-- -- comAtm.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 271 -- Tuesday, April 05, 2005 at 16:59:39 -- ZHONE-COM-ATM-MIB DEFINITIONS ::= BEGIN IMPORTS atmInterfaceDs3PlcpAlarmState, atmInterfaceTCAlarmState, atmTrafficDescrParamEntry, atmVplVpi, atmVplAdminStatus, atmVplOperStatus, atmVplLastChange, atmVplReceiveTrafficDescrIndex, atmVplTransmitTrafficDescrIndex, atmVplCrossConnectIdentifier, atmVplRowStatus, atmVplCastType, atmVplConnKind, atmVclVpi, atmVclVci, atmVclAdminStatus, atmVclOperStatus, atmVclLastChange, atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex, atmVccAalType, atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, atmVccAal5EncapsType, atmVclCrossConnectIdentifier, atmVclEntry, atmVplEntry, atmInterfaceTCEntry, atmVclRowStatus, atmVclCastType, atmVclConnKind, atmVcCrossConnectEntry FROM ATM-MIB AtmVpIdentifier, AtmVcIdentifier FROM ATM-TC-MIB ifIndex, InterfaceIndex FROM IF-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC zhoneAtm, zhoneShelfIndex, zhoneSlotIndex, zhoneModules, zhoneShelfIndex, zhoneSlotIndex FROM Zhone ZhoneRowStatus, ZhoneAdminString FROM Zhone-TC; -- to generate protection layer code, remove all references to Atm_XStats and run this command: -- /vob/zhonetools/bin/pahrser.pl rfc2233.mib rfc2515.mib rfc2514.mib comAtm.mib -- -- -- -- -- comAtmExtension MODULE-IDENTITY LAST-UPDATED "200504051200Z" -- April 05, 2005 at 12:00 GMT ORGANIZATION "Zhone Technologies, Inc." CONTACT-INFO " Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "This is the Zhone module identifier for the Zhone ATM MIB extension module." REVISION "200504051644Z" -- April 05, 2005 at 16:44 GMT DESCRIPTION "01.02.18 - Add zhoneAtmVclExtOamF4Ping and zhoneAtmVclExtOamF4PingStatus." REVISION "200502281318Z" -- February 28, 2005 at 13:18 GMT DESCRIPTION "01.02.17 - Add field zhoneAtmVpiMaxVciPerVp to zhoneAtmVplEntry." REVISION "200409071044Z" -- September 07, 2004 at 10:44 GMT DESCRIPTION "01.02.16 - Deprecate zhonePonExtTable. Move traffic-container-index to AtmVplExtensionTable." REVISION "200406191015Z" -- June 19, 2004 at 10:15 GMT DESCRIPTION "01.02.15 - change atm vcl param12 default. " REVISION "200401281242Z" -- January 28, 2004 at 12:42 GMT DESCRIPTION "01.02.14 - Expand atm vcl rates from 16 to 32." REVISION "200312041523Z" -- December 04, 2003 at 15:23 GMT DESCRIPTION "01.02.13 - Fixed zhoneAtmStatsTotalInitialCellsTx spelling Error." REVISION "200309091411Z" -- September 09, 2003 at 14:11 GMT DESCRIPTION "V01.02.12 - Add traffic container index to Atm Vpl Entry augment." REVISION "200304161604Z" -- April 16, 2003 at 16:04 GMT DESCRIPTION "V01.02.11 - Create an object-identifier to encapsulate the atmVclToMulticastMap objects." REVISION "200303111346Z" -- March 11, 2003 at 13:46 GMT DESCRIPTION "V01.02.10 - Fix typo in markup for Atm_Vcl_To_Multicast_Map_Profile." REVISION "200302141655Z" -- February 14, 2003 at 16:55 GMT DESCRIPTION "V01.02.09 - Add Vpi F4 Ping." REVISION "200302111330Z" -- February 11, 2003 at 13:30 GMT DESCRIPTION "V01.02.08 - Add Vcl Multicast." REVISION "200208231036Z" -- August 23, 2002 at 10:36 GMT DESCRIPTION "V01.02.07 - Changed zhoneAtmV2Traps back to be zhoneAtmTraps child 0 instead of child 1." REVISION "200208131614Z" -- August 13, 2002 at 16:14 GMT DESCRIPTION "V01.02.06 - Added Vpi auto create notification objects." REVISION "200206042013Z" -- June 04, 2002 at 20:13 GMT DESCRIPTION "V01.02.05 - Added zhoneAtmTrafficDescrParamExtCacDivider and zhoneAtmTrafficDescrParamExtUsageParameterControl. Also added RowStatus to zhoneAtmVpiTable." REVISION "200205281212Z" -- May 28, 2002 at 12:12 GMT DESCRIPTION "V01.02.04 - added OAM F5 Ping Status Notification." REVISION "200205211729Z" -- May 21, 2002 at 17:29 GMT DESCRIPTION "V01.02.03 - added manual OAM F5 ping support" REVISION "200205151729Z" -- May 15, 2002 at 17:29 GMT DESCRIPTION "V01.02.02 - added ATM VP Support" REVISION "200203202019Z" -- March 20, 2002 at 20:19 GMT DESCRIPTION "V01.02.01 - added ATM VCL Rates" REVISION "200112191524Z" -- December 19, 2001 at 15:24 GMT DESCRIPTION "V01.02.00 -Added Atm Extended Stats Table" REVISION "200111021722Z" -- November 02, 2001 at 17:22 GMT DESCRIPTION "V01.01.02 - updated description for zhoneAtmTrafficDescrParamExtTrnkVclRate" REVISION "200110291734Z" -- October 29, 2001 at 17:34 GMT DESCRIPTION "V01.01.01 -Added trap atmVclBandwidthUnavailable, removed unused imported parameters and updated description for zhoneAtmTrafficDescrParamExtTrnkVclRate" REVISION "200109201054Z" -- September 20, 2001 at 10:54 GMT DESCRIPTION "V01.01.00 -Added zhoneAtmTrafficDescrParamExtTable" REVISION "200108301715Z" -- August 30, 2001 at 17:15 GMT DESCRIPTION "V01.00.02 - Added traps atmDsx3PlcpAlarmStatusChange and atmInterfaceTCAlarmStateChange" REVISION "200108141200Z" -- August 14, 2001 at 12:00 GMT DESCRIPTION "V01.00.01 - Correct OBJECTS in the atmVclOperStatusChange trap." REVISION "200107111200Z" -- July 11, 2001 at 12:00 GMT DESCRIPTION "V01.00.00 - Initial Release" ::= { zhoneModules 25 } -- -- -- -- Node definitions -- -- 1.3.6.1.4.1.5504.4.2.2 zhoneAtmExtension OBJECT-IDENTITY STATUS current DESCRIPTION "This is the Zhone extension MIB tree to the standard ATM defined by rfc2515." ::= { zhoneAtm 2 } -- 1.3.6.1.4.1.5504.4.2.2.1 zhoneAtmVclExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmVclExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone extension table for the atmVclTable defined in rfc2515." ::= { zhoneAtmExtension 1 } -- 1.3.6.1.4.1.5504.4.2.2.1.1 zhoneAtmVclExtEntry OBJECT-TYPE SYNTAX ZhoneAtmVclExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the atmVclExtTable. atmVclExtEntry is an augmentation to the atmVclEntry defined in rfc2515." AUGMENTS { atmVclEntry } ::= { zhoneAtmVclExtTable 1 } ZhoneAtmVclExtEntry ::= SEQUENCE { zhoneAtmVclExtFaultDetectionType INTEGER, zhoneAtmVclExtOamF5Ping INTEGER, zhoneAtmVclExtOamF5PingStatus TruthValue, zhoneAtmVclExtTrafficContainerIndex Integer32, zhoneAtmVclExtOamF4Ping INTEGER, zhoneAtmVclExtOamF4PingStatus TruthValue } -- -- 1.3.6.1.4.1.5504.4.2.2.1.1.1 zhoneAtmVclExtFaultDetectionType OBJECT-TYPE SYNTAX INTEGER { disabled(1), oamF5Loopback(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to configure