE1Table 1 } IpeCfgPortE1Entry ::= SEQUENCE { ipeCfgPortE1IfIndex InterfaceIndex, ipeCfgPortE1NEAddress IpAddress, ipeCfgPortE1Enable INTEGER, ipeCfgPortE1ChannelNumber Integer32 } ipeCfgPortE1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortE1Entry 1 } ipeCfgPortE1NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortE1Entry 2 } ipeCfgPortE1Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of E1 port. value range: enabled(1) disabled(2)" ::= { ipeCfgPortE1Entry 3 } ipeCfgPortE1ChannelNumber OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Use channel of E1 port. value range:1 to 16" ::= { ipeCfgPortE1Entry 4 } ipeCfgPortInbandTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortInbandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "InBand Management VLAN port set up information table." ::= { ipeCfgPortGroup 6 } ipeCfgPortInbandEntry OBJECT-TYPE SYNTAX IpeCfgPortInbandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of INBAND Management VLAN port set up information table." INDEX { ipeCfgPortInbandIfIndex } ::= { ipeCfgPortInbandTable 1 } IpeCfgPortInbandEntry ::= SEQUENCE { ipeCfgPortInbandIfIndex InterfaceIndex, ipeCfgPortInbandNEAddress IpAddress, ipeCfgPortInbandIpAddress IpAddress, ipeCfgPortInbandNetMask IpAddress, ipeCfgPortInbandEnable INTEGER, ipeCfgPortInbandVlanId Integer32, ipeCfgPortInbandMtu Integer32, ipeCfgPortInbandCos Integer32 } ipeCfgPortInbandIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortInbandEntry 1 } ipeCfgPortInbandNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortInbandEntry 2 } ipeCfgPortInbandIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "IPaddress of INBAND Management VLAN port. It makes an error of the Internet Protocol address setting that overlaps in the port in the device. The object port and the range of the value are described as follows. Object port: Lct, InbandMngVLAN1-16, Bridge1-20, NE2 Value range: 0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255) The relation is not in the state and the number of Branch of interfaces and the Internet Protocol address repetition check is checked. When 0.0.0.0 is set to ipeCfgPortInbandIpAddress, it becomes an Internet Protocol address deletion." ::= { ipeCfgPortInbandEntry 3 } ipeCfgPortInbandNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Subnet mask of INBAND Management VLAN port. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000 - 0xfffffffc(0 - 30bit)" ::= { ipeCfgPortInbandEntry 4 } ipeCfgPortInbandEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Effective/invalid setting of INBAND Management VLAN port. value range: enabled(1) disabled(2)" ::= { ipeCfgPortInbandEntry 5 } ipeCfgPortInbandVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID of INBAND Management VLAN port. value range:1 to 4094" ::= { ipeCfgPortInbandEntry 6 } ipeCfgPortInbandMtu OBJECT-TYPE SYNTAX Integer32 (256..1500) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "MTU value of INBAND Management VLAN port. value range:256 to 1500" ::= { ipeCfgPortInbandEntry 7 } ipeCfgPortInbandCos OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "CoS value of INBAND Management VLAN port" DEFVAL { 7 } ::= { ipeCfgPortInbandEntry 8 } ipeCfgPortMainEtherTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPortMainEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Main traffic ether port set up information table." ::= { ipeCfgPortGroup 7 } ipeCfgPortMainEtherEntry OBJECT-TYPE SYNTAX IpeCfgPortMainEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of main traffic ether port set up information table." INDEX { ipeCfgPortMainEtherIfIndex } ::= { ipeCfgPortMainEtherTable 1 } IpeCfgPortMainEtherEntry ::= SEQUENCE { ipeCfgPortMainEtherIfIndex InterfaceIndex, ipeCfgPortMainEtherNEAddress IpAddress, ipeCfgPortMainEtherLldpMode INTEGER } ipeCfgPortMainEtherIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPortMainEtherEntry 1 } ipeCfgPortMainEtherNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPortMainEtherEntry 2 } ipeCfgPortMainEtherLldpMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), standardMode(1), proprietaryMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switch to select MAC address of LLDP Frame. standardMode : MAC address of LLDP Frame is 01-80-C2-00-00-0E. proprietaryMode : MAC address of LLDP Frame is configured in ipeCfgLldpProprietaryModeMacAddress." DEFVAL { standardMode } ::= { ipeCfgPortMainEtherEntry 3 } ipeCfgBridgeGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 16 } ipeCfgBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge set up information table." ::= { ipeCfgBridgeGroup 1 } ipeCfgBridgeEntry OBJECT-TYPE SYNTAX IpeCfgBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of Bridge set up information table." INDEX { ipeCfgBridgeIndex } ::= { ipeCfgBridgeTable 1 } IpeCfgBridgeEntry ::= SEQUENCE { ipeCfgBridgeIndex Integer32, ipeCfgBridgeNEAddress IpAddress, ipeCfgBridgeIpAddress IpAddress, ipeCfgBridgeNetMask IpAddress, ipeCfgBridgeMtu Integer32 } ipeCfgBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgBridgeEntry 1 } ipeCfgBridgeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgBridgeEntry 2 } ipeCfgBridgeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPAddress set to bridge. Value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255) It makes an error of the Internet Protocol address setting that overlaps in the port in the device. It becomes the following about the port of the Internet Protocol address repetition check object. Object port: Lct, InbandMngVLAN1-16, Bridge1-Bridge20, NE2 The relation is not in the state and the number of Branch of interfaces and the Internet Protocol address repetition check is checked. There can not be relation and it sets, and it refer the number of branch. When 0.0.0.0 is set to ipeCfgBridgeIpAddress, it becomes an Internet Protocol address deletion." ::= { ipeCfgBridgeEntry 3 } ipeCfgBridgeNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Netmask set to bridge. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000 - 0xfffffffc(0 - 30bit) There can not be relation and it sets, and it refer the number of branch." ::= { ipeCfgBridgeEntry 4 } ipeCfgBridgeMtu OBJECT-TYPE SYNTAX Integer32 (256..