--MibName=raisecomMpls -- ***************************************************************** -- RAISECOM-MPLS-MIB.mib: MPLS MIB -- -- Feb 2009, tangyoucan -- -- Copyright (c) 1996-2009 by Raisecom Technology Co., Ltd. -- All rights reserved. -- -- ***************************************************************** -- RAISECOM-MPLS-MIB DEFINITIONS ::= BEGIN IMPORTS -- NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, -- Integer32, Unsigned32 -- FROM SNMPv2-SMI [RFC2578] ifIndex FROM IF-MIB --MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP --FROM SNMPv2-CONF [RFC2580] TEXTUAL-CONVENTION,TruthValue, RowStatus FROM SNMPv2-TC -- [RFC2579] InterfaceIndexOrZero FROM IF-MIB -- [RFC2863] InetAddressIPv4, InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- [RFC4001] pwEntry FROM PW-STD-MIB -- [RFC5601] mplsXCEntry FROM MPLS-LSR-STD-MIB -- [RFC3813] raisecomAgent FROM RAISECOM-BASE-MIB ; raisecomMpls MODULE-IDENTITY LAST-UPDATED "201103120000Z" -- 12 March 2011 00:00:00 GMT ORGANIZATION "Raisecom Technology Co., Ltd." CONTACT-INFO "Raisecom Science & Technology Co., ltd. E-mail: support@raisecom.com ." DESCRIPTION "This MIB module contains managed object definitions for MPLS. " ::= { raisecomAgent 25 } -- Top-level components of this MIB. raisecomMplsLsrObjects OBJECT IDENTIFIER ::= { raisecomMpls 1 } raisecomMplsVpnObjects OBJECT IDENTIFIER ::= { raisecomMpls 2 } raisecomMplsLdpObjects OBJECT IDENTIFIER ::= { raisecomMpls 3 } raisecomMplsRsvpTEObjects OBJECT IDENTIFIER ::= { raisecomMpls 4 } RefreshInterval ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The number of milliseconds that are expected to elapse between refreshes of path or reserva- tion state. Unrefreshed Path or reservation state is removed after a small multiple of this period." SYNTAX INTEGER (0..'7FFFFFFF'h) -- end Top-level components of this MIB --Second-level componets of this MIB. raisecomMplsL2VpnObjects OBJECT IDENTIFIER ::= { raisecomMplsVpnObjects 1 } -- end Second-level components of this MIB --start of config enable information raisecomMplsLsrId OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS LSR ID." ::= { raisecomMplsLsrObjects 1 } raisecomMplsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS enable." DEFVAL { false } ::= { raisecomMplsLsrObjects 2 } raisecomMplsLspStatisticsClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS LSR Lsp statistics clear." DEFVAL { false } ::= { raisecomMplsLsrObjects 3 } --end of config enable information --start of interface config raisecomMplsInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMplsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring the interface mpls information." ::= { raisecomMplsLsrObjects 4 } raisecomMplsInterfaceEntry OBJECT-TYPE SYNTAX RaisecomMplsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the MPLS status information of this interface." INDEX { raisecomMplsInterfaceIndex } ::= { raisecomMplsInterfaceTable 1 } RaisecomMplsInterfaceEntry ::= SEQUENCE { raisecomMplsInterfaceIndex InterfaceIndexOrZero, raisecomMplsInterfaceEnable TruthValue } raisecomMplsInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS LSR interface entry interface index." ::= { raisecomMplsInterfaceEntry 1 } raisecomMplsInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS interface entry mpls enable." DEFVAL { true } ::= { raisecomMplsInterfaceEntry 2 } --end of interface config --start of config LSP name raisecomMplsLspTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMplsLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring the LSP name." ::= { raisecomMplsLsrObjects 5 } raisecomMplsLspEntry OBJECT-TYPE SYNTAX RaisecomMplsLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS LSP entry, for manual LSP create. " AUGMENTS { mplsXCEntry } ::= { raisecomMplsLspTable 1 } RaisecomMplsLspEntry ::= SEQUENCE { raisecomMplsLspName OCTET STRING } raisecomMplsLspName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS LSP name. Static lsp identifiered by it." ::= { raisecomMplsLspEntry 1 } --end of LSP name -- Start of MPSL LSP Statistics. raisecomMplsLspStatisticsObjects OBJECT IDENTIFIER ::= { raisecomMplsLsrObjects 6 } raisecomMplsLspConfigured OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSPs configured on this device." ::= { raisecomMplsLspStatisticsObjects 1 } raisecomMplsLspActicve OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active LSPs configured on this device." ::= { raisecomMplsLspStatisticsObjects 2 } raisecomMplsLspInActicve OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inactive LSPs configured on this device." ::= { raisecomMplsLspStatisticsObjects 3 } raisecomMplsLspIngress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ingress LSPs configured on this device." ::= { raisecomMplsLspStatisticsObjects 4 } raisecomMplsLspTransit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transit LSPs configured on this device." ::= { raisecomMplsLspStatisticsObjects 5 } raisecomMplsLspEgress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus is active(1)." ::= { raisecomMplsLspStatisticsObjects 6 } raisecomMplsLspStatic OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSPs configured by SNMP." ::= { raisecomMplsLspStatisticsObjects 7 } raisecomMplsLspLdp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSPs configured by LDP." ::= { raisecomMplsLspStatisticsObjects 8 } raisecomMplsLspRsvpTe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSPs configured by RSVP-TE." ::= { raisecomMplsLspStatisticsObjects 9 } --end of MPLS LSP Statistics --start of MPLS TE Notifications raisecomMplsTunnelReroutedNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsTunnelRerouted traps, otherwise these traps are not emitted." DEFVAL { false } ::= { raisecomMplsLsrObjects 7 } raisecomMplsTunnelReoptimizedNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsTunnelReoptimized traps, otherwise these traps are not emitted." DEFVAL { false } ::= { raisecomMplsLsrObjects 8 } raisecomMplsTtlPublicPropagate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the TTL propagate for public packet." DEFVAL { true } ::= { raisecomMplsLsrObjects 9 } raisecomMplsTtlVpnPropagate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the TTL propagate for vpn packet." DEFVAL { false } ::= { raisecomMplsLsrObjects 10 } --end of MPLS TE Notifications --begin vpn raisecomMplsL2vpnEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS L2VPN enable." DEFVAL { false } ::= { raisecomMplsL2VpnObjects 1 } raisecomMplsL2vpnMartiniEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS L2VPN martini enable." DEFVAL { false } ::= { raisecomMplsL2VpnObjects 2 } raisecomMplsL2vpnInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMplsL2vpnInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring the interface mpls l2 vpn information." ::= { raisecomMplsL2VpnObjects 3} raisecomMplsL2vpnInterfaceEntry OBJECT-TYPE SYNTAX RaisecomMplsL2vpnInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the MPLS status information of this interface." INDEX { raisecomMplsL2vpnInterfaceIndex } ::= { raisecomMplsL2vpnInterfaceTable 1 } RaisecomMplsL2vpnInterfaceEntry ::= SEQUENCE { raisecomMplsL2vpnInterfaceIndex InterfaceIndexOrZero, raisecomMplsL2vpnInterfaceEnable TruthValue } raisecomMplsL2vpnInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS interface entry interface index." ::= { raisecomMplsL2vpnInterfaceEntry 1 } raisecomMplsL2vpnInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS interface entry l2vpn enable." DEFVAL { true } ::= { raisecomMplsL2vpnInterfaceEntry 2 } --end of interface config --start of ccc pw raisecomMplsCccPwTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMplsCccPwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies additional