LUM-MULTIRATE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, NOTIFICATION-TYPE, Gauge32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TestAndIncr, DisplayString, DateAndTime FROM SNMPv2-TC lumModules, lumMultirateMIB FROM LUM-REG FaultStatus, MgmtNameString, SubrackNumber, SlotNumber, PortNumber, BoardOrInterfaceOperStatus, BoardOrInterfaceAdminStatus, CommandString, LambdaFrequency, SignalFormat, TrxMedia, ObjectProperty FROM LUM-TC; lumMultirateMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The multi-bitrate client interface MIB. - General - Multi bit-rate client interfaces " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201601110000Z" -- Jan 11th 2016 DESCRIPTION "Added default value notPresent for operStatus." REVISION "201104120000Z" -- April 12th 2011 DESCRIPTION "Added new compliance group to mark adding write support for trail trace." REVISION "200711120000Z" -- November 12th 2007 DESCRIPTION "Added mrtIfHighSpeed2 to mrtIfGroupV16." REVISION "200301290000Z" -- January 29th 2003 DESCRIPTION "Added mrtIfTruncVc4Status." REVISION "200212040000Z" -- December 4th 2002 DESCRIPTION "Added trace identifier attributes in the multirate interface table." REVISION "200210010000Z" -- October 1st 2002 DESCRIPTION "Added VC-4 id." REVISION "200206040000Z" -- June 4th 2002 DESCRIPTION "Added signalStatus and related notifications." REVISION "200205150000Z" -- May 15th 2002 DESCRIPTION "Added PM alarm thresholds." REVISION "200201170000Z" -- January 17th 2002 DESCRIPTION "Added AU4 alarm indication signal and loss of pointer." REVISION "200112030000Z" -- December 3rd 2001 DESCRIPTION "Moved admin and operStatus definitions to LUM-TC" REVISION "200111090000Z" -- November 9th 2001 DESCRIPTION "lossOfLock is now called bitrateMismatch. Added laser bias meter and threshold. Added J0 path trace." REVISION "200110300000Z" -- October 30th 2001 DESCRIPTION "testAndIncr and MIB-versions hidden - not supported yet." REVISION "200110220000Z" -- October 22nd 2001 DESCRIPTION "Added mrtIfRx port, changed mrtPort to mrtTxPort." REVISION "200110180000Z" -- October 18th 2001 DESCRIPTION "Changed aliases to the 'long'-version for all faultStatus objects." REVISION "200110110000Z" -- October 11th 2001 DESCRIPTION "Renamed TRANSPONDER to MULTIRATE." REVISION "200109050000Z" -- September 5th 2001 DESCRIPTION "Added lossOfLock." REVISION "200108140000Z" -- August 14th 2001 DESCRIPTION "Added alias. Removed lambda info from mrtIfEntry. Added compliance info." REVISION "200108080000Z" -- August 9th 2001 DESCRIPTION "The initial revision of this module." ::= { lumModules 13 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumMultirateConfs OBJECT IDENTIFIER ::= { lumMultirateMIB 1 } lumMultirateGroups OBJECT IDENTIFIER ::= { lumMultirateConfs 1 } lumMultirateCompl OBJECT IDENTIFIER ::= { lumMultirateConfs 2 } -- ---------------------------------------------------- -- Root for objects in the multirate MIB -- ---------------------------------------------------- lumMultirateMIBObjects OBJECT IDENTIFIER ::= { lumMultirateMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- mrtGeneral OBJECT IDENTIFIER ::= { lumMultirateMIBObjects 1 } mrtIfList OBJECT IDENTIFIER ::= { lumMultirateMIBObjects 2 } lumentisMrtNotifications OBJECT IDENTIFIER ::= { lumMultirateMIBObjects 3 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- mrtGeneralTestAndIncr OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "Protection against simultaneous access from multiple managers. See SNMPv2-TC. " DEFVAL { 1 } ::= { mrtGeneral 1 } mrtGeneralMibSpecVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MIB specification version. " DEFVAL { "" } ::= { mrtGeneral 2 } mrtGeneralMibImplVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MIB implementation version. " DEFVAL { "" } ::= { mrtGeneral 3 } mrtGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { mrtGeneral 4 } mrtGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { mrtGeneral 5 } mrtGeneralMrtIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of table " ::= { mrtGeneral 6 } -- ---------------------------------------------------- -- Multi-bit rate client interfaces -- ---------------------------------------------------- mrtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MrtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface list." ::= { mrtIfList 1 } mrtIfEntry OBJECT-TYPE SYNTAX MrtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the interface