HM2-NETCONFIG-MIB DEFINITIONS ::= BEGIN -- -- ************************************************************* -- Hirschmann Network Configuration MIB -- ************************************************************* -- IMPORTS NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString, MacAddress FROM SNMPv2-TC TimeFilter FROM RMON2-MIB InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB ifIndex, InterfaceIndex FROM IF-MIB hm2ConfigurationMibs, HmEnabledStatus FROM HM2-TC-MIB; hm2NetConfigMib MODULE-IDENTITY LAST-UPDATED "201103160000Z" -- March 16, 2011 ORGANIZATION "Hirschmann Automation and Control GmbH" CONTACT-INFO "Postal: Stuttgarter Str. 45-51 72654 Neckartenzlingen Germany Phone: +49 7127 140 E-mail: hac.support@belden.com" DESCRIPTION "Hirschmann Network Configuration MIB. Copyright (C) 2012. All Rights Reserved." REVISION "201103160000Z" -- March 16, 2011 DESCRIPTION "Initial version." ::= { hm2ConfigurationMibs 20 } -- -- ************************************************************* -- hm2NetConfigMib -- ************************************************************* -- hm2NetConfigMibNotifications OBJECT IDENTIFIER ::= { hm2NetConfigMib 0 } hm2NetConfigMibObjects OBJECT IDENTIFIER ::= { hm2NetConfigMib 1 } -- hm2NetConfigMibConformance OBJECT IDENTIFIER ::= { hm2NetConfigMib 2 } -- -- ************************************************************* -- hm2NetConfigMib groups -- ************************************************************* -- hm2NetStaticGroup OBJECT IDENTIFIER ::= { hm2NetConfigMibObjects 1 } hm2NetACDGroup OBJECT IDENTIFIER ::= { hm2NetConfigMibObjects 2 } hm2NetMacGroup OBJECT IDENTIFIER ::= { hm2NetConfigMibObjects 3 } hm2NetHiDiscoveryGroup OBJECT IDENTIFIER ::= { hm2NetConfigMibObjects 4 } hm2NetMacACDGroup OBJECT IDENTIFIER ::= { hm2NetConfigMibObjects 5 } hm2NetOobMgmtGroup OBJECT IDENTIFIER ::= { hm2NetConfigMibObjects 6 } -- -- ************************************************************* -- hm2NetStaticGroup -- ************************************************************* -- hm2NetConfigProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), bootp(2), dhcp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The switch's network configuration protocol. The default value is dependent of the device type." DEFVAL { dhcp } ::= { hm2NetStaticGroup 1 } hm2NetLocalIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Local IP address type." DEFVAL { ipv4 } ::= { hm2NetStaticGroup 2 } hm2NetLocalIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the management agent board. Changing this value will take effect after activating with hm2NetAction." DEFVAL { '00000000'H } ::= { hm2NetStaticGroup 3 } hm2NetPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-write STATUS current DESCRIPTION "The length of the IP netmask." DEFVAL { 0 } ::= { hm2NetStaticGroup 4 } hm2NetGatewayIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Default gateway IP address type." DEFVAL { ipv4 } ::= { hm2NetStaticGroup 5 } hm2NetGatewayIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the default gateway. Changing this value will take effect after activating with hm2NetAction." DEFVAL { '00000000'H } ::= { hm2NetStaticGroup 6 } hm2NetVlanID OBJECT-TYPE SYNTAX Integer32 (1..4042) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN-ID of the IP protocol stack. The VLAN-ID value means that only traffic of the appropriate VLAN is accepted and outgoing traffic uses this VLAN-ID." DEFVAL { 1 } ::= { hm2NetStaticGroup 7 } hm2NetVlanPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN Priority which is used in management replies." DEFVAL { 0 } ::= { hm2NetStaticGroup 8 } hm2NetIpDscpPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "IP DSCP value which is used in management replies." DEFVAL { 0 } ::= { hm2NetStaticGroup 9 } hm2NetMgmtPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The port number of the Ethernet port, which gets the access to the switch management. If the value is set to 0, the access to the switch management is permitted from all ports of the switch. This object is only applicable for embedded switches which are integrated into customer devices." DEFVAL { 0 } ::= { hm2NetStaticGroup 10 } hm2NetDHCPClientId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier string that is currently used by the client in the request packets to the server for obtaining lease information." ::= { hm2NetStaticGroup 11 } hm2NetAction OBJECT-TYPE SYNTAX INTEGER { other (1), activate (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack with the current values of hm2NetLocalIPAddr, hm2NetGatewayIPAddr and hm2NetMask." DEFVAL { other } ::= { hm2NetStaticGroup 50 } -- -- ************************************************************* -- hm2NetACDGroup -- ************************************************************* -- hm2NetACDStatus OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the status of the ip address conflict detection mechanism on this device. With activating