-- *************************************************************** -- INFINERA-ENTITY-ORM-MIB -- -- October 2008, Sharfuddin Syed / Narendra Gupta -- -- -- Copyright (c) 2008-2012 by Infinera Inc. -- All rights reserved. -- **************************************************************** INFINERA-ENTITY-ORM-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, TruthValue, DisplayString FROM SNMPv2-TC entPhysicalIndex FROM ENTITY-MIB equipment FROM INFINERA-REG-MIB InfnFiberType, FloatHundredths, FloatTenths, InfnEnableDisable, InfnEqptType FROM INFINERA-TC-MIB; ormMIB MODULE-IDENTITY LAST-UPDATED "200810200000Z" ORGANIZATION "Infinera" CONTACT-INFO "Infinera 1322 Bordeaux Drive Sunnyvale, CA - 94089 Contact : Technical Support Email : support@infinera.com Phone : 1-877-INF-5288" DESCRIPTION " " ::= { equipment 16 } -- Conformance Statements ormConformance OBJECT IDENTIFIER ::= { ormMIB 3 } ormCompliances OBJECT IDENTIFIER ::= { ormConformance 1 } ormGroups OBJECT IDENTIFIER ::= { ormConformance 2 } -- January 28, 2008 -- January 28, 2008 ormTable OBJECT-TYPE SYNTAX SEQUENCE OF OrmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ORM entries. Each entry is uniquely identified by the value of entPhysicalIndex." ::= { ormMIB 1 } ormEntry OBJECT-TYPE SYNTAX OrmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A ORM entry containing information pertaining to Infinera ORM modules. Entries will exist in this table for entPhysicalEntries of type ORM." INDEX { entPhysicalIndex } ::= { ormTable 1 } OrmEntry ::= SEQUENCE { ormMoId DisplayString, ormProvisonedType InfnEqptType, ormRxAmpDeviceSetpoint FloatTenths, ormRxAmpDeviceTarget FloatTenths, ormRxLastAmpDeviceCommitTs Integer32, ormLaunchPowerOffset FloatTenths, ormRxDampSeqNum Integer32, ormTilt FloatTenths, ormPointLossOffset FloatTenths, ormEnhPMRept InfnEnableDisable, ormRowStatus RowStatus, ormCBandSoakCapableFW TruthValue, ormAsePowerBetaCoeffX FloatHundredths, ormAsePowerBetaCoeffY FloatHundredths, ormAsePowerBetaCoeffZ FloatHundredths, ormPumpPowerBetaCoeffX FloatHundredths, ormPumpPowerBetaCoeffY FloatHundredths, ormPumpPowerBetaCoeffZ FloatHundredths, ormPumpRatioPump1 FloatHundredths, ormPumpRatioPump2 FloatHundredths, ormPumpRatioPump3 FloatHundredths, ormPumpRatioPump4 FloatHundredths, ormStaticRamanGain FloatHundredths, ormStaticEdfaGain FloatHundredths, ormStaticPostEdfaVoaAttenuation FloatHundredths, ormFiberType InfnFiberType } ormMoId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The object identifire." ::= { ormEntry 1 } ormProvisonedType OBJECT-TYPE SYNTAX InfnEqptType MAX-ACCESS read-create STATUS current DESCRIPTION "The configured ORM type." ::= { ormEntry 2 } ormRxAmpDeviceSetpoint OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-only STATUS current DESCRIPTION "Current gain value for DAMP" ::= { ormEntry 3 } ormRxAmpDeviceTarget OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-only STATUS current DESCRIPTION "Target gain value for DAMP." ::= { ormEntry 4 } ormRxLastAmpDeviceCommitTs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last gain adjusted time by DAMP protocol." ::= { ormEntry 5 } ormLaunchPowerOffset OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-create STATUS current DESCRIPTION "The launch power will be adjusted by this value." ::= { ormEntry 6 } ormRxDampSeqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current DAMP sequence number." ::= { ormEntry 7 } ormTilt OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is an offset to the gain tilt of the BMM/OAM/ORM - without any offset applied (offset of 0dB), the gain tilt of the BMM/OAM is 1dB." ::= { ormEntry 8 } ormPointLossOffset OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-create STATUS current DESCRIPTION "The ORM Point Loss Offset configuration is used to accommodate the point-losses such as connector losses and patch cable losses" ::= { ormEntry 9 } ormEnhPMRept OBJECT-TYPE SYNTAX InfnEnableDisable MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is for enabling and disabling of enhanced PM" ::= { ormEntry 10 } ormRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " The row status of this ORM entry Because rows in this table are indexed by entPhysicalIndex, to create a new row one must choose a value of entPhysicalIndex that is not already in use. A side-effect of the creation of a row in this table is the creation of a corresponding row in the eqptTable and the entPhysicalTable. The status may not be set to active if the ormMoId, ormProvEqptType and other read-create objects are not set to valid values. This row may only be deleted if it was a pre-provisioned row and the hardware is not present. If this row is deleted, the associated row in the Eqpt Table and entPhysicalTable will be deleted by the agent." ::= { ormEntry 11 } ormCBandSoakCapableFW OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ormEntry 12 } ormAsePowerBetaCoeffX OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 13 } ormAsePowerBetaCoeffY OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 14 } ormAsePowerBetaCoeffZ OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 15 } ormPumpPowerBetaCoeffX OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 16 } ormPumpPowerBetaCoeffY OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 17 } ormPumpPowerBetaCoeffZ OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 18 } ormPumpRatioPump1 OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 19 } ormPumpRatioPump2 OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 20 } ormPumpRatioPump3 OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 21 } ormPumpRatioPump4 OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 22 } ormStaticRamanGain OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 23 } ormStaticEdfaGain OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 24 } ormStaticPostEdfaVoaAttenuation OBJECT-TYPE SYNTAX FloatHundredths MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 25 } ormFiberType OBJECT-TYPE SYNTAX InfnFiberType MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ormEntry 26 } ormCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the ORM-MIB" MODULE MANDATORY-GROUPS { ormGroup } ::= { ormCompliances 1 } ormGroup OBJECT-GROUP OBJECTS { ormMoId, ormProvisonedType, ormRxAmpDeviceSetpoint, ormRxAmpDeviceTarget, ormRxLastAmpDeviceCommitTs, ormLaunchPowerOffset, ormRxDampSeqNum, ormTilt, ormPointLossOffset, ormEnhPMRept, ormRowStatus, ormCBandSoakCapableFW, ormAsePowerBetaCoeffX, ormAsePowerBetaCoeffY, ormAsePowerBetaCoeffZ, ormPumpPowerBetaCoeffX, ormPumpPowerBetaCoeffY, ormPumpPowerBetaCoeffZ, ormPumpRatioPump1, ormPumpRatioPump2, ormPumpRatioPump3, ormPumpRatioPump4, ormStaticRamanGain, ormStaticEdfaGain, ormStaticPostEdfaVoaAttenuation, ormFiberType } STATUS current DESCRIPTION " A collection of objects for managing a ORM module" ::= { ormGroups 1 } END