--MibName=rcRouteManage -- ***************************************************************** -- RAISECOM-ROUTEMANAGE-MIB.MIB: Raisecom RouteManage MIB file -- Feb 2011, Yuyonghong -- -- Copyright (c) 2011 by Raisecom, Inc. -- All rights reserved. -- -- ***************************************************************** RAISECOM-ROUTEMANAGE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Unsigned32, Integer32 FROM SNMPv2-SMI InetAddress FROM INET-ADDRESS-MIB InterfaceIndexOrZero FROM IF-MIB RowStatus, TruthValue, MacAddress,RowPointer FROM SNMPv2-TC PortList FROM SWITCH-TC Vlanset FROM SWITCH-TC raisecomAgent FROM RAISECOM-BASE-MIB; raisecomRouteManage MODULE-IDENTITY LAST-UPDATED "0412200000Z" -- Dec 20, 2004 ORGANIZATION "Wind River Systems, Inc." CONTACT-INFO "Wind River Systems, Inc. E-mail: support@windriver.com" DESCRIPTION "description of raisecomRouteManage object." REVISION "0412200000Z" -- Dec 20, 2004 DESCRIPTION "Initial MIB creation." ::= {raisecomAgent 30} -------------------------------------------------------------------------------------- -- groups in the ROSE Layer 3 MIB -------------------------------------------------------------------------------------- raisecomRouteManageNotifications OBJECT IDENTIFIER ::={ raisecomRouteManage 1 } raisecomRouteManageObjects OBJECT IDENTIFIER ::={ raisecomRouteManage 2 } raisecomRouteManageConformance OBJECT IDENTIFIER ::={ raisecomRouteManage 3 } --------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------- -- groups in the ROSE Layer 3 MIB -------------------------------------------------------------------------------------- raisecomRouteManageScalarGroup OBJECT IDENTIFIER ::={ raisecomRouteManageObjects 1 } raisecomIpv4RouteManagScalarGroup OBJECT IDENTIFIER ::={ raisecomRouteManageObjects 2 } raisecomRouteManageTableGroup OBJECT IDENTIFIER ::={ raisecomRouteManageObjects 4 } --------------------------------------------------------------------------------------- -- ------------------------------------------------------------- -- scalar in the MIB -- ------------------------------------------------------------- --raisecomRouteManageScalarGroup raisecomIpRMRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Uniquely identifies the router." DEFVAL { 0 } ::= { raisecomRouteManageScalarGroup 1 } --raisecomIpv4RouteManagScalarGroup raisecomIpv4RMDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This address is used only when ip routing is not-forwarding." ::= { raisecomIpv4RouteManagScalarGroup 1 } raisecomIpv4RMMaxHwHostNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number, if any, of hosts that the hardware can support in its routing table." ::= { raisecomIpv4RouteManagScalarGroup 2 } raisecomIpv4RMCurrentHwHostNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of hosts the hardware supports." ::= { raisecomIpv4RouteManagScalarGroup 3 } raisecomIpv4RMMaxHwSubnetNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number, if any, of subnets that the hardware can support in its routing table." ::= { raisecomIpv4RouteManagScalarGroup 4 } raisecomIpv4RMCurrentHwSubnetNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of subnets that the hardware supports." ::= { raisecomIpv4RouteManagScalarGroup 5 } raisecomIpv4RMMaxRouteNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the raisecomIpv4RouteManageRouteTable." ::= { raisecomIpv4RouteManagScalarGroup 6 } raisecomIpv4RMCurrentRouteNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of rows in the raisecomIpv4RouteManageRouteTable" ::= { raisecomIpv4RouteManagScalarGroup 7 } raisecomIpv4RMMaxEcmpGroupNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment-related; It represents the total numbers of ipv4 equivalent routes the device supports." ::= { raisecomIpv4RouteManagScalarGroup 8 } raisecomIpv4RMCurrentEcmpGroupNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Equipment-related; It represents the current numbers of ipv4 equivalent routes the device supports." ::= { raisecomIpv4RouteManagScalarGroup 9 } raisecomIpv4RMEcmpNextHopNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment-related;It represents the nexthop numbers to the same destination." ::= { raisecomIpv4RouteManagScalarGroup 10 } ------------------------------------------------------------------ --table in the mib ------------------------------------------------------------------ --raisecomIpv4RouteManageRouteTable raisecomIpv4RouteManageRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF raisecomIpv4RouteManageRouteEntry ACCESS not-accessible STATUS current DESCRIPTION "ipv4 route manage route information" ::= { raisecomRouteManageTableGroup 1 } raisecomIpv4RouteManageRouteEntry OBJECT-TYPE SYNTAX raisecomIpv4RouteManageRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in raisecomIpv4RouteManageRouteTable." INDEX { raisecomIpv4RMRouteDest, raisecomIpv4RMRouteMask, raisecomIpv4RMRouteIndex} ::= { raisecomIpv4RouteManageRouteTable 1 } raisecomIpv4RouteManageRouteEntry ::= SEQUENCE { raisecomIpv4RMRouteDest IpAddress, raisecomIpv4RMRouteMask IpAddress, raisecomIpv4RMRouteIndex Unsigned32, raisecomIpv4RMRouteNextHop IpAddress, raisecomIpv4RMRouteLearnFrom IpAddress, raisecomIpv4RMRouteIfIndex Integer32, raisecomIpv4RMRouteTag Integer32, raisecomIpv4RMRouteType INTEGER, raisecomIpv4RMRouteProto INTEGER, raisecomIpv4RMRouteAge