-- Eltek OEM MIB for Nextel Digital Power plant designs

ELTEK_GENERIC-MIB DEFINITIONS ::= BEGIN

IMPORTS
	NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY, 
	mib-2, enterprises, Integer32
		FROM SNMPv2-SMI
	NOTIFICATION-GROUP
		FROM SNMPv2-CONF
	DisplayString
		FROM SNMPv2-TC
	eltek
		FROM ELTEK-COMMON-MIB;


-- Aeongold	branch will be 1
-- AL175		branch will be 2
-- AL6000		branch will be 3
-- Webpower proto	branch will be 4
-- ENEXUS		branch will be 5
-- Nextel Smartpack	branch will be 6
-- ELTEK Common     branch will be 7

eltekPlant           OBJECT IDENTIFIER ::= { eltek 7 }

-- This branch contains OIDs for configuration of the Smartpack Control System's
-- basic data and settings

controlSystem        OBJECT IDENTIFIER ::= { eltekPlant 1 }
systemTime           OBJECT IDENTIFIER ::= { controlSystem 1 }

-- This branch contains OIDs for configuration of the DC Power System's
-- basic factory data and user's installation settings

dcSystem             OBJECT IDENTIFIER ::= { eltekPlant 2 }
dcPlant              OBJECT IDENTIFIER ::= { dcSystem 1 }

-- This branch contains OIDs for configuration of the DC Power System's
-- installation and location settings

systemSiteInfo       OBJECT IDENTIFIER ::= { dcPlant 3 }

-- This branch contains OIDs for configuration of the DC Power System's
-- Battery charging and protection related settings

battery              OBJECT IDENTIFIER ::= { eltekPlant 3 }

-- This branch contains OIDs for configuration of the DC Power System's
-- Battery Disconnect Contactor  / Emergency Disconnect related settings

batteryLVD           OBJECT IDENTIFIER ::= { battery 17 }

-- This branch contains OIDs for configuration of the DC Power System's
-- Battery Symmetry Monitor related settings

batteryMidpoint      OBJECT IDENTIFIER ::= { battery 18 }

-- This branch contains OIDs related to the DC Load Distribution equipment

loadDistribution     OBJECT IDENTIFIER ::= { eltekPlant 4 }

-- This branch contains OIDs related to the Load Disconnect / Load Shedding equipment

loadDistributionLVDStatus  OBJECT IDENTIFIER ::= { loadDistribution 3 }

-- This branch contains OIDs related to the Flatpack 2 rectifier parameters

rectifier            OBJECT IDENTIFIER ::= { eltekPlant 5 }

-- This branch contains OIDs for polling of the Flatpack 2 Rectifier status settings

rectifierStatus      OBJECT IDENTIFIER ::= { rectifier 5 }
acDistribution       OBJECT IDENTIFIER ::= { eltekPlant 6 }

-- This branch contains Alarms and Events that are mappable to alarm relay positions.
-- Also duplicated as Traps

alarmGroup           OBJECT IDENTIFIER ::= { eltekPlant 7 }

-- Common alarm types: (12) as specified by Nextel as relay outputs,
-- others available for inclusion to Plant summation alarms

alarmWellknownAlarms  OBJECT IDENTIFIER ::= { alarmGroup 1 }

systemTimeTime  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..255))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system date and time. Used for event timestamps and logging"
	::= { systemTime 1 }

systemInfoRefresh  OBJECT-TYPE
	SYNTAX     INTEGER {
		pushbutton (0),
		refreshdata (1)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"This object will re-initialize the agent, updating MIB data values."
	::= { controlSystem 2 }

systemTrapRepeatRate  OBJECT-TYPE
	SYNTAX     Integer32 (0..10)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"This object sets the repeat rate of any active traps, in seconds.
		Entering 0 (zero) will prevent repeating traps - one trap only will be sent per alarm event."
	::= { controlSystem 3 }

systemSendOffTrap  OBJECT-TYPE
	SYNTAX     INTEGER {
		off (0),
		on (1)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"A separate off-trap will be issued when an alarm condition goes off, if this flag is set to 1.
		Entering 0 (zero) will prevent OFF traps from being transmitted."
	::= { controlSystem 4 }

