LUM-MPLSOAM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString, DateAndTime, RowStatus FROM SNMPv2-TC lumModules, lumMplsOamMIB FROM LUM-REG FaultStatus, MgmtNameString, CommandString FROM LUM-TC; lumMplsOamMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "MPLS OAM Management Information Base The tables contained in this MIB are: (1) Bidirectional forwarding table. BFD is a protocol intended to detect faults in the bidirectional path between two forwarding engines. It operates independently of media, data protocols, and routing protocols. (2) Template for bidirectional forwarding. Templates used for setting up a BFD sessions. " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201212251200Z" -- 25 December 2012 12:00:00 CET DESCRIPTION "Release r20: - Updated alarm descriptions for BFD." REVISION "201203011200Z" -- 1 March 2012 12:00:00 CET DESCRIPTION "Initial revision of the MIB Model of Bidirectional Forwarding (BFD) for MPLS-TP. Reference RFC5880, RFC6428." ::= { lumModules 44 } -- ---------------------------------------------------- -- Conformance area, containing groups and compliance -- specifications. -- ---------------------------------------------------- lumMplsOamConfs OBJECT IDENTIFIER ::= { lumMplsOamMIB 1 } lumMplsOamGroups OBJECT IDENTIFIER ::= { lumMplsOamConfs 1 } lumMplsOamCompl OBJECT IDENTIFIER ::= { lumMplsOamConfs 2 } -- ---------------------------------------------------- -- Root for objects in the MPLS OAM MIB -- ---------------------------------------------------- lumMplsOamMIBObjects OBJECT IDENTIFIER ::= { lumMplsOamMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- mplsOamGeneral OBJECT IDENTIFIER ::= { lumMplsOamMIBObjects 1 } mplsOamBfdSess OBJECT IDENTIFIER ::= { lumMplsOamMIBObjects 2 } mplsOamBfdTemplate OBJECT IDENTIFIER ::= { lumMplsOamMIBObjects 3 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- BfdSessStateTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BFD session state. State failing(5) is only applicable if corresponding session is running in BFD version 0." SYNTAX INTEGER { none(0), -- Added for remote state when not connected to a remote BFD session adminDown(1), down(2), init(3), up(4), failing(5) } BfdMultiplierTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The BFD failure detection multiplier. Number of failed/missed messages before an alarm." SYNTAX Unsigned32 (1..255) BfdIntervalTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The BFD interval in microseconds." SYNTAX Unsigned32 (0..1000000) BfdDiagTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A common BFD diagnostic code." SYNTAX INTEGER { noDiagnostic(0), controlDetectionTimeExpired(1), echoFunctionFailed(2), neighborSignaledSessionDown(3), forwardingPlaneReset(4), pathDown(5), concatenatedPathDown(6), administrativelyDown(7), reverseConcatenatedPathDown(8), misconnectionDefect(9) -- Added by RFC6428 } -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- mplsOamGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { mplsOamGeneral 1 } mplsOamGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { mplsOamGeneral 2 } mplsOamGeneralmplsOamBfdSessTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of BFD session table. " ::= { mplsOamGeneral 3 } mplsOamGeneralmplsOamBfdTemplateTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of BFD template table. " ::= { mplsOamGeneral 4 } -- ------------------------------------------------------ -- The BFD Session Table specifies BFD session specific -- ------------------------------------------------------ mplsOamBfdSessTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsOamBfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Table describes the BFD sessions." ::= { mplsOamBfdSess 1 } mplsOamBfdSessEntry OBJECT-TYPE SYNTAX MplsOamBfdSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD Session Entry describes a single BFD session. " INDEX { mplsOamBfdSessIndex } ::= { mplsOamBfdSessTable 1 } MplsOamBfdSessEntry ::= SEQUENCE { mplsOamBfdSessIndex Unsigned32, mplsOamBfdSessInternalReference