Unsigned32, raisecomIpv4RMRouteDistance Unsigned32, raisecomIpv4RMRouteValid TruthValue, raisecomIpv4RMRouteInfo RowPointer, raisecomIpv4RMRouteMetric1 Integer32, raisecomIpv4RMRouteMetric2 Integer32, raisecomIpv4RMRouteMetric3 Integer32, raisecomIpv4RMRouteMetric4 Integer32, raisecomIpv4RMRouteMetric5 Integer32 } raisecomIpv4RMRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { raisecomIpv4RouteManageRouteEntry 1 } raisecomIpv4RMRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the raisecomRouteDest field. If the value of the raisecomRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0 ." ::= { raisecomIpv4RouteManageRouteEntry 2 } raisecomIpv4RMRouteIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value which uniquely identifies the route among the routes to the same network layer destination." ::= { raisecomIpv4RouteManageRouteEntry 3 } raisecomIpv4RMRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the next hop of this route." ::= { raisecomIpv4RouteManageRouteEntry 4 } raisecomIpv4RMRouteLearnFrom OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Where the route learned from." ::= { raisecomIpv4RouteManageRouteEntry 5 } raisecomIpv4RMRouteIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { raisecomIpv4RouteManageRouteEntry 6 } raisecomIpv4RMRouteTag OBJECT-TYPE SYNTAX Integer32(0.. 2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to tag external routes." ::= { raisecomIpv4RouteManageRouteEntry 7 } raisecomIpv4RMRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), direct(3), indirect(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route." ::= { raisecomIpv4RouteManageRouteEntry 8 } raisecomIpv4RMRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned." ::= { raisecomIpv4RouteManageRouteEntry 9 } raisecomIpv4RMRouteAge OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct.Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { raisecomIpv4RouteManageRouteEntry 10 } raisecomIpv4RMRouteDistance OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Administrative distance is the credibility of a routing protocol." ::= { raisecomIpv4RouteManageRouteEntry 11 } raisecomIpv4RMRouteValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Setting this object to the value 'false(2)' has the effect of invalidating the corresponding entry in the ipv4 RouteTable object. That is, it effectively disassociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use.Proper interpretation of such entries requires examination of the relevant ipv6RouteValid object." ::= { raisecomIpv4RouteManageRouteEntry 12 } raisecomIpv4RMRouteInfo OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipv6RouteProto value.If this information is not present, its value should be set to the OBJECT ID { 0 0 },which is a syntactically valid object identifier,and any implementation conforming to ASN.1and the Basic Encoding Rules must be able to generate and recognize this value." ::= { raisecomIpv4RouteManageRouteEntry 13 } raisecomIpv4RMRouteMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's raisecomRouteProto value. If this metric is not used, its value should be set to -1." ::= { raisecomIpv4RouteManageRouteEntry 14 } raisecomIpv4RMRouteMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's raisecomIpv4RMRouteProto value. If this metric is not used,its value should be set to -1." ::= { raisecomIpv4RouteManageRouteEntry 15 } raisecomIpv4RMRouteMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's raisecomIpv4RMRouteProto value. If this metric is not used,its value should be set to -1." ::= { raisecomIpv4RouteManageRouteEntry 16 } raisecomIpv4RMRouteMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's raisecomIpv4RMRouteProto value. If this metric is not used,its value should be set to -1." ::= { raisecomIpv4RouteManageRouteEntry 17 } raisecomIpv4RMRouteMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's raisecomIpv4RMRouteProto value. If this metric is not used,its value should be set to -1." ::= { raisecomIpv4RouteManageRouteEntry 18 } --raisecomIpv4RouteManageProtocolStatisticsTable raisecomIpv4RouteManageProtocolStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF raisecomIpv4RouteManageProtocolStatisticsEntry ACCESS not-accessible STATUS current DESCRIPTION "ipv4 route manage statistics information" ::= { raisecomRouteManageTableGroup 2 } raisecomIpv4RouteManageProtocolStatisticsEntry OBJECT-TYPE SYNTAX raisecomIpv4RouteManageProtocolStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in raisecomIpv4RouteManageProtocolStatisticsTable." INDEX { raisecomIpv4RMRProtocolIndex} ::= { raisecomIpv4RouteManageProtocolStatisticsTable 1 } raisecomIpv4RouteManageProtocolStatisticsEntry ::= SEQUENCE { raisecomIpv4RMRProtocolIndex INTEGER, raisecomIpv4RMRProtocolActiveRouteNum INTEGER, raisecomIpv4RMRProtocolInactiveRouteNum INTEGER } raisecomIpv4RMRProtocolIndex OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the table." ::= { raisecomIpv4RouteManageProtocolStatisticsEntry 1 } raisecomIpv4RMRProtocolActiveRouteNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the active routes." ::= { raisecomIpv4RouteManageProtocolStatisticsEntry 2 } raisecomIpv4RMRProtocolInactiveRouteNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the inactive routes." ::= { raisecomIpv4RouteManageProtocolStatisticsEntry 3 } -- -- END of SRoute-MIB -- END