LUM-SYNC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, NOTIFICATION-TYPE FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF DateAndTime, TruthValue, DisplayString FROM SNMPv2-TC lumModules, lumSyncMIB FROM LUM-REG SubrackNumber, SlotNumber, PortNumber, MgmtNameString, FaultStatus, CommandString, SyncSourceState, SyncSourceMode, BoardOrInterfaceOperStatus, BoardOrInterfaceAdminStatus, AdminStatus FROM LUM-TC; lumSyncMIBModule MODULE-IDENTITY LAST-UPDATED "201801250000Z" -- January 25th 2018 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The MIB module for manamement of Synchronizatrion sources. The tables included in this MIB are: (1) The General group contains some general attributes as timestamps and tables sizes. (2) The Sync group table contains information on the group of synchronization sources available on each board. (3) The Sync source table contains information and configuration of each individual synchronization source. Sources can be either external traffic ports, other external ports, internal oscillators or backplane buses. (4) The Sync domain table contains information and configuration on each defined synchronization domain. A sync domain is defined as a number of sync groups that have possibility to share synchronization signals and information on the quality of these signals via one or several interconnections, like a backplane bus or external ports. (5) The Sync bus table contains information and configuration of each available backplane bus used for distributing sync signal between boards. (6) The Sync Board to domain table contains information on what domain a board is part of and what boards are part of what domain. " REVISION "201801250000Z" -- January 25th 2018 DESCRIPTION "Changes made for release r31.0: - Added hdea1600 board" REVISION "201709010000Z" -- September 1st 2017 DESCRIPTION "Changes made for release r30.0: - Added emxp440 board" REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201602010000Z" -- Feb 1st 2016 DESCRIPTION "- Add syncSourceIfNo, syncSourceUpPortId syncSourceLocalId for EMXP3. - Correct admin status and oper status type for syncSource." REVISION "201501140000Z" -- Jan 14th 2015 DESCRIPTION "Added emxp240iie board" REVISION "201212251200Z" -- 25 December 2012 DESCRIPTION "Added two sync source alarms. SyncWander is set to hidden." REVISION "201105310000Z" -- May 31st 2011 DESCRIPTION "Added sync domain table. Added sync bus table. Added sync board to domain mapping table. Deprecated sync subrack table, replaced by sync bus table." REVISION "200711120000Z" -- Nov 12th 2007 DESCRIPTION "Fixed compliance." REVISION "200212110000Z" -- Dec 11th 2002 DESCRIPTION "Added sourceChanged notification." REVISION "200211200000Z" -- Nov 20th 2002 DESCRIPTION "Changed help text for ringMode." REVISION "200205160000Z" -- May 16th 2002 DESCRIPTION "The initial revision of this module." ::= { lumModules 17 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumSyncConfs OBJECT IDENTIFIER ::= { lumSyncMIB 1 } lumSyncGroups OBJECT IDENTIFIER ::= { lumSyncConfs 1 } lumSyncCompl OBJECT IDENTIFIER ::= { lumSyncConfs 2 } -- ---------------------------------------------------- -- Root for objects in the sync MIB -- ---------------------------------------------------- lumSyncMIBObjects OBJECT IDENTIFIER ::= { lumSyncMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- syncGeneral OBJECT IDENTIFIER ::= { lumSyncMIBObjects 1 } syncGroups OBJECT IDENTIFIER ::= { lumSyncMIBObjects 2 } syncSources OBJECT IDENTIFIER ::= { lumSyncMIBObjects 3 } lumentisSyncNotifications OBJECT IDENTIFIER ::= { lumSyncMIBObjects 4 } syncSubracks OBJECT IDENTIFIER ::= { lumSyncMIBObjects 5 } syncDomains OBJECT IDENTIFIER ::= { lumSyncMIBObjects 6 } syncBuses OBJECT IDENTIFIER ::= { lumSyncMIBObjects 7 } syncBoardToDomain OBJECT IDENTIFIER ::= { lumSyncMIBObjects 8 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- syncGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { syncGeneral 1 } syncGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { syncGeneral 2 } syncGeneralSyncGroupTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of sync group table " ::= { syncGeneral 3 } syncGeneralSyncSourceTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of sync source table " ::= { syncGeneral 4 } syncGeneralSyncSubrackTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Size of subrack table " ::= { syncGeneral 5 } syncGeneralSyncDomainTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of sync domain table " ::= { syncGeneral 6 } syncGeneralSyncBusTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of sync bus table " ::= { syncGeneral 7 } syncGeneralSyncBoardToDomainTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of sync board to domain table " ::= { syncGeneral 8 } -- ---------------------------------------------------- -- Sync groups -- ---------------------------------------------------- syncGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SyncGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sync group table." ::= { syncGroups 1 } syncGroupEntry OBJECT-TYPE