LUM-ETH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, NOTIFICATION-TYPE, Gauge32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString, DateAndTime FROM SNMPv2-TC lumModules, lumEthMIB FROM LUM-REG FaultStatus, MgmtNameString, SubrackNumber, SlotNumber, PortNumber, BoardOrInterfaceOperStatus, BoardOrInterfaceAdminStatus, ObjectProperty FROM LUM-TC; lumEthMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The ethernet client interface MIB. - General - Ethernet client interfaces " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201601110000Z" -- Jan 11th 2016 DESCRIPTION "Added default value notPresent for operStatus." REVISION "200212060000Z" -- Dec 6th 2002 DESCRIPTION "powerLevel attributes removed; not supported in hardware." REVISION "200211190000Z" -- Nov 19th 2002 DESCRIPTION "InterpacketGap: removed 64." REVISION "200211130000Z" -- Nov 13th 2002 DESCRIPTION "Removed auto from autoNeg." REVISION "200206250000Z" -- June 25th 2002 DESCRIPTION "The initial revision of this module." ::= { lumModules 19 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumEthConfs OBJECT IDENTIFIER ::= { lumEthMIB 1 } lumEthGroups OBJECT IDENTIFIER ::= { lumEthConfs 1 } lumEthCompl OBJECT IDENTIFIER ::= { lumEthConfs 2 } -- ---------------------------------------------------- -- Root for objects in the eth MIB -- ---------------------------------------------------- lumEthMIBObjects OBJECT IDENTIFIER ::= { lumEthMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- ethGeneral OBJECT IDENTIFIER ::= { lumEthMIBObjects 1 } ethIfList OBJECT IDENTIFIER ::= { lumEthMIBObjects 2 } lumentisEthNotifications OBJECT IDENTIFIER ::= { lumEthMIBObjects 3 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- EthSignalFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Signal format for ethernet interfaces. gbE - Gigabit Ethernet signal lan10GbE - 10 Gigabit Ethernet LAN signal" SYNTAX INTEGER { undefined (0), gbE (1), lan10GbE (2) } -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- ethGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { ethGeneral 1 } ethGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { ethGeneral 2 } ethGeneralEthIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of table " ::= { ethGeneral 3 } -- ---------------------------------------------------- -- Multi-bit rate client interfaces -- ---------------------------------------------------- ethIfTable OBJECT-TYPE SYNTAX SEQUENCE OF EthIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface list." ::= { ethIfList 1 } ethIfEntry OBJECT-TYPE SYNTAX EthIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the interface list. " INDEX { ethIfIndex } ::= { ethIfTable 1 } EthIfEntry ::= SEQUENCE { ethIfIndex Unsigned32, ethIfName MgmtNameString, ethIfDescr DisplayString, ethIfSubrack SubrackNumber, ethIfSlot SlotNumber, ethIfTxPort PortNumber, ethIfRxPort PortNumber, ethIfInvPhysIndexOrZero Unsigned32, ethIfFormat EthSignalFormat, ethIfHighSpeed Gauge32, ethIfAdminStatus BoardOrInterfaceAdminStatus, ethIfOperStatus BoardOrInterfaceOperStatus, ethIfLaserStatus INTEGER, ethIfTxSignalStatus INTEGER, ethIfAutoNegotiationMode INTEGER, ethIfAutoNegotiationStatus INTEGER, ethIfDuplexCapability INTEGER, ethIfFlowControlMode INTEGER, ethIfInterPacketGap Gauge32, ethIfFrameSize Gauge32, ethIfPowerLevel Integer32, ethIfPowerLevelHighThreshold Integer32, ethIfPowerLevelLowThreshold Integer32, ethIfLaserBias Unsigned32, ethIfLaserBiasThreshold Unsigned32, ethIfLossOfSignal FaultStatus, ethIfReceivedPowerHigh FaultStatus, ethIfReceivedPowerLow FaultStatus, ethIfLaserBiasHigh FaultStatus, ethIfLossOfSync FaultStatus, ethIfBitrateMismatch FaultStatus, ethIfLinkDown FaultStatus, ethIfAuAlarmIndicationSignalW2C FaultStatus, ethIfForwardAls