DKSF-54-1-X-X-1 DEFINITIONS ::= BEGIN
 
IMPORTS
        enterprises,
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Counter32,
        Gauge32,
        Counter64,
        Integer32,
        TimeTicks,
        NOTIFICATION-TYPE 
                FROM SNMPv2-SMI 
        TEXTUAL-CONVENTION,
        DisplayString,
        TruthValue,
        TimeStamp
                FROM SNMPv2-TC 
        snmpTraps 
                FROM SNMPv2-MIB ;
                
 
netPing4Pwr MODULE-IDENTITY 
        LAST-UPDATED "201503020000Z"  
        ORGANIZATION "Alentis Electronics" 
        CONTACT-INFO 
                "developers@netping.ru" 
        DESCRIPTION 
                "MIB for NetPing 4PWR-220/SMS remote sensing and control" 

        REVISION "201503020000Z"   
        DESCRIPTION 
                "npRelHumidity branch added
                 npGsmSendSms variable added
                 npRelayMode values redefined"  
        
        REVISION "201406190000Z"   
        DESCRIPTION 
                "Initial release"  

        ::= { lightcom 54 }


                
lightcom OBJECT IDENTIFIER::={enterprises 25728 }

npRelay OBJECT IDENTIFIER::={ lightcom 5500 }

npRelayTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpRelayEntry
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Watchdog and outlet/relay control table"     
    ::= { npRelay 5 } 

npRelayEntry     OBJECT-TYPE 
    SYNTAX     NpRelayEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Relay/outlet table row"  
    INDEX     { npRelayN } 
    ::= { npRelayTable 1 } 

NpRelayEntry     ::= SEQUENCE { 
    npRelayN               INTEGER,
    npRelayMode            INTEGER,
    npRelayStartReset      INTEGER,
    npRelayMemo            DisplayString,
    npRelayFlip            INTEGER,    
    npRelayState           INTEGER,
    npRelayPowered         INTEGER
    } 
    
npRelayN  OBJECT-TYPE 
    SYNTAX     INTEGER  (1..4)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The N of output relay" 
    ::= { npRelayEntry 1 }
    
npRelayMode  OBJECT-TYPE
     SYNTAX     INTEGER {
                   flip(-1),
                   off(0),
                   on(1),
                   watchdog(2),
                   schedule(3),
                   scheduleAndWatchdog(4),
                   logic(5)
     }
     MAX-ACCESS     read-write
     STATUS     current
     DESCRIPTION     "Control of relay:
                     -1 - flip between on(1) and off(0)
                      0 - manual off 
                      1 - manual on
                      2 - watchdog
                      3 - schedule
                      4 - both schedule and watchdog (while switched on by schedule)
                      5 - logic"
     ::={npRelayEntry  2}
     
npRelayStartReset  OBJECT-TYPE
     SYNTAX     INTEGER
     MAX-ACCESS read-write
     STATUS     current
     DESCRIPTION     "Write 1 to start reset (switch relay off for some time)"
     ::={npRelayEntry 3}    
    
npRelayMemo  OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "Relay memo"
     ::={npRelayEntry 6}   

npRelayFlip  OBJECT-TYPE
     SYNTAX     INTEGER {
                   flip(-1)
     }
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "Write -1 to flip between manual on and manual off states of relay"
     ::={npRelayEntry  14}     

npRelayState  OBJECT-TYPE
     SYNTAX     INTEGER {
                   off(0),
                   on(1)
     }
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "Actual relay state at the moment, 
                      regardless of source of control.
                      0 - relay is off 
                      1 - relay is on"
     ::={npRelayEntry  15}

npRelayPowered OBJECT-TYPE
     SYNTAX     INTEGER {
                   no(0),
                   yes(1)
     }
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "AC presence on output (relay operation check)
                      0 - no AC on output socket
                      1 - AC is present on oputput"
     ::={npRelayEntry  16}
 

npPwr OBJECT IDENTIFIER::={ lightcom 5800 }

npPwrTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpPwrEntry
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Watchdog and outlet/relay control table"     
    ::= { npPwr 3 } 

npPwrEntry     OBJECT-TYPE 
    SYNTAX     NpPwrEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Watchdog control table row"  
    INDEX     { npPwrChannelN } 
    ::= { npPwrTable 1 } 

NpPwrEntry     ::= SEQUENCE { 
    npPwrChannelN               INTEGER,
    npPwrStartReset             INTEGER,
    npPwrResetsCounter          INTEGER,
    npPwrRepeatingResetsCounter INTEGER,
    npPwrMemo                   DisplayString
    } 
    
npPwrChannelN  OBJECT-TYPE 
    SYNTAX     INTEGER  (1..4)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The id of watchdog/power channel" 
    ::= { npPwrEntry 1 }
    
npPwrStartReset  OBJECT-TYPE
     SYNTAX     INTEGER (0..2)
     MAX-ACCESS read-only
     STATUS     obsolete
     DESCRIPTION     "Deprecated in current FW version: Write 1 to start forced reset.
                      On read:
                      0 - normal operation
                      1 - reset is active
                      2 - reboot pause is active or watchdog is inactive"
     ::={npPwrEntry 2}    
    
npPwrResetsCounter  OBJECT-TYPE
     SYNTAX     INTEGER (0..65535)
     MAX-ACCESS     read-write
     STATUS     current
     DESCRIPTION     "Counter of watchdog resets
                      Write 0 to clear."
     ::={npPwrEntry 4}

npPwrRepeatingResetsCounter  OBJECT-TYPE
     SYNTAX     INTEGER (0..65535)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION     "Counter of continous failed 
                      watchdog resets"
     ::={npPwrEntry 5}
     
npPwrMemo  OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS     read-only
     STATUS     current
     DESCRIPTION     "Watchdog channel memo"
     ::={npPwrEntry 6}     

