LUM-AUX-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TestAndIncr, DateAndTime, DisplayString FROM SNMPv2-TC lumModules, lumAuxMIB FROM LUM-REG MgmtNameString, FaultStatus, SubrackNumber, SlotNumber, PortNumber, BoardOrInterfaceAdminStatus, BoardOrInterfaceOperStatus, ObjectProperty, CommandString, AdminStatusWithNA, Signed32WithNA FROM LUM-TC; lumAuxMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The auxiliary equipment MIB. - General - Parameters for SNMP managed equipment - Fiber protection interfaces - Node table for TM2000. - Equipment table for TM2000. " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201704170000Z" -- April 17th 2017 DESCRIPTION "Changes made for release r28.1: - Changed presentation of cabinet oper mode." REVISION "201604250000Z" -- Apr 25th 2016 DESCRIPTION "Added attributes to cabinet table. Added Fan and FanGroup tables." REVISION "201601110000Z" -- Jan 11th 2016 DESCRIPTION "Added default operStatus to notPresent." REVISION "201411030000Z" -- November 3:rd 2014 DESCRIPTION "Added rx/txSignalStatus, to support MIB-II implementation." REVISION "201212200000Z" -- December 20th 2012 DESCRIPTION "Host Unreachable and Configuration Mismatch alarms (TM2000) added." REVISION "201110120000Z" -- October 12th 2011 DESCRIPTION "Node table (TM2000) added." REVISION "200908190000Z" -- August 19th 2009 DESCRIPTION "Power extender added." REVISION "200410080000Z" -- October 8th 2004 DESCRIPTION "The initial revision of this module." ::= { lumModules 29 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumAuxConfs OBJECT IDENTIFIER ::= { lumAuxMIB 1 } lumAuxGroups OBJECT IDENTIFIER ::= { lumAuxConfs 1 } lumAuxCompl OBJECT IDENTIFIER ::= { lumAuxConfs 2 } -- ---------------------------------------------------- -- Root for objects in the aux MIB -- ---------------------------------------------------- lumAuxMIBObjects OBJECT IDENTIFIER ::= { lumAuxMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- auxGeneral OBJECT IDENTIFIER ::= { lumAuxMIBObjects 1 } auxSnmpList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 2 } auxFxIfList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 3 } auxEquipmentList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 4 } auxRamanIfList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 5 } auxRamanSafetyList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 6 } auxPEIfList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 7 } auxNodeList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 8 } auxCabinetList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 9 } auxFanList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 10 } auxFanGroupList OBJECT IDENTIFIER ::= { lumAuxMIBObjects 11 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- auxGeneralTestAndIncr OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "Protection against simultaneous access from multiple managers. See SNMPv2-TC. " ::= { auxGeneral 1 } auxGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state of the MIB was last changed. " ::= { auxGeneral 2 } auxGeneralConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { auxGeneral 3 } auxGeneralSnmpTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the table for snmp managed equipment. " ::= { auxGeneral 4 } auxGeneralFxIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the fiber protections interface table. " ::= { auxGeneral 5 } auxGeneralAuxEquipmentTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the fiber protections interface table. " ::= { auxGeneral 6 } auxGeneralRamanIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the raman amplifier interface table. " ::= { auxGeneral 7 } auxGeneralRamanSafetyTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the raman amplifier safety table. " ::= { auxGeneral 8 } auxGeneralPEIfTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the raman amplifier interface table. " ::= { auxGeneral 9 } auxGeneralNodeTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the Node table. " ::= { auxGeneral 10 } auxGeneralCabinetTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the Cabinet table. " ::= { auxGeneral 11 } auxGeneralFanTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the Fan table. " ::= { auxGeneral 12 } auxGeneralFanGroupTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the FanGroup table. " ::= { auxGeneral 13 } -- ---------------------------------------------------- -- Aux SNMP managed equipment table -- ---------------------------------------------------- auxSnmpTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxSnmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of SNMP managed equipment." ::= { auxSnmpList 1 } auxSnmpEntry OBJECT-TYPE SYNTAX AuxSnmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SNMP managed equipment list. " INDEX { auxSnmpIndex } ::= { auxSnmpTable 1 } AuxSnmpEntry ::= SEQUENCE { auxSnmpIndex Unsigned32, auxSnmpName MgmtNameString, auxSnmpDescr DisplayString, auxSnmpAddress IpAddress, auxSnmpPort Unsigned32, auxSnmpVersion INTEGER, auxSnmpReadCommunity DisplayString, auxSnmpWriteCommunity DisplayString, auxSnmpAdminStatus BoardOrInterfaceAdminStatus, auxSnmpOperStatus BoardOrInterfaceOperStatus, auxSnmpInvPhysIndexOrZero Unsigned32, auxSnmpHostUnreachable FaultStatus, auxSnmpSnmpError FaultStatus, auxSnmpUnexpectedEquipmentType FaultStatus, auxSnmpInconsistentConfiguration FaultStatus, auxSnmpConfigurationProblem FaultStatus } auxSnmpIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each equipment. " ::= { auxSnmpEntry 1 } auxSnmpName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the SNMP managed equipment. " ::= { auxSnmpEntry 2 } auxSnmpDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " ::= { auxSnmpEntry 3 } auxSnmpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address for the SNMP managed equipment. " ::= { auxSnmpEntry 4 } auxSnmpVersion OBJECT-TYPE SYNTAX INTEGER { v1 (1), v2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP protocol version. " DEFVAL { v2c } ::= { auxSnmpEntry 5 } auxSnmpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port number for the SNMP managed equipment. " DEFVAL { 161 } ::= { auxSnmpEntry 6 } auxSnmpReadCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string to use when reading information from the SNMP managed equipment. " DEFVAL { "public" } ::= { auxSnmpEntry 7 } auxSnmpWriteCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string to use when configuring the SNMP managed equipment. " DEFVAL { "private" } ::= { auxSnmpEntry 8 } auxSnmpAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { auxSnmpEntry 9 } auxSnmpOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the object. notPresent - The HW related to the object is not available down - The object is de-activated or there are faults preventing it from going to the 'up'-state. up - The interface is active. " DEFVAL { notPresent } ::= { auxSnmpEntry 10 } auxSnmpInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { auxSnmpEntry 11 } auxSnmpHostUnreachable OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Can not contact the remote external equipment. Check address and community strings. A(ctivation): Contact lost D(e-activation): Contact stablished again " ::= { auxSnmpEntry 12 } auxSnmpSnmpError OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Can not login to the remote external equipment A(ctivation): Contact lost D(e-activation): Contact stablished again " ::= { auxSnmpEntry 13 } auxSnmpUnexpectedEquipmentType OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The remote external equipment is not of the expected type. A(ctivation): Wrong equipment detected D(e-activation): Expected equipment detected " ::= { auxSnmpEntry 14 } auxSnmpInconsistentConfiguration OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Changes in the configuration of the remote equipment has been detected. This could happen if some other SNMP-manager is manipulating the configuration, or the configuration is changed via some local CLI. A(ctivation): Changes in the configuration detected D(e-activation): Configuration is consistent " ::= { auxSnmpEntry 15 } auxSnmpConfigurationProblem OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP-manager can not configure the remote equipment. A possible cause could be that the writeCommunity does not match the remote equipment. A(ctivation): A number of consecutive write operations failed. D(e-activation): Write operation succeded. " ::= { auxSnmpEntry 16 } -- ---------------------------------------------------- -- Aux i/f group -- ---------------------------------------------------- auxFxIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxFxIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of OAS modules." ::= { auxFxIfList 1 } auxFxIfEntry OBJECT-TYPE SYNTAX AuxFxIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the OAS module list. " INDEX { auxFxIfIndex } ::= { auxFxIfTable 1 } AuxFxIfEntry ::= SEQUENCE { auxFxIfIndex Unsigned32, auxFxIfName MgmtNameString, auxFxIfDescr DisplayString, auxFxIfSubrack SubrackNumber, auxFxIfSlot SlotNumber, auxFxIfRxPort PortNumber, auxFxIfTxPort PortNumber, auxFxIfInvPhysIndexOrZero Unsigned32, auxFxIfAdminStatus BoardOrInterfaceAdminStatus, auxFxIfOperStatus BoardOrInterfaceOperStatus, auxFxIfRxPowerLevel Integer32, auxFxIfLossOfSignalThreshold Integer32, auxFxIfLossOfSignal FaultStatus, auxFxIfObjectProperty ObjectProperty } auxFxIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxFxIfEntry 1 } auxFxIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the FxIf. " ::= { auxFxIfEntry 2 } auxFxIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxFxIfEntry 3 } auxFxIfSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { auxFxIfEntry 4 } auxFxIfSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { auxFxIfEntry 5 } auxFxIfTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxFxIfEntry 6 } auxFxIfRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxFxIfEntry 7 } auxFxIfInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { auxFxIfEntry 8 } auxFxIfAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { auxFxIfEntry 9 } auxFxIfOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it from going to the 'up'-state. up - The interface is active. " DEFVAL { notPresent } ::= { auxFxIfEntry 10 } auxFxIfRxPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received power level in units of 0.1 dBm. " ::= { auxFxIfEntry 11 } auxFxIfLossOfSignalThreshold OBJECT-TYPE SYNTAX Integer32 (-350..-60) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. " DEFVAL { -350 } ::= { auxFxIfEntry 12 } auxFxIfLossOfSignal OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. " ::= { auxFxIfEntry 13 } auxFxIfObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask. " ::= { auxFxIfEntry 14 } -- ---------------------------------------------------- -- Aux equipment group -- ---------------------------------------------------- auxEquipmentTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of OAS modules." ::= { auxEquipmentList 1 } auxEquipmentEntry OBJECT-TYPE SYNTAX AuxEquipmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the OAS module list. " INDEX { auxEquipmentIndex } ::= { auxEquipmentTable 1 } AuxEquipmentEntry ::= SEQUENCE { auxEquipmentIndex Unsigned32, auxEquipmentName MgmtNameString, auxEquipmentDescr DisplayString, auxEquipmentSubrack SubrackNumber, auxEquipmentSlot SlotNumber, -- auxEquipmentInvPhysIndexOrZero Unsigned32, auxEquipmentAdminStatus BoardOrInterfaceAdminStatus, auxEquipmentOperStatus BoardOrInterfaceOperStatus, auxEquipmentPowerFailure FaultStatus, auxEquipmentFanProblem FaultStatus, auxEquipmentObjectProperty ObjectProperty, auxEquipmentPumpsEol FaultStatus, auxEquipmentSelfTestFailure FaultStatus, auxEquipmentAmbientTemp Integer32, auxEquipmentRebootEquipment CommandString, auxEquipmentPowerAMissing FaultStatus, auxEquipmentPowerBMissing FaultStatus, auxEquipmentConfigurationMismatch FaultStatus} auxEquipmentIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxEquipmentEntry 1 } auxEquipmentName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the equipment. " ::= { auxEquipmentEntry 2 } auxEquipmentDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxEquipmentEntry 3 } auxEquipmentSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { auxEquipmentEntry 4 } auxEquipmentSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { auxEquipmentEntry 5 } auxEquipmentAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { auxEquipmentEntry 6 } auxEquipmentOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it from going to the 'up'-state. up - The interface is active. " DEFVAL { notPresent } ::= { auxEquipmentEntry 7 } auxEquipmentPowerFailure OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Remote equipment reports power failure. A(ctivation): Power failure detected D(e-activation): Power failure no longer active " ::= { auxEquipmentEntry 8 } auxEquipmentFanProblem OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Remote equipment report problem with built-in fan unit. A(ctivation): Fan problem detected D(e-activation): Fan problem no longer active " ::= { auxEquipmentEntry 9 } auxEquipmentObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask " ::= { auxEquipmentEntry 10 } auxEquipmentPumpsEol OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the end-of-life status of the HW. For the RAMAN, the alarm is active if the current of any of the pumps has reached its end-of-life threshold. " ::= { auxEquipmentEntry 11 } auxEquipmentSelfTestFailure OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the built-in self-test failed. " ::= { auxEquipmentEntry 12 } auxEquipmentAmbientTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the ambient temperature of the equipment. " ::= { auxEquipmentEntry 13 } auxEquipmentRebootEquipment OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Executing this procedure will initiate a reboot of the auxiliary equipment. " ::= { auxEquipmentEntry 14 } auxEquipmentPowerAMissing OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of 1U Power A missing Alarm. " ::= { auxEquipmentEntry 15 } auxEquipmentPowerBMissing OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of 1U Power B missing Alarm. " ::= { auxEquipmentEntry 16 } auxEquipmentConfigurationMismatch OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " A configuration request has failed and there might now be a mismatch in configuration between tm3000 and external system. A: A configuration request failed. D: The configuration is re-sent to external system. " ::= { auxEquipmentEntry 17 } -- ---------------------------------------------------- -- Aux raman i/f group -- ---------------------------------------------------- auxRamanIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxRamanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of RAMAN i/f." ::= { auxRamanIfList 1 } auxRamanIfEntry OBJECT-TYPE SYNTAX AuxRamanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RAMAN i/f list. " INDEX { auxRamanIfIndex } ::= { auxRamanIfTable 1 } AuxRamanIfEntry ::= SEQUENCE { auxRamanIfIndex Unsigned32, auxRamanIfName MgmtNameString, auxRamanIfDescr DisplayString, auxRamanIfSubrack SubrackNumber, auxRamanIfSlot SlotNumber, auxRamanIfRxPort PortNumber, auxRamanIfTxPort PortNumber, auxRamanIfInvPhysIndexOrZero Unsigned32, auxRamanIfAdminStatus BoardOrInterfaceAdminStatus, auxRamanIfOperStatus BoardOrInterfaceOperStatus, auxRamanIfObjectProperty ObjectProperty, auxRamanIfPumpsOperationMode INTEGER, auxRamanIfModuleOperationMode INTEGER, auxRamanIfPumpsOperationModeConfig CommandString, auxRamanIfLineFiberType INTEGER, auxRamanIfAutoRestartProcTime Unsigned32, auxRamanIfArpPauseStatus INTEGER, auxRamanIfPumpsStatus INTEGER, auxRamanIfTotalPumpsPower Integer32, auxRamanIfPump1WantedPower Unsigned32, auxRamanIfPump1ActualPower Integer32, auxRamanIfPump1Current Unsigned32, auxRamanIfPump1Temperature Integer32, auxRamanIfPump2WantedPower Unsigned32, auxRamanIfPump2ActualPower Integer32, auxRamanIfPump2Current Unsigned32, auxRamanIfPump2Temperature Integer32, auxRamanIfWantedGain Unsigned32, auxRamanIfActualGain Unsigned32, auxRamanIfReceivedPowerLevel Integer32, auxRamanIfReflectionPowerLevel Integer32, auxRamanIfReflectionPowerRatio Integer32, auxRamanIf1510BandReceivedPowerLevel Integer32, auxRamanIfOscReceivedPowerLevel Integer32, auxRamanIfAPRState INTEGER, auxRamanIfOscDitherState INTEGER, auxRamanIfLineLossOfSignal FaultStatus, auxRamanIfOscDitherLos FaultStatus, auxRamanIfHighBackReflection FaultStatus, auxRamanIfHighLineOutputPower FaultStatus, auxRamanIfLowLineOutputPower FaultStatus, auxRamanIfModuleTempTooHigh FaultStatus, auxRamanIfModuleTempHigh FaultStatus, auxRamanIfPumpsTempTooHigh FaultStatus, auxRamanIfPumpsTempHigh FaultStatus, auxRamanIfAprShutdown FaultStatus, auxRamanIfLineFiberDeteriorated FaultStatus, auxRamanIf1510BandPowerLos FaultStatus, auxRamanIfManualRestartTrial CommandString, auxRamanIfModuleTemp Integer32, auxRamanIfTxSignalStatus INTEGER, auxRamanIfRxSignalStatus INTEGER } auxRamanIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxRamanIfEntry 1 } auxRamanIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the FxIf. " ::= { auxRamanIfEntry 2 } auxRamanIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxRamanIfEntry 3 } auxRamanIfSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { auxRamanIfEntry 4 } auxRamanIfSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { auxRamanIfEntry 5 } auxRamanIfTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxRamanIfEntry 6 } auxRamanIfRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxRamanIfEntry 7 } auxRamanIfInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { auxRamanIfEntry 8 } auxRamanIfAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { auxRamanIfEntry 9 } auxRamanIfOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it from going to the 'up'-state. up - The interface is active. " DEFVAL { notPresent } ::= { auxRamanIfEntry 10 } auxRamanIfObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask. " ::= { auxRamanIfEntry 11 } auxRamanIfModuleOperationMode OBJECT-TYPE SYNTAX INTEGER { coPropagating (1), counterPropagating (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Module operational mode. " ::= { auxRamanIfEntry 12 } auxRamanIfPumpsOperationMode OBJECT-TYPE SYNTAX INTEGER { maxPumpsPower (1), manualPumpsPower (2), automaticalGainControl (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Pumps operational mode. " DEFVAL { maxPumpsPower } ::= { auxRamanIfEntry 13 } auxRamanIfPumpsOperationModeConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Configure pumps operational mode. " ::= { auxRamanIfEntry 14 } auxRamanIfLineFiberType OBJECT-TYPE SYNTAX INTEGER { ftSMF(1), ftLeaf(2), ftTrueWave(3), ftG654(4), ftTeralight(5), ftG653(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Line fiber type (for adaptive gain flattening). " DEFVAL { ftSMF } ::= { auxRamanIfEntry 15 } auxRamanIfAutoRestartProcTime OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic Restart Procedure restart time. " DEFVAL { 10 } ::= { auxRamanIfEntry 16 } auxRamanIfArpPauseStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), pause (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows whether the Raman amplifier is in Automatic Restart Procedure restart state. " ::= { auxRamanIfEntry 17 } auxRamanIfPumpsStatus OBJECT-TYPE SYNTAX INTEGER { shutdown (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows whether the pumps are active or not. " ::= { auxRamanIfEntry 18 } auxRamanIfTotalPumpsPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total power of the pumps. " ::= { auxRamanIfEntry 19 } auxRamanIfPump1WantedPower OBJECT-TYPE SYNTAX Unsigned32 (100..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "The wanted power of the higher pump. Used for manual configuration. " DEFVAL { 100 } ::= { auxRamanIfEntry 20 } auxRamanIfPump1ActualPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual power of the higher pump. " ::= { auxRamanIfEntry 21 } auxRamanIfPump1Current OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current of the higher pump. " ::= { auxRamanIfEntry 22 } auxRamanIfPump1Temperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the higher pump. " ::= { auxRamanIfEntry 23 } auxRamanIfPump2WantedPower OBJECT-TYPE SYNTAX Unsigned32 (100..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "The wanted power of the higher pump. Used for manual configuration. " DEFVAL { 100 } ::= { auxRamanIfEntry 24 } auxRamanIfPump2ActualPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual power of the higher pump. " ::= { auxRamanIfEntry 25 } auxRamanIfPump2Current OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current of the higher pump. " ::= { auxRamanIfEntry 26 } auxRamanIfPump2Temperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the higher pump. " ::= { auxRamanIfEntry 27 } auxRamanIfWantedGain OBJECT-TYPE SYNTAX Unsigned32 (30..200) MAX-ACCESS read-write STATUS current DESCRIPTION "The wanted gain. Used in gain-mode. " DEFVAL { 30 } ::= { auxRamanIfEntry 28 } auxRamanIfActualGain OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual gain. Used in gain-mode. " ::= { auxRamanIfEntry 29 } auxRamanIfReceivedPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received power on the line i/f. " ::= { auxRamanIfEntry 30 } auxRamanIfReflectionPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received reflection power. " ::= { auxRamanIfEntry 31 } auxRamanIfReflectionPowerRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received reflection power in relation to the power of the pumps. " ::= { auxRamanIfEntry 32 } auxRamanIf1510BandReceivedPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received power in the 1510 band. " ::= { auxRamanIfEntry 33 } auxRamanIfOscReceivedPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received power of the OSC channel. " ::= { auxRamanIfEntry 34 } auxRamanIfAPRState OBJECT-TYPE SYNTAX INTEGER { normal (1), shutdown (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the state of the Automatic Power Reduction procedure " ::= { auxRamanIfEntry 35 } auxRamanIfOscDitherState OBJECT-TYPE SYNTAX INTEGER { normal (1), lost (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the dithering state of the Optical Supervisiory Channel. " ::= { auxRamanIfEntry 36 } auxRamanIfLineLossOfSignal OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The input line signal is lost. " ::= { auxRamanIfEntry 37 } auxRamanIfOscDitherLos OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The dithering of the OSC channel is lost. " ::= { auxRamanIfEntry 38 } auxRamanIfHighBackReflection OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High back-reflection power detected. " ::= { auxRamanIfEntry 39 } auxRamanIfHighLineOutputPower OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High line output power is detected. The power is decreased not to exceed the maximum power " ::= { auxRamanIfEntry 40 } auxRamanIfLowLineOutputPower OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Low output power is detected. " ::= { auxRamanIfEntry 41 } auxRamanIfModuleTempTooHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Too high ambient temperature of the amplifier module causing shut down. " ::= { auxRamanIfEntry 42 } auxRamanIfModuleTempHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High ambient temperature of the amplifier module. Crossed warning threshold " ::= { auxRamanIfEntry 43 } auxRamanIfPumpsTempTooHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Too high temperature of the pumps causing shut down. " ::= { auxRamanIfEntry 44 } auxRamanIfPumpsTempHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High temperature of the pumps. Crossed warning threshold. " ::= { auxRamanIfEntry 45 } auxRamanIfAprShutdown OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the pumps have been shutdown according to any of the APR or ALS schemes. " ::= { auxRamanIfEntry 46 } auxRamanIfLineFiberDeteriorated OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The quality of the line fiber has changed (deteriorated). " ::= { auxRamanIfEntry 47 } auxRamanIf1510BandPowerLos OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The power of the 1510 band has been lost. " ::= { auxRamanIfEntry 48 } auxRamanIfManualRestartTrial OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Executing this procedure initiates a manual restart trial. " ::= { auxRamanIfEntry 49 } auxRamanIfModuleTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the ambient temperature of the amplifier module. " ::= { auxRamanIfEntry 50 } auxRamanIfTxSignalStatus OBJECT-TYPE SYNTAX INTEGER { down (1), degraded (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. " DEFVAL { up } ::= { auxRamanIfEntry 51 } auxRamanIfRxSignalStatus OBJECT-TYPE SYNTAX INTEGER { down (1), degraded (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. up - The signal is OK. " DEFVAL { up } ::= { auxRamanIfEntry 52 } -- ---------------------------------------------------- -- Aux safety group -- ---------------------------------------------------- auxRamanSafetyTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxRamanSafetyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of safety modules." ::= { auxRamanSafetyList 1 } auxRamanSafetyEntry OBJECT-TYPE SYNTAX AuxRamanSafetyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the safety list. " INDEX { auxRamanSafetyIndex } ::= { auxRamanSafetyTable 1 } AuxRamanSafetyEntry ::= SEQUENCE { auxRamanSafetyIndex Unsigned32, auxRamanSafetyName MgmtNameString, auxRamanSafetyDescr DisplayString, auxRamanSafetySubrack SubrackNumber, auxRamanSafetySlot SlotNumber, auxRamanSafetyRxPort PortNumber, auxRamanSafetyTxPort PortNumber, auxRamanSafetyInvPhysIndexOrZero Unsigned32, auxRamanSafetyObjectProperty ObjectProperty, auxRamanSafetyShutDownAtInputLoss INTEGER, auxRamanSafetyShutDownAtHighTemp INTEGER, auxRamanSafetyShutDownAtHighBackReflection INTEGER, auxRamanSafetyHighBackReflectionThreshold Integer32, auxRamanSafetyShutDownAtOscLoss INTEGER, auxRamanSafetyShutDownAt1510BandDrop INTEGER, auxRamanSafetyShutDownAtInputLossConfig CommandString, auxRamanSafetyShutDownAtHighTempConfig CommandString, auxRamanSafetyShutDownAtHighBackReflectionConfig CommandString, auxRamanSafetyShutDownAtOscLossConfig CommandString, auxRamanSafetyShutDownAt1510BandDropConfig CommandString, auxRamanSafetyPasswd DisplayString, auxRamanSafetyPasswdConfig CommandString, auxRamanSafety1510BandDropThreshold Integer32, auxRamanSafetyInhibitStartAtOscLoss INTEGER, auxRamanSafetyInhibitStartAtOscLossConfig CommandString, auxRamanSafetyShutDownAtLowBandDrop INTEGER, auxRamanSafetyLowBandScatteringThreshold Integer32, auxRamanSafetyShutDownAtLowBandDropConfig CommandString, auxRamanSafetyAmplifierSwitch INTEGER, auxRamanSafetyAmplifierSwitchConfig CommandString, auxRamanSafetyLowBandScatteringTolerance Integer32} auxRamanSafetyIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxRamanSafetyEntry 1 } auxRamanSafetyName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the ramanSafety object. " ::= { auxRamanSafetyEntry 2 } auxRamanSafetyDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxRamanSafetyEntry 3 } auxRamanSafetySubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { auxRamanSafetyEntry 4 } auxRamanSafetySlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { auxRamanSafetyEntry 5 } auxRamanSafetyTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxRamanSafetyEntry 6 } auxRamanSafetyRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxRamanSafetyEntry 7 } auxRamanSafetyInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { auxRamanSafetyEntry 8 } auxRamanSafetyObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask. " ::= { auxRamanSafetyEntry 9 } auxRamanSafetyShutDownAtInputLoss OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier will shut down in the following situation: Loss of input power " DEFVAL { enabled } ::= { auxRamanSafetyEntry 10 } auxRamanSafetyShutDownAtHighTemp OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier will shut down in the following situation: The temperature of the pumps or the modules is high. " DEFVAL { enabled } ::= { auxRamanSafetyEntry 11 } auxRamanSafetyShutDownAtHighBackReflection OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier will shut down in the following situation: There is a high back reflection of power, indication that there might be a fibre break. " DEFVAL { enabled } ::= { auxRamanSafetyEntry 12 } auxRamanSafetyHighBackReflectionThreshold OBJECT-TYPE SYNTAX Integer32 (-28..-19) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for back reflection causing amplifier pumps to shut down. The threshold is a ratio expressed in dB relative to the output power of the amplifier. " DEFVAL { -22 } ::= { auxRamanSafetyEntry 13 } auxRamanSafetyShutDownAtOscLoss OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier will shut down in the following situation: The signal from the OSC channel is lost. " DEFVAL { disabled } ::= { auxRamanSafetyEntry 14 } auxRamanSafetyShutDownAt1510BandDrop OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier will shut down in the following situation: The power from the 1510 band drops. " DEFVAL { enabled } ::= { auxRamanSafetyEntry 15 } auxRamanSafetyShutDownAtInputLossConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 16 } auxRamanSafetyShutDownAtHighTempConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 17 } auxRamanSafetyShutDownAtHighBackReflectionConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 18 } auxRamanSafetyShutDownAtOscLossConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 19 } auxRamanSafetyShutDownAt1510BandDropConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 20 } auxRamanSafetyPasswd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Password protecting the safety parameters If password is '-' (dash), then the password control is disabled. " DEFVAL { "-" } ::= { auxRamanSafetyEntry 21 } auxRamanSafetyPasswdConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 22 } auxRamanSafety1510BandDropThreshold OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for OSC band drop causing pumps shut down. " DEFVAL { 20 } ::= { auxRamanSafetyEntry 23 } auxRamanSafetyInhibitStartAtOscLoss OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier is allowed to turn on in a situation where the OSC is missing " DEFVAL { enabled } ::= { auxRamanSafetyEntry 24 } auxRamanSafetyInhibitStartAtOscLossConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 25 } auxRamanSafetyShutDownAtLowBandDrop OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter controls whether the amplifier will shut down in the following situation: Low L-band scattering is detected. " DEFVAL { enabled } ::= { auxRamanSafetyEntry 26 } auxRamanSafetyLowBandScatteringThreshold OBJECT-TYPE SYNTAX Integer32 (-450..-250) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for safety parameter 'Shut down at L-band power drop'. " DEFVAL { -370 } ::= { auxRamanSafetyEntry 27 } auxRamanSafetyShutDownAtLowBandDropConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 28 } auxRamanSafetyAmplifierSwitch OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable activating or disable of the pumps operation. When switch in Enabled mode, pumps are activated to last operation mode and power/current/gain settings " DEFVAL { disabled } ::= { auxRamanSafetyEntry 29 } auxRamanSafetyAmplifierSwitchConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION ". " ::= { auxRamanSafetyEntry 30 } auxRamanSafetyLowBandScatteringTolerance OBJECT-TYPE SYNTAX Integer32 (10..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The transient tolerance (expressed in dB) for safety parameter 'Shut down at L-band drop'. " DEFVAL { 15 } ::= { auxRamanSafetyEntry 31 } -- ---------------------------------------------------- -- Aux PE i/f group -- ---------------------------------------------------- auxPEIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxPEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of PE i/f." ::= { auxPEIfList 1 } auxPEIfEntry OBJECT-TYPE SYNTAX AuxPEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PE i/f list. " INDEX { auxPEIfIndex } ::= { auxPEIfTable 1 } AuxPEIfEntry ::= SEQUENCE { auxPEIfIndex Unsigned32, auxPEIfName MgmtNameString, auxPEIfDescr DisplayString, auxPEIfSubrack SubrackNumber, auxPEIfSlot SlotNumber, auxPEIfRxPort PortNumber, auxPEIfTxPort PortNumber, auxPEIfInvPhysIndexOrZero Unsigned32, auxPEIfAdminStatus BoardOrInterfaceAdminStatus, auxPEIfOperStatus BoardOrInterfaceOperStatus, auxPEIfObjectProperty ObjectProperty, auxPEIfPumpsOperationMode INTEGER, auxPEIfPumpsOperationModeConfig CommandString, auxPEIfAutoRestartProcTime Unsigned32, auxPEIfPumpsStatus INTEGER, auxPEIfWantedPower Integer32, auxPEIfWantedGain Unsigned32, auxPEIfPumpsTotalCurrent Unsigned32, auxPEIfPump1Temperature Integer32, auxPEIfActualGain Integer32, auxPEIfReceivedPowerLevel Integer32, auxPEIfCombinedOutPwrLevel Integer32, auxPEIfReflectionPowerLevel Integer32, auxPEIfReflectionPowerRatio Integer32, auxPEIfLowBandScatteredPowerLevel Integer32, auxPEIfLineLossOfSignal FaultStatus, auxPEIfHighBackReflection FaultStatus, auxPEIfAutoPowerReduction FaultStatus, auxPEIfLowLineOutputPower FaultStatus, auxPEIfModuleTempTooHigh FaultStatus, auxPEIfModuleTempHigh FaultStatus, auxPEIfPumpsTempTooHigh FaultStatus, auxPEIfPumpsTempHigh FaultStatus, auxPEIfModuleTemp Integer32, auxPEIfPump2Temperature Integer32} auxPEIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxPEIfEntry 1 } auxPEIfName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the FxIf. " ::= { auxPEIfEntry 2 } auxPEIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxPEIfEntry 3 } auxPEIfSubrack OBJECT-TYPE SYNTAX SubrackNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the subrack where the interface is located. " ::= { auxPEIfEntry 4 } auxPEIfSlot OBJECT-TYPE SYNTAX SlotNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the slot where the interface is located. " ::= { auxPEIfEntry 5 } auxPEIfTxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxPEIfEntry 6 } auxPEIfRxPort OBJECT-TYPE SYNTAX PortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port where the interface is located. " ::= { auxPEIfEntry 7 } auxPEIfInvPhysIndexOrZero OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The row in the invPhysTable for this interface. Set to 0 if not known. " ::= { auxPEIfEntry 8 } auxPEIfAdminStatus OBJECT-TYPE SYNTAX BoardOrInterfaceAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. " DEFVAL { up } ::= { auxPEIfEntry 9 } auxPEIfOperStatus OBJECT-TYPE SYNTAX BoardOrInterfaceOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it from going to the 'up'-state. up - The interface is active. " DEFVAL { notPresent } ::= { auxPEIfEntry 10 } auxPEIfObjectProperty OBJECT-TYPE SYNTAX ObjectProperty MAX-ACCESS read-only STATUS current DESCRIPTION "Property mask. " ::= { auxPEIfEntry 11 } auxPEIfPumpsOperationMode OBJECT-TYPE SYNTAX INTEGER { constantPower (1), constantGain (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "In constant power mode the desired power has to be set. In constant gain the desired output gain should be set. " DEFVAL { constantGain } ::= { auxPEIfEntry 12 } auxPEIfPumpsOperationModeConfig OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Configure pumps operational mode. In constant power mode the desired power has to be set. In constant gain mode the desired output gain should be set. " ::= { auxPEIfEntry 13 } auxPEIfAutoRestartProcTime OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic Restart Procedure restart time. " DEFVAL { 10 } ::= { auxPEIfEntry 14 } auxPEIfPumpsStatus OBJECT-TYPE SYNTAX INTEGER { shutdown (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows whether the pumps are active or not. " ::= { auxPEIfEntry 15 } auxPEIfWantedPower OBJECT-TYPE SYNTAX Integer32 (100..261) MAX-ACCESS read-write STATUS current DESCRIPTION "Output power setting for constant power operation mode. " DEFVAL { 170 } ::= { auxPEIfEntry 16 } auxPEIfWantedGain OBJECT-TYPE SYNTAX Unsigned32 (50..90) MAX-ACCESS read-write STATUS current DESCRIPTION "Required gain value in dB for constant gain operation mode. " DEFVAL { 62 } ::= { auxPEIfEntry 17 } auxPEIfPumpsTotalCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pumps total current " ::= { auxPEIfEntry 18 } auxPEIfPump1Temperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the higher pump. " ::= { auxPEIfEntry 19 } auxPEIfActualGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual gain of the Amplifier (deci-dB). " ::= { auxPEIfEntry 20 } auxPEIfReceivedPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Input Power (Forward mode) (deci-dBm). Please Note: Original value of Float type was transformed to an integer, therefore the MIB value is presented in deci-dBm. (i.e. 50.5 dBm transformed to 505 deci-dBm). Any EMS GUI should transform the value back to dBm value. " ::= { auxPEIfEntry 21 } auxPEIfCombinedOutPwrLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Line Interface combined Output Power (deci-dBm). Please Note: Original value of Float type was transformed to an integer, therefore the MIB value is presented in deci-dBm. (i.e. 50.5 dBm transformed to 505 deci-dBm). Any EMS GUI should transform the value back to dBm value. " ::= { auxPEIfEntry 22 } auxPEIfReflectionPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received reflection power. " ::= { auxPEIfEntry 23 } auxPEIfReflectionPowerRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received reflection power in relation to the power of the pumps. " ::= { auxPEIfEntry 24 } auxPEIfLowBandScatteredPowerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The scattered power in the L-band. " ::= { auxPEIfEntry 25 } auxPEIfLineLossOfSignal OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The input line signal is lost. " ::= { auxPEIfEntry 26 } auxPEIfHighBackReflection OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High back-reflection power detected. " ::= { auxPEIfEntry 27 } auxPEIfAutoPowerReduction OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Automatic Power Reduction " ::= { auxPEIfEntry 28 } auxPEIfLowLineOutputPower OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Low output power is detected. " ::= { auxPEIfEntry 29 } auxPEIfModuleTempTooHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Too high ambient temperature of the amplifier module causing shut down. " ::= { auxPEIfEntry 30 } auxPEIfModuleTempHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High ambient temperature of the amplifier module. Crossed warning threshold " ::= { auxPEIfEntry 31 } auxPEIfPumpsTempTooHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Too high temperature of the pumps causing shut down. " ::= { auxPEIfEntry 32 } auxPEIfPumpsTempHigh OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "High temperature of the pumps. Crossed warning threshold. " ::= { auxPEIfEntry 33 } auxPEIfModuleTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the ambient temperature of the amplifier module. " ::= { auxPEIfEntry 34 } auxPEIfPump2Temperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pump #2 temperature. " ::= { auxPEIfEntry 