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "MTU value of bridge. value range:256 to 1500 There can not be relation and it sets, and it refer the number of branch." ::= { ipeCfgBridgeEntry 5 } ipeCfgBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge set up information table." ::= { ipeCfgBridgeGroup 2 } ipeCfgBridgePortEntry OBJECT-TYPE SYNTAX IpeCfgBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of Bridge set up information table." INDEX { ipeCfgBridgePortIfIndex } ::= { ipeCfgBridgePortTable 1 } IpeCfgBridgePortEntry ::= SEQUENCE { ipeCfgBridgePortIfIndex InterfaceIndex, ipeCfgBridgePortNEAddress IpAddress, ipeCfgBridgePortBridgeIndex Integer32 } ipeCfgBridgePortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgBridgePortEntry 1 } ipeCfgBridgePortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgBridgePortEntry 2 } ipeCfgBridgePortBridgeIndex OBJECT-TYPE SYNTAX Integer32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Index value of bridge." ::= { ipeCfgBridgePortEntry 3 } ipeCfgPripGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 17 } ipeCfgPripTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPripEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PRIP set up information table." ::= { ipeCfgPripGroup 1 } ipeCfgPripEntry OBJECT-TYPE SYNTAX IpeCfgPripEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of PRIP set up information table." INDEX { ipeCfgPripIndex } ::= { ipeCfgPripTable 1 } IpeCfgPripEntry ::= SEQUENCE { ipeCfgPripIndex Integer32, ipeCfgPripNEAddress IpAddress, ipeCfgPripRouteEnable INTEGER, ipeCfgPripUdpPort INTEGER } ipeCfgPripIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPripEntry 1 } ipeCfgPripNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPripEntry 2 } ipeCfgPripRouteEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disables PRIP. enabled(1):PRIP is enabled. disabled(2):PRIP is disabled." ::= { ipeCfgPripEntry 3 } ipeCfgPripUdpPort OBJECT-TYPE SYNTAX INTEGER { ripdefaultport(520), pripdefaultport(8520) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting of UDP port number used with PRIP. Either of 8520 or 520 is set. This setting is valid since PRIP will start next time." ::= { ipeCfgPripEntry 4 } ipeCfgPripPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgPripPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PRIP set up information table.(per port)" ::= { ipeCfgPripGroup 2 } ipeCfgPripPortEntry OBJECT-TYPE SYNTAX IpeCfgPripPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of PRIP set up information table.(per port)" INDEX { ipeCfgPripPortIfIndex } ::= { ipeCfgPripPortTable 1 } IpeCfgPripPortEntry ::= SEQUENCE { ipeCfgPripPortIfIndex InterfaceIndex, ipeCfgPripPortNEAddress IpAddress, ipeCfgPripPortEnable INTEGER, ipeCfgPripPortPropagateNetEnable INTEGER } ipeCfgPripPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgPripPortEntry 1 } ipeCfgPripPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgPripPortEntry 2 } ipeCfgPripPortEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting of some port when PRIP will be enabled. enabled(1) : this port is enabled. disabled(2) : this port is disable." ::= { ipeCfgPripPortEntry 3 } ipeCfgPripPortPropagateNetEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Propagate setting for neighbor NE. enabled(1) : this port is propagated. disabled(2) : this port is not propagated. (Do not register in the RIP route.)" ::= { ipeCfgPripPortEntry 4 } ipeCfgNaptGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 18 } ipeCfgNaptTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgNaptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "NAPT set up information table." ::= { ipeCfgNaptGroup 1 } ipeCfgNaptEntry OBJECT-TYPE SYNTAX IpeCfgNaptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of NAPT set up information table." INDEX { ipeCfgNaptIndex } ::= { ipeCfgNaptTable 1 } IpeCfgNaptEntry ::= SEQUENCE { ipeCfgNaptIndex Integer32, ipeCfgNaptNEAddress IpAddress, ipeCfgNaptEnable INTEGER } ipeCfgNaptIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgNaptEntry 1 } ipeCfgNaptNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgNaptEntry 2 } ipeCfgNaptEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Address translation invalid effective/setting by NAPT. value range: enabled disabled" ::= { ipeCfgNaptEntry 3 } ipeCfgStaticRouteGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 19 } ipeCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static Routing set up information table." ::= { ipeCfgStaticRouteGroup 1 } ipeCfgStaticRouteEntry OBJECT-TYPE SYNTAX IpeCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of Static Routing set up information table." INDEX { ipeCfgRouteIndex } ::= { ipeCfgStaticRouteTable 1 } IpeCfgStaticRouteEntry ::= SEQUENCE { ipeCfgRouteIndex Integer32, ipeCfgRouteNEAddress IpAddress, ipeCfgRouteDest IpAddress, ipeCfgRouteMask IpAddress, ipeCfgRouteNextHop IpAddress, ipeCfgRouteRowStatus RowStatus } ipeCfgRouteIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgStaticRouteEntry 1 } ipeCfgRouteNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgStaticRouteEntry 2 } ipeCfgRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Static routing object destination address. When masking in ipeCfgRouteMask, the host address part has to be a zero, if any. Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255) The value acquisition when unsetting it returns NoSuchObject." ::= { ipeCfgStaticRouteEntry 3 } ipeCfgRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Static routing object subnet mask. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000-0xffffffff(0-32bit) Only when ipeCfgRouteDest is 0, 0bit is allowed. The value acquisition when unsetting it returns NoSuchObject." ::= { ipeCfgStaticRouteEntry 4 } ipeCfgRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Static routing object gateway address. Value range:0x00000001 - 0xdfffffff(0.0.0.1 - 223.255.255.255) The value acquisition when unsetting it returns NoSuchObject." ::= { ipeCfgStaticRouteEntry 5 } ipeCfgRouteRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only 'active(1)'. 