 
 
npThermo OBJECT IDENTIFIER::={lightcom 8800}
     
npThermoTable       OBJECT-TYPE 
    SYNTAX     SEQUENCE OF NpThermoEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Thermo Sensors Table"     
    ::= { npThermo 1 } 

npThermoEntry       OBJECT-TYPE 
    SYNTAX     NpThermoEntry 
    MAX-ACCESS     not-accessible 
    STATUS     current 
    DESCRIPTION  "Thermo Sensors Table Row"     
    INDEX     { npThermoSensorN } 
    ::= { npThermoTable 1 } 

NpThermoEntry     ::= SEQUENCE { 
    npThermoSensorN INTEGER,
    npThermoValue   INTEGER,
    npThermoStatus  INTEGER,
    npThermoLow     INTEGER,
    npThermoHigh    INTEGER,
    npThermoMemo    DisplayString 
    } 

npThermoSensorN          OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The id of temperature sensor, 1 to 8" 
    ::= { npThermoEntry 1 }

npThermoValue     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature, deg.C" 
    ::= { npThermoEntry 2 }      
     
npThermoStatus    OBJECT-TYPE 
    SYNTAX     INTEGER {
                  failed(0),
                  low(1),
                  norm(2),
                  high(3)
                }     
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)" 
    ::= { npThermoEntry 3 }      

npThermoLow      OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Bottom margin of normal temperature range, deg.C" 
    ::= { npThermoEntry 4 } 

npThermoHigh     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Top margin of normal temperature range, deg.C" 
    ::= { npThermoEntry 5 } 
    
npThermoMemo    OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "T channel memo" 
    ::= { npThermoEntry 6 } 
    
    
npThermoTraps      OBJECT IDENTIFIER::={npThermo 2} 
npThermoTrapPrefix OBJECT IDENTIFIER::={npThermoTraps 0} 

npThermoTrapSensorN          OBJECT-TYPE 
    SYNTAX     INTEGER (1..8)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "The id of temperature sensor, 1 to 8" 
    ::= { npThermoTraps 1 }

npThermoTrapValue     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature, deg.C" 
    ::= { npThermoTraps 2 }      
     
npThermoTrapStatus    OBJECT-TYPE 
    SYNTAX     INTEGER {
                  failed(0),
                  low(1),
                  norm(2),
                  high(3)
                }     
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)" 
    ::= { npThermoTraps 3 }      

npThermoTrapLow      OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Bottom margin of normal temperature range, deg.C" 
    ::= { npThermoTraps 4 } 

npThermoTrapHigh     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..280)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Top margin of normal temperature range, deg.C" 
    ::= { npThermoTraps 5 } 
    
npThermoTrapMemo    OBJECT-TYPE 
    SYNTAX     DisplayString 
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "T channel memo" 
    ::= { npThermoTraps 6 } 
    
npThermoTrap NOTIFICATION-TYPE
OBJECTS { 
    npThermoTrapSensorN,
    npThermoTrapValue,
    npThermoTrapStatus,
    npThermoTrapLow,
    npThermoTrapHigh,
    npThermoTrapMemo 
        }
STATUS  current
DESCRIPTION
        "Status of Thermo sensor is changed (crossing of normal temp. range)"
::= { npThermoTrapPrefix 1 }



npRelHumidity OBJECT IDENTIFIER::={lightcom 8400}
npRelHumSensor OBJECT IDENTIFIER::={npRelHumidity 2}

npRelHumSensorStatus     OBJECT-TYPE 
    SYNTAX     INTEGER {
      error(0),
      ok(1)
      }
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Status of the Rel.Humidity Sensor One
                  1=Normal, 0=Error or Sensor isn't connected"
    ::= { npRelHumSensor 3 } 
    
npRelHumSensorValueH    OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Relative humidity value, %" 
    ::= { npRelHumSensor 2 } 
    
npRelHumSensorValueT     OBJECT-TYPE 
    SYNTAX     INTEGER (-60..200)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Sensor temperature, deg.C" 
    ::= { npRelHumSensor 4 }     

npRelHumSensorStatusH     OBJECT-TYPE 
    SYNTAX     INTEGER {
                  sensorFailed(0),
                  belowSafeRange(1),
                  inSafeRange(2),
                  aboveSafeRange(3)
                }  
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Status of Relative Humiduty" 
    ::= { npRelHumSensor 5 } 
	
