-- *************************************************************** -- INFINERA-ENTITY-BMM-MIB -- -- October 2008, Sharfuddin Syed / Narendra Gupta -- -- -- Copyright (c) 2008-2012 by Infinera Inc. -- All rights reserved. -- **************************************************************** INFINERA-ENTITY-BMM-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, TruthValue, DisplayString FROM SNMPv2-TC entPhysicalIndex FROM ENTITY-MIB equipment FROM INFINERA-REG-MIB FloatTenths, InfnEqptType,InfnMaxChRatePlan FROM INFINERA-TC-MIB; bmmMIB MODULE-IDENTITY LAST-UPDATED "200810200000Z" ORGANIZATION "Infinera" CONTACT-INFO "Infinera 1322 Bordeaux Drive Sunnyvale, CA - 94089 Contact : Technical Support Email : support@infinera.com Phone : 1-877-INF-5288" DESCRIPTION " " ::= { equipment 3 } -- Conformance Statements bmmConformance OBJECT IDENTIFIER ::= { bmmMIB 3 } bmmCompliances OBJECT IDENTIFIER ::= { bmmConformance 1 } bmmGroups OBJECT IDENTIFIER ::= { bmmConformance 2 } -- January 28, 2008 -- January 28, 2008 bmmTable OBJECT-TYPE SYNTAX SEQUENCE OF BmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of BMM entries. Each entry is uniquely identified by the value of entPhysicalIndex." ::= { bmmMIB 1 } bmmEntry OBJECT-TYPE SYNTAX BmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A BMM entry containing information pertaining to Infinera BMM modules. Entries will exist in this table for entPhysicalEntries of type BMM." INDEX { entPhysicalIndex } ::= { bmmTable 1 } BmmEntry ::= SEQUENCE { bmmMoId DisplayString, bmmProvisonedType InfnEqptType, bmmRxAmpDeviceSetpoint FloatTenths, bmmRxAmpDeviceTarget FloatTenths, bmmRxLastAmpDeviceCommitTs Integer32, bmmDisableGainControlLoop TruthValue, bmmLaunchPowerOffset FloatTenths, bmmNumberOfChannel Integer32, bmmTxDampSeqNum Integer32, bmmRxDampSeqNum Integer32, bmmTilt FloatTenths, bmmOperatingMode INTEGER, bmmGain FloatTenths, bmmRowStatus RowStatus, bmmMaxChanRatePlan InfnMaxChRatePlan, bmmCBandSoakCapableFW TruthValue, bmmSuccessfulACGRunTime Integer32 } bmmMoId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This should be specified in the format of x-A-y. where x is the chassis MoId and y is the slot in which BMM is present for example 1-A-1, 2-A-1 etc." ::= { bmmEntry 1 } bmmProvisonedType OBJECT-TYPE SYNTAX InfnEqptType MAX-ACCESS read-create STATUS current DESCRIPTION "The configured circuit pack type." DEFVAL { 47 } ::= { bmmEntry 2 } bmmRxAmpDeviceSetpoint OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-only STATUS current DESCRIPTION "Current gain value for DAMP." ::= { bmmEntry 3 } bmmRxAmpDeviceTarget OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-only STATUS current DESCRIPTION "Target gain value for DAMP." ::= { bmmEntry 4 } bmmRxLastAmpDeviceCommitTs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last gain adjusted time by DAMP protocol." ::= { bmmEntry 5 } bmmDisableGainControlLoop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Disable Gain Control Loop" DEFVAL { false } ::= { bmmEntry 6 } bmmLaunchPowerOffset OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-create STATUS current DESCRIPTION "The BMM launch power will be adjusted by this value. The range of valid values is -2dB/channel to +2dB/channel." ::= { bmmEntry 7 } bmmNumberOfChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Number of active channels in OTS. The values can be 160, 80, 40 and 20." ::= { bmmEntry 8 } bmmTxDampSeqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Tx DAMP sequence number." ::= { bmmEntry 9 } bmmRxDampSeqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Rx DAMP sequence number." ::= { bmmEntry 10 } bmmTilt OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is an offset to the gain tilt of the BMM/OAM/ORM - without any offset applied (offset of 0dB), the gain tilt of the BMM/OAM is 1dB." ::= { bmmEntry 11 } bmmOperatingMode OBJECT-TYPE SYNTAX INTEGER { nativeAutomated (1), slteMode1 (2), thirdPartyAmp (3), static (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The BMM in mode at which is is operating." ::= { bmmEntry 12 } bmmGain OBJECT-TYPE SYNTAX FloatTenths MAX-ACCESS read-create STATUS current DESCRIPTION "If configured mode is slteMode1 then user can input the required gain for rx EDFA." ::= { bmmEntry 13 } bmmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this BMM entry. Because rows in this table are indexed by entPhysicalIndex, to create a new row one must choose a value of entPhysicalIndex that is not already in use. A side-effect of the creation of a row in this table is the creation of a corresponding row in the eqptTable and the entPhysicalTable. The status may not be set to active if the bmmMoId, bmmProvEqptType, bmmDisableGainControlLoop, bmmLaunchPowerOffset, or bmmNumberOfChannel objects are not set to valid values. This row may only be deleted if it was a pre-provisioned row and the hardware is not present. If this row is deleted, the associated row in the Eqpt Table and entPhysicalTable will be deleted by the agent." ::= { bmmEntry 14 } bmmMaxChanRatePlan OBJECT-TYPE SYNTAX InfnMaxChRatePlan MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Channel Rate Plan " ::= { bmmEntry 15 } bmmCBandSoakCapableFW OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { bmmEntry 16} bmmSuccessfulACGRunTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { bmmEntry 17 } bmmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the BMM-MIB" MODULE MANDATORY-GROUPS { bmmGroup } ::= { bmmCompliances 1 } bmmGroup OBJECT-GROUP OBJECTS { bmmMoId, bmmProvisonedType, bmmRxAmpDeviceSetpoint, bmmRxAmpDeviceTarget, bmmRxLastAmpDeviceCommitTs, bmmDisableGainControlLoop, bmmLaunchPowerOffset, bmmNumberOfChannel, bmmTxDampSeqNum, bmmRxDampSeqNum, bmmTilt, bmmOperatingMode, bmmGain, bmmRowStatus , bmmMaxChanRatePlan, bmmCBandSoakCapableFW, bmmSuccessfulACGRunTime } STATUS current DESCRIPTION " A collection of objects for managing a BMM module" ::= { bmmGroups 1 } END