1) creating a entry When you make a new entry, you must SET objects indicated below. * ipeCfgRouteDest * ipeCfgRouteMask * ipeCfgRouteNextHop * ipeCfgRouteRowStatus <- createAndGo(4) 2) modifing a entry When you make a existing entry, you must SET objects indicated below. * ipeCfgRouteDest * ipeCfgRouteMask * ipeCfgRouteNextHop 3) deleting a entry When you SET a destroy(6) to ipeCfgRouteRowStatus, the entry is destroyed. * ipeCfgRouteRowStatus <- destory(6)" ::= { ipeCfgStaticRouteEntry 6 } ipeCfgAccessListGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 21 } ipeCfgAccessListRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAccessListRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Access List(Rule)." ::= { ipeCfgAccessListGroup 1 } ipeCfgAccessListRuleEntry OBJECT-TYPE SYNTAX IpeCfgAccessListRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Access List(Rule)." INDEX { ipeCfgAccessListRuleEnableIndex } ::= { ipeCfgAccessListRuleTable 1 } IpeCfgAccessListRuleEntry ::= SEQUENCE { ipeCfgAccessListRuleEnableIndex Integer32, ipeCfgAccessListRuleNEAddress IpAddress, ipeCfgAccessListInputRuleEnable INTEGER, ipeCfgAccessListForwardRuleEnable INTEGER, ipeCfgAccessListInputDefaultAction INTEGER, ipeCfgAccessListForwardDefaultAction INTEGER } ipeCfgAccessListRuleEnableIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgAccessListRuleEntry 1 } ipeCfgAccessListRuleNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAccessListRuleEntry 2 } ipeCfgAccessListInputRuleEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Access Control Input Filter Rule" ::= { ipeCfgAccessListRuleEntry 3 } ipeCfgAccessListForwardRuleEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Access Control Forwarding Filter Rule" ::= { ipeCfgAccessListRuleEntry 4 } ipeCfgAccessListInputDefaultAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Access Control Input Default Action." ::= { ipeCfgAccessListRuleEntry 5 } ipeCfgAccessListForwardDefaultAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Access Control Forwarding Default Action" ::= { ipeCfgAccessListRuleEntry 6 } ipeCfgAccessListInputTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAccessListInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Access List(Input Direction)." ::= { ipeCfgAccessListGroup 2 } ipeCfgAccessListInputEntry OBJECT-TYPE SYNTAX IpeCfgAccessListInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Access List(Input Direction)." INDEX { ipeCfgAccessListInputOrderNum } ::= { ipeCfgAccessListInputTable 1 } IpeCfgAccessListInputEntry ::= SEQUENCE { ipeCfgAccessListInputOrderNum Integer32, ipeCfgAccessListInputNEAddress IpAddress, ipeCfgAccessListInputInIfIndex INTEGER, ipeCfgAccessListInputSrcIpAddress IpAddress, ipeCfgAccessListInputSrcNetMask IpAddress, ipeCfgAccessListInputProtocol Integer32, ipeCfgAccessListInputDstPortNum Integer32, ipeCfgAccessListInputAction INTEGER, ipeCfgAccessListInputRowStatus RowStatus } ipeCfgAccessListInputOrderNum OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of table(1-50)." ::= { ipeCfgAccessListInputEntry 1 } ipeCfgAccessListInputNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAccessListInputEntry 2 } ipeCfgAccessListInputInIfIndex OBJECT-TYPE SYNTAX INTEGER { any(0), inband(3), ne2(4), bridge1(11), bridge2(12), bridge3(13), bridge4(14), bridge5(15), bridge6(16), bridge7(17), bridge8(18), bridge9(19), bridge10(20), bridge11(21), bridge12(22), bridge13(23), bridge14(24), bridge15(25), bridge16(26), bridge17(27), bridge18(28), bridge19(29), bridge20(30) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Input Filter Interface. The value 'inband' is not supported." ::= { ipeCfgAccessListInputEntry 3 } ipeCfgAccessListInputSrcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Input Filter Source IP Address" ::= { ipeCfgAccessListInputEntry 4 } ipeCfgAccessListInputSrcNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Input Filter Source Subnet Mask. '0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'." ::= { ipeCfgAccessListInputEntry 5 } ipeCfgAccessListInputProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Input Filter Protocol. '-1' acts as 'Any'." ::= { ipeCfgAccessListInputEntry 6 } ipeCfgAccessListInputDstPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Input Filter Port Number. '-1' acts as 'Any'." ::= { ipeCfgAccessListInputEntry 7 } ipeCfgAccessListInputAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Input Filter Action." ::= { ipeCfgAccessListInputEntry 8 } ipeCfgAccessListInputRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only 'active(1)'. 1) creating a entry When you make a new entry, you must SET objects indicated below. ipeCfgAccessListInputAction ipeCfgAccessListInputRowStatus <- createAndGo(4) When you are not setting a value of items as follows, it is set as 'any'. ipeCfgAccessListInputInIfIndex ipeCfgAccessListInputSrcIpAddress ipeCfgAccessListInputSrcNetMask(*1) ipeCfgAccessListInputProtocol ipeCfgAccessListInputDstPortNum(*2) *1 When you not set ipeCfgAccessListInputSrcIpAddress, even when ipeCfgAccessListInputSrcNetMask is set, it is set as 'any'.When ipeCfgAccessListInputSrcIpAddress set to 'any', ipeCfgAccessListInputSrcNetMask is set as 'any'. *2 When you not set ipeCfgAccessListInputProtocol to '6' or '17', even when ipeCfgAccessListInputDstPortNum is set, it is set as 'any'. 2) modifing a entry It isn't possible. 3) deleting a entry When you SET a destroy(6) to ipeCfgAccessListInputRowStatus, the entry is destroyed." ::= { ipeCfgAccessListInputEntry 9 } ipeCfgAccessListForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAccessListForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Access List(Forward Direction)." ::= { ipeCfgAccessListGroup 3 } ipeCfgAccessListForwardEntry OBJECT-TYPE SYNTAX IpeCfgAccessListForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Access List(Forward Direction)." INDEX { ipeCfgAccessListForwardOrderNum } ::= { ipeCfgAccessListForwardTable 1 } IpeCfgAccessListForwardEntry ::= SEQUENCE { ipeCfgAccessListForwardOrderNum Integer32, ipeCfgAccessListForwardNEAddress IpAddress, ipeCfgAccessListForwardInIfIndex INTEGER, ipeCfgAccessListForwardOutIfIndex INTEGER, ipeCfgAccessListForwardSrcIpAddress IpAddress, ipeCfgAccessListForwardSrcNetMask IpAddress, ipeCfgAccessListForwardDstIpAddress IpAddress, ipeCfgAccessListForwardDstNetMask IpAddress, ipeCfgAccessListForwardProtocol Integer32, ipeCfgAccessListForwardSrcPortNum Integer32, ipeCfgAccessListForwardDstPortNum Integer32, ipeCfgAccessListForwardAction INTEGER, ipeCfgAccessListForwardRowStatus RowStatus } ipeCfgAccessListForwardOrderNum OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of table(1-50)." ::= { ipeCfgAccessListForwardEntry 1 } ipeCfgAccessListForwardNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAccessListForwardEntry 2 } ipeCfgAccessListForwardInIfIndex OBJECT-TYPE SYNTAX INTEGER { any(0), inband(3), ne2(4), bridge1(11), bridge2(12), bridge3(13), bridge4(14), bridge5(15), bridge6(16), bridge7(17), bridge8(18), bridge9(19), bridge10(20), bridge11(21), bridge12(22), bridge13(23), bridge14(24), bridge15(25), bridge16(26), bridge17(27), bridge18(28), bridge19(29), bridge20(30) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Input" ::= { ipeCfgAccessListForwardEntry 3 } ipeCfgAccessListForwardOutIfIndex OBJECT-TYPE SYNTAX INTEGER { any(0), inband(3), ne2(4), bridge1(11), bridge2(12), bridge3(13), bridge4(14), bridge5(15), bridge6(16), bridge7(17), bridge8(18), bridge9(19), bridge10(20), bridge11(21), bridge12(22), bridge13(23), bridge14(24), bridge15(25), bridge16(26), bridge17(27), bridge18(28), bridge19(29), bridge20(30) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Output Interface. The value 'inband' is not supporte" ::= { ipeCfgAccessListForwardEntry 4 } ipeCfgAccessListForwardSrcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Source IP Address." ::= { ipeCfgAccessListForwardEntry 5 } ipeCfgAccessListForwardSrcNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Source Subnet Mask. '0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'" ::= { ipeCfgAccessListForwardEntry 6 } ipeCfgAccessListForwardDstIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Destination IP Address." ::= { ipeCfgAccessListForwardEntry 7 } ipeCfgAccessListForwardDstNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Destination Subnet Mask. '0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'." ::= { ipeCfgAccessListForwardEntry 8 } ipeCfgAccessListForwardProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Protocol. '-1' acts as 'Any'." ::= { ipeCfgAccessListForwardEntry 9 } ipeCfgAccessListForwardSrcPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Source Port Number. '-1' acts as 'Any'." ::= { ipeCfgAccessListForwardEntry 10 } ipeCfgAccessListForwardDstPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Destination Port Number. '-1' acts as 'Any'." ::= { ipeCfgAccessListForwardEntry 11 } ipeCfgAccessListForwardAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP Access Control Forward Filter Action." ::= { ipeCfgAccessListForwardEntry 12 } ipeCfgAccessListForwardRowStatus OBJECT-TYPE SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This RowStatus has a status only 'active(1)'. 1) creating a entry When you make a new entry, you must SET objects indicated below. ipeCfgAccessListForwardAction ipeCfgAccessListForwardRowStatus <- createAndGo(4) When you are not setting a value of items as follows, it is set as 'any'. ipeCfgAccessListForwardInIfIndex ipeCfgAccessListForwardOutIfIndex ipeCfgAccessListForwardSrcIpAddress ipeCfgAccessListForwardSrcNetMask(*1) ipeCfgAccessListForwardDstIpAddress ipeCfgAccessListForwardDstNetMask(*2) ipeCfgAccessListForwardProtocol ipeCfgAccessListForwardSrcPortNum(*3) ipeCfgAccessListForwardDstPortNum(*3) *1 When you not set ipeCfgAccessListForwardSrcIpAddress, even when ipeCfgAccessListForwardSrcNetMask is set, it is set as 'any'.When ipeCfgAccessListForwardSrcIpAddress set to 'any', ipeCfgAccessListForwardSrcNetMask is set as 'any'. *2 When you not set ipeCfgAccessListForwardDstIpAddress, even when ipeCfgAccessListForwardDstNetMask is set, it is set as 'any'.When ipeCfgAccessListForwardDstIpAddress set to 'any', ipeCfgAccessListForwardDstNetMask is set as 'any'. *3 When you not set ipeCfgAccessListForwardProtocol to '6' or '17',, even when ipeCfgAccessListForwardSrcPortNum and ipeCfgAccessListForwardDstPortNum are set, it is set as 'any'. 2) modifing a entry It isn't possible. 3) deleting a entry When you SET a destroy(6) to ipeCfgAccessListForwardRowStatus, the entry is destroyed." ::= { ipeCfgAccessListForwardEntry 13 } ipeCfgAutoIpGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 22 } ipeCfgAutoIpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgAutoIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of AutoIP configuration information." ::= { ipeCfgAutoIpGroup 1 } ipeCfgAutoIpEntry OBJECT-TYPE SYNTAX IpeCfgAutoIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of AutoIP configuration information." INDEX { ipeCfgAutoIpIndex } ::= { ipeCfgAutoIpTable 1 } IpeCfgAutoIpEntry ::= SEQUENCE { ipeCfgAutoIpIndex Integer32, ipeCfgAutoIpNEAddress IpAddress, ipeCfgAutoIpNetworkAddress IpAddress, ipeCfgAutoIpNetMask IpAddress } ipeCfgAutoIpIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgAutoIpEntry 1 } ipeCfgAutoIpNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgAutoIpEntry 2 } ipeCfgAutoIpNetworkAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregation Net of AutoIP. A set value becomes a binary. Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255) If this value is changed in state of 'now setting' or 'automatic setting', AutoIP will set IP Address again." ::= { ipeCfgAutoIpEntry 3 } ipeCfgAutoIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregation NetMask of AutoIp. A set value becomes a binary. Value range:0x80000000-0xfffffffc(1-30bit) If this value is changed in state of 'now setting' or 'automatic setting', AutoIP will set IP Address again." ::= { ipeCfgAutoIpEntry 4 } ipeCfgSysNE1PortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgSysNE1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "NE1 Port Mode Configuration Table." ::= { ipeConfigurationGroup 25 } ipeCfgSysNE1PortEntry OBJECT-TYPE SYNTAX IpeCfgSysNE1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ipeCfgSysNE1PortIndex } ::= { ipeCfgSysNE1PortTable 1 } IpeCfgSysNE1PortEntry ::= SEQUENCE { ipeCfgSysNE1PortIndex Integer32, ipeCfgSysNE1PortNEAddress IpAddress, ipeCfgSysNE1PortMode INTEGER } ipeCfgSysNE1PortIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgSysNE1PortEntry 1 } ipeCfgSysNE1PortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgSysNE1PortEntry 2 } ipeCfgSysNE1PortMode OBJECT-TYPE SYNTAX INTEGER { invalid(0), userPort(1), mgmtPort(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NE1 Port Mode Configuration" DEFVAL { userPort } ::= { ipeCfgSysNE1PortEntry 3 } ipeCfgRadiusGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 27 } ipeCfgRadiusGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgRadiusGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure RADIUS parameters." ::= { ipeCfgRadiusGroup 1 } ipeCfgRadiusGeneralEntry OBJECT-TYPE SYNTAX IpeCfgRadiusGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "..." INDEX { ipeCfgRadiusGeneralIndex } ::= { ipeCfgRadiusGeneralTable 1 } IpeCfgRadiusGeneralEntry ::= SEQUENCE { ipeCfgRadiusGeneralIndex Integer32, ipeCfgRadiusGeneralNEAddress IpAddress, ipeCfgRadiusGeneralAuthClientRetransmit Integer32, ipeCfgRadiusGeneralAuthClientTimeout Integer32 } ipeCfgRadiusGeneralIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgRadiusGeneralEntry 1 } ipeCfgRadiusGeneralNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved object for northbound interface." ::= { ipeCfgRadiusGeneralEntry 2 } ipeCfgRadiusGeneralAuthClientRetransmit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate maximum retransmit number of Access-Request message. The system retransmits Access-Request message to server