SYNTAX SyncGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sync group table. One entry per group of interfaces where sync can be configured. " INDEX { syncGroupIndex } ::= { syncGroupTable 1 } SyncGroupEntry ::= SEQUENCE { syncGroupIndex Unsigned32, syncGroupName MgmtNameString, syncGroupSubrack SubrackNumber, syncGroupSlot SlotNumber, syncGroupMode INTEGER, syncGroupManualSource Unsigned32, syncGroupSelectedSource MgmtNameString, syncGroupQuality Unsigned32, --syncGroupLocalOscActiveC2W FaultStatus, syncGroupLocalOscActiveW2C FaultStatus, syncGroupLocalOscActive FaultStatus, syncGroupAdminStatus BoardOrInterfaceAdminStatus, syncGroupOperStatus BoardOrInterfaceOperStatus, syncGroupRingMode INTEGER, syncGroupLastChangeTime DateAndTime, syncGroupManualSourceName MgmtNameString, syncGroupConfigurationMode INTEGER, syncGroupStatus INTEGER, syncGroupSourceSwitch CommandString, syncGroupSourceSwitchType INTEGER, syncGroupHoldover FaultStatus, syncGroupQualityLevelSelectionMode INTEGER} syncGroupIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each if entry. " ::= { syncGroupEntry 1 } syncGroupName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the sync group. " ::= { syncGroupEntry 2 } syncGroupSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The subrack number for the group of interfaces. " ::= { syncGroupEntry 3 } syncGroupSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number for the group of interfaces. " ::= { syncGroupEntry 4 } syncGroupMode OBJECT-TYPE SYNTAX INTEGER { manual(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The sync mode for the sync group. manual - Sync source is chosen manually. auto - The sync source is chosen automatically. " DEFVAL { manual } ::= { syncGroupEntry 5 } --- 040109 B2098 --- To handle conversion 2.1 -> 2.2, this is an hidden attribute that is saved --- A new string attribute is introduced, syncGroupManualSourceName: it is --- settable, but is NOT saved in the backup --- Note the confusion with the aliases for these two attributes: this is --- intentional. syncGroupManualSource OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the sync source currently used to sync the trunk. " DEFVAL { 0 } ::= { syncGroupEntry 6 } syncGroupSelectedSource OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the sync source currently used to sync the trunk. " ::= { syncGroupEntry 7 } syncGroupQuality OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The sync quality that will be distributed to the outgoing (client) tributaries. " ::= { syncGroupEntry 8 } syncGroupLocalOscActiveW2C OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Local oscillator used to sync clients. A: The sync for clients is taken from the local sync source. D: The sync for clients is taken from the WDM signal. " ::= { syncGroupEntry 9 } syncGroupLocalOscActive OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Local oscillator used to synchronize trunc and clients A: The sync is taken from the local sync source. D: The sync is taken from the trunc or any of the client signals. " ::= { syncGroupEntry 10 } syncGroupAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative state for the sync group. down - Alarms are not sent. up - The sync function is enabled service - Alarms are not sent " DEFVAL { up } ::= { syncGroupEntry 11 } syncGroupOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the sync group. notPresent - The physical resource is not available. down - The sync group is disabled. up - The sync group is enabled. " DEFVAL { notPresent } ::= { syncGroupEntry 12 } syncGroupRingMode OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Decides whether sync group is part of a sync ring or not. off - Used when the muxponder is used as a terminal multiplexor for point-to-point connections, or as a hub-node in an SDH ring. In this mode, the incoming trunc can never be selected as synchronization source for the outgoing trunc. on - Used when the muxponder is used as an add-drop muxFeeder in an SDH ring, i.e. some AU4s are passed-through to the outgoing trunc. In this mode, the outgoing S1 byte on the trunc is set to the actual quality of the synchronization function, even if the outgoing trunc is synchronized by the incoming trunc. " DEFVAL { off } ::= { syncGroupEntry 13 } syncGroupLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the sync selected sync source changed the last time. " ::= { syncGroupEntry 14 } syncGroupManualSourceName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the sync source that the user has selected to sync the trunk and the outgoing (client) tributaries. Only applicable if 'manual' is used. " DEFVAL { "" } ::= { syncGroupEntry 15 } syncGroupConfigurationMode OBJECT-TYPE SYNTAX INTEGER { neverUseTrunc (1), uniDirRingSatellite (2), standardG707 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Decides the synchronization behaviour. neverUseTrunc - Used when the muxponder is used as a terminal multiplexor for point-to-point connections, or as a hub-node in an SDH ring. In this mode, the incoming trunc can never be selected as