RAD-ds1Interface-MIB DEFINITIONS ::= BEGIN -- It is RAD's intent to encourage the widespread use of -- this Specification in connection with the management of -- RAD products. RAD grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of RAD products. -- This Specification is supplied "as is," and RAD makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. IMPORTS dsx1LineStatus, dsx1CurrentIndex, dsx1LineIndex, dsx1IntervalIndex, dsx1IntervalNumber, dsx1LoopbackStatus, dsx1TotalIndex, dsx1IntervalLESs, dsx1IntervalPCVs, dsx1IntervalESs, dsx1IntervalSESs, dsx1IntervalSEFSs, dsx1IntervalCSSs, dsx1IntervalUASs FROM DS1-MIB InterfaceIndex, ifAlias FROM IF-MIB PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB Integer32, Counter32, Gauge32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC diverseIfWanGen FROM RAD-SMI-MIB DayType FROM RAD-TC alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason FROM RAD-GEN-MIB; ds1Interface MODULE-IDENTITY LAST-UPDATED "201604211804Z" -- April 21, 2016 ORGANIZATION "RAD Data Communications Ltd." CONTACT-INFO "System Department Email: mibs@rad.com Postal: RAD Data Communications Ltd. 24 Raoul Wallenberg St. Tel-Aviv 6971920 Israel Phone: +972-3-645-5421 Fax: +972-3-760-7844" DESCRIPTION "DS1 MIB." ::= { diverseIfWanGen 4 } -- MIB is changed due to complilation problems: -- As variable in the same name exists in DS1-MIB, dsx1LineMode is renamed to dsx1LineModeR. prtDS1Events OBJECT IDENTIFIER ::= {ds1Interface 0} prtDs1PerfHistory OBJECT IDENTIFIER ::= {ds1Interface 1} -- Extension to the dsx1 current table dsx1XCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1XCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of current statistics entries. This table contains additional objects for the current table." ::= { prtDs1PerfHistory 2 } dsx1XCurrentEntry OBJECT-TYPE SYNTAX Dsx1XCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional statistical counters applicable to a particular current table." -- AUGMENTS { dsx1CurrentEntry } INDEX { dsx1CurrentIndex } ::= { dsx1XCurrentTable 1 } Dsx1XCurrentEntry ::= SEQUENCE { dsx1CurrentLOS PerfCurrentCount, dsx1CurrentLOF PerfCurrentCount, dsx1CurrentLOC PerfCurrentCount, dsx1CurrentAIS PerfCurrentCount, dsx1CurrentRAI PerfCurrentCount, dsx1CurrentLOMF PerfCurrentCount, dsx1CurrentFEBE PerfCurrentCount, dsx1CurrentStatus OCTET STRING, dsx1CurrentBPV PerfCurrentCount, dsx1CurrentLOCRCMF PerfCurrentCount, dsx1CurrentLOFC PerfCurrentCount, dsx1CurrentCRCErrors PerfCurrentCount, dsx1CurrentLSES PerfCurrentCount, dsx1CurrentFC PerfCurrentCount } dsx1CurrentLOS OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval." ::= { dsx1XCurrentEntry 1 } dsx1CurrentLOF OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval." ::= { dsx1XCurrentEntry 2 } dsx1CurrentLOC OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation ." ::= { dsx1XCurrentEntry 3 } dsx1CurrentAIS OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval." ::= { dsx1XCurrentEntry 4 } dsx1CurrentRAI OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss of frame." ::= { dsx1XCurrentEntry 5 } dsx1CurrentLOMF OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of Multi-Frame sequence in E1 time slot 16." ::= { dsx1XCurrentEntry 6 } dsx1CurrentFEBE OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval." ::= { dsx1XCurrentEntry 7 } dsx1CurrentStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out." ::= { dsx1XCurrentEntry 8 } dsx1CurrentBPV OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval." ::= { dsx1XCurrentEntry 9 } dsx1CurrentLOCRCMF OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of CRC4 Multi-Frame sequence in E1. encountered in the current 15 minute interval" ::= { dsx1XCurrentEntry 10 } dsx1CurrentLOFC OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of loss of frame events measured. encountered in the current 15 minute interval" ::= { dsx1XCurrentEntry 11 } dsx1CurrentCRCErrors OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of CRC error events, encountered in the current 15 minute interval." ::= { dsx1XCurrentEntry 12 } dsx1CurrentLSES OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of LSES (Line Severely Errored Seconds) encountered in the current 15 minute interval." ::= { dsx1XCurrentEntry 13 } dsx1CurrentFC OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of FC (Path failure