information for ccc PW." ::= { raisecomMplsL2VpnObjects 4 } raisecomMplsCccPwEntry OBJECT-TYPE SYNTAX RaisecomMplsCccPwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ccc PW entry, add next hop information ccc connectiong. " AUGMENTS { pwEntry } ::= { raisecomMplsCccPwTable 1 } RaisecomMplsCccPwEntry ::= SEQUENCE { raisecomMplsCccNexthopType InetAddressType, raisecomMplsCccNexthop InetAddress } raisecomMplsCccNexthopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "ccc VPN next hop type. it is used only in ccc(pwonly type pw). " ::= { raisecomMplsCccPwEntry 1 } raisecomMplsCccNexthop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "ccc VPN next hop address. it is used only in ccc(pwonly type pw). " ::= { raisecomMplsCccPwEntry 2 } --end of ccc pw --end vpn --begin ldp raisecomMplsLdpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS ldp enable." DEFVAL { false } ::= { raisecomMplsLdpObjects 1 } raisecomMplsLdpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMplsLdpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring the interface mpls information." ::= { raisecomMplsLdpObjects 2 } raisecomMplsLdpInterfaceEntry OBJECT-TYPE SYNTAX RaisecomMplsLdpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the MPLS status information of this interface." INDEX { raisecomMplsLdpInterfaceIndex } ::= { raisecomMplsLdpInterfaceTable 1 } RaisecomMplsLdpInterfaceEntry ::= SEQUENCE { raisecomMplsLdpInterfaceIndex InterfaceIndexOrZero, raisecomMplsLdpInterfaceEnable TruthValue, raisecomMplsLdpInterfaceLAM INTEGER, raisecomMplsLdpInterfaceTransportAddress InetAddress, raisecomMplsLdpInterfaceLdpID OCTET STRING, raisecomMplsLdpInterfaceMTU INTEGER, raisecomMplsLdpInterfaceKeepAliveHoldTimer INTEGER, raisecomMplsLdpInterfaceHelloHoldTimer INTEGER } raisecomMplsLdpInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS ldp interface entry interface index." ::= { raisecomMplsLdpInterfaceEntry 1 } raisecomMplsLdpInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS ldp interface entry ldp enable." DEFVAL { true } ::= { raisecomMplsLdpInterfaceEntry 2 } raisecomMplsLdpInterfaceLAM OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "For any given LDP session, the method of label advertisement must be specified." ::= { raisecomMplsLdpInterfaceEntry 3 } raisecomMplsLdpInterfaceTransportAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MPLS ldp interface entry ldp enable." ::= { raisecomMplsLdpInterfaceEntry 4 } raisecomMplsLdpInterfaceLdpID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The LDP identifier." ::= { raisecomMplsLdpInterfaceEntry 5 } raisecomMplsLdpInterfaceMTU OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum transfer units." DEFVAL { 1500 } ::= { raisecomMplsLdpInterfaceEntry 6 } raisecomMplsLdpInterfaceKeepAliveHoldTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity." DEFVAL { 40 } ::= { raisecomMplsLdpInterfaceEntry 7 } raisecomMplsLdpInterfaceHelloHoldTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received from potential peers. This object represents the Hold Time in the Common Hello Parameters TLV of the Hello Message. A value of 0 is a default value and should be interpretted in conjunction with the mplsLdpEntityTargetPeer object. If the value of this object is 0: if the value of the mplsLdpEntityTargetPeer object is false(2), then this specifies that the Hold Time's actual default value is 15 seconds (i.e., the default Hold time for Link Hellos is 15 seconds). Otherwise if the value of the mplsLdpEntityTargetPeer object is true(1), then this specifies that the Hold Time's actual default value is 45 seconds (i.e., the default Hold time for Targeted Hellos is 45 seconds). A value of 65535 means infinite (i.e., wait forever). All other values represent the amount of time in seconds to wait for a Hello Message. Setting the hold time to a value smaller than 15 is not