synchronization source for the outgoing trunc. uniDirRingSatellite - Used when the muxponder is used as an add-drop muxFeeder in an SDH ring, i.e. some AU4s are passed-through to the outgoing trunc. In this mode, the outgoing S1 byte on the trunc is set to the actual quality of the synchronization function, even if the outgoing trunc is synchronized by the incoming trunc. standardG707 - The incoming trunc can be selected as a synchronization source. When the incoming trunc is selected, the S1 byte sent on the outgoing trunc is set to 'DoNotUse'. " ::= { syncGroupEntry 16 } syncGroupStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), holdover (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status for the selected source. normal - The selected source is not in holdover mode. holdover - The selected source is in holdover (digital hold) mode. " DEFVAL { normal } ::= { syncGroupEntry 17 } syncGroupSourceSwitch OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "The command for performing a manual or forced sync source switch as defined in ITU-T G.781: - The manual switched source can be used to override the currently selected source, on condition that the manual source is nominated in the selection process, and it is not in Failed state. If the sync selection process is running in Quality Level enabled mode, the manual switch source must also have a Quality Level equal to or better than the currently selected source. - The forced switched source can be used to override the currently selected source, on condition that the forced source is nominated in the selection process and it is not in Failed State. The forced source switch command overrides the manual switch command. " ::= { syncGroupEntry 18 } syncGroupSourceSwitchType OBJECT-TYPE SYNTAX INTEGER { auto (1), manual (2), forced (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indication on what caused the currently selected source to be selected. auto - The source was selected from a normal sync selection process without any user commands. manual - The source was selected via a Manual Source Switch command. forced - The source was selected via a Forced Source Switch command. " DEFVAL { auto } ::= { syncGroupEntry 19 } syncGroupHoldover OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The sync group is in holdover mode. A: The chosen sync source has gone into holdover (digital hold) mode, or no source has been chosen. D: A sync source is chosen which is not holdover mode. " ::= { syncGroupEntry 20 } syncGroupQualityLevelSelectionMode OBJECT-TYPE SYNTAX INTEGER {disabled (1), enabled (2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates wether the sync group is operating in Quality Level selection mode. For Layer 2 ethernet boards, this attribute is dependant on the configuration of the sync domain that the group is a member of. If the group is not part of a sync domain, the attribute is set to disabled. " DEFVAL { disabled } ::= { syncGroupEntry 21 } -- ---------------------------------------------------- -- Sync sources -- ---------------------------------------------------- syncSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF SyncSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sync source table." ::= { syncSources 1 } syncSourceEntry OBJECT-TYPE SYNTAX SyncSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sync source table. " INDEX { syncSourceIndex } ::= { syncSourceTable 1 } SyncSourceEntry ::= SEQUENCE { syncSourceIndex Unsigned32, syncSourceName MgmtNameString, syncSourceId Unsigned32, syncSourceIfNo PortNumber, syncSourceRxPort PortNumber, syncSourceTxPort PortNumber, syncSourceType INTEGER, syncSourceQuality Unsigned32, syncSourcePriority Unsigned32, syncSourceAdminStatus AdminStatus, syncSourceOperStatus BoardOrInterfaceOperStatus, syncSourceIsSelected TruthValue, syncSourceAlwaysSendDoNotUse INTEGER, syncSourceStaticQuality Unsigned32, syncSourceFilterState SyncSourceState, syncSourceMode SyncSourceMode, syncSourceClearWaitToRestore CommandString, syncSourceClockWanderExceeded FaultStatus, syncSourceNonSyncEClock FaultStatus, syncSourceUpPortId Integer32, syncSourceLocalId Integer32 } syncSourceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to the sync source. " ::= { syncSourceEntry 1 } syncSourceName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the sync source. " ::= { syncSourceEntry 2 } syncSourceId OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "A unique number of the source within its group. " DEFVAL { 1 } ::= { syncSourceEntry 3 } syncSourceRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The port number for the Rx-side of the interface where the signal is retrieved. 0 if the sync source is a local oscillator. " DEFVAL { 0 } ::= { syncSourceEntry 4 } syncSourceTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The port number for the Tx-side of the interface where the signal is retrieved. 