-- ***************************************************************** -- EKINOPS-Pmlma10.TXT: MIB -- --MIB Part Number:3MI00034AAAC --MIB Version:02 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pmlma10-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulePmlma10 MODULE-IDENTITY LAST-UPDATED "201606020000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.fr" DESCRIPTION "Creation." REVISION "201410090000Z" DESCRIPTION "Creation for PMLMA10" REVISION "201501270000Z" DESCRIPTION "Creation for PMLMA10" REVISION "201510210000Z" DESCRIPTION "Add F0 objet" REVISION "201605200000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" REVISION "201606020000Z" DESCRIPTION "Capabilities objects of Table 5" ::= { ekinops 68 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pmlma10alarms OBJECT IDENTIFIER ::= { modulePmlma10 2 } pmlma10AlmOther OBJECT IDENTIFIER ::= { pmlma10alarms 1 } pmlma10AlmOtherNurg OBJECT IDENTIFIER ::= { pmlma10AlmOther 1 } pmlma10AlmOtherUrg OBJECT IDENTIFIER ::= { pmlma10AlmOther 2 } pmlma10AlmOtherCrit OBJECT IDENTIFIER ::= { pmlma10AlmOther 3 } pmlma10AlmClient OBJECT IDENTIFIER ::= { pmlma10alarms 2 } pmlma10AlmClientNurg OBJECT IDENTIFIER ::= { pmlma10AlmClient 1 } pmlma10AlmClientUrg OBJECT IDENTIFIER ::= { pmlma10AlmClient 2 } pmlma10AlmClientCrit OBJECT IDENTIFIER ::= { pmlma10AlmClient 3 } pmlma10AlmLine OBJECT IDENTIFIER ::= { pmlma10alarms 3 } pmlma10AlmLineNurg OBJECT IDENTIFIER ::= { pmlma10AlmLine 1 } pmlma10AlmLineUrg OBJECT IDENTIFIER ::= { pmlma10AlmLine 2 } pmlma10AlmLineCrit OBJECT IDENTIFIER ::= { pmlma10AlmLine 3 } pmlma10measures OBJECT IDENTIFIER ::= { modulePmlma10 3 } pmlma10MesrOther OBJECT IDENTIFIER ::= { pmlma10measures 1 } pmlma10MesrClient OBJECT IDENTIFIER ::= { pmlma10measures 2 } pmlma10MesrLine OBJECT IDENTIFIER ::= { pmlma10measures 3 } pmlma10counters OBJECT IDENTIFIER ::= { modulePmlma10 4 } pmlma10CntOther OBJECT IDENTIFIER ::= { pmlma10counters 1 } pmlma10CntClient OBJECT IDENTIFIER ::= { pmlma10counters 2 } pmlma10CntLine OBJECT IDENTIFIER ::= { pmlma10counters 3 } pmlma10controlsWrite OBJECT IDENTIFIER ::= { modulePmlma10 6 } pmlma10CtrlOther OBJECT IDENTIFIER ::= { pmlma10controlsWrite 1 } pmlma10CtrlClient OBJECT IDENTIFIER ::= { pmlma10controlsWrite 2 } pmlma10CtrlLine OBJECT IDENTIFIER ::= { pmlma10controlsWrite 3 } pmlma10ri OBJECT IDENTIFIER ::= { modulePmlma10 7 } pmlma10riTable OBJECT IDENTIFIER ::= { pmlma10ri 1 } pmlma10download OBJECT IDENTIFIER ::= { modulePmlma10 8 } pmlma10DwlOther OBJECT IDENTIFIER ::= { pmlma10download 1 } pmlma10DwlClient OBJECT IDENTIFIER ::= { pmlma10download 2 } pmlma10DwlLine OBJECT IDENTIFIER ::= { pmlma10download 3 } pmlma10Config OBJECT IDENTIFIER ::= { modulePmlma10 9 } pmlma10traps OBJECT IDENTIFIER ::= { modulePmlma10 10 } pmlma10Monitoring OBJECT IDENTIFIER ::= { modulePmlma10 11} pmlma10MonOther OBJECT IDENTIFIER ::= { pmlma10Monitoring 1 } pmlma10MonRmon OBJECT IDENTIFIER ::= { pmlma10MonOther 3 } pmlma10MonClient OBJECT IDENTIFIER ::= { pmlma10Monitoring 2 } pmlma10MonClientRmonCounter OBJECT IDENTIFIER ::= { pmlma10MonClient 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** Pmlma10MultiRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different rate for a client port" SYNTAX INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } Pmlma10OtxMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OTX-TLH on client and line ports" SYNTAX INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } Pmlma10OtxGrid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different grids on OTX-TLH on client and line ports" SYNTAX INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } Pmlma10AdjustValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values in Adjust mode on OTX-TLH on client and line ports" SYNTAX INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } Pmlma10ClientProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the protocol on the client ports" SYNTAX INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } Pmlma10ProtocolMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the protocol mode" SYNTAX INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } Pmlma10OtxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on transceiver Tx line ports" SYNTAX INTEGER Pmlma10OrxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on transceiver Rx line ports" SYNTAX INTEGER Pmlma10ClientIgnoreTimer ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the ignore timer on the client ports" SYNTAX INTEGER { ignoretimerclientvalue0(0), ignoretimerclientvalue1(1), ignoretimerclientvalue2(2), ignoretimerclientvalue3(3), ignoretimerclientvalue4(4), ignoretimerclientvalue5(5), ignoretimerclientvalue6(6), ignoretimerclientvalue7(7), ignoretimerclientvalue8(8), ignoretimerclientvalue9(9), ignoretimerclientvalue10(10) } Pmlma10DccMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Mode for DCC" SYNTAX INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pmlma10RinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pmlma10ri 2 } pmlma10RinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pmlma10ri 3 } pmlma10RinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pmlma10ri 4 } pmlma10RinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pmlma10ri 5 } pmlma10RinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform description: This OID contains the description of the Gateware