-- **************************************************************************** -- **************************************************************************** -- Copyright(c) 2004 Mediatrix Telecom, Inc. -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- **************************************************************************** -- **************************************************************************** MX-ETH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState, MxActivationState, MxIpHostName, MxIpAddress, MxIpPort, MxAdvancedIpPort, MxIpSubnetMask, MxDigitMap FROM MX-TC MxUInt64, MxFloat32, MxIpHostNamePort, MxIpAddr, MxIpAddrPort, MxIpAddrMask, MxUri, MxUrl FROM MX-TC2 mediatrixServices FROM MX-SMI2; ethMIB MODULE-IDENTITY LAST-UPDATED "1910210000Z" ORGANIZATION " Mediatrix Telecom, Inc. " CONTACT-INFO " Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION " Ethernet Manager The Ethernet Manager (Eth) service manages the unit's Ethernet link interfaces. " ::= { mediatrixServices 2400 } ethMIBObjects OBJECT IDENTIFIER ::= { ethMIB 1 } -- ***************************************************************************** -- Table:Ethernet Links Status -- ***************************************************************************** linkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LinkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet Links Status This table displays the status of all Ethernet links available on the mainboard. " ::= { ethMIBObjects 25 } linkStatusEntry OBJECT-TYPE SYNTAX LinkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Ethernet Links Status. " INDEX { linkStatusLinkName } ::= { linkStatusTable 1 } LinkStatusEntry ::= SEQUENCE { linkStatusLinkName OCTET STRING, linkStatusLinkType OCTET STRING, linkStatusLinkState INTEGER } -- Index:Link Interface linkStatusLinkName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Link Interface Name of the link interface. " ::= { linkStatusEntry 100 } -- Columnar:Link Type linkStatusLinkType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Link Type Type of link interface. " ::= { linkStatusEntry 200 } -- Columnar:Interface Status linkStatusLinkState OBJECT-TYPE SYNTAX INTEGER { disconnected(100) , up(200) } MAX-ACCESS read-only STATUS current DESCRIPTION " Interface Status Indicates the status of the Ethernet link interface. * Disconnected: The link interface is physically disconnected. * Up: The link interface is physically connected and considered as usable by network interface(s). " ::= { linkStatusEntry 300 } -- End of table:Ethernet Links Status -- ***************************************************************************** -- Table:Ethernet Links Settings -- ***************************************************************************** linksTable OBJECT-TYPE SYNTAX SEQUENCE OF LinksEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet Links Settings This table configures the Ethernet links of the mainboard. " ::= { ethMIBObjects 50 } linksEntry OBJECT-TYPE SYNTAX LinksEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Ethernet Links Settings. " INDEX { linksName } ::= { linksTable 1 } LinksEntry ::= SEQUENCE { linksName OCTET STRING, linksMtu Unsigned32, linksIeee8021XAuthentication INTEGER, linksVirtualSwitch MxEnableState } -- Index:Link Name linksName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Link Name The name of the Ethernet link. " ::= { linksEntry 100 } -- Columnar:MTU linksMtu OBJECT-TYPE SYNTAX Unsigned32 ( 576..1500 ) MAX-ACCESS read-write STATUS current DESCRIPTION " MTU Configures the MTU (Maximum Transmission Unit) of a specific Ethernet link. The range is from 576 to 1500 bytes. All VLAN connections use the MTU size configured on their related Ethernet link. Note that the MTU value applied for a PPPoE connection is the smallest of the value negotiated with the server and the value configured here. " DEFVAL { 1500 } ::= { linksEntry 200 } -- Columnar:IEEE 802.1x Authentication linksIeee8021XAuthentication OBJECT-TYPE SYNTAX INTEGER { disable(100) , enable(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " IEEE 802.1x Authentication Configures the IEEE 802.1x authentication protocol activation on the Ethernet link interface. * Disable: The IEEE 802.1x authentication protocol is disabled on the Ethernet link interface. * Enable: The IEEE 802.1x authentication protocol using the EAP-TLS authentication method is enabled on the Ethernet link to get an access, through an IEEE 802.1x EAP-TLS authenticator (such as an IEEE 802.1x capable network device), to secured network(s). The Ethernet link interface remains always 'UP' whatever the result of the IEEE 802.1x authentication. " DEFVAL { disable } ::= { linksEntry 300 } -- Columnar:Virtual Switch linksVirtualSwitch OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Virtual Switch Configures the link as a virtual switch. * Disable: The link cannot be used to provide network access to virtual machines. * Enable: The link can be used to provide network access to virtual machines. Note that the Virtual Switch parameter can only be enabled if the VM service is supported. " DEFVAL { disable } ::= { linksEntry 400 } -- End of table:Ethernet Links Settings -- ***************************************************************************** -- Table:Ethernet Ports Status -- ***************************************************************************** portsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PortsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet Ports Status This table displays the status of all Ethernet connectors of the mainboard. " ::= { ethMIBObjects 100 } portsStatusEntry OBJECT-TYPE SYNTAX PortsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Ethernet Ports Status. " INDEX { portsStatusName } ::= { portsStatusTable 1 } PortsStatusEntry ::= SEQUENCE { portsStatusName OCTET STRING, portsStatusLinkName OCTET STRING, portsStatusConnection INTEGER } -- Index:Port Name portsStatusName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Port Name The name of the Ethernet port. " ::= { portsStatusEntry 100 } -- Columnar:Link Name portsStatusLinkName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Link Name The link interface associated with this port. " ::= { portsStatusEntry 200 } -- Columnar:Speed portsStatusConnection OBJECT-TYPE SYNTAX INTEGER { disconnected(0) , half10(100) , full10(200) , half100 (300) , full100(400) , full1000(500) } MAX-ACCESS read-only STATUS current DESCRIPTION " Speed Indicates the speed, duplex, and state of the connection. * Disconnected: This port is physically disconnected. * Half10: This port is connected at 10 Mbit/s Half-duplex. * Full10: This port is connected at 10 Mbit/s Full-duplex. * Half100: This port is connected at 100 Mbit/s Half-duplex. * Full100: This port is connected at 100 Mbit/s Full-duplex. * Full1000: This port is connected at 1 Gbit/s Full-duplex. " ::= { portsStatusEntry 300 } -- End of table:Ethernet Ports Status -- ***************************************************************************** -- Table:Ethernet Ports Settings -- ***************************************************************************** portsTable OBJECT-TYPE SYNTAX SEQUENCE OF PortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet Ports Settings This table configures the Ethernet ports of the mainboard. " ::= { ethMIBObjects 200 } portsEntry OBJECT-TYPE SYNTAX PortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Ethernet Ports Settings. " INDEX { portsName } ::= { portsTable 1 } PortsEntry ::= SEQUENCE { portsName OCTET STRING, portsSpeed INTEGER } -- Index:Port Name portsName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Port Name The name of the Ethernet port. " ::= { portsEntry 100 } -- Columnar:Speed portsSpeed OBJECT-TYPE SYNTAX INTEGER { auto(100) , half10(200) , full10(300) , half100(400) , full100(500) , full1000(600) } MAX-ACCESS read-write STATUS current DESCRIPTION " Speed Configures the speed and duplex of the connection. * Auto: Automatic negociation of speed and duplex. * Half10: 10 Mbit/s Half-duplex. * Full10: 10 Mbit/s Full-duplex. * Half100: 100 Mbit/s Half-duplex. * Full100: 100 Mbit/s Full-duplex. * Full1000: 1 Gbit/s Full-duplex. " DEFVAL { auto } ::= { portsEntry 200 } -- End of table:Ethernet Ports Settings -- ***************************************************************************** -- Table:Ethernet VLAN Settings -- ***************************************************************************** vlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet VLAN Settings This table configures the Ethernet Virtual LAN interfaces of the system. " ::= { ethMIBObjects 300 } vlanEntry OBJECT-TYPE SYNTAX VlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Ethernet VLAN Settings. " INDEX { vlanIdx } ::= { vlanTable 1 } VlanEntry ::= SEQUENCE { vlanIdx Unsigned32, vlanLinkName OCTET STRING, vlanVlanId Unsigned32, vlanDefaultUserPriority Unsigned32, vlanConfigStatus INTEGER, vlanDelete INTEGER } -- Columnar:Link Name vlanLinkName OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..10) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Link Name Name of the Ethernet link used by the VLAN interface. " DEFVAL { "" } ::= { vlanEntry 100 } -- Columnar:Vlan ID vlanVlanId OBJECT-TYPE SYNTAX Unsigned32 ( 0..4094 ) MAX-ACCESS read-write STATUS current DESCRIPTION " Vlan ID VLAN ID used by the VLAN interface. " DEFVAL { 0 } ::= { vlanEntry 200 } -- Columnar:Default User Priority vlanDefaultUserPriority OBJECT-TYPE SYNTAX Unsigned32 ( 0..7 ) MAX-ACCESS read-write STATUS current DESCRIPTION " Default User Priority Default User Priority value the interface uses when tagging packets. Specific service class values may be set in the Local Quality of Service (LQos) ServiceClasses table. " DEFVAL { 0 } ::= { vlanEntry 300 } -- Columnar:Config Status vlanConfigStatus OBJECT-TYPE SYNTAX INTEGER { validConfig(100) , invalidLinkName(200) , invalidVlanId(300) , duplicateLinkVlanId(400) } MAX-ACCESS read-only STATUS current DESCRIPTION " Config Status Configuration status of the row. It indicates whether the configuration of the row is valid or not. * ValidConfig: This entry is valid. * InvalidLinkName: The entry is not valid because the LinkName parameter is either empty or refers to an inexistent link. * InvalidVlanId: This entry is not valid because VlanId 0 is invalid. * DuplicateLinkVlanId: This entry is not valid because the VLAN is already used. " DEFVAL { invalidLinkName } ::= { vlanEntry 