LUM-PORTDEVICE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DisplayString, DateAndTime, RowStatus, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC lumModules, lumPortdeviceMIB FROM LUM-REG MgmtNameString, SubrackNumber, SlotNumber, BoardOrInterfaceOperStatus, CommandString, FaultStatus, AdminStatus, EnableDisable FROM LUM-TC; lumPortdeviceMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The equipment configuration MIB module for port device. Then tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The Generic group contains generic information and configurations applicable to all port devices. (3) The Equipment group contains information and configurations for each port device. (4) Then Firmware group contains configuration, status and commands for firmware upgrade and other maintenance operations for each port device. " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201507070000Z" -- July 7th 2015 DESCRIPTION "Changes made for release r26: - Added attributes for Channelized Isfp, channel, vlan.." REVISION "201405160000Z" -- May 16th 2014 DESCRIPTION "Changes made for release r23: - Removed misleading text about SelectedPort-mode: Auto " REVISION "201305310000Z" -- May 31st 2013 DESCRIPTION "The initial revision of this module." ::= { lumModules 57 } -- ---------------------------------------------------- -- Conformance area, containing groups and compliance -- specifications. -- ---------------------------------------------------- lumPortdeviceConfs OBJECT IDENTIFIER ::= { lumPortdeviceMIB 1 } lumPortdeviceGroups OBJECT IDENTIFIER ::= { lumPortdeviceConfs 1 } lumPortdeviceCompl OBJECT IDENTIFIER ::= { lumPortdeviceConfs 2 } -- ---------------------------------------------------- -- Root for objects in the portdevice MIB -- ---------------------------------------------------- lumPortdeviceMIBObjects OBJECT IDENTIFIER ::= { lumPortdeviceMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- portDevGeneral OBJECT IDENTIFIER ::= { lumPortdeviceMIBObjects 1 } portDevGenericList OBJECT IDENTIFIER ::= { lumPortdeviceMIBObjects 2 } portDevEquipmentList OBJECT IDENTIFIER ::= { lumPortdeviceMIBObjects 3 } portDevFwList OBJECT IDENTIFIER ::= { lumPortdeviceMIBObjects 4 } portDevIwfList OBJECT IDENTIFIER ::= { lumPortdeviceMIBObjects 5 } portDevIwfPmList OBJECT IDENTIFIER ::= { lumPortdeviceMIBObjects 6 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- PortDeviceEquipmentType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The functional type of the port device. At least one type is defined for each combination of the following properties of the port device: 1 - number of interfaces 2 - type of interfaces 3 - the functionality of the port device (can usually be inferred from the types of interfaces) The application should be able to determine which and how many interfaces should be instantiated from the type. Functional types defined so far: nidGe - Gigabit Ethernet Network Interface Device iSFP-155 - iSFP synchronous transport module 155Mbps iSFP-622 - iSFP synchronous transport module 622Mbps" SYNTAX INTEGER { undefined (0), nidGe (1), -- Gigabit Ethernet Network Interface Device iSfp155 (2), -- iSFP synchronous transport module 155Mbps iSfp622 (3), -- iSFP synchronous transport module 622Mbps iSfpVc12 (4),-- STM-1 Channelized iSFP iSfp2488 (5) -- iSFP synchronous transport module 2488Mbps } PortDeviceVersionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The version type of the port device. undefined (0), -- Device type unknown tpmrPmR11S (1), -- Service OAM Smart SFP ex12NidR22S (3), -- EX12 Transport NID tsop155GeConvPmR12 (4), -- Transparant SONET/SDH over Packet (TSoP) Smart SFP STM-1 tsop622GeConvPmR12 (5), -- Transparant SONET/SDH over Packet (TSoP) Smart SFP STM-4 tpmrPmR15RespS (8), -- Service OAM Smart SFP Responder tpmrPmR15InitS (10), -- Service OAM Smart SFP Initiator ex14NidR10S (11), -- EX14 Transport NID tpmrPmR11L (12), -- Link OAM Smart SFP tsop155GeConvPmR15 (24), -- TSoP Smart SFP OC-3/STM-1 tsop622GeConvPmR15 (25), -- TSoP Smart SFP OC-12/STM-4 ex14NidR20S (31), -- EX14 Transport NID R2.0 ex14NidR40S (32), -- EX14 Transport NID R4.0 tsopStm1eGeConvPmR15 (258), -- TSoP Smart SFP OC-3/STM-1E tpmrPmR20TranspS (259) -- Service OAM Smart SFP Transparant" SYNTAX INTEGER { undefined (0), -- Device type unknown tpmrPmR11S (1), -- Service OAM Smart SFP ex12NidR22S (3), -- EX12 Transport NID tsop155GeConvPmR12 (4), -- Transparant SONET/SDH over Packet (TSoP) Smart SFP STM-1 tsop622GeConvPmR12 (5), -- Transparant SONET/SDH over Packet (TSoP) Smart SFP STM-4 tpmrPmR15RespS (8), -- Service OAM Smart SFP Responder tpmrPmR15InitS (10), -- Service OAM Smart SFP Initiator ex14NidR10S (11), -- EX14 Transport NID tpmrPmR11L (12), -- Link OAM Smart SFP tsop155GeConvPmR15 (24), -- TSoP Smart SFP OC-3/STM-1 tsop622GeConvPmR15 (25), -- TSoP Smart SFP OC-12/STM-4 ex14NidR20S (31), -- EX14 Transport NID R2.0 ex14NidR40S (32), -- EX14 Transport NID R4.0 tsopStm1eGeConvPmR15 (258), -- TSoP Smart SFP OC-3/STM-1E tpmrPmR20TranspS (259) -- Service OAM Smart SFP Transparant } PortDevFwImgState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The states of the firware image on port device. unknown - Can not get image information from port device inactive - Image stored but not activated active - Image stored and activated empty - No image stored" SYNTAX INTEGER { unknown (0), inactive (1), active (2), empty (3) } PortSelection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Selection of active port and alarm suppression Auto(0) Active port is automatically selected based on LOS. CifA(1) CifA active port (Optical), alarms for CifB suppressed. CifB(2) CifB active port (Electrical), alarms for CifA suppressed. " SYNTAX INTEGER { cifa (0), cifb (1), auto (2) } -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- portDevGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { portDevGeneral 1 } portDevGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { portDevGeneral 2 } portDevGeneralGenericTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of generic table " ::= { portDevGeneral 3 } portDevGeneralEquipmentTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of equipment table " ::= { portDevGeneral 4 } portDevGeneralFwTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of firmware table " ::= { portDevGeneral 5 } portDevGeneralIwfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of IWF configuration table " ::= { portDevGeneral 6 } portDevGeneralIwfPmTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of IWF PM table " ::= { portDevGeneral 7 } -- ---------------------------------------------------- -- Generic group -- ---------------------------------------------------- portDevGenericTable OBJECT-TYPE SYNTAX SEQUENCE OF PortDevGenericEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The generic list." ::= { portDevGenericList 1 } portDevGenericEntry OBJECT-TYPE SYNTAX PortDevGenericEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the generic list. " INDEX { portDevGenericIndex } ::= { portDevGenericTable 1 } PortDevGenericEntry ::= SEQUENCE { portDevGenericIndex Unsigned32, portDevGenericName MgmtNameString, portDevGenericSubrack Unsigned32, portDevGenericSlot Unsigned32, portDevGenericAutoDiscoverInterval Unsigned32, portDevGenericCreateNewPortDevice CommandString, portDevGenericRestartPortDevice CommandString, portDevGenericCreateMep CommandString, portDevGenericCreateMeg CommandString, portDevGenericCreateNewPortDeviceAdvanced CommandString } portDevGenericIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { portDevGenericEntry 1 } portDevGenericName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the interface, for example 'generic:1:2', where the first number indicates subrack, the second slot number. " ::= { portDevGenericEntry 2 } portDevGenericSubrack OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The subrack that this port device belongs to. " ::= { portDevGenericEntry 3 } portDevGenericSlot OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot that this port device belongs to. " ::= { portDevGenericEntry 4 } portDevGenericAutoDiscoverInterval OBJECT-TYPE SYNTAX Unsigned32 (0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval at which the auto discovery of port devices runs. 0 to disable auto discovery. The auto discover interval is configured for all port devices of the board. Unit: second. " DEFVAL { 0 } ::= { portDevGenericEntry 5 } portDevGenericCreateNewPortDevice OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Internal command for creating a port device. Device type - type of port device to be created. Port - port of the EMXP board on which to add a port device. VLAN ID - VLAN ID prepended. (NID-GE only) Administrative status - The initial administrative status setting of all channels of this iSFP. (iSFP-VC12 only) Base VLAN ID - The first VLAN ID in a range that will be applied to the channels. The chosen value will be used as VLAN ID on channel 1 and the next VLAN ID in the range will be used on channel 2 and so on. (iSFP-VC12 only) Ether type - Specifies the ether type to be used for the VLAN of each channel on this iSFP. (iSFP-VC12 only) VLAN priority - Specifies the Vlan priority (PCP) of each channel on this iSFP. (iSFP-VC12 only) " ::= { portDevGenericEntry 6 } portDevGenericRestartPortDevice OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Internal command for restarting a port device. Port device - select the device to restart. Restart type - type of restart. Cold Traffic disturbing restart. Warm Non-traffic disturbing restart. " ::= { portDevGenericEntry 7 } portDevGenericCreateMep OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Command for creating a Mep object. MEG - Identifies to which Meg the Mep will be added. Mep type - Local or Remote. MEP identifier - Identifier for the Mep (range 1-8191) Portdevice - The selected Portdevice. " ::= { portDevGenericEntry 8 } portDevGenericCreateMeg OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Create and associate a MEG (MAID) for a Portdevice Identifier - A unique user defined identifier for the MEG. Level - Maintenance domain level. CCM interval - Interval between CCM transmissions to be used by all MEPs in the MA. invalid No CCMs are sent 3.33 ms CCMs are sent every 3 1/3 milliseconds (300Hz) 10 ms CCMs are sent every 10 milliseconds 100 ms CCMs are sent every 100 milliseconds 1 s CCMs are sent every 1 second The supported CCM intervals for Nid (down) MEPs are: 3.33 ms,10 ms, 100 ms, 1 s. Domain format - The format of the domain. none, dnsLikeName, macAddressAndUint and charString are supported. Domain name - Applicable for the format dnsLikeName and charString. MAC - MAC address. Only applicable if domain format is macAddrAndUint. Uint - Unsigned integer. Only applicable if domain format is macAddrAndUint. Association format - The format of the association. primaryVid, charString, unsignedInt16, rfc2865VpnId and ICC are supported. Association name - Applicable for the formats charString and ICC. VPN OUI - VPN authority Organizationally Unique Indentifier. Only applicable if association format is rfc2865VpnId. Example of an VPN OUI is 0A:12:BF. VPN index - VPN index. Only applicable if association format is rfc2865VpnId. Example of an VPN index is 0A:12:BF:11. Uint - Unsigned integer. Only applicable if association format is unsignedInt16. VLAN ID - Primary VLAN ID. Only applicable if association format is primaryVid. " ::= { portDevGenericEntry 9 } portDevGenericCreateNewPortDeviceAdvanced OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Internal command for creating a port device. Device type - type of port device to be created. Port - port of the EMXP board on which to add a port device. VLAN ID - VLAN ID prepended. (NID-GE only) Administrative status - The initial administrative