-- ***************************************************************** -- QTECH-ACL-CONTEXT-MIB.mib: Qtech Acl MIB file for multiple context -- -- -- December 2009, rendh -- -- Copyright (c) 2009 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-ACL-CONTEXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI TruthValue, DisplayString, RowStatus, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF IfIndex, ConfigStatus FROM QTECH-TC qtechMgmt FROM QTECH-SMI; qtechAclVCMIB MODULE-IDENTITY LAST-UPDATED "200912060000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech acl mibs for multiple context." REVISION "200912060000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 66} --ACLNO ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- " Serial number of Access control list entry, Access control list entry of -- bigger ACL number will have higher implement priority. One ACL number -- corresponding to only one entry." -- SYNTAX INTEGER -- Access control list qtechAclVCMIBObjects OBJECT IDENTIFIER ::= { qtechAclVCMIB 1 } qtechAclVCTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechAclVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of acl request entries." ::= { qtechAclVCMIBObjects 1 } qtechAclVCEntry OBJECT-TYPE SYNTAX QtechAclVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains acl name and mode." INDEX { qtechAclContextNameVC, qtechAclNameVC } ::= { qtechAclVCTable 1 } QtechAclVCEntry ::= SEQUENCE { qtechAclContextNameVC DisplayString, qtechAclNameVC DisplayString, qtechAclModeVC INTEGER, qtechAclEntryStatusVC ConfigStatus } qtechAclContextNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "context name of this entry." ::= { qtechAclVCEntry 1 } qtechAclNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Access list name of this entry.This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { qtechAclVCEntry 2 } qtechAclModeVC OBJECT-TYPE SYNTAX INTEGER{ acl-ip-standard(1), acl-ip-extended(2), acl-mac-extended(3), acl-expert(4), acl-ipv6-extended(5) } MAX-ACCESS read-create STATUS current DESCRIPTION " Config mode of this ACL" ::= { qtechAclVCEntry 3 } qtechAclEntryStatusVC OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this entry, set its value to invalid will delete this entry. set its value to valid has no effect." ::= { qtechAclVCEntry 4 } -- if table ****************************************** qtechAclIfVCTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechAclIfVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of ACL interface objects." ::= { qtechAclVCMIBObjects 2 } qtechAclIfVCEntry OBJECT-TYPE SYNTAX QtechAclIfVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry ACL interface information." INDEX { qtechAclIfContextNameVC, qtechAclIfIndexVC } ::= { qtechAclIfVCTable 1 } QtechAclIfVCEntry ::= SEQUENCE { qtechAclIfContextNameVC DisplayString, qtechAclIfIndexVC IfIndex, qtechAclIfMaxEntryNumVC Integer32, qtechAclIfCurruntEntryNumVC Integer32, qtechIfInAclNameVC DisplayString, qtechIfOutAclNameVC DisplayString } qtechAclIfContextNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "context name of this entry." ::= { qtechAclIfVCEntry 1 } qtechAclIfIndexVC OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { qtechAclIfVCEntry 2 } qtechAclIfMaxEntryNumVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max num of ACL entry(ACE) in a interface." ::= { qtechAclIfVCEntry 3 } qtechAclIfCurruntEntryNumVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Currunt valid num of ACL entry(ACE) in a interface." ::= { qtechAclIfVCEntry 4 } qtechIfInAclNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Access list name of ACL of this interface match for input. It indicate that this interface doesn't match any ACL for input if this string is null" ::= { qtechAclIfVCEntry 5 } qtechIfOutAclNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Access list name of ACL of this interface match for output. It indicate that this interface doesn't match any ACL for output if this string is null This relation function apply only L3 interface." ::= { qtechAclIfVCEntry 6 } -- AceExt************************************************ qtechAceExtVCTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechAceExtVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ACE request entries." ::= { qtechAclVCMIBObjects 3 } qtechAceExtVCEntry OBJECT-TYPE SYNTAX QtechAceExtVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains ace parameters and results. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to a ace entry of a acl. The station should then create the associated entry. We must set all specifies valid values for the non-defaulted configuration objects, certainly, it should also modify the default values for the other configuration objects if the defaults are not appropriate. Once the appropriate instance of all the configuration objects have been created or set,the row status should be set to active to initiate the request." INDEX { qtechAceExtContextNameVC, qtechAceExtAclNameVC,qtechAceExtIndexVC } ::= { qtechAceExtVCTable 1 } QtechAceExtVCEntry ::= SEQUENCE { qtechAceExtContextNameVC DisplayString, qtechAceExtAclNameVC DisplayString, qtechAceExtIndexVC Integer32, qtechAceExtIfAnyVIDVC TruthValue, qtechAceExtVIDVC Unsigned32, qtechAceExtIfAnySourceIpVC TruthValue, qtechAceExtSourceIpVC IpAddress, qtechAceExtIfAnySourceWildCardVC TruthValue, qtechAceExtSourceWildCardVC IpAddress, qtechAceExtIfAnySourceMacAddrVC TruthValue, qtechAceExtSourceMacAddrVC MacAddress, qtechAceExtIfAnyDestIpVC TruthValue, qtechAceExtDestIpVC IpAddress, qtechAceExtIfAnyDestWildCardVC TruthValue, qtechAceExtDestIpWildCardVC IpAddress, qtechAceExtIfAnyDestMacAddrVC TruthValue, qtechAceExtDestMacAddrVC MacAddress, qtechAceExtIfAnyEtherLikeTypeVC TruthValue, qtechAceExtEtherLikeTypeVC Integer32, qtechAceExtIfAnyIpProtocolFieldVC TruthValue, qtechAceExtIpProtocolFieldVC Integer32, qtechAceExtSourceProtocolPortVC Integer32, qtechAceExtDestProtocolPortVC Integer32, qtechAceExtIfAnyProtocolTypeVC TruthValue, qtechAceExtProtocolTypeVC Integer32, qtechAceExtFlowActionVC INTEGER, qtechAceExtEntryStautsVC RowStatus, qtechAceExtTimeRangeNameVC DisplayString, qtechAceExtSourcePortOpVC INTEGER, qtechAceExtSourceProtocolPortRangeVC Integer32, qtechAceExtDestPortOpVC INTEGER, qtechAceExtDestProtocolPortRangeVC Integer32, qtechAceExtIfAnyCosVC TruthValue, qtechAceExtCosVC Integer32, qtechAceExtIfAnyIpPrecVC TruthValue, qtechAceExtIpPrecVC Integer32, qtechAceExtIfAnyDscpVC TruthValue, qtechAceExtDscpVC Integer32, qtechAceExtIfAnySourceMacAddrWildCardVC TruthValue, qtechAceExtSourceMacAddrWildCardVC MacAddress, qtechAceExtIfAnyDestMacAddrWildCardVC TruthValue, qtechAceExtDestMacAddrWildCardVC MacAddress, qtechAceExtIfAnyTcpFlagVC TruthValue, qtechAceExtTcpFlagVC Integer32, qtechAceExtIfAnySourceIp6VC TruthValue, qtechAceExtSourceIp6VC OCTET STRING, qtechAceExtIfAnySourceIp6WildCardVC TruthValue, qtechAceExtSourceIp6WildCardVC OCTET STRING, qtechAceExtIfAnyDestIp6VC TruthValue, qtechAceExtDestIp6VC OCTET STRING, qtechAceExtIfAnyDestIp6WildCardVC TruthValue, qtechAceExtDestIp6WildCardVC OCTET STRING } qtechAceExtContextNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "context name of this entry." ::= { qtechAceExtVCEntry 1 } qtechAceExtAclNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Access list name of this ace belong to. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { qtechAceExtVCEntry 2 } qtechAceExtIndexVC OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Object which specifies a unique entry in the qtechAclTable. A management station wishing to initiate a acl operation should use a pseudo-random value for this object when creating or modifying an instance of a qtechAclEntry. The RowStatus semantics of the qtechAclEntryStatus object will prevent access conflicts." ::= { qtechAceExtVCEntry 3 } qtechAceExtIfAnyVIDVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "VID of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 4 } qtechAceExtVIDVC OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "VID of Ace flow definition." ::= { qtechAceExtVCEntry 5 } qtechAceExtIfAnySourceIpVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ip of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 6 } qtechAceExtSourceIpVC OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Sourece ip address of Ace flow definition." ::= { qtechAceExtVCEntry 7 } qtechAceExtIfAnySourceWildCardVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ip wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 8 } qtechAceExtSourceWildCardVC OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Sourece ip wild card(in reverse ip address mask)of Ace flow definition." ::= { qtechAceExtVCEntry 9 } qtechAceExtIfAnySourceMacAddrVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source mac address of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 10 } qtechAceExtSourceMacAddrVC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Sourece Mac address of Ace flow definition." ::= { qtechAceExtVCEntry 11 } qtechAceExtIfAnyDestIpVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Destination Ip wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 12 } qtechAceExtDestIpVC OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination ip address of Ace flow definition." ::= { qtechAceExtVCEntry 13 } qtechAceExtIfAnyDestWildCardVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ip wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 14 } qtechAceExtDestIpWildCardVC OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination ip wild card(in reverse ip address mask) of Ace flow definition." ::= { qtechAceExtVCEntry 15 } qtechAceExtIfAnyDestMacAddrVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ip wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 16 } qtechAceExtDestMacAddrVC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination Mac address of Ace flow definition." ::= { qtechAceExtVCEntry 17 } qtechAceExtIfAnyEtherLikeTypeVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Ether Like Type in MAC packet will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 18 } qtechAceExtEtherLikeTypeVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Ether Like Type in MAC packet of Ace flow definition. " ::= { qtechAceExtVCEntry 19 } qtechAceExtIfAnyIpProtocolFieldVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ip wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 20 } qtechAceExtIpProtocolFieldVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of protocol field in IP packet of Ace flow definition." ::= { qtechAceExtVCEntry 21 } qtechAceExtSourceProtocolPortVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of source protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field." ::= { qtechAceExtVCEntry 22 } qtechAceExtDestProtocolPortVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of destination protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field(tcp,udp)." ::= { qtechAceExtVCEntry 23 } qtechAceExtIfAnyProtocolTypeVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of protocol type field in IP packet will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 24 } qtechAceExtProtocolTypeVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of protocol type field in IP packet of Ace flow definition. It is significative only to those protocol which support this field(icmp,igmp)." ::= { qtechAceExtVCEntry 25 } qtechAceExtFlowActionVC OBJECT-TYPE SYNTAX INTEGER{ permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Permit indicate that the kind of flow which entry define will be allow to access , deny indicate that the kind of flow which entry define will be refuse to access" ::= { qtechAceExtVCEntry 26 } qtechAceExtEntryStautsVC OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "entry status for this list." ::= { qtechAceExtVCEntry 27 } qtechAceExtTimeRangeNameVC OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of time-range of this ACE match. It indicate that this ACE doesn't match any time-range if this string is null" ::= { qtechAceExtVCEntry 28 } qtechAceExtSourcePortOpVC OBJECT-TYPE SYNTAX INTEGER { noOperator(1), lt(2), gt(3), eq(4), neq(5), range(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "noOperator(1), which is the default value, means that no comparison is to be made with the Source TCP/UDP port number. lt(2) means less than. gt(3) means greater than. eq(4) means equal. neq(5) means not equal." ::= { qtechAceExtVCEntry 29 } qtechAceExtSourceProtocolPortRangeVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ending value of source protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field. The qtechAceExtSourcePortOp must set to range(6)." ::= { qtechAceExtVCEntry 30 } qtechAceExtDestPortOpVC OBJECT-TYPE SYNTAX INTEGER { noOperator(1), lt(2), gt(3), eq(4), neq(5), range(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "noOperator(1), which is the default value, means that no comparison is to be made with the Dest TCP/UDP port number. lt(2) means less than. gt(3) means greater than. eq(4) means equal. neq(5) means not equal." ::= { qtechAceExtVCEntry 31 } qtechAceExtDestProtocolPortRangeVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ending value of dest protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field. The qtechAceExtSourcePortOp must set to range(6)." ::= { qtechAceExtVCEntry 32 } qtechAceExtIfAnyCosVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Cos will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 33 } qtechAceExtCosVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Cos of Ace flow definition." ::= { qtechAceExtVCEntry 34 } qtechAceExtIfAnyIpPrecVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Ip precedence will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 35 } qtechAceExtIpPrecVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Ip precedence of Ace flow definition." ::= { qtechAceExtVCEntry 36 } qtechAceExtIfAnyDscpVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Dscp will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 37 } qtechAceExtDscpVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Dscp of Ace flow definition." ::= { qtechAceExtVCEntry 38 } qtechAceExtIfAnyTcpFlagVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Tcp flag will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 39 } qtechAceExtTcpFlagVC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Tcp flag of Ace flow definition." ::= { qtechAceExtVCEntry 40 } qtechAceExtIfAnySourceMacAddrWildCardVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source mac address wildcard of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 41 } qtechAceExtSourceMacAddrWildCardVC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Sourece Mac address wildcard of Ace flow definition." ::= { qtechAceExtVCEntry 42 } qtechAceExtIfAnyDestMacAddrWildCardVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Dest mac address wildcard of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 43 } qtechAceExtDestMacAddrWildCardVC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Dest Mac address wildcard of Ace flow definition." ::= { qtechAceExtVCEntry 44 } qtechAceExtIfAnySourceIp6VC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ipv6 address of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 45 } qtechAceExtSourceIp6VC OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Sourece ipv6 address of Ace flow definition." ::= { qtechAceExtVCEntry 46 } qtechAceExtIfAnySourceIp6WildCardVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Source Ipv6 address wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 47 } qtechAceExtSourceIp6WildCardVC OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Sourece ipv6 address wild card(in reverse ip address mask)of Ace flow definition." ::= { qtechAceExtVCEntry 48 } qtechAceExtIfAnyDestIp6VC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Dest Ipv6 address of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 49 } qtechAceExtDestIp6VC OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Dest ipv6 address of Ace flow definition." ::= { qtechAceExtVCEntry 50 } qtechAceExtIfAnyDestIp6WildCardVC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Dest Ipv6 address wild card of class will not be checked if this value is true." DEFVAL{ true } ::= { qtechAceExtVCEntry 51 } qtechAceExtDestIp6WildCardVC OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Dest ipv6 address wild card(in reverse ip address mask)of Ace flow definition." ::= { qtechAceExtVCEntry 52 } -- conformance information qtechAclVCMIBConformance OBJECT IDENTIFIER ::= { qtechAclVCMIB 2 } qtechAclVCMIBCompliances OBJECT IDENTIFIER ::= { qtechAclVCMIBConformance 1 } qtechAclVCMIBGroups OBJECT IDENTIFIER ::= { qtechAclVCMIBConformance 2 } -- compliance statements qtechAclVCMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Qtech Acl MIB for multiple context" MODULE -- this module MANDATORY-GROUPS { qtechAclVCMIBGroup } ::= { qtechAclVCMIBCompliances 1 } -- units of conformance qtechAclVCMIBGroup OBJECT-GROUP OBJECTS { qtechAclContextNameVC, qtechAclNameVC, qtechAclModeVC, qtechAclEntryStatusVC, qtechAceExtContextNameVC, qtechAceExtAclNameVC, qtechAceExtIndexVC, qtechAceExtIfAnyVIDVC, qtechAceExtVIDVC, qtechAceExtIfAnySourceIpVC, qtechAceExtSourceIpVC, qtechAceExtIfAnySourceWildCardVC, qtechAceExtSourceWildCardVC, qtechAceExtIfAnySourceMacAddrVC, qtechAceExtSourceMacAddrVC, qtechAceExtIfAnyDestIpVC, qtechAceExtDestIpVC, qtechAceExtIfAnyDestWildCardVC, qtechAceExtDestIpWildCardVC, qtechAceExtIfAnyDestMacAddrVC, qtechAceExtDestMacAddrVC, qtechAceExtIfAnyEtherLikeTypeVC, qtechAceExtEtherLikeTypeVC, qtechAceExtIfAnyIpProtocolFieldVC, qtechAceExtIpProtocolFieldVC, qtechAceExtSourceProtocolPortVC, qtechAceExtDestProtocolPortVC, qtechAceExtProtocolTypeVC, qtechAceExtProtocolTypeVC, qtechAceExtFlowActionVC, qtechAceExtEntryStautsVC, qtechAceExtTimeRangeNameVC, qtechAceExtSourcePortOpVC, qtechAceExtSourceProtocolPortRangeVC, --qtechAceExtIfAnySourceProtocolPortVC, qtechAceExtDestPortOpVC, qtechAceExtDestProtocolPortRangeVC, --qtechAceExtIfAnyDestProtocolPortVC, qtechAceExtIfAnyCosVC, qtechAceExtCosVC, qtechAceExtIfAnyIpPrecVC, qtechAceExtIpPrecVC, qtechAceExtIfAnyDscpVC, qtechAceExtDscpVC, qtechAceExtIfAnyTcpFlagVC, qtechAceExtTcpFlagVC, qtechAceExtIfAnySourceMacAddrWildCardVC, qtechAceExtSourceMacAddrWildCardVC, qtechAceExtIfAnyDestMacAddrWildCardVC, qtechAceExtDestMacAddrWildCardVC, qtechAceExtIfAnySourceIp6VC, qtechAceExtSourceIp6VC, qtechAceExtIfAnySourceIp6WildCardVC, qtechAceExtSourceIp6WildCardVC, qtechAceExtIfAnyDestIp6VC, qtechAceExtDestIp6VC, qtechAceExtIfAnyDestIp6WildCardVC, qtechAceExtDestIp6WildCardVC, qtechAclIfContextNameVC, qtechAclIfIndexVC, qtechAclIfMaxEntryNumVC, qtechAclIfCurruntEntryNumVC, qtechIfInAclNameVC, qtechIfOutAclNameVC } STATUS current DESCRIPTION "A collection of objects providing acl (echo) ability to a Qtech agent." ::= { qtechAclVCMIBGroups 1 } -- END