INTEGER, ethIfSuppressRemoteAlarms INTEGER, ethIfFarEndLoopback INTEGER, ethIfEntityId Unsigned32, ethIfGbeUtilization Unsigned32, ethIfObjectProperty ObjectProperty, ethIfPowerLevelLowRelativeThreshold Integer32 } ethIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { ethIfEntry 1 } ethIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the interface, for example 'eth1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: eth:s:s:p - Eth client interface " ::= { ethIfEntry 2 } ethIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { ethIfEntry 3 } ethIfSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { ethIfEntry 4 } ethIfSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { ethIfEntry 5 } ethIfTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the TX-side of the interface is located. " ::= { ethIfEntry 6 } ethIfRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the RX-side of the interface is located. " ::= { ethIfEntry 7 } ethIfInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { ethIfEntry 8 } ethIfFormat OBJECT-TYPE SYNTAX EthSignalFormat MAX-ACCESS read-only STATUS current DESCRIPTION "The expected signal format. The default value is board dependent. For information about the default value for this particular board, please refer to the user manual. " DEFVAL { gbE } ::= { ethIfEntry 9 } ethIfHighSpeed OBJECT-TYPE SYNTAX Gauge32 (1000..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "The expected signal bit rate in units of 1,000,000 bits (Mb) per second. " ::= { ethIfEntry 10 } ethIfAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { ethIfEntry 11 } ethIfOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The interface is operational. " DEFVAL { notPresent } ::= { ethIfEntry 12 } ethIfLaserStatus OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the laser. off - The laser is turned off. on - The laser is turned on. " ::= { ethIfEntry 13 } ethIfTxSignalStatus OBJECT-TYPE SYNTAX INTEGER { down (1), degraded (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { ethIfEntry 14 } ethIfAutoNegotiationMode OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The wanted auto negotiation mode. off - auto negotiation process is disabled on - auto negotiation process is enabled " DEFVAL { on } ::= { ethIfEntry 15 } ethIfAutoNegotiationStatus OBJECT-TYPE SYNTAX INTEGER { incomplete (1), half (2), full (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the auto negotiation procedure incomplete - the result is still pending half - half duplex full - full duplex " ::= { ethIfEntry 16 } ethIfDuplexCapability OBJECT-TYPE SYNTAX INTEGER { half (2), full (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The duplex capability of the HW. half - supports half duplex full - supports full duplex " ::= { ethIfEntry 17 } ethIfFlowControlMode OBJECT-TYPE SYNTAX INTEGER { noPause (1), rxPause (2), txPause (3), bothPause (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode for handling of pause messages between the peers. noPause - PAUSE frame reception and transmission is disabled rxPause - PAUSE frame reception is enabled (asymmetric) txPause - PAUSE frame transmission is enabled (asymetric) bothPause - send and accept pause messages (symmetric). " DEFVAL { rxPause } ::= { ethIfEntry 18 } ethIfInterPacketGap OBJECT-TYPE SYNTAX Gauge32 (72..456) MAX-ACCESS read-write STATUS current DESCRIPTION "Time between the frames in nano seconds. Legal values are 72, 80, ... 200, 320, 328, 336, ... 456 " DEFVAL { 96 } ::= { ethIfEntry 19 } ethIfFrameSize OBJECT-TYPE SYNTAX Gauge32 (1518..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum size of the transmitted and received frames (in bytes). " DEFVAL { 9600 } ::= { ethIfEntry 20 } ethIfPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received power level in units of 0.1 dBm. " ::= { ethIfEntry 21 } ethIfPowerLevelHighThreshold OBJECT-TYPE SYNTAX Integer32 (-200..