-- **************************************************************************** -- -- This module provides authoritative definitions for Dell Networking OS -- Virtual Link Trunk Mib. -- -- **************************************************************************** -- F10-VIRTUAL-LINK-TRUNK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, MacAddress, TimeInterval FROM SNMPv2-TC InterfaceIndex FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB f10Mgmt FROM FORCE10-SMI; -- **************************************************************************** -- * MODULE IDENTITY -- **************************************************************************** f10VirtualLinkTrunkMib MODULE-IDENTITY LAST-UPDATED "201211280000Z" ORGANIZATION "Dell Inc" CONTACT-INFO "http://www.force10networks.com/support" DESCRIPTION "This MIB module provides information on Dual Brain Virtual Link Trunk(VLT) feature which is a control plane mechanism to provide Layer2 multipathing between access network devices (switches or servers) and the core network. VLT represents a single logical layer 2 domain from the view of downstream devices that have LAG bundles terminating on separate chassis in the virtual link trunk domain. However, the two VLT chassis are independent L2/L3 switches for devices in the upstream network. A sample of VLT scenario: --------------------------------------------------------------- | _______________ | | | Edge router | | | |_______________| | | / \ | | / \ | | VLT / \ | | ____________/_______________________\____________ . | | | _______/ Back Up Link \_______ | /|\| | | | |-------------------------| | | | | | | | | ------- | | | L3| | | | | S4810 |________| Inter |________| S4810 | |_____| | | | |________|Chassis|________| | | L2| | | | | | | Link | | | | | | | VLT port \_____\ ------- /____/VLT port\|/| | |_____\_____\_________________________/____/_____| . | | \ \ -----------------/ / | | \ \----/------------ / | | \ / \ / | | \ / \ / | |Lag(active)<--- \ / \ /--->Lag(active) | | ___\__/___________________\_/______ | | | _______ Stacking ______ | | | | | S60 |--------------| S60 | | | | | |__\____| |____/_| | | | |_____\______________________/______| | | \ /-->Nic teaming | | \__________________/ | | | Nic1 Nic2 | | | | Server | | | |____________________| | --------------------------------------------------------------- Benefits of VLT are as follows: > Allows a single device to use LAG across two upstream devices > Eliminates Spanning Tree Protocol (STP) blocked ports > Provides a loop-free topology > Uses all available uplink bandwidth > Provides fast convergence if either the link or a device fails > Provides link-level resiliency > Assures high availability GLOSSARY AND ABBREVIATIONS VLT - Virtual Link Trunk The combined port channel between the VLT peer devices and the downstream device. VLT Peer device One of a pair of devices that are connected with the special port channel known as the chassis interconnect trunk. VLT Chassis Interconnect Trunk The link used to synchronize states between the VLT peer devices. VLT domain This domain includes both VLT peer devices, the VLT chassis interconnect trunk, and all of the port channels in the VLT connected to the downstream devices. VLT Backup link The backup link monitors the vitality of a VLT peer device. The backup trunk sends configurable, periodic heart beat messages between VLT peer devices. ICL Abbreviation for Chassis InterConnect Link." REVISION "201211280000Z" -- Nov 29, 2012 DESCRIPTION " - Added new objects f10VLTPeerRouting, f10VLTPeerRoutingTimeout,f10VLTRemotePeerRouting in f10VirtualLinkTrunkTable - Added additional error reason peerRoutMismatch in f10VltErrorReason object" REVISION "201205210000Z" -- May 21, 2012 DESCRIPTION "Added new object f10VLTCfgSysMacAddr in f10VirtualLinkTrunkTable" REVISION "201205140000Z" -- May 14, 2012 DESCRIPTION "Re arranged MIB objects in the f10VirtualLinkTrunkTable to make it compatible with older version. Moved the newly added objects at the bottom" REVISION "201204020000Z" -- April 2, 2012 DESCRIPTION "Re arrenged the f10VirtualLinkTrunkTable, additional objects are added. - f10VirtualLinkTrunkNotifications added to make notifications separate subtree from f10VirtualLinkTrunkMib. - f10VirtualLinkDetailsTable is added for VLT details. - f10VLTIclBwUsageExceed, f10VLTDomainConfigError new notifications are added. - Updated the corresponding conformance groups - Some indentation change" REVISION "201105060000Z" -- May 6, 2011 DESCRIPTION "Modified MIB OID from 13 to 16." REVISION "201103140000Z" -- March 14, 2011 DESCRIPTION "Initial draft of VLT MIB." ::= { f10Mgmt 17 } f10VirtualLinkTrunkObjects OBJECT IDENTIFIER ::={ f10VirtualLinkTrunkMib 1 } f10VirtualLinkTrunkNotifObjects OBJECT IDENTIFIER ::={ f10VirtualLinkTrunkMib 2 } -- For Notifications -- Textual Conventions F10VLTMemberLinkStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This defines the status of the link. The states are: linkNotEstablished - Initial State. linkUp - Link is established and the VLT operations specific to this link are up. linkDown - Communication with Peer is lost. linkError - Configuration incompatible." SYNTAX INTEGER { linkNotEstablished(0), linkUp(1), linkDown(2), linkError(3) } -- **************************************************************************** -- Virtual Link Trunk Table -- **************************************************************************** f10VirtualLinkTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF F10VirtualLinkTrunkTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the information about Virtual Link Trunks. A row is added to the table when a VLT domain is configured in the device. A row is deleted from the table when the configured VLT domain is removed." ::= {f10VirtualLinkTrunkObjects 1 } f10VirtualLinkTrunkTableEntry OBJECT-TYPE SYNTAX F10VirtualLinkTrunkTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents information about the specific VLT domain." INDEX { f10VLTDomainId } ::= { f10VirtualLinkTrunkTable 1 } F10VirtualLinkTrunkTableEntry ::= SEQUENCE { f10VLTDomainId Unsigned32, f10VLTMacAddr MacAddress, f10VLTPriority Unsigned32, f10VLTIclIfIndex InterfaceIndex, f10VLTRole INTEGER, f10VLTPeerStatus INTEGER, f10VLTIclStatus F10VLTMemberLinkStatus, f10VLTHBeatStatus F10VLTMemberLinkStatus, f10VLTBkUpIpAddrType InetAddressType, f10VLTBkUpIpAddr InetAddress, f10VLTBkUpInterval TimeInterval, f10VLTRemoteMacAddr MacAddress, f10VLTRemoteRolePriority Unsigned32, f10VLTUnitId Unsigned32, f10VLTVersionMajor Unsigned32, f10VLTVersionMinor Unsigned32, f10VLTRemoteUnitId Unsigned32, f10VLTRemoteVersionMajor Unsigned32, f10VLTRemoteVersionMinor Unsigned32, f10VLTIclBwStatus INTEGER, f10VLTCfgSysMacAddr MacAddress, f10VLTPeerRouting INTEGER, f10VLTPeerRoutingTimeout TimeInterval, f10VLTRemotePeerRouting INTEGER } f10VLTDomainId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This oject represents the Virtual Link Trunk Domain's id." ::= { f10VirtualLinkTrunkTableEntry 1 } f10VLTMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the MAC Address value assigned to this Virtual Link Trunk domain." ::= { f10VirtualLinkTrunkTableEntry 2 } f10VLTPriority OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Virtual Link Trunk domain's System Priority value." DEFVAL { 32768 } ::= { f10VirtualLinkTrunkTableEntry 3 } f10VLTIclIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the interface index of the link configured as the Inter Chassis Link for the Virtual Link Trunk domain." ::= { f10VirtualLinkTrunkTableEntry 4 } f10VLTRole OBJECT-TYPE SYNTAX INTEGER { standAlone(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the role of the device in the Virtual Link Trunk domain configured." ::= { f10VirtualLinkTrunkTableEntry 5 } f10VLTPeerStatus OBJECT-TYPE SYNTAX INTEGER { notEstablished(0), peerUp(1), peerDown(2), linkDown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the status of the VLT Peer i.e whether it is active, or in disabled/errored state. notEstablished - set if ICL Link is either in notEstablished status or error status. peerUp - set if ICL Link is up. peerDown - set if both ICL link and Backup link are down linkDown - set if ICL link down and Backup link is up. " ::= { f10VirtualLinkTrunkTableEntry 6 } f10VLTIclStatus OBJECT-TYPE SYNTAX F10VLTMemberLinkStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of the IC link aggregation. linkNotEstablished - ICL Hello has not yet started.Initial State. linkUp - Hello protocol is established and the VLT operations are up. linkDown - Communication with Peer is lost. linkError - Communication with Peer is established but configuration incompatible." ::= { f10VirtualLinkTrunkTableEntry 7 } f10VLTHBeatStatus OBJECT-TYPE SYNTAX F10VLTMemberLinkStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the status of the heart beat link/backup link. linkNotEstablished - Heartbeat has not yet started. Initial stage. linkUp - Heartbeat started and Remote is Up. linkDown - Heartbeat lost. linkError - This indicates a configuration error." ::= { f10VirtualLinkTrunkTableEntry 8 } f10VLTBkUpIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the address family of the Backup link designated for the Virtual Link Trunk Domain." ::= { f10VirtualLinkTrunkTableEntry 9 } f10VLTBkUpIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Ip address of the backup link." ::= { f10VirtualLinkTrunkTableEntry 10 } f10VLTBkUpInterval OBJECT-TYPE SYNTAX TimeInterval(100..500) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the time interval for the VLT heart-beat timer. " DEFVAL { 100 } ::= { f10VirtualLinkTrunkTableEntry 11 } f10VLTRemoteMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the MAC Address of the Remote system that is part of the VLT Domain." ::= { f10VirtualLinkTrunkTableEntry 12 } f10VLTRemoteRolePriority OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the role priority of the Remote System that is part of the Virtual Link Trunk Domain." DEFVAL { 32768 } ::= { f10VirtualLinkTrunkTableEntry 13 } f10VLTUnitId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the configured unit ID for the Virtual Link Trunk domain." ::= { f10VirtualLinkTrunkTableEntry 14 } f10VLTVersionMajor OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the major version of for the Virtual Link Trunk domain protocol running." ::= { f10VirtualLinkTrunkTableEntry 15 } f10VLTVersionMinor OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the minor version of for the Virtual Link Trunk domain protocol running." ::= { f10VirtualLinkTrunkTableEntry 16 } f10VLTRemoteUnitId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the configured unit ID for the Virtual Link Trunk domain on the remote node." ::= { f10VirtualLinkTrunkTableEntry 17 } f10VLTRemoteVersionMajor OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the major version of for the Virtual Link Trunk domain protocol running on the remote node." ::= { f10VirtualLinkTrunkTableEntry 18 } f10VLTRemoteVersionMinor OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the minor version of for the Virtual Link Trunk domain protocol running on the remote node." ::= { f10VirtualLinkTrunkTableEntry 19 } f10VLTIclBwStatus OBJECT-TYPE SYNTAX INTEGER { belowthreshold(0), abovethreshold(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the status of the VLT ICL Bandwidth usage i.e whether it crosses threshold, or below threshold state. below-threshold - set if ICL Link BW usage is below 80% above-threshold - set if ICL link BW usage is above 80%. " ::= { f10VirtualLinkTrunkTableEntry 20 } f10VLTCfgSysMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the System MAC Address value configured the Virtual Link Trunk domain." ::= { f10VirtualLinkTrunkTableEntry 21 } f10VLTPeerRouting OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of the VLT Peer routing i.e whether it is enabled or disabled." ::= { f10VirtualLinkTrunkTableEntry 22 } f10VLTPeerRoutingTimeout OBJECT-TYPE SYNTAX TimeInterval(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the time interval for VLT peer-routing timer, which is configured for removing the local-da of the other peer in case of peer failure." ::= { f10VirtualLinkTrunkTableEntry 23 } f10VLTRemotePeerRouting OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of the VLT Peer routing configured on the remote peer node i.e whether it is enabled or disabled." ::= { f10VirtualLinkTrunkTableEntry 24 } -- **************************************************************************** -- Virtual Link Statistics Table -- **************************************************************************** f10VirtualLinkStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F10VirtualLinkStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the details of the statistical information on traffic traversing port channels to attached devices, Interchassis link, and backup link." ::= { f10VirtualLinkTrunkObjects 2 } f10VirtualLinkStatsTableEntry OBJECT-TYPE SYNTAX F10VirtualLinkStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is the device specific statistical information on traffic in the links in VLT domain." AUGMENTS { f10VirtualLinkTrunkTableEntry } ::= { f10VirtualLinkStatsTable 1 } F10VirtualLinkStatsTableEntry ::= SEQUENCE{ f10VLTStatNumHelloSent Counter32, f10VLTStatNumHelloRcvd Counter32, f10VLTStatNumHbeatSent Counter32, f10VLTStatNumHbeatRcvd Counter32, f10VLTStatNumDomainErrors Counter32, f10VLTStatNumVersionErrors Counter32 } f10VLTStatNumHelloSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of Hello Packets sent across the ICL for synchronization." ::= { f10VirtualLinkStatsTableEntry 1 } f10VLTStatNumHelloRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of Hello Packets received from the remote VLT through the ICL." ::= { f10VirtualLinkStatsTableEntry 2 } f10VLTStatNumHbeatSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of periodic Keepalive messages sent by the VLT device to the peer." ::= { f10VirtualLinkStatsTableEntry 3 } f10VLTStatNumHbeatRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of periodic Keepalive messages received by the VLT device from the peer." ::= { f10VirtualLinkStatsTableEntry 4 } f10VLTStatNumDomainErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of hello/heartbeat packets dropped by the VLT device which failed to match the device's VLT domain Id." ::= { f10VirtualLinkStatsTableEntry 5 } f10VLTStatNumVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of hello/heartbeat packets dropped by the VLT device which failed to match the device's VLT message's version." ::= { f10VirtualLinkStatsTableEntry 6 } -- **************************************************************************** -- Virtual Link Trunk Details Table -- **************************************************************************** f10VirtualLinkDetailsTable OBJECT-TYPE SYNTAX SEQUENCE OF F10VirtualLinkDetailsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the details of port channel information by traversing port channels to attached devices, peer port-channel ID, status and Active Vlans" ::= { f10VirtualLinkTrunkObjects 3 } f10VirtualLinkDetailsTableEntry OBJECT-TYPE SYNTAX F10VirtualLinkDetailsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is the port channel specific information on links between TOR and VLT domain." INDEX { f10VLTDetailLocalLagID } ::= { f10VirtualLinkDetailsTable 1 } F10VirtualLinkDetailsTableEntry ::= SEQUENCE{ f10VLTDetailLocalLagID Unsigned32, f10VLTDetailPeerLagID Unsigned32, f10VLTDetailLocalStatus INTEGER, f10VLTDetailPeerStatus INTEGER } f10VLTDetailLocalLagID OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Detail of the vlt local lag ID." ::= { f10VirtualLinkDetailsTableEntry 1 } f10VLTDetailPeerLagID OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Detail of the vlt peer lag ID" ::= { f10VirtualLinkDetailsTableEntry 2 } f10VLTDetailLocalStatus OBJECT-TYPE SYNTAX INTEGER { down(0), up(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface operational status of the vlt local LAG ID" ::= { f10VirtualLinkDetailsTableEntry 3 } f10VLTDetailPeerStatus OBJECT-TYPE SYNTAX INTEGER { down(0), up(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface operational status of the vlt peer LAG ID." ::= { f10VirtualLinkDetailsTableEntry 4 } -- This object is for f10VLTDomainConfigError Trap/Notification f10VLTErrorReason OBJECT-TYPE SYNTAX INTEGER { noError(1), domainIdMismatch(2), unitIdMismatch(3), versionMismatch(4), sysMacMismatch(5), peerRoutingMismatch(6) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents the VLT domain config error,the possible errors are: noError - No Error. domainIdMismatch - local and remote vlt domain Id mismatch. unitIdMismatch - local or remote vlt Unit Id is Identical or not configured. versionMismatch - local and remote vlt version does not meet criteria for peer UP. sysMacMismatch - local and remote vlt system MAC mismatch. peerRoutingMismatch - local and remote vlt peer-routing config mismatch" ::= { f10VirtualLinkTrunkObjects 4} -- **************************************************************************** -- * Virtual link Trunk Alarms and Notifications -- **************************************************************************** f10VirtualLinkTrunkNotifications OBJECT IDENTIFIER ::={ f10VirtualLinkTrunkNotifObjects 0 } -- For Notifications f10VLTRoleChange NOTIFICATION-TYPE OBJECTS { f10VLTRole } STATUS current DESCRIPTION "The agent generates this norification to denote the change in role of the VLT device in the VLT domain. This notification carries the information about the new role. The possible roles are as follows: 1. StandAlone 2. Primary 3. Secondary" ::= { f10VirtualLinkTrunkNotifications 1 } f10VLTIclStatusChange NOTIFICATION-TYPE OBJECTS { f10VLTIclStatus } STATUS current DESCRIPTION "The agent generates this notification to denote the change in InterConnect Link Status.The notification contains information on the new ICL status. The possible states are as follows: 1. NotEstabished 2. LinkUp 3. LinkDown 4. LinkError" ::= { f10VirtualLinkTrunkNotifications 2 } f10VLTPeerStatusChange NOTIFICATION-TYPE OBJECTS { f10VLTPeerStatus } STATUS current DESCRIPTION "The agent