Unsigned32, mplsOamBfdSessName MgmtNameString, mplsOamBfdSessAdminStatus INTEGER, mplsOamBfdSessState BfdSessStateTC, mplsOamBfdSessRemoteState BfdSessStateTC, mplsOamBfdSessDiag BfdDiagTC, mplsOamBfdSessRemoteDiag BfdDiagTC, mplsOamBfdSessNegotiatedTxInterval BfdIntervalTC, mplsOamBfdSessNegotiatedRxInterval BfdIntervalTC, mplsOamBfdSessMonitoringPath DisplayString, mplsOamBfdSessMonitoringPathType INTEGER, mplsOamBfdSessMonitoringPathIndex Unsigned32, mplsOamBfdSessTemplate DisplayString, mplsOamBfdSessTemplateIndex Unsigned32, mplsOamBfdSessSourceMepId DisplayString, mplsOamBfdSessTargetMepId DisplayString, mplsOamBfdSessRcvTargetMepId DisplayString, mplsOamBfdSessMepNotConfigured FaultStatus, mplsOamBfdSessLocalNotConnected FaultStatus, mplsOamBfdSessLocalMisConnectivity FaultStatus, mplsOamBfdSessLocalTimerExpired FaultStatus, mplsOamBfdSessRemoteMisConnectivity FaultStatus, mplsOamBfdSessRemoteTimerExpired FaultStatus, mplsOamBfdSessRemoteAdminDown FaultStatus, mplsOamBfdSessRowStatus RowStatus, mplsOamBfdSessDesiredMinTxInterval BfdIntervalTC, mplsOamBfdSessReqMinRxInterval BfdIntervalTC, mplsOamBfdSessTrafficClass Unsigned32} mplsOamBfdSessIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { mplsOamBfdSessEntry 1 } mplsOamBfdSessInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= { mplsOamBfdSessEntry 2 } mplsOamBfdSessName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the BFD session, for example 'bfdSess:1:2:myIdentifier', where the first number indicates subrack and the second slot number. For LSPs 'myIdentifier' is set to the LSP identifier. " ::= { mplsOamBfdSessEntry 3 } mplsOamBfdSessAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A transition from 'down' to 'up' will start the BFD state machine for the session. The state machine will have an initial state of down. A transition from 'up' to 'down' will cause the BFD session to be brought down to adminDown(1). " DEFVAL { 1 } ::= { mplsOamBfdSessEntry 4 } mplsOamBfdSessState OBJECT-TYPE SYNTAX BfdSessStateTC MAX-ACCESS read-only STATUS current DESCRIPTION "BFD session state. none - Locally indicated state of the remote BFD session before connection is made. adminDown - State the BFD session is in when the requested BFD administrative state is down. down - State of the BFD session during failure. init - State of the BFD session when trying to connect to remote BFD session. up - Working state of the BFD session. " ::= { mplsOamBfdSessEntry 5 } mplsOamBfdSessRemoteState OBJECT-TYPE SYNTAX BfdSessStateTC MAX-ACCESS read-only STATUS current DESCRIPTION "BFD session state. none - Locally indicated state of the remote BFD session before connection is made. adminDown - State the BFD session is in when the requested BFD administrative state is down. down - State of the BFD session during failure. init - State of the BFD session when trying to connect to remote BFD session. up - Working state of the BFD session. " ::= { mplsOamBfdSessEntry 6 } mplsOamBfdSessDiag OBJECT-TYPE SYNTAX BfdDiagTC MAX-ACCESS read-only STATUS current DESCRIPTION "A diagnostic code specifying the local systems reason for the last transition of the session from up to some other state. noDiagnostic - Normal state of session when no fault detected. controlDetectionTimeExpired - No continuity check messages received. Connection to remote BFD session broken. echoFunctionFailed - Not used neighborSignaledSessionDown - Remote BFD session is in state down forwardingPlaneReset - not used pathDown - not used concatenatedPathDown - not used administrativelyDown - BFD session is in administrative down state reverseConcatenatedPathDown - Not used misconnectionDefect - BFD session has detected a misconnectivity defect. MPLS-TP MEP IDs does not match between local and remote session. " ::= { mplsOamBfdSessEntry 7 } mplsOamBfdSessRemoteDiag OBJECT-TYPE SYNTAX BfdDiagTC MAX-ACCESS read-only STATUS current DESCRIPTION "A diagnostic code specifying the remote systems reason for the last transition of the session from up to some other state. noDiagnostic - Normal state of session