platform." ::= { pmlma10ri 6 } pmlma10RinvSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10RinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pmlma10riTable 1 } pmlma10RinvSfpEntry OBJECT-TYPE SYNTAX Pmlma10RinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the SFP table" INDEX { pmlma10RinvSfpIndex } ::= { pmlma10RinvSfpTable 1 } Pmlma10RinvSfpEntry::= SEQUENCE { pmlma10RinvSfpIndex Integer32, pmlma10Rinvsfp DisplayString } pmlma10RinvSfpIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for SFP table" ::= { pmlma10RinvSfpEntry 1 } pmlma10Rinvsfp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the SFP" ::= { pmlma10RinvSfpEntry 2 } pmlma10RinvLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10RinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the XFPs on the selected module" ::= { pmlma10riTable 2 } pmlma10RinvLineEntry OBJECT-TYPE SYNTAX Pmlma10RinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the XFP table" INDEX { pmlma10RinvLineIndex } ::= { pmlma10RinvLineTable 1 } Pmlma10RinvLineEntry::= SEQUENCE { pmlma10RinvLineIndex Integer32, pmlma10RinvxfpLine DisplayString } pmlma10RinvLineIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for XFP table" ::= { pmlma10RinvLineEntry 1 } pmlma10RinvxfpLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the XFP: This OID contains the inventory for the XFP" ::= { pmlma10RinvLineEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pmlma10AlmsynthAlm0 OBJECT IDENTIFIER ::= { pmlma10AlmOtherCrit 0 } pmlma10AlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmsynthAlm0 16 } pmlma10AlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmsynthAlm0 15 } pmlma10AlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the RM This alarm is set on detection of a failure originating from the equipment MOD_GLOB_FAIL other (1) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlm0 9 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pmlma10AlmsynthAlm2 OBJECT IDENTIFIER ::= { pmlma10AlmOtherNurg 2 } pmlma10AlmCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Not Used :This OID, when set, indicates that alarm correlation is not being performed. CORRELAT_OFF informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlm2 4 } pmlma10AlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlm2 3 } pmlma10AlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlm2 2 } pmlma10AlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlm2 1 } --- ********************************************************* --- TABLE for the pmlma10AlmsynthAlmPort articles --- ********************************************************* pmlma10AlmsynthAlmPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmsynthAlmPort Article " ::= { pmlma10AlmClientCrit 8 } pmlma10AlmsynthAlmPortEntry OBJECT-TYPE SYNTAX Pmlma10AlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmsynthAlmPort table " INDEX { pmlma10AlmsynthAlmPortIndex } ::= { pmlma10AlmsynthAlmPortTable 1 } Pmlma10AlmsynthAlmPortEntry ::= SEQUENCE { pmlma10AlmsynthAlmPortIndex INTEGER, pmlma10AlmUpCsfPortn EkiOnOff, pmlma10AlmFailAccPortn EkiOnOff, pmlma10AlmSfpDdmAlmPortn EkiOnOff, pmlma10AlmSfpDdmWarningPortn EkiOnOff, pmlma10AlmDwCaisPortn EkiOnOff, pmlma10AlmClientRemoteOosPortn EkiOnOff, pmlma10AlmClientLocalOosPortn EkiOnOff, pmlma10AlmDwLsdPortn EkiOnOff, pmlma10AlmHwFailAccPortn EkiOnOff, pmlma10AlmDdmAbsentPortn EkiOnOff, pmlma10AlmSfpAbsentPortn EkiOnOff } pmlma10AlmsynthAlmPortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmsynthAlmPort table " ::= { pmlma10AlmsynthAlmPortEntry 1 } pmlma10AlmUpCsfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. This status indicates if a Client Signal Fail is currently inserted on the line signal for this client port UP_CSF_1 informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmPortEntry 17 } pmlma10AlmFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Access Fail :This OID indicates a failure on the Client port This alarm indicates a failure on the Client port FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmPortEntry 13 } pmlma10AlmSfpDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM This alarm indicates if a DDM Alarm has been detected on the client transceiver SFP_DDM_ALM_1 inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmPortEntry 11 } pmlma10AlmSfpDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM This alarm indicates if a DDM Warning has been detected on the client transceiver SFP_DDM_WARNING_1 inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmPortEntry 10 } pmlma10AlmDwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface DW_CAIS_1 informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmPortEntry 9 } pmlma10AlmClientRemoteOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) This status indicates if the remote client port is in service CLIENT_REMOTE_OOS informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmPortEntry 8 } pmlma10AlmClientLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) This status indicates if the local client port is in service CLIENT_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmPortEntry 7 } pmlma10AlmDwLsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown This status indicates if the client transceiver laser is shutdown DW_LSD_1 other (1) equipmentAlarm (5) (2) " ::= { pmlma10AlmsynthAlmPortEntry 6 } pmlma10AlmHwFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. This