events) encountered in the current 15 minute interval." ::= { dsx1XCurrentEntry 14 } -- Interval table is deprecated, see dsx1IntervalNumTable dsx1XIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1XIntervalEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Interval entries. This table contains additional objects for the interval table." ::= { prtDs1PerfHistory 3 } dsx1XIntervalEntry OBJECT-TYPE SYNTAX Dsx1XIntervalEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry containing additional statistical counters applicable to a particular interval table." -- AUGMENTS { dsx1IntervalEntry } INDEX { dsx1IntervalIndex, dsx1IntervalNumber } ::= { dsx1XIntervalTable 1 } Dsx1XIntervalEntry ::= SEQUENCE { dsx1IntervalLOS PerfIntervalCount, dsx1IntervalLOF PerfIntervalCount, dsx1IntervalLOC PerfIntervalCount, dsx1IntervalAIS PerfIntervalCount, dsx1IntervalRAI PerfIntervalCount, dsx1IntervalLOMF PerfIntervalCount, dsx1IntervalFEBE PerfIntervalCount, dsx1IntervalStatus OCTET STRING, dsx1IntervalBPV PerfIntervalCount, dsx1IntervalLOCRCMF PerfIntervalCount, dsx1IntervalLOFC PerfIntervalCount, dsx1IntervalLSES PerfIntervalCount, dsx1IntervalFC PerfIntervalCount } dsx1IntervalLOS OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1XIntervalEntry 1 } dsx1IntervalLOF OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1XIntervalEntry 2 } dsx1IntervalLOC OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation ." ::= { dsx1XIntervalEntry 3 } dsx1IntervalAIS OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1XIntervalEntry 4 } dsx1IntervalRAI OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss of frame." ::= { dsx1XIntervalEntry 5 } dsx1IntervalLOMF OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of Multi-Frame sequence in E1 time slot 16." ::= { dsx1XIntervalEntry 6 } dsx1IntervalFEBE OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute intervals." ::= { dsx1XIntervalEntry 7 } dsx1IntervalStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out." ::= { dsx1XIntervalEntry 8 } dsx1IntervalBPV OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1XIntervalEntry 9 } dsx1IntervalLOCRCMF OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of CRC4 Multi-Frame sequence in E1." ::= { dsx1XIntervalEntry 10 } dsx1IntervalLOFC OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals." ::= { dsx1XIntervalEntry 11 } dsx1IntervalLSES OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Counts the number of LSES (Line Severely Errored Seconds) encountered in the 15 minute interval." ::= { dsx1XIntervalEntry 13 } dsx1IntervalFC OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Counts the number of FC (Path failure events) encountered in the 15 minute interval." ::= { dsx1XIntervalEntry 14 } -- Extension to the dsx1 Total table dsx1XTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1XTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Total statistics entries. This table contains additional objects for the Total table." ::= { prtDs1PerfHistory 4 } dsx1XTotalEntry OBJECT-TYPE SYNTAX Dsx1XTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional statistical counters applicable to a particular total table." -- AUGMENTS { dsx1TotalEntry } INDEX { dsx1TotalIndex } ::= { dsx1XTotalTable 1 } Dsx1XTotalEntry ::= SEQUENCE { dsx1TotalLOS PerfTotalCount, dsx1TotalLOF PerfTotalCount, dsx1TotalAIS PerfTotalCount, dsx1TotalRAI PerfTotalCount, dsx1TotalBPV PerfTotalCount, dsx1TotalLOFC PerfTotalCount, dsx1TotalLSES PerfTotalCount, dsx1TotalFC PerfTotalCount } dsx1TotalLOS OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of LOS (Loss of Signal) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 1 } dsx1TotalLOF OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of LOF (Loss of Frame) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 2 } dsx1TotalAIS OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of AIS (Alarm Indication Signal) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 4 } dsx1TotalRAI OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of RAIS (Remote Alarm Indication) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 5 } dsx1TotalBPV OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 9 } dsx1TotalLOFC OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 11 } dsx1TotalLSES OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of LSES (Line