VCL fault detection. The valid values are: * disabled - Fault detection is disabled. This is the default. * oamF5Loopback - This option uses standard OAM fault management cells as defined in ITU.610 for fault detection. Automatic loopback diagnostic cells are sent to the IAD. When fault detection is enabled, atmVclOperStatusChange notification trap is used to indicate to the NMS station an VCL has gone down or has come back up. " DEFVAL { disabled } ::= { zhoneAtmVclExtEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.1.1.2 zhoneAtmVclExtOamF5Ping OBJECT-TYPE SYNTAX INTEGER { disabled(1), endToEnd(2), segment(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to send a OAM F5 loopback cell for fault detection. The value will automatically revert to disabled after the set is complete. The valid values are: * disabled - OAM F5 loopback cell is not being sent. This is the default. * endToEnd - This option uses standard OAM fault management cells as defined in ITU.610 for fault detection. Setting this will send a OAM F5 end-to-end loopback cell to be sent * segment - This is not supported at this time " DEFVAL { disabled } ::= { zhoneAtmVclExtEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.1.1.3 zhoneAtmVclExtOamF5PingStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "TRUE if ping was successfull and FALSE if failed" ::= { zhoneAtmVclExtEntry 3 } -- -- 1.3.6.1.4.1.5504.4.2.2.1.1.4 zhoneAtmVclExtTrafficContainerIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Index number of a PON traffic container associated with a VCL definition." DEFVAL { 0 } ::= { zhoneAtmVclExtEntry 4 } -- 1.3.6.1.4.1.5504.4.2.2.1.1.5 zhoneAtmVclExtOamF4Ping OBJECT-TYPE SYNTAX INTEGER { disabled(1), endToEnd(2), segment(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to send a OAM F4 loopback cell for fault detection. The value will automatically revert to disabled after the set is complete. The valid values are: * disabled - OAM F4 loopback cell is not being sent. This is the default. * endToEnd - This option uses standard OAM fault management cells as defined in ITU.610 for fault detection. Setting this will send a OAM F4 end-to-end loopback cell to be sent * segment - This is not supported at this time " DEFVAL { disabled } ::= { zhoneAtmVclExtEntry 5 } -- 1.3.6.1.4.1.5504.4.2.2.1.1.6 zhoneAtmVclExtOamF4PingStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "TRUE if ping was successfull and FALSE if failed." ::= { zhoneAtmVclExtEntry 6 } -- 1.3.6.1.4.1.5504.4.2.2.2 zhoneAtmTraps OBJECT-IDENTITY STATUS current DESCRIPTION "All the Zhone ATM traps will be defined under this OID." ::= { zhoneAtmExtension 2 } -- 1.3.6.1.4.1.5504.4.2.2.2.0 zhoneAtmV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneAtmTraps 0 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.1 atmVclOperStatusChange NOTIFICATION-TYPE OBJECTS { atmVclAdminStatus, atmVclOperStatus, atmVclLastChange } STATUS current DESCRIPTION "A notification is sent when the operational status of an ATM VCL changes. The VCL entity is identified by its ifIndex, VPI and VCI values in the trap instance OIDs." ::= { zhoneAtmV2Traps 1 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.2 atmDsx3PlcpAlarmStatusChange NOTIFICATION-TYPE OBJECTS { atmInterfaceDs3PlcpAlarmState } STATUS current DESCRIPTION "This trap indicates if there is an alarm present for the DS3 PLCP. " ::= { zhoneAtmV2Traps 2 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.3 atmInterfaceTCAlarmStateChange NOTIFICATION-TYPE OBJECTS { atmInterfaceTCAlarmState } STATUS current DESCRIPTION "This trap indicates that there is an alarm present for the TC Sublayer. " ::= { zhoneAtmV2Traps 3 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.4 atmVclBandwidthUnavailable NOTIFICATION-TYPE OBJECTS { atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex } STATUS current DESCRIPTION "This trap indicates that guranteed bandwidth specified by zhoneAtmTrafficDescrParamExtTrnkVclRate in the traffic descriptor is not available in the system. This is sent when a VCL is activated with the traffic descriptor which specifies higher than available rate or a VCL is activated with the traffic descriptor which specifies the vcl-rate value which can cause available bandwidth to run out. In this trap, shelf/slot is sent as part of the common fields sent in all traps." ::= { zhoneAtmV2Traps 4 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.5 atmVplOperStatusChange NOTIFICATION-TYPE OBJECTS { atmVplAdminStatus, atmVplOperStatus, atmVplLastChange } STATUS current DESCRIPTION "Description." ::= { zhoneAtmV2Traps 5 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.6 atmOamF5PingStatus NOTIFICATION-TYPE OBJECTS { ifIndex, atmVpi, atmVci, zhoneAtmVclExtOamF5PingStatus } STATUS current DESCRIPTION "A notification is sent when the OAM F5 Ping succeeds or fails. The entity is identified by its ifIndex, VPI and VCI values in the trap instance OIDs. A status value of true indicates successful Ping, otherwise unsuccessful Ping." ::= { zhoneAtmV2Traps 6 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.7 atmVpiAutoCreateComplete NOTIFICATION-TYPE OBJECTS { atmVpiAutoCreateDone, atmVpiAutoCreateCount } STATUS current DESCRIPTION "Notification indicating Vpi auto creation is complete." ::= { zhoneAtmV2Traps 7 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.8 atmOamF4PingStatus NOTIFICATION-TYPE OBJECTS { ifIndex, atmVpi, atmVci, zhoneAtmVpiOamF4PingStatus } STATUS current DESCRIPTION "A notification is sent when the OAM F4 Ping succeeds or fails. The entity is identified by its ifIndex, and VPI values in the trap instance OIDs. A status value of true indicates successful Ping, otherwise unsuccessful Ping." ::= { zhoneAtmV2Traps 8 } -- 1.3.6.1.4.1.5504.4.2.2.2.0.9 atmVclExtOamF4PingStatus NOTIFICATION-TYPE OBJECTS { ifIndex, atmVpi, atmVci, zhoneAtmVclExtOamF4PingStatus } STATUS current DESCRIPTION "A notification is sent when the VCL OAM F4 Ping succeeds or fails. The entity is identified by its ifIndex, vpi and vci values in the trap instance OIDs. zhoneAtmVclExtOamF4PingStatus value of true indicates successful Ping, otherwise unsuccessful Ping." ::= { zhoneAtmV2Traps 9 } -- 1.3.6.1.4.1.5504.4.2.2.3 zhoneAtmGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Zhone ATM object groups and notification groups will be defined under this object identity." ::= { zhoneAtmExtension 3 } -- 1.3.6.1.4.1.5504.4.2.2.3.1 zhoneAtmVclExtGroup OBJECT-GROUP OBJECTS { zhoneAtmVclExtFaultDetectionType, zhoneAtmVclExtOamF5Ping, zhoneAtmVclExtOamF5PingStatus, zhoneAtmVclExtTrafficContainerIndex } STATUS current DESCRIPTION "A collection of objects contained in the zhoneAtmVclExtTable." ::= { zhoneAtmGroups 1 } -- 1.3.6.1.4.1.5504.4.2.2.3.2 zhoneAtmTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { atmVclOperStatusChange, atmDsx3PlcpAlarmStatusChange, atmInterfaceTCAlarmStateChange, atmVclBandwidthUnavailable, atmVplOperStatusChange, atmOamF5PingStatus, atmVpiAutoCreateComplete, atmOamF4PingStatus } STATUS current DESCRIPTION "A collection of notification traps under the zhoneAtmV2Traps." ::= { zhoneAtmGroups 2 } -- 1.3.6.1.4.1.5504.4.2.2.3.3 zhoneAtmTrafficDescrParamExtGroup OBJECT-GROUP OBJECTS { zhoneAtmTrafficDescrParamExtTrnkVclRate, zhoneAtmTrafficDescrParamExtCacDivider, zhoneAtmTrafficDescrParamExtUsageParameterControl } STATUS current DESCRIPTION "A collection of objects contained in the zhoneAtmTrafficDescrParamExtTable." ::= { zhoneAtmGroups 3 } -- 1.3.6.1.4.1.5504.4.2.2.3.4 zhoneAtmStatsExtTableGroup OBJECT-GROUP OBJECTS { zhoneAtmStatsTotalInitialCellsRx, zhoneAtmStatsTotalFabricCellsRx, zhoneAtmStatsTotalFinalCLP0CellsRx, zhoneAtmStatsTotalFinalCLP1CellsRx, zhoneAtmStatsTotalFabricCellsTx, zhoneAtmStatsTotalFinalCLP0CellsTx, zhoneAtmStatsTotalFinalCLP1CellsTx, zhoneAtmStatsTotalInitialCellsTx } STATUS current DESCRIPTION "Description." ::= { zhoneAtmGroups 4 } -- 1.3.6.1.4.1.5504.4.2.2.3.5 zhoneAtmVclRateExtParamGroup OBJECT-GROUP OBJECTS { zhoneAtmVclRateExtParam1, zhoneAtmVclRateExtParam2, zhoneAtmVclRateExtParam3, zhoneAtmVclRateExtParam4, zhoneAtmVclRateExtParam5, zhoneAtmVclRateExtParam6, zhoneAtmVclRateExtParam7, zhoneAtmVclRateExtParam8, zhoneAtmVclRateExtParam9, zhoneAtmVclRateExtParam10, zhoneAtmVclRateExtParam11, zhoneAtmVclRateExtParam12, zhoneAtmVclRateExtParam13, zhoneAtmVclRateExtParam14, zhoneAtmVclRateExtParam15, zhoneAtmVclRateExtParam16, zhoneAtmVclRateExtParam1Grp2, zhoneAtmVclRateExtParam2Grp2, zhoneAtmVclRateExtParam3Grp2, zhoneAtmVclRateExtParam4Grp2, zhoneAtmVclRateExtParam5Grp2, zhoneAtmVclRateExtParam6Grp2, zhoneAtmVclRateExtParam7Grp2, zhoneAtmVclRateExtParam8Grp2, zhoneAtmVclRateExtParam9Grp2, zhoneAtmVclRateExtParam10Grp2, zhoneAtmVclRateExtParam11Grp2, zhoneAtmVclRateExtParam12Grp2, zhoneAtmVclRateExtParam13Grp2, zhoneAtmVclRateExtParam14Grp2, zhoneAtmVclRateExtParam15Grp2, zhoneAtmVclRateExtParam16Grp2 } STATUS current DESCRIPTION "Atm Vcl rate parameter values." ::= { zhoneAtmGroups 5 } -- 1.3.6.1.4.1.5504.4.2.2.3.6 zhoneAtmVplExtGroup OBJECT-GROUP OBJECTS { zhoneAtmVplExtFaultDetectionType, zhoneAtmVplExtTrafficContainerIndex } STATUS current DESCRIPTION "Description." ::= { zhoneAtmGroups 6 } -- 1.3.6.1.4.1.5504.4.2.2.3.7 zhoneAtmConnectionStatsGroup OBJECT-GROUP OBJECTS { zhoneAtmConnectionsAvailable, zhoneAtmConnectionsAllocated } STATUS current DESCRIPTION "Description." ::= { zhoneAtmGroups 7 } -- 1.3.6.1.4.1.5504.4.2.2.3.8 zhoneAtmVpiGroup OBJECT-GROUP OBJECTS { zhoneAtmVpiMaxVci, zhoneAtmVpiSwitched, zhoneAtmVpiRowStatus, atmVpi, atmVci, atmVpiAutoCreateDone, atmVpiAutoCreateCount, zhoneAtmVpiOamF4Ping, zhoneAtmVpiOamF4PingStatus, zhoneAtmVpiMaxVciPerVp } STATUS current DESCRIPTION "Description." ::= { zhoneAtmGroups 8 } -- 1.3.6.1.4.1.5504.4.2.2.3.9 zhoneAtmPonGroup OBJECT-GROUP OBJECTS { zhoneAtmVclPonTrafficContainerIndex, zhoneAtmVplPonTrafficContainerIndex } STATUS deprecated DESCRIPTION "Description." ::= { zhoneAtmGroups 9 } -- 1.3.6.1.4.1.5504.4.2.2.3.10 zhoneAtmVclMulticastGroup OBJECT-GROUP OBJECTS { atmVclToMulticastMapIndexNext, atmVclToMulticastMapRoutingDomain, atmVclToMulticastMapMulticastAddress, atmVclToMulticastMapIfIndex, atmVclToMulticastMapVpi, atmVclToMulticastMapVci, atmVclToMulticastMapRowStatus } STATUS current DESCRIPTION "Description." ::= { zhoneAtmGroups 10 } -- 1.3.6.1.4.1.5504.4.2.2.4 zhoneAtmTrafficDescrParamExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmTrafficDescrParamExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone extension table for the atmTrafficDescrParamTable defined in rfc2515." ::= { zhoneAtmExtension 4 } -- 1.3.6.1.4.1.5504.4.2.2.4.1 zhoneAtmTrafficDescrParamExtEntry OBJECT-TYPE SYNTAX ZhoneAtmTrafficDescrParamExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is extension of AtmTrafficDescrParamEntry defined in rfc2515." AUGMENTS { atmTrafficDescrParamEntry } ::= { zhoneAtmTrafficDescrParamExtTable 1 } ZhoneAtmTrafficDescrParamExtEntry ::= SEQUENCE { zhoneAtmTrafficDescrParamExtTrnkVclRate INTEGER, zhoneAtmTrafficDescrParamExtCacDivider Integer32, zhoneAtmTrafficDescrParamExtUsageParameterControl TruthValue } -- -- 1.3.6.1.4.1.5504.4.2.2.4.1.1 zhoneAtmTrafficDescrParamExtTrnkVclRate OBJECT-TYPE SYNTAX INTEGER { unused(1), rate16K(2), rate32K(3), rate64K(4), rate80K(5), rate128K(6), rate160K(7), rate256K(8), rate320K(9), rate512K(10), rate640K(11), rate1552K(12), rate2050K(13), rate12M(14), rate16M(15), rate45M(16), rate155M(17), rate960K(18), rate1280K(19), rate1760K(20), rate3M(21), rate4M(22), rate5M(23), rate6M(24), rate7M(25), rate8M(26), rate10M(27), rate14M(28), rate24M(29), rate32M(30), rate64M(31), rate96M(32), rate128M(33) } MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to describe the minimum guaranteed rate for a VCL which is bound to this traffic descriptor for BAN ATM Trunk Cards. It is applicable only for RTVBR service category. Unlike switched voice calls in the TDM world we cannot oversubscribe bandwidth because all of our voice calls must be connected at all times so that we can receive signaling to tell us that the phone when off hook. Instead of oversubscribing we suggest that the service provide under provision their voice calls. An example of this would be a normal good quality voice call over ATM requires about 80kb of bandwidth. To share the bandwidth resource over several customers the service provider would instead allocate (for example) rate16K for a single voice channel, this would allow 5 channels to share