recommended, although not forbidden according to RFC3036." DEFVAL { 0 } ::= { raisecomMplsLdpInterfaceEntry 8 } raisecomMplsLdpSessionStatusTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsLdpSessionUp and mplsLdpSessionDown traps, otherwise these traps are not generated." DEFVAL { false } ::= { raisecomMplsLdpObjects 3 } raisecomMplsLdpPathVecLimitTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsLdpPathVectorLimitMismatch traps, otherwise these traps are not generated." DEFVAL { false } ::= { raisecomMplsLdpObjects 4 } raisecomMplsLdpSessionThreshTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsLdpInitSessionThresholdExceeded traps, otherwise these traps are not generated." DEFVAL { false } ::= { raisecomMplsLdpObjects 5 } --end of interface config --end ldp --begin rsvp-te raisecomMplsRsvpTEEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS rsvp enable." DEFVAL { false } ::= { raisecomMplsRsvpTEObjects 1 } raisecomMplsRsvpTERefreshInterval OBJECT-TYPE SYNTAX RefreshInterval MAX-ACCESS read-write STATUS current DESCRIPTION "The interval which is used to set the average interval between refresh path and resv messages. Note:This is rsvp-te global configuration." DEFVAL { 3000 } ::= { raisecomMplsRsvpTEObjects 2 } raisecomMplsRsvpTERefreshMultiple OBJECT-TYPE SYNTAX INTEGER (1..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "The RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have. Note:This is rsvp-te global configuration." DEFVAL { 3 } ::= { raisecomMplsRsvpTEObjects 3 } raisecomMplsRsvpTERefreshBlockadeMultiple OBJECT-TYPE SYNTAX INTEGER (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "The RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted. Note:This is rsvp-te global configuration." DEFVAL { 0 } ::= { raisecomMplsRsvpTEObjects 4 } raisecomMplsRsvpTELSPSetupPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically more or equal (so lower or equal priority) than the value of the holding priority object. Note:This is rsvp-te global configuration." DEFVAL { 4 } ::= { raisecomMplsRsvpTEObjects 5 } raisecomMplsRsvpTELSPHoldingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less or equal (so higher or equal priority) than the value of the holding priority object. Note:This is rsvp-te global configuration." DEFVAL { 3 } ::= { raisecomMplsRsvpTEObjects 6 } raisecomMplsRsvpTEInitPathRRInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The rapid retransmission interval in milliseconds before an Initial Path message is first resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refresh message which requires re-routing. Note:This is rsvp-te global configuration." DEFVAL { 2000 } ::= { raisecomMplsRsvpTEObjects 7 } raisecomMplsRsvpTEInitPathRRDecay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Initial Path message. A value of 0 indicates a constant retransmission rate. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refresh message which requires re-routing. Note:This is rsvp-te global configuration." DEFVAL { 100 } ::= { raisecomMplsRsvpTEObjects 8 } raisecomMplsRsvpTEInitPathRRLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of times an Initial Path message is resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refresh message which requires re-routing. Note:This is rsvp-te global configuration." DEFVAL { 2 } ::= { raisecomMplsRsvpTEObjects 9 } ------Begin of raisecomMplsRsvpTEInterfaceTable------ raisecomMplsRsvpTEInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMplsRsvpTEInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSVP-specific attributes of the system's interfaces." ::= { raisecomMplsRsvpTEObjects 10} raisecomMplsRsvpTEInterfaceEntry OBJECT-TYPE SYNTAX RaisecomMplsRsvpTEInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSVP-specific attributes of the a given interface" INDEX { ifIndex } ::= { raisecomMplsRsvpTEInterfaceTable 