npRelHumSafeRangeHigh    OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Relative Humidity safe range, top margin, %RH" 
    ::= { npRelHumSensor 7 } 	
	
npRelHumSafeRangeLow    OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Relative Humidity safe range, bottom margin, %RH" 
    ::= { npRelHumSensor 8 } 		

npRelHumSensorValueT100   OBJECT-TYPE 
    SYNTAX     Integer32
    MAX-ACCESS     read-only 
    STATUS     current 
    DESCRIPTION  "Sensor temperature, deg.C * 100 (fixed point two decimal places)
                  Used to get access to the fractional part of T value" 
    ::= { npRelHumSensor 9 } 

npRelHumTraps   OBJECT IDENTIFIER::={npRelHumidity 9} 
npRelHumTrapPrefix OBJECT IDENTIFIER::={npRelHumTraps 0} 	

npRelHumTrap NOTIFICATION-TYPE
    OBJECTS { 
	    npRelHumSensorStatusH,
      npRelHumSensorValueH,
	    npRelHumSafeRangeHigh,
	    npRelHumSafeRangeLow
        }
    STATUS  current
    DESCRIPTION
        "Status of Relative Humidity RH sensor has changed!"
    ::= { npRelHumTrapPrefix 1 }




npGsm  OBJECT IDENTIFIER::={lightcom 3800}
npGsmInfo OBJECT IDENTIFIER::={npGsm 1}

npGsmFailed  OBJECT-TYPE 
    SYNTAX     INTEGER {
                        ok (0), 
                        failed (1),
                        fatalError (2)
                       }
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "Firmware's GSM module status" 
    ::= { npGsmInfo 1 }   

npGsmRegistration OBJECT-TYPE 
    SYNTAX     INTEGER {
                        impossible (0), 
                        homeNetwork (1),
                        searching (2),
                        denied (3),
                        unknown (4),
                        roaming (5),
                        infoUpdate (255)
                       }
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "Status of modem registration in GSM network (AT+CREG? result)" 
    ::= { npGsmInfo 2 } 
    
npGsmStrength  OBJECT-TYPE 
    SYNTAX     INTEGER (0..255)
    MAX-ACCESS  read-only
    STATUS     current 
    DESCRIPTION  "GSM signal strength.
                  0..31 = 0..100%, 
                  99 = unknown or n/a, 
                  255 = updating info" 
    ::= { npGsmInfo 3 } 

npGsmSendSms  OBJECT-TYPE 
    SYNTAX    DisplayString
    MAX-ACCESS  read-write
    STATUS    current 
    DESCRIPTION  "Send arbitrary SMS.
                  Format: [phone_number,phone_number,...] Message
                  One to four destination phone numbers
                  If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup
                  Only Latin characters allowed in message body"
    ::= { npGsmInfo 9 }     

npGsmTraps      OBJECT IDENTIFIER::={npGsm 2} 
npGsmTrapPrefix OBJECT IDENTIFIER::={npGsmTraps 0} 

npGsmTrap NOTIFICATION-TYPE
    OBJECTS { 
          npGsmFailed,
          npGsmRegistration,
          npGsmStrength
        }
    STATUS  current
    DESCRIPTION
        "GSM modem or SMS firmware problems"
    ::= { npGsmTrapPrefix 1 }
    

npBattery OBJECT IDENTIFIER::={ lightcom 3900 }
npBatteryInfo OBJECT IDENTIFIER::={npBattery 1}

npBatteryPok   OBJECT-TYPE 
    SYNTAX     INTEGER {
                  batteryPower  (0),
                  externalPower (1)
                       }
    MAX-ACCESS read-only 
    STATUS     current 
    DESCRIPTION  "Power source" 
    ::= { npBatteryInfo 1 }   
    
npBatteryLevel   OBJECT-TYPE 
    SYNTAX     INTEGER (0..100)
    MAX-ACCESS read-only 
    STATUS     current 
    DESCRIPTION  "Battery charge, approximate value, in percent.
                  Valid only if npBatteryPok = 0" 
    ::= { npBatteryInfo 2 }  
    
npBatteryChg   OBJECT-TYPE 
    SYNTAX     INTEGER {
                  batteryChargingSuspended (0),
                  batteryFastCharging (1)
                    }
    MAX-ACCESS read-only 
    STATUS     current 
    DESCRIPTION  "Battery chargeing status.
                  0 if charging suspended or battery is full,
                  1 while LiPo fast charging." 
    ::= { npBatteryInfo 3 }          

    
npReboot OBJECT IDENTIFIER::={ lightcom 911 }   

npSoftReboot OBJECT-TYPE 
    SYNTAX     INTEGER
    MAX-ACCESS read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to reboot device after 
                  current operations completition" 
    ::= { npReboot 1 }

npResetStack OBJECT-TYPE 
    SYNTAX     INTEGER
    MAX-ACCESS read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to re-initialize network 
                  stack" 
    ::= { npReboot 2 }    

npForcedReboot OBJECT-TYPE 
    SYNTAX     INTEGER
    MAX-ACCESS read-write 
    STATUS     current 
    DESCRIPTION  "Write 1 to immediate forced reboot" 
    ::= { npReboot 3 } 
	
END