alarm indicates a failure on client port, most probably caused by a HW issue. HW_FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmPortEntry 5 } pmlma10AlmDdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function This status indicates if the client transceiver includes the DDM feature DDM_ABSENT_1 informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmPortEntry 3 } pmlma10AlmSfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. This alarm indicates if the client transceiver is not plugged SFP_ABSENT_1 inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pmlma10AlmsynthAlmPortEntry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmsynthAlmLine articles --- ********************************************************* pmlma10AlmsynthAlmLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmsynthAlmLine Article " ::= { pmlma10AlmLineCrit 24 } pmlma10AlmsynthAlmLineEntry OBJECT-TYPE SYNTAX Pmlma10AlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmsynthAlmLine table " INDEX { pmlma10AlmsynthAlmLineIndex } ::= { pmlma10AlmsynthAlmLineTable 1 } Pmlma10AlmsynthAlmLineEntry ::= SEQUENCE { pmlma10AlmsynthAlmLineIndex INTEGER, pmlma10AlmLineFailPortn EkiOnOff, pmlma10AlmLineDdmAlmPortn EkiOnOff, pmlma10AlmLineDdmWarningPortn EkiOnOff, pmlma10AlmUpRdiInsPortn EkiOnOff, pmlma10AlmLineLocalOosPortn EkiOnOff, pmlma10AlmLineTxOffPortn EkiOnOff, pmlma10AlmLineHwFailPortn EkiOnOff, pmlma10AlmLineDdmAbsentPortn EkiOnOff, pmlma10AlmLineSfpAbsentPortn EkiOnOff } pmlma10AlmsynthAlmLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmsynthAlmLine table " ::= { pmlma10AlmsynthAlmLineEntry 1 } pmlma10AlmLineFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port This alarm indicates a failure on the line port LINE_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmLineEntry 13 } pmlma10AlmLineDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM This alarm indicates if a DDM Alarm has been detected on the line transceiver LINE_DDM_ALM inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmLineEntry 11 } pmlma10AlmLineDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM This alarm indicates if a DDM Warning has been detected on the line transceiver LINE_DDM_WARNING inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmLineEntry 10 } pmlma10AlmUpRdiInsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. This status indicates if a MS-RDI/L-RDI is currently inserted on the line interface. UP_RDI_INS informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmLineEntry 9 } pmlma10AlmLineLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) This status indicates if the line port is in service LINE_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmsynthAlmLineEntry 7 } pmlma10AlmLineTxOffPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown This status indicates if the Line transceiver laser is shutdown LINE_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pmlma10AlmsynthAlmLineEntry 6 } pmlma10AlmLineHwFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue This alarm indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmlma10AlmsynthAlmLineEntry 5 } pmlma10AlmLineDdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Ready :This OID indicates that the optical interface is not operational. This status indicates if the line transceiver has been correctly initialized LINE_DDM_ABSENT_1 equipmentMalfunction (16) other (1) (2) " ::= { pmlma10AlmsynthAlmLineEntry 3 } pmlma10AlmLineSfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Absent :This OID indicates that the line optical interface is not present. This alarm indicates if the line transceiver is not plugged LINE_SFP_ABSENT_1 inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pmlma10AlmsynthAlmLineEntry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmclientHostLaneFault articles --- ********************************************************* pmlma10AlmclientHostLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmclientHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmclientHostLaneFault Article " ::= { pmlma10AlmClientUrg 88 } pmlma10AlmclientHostLaneFaultEntry OBJECT-TYPE SYNTAX Pmlma10AlmclientHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmclientHostLaneFault table " INDEX { pmlma10AlmclientHostLaneFaultIndex } ::= { pmlma10AlmclientHostLaneFaultTable 1 } Pmlma10AlmclientHostLaneFaultEntry ::= SEQUENCE { pmlma10AlmclientHostLaneFaultIndex INTEGER, pmlma10AlmClientLaneTxFifoErrorPortn EkiOnOff, pmlma10AlmClientCsfDetectedPortn EkiOnOff, pmlma10AlmClientInputLossOfSigPortn EkiOnOff, pmlma10AlmClientLossOfSyncPortn EkiOnOff } pmlma10AlmclientHostLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmclientHostLaneFault table " ::= { pmlma10AlmclientHostLaneFaultEntry 1 } pmlma10AlmClientLaneTxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Alarm indicating a Tx FIFO Error on the Client Trscv CLIENT_LANE_TX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientHostLaneFaultEntry 11 } pmlma10AlmClientCsfDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction This alarm indicates if a Client Signal Fail has been detected in the incoming line frame for this client port CLIENT_CSF_DETECTED receiveFailure (41) other(1) (2) " ::= { pmlma10AlmclientHostLaneFaultEntry 7 } pmlma10AlmClientInputLossOfSigPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv Alarm indicating a Loss of Signal