Severely Errored Seconds) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 13 } dsx1TotalFC OBJECT-TYPE SYNTAX PerfTotalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of FC (Path failure events) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0." ::= { dsx1XTotalEntry 14 } -- DS1 Data Stream Statistics Table dsx1DataStreamStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1DataStreamStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Data Stream Statistics table." ::= { prtDs1PerfHistory 5 } dsx1DataStreamStatEntry OBJECT-TYPE SYNTAX Dsx1DataStreamStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS1 Data Stream Statistics table." INDEX { dsx1DataStreamStatIfIndex, dsx1DataStreamStatIndex } ::= { dsx1DataStreamStatTable 1 } Dsx1DataStreamStatEntry ::= SEQUENCE { dsx1DataStreamStatIfIndex Integer32, dsx1DataStreamStatIndex Integer32, dsx1DataStreamStatValid TruthValue, dsx1DataStreamStatInFrames Counter32, dsx1DataStreamStatInBytes Counter32, dsx1DataStreamStatInDiscards Counter32, dsx1DataStreamStatInErrors Counter32, dsx1DataStreamStatOutFrames Counter32, dsx1DataStreamStatOutBytes Counter32, dsx1DataStreamStatOutDiscards Counter32, dsx1DataStreamStatOutErrors Counter32 } dsx1DataStreamStatIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the DS1 interface. It may be ifIndex." ::= { dsx1DataStreamStatEntry 1 } dsx1DataStreamStatIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 Data Stream Index. For Vmux - the following indices are used: 1 for Transparent 2-3 for SS71-SS72 (respectively) 4-7 for Data1-Data4 (respectively) 8 for HDLC Ph2 Compatible 9-16 for Sub-CH1-1...Sub-CH1-8 (respectively)." ::= { dsx1DataStreamStatEntry 2 } dsx1DataStreamStatValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this Data Stream is valid or not. When invalid - all counters are irrelevant." ::= { dsx1DataStreamStatEntry 3 } dsx1DataStreamStatInFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of received frames, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 4 } dsx1DataStreamStatInBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of received bytes, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 5 } dsx1DataStreamStatInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Discarded incoming frames, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 6 } dsx1DataStreamStatInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of received Errored frames, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 7 } dsx1DataStreamStatOutFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of transmitted frames, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 8 } dsx1DataStreamStatOutBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of transmitted bytes, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 9 } dsx1DataStreamStatOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Discarded outgoing frames, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 10 } dsx1DataStreamStatOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of errored transmitted frames, encountered by the DS1 Data Stream." ::= { dsx1DataStreamStatEntry 11 } -- Extension to the DS1 Configuration Table dsx1XConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1XConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An extension to the DS1 Configuration table." ::= { ds1Interface 2 } dsx1XConfigEntry OBJECT-TYPE SYNTAX Dsx1XConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional configuration parameters." -- AUGMENTS { dsx1ConfigTable } INDEX { dsx1LineIndex } ::= { dsx1XConfigTable 1 } Dsx1XConfigEntry ::= SEQUENCE { dsx1IdleCode Integer32, dsx1LineMode INTEGER, dsx1dBTxGain INTEGER, dsx1RxSensitivity INTEGER, dsx1RestoreTime INTEGER, dsx1TcFirstSignal Integer32, dsx1TcSignal Integer32, dsx1TcPattern Integer32, dsx1Scramble INTEGER, dsx1LineAdaptiveTimingMode INTEGER, dsx1TxClockSource INTEGER, dsx1AisEnable INTEGER, dsx1TsEchoCancel OCTET STRING, dsx1EchoCancelerModule INTEGER, dsx1PortFunction INTEGER, dsx1PortMultiplier INTEGER, dsx1LeasedLine INTEGER, dsx1CsuLoop INTEGER, dsx1ClockSource Integer32, dsx1OosSignal INTEGER, dsx1BundleNextIndex Integer32, dsx1CRC6CalcMode INTEGER, dsx1SendUponFail INTEGER, dsx1InbandLoopSignal INTEGER, dsx1InbandLoopUpCode OCTET STRING, dsx1InbandLoopUpLength Unsigned32, dsx1InbandLoopDownCode OCTET STRING, dsx1InbandLoopDownLength