350 } -- Row command:Delete vlanDelete OBJECT-TYPE SYNTAX INTEGER { noOp(0), delete(10) } MAX-ACCESS read-write STATUS current DESCRIPTION " Delete Deletes the VLAN interface and removes it from the system. " DEFVAL { noOp } ::= { vlanEntry 400 } -- Index:Idx vlanIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Idx Unique identifier of the row in the table. " ::= { vlanEntry 50 } -- End of table:Ethernet VLAN Settings -- **************************************************************************** -- Group:Extensible Authentication Protocol (EAP) -- **************************************************************************** eapGroup OBJECT IDENTIFIER ::= { ethMIBObjects 10000 } -- *************************************************************************** -- Table:Extensible Authentication Protocol (EAP) -- *************************************************************************** eapTable OBJECT-TYPE SYNTAX SEQUENCE OF EapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Extensible Authentication Protocol (EAP) This table configures the EAP settings. " ::= { eapGroup 100 } eapEntry OBJECT-TYPE SYNTAX EapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Extensible Authentication Protocol (EAP). " INDEX { eapName } ::= { eapTable 1 } EapEntry ::= SEQUENCE { eapName OCTET STRING, eapUsername OCTET STRING, eapCertificateValidation INTEGER } -- Index:Link Name eapName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Link Name The name of the Ethernet link. " ::= { eapEntry 100 } -- Columnar:EAP Username eapUsername OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..64) ) MAX-ACCESS read-write STATUS current DESCRIPTION " EAP Username Username used to authenticate each Ethernet link interfaces during the IEEE 802.1x EAP-TLS authentication process. This parameter is used only when the IEEE 802.1x authentication is enabled (Links.Ieee8021XAuthentication set to 'Enabled'). " DEFVAL { "" } ::= { eapEntry 200 } -- Columnar:EAP Certificate Validation eapCertificateValidation OBJECT-TYPE SYNTAX INTEGER { noValidation(100) , trustedAndValid(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " EAP Certificate Validation Level of validation used by the device to authenticate the IEEE 802.1x EAP-TLS peer's certificate. This parameter controls also the criteria used to select the host certificate sent during the authentitication handshake. * NoValidation: No validation is performed on the peer's certificate. Authentication with the peer is attempted even if the system time is not synchronized. If more than one host certificate is configured for an EAP-TLS usage, the one with the latest expiration date is used. * TrustedAndValid: Allow a connection to the network by validating if the authentication peer's certificate is trusted and valid. The IEEE 802.1x authentication is attempted only if the system time is synchronized. If more than one host certificate is configured for an EAP-TLS usage, the one that is currently valid and with the latest expiration date is used. " DEFVAL { trustedAndValid } ::= { eapEntry 300 } -- End of table:Extensible Authentication Protocol (EAP) -- Scalar:IEEE 802.1X version ieee8021XVersion OBJECT-TYPE SYNTAX INTEGER { ieee8021X2001(100) , ieee8021X2004(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " IEEE 802.1X version Version of IEEE 802.1X used by the unit. " DEFVAL { ieee8021X2001 } ::= { eapGroup 200 } -- End of group:Extensible Authentication Protocol (EAP) -- **************************************************************************** -- Group:Notification Messages Configuration -- **************************************************************************** notificationsGroup OBJECT IDENTIFIER ::= { ethMIBObjects 60010 } -- Scalar:Minimal Severity of Notification minSeverity OBJECT-TYPE SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) , error(400) , critical (500) } MAX-ACCESS read-write STATUS current DESCRIPTION " Minimal Severity of Notification Sets the minimal severity to issue a notification message incoming from this service. * Disable: No notification is issued. * Debug: All notification messages are issued. * Info: Notification messages with a 'Informational' and higher severity are issued. * Warning: Notification messages with a 'Warning' and higher severity are issued. * Error: Notification messages with an 'Error' and higher severity are issued. * Critical: Notification messages with a 'Critical' severity are issued. " DEFVAL { warning } ::= { notificationsGroup 100 } -- End of group:Notification Messages Configuration -- **************************************************************************** -- Group:Configuration Settings -- **************************************************************************** configurationGroup OBJECT IDENTIFIER ::= { ethMIBObjects 60020 } -- Scalar:Need Restart needRestartInfo OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " Need Restart Indicates if the service needs to be restarted for the configuration to fully take effect. * Yes: Service needs to be restarted. * No: Service does not need to be restarted. Services can be restarted by using the Scm.ServiceCommands.Restart command. " ::= { configurationGroup 100 } -- End of group:Configuration Settings END