according to this configuration." DEFVAL { 3 } ::= { ipeCfgRadiusGeneralEntry 3 } ipeCfgRadiusGeneralAuthClientTimeout OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate timeout period for response to Access-Request message. In case response (Access-Accept message) is not received in this period, the system will retransmit message." DEFVAL { 10 } ::= { ipeCfgRadiusGeneralEntry 4 } ipeCfgRadiusAuthServerExtTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgRadiusAuthServerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure RADIUS authentication server parameters." ::= { ipeCfgRadiusGroup 2 } ipeCfgRadiusAuthServerExtEntry OBJECT-TYPE SYNTAX IpeCfgRadiusAuthServerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "..." INDEX { ipeCfgRadiusAuthServerExtIndex } ::= { ipeCfgRadiusAuthServerExtTable 1 } IpeCfgRadiusAuthServerExtEntry ::= SEQUENCE { ipeCfgRadiusAuthServerExtIndex Integer32, ipeCfgRadiusAuthServerNEAddress IpAddress, ipeCfgRadiusAuthServerAddressType INTEGER, ipeCfgRadiusAuthServerAddress IpAddress, ipeCfgRadiusAuthClientServerPortNumber Integer32, ipeCfgRadiusAuthClientPasswordType INTEGER, ipeCfgRadiusAuthClientSecretKey DisplayString, ipeCfgRadiusAuthServerExtRowStatus RowStatus } ipeCfgRadiusAuthServerExtIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgRadiusAuthServerExtEntry 1 } ipeCfgRadiusAuthServerNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved object for northbound interface." ::= { ipeCfgRadiusAuthServerExtEntry 2 } ipeCfgRadiusAuthServerAddressType OBJECT-TYPE SYNTAX INTEGER { invalid(0), ipv4(1), ipv6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate IP address type of this server. ipv4 : server has IPv4 address. ipv6 : server has IPv6 address. (NOT SUPPORTED) ipv6 will be supprted in future version." DEFVAL { ipv4 } ::= { ipeCfgRadiusAuthServerExtEntry 3 } ipeCfgRadiusAuthServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate IP address of this server." ::= { ipeCfgRadiusAuthServerExtEntry 4 } ipeCfgRadiusAuthClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate port number of RADIUS authentication protocol on this server." DEFVAL { 1812 } ::= { ipeCfgRadiusAuthServerExtEntry 5 } ipeCfgRadiusAuthClientPasswordType OBJECT-TYPE SYNTAX INTEGER { invalid(0), user(1), chap(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate password authentication type. The system select password attribute on Access-Request message. user : use User-Password attribute. chap : use CHAP-Password attribute. See RFC 2865 for details." DEFVAL { user } ::= { ipeCfgRadiusAuthServerExtEntry 6 } ipeCfgRadiusAuthClientSecretKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate RADIUS shared secret encrypted by blowfish. This object is used to confirm received RADIUS message is sent from authenticated server. This object is also used to encrypt User-Password attribute on Access-Request message. See RFC 2865 for details. The secret key(before encryption) range is 1-63 characters. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgRadiusAuthServerExtEntry 7 } ipeCfgRadiusAuthServerExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this table." ::= { ipeCfgRadiusAuthServerExtEntry 8 } ipeCfgRadiusPrivLevelGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgRadiusPrivLevelGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure general privilege level for RADIUS authetication." ::= { ipeCfgRadiusGroup 3 } ipeCfgRadiusPrivLevelGeneralEntry OBJECT-TYPE SYNTAX IpeCfgRadiusPrivLevelGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "..." INDEX { ipeCfgRadiusPrivLevelGeneralIndex } ::= { ipeCfgRadiusPrivLevelGeneralTable 1 } IpeCfgRadiusPrivLevelGeneralEntry ::= SEQUENCE { ipeCfgRadiusPrivLevelGeneralIndex Integer32, ipeCfgRadiusPrivLevelGeneralNEAddress IpAddress, ipeCfgRadiusPrivLevelGeneralDefaultAction INTEGER, ipeCfgRadiusPrivLevelGeneralDefaultGroup DisplayString } ipeCfgRadiusPrivLevelGeneralIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgRadiusPrivLevelGeneralEntry 1 } ipeCfgRadiusPrivLevelGeneralNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved object for northbound interface." ::= { ipeCfgRadiusPrivLevelGeneralEntry 2 } ipeCfgRadiusPrivLevelGeneralDefaultAction OBJECT-TYPE SYNTAX INTEGER { invalid(0), denyLogin(1), useDefaultGroup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate system default action in case privilege level is not specified on Access-Accept message or received privilege level is set to disable in ipeCfgRadiusGroupPrivLevelMappingEnable. denyLogin : deny login. useDefaultGroup : use group specified in ipeCfgRadiusPrivLevelGeneralDefaultGroup." DEFVAL { useDefaultGroup } ::= { ipeCfgRadiusPrivLevelGeneralEntry 3 } ipeCfgRadiusPrivLevelGeneralDefaultGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate default group in case privilege level is not specified. This object is effective only if ipeCfgRadiusPrivLevelGeneralDefaultAction is useDefaultGroup. The value of this object should be registered group name in the system (as ipeCfgAccountGroupName). The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." DEFVAL { "Operator" } ::= { ipeCfgRadiusPrivLevelGeneralEntry 4 } ipeCfgRadiusGroupPrivLevelMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgRadiusGroupPrivLevelMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure privilege level mapping for RADIUS authentication." ::= { ipeCfgRadiusGroup 4 } ipeCfgRadiusGroupPrivLevelMappingEntry OBJECT-TYPE SYNTAX IpeCfgRadiusGroupPrivLevelMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "..." INDEX { ipeCfgRadiusGroupPrivLevelMappingPrivLevel } ::= { ipeCfgRadiusGroupPrivLevelMappingTable 1 } IpeCfgRadiusGroupPrivLevelMappingEntry ::= SEQUENCE { ipeCfgRadiusGroupPrivLevelMappingPrivLevel Integer32, ipeCfgRadiusGroupPrivLevelMappingNEAddress IpAddress, ipeCfgRadiusGroupPrivLevelMappingEnable INTEGER, ipeCfgRadiusGroupPrivLevelMappingGroup DisplayString } ipeCfgRadiusGroupPrivLevelMappingPrivLevel OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this table. The value corresponds to received privilege level on Access-Accept message." ::= { ipeCfgRadiusGroupPrivLevelMappingEntry 1 } ipeCfgRadiusGroupPrivLevelMappingNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved object for northbound interface." ::= { ipeCfgRadiusGroupPrivLevelMappingEntry 2 } ipeCfgRadiusGroupPrivLevelMappingEnable OBJECT-TYPE SYNTAX INTEGER { invalid(0), disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable privilege level mapping on this privilege level. disable : privilege level mapping is disabled. enable : privilege level mapping is enabled. The