-- Copyright 2006, 2007 MITEL Networks Corporation -- All rights reserved. -- This MITEL SNMP Management Information Base Specification -- (Specification) embodies MITEL's confidential and -- proprietary intellectual property. MITEL retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS", and MITEL makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. MITEL-BWM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DateAndTime, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF mitelIpera3000Applications FROM MITEL-IperaVoiceLAN-MIB; mitelBandWidthManagement MODULE-IDENTITY LAST-UPDATED "200703261541Z" ORGANIZATION "MITEL Networks Corporation" CONTACT-INFO "Standards Group, Postal: MITEL Networks Corporation 350 Legget Drive, PO Box 13089 Kanata, Ontario Canada K2K 2W7 Tel: +1 613 592 2122 Fax: +1 613 592 4784 E-mail: std@mitel.com" DESCRIPTION "MIB for the Mitel Ipera 3000 Bandwidth Management Application." REVISION "200703261541Z" DESCRIPTION "Added Units to the object descriptions." REVISION "200608281626Z" DESCRIPTION "Initial Version." ::= { mitelIpera3000Applications 1 } -- **************************************************************** -- MITEL Ipera 3000 BWM Contents -- **************************************************************** -- Notifications -- mitelBWMNotifications OBJECT IDENTIFIER ::= { mitelBandWidthManagement XXX } -- Note: Notifications will be handled by the Mitel common alarm framework -- (private.enterprises.mitel.mitelProprietary.mitelPropCommon.mitelCmnAlarms), -- and therefore no notifications branch is required. -- Tables, Scalars mitelBWMObjects OBJECT IDENTIFIER ::= { mitelBandWidthManagement 1 } -- Conformance mitelBWMConformance OBJECT IDENTIFIER ::= { mitelBandWidthManagement 2 } -- **************************************************************** -- MITEL Ipera 3000 BWM-specific Textual Conventions -- **************************************************************** MitelBWMPercentage ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Percentage value (from 0 to 100)." SYNTAX Integer32 (0..100) MitelBWMZoneID ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Zone Identifier." SYNTAX Integer32 (1..250) MitelBWMZAPID ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Zone Access Point Identifier." SYNTAX Integer32 (1..6) -- **************************************************************** -- MITEL Ipera 3000 BWM Current Bandwidth Table -- **************************************************************** -- This table contains statistics about the state of bandwidth management for zone -- access points managed currently by this ICP. -- This table will be empty unless bandwidth reporting & statistics is enabled, -- and at least one zone access point is defined as managed by this ICP. mitelBWMCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF MitelBWMCurrentTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains current statistics related to bandwidth management for zone access points managed by this ICP." ::= { mitelBWMObjects 1 } mitelBWMCurrentTableEntry OBJECT-TYPE SYNTAX MitelBWMCurrentTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row defining a single current bandwidth table entry." INDEX { mitelBWMCurrentZoneID, mitelBWMCurrentParentZoneID, mitelBWMCurrentZAPID } ::= { mitelBWMCurrentTable 1 } MitelBWMCurrentTableEntry::= SEQUENCE { mitelBWMCurrentZoneID MitelBWMZoneID, mitelBWMCurrentParentZoneID MitelBWMZoneID, mitelBWMCurrentZAPID MitelBWMZAPID, mitelBWMCurrentZAPLabel DisplayString, mitelBWMCurrentBandwidthInUse Gauge32, mitelBWMCurrentBandwidthLimit Gauge32, mitelBWMCurrentBandwidthRatio MitelBWMPercentage } mitelBWMCurrentZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a)." ::= { mitelBWMCurrentTableEntry 1 } mitelBWMCurrentParentZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c)." ::= { mitelBWMCurrentTableEntry 2 } mitelBWMCurrentZAPID OBJECT-TYPE SYNTAX MitelBWMZAPID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b)." ::= { mitelBWMCurrentTableEntry 3 } mitelBWMCurrentZAPLabel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This the zone access point label, as supplied by the user." ::= { mitelBWMCurrentTableEntry 4 } mitelBWMCurrentBandwidthInUse OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the bandwidth currently in use at the zone access point by managed voice over IP media streams. Units in kilobits per second." ::= { mitelBWMCurrentTableEntry 5 } mitelBWMCurrentBandwidthLimit OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the bandwidth limit currently configured at the zone access point for managed voice over IP media streams. Units in kilobits per second." ::= { mitelBWMCurrentTableEntry 6 } mitelBWMCurrentBandwidthRatio OBJECT-TYPE SYNTAX MitelBWMPercentage MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ratio of mitelBWMCurrentBandwidthInUse to mitelBWMCurrentBandwidthLimit expressed as a percentage." ::= { mitelBWMCurrentTableEntry 7 } -- **************************************************************** -- MITEL Ipera 3000 BWM Cumulative CAC Stats Table -- **************************************************************** -- This table contains cumulative statistics about the number of calls which -- have been admitted or rejected by connection admission control based on -- bandwidth availability at zone access points managed currently by this ICP. -- This table will be empty unless connection admission control is enabled, -- and at least one zone access point is defined as managed by this ICP. mitelBWMCumCACTable OBJECT-TYPE SYNTAX SEQUENCE OF MitelBWMCumCACTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains cumulative statistics related to bandwidth management connection admission control for zone access points managed by this ICP." ::= { mitelBWMObjects 2 } mitelBWMCumCACTableEntry OBJECT-TYPE SYNTAX MitelBWMCumCACTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row defining a single cumulative connection admission control statistics table entry." INDEX { mitelBWMCumZoneID, mitelBWMCumParentZoneID, mitelBWMCumZAPID } ::= { mitelBWMCumCACTable 1 } MitelBWMCumCACTableEntry ::= SEQUENCE { mitelBWMCumZoneID MitelBWMZoneID, mitelBWMCumParentZoneID MitelBWMZoneID, mitelBWMCumZAPID MitelBWMZAPID, mitelBWMCumZAPLabel DisplayString, mitelBWMCumCACAdmissions Counter32, mitelBWMCumCACRejections Counter32, mitelBWMCumCACRejectionRatio MitelBWMPercentage } mitelBWMCumZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a)." ::= { mitelBWMCumCACTableEntry 1 } mitelBWMCumParentZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c)." ::= { mitelBWMCumCACTableEntry 2 } mitelBWMCumZAPID OBJECT-TYPE SYNTAX MitelBWMZAPID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b)." ::= { mitelBWMCumCACTableEntry 3 } mitelBWMCumZAPLabel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This the zone access point label, as supplied by the user." ::= { mitelBWMCumCACTableEntry 4 } mitelBWMCumCACAdmissions OBJECT-TYPE SYNTAX Counter32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of calls admitted through this zone access point by this ICP since the system was started or the zone access point was created, or since the cumulative statistics were cleared." ::= { mitelBWMCumCACTableEntry 5 } mitelBWMCumCACRejections OBJECT-TYPE SYNTAX Counter32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of calls rejected due to bandwidth being fully utilized at this zone access point by this ICP since the system was started or the zone access point was created, or since the cumulative statistics were cleared." ::= { mitelBWMCumCACTableEntry 6 } mitelBWMCumCACRejectionRatio OBJECT-TYPE SYNTAX MitelBWMPercentage MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ratio of mitelBWMCACRejections to the sum of mitelBWMCACRejections and mitelBWMCACAdmissions (i.e. rejections to all calls) expressed as a percentage." ::= { mitelBWMCumCACTableEntry 7 } -- **************************************************************** -- MITEL Ipera 3000 BWM 15 Minute Historical Statistics Table -- **************************************************************** -- This table contains historical bandwidth management statistics for zone -- access points managed currently by this ICP recorded at 15 minute intervals. -- This table will be empty unless connection admission control or bandwidth -- reporting & statistics are enabled, and at least one zone access point is -- defined as managed by this