1 } RaisecomMplsRsvpTEInterfaceEntry ::= SEQUENCE { raisecomMplsRsvpTEIfRefreshInterval RefreshInterval, raisecomMplsRsvpTEIfRefreshMultiple INTEGER, raisecomMplsRsvpTEIfBlockadeMultiple INTEGER, raisecomMplsRsvpTEIfRRInterval Unsigned32, raisecomMplsRsvpTEIfRRDecay Integer32, raisecomMplsRsvpTEIfRRLimit Unsigned32, raisecomMplsRsvpTEIfHelloPeriod Unsigned32, raisecomMplsRsvpTEIfHelloHoldPeriod Unsigned32, raisecomMplsRsvpTEIfHelloDecay Unsigned32, raisecomMplsRsvpTEIfHelloPersist Unsigned32, raisecomMplsRsvpTEIfEnabled TruthValue, raisecomMplsRsvpTEIfStatus RowStatus } raisecomMplsRsvpTEIfRefreshInterval OBJECT-TYPE SYNTAX RefreshInterval UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The average interval, in milliseconds, between Path and Resv refresh messages for LSPs which use this interface for RSVP-TE-signalled data. Note:A value of 0 indicates that the globally configured value are used on an interface.A value of -1 indicates that Path and Resv refresh messages are not required on this interface" DEFVAL { 0 } ::= { raisecomMplsRsvpTEInterfaceEntry 1} raisecomMplsRsvpTEIfRefreshMultiple OBJECT-TYPE SYNTAX INTEGER (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out. Note:A value of 0 indicates that the globally configuredvalue are used on an interface" DEFVAL { 0 } ::= { raisecomMplsRsvpTEInterfaceEntry 2 } raisecomMplsRsvpTEIfBlockadeMultiple OBJECT-TYPE SYNTAX INTEGER (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered. Note:A value of 0 indicates that the globally are used on an interface" DEFVAL { 0 } ::= { raisecomMplsRsvpTEInterfaceEntry 3 } raisecomMplsRsvpTEIfRRInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Rapid Retry Interval (in milliseconds) that should be used on all interfaces." DEFVAL { 500 } ::= { raisecomMplsRsvpTEInterfaceEntry 4 } raisecomMplsRsvpTEIfRRDecay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP message sent out of this interface. A value of 0 indicates a constant retransmission rate." DEFVAL { 100 } ::= { raisecomMplsRsvpTEInterfaceEntry 5 } raisecomMplsRsvpTEIfRRLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of times a message is resent if no acknowledgement is received on this interface." DEFVAL { 2 } ::= { raisecomMplsRsvpTEInterfaceEntry 6 } raisecomMplsRsvpTEIfHelloPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Default period in milliseconds between sending Hello messages to all neighbors on this interface. If this is set to 0, no Hello messages are sent by this interface. Note:This is configured on an interface" DEFVAL { 0 } ::= { raisecomMplsRsvpTEInterfaceEntry 7 } raisecomMplsRsvpTEIfHelloHoldPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of hello periods which may pass without receiving a successful Hello message from a partner before the Hello session times out. Note:This is configured on an interface" DEFVAL { 3 } ::= { raisecomMplsRsvpTEInterfaceEntry 8 } raisecomMplsRsvpTEIfHelloDecay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Percentage increase in hello period after each Hello message sent when the hello session with the neighbor has timed out. Note:This is configured on an interface" DEFVAL { 0 } ::= { raisecomMplsRsvpTEInterfaceEntry 9 } raisecomMplsRsvpTEIfHelloPersist OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of hello periods which may pass after the Hello session times out before Hello messages cease. Note:This is configured on an interface" ::= { raisecomMplsRsvpTEInterfaceEntry 10 } raisecomMplsRsvpTEIfEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If TRUE, RSVP-TE is enabled on this Interface. If FALSE, RSVP-TE is not enabled on this inter- face." ::= { raisecomMplsRsvpTEInterfaceEntry 11 } raisecomMplsRsvpTEIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "'active' on interfaces that are configured for RSVP." ::= { raisecomMplsRsvpTEInterfaceEntry 12 } --end rsvp END