0 if the sync source is a local oscillator. " DEFVAL { 0 } ::= { syncSourceEntry 5 } syncSourceType OBJECT-TYPE SYNTAX INTEGER { oscillator (1), signal (2), external (3), bus (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of sync source. oscillator - The sync source is a local oscillator. signal - The sync source is a signal. external - External sync source bus - The sync bus in the back plane " DEFVAL { 3 } ::= { syncSourceEntry 6 } syncSourceQuality OBJECT-TYPE SYNTAX Unsigned32 (0..18) MAX-ACCESS read-only STATUS current DESCRIPTION "The quality for the sync source. The received S1-byte is shown. The integer values can be interpreted as follows: SDH/SyncE (G.707/G.781): S1 Quality Description ----------------------- 0 0 Quality unknown (existing sync. network) 2 2 Traceable to PRC G.811 4 4 Traceable to Transit G.812 8 8 Traceable to Local G.812 11 11 Derived from SETS 15 15 Do not use for Synchronization. Other bytes are reserved. SONET (GR253 CORE) - not applicable for EMXP boards: S1 Quality Description ----------------------- 0 2 Synchronized - Traceability Unknown 1 1 Traceble to Stratum 1 4 4 Transit Node Clock Traceable 7 3 Traceble to Stratum 2 10 6 Traceble to Stratum 3 12 7 SONET Minimum Clock 13 5 Traceble to Stratum 3E 14 X Provisonable by operator User 15 9 Do not use for Synchronization The following values are also defined for interal use: Value Quality Description ------------------------- 16 NSUPP Quality Level not supported by function. 17 FAIL Sync Source in fail state. 18 UNC Sync source unconnected. " ::= { syncSourceEntry 7 } syncSourcePriority OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The sync source priority. Used to prioritize among sync source with the same quality. 1 is the best, 16 is the worst. " DEFVAL { 8 } ::= { syncSourceEntry 8 } syncSourceAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative state for the sync source. down - The sync source is disabled. up - The sync source is enabled and can be used for syncing. " DEFVAL { down } ::= { syncSourceEntry 9 } syncSourceOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the sync source. notPresent - The physical resource is not available. down - The sync source is disabled. up - The sync source is enabled. " DEFVAL { notPresent } ::= { syncSourceEntry 10 } syncSourceIsSelected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the sync source is selected or not. false - The sync source is not in use. true - The sync source is in use. " ::= { syncSourceEntry 11 } syncSourceAlwaysSendDoNotUse OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls whether to ALWAYS send S1 = 'Do not use' on the port corresponding to this source. disabled - Send the actual S1 value of the synchronization function. However, if this source is the selected sync source, then S1 = 'Do not use' is sent on the corresponding port. enabled - Always send 'Do not use', regardless of the state of the synchonization function. " DEFVAL { disabled } ::= { syncSourceEntry 12 } syncSourceStaticQuality OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute is used to assign a static G.781 Option 1 Quality level to the source for use in the Synch Source Selection process. Values are interpreted as below: S1 Quality Decsription ----------------------- 0 0 Static Quality Disabled 2 2 Traceable to PRC G.811 4 4 Traceable to Transit G.812 8 8 Traceable to Local G.812 11 11 Derived from SETS 15 15 Do not use for Synchronisation. Other bytes are reserved. " DEFVAL { 0 } ::= { syncSourceEntry 13 } syncSourceFilterState OBJECT-TYPE SYNTAX SyncSourceState MAX-ACCESS read-only STATUS current DESCRIPTION " The state of the source in the synchronization selection algorithm it is included in. undefined - The source is not included in any selection algorithm or the state is not been reported. normal - The source is functional fail - The source has indicated a failure and is excluded from the selection algorithm. waitToRestore - The source has recovered from failure state, but is held out of the selection algorithm until the wait to restore time has run out. " ::= { syncSourceEntry 14 } syncSourceMode OBJECT-TYPE SYNTAX SyncSourceMode MAX-ACCESS read-write STATUS current DESCRIPTION " The operating mode of the sync source. disabled - The source is disabled from the sync selection process and will not send or terminate SSM messages. Any incoming SSM messages will be passed on transparently. enabled - The source is included in the sync selection process and will both send and terminate SSM messages. lockedOut - The source is not enabled in the sync selection process, but terminates all incoming SSM messages. If the sync selection process is operating in Quality level enabled mode it will also send the Quality level of the selected sync source. The quality level for a source in lockedOut mode will be shown as DNU. " DEFVAL { disabled } ::= { syncSourceEntry 15 } syncSourceClearWaitToRestore OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Clears an active Wait To Restore timer for the sync source. " ::= { syncSourceEntry 16 } --- 121019 --- This attribute is hidden in R20 but will be fully implemented in R21 --- Code is operational but the implementation of the alarm , ie how it --- works will be reworked according to ITU-T