the bandwidth required to connect a good quality voice call. Any value less than rate80K could be used if the service provider wished to share bandwidth resources over more than one voice call. In order for this method to produce a good quality voice call enough bandwidth must be unallocated and used in a shared pool by all connections. When the buffering is not adequate for a good quality call the connection will not terminate, instead the call quality will suffer. Values greater than rate80K would be used by devices like a PBX. For all service categories other than RTVBR, unused is the only valid value.For RTVBR unused is not a valid value and one of the rates has to be specified. This parameter is used independently for transmit and receive traffic based on the traffic descriptor specified for transmit and receive in the VCL. Changing this parameter may cause a trap if newly utilized bandwidth for a card exceeds its available bandwidth. It may happen on multiple cards and therefore there can be multiple traps." DEFVAL { unused } ::= { zhoneAtmTrafficDescrParamExtEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.4.1.2 zhoneAtmTrafficDescrParamExtCacDivider OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows users to oversubsribe. The rate subtracted from CAC is PCR or SCR divided by this object." DEFVAL { '1'b } ::= { zhoneAtmTrafficDescrParamExtEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.4.1.3 zhoneAtmTrafficDescrParamExtUsageParameterControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to 'false', this object disables polcing." DEFVAL { true } ::= { zhoneAtmTrafficDescrParamExtEntry 3 } -- 1.3.6.1.4.1.5504.4.2.2.5 zhoneAtmStatsExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmStatsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These statistics values are coming from fabric interface." ::= { zhoneAtmExtension 5 } -- 1.3.6.1.4.1.5504.4.2.2.5.1 zhoneAtmStatsExtEntry OBJECT-TYPE SYNTAX ZhoneAtmStatsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definitions of Forward and Backward: Internal to ATM Switch Fabric ============================================================= |Ext|==>IngressFwd==>| |==>EgressFwd====>|Int| PortPhy<->|VC | |APC Switch Fabric| |VC |<->Bus/SAR/DSP | |<==EgressBack<==| |<==IngressBack<==| | Phy =============================================================" AUGMENTS { atmVclEntry } ::= { zhoneAtmStatsExtTable 1 } ZhoneAtmStatsExtEntry ::= SEQUENCE { zhoneAtmStatsTotalInitialCellsRx Counter64, zhoneAtmStatsTotalFabricCellsRx Counter64, zhoneAtmStatsTotalFinalCLP0CellsRx Counter64, zhoneAtmStatsTotalFinalCLP1CellsRx Counter64, zhoneAtmStatsTotalInitialCellsTx Counter64, zhoneAtmStatsTotalFabricCellsTx Counter64, zhoneAtmStatsTotalFinalCLP0CellsTx Counter64, zhoneAtmStatsTotalFinalCLP1CellsTx Counter64 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.1 zhoneAtmStatsTotalInitialCellsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Initial Cells Received. Total cells received across the ingress interface for a given VC, and not discarded by policing prior to thresholding (includes CPU insertions but excludes Atm switch fabric generated ingress OAM insertions)." ::= { zhoneAtmStatsExtEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.2 zhoneAtmStatsTotalFabricCellsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Cells Recevied at Fabric.Total cells received across the fabric interface for a given VC, including cells discarded due to parity errors." ::= { zhoneAtmStatsExtEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.3 zhoneAtmStatsTotalFinalCLP0CellsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total CLP0 Cells received by fabric. This field is setup to monitor egress total cells transmitted CLP0." ::= { zhoneAtmStatsExtEntry 3 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.4 zhoneAtmStatsTotalFinalCLP1CellsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total CLP1 Cells received by fabric. This field is setup to monitor egress total cells transmitted CLP1." ::= { zhoneAtmStatsExtEntry 4 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.5 zhoneAtmStatsTotalInitialCellsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Initial Total Cells Transmitted. Total cells transmitted. across the ingress interface for a given VC, and not discarded by policing prior to thresholding (includes CPU insertions but excludes Atm switch fabric generated ingress OAM insertions)." ::= { zhoneAtmStatsExtEntry 5 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.6 zhoneAtmStatsTotalFabricCellsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total cells transmitted at fabric interace.Total cells transmitted across the fabric interface for a given VC, including cells discarded due to parity errors." ::= { zhoneAtmStatsExtEntry 6 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.7 zhoneAtmStatsTotalFinalCLP0CellsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total CLP0 Cells Transmitted. This field is setup to monitor egress total cells transmitted CLP0." ::= { zhoneAtmStatsExtEntry 7 } -- 1.3.6.1.4.1.5504.4.2.2.5.1.8 zhoneAtmStatsTotalFinalCLP1CellsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total CLP1 Cells Transmitted. This field is setup to monitor egress total cells transmitted CLP1." ::= { zhoneAtmStatsExtEntry 8 } -- 1.3.6.1.4.1.5504.4.2.2.6 zhoneAtmVclRateExtParam OBJECT-IDENTITY STATUS current DESCRIPTION "This is the Zhone extension MIB tree to the ATM VCL rates." ::= { zhoneAtmExtension 6 } -- 1.3.6.1.4.1.5504.4.2.2.6.1 zhoneAtmVclRateExtParam1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the first least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards. It is applicable only for RTVBR/NRTVBR or CBR service category. For RTVBR/NRTVBR service category, this value can be set in the rfc2515 td_param2 of the traffice descriptor table. For CBR service category, this value can be set in the td_param1 field. The maximum rates capacitiy is 16, any value which is not matched in any one of those 16 rates will be rejected. Unlike switched voice calls in the TDM world we cannot oversubscribe bandwidth because all of our voice calls must be connected at all times so that we can receive signaling to tell us