list. " INDEX { mrtIfIndex } ::= { mrtIfTable 1 } MrtIfEntry ::= SEQUENCE { mrtIfIndex Unsigned32, mrtIfName MgmtNameString, mrtIfDescr DisplayString, mrtIfSubrack SubrackNumber, mrtIfSlot SlotNumber, mrtIfTxPort PortNumber, mrtIfRxPort PortNumber, mrtIfInvPhysIndexOrZero Unsigned32, mrtIfFormat SignalFormat, mrtIfHighSpeed Gauge32, mrtIfHighSpeedMin Gauge32, mrtIfHighSpeedMax Gauge32, mrtIfPowerLevel Integer32, mrtIfPowerLevelHighThreshold Integer32, mrtIfPowerLevelLowThreshold Integer32, mrtIfLaserStatus INTEGER, mrtIfAdminStatus BoardOrInterfaceAdminStatus, mrtIfOperStatus BoardOrInterfaceOperStatus, mrtIfLossOfSignal FaultStatus, mrtIfReceivedPowerHigh FaultStatus, mrtIfReceivedPowerLow FaultStatus, mrtIfLaserBiasHigh FaultStatus, mrtIfErroredSeconds FaultStatus, mrtIfSeverelyErroredSeconds FaultStatus, mrtIfBackgroundBlockErrors FaultStatus, mrtIfUnavailableSeconds FaultStatus, mrtIfLossOfFrame FaultStatus, mrtIfMsAlarmIndicationSignalC2W FaultStatus, mrtIfRemoteDefectIndication FaultStatus, mrtIfLossOfSync FaultStatus, mrtIfBitrateMismatch FaultStatus, mrtIfLaserBias Unsigned32, mrtIfLaserBiasThreshold Unsigned32, mrtIfJ0PathTrace OCTET STRING, mrtIfAuAlarmIndicationSignalW2C FaultStatus, mrtIfAuLossOfPointerW2C FaultStatus, mrtIfTxSignalStatus INTEGER, mrtIfTruncVc4 Unsigned32, mrtIfAuAlarmIndicationSignalC2W FaultStatus, mrtIfAuLossOfPointerC2W FaultStatus, mrtIfTraceIntrusionMode INTEGER, mrtIfTraceTransmitted DisplayString, mrtIfTraceReceived DisplayString, mrtIfTraceExpected DisplayString, mrtIfTraceAlarmMode INTEGER, mrtIfTraceMismatch FaultStatus, mrtIfTruncVc4Status INTEGER, mrtIfMsAlarmIndicationSignalW2C FaultStatus, mrtIfForwardAls INTEGER, mrtIfSuppressRemoteAlarms INTEGER, mrtIfConfigurationCommand CommandString, mrtIfTrxCodeMismatch FaultStatus, mrtIfTrxBitrateUnavailable FaultStatus, mrtIfTrxMissing FaultStatus, mrtIfTrxClass DisplayString, mrtIfEntityId Unsigned32, mrtIfTransmitterFailed FaultStatus, mrtIfReceiverSensitivity Integer32, mrtIfPowerLevelLowRelativeThreshold Integer32, mrtIfFarEndLoopback INTEGER, mrtIfConfigureModeCommand CommandString, mrtIfTrxMode INTEGER, mrtIfExpectedTxFrequency LambdaFrequency, mrtIfTxFrequency LambdaFrequency, mrtIfUnexpectedTxFrequency FaultStatus, mrtIfIllegalFrequency FaultStatus, mrtIfTrxMedia TrxMedia, mrtIfTrxMediaMismatch FaultStatus, mrtIfLaserForcedOn INTEGER, mrtIfTruncAutoNegotiationMode INTEGER, mrtIfObjectProperty ObjectProperty, mrtIfTxPowerLevel Integer32, mrtIfLaserTempActual Integer32, mrtIfHighSpeed2 Gauge32, mrtIfRxSignalStatus INTEGER } mrtIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { mrtIfEntry 1 } mrtIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the interface, for example 'mrti1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: mrti:s:s:p - Multirate client interface stm1:s:s:p - STM-1/OC3 client interface stm4:s:s:p - STM-4/OC12 client interface " ::= { mrtIfEntry 2 } mrtIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. This attribute can be written via SNMP. " DEFVAL { "" } ::= { mrtIfEntry 3 } mrtIfSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { mrtIfEntry 4 } mrtIfSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { mrtIfEntry 5 } mrtIfTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the TX-side of the interface is located. " ::= { mrtIfEntry 6 } mrtIfRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the RX-side of the interface is located. " ::= { mrtIfEntry 7 } mrtIfInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { mrtIfEntry 8 } mrtIfFormat OBJECT-TYPE SYNTAX SignalFormat MAX-ACCESS read-create STATUS current DESCRIPTION "The expected signal format. The default value is board dependent. For information about the default value for this particular board, please refer to the user manual. " DEFVAL { stm16 } ::= { mrtIfEntry 9 } mrtIfHighSpeed OBJECT-TYPE SYNTAX Gauge32 (125..2500) MAX-ACCESS read-create STATUS current DESCRIPTION "The expected signal bit rate in units of 1,000,000 bits (Mb) per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. " DEFVAL { 2500 } ::= { mrtIfEntry 10 } mrtIfHighSpeedMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minmum speed in units of 1,000,000 bits (Mb) per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. " ::= { mrtIfEntry 11 } mrtIfHighSpeedMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. " ::= { mrtIfEntry 12 } mrtIfPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received power level in units of 0.1 