is detected on the Client Trscv CLIENT_INPUT_LOSS_OF_SIG receiveFailure (41) physicalViolation (9) (2) " ::= { pmlma10AlmclientHostLaneFaultEntry 3 } pmlma10AlmClientLossOfSyncPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal Alarm indicating the module is not aligned with the incoming client signal CLIENT_LOSS_OF_SYNC receiveFailure (41) integrityViolation (7) (2) " ::= { pmlma10AlmclientHostLaneFaultEntry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmlineNetworkLaneAlarmWarning1 articles --- ********************************************************* pmlma10AlmlineNetworkLaneAlarmWarning1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmlineNetworkLaneAlarmWarning1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmlineNetworkLaneAlarmWarning1 Article " ::= { pmlma10AlmLineUrg 104 } pmlma10AlmlineNetworkLaneAlarmWarning1Entry OBJECT-TYPE SYNTAX Pmlma10AlmlineNetworkLaneAlarmWarning1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmlineNetworkLaneAlarmWarning1 table " INDEX { pmlma10AlmlineNetworkLaneAlarmWarning1Index } ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Table 1 } Pmlma10AlmlineNetworkLaneAlarmWarning1Entry ::= SEQUENCE { pmlma10AlmlineNetworkLaneAlarmWarning1Index INTEGER, pmlma10AlmLineRxPwrHighAlaPortn EkiOnOff, pmlma10AlmLineRxPwrLowAlaPortn EkiOnOff, pmlma10AlmLineTempHighAlaPortn EkiOnOff, pmlma10AlmLineTempLowAlaPortn EkiOnOff, pmlma10AlmLineVccHighAlaPortn EkiOnOff, pmlma10AlmLineVccLowAlaPortn EkiOnOff, pmlma10AlmLineTxBiasHighAlaPortn EkiOnOff, pmlma10AlmLineTxBiasLowAlaPortn EkiOnOff, pmlma10AlmLineTxPwrHighAlaPortn EkiOnOff, pmlma10AlmLineTxPwrLowAlaPortn EkiOnOff } pmlma10AlmlineNetworkLaneAlarmWarning1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmlineNetworkLaneAlarmWarning1 table " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 1 } pmlma10AlmLineRxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM LINE_RX_PWR_HIGH_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 17 } pmlma10AlmLineRxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM LINE_RX_PWR_LOW_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 16 } pmlma10AlmLineTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM LINE_TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 9 } pmlma10AlmLineTempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM LINE_TEMP_LOW_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 8 } pmlma10AlmLineVccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM LINE_VCC_HIGH_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 7 } pmlma10AlmLineVccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM LINE_VCC_LOW_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 6 } pmlma10AlmLineTxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM LINE_TX_BIAS_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 5 } pmlma10AlmLineTxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM LINE_TX_BIAS_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 4 } pmlma10AlmLineTxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM LINE_TX_PWR_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 3 } pmlma10AlmLineTxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM LINE_TX_PWR_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning1Entry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmlineNetworkLaneAlarmWarning2 articles --- ********************************************************* pmlma10AlmlineNetworkLaneAlarmWarning2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmlineNetworkLaneAlarmWarning2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmlineNetworkLaneAlarmWarning2 Article " ::= { pmlma10AlmLineUrg 120 } pmlma10AlmlineNetworkLaneAlarmWarning2Entry OBJECT-TYPE SYNTAX Pmlma10AlmlineNetworkLaneAlarmWarning2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmlineNetworkLaneAlarmWarning2 table " INDEX { pmlma10AlmlineNetworkLaneAlarmWarning2Index } ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Table 1 } Pmlma10AlmlineNetworkLaneAlarmWarning2Entry ::= SEQUENCE { pmlma10AlmlineNetworkLaneAlarmWarning2Index INTEGER, pmlma10AlmLineRxPwrHighWngPortn EkiOnOff, pmlma10AlmLineRxPwrLowWngPortn EkiOnOff, pmlma10AlmLineTempHighWngPortn EkiOnOff, pmlma10AlmLineTempLowWngPortn EkiOnOff, pmlma10AlmLineVccHighWngPortn EkiOnOff, pmlma10AlmLineVccLowWngPortn EkiOnOff, pmlma10AlmLineTxBiasHighWngPortn EkiOnOff, pmlma10AlmLineTxBiasLowWngPortn EkiOnOff, pmlma10AlmLineTxPwrHighWngPortn EkiOnOff, pmlma10AlmLineTxPwLowWngPortn EkiOnOff } pmlma10AlmlineNetworkLaneAlarmWarning2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmlineNetworkLaneAlarmWarning2 table " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 1 } pmlma10AlmLineRxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM LINE_RX_PWR_HIGH_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 17 } pmlma10AlmLineRxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM LINE_RX_PWR_LOW_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 16 } pmlma10AlmLineTempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM LINE_TEMP_HIGH_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 9 } pmlma10AlmLineTempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM LINE_TEMP_LOW_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 8 } pmlma10AlmLineVccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM LINE_VCC_HIGH_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 7 } pmlma10AlmLineVccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM LINE_VCC_LOW_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 6 } pmlma10AlmLineTxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM LINE_TX_BIAS_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 5 } pmlma10AlmLineTxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM LINE_TX_BIAS_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 4 } pmlma10AlmLineTxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM LINE_TX_PWR_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 3 } pmlma10AlmLineTxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM LINE_TX_PW_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmlineNetworkLaneAlarmWarning2Entry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmlineHostLaneFault articles --- ********************************************************* pmlma10AlmlineHostLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmlineHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmlineHostLaneFault Article " ::= { pmlma10AlmLineUrg 152 } pmlma10AlmlineHostLaneFaultEntry OBJECT-TYPE SYNTAX Pmlma10AlmlineHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmlineHostLaneFault table " INDEX { pmlma10AlmlineHostLaneFaultIndex } ::= { pmlma10AlmlineHostLaneFaultTable 1 } Pmlma10AlmlineHostLaneFaultEntry ::= SEQUENCE { pmlma10AlmlineHostLaneFaultIndex INTEGER, pmlma10AlmLineSmBdiDetectedPortn EkiOnOff, pmlma10AlmLineSmBdiInsertedPortn EkiOnOff, pmlma10AlmLineLossOfFramePortn EkiOnOff, pmlma10AlmLineInputLossOfSignalPortn EkiOnOff } pmlma10AlmlineHostLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmlineHostLaneFault table " ::= { pmlma10AlmlineHostLaneFaultEntry 1 } pmlma10AlmLineSmBdiDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal LINE_SM_BDI_DETECTED receiveFailure (41) integrityViolation (7) (2) " ::= { pmlma10AlmlineHostLaneFaultEntry 5 } pmlma10AlmLineSmBdiInsertedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal LINE_SM_BDI_INSERTED informationalStatus(1000) other (1) (2) " ::= { pmlma10AlmlineHostLaneFaultEntry 4 } pmlma10AlmLineLossOfFramePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal Alarm indicating the module is not aligned with the incoming Line signal LINE_LOSS_OF_FRAME receiveFailure (41) integrityViolation (7) (2) " ::= { pmlma10AlmlineHostLaneFaultEntry 3 } pmlma10AlmLineInputLossOfSignalPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv Alarm indicating a Loss of Signal is detected on the Line Trscv LINE_INPUT_LOSS_OF_SIGNAL receiveFailure (41) physicalViolation (9) (2) " ::= { pmlma10AlmlineHostLaneFaultEntry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmclientSfpAlmDdm articles --- ********************************************************* pmlma10AlmclientSfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmclientSfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmclientSfpAlmDdm Article " ::= { pmlma10AlmClientUrg 216 } pmlma10AlmclientSfpAlmDdmEntry OBJECT-TYPE SYNTAX Pmlma10AlmclientSfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmclientSfpAlmDdm table " INDEX { pmlma10AlmclientSfpAlmDdmIndex } ::= { pmlma10AlmclientSfpAlmDdmTable 1 } Pmlma10AlmclientSfpAlmDdmEntry ::= SEQUENCE { pmlma10AlmclientSfpAlmDdmIndex INTEGER, pmlma10AlmClientRxPwrHighAlaPortn EkiOnOff, pmlma10AlmClientRxPwrLowAlaPortn EkiOnOff, pmlma10AlmClientTempHighAlaPortn EkiOnOff, pmlma10AlmClientTempLowAlaPortn EkiOnOff, pmlma10AlmClientVccHighAlaPortn EkiOnOff, pmlma10AlmClientVccLowAlaPortn EkiOnOff, pmlma10AlmClientTxBiasHighAlaPortn EkiOnOff, pmlma10AlmClientTxBiasLowAlaPortn EkiOnOff, pmlma10AlmClientTxPwrHighAlaPortn EkiOnOff, pmlma10AlmClientTxPwrLowAlaPortn EkiOnOff } pmlma10AlmclientSfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmclientSfpAlmDdm table " ::= { pmlma10AlmclientSfpAlmDdmEntry 1 } pmlma10AlmClientRxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM CLIENT_RX_PWR_HIGH_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 17 } pmlma10AlmClientRxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM CLIENT_RX_PWR_LOW_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 16 } pmlma10AlmClientTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM CLIENT_TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 9 } pmlma10AlmClientTempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM CLIENT_TEMP_LOW_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 8 } pmlma10AlmClientVccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM CLIENT_VCC_HIGH_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 7 } pmlma10AlmClientVccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM CLIENT_VCC_LOW_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 6 } pmlma10AlmClientTxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_BIAS_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 5 } pmlma10AlmClientTxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_BIAS_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 4 } pmlma10AlmClientTxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_PWR_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 3 } pmlma10AlmClientTxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_PWR_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pmlma10AlmclientSfpWarnDdm articles --- ********************************************************* pmlma10AlmclientSfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10AlmclientSfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10AlmclientSfpWarnDdm