system default value of this object shown below. PrivLevel=1, 7, 15 : enable other PrivLevel : disable In case this object is set to disable, the system behave according to ipeCfgRadiusPrivLevelGeneralDefaultAction." DEFVAL { disable } ::= { ipeCfgRadiusGroupPrivLevelMappingEntry 3 } ipeCfgRadiusGroupPrivLevelMappingGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate group name correspond to privilege level. This object is effective only if ipeCfgRadiusGroupPrivLevelMappingEnable is enable. When the system received Access-Accept message with certain privilege level, login user has same privilege as this group. The system default value of this object shown below. PrivLevel=1 : Operator PrivLevel=7 : Config PrivLevel=15 : Admin The value should be registered group name registerd in the system (as ipeCfgAccountGroupName). The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'." ::= { ipeCfgRadiusGroupPrivLevelMappingEntry 4 } ipeCfgLldpGroup OBJECT IDENTIFIER ::= { ipeConfigurationGroup 28 } ipeCfgLldpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeCfgLldpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP set up information table." ::= { ipeCfgLldpGroup 1 } ipeCfgLldpEntry OBJECT-TYPE SYNTAX IpeCfgLldpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of LLDP set up information table." INDEX { ipeCfgLldpIndex } ::= { ipeCfgLldpTable 1 } IpeCfgLldpEntry ::= SEQUENCE { ipeCfgLldpIndex Integer32, ipeCfgLldpNEAddress IpAddress, ipeCfgLldpProprietaryModeMacAddress MacAddress } ipeCfgLldpIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeCfgLldpEntry 1 } ipeCfgLldpNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeCfgLldpEntry 2 } ipeCfgLldpProprietaryModeMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address of LLDP Frame in NEC mode. This object is effective only if ipeCfgPortXXXXXLldpMode is set to proprietaryMode." DEFVAL { '01004c01da50'h } ::= { ipeCfgLldpEntry 3 } ipeCommunicationsGroup OBJECT IDENTIFIER ::= { system5 4 } ipeNeighborInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeNeighborInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Neighbor NE table." ::= { ipeCommunicationsGroup 1 } ipeNeighborInfoEntry OBJECT-TYPE SYNTAX IpeNeighborInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Neighbor NE entry." INDEX { ipeNeighborInfoIndex } ::= { ipeNeighborInfoTable 1 } IpeNeighborInfoEntry ::= SEQUENCE { ipeNeighborInfoIndex InterfaceIndex, ipeNeighborInfoNEAddress IpAddress, ipeNeighborIpAddress OCTET STRING } ipeNeighborInfoIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeNeighborInfoEntry 1 } ipeNeighborInfoNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeNeighborInfoEntry 2 } ipeNeighborIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..240)) MAX-ACCESS read-only STATUS current DESCRIPTION "[iPASOLINK200/400/1000series/EX/iX] Neighbor NE is displayed as unit of registration every eight bytes of Internet Protocol address (4byte) + Node TYPE(4byte).The number of maximum registration is 30 (240byte). attention: ne2 set the IpAddress only, do not set the Node type. [iPASOLINK VR series] The number of maximum registration is 13. Type(1byte) and Length(1byte) are common information is 2byte. Unit of registration of each neighbor as IPv4 Address(4bytes) + Node Type(4bytes) + MAC Address(6bytes) + ifindex(4bytes)." ::= { ipeNeighborInfoEntry 3 } ipeStatusGroup OBJECT IDENTIFIER ::= { system5 6 } ipeStsNtp OBJECT IDENTIFIER ::= { ipeStatusGroup 1 } ipeStsNtpStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsNtpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of NTP statistics." ::= { ipeStsNtp 1 } ipeStsNtpStatisticsEntry OBJECT-TYPE SYNTAX IpeStsNtpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of NTP statistics." INDEX { ipeStsNtpStatisticsIndex } ::= { ipeStsNtpStatisticsTable 1 } IpeStsNtpStatisticsEntry ::= SEQUENCE { ipeStsNtpStatisticsIndex Integer32, ipeStsNtpStatisticsNEAddress IpAddress, ipeStsNtpSyncStatusInfo OCTET STRING, ipeStsNtpSetTime INTEGER } ipeStsNtpStatisticsIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsNtpStatisticsEntry 1 } ipeStsNtpStatisticsNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsNtpStatisticsEntry 2 } ipeStsNtpSyncStatusInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "Synchronous state information." ::= { ipeStsNtpStatisticsEntry 3 } ipeStsNtpSetTime OBJECT-TYPE SYNTAX INTEGER { notSetManually(0), setManually(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Presence of time manual setting." ::= { ipeStsNtpStatisticsEntry 4 } ipeStsFtp OBJECT IDENTIFIER ::= { ipeStatusGroup 2 } ipeStsFtpStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsFtpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of FTP status." ::= { ipeStsFtp 1 } ipeStsFtpStatusEntry OBJECT-TYPE SYNTAX IpeStsFtpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of FTP status." INDEX { ipeStsFtpStatusIndex } ::= { ipeStsFtpStatusTable 1 } IpeStsFtpStatusEntry ::= SEQUENCE { ipeStsFtpStatusIndex Integer32, ipeStsFtpStatusNEAddress IpAddress, ipeStsFtpStatusLoginUser DisplayString, ipeStsFtpStatusLoginIpAddress IpAddress, ipeStsFtpStatusSessionId Integer32 } ipeStsFtpStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsFtpStatusEntry 1 } ipeStsFtpStatusNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsFtpStatusEntry 2 } ipeStsFtpStatusLoginUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Connected user." ::= { ipeStsFtpStatusEntry 3 } ipeStsFtpStatusLoginIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of Connected user ." ::= { ipeStsFtpStatusEntry 4 } ipeStsFtpStatusSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session information of Connected User." ::= { ipeStsFtpStatusEntry 5 } ipeStsSftp OBJECT IDENTIFIER ::= { ipeStatusGroup 3 } ipeStsSftpStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsSftpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SFTP status ." ::= { ipeStsSftp 1 } ipeStsSftpStatusEntry OBJECT-TYPE SYNTAX IpeStsSftpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of SFTP status ." INDEX { ipeStsSftpStatusIndex } ::= { ipeStsSftpStatusTable 1 } IpeStsSftpStatusEntry ::= SEQUENCE { ipeStsSftpStatusIndex Integer32, ipeStsSftpStatusNEAddress IpAddress, ipeStsSftpStatusLoginUser DisplayString, ipeStsSftpStatusLoginIpAddress IpAddress, ipeStsSftpStatusSessionId Integer32 } ipeStsSftpStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsSftpStatusEntry 1 } ipeStsSftpStatusNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsSftpStatusEntry 2 } ipeStsSftpStatusLoginUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Connected