Unsigned32, dsx1TxClockInstance Unsigned32, dsx1TxPortQuality INTEGER } dsx1IdleCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Byte pattern of the data received/transmitted in the E1T1 framer idle timeslots. Valid range: (0 - FF HEX)." ::= { dsx1XConfigEntry 1 } dsx1LineMode OBJECT-TYPE SYNTAX INTEGER { csu(1), dsu(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "T1 device operation mode. Valid for T1 only." ::= { dsx1XConfigEntry 2 } dsx1dBTxGain OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), neg75dB (2), neg15dB (3), neg225dB (4), zerodB (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit line Gain for T1 CSU line mode." ::= { dsx1XConfigEntry 3 } dsx1RxSensitivity OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), longHaul (2), shortHaul (3), monitor (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Low Sensitivity is considered Short Haul while High Sensitivity is considered Long Haul. The actual values depend on the LIU. Examples: - E1: -12dB is considered Short Haul ; -43dB is considered Long Haul - T1: -12dB is considered Short Haul ; -36dB is considered Long Haul. - monitor value applicable for M8E1/T1 ports" ::= { dsx1XConfigEntry 4 } dsx1RestoreTime OBJECT-TYPE SYNTAX INTEGER { other(1), sec1(2), sec10(3), immediate(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to change the sync. algorithms to reduce the time required for the port to return to normal operation after a RED alarm. 'sec1' = Fast, 'sec10' = TR-6211, 'immediate' = CCITT" ::= { dsx1XConfigEntry 5 } dsx1TcFirstSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trunk conditioning signal - value to be sent as a signal during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. This variable is used also for Space Signaling Code (in this case 0xFF is not NULL)." ::= { dsx1XConfigEntry 6 } dsx1TcSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trunk conditioning signal value after alarm detection. Range is 0x1..0xF for E1, and 0x0..0xF for T1. This variable is used also for Space Signaling Code (E1 and T1)." ::= { dsx1XConfigEntry 7 } dsx1TcPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF. This variable used also for Out of Service Code." ::= { dsx1XConfigEntry 8 } dsx1Scramble OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), notActive (2), active (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Scrambling is an operation that randomizes the bits of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the HEC. Not applicable for E1. active - will scramble/descramble the payload ATM cell notActive - will not scramble/descramble. " ::= { dsx1XConfigEntry 9 } dsx1LineAdaptiveTimingMode OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables end to end clock synchronization. Default value - off." ::= { dsx1XConfigEntry 10 } dsx1TxClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), throughTiming(3), adaptive(4), system(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock. 'adaptive' indicates that the clock is recovered according to the received data flow rate. 'system' indicates that the system clock is used as the transmit clock." ::= { dsx1XConfigEntry 11 } dsx1AisEnable OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), disable(2), enable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected)." ::= { dsx1XConfigEntry 12 } dsx1TsEchoCancel OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter defines for each TS whether Echo-Cancellation is on. Each bit represents one TS as follow: First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octet bit'0' = TS#9,.., 4th octet bit'7' = TS#32. Octets and bits order is from left to right: [31,30,..24] [23..16] [15..8] [7..0] MSB LSB MSB LSB MSB LSB MSB LSB For each bit values are: 0 - Echo-Cancellation off. 1 - Echo-Cancellation on." ::= { dsx1XConfigEntry 13 } dsx1EchoCancelerModule OBJECT-TYPE SYNTAX INTEGER { notExist(2), exist(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates whether echo-cancellation module exists for this line." ::= { dsx1XConfigEntry 14 } dsx1PortFunction OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), uni (2), ces (3), ima (4), cesPsn (5), abis (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the ATM Mode over the physical port. uni - The port will function as an ATM UNI. ces - The port will function as a CES. ima - The