-- ***************************************************************** -- INFINERA-PM-SDHCLIENTCTP-MIB -- -- October 2008, Sharfuddin Syed / Narendra Gupta -- -- -- Copyright (c) 2008-2012 by Infinera Inc. -- All rights reserved. -- **************************************************************** INFINERA-PM-SDHCLIENTCTP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, TruthValue FROM SNMPv2-TC ifIndex FROM IF-MIB HCPerfIntervalCount FROM HC-PerfHist-TC-MIB FloatHundredths,InfnServiceType, FloatArbitraryPrecision FROM INFINERA-TC-MIB commonPerfMon FROM INFINERA-REG-MIB; sdhClientCtpPmMIB MODULE-IDENTITY LAST-UPDATED "200810200000Z" ORGANIZATION "Infinera" CONTACT-INFO "Infinera 1322 Bordeaux Drive Sunnyvale, CA - 94089 Contact : Technical Support Email : support@infinera.com Phone : 1-877-INF-5288" DESCRIPTION " " REVISION "200810200000Z" DESCRIPTION "First Version" ::= { commonPerfMon 1 } sdhClientCtpPmTable OBJECT-TYPE SYNTAX SEQUENCE OF SdhClientCtpPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SdhClientCtpPm entries. Each entry is uniquely identified by the value of ifIndex, sampleDuration and sdhClientCtpPmTimestamp." ::= { sdhClientCtpPmMIB 2 } sdhClientCtpPmEntry OBJECT-TYPE SYNTAX SdhClientCtpPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A SdhClientCtp entry containing historical performance information pertaining to Infinera SdhClientCtp interfaces. Entries will exist in this table for interfaces of type sdhclientCtp. Each interface may have a number of entries in this table, each with a different combination of timestamp and sample duration." INDEX { ifIndex, sdhClientCtpPmSampleDuration, sdhClientCtpPmTimestamp } ::= { sdhClientCtpPmTable 1 } SdhClientCtpPmEntry ::= SEQUENCE { sdhClientCtpPmTimestamp Integer32, sdhClientCtpPmSampleDuration INTEGER, sdhClientCtpPmValidity TruthValue, sdhClientCtpPmRxBE HCPerfIntervalCount, sdhClientCtpPmRxES Integer32, sdhClientCtpPmRxSES Integer32, sdhClientCtpPmRxOFS Integer32, sdhClientCtpPmRxLOSS Integer32, sdhClientCtpPmTxBE HCPerfIntervalCount, sdhClientCtpPmTxES Integer32, sdhClientCtpPmTxSES Integer32, sdhClientCtpPmTxOFS Integer32, sdhClientCtpPmCktId DisplayString, sdhClientCtpPmTribPRBSSyncErr Integer32, sdhClientCtpPmTribPRBSErr HCPerfIntervalCount, sdhClientCtpPmPayloadType InfnServiceType, sdhClientCtpPmRxUAS Integer32, sdhClientCtpPmTxUAS Integer32, sdhClientCtpPmLinePRBSSyncErr Integer32, sdhClientCtpPmLinePRBSErr HCPerfIntervalCount } sdhClientCtpPmTimestamp OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "End Time stamp for this interval. If this time is later than the current time, then the data for this bucket is currently being collected." ::= { sdhClientCtpPmEntry 1 } sdhClientCtpPmSampleDuration OBJECT-TYPE SYNTAX INTEGER { fifteenMinutes(1), day(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The duration of this sample." ::= { sdhClientCtpPmEntry 2 } sdhClientCtpPmValidity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag indicating if data was valid for the entire interval" ::= { sdhClientCtpPmEntry 3 } sdhClientCtpPmRxBE OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors within a block in the incoming client’s SDH signal. All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate." ::= { sdhClientCtpPmEntry 4 } sdhClientCtpPmRxES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds during which (at any point during the second) at least one RS block error was detected or an LOS or LOF defect is present." ::= { sdhClientCtpPmEntry 5 } sdhClientCtpPmRxSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the seconds during which 30% or more RS block errors (BE) were detected or an LOF or LOS defect was present." ::= { sdhClientCtpPmEntry 6 } sdhClientCtpPmRxOFS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Out of Frame Seconds. Count of seconds during which an OOF defect is present (at any point in the second)." ::= { sdhClientCtpPmEntry 7 } sdhClientCtpPmRxLOSS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Loss of Signal Seconds. Count of seconds during which any LOS defect (OLOS or dLOS) existed." ::= { sdhClientCtpPmEntry 8 } sdhClientCtpPmTxBE OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors within a block in the SDH signal received from the network and to be transmitted to the receiving client. All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate." ::= { sdhClientCtpPmEntry 9 } sdhClientCtpPmTxES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds during which (at any point during the second) at least one Tx RS block error was detected or a de-encap (Tx) LOS or LOF defect was present." ::= { sdhClientCtpPmEntry 10 } sdhClientCtpPmTxSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the seconds during which 30% or more Tx RS block errors (BE) were detected or a de-encap (Tx) LOF or LOS defect was present." ::= { sdhClientCtpPmEntry 11 } sdhClientCtpPmTxOFS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Out of Frame Seconds. Count of seconds during which a de-encap (Tx) OOF defect was present." ::= { sdhClientCtpPmEntry 12 } sdhClientCtpPmCktId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Circuit ID(s) of the connection created on the SDH termination point." ::= { sdhClientCtpPmEntry 13 } sdhClientCtpPmTribPRBSSyncErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Trib PRBS monitoring is enabled." ::= { sdhClientCtpPmEntry 14 } sdhClientCtpPmTribPRBSErr OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incre mented only when Trib PRBS monitoring is enabled." ::= { sdhClientCtpPmEntry 15 } sdhClientCtpPmPayloadType OBJECT-TYPE SYNTAX InfnServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "The payload type." ::= { sdhClientCtpPmEntry 16 } sdhClientCtpPmRxUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the Unavailable seconds." ::= { sdhClientCtpPmEntry 17 } sdhClientCtpPmTxUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the Unavailable seconds." ::= { sdhClientCtpPmEntry 18 } sdhClientCtpPmLinePRBSSyncErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Line PRBS monitoring is enabled." ::= { sdhClientCtpPmEntry 19 } sdhClientCtpPmLinePRBSErr OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incre mented only when Line PRBS monitoring is enabled." ::= { sdhClientCtpPmEntry 20 } sdhClientCtpPmRealTable OBJECT-TYPE SYNTAX SEQUENCE OF SdhClientCtpPmRealEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SdhClientCtpPmReal entries. Each entry is uniquely identified by the value of ifIndex." ::= { sdhClientCtpPmMIB 1 } sdhClientCtpPmRealEntry OBJECT-TYPE SYNTAX SdhClientCtpPmRealEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A SdhClientCtp entry containing real-time performance information pertaining to Infinera SdhClientCtp interfaces. Entries will exist in this table for interfaces of type sdhclientCtp." INDEX { ifIndex } ::= { sdhClientCtpPmRealTable 1 } SdhClientCtpPmRealEntry ::= SEQUENCE { sdhClientCtpPmRealRxBE Counter64, sdhClientCtpPmRealRxES Integer32, sdhClientCtpPmRealRxSES Integer32, sdhClientCtpPmRealRxOFS Integer32, sdhClientCtpPmRealRxLOSS Integer32, sdhClientCtpPmRealTxBE Counter64, sdhClientCtpPmRealTxES Integer32, sdhClientCtpPmRealTxSES Integer32, sdhClientCtpPmRealTxOFS Integer32, sdhClientCtpPmRealCktId DisplayString, sdhClientCtpPmRealLinePRBSSyncErr Integer32, sdhClientCtpPmRealLinePRBSErr HCPerfIntervalCount, sdhClientCtpPmRealTribPRBSSyncErr Integer32, sdhClientCtpPmRealTribPRBSErr HCPerfIntervalCount, sdhClientCtpPmRealRxUAS Integer32, sdhClientCtpPmRealTxUAS Integer32, sdhClientCtpPmRealRxBER FloatArbitraryPrecision, sdhClientCtpPmRealTxBER FloatArbitraryPrecision } sdhClientCtpPmRealRxBE OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors within a block in the incoming client’s SDH signal. All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate." ::= { sdhClientCtpPmRealEntry 1 } sdhClientCtpPmRealRxES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds during which (at any point during the second) at least one RS block error was detected or an LOS or LOF defect is present." ::= { sdhClientCtpPmRealEntry 2 } sdhClientCtpPmRealRxSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the seconds during which 30% or more RS block errors (BE) were detected or an LOF or LOS defect was present." ::= { sdhClientCtpPmRealEntry 3 } sdhClientCtpPmRealRxOFS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Out of Frame Seconds. Count of seconds during which an OOF defect is present (at any point in the second)." ::= { sdhClientCtpPmRealEntry 4 } sdhClientCtpPmRealRxLOSS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Loss of Signal Seconds. Count of seconds during which any LOS defect (OLOS or dLOS) existed." ::= { sdhClientCtpPmRealEntry 5 } sdhClientCtpPmRealTxBE OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors within a block in the SDH signal received from the network and to be transmitted to the receiving client. NOTE: All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate." ::= { sdhClientCtpPmRealEntry 6 } sdhClientCtpPmRealTxES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds during which (at any point during the second) at least one Tx RS block error was detected or a de-encap (Tx) LOS or LOF defect was present." ::= { sdhClientCtpPmRealEntry 7 } sdhClientCtpPmRealTxSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the seconds during which 30% or more Tx RS block errors (BE) were detected or a de-encap (Tx) LOF or LOS defect was present." ::= { sdhClientCtpPmRealEntry 8 } sdhClientCtpPmRealTxOFS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Out of Frame Seconds. Count of seconds during which a de-encap (Tx) OOF defect was present." ::= { sdhClientCtpPmRealEntry 9 } sdhClientCtpPmRealCktId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Circuit ID(s) of the connection created on the SDH termination point." ::= { sdhClientCtpPmRealEntry 10 } sdhClientCtpPmRealLinePRBSSyncErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Line PRBS monitoring is enabled." ::= { sdhClientCtpPmRealEntry 11 } sdhClientCtpPmRealLinePRBSErr OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incremented only when Line PRBS monitoring is enabled." ::= { sdhClientCtpPmRealEntry 12 } sdhClientCtpPmRealTribPRBSSyncErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Trib PRBS monitoring is enabled." ::= { sdhClientCtpPmRealEntry 13 } sdhClientCtpPmRealTribPRBSErr OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incre mented only when Trib PRBS monitoring is enabled." ::= { sdhClientCtpPmRealEntry 14 } sdhClientCtpPmRealRxUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section - Unavailable seconds." ::= { sdhClientCtpPmRealEntry 15 } sdhClientCtpPmRealTxUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Un available seconds." ::= { sdhClientCtpPmRealEntry 16 } sdhClientCtpPmRealRxBER OBJECT-TYPE SYNTAX FloatArbitraryPrecision MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Bit Error Rate.." ::= { sdhClientCtpPmRealEntry 17 } sdhClientCtpPmRealTxBER OBJECT-TYPE SYNTAX FloatArbitraryPrecision MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Bit Error Rate." ::= { sdhClientCtpPmRealEntry 18 } -- Conformance Statements sdhClientCtpPmConformance OBJECT IDENTIFIER ::= { sdhClientCtpPmMIB 3 } sdhClientCtpPmCompliances OBJECT IDENTIFIER ::= { sdhClientCtpPmConformance 1 } sdhClientCtpPmGroups OBJECT IDENTIFIER ::= { sdhClientCtpPmConformance 2 } sdhClientCtpPmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the PM-SDHCLIENTCTP-MIB" MODULE MANDATORY-GROUPS { sdhClientCtpPmGroup } ::= { sdhClientCtpPmCompliances 1 } sdhClientCtpPmRealCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the sdhClientCtpPmReal-MIB" MODULE MANDATORY-GROUPS { sdhClientCtpPmRealGroup } ::= { sdhClientCtpPmCompliances 2 } sdhClientCtpPmGroup OBJECT-GROUP OBJECTS { sdhClientCtpPmValidity, sdhClientCtpPmRxBE, sdhClientCtpPmRxES, sdhClientCtpPmRxSES, sdhClientCtpPmRxOFS, sdhClientCtpPmRxLOSS, sdhClientCtpPmTxBE, sdhClientCtpPmTxES, sdhClientCtpPmTxSES, sdhClientCtpPmTxOFS, sdhClientCtpPmCktId, sdhClientCtpPmTribPRBSSyncErr, sdhClientCtpPmTribPRBSErr, sdhClientCtpPmPayloadType, sdhClientCtpPmRxUAS, sdhClientCtpPmTxUAS, sdhClientCtpPmLinePRBSSyncErr, sdhClientCtpPmLinePRBSErr } STATUS current DESCRIPTION " A collection of objects for reading the performance of the sdhClientCtp." ::= { sdhClientCtpPmGroups 1 } sdhClientCtpPmRealGroup OBJECT-GROUP OBJECTS { sdhClientCtpPmRealRxBE, sdhClientCtpPmRealRxES, sdhClientCtpPmRealRxSES, sdhClientCtpPmRealRxOFS, sdhClientCtpPmRealRxLOSS, sdhClientCtpPmRealTxBE, sdhClientCtpPmRealTxES, sdhClientCtpPmRealTxSES, sdhClientCtpPmRealTxOFS, sdhClientCtpPmRealCktId, sdhClientCtpPmRealLinePRBSSyncErr, sdhClientCtpPmRealLinePRBSErr, sdhClientCtpPmRealTribPRBSSyncErr, sdhClientCtpPmRealTribPRBSErr, sdhClientCtpPmRxUAS, sdhClientCtpPmTxUAS, sdhClientCtpPmRealRxBER, sdhClientCtpPmRealTxBER } STATUS current DESCRIPTION " A collection of objects for reading the real-time performance of the sdhClientCtp." ::= { sdhClientCtpPmGroups 2 } END