--**MOD+*********************************************************************** --* Module: ARUBAWIRED-CIPT-MIB.mib --* --* (c) Copyright 2020 Hewlett Packard Enterprise Development LP --* All Rights Reserved. --* --* The contents of this software are proprietary and confidential --* to the Hewlett-Packard Development Company, L.P. No part of this --* program may be photocopied, reproduced, or translated into another --* programming language without prior written consent of the --* Hewlett-Packard Development Company, L.P. --* --* Purpose: This file contains MIB definition of ARUBAWIRED-CIPT-MIB --* --**MOD-*********************************************************************** ARUBAWIRED-CIPT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI TruthValue, TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF VlanIndex FROM Q-BRIDGE-MIB wndFeatures FROM ARUBAWIRED-NETWORKING-OID InterfaceIndex FROM IF-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB; arubaWiredCiptMIB MODULE-IDENTITY LAST-UPDATED "202002070000Z" -- February 07, 2020 ORGANIZATION "HPE/Aruba Networking Division" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary client IP tracker MIBs." REVISION "202002070000Z" -- February 07, 2020 DESCRIPTION "Initial revision." ::= { wndFeatures 12 } -- ************************************************************* -- Textual Conventions -- ************************************************************* VidList ::= TEXTUAL-CONVENTION DISPLAY-HINT "512x" STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VlanIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VlanIndex values defined in the scope of IEEE 802.1Q." SYNTAX OCTET STRING (SIZE (512)) -- ************************************************************* -- Start of MIB Objects -- ************************************************************* arubaWiredCiptConfig OBJECT IDENTIFIER ::= { arubaWiredCiptMIB 1 } arubaWiredCiptClients OBJECT IDENTIFIER ::= { arubaWiredCiptMIB 2 } -- ************************************************************ -- CIPT global configuration -- ************************************************************ arubaWiredCiptGlobalConfig OBJECT IDENTIFIER ::= { arubaWiredCiptConfig 1 } arubaWiredCiptEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether client IP tracker is enabled or disabled. By default this object will have a value of false(2)." DEFVAL { false } ::= { arubaWiredCiptGlobalConfig 1 } arubaWiredCiptProbeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable client IP tracker probing to update client IP." DEFVAL { true } ::= { arubaWiredCiptGlobalConfig 2 } -- ************************************************************ -- CIPT VLAN configuration -- ************************************************************ arubaWiredCiptVlanConfig OBJECT IDENTIFIER ::= { arubaWiredCiptConfig 2 } arubaWiredCiptVidList OBJECT-TYPE SYNTAX VidList MAX-ACCESS read-write STATUS current DESCRIPTION "A list of VLANs on which client IP tracker is enabled." ::= { arubaWiredCiptVlanConfig 1 } -- ************************************************************ -- CIPT PORT configuration -- ************************************************************ arubaWiredCiptPortConfig OBJECT IDENTIFIER ::= { arubaWiredCiptConfig 3 } arubaWiredCiptPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ArubaWiredCiptPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per-port configuration of Client IP tracker." ::= { arubaWiredCiptPortConfig 1 } arubaWiredCiptPortEntry OBJECT-TYPE SYNTAX ArubaWiredCiptPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client IP tracker configuration information for a single port." INDEX { arubaWiredCiptPortIfIndex } ::= { arubaWiredCiptPortTable 1 } ArubaWiredCiptPortEntry ::= SEQUENCE { arubaWiredCiptPortIfIndex InterfaceIndex, arubaWiredCiptPortEnable INTEGER, arubaWiredCiptPortUpdateInterval Unsigned32, arubaWiredCiptPortClientLimit Unsigned32 } arubaWiredCiptPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the port on which the client IP tracker entry is enabled. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { arubaWiredCiptPortEntry 1 } arubaWiredCiptPortEnable OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), auto (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether client IP tracker is enabled on a port or not . The default value is auto(2)" DEFVAL { 2 } ::= { arubaWiredCiptPortEntry 2 } arubaWiredCiptPortUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 (60..28800) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in seconds at which client IP is refreshed. The default value is 1800 seconds." ::= { arubaWiredCiptPortEntry 3 } arubaWiredCiptPortClientLimit OBJECT-TYPE SYNTAX Unsigned32 (1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of clients which can be tracked on this port. 6100 max clients - 128 6200, 6300 max clients - 2048 6400 max client - 4096" ::= { arubaWiredCiptPortEntry 4 } -- ************************************************************ -- CIPT Tracked client details -- ************************************************************ arubaWiredCiptTrackedClients OBJECT IDENTIFIER ::= { arubaWiredCiptClients 1 } arubaWiredCiptClientTable OBJECT-TYPE SYNTAX SEQUENCE OF ArubaWiredCiptClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client IP tracker learnt IP addresses for a client MAC." ::= { arubaWiredCiptTrackedClients 1 } arubaWiredCiptClientEntry OBJECT-TYPE SYNTAX ArubaWiredCiptClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Learnt IP address of a client MAC on a port." INDEX { arubaWiredCiptClientMacAddress, arubaWiredCiptClientVlanId, arubaWiredCiptClientIpIndex } ::= { arubaWiredCiptClientTable 1 } ArubaWiredCiptClientEntry ::= SEQUENCE { arubaWiredCiptClientMacAddress MacAddress, arubaWiredCiptClientVlanId VlanIndex, arubaWiredCiptClientIpIndex Unsigned32, arubaWiredCiptClientIpAddrType InetAddressType, arubaWiredCiptClientIpAddress InetAddress, arubaWiredCiptClientPortIfIndex InterfaceIndex } arubaWiredCiptClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the client whose IP is being tracked." ::= { arubaWiredCiptClientEntry 1 } arubaWiredCiptClientVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN on which the client IP is being tracked." ::= { arubaWiredCiptClientEntry 2 } arubaWiredCiptClientIpIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of IP when a client being tracked has multiple IP addresses." ::= { arubaWiredCiptClientEntry 3 } arubaWiredCiptClientIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the InetAddress variables in this table." ::= { arubaWiredCiptClientEntry 4 } arubaWiredCiptClientIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Tracked IP address of the client." ::= { arubaWiredCiptClientEntry 5 } arubaWiredCiptClientPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "IfIndex of the port on which client IP address is being tracked." ::= { arubaWiredCiptClientEntry 6 } -- ********************************************************************** -- CIPT Conformance information -- ********************************************************************** arubaWiredCiptConformance OBJECT IDENTIFIER ::= { arubaWiredCiptMIB 3 } arubaWiredCiptGroups OBJECT IDENTIFIER ::= { arubaWiredCiptConformance 1 } arubaWiredCiptCompliances OBJECT IDENTIFIER ::= { arubaWiredCiptConformance 2 } arubaWiredCiptConfigGlobalGroup OBJECT-GROUP OBJECTS { arubaWiredCiptEnable, arubaWiredCiptProbeEnable } STATUS current DESCRIPTION "A collection of objects providing global configuration of client IP tracker." ::= {arubaWiredCiptGroups 1 } arubaWiredCiptVlanConfigGroup OBJECT-GROUP OBJECTS { arubaWiredCiptVidList } STATUS current DESCRIPTION "A collection of objects providing per VLAN configuration of client IP tracker." ::= {arubaWiredCiptGroups 2 } arubaWiredCiptPortConfigGroup OBJECT-GROUP OBJECTS { arubaWiredCiptPortEnable, arubaWiredCiptPortUpdateInterval, arubaWiredCiptPortClientLimit } STATUS current DESCRIPTION "A collection of objects providing per port configuration of client IP tracker." ::= {arubaWiredCiptGroups 3 } arubaWiredCiptTrackedClientsGroup OBJECT-GROUP OBJECTS { arubaWiredCiptClientIpAddrType, arubaWiredCiptClientIpAddress, arubaWiredCiptClientPortIfIndex } STATUS current DESCRIPTION "A collection of objects providing details of client whose IP address is being tracked." ::= {arubaWiredCiptGroups 4 } arubaWiredCiptCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches with support for arubaWired client IP tracker objects." MODULE MANDATORY-GROUPS { arubaWiredCiptConfigGlobalGroup, arubaWiredCiptVlanConfigGroup, arubaWiredCiptPortConfigGroup, arubaWiredCiptTrackedClientsGroup} ::= { arubaWiredCiptCompliances 1 } END