that the phone when off hook. Instead of oversubscribing we suggest that the service provide under provision their voice calls. An example of this would be a normal good quality voice call over ATM requires about 189 CPS. To share the bandwidth resource over several customers the service provider would instead allocate (for example) 38 CPS for a single voice channel, this would allow 5 channels to share the bandwidth required to connect a good quality voice call. Any value less than 189 CPS could be used if the service provider wished to share bandwidth resources over more than one voice call. In order for this method to produce a good quality voice call enough bandwidth must be unallocated and used in a shared pool by all connections. When the buffering is not adequate for a good quality call the connection will not terminate, instead the call quality will suffer. Values greater than 189 CPS would be used by devices like a PBX. This parameter is used independently for transmit and receive traffic based on the traffic descriptor specified for transmit and receive in the VCL. " DEFVAL { 38 } ::= { zhoneAtmVclRateExtParam 1 } -- 1.3.6.1.4.1.5504.4.2.2.6.2 zhoneAtmVclRateExtParam2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the second least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 76 } ::= { zhoneAtmVclRateExtParam 2 } -- 1.3.6.1.4.1.5504.4.2.2.6.3 zhoneAtmVclRateExtParam3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the third least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 151 } ::= { zhoneAtmVclRateExtParam 3 } -- 1.3.6.1.4.1.5504.4.2.2.6.4 zhoneAtmVclRateExtParam4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fourth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 189 } ::= { zhoneAtmVclRateExtParam 4 } -- 1.3.6.1.4.1.5504.4.2.2.6.5 zhoneAtmVclRateExtParam5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fifth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 302 } ::= { zhoneAtmVclRateExtParam 5 } -- 1.3.6.1.4.1.5504.4.2.2.6.6 zhoneAtmVclRateExtParam6 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the sixth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 378 } ::= { zhoneAtmVclRateExtParam 6 } -- 1.3.6.1.4.1.5504.4.2.2.6.7 zhoneAtmVclRateExtParam7 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the seventh least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 604 } ::= { zhoneAtmVclRateExtParam 7 } -- 1.3.6.1.4.1.5504.4.2.2.6.8 zhoneAtmVclRateExtParam8 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the eighth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 755 } ::= { zhoneAtmVclRateExtParam 8 } -- 1.3.6.1.4.1.5504.4.2.2.6.9 zhoneAtmVclRateExtParam9 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the ninth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 1208 } ::= { zhoneAtmVclRateExtParam 9 } -- 1.3.6.1.4.1.5504.4.2.2.6.10 zhoneAtmVclRateExtParam10 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the tenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 1510 } ::= { zhoneAtmVclRateExtParam 10 } -- 1.3.6.1.4.1.5504.4.2.2.6.11 zhoneAtmVclRateExtParam11 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the eleventh least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 3661 } ::= { zhoneAtmVclRateExtParam 11 } -- 1.3.6.1.4.1.5504.4.2.2.6.12 zhoneAtmVclRateExtParam12 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the twelfth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 4825 } ::= { zhoneAtmVclRateExtParam 12 } -- 1.3.6.1.4.1.5504.4.2.2.6.13 zhoneAtmVclRateExtParam13 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the thirteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 28302 } ::= { zhoneAtmVclRateExtParam 13 } -- 1.3.6.1.4.1.5504.4.2.2.6.14 zhoneAtmVclRateExtParam14 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fouthteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 37736 } ::= { zhoneAtmVclRateExtParam 14 } -- 1.3.6.1.4.1.5504.4.2.2.6.15 zhoneAtmVclRateExtParam15 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fifteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 106133 } ::= { zhoneAtmVclRateExtParam 15 } -- 1.3.6.1.4.1.5504.4.2.2.6.16 zhoneAtmVclRateExtParam16 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the sixteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 365567 } ::= { zhoneAtmVclRateExtParam 16 } -- 1.3.6.1.4.1.5504.4.2.2.6.17 zhoneAtmVclRateExtParam1Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the first least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 2264 } ::= { zhoneAtmVclRateExtParam 17 } -- 1.3.6.1.4.1.5504.4.2.2.6.18 zhoneAtmVclRateExtParam2Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the second least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 3019 } ::= { zhoneAtmVclRateExtParam 18 } -- 1.3.6.1.4.1.5504.4.2.2.6.19 zhoneAtmVclRateExtParam3Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the third least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 4151 } ::= { zhoneAtmVclRateExtParam 19 } -- 1.3.6.1.4.1.5504.4.2.2.6.20 zhoneAtmVclRateExtParam4Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fourth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 7075 } ::= { zhoneAtmVclRateExtParam 20 } -- 1.3.6.1.4.1.5504.4.2.2.6.21 zhoneAtmVclRateExtParam5Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fifth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 9434 } ::= { zhoneAtmVclRateExtParam 21 } -- 1.3.6.1.4.1.5504.4.2.2.6.22 zhoneAtmVclRateExtParam6Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the sixth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 11792 } ::= { zhoneAtmVclRateExtParam 22 } -- 1.3.6.1.4.1.5504.4.2.2.6.23 zhoneAtmVclRateExtParam7Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the seventh least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 14151 } ::= { zhoneAtmVclRateExtParam 23 } -- 1.3.6.1.4.1.5504.4.2.2.6.24 zhoneAtmVclRateExtParam8Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the eighth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 16509 } ::= { zhoneAtmVclRateExtParam 24 } -- 1.3.6.1.4.1.5504.4.2.2.6.25 zhoneAtmVclRateExtParam9Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the ninth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 