ICP. mitelBWM15MinHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF MitelBWM15MinHistoryTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains historical statistics recorded at 15 minute intervals related to bandwidth management for zone access points managed by this ICP." ::= { mitelBWMObjects 3 } mitelBWM15MinHistoryTableEntry OBJECT-TYPE SYNTAX MitelBWM15MinHistoryTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row defining a single 15 minute interval for a specific zone access point in the 15 minute historical table." INDEX { mitelBWM15MinZoneID, mitelBWM15MinParentZoneID, mitelBWM15MinZAPID, mitelBWM15MinDateAndTime } ::= { mitelBWM15MinHistoryTable 1 } MitelBWM15MinHistoryTableEntry ::= SEQUENCE { mitelBWM15MinZoneID MitelBWMZoneID, mitelBWM15MinParentZoneID MitelBWMZoneID, mitelBWM15MinZAPID MitelBWMZAPID, mitelBWM15MinDateAndTime DateAndTime, mitelBWM15MinZAPLabel DisplayString, mitelBWM15MinCACAdmissions Counter32, mitelBWM15MinCACRejections Counter32, mitelBWM15MinCACRejectionRatio MitelBWMPercentage, mitelBWM15MinAverageBandwidthUsed Gauge32, mitelBWM15MinPeakBandwidthUsed Gauge32, mitelBWM15MinAverageAvailable Gauge32, mitelBWM15MinFinalBandwidthLimit Gauge32, mitelBWM15MinPeakBandwidthRatio MitelBWMPercentage, mitelBWM15MinPeakBwdthAboveLimit Gauge32 } mitelBWM15MinZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a)." ::= { mitelBWM15MinHistoryTableEntry 1 } mitelBWM15MinParentZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c)." ::= { mitelBWM15MinHistoryTableEntry 2 } mitelBWM15MinZAPID OBJECT-TYPE SYNTAX MitelBWMZAPID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b)." ::= { mitelBWM15MinHistoryTableEntry 3 } mitelBWM15MinDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The system date and time as set when the interval was recorded. Note that if the system date and time are changed while recording intervals, the interval with the earliest Date and Time value may not necessarily be the oldest entry." ::= { mitelBWM15MinHistoryTableEntry 4 } mitelBWM15MinZAPLabel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This the zone access point label, as supplied by the user." ::= { mitelBWM15MinHistoryTableEntry 5 } mitelBWM15MinCACAdmissions OBJECT-TYPE SYNTAX Counter32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of calls admitted through this zone access point by this ICP during the interval." ::= { mitelBWM15MinHistoryTableEntry 6 } mitelBWM15MinCACRejections OBJECT-TYPE SYNTAX Counter32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of calls rejected due to bandwidth being fully utilized at this zone access point by this ICP during the interval." ::= { mitelBWM15MinHistoryTableEntry 7 } mitelBWM15MinCACRejectionRatio OBJECT-TYPE SYNTAX MitelBWMPercentage MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ratio of mitelBWMCACRejections to the sum of mitelBWMCACRejections and mitelBWMCACAdmissions (i.e. rejections to all calls) expressed as a percentage." ::= { mitelBWM15MinHistoryTableEntry 8 } mitelBWM15MinAverageBandwidthUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average bandwidth in use at the zone access point by managed voice over IP media streams over the interval. Units in kilobits per second." ::= { mitelBWM15MinHistoryTableEntry 9 } mitelBWM15MinPeakBandwidthUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the peak bandwidth limit in use at the zone access point by managed voice over IP media streams during the interval. Units in kilobits per second." ::= { mitelBWM15MinHistoryTableEntry 10 } mitelBWM15MinAverageAvailable OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average bandwidth available at the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second." ::= { mitelBWM15MinHistoryTableEntry 11 } mitelBWM15MinFinalBandwidthLimit OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the configured bandwidth limit for the zone access point for managed voice over IP media streams recorded at the end of the interval. Units in kilobits per second." ::= { mitelBWM15MinHistoryTableEntry 12 } mitelBWM15MinPeakBandwidthRatio OBJECT-TYPE SYNTAX MitelBWMPercentage MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ratio of mitelBWMPeakBandwidthUsed to mitelBWMFinalBandwidthLimit