systemSiteInfoCustomer  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..32))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The Customer name (as stored in the Smartpack Control Unit)"
	::= { systemSiteInfo 1 }

systemSiteInfoLocation  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..32))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system/site Location details (as stored in the Smartpack Control Unit)."
	::= { systemSiteInfo 2 }

systemSiteInfoMessage1  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..32))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system/site Info Message record #1 (as stored in the Smartpack Control Unit). 31 Bytes."
	::= { systemSiteInfo 3 }

systemSiteInfoMessage2  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..32))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system/site Info Message record #2 (as stored in the Smartpack Control Unit). 31 Bytes."
	::= { systemSiteInfo 4 }

systemSiteInfoInstalledDate  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system's Installed Date text string (as stored in the Smartpack Control Unit) 16bytes."
	::= { systemSiteInfo 5 }

systemSiteInfoControllerType  OBJECT-TYPE
	SYNTAX     INTEGER {
		al175 (0),
		al4000 (1),
		al6000 (2),
		enexus (3)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system Controller Module currently connected.
		 AL175/MCU=0; AEON Gold=1; AL6000=2; Smartpack=3"
	::= { systemSiteInfo 6 }

systemSiteInfoSystemSeriaNum  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The serial number for the complete system"
	::= { systemSiteInfo 7 }

systemSiteInfoControllerSeriaNum  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The serial number for the system controller"
	::= { systemSiteInfo 8 }

systemNominalVoltage  OBJECT-TYPE
	SYNTAX     INTEGER {
		prs48v (0),
		prs24v (1),
		prs12v (2),
		prs26v (3),
		prs60v (4)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The nominal voltage rating. 12V/24V/48V/60V systems
		 0=48V
		 1=24V
		 2=12V
		 3=26V
		 4=60V"
	::= { dcPlant 4 }

systemOperationalStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		floatvoltreg (0),
		floattempcomp (1),
		batteryboost (2),
		batterytest (3)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"A summary status showing if the system is testing, boosting, floating etc.
		 0=Float, voltage regulated
		 1=Float, temperature comp. regulated;
		 2=equalize
		 3=battery test"
	::= { dcSystem 2 }

batteryName  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"A descriptive name of the battery installed in the system"
	::= { battery 1 }

batteryVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7500)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The measured battery voltage."
	::= { battery 2 }

batteryCurrent  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"Amperes; i.e. 20 = 20 Amperes"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The measured battery current."
	::= { battery 3 }

batteryTemp  OBJECT-TYPE
	SYNTAX     Integer32 (0..9999)
	UNITS 	"1/10 Deg. C; i.e. 250 = 25.0 Deg. C."
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The battery temperature "
	::= { battery 4 }

batteryBreakerStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		closed (0),
		open (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The state of the battery fuse/breaker can be either closed(0) or open(1) "
	::= { battery 5 }

batteryChargeCurrentLimitCtrl  OBJECT-TYPE
	SYNTAX     INTEGER {
		deactivate (0),
		activate (1)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Control field for the battery charge limitation feature; 0=inactive, 1=active."
	::= { battery 6 }

batteryChargeCurrentLimitValue  OBJECT-TYPE
	SYNTAX     Integer32 (0..2100)
	UNITS 	"Amperes; i.e. 20 = 20 Amperes"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Battery charging current limit value"
	::= { battery 7 }

batteryTempCompEnable  OBJECT-TYPE
	SYNTAX     INTEGER {
		disable (0),
		enable (1)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable (0) or Disable (1) Battery Temperature Compensated output regulation mode"
	::= { battery 8 }

batteryFloatVoltConfig  OBJECT-TYPE
	SYNTAX     Integer32 (4300..6000)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The Voltage at which the DC System float charges."
	::= { battery 9 }

batteryEqualizeVoltConfig  OBJECT-TYPE
	SYNTAX     Integer32 (4300..6000)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The Voltage at which the DC System boost charges the batteries."
	::= { battery 10 }

batteryHighMajorAlarmVoltageConfig  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The High Battery Voltage alarm limit set voltage"
	::= { battery 11 }

batteryHighMinorAlarmVoltageConfig  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The High Battery Voltage alarm limit set voltage"
	::= { battery 12 }

batteryLowMajorAlarmVoltageConfig  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The Low Battery Voltage Alarm limit set voltage"
	::= { battery 13 }