dBm. " ::= { mrtIfEntry 13 } mrtIfPowerLevelHighThreshold OBJECT-TYPE SYNTAX Integer32 (-280..0) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. The 'stm4' and 'stm1' ranges are applicable for muxponder interfaces. " DEFVAL { -80 } ::= { mrtIfEntry 14 } mrtIfPowerLevelLowThreshold OBJECT-TYPE SYNTAX Integer32 (-280..0) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. The 'stm4' and 'stm1' ranges are applicable for muxponder interfaces. " DEFVAL { -200 } ::= { mrtIfEntry 15 } mrtIfLaserStatus OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the laser. off - The laser is turned off. on - The laser is turned on. " ::= { mrtIfEntry 16 } mrtIfAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. This attribute can be written via SNMP. " DEFVAL { up } ::= { mrtIfEntry 17 } mrtIfOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The interface is operational. " DEFVAL { notPresent } ::= { mrtIfEntry 18 } mrtIfLossOfSignal OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. " ::= { mrtIfEntry 19 } mrtIfReceivedPowerHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Received power level is too high. Applicable for all signal formats. A: The received power level exceeds the the built-in overload threshold. D: The received power level is 0.5 dB below the overload threshold. " ::= { mrtIfEntry 20 } mrtIfReceivedPowerLow OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Received power level low threshold exceeded. Applicable for all signal formats. A: The received power level is below the associated threshold. D: The received power level is 0.5 dB above the threshold. " ::= { mrtIfEntry 21 } mrtIfLaserBiasHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Laser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated threshold. " ::= { mrtIfEntry 22 } mrtIfErroredSeconds OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Note: This attribute is deprecated! Errored seconds threshold exceeded. A: The number of errored seconds (ES) during a period exceeds the associated threshold. D: At the start of a new period. " ::= { mrtIfEntry 23 } mrtIfSeverelyErroredSeconds OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Note: This attribute is deprecated! Severely errored seconds (SES) threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At the start of a new period. " ::= { mrtIfEntry 24 } mrtIfBackgroundBlockErrors OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Note: This attribute is deprecated! Background block errors (BBE) threshold exceeded. A: The number of errors during a period exceeds the associated threshold. D: At the start of a new period. " ::= { mrtIfEntry 25 } mrtIfUnavailableSeconds OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Note: This attribute is deprecated! Unavailable seconds (UAS) threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start of a new period. " ::= { mrtIfEntry 26 } mrtIfLossOfFrame OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of frame. Applicable for SDH/Sonet signal formats. A: SDH frame can not be located. D: SDH frame is located. " ::= { mrtIfEntry 27 } mrtIfMsAlarmIndicationSignalC2W OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "MS Alarm indication signal (MS-AIS) on the client side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered. " ::= { mrtIfEntry 28 } mrtIfRemoteDefectIndication OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Remote defect indication. Applicable for SDH/Sonet signal formats. A: RDI indication (in SDH frame) active. D: RDI indication inactive. " ::= { mrtIfEntry 29 } mrtIfLossOfSync OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of sync (GbE). Applicable for GbE signal formats. A: GbE 'frame' can not be located. D: GbE 'frame' is located. " ::= { mrtIfEntry 30 } mrtIfBitrateMismatch OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bitrate mismatch (Other). Applicable for other signal formats. D: The interface is unable to lock to the inserted signal. D: The interface is able to lock to the inserted signal. " ::= { mrtIfEntry 31 } mrtIfLaserBias OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measures laser bias current value in tenths of mA (0.1 mA). " ::= { mrtIfEntry 32 } mrtIfLaserBiasThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%. " DEFVAL { 200 } ::= { mrtIfEntry 33 } mrtIfJ0PathTrace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The recevied J0 path trace string. Applicable for SDH/Sonet signal formats. " ::= { mrtIfEntry 34 } mrtIfAuAlarmIndicationSignalW2C OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm indication signal (AIS) on the trunk-side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered. " ::= { mrtIfEntry 35 } mrtIfAuLossOfPointerW2C OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of pointer detected on the trunk-side. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH signal recovered. " ::= { mrtIfEntry 36 } mrtIfTxSignalStatus OBJECT-TYPE SYNTAX INTEGER { down (1), degraded (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { mrtIfEntry 37 } mrtIfTruncVc4 OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "States which VC4 in the STM-16 frame that the interface is connected to. 0 means unconnected, i.e. the signal passes through. (This may cause a loop depending on network topology.) For an STM-1 interface the VC4 to be dropped is identified. For an STM-4 interface the the first VC4 in the 'quartet' is identified. Legal values are 1, 5, 9, 13. This attribute can be written via SNMP. " DEFVAL { 0 } ::= { mrtIfEntry 38 } mrtIfAuAlarmIndicationSignalC2W OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm indication signal (AIS) on the client-side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered. " ::= { mrtIfEntry 39 } mrtIfAuLossOfPointerC2W OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of pointer detected on the client-side. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH signal recovered. " ::= { mrtIfEntry 40 } mrtIfTraceIntrusionMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates wether the trace identifier should be inserted in the transmitted signal. disabled - The trace identifier is taken from the recevied signal if possible. enabled - The trace identifier set is inserted in the transmitted signal. " DEFVAL { disabled } ::= { mrtIfEntry 41 } mrtIfTraceTransmitted OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The trace identifier to be transmitted from this interface. Set to empty string for default value: ::: Note that only the last part of the address is used. " DEFVAL { "" } ::= { mrtIfEntry 42 } mrtIfTraceReceived OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The received trace identifier for this interface. " ::= { mrtIfEntry 43 } mrtIfTraceExpected OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Trace identifier used for matching against the received trace identifier. " DEFVAL { "" } ::= { mrtIfEntry 44 } mrtIfTraceAlarmMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls if the trace identifier mismatch alarm should be raised. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier differs from the received trace identifier. " DEFVAL { disabled } ::= { mrtIfEntry 45 } mrtIfTraceMismatch OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the expected trace identifier differs from the received trace identifier. A: The received trace identifier differs from the expected trace identifier. D: The identifiers match. " ::= { mrtIfEntry 46 } mrtIfTruncVc4Status OBJECT-TYPE SYNTAX INTEGER { undefined (0), addDrop (1), passThrough (2), unconnected (3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Shows the status of the VC4(s) that this port is connected to. undefined - used when the port is not connected to any VC4. Also used when an STM4 port is VC4s that have conflicting modes. addDrop - the VC4 is connected to this port (normal) passThrough - Should not occur unconnected - the vc4 is unused. Set it to nodeUsed to complete the add/drop. " ::= { mrtIfEntry 47 } mrtIfMsAlarmIndicationSignalW2C OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "MS Alarm indication signal (MS-AIS) on the trunc side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered. " ::= { mrtIfEntry 48 } mrtIfForwardAls OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward Automatic Laser Shut-down. Decides the behaviour of the client laser (W2C) when the trunc signal is defected. disabled - The laser is NOT turned off at failure. enabled - The laser is turned off at failure. " DEFVAL { disabled } ::= { mrtIfEntry 49 } mrtIfSuppressRemoteAlarms OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Suppress AIS and RDI in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are suppressed. " DEFVAL { disabled } ::= { mrtIfEntry 50 } mrtIfConfigurationCommand OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Command to change the signal format and, if applicable, also the speed. Synopsis: configure [ []] If no arguments are given, the