-- **SDOC*********************************************************************** -- ***************************************************************************** -- -- Copyright(c) 2005 Mediatrix Telecom, Inc. -- Copyright(c) 2008 Media5 Corporation. ("Media5") -- -- NOTICE: -- This document contains information that is confidential and proprietary -- to Media5. -- -- Media5 reserves all rights to this document as well as to the Intellectual -- Property of the document and the technology and know-how that it includes -- and represents. -- -- This publication cannot be reproduced, neither in whole nor in part, in -- any form whatsoever without written prior approval by Media5. -- -- Media5 reserves the right to revise this publication and make changes at -- any time and without the obligation to notify any person and/or entity of -- such revisions and/or changes. -- ***************************************************************************** -- **EDOC*********************************************************************** MX-ATM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState FROM MX-TC mediatrixMgmt, mediatrixConfig FROM MX-SMI; atmMIB MODULE-IDENTITY LAST-UPDATED "200501270000Z" ORGANIZATION "Mediatrix Telecom, Inc." CONTACT-INFO "Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada, J1L 2C8 Phone: (819) 829-8749 http://www.mediatrix.com" DESCRIPTION "This MIB is used to configure ATM/OAM/AAL5 layers and to provide stats from those layers." -- ************************************************************************* -- Revision history -- ************************************************************************* REVISION "200808250000Z" DESCRIPTION "Correction of atmTxTrafficClass and atmRxTrafficClass enum syntax. Corrections of atmVcEnable defvalue" REVISION "200501270000Z" DESCRIPTION "Creation." REVISION "200501310000Z" DESCRIPTION "Revision by reviewer." REVISION "200502080000Z" DESCRIPTION "Corrections." REVISION "200509010000Z" DESCRIPTION "Multiple PVC support." ::= { mediatrixConfig 300 } atmMIBObjects OBJECT IDENTIFIER ::= { atmMIB 1 } atmConformance OBJECT IDENTIFIER ::= { atmMIB 2 } atmStatus OBJECT IDENTIFIER ::= { mediatrixMgmt 150 } -- ************************************************************************* -- Table of Virtal Circuit, indexed by channels -- ************************************************************************* atmVcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of supported virtual circuit (VC)" ::= { atmMIBObjects 50 } atmVcEntry OBJECT-TYPE SYNTAX AtmVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the atmVcTable table. It contains the configuration of the VC for this interface." INDEX { atmVcIndex } ::= { atmVcTable 5 } AtmVcEntry ::= SEQUENCE { atmVcIndex Unsigned32, atmVcName OCTET STRING, atmVcEnable MxEnableState, atmVcType INTEGER, atmVcInUse INTEGER, atmVpi Unsigned32, atmVci Unsigned32, atmEncapsulation INTEGER, atmTxTrafficClass INTEGER, atmTxPeakCellRate Unsigned32, atmTxSustainableCellRate Unsigned32, atmTxMaximumBurstSize Unsigned32, atmTxCellDelayVariationTolerance Unsigned32, atmTxMinimumCellRate Unsigned32, atmTxMaximumSdu Unsigned32, atmRxTrafficClass INTEGER, atmRxPeakCellRate Unsigned32, atmRxSustainableCellRate Unsigned32, atmRxMaximumBurstSize Unsigned32, atmRxCellDelayVariationTolerance Unsigned32, atmRxMinimumCellRate Unsigned32, atmRxMaximumSdu Unsigned32 } atmVcIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index for supported VC." ::= { atmVcEntry 50 } atmVcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates a user-defined name for this VC." ::= { atmVcEntry 55 } atmVcEnable OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the VC." DEFVAL { disable } ::= { atmVcEntry 60 } atmVcType OBJECT-TYPE SYNTAX INTEGER { bridge(0), wan(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the function for which this VC will be used. bridge : If the IpRouting is disabled, the LAN port will use the first enabled bridge VC in order to act as a bridge for a IP device connected to the Computer port. In case that the IpRouting is enabled, all bridge VCs are ignored. wan: This type of VC is used for WAN. The type of the first VC is set to WAN and it is always enabled since it is requested to have a valid configuration. This WAN VC is always the one used to operate/administrate and manage the unit." DEFVAL { bridge } ::= { atmVcEntry 65 } atmVcInUse OBJECT-TYPE SYNTAX INTEGER { notUsed(0), inUse(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "VC usage state." DEFVAL { notUsed } ::= { atmVcEntry 75 } atmVpi OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the selected Virtual Path Indicator to use for the VC connection." DEFVAL { 0 } ::= { atmVcEntry 100 } atmVci OBJECT-TYPE SYNTAX Unsigned32 (32..