Rec. G.810(08/96) syncSourceClockWanderExceeded OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The sync source has drifted at a rate that exceeds the limit. " ::= { syncSourceEntry 17 } syncSourceNonSyncEClock OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Sync source not SyncE compliant. " ::= { syncSourceEntry 18 } syncSourceIfNo OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The physical interface number of the actual multi-connector port. " DEFVAL { 1 } ::= { syncSourceEntry 19 } syncSourceUpPortId OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Internal port reference for traffic unit. " DEFVAL { -1 } ::= { syncSourceEntry 20 } syncSourceLocalId OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Id for index calculation. " DEFVAL { -1 } ::= { syncSourceEntry 21 } -- ---------------------------------------------------- -- Sync subracks -- ---------------------------------------------------- syncSubrackTable OBJECT-TYPE SYNTAX SEQUENCE OF SyncSubrackEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The sync subrack table. Note: This table is deprecated!" ::= { syncSubracks 1 } syncSubrackEntry OBJECT-TYPE SYNTAX SyncSubrackEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the sync subrack table. " INDEX { syncSubrackIndex } ::= { syncSubrackTable 1 } SyncSubrackEntry ::= SEQUENCE { syncSubrackIndex Unsigned32, syncSubrackName MgmtNameString, syncSubrackSubrack SubrackNumber, syncSubrackMasterBusA SlotNumber, syncSubrackMasterBusB SlotNumber, syncSubrackConfigureLocalBus CommandString, syncSubrackGroupMasterBusA DisplayString, syncSubrackGroupMasterBusB DisplayString } syncSubrackIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "An arbitrary index assigned to each if entry. " ::= { syncSubrackEntry 1 } syncSubrackName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The name of the sync subrack. " ::= { syncSubrackEntry 2 } syncSubrackSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The subrack number. " ::= { syncSubrackEntry 3 } syncSubrackMasterBusA OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The slotnumber for the sync group currently driving local bus A. " ::= { syncSubrackEntry 4 } syncSubrackMasterBusB OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The slotnumber for the sync group currently driving local bus B. " ::= { syncSubrackEntry 5 } syncSubrackConfigureLocalBus OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Configures synchronization of the local buses. " ::= { syncSubrackEntry 6 } syncSubrackGroupMasterBusA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sync group currently driving local bus A. " ::= { syncSubrackEntry 7 } syncSubrackGroupMasterBusB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sync group currently driving local bus B. " ::= { syncSubrackEntry 8 } -- ---------------------------------------------------- -- Sync Domains -- ---------------------------------------------------- syncDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF SyncDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sync domain table." ::= { syncDomains 1 } syncDomainEntry OBJECT-TYPE SYNTAX SyncDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sync domain table. " INDEX { syncDomainIndex } ::= { syncDomainTable 1 } SyncDomainEntry ::= SEQUENCE { syncDomainIndex Unsigned32, syncDomainNumber Unsigned32, syncDomainName MgmtNameString, syncDomainQualityLevelSelectionMode INTEGER, syncDomainWaitToRestore Unsigned32, syncDomainHoldOff Unsigned32, syncDomainSource MgmtNameString, syncDomainQuality Unsigned32, syncDomainAssociateBoard CommandString} syncDomainIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each domain entry. " ::= { syncDomainEntry 1 } syncDomainNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number unique to each domain entry. " ::= { syncDomainEntry 2 } syncDomainName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the sync domain. " ::= { syncDomainEntry 3 } syncDomainQualityLevelSelectionMode OBJECT-TYPE SYNTAX INTEGER {disabled (1), enabled (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The mode in which the Synchronization Selection Process for the domain operates. enabled - The reported Quality Level of the Synchronization sources are taken into account in the selection process. disabled - The Quality Level is not taken into account. " DEFVAL { 1 } ::= { syncDomainEntry 4 } syncDomainWaitToRestore OBJECT-TYPE SYNTAX Unsigned32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in minutes that a synchronization source is removed from the synchronization selection process after it has changed its Quality level from Failed to another value. The time is configurable in the range from 0 to 12 in the steps of 1 minute for all sources in the domain. " DEFVAL { 5 } ::= { syncDomainEntry 5 } syncDomainHoldOff OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in milliseconds that a source should have failed until this is passed on the Synchronization selection process. " DEFVAL { 300 } ::= { syncDomainEntry 6 } syncDomainSource OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the