-10) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The upper threshold for received power level in units of 0.1 dBm. " DEFVAL { -50 } ::= { ethIfEntry 22 } ethIfPowerLevelLowThreshold OBJECT-TYPE SYNTAX Integer32 (-200..-10) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The lower threshold for received power level in units of 0.1 dBm. " DEFVAL { -160 } ::= { ethIfEntry 23 } ethIfLaserBias OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measures laser bias current value in tenths of mA (0.1 mA). " ::= { ethIfEntry 24 } ethIfLaserBiasThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%. " DEFVAL { 200 } ::= { ethIfEntry 25 } ethIfLossOfSignal OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. " ::= { ethIfEntry 26 } ethIfReceivedPowerHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Received power level high threshold exceeded. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dB below the threshold. " ::= { ethIfEntry 27 } ethIfReceivedPowerLow OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Received power level low threshold exceeded. A: The received power level is below the associated threshold. D: The received power level is 0.5 dB above the threshold. " ::= { ethIfEntry 28 } ethIfLaserBiasHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Laser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated threshold. " ::= { ethIfEntry 29 } ethIfLossOfSync OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of sync. A: GbE 'frame' can not be located. D: GbE 'frame' is located. " ::= { ethIfEntry 30 } ethIfBitrateMismatch OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bitrate mismatch. A: The interface is unable to lock to the inserted signal. D: The interface is able to lock to the inserted signal. " ::= { ethIfEntry 31 } ethIfLinkDown OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A: Failure to negotiate a connection with the other party. D: A connection is negotiated. " ::= { ethIfEntry 32 } ethIfAuAlarmIndicationSignalW2C OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Payload Alarm indication signal (AIS) on the trunk-side. A: An 'all ones' SDH signal is detected. D: SDH signal recovered. " ::= { ethIfEntry 33 } ethIfForwardAls OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward Automatic Laser Shut-down. Decides the behaviour of the client laser (W2C) when the trunc signal is defected. disabled - The laser is NOT turned off at failure. enabled - The laser is turned off at failure. " DEFVAL { disabled } ::= { ethIfEntry 34 } ethIfSuppressRemoteAlarms OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Suppress AIS in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are suppressed. " DEFVAL { disabled } ::= { ethIfEntry 35 } ethIfFarEndLoopback OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Loop the client TX signal back to the client RX. disabled - the signal is not looped enabled - the signal is looped. " DEFVAL { disabled } ::= { ethIfEntry 36 } ethIfEntityId OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index in entity table. -- Only used for notifications " ::= { ethIfEntry 37 } ethIfGbeUtilization OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Shows a snapshot of the current bandwidth utilization of the GbE signal during the last second. It is expressed in per cent of 1 Gbps " ::= { ethIfEntry 38 } ethIfObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask. " ::= { ethIfEntry 39 } ethIfPowerLevelLowRelativeThreshold OBJECT-TYPE SYNTAX Integer32 (-50..