when no fault detected. controlDetectionTimeExpired - No continuity check messages received. Connection to remote BFD session broken. echoFunctionFailed - Not used neighborSignaledSessionDown - Remote BFD session is in state down forwardingPlaneReset - not used pathDown - not used concatenatedPathDown - not used administrativelyDown - BFD session is in administrative down state reverseConcatenatedPathDown - Not used misconnectionDefect - BFD session has detected a misconnectivity defect. MPLS-TP MEP IDs does not match between local and remote session. " ::= { mplsOamBfdSessEntry 8 } mplsOamBfdSessNegotiatedTxInterval OBJECT-TYPE SYNTAX BfdIntervalTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the negotiated interval that the local system is transmitting BFD Control packets. Display unit is milliseconds but the storage type is microseconds. " ::= { mplsOamBfdSessEntry 9 } mplsOamBfdSessNegotiatedRxInterval OBJECT-TYPE SYNTAX BfdIntervalTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the negotiated interval that the local system is receiving BFD Control packets. Display unit is milliseconds but the storage type is microseconds. " ::= { mplsOamBfdSessEntry 10 } mplsOamBfdSessMonitoringPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the path the BFD object is monitoring. " DEFVAL { "" } ::= { mplsOamBfdSessEntry 11 } mplsOamBfdSessMonitoringPathType OBJECT-TYPE SYNTAX INTEGER { notSelected(0), -- no type selected lsp(1) -- mapping into LSPs in MPLS-TP } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of path being monitored by this BFD session entry, LSP, PW, or MEP. " DEFVAL { 1 } ::= { mplsOamBfdSessEntry 12 } mplsOamBfdSessMonitoringPathIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the path of the BFD object is monitoring. " ::= { mplsOamBfdSessEntry 13 } mplsOamBfdSessTemplate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "ID of the associated LSP that is active, if exists. " DEFVAL { "" } ::= { mplsOamBfdSessEntry 14 } mplsOamBfdSessTemplateIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the associated LSP that is active, if exists. " ::= { mplsOamBfdSessEntry 15 } mplsOamBfdSessSourceMepId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Actual configuration of source MEP ID for current BFD session received from traffic unit. The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]' " REFERENCE "MPLS-TP Identifiers [TPIDS]" ::= { mplsOamBfdSessEntry 16 } mplsOamBfdSessTargetMepId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Actual configuration of target MEP ID for current BFD session received from traffic unit. The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]' " REFERENCE "MPLS-TP Identifiers [TPIDS]" ::= { mplsOamBfdSessEntry 17 } mplsOamBfdSessRcvTargetMepId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Actual configuration of target MEP ID for current BFD session received from traffic unit of corresponding BFD session via CV packages.The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]' " REFERENCE "MPLS-TP Identifiers [TPIDS]" ::= { mplsOamBfdSessEntry 18 } mplsOamBfdSessMepNotConfigured OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "MEP-ID for tunnel, node or LSP are set to zero, source or remote. The CV messages will be transmitted but the connectivity verification will have degraded function. " ::= { mplsOamBfdSessEntry 19 } mplsOamBfdSessLocalNotConnected OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "No packages received from remote BFD session. " ::= { mplsOamBfdSessEntry 20 } mplsOamBfdSessLocalMisConnectivity OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid MEP-ID-TLV received by local session. MPLS-TP MEP-ID-TLV does from CV messages does not match local configuration. BFD session is connected to wrong peer BFD session or MEP IDs are not configured correctly. BFD session will display expected and actual values. Check configuration of MPLS-TP MEP ID for remote and peer end. Check MPLS-TP network set-up for misconfiguration. " ::= { mplsOamBfdSessEntry 21 } mplsOamBfdSessLocalTimerExpired OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Local BFD session has not received valid CC packages for an interval of more than detection multiplier times the negotiated RX interval. Check for layer 1 problems Check port settings Check MPLS-TP network set-up for misconfiguration. " ::= { mplsOamBfdSessEntry 22 } mplsOamBfdSessRemoteMisConnectivity OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The local BFD session has received an indication that the peer BFD session is in down state due to an invalid received MPLS-TP MEP-ID-TLV. Check local source and peer remote MEP-ID-TLV configuration. " ::= { mplsOamBfdSessEntry 23 } mplsOamBfdSessRemoteTimerExpired OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Remote time-out for CC packages. " ::= { mplsOamBfdSessEntry 24 } mplsOamBfdSessRemoteAdminDown OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The local BFD session has received an indication that the peer BFD session is in administrative down state. Check peer BFD session " ::= { mplsOamBfdSessEntry 25 } mplsOamBfdSessRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. " ::= { mplsOamBfdSessEntry 26 } mplsOamBfdSessDesiredMinTxInterval OBJECT-TYPE SYNTAX BfdIntervalTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used. Display unit is milliseconds but the storage type is microseconds. " DEFVAL { 100000 } ::= { mplsOamBfdSessEntry 27 } mplsOamBfdSessReqMinRxInterval OBJECT-TYPE SYNTAX BfdIntervalTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) is not supported. Display unit is milliseconds but the storage type is microseconds. " REFERENCE "RFC5880, Section 4.1" DEFVAL { 100000 } ::= { mplsOamBfdSessEntry 28 } mplsOamBfdSessTrafficClass OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " The entry signifies the Traffic Class used on the traffic generated by the BFD session CV and CC messages. " DEFVAL { 4 } ::= { mplsOamBfdSessEntry 29 } -- --------------------------------------------------------- -- The BFD Template Table common settings for BFD sessions -- --------------------------------------------------------- mplsOamBfdTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsOamBfdTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD template table describes the common templates for BFD sessions." ::= { mplsOamBfdTemplate 2 } mplsOamBfdTemplateEntry OBJECT-TYPE SYNTAX MplsOamBfdTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BFD template entry describes the common templates for BFD sessions. " INDEX { mplsOamBfdTemplateIndex } ::= { mplsOamBfdTemplateTable 1 } MplsOamBfdTemplateEntry ::= SEQUENCE { mplsOamBfdTemplateIndex Unsigned32, mplsOamBfdTemplateInternalReference Unsigned32, mplsOamBfdTemplateName MgmtNameString, mplsOamBfdTemplateIdentifier DisplayString, mplsOamBfdTemplateDesiredMinTxInterval BfdIntervalTC, mplsOamBfdTemplateDetectMult BfdMultiplierTC, mplsOamBfdTemplateReqMinRxInterval BfdIntervalTC, mplsOamBfdTemplateRowStatus RowStatus, mplsOamBfdTemplateCreateNewTemplate CommandString } mplsOamBfdTemplateIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { mplsOamBfdTemplateEntry 1 } mplsOamBfdTemplateInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= { mplsOamBfdTemplateEntry 2 } mplsOamBfdTemplateName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the BFD session, for example 'bfdSess:1:2:myIdentifier', where the first number indicates subrack and the second slot number. " ::= { mplsOamBfdTemplateEntry 3 } mplsOamBfdTemplateIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "A unique identifier for template object. " DEFVAL { "" } ::= { mplsOamBfdTemplateEntry 4 } mplsOamBfdTemplateDesiredMinTxInterval OBJECT-TYPE SYNTAX BfdIntervalTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used. Display unit is milliseconds but the storage type is microseconds. " DEFVAL { 100000 } ::= { mplsOamBfdTemplateEntry 5 } mplsOamBfdTemplateDetectMult OBJECT-TYPE SYNTAX BfdMultiplierTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the 'detect time' multiplier for raising an alarm. Number of loss BFD CC packets. This