currently selected sync source. " ::= { syncDomainEntry 7 } syncDomainQuality OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The quality of the currently selected sync source. " ::= { syncDomainEntry 8 } syncDomainAssociateBoard OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Assigns boards to a sync domain. Boards within a domain will share domain configuration and information on the sync quality of the sync signal being distributed in the domain. A sync bus must also be assigned to the domain and a board set as the sync bus master. " ::= { syncDomainEntry 9 } -- ---------------------------------------------------- -- Sync Bus -- ---------------------------------------------------- syncBusTable OBJECT-TYPE SYNTAX SEQUENCE OF SyncBusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sync bus table." ::= { syncBuses 1 } syncBusEntry OBJECT-TYPE SYNTAX SyncBusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sync bus table. " INDEX { syncBusIndex } ::= { syncBusTable 1 } SyncBusEntry ::= SEQUENCE { syncBusIndex Unsigned32, syncBusName MgmtNameString, syncBusSubrack Unsigned32, syncBusDomain Unsigned32, syncBusDomainIndex Unsigned32, syncBusStaticMasterSlot SlotNumber, syncBusStaticMasterIndex Unsigned32 } syncBusIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each if entry. " ::= { syncBusEntry 1 } syncBusName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the sync bus. " ::= { syncBusEntry 2 } syncBusSubrack OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack that the bus belongs to. " ::= { syncBusEntry 3 } syncBusDomain OBJECT-TYPE SYNTAX Unsigned32(0..160) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of the domain that the bus belongs to. " ::= { syncBusEntry 4 } syncBusDomainIndex OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the domain the bus belongs to. " ::= { syncBusEntry 5 } syncBusStaticMasterSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The slot number of the board driving the bus. " ::= { syncBusEntry 6 } syncBusStaticMasterIndex OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The index number of the board driving the bus. " ::= { syncBusEntry 7 } -- ---------------------------------------------------- -- Sync Board to Domain -- ---------------------------------------------------- syncBoardToDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF SyncBoardToDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sync board to domain table." ::= { syncBoardToDomain 1 } syncBoardToDomainEntry OBJECT-TYPE SYNTAX SyncBoardToDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the board to domain table. " INDEX { syncBoardToDomainIndex } ::= { syncBoardToDomainTable 1 } SyncBoardToDomainEntry ::= SEQUENCE { syncBoardToDomainIndex Unsigned32, syncBoardToDomainName MgmtNameString, syncBoardToDomainDomainIndex Unsigned32, syncBoardToDomainDomainName MgmtNameString, syncBoardToDomainBoardIndex Unsigned32, syncBoardToDomainBoardName MgmtNameString} syncBoardToDomainIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each if entry. " ::= { syncBoardToDomainEntry 1 } syncBoardToDomainName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the mapped entry " ::= { syncBoardToDomainEntry 2 } syncBoardToDomainDomainIndex OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the domain mapped in the entry. " ::= { syncBoardToDomainEntry 3 } syncBoardToDomainDomainName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the domain mapped in the entry " ::= { syncBoardToDomainEntry 4 } syncBoardToDomainBoardIndex OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the board mapped in the entry. " ::= { syncBoardToDomainEntry 5 } syncBoardToDomainBoardName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the board mapped in the entry " ::= { syncBoardToDomainEntry 6 } -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- syncNotifyPrefix OBJECT IDENTIFIER ::= { lumentisSyncNotifications 0 } syncGroupSourceChanged NOTIFICATION-TYPE OBJECTS { syncGroupIndex, syncGroupName, syncGroupSelectedSource, syncSourceName, syncGroupLastChangeTime, syncSourceQuality } STATUS current DESCRIPTION "Sent when the sync group changes its selected sync source. " ::= { syncNotifyPrefix 1 } -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- syncGeneralGroup OBJECT-GROUP OBJECTS { syncGeneralLastChangeTime } STATUS deprecated DESCRIPTION "The general sync objects." ::= { lumSyncGroups 1 } syncGroupGroup OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, -- syncGroupLocalOscActiveC2W, syncGroupLocalOscActiveW2C } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 2 } syncSourceGroup OBJECT-GROUP OBJECTS { syncSourceIndex, syncSourceName, syncSourceRxPort, syncSourceTxPort, syncSourceType, syncSourceQuality, syncSourcePriority, syncSourceAdminStatus, syncSourceOperStatus, syncSourceIsSelected } STATUS current DESCRIPTION "The sync source objects." ::= { lumSyncGroups 3 } syncGeneralGroupV2 OBJECT-GROUP OBJECTS { syncGeneralLastChangeTime, syncGeneralStateLastChangeTime } STATUS deprecated DESCRIPTION "The general sync objects." ::= { lumSyncGroups 