port will function as an IMA-ATM. cesPsn - The port will function as a CES-PSN. abis - The port will function as an Abis." ::= { dsx1XConfigEntry 15 } dsx1PortMultiplier OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), r56 (2), r64 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the data rate of each TS (Kbps units). This parameter is applicable for T1 only." ::= { dsx1XConfigEntry 16 } dsx1LeasedLine OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), disable (2), enable (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter defines whether Line mode is regular (non Leased Line mode) or transparent (Leased Line mode)." ::= { dsx1XConfigEntry 17 } dsx1CsuLoop OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), local (2), transparent (3), remote (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter defines where the CSU loop will be done: local - locally (by IPmux) towards the TDM device transparent - transferred to Remote Device that will send it to its connected TDM device. remote - Remote Device will close the loop towards the Local Device." ::= { dsx1XConfigEntry 18 } dsx1ClockSource OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This entry specifies the source from which the clock will be taken. Refer to device specification for source Index" ::= { dsx1XConfigEntry 19 } dsx1OosSignal OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), space (2), mark (3), spaceMark (4), markSpace (5) } MAX-ACCESS read-write STATUS current DESCRIPTION " This parameter defines the value to be sent as a signal after alarm detection: 'Space' = both A and B signaling bits are forced to '0' during out-of-service periods. 'Mark' = both A and B signaling bits are forced to '1' during out-of-service periods. 'spaceMark' = A and B bits are forced to '0' for 2.5 seconds; then they are switched to '1' until out-of-service condition disappears. 'markSpace' = A and B bits are forced to '1' for 2.5 seconds; then they are switched to '0' until out-of-service condition disappears. - '0'= 0 for T1, 1 for E1, or user defined value for Space - '1'= 1 for T1, 0 for E1, or user defined value for Mark." ::= { dsx1XConfigEntry 20 } dsx1BundleNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates the Next free Bundle Index for this DS1 port." ::= { dsx1XConfigEntry 21 } dsx1CRC6CalcMode OBJECT-TYPE SYNTAX INTEGER { jtG704 (1), ituG704(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines the CRC6 Calculation mode. jtG704 =JT-G704 = the Japanese standard ituG704=ITU-G704 = the International standard This parameter is applicable for J1 only." ::= { dsx1XConfigEntry 22 } dsx1SendUponFail OBJECT-TYPE SYNTAX INTEGER { oosCode (2), ais (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines which notification will be sent to the other side upon fail of another interface. In Ipmux14 the notification is sent upon failure of the Ethernet link." ::= { dsx1XConfigEntry 23 } dsx1InbandLoopSignal OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), csu (2), fdlLine (3), fdlNetwork (4), niuFac1 (5), niuFac2 (6), program (99) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter defines the signal pattern for inband loopback activation and deactivation: csu Applicable only for SF (D4) and ESF line types Defined in AT&T TR54016 and ANSI T1.403. Loop-up pattern - 00001 detected for at least 5 seconds Loop-down pattern - 001 detected for at least 5 seconds fdlLine Applicable only for ESF line type. Defined in ANSI T1.403. Loop-up pattern - 00001110 11111111 Loop-down pattern - 00111000 11111111 or 00100100 11111111 (universal deactivate) fdlNetwork Applicable only for ESF line type. Defined in ANSI T1.403. Loop-up pattern - 00010010 11111111 Loop-down pattern - 00100100 11111111 niuFac1 Applicable for framed and unframed line types. Define in Telcordia (Bellcore) TR-TSY-0312. Loop-up pattern - 0011 Loop-down pattern - 0111 niuFac2 Applicable for framed and unframed line types. Define in Telcordia (Bellcore) TR-TSY-0312. Loop-up pattern - 00011 Loop-down pattern - 00111 program User configurable loop-up and loop-down patterns. The patterns and their length are set in: dsx1InbandLoopUpCode dsx1InbandLoopUpLength dsx1InbandLoopDownCode dsx1InbandLoopDownLength The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4). This parameter is applicable only for T1." ::= { dsx1XConfigEntry 