expressed as a percentage." ::= { mitelBWM15MinHistoryTableEntry 13 } mitelBWM15MinPeakBwdthAboveLimit OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the difference between mitelBWMPeakBandwidthUsed and mitelBWMFinalBandwidthLimit if it was ever over the limit for the the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second." ::= { mitelBWM15MinHistoryTableEntry 14 } -- **************************************************************** -- MITEL Ipera 3000 BWM 24 Hour Historical Statistics Table -- **************************************************************** -- This table contains historical bandwidth management statistics for zone -- access points managed currently by this ICP recorded at 24 hour intervals. -- This table will be empty unless connection admission control or bandwidth -- reporting & statistics are enabled, and at least one zone access point is -- defined as managed by this ICP. mitelBWM24HrHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF MitelBWM24HrHistoryTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains historical statistics recorded at 24 hour intervals related to bandwidth management for zone access points managed by this ICP." ::= { mitelBWMObjects 4 } mitelBWM24HrHistoryTableEntry OBJECT-TYPE SYNTAX MitelBWM24HrHistoryTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row defining a single 24 hour interval for a specific zone access point in the 24 hour historical table." INDEX { mitelBWM24HrZoneID, mitelBWM24HrParentZoneID, mitelBWM24HrZAPID, mitelBWM24HrDateAndTime } ::= { mitelBWM24HrHistoryTable 1 } MitelBWM24HrHistoryTableEntry ::= SEQUENCE { mitelBWM24HrZoneID MitelBWMZoneID, mitelBWM24HrParentZoneID MitelBWMZoneID, mitelBWM24HrZAPID MitelBWMZAPID, mitelBWM24HrDateAndTime DateAndTime, mitelBWM24HrZAPLabel DisplayString, mitelBWM24HrCACAdmissions Counter32, mitelBWM24HrCACRejections Counter32, mitelBWM24HrCACRejectionRatio MitelBWMPercentage, mitelBWM24HrAverageBandwidthUsed Gauge32, mitelBWM24HrPeakBandwidthUsed Gauge32, mitelBWM24HrAverageAvailable Gauge32, mitelBWM24HrFinalBandwidthLimit Gauge32, mitelBWM24HrPeakBandwidthRatio MitelBWMPercentage, mitelBWM24HrPeakBwdthAboveLimit Gauge32 } mitelBWM24HrZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a)." ::= { mitelBWM24HrHistoryTableEntry 1 } mitelBWM24HrParentZoneID OBJECT-TYPE SYNTAX MitelBWMZoneID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c)." ::= { mitelBWM24HrHistoryTableEntry 2 } mitelBWM24HrZAPID OBJECT-TYPE SYNTAX MitelBWMZAPID MAX-ACCESS read-only STATUS current DESCRIPTION "A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b)." ::= { mitelBWM24HrHistoryTableEntry 3 } mitelBWM24HrDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The system date and time as set when the interval was recorded. Note that if the system date and time are changed while recording intervals, the interval with the earliest Date and Time value may not necessarily be the oldest entry." ::= { mitelBWM24HrHistoryTableEntry 4 } mitelBWM24HrZAPLabel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This the zone access point label, as supplied by the user." ::= { mitelBWM24HrHistoryTableEntry 5 } mitelBWM24HrCACAdmissions OBJECT-TYPE SYNTAX Counter32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of calls admitted through this zone access point by this ICP during the interval." ::= { mitelBWM24HrHistoryTableEntry 6 } mitelBWM24HrCACRejections OBJECT-TYPE SYNTAX Counter32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of calls rejected due to bandwidth being fully utilized at this zone access point by this ICP during the interval." ::= { mitelBWM24HrHistoryTableEntry 7 } mitelBWM24HrCACRejectionRatio OBJECT-TYPE SYNTAX MitelBWMPercentage MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ratio of mitelBWMCACRejections to the sum of mitelBWMCACRejections and mitelBWMCACAdmissions (i.e. rejections to all calls) expressed as a percentage." ::= { mitelBWM24HrHistoryTableEntry 8 } mitelBWM24HrAverageBandwidthUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average bandwidth in use at the zone access point by managed voice over IP media streams over the interval. Units in kilobits per second." ::= { mitelBWM24HrHistoryTableEntry 