-- This alarm may be used to warn of impending Low Voltage Battery Disconnect operation

batteryLowMinorAlarmVoltageConfig  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The Very Low Battery Voltage Alarm limit set voltage"
	::= { battery 14 }

batteryStartManualTest  OBJECT-TYPE
	SYNTAX     INTEGER {
		pushbutton (0),
		starttest (1),
		stoptest (2)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"This pushbutton will start a manual battery test if otherwise the system allows it."
	::= { battery 15 }

batteryStartManualBoost  OBJECT-TYPE
	SYNTAX     INTEGER {
		pushbutton (0),
		startboost (1),
		stopboost (2)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"This pushbutton will start a manual battery boost if otherwise the system allows it."
	::= { battery 16 }

batteryLVDStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		connect (0),
		disconnect (1),
		disable (2)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Contactor is closed(0) or open(1) "
	::= { batteryLVD 1 }

batteryLVDDisconnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The Contactor Disconnect Voltage"
	::= { batteryLVD 2 }

batteryLVDConnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The Contactor Reconnect Voltage"
	::= { batteryLVD 3 }

-- This setpoint / value is common for all battery strings monitored

batteryMidpointDeltaLimitVoltage  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"1/100 Volt; i.e. 25 = 2.50V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The allowable deviation of the midpoint battery voltage from the theoretical.
		 Exceeding this value in either direction (+/-) causes an alarm state"
	::= { batteryMidpoint 1 }

batteryMidpointIndex  OBJECT-TYPE
	SYNTAX     Integer32 (1..8)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"An index of Battery Strings, for the batteryMidpointControlTable
		 and batteryMidpointStatusTable arrays "
	::= { batteryMidpoint 2 }

batteryMidpointControlTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF BatteryMidpointControlEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A table of settings related to Battery Symmetry (midpoint) Monitoring"
	::= { batteryMidpoint 3 }

batteryMidpointControlEntry  OBJECT-TYPE
	SYNTAX 	BatteryMidpointControlEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"Settings related to Battery Symmetry (midpoint) Monitoring, corresponding
		 to the batteryMidpointIndex value"
	INDEX { batteryMidpointIndex }
	::= { batteryMidpointControlTable 1 }

BatteryMidpointControlEntry ::= SEQUENCE {
	midpointEnableID
		Integer32,
	midpointEnable
		INTEGER
}

midpointEnableID  OBJECT-TYPE
	SYNTAX     Integer32 (1..8)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier ID number of the rectifier record."
	::= { batteryMidpointControlEntry 1 }

midpointEnable  OBJECT-TYPE
	SYNTAX     INTEGER {
		disable (0),
		enable (1)
	}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable (1) or Disable (0) the Battery Monitor channel which corresponds
		 to the batteryMidpointIndex value"
	::= { batteryMidpointControlEntry 2 }

batteryMidpointStatusTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF BatteryMidpointStatusEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A table of values and/or measurements related to Battery Symmetry (midpoint) Monitoring"
	::= { batteryMidpoint 4 }

batteryMidpointStatusEntry  OBJECT-TYPE
	SYNTAX 	BatteryMidpointStatusEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"Values related to Battery Symmetry (midpoint) Monitoring, corresponding
		 to the batteryMidpointIndex value"
	INDEX { batteryMidpointIndex }
	::= { batteryMidpointStatusTable 1 }