24 } dsx1InbandLoopUpCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies the inband signal pattern that shall cause activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4), and the value of dsx1InbandLoopSignal is program(99)." ::= { dsx1XConfigEntry 25 } dsx1InbandLoopUpLength OBJECT-TYPE SYNTAX Unsigned32 (3..8) UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies the length, in bits, of the inband signal pattern that shall cause activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4), and the value of dsx1InbandLoopSignal is program(99)." ::= { dsx1XConfigEntry 26 } dsx1InbandLoopDownCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies the inband signal pattern that shall cause de-activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4), and the value of dsx1InbandLoopSignal is program(99)." ::= { dsx1XConfigEntry 27 } dsx1InbandLoopDownLength OBJECT-TYPE SYNTAX Unsigned32 (3..8) UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies the length, in bits, of the inband signal pattern that shall cause de-activation of a loopback. The specified pattern is applicable only when the value of dsx1CsuLoop is local(2) or remote(4), and the value of dsx1InbandLoopSignal is program(99)." ::= { dsx1XConfigEntry 28 } dsx1TxClockInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "When dsx1TransmitClockSource is set to throughTiming(3) or adaptive(4), this parameter specifies the instance of the clock domain or recovered clock, respectively, that shall be used for transmission." ::= { dsx1XConfigEntry 29 } dsx1TxPortQuality OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), stratum1 (2), stratum2 (3), stratum3 (4), stratum3e (5), stratum4 (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the port clock quality." ::= { dsx1XConfigEntry 30 } --*************************** -- DS1 Statistics Thresholds --*************************** dsx1XStatThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1XStatThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension to the DS1 Configuration table that defines DS1 statistics thresholds. 'Line' means a physical transport of digital information at nominal rate of 2.048Mbps or 1.544Mbps. 'Path' means a framed digital signal at nominal rate of 2.048Mbps or 1.544Mbps independent of the specific transmission equipment." ::= { ds1Interface 3 } dsx1XStatThresholdEntry OBJECT-TYPE SYNTAX Dsx1XStatThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing statistics thresholds for DS1 port." INDEX { dsx1LineIndex } ::= { dsx1XStatThresholdTable 1 } Dsx1XStatThresholdEntry ::= SEQUENCE { dsx1LineIntervalLesThreshold Unsigned32, dsx1PathIntervalCvThreshold Unsigned32, dsx1PathIntervalEsThreshold Unsigned32, dsx1PathIntervalSesThreshold Unsigned32, dsx1PathIntervalSefsThreshold Unsigned32, dsx1PathIntervalCssThreshold Unsigned32, dsx1PathIntervalUasThreshold Unsigned32 } dsx1LineIntervalLesThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Error Seconds (ES) within any given 15-minute performance Line data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 1 } dsx1PathIntervalCvThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Code Violations (CV) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 2 } dsx1PathIntervalEsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Error Seconds (ES) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 3 } dsx1PathIntervalSesThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Severe Error Seconds (SES) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 4 } dsx1PathIntervalSefsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Severely Errored Framing Seconds (SEFS) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 5 } dsx1PathIntervalCssThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Controlled Slip Seconds (CSS) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 6 } dsx1PathIntervalUasThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the threshold for the number of Unavailable Seconds (UAS) within any given 15-minute performance Path data collection interval. If the value of Error Seconds in a particular 15-minute collection interval exceeded this value, a related Trap/Notification MAY be generated at the end of the interval. At most, one notification will be sent per interval per port." ::= { dsx1XStatThresholdEntry 7 } -- ALARM INDICATION SIGNAL (AIS) -- USER E1 LOCAL MULTIFRAME ALARM ds1LocalMultiframeAlarmTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, ifAlias} STATUS current DESCRIPTION "This trap indicates near end (Local) Loss of Multiframe Alignment, of the user E1 interface." ::= { prtDS1Events 1 } -- USER E1 REMOTE MULTIFRAME ALARM ds1RemoteMultiframeAlarmTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, ifAlias} STATUS current DESCRIPTION "This trap indicates that the far end (remote) unit, connected to the user E1 interface, reports Loss of Multiframe Alignment." ::= { prtDS1Events 2 } -- USER DS1 LINK FRAME SLIP ds1LinkFrameSlipTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, ifAlias} STATUS current DESCRIPTION "This trap indicates that a Frame Slip occurred at the user DS1 interface. This usually indicates timing problems (incorrect selection of timing reference), on the user DS1 link." ::= { prtDS1Events 3 } -- USER DS1 BPV ERROR ds1BpvErrorTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, ifAlias} STATUS current DESCRIPTION "This trap indicates a Bipolar Violation (BPV) error has been detected at the user DS1 interface." ::= { prtDS1Events 4 } -- USER DS1 EXCESSIVE BPV ds1ExcessiveBpvTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates excessive number of Bipolar Violation errors (BPV) detected by the user DS1 interface" ::= { prtDS1Events 5 } -- USER DS1 CRC-4 ERROR ds1Crc4ErrorTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, ifAlias} STATUS current DESCRIPTION "This trap indicates that a frame with CRC-4 error has been detected at the user DS1 interface." ::= { prtDS1Events 6 } -- USER DS1 EXCESSIVE ERROR RATIO ds1ExcessiveErrorRatioTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the error rate, detected at the user DS1 interface, on the frame synchronization bits is high, as defined by ITU-T Rec. G.732." ::= { prtDS1Events 7 } -- USER DS1 REMOTE SYNC LOSS ds1RemoteSyncLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the far-end (remote) unit, connected to user DS1 interface, reports Loss of Frame Alignment (Sync Loss)." ::= { prtDS1Events 8 } -- USER DS1 LOCAL SYNC LOSS ds1LocalSyncLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates near end (Local) Loss of Frame Alignment failure (Sync Loss), of the user DS1 interface" ::= { prtDS1Events 9 } -- USER DS1 AIS SYNC LOSS ds1AisSyncLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, ifAlias} STATUS current DESCRIPTION "This trap indicates near end (Local) Loss of Frame Alignment (Sync Loss), caused by the reception of AIS at the user DS1 interface." ::= { prtDS1Events 10 } -- USER DS1 AIS ds1AisTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates AIS being received at the user DS1 interface." ::= { prtDS1Events 11 } -- NETWORK REMOTE LOOP ds1NetworkRemoteLoopTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that a remote loopback has been activated, on the local uplink interface." ::= { prtDS1Events 12 } -- USER SIDE REMOTE LOOP ds1RemoteLoopTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that a remote loopback has been activated, on the local user port." ::= { prtDS1Events 13 } -- USER SIDE LOCAL LOOP ds1LocalLoopTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that a local loopback has been activated on the user port." ::= { prtDS1Events 14 } -- DS1 EXCESSIVE FRAME SLIP ds1ExcessiveFrameSlipTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the number of Frame Slips detected at the user DS1 interface, during the last minute exceeds threshold. For LA-110, threshold value is 10. This usually indicates timing problems (incorrect selection of timing reference) on the user DS1." ::= { prtDS1Events 15 } -- USER DS1 EXCESSIVE CRC 4 ERROR ds1ExcessiveCrc4ErrorTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the error rate detected on the CRC-4 bits at the user DS1 interface, is high." ::= { prtDS1Events 16 } -- USER E1 EXCESSIVE LOCAL MULTIFRAME ALARM ds1ExcessiveLocalMfAlarmTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the number of local Loss of Multiframe Alignment events, detected at the user E1 interface during the last minute exceeds threshold. For LA-110, threshold value is 10." ::= { prtDS1Events 17 } -- USER E1 EXCESSIVE REMOTE MULTIFRAME ALARM ds1ExcessiveRemoteMfAlarmTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the number of Loss of multiframe alignment