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity. " DEFVAL { 30 } ::= { ethIfEntry 40 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- ethNotifyPrefix OBJECT IDENTIFIER ::= { lumentisEthNotifications 0 } ethIfTxSignalStatusDown NOTIFICATION-TYPE OBJECTS { ethIfIndex, ethIfName, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfEntityId, ethIfTxSignalStatus } STATUS current DESCRIPTION "Sent when the signal status attribute of an interface changes. " ::= { ethNotifyPrefix 1 } ethIfTxSignalStatusUp NOTIFICATION-TYPE OBJECTS { ethIfIndex, ethIfName, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfEntityId, ethIfTxSignalStatus } STATUS current DESCRIPTION "Sent when the signal status attribute of an interface changes. " ::= { ethNotifyPrefix 2 } ethIfTxSignalStatusDegraded NOTIFICATION-TYPE OBJECTS { ethIfIndex, ethIfName, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfEntityId, ethIfTxSignalStatus } STATUS current DESCRIPTION "Sent when the signal status attribute of an interface changes. " ::= { ethNotifyPrefix 3 } -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- ethGeneralGroup OBJECT-GROUP OBJECTS { ethGeneralLastChangeTime, ethGeneralStateLastChangeTime} STATUS deprecated DESCRIPTION "The general objects." ::= { lumEthGroups 1 } ethIfGroup OBJECT-GROUP OBJECTS { ethIfIndex, ethIfName, ethIfDescr, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfInvPhysIndexOrZero, ethIfFormat, ethIfHighSpeed, ethIfPowerLevel, ethIfPowerLevelHighThreshold, ethIfPowerLevelLowThreshold, ethIfLaserStatus, ethIfAdminStatus, ethIfOperStatus, ethIfTxSignalStatus, ethIfAutoNegotiationMode, ethIfAutoNegotiationStatus, ethIfLaserBias, ethIfLaserBiasThreshold, ethIfDuplexCapability, ethIfFlowControlMode, ethIfInterPacketGap, ethIfFrameSize, ethIfLossOfSignal, ethIfReceivedPowerHigh, ethIfReceivedPowerLow, ethIfLaserBiasHigh, ethIfLossOfSync, ethIfBitrateMismatch, ethIfLinkDown } STATUS deprecated DESCRIPTION "The eth interface objects." ::= { lumEthGroups 2 } ethNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { ethIfTxSignalStatusDown, ethIfTxSignalStatusUp } STATUS deprecated DESCRIPTION "The eth notifications." ::= { lumEthGroups 3 } ethIfGroupV2 OBJECT-GROUP OBJECTS { ethIfIndex, ethIfName, ethIfDescr, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfInvPhysIndexOrZero, ethIfFormat, ethIfHighSpeed, ethIfLaserStatus, ethIfAdminStatus, ethIfOperStatus, ethIfTxSignalStatus, ethIfAutoNegotiationMode, ethIfAutoNegotiationStatus, ethIfLaserBias, ethIfLaserBiasThreshold, ethIfDuplexCapability, ethIfFlowControlMode, ethIfInterPacketGap, ethIfFrameSize, ethIfLossOfSignal, ethIfReceivedPowerHigh, ethIfReceivedPowerLow, ethIfLaserBiasHigh, ethIfLossOfSync, ethIfBitrateMismatch, ethIfLinkDown } STATUS deprecated DESCRIPTION "The eth interface objects v2." ::= { lumEthGroups 4 } ethIfGroupV3 OBJECT-GROUP OBJECTS { ethIfIndex, ethIfName, ethIfDescr, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfInvPhysIndexOrZero, ethIfFormat, ethIfHighSpeed, ethIfLaserStatus, ethIfAdminStatus, ethIfOperStatus, ethIfTxSignalStatus, ethIfAutoNegotiationMode, ethIfAutoNegotiationStatus, ethIfLaserBias, ethIfLaserBiasThreshold, ethIfDuplexCapability, ethIfFlowControlMode, ethIfInterPacketGap, ethIfFrameSize, ethIfLossOfSignal, ethIfReceivedPowerHigh, ethIfReceivedPowerLow, ethIfLaserBiasHigh, ethIfLossOfSync, ethIfBitrateMismatch, ethIfLinkDown, ethIfAuAlarmIndicationSignalW2C, ethIfForwardAls, ethIfSuppressRemoteAlarms, ethIfFarEndLoopback } STATUS deprecated DESCRIPTION "The eth interface objects v3." ::= { lumEthGroups 5 } ethNotificationGroupV2 NOTIFICATION-GROUP NOTIFICATIONS { ethIfTxSignalStatusDown, ethIfTxSignalStatusUp, ethIfTxSignalStatusDegraded } STATUS current DESCRIPTION "The eth notifications." ::= { lumEthGroups 6 } ethIfGroupV4 OBJECT-GROUP OBJECTS { ethIfIndex, ethIfName, ethIfDescr, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfInvPhysIndexOrZero, ethIfFormat, ethIfHighSpeed, ethIfLaserStatus, ethIfAdminStatus, ethIfOperStatus, ethIfTxSignalStatus, ethIfAutoNegotiationMode, ethIfAutoNegotiationStatus, ethIfLaserBias, ethIfLaserBiasThreshold, ethIfDuplexCapability, ethIfFlowControlMode, ethIfInterPacketGap, ethIfFrameSize, ethIfLossOfSignal, ethIfReceivedPowerHigh, ethIfReceivedPowerLow, ethIfLaserBiasHigh, ethIfLossOfSync, ethIfBitrateMismatch, ethIfLinkDown, ethIfAuAlarmIndicationSignalW2C, ethIfForwardAls, ethIfSuppressRemoteAlarms, ethIfFarEndLoopback, ethIfGbeUtilization } STATUS deprecated DESCRIPTION "The eth interface objects v4 (3.0)." ::= { lumEthGroups 7 } ethGeneralGroupV2 OBJECT-GROUP OBJECTS { ethGeneralLastChangeTime, ethGeneralStateLastChangeTime, ethGeneralEthIfTableSize } STATUS current DESCRIPTION "The general objects. (3.1)" ::= { lumEthGroups 8 } ethIfGroupV5 OBJECT-GROUP OBJECTS { ethIfIndex, ethIfName, ethIfDescr, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfInvPhysIndexOrZero, ethIfFormat, ethIfHighSpeed, ethIfLaserStatus, ethIfAdminStatus, ethIfOperStatus, ethIfTxSignalStatus, ethIfAutoNegotiationMode, ethIfAutoNegotiationStatus, ethIfLaserBias, ethIfLaserBiasThreshold, ethIfDuplexCapability, ethIfFlowControlMode, ethIfInterPacketGap, ethIfFrameSize, ethIfLossOfSignal, ethIfReceivedPowerHigh, ethIfReceivedPowerLow, ethIfLaserBiasHigh, ethIfLossOfSync, ethIfBitrateMismatch, ethIfLinkDown, ethIfAuAlarmIndicationSignalW2C, ethIfForwardAls, ethIfSuppressRemoteAlarms, ethIfFarEndLoopback, ethIfGbeUtilization, ethIfPowerLevel } STATUS deprecated DESCRIPTION "The eth interface objects v5 (3.1)." ::= { lumEthGroups 9 } ethIfGroupV6 OBJECT-GROUP OBJECTS { ethIfIndex, ethIfName, ethIfDescr, ethIfSubrack, ethIfSlot, ethIfTxPort, ethIfRxPort, ethIfInvPhysIndexOrZero, ethIfFormat, ethIfHighSpeed, ethIfLaserStatus, ethIfAdminStatus, ethIfOperStatus, ethIfTxSignalStatus, ethIfAutoNegotiationMode, ethIfAutoNegotiationStatus, ethIfLaserBias, ethIfLaserBiasThreshold, ethIfDuplexCapability, ethIfFlowControlMode, ethIfInterPacketGap, ethIfFrameSize, ethIfLossOfSignal, ethIfReceivedPowerHigh, ethIfReceivedPowerLow, ethIfLaserBiasHigh, ethIfLossOfSync, ethIfBitrateMismatch, ethIfLinkDown, ethIfAuAlarmIndicationSignalW2C, ethIfForwardAls, ethIfSuppressRemoteAlarms, ethIfFarEndLoopback, ethIfEntityId, ethIfGbeUtilization, ethIfPowerLevel, ethIfObjectProperty, ethIfPowerLevelLowRelativeThreshold } STATUS current DESCRIPTION "The eth interface objects v6 (4.0)." ::= { lumEthGroups 10 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumEthBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the eth MIB V1." MODULE MANDATORY-GROUPS { ethGeneralGroup, ethIfGroup, ethNotificationGroup } ::= { lumEthCompl 1 } lumEthBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the eth MIB V2." MODULE MANDATORY-GROUPS { ethGeneralGroup, ethIfGroupV2, ethNotificationGroup } ::= { lumEthCompl 2 } lumEthBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the eth MIB V3." MODULE MANDATORY-GROUPS { ethGeneralGroup, ethIfGroupV3, ethNotificationGroupV2 } ::= { lumEthCompl 3 } lumEthBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the eth MIB V4 (3.0)." MODULE MANDATORY-GROUPS { ethGeneralGroup, ethIfGroupV4, ethNotificationGroupV2 } ::= { lumEthCompl 4 } lumEthBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the eth MIB V5 (3.1)." MODULE MANDATORY-GROUPS { ethGeneralGroupV2, ethIfGroupV5, ethNotificationGroupV2 } ::= { lumEthCompl 5 } lumEthBasicComplV6 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the eth MIB V6 (4.0)." MODULE MANDATORY-GROUPS { ethGeneralGroupV2, ethIfGroupV6, ethNotificationGroupV2 } ::= { lumEthCompl 6 } END