BatteryMidpointStatusEntry ::= SEQUENCE {
	midpointStatusID
		Integer32,
	midpointStatus
		INTEGER,
	midpointDeltaVoltage
		Integer32
}

midpointStatusID  OBJECT-TYPE
	SYNTAX     Integer32 (1..8)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier ID number of the rectifier record."
	::= { batteryMidpointStatusEntry 1 }

midpointStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		ok (0),
		alarm (1),
		disable (2)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Status (0=Normal; 1=Alarm) of the Battery Monitor channel which corresponds 
		 to the batteryMidpointIndex value"
	::= { batteryMidpointStatusEntry 2 }

midpointDeltaVoltage  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"1/100 Volt; i.e. 25 = 2.5V."
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The measured battery voltage deviation from midpoint of the Battery Monitor channel
		 which corresponds to the batteryMidpointIndex value."
	::= { batteryMidpointStatusEntry 3 }

loadDistributionCurrent  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"Amperes; i.e. 20 = 20 Amperes"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The total load current"
	::= { loadDistribution 1 }

loadDistributionBreakerStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		closed (0),
		open (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The state of the load fuse/breaker can be either closed(0) or open(1) "
	::= { loadDistribution 2 }

loadLVD1EnableStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		disabled (0),
		enabled (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The status of contactors configuration. 'enabled' means that the contactor is i n use. 'disabled' means that the contactor is disconfigured and not in use."
	::= { loadDistributionLVDStatus 1 }

loadLVD1Status  OBJECT-TYPE
	SYNTAX     INTEGER {
		connect (0),
		disconnect (1),
		disable (2)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The A Bus (primary loads) Contactor is closed(0) or open(1) "
	::= { loadDistributionLVDStatus 2 }

loadLVD1ConnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The A Bus (primary loads) Contactor Connect Voltage"
	::= { loadDistributionLVDStatus 3 }

loadLVD1DisconnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The A Bus (primary loads) Contactor Disconnect Voltage"
	::= { loadDistributionLVDStatus 4 }

loadLVD2EnableStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		disabled (0),
		enabled (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The status of contactors configuration. 'enabled' means that the contactor is i n use. 
		'disabled' means that the contactor is disconfigured and not in use."
	::= { loadDistributionLVDStatus 5 }

loadLVD2Status  OBJECT-TYPE
	SYNTAX     INTEGER {
		connect (0),
		disconnect (1),
		disable (2)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The B Bus (secondary loads) Contactor is closed(0) or open(1) "
	::= { loadDistributionLVDStatus 6 }

loadLVD2ConnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The B Bus (secondary loads) Contactor Connect Voltage"
	::= { loadDistributionLVDStatus 7 }

loadLVD2DisconnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The B Bus (secondary loads) Contactor Disconnect Voltage"
	::= { loadDistributionLVDStatus 8 }

loadLVD3EnableStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		disabled (0),
		enabled (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The status of contactors configuration. 'enabled' means that the contactor is i n use. 
		'disabled' means that the contactor is disconfigured and not in use."
	::= { loadDistributionLVDStatus 9 }

loadLVD3Status  OBJECT-TYPE
	SYNTAX     INTEGER {
		connect (0),
		disconnect (1),
		disable (2)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The C Bus (critical loads) Contactor is closed(0) or open(1) "
	::= { loadDistributionLVDStatus 10 }

loadLVD3ConnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The C Bus (critical loads) Contactor Connect Voltage"
	::= { loadDistributionLVDStatus 11 }

loadLVD3DisconnectVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..7200)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The C Bus (critical loads) Contactor Disconnect Voltage"
	::= { loadDistributionLVDStatus 12 }

rectifierInstalledRectifiers  OBJECT-TYPE
	SYNTAX     Integer32 (1..101)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The installed number of rectifiers for this DC Power System."
	::= { rectifier 1 }

rectifierRectifiersActive  OBJECT-TYPE
	SYNTAX     Integer32 (1..101)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The actual number of active rectifiers in this DC Power System."
	::= { rectifier 2 }

rectifierTotalCurrent  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"Amperes; i.e. 20 = 20 Amperes"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The DC system's total available current"
	::= { rectifier 3 }

rectifierUtilization  OBJECT-TYPE
	SYNTAX     Integer32 (0..100)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Utilization in % of available rectifier capacity"
	::= { rectifier 4 }

rectifierStatusNoIndex  OBJECT-TYPE
	SYNTAX     Integer32 (1..20)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"A starting index for the rectifierStatusTable array"
	DEFVAL  { 1 }
	::= { rectifierStatus 1 }

rectifierStatusTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF RectifierStatusEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A table listing up to sixteen sequential recifiers, starting
		from the rectifier number specified by rectifierStatusNoIndex"
	::= { rectifierStatus 2 }

rectifierStatusEntry  OBJECT-TYPE
	SYNTAX 	RectifierStatusEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A row of rectifier status data corresponding to the rectifierStatusNoIndex value"
	INDEX { rectifierStatusID }
	::= { rectifierStatusTable 1 }