Article " ::= { pmlma10AlmClientNurg 232 } pmlma10AlmclientSfpWarnDdmEntry OBJECT-TYPE SYNTAX Pmlma10AlmclientSfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10AlmclientSfpWarnDdm table " INDEX { pmlma10AlmclientSfpWarnDdmIndex } ::= { pmlma10AlmclientSfpWarnDdmTable 1 } Pmlma10AlmclientSfpWarnDdmEntry ::= SEQUENCE { pmlma10AlmclientSfpWarnDdmIndex INTEGER, pmlma10AlmClientRxPwrHighWngPortn EkiOnOff, pmlma10AlmClientRxPwrLowWngPortn EkiOnOff, pmlma10AlmClientTempHighWngPortn EkiOnOff, pmlma10AlmClientTempLowWngPortn EkiOnOff, pmlma10AlmClientVccHighWngPortn EkiOnOff, pmlma10AlmClientVccLowWngPortn EkiOnOff, pmlma10AlmClientTxBiasHighWngPortn EkiOnOff, pmlma10AlmClientTxBiasLowWngPortn EkiOnOff, pmlma10AlmClientTxPwrHighWngPortn EkiOnOff, pmlma10AlmClientTxPwLowWngPortn EkiOnOff } pmlma10AlmclientSfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10AlmclientSfpWarnDdm table " ::= { pmlma10AlmclientSfpWarnDdmEntry 1 } pmlma10AlmClientRxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM CLIENT_RX_PWR_HIGH_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 17 } pmlma10AlmClientRxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM CLIENT_RX_PWR_LOW_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 16 } pmlma10AlmClientTempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM CLIENT_TEMP_HIGH_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 9 } pmlma10AlmClientTempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM CLIENT_TEMP_LOW_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 8 } pmlma10AlmClientVccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM CLIENT_VCC_HIGH_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 7 } pmlma10AlmClientVccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM CLIENT_VCC_LOW_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 6 } pmlma10AlmClientTxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_BIAS_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 5 } pmlma10AlmClientTxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_BIAS_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 4 } pmlma10AlmClientTxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_PWR_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 3 } pmlma10AlmClientTxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_PW_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmlma10AlmclientSfpWarnDdmEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the confMgnt1 article --- ***************************************************** pmlma10CtrlconfMgnt1 OBJECT IDENTIFIER ::= { pmlma10CtrlOther 1 } pmlma10CtrlConf2Clear1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. This control restores the default configuration of the module " ::= { pmlma10CtrlconfMgnt1 14 } pmlma10CtrlConf2Flash1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. This control saves the customer configuration on the module " ::= { pmlma10CtrlconfMgnt1 10 } pmlma10CtrlConf2Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. " ::= { pmlma10CtrlconfMgnt1 2 } pmlma10CtrlConf1Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. " ::= { pmlma10CtrlconfMgnt1 1 } --- ***************************************************** --- LEAF for the synth4 article --- ***************************************************** pmlma10Ctrlsynth4 OBJECT IDENTIFIER ::= { pmlma10CtrlOther 4 } pmlma10CtrlCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Disable Alarm Correlation :This OID disables the alarm correlation in the PM. " ::= { pmlma10Ctrlsynth4 2 } pmlma10CtrlCorrelatOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Alarm Correlation :This OID enables the alarm correlation in the PM. " ::= { pmlma10Ctrlsynth4 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pmlma10CtrlswMgnt OBJECT IDENTIFIER ::= { pmlma10CtrlOther 5 } pmlma10CtrlLoadSwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. This controls selects the second SW bank as the active bank for the next module reset " ::= { pmlma10CtrlswMgnt 6 } pmlma10CtrlLoadSwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. This controls selects the first SW bank as the active bank for the next module reset " ::= { pmlma10CtrlswMgnt 5 } pmlma10CtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. This control initiates a warm reset of the module. " ::= { pmlma10CtrlswMgnt 3 } pmlma10CtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pmlma10CtrlswMgnt 2 } --- ***************************************************** --- LEAF for the gwMgnt article --- ***************************************************** pmlma10CtrlgwMgnt OBJECT IDENTIFIER ::= { pmlma10CtrlOther 6 } pmlma10CtrlLoadGwBank4 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pmlma10CtrlgwMgnt 8 } pmlma10CtrlLoadGwBank3 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the third GW bank as the active bank " ::= { pmlma10CtrlgwMgnt 7 } pmlma10CtrlLoadGwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pmlma10CtrlgwMgnt 6 } pmlma10CtrlLoadGwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the first GW bank as the active bank " ::= { pmlma10CtrlgwMgnt 5 } pmlma10CtrlCurrentGwReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. " ::= { pmlma10CtrlgwMgnt 1 } --- ********************************************************* --- TABLE for the pmlma10CtrlaccessLoop articles --- ********************************************************* pmlma10CtrlaccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrlaccessLoop Article " ::= { pmlma10CtrlClient 16 } pmlma10CtrlaccessLoopEntry OBJECT-TYPE SYNTAX Pmlma10CtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrlaccessLoop table " INDEX { pmlma10CtrlaccessLoopIndex } ::= { pmlma10CtrlaccessLoopTable 1 } Pmlma10CtrlaccessLoopEntry ::= SEQUENCE { pmlma10CtrlaccessLoopIndex INTEGER, pmlma10CtrlaccessLoopPortn EkiState } pmlma10CtrlaccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrlaccessLoop table " ::= { pmlma10CtrlaccessLoopEntry 1 } pmlma10CtrlaccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. This control enables the Out Loopback on the client port, looping the client input signal on the client output " ::= { pmlma10CtrlaccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pmlma10CtrlclientLoopToLine articles --- ********************************************************* pmlma10CtrlclientLoopToLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrlclientLoopToLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrlclientLoopToLine Article " ::= { pmlma10CtrlClient 17 } pmlma10CtrlclientLoopToLineEntry OBJECT-TYPE SYNTAX Pmlma10CtrlclientLoopToLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrlclientLoopToLine table " INDEX { pmlma10CtrlclientLoopToLineIndex } ::= { pmlma10CtrlclientLoopToLineTable 1 } Pmlma10CtrlclientLoopToLineEntry ::= SEQUENCE { pmlma10CtrlclientLoopToLineIndex INTEGER, pmlma10CtrlclientLoopToLinePortn EkiState } pmlma10CtrlclientLoopToLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrlclientLoopToLine table " ::= { pmlma10CtrlclientLoopToLineEntry 1 } pmlma10CtrlclientLoopToLinePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. This control enables the In Loopback on the client port, looping the client output signal on the client input " ::= { pmlma10CtrlclientLoopToLineEntry 2 } --- ********************************************************* --- TABLE for the pmlma10CtrlcsfUpIns articles --- ********************************************************* pmlma10CtrlcsfUpInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrlcsfUpIns Article " ::= { pmlma10CtrlClient 21 } pmlma10CtrlcsfUpInsEntry OBJECT-TYPE SYNTAX Pmlma10CtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrlcsfUpIns table " INDEX { pmlma10CtrlcsfUpInsIndex } ::= { pmlma10CtrlcsfUpInsTable 1 } Pmlma10CtrlcsfUpInsEntry ::= SEQUENCE { pmlma10CtrlcsfUpInsIndex INTEGER, pmlma10CtrlcsfUpInsPortn EkiState } pmlma10CtrlcsfUpInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrlcsfUpIns table " ::= { pmlma10CtrlcsfUpInsEntry 1 } pmlma10CtrlcsfUpInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. This control inserts a Client Signal Fail for the client port " ::= { pmlma10CtrlcsfUpInsEntry 2 } --- ********************************************************* --- TABLE for the pmlma10CtrlcaisDwIns articles --- ********************************************************* pmlma10CtrlcaisDwInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrlcaisDwIns Article " ::= { pmlma10CtrlClient 22 } pmlma10CtrlcaisDwInsEntry OBJECT-TYPE SYNTAX Pmlma10CtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrlcaisDwIns table " INDEX { pmlma10CtrlcaisDwInsIndex } ::= { pmlma10CtrlcaisDwInsTable 1 } Pmlma10CtrlcaisDwInsEntry ::= SEQUENCE { pmlma10CtrlcaisDwInsIndex INTEGER, pmlma10CtrlcaisDwInsPortn EkiState } pmlma10CtrlcaisDwInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrlcaisDwIns table " ::= { pmlma10CtrlcaisDwInsEntry 1 } pmlma10CtrlcaisDwInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. This control inserts a Client AIS for the client port " ::= { pmlma10CtrlcaisDwInsEntry 2 } --- ********************************************************* --- TABLE for the pmlma10CtrlcommAccessLoop articles --- ********************************************************* pmlma10CtrlcommAccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrlcommAccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrlcommAccessLoop Article " ::= { pmlma10CtrlLine 64 } pmlma10CtrlcommAccessLoopEntry OBJECT-TYPE SYNTAX Pmlma10CtrlcommAccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrlcommAccessLoop table " INDEX { pmlma10CtrlcommAccessLoopIndex } ::= { pmlma10CtrlcommAccessLoopTable 1 } Pmlma10CtrlcommAccessLoopEntry ::= SEQUENCE { pmlma10CtrlcommAccessLoopIndex INTEGER, pmlma10CtrlcommAccessLoopPortn EkiState } pmlma10CtrlcommAccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrlcommAccessLoop table " ::= { pmlma10CtrlcommAccessLoopEntry 1 } pmlma10CtrlcommAccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. This control enables the In Loopback on the line port, looping the 100 Gb/s output signal on the 100 Gb/s input " ::= { pmlma10CtrlcommAccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pmlma10CtrllineLoop articles --- ********************************************************* pmlma10CtrllineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrllineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrllineLoop Article " ::= { pmlma10CtrlLine 66 } pmlma10CtrllineLoopEntry OBJECT-TYPE SYNTAX Pmlma10CtrllineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrllineLoop table " INDEX { pmlma10CtrllineLoopIndex } ::= { pmlma10CtrllineLoopTable 1 } Pmlma10CtrllineLoopEntry ::= SEQUENCE { pmlma10CtrllineLoopIndex INTEGER, pmlma10CtrllineLoopPortn