status setting of all channels of this iSFP. (iSFP-VC12 only) Base VLAN ID - The first VLAN ID in a range that will be applied to the channels. The chosen value will be used as VLAN ID on channel 1 and the next VLAN ID in the range will be used on channel 2 and so on. (iSFP-VC12 only) Ether type - Specifies the ether type to be used for the VLAN of each channel on this iSFP. (iSFP-VC12 only) VLAN priority - Specifies the Vlan priority (PCP) of each channel on this iSFP. (iSFP-VC12 only) " ::= { portDevGenericEntry 10 } -- ---------------------------------------------------- -- Equipment information of port device -- ---------------------------------------------------- portDevEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF PortDevEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The equipment list." ::= { portDevEquipmentList 1 } portDevEquipmentEntry OBJECT-TYPE SYNTAX PortDevEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the board list. One entry for each slot. " INDEX { portDevEquipmentIndex } ::= { portDevEquipmentTable 1 } PortDevEquipmentEntry ::= SEQUENCE { portDevEquipmentIndex Unsigned32, portDevEquipmentName MgmtNameString, portDevEquipmentDescr DisplayString, portDevEquipmentLocation DisplayString, portDevEquipmentAdminStatus AdminStatus, portDevEquipmentOperStatus BoardOrInterfaceOperStatus, portDevEquipmentExpectedType PortDeviceEquipmentType, portDevEquipmentActualType PortDeviceEquipmentType, portDevEquipmentFwVersion DisplayString, portDevEquipmentFwUpgradeStatus DisplayString, portDevEquipmentLinkPassThrough EnableDisable, portDevEquipmentSubrack SubrackNumber, portDevEquipmentSlot SlotNumber, portDevEquipmentVlanId Unsigned32, portDevEquipmentRowStatus RowStatus, portDevEquipmentNoDeviceFound FaultStatus, portDevEquipmentMultiDeviceFound FaultStatus, portDevEquipmentDeviceNotManageable FaultStatus, portDevEquipmentDeviceNotReachable FaultStatus, portDevEquipmentConfigurationFault FaultStatus, portDevEquipmentPowerAMissing FaultStatus, portDevEquipmentPowerBMissing FaultStatus, portDevEquipmentInternalReference Unsigned32, portDevEquipmentMacAddress DisplayString, portDevEquipmentLocalPortIndex Unsigned32, portDevEquipmentAdminPowerA AdminStatus, portDevEquipmentAdminPowerB AdminStatus, portDevEquipmentSelectedPort PortSelection, portDevEquipmentDestMacAddress MacAddress, portDevEquipmentDestMacAddressCheck INTEGER, portDevEquipmentDeviceVersionType PortDeviceVersionType, portDevEquipmentActivePort PortSelection, portDevEquipmentDyingGasp FaultStatus, portDevEquipmentLosCsf EnableDisable} portDevEquipmentIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each port device entry. " ::= { portDevEquipmentEntry 1 } portDevEquipmentName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the port device, for example 'nidGe:1:2:1-2:1' where the four numbers indicate in which physical port that the port device is add to and the last number indicates the VLAN ID. The generated name if the port device is an iSFP can for example be 'iSFP:1:2:1-2' where the numbers after 'iSFP:' indicate the port the device is created for. " ::= { portDevEquipmentEntry 2 } portDevEquipmentDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label for the port device. " DEFVAL { "" } ::= { portDevEquipmentEntry 3 } portDevEquipmentLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The location of the port device. " DEFVAL { "" } ::= { portDevEquipmentEntry 4 } portDevEquipmentAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the port device. down - The device should be inactive. Alarms are suppressed. up - The device should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { portDevEquipmentEntry 5 } portDevEquipmentOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the port device. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The interface is operational. " DEFVAL { up } ::= { portDevEquipmentEntry 6 } portDevEquipmentExpectedType OBJECT-TYPE SYNTAX PortDeviceEquipmentType MAX-ACCESS read-create STATUS current DESCRIPTION "The expected port device type. " DEFVAL { undefined } ::= { portDevEquipmentEntry 7 } portDevEquipmentActualType OBJECT-TYPE SYNTAX PortDeviceEquipmentType MAX-ACCESS read-only STATUS current DESCRIPTION "The actual device type. If an unexpected device has been detected this variable can be used to see what type of board has been detected. " ::= { portDevEquipmentEntry 8 } portDevEquipmentFwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the firmware installed on port device. " ::= { portDevEquipmentEntry 9 } portDevEquipmentFwUpgradeStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The progress status of the firmware installation and activation. " ::= { portDevEquipmentEntry 10 } portDevEquipmentLinkPassThrough OBJECT-TYPE SYNTAX EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Link Pass-Through is enabled, i.e. whether the other interface of the Two-Port MAC Relay relays defects to this interface. " DEFVAL { disabled } ::= { portDevEquipmentEntry 11 } portDevEquipmentSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The number of the subrack where the port device is located. " ::= { portDevEquipmentEntry 12 } portDevEquipmentSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The slot where the port device is located. " ::= { portDevEquipmentEntry 13 } portDevEquipmentVlanId OBJECT-TYPE SYNTAX Unsigned32(1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "User specified VLAN ID, which is last number in the port device ID. If no VLAN ID is specified then VLAN ID 0 is assumed. " ::= { portDevEquipmentEntry 14 } portDevEquipmentRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. " ::= { portDevEquipmentEntry 15 } portDevEquipmentNoDeviceFound OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "There is no device present where the expected device type is defined. A(ctivation): Absence of expected device. D(e-activation): Insert expected