events reported by the remote unit connected to the user E1 interface during the last minute exceeds threshold. For LA-110, threshold value is 10." ::= { prtDS1Events 18 } -- USER DS1 EXCESSIVE REMOTE SYNC LOSS ds1ExcessiveRemoteSyncLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the number of far end (remote) Loss of Synchronization alarms, reported by the user DS1 interface during the last minute, exceeds threshold. For LA-110, threshold value is 10." ::= { prtDS1Events 19 } -- USER DS1 EXCESSIVE LOCAL SYNC LOSS ds1ExcessiveLocalSyncLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the number of Loss of local Synchronization alarms reported by the user DS1 interface during the last minute, exceeds threshold. For LA-110, threshold value is 10." ::= { prtDS1Events 20 } -- USER DS1 SIGNAL LOSS ds1SignalLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates Signal Loss. (possible reason - cable disconnection. etc.)" ::= { prtDS1Events 21 } e1t1Ais NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1LineStatus } STATUS current DESCRIPTION "This trap indicates that an Alarm Indication Signal (AIS) was detected on an E1/T1 interface. " ::= { prtDS1Events 25 } -- LOSS OF FRAME (LOF) e1t1Lof NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1LineStatus } STATUS current DESCRIPTION "This trap indicates that a Loss of Frame (LOF) was detected on an E1/T1 interface. " ::= { prtDS1Events 26 } -- REMOTE ALARM INDICATION (RAI) e1t1Rai NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1LineStatus } STATUS current DESCRIPTION "This trap shows that a Remote Alarm Indication (RAI) was detected by an E1/T1 interface. " ::= { prtDS1Events 27 } -- LOSS OF MULTIFRAME (LOMF) e1t1Lomf NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1LineStatus } STATUS current DESCRIPTION "This trap indicates that a Loss of Multi-Frame was detected on an E1 interface. " ::= { prtDS1Events 28 } -- LOSS OF SIGNAL (LOS) e1t1Los NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1LineStatus } STATUS current DESCRIPTION "This trap indicates that a Loss of signal was detected on an E1/T1 interface. " ::= { prtDS1Events 30 } -- LOOPBACK e1t1Loopback NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1LoopbackStatus } STATUS current DESCRIPTION "This trap indicates that a Local or Remote Loopback has been activated on a T1/J1 interface. " ::= { prtDS1Events 36 } -- LOOPBACK OFF e1t1LoopbackOff NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias } STATUS current DESCRIPTION "This trap indicates that a Local or Remote Loopback has ended on a T1/J1 interface. " ::= { prtDS1Events 37 } -- ES LINE TCA e1t1EsLineTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalLESs, dsx1LineIntervalLesThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Line Errored Seconds (ES) threshold crossing alert" ::= { prtDS1Events 38 } -- CV PATH TCA e1t1CvPathTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalPCVs, dsx1PathIntervalCvThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Path Coding Violations (CV) threshold crossing alert" ::= { prtDS1Events 39 } -- ES PATH TCA e1t1EsPathTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalESs, dsx1PathIntervalEsThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Path Errored Seconds (ES) threshold crossing alert" ::= { prtDS1Events 40 } -- SES PATH TCA e1t1SesPathTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalSESs, dsx1PathIntervalSesThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Path Severely Errored Seconds (SES) threshold crossing alert" ::= { prtDS1Events 41 } -- SEFS PATH TCA e1t1SefsPathTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalSEFSs, dsx1PathIntervalSefsThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Path Severely Errored Framing Seconds (SEFS) threshold crossing alert" ::= { prtDS1Events 42 } -- CSS PATH TCA e1t1CssPathTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalCSSs, dsx1PathIntervalCssThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Path Controlled Slip Seconds (CSS) threshold crossing alert" ::= { prtDS1Events 43 } -- UAS PATH TCA e1t1UasPathTca NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, dsx1IntervalUASs, dsx1PathIntervalUasThreshold } STATUS current DESCRIPTION "This trap indicates DS1 Path Unavailable Seconds (UAS) threshold crossing alert" ::= { prtDS1Events 44 } END