EkiState } pmlma10CtrllineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrllineLoop table " ::= { pmlma10CtrllineLoopEntry 1 } pmlma10CtrllineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Upstream part of the module is timed on the 10 Gb/s recovered clock in that case. This control enables the Out Loopback on the line port, looping the 100 Gb/s input signal on the 100 Gb/s output " ::= { pmlma10CtrllineLoopEntry 2 } --- ********************************************************* --- TABLE for the pmlma10CtrlfecDisable articles --- ********************************************************* pmlma10CtrlfecDisableTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CtrlfecDisable Article " ::= { pmlma10CtrlLine 69 } pmlma10CtrlfecDisableEntry OBJECT-TYPE SYNTAX Pmlma10CtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CtrlfecDisable table " INDEX { pmlma10CtrlfecDisableIndex } ::= { pmlma10CtrlfecDisableTable 1 } Pmlma10CtrlfecDisableEntry ::= SEQUENCE { pmlma10CtrlfecDisableIndex INTEGER, pmlma10CtrlfecDisablePortn EkiState } pmlma10CtrlfecDisableIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CtrlfecDisable table " ::= { pmlma10CtrlfecDisableEntry 1 } pmlma10CtrlfecDisablePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input This control enables/disables the Forward Error Correction on the line interface " ::= { pmlma10CtrlfecDisableEntry 2 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pmlma10CtrlledTest OBJECT IDENTIFIER ::= { pmlma10CtrlOther 192 } pmlma10CtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pmlma10CtrlledTest 3 } pmlma10CtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pmlma10CtrlledTest 2 } pmlma10CtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pmlma10CtrlledTest 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- COUNTERS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pmlma10CntclientCbipCounter articles --- ********************************************************* pmlma10CntclientCbipCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CntclientCbipCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CntclientCbipCounter Article " ::= { pmlma10CntClient 96 } pmlma10CntclientCbipCounterEntry OBJECT-TYPE SYNTAX Pmlma10CntclientCbipCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CntclientCbipCounter table " INDEX { pmlma10CntclientCbipCounterIndex } ::= { pmlma10CntclientCbipCounterTable 1 } Pmlma10CntclientCbipCounterEntry ::= SEQUENCE { pmlma10CntclientCbipCounterIndex INTEGER, pmlma10CntclientCbipCounterValuePortn Counter32, pmlma10CntclientCbipCounterErrorPortn EkiOnOff, pmlma10CntclientCbipCounterOverloadPortn EkiOnOff } pmlma10CntclientCbipCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CntclientCbipCounter table " ::= { pmlma10CntclientCbipCounterEntry 1 } pmlma10CntclientCbipCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream This counter gives the number of CBIP errors on the client port " ::= { pmlma10CntclientCbipCounterEntry 2 } pmlma10CntclientCbipCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port " ::= { pmlma10CntclientCbipCounterEntry 3 } pmlma10CntclientCbipCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port " ::= { pmlma10CntclientCbipCounterEntry 4 } --- ********************************************************* --- TABLE for the pmlma10CntlocalLineSmBip8ErrorCounter articles --- ********************************************************* pmlma10CntlocalLineSmBip8ErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CntlocalLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CntlocalLineSmBip8ErrorCounter Article " ::= { pmlma10CntLine 192 } pmlma10CntlocalLineSmBip8ErrorCounterEntry OBJECT-TYPE SYNTAX Pmlma10CntlocalLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CntlocalLineSmBip8ErrorCounter table " INDEX { pmlma10CntlocalLineSmBip8ErrorCounterIndex } ::= { pmlma10CntlocalLineSmBip8ErrorCounterTable 1 } Pmlma10CntlocalLineSmBip8ErrorCounterEntry ::= SEQUENCE { pmlma10CntlocalLineSmBip8ErrorCounterIndex INTEGER, pmlma10CntlocalLineSmBip8ErrorCounterValuePortn Counter32, pmlma10CntlocalLineSmBip8ErrorCounterErrorPortn EkiOnOff, pmlma10CntlocalLineSmBip8ErrorCounterOverloadPortn EkiOnOff } pmlma10CntlocalLineSmBip8ErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CntlocalLineSmBip8ErrorCounter table " ::= { pmlma10CntlocalLineSmBip8ErrorCounterEntry 1 } pmlma10CntlocalLineSmBip8ErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC " ::= { pmlma10CntlocalLineSmBip8ErrorCounterEntry 2 } pmlma10CntlocalLineSmBip8ErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port " ::= { pmlma10CntlocalLineSmBip8ErrorCounterEntry 3 } pmlma10CntlocalLineSmBip8ErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a B1 error counter overload on Port " ::= { pmlma10CntlocalLineSmBip8ErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pmlma10CntlocalLineFecCorrectedErrorsCounter articles --- ********************************************************* pmlma10CntlocalLineFecCorrectedErrorsCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CntlocalLineFecCorrectedErrorsCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CntlocalLineFecCorrectedErrorsCounter Article " ::= { pmlma10CntLine 200 } pmlma10CntlocalLineFecCorrectedErrorsCounterEntry OBJECT-TYPE SYNTAX Pmlma10CntlocalLineFecCorrectedErrorsCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CntlocalLineFecCorrectedErrorsCