TROPIC-ROE-MIB DEFINITIONS ::= BEGIN -- (c) Copyright 2019 Nokia Networks. All rights reserved. -- This software is the confidential and proprietary property of -- Nokia and may only be used in accordance with the terms of the -- license agreement provided with this software. IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, MacAddress FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB TmnxPortID, TItemDescription FROM TN-TC-MIB tnPortModules, tnRoeMib FROM TROPIC-GLOBAL-REG; tnRoeMibModule MODULE-IDENTITY LAST-UPDATED "201808241200Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia Attn: Linhai Qiu Phone: +86 21 38433293 Email: michael.qiu@nokia-sbell.com" DESCRIPTION "The ROE Managed Solution MIB." REVISION "201808241200Z" DESCRIPTION "Initial version." ::= { tnPortModules 10 } ------------------------------------------------------------------------------- -- subtrees in the RoE MIB ------------------------------------------------------------------------------- tnRoeNotifications OBJECT IDENTIFIER ::= { tnRoeMib 0 } tnRoeObjects OBJECT IDENTIFIER ::= { tnRoeMib 1 } tnRoeEConf OBJECT IDENTIFIER ::= { tnRoeMib 2 } tnRoeGroups OBJECT IDENTIFIER ::= { tnRoeEConf 1 } tnEoeCompliances OBJECT IDENTIFIER ::= { tnRoeEConf 2 } tnRoeParameters OBJECT IDENTIFIER ::= { tnRoeObjects 1 } ------------------------------------------------------------------------------- -- Type Definitions ------------------------------------------------------------------------------- TropicRoeCardType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Card Type for TPS products." SYNTAX INTEGER { t24PS1(1), t24PS2(2), t12PS(3) } ------------------------------------------------------------------------------- -- Roe Sequence Number Table ------------------------------------------------------------------------------- tnRoeSeqProfTable OBJECT-TYPE SYNTAX SEQUENCE OF TnRoeSeqProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Roe sequence number table." ::= { tnRoeParameters 1 } tnRoeSeqProfEntry OBJECT-TYPE SYNTAX TnRoeSeqProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in tnRoeSeqTable table. The seq-num-profile is used to specifie the composition of the sequence number field in RoE header for the RoE packets. By default, the seq-num-profile with seq-num-prof-id = 1 exist, which is a system-defined profile applied to RoE mapper and RoE demapper whe no other profile is explicitly specified. The seq-num-profile 1 has seq-num-type = frmr-num. The system seq-num-profile can be modified but not deleted. A profile cannot be modified until all RoE mapper and demappers using this profile are shutdown. A profile cannot be deleted until it is removed from all RoE mapper and demappers where it is applied." INDEX { tnRoeSeqProfCardType, tnRoeSeqProfPortID, tnRoeSeqProfID } ::= { tnRoeSeqProfTable 1 } TnRoeSeqProfEntry ::= SEQUENCE { tnRoeSeqProfCardType TropicRoeCardType, tnRoeSeqProfPortID TmnxPortID, tnRoeSeqProfID Integer32, tnRoeSeqProfDescription TItemDescription, tnRoeSeqProfType INTEGER, tnRoeSeqProfPMax Unsigned32, tnRoeSeqProfPIncProp INTEGER, tnRoeSeqProfPInc Unsigned32, tnRoeSeqProfQMax Unsigned32, tnRoeSeqProfQIncProp INTEGER, tnRoeSeqProfQInc Unsigned32, tnRoeSeqProfRowStatus RowStatus } tnRoeSeqProfCardType OBJECT-TYPE SYNTAX TropicRoeCardType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The card type for TPS." ::= { tnRoeSeqProfEntry 1 } tnRoeSeqProfPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnRoeSeqProfPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { tnRoeSeqProfEntry 2 } tnRoeSeqProfID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequency number profile id, unique within a roe entity." ::= { tnRoeSeqProfEntry 3 } tnRoeSeqProfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes." ::= { tnRoeSeqProfEntry 4 } tnRoeSeqProfType OBJECT-TYPE SYNTAX INTEGER { frmrnum(0), seqnum(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the composition of sequence number file in RoE header. frmrNum - Use 28-bit (BFN,HFN,bFN) in the Sequence number field. Bit 0-4 are zeroes. Bit 5-16 represents BFN. Bit 17-24 represents HFN. Bit 25-31 represents Basic Frame Number. seqNum - Use the compostion of 1914.3 Sequence Numbers. The size of p-counter and q-counter are defined in sub-commands." DEFVAL { frmrnum } ::= { tnRoeSeqProfEntry 5 } tnRoeSeqProfPMax OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when seq-num-type = frmrnum. It configures the maximum numerical value of the p-counter field." DEFVAL { 'ffffffff'h } ::= { tnRoeSeqProfEntry 6 } tnRoeSeqProfPIncProp OBJECT-TYPE SYNTAX INTEGER { fixed(0), payloadsize(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when seq-num-type = frmrnum. It configures the method to increment the p-counter." DEFVAL { 0 } ::= { tnRoeSeqProfEntry 7 } tnRoeSeqProfPInc OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when seq-num-type = frmrnum. It configures the increment value of p-counter on every sent packet." DEFVAL { 1 } ::= { tnRoeSeqProfEntry 8 } tnRoeSeqProfQMax OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when seq-num-type = frmrnum. It configures the maximum numerical value of the q-counter field." DEFVAL { 0 } ::= { tnRoeSeqProfEntry 9 } tnRoeSeqProfQIncProp OBJECT-TYPE SYNTAX INTEGER { fixed(0), payloadsize(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when seq-num-type = frmrnum. This command enables to increment the q-counter." DEFVAL { 0 } ::= { tnRoeSeqProfEntry 10 } tnRoeSeqProfQInc OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when seq-num-type = frmrnum. This command enables to increment the q-counter." DEFVAL { 1 } ::= { tnRoeSeqProfEntry 11 } tnRoeSeqProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnRoeEthlinkRowStatus defines the status of the row." ::= { tnRoeSeqProfEntry 12 } ------------------------------------------------------------------------------- -- Roe Table ------------------------------------------------------------------------------- tnRoeTable OBJECT-TYPE SYNTAX SEQUENCE OF TnRoeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Roe table." ::= { tnRoeParameters 2 } tnRoeEntry OBJECT-TYPE SYNTAX TnRoeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in Roe table. The roe entity is automatically created when the client interface of CPRI/OBSAI type with the mapping type = tunneling / structure-agnostic / structure-aware is created. And it has one-to-one mapping with CPRI/OBSAI interface. When the corresponding interface entity is deleted, the roe entity is deleted automatically. The roe entity is automatically administratively up when the corresponding interface entity is administratively up.The roe entity is automatically administratively down when the corresponding interface entity is administratively down." INDEX { tnRoeCardType, tnRoePortID } ::= { tnRoeTable 1 } TnRoeEntry ::= SEQUENCE { tnRoeCardType TropicRoeCardType, tnRoePortID TmnxPortID, tnRoeDescription TItemDescription, tnRoeOrderInfoType INTEGER, tnRoePresTimeOffset Integer32, tnRoeCpriTxGenOffset OCTET STRING, tnRoeAutoUponChange INTEGER, tnRoeSeqNumProfID Integer32, tnRoeInitialTxBFN Integer32, tnRoeInitialTxHFN Integer32, tnRoeEncapMode INTEGER, tnRoeAdminState INTEGER, tnRoePmonPolicy Integer32, tnRoeRowStatus RowStatus } tnRoeCardType OBJECT-TYPE SYNTAX TropicRoeCardType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The card type for TPS." ::= { tnRoeEntry 1 } tnRoePortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnRoePortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { tnRoeEntry 2 } tnRoeDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes." ::= { tnRoeEntry 3 } tnRoeOrderInfoType OBJECT-TYPE SYNTAX INTEGER { prestime(0), seqnum(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The orderInfo field in RoE header. This parameter can be modified only when roe is shutdown. prestime - Presentation Time filled in OrderInfo field of RoE header. seqnum - Sequence Number filled in OrderInfo field of RoE header." DEFVAL { 0 } ::= { tnRoeEntry 4 } tnRoePresTimeOffset OBJECT-TYPE SYNTAX Integer32 (0..1677721600) MAX-ACCESS read-create STATUS current DESCRIPTION "The time in the unit of 1/100 of nanosecond. 0 is a specical value, which means the offset is automatically adjusted by the RoE mapper based on the latency measurement." DEFVAL { 0 } ::= { tnRoeEntry 5 } tnRoeCpriTxGenOffset OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) MAX-ACCESS read-create STATUS current DESCRIPTION "The time in the unit of 1/100 of nanosecond. Applicable only when order-info-type is set to seq-num. Specifies the offset time to start the transmission of CPRI frames at CPRI egress. CPRI egress starts to send CPRI frame when the global reference time is greater than or equal to CPRI Tx gen offset. cpri-tx-gen-offset is aligned to the time epoc of the time source of this node. This parameter can be modified only when roe is shutdown." ::= { tnRoeEntry 6 } tnRoeAutoUponChange OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the automatic adjustment of ts-gen-offset when the network delay changes due to the topology change, e.g., protection switch. Applicable only when order-info-type is set to seq-num. This parameter can be modified only when roe is shutdown." ::= { tnRoeEntry 7 } tnRoeSeqNumProfID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS read-create STATUS current DESCRIPTION "Applicable only when order-info-type is set to seq-num. Associate a sequence number profile with the RoE entity. This paramete can be modified only when roe is shutdown." DEFVAL { 1 } ::= { tnRoeEntry 8 } tnRoeInitialTxBFN OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The BFN in the initial Hyperframe control word at CPRI egress. Applicable only when order-info-type is set to seq-num. It configures the bfn (BFN field in CPRI control word) in the initial hyperframe. It can be modified only when roe is shutdown." DEFVAL { 1 } ::= { tnRoeEntry 9 } tnRoeInitialTxHFN OBJECT-TYPE SYNTAX Integer32 (0..149) MAX-ACCESS read-create STATUS current DESCRIPTION "HFN in the next hyperframe control word. Aplicable only when order-info-type is set to seq-num. It specifies the HFN in initial CPRI hyperframe control word at CPRI egress. It can be modified only when roe is shutdown." DEFVAL { 0 } ::= { tnRoeEntry 10 } tnRoeEncapMode OBJECT-TYPE SYNTAX INTEGER { tunneling(0), structure-agnostic(1), structure-aware(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "tunneling - 10B or 66B line codes are encapsulted into RoE packets. structure-agnostic - CPRI basic frames in 8B or 64B symbols removing the line coding and (if any) scrambling and FEC, are encapsulated into RoE packets. structure-aware - CPRI/OBSAI AxC and Control signals are extracted and excapsulated into separate flows of RoE packets." ::= { tnRoeEntry 11 } tnRoeAdminState OBJECT-TYPE SYNTAX INTEGER { up(0), down(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "up - The administrative state is up. down - The administrative state is down." ::= { tnRoeEntry 12 } tnRoePmonPolicy OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-create STATUS current DESCRIPTION "PMON policy id assoicated to the RoE." ::= { tnRoeEntry 13 } tnRoeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnRoeRowStatus defines the status of the row." ::= { tnRoeEntry 14 } ------------------------------------------------------------------------------- -- Roe Mapper Table ------------------------------------------------------------------------------- tnRoeMapperTable OBJECT-TYPE SYNTAX SEQUENCE OF TnRoeMapperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Roe Mapper table." ::= { tnRoeParameters 3 } tnRoeMapperEntry OBJECT-TYPE SYNTAX TnRoeMapperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in Roe Mapper table. It creates or edits a mapper of structure-agnostic type when the encap-mode of the corresponding roe is structure-agnostic. In structure-agnostic mode, at most 1 mapper can be created in a roe entity. When a mapper is created, the create keyword must be specified. By default, no mappers exist until they are explicitly created. The mapper can be deleted only after it is shutdown." INDEX { tnRoeMapperCardType, tnRoeMapperPortID, tnRoeMapperID } ::= { tnRoeMapperTable 1 } TnRoeMapperEntry ::= SEQUENCE { tnRoeMapperCardType TropicRoeCardType, tnRoeMapperPortID TmnxPortID, tnRoeMapperID Integer32, tnRoeMapperDescription TItemDescription, tnRoeMapperFlowID Integer32, tnRoeMappeEtherlinkID Integer32, tnRoeMapperPayloadLen Integer32, tnRoeMapperSyncMode INTEGER, tnRoeMapperBfn Integer32, tnRoeMapperHfn Integer32, tnRoeMapperBfrm Integer32, tnRoeMapperShutdown INTEGER, tnRoeMapperType INTEGER, tnRoeMapperOrderInfoType INTEGER, tnRoeMapperPmonPolicy Integer32, tnRoeMapperRowStatus RowStatus } tnRoeMapperCardType OBJECT-TYPE SYNTAX TropicRoeCardType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The card type for TPS." ::= { tnRoeMapperEntry 1 } tnRoeMapperPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnRoePortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { tnRoeMapperEntry 2 } tnRoeMapperID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the mapper id, unique within a roe entity." ::= { tnRoeMapperEntry 3 } tnRoeMapperDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes." ::= { tnRoeMapperEntry 4 } tnRoeMapperFlowID OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-create STATUS current DESCRIPTION "This command configures the flowid used in 'flowID' field in RoE header. flowid has no default value, and must be specified by the user. This parameter can be modified only when roe is shutdown." ::= { tnRoeMapperEntry 5 } tnRoeMappeEtherlinkID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the ethlink id, used to configure the ethernet frame header. This parameter has no default value. It must be explicitly configured. This parameter can be modified only when roe is shutdown." ::= { tnRoeMapperEntry 6 } tnRoeMapperPayloadLen OBJECT-TYPE SYNTAX Integer32 (512 .. 1500) MAX-ACCESS read-create STATUS current DESCRIPTION "The payload length in units of bytes. In Structure Agnostic mode with line coding aware, the payload length can only be the 1, 1.5 , 2, 4, 8 times of basic frames. The length of the payload in RoE packets after the RoE common header and before FCS. For structure-agnostic mode, it must be multiple of basic frames. And correspondingly, the encap buffer is fixed to 2 x payload-len. This parameter can be modified only when roe is shutdown." DEFVAL { 512 } ::= { tnRoeMapperEntry 7 } tnRoeMapperSyncMode OBJECT-TYPE SYNTAX INTEGER { hyper(0), radio(1), basic(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The sync mode to control when to generate the presentation time. Only when the basic frame number and/or bfn/hfn in received CPRI frame matches the basic frame number and/or bfn/hfn specified by the user based on the sync mode, roe mapper generates the presentation time for it. It can be modified only when mapper is shutdown." DEFVAL { 2 } ::= { tnRoeMapperEntry 8 } tnRoeMapperBfn OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the bfn used for sync." DEFVAL { 0 } ::= { tnRoeMapperEntry 9 } tnRoeMapperHfn OBJECT-TYPE SYNTAX Integer32 (0..149) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the bfn used for sync." DEFVAL { 0 } ::= { tnRoeMapperEntry 10 } tnRoeMapperBfrm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the basic frame number used for sync." DEFVAL { 0 } ::= { tnRoeMapperEntry 11 } tnRoeMapperShutdown OBJECT-TYPE SYNTAX INTEGER { shutdown (0), no-shutdwn (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Shutdown an RoE mapper entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. RoE Mappers must be shut down before they may be deleted. RoE mappers are created in the administratively down (shutdown) state. When a no shutdown command is entered, the entity becomes administratively up." ::= { tnRoeMapperEntry 12 } tnRoeMapperType OBJECT-TYPE SYNTAX INTEGER { tunneling(0), structure-agnostic(1), structure-Aware-Data(2), structure-Aware-Control(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of the mapper: Tunneling, Structure Agnostic, Structure-Aware Data, Structure-Aware Control." ::= { tnRoeMapperEntry 13 } tnRoeMapperOrderInfoType OBJECT-TYPE SYNTAX INTEGER { prestime(0), seqnum(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "SeqNum or Presentation Time." ::= { tnRoeMapperEntry 14 } tnRoeMapperPmonPolicy OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-create STATUS current DESCRIPTION "PMON policy id assoicated to the RoE Mapper." ::= { tnRoeMapperEntry 15 } tnRoeMapperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnRoeMapperRowStatus defines the status of the row." ::= { tnRoeMapperEntry 16 } ------------------------------------------------------------------------------- -- Roe De-Mapper Table ------------------------------------------------------------------------------- tnRoeDeMapperTable OBJECT-TYPE SYNTAX SEQUENCE OF TnRoeDeMapperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Roe DeMapper table." ::= { tnRoeParameters 4 } tnRoeDeMapperEntry OBJECT-TYPE SYNTAX TnRoeDeMapperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in Roe DeMapper table. It creates or edits a demapper of structure-agnostic type when the encap-mode of the corresponding roe is structure-agnostic. In structure-agnostic mode, at most 1 demapper can be created in a roe entity. When a demapper is created, the create keyword must be specified. By default, no demappers exist until they are explicitly created. The demapper can be deleted only after it is shutdown." INDEX { tnRoeDeMapperCardType, tnRoePortID, tnRoeDeMapperID } ::= { tnRoeDeMapperTable 1 } TnRoeDeMapperEntry ::= SEQUENCE { tnRoeDeMapperCardType TropicRoeCardType, tnRoeDeMapperPortID TmnxPortID, tnRoeDeMapperID Integer32, tnRoeDeMapperDescription TItemDescription, tnRoeDeMappeEtherlinkID Integer32, tnRoeDeMapperPayloadLen Integer32, tnRoeDeMapperSyncMode INTEGER, tnRoeDeMapperBfn Integer32, tnRoeDeMapperHfn Integer32, tnRoeDeMapperBfrm Integer32, tnRoeDeMapperJitterBufferDepth Integer32, tnRoeDeMapperShutdown INTEGER, tnRoeDeMapperType INTEGER, tnRoeDeMapperFlowID Integer32, tnRoeDeMapperOrderInfoType INTEGER, tnRoeDeMapperPmonPolicy Integer32, tnRoeDeMapperRowStatus RowStatus } tnRoeDeMapperCardType OBJECT-TYPE SYNTAX TropicRoeCardType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The card type for TPS." ::= { tnRoeDeMapperEntry 1 } tnRoeDeMapperPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnRoeDeMapperPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { tnRoeDeMapperEntry 2 } tnRoeDeMapperID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the de-mapper id, unique within a roe entity." ::= { tnRoeDeMapperEntry 3 } tnRoeDeMapperDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes." ::= { tnRoeDeMapperEntry 4 } tnRoeDeMappeEtherlinkID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the ethlink id, used to configure the ethernet frame header. This parameter has no default value. It must be explicitly configured. This parameter can be modified only when roe is shutdown." ::= { tnRoeDeMapperEntry 5 } tnRoeDeMapperPayloadLen OBJECT-TYPE SYNTAX Integer32 (512..1500) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the length of the payload in RoE packets after the RoE common header and before FCS. For structure-agnostic mode, it must be multiple of basic frames. And correspondingly, the encap buffer is fixed to 2 x payload-len." DEFVAL { 512 } ::= { tnRoeDeMapperEntry 6 } tnRoeDeMapperSyncMode OBJECT-TYPE SYNTAX INTEGER { hyper(0), radio(1), basic(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This command configures the sync mode to control when to generate the presentation time. Only when the basic frame number and/or bfn/hfn in received CPRI frame matches the basic frame number and/or bfn/hfn specified by the user based on the sync mode, roe mapper generates the presentation time for it. This parameter can be modified only when mapper is shutdown." DEFVAL { 0 } ::= { tnRoeDeMapperEntry 7 } tnRoeDeMapperBfn OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the bfn used for sync." DEFVAL { 0 } ::= { tnRoeDeMapperEntry 8 } tnRoeDeMapperHfn OBJECT-TYPE SYNTAX Integer32 (0..149) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the bfn used for sync." DEFVAL { 0 } ::= { tnRoeDeMapperEntry 9 } tnRoeDeMapperBfrm OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the basic frame number used for sync." DEFVAL { 0 } ::= { tnRoeDeMapperEntry 10 } tnRoeDeMapperJitterBufferDepth OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the basic frame number used for sync." DEFVAL { 256 } ::= { tnRoeDeMapperEntry 11 } tnRoeDeMapperShutdown OBJECT-TYPE SYNTAX INTEGER { shutdown(0), no-shutdwn(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This command administratively disables an RoE mapper entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. RoE mappers must be shut down before they may be deleted. RoE mappers are created in the administratively down (shutdown) state. When a no shutdown command is entered, the entity becomes administratively up." DEFVAL { 1 } ::= { tnRoeDeMapperEntry 12 } tnRoeDeMapperType OBJECT-TYPE SYNTAX INTEGER { tunneling(0), structureAgnostic(1), structureAwareData(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of the mapper: Tunneling, Structure Agnostic, Structure-Aware Data." ::= { tnRoeDeMapperEntry 13 } tnRoeDeMapperFlowID OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The flowid used in 'flowID' field in RoE header." ::= { tnRoeDeMapperEntry 14 } tnRoeDeMapperOrderInfoType OBJECT-TYPE SYNTAX INTEGER { prestime(0), seqnum(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The flowid used in 'flowID' field in RoE header." ::= { tnRoeDeMapperEntry 15 } tnRoeDeMapperPmonPolicy OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-create STATUS current DESCRIPTION "PMON policy id assoicated to the RoE DeMapper." ::= { tnRoeDeMapperEntry 16 } tnRoeDeMapperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnRoeMapperRowStatus defines the status of the row." ::= { tnRoeDeMapperEntry 17 } ------------------------------------------------------------------------------- -- Roe ethlink Table ------------------------------------------------------------------------------- tnRoeEthlinkTable OBJECT-TYPE SYNTAX SEQUENCE OF TnRoeEthlinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Roe Eth Link table." ::= { tnRoeParameters 5 } tnRoeEthlinkEntry OBJECT-TYPE SYNTAX TnRoeEthlinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in Roe DeMapper table. It creates or edits an ethlink entity, which specifies the Ethernet frame header for the RoE packets. The ethlink ID is unique within the RoE entity. When a ethlink is created, the create keyword must be specified. By default, no ethlink entities exist until they are explicitly created." INDEX { tnRoeEthlinkCardType, tnRoeEthlinkPortID, tnRoeEthlinkID } ::= { tnRoeEthlinkTable 1 } TnRoeEthlinkEntry ::= SEQUENCE { tnRoeEthlinkCardType TropicRoeCardType, tnRoeEthlinkPortID TmnxPortID, tnRoeEthlinkID Integer32, tnRoeEthlinkDescription TItemDescription, tnRoeEthlinkDestMac MacAddress, tnRoeEthlinkSourceMac MacAddress, tnRoeEthlinkTagDepth INTEGER, tnRoeEthlinkOuterEthertype Integer32, tnRoeEthlinkOuterVid Integer32, tnRoeEthlinkOuterPri Integer32, tnRoeEthlinkInnerEthertype Integer32, tnRoeEthlinkInnerVid Integer32, tnRoeEthlinkInnerPri Integer32, tnRoeEthlinkEthertype Integer32, tnRoeEthlinkRowStatus RowStatus } tnRoeEthlinkCardType OBJECT-TYPE SYNTAX TropicRoeCardType MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnRoeEthlinkCardType is an index into this table. It specify the card type for TPS." ::= { tnRoeEthlinkEntry 1 } tnRoeEthlinkPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnRoeEthlinkPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { tnRoeEthlinkEntry 2 } tnRoeEthlinkID OBJECT-TYPE SYNTAX Integer32 (1..80) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the ethlink id, unique within a roe entity." ::= { tnRoeEthlinkEntry 3 } tnRoeEthlinkDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes." ::= { tnRoeEthlinkEntry 4 } tnRoeEthlinkDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the 48-bit MAC address. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses. {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - MAC address, where xx is hexadecimal numbers." ::= { tnRoeEthlinkEntry 5 } tnRoeEthlinkSourceMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the 48-bit MAC address of the port. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses. {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - MAC address, where xx is hexadecimal numbers." ::= { tnRoeEthlinkEntry 6 } tnRoeEthlinkTagDepth OBJECT-TYPE SYNTAX INTEGER { untagged(0), single(1), double(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The number of VLAN tags used in the Ethernet frame header." DEFVAL { 0 } ::= { tnRoeEthlinkEntry 7 } tnRoeEthlinkOuterEthertype OBJECT-TYPE SYNTAX Integer32 ('600'H..'ffff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "The ethertype for the outer tag when double tags are used in Ethernet Frame header, i.e., tag-depth is double." DEFVAL { '8100'H } ::= { tnRoeEthlinkEntry 8 } tnRoeEthlinkOuterVid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID of the outer VLAN tag in Ethernet Frame Header if double tag is used, i.e., tag-depth is double." ::= { tnRoeEthlinkEntry 9 } tnRoeEthlinkOuterPri OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the priority of the outer VLAN tag in Ethernet Frame Header if double tag is used, i.e., tag-depth is double. Default: 7." DEFVAL { 7 } ::= { tnRoeEthlinkEntry 10 } tnRoeEthlinkInnerEthertype OBJECT-TYPE SYNTAX Integer32 ('600'H..'ffff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "The ethertype for the inner tag when single or double tags are used in Ethernet Frame header, i.e., tag-depth is single or double." DEFVAL { '8100'H } ::= { tnRoeEthlinkEntry 11 } tnRoeEthlinkInnerVid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID of the inner VLAN tag in Ethernet Frame Header if either single or double tag is used, i.e., tag-depth is single or double." ::= { tnRoeEthlinkEntry 12 } tnRoeEthlinkInnerPri OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of the inner VLAN tag in Ethernet Frame Header if single or double tag is used, i.e., tag-depth is single or double." DEFVAL { 7 } ::= { tnRoeEthlinkEntry 13 } tnRoeEthlinkEthertype OBJECT-TYPE SYNTAX Integer32 ('600'H..'ffff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "The ethertype for RoE PDU." DEFVAL { 'FC3D'H } ::= { tnRoeEthlinkEntry 14} tnRoeEthlinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnRoeEthlinkRowStatus defines the status of the row." ::= { tnRoeEthlinkEntry 15 } ------------------------------------------------------------------------------- -- Compliance Statements ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- -- Conformance Group Definitions ------------------------------------------------------------------------------- tnRoeSeqProfGroup OBJECT-GROUP OBJECTS { tnRoeSeqProfDescription, tnRoeSeqProfType, tnRoeSeqProfPMax, tnRoeSeqProfPIncProp, tnRoeSeqProfPInc, tnRoeSeqProfQMax, tnRoeSeqProfQIncProp, tnRoeSeqProfQInc, tnRoeSeqProfRowStatus } STATUS current DESCRIPTION "." ::= { tnRoeGroups 1 } tnRoeGroup OBJECT-GROUP OBJECTS { tnRoeDescription, tnRoeOrderInfoType, tnRoePresTimeOffset, tnRoeCpriTxGenOffset, tnRoeAutoUponChange, tnRoeSeqNumProfID, tnRoeInitialTxBFN, tnRoeInitialTxHFN, tnRoeEncapMode, tnRoeAdminState, tnRoePmonPolicy, tnRoeRowStatus } STATUS current DESCRIPTION "." ::= { tnRoeGroups 2 } tnRoeMapperGroup OBJECT-GROUP OBJECTS { tnRoeMapperDescription, tnRoeMapperFlowID, tnRoeMappeEtherlinkID, tnRoeMapperPayloadLen, tnRoeMapperSyncMode, tnRoeMapperBfn, tnRoeMapperHfn, tnRoeMapperBfrm, tnRoeMapperShutdown, tnRoeMapperType, tnRoeMapperOrderInfoType, tnRoeMapperPmonPolicy, tnRoeMapperRowStatus } STATUS current DESCRIPTION "." ::= { tnRoeGroups 3 } tnRoeDeMapperGroup OBJECT-GROUP OBJECTS { tnRoeDeMapperDescription, tnRoeDeMappeEtherlinkID, tnRoeDeMapperPayloadLen, tnRoeDeMapperSyncMode, tnRoeDeMapperBfn, tnRoeDeMapperHfn, tnRoeDeMapperBfrm, tnRoeDeMapperJitterBufferDepth, tnRoeDeMapperShutdown, tnRoeDeMapperType, tnRoeDeMapperFlowID, tnRoeDeMapperOrderInfoType, tnRoeDeMapperPmonPolicy, tnRoeDeMapperRowStatus } STATUS current DESCRIPTION "." ::= { tnRoeGroups 4 } tnRoeEthlinkGroup OBJECT-GROUP OBJECTS { tnRoeEthlinkDescription, tnRoeEthlinkDestMac, tnRoeEthlinkSourceMac, tnRoeEthlinkTagDepth, tnRoeEthlinkOuterEthertype, tnRoeEthlinkOuterVid, tnRoeEthlinkOuterPri, tnRoeEthlinkInnerEthertype, tnRoeEthlinkInnerVid, tnRoeEthlinkInnerPri, tnRoeEthlinkEthertype, tnRoeEthlinkRowStatus } STATUS current DESCRIPTION "." ::= { tnRoeGroups 5 } ------------------------------------------------------------------------------- -- Compliance Statements (mandatory) ------------------------------------------------------------------------------- tnRoeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "." MODULE MANDATORY-GROUPS { tnRoeSeqProfGroup, tnRoeGroup, tnRoeMapperGroup, tnRoeDeMapperGroup, tnRoeEthlinkGroup } ::= { tnEoeCompliances 1 } END -- DEFINITION OF TROPIC-ROE-MIB