generates this notification to denote the change in Status of the Peer in the VLT domain. This notification contains information on the new status of the peer device. The possible states are as follows: 1. NotEstablished 2. PeerUp 3. PeerDown 4. LinkDown" ::= { f10VirtualLinkTrunkNotifications 3 } f10VLTHBeatStatusChange NOTIFICATION-TYPE OBJECTS { f10VLTHBeatStatus } STATUS current DESCRIPTION "The agent generates this notification to denote the change in Backup Link Status. The notification contains information on the new BackupLink Status. The possible states are as follows: 1. NotEstabished 2. LinkUp 3. LinkDown 4. LinkError" ::= { f10VirtualLinkTrunkNotifications 4 } f10VLTIclBwUsageExceed NOTIFICATION-TYPE OBJECTS { f10VLTIclIfIndex, f10VLTIclBwStatus } STATUS current DESCRIPTION "The IFM agent generates this notification to denote the change in Bandwidth usage of ICL Link, when it crosses the threshold above 80 %. The possible states are as follows: 0. Below threshold 1. Above threshold" ::= { f10VirtualLinkTrunkNotifications 5 } f10VLTDomainConfigError NOTIFICATION-TYPE OBJECTS { f10VLTErrorReason } STATUS current DESCRIPTION "The agent generates this notification to denote there is a error/conflict in the VLT domain config parameters (either locally or in remote node which prevent the peer up. The mismatch can be domain Id, unitId,version or system MAC. The notification contains information on the error/mismatch type." ::= { f10VirtualLinkTrunkNotifications 6 } -- **************************************************************************** -- Conformance Information -- **************************************************************************** f10VirtualLinkTrunkConformance OBJECT IDENTIFIER ::= { f10VirtualLinkTrunkMib 3 } f10VirtualLinkTrunkCompliances OBJECT IDENTIFIER ::= { f10VirtualLinkTrunkConformance 1 } f10VirtualLinkTrunkGroups OBJECT IDENTIFIER ::= { f10VirtualLinkTrunkConformance 2 } -- **************************************************************************** -- * Compliance Statements -- **************************************************************************** f10VirtualLinkTrunkCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Dell Networking OS Virtual Link Trunk MIB." MODULE MANDATORY-GROUPS { f10VirtualLinkTrunkGroup, f10VirtualLinkStatisticsGroup, f10VirtualLinkNotificationGroup, f10VirtualLinkDetailsTableGroup } ::= { f10VirtualLinkTrunkCompliances 1} -- **************************************************************************** -- Units of Conformance -- **************************************************************************** f10VirtualLinkTrunkGroup OBJECT-GROUP OBJECTS { f10VLTDomainId, f10VLTMacAddr, f10VLTPriority, f10VLTIclIfIndex, f10VLTRole, f10VLTPeerStatus, f10VLTIclStatus, f10VLTHBeatStatus, f10VLTBkUpIpAddrType, f10VLTBkUpIpAddr, f10VLTBkUpInterval, f10VLTRemoteMacAddr, f10VLTRemoteRolePriority, f10VLTUnitId, f10VLTVersionMajor, f10VLTVersionMinor, f10VLTRemoteUnitId, f10VLTRemoteVersionMajor, f10VLTRemoteVersionMinor, f10VLTIclBwStatus, f10VLTCfgSysMacAddr, f10VLTPeerRouting, f10VLTPeerRoutingTimeout, f10VLTRemotePeerRouting, f10VLTErrorReason --No Separate group added for this object. } STATUS current DESCRIPTION "This group represents a collection of objects providing the overall VLT information." ::= { f10VirtualLinkTrunkGroups 1 } f10VirtualLinkStatisticsGroup OBJECT-GROUP OBJECTS { f10VLTStatNumHelloSent, f10VLTStatNumHelloRcvd, f10VLTStatNumHbeatSent, f10VLTStatNumHbeatRcvd, f10VLTStatNumDomainErrors, f10VLTStatNumVersionErrors } STATUS current DESCRIPTION "This group represents a collection of objects providing the overall statistical information on the VLT." ::= { f10VirtualLinkTrunkGroups 2 } f10VirtualLinkNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { f10VLTRoleChange, f10VLTIclStatusChange, f10VLTPeerStatusChange, f10VLTHBeatStatusChange, f10VLTIclBwUsageExceed, f10VLTDomainConfigError } STATUS current DESCRIPTION "A collection of notification objects for the Dell Networking OS VLT mib" ::= { f10VirtualLinkTrunkGroups 3 } f10VirtualLinkDetailsTableGroup OBJECT-GROUP OBJECTS { f10VLTDetailLocalLagID, f10VLTDetailPeerLagID, f10VLTDetailLocalStatus, f10VLTDetailPeerStatus } STATUS current DESCRIPTION "This group represents a collection of objects providing the LAG details on the VLT." ::= { f10VirtualLinkTrunkGroups 4 } -- **************************************************************************** -- End of Units of conformance -- **************************************************************************** END