user will be prompted. tpQMr, tpQMri, tpqmp: If speed is set manually, the Bitrate unavailable alarm will not appear even if the there is a difference between the transceiver speed and the chosen speed. " ::= { mrtIfEntry 51 } mrtIfTrxCodeMismatch OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The inserted transceiver does not have a legal manufacturer code. A: A transceiver with illegal code is inserted. D: The transceiver with illegal code is removed. " ::= { mrtIfEntry 52 } mrtIfTrxBitrateUnavailable OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The inserted transceiver does not support the requested bit rate. A: A transceiver with other supported bit rate than the requested bit rate is inserted. D: The transceiver with the non-requested bit rate is removed, or the object is reconfigured. " ::= { mrtIfEntry 53 } mrtIfTrxMissing OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An expected transceiver is missing. A: An expected transceiver is missing. D: The missing transceiver is inserted. " ::= { mrtIfEntry 54 } mrtIfTrxClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "String that describes the transceiver class. " DEFVAL { "" } ::= { mrtIfEntry 55 } mrtIfEntityId OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index in entity table. -- Only used for notifications " ::= { mrtIfEntry 56 } mrtIfTransmitterFailed OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The transceiver HW has detected a failure in the transmitter part. A: The transmitter has failed D: The transmitter is OK again " ::= { mrtIfEntry 57 } mrtIfReceiverSensitivity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm. " ::= { mrtIfEntry 58 } mrtIfPowerLevelLowRelativeThreshold OBJECT-TYPE SYNTAX Integer32 (-50..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity. " DEFVAL { 30 } ::= { mrtIfEntry 59 } mrtIfFarEndLoopback OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Loop the client TX signal back to the client RX. disabled - the signal is not looped enabled - the signal is looped. " DEFVAL { disabled } ::= { mrtIfEntry 60 } mrtIfConfigureModeCommand OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Command to change the TRX mode: CLIENT or LINE. Also select the TRX media. Synopsis: configureMode [] [] If no arguments are given, the user will be prompted. " ::= { mrtIfEntry 61 } mrtIfTrxMode OBJECT-TYPE SYNTAX INTEGER { client (1), line (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Shows if the port is configured as: - normal CLIENT interface connected to non-Transmode or non-Infinera client equipment, with non-colored, or colored TRXes. - a LINE interface connected to other Transmode or Infinera equipment, typically with WDM TRXes. This should be used in cascade connections with tpQMR. Important1: Do not use 'line' mode unless you really have to. Important2: If this port constitute the edge of the Transmode/Infinera supplied network, and it is connected to other client equipment, then you must use 'client' mode in order to make use of the circuit supervision in TNM. " DEFVAL { client } ::= { mrtIfEntry 62 } mrtIfExpectedTxFrequency OBJECT-TYPE SYNTAX LambdaFrequency MAX-ACCESS read-write STATUS current DESCRIPTION "The expected frequency given in hundreds of GHz (0.01 GHz). " DEFVAL { 0 } ::= { mrtIfEntry 63 } mrtIfTxFrequency OBJECT-TYPE SYNTAX LambdaFrequency MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted frequency given in hundreds of GHz (0.01 GHz). " ::= { mrtIfEntry 64 } mrtIfUnexpectedTxFrequency OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency does not match the actual frequency. D: The configured frequency matches the actual frequency. " ::= { mrtIfEntry 65 } mrtIfIllegalFrequency OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency supported by the transceiver is not recognized by the system. A: Invalid or unknown frequency information is detected in the (pluggable) transceiver or board production data. D: The (pluggable) transceiver or board is replaced. " ::= { mrtIfEntry 66 } mrtIfTrxMedia OBJECT-TYPE SYNTAX TrxMedia MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the media and capability of the TRX. " DEFVAL { optical } ::= { mrtIfEntry 67 } mrtIfTrxMediaMismatch OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The TRX media does not match the expected one. A: Invalid or mismatching trx media is detected. D: The (pluggable) transceiver or board is replaced, or the configuration is changed. " ::= { mrtIfEntry 68 } mrtIfLaserForcedOn OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the laser is on regardless of whether there is a trunc signal present or not. disabled - the laser is only on when there is a trunc signal. enabled - the laser is always on. This is intended to be used at installation to generate light on the client side for the QMR board to verify the connectivity. " DEFVAL { disabled } ::= { mrtIfEntry 69 } mrtIfTruncAutoNegotiationMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Decides whether auto negotiation shall be performed over the trunc connection. This is applicable when the terminating node at the other side of the trunc is configured as follows: - it has an optical client interface - its client equipment (e.g. a router) requires auto negotiation. disabled - Do not perform auto neg over the trunc enabled - Perform auto neg over the trunc. " DEFVAL { disabled } ::= { mrtIfEntry 70 } mrtIfObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask. " ::= { mrtIfEntry 71 } mrtIfTxPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted power level in units of 0.1 dBm. " ::= { mrtIfEntry 72 } mrtIfLaserTempActual OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual laser temperature in units of 0.1 degrees centigrade. " ::= { mrtIfEntry 73 } mrtIfHighSpeed2 OBJECT-TYPE SYNTAX Gauge32 (12500..250000) MAX-ACCESS read-write STATUS current DESCRIPTION "The expected signal bit rate in units of 1,000,000 bits (Mb) per second. The value is given with 2 decimals, so the resolution is 10 000 bits per second. " DEFVAL { 250000 } ::= { mrtIfEntry 74 } mrtIfRxSignalStatus OBJECT-TYPE SYNTAX INTEGER { down (1), degraded (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { mrtIfEntry 75 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- mrtNotifyPrefix OBJECT IDENTIFIER ::= { lumentisMrtNotifications 0 } mrtIfTxSignalStatusDown NOTIFICATION-TYPE OBJECTS { mrtIfIndex, mrtIfName, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfEntityId, mrtIfTxSignalStatus } STATUS current DESCRIPTION "Sent when the signal status attribute of an interface changes. " ::= { mrtNotifyPrefix 1 } mrtIfTxSignalStatusUp NOTIFICATION-TYPE OBJECTS { mrtIfIndex, mrtIfName, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfEntityId, mrtIfTxSignalStatus } STATUS current DESCRIPTION "Sent when the signal status attribute of an interface changes. " ::= { mrtNotifyPrefix 2 } mrtIfTxSignalStatusDegraded NOTIFICATION-TYPE OBJECTS { mrtIfIndex, mrtIfName, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfEntityId, mrtIfTxSignalStatus } STATUS current DESCRIPTION "Sent when the signal status attribute of an interface changes. " ::= { mrtNotifyPrefix 3 } -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- mrtGeneralGroup OBJECT-GROUP OBJECTS { mrtGeneralTestAndIncr, mrtGeneralMibSpecVersion, mrtGeneralMibImplVersion, mrtGeneralLastChangeTime } STATUS deprecated DESCRIPTION "The general objects." ::= { lumMultirateGroups 1 } mrtIfGroup OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfErroredSeconds, mrtIfSeverelyErroredSeconds, mrtIfBackgroundBlockErrors, mrtIfUnavailableSeconds, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch } STATUS deprecated DESCRIPTION "The multirate interface objects." ::= { lumMultirateGroups 2 } mrtGeneralGroupV2 OBJECT-GROUP OBJECTS { mrtGeneralLastChangeTime } STATUS deprecated DESCRIPTION "The multirate general objects v2." ::= { lumMultirateGroups 3 } mrtIfGroupV2 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfErroredSeconds, mrtIfSeverelyErroredSeconds, mrtIfBackgroundBlockErrors, mrtIfUnavailableSeconds, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace } STATUS deprecated DESCRIPTION "The interface objects V2." ::= { lumMultirateGroups 4 } mrtIfGroupV3 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfErroredSeconds, mrtIfSeverelyErroredSeconds, mrtIfBackgroundBlockErrors, mrtIfUnavailableSeconds, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C } STATUS deprecated DESCRIPTION "The interface objects V3." ::= { lumMultirateGroups 5 } mrtIfGroupV4 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus } STATUS deprecated DESCRIPTION "The interface objects V4." ::= { lumMultirateGroups 6 } mrtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { mrtIfTxSignalStatusDown, mrtIfTxSignalStatusUp } STATUS deprecated DESCRIPTION "The multirate notifications." ::= { lumMultirateGroups 7 } mrtGeneralGroupV3 OBJECT-GROUP OBJECTS { mrtGeneralLastChangeTime, mrtGeneralStateLastChangeTime } STATUS deprecated DESCRIPTION "The multirate general objects v3." ::= { lumMultirateGroups 8 } mrtIfGroupV5 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4 } STATUS deprecated DESCRIPTION "The interface objects V5." ::= { lumMultirateGroups 9 } mrtIfGroupV6 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W } STATUS current DESCRIPTION "The interface objects V6." ::= { lumMultirateGroups 10 } mrtIfGroupV7 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch } STATUS deprecated DESCRIPTION "The interface objects V7." ::= { lumMultirateGroups 11 } mrtIfGroupV8 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfTruncVc4Status } STATUS deprecated DESCRIPTION "The interface objects V8." ::= { lumMultirateGroups 12 } mrtIfGroupV9 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch } STATUS deprecated DESCRIPTION "The interface objects V9." ::= { lumMultirateGroups 13 } mrtIfGroupV10 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold } STATUS deprecated DESCRIPTION "The interface objects V10." ::= { lumMultirateGroups 14 } mrtNotificationGroupV2 NOTIFICATION-GROUP NOTIFICATIONS { mrtIfTxSignalStatusDown, mrtIfTxSignalStatusUp, mrtIfTxSignalStatusDegraded } STATUS current DESCRIPTION "The multirate notifications." ::= { lumMultirateGroups 15 } mrtIfGroupV11 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold, mrtIfFarEndLoopback, mrtIfConfigureModeCommand, mrtIfTrxMode, mrtIfExpectedTxFrequency, mrtIfTxFrequency, mrtIfUnexpectedTxFrequency, mrtIfIllegalFrequency } STATUS deprecated DESCRIPTION "The interface objects V11 (2.2)." ::= { lumMultirateGroups 16 } mrtIfGroupV12 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold, mrtIfFarEndLoopback, mrtIfConfigureModeCommand, mrtIfTrxMode, mrtIfExpectedTxFrequency, mrtIfTxFrequency, mrtIfUnexpectedTxFrequency, mrtIfIllegalFrequency, mrtIfTrxMedia, mrtIfTrxMediaMismatch, mrtIfLaserForcedOn } STATUS deprecated DESCRIPTION "The interface objects V12 (3.1)." ::= { lumMultirateGroups 17 } mrtGeneralGroupV4 OBJECT-GROUP OBJECTS { mrtGeneralLastChangeTime, mrtGeneralStateLastChangeTime, mrtGeneralMrtIfTableSize } STATUS current DESCRIPTION "The multirate general objects V4 (3.1)." ::= { lumMultirateGroups 18 } mrtIfGroupV13 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold, mrtIfFarEndLoopback, mrtIfConfigureModeCommand, mrtIfTrxMode, mrtIfExpectedTxFrequency, mrtIfTxFrequency, mrtIfUnexpectedTxFrequency, mrtIfIllegalFrequency, mrtIfTrxMedia, mrtIfTrxMediaMismatch, mrtIfLaserForcedOn, mrtIfTruncAutoNegotiationMode } STATUS deprecated DESCRIPTION "The interface objects V13 (3.2)." ::= { lumMultirateGroups 19 } mrtIfGroupV14 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold, mrtIfFarEndLoopback, mrtIfConfigureModeCommand, mrtIfTrxMode, mrtIfExpectedTxFrequency, mrtIfTxFrequency, mrtIfUnexpectedTxFrequency, mrtIfIllegalFrequency, mrtIfTrxMedia, mrtIfTrxMediaMismatch, mrtIfLaserForcedOn, mrtIfTruncAutoNegotiationMode, mrtIfObjectProperty, mrtIfTxPowerLevel, mrtIfLaserTempActual } STATUS deprecated DESCRIPTION "The interface objects V14 (4.0)." ::= { lumMultirateGroups 20 } mrtIfGroupV15 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold, mrtIfFarEndLoopback, mrtIfConfigureModeCommand, mrtIfTrxMode, mrtIfExpectedTxFrequency, mrtIfTxFrequency, mrtIfUnexpectedTxFrequency, mrtIfIllegalFrequency, mrtIfTrxMedia, mrtIfTrxMediaMismatch, mrtIfLaserForcedOn, mrtIfTruncAutoNegotiationMode, mrtIfObjectProperty, mrtIfTxPowerLevel, mrtIfLaserTempActual } STATUS deprecated DESCRIPTION "The interface objects V15 (6.0)." ::= { lumMultirateGroups 21 } mrtIfGroupV16 OBJECT-GROUP OBJECTS { mrtIfIndex, mrtIfName, mrtIfDescr, mrtIfSubrack, mrtIfSlot, mrtIfTxPort, mrtIfRxPort, mrtIfInvPhysIndexOrZero, mrtIfFormat, mrtIfHighSpeed, mrtIfHighSpeedMin, mrtIfHighSpeedMax, mrtIfPowerLevel, mrtIfPowerLevelHighThreshold, mrtIfPowerLevelLowThreshold, mrtIfLaserStatus, mrtIfAdminStatus, mrtIfOperStatus, mrtIfLossOfSignal, mrtIfReceivedPowerHigh, mrtIfReceivedPowerLow, mrtIfLaserBiasHigh, mrtIfLossOfFrame, mrtIfMsAlarmIndicationSignalC2W, mrtIfMsAlarmIndicationSignalW2C, mrtIfRemoteDefectIndication, mrtIfLossOfSync, mrtIfBitrateMismatch, mrtIfLaserBias, mrtIfLaserBiasThreshold, mrtIfJ0PathTrace, mrtIfAuAlarmIndicationSignalW2C, mrtIfAuLossOfPointerW2C, mrtIfTxSignalStatus, mrtIfTruncVc4, mrtIfAuAlarmIndicationSignalC2W, mrtIfAuLossOfPointerC2W, mrtIfTraceIntrusionMode, mrtIfTraceTransmitted, mrtIfTraceReceived, mrtIfTraceExpected, mrtIfTraceAlarmMode, mrtIfTraceMismatch, mrtIfForwardAls, mrtIfSuppressRemoteAlarms, mrtIfConfigurationCommand, mrtIfTrxCodeMismatch, mrtIfTrxBitrateUnavailable, mrtIfTrxMissing, mrtIfTrxClass, mrtIfEntityId, mrtIfTransmitterFailed, mrtIfReceiverSensitivity, mrtIfPowerLevelLowRelativeThreshold, mrtIfFarEndLoopback, mrtIfConfigureModeCommand, mrtIfTrxMode, mrtIfExpectedTxFrequency, mrtIfTxFrequency, mrtIfUnexpectedTxFrequency, mrtIfIllegalFrequency, mrtIfTrxMedia, mrtIfTrxMediaMismatch, mrtIfLaserForcedOn, mrtIfTruncAutoNegotiationMode, mrtIfObjectProperty, mrtIfTxPowerLevel, mrtIfLaserTempActual, mrtIfHighSpeed2, mrtIfRxSignalStatus } STATUS current DESCRIPTION "The interface objects V16 (7.0)." ::= { lumMultirateGroups 22 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumMultirateBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V1." MODULE MANDATORY-GROUPS { mrtGeneralGroup, mrtIfGroup } ::= { lumMultirateCompl 1 } lumMultirateBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V2." MODULE MANDATORY-GROUPS { mrtGeneralGroupV2, mrtIfGroup } ::= { lumMultirateCompl 2 } lumMultirateBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V3." MODULE MANDATORY-GROUPS { mrtGeneralGroupV2, mrtIfGroupV2 } ::= { lumMultirateCompl 3 } lumMultirateBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V4." MODULE MANDATORY-GROUPS { mrtGeneralGroupV2, mrtIfGroupV3 } ::= { lumMultirateCompl 4 } lumMultirateBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V5." MODULE MANDATORY-GROUPS { mrtGeneralGroupV2, mrtIfGroupV4, mrtNotificationGroup } ::= { lumMultirateCompl 5 } lumMultirateBasicComplV6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V6." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV4, mrtNotificationGroup } ::= { lumMultirateCompl 6 } lumMultirateBasicComplV7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V7." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV5, mrtNotificationGroup } ::= { lumMultirateCompl 7 } lumMultirateBasicComplV8 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V8." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV6, mrtNotificationGroup } ::= { lumMultirateCompl 8 } lumMultirateBasicComplV9 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V9." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV7, mrtNotificationGroup } ::= { lumMultirateCompl 9 } lumMultirateBasicComplV10 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V10." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV8, mrtNotificationGroup } ::= { lumMultirateCompl 10 } lumMultirateBasicComplV11 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V11." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV9, mrtNotificationGroup } ::= { lumMultirateCompl 11 } lumMultirateBasicComplV12 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V12." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV10, mrtNotificationGroupV2 } ::= { lumMultirateCompl 12 } lumMultirateBasicComplV13 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V13 (2.2)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV3, mrtIfGroupV11, mrtNotificationGroupV2 } ::= { lumMultirateCompl 13 } lumMultirateBasicComplV14 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V14 (3.1)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV4, mrtIfGroupV12, mrtNotificationGroupV2 } ::= { lumMultirateCompl 14 } lumMultirateBasicComplV15 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V15 (3.2)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV4, mrtIfGroupV13, mrtNotificationGroupV2 } ::= { lumMultirateCompl 15 } lumMultirateBasicComplV16 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V16 (4.0)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV4, mrtIfGroupV14, mrtNotificationGroupV2 } ::= { lumMultirateCompl 16 } lumMultirateBasicComplV17 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V17 (6.0)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV4, mrtIfGroupV15, mrtNotificationGroupV2 } ::= { lumMultirateCompl 17 } lumMultirateBasicComplV18 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the multirate MIB V18 (7.0)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV4, mrtIfGroupV16, mrtNotificationGroupV2 } ::= { lumMultirateCompl 18 } lumMultirateBasicComplV19 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the multirate MIB V19 (17.0)." MODULE MANDATORY-GROUPS { mrtGeneralGroupV4, mrtIfGroupV16, mrtNotificationGroupV2 } ::= { lumMultirateCompl 19 } END