4 } syncGroupGroupV2 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, -- syncGroupLocalOscActiveC2W, syncGroupLocalOscActiveW2C, syncGroupAdminStatus, syncGroupOperStatus } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 5 } syncGroupGroupV3 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, -- syncGroupLocalOscActiveC2W, syncGroupLocalOscActiveW2C, syncGroupAdminStatus, syncGroupOperStatus, syncGroupRingMode } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 6 } syncSourceGroupV2 OBJECT-GROUP OBJECTS { syncSourceIndex, syncSourceId, syncSourceName, syncSourceRxPort, syncSourceTxPort, syncSourceType, syncSourceQuality, syncSourcePriority, syncSourceAdminStatus, syncSourceOperStatus, syncSourceIsSelected } STATUS deprecated DESCRIPTION "The sync source objects V2." ::= { lumSyncGroups 7 } syncNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { syncGroupSourceChanged } STATUS current DESCRIPTION "The sync notifications." ::= { lumSyncGroups 8 } syncGroupGroupV4 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, -- syncGroupLocalOscActiveC2W, syncGroupLocalOscActiveW2C, syncGroupAdminStatus, syncGroupOperStatus, syncGroupRingMode, syncGroupLastChangeTime } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 9 } syncSourceGroupV3 OBJECT-GROUP OBJECTS { syncSourceIndex, syncSourceId, syncSourceName, syncSourceRxPort, syncSourceTxPort, syncSourceType, syncSourceQuality, syncSourcePriority, syncSourceAdminStatus, syncSourceOperStatus, syncSourceIsSelected, syncSourceAlwaysSendDoNotUse } STATUS deprecated DESCRIPTION "The sync source objects V3." ::= { lumSyncGroups 10 } --syncGroupGroupV5 OBJECT-GROUP -- OBJECTS { -- syncGroupIndex, -- syncGroupSubrack, -- syncGroupSlot, -- syncGroupName, -- syncGroupMode, -- syncGroupManualSource, -- syncGroupSelectedSource, -- syncGroupQuality, -- syncGroupLocalOscActive, -- syncGroupAdminStatus, -- syncGroupOperStatus, -- syncGroupRingMode, -- syncGroupLastChangeTime } -- STATUS deprecated -- DESCRIPTION -- "The sync group objects." -- ::= { lumSyncGroups 11 } syncGroupGroupV6 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, syncGroupLocalOscActive, syncGroupAdminStatus, syncGroupOperStatus, syncGroupRingMode, syncGroupLastChangeTime, syncGroupManualSourceName } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 12 } syncGeneralGroupV3 OBJECT-GROUP OBJECTS { syncGeneralLastChangeTime, syncGeneralStateLastChangeTime, syncGeneralSyncGroupTableSize, syncGeneralSyncSourceTableSize, syncGeneralSyncSubrackTableSize } STATUS current DESCRIPTION "The general sync objects." ::= { lumSyncGroups 13 } syncGroupGroupV7 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, syncGroupLocalOscActive, syncGroupAdminStatus, syncGroupOperStatus, syncGroupRingMode, syncGroupLastChangeTime, syncGroupManualSourceName, syncGroupConfigurationMode } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 14 } syncSubrackGroup OBJECT-GROUP OBJECTS { syncSubrackIndex, syncSubrackSubrack, syncSubrackName, syncSubrackMasterBusA, syncSubrackMasterBusB, syncSubrackConfigureLocalBus } STATUS deprecated DESCRIPTION "The sync group objects." ::= { lumSyncGroups 15 } syncGroupGroupV8 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, syncGroupLocalOscActive, syncGroupAdminStatus, syncGroupOperStatus, syncGroupRingMode, syncGroupLastChangeTime, syncGroupManualSourceName, syncGroupConfigurationMode, syncGroupStatus } STATUS current DESCRIPTION "The sync group objects." ::= { lumSyncGroups 16 } syncSubrackGroupV2 OBJECT-GROUP OBJECTS { syncSubrackIndex, syncSubrackSubrack, syncSubrackName, syncSubrackMasterBusA, syncSubrackMasterBusB, syncSubrackConfigureLocalBus, syncSubrackGroupMasterBusA, syncSubrackGroupMasterBusB } STATUS current DESCRIPTION "The sync group objects." ::= { lumSyncGroups 17 } syncSourceGroupV4 OBJECT-GROUP OBJECTS { syncSourceIndex, syncSourceId, syncSourceName, syncSourceRxPort, syncSourceTxPort, syncSourceType, syncSourceQuality, syncSourcePriority, syncSourceAdminStatus, syncSourceOperStatus, syncSourceIsSelected, syncSourceAlwaysSendDoNotUse, syncSourceStaticQuality, syncSourceFilterState } STATUS deprecated DESCRIPTION "The sync source objects V4." ::= { lumSyncGroups 18 } syncDomainGroup OBJECT-GROUP OBJECTS { syncDomainIndex, syncDomainName, syncDomainNumber, syncDomainQualityLevelSelectionMode, syncDomainWaitToRestore, syncDomainHoldOff, syncDomainSource, syncDomainQuality, syncDomainAssociateBoard } STATUS current DESCRIPTION "The sync domain objects." ::= { lumSyncGroups 19 } syncBusGroup OBJECT-GROUP OBJECTS { syncBusIndex, syncBusName, syncBusSubrack, syncBusDomain, syncBusDomainIndex, syncBusStaticMasterSlot, syncBusStaticMasterIndex } STATUS current DESCRIPTION "The sync bus objects." ::= { lumSyncGroups 20 } syncBoardToDomainGroup OBJECT-GROUP OBJECTS { syncBoardToDomainIndex, syncBoardToDomainName, syncBoardToDomainDomainIndex, syncBoardToDomainDomainName, syncBoardToDomainBoardIndex, syncBoardToDomainBoardName } STATUS current DESCRIPTION "The Board to domain objects." ::= { lumSyncGroups 21 } syncGroupGroupV9 OBJECT-GROUP OBJECTS { syncGroupIndex, syncGroupSubrack, syncGroupSlot, syncGroupName, syncGroupMode, syncGroupManualSource, syncGroupSelectedSource, syncGroupQuality, syncGroupLocalOscActive, syncGroupAdminStatus, syncGroupOperStatus, syncGroupRingMode, syncGroupLastChangeTime, syncGroupManualSourceName, syncGroupConfigurationMode, syncGroupStatus, syncGroupSourceSwitch, syncGroupSourceSwitchType, syncGroupHoldover, syncGroupQualityLevelSelectionMode} STATUS current DESCRIPTION "The sync group objects V9." ::= { lumSyncGroups 22 } syncSourceGroupV5 OBJECT-GROUP OBJECTS { syncSourceIndex, syncSourceId, syncSourceName, syncSourceRxPort, syncSourceTxPort, syncSourceType, syncSourceQuality, syncSourcePriority, syncSourceAdminStatus, syncSourceOperStatus, syncSourceIsSelected, syncSourceAlwaysSendDoNotUse, syncSourceStaticQuality, syncSourceFilterState, syncSourceClockWanderExceeded, syncSourceNonSyncEClock} STATUS deprecated DESCRIPTION "The sync source objects V5." ::= { lumSyncGroups 23 } syncSourceGroupV6 OBJECT-GROUP OBJECTS { syncSourceIndex, syncSourceId, syncSourceName, syncSourceRxPort, syncSourceTxPort, syncSourceType, syncSourceQuality, syncSourcePriority, syncSourceAdminStatus, syncSourceOperStatus, syncSourceIsSelected, syncSourceAlwaysSendDoNotUse, syncSourceStaticQuality, syncSourceFilterState, syncSourceClockWanderExceeded, syncSourceNonSyncEClock, syncSourceIfNo, syncSourceUpPortId, syncSourceLocalId} STATUS current DESCRIPTION "The sync source objects V6." ::= { lumSyncGroups 24 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumSyncBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB." MODULE MANDATORY-GROUPS { syncGeneralGroup, syncGroupGroup, syncSourceGroup } ::= { lumSyncCompl 1 } lumSyncBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v2." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroup, syncSourceGroup } ::= { lumSyncCompl 2 } lumSyncBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v3." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV2, syncSourceGroup } ::= { lumSyncCompl 3 } lumSyncBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v4." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV3, syncSourceGroup } ::= { lumSyncCompl 4 } lumSyncBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v5." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV3, syncSourceGroupV2 } ::= { lumSyncCompl 5 } lumSyncBasicComplV6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v6." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV3, syncSourceGroupV2, syncNotificationGroup } ::= { lumSyncCompl 6 } lumSyncBasicComplV7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v7." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV4, syncSourceGroupV2, syncNotificationGroup } ::= { lumSyncCompl 7 } lumSyncBasicComplV8 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v8." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV4, syncSourceGroupV3, syncNotificationGroup } ::= { lumSyncCompl 8 } lumSyncBasicComplV9 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB v9 (2.2)." MODULE MANDATORY-GROUPS { syncGeneralGroupV2, syncGroupGroupV6, syncSourceGroupV3, syncNotificationGroup } ::= { lumSyncCompl 9 } lumSyncBasicComplV10 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB V10 (3.1)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV6, syncSourceGroupV3, syncNotificationGroup } ::= { lumSyncCompl 10 } lumSyncBasicComplV11 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB V11 (8.0)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV6, syncSourceGroupV3, syncNotificationGroup } ::= { lumSyncCompl 11 } lumSyncBasicComplV12 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB V12 (11.0)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV7, syncSourceGroupV3, syncNotificationGroup } ::= { lumSyncCompl 12 } lumSyncBasicComplV13 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB V13 (14.0)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV8, syncSourceGroupV3, syncNotificationGroup, syncSubrackGroup } ::= { lumSyncCompl 13 } lumSyncBasicComplV14 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB V14 (15.0)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV8, syncSourceGroupV3, syncNotificationGroup, syncSubrackGroupV2 } ::= { lumSyncCompl 14 } lumSyncBasicComplV15 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the sync MIB V15 (17.0)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV9, syncSourceGroupV4, syncNotificationGroup, syncDomainGroup, syncBusGroup, syncBoardToDomainGroup } ::= { lumSyncCompl 15 } lumSyncBasicComplV16 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the sync MIB V16 (20.0)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV9, syncSourceGroupV5, syncNotificationGroup, syncDomainGroup, syncBusGroup, syncBoardToDomainGroup } ::= { lumSyncCompl 16 } lumSyncBasicComplV17 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the sync MIB V17 (26.1)." MODULE MANDATORY-GROUPS { syncGeneralGroupV3, syncGroupGroupV9, syncSourceGroupV6, syncNotificationGroup, syncDomainGroup, syncBusGroup, syncBoardToDomainGroup } ::= { lumSyncCompl 17 } END