device. " ::= { portDevEquipmentEntry 16 } portDevEquipmentMultiDeviceFound OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "There is more than one device present where the expected device type is defined. A(ctivation): More than one device is detected. D(e-activation): One device is found or no device is present. " ::= { portDevEquipmentEntry 17 } portDevEquipmentDeviceNotManageable OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware on the device is not supported by the current software version. " ::= { portDevEquipmentEntry 18 } portDevEquipmentDeviceNotReachable OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The portdevice is not reachable by the traffic unit. A(ctivation): When the traffic unit loses contact with the port device. D(e-activation): When the connection is restored. " ::= {portDevEquipmentEntry 19 } portDevEquipmentConfigurationFault OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration stage of the portdevice setup did not successfully finish. A(ctivation): Configuration failure. D(e-activation): Configuration successful. " ::= { portDevEquipmentEntry 20 } portDevEquipmentPowerAMissing OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Lost connection to power module A A(ctivation): When the port device loses contact with the power module A. D(e-activation): When the connection is restored. " ::= {portDevEquipmentEntry 21 } portDevEquipmentPowerBMissing OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Lost connection to power module B A(ctivation): When the port device loses contact with the power module B. D(e-activation): When the connection is restored. " ::= {portDevEquipmentEntry 22 } portDevEquipmentInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= {portDevEquipmentEntry 23 } portDevEquipmentMacAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address of the port device. " ::= { portDevEquipmentEntry 24 } portDevEquipmentLocalPortIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the port that this device is connected to. " ::= { portDevEquipmentEntry 25 } portDevEquipmentAdminPowerA OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Alarms relating to power module A are suppressed. down - Alarms relating to power module A are suppressed. " DEFVAL { down } ::= { portDevEquipmentEntry 26 } portDevEquipmentAdminPowerB OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Alarms relating to power module B are suppressed. down - Alarms relating to power module B are suppressed. " DEFVAL { down } ::= { portDevEquipmentEntry 27 } portDevEquipmentSelectedPort OBJECT-TYPE SYNTAX PortSelection MAX-ACCESS read-write STATUS current DESCRIPTION "Selected active port on the customer interface of the nid. Alarms on non selected ports are suppressed. " DEFVAL { auto } ::= { portDevEquipmentEntry 28 } portDevEquipmentDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The destination MAC address inserted into the transmitted packets. " ::= { portDevEquipmentEntry 29 } portDevEquipmentDestMacAddressCheck OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, for each received packet the destination MAC address is compared with the device MAC address. In case the addresses are not equal, the packet is not processed. " DEFVAL { disabled } ::= { portDevEquipmentEntry 30 } portDevEquipmentDeviceVersionType OBJECT-TYPE SYNTAX PortDeviceVersionType MAX-ACCESS read-only STATUS current DESCRIPTION "The device version type. This variable can be used to see what version of the board has been detected. " ::= { portDevEquipmentEntry 31 } portDevEquipmentActivePort OBJECT-TYPE SYNTAX PortSelection MAX-ACCESS read-only STATUS current DESCRIPTION "Active port on the customer interface of the nid. Alarms on non selected ports are suppressed. " DEFVAL { auto } ::= { portDevEquipmentEntry 32 } portDevEquipmentDyingGasp OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A Dying Gasp is signalled when power is going to be lost on the device. This could possibly indicate a power loss. A(ctivation): A Dying Gasp was received D(e-activation): Communication with the port device was succesfully established " ::= { portDevEquipmentEntry 33 } portDevEquipmentLosCsf OBJECT-TYPE SYNTAX EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Los Csf is enabled. " DEFVAL { disabled } ::= { portDevEquipmentEntry 34 } -- ---------------------------------------------------- -- Firmware group -- ---------------------------------------------------- portDevFwTable OBJECT-TYPE SYNTAX SEQUENCE OF PortDevFwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The firmware list." ::= { portDevFwList 1 } portDevFwEntry OBJECT-TYPE SYNTAX PortDevFwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the firmware list. " INDEX { portDevFwIndex } ::= { portDevFwTable 1 } PortDevFwEntry ::= SEQUENCE { portDevFwIndex Unsigned32, portDevFwSubrack Unsigned32, portDevFwSlot Unsigned32, portDevFwName DisplayString, portDevFwPortDevId Unsigned32, portDevFwImgSlotOneNr Unsigned32, portDevFwImgSlotOneVersion DisplayString, portDevFwImgSlotOneState PortDevFwImgState, portDevFwImgSlotOneDate DisplayString, portDevFwImgSlotTwoNr Unsigned32, portDevFwImgSlotTwoVersion DisplayString, portDevFwImgSlotTwoState PortDevFwImgState, portDevFwImgSlotTwoDate DisplayString, portDevFwInstallFw CommandString, portDevFwActivateFw CommandString, portDevFwGetAllFiles CommandString, portDevFwUpgradeStatus DisplayString } portDevFwIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { portDevFwEntry 1 } portDevFwSubrack OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The subrack that the port device belongs to. " ::= { portDevFwEntry 2 } portDevFwSlot OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot that the port device belongs to. " ::= { portDevFwEntry 3 } portDevFwName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the firmware entry, same as the port device name where the firmware is stored. " ::= { portDevFwEntry 4 } portDevFwPortDevId OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index(aka sdId) assigned to the local device entry, where the firmware is stored in. " ::= { portDevFwEntry 5 } portDevFwImgSlotOneNr OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number of the stored firmware. " DEFVAL { 1 } ::= { portDevFwEntry 6 } portDevFwImgSlotOneVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the firmware that is in slot one. " ::= { portDevFwEntry 7 } portDevFwImgSlotOneState OBJECT-TYPE SYNTAX PortDevFwImgState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the firmware that is in slot one. " ::= { portDevFwEntry 8} portDevFwImgSlotOneDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The date of the firmware that is in slot one. " ::= { portDevFwEntry 9 } portDevFwImgSlotTwoNr OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number of the stored firmware. " DEFVAL { 2 } ::= { portDevFwEntry 10 } portDevFwImgSlotTwoVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the firmware that is in slot two. " ::= { portDevFwEntry 11 } portDevFwImgSlotTwoState OBJECT-TYPE SYNTAX PortDevFwImgState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the firmware that is in slot two. " ::= { portDevFwEntry 12 } portDevFwImgSlotTwoDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The date of the firmware that is in slot two. " ::= { portDevFwEntry 13 } portDevFwInstallFw OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Install firmware on a port device. Portdevice - Select the portdevice to upgrade The Active/Inactive sections show information about firmware available in the two software memory banks, there is one active and one inactive bank. Active firmware - Information about currently active firmware, release and build date. Inactive firmware - Information about firmware in the inactive bank. Action - Install new software, installing new software will upload from the emxp board and install it in the inactive bank. Activate will activate the software that is currently in the inactive bank. Install and Activate will do both, install new software and activate it. File - Select a firmware image to install. The available firmware images are included in the emxp board software package. " ::= { portDevFwEntry 14 } portDevFwActivateFw OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Activate a firmware on a device. " ::= { portDevFwEntry 15 } portDevFwGetAllFiles OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "List all availabe firmware files on the board. " ::= { portDevFwEntry 16 } portDevFwUpgradeStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the firmware installation and activation. " ::= { portDevFwEntry 17 } -- ---------------------------------------------------- -- IWF configuration for iSFP -- ---------------------------------------------------- portDevIwfTable OBJECT-TYPE SYNTAX SEQUENCE OF PortDevIwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The iwf port device list." ::= { portDevIwfList 1 } portDevIwfEntry OBJECT-TYPE SYNTAX PortDevIwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the board list. One entry for each slot. " INDEX { portDevIwfIndex } ::= { portDevIwfTable 1 } PortDevIwfEntry ::= SEQUENCE { portDevIwfIndex Unsigned32, portDevIwfName MgmtNameString, portDevIwfRtpClockSource INTEGER, portDevIwfJitterBufferRecenter INTEGER, portDevIwfInternalReference Unsigned32, portDevIwfLocalPortIndex Unsigned32, portDevIwfLossOfSignal FaultStatus, portDevIwfLossOfFrame FaultStatus, portDevIwfEquipmentFailure FaultStatus, portDevIwfNoTdmPayload FaultStatus, portDevIwfRemotePacketLost FaultStatus, portDevIwfLocalPacketLost FaultStatus, portDevIwfTributaryUnitAlarm FaultStatus, portDevIwfMultiplexSectionAlarm FaultStatus, portDevIwfMultiplexSectionRDI FaultStatus, portDevIwfAdminStatus AdminStatus, portDevIwfOperStatus BoardOrInterfaceOperStatus, portDevIwfDescr DisplayString, portDevIwfEtherType INTEGER, portDevIwfSignalFormat INTEGER, portDevIwfVlanId Unsigned32, portDevIwfVlanPriority Unsigned32, portDevIwfE1ChannelId Unsigned32, portDevIwfE1ChannelKLM DisplayString, portDevIwfDestMacAddress MacAddress } portDevIwfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each port device entry. " ::= { portDevIwfEntry 1 } portDevIwfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the IWF entry. The generated name can for example be 'iSFP:1:2:1-2'where the numbers after 'iSFP:' indicate the port the device is created for. " ::= { portDevIwfEntry 2 } portDevIwfRtpClockSource OBJECT-TYPE SYNTAX INTEGER { ethernet (1), tdm (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The clock source expected to be used for the Real-Time Protocol header timestamps. " ::= { portDevIwfEntry 3 } portDevIwfJitterBufferRecenter OBJECT-TYPE SYNTAX INTEGER { normal (1), recenter (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Function to re-center position of jitter buffer. Setting of this object triggers recentering of the jitter buffer to the default position. Recentering the jitter buffer is a service-affecting operation. This object is merely used to invoke the recentering of the jitter buffer, and its actual value has no meaning. " DEFVAL{ normal } ::= { portDevIwfEntry 4 } portDevIwfInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= {portDevIwfEntry 5 } portDevIwfLocalPortIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the port that this device is connected to. " ::= {portDevIwfEntry 6 } portDevIwfLossOfSignal OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. " ::= { portDevIwfEntry 7 } portDevIwfLossOfFrame OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of frame. " ::= { portDevIwfEntry 8 } portDevIwfEquipmentFailure OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment failure. Catastrophic failure of the hardware of the iSFP device. Replace the faulty hardware. " ::= { portDevIwfEntry 9 } portDevIwfNoTdmPayload OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is generated when the device receives a packet stream with the L-bit set in the Control Word. This bit is set in the far end upon a LOS/LOF/AIS condition. " ::= { portDevIwfEntry 10 } portDevIwfRemotePacketLost OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Packet Lost. Remote end is sending packets but is not recieving any. Local encapsulation may be disabled or local destination MAC address may be wrong or packets are blocked or dropped in network. " ::= { portDevIwfEntry 11 } portDevIwfLocalPacketLost OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Local Packet Lost. No packets are received. Remote encapsulation may be disabled or remote destination MAC address may be wrong or packets are blocked or dropped in network. " ::= { portDevIwfEntry 12 } -- CSOP Stuff , remember to add compliance portDevIwfAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the port device IWF. down - The device should be inactive. Alarms are suppressed. up - The device should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { portDevIwfEntry 13 } portDevIwfOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the IWF. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The interface is operational. " DEFVAL { up } ::= { portDevIwfEntry 14 } portDevIwfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label for the port device iwf. " DEFVAL { "" } ::= { portDevIwfEntry 15 } portDevIwfSignalFormat OBJECT-TYPE SYNTAX INTEGER { other (1), stm1 (2), stm4 (3), stm16 (4), e1 (39)} MAX-ACCESS read-only STATUS current DESCRIPTION "The signal format. " DEFVAL { other } ::= { portDevIwfEntry 16 } portDevIwfEtherType OBJECT-TYPE SYNTAX INTEGER { qTag0x8100 (1), sTag0x88a8 (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the ether type of the VLAN. qTag0x8100 - 802.1Q sTag0x88a8 - 802.1ad Service tag " DEFVAL { sTag0x88a8 } ::= { portDevIwfEntry 17 } portDevIwfVlanId OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "User specified VLAN ID, used to map E1 channel to Vlan. If no VLAN ID is specified then VLAN ID 0 is assumed. " DEFVAL { 0 } ::= { portDevIwfEntry 18 } portDevIwfVlanPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority for the Vlan. " DEFVAL { 0 } ::= { portDevIwfEntry 19 } portDevIwfE1ChannelId OBJECT-TYPE SYNTAX Unsigned32(0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "User specified ChannelId, used to map E1 channel to Vlan. If no Channel ID is specified then 0 is assumed. " DEFVAL { 0 } ::= {portDevIwfEntry 20} portDevIwfE1ChannelKLM OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "K,L,M numbering indicates a fixed mapping of a physical IWF-channel to each VC12. " DEFVAL { "" } ::= { portDevIwfEntry 21 } portDevIwfDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination MAC address inserted into the transmitted packets. " ::= { portDevIwfEntry 22 } portDevIwfTributaryUnitAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "alarm: An TU-AIS signal is detected. ok: The TU-AIS is cleared. " ::= { portDevIwfEntry 23 } portDevIwfMultiplexSectionAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "alarm: An MS-AIS signal is detected. ok: The MS-AIS is cleared. " ::= { portDevIwfEntry 24 } portDevIwfMultiplexSectionRDI OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "alarm: An MS-RDI signal is detected. ok: The MS-RDI is cleared. " ::= { portDevIwfEntry 25 } -- ------------------------------------------------------------- -- IWF PM data for iSFP -- ------------------------------------------------------------- portDevIwfPmTable OBJECT-TYPE SYNTAX SEQUENCE OF PortDevIwfPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the counters of IWF channels of the iSFP." ::= { portDevIwfPmList 1 } portDevIwfPmEntry OBJECT-TYPE SYNTAX PortDevIwfPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects containing the counters of an IWF channel. " INDEX { portDevIwfPmIndex } ::= { portDevIwfPmTable 1 } PortDevIwfPmEntry ::= SEQUENCE { portDevIwfPmIndex Unsigned32, portDevIwfPmName MgmtNameString, portDevIwfPmRxPackets Counter64, portDevIwfPmTxPackets Counter64, portDevIwfPmMalformedPackets Counter64, portDevIwfPmReorderedPackets Counter64, portDevIwfPmMisorderedDroppedPackets Counter64, portDevIwfPmMissingPackets Counter64, portDevIwfPmPlayedOutPackets Counter64, portDevIwfPmJbOverrun Counter64, portDevIwfPmJbUnderrun Counter64, portDevIwfPmReset INTEGER, portDevIwfPmInternalReference Unsigned32, portDevIwfPmE1ChannelId Unsigned32 } portDevIwfPmIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { portDevIwfPmEntry 1 } portDevIwfPmName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the IWF PM entry. The generated name can for example be 'iSFP:1:2:1-2'where the numbers after 'iSFP:' indicate the port the device is created for. " ::= { portDevIwfPmEntry 2 } portDevIwfPmRxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets. " ::= { portDevIwfPmEntry 3 } portDevIwfPmTxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted packets. " ::= { portDevIwfPmEntry 4 } portDevIwfPmMalformedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of malformed packets. " ::= { portDevIwfPmEntry 5 } portDevIwfPmReorderedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of reordered packets. " ::= { portDevIwfPmEntry 6 } portDevIwfPmMisorderedDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped misordered packets. " ::= { portDevIwfPmEntry 7 } portDevIwfPmMissingPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of missing packets. " ::= { portDevIwfPmEntry 8 } portDevIwfPmPlayedOutPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets of which TDM payload is transmitted as received. " ::= { portDevIwfPmEntry 9 } portDevIwfPmJbOverrun OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of jitter buffer overrun packets. " ::= { portDevIwfPmEntry 10 } portDevIwfPmJbUnderrun OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of jitter buffer underrun packets. " ::= { portDevIwfPmEntry 