RectifierStatusEntry ::= SEQUENCE {
	rectifierStatusID
		Integer32,
	rectifierStatusStatus
		INTEGER,
	rectifierStatusOutputCurrent
		Integer32,
	rectifierStatusOutputVoltage
		Integer32,
	rectifierStatusTemp
		Integer32,
	rectifierStatusType
		DisplayString,
	rectifierStatusSKU
		DisplayString,
	rectifierStatusSerialNo
		DisplayString,
	rectifierStatusRevisionLevel
		DisplayString
}

rectifierStatusID  OBJECT-TYPE
	SYNTAX     Integer32 (1..100)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier ID number of the rectifier record."
	::= { rectifierStatusEntry 1 }

rectifierStatusStatus  OBJECT-TYPE
	SYNTAX     INTEGER {
		absent (0),
		active (1),
		failed (2),
		walkin (3),
		disabledbycommand (4)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The operational status of the rectifier record.
		absent (0),
		active (1),
		failed (2),
		walkin (3),
		disabledbycommand (4)
		
		"
	::= { rectifierStatusEntry 2 }

rectifierStatusOutputCurrent  OBJECT-TYPE
	SYNTAX     Integer32 (0..65535)
	UNITS 	"1/10 Amperes; i.e. 200 = 20 Amperes"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier current of the rectifier record."
	::= { rectifierStatusEntry 3 }

rectifierStatusOutputVoltage  OBJECT-TYPE
	SYNTAX     Integer32 (0..65535)
	UNITS 	"1/100 Volt; i.e. 5400 = 54.00V"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier voltage of the rectifier record."
	::= { rectifierStatusEntry 4 }

rectifierStatusTemp  OBJECT-TYPE
	SYNTAX     Integer32 (0..65535)
	UNITS 	"Deg. C/10; i.e. 350 = 35.0 Deg. C"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The heatsink temperature of the rectifier record."
	::= { rectifierStatusEntry 5 }

rectifierStatusType  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier article number string of the rectifier record."
	::= { rectifierStatusEntry 6 }

rectifierStatusSKU  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier Stock Keeping Unit number or other user-defined ID of the rectifier record."
	::= { rectifierStatusEntry 7 }

rectifierStatusSerialNo  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier serial number string of the rectifier record."
	::= { rectifierStatusEntry 8 }

rectifierStatusRevisionLevel  OBJECT-TYPE
	SYNTAX     DisplayString (SIZE(0..16))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The rectifier version number string of the rectifier record."
	::= { rectifierStatusEntry 9 }

acVoltage1  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"Volts AC"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The AC Voltage of phase 1"
	::= { acDistribution 1 }

acVoltage2  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"Volts AC"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The AC Voltage of phase 2"
	::= { acDistribution 2 }

acVoltage3  OBJECT-TYPE
	SYNTAX     Integer32
	UNITS 	"Volts AC"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The AC Voltage of phase 3"
	::= { acDistribution 3 }

alarmMajorHighBattVolt OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The Very High Battery Voltage Alarm"
	::= { alarmWellknownAlarms 1 }

alarmMinorHighBattVolt OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The High Battery Voltage alarm"
	::= { alarmWellknownAlarms 2 }

alarmMajorLowBattVolt OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The Very Low Battery Voltage Alarm"
	::= { alarmWellknownAlarms 3 }

alarmMinorLowBattVolt OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The Low Battery Voltage Alarm"
	::= { alarmWellknownAlarms 4 }

alarmMajorBatteryHighTemp OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Temperature much too high alarm, or  temperature compensation circuit / probe failure alarm"
	::= { alarmWellknownAlarms 5 }

alarmMinorBatteryHighTemp OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Temperature much too high alarm"
	::= { alarmWellknownAlarms 6 }

alarmBatteryDisconnectOpen OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The Battery Disconnect Contactor alarm"
	::= { alarmWellknownAlarms 7 }

alarmLVD1open OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The A Bus (primary loads) Contactor alarm. The contactor dropout voltage has been
		 reached and the contactor will release."
	::= { alarmWellknownAlarms 8 }

alarmLVD2open OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The B Bus (secondary loads) Contactor alarm. The contactor dropout voltage has been
		 reached and the contactor will release."
	::= { alarmWellknownAlarms 9 }

alarmLVD3open OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The C Bus (critical loads) Contactor alarm. The contactor dropout voltage has been
		 reached and the contactor will release.
		"
	::= { alarmWellknownAlarms 10 }

alarmACmains OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The AC voltage has dropped below critical level, 
		or one or more AC input phases was lost."
	::= { alarmWellknownAlarms 11 }

alarmBatteryBreakerOpen OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Battery string disconnect breaker/fuse alarm"
	::= { alarmWellknownAlarms 12 }

alarmDistributionBreakerOpen OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The Load Distribution breaker/fuse alarm "
	::= { alarmWellknownAlarms 13 }

alarmMajorRectifier OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"This is a 'multiple rectifiers have failed' alarm"
	::= { alarmWellknownAlarms 14 }

alarmMinorRectifier OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"This is a 'one rectifier has failed' alarm"
	::= { alarmWellknownAlarms 15 }

alarmMajorBatteryMidpoint OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Battery Symmetry (midpoint) Delta Voltage is badly out of limits alarm"
	::= { alarmWellknownAlarms 16 }

alarmMinorBatteryMidpoint OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Battery Symmetry (midpoint) Delta Voltage out of limits alarm"
	::= { alarmWellknownAlarms 17 }

alarmBatteryLifeEnded OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The battery capacity has dropped below critical level. 
		A battery test has measured the fully charged capacity to be too low, 
		and thus probably the battery lifecycle to be near expired."
	::= { alarmWellknownAlarms 18 }

alarmBatteryTestmodeEntered OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system has lowered the battery charge voltage in order to discharge the batteries 
		to a predefinend level. When the criteria for stopping the battery testing is reached, the 
		charge voltage is increased to commence normal charging."
	::= { alarmWellknownAlarms 19 }

alarmBatteryBoostmodeEntered OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The system has increased the battery charge voltage in order to equalize the 
		battery cells charging. When the criteria for stopping the battery equalizing is reached, 
		the charge voltage is lowered to commence normal charging."
	::= { alarmWellknownAlarms 20 }

alarmUserConfigurable1 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 21 }

alarmUserConfigurable2 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 22 }

alarmUserConfigurable3 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 23 }

alarmUserConfigurable4 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 24 }

alarmUserConfigurable5 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 25 }

alarmUserConfigurable6 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 26 }

alarmUserConfigurable7 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 27 }

alarmUserConfigurable8 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 28 }

alarmUserConfigurable9 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 29 }

alarmUserConfigurable10 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 30 }

alarmUserConfigurable11 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 31 }

alarmUserConfigurable12 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 32 }

alarmUserConfigurable13 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 33 }

alarmUserConfigurable14 OBJECT-TYPE
	SYNTAX     INTEGER {
		normal (0),
		alarm (1)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps that explains the purpose of the alarm. "
	::= { alarmWellknownAlarms 34 }