18868 } ::= { zhoneAtmVclRateExtParam 25 } -- 1.3.6.1.4.1.5504.4.2.2.6.26 zhoneAtmVclRateExtParam10Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the tenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 23585 } ::= { zhoneAtmVclRateExtParam 26 } -- 1.3.6.1.4.1.5504.4.2.2.6.27 zhoneAtmVclRateExtParam11Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the eleventh least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 33019 } ::= { zhoneAtmVclRateExtParam 27 } -- 1.3.6.1.4.1.5504.4.2.2.6.28 zhoneAtmVclRateExtParam12Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the twelfth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 56604 } ::= { zhoneAtmVclRateExtParam 28 } -- 1.3.6.1.4.1.5504.4.2.2.6.29 zhoneAtmVclRateExtParam13Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the thirteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 75472 } ::= { zhoneAtmVclRateExtParam 29 } -- 1.3.6.1.4.1.5504.4.2.2.6.30 zhoneAtmVclRateExtParam14Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fourteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 150943 } ::= { zhoneAtmVclRateExtParam 30 } -- 1.3.6.1.4.1.5504.4.2.2.6.31 zhoneAtmVclRateExtParam15Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the fifthteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 226415 } ::= { zhoneAtmVclRateExtParam 31 } -- 1.3.6.1.4.1.5504.4.2.2.6.32 zhoneAtmVclRateExtParam16Grp2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to describe the sixthteenth least field of total 16 minimum guaranteed rate which is configurable by user for a VCL which is bound to this traffic descriptor for BAN ATM Trunk or MALC uplink Cards." DEFVAL { 301887 } ::= { zhoneAtmVclRateExtParam 32 } -- 1.3.6.1.4.1.5504.4.2.2.7 zhoneAtmVplExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmVplExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone extension table for the atmVplTable defined in rfc2515. " ::= { zhoneAtmExtension 7 } -- 1.3.6.1.4.1.5504.4.2.2.7.1 zhoneAtmVplExtEntry OBJECT-TYPE SYNTAX ZhoneAtmVplExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "NOT CURRENTLY IMPLEMENTED. An entry in the atmVplExtTable. atmVplExtEntry is an augmentation to the atmVplEntry defined in rfc2515." AUGMENTS { atmVplEntry } ::= { zhoneAtmVplExtTable 1 } ZhoneAtmVplExtEntry ::= SEQUENCE { zhoneAtmVplExtFaultDetectionType INTEGER, zhoneAtmVplExtTrafficContainerIndex Integer32 } -- 1.3.6.1.4.1.5504.4.2.2.7.1.1 zhoneAtmVplExtFaultDetectionType OBJECT-TYPE SYNTAX INTEGER { disabled(1), oamF4Loopback(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "NOT CURRENTLY IMPLEMENTED. This is used to configure VPL fault detection. The valid values are: * disabled - Fault detection is disabled. This is the default. * oamF4Loopback - This option uses standard OAM fault management cells as defined in ITU.610 for fault detection. Automatic loopback diagnostic cells are sent to the IAD. When fault detection is enabled, atmVplOperStatusChange notification trap is used to indicate to the NMS station that a VPL has gone down or has come back up. " DEFVAL { disabled } ::= { zhoneAtmVplExtEntry 1 } -- -- 1.3.6.1.4.1.5504.4.2.2.7.1.2 zhoneAtmVplExtTrafficContainerIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Index number of a PON traffic container associated with a VPL definition. NOTE: MULTIPLE VARBINDS ACROSS THE VPL TABLE AND THE VPL EXTENSI0N TABLE ARE NOT ALLOWED! It turns out that anyone trying to set just the traffic container index would inadvertantly try to create a Vpl with default settings. To set the traffic container field, the Vpl must be created first." DEFVAL { 0 } ::= { zhoneAtmVplExtEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.8 zhoneAtmConnectionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmConnectionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table which describes the allocated and available ATM connections on a Zhone device." ::= { zhoneAtmExtension 8 } -- 1.3.6.1.4.1.5504.4.2.2.8.1 zhoneAtmConnectionStatsEntry OBJECT-TYPE SYNTAX ZhoneAtmConnectionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry based on shelf/slot which describes the total allocated and available ATM connections for that shelf/slot." INDEX { zhoneShelfIndex, zhoneSlotIndex } ::= { zhoneAtmConnectionStatsTable 1 } ZhoneAtmConnectionStatsEntry ::= SEQUENCE { zhoneAtmConnectionsAvailable Integer32, zhoneAtmConnectionsAllocated Integer32 } -- -- 1.3.6.1.4.1.5504.4.2.2.8.1.1 zhoneAtmConnectionsAvailable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total available ATM connections for a particular shelf/slot. This number is hardware dependent. Whenever a VPI is allocated for a particular shelf/slot, the number of connections allocated for that VPI is subtracted from the total available and is returned in this value." ::= { zhoneAtmConnectionStatsEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.8.1.2 zhoneAtmConnectionsAllocated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total allocated ATM connections for a particular shelf/slot. For a particular VPI, we calculate the number of connections allocated by the following rule: A VP Switched VPI has a Max VCI of 0 and uses 3 connections. A VC Switched VPI has a Max VCI of n (the number n is a power of 2 and is user selected) and uses n connections. The sum of all allocated connections for all VPIs on the selected shelf/slot is the number returned for this value." ::= { zhoneAtmConnectionStatsEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.9 zhoneAtmVpiTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmVpiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table which describes attributes associated to a particular VPI. Anytime you add to, delete from or modify any entry in this table, you must reboot the card in order for these changes to take effect. The reason for this is that the APC must be re-programmed and the only way to do this is by doing a reboot. In addition, you will not be allowed to modify, create or delete any atm-vcl entry which is on the same card as the VPI until after the card has been rebooted." ::= { zhoneAtmExtension 9 } -- 1.3.6.1.4.1.5504.4.2.2.9.1 zhoneAtmVpiEntry OBJECT-TYPE SYNTAX ZhoneAtmVpiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry based on ifIndex/vpi (which resolves to a particular shelf/slot/port/subport/type/vpi) which contains the maximum VCI value and the switch mode (either vp or vc switched) for a particular VPI." INDEX { ifIndex, atmVplVpi } ::= { zhoneAtmVpiTable 1 } ZhoneAtmVpiEntry ::= SEQUENCE { zhoneAtmVpiMaxVci Integer32, zhoneAtmVpiSwitched INTEGER, zhoneAtmVpiRowStatus ZhoneRowStatus, zhoneAtmVpiOamF4Ping INTEGER, zhoneAtmVpiOamF4PingStatus TruthValue, zhoneAtmVpiMaxVciPerVp Integer32 } -- 1.3.6.1.4.1.5504.4.2.2.9.1.1 zhoneAtmVpiMaxVci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "For the selected VPI, this value contains the maximum VCI. For vp switched VPIs, this value must be zero. For vc switched VPIs, this value must be a power of 2 with its maximum value being hardware dependent." DEFVAL { 0 } ::= { zhoneAtmVpiEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.9.1.2 zhoneAtmVpiSwitched OBJECT-TYPE SYNTAX INTEGER { vp(1), vc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "For the selected VPI, this value can be set to either vp switched or vc switched. If it is vp switched, then the max vci must be zero. If it is vc switched, the max vci value must be a power of 2 with its maximum value being hardware dependent." DEFVAL { vp } ::= { zhoneAtmVpiEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.9.1.3 zhoneAtmVpiRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status only supports create-and-go and destroy actions. Returns active if row is in service." ::= { zhoneAtmVpiEntry 3 } -- 1.3.6.1.4.1.5504.4.2.2.9.1.4 zhoneAtmVpiOamF4Ping OBJECT-TYPE SYNTAX INTEGER { disabled(1), endToEnd(2), segment(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to send a OAM F4 loopback cell for fault detection. The value will automatically revert to disabled after the set is complete. The valid values are: * disabled - OAM F4 loopback cell is not being sent. This is the default. * endToEnd - This option uses standard OAM fault management cells as defined in ITU.610 for fault detection. Setting this will send a OAM F4 end-to-end loopback cell to be sent * segment - This is not supported at this time " DEFVAL { disabled } ::= { zhoneAtmVpiEntry 4 } -- 1.3.6.1.4.1.5504.4.2.2.9.1.5 zhoneAtmVpiOamF4PingStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "TRUE if ping was successfull and FALSE if failed." ::= { zhoneAtmVpiEntry 5 } -- 1.3.6.1.4.1.5504.4.2.2.9.1.6 zhoneAtmVpiMaxVciPerVp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If vp-switched, but VG connection is vc-switched, this specifies max number of vci on gateway." ::= { zhoneAtmVpiEntry 6 } -- 1.3.6.1.4.1.5504.4.2.2.10 atmVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VPI used for traps defined under atm traps" ::= { zhoneAtmExtension 10 } -- 1.3.6.1.4.1.5504.4.2.2.11 atmVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VCI used for traps defined under atm traps" ::= { zhoneAtmExtension 11 } -- 1.3.6.1.4.1.5504.4.2.2.12 atmVpiAutoCreateDone OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates automatic Vpi generation complete." ::= { zhoneAtmExtension 12 } -- 1.3.6.1.4.1.5504.4.2.2.13 atmVpiAutoCreateCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This value is the count of the number of auto-created Vpis." ::= { zhoneAtmExtension 13 } -- 1.3.6.1.4.1.5504.4.2.2.16 atmVclToMulticastMap OBJECT IDENTIFIER ::= { zhoneAtmExtension 16 } -- 1.3.6.1.4.1.5504.4.2.2.16.1 atmVclToMulticastMapIndexNext OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for atmMulticastAddressVclMapIndex when creating entries in the atmMulticastAddressVclMapTable. The value 0 indicates that no unassigned entries are available. To obtain the atmMulticastAddressVclMapIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { atmVclToMulticastMap 1 } -- 1.3.6.1.4.1.5504.4.2.2.16.2 atmVclToMulticastMapTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVclToMulticastMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Multicast Address to Vcl Mapping table. Each entry in this table associates a multicast address representing a video stream with a Vcl. All of the entries in this table are assumed to be unique, not only in terms of index, but in terms of (index, multicast address) <-> (ifIndex, vpi, vci). Note that the Vcl type for this table should always be 'other', denoting cell relay pass-through. We are not terminating the IP stream on the MALC. Also note that the Vcls that this table refer to are the ones originating at the Video Head-End, coming into the MALC Uplink card." ::= { atmVclToMulticastMap 2 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1 atmVclToMulticastMapEntry OBJECT-TYPE SYNTAX AtmVclToMulticastMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Multicast Address to Vcl Mapping table. This entry is used to associate a multicast address with a Vcl. Step-wise Procedures to set up a Multicast Vcl Mapping profile Once the Vcl that carries the video stream is created, the following steps are taken to provision a Multicast Address to Vcl Mapping: (1) The manager obtains a unique atmMulticastAddressVclMapIndex by reading the atmMulticastAddressVclMapIndexNext object. (2) Next, the manager creates a row in the atmMulticastAddressVclMapTable by setting atmMulticastAddressVclMapRowStatus to createAndGo. The agent checks the sanity of the Vcl, domain index, and multicast address. The row creation fails if: - the specified Vcl does not exist, - the specified Vcl is not of the correct type for multicasting, - the routing domain index is outside of the supported range, - the multicast address is not of the correct format. (3) The manager promotes the row in the atmMulticastAddressVclMapTable when the 'set' completes." INDEX { atmVclToMulticastMapIndex } ::= { atmVclToMulticastMapTable 1 } AtmVclToMulticastMapEntry ::= SEQUENCE { atmVclToMulticastMapIndex INTEGER, atmVclToMulticastMapRoutingDomain INTEGER, atmVclToMulticastMapMulticastAddress IpAddress, atmVclToMulticastMapIfIndex InterfaceIndex, atmVclToMulticastMapVpi AtmVpIdentifier, atmVclToMulticastMapVci AtmVcIdentifier, atmVclToMulticastMapRowStatus ZhoneRowStatus } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.1 atmVclToMulticastMapIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value