user." ::= { ipeStsSftpStatusEntry 3 } ipeStsSftpStatusLoginIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of Connected user ." ::= { ipeStsSftpStatusEntry 4 } ipeStsSftpStatusSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session information of Connected User." ::= { ipeStsSftpStatusEntry 5 } ipeStsHttp OBJECT IDENTIFIER ::= { ipeStatusGroup 4 } ipeStsHttpStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsHttpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of HTTP status." ::= { ipeStsHttp 1 } ipeStsHttpStatusEntry OBJECT-TYPE SYNTAX IpeStsHttpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of HTTP status." INDEX { ipeStsHttpStatusIndex } ::= { ipeStsHttpStatusTable 1 } IpeStsHttpStatusEntry ::= SEQUENCE { ipeStsHttpStatusIndex Integer32, ipeStsHttpStatusNEAddress IpAddress, ipeStsHttpStatusLoginUser DisplayString, ipeStsHttpStatusLoginIpAddress IpAddress, ipeStsHttpStatusSessionId Integer32 } ipeStsHttpStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsHttpStatusEntry 1 } ipeStsHttpStatusNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsHttpStatusEntry 2 } ipeStsHttpStatusLoginUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Connected user." ::= { ipeStsHttpStatusEntry 3 } ipeStsHttpStatusLoginIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of Connected user ." ::= { ipeStsHttpStatusEntry 4 } ipeStsHttpStatusSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session information of Connected User." ::= { ipeStsHttpStatusEntry 5 } ipeStsHttps OBJECT IDENTIFIER ::= { ipeStatusGroup 5 } ipeStsHttpsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsHttpsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of HTTPS status." ::= { ipeStsHttps 1 } ipeStsHttpsStatusEntry OBJECT-TYPE SYNTAX IpeStsHttpsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of HTTPS status." INDEX { ipeStsHttpsStatusIndex } ::= { ipeStsHttpsStatusTable 1 } IpeStsHttpsStatusEntry ::= SEQUENCE { ipeStsHttpsStatusIndex Integer32, ipeStsHttpsStatusNEAddress IpAddress, ipeStsHttpsStatusLoginUser DisplayString, ipeStsHttpsStatusLoginIpAddress IpAddress, ipeStsHttpsStatusSessionId Integer32 } ipeStsHttpsStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsHttpsStatusEntry 1 } ipeStsHttpsStatusNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsHttpsStatusEntry 2 } ipeStsHttpsStatusLoginUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Connected user." ::= { ipeStsHttpsStatusEntry 3 } ipeStsHttpsStatusLoginIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of Connected user." ::= { ipeStsHttpsStatusEntry 4 } ipeStsHttpsStatusSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session information of Connected User." ::= { ipeStsHttpsStatusEntry 5 } ipeStsStp OBJECT IDENTIFIER ::= { ipeStatusGroup 6 } ipeStsStpBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsStpBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of STP status." ::= { ipeStsStp 1 } ipeStsStpBridgeEntry OBJECT-TYPE SYNTAX IpeStsStpBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of STP status." INDEX { ipeStsStpBridgeIndex } ::= { ipeStsStpBridgeTable 1 } IpeStsStpBridgeEntry ::= SEQUENCE { ipeStsStpBridgeIndex Integer32, ipeStsStpBridgeNEAddress IpAddress, ipeStsStpBridgeProtocolSpecification INTEGER, ipeStsStpBridgeDesignatedRoot BridgeId, ipeStsStpBridgeRootCost Integer32, ipeStsStpBridgeRootPort Integer32, ipeStsStpBridgeMaxAge Timeout, ipeStsStpBridgeHelloTime Timeout, ipeStsStpBridgeForwardDelay Timeout } ipeStsStpBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsStpBridgeEntry 1 } ipeStsStpBridgeNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsStpBridgeEntry 2 } ipeStsStpBridgeProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined. It's a fixed Ieee8021d(3)." ::= { ipeStsStpBridgeEntry 3 } ipeStsStpBridgeDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { ipeStsStpBridgeEntry 4 } ipeStsStpBridgeRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of the path to the root as seen from this bridge." ::= { ipeStsStpBridgeEntry 5 } ipeStsStpBridgeRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." ::= { ipeStsStpBridgeEntry 6 } ipeStsStpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." ::= { ipeStsStpBridgeEntry 7 } ipeStsStpBridgeHelloTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." ::= { ipeStsStpBridgeEntry 8 } ipeStsStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database." ::= { ipeStsStpBridgeEntry 9 } ipeStsStpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsStpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of STP port status. When the system is running on the mplsTp mode, this table may return wrong value. (must not use this table on mplsTp mode)." ::= { ipeStsStp 2 } ipeStsStpPortEntry OBJECT-TYPE SYNTAX IpeStsStpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of STP port status table." INDEX { ipeStsStpPortIfIndex, ipeStsStpPortBridgeIndex } ::= { ipeStsStpPortTable 1 } IpeStsStpPortEntry ::= SEQUENCE { ipeStsStpPortIfIndex InterfaceIndex, ipeStsStpPortBridgeIndex Integer32, ipeStsStpPortNEAddress IpAddress, ipeStsStpPortPortState INTEGER, ipeStsStpPortDesignatedRoot BridgeId, ipeStsStpPortDesignatedCost Integer32, ipeStsStpPortDesignatedBridge BridgeId, ipeStsStpPortDesignatedPort OCTET STRING } ipeStsStpPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsStpPortEntry 1 } ipeStsStpPortBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsStpPortEntry 2 } ipeStsStpPortNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsStpPortEntry 3 } ipeStsStpPortPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current state as defined by application of the Spanning Tree Protocol." ::= { ipeStsStpPortEntry 4 } ipeStsStpPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." ::= { ipeStsStpPortEntry 5 } ipeStsStpPortDesignatedCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs." ::= { ipeStsStpPortEntry 6 } ipeStsStpPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." ::= { ipeStsStpPortEntry 7 } ipeStsStpPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2..2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." ::= { ipeStsStpPortEntry 8 } ipeStsPort OBJECT IDENTIFIER ::= { ipeStatusGroup 7 } ipeStsPortEtherTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsPortEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of port status." ::= { ipeStsPort 1 } ipeStsPortEtherEntry OBJECT-TYPE SYNTAX IpeStsPortEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of port status table." INDEX { ipeStsPortEtherIfIndex } ::= { ipeStsPortEtherTable 1 } IpeStsPortEtherEntry ::= SEQUENCE { ipeStsPortEtherIfIndex InterfaceIndex, ipeStsPortEtherNEAddress IpAddress, ipeStsPortEtherLinkUp Integer32, ipeStsPortEtherSpeed Integer32, ipeStsPortEtherDuplex Integer32, ipeStsPortEtherFlowControl Integer32 } ipeStsPortEtherIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsPortEtherEntry 1 } ipeStsPortEtherNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsPortEtherEntry 2 } ipeStsPortEtherLinkUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Up/Down of I/F. value range:1 LinkUp 2 LinkDown" ::= { ipeStsPortEtherEntry 3 } ipeStsPortEtherSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SpeedI of I/F. value range:10 10Mb/s 100 100Mb/s 1000 1000Mb/s" ::= { ipeStsPortEtherEntry 4 } ipeStsPortEtherDuplex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duplex of I/F. value range:1 half duplex 2 full duplex" ::= { ipeStsPortEtherEntry 5 } ipeStsPortEtherFlowControl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "FlowControl of I/F. value range:0 flowctl none 1 receive only 2 transfer only 3 receive and transfer" ::= { ipeStsPortEtherEntry 6 } ipeStsPortNe2Table OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsPortNe2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of NE2 port status table." ::= { ipeStsPort 2 } ipeStsPortNe2Entry OBJECT-TYPE SYNTAX IpeStsPortNe2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of NE2 port status entry." INDEX { ipeStsPortNe2IfIndex } ::= { ipeStsPortNe2Table 1 } IpeStsPortNe2Entry ::= SEQUENCE { ipeStsPortNe2IfIndex InterfaceIndex, ipeStsPortNe2NEAddress IpAddress, ipeStsPortNe2LinkUp Integer32 } ipeStsPortNe2IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsPortNe2Entry 1 } ipeStsPortNe2NEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsPortNe2Entry 2 } ipeStsPortNe2LinkUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Up/Down of I/F." ::= { ipeStsPortNe2Entry 3 } ipeStsBridge OBJECT IDENTIFIER ::= { ipeStatusGroup 8 } ipeStsBridgeFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsBridgeFdbEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Learning MAC table of bridge." ::= { ipeStsBridge 1 } ipeStsBridgeFdbEntry OBJECT-TYPE SYNTAX IpeStsBridgeFdbEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Learning MAC table entry of bridge." INDEX { ipeStsBridgeFdbBridgeIndex, ipeStsBridgeFdbIfIndex, ipeStsBridgeFdbIndex } ::= { ipeStsBridgeFdbTable 1 } IpeStsBridgeFdbEntry ::= SEQUENCE { ipeStsBridgeFdbBridgeIndex Integer32, ipeStsBridgeFdbIfIndex InterfaceIndex, ipeStsBridgeFdbIndex Integer32, ipeStsBridgeFdbNEAddress IpAddress, ipeStsBridgeFdbAddress MacAddress } ipeStsBridgeFdbBridgeIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { ipeStsBridgeFdbEntry 1 } ipeStsBridgeFdbIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { ipeStsBridgeFdbEntry 2 } ipeStsBridgeFdbIndex OBJECT-TYPE SYNTAX Integer32 (1..63) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of this table." ::= { ipeStsBridgeFdbEntry 3 } ipeStsBridgeFdbNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "reserved." ::= { ipeStsBridgeFdbEntry 4 } ipeStsBridgeFdbAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Learning MAC address of bridge. When Snmpwalk is done, it becomes operation like ReadCreate." ::= { ipeStsBridgeFdbEntry 5 } ipeStsAutoIp OBJECT IDENTIFIER ::= { ipeStatusGroup 9 } ipeStsAutoIpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeStsAutoIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of AutoIP status." ::= { ipeStsAutoIp 1 } ipeStsAutoIpEntry OBJECT-TYPE SYNTAX IpeStsAutoIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of AutoIP status table." INDEX { ipeStsAutoIpIndex } ::= { ipeStsAutoIpTable 1 } IpeStsAutoIpEntry ::= SEQUENCE { ipeStsAutoIpIndex Integer32, ipeStsAutoIpNEAddress IpAddress, ipeStsAutoIpState Integer32, ipeStsAutoIpTempAddress IpAddress } ipeStsAutoIpIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeStsAutoIpEntry 1 } ipeStsAutoIpNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeStsAutoIpEntry 2 } ipeStsAutoIpState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "AutoIP state information. Valid Value (1:before setting,2:now setting, 3:automatic setting,4:manual setting)." ::= { ipeStsAutoIpEntry 3 } ipeStsAutoIpTempAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Temporary IP Address of AutoIP setting. initial value = 0.0.0.0 other value = Temporary IP Address If AutoIP state information is 3, Temporary IP Address is valid value." ::= { ipeStsAutoIpEntry 4 } ipeAccessGroup OBJECT IDENTIFIER ::= { system5 7 } ipeAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF IpeAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMP access information." ::= { ipeAccessGroup 1 } ipeAccessEntry OBJECT-TYPE SYNTAX IpeAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of SNMP access information. All OID don't check that a set value is valid or invalid." INDEX { ipeAccessIndex } ::= { ipeAccessTable 1 } IpeAccessEntry ::= SEQUENCE { ipeAccessIndex Integer32, ipeAccessNEAddress IpAddress, ipeAccessUserName DisplayString, ipeAccessFromAddress IpAddress, ipeAccessType INTEGER, ipeAccessSessionId Integer32, ipeAccessErrorCode Integer32 } ipeAccessIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this table." ::= { ipeAccessEntry 1 } ipeAccessNEAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "reserved." ::= { ipeAccessEntry 2 } ipeAccessUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A user name which is used for CTRL-TRAP and logging. When you send SET-Request, it is necessary to SET this OID to first 'variable-bindings' of the SET-Request PDU. Please use an ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'. When this OID is read, 0x00(null) is returned." ::= { ipeAccessEntry 3 } ipeAccessFromAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A source IP address which is used for CTRL-TRAP and logging. The use is optional. When this OID is read, 0.0.0.0 is returned." ::= { ipeAccessEntry 4 } ipeAccessType OBJECT-TYPE SYNTAX INTEGER { invalid(0), nms(1), webLct(2), cli(3), internal(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "A type of connection origin. The use is optional. Whne this OID is read, invalid(0) is returned." ::= { ipeAccessEntry 5 } ipeAccessSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A session ID. The use is optional. When this OID is read, 0 is returned." ::= { ipeAccessEntry 6 } ipeAccessErrorCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Error Code." ::= { ipeAccessEntry 7 } ----------------------------------------------- -- End User MIB Object Definitions ----------------------------------------------- END