parameter is not configurable. " DEFVAL { 3 } ::= { mplsOamBfdTemplateEntry 6 } mplsOamBfdTemplateReqMinRxInterval OBJECT-TYPE SYNTAX BfdIntervalTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) is not supported. Display unit is milliseconds but the storage type is microseconds. " REFERENCE "RFC5880, Section 4.1" DEFVAL { 100000 } ::= { mplsOamBfdTemplateEntry 7 } mplsOamBfdTemplateCreateNewTemplate OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Internal command for creating a new BFD template. Identifier - The unique identifier for the template. Tx Interval - Minimum interval for sending BFD control packets. Configurable in intervals of 100 ms. Rx Interval - Minimum interval for receiving BFD control packets. Configurable in intervals of 100 ms. " ::= { mplsOamBfdTemplateEntry 8 } mplsOamBfdTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the mplsOamBfdTemplateRowStatus and mplsOamBfdTemplateStorageType. " ::= { mplsOamBfdTemplateEntry 9 } -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- mplsIOamGeneralGroupV1 OBJECT-GROUP OBJECTS { mplsOamGeneralLastChangeTime, mplsOamGeneralStateLastChangeTime, mplsOamGeneralmplsOamBfdSessTableSize} STATUS current DESCRIPTION "The general objects. " ::= { lumMplsOamGroups 1 } mplsBfdSessGroupV1 OBJECT-GROUP OBJECTS { mplsOamBfdSessIndex, mplsOamBfdSessInternalReference, mplsOamBfdSessName, mplsOamBfdSessAdminStatus, mplsOamBfdSessState, mplsOamBfdSessRemoteState, mplsOamBfdSessDiag, mplsOamBfdSessRemoteDiag, mplsOamBfdSessNegotiatedTxInterval, mplsOamBfdSessNegotiatedRxInterval, mplsOamBfdSessMonitoringPath, mplsOamBfdSessMonitoringPathType, mplsOamBfdSessMonitoringPathIndex, mplsOamBfdSessTemplate, mplsOamBfdSessTemplateIndex, mplsOamBfdSessSourceMepId, mplsOamBfdSessTargetMepId, mplsOamBfdSessRcvTargetMepId, mplsOamBfdSessMepNotConfigured, mplsOamBfdSessLocalNotConnected, mplsOamBfdSessLocalMisConnectivity, mplsOamBfdSessLocalTimerExpired, mplsOamBfdSessRemoteMisConnectivity, mplsOamBfdSessRemoteTimerExpired, mplsOamBfdSessRemoteAdminDown, mplsOamBfdSessRowStatus} STATUS deprecated DESCRIPTION "The MPLS OAM BFD Session objects (R19.0)." ::= { lumMplsOamGroups 2 } mplsBfdTemplateGroupV1 OBJECT-GROUP OBJECTS { mplsOamBfdTemplateIndex, mplsOamBfdTemplateInternalReference, mplsOamBfdTemplateName, mplsOamBfdTemplateIdentifier, mplsOamBfdTemplateDesiredMinTxInterval, mplsOamBfdTemplateDetectMult, mplsOamBfdTemplateReqMinRxInterval, mplsOamBfdTemplateCreateNewTemplate, mplsOamBfdTemplateRowStatus} STATUS current DESCRIPTION "The MPLS OAM BFD template objects (R19.0)." ::= { lumMplsOamGroups 3 } mplsBfdSessGroupV2 OBJECT-GROUP OBJECTS { mplsOamBfdSessIndex, mplsOamBfdSessInternalReference, mplsOamBfdSessName, mplsOamBfdSessAdminStatus, mplsOamBfdSessState, mplsOamBfdSessRemoteState, mplsOamBfdSessDiag, mplsOamBfdSessRemoteDiag, mplsOamBfdSessNegotiatedTxInterval, mplsOamBfdSessNegotiatedRxInterval, mplsOamBfdSessMonitoringPath, mplsOamBfdSessMonitoringPathType, mplsOamBfdSessMonitoringPathIndex, mplsOamBfdSessTemplate, mplsOamBfdSessTemplateIndex, mplsOamBfdSessSourceMepId, mplsOamBfdSessTargetMepId, mplsOamBfdSessRcvTargetMepId, mplsOamBfdSessMepNotConfigured, mplsOamBfdSessLocalNotConnected, mplsOamBfdSessLocalMisConnectivity, mplsOamBfdSessLocalTimerExpired, mplsOamBfdSessRemoteMisConnectivity, mplsOamBfdSessRemoteTimerExpired, mplsOamBfdSessRemoteAdminDown, mplsOamBfdSessRowStatus, mplsOamBfdSessDesiredMinTxInterval, mplsOamBfdSessReqMinRxInterval, mplsOamBfdSessTrafficClass} STATUS current DESCRIPTION "The MPLS OAM BFD Session objects (R20.0)." ::= { lumMplsOamGroups 4 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumMplsBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the MPLS OAM MIB. (R19)" MODULE MANDATORY-GROUPS { mplsIOamGeneralGroupV1, mplsBfdSessGroupV1, mplsBfdTemplateGroupV1} ::= { lumMplsOamCompl 1 } lumMplsBasicComplV2 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the MPLS OAM MIB. (R20)" MODULE MANDATORY-GROUPS { mplsIOamGeneralGroupV1, mplsBfdSessGroupV2, mplsBfdTemplateGroupV1} ::= { lumMplsOamCompl 2 } END