35 } -- ---------------------------------------------------- -- Aux Node group -- ---------------------------------------------------- auxNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of Node (TM2000) stuff." ::= { auxNodeList 1 } auxNodeEntry OBJECT-TYPE SYNTAX AuxNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Node list. " INDEX { auxNodeIndex } ::= { auxNodeTable 1 } AuxNodeEntry ::= SEQUENCE { auxNodeIndex Unsigned32, auxNodeName MgmtNameString, auxNodeDescr DisplayString, auxNodeIpAddress IpAddress, auxNodePort Unsigned32, auxNodeEventPort Unsigned32, auxNodeTime DateAndTime, auxNodeNtpPrimary IpAddress, auxNodeNtpSecondary IpAddress, auxNodeChangeLocalTime CommandString, auxNodeHostUnreachable FaultStatus} auxNodeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxNodeEntry 1 } auxNodeName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Node. " ::= { auxNodeEntry 2 } auxNodeDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxNodeEntry 3 } auxNodeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address for the TM2000 node. The default value is set to 10.0..11 at system start-up. " ::= { auxNodeEntry 4 } auxNodePort OBJECT-TYPE SYNTAX Unsigned32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The server port number for the TM2000 node. " DEFVAL { 49177 } ::= { auxNodeEntry 5 } auxNodeEventPort OBJECT-TYPE SYNTAX Unsigned32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The event port number for the TM2000 node. " DEFVAL { 50177 } ::= { auxNodeEntry 6 } auxNodeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of the TM2000 node. " ::= { auxNodeEntry 7 } auxNodeNtpPrimary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The primary NTP Server address. This will default be set to master CU IP address which is 10.0.1.1. " ::= { auxNodeEntry 8 } auxNodeNtpSecondary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The secondary NTP Server address. " ::= { auxNodeEntry 9 } auxNodeChangeLocalTime OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Change the local date and time. Year - If no century is input the current century is set by default. Month - 1 to 12 Day - 1 to 31 Hour - 0 to 23 Minute - 0 to 59 Second - 0 to 59 Note: Setting of the local time is disabled if either the primary or secondary time server is set. " ::= { auxNodeEntry 10 } auxNodeHostUnreachable OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Can not contact the remote external equipment. Check address and ports. A(ctivation): Contact lost D(e-activation): Contact established again " ::= { auxNodeEntry 11 } -- ---------------------------------------------------- -- Aux Cabinet group -- ---------------------------------------------------- auxCabinetTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxCabinetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of Cabinet stuff." ::= { auxCabinetList 1 } auxCabinetEntry OBJECT-TYPE SYNTAX AuxCabinetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Cabinet list. " INDEX { auxCabinetIndex } ::= { auxCabinetTable 1 } AuxCabinetEntry ::= SEQUENCE { auxCabinetIndex Unsigned32, auxCabinetName MgmtNameString, auxCabinetDescr DisplayString, auxCabinetAdminStatus AdminStatusWithNA, auxCabinetOperStatus INTEGER, auxCabinetUpId Unsigned32, auxCabinetIndoorTemp Signed32WithNA, auxCabinetOutdoorTemp Signed32WithNA, auxCabinetOperMode INTEGER, auxCabinetDoorAlarm FaultStatus, auxCabinetSPDAlarm FaultStatus, auxCabinetHighTempAlarm FaultStatus, auxCabinetCtrlFailAlarm FaultStatus, auxCabinetHeatFailAlarm FaultStatus, auxCabinetExtTempFailAlarm FaultStatus, auxCabinetIntTempFailAlarm FaultStatus} auxCabinetIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxCabinetEntry 1 } auxCabinetName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the cabinet. " ::= { auxCabinetEntry 2 } auxCabinetDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxCabinetEntry 3 } auxCabinetAdminStatus OBJECT-TYPE SYNTAX AdminStatusWithNA MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the cabinet. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be raised from this object. up - The interface will be activated when available. Alarms are not suppressed. " DEFVAL { up } ::= { auxCabinetEntry 4 } auxCabinetOperStatus OBJECT-TYPE SYNTAX INTEGER { notPresent (1), down (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Cabinet operational status " ::= { auxCabinetEntry 5 } auxCabinetUpId OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Identity in the UP for the auxCabinet entry in the traffic unit " DEFVAL { 0 } ::= { auxCabinetEntry 6 } auxCabinetIndoorTemp OBJECT-TYPE SYNTAX Signed32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The indoor temperature in the cabinet in 0.1 degrees centigrade. " ::= { auxCabinetEntry 7 } auxCabinetOutdoorTemp OBJECT-TYPE SYNTAX Signed32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The outdoor temperature in the cabinet in 0.1 degrees centigrade. " ::= { auxCabinetEntry 8 } -- The operating mode enum is defined in document PSAB 15:152 auxCabinetOperMode OBJECT-TYPE SYNTAX INTEGER { off (0), cooling (1), heating (2), nightmode (3), tsf (4), selftest (5), manual (6)} MAX-ACCESS read-only STATUS current DESCRIPTION "Cabinet operating mode " ::= { auxCabinetEntry 9 } auxCabinetDoorAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: The cabinet door is opened. OK: The cabinet door is closed. " ::= { auxCabinetEntry 10 } auxCabinetSPDAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: Surge Protection Device alarm. OK: Surge Protection Device ok. " ::= { auxCabinetEntry 11 } auxCabinetHighTempAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: Cabinet temperature too high. OK: Cabinet temperature ok. " ::= { auxCabinetEntry 12 } auxCabinetCtrlFailAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: Cabinet controller failure. OK: Cabinet controller ok. " ::= { auxCabinetEntry 13 } auxCabinetHeatFailAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: Cabinet heater failure. OK: Cabinet heater ok. " ::= { auxCabinetEntry 14 } auxCabinetExtTempFailAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: Cabinet external temp sensor failure. OK: Cabinet external temp sensor ok. " ::= { auxCabinetEntry 15 } auxCabinetIntTempFailAlarm OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: Cabinet internal temp sensor failure. OK: Cabinet internal temp sensor ok. " ::= { auxCabinetEntry 16 } -- ---------------------------------------------------- -- Aux Fan group -- ---------------------------------------------------- auxFanTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Fans." ::= { auxFanList 1 } auxFanEntry OBJECT-TYPE SYNTAX AuxFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Fan list. " INDEX { auxFanIndex } ::= { auxFanTable 1 } AuxFanEntry ::= SEQUENCE { auxFanIndex Unsigned32, auxFanName MgmtNameString, auxFanDescr DisplayString, auxFanAdminStatus AdminStatusWithNA, auxFanOperStatus INTEGER, auxFanUpId Unsigned32, auxFanFailure FaultStatus, auxFanRPM Signed32WithNA} auxFanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxFanEntry 1 } auxFanName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the fan. " ::= { auxFanEntry 2 } auxFanDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxFanEntry 3 } auxFanAdminStatus OBJECT-TYPE SYNTAX AdminStatusWithNA MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the fan. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be raised from this object. up - The interface will be activated when available. Alarms are not suppressed. " DEFVAL { up } ::= { auxFanEntry 4 } auxFanOperStatus OBJECT-TYPE SYNTAX INTEGER { notPresent (1), down (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Fan operational status " ::= { auxFanEntry 5 } auxFanUpId OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Identity in the UP for the auxFan entry in the traffic unit " DEFVAL { 0 } ::= { auxFanEntry 6 } auxFanFailure OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: The fan has failed. OK: The fan is ok. " ::= { auxFanEntry 7 } auxFanRPM OBJECT-TYPE SYNTAX Signed32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The fan RPM. " ::= { auxFanEntry 8 } -- ---------------------------------------------------- -- Aux Fan Group group -- ---------------------------------------------------- auxFanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AuxFanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of FanGroups." ::= { auxFanGroupList 1 } auxFanGroupEntry OBJECT-TYPE SYNTAX AuxFanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the FanGroup list. " INDEX { auxFanGroupIndex } ::= { auxFanGroupTable 1 } AuxFanGroupEntry ::= SEQUENCE { auxFanGroupIndex Unsigned32, auxFanGroupName MgmtNameString, auxFanGroupDescr DisplayString, auxFanGroupAdminStatus AdminStatusWithNA, auxFanGroupOperStatus INTEGER, auxFanGroupUpId Unsigned32, auxFanGroupFailure FaultStatus} auxFanGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each configuration equipment. " ::= { auxFanGroupEntry 1 } auxFanGroupName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the fan group. " ::= { auxFanGroupEntry 2 } auxFanGroupDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable label. " DEFVAL { "" } ::= { auxFanGroupEntry 3 } auxFanGroupAdminStatus OBJECT-TYPE SYNTAX AdminStatusWithNA MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the fan group. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be raised from this object. up - The interface will be activated when available. Alarms are not suppressed. " DEFVAL { up } ::= { auxFanGroupEntry 4 } auxFanGroupOperStatus OBJECT-TYPE SYNTAX INTEGER { notPresent (1), down (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "FanGroup operational status " ::= { auxFanGroupEntry 5 } auxFanGroupUpId OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Identity in the UP for the auxFanGroup entry in the traffic unit " DEFVAL { 0 } ::= { auxFanGroupEntry 6 } auxFanGroupFailure OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm: The fan group has failed. OK: The fan group is ok. " ::= { auxFanGroupEntry 7 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- auxGeneralGroup OBJECT-GROUP OBJECTS { auxGeneralTestAndIncr, auxGeneralStateLastChangeTime, auxGeneralConfigLastChangeTime, auxGeneralSnmpTableSize, auxGeneralFxIfTableSize, auxGeneralAuxEquipmentTableSize } STATUS deprecated DESCRIPTION "The aux general objects." ::= { lumAuxGroups 1 } auxSnmpGroup OBJECT-GROUP OBJECTS { auxSnmpIndex, auxSnmpName, auxSnmpDescr, auxSnmpAddress, auxSnmpPort, auxSnmpVersion, auxSnmpReadCommunity, auxSnmpWriteCommunity, auxSnmpAdminStatus, auxSnmpOperStatus, auxSnmpInvPhysIndexOrZero, auxSnmpHostUnreachable, auxSnmpSnmpError, auxSnmpUnexpectedEquipmentType, auxSnmpInconsistentConfiguration } STATUS deprecated DESCRIPTION "The aux equipment objects." ::= { lumAuxGroups 2 } auxFxIfGroup OBJECT-GROUP OBJECTS { auxFxIfIndex, auxFxIfName, auxFxIfDescr, auxFxIfSubrack, auxFxIfSlot, auxFxIfRxPort, auxFxIfTxPort, auxFxIfInvPhysIndexOrZero, auxFxIfAdminStatus, auxFxIfOperStatus, auxFxIfRxPowerLevel, auxFxIfLossOfSignalThreshold, auxFxIfLossOfSignal } STATUS deprecated DESCRIPTION "The aux OAS module objects." ::= { lumAuxGroups 3 } auxEquipmentGroup OBJECT-GROUP OBJECTS { auxEquipmentIndex, auxEquipmentName, auxEquipmentDescr, auxEquipmentSubrack, auxEquipmentSlot, -- auxEquipmentInvPhysIndexOrZero, auxEquipmentAdminStatus, auxEquipmentOperStatus, auxEquipmentPowerFailure, auxEquipmentFanProblem } STATUS deprecated DESCRIPTION "The aux OAS module objects." ::= { lumAuxGroups 4 } auxFxIfGroupV2 OBJECT-GROUP OBJECTS { auxFxIfIndex, auxFxIfName, auxFxIfDescr, auxFxIfSubrack, auxFxIfSlot, auxFxIfRxPort, auxFxIfTxPort, auxFxIfInvPhysIndexOrZero, auxFxIfAdminStatus, auxFxIfOperStatus, auxFxIfRxPowerLevel, auxFxIfLossOfSignalThreshold, auxFxIfLossOfSignal, auxFxIfObjectProperty } STATUS current DESCRIPTION "The aux OAS module objects (4.0)." ::= { lumAuxGroups 5 } auxEquipmentGroupV2 OBJECT-GROUP OBJECTS { auxEquipmentIndex, auxEquipmentName, auxEquipmentDescr, auxEquipmentSubrack, auxEquipmentSlot, -- auxEquipmentInvPhysIndexOrZero, auxEquipmentAdminStatus, auxEquipmentOperStatus, auxEquipmentPowerFailure, auxEquipmentFanProblem, auxEquipmentObjectProperty } STATUS deprecated DESCRIPTION "The aux OAS module objects (4.0)." ::= { lumAuxGroups 6 } auxRamanIfGroupV1 OBJECT-GROUP OBJECTS { auxRamanIfIndex, auxRamanIfName, auxRamanIfDescr, auxRamanIfSubrack, auxRamanIfSlot, auxRamanIfRxPort, auxRamanIfTxPort, auxRamanIfInvPhysIndexOrZero, auxRamanIfAdminStatus, auxRamanIfOperStatus, auxRamanIfObjectProperty, auxRamanIfPumpsOperationMode, auxRamanIfModuleOperationMode, auxRamanIfPumpsOperationModeConfig, auxRamanIfLineFiberType, auxRamanIfAutoRestartProcTime, auxRamanIfArpPauseStatus, auxRamanIfPumpsStatus, auxRamanIfTotalPumpsPower, auxRamanIfPump1WantedPower, auxRamanIfPump1ActualPower, auxRamanIfPump1Current, auxRamanIfPump1Temperature, auxRamanIfPump2WantedPower, auxRamanIfPump2ActualPower, auxRamanIfPump2Current, auxRamanIfPump2Temperature, auxRamanIfWantedGain, auxRamanIfActualGain, auxRamanIfReceivedPowerLevel, auxRamanIfReflectionPowerLevel, auxRamanIfReflectionPowerRatio, auxRamanIf1510BandReceivedPowerLevel, auxRamanIfOscReceivedPowerLevel, auxRamanIfManualRestartTrial, auxRamanIfModuleTemp } STATUS deprecated DESCRIPTION "The aux RAMAN module objects (6.1)." ::= { lumAuxGroups 7 } auxRamanSafetyGroupV1 OBJECT-GROUP OBJECTS { auxRamanSafetyIndex, auxRamanSafetyName, auxRamanSafetyDescr, auxRamanSafetySubrack, auxRamanSafetySlot, auxRamanSafetyRxPort, auxRamanSafetyTxPort, auxRamanSafetyInvPhysIndexOrZero, --auxRamanSafetyAdminStatus, --auxRamanSafetyOperStatus, auxRamanSafetyObjectProperty, auxRamanSafetyShutDownAtInputLoss, auxRamanSafetyShutDownAtHighTemp, auxRamanSafetyShutDownAtHighBackReflection, auxRamanSafetyHighBackReflectionThreshold, auxRamanSafetyShutDownAtOscLoss, auxRamanSafetyShutDownAt1510BandDrop, auxRamanSafetyShutDownAtInputLossConfig, auxRamanSafetyShutDownAtHighTempConfig, auxRamanSafetyShutDownAtHighBackReflectionConfig, auxRamanSafetyShutDownAtOscLossConfig, auxRamanSafetyShutDownAt1510BandDropConfig, auxRamanSafetyPasswd, auxRamanSafetyPasswdConfig, auxRamanSafety1510BandDropThreshold, auxRamanSafetyInhibitStartAtOscLoss, auxRamanSafetyInhibitStartAtOscLossConfig } STATUS deprecated DESCRIPTION "The aux RAMAN module objects (6.1)." ::= { lumAuxGroups 8 } auxEquipmentGroupV3 OBJECT-GROUP OBJECTS { auxEquipmentIndex, auxEquipmentName, auxEquipmentDescr, auxEquipmentSubrack, auxEquipmentSlot, -- auxEquipmentInvPhysIndexOrZero, auxEquipmentAdminStatus, auxEquipmentOperStatus, auxEquipmentPowerFailure, auxEquipmentFanProblem, auxEquipmentObjectProperty, auxEquipmentPumpsEol, auxEquipmentSelfTestFailure, auxEquipmentAmbientTemp, auxEquipmentRebootEquipment } STATUS deprecated DESCRIPTION "The aux equipment module objects (6.1)." ::= { lumAuxGroups 9 } auxSnmpGroupV2 OBJECT-GROUP OBJECTS { auxSnmpIndex, auxSnmpName, auxSnmpDescr, auxSnmpAddress, auxSnmpPort, auxSnmpVersion, auxSnmpReadCommunity, auxSnmpWriteCommunity, auxSnmpAdminStatus, auxSnmpOperStatus, auxSnmpInvPhysIndexOrZero, auxSnmpHostUnreachable, auxSnmpSnmpError, auxSnmpUnexpectedEquipmentType, auxSnmpInconsistentConfiguration, auxSnmpConfigurationProblem } STATUS current DESCRIPTION "The aux snmp objects V2 (6.1)." ::= { lumAuxGroups 10 } auxRamanSafetyGroupV2 OBJECT-GROUP OBJECTS { auxRamanSafetyIndex, auxRamanSafetyName, auxRamanSafetyDescr, auxRamanSafetySubrack, auxRamanSafetySlot, auxRamanSafetyRxPort, auxRamanSafetyTxPort, auxRamanSafetyInvPhysIndexOrZero, auxRamanSafetyObjectProperty, auxRamanSafetyShutDownAtInputLoss, auxRamanSafetyShutDownAtHighTemp, auxRamanSafetyShutDownAtHighBackReflection, auxRamanSafetyHighBackReflectionThreshold, auxRamanSafetyShutDownAtOscLoss, auxRamanSafetyShutDownAt1510BandDrop, auxRamanSafetyShutDownAtInputLossConfig, auxRamanSafetyShutDownAtHighTempConfig, auxRamanSafetyShutDownAtHighBackReflectionConfig, auxRamanSafetyShutDownAtOscLossConfig, auxRamanSafetyShutDownAt1510BandDropConfig, auxRamanSafetyPasswd, auxRamanSafetyPasswdConfig, auxRamanSafety1510BandDropThreshold, auxRamanSafetyInhibitStartAtOscLoss, auxRamanSafetyInhibitStartAtOscLossConfig, auxRamanSafetyShutDownAtLowBandDrop, auxRamanSafetyLowBandScatteringThreshold, auxRamanSafetyShutDownAtLowBandDropConfig, auxRamanSafetyAmplifierSwitch, auxRamanSafetyAmplifierSwitchConfig, auxRamanSafetyLowBandScatteringTolerance} STATUS current DESCRIPTION "The aux safety module objects (6.1)." ::= { lumAuxGroups 11 } auxPEIfGroupV1 OBJECT-GROUP OBJECTS{ auxPEIfIndex, auxPEIfName, auxPEIfDescr, auxPEIfSubrack, auxPEIfSlot, auxPEIfRxPort, auxPEIfTxPort, auxPEIfInvPhysIndexOrZero, auxPEIfAdminStatus, auxPEIfOperStatus, auxPEIfObjectProperty, auxPEIfPumpsOperationMode, auxPEIfPumpsOperationModeConfig, auxPEIfAutoRestartProcTime, auxPEIfPumpsStatus, auxPEIfWantedPower, auxPEIfWantedGain, auxPEIfPumpsTotalCurrent, auxPEIfPump1Temperature, auxPEIfActualGain, auxPEIfReceivedPowerLevel, auxPEIfReflectionPowerLevel, auxPEIfReflectionPowerRatio, auxPEIfLowBandScatteredPowerLevel, auxPEIfLineLossOfSignal, auxPEIfHighBackReflection, auxPEIfAutoPowerReduction, auxPEIfLowLineOutputPower, auxPEIfModuleTempTooHigh, auxPEIfModuleTempHigh, auxPEIfPumpsTempTooHigh, auxPEIfPumpsTempHigh, auxPEIfModuleTemp, auxPEIfPump2Temperature} STATUS current DESCRIPTION "the aux PE If module objects (6.1)." ::={ lumAuxGroups 12 } auxEquipmentGroupV4 OBJECT-GROUP OBJECTS { auxEquipmentIndex, auxEquipmentName, auxEquipmentDescr, auxEquipmentSubrack, auxEquipmentSlot, -- auxEquipmentInvPhysIndexOrZero, auxEquipmentAdminStatus, auxEquipmentOperStatus, auxEquipmentPowerFailure, auxEquipmentFanProblem, auxEquipmentObjectProperty, auxEquipmentPumpsEol, auxEquipmentSelfTestFailure, auxEquipmentAmbientTemp, auxEquipmentRebootEquipment, auxEquipmentPowerAMissing, auxEquipmentPowerBMissing} STATUS deprecated DESCRIPTION "The aux equipment module objects (6.1)." ::= { lumAuxGroups 13 } auxEquipmentGroupV5 OBJECT-GROUP OBJECTS { auxEquipmentIndex, auxEquipmentName, auxEquipmentDescr, auxEquipmentSubrack, auxEquipmentSlot, -- auxEquipmentInvPhysIndexOrZero, auxEquipmentAdminStatus, auxEquipmentOperStatus, auxEquipmentPowerFailure, auxEquipmentFanProblem, auxEquipmentObjectProperty, auxEquipmentPumpsEol, auxEquipmentSelfTestFailure, auxEquipmentAmbientTemp, auxEquipmentRebootEquipment, auxEquipmentPowerAMissing, auxEquipmentPowerBMissing, auxEquipmentConfigurationMismatch} STATUS current DESCRIPTION "The aux equipment module objects (6.1)." ::= { lumAuxGroups 14 } auxNodeGroupV1 OBJECT-GROUP OBJECTS{ auxNodeIndex, auxNodeName, auxNodeDescr, auxNodeIpAddress, auxNodePort, auxNodeEventPort, auxNodeTime, auxNodeNtpPrimary, auxNodeNtpSecondary, auxNodeChangeLocalTime, auxNodeHostUnreachable } STATUS current DESCRIPTION "The aux node module objects, e.g. used for TM2000 (6.1)." ::={ lumAuxGroups 15 } auxRamanIfGroupV2 OBJECT-GROUP OBJECTS { auxRamanIfIndex, auxRamanIfName, auxRamanIfDescr, auxRamanIfSubrack, auxRamanIfSlot, auxRamanIfRxPort, auxRamanIfTxPort, auxRamanIfInvPhysIndexOrZero, auxRamanIfAdminStatus, auxRamanIfOperStatus, auxRamanIfObjectProperty, auxRamanIfPumpsOperationMode, auxRamanIfModuleOperationMode, auxRamanIfPumpsOperationModeConfig, auxRamanIfLineFiberType, auxRamanIfAutoRestartProcTime, auxRamanIfArpPauseStatus, auxRamanIfPumpsStatus, auxRamanIfTotalPumpsPower, auxRamanIfPump1WantedPower, auxRamanIfPump1ActualPower, auxRamanIfPump1Current, auxRamanIfPump1Temperature, auxRamanIfPump2WantedPower, auxRamanIfPump2ActualPower, auxRamanIfPump2Current, auxRamanIfPump2Temperature, auxRamanIfWantedGain, auxRamanIfActualGain, auxRamanIfReceivedPowerLevel, auxRamanIfReflectionPowerLevel, auxRamanIfReflectionPowerRatio, auxRamanIf1510BandReceivedPowerLevel, auxRamanIfOscReceivedPowerLevel, auxRamanIfManualRestartTrial, auxRamanIfModuleTemp, auxRamanIfTxSignalStatus, auxRamanIfRxSignalStatus } STATUS current DESCRIPTION "The aux RAMAN module objects (6.1)." ::= { lumAuxGroups 16 } auxGeneralGroupV2 OBJECT-GROUP OBJECTS { auxGeneralTestAndIncr, auxGeneralStateLastChangeTime, auxGeneralConfigLastChangeTime, auxGeneralSnmpTableSize, auxGeneralFxIfTableSize, auxGeneralAuxEquipmentTableSize, auxGeneralRamanIfTableSize, auxGeneralRamanSafetyTableSize, auxGeneralPEIfTableSize, auxGeneralNodeTableSize, auxGeneralCabinetTableSize, auxGeneralFanTableSize, auxGeneralFanGroupTableSize } STATUS current DESCRIPTION "The aux general objects." ::= { lumAuxGroups 17 } auxCabinetGroupV1 OBJECT-GROUP OBJECTS{ auxCabinetIndex, auxCabinetName, auxCabinetDescr, auxCabinetAdminStatus, auxCabinetOperStatus, auxCabinetUpId, auxCabinetIndoorTemp, auxCabinetOutdoorTemp, auxCabinetOperMode, auxCabinetDoorAlarm, auxCabinetSPDAlarm, auxCabinetHighTempAlarm, auxCabinetCtrlFailAlarm, auxCabinetHeatFailAlarm, auxCabinetExtTempFailAlarm, auxCabinetIntTempFailAlarm} STATUS current DESCRIPTION "The aux Cabinet module objects (28.1)." ::={ lumAuxGroups 18 } auxFanGroupV1 OBJECT-GROUP OBJECTS{ auxFanIndex, auxFanName, auxFanDescr, auxFanAdminStatus, auxFanOperStatus, auxFanUpId, auxFanFailure, auxFanRPM} STATUS current DESCRIPTION "The aux Fan module objects (27.1)." ::={ lumAuxGroups 19 } auxFanGroupGroupV1 OBJECT-GROUP OBJECTS{ auxFanGroupIndex, auxFanGroupName, auxFanGroupDescr, auxFanGroupAdminStatus, auxFanGroupOperStatus, auxFanGroupUpId, auxFanGroupFailure} STATUS current DESCRIPTION "The aux FanGroup module objects (27.1)." ::={ lumAuxGroups 20 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumAuxBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v1. (3.1)" MODULE MANDATORY-GROUPS { auxGeneralGroup, auxSnmpGroup, auxFxIfGroup, auxEquipmentGroup } ::= { lumAuxCompl 1 } lumAuxBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v2. (4.0)" MODULE MANDATORY-GROUPS { auxGeneralGroup, auxSnmpGroup, auxFxIfGroupV2, auxEquipmentGroupV2 } ::= { lumAuxCompl 2 } lumAuxBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v3. (6.1)" MODULE MANDATORY-GROUPS { auxGeneralGroup, auxSnmpGroupV2, auxFxIfGroupV2, auxEquipmentGroupV3, auxRamanIfGroupV1, auxRamanSafetyGroupV1 } ::= { lumAuxCompl 3 } lumAuxBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v4. (6.1)" MODULE MANDATORY-GROUPS { auxGeneralGroup, auxSnmpGroupV2, auxFxIfGroupV2, auxEquipmentGroupV4, auxRamanIfGroupV1, auxRamanSafetyGroupV2, auxPEIfGroupV1} ::= { lumAuxCompl 4 } lumAuxBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v5. (6.1)" MODULE MANDATORY-GROUPS { auxGeneralGroup, auxSnmpGroupV2, auxFxIfGroupV2, auxEquipmentGroupV5, auxRamanIfGroupV1, auxRamanSafetyGroupV2, auxPEIfGroupV1, auxNodeGroupV1} ::= { lumAuxCompl 5 } lumAuxBasicComplV6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v5. (6.1)" MODULE MANDATORY-GROUPS { auxGeneralGroup, auxSnmpGroupV2, auxFxIfGroupV2, auxEquipmentGroupV5, auxRamanIfGroupV2, auxRamanSafetyGroupV2, auxPEIfGroupV1, auxNodeGroupV1} ::= { lumAuxCompl 6 } lumAuxBasicComplV7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the aux MIB v7. (27.1)" MODULE MANDATORY-GROUPS { auxGeneralGroupV2, auxSnmpGroupV2, auxFxIfGroupV2, auxEquipmentGroupV5, auxRamanIfGroupV2, auxRamanSafetyGroupV2, auxPEIfGroupV1, auxNodeGroupV1, auxCabinetGroupV1, auxFanGroupV1, auxFanGroupGroupV1} ::= { lumAuxCompl 7 } lumAuxBasicComplV8 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the aux MIB v8. (30.1)" MODULE MANDATORY-GROUPS { auxGeneralGroupV2, auxSnmpGroupV2, auxFxIfGroupV2, auxEquipmentGroupV5, auxRamanIfGroupV2, auxRamanSafetyGroupV2, auxPEIfGroupV1, auxNodeGroupV1, auxCabinetGroupV1, auxFanGroupV1, auxFanGroupGroupV1} ::= { lumAuxCompl 8 } END