dcSystemTraps  NOTIFICATION-GROUP
	NOTIFICATIONS { alarmMajorHighBattVoltTrap, 
		alarmMinorHighBattVoltTrap, 
		alarmMajorLowBattVoltTrap, 
		alarmMinorLowBattVoltTrap, 
		alarmMajorBatteryHighTempTrap, 
		alarmMinorBatteryHighTempTrap, 
		alarmBatteryDisconnectOpenTrap, 
		alarmLVD1openTrap, 
		alarmLVD2openTrap, 
		alarmLVD3openTrap, 
		alarmACmainsTrap, 
		alarmBatteryBreakerOpenTrap, 
		alarmDistributionBreakerOpenTrap, 
		alarmMajorRectifierTrap, 
		alarmMinorRectifierTrap, 
		alarmMajorBatteryMidpointTrap, 
		alarmMinorBatteryMidpointTrap, 
		alarmBatteryLifeEndedTrap, 
		alarmBatteryTestmodeEnteredTrap, 
		alarmBatteryBoostmodeEnteredTrap,
		alarmUserConfigurable1Trap, 
		alarmUserConfigurable2Trap, 
		alarmUserConfigurable3Trap, 
		alarmUserConfigurable4Trap, 
		alarmUserConfigurable5Trap, 
		alarmUserConfigurable6Trap, 
		alarmUserConfigurable7Trap, 
		alarmUserConfigurable8Trap, 
		alarmUserConfigurable9Trap, 
		alarmUserConfigurable10Trap, 
		alarmUserConfigurable11Trap, 
		alarmUserConfigurable12Trap, 
		alarmUserConfigurable13Trap, 
		alarmUserConfigurable14Trap }
	STATUS     current
	DESCRIPTION 
		" This branch contains the Alarm Notification Traps, which duplicate the alarmGroup OIDs.
		 Each alarm condition is represented by a Alarm Condition Trap and an associated OFF
		 Trap, which is optionally transmitted according to the state of  OID systemSendOffTrap"
	::= { eltekPlant 8 }





alarmMajorHighBattVoltTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMajorHighBattVolt}
	STATUS     current
	DESCRIPTION 
		"The Very High Battery Voltage alarm"
	::= { dcSystemTraps 1 }

alarmMinorHighBattVoltTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMinorHighBattVolt}
	STATUS     current
	DESCRIPTION 
		"The High Battery Voltage alarm"
	::= { dcSystemTraps 2 }

alarmMajorLowBattVoltTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMajorLowBattVolt}
	STATUS     current
	DESCRIPTION 
		"The Very Low Battery Voltage Alarm"
	::= { dcSystemTraps 3 }

alarmMinorLowBattVoltTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMinorLowBattVolt}
	STATUS     current
	DESCRIPTION 
		"The Low Battery Voltage Alarm"
	::= { dcSystemTraps 4 }

alarmMajorBatteryHighTempTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMajorBatteryHighTemp}
	STATUS     current
	DESCRIPTION 
		"High Battery temperature alarm or 
		Temperature Compensation circuit / probe failure alarm"
	::= { dcSystemTraps 5 }

alarmMinorBatteryHighTempTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMinorBatteryHighTemp}
	STATUS     current
	DESCRIPTION 
		"High Battery temperature alarm"
	::= { dcSystemTraps 6 }

alarmBatteryDisconnectOpenTrap  NOTIFICATION-TYPE
	OBJECTS { alarmBatteryDisconnectOpen}
	STATUS     current
	DESCRIPTION 
		"The Battery Disconnect Contactor alarm"
	::= { dcSystemTraps 7 }

alarmLVD1openTrap  NOTIFICATION-TYPE
	OBJECTS { alarmLVD1open}
	STATUS     current
	DESCRIPTION 
		"The A Bus (primary loads) Contactor is open alarm"
	::= { dcSystemTraps 8 }

alarmLVD2openTrap  NOTIFICATION-TYPE
	OBJECTS { alarmLVD2open}
	STATUS     current
	DESCRIPTION 
		"The B Bus (secondary loads) Contactor is open alarm"
	::= { dcSystemTraps 9 }

alarmLVD3openTrap  NOTIFICATION-TYPE
	OBJECTS { alarmLVD3open}
	STATUS     current
	DESCRIPTION 
		"The C Bus (critical loads) Contactor alarm. The contactor dropout voltage has been
		 reached and the contactor is released.
		"
	::= { dcSystemTraps 10 }

alarmACmainsTrap  NOTIFICATION-TYPE
	OBJECTS { alarmACmains}
	STATUS     current
	DESCRIPTION 
		"The AC voltage has dropped below critical level, 
		or one or more AC input phases was lost."
	::= { dcSystemTraps 11 }