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the selected Virtual Channel Indicator to use for the VC connection." DEFVAL { 32 } ::= { atmVcEntry 150 } atmEncapsulation OBJECT-TYPE SYNTAX INTEGER { llcBridged(0), vcMuxBridged(1), llcRouted(3), vcMuxRouted(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the encapsulation used. llcBridged(0) : LLC SNAP Encapsulation used with a bridged protocol. vcMuxBridged(1): VC Mux encapsulation used with a bridged protocol. llcRouted(3) : LLC SNAP Encapsulation used with a routed protocol. vcMuxRouted(4) : VC Mux encapsulation used with a routed protocol." DEFVAL { llcBridged } ::= { atmVcEntry 200 } atmTxTrafficClass OBJECT-TYPE SYNTAX INTEGER { ubr(1), cbr(2), vbr(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic class value for VC. ubr(1) : Undefined Bit Rate (best effort) cbr(2) : Constant Bit Rate vbr(3) : Variable Bit Rate" DEFVAL { ubr } ::= { atmVcEntry 250 } atmTxPeakCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the peak cell rate used by this VC.(cells/seconds)" DEFVAL { 0 } ::= { atmVcEntry 300 } atmTxSustainableCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Sustainable Cell Rate used by this VC.(cells/seconds) Only meaningful for atmQos = VBR." DEFVAL { 0 } ::= { atmVcEntry 350 } atmTxMaximumBurstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum burst size for this VC.(cells/seconds) Only meaningful for a traffic class of VBR." DEFVAL { 0 } ::= { atmVcEntry 400 } atmTxCellDelayVariationTolerance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum Cell Delay Variation Tolerance for the VC connection in microseconds. Only meaningful for traffic class of VBR or CBR." DEFVAL { 0 } ::= { atmVcEntry 450 } atmTxMinimumCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the minimum cell rate size for this VC. (cells/seconds)" DEFVAL { 0 } ::= { atmVcEntry 500 } atmTxMaximumSdu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum size of payload for an ATM cell for the VC connection (bytes)." DEFVAL { 1524 } ::= { atmVcEntry 550 } atmRxTrafficClass OBJECT-TYPE SYNTAX INTEGER { ubr(1), cbr(2), vbr(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic class value for VC. ubr(1) : Undefined Bit Rate (best effort) cbr(2) : Constant Bit Rate vbr(3) : Variable Bit Rate" DEFVAL { ubr } ::= { atmVcEntry 575 } atmRxPeakCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the peak cell rate used by this VC.(cells/seconds)" DEFVAL { 0 } ::= { atmVcEntry 600 } atmRxSustainableCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Sustainable Cell Rate used by this VC.(cells/seconds) Only meaningful for a traffic class of VBR." DEFVAL { 0 } ::= { atmVcEntry 650 } atmRxMaximumBurstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum burst size for this VC.(cells/seconds) Only meaningful for a traffic class of VBR." DEFVAL { 0 } ::= { atmVcEntry 700 } atmRxCellDelayVariationTolerance OBJECT-TYPE SYNTAX Unsigned32 (0..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Cell Delay Variation Tolerance for the VC connection.(micro seconds) Only meaningful for a traffic class of VBR or CBR." DEFVAL { 0 } ::= { atmVcEntry 750 } atmRxMinimumCellRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the minimum cell rate size for this VC. (cells/seconds)" DEFVAL { 0 } ::= { atmVcEntry 800 } atmRxMaximumSdu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum size of payload for an ATM cell for the VC connection (bytes)." DEFVAL { 1524 } ::= { atmVcEntry 850 } -- ************************************************************************* -- ATM OAM commands -- ************************************************************************* oamTools OBJECT IDENTIFIER ::= { atmMIBObjects 100 } oamResult OBJECT-TYPE SYNTAX INTEGER { failed(0), success(1), pending(2), notStarted(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Hold the values of the last OAM operation performed. failed(0): OAM test failed. success(1): OAM test success. pending(2): OAM test pending. notStarted(3): OAM not started " ::= { oamTools 50 } generateOamPing OBJECT-TYPE SYNTAX INTEGER { noOp(0), ping(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This command generates an OAM ping operation. This command has the following values: - noOp(0) : No operation. When read, this value is returned. - ping(1) : Perform the OAM ping. This command also uses the following variables: - oamPingType: F4 OAM ping or F5 OAM ping. - oamVpi : Value for the VPI. - oamVci : Value for the VCI (only used for f5OamPing commands). - oamMode: Value for the OAM mode (end-to-end or segment) - oamLimitTimeout:Timeout value in milliseconds" DEFVAL { noOp } ::= { oamTools 100 } -- ******************************************************************** -- ATM OAM parameters -- ******************************************************************** oamToolsParameters OBJECT IDENTIFIER ::= { oamTools 1000 } oamPingType OBJECT-TYPE SYNTAX INTEGER { f4OamPing(0), f5OamPing(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This command generates an OAM ping operation. This command has the following values: - f4OamPing(0): OAM ping on the VP. - f5OamPing(1): OAM ping on the VC." DEFVAL { f4OamPing } ::= { oamToolsParameters 100 } oamVpi OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the VPI part of the PVC to be tested for an OAM ping command." DEFVAL { 0 } ::= { oamToolsParameters 150 } oamVci OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the VCI part of the PVC to be tested by an OAM ping command. Only used for F5 OAM ping." DEFVAL { 32 } ::= { oamToolsParameters 200 } oamMode OBJECT-TYPE SYNTAX INTEGER { segmented(0), endToEnd(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates what the target of the OAM ping command refers to. segmented(0): Middle man of VC endToEnd(1) : End point of VC" DEFVAL { endToEnd } ::= { oamToolsParameters 250 } oamTimeOut OBJECT-TYPE SYNTAX Unsigned32 (0 | 10..60000) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates a timeout value in milliseconds to wait for the completion of the OAM ping. 0 means no limit. Otherwise the lower limit is 10 milliseconds." DEFVAL { 0 } ::= { oamToolsParameters 300 } -- ************************************************************************* -- aal5Stats -- ************************************************************************* aal5Stats OBJECT IDENTIFIER ::= { atmStatus 200 } aal5TxPdu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of AAL5 frames sent since last reset." ::= { aal5Stats 50 } aal5RxPdu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of AAL5 frames received since last reset." ::= { aal5Stats 100 } aal5TxTotalBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes sent with AAL5 since last reset." ::= { aal5Stats 150 } aal5RxTotalBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes received with AAL5 since last reset." ::= { aal5Stats 200 } aal5TxTotalErrorCounts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total error counts with AAL5 on cells sent since last reset." ::= { aal5Stats 250 } aal5RxTotalErrorCounts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total error counts with AAL5 on cells received since last reset." ::= { aal5Stats 300 } -- ************************************************************************* -- oamStats -- ************************************************************************* oamStats OBJECT IDENTIFIER ::= { atmStatus 250 } oamNearEndF5LoopBackCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of segmented OAM F5 Ping since last reset." ::= { oamStats 50 } oamNearEndF4LoopBackCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of segmented OAM F4 Ping since last reset." ::= { oamStats 100 } oamFarEndF5LoopBackCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of end-to-end OAM F5 Ping since last reset." ::= { oamStats 150 } oamFarEndF4LoopBackCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter indicating the number of end-to-end OAM F4 Ping since last reset." ::= { oamStats 200 } -- ************************************************************************* -- Conformance information -- ************************************************************************* atmCompliances OBJECT IDENTIFIER ::= { atmConformance 1 } atmComplVer1 MODULE-COMPLIANCE STATUS current DESCRIPTION "List of groups required to support ATM." MODULE -- This Module MANDATORY-GROUPS { atmVcVer1, atmOamVer1, atmStatusVer1 } ::= { atmCompliances 1 } -- ************************************************************************* -- MIB variable grouping -- ************************************************************************* atmGroups OBJECT IDENTIFIER ::= { atmConformance 5 } atmVcVer1 OBJECT-GROUP OBJECTS { atmVcIndex, atmVcInUse, atmVpi, atmVci, atmEncapsulation, atmTxTrafficClass, atmTxPeakCellRate, atmTxSustainableCellRate, atmTxMaximumBurstSize, atmTxCellDelayVariationTolerance, atmTxMinimumCellRate, atmTxMaximumSdu, atmRxTrafficClass, atmRxPeakCellRate, atmRxSustainableCellRate, atmRxMaximumBurstSize, atmRxCellDelayVariationTolerance, atmRxMinimumCellRate, atmRxMaximumSdu } STATUS current DESCRIPTION "A collection of objects that defines the characteristics of VCs." ::= { atmGroups 50} atmOamVer1 OBJECT-GROUP OBJECTS { oamResult, generateOamPing, oamPingType, oamVpi, oamVci, oamMode, oamTimeOut } STATUS current DESCRIPTION "A collection of objects that defines the characteristics of OAMs." ::= { atmGroups 100 } atmStatusVer1 OBJECT-GROUP OBJECTS { aal5TxPdu, aal5RxPdu, aal5TxTotalBytes, aal5RxTotalBytes, aal5TxTotalErrorCounts, aal5RxTotalErrorCounts, oamNearEndF5LoopBackCount, oamNearEndF4LoopBackCount, oamFarEndF5LoopBackCount, oamFarEndF4LoopBackCount } STATUS current DESCRIPTION "A collection of objects that defines the status of ATM." ::= { atmGroups 150 } END