to identify this Multicast Address to Vcl mapping." ::= { atmVclToMulticastMapEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.2 atmVclToMulticastMapRoutingDomain OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Routing domain of the Head-End video server." ::= { atmVclToMulticastMapEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.3 atmVclToMulticastMapMulticastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Multicast IP address contained in the MPEG2 video stream." ::= { atmVclToMulticastMapEntry 3 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.4 atmVclToMulticastMapIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value of the ATM interface for the Vcl carrying a video stream." ::= { atmVclToMulticastMapEntry 4 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.5 atmVclToMulticastMapVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The VPI value of the ATM interface for the Vcl carrying a video stream." ::= { atmVclToMulticastMapEntry 5 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.6 atmVclToMulticastMapVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The VCI value of the ATM interface for the Vcl carrying a video stream." ::= { atmVclToMulticastMapEntry 6 } -- 1.3.6.1.4.1.5504.4.2.2.16.2.1.7 atmVclToMulticastMapRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the multicast address to Vcl table entry. This object must be initially set to 'createAndGo'." ::= { atmVclToMulticastMapEntry 7 } -- 1.3.6.1.4.1.5504.4.2.2.17 zhoneAtmPonExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmPonExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This is the Zhone extension to the Atm Vcl Table (rfc2515.) It contains APON-related objects." ::= { zhoneAtmExtension 17 } -- 1.3.6.1.4.1.5504.4.2.2.17.1 zhoneAtmPonExtEntry OBJECT-TYPE SYNTAX ZhoneAtmPonExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This is an entry in the Atm PON Extension table." AUGMENTS { atmVclEntry } ::= { zhoneAtmPonExtTable 1 } ZhoneAtmPonExtEntry ::= SEQUENCE { zhoneAtmVclPonTrafficContainerIndex Integer32 } -- 1.3.6.1.4.1.5504.4.2.2.17.1.1 zhoneAtmVclPonTrafficContainerIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This field is an index into the ATM PON Traffic Container table. It associated a Vcl with a Traffic Container, and is used to retrieve PON channel provisioning information." DEFVAL { 0 } ::= { zhoneAtmPonExtEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.18 zhoneAtmVplPonExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmVplPonExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This is the Zhone extension to the Atm Vpl Table (rfc2515.) It contains APON-related objects." ::= { zhoneAtmExtension 18 } -- 1.3.6.1.4.1.5504.4.2.2.18.1 zhoneAtmVplPonExtEntry OBJECT-TYPE SYNTAX ZhoneAtmVplPonExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This is an entry in the Atm PON Extension table." AUGMENTS { atmVplEntry } ::= { zhoneAtmVplPonExtTable 1 } ZhoneAtmVplPonExtEntry ::= SEQUENCE { zhoneAtmVplPonTrafficContainerIndex Integer32 } -- 1.3.6.1.4.1.5504.4.2.2.18.1.1 zhoneAtmVplPonTrafficContainerIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This field is an index into the ATM PON Traffic Container table. It associated a Vpl with a Traffic Container, and is used to retrieve PON channel provisioning information." DEFVAL { 0 } ::= { zhoneAtmVplPonExtEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.19 zhoneAtmInterfaceTcExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmInterfaceTcExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM interface TC Sublayer parameters and state variables, one entry per ATM interface port." ::= { zhoneAtmExtension 19 } -- 1.3.6.1.4.1.5504.4.2.2.19.1 zhoneAtmInterfaceTcExtEntry OBJECT-TYPE SYNTAX ZhoneAtmInterfaceTcExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains TC Sublayer parameters and state variables at the ATM interface and is indexed by the ifIndex value of the ATM interface." AUGMENTS { atmInterfaceTCEntry } ::= { zhoneAtmInterfaceTcExtTable 1 } ZhoneAtmInterfaceTcExtEntry ::= SEQUENCE { zhoneAtmInterfaceNCDEvents Counter32, zhoneAtmInterfaceHECEvents Counter32, zhoneAtmInterfaceFeOCDEvents Counter32, zhoneAtmInterfaceFeNCDEvents Counter32, zhoneAtmInterfaceFeHECEvents Counter32 } -- -- 1.3.6.1.4.1.5504.4.2.2.19.1.1 zhoneAtmInterfaceNCDEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the Near-end No Cell Delineation (NCD) events occur. " ::= { zhoneAtmInterfaceTcExtEntry 1 } -- 1.3.6.1.4.1.5504.4.2.2.19.1.2 zhoneAtmInterfaceHECEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Near-end Header Error Control (HEC) violations occur. " ::= { zhoneAtmInterfaceTcExtEntry 2 } -- 1.3.6.1.4.1.5504.4.2.2.19.1.3 zhoneAtmInterfaceFeOCDEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Far-end Out of Cell Delineation (OCD) events occur. " ::= { zhoneAtmInterfaceTcExtEntry 3 } -- 1.3.6.1.4.1.5504.4.2.2.19.1.4 zhoneAtmInterfaceFeNCDEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Far-end No Cell Delineation (NCD) events occur. " ::= { zhoneAtmInterfaceTcExtEntry 4 } -- 1.3.6.1.4.1.5504.4.2.2.19.1.5 zhoneAtmInterfaceFeHECEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Far-end Header Error Control (HEC) violations occur. " ::= { zhoneAtmInterfaceTcExtEntry 5 } -- 1.3.6.1.4.1.5504.4.2.2.20 zhoneAtmVcCrossConnectExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAtmVcCrossConnectExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table contains Atm Vc Cross Connect Extensions to the atmVcCrossConnectEntry." ::= { zhoneAtmExtension 20 } -- 1.3.6.1.4.1.5504.4.2.2.20.1 zhoneAtmVcCrossConnectExtEntry OBJECT-TYPE SYNTAX ZhoneAtmVcCrossConnectExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains Atm Vc Cross Connect Extensions to the atmVcCrossConnectEntry." AUGMENTS { atmVcCrossConnectEntry } ::= { zhoneAtmVcCrossConnectExtTable 1 } ZhoneAtmVcCrossConnectExtEntry ::= SEQUENCE { zhoneAtmVcCrossConnectExtHandleId OCTET STRING } -- 1.3.6.1.4.1.5504.4.2.2.20.1.1 zhoneAtmVcCrossConnectExtHandleId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively-assigned name for the Atm Vc Cross Connect indicated by the INDEX value." ::= { zhoneAtmVcCrossConnectExtEntry 1 } END -- -- comAtm.mib --