11 } portDevIwfPmReset OBJECT-TYPE SYNTAX INTEGER { normal (1), reset (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting of this object to 'reset' invokes a reset of the counters for this IWF channel. This object is merely used to invoke a reset, and its actual value has no meaning. " ::= { portDevIwfPmEntry 12 } portDevIwfPmInternalReference OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "For internal use only. " DEFVAL { 0 } ::= {portDevIwfPmEntry 13 } portDevIwfPmE1ChannelId OBJECT-TYPE SYNTAX Unsigned32(0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "User specified ChannelId, used to map E1 channel to Vlan. If no Channel ID is specified then 0 is assumed. " DEFVAL { 0 } ::= {portDevIwfPmEntry 14 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- portDevGeneralGroupV1 OBJECT-GROUP OBJECTS { portDevGeneralLastChangeTime, portDevGeneralStateLastChangeTime, portDevGeneralGenericTableSize, portDevGeneralEquipmentTableSize, portDevGeneralFwTableSize, portDevGeneralIwfTableSize, portDevGeneralIwfPmTableSize} STATUS current DESCRIPTION "The general objects." ::= { lumPortdeviceGroups 1 } portDevGenericGroupV1 OBJECT-GROUP OBJECTS { portDevGenericIndex, portDevGenericName, portDevGenericSubrack, portDevGenericSlot, portDevGenericAutoDiscoverInterval, portDevGenericCreateNewPortDevice, portDevGenericCreateMep, portDevGenericCreateMeg, portDevGenericCreateNewPortDevice, portDevGenericRestartPortDevice } STATUS deprecated DESCRIPTION "The generic objects (R21.0)." ::= { lumPortdeviceGroups 2 } portDevGenericGroupV2 OBJECT-GROUP OBJECTS { portDevGenericIndex, portDevGenericName, portDevGenericSubrack, portDevGenericSlot, portDevGenericAutoDiscoverInterval, portDevGenericCreateNewPortDevice, portDevGenericCreateMep, portDevGenericCreateMeg, portDevGenericCreateNewPortDevice, portDevGenericRestartPortDevice, portDevGenericCreateNewPortDeviceAdvanced } STATUS current DESCRIPTION "The generic objects (R30.1)." ::= { lumPortdeviceGroups 13 } portDevEquipmentGroupV1 OBJECT-GROUP OBJECTS { portDevEquipmentIndex, portDevEquipmentName, portDevEquipmentDescr, portDevEquipmentLocation, portDevEquipmentAdminStatus, portDevEquipmentOperStatus, portDevEquipmentExpectedType, portDevEquipmentActualType, portDevEquipmentFwVersion, portDevEquipmentLinkPassThrough, portDevEquipmentSelectedPort, portDevEquipmentSubrack, portDevEquipmentSlot, portDevEquipmentVlanId, portDevEquipmentRowStatus, portDevEquipmentNoDeviceFound, portDevEquipmentMultiDeviceFound, portDevEquipmentDeviceNotManageable, portDevEquipmentDeviceNotReachable, portDevEquipmentConfigurationFault, portDevEquipmentPowerAMissing, portDevEquipmentPowerBMissing, portDevEquipmentInternalReference, portDevEquipmentMacAddress, portDevEquipmentLocalPortIndex, portDevEquipmentAdminPowerA, portDevEquipmentAdminPowerB, portDevEquipmentDestMacAddress, portDevEquipmentDestMacAddressCheck, portDevEquipmentFwUpgradeStatus} STATUS deprecated DESCRIPTION "The equipment objects (R21.0)." ::= { lumPortdeviceGroups 3 } portDevFwGroupV1 OBJECT-GROUP OBJECTS { portDevFwIndex, portDevFwSubrack, portDevFwSlot, portDevFwName, portDevFwPortDevId, portDevFwImgSlotOneNr, portDevFwImgSlotOneVersion, portDevFwImgSlotOneState, portDevFwImgSlotOneDate, portDevFwImgSlotTwoNr, portDevFwImgSlotTwoVersion, portDevFwImgSlotTwoState, portDevFwImgSlotTwoDate, portDevFwInstallFw, portDevFwActivateFw, portDevFwGetAllFiles, portDevFwUpgradeStatus} STATUS current DESCRIPTION "The firmware objects (R21.0)." ::= { lumPortdeviceGroups 4 } portDevIwfGroupV1 OBJECT-GROUP OBJECTS { portDevIwfIndex, portDevIwfName, portDevIwfRtpClockSource, portDevIwfJitterBufferRecenter, portDevIwfInternalReference, portDevIwfLocalPortIndex, portDevIwfLossOfSignal, portDevIwfLossOfFrame, portDevIwfEquipmentFailure, portDevIwfNoTdmPayload, portDevIwfRemotePacketLost, portDevIwfLocalPacketLost } STATUS deprecated DESCRIPTION "The Port Device IWF objects (R21.0)." ::= { lumPortdeviceGroups 5 } portDevIwfPmGroupV1 OBJECT-GROUP OBJECTS { portDevIwfPmIndex, portDevIwfPmName, portDevIwfPmRxPackets, portDevIwfPmTxPackets, portDevIwfPmMalformedPackets, portDevIwfPmReorderedPackets, portDevIwfPmMisorderedDroppedPackets, portDevIwfPmMissingPackets, portDevIwfPmPlayedOutPackets, portDevIwfPmJbOverrun, portDevIwfPmJbUnderrun, portDevIwfPmReset, portDevIwfPmInternalReference} STATUS deprecated DESCRIPTION "The Port Device IWF PM objects (R21.0)." ::= { lumPortdeviceGroups 6 } portDevEquipmentGroupV2 OBJECT-GROUP OBJECTS { portDevEquipmentIndex, portDevEquipmentName, portDevEquipmentDescr, portDevEquipmentLocation, portDevEquipmentAdminStatus, portDevEquipmentOperStatus, portDevEquipmentExpectedType, portDevEquipmentActualType, portDevEquipmentFwVersion, portDevEquipmentLinkPassThrough, portDevEquipmentSubrack, portDevEquipmentSlot, portDevEquipmentVlanId, portDevEquipmentRowStatus, portDevEquipmentNoDeviceFound, portDevEquipmentMultiDeviceFound, portDevEquipmentDeviceNotManageable, portDevEquipmentDeviceNotReachable, portDevEquipmentConfigurationFault, portDevEquipmentPowerAMissing, portDevEquipmentPowerBMissing, portDevEquipmentInternalReference, portDevEquipmentMacAddress, portDevEquipmentLocalPortIndex, portDevEquipmentAdminPowerA, portDevEquipmentAdminPowerB, portDevEquipmentDestMacAddress, portDevEquipmentDestMacAddressCheck, portDevEquipmentFwUpgradeStatus, portDevEquipmentDeviceVersionType, portDevEquipmentSelectedPort, portDevEquipmentActivePort} STATUS deprecated DESCRIPTION "The equipment objects (R22.0)." ::= { lumPortdeviceGroups 7 } portDevEquipmentGroupV3 OBJECT-GROUP OBJECTS { portDevEquipmentIndex, portDevEquipmentName, portDevEquipmentDescr, portDevEquipmentLocation, portDevEquipmentAdminStatus, portDevEquipmentOperStatus, portDevEquipmentExpectedType, portDevEquipmentActualType, portDevEquipmentFwVersion, portDevEquipmentFwUpgradeStatus, portDevEquipmentLinkPassThrough, portDevEquipmentSubrack, portDevEquipmentSlot, portDevEquipmentVlanId, portDevEquipmentRowStatus, portDevEquipmentNoDeviceFound, portDevEquipmentMultiDeviceFound, portDevEquipmentDeviceNotManageable, portDevEquipmentDeviceNotReachable, portDevEquipmentConfigurationFault, portDevEquipmentPowerAMissing, portDevEquipmentPowerBMissing, portDevEquipmentInternalReference, portDevEquipmentMacAddress, portDevEquipmentLocalPortIndex, portDevEquipmentAdminPowerA, portDevEquipmentAdminPowerB, portDevEquipmentSelectedPort, portDevEquipmentDestMacAddress, portDevEquipmentDestMacAddressCheck, portDevEquipmentDeviceVersionType, portDevEquipmentActivePort, portDevEquipmentDyingGasp} STATUS deprecated DESCRIPTION "The equipment objects (R23.0)." ::= { lumPortdeviceGroups 8 } portDevIwfGroupV2 OBJECT-GROUP OBJECTS { portDevIwfIndex, portDevIwfName, portDevIwfRtpClockSource, portDevIwfJitterBufferRecenter, portDevIwfInternalReference, portDevIwfLocalPortIndex, portDevIwfLossOfSignal, portDevIwfLossOfFrame, portDevIwfEquipmentFailure, portDevIwfNoTdmPayload, portDevIwfRemotePacketLost, portDevIwfLocalPacketLost, portDevIwfTributaryUnitAlarm, portDevIwfMultiplexSectionAlarm, portDevIwfMultiplexSectionRDI, portDevIwfAdminStatus, portDevIwfOperStatus, portDevIwfDescr, portDevIwfEtherType, portDevIwfSignalFormat, portDevIwfVlanId, portDevIwfVlanPriority, portDevIwfE1ChannelId, portDevIwfE1ChannelKLM, portDevIwfDestMacAddress } STATUS current DESCRIPTION "The Port Device IWF objects (R26.0)." ::= { lumPortdeviceGroups 9 } portDevIwfPmGroupV2 OBJECT-GROUP OBJECTS { portDevIwfPmIndex, portDevIwfPmName, portDevIwfPmRxPackets, portDevIwfPmTxPackets, portDevIwfPmMalformedPackets, portDevIwfPmReorderedPackets, portDevIwfPmMisorderedDroppedPackets, portDevIwfPmMissingPackets, portDevIwfPmPlayedOutPackets, portDevIwfPmJbOverrun, portDevIwfPmJbUnderrun, portDevIwfPmReset, portDevIwfPmInternalReference, portDevIwfPmE1ChannelId} STATUS current DESCRIPTION "The Port Device IWF PM objects (R26.0)." ::= { lumPortdeviceGroups 10 } portDevEquipmentGroupV4 OBJECT-GROUP OBJECTS { portDevEquipmentIndex, portDevEquipmentName, portDevEquipmentDescr, portDevEquipmentLocation, portDevEquipmentAdminStatus, portDevEquipmentOperStatus, portDevEquipmentExpectedType, portDevEquipmentActualType, portDevEquipmentFwVersion, portDevEquipmentFwUpgradeStatus, portDevEquipmentLinkPassThrough, portDevEquipmentSubrack, portDevEquipmentSlot, portDevEquipmentVlanId, portDevEquipmentRowStatus, portDevEquipmentNoDeviceFound, portDevEquipmentMultiDeviceFound, portDevEquipmentDeviceNotManageable, portDevEquipmentDeviceNotReachable, portDevEquipmentConfigurationFault, portDevEquipmentPowerAMissing, portDevEquipmentPowerBMissing, portDevEquipmentInternalReference, portDevEquipmentMacAddress, portDevEquipmentLocalPortIndex, portDevEquipmentAdminPowerA, portDevEquipmentAdminPowerB, portDevEquipmentSelectedPort, portDevEquipmentDestMacAddressCheck, portDevEquipmentDeviceVersionType, portDevEquipmentActivePort, portDevEquipmentDyingGasp} STATUS deprecated DESCRIPTION "The equipment objects (R26.0)." ::= { lumPortdeviceGroups 11 } portDevEquipmentGroupV5 OBJECT-GROUP OBJECTS { portDevEquipmentIndex, portDevEquipmentName, portDevEquipmentDescr, portDevEquipmentLocation, portDevEquipmentAdminStatus, portDevEquipmentOperStatus, portDevEquipmentExpectedType, portDevEquipmentActualType, portDevEquipmentFwVersion, portDevEquipmentFwUpgradeStatus, portDevEquipmentLinkPassThrough, portDevEquipmentSubrack, portDevEquipmentSlot, portDevEquipmentVlanId, portDevEquipmentRowStatus, portDevEquipmentNoDeviceFound, portDevEquipmentMultiDeviceFound, portDevEquipmentDeviceNotManageable, portDevEquipmentDeviceNotReachable, portDevEquipmentConfigurationFault, portDevEquipmentPowerAMissing, portDevEquipmentPowerBMissing, portDevEquipmentInternalReference, portDevEquipmentMacAddress, portDevEquipmentLocalPortIndex, portDevEquipmentAdminPowerA, portDevEquipmentAdminPowerB, portDevEquipmentSelectedPort, portDevEquipmentDestMacAddressCheck, portDevEquipmentDeviceVersionType, portDevEquipmentActivePort, portDevEquipmentDyingGasp, portDevEquipmentLosCsf} STATUS current DESCRIPTION "The equipment objects (R28.0)." ::= { lumPortdeviceGroups 12 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumPortdeviceBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the port device MIB. (R21.0)." MODULE MANDATORY-GROUPS { portDevGeneralGroupV1, portDevGenericGroupV1, portDevEquipmentGroupV1, portDevFwGroupV1, portDevIwfGroupV1, portDevIwfPmGroupV1 } ::= { lumPortdeviceCompl 1 } lumPortdeviceBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the port device MIB. (R22.0)." MODULE MANDATORY-GROUPS { portDevGeneralGroupV1, portDevGenericGroupV1, portDevEquipmentGroupV2, portDevFwGroupV1, portDevIwfGroupV1, portDevIwfPmGroupV1 } ::= { lumPortdeviceCompl 2 } lumPortdeviceBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the port device MIB. (R23.0)." MODULE MANDATORY-GROUPS { portDevGeneralGroupV1, portDevGenericGroupV1, portDevEquipmentGroupV3, portDevFwGroupV1, portDevIwfGroupV1, portDevIwfPmGroupV1 } ::= { lumPortdeviceCompl 3 } lumPortdeviceBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the port device MIB. (R26.0)." MODULE MANDATORY-GROUPS { portDevGeneralGroupV1, portDevGenericGroupV1, portDevEquipmentGroupV4, portDevFwGroupV1, portDevIwfGroupV2, portDevIwfPmGroupV2 } ::= { lumPortdeviceCompl 4 } lumPortdeviceBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the port device MIB. (R28.0)." MODULE MANDATORY-GROUPS { portDevGeneralGroupV1, portDevGenericGroupV1, portDevEquipmentGroupV5, portDevFwGroupV1, portDevIwfGroupV2, portDevIwfPmGroupV2 } ::= { lumPortdeviceCompl 5 } lumPortdeviceBasicComplV6 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the port device MIB. (R30.1)." MODULE MANDATORY-GROUPS { portDevGeneralGroupV1, portDevGenericGroupV2, portDevEquipmentGroupV5, portDevFwGroupV1, portDevIwfGroupV2, portDevIwfPmGroupV2 } ::= { lumPortdeviceCompl 6 } END