alarmBatteryBreakerOpenTrap  NOTIFICATION-TYPE
	OBJECTS { alarmBatteryBreakerOpen}
	STATUS     current
	DESCRIPTION 
		"Battery string disconnect breaker/fuse alarm"
	::= { dcSystemTraps 12 }

alarmDistributionBreakerOpenTrap  NOTIFICATION-TYPE
	OBJECTS { alarmDistributionBreakerOpen}
	STATUS     current
	DESCRIPTION 
		"The Load Distribution breaker/fuse alarm"
	::= { dcSystemTraps 13 }

alarmMajorRectifierTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMajorRectifier}
	STATUS     current
	DESCRIPTION 
		"This is a 'multiple rectifiers have failed' alarm"
	::= { dcSystemTraps 14 }

alarmMinorRectifierTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMinorRectifier}
	STATUS     current
	DESCRIPTION 
		"This is a 'one rectifier has failed' alarm"
	::= { dcSystemTraps 15 }

alarmMajorBatteryMidpointTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMajorBatteryMidpoint}
	STATUS     current
	DESCRIPTION 
		"Battery Symmetry (midpoint) Delta Voltage out of 'major fault' limits alarm"
	::= { dcSystemTraps 16 }

alarmMinorBatteryMidpointTrap  NOTIFICATION-TYPE
	OBJECTS { alarmMinorBatteryMidpoint}
	STATUS     current
	DESCRIPTION 
		"Battery Symmetry (midpoint) Delta Voltage out of limits alarm"
	::= { dcSystemTraps 17 }

alarmBatteryLifeEndedTrap  NOTIFICATION-TYPE
	OBJECTS { alarmBatteryLifeEnded}
	STATUS     current
	DESCRIPTION 
		"The battery capacity has dropped below critical level. 
		A battery test has measured the fully charged capacity to be too low, 
		and thus probably the battery lifecycle to be near expired."
	::= { dcSystemTraps 18 }

alarmBatteryTestmodeEnteredTrap  NOTIFICATION-TYPE
	OBJECTS { alarmBatteryTestmodeEntered}
	STATUS     current
	DESCRIPTION 
		"The system has lowered the battery charge voltage in order to discharge the batteries 
		to a predefinend level. When the criteria for stopping the battery testing is reached, the 
		charge voltage is increased to commence normal charging."
	::= { dcSystemTraps 19 }

alarmBatteryBoostmodeEnteredTrap  NOTIFICATION-TYPE
	OBJECTS { alarmBatteryBoostmodeEntered}
	STATUS     current
	DESCRIPTION 
		"The system has increased the battery charge voltage in order to equalize the 
		battery cells charging. When the criteria for stopping the battery equalizing is reached, 
		the charge voltage is lowered to commence normal charging."
	::= { dcSystemTraps 20 }

alarmUserConfigurable1Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable1}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 21 }

alarmUserConfigurable2Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable2}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 22 }

alarmUserConfigurable3Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable3}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 23 }

alarmUserConfigurable4Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable4}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 24 }

alarmUserConfigurable5Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable5}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 25 }

alarmUserConfigurable6Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable6}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 26 }

alarmUserConfigurable7Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable7}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 27 }

alarmUserConfigurable8Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable8}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 28 }

alarmUserConfigurable9Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable9}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 29 }

alarmUserConfigurable10Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable10}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 30 }

alarmUserConfigurable11Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable11}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 31 }

alarmUserConfigurable12Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable12}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 32 }

alarmUserConfigurable13Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable13}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 33 }

alarmUserConfigurable14Trap  NOTIFICATION-TYPE
	OBJECTS { alarmUserConfigurable14}
	STATUS     current
	DESCRIPTION 
		"Generic alarm linked to user specified alarms. These have no specific name in the MIB. 
		User configurable alarms will on some systems have text attached to the traps 
		that explains the purpose of the alarm. "
	::= { dcSystemTraps 34 }




END


-- This MIB was created using NuDesign Team's Visual MIBuilder (Ver 4.4).