the ACD status an internal check of duplicated IP-addresses is enabled." DEFVAL { enable } ::= { hm2NetACDGroup 1 } hm2NetACDDetectionMode OBJECT-TYPE SYNTAX INTEGER { activeAndPassive(1), activeDetectionOnly(2), passiveDetectionOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the mode of the ip address conflict detection mechanism on this device. activeAndPassive (1): Both active and passive detection are active. activeDetectionOnly (2): During configuration of a local ip address the device actively probes the network for this ip address. passiveDetectionOnly (3): The device listens passively on the network if another device with an already locally configured ip address appears. In this case the own ip address is actively defended by transmitting gratituous ARP's." DEFVAL { activeAndPassive } ::= { hm2NetACDGroup 2 } hm2NetACDOngoingProbeStatus OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the device sends periodic ARP or NDP probes every 90-120 seconds." DEFVAL { enable } ::= { hm2NetACDGroup 3 } hm2NetACDDelay OBJECT-TYPE SYNTAX Integer32 (20..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Time gap between ARP or NDP probes being sent." DEFVAL { 200 } ::= { hm2NetACDGroup 5 } hm2NetACDReleaseDelay OBJECT-TYPE SYNTAX Integer32 (3..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in seconds to the next ARP or NDP probe cycle after an ip address conflict was detected." DEFVAL { 15 } ::= { hm2NetACDGroup 7 } hm2NetACDMaxProtection OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of ARP announcement packets (gratuitous ARP packets) in passive(ongoing) mode to be received within hm2NetACDProtectInterval until the agent detects this as a conflict." DEFVAL { 1 } ::= { hm2NetACDGroup 9 } hm2NetACDProtectInterval OBJECT-TYPE SYNTAX Integer32 (20..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in milliseconds between two protections. See also hm2NetACDMaxProtection." DEFVAL { 10000 } ::= { hm2NetACDGroup 11 } hm2NetACDFaultState OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "true(1) if an active address conflict is detected. false(2) if no present address conflict." ::= { hm2NetACDGroup 13 } hm2NetACDTrapEnable OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled this trap reports an address conflict." DEFVAL { enable } ::= { hm2NetACDGroup 15 } -- ACD address conflict table hm2NetACDAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2NetACDAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains address conflict detection information on the local system known to this agent." ::= { hm2NetACDGroup 20 } hm2NetACDAddrEntry OBJECT-TYPE SYNTAX Hm2NetACDAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address conflict detection information about a particular address on the local system known to this agent. There may be multiple addresses configured on the system. Entries may be created and deleted in this table by the agent." INDEX { hm2NetACDTimeMark } ::= { hm2NetACDAddrTable 1 } Hm2NetACDAddrEntry ::= SEQUENCE { hm2NetACDTimeMark TimeFilter, hm2NetACDAddrType InetAddressType, hm2NetACDIPAddr InetAddress, hm2NetACDMAC MacAddress, hm2NetACDifIndex InterfaceIndex } hm2NetACDTimeMark OBJECT-TYPE SYNTAX TimeFilter MAX-ACCESS read-only STATUS current DESCRIPTION "A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works." REFERENCE "IETF RFC 2021 section 6" ::= { hm2NetACDAddrEntry 1 } hm2NetACDAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Local IP Address Type" ::= { hm2NetACDAddrEntry 3 } hm2NetACDIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address used to identify the management address component associated with the local system." ::= { hm2NetACDAddrEntry 5 } hm2NetACDMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The physical address of the device that was detected causing the ip address conflict." ::= { hm2NetACDAddrEntry 7 } hm2NetACDifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index on the local system where the ip address conflict was detected." ::= { hm2NetACDAddrEntry 9 } -- -- ************************************************************* -- hm2NetMacGroup -- ************************************************************* -- hm2NetLocalBurnedInMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Physical base address (MAC address) of the agent. This is the burned in MAC address from the production" ::= { hm2NetMacGroup 1 } hm2NetLocalAdminMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The switch's network locally administered MAC address. This is the locally MAC address from the administrator. If the hm2NetLocalAdminMacAddress is nonzero, the device starts with this MAC address at the next boot. If the variable is changed, they must be stored by the configuration manager. A MAC address with a set multicast bit will not be accepted" DEFVAL { '000000000000'h } ::= { hm2NetMacGroup 2 } hm2NetMacAddressType OBJECT-TYPE SYNTAX INTEGER { burned-in(1), local(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the currently used MAC address at boot time. The device starts with the burned in MAC address when hm2NetLocalAdminMacAddress is zero, otherwise with the Local-Admin-MAC-Address." ::= { hm2NetMacGroup 3 } -- -- ************************************************************* -- hm2NetHiDiscoveryGroup -- ************************************************************* -- hm2NetHiDiscoveryOperation OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables the HiDiscovery protocol on this device. This protocol allows a remote host to detect devices without an IP configuration. It also allows the host to set IP parameters, like the ip address, the netmask and the gateway address." DEFVAL { enable } ::= { hm2NetHiDiscoveryGroup 1 } hm2NetHiDiscoveryMode OBJECT-TYPE SYNTAX INTEGER { readWrite(1), readOnly(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In the read only mode only detecting and reading the IP parameters is permitted. The read write mode gives full access to the device." DEFVAL { readWrite } ::= { hm2NetHiDiscoveryGroup 2 } hm2NetHiDiscoveryBlinking OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables the HiDiscovery blinking sequence on this device. This object will not be saved." DEFVAL { disable } ::= { hm2NetHiDiscoveryGroup 3 } hm2NetHiDiscoveryProtocol OBJECT-TYPE SYNTAX BITS { none(0), v1(1), v2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the HiDiscovery protocols supported by the device." ::= { hm2NetHiDiscoveryGroup 4 } hm2NetHiDiscoveryRelay OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Relay/bridge HiDiscovery frames." DEFVAL { enable } ::= { hm2NetHiDiscoveryGroup 5 } -- -- ************************************************************* -- hm2NetMacACDGroup -- ************************************************************* -- hm2NetMacACDStatus OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the status of the MAC address conflict detection mechanism on this device." DEFVAL { disable } ::= { hm2NetMacACDGroup 1 } hm2NetMacACDConflictAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address in case of a conflict." ::= { hm2NetMacACDGroup 2 } -- -- *********************************************************** -- hm2NetConfigMibNotifications -- *********************************************************** hm2NetACDNotification NOTIFICATION-TYPE OBJECTS { hm2NetACDTimeMark, hm2NetACDAddrType, hm2NetACDIPAddr, hm2NetACDMAC, hm2NetACDifIndex } STATUS current DESCRIPTION "This trap reports an address conflict." ::= { hm2NetConfigMibNotifications 1 } hm2NetMacACDNotification NOTIFICATION-TYPE OBJECTS { ifIndex, hm2NetMacACDConflictAddress } STATUS current DESCRIPTION "This trap reports a MAC address conflict with it's own MAC address." ::= { hm2NetConfigMibNotifications 2 } -- -- ************************************************************* -- hm2NetOobMgmtGroup -- ************************************************************* -- hm2NetOobMgmtAdminState OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the Out-of-band management on this device." DEFVAL { enable } ::= { hm2NetOobMgmtGroup 1 } hm2NetOobMgmtProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), bootp(2), dhcp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The switch's out-of-band network configuration protocol. The default value is dependent of the device type." DEFVAL { none } ::= { hm2NetOobMgmtGroup 2 } hm2NetOobMgmtIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Out-of-band IP address type." DEFVAL { ipv4 } ::= { hm2NetOobMgmtGroup 3 } hm2NetOobMgmtIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Out-of-band IP address of the management agent board. Changing this value will take effect after activating with hm2NetOobMgmtAction." DEFVAL { '00000000'H } ::= { hm2NetOobMgmtGroup 4 } hm2NetOobMgmtPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-write STATUS current DESCRIPTION "The length of the IP netmask." DEFVAL { 0 } ::= { hm2NetOobMgmtGroup 5 } hm2NetOobMgmtGatewayIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Out-of-band default gateway IP address type." DEFVAL { ipv4 } ::= { hm2NetOobMgmtGroup 6 } hm2NetOobMgmtGatewayIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Out-of-band IP address of the default gateway. Changing this value will take effect after activating with hm2NetOobMgmtAction." DEFVAL { '00000000'H } ::= { hm2NetOobMgmtGroup 7 } hm2NetOobMgmtMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Out-of-band MAC address of the interface." ::= { hm2NetOobMgmtGroup 8 } hm2NetOobMgmtOperState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Out-of-band interface current operational state." ::= { hm2NetOobMgmtGroup 9 } hm2NetOobMgmtAction OBJECT-TYPE SYNTAX INTEGER { other (1), activate (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the out-of-band IP protocol stack with the current values of hm2NetOobMgmtLocalIPAddr, hm2NetOobMgmtPrefixLength and hm2NetOobMgmtGatewayIPAddr." DEFVAL { other } ::= { hm2NetOobMgmtGroup 50 } END