9 } mitelBWM24HrPeakBandwidthUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the peak bandwidth limit in use at the zone access point by managed voice over IP media streams during the interval. Units in kilobits per second." ::= { mitelBWM24HrHistoryTableEntry 10 } mitelBWM24HrAverageAvailable OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average bandwidth available at the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second." ::= { mitelBWM24HrHistoryTableEntry 11 } mitelBWM24HrFinalBandwidthLimit OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the configured bandwidth limit for the zone access point for managed voice over IP media streams recorded at the end of the interval. Units in kilobits per second." ::= { mitelBWM24HrHistoryTableEntry 12 } mitelBWM24HrPeakBandwidthRatio OBJECT-TYPE SYNTAX MitelBWMPercentage MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ratio of mitelBWMPeakBandwidthUsed to mitelBWMFinalBandwidthLimit expressed as a percentage." ::= { mitelBWM24HrHistoryTableEntry 13 } mitelBWM24HrPeakBwdthAboveLimit OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the difference between mitelBWMPeakBandwidthUsed and mitelBWMFinalBandwidthLimit if it was ever over the limit for the the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second." ::= { mitelBWM24HrHistoryTableEntry 14 } -- **************************************************************** -- MITEL Ipera 3000 BWM Compliances -- **************************************************************** mitelBWMGroups OBJECT-IDENTITY STATUS current DESCRIPTION "The group subtree. Leaves in this subtree identify object groupings used in the compliance statements." ::= { mitelBWMConformance 1 } mitelBWMCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "The compliance subtree. Leaves in this subtree are used for defining the ways in which an agent can claim compliance with this or other MITEL MIBs." ::= { mitelBWMConformance 2 } mitelBWMCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the Mitel Bandwidth Management MIB." MODULE -- this module MANDATORY-GROUPS { mitelBWMCurrentStatisticsGroup, mitelBWMCumulativeStatisticsGroup } GROUP mitelBWMHistoricalStatisticsGroup DESCRIPTION "This group is mandatory for agents implementing this MIB." ::= { mitelBWMCompliances 1 } mitelBWMCurrentStatisticsGroup OBJECT-GROUP OBJECTS { mitelBWMCurrentZoneID, mitelBWMCurrentParentZoneID, mitelBWMCurrentZAPID, mitelBWMCurrentZAPLabel, mitelBWMCurrentBandwidthInUse, mitelBWMCurrentBandwidthLimit, mitelBWMCurrentBandwidthRatio } STATUS current DESCRIPTION "A collection of objects providing current statistics pertaining to bandwidth management at zone access points managed by the ICP." ::= { mitelBWMGroups 1 } mitelBWMCumulativeStatisticsGroup OBJECT-GROUP OBJECTS { mitelBWMCumZoneID, mitelBWMCumParentZoneID, mitelBWMCumZAPID, mitelBWMCumZAPLabel, mitelBWMCumCACAdmissions, mitelBWMCumCACRejections, mitelBWMCumCACRejectionRatio } STATUS current DESCRIPTION "A collection of objects providing cumulative CAC statistics pertaining to bandwidth management at zone access points managed by the ICP." ::= { mitelBWMGroups 2 } mitelBWMHistoricalStatisticsGroup OBJECT-GROUP OBJECTS { mitelBWM15MinZoneID, mitelBWM15MinParentZoneID, mitelBWM15MinZAPID, mitelBWM15MinDateAndTime, mitelBWM15MinZAPLabel, mitelBWM15MinCACAdmissions, mitelBWM15MinCACRejections, mitelBWM15MinCACRejectionRatio, mitelBWM15MinAverageBandwidthUsed, mitelBWM15MinPeakBandwidthUsed, mitelBWM15MinAverageAvailable, mitelBWM15MinFinalBandwidthLimit, mitelBWM15MinPeakBandwidthRatio, mitelBWM15MinPeakBwdthAboveLimit, mitelBWM24HrZoneID, mitelBWM24HrParentZoneID, mitelBWM24HrZAPID, mitelBWM24HrDateAndTime, mitelBWM24HrZAPLabel, mitelBWM24HrCACAdmissions, mitelBWM24HrCACRejections, mitelBWM24HrCACRejectionRatio, mitelBWM24HrAverageBandwidthUsed, mitelBWM24HrPeakBandwidthUsed, mitelBWM24HrAverageAvailable, mitelBWM24HrFinalBandwidthLimit, mitelBWM24HrPeakBandwidthRatio, mitelBWM24HrPeakBwdthAboveLimit } STATUS current DESCRIPTION "A collection of objects providing historical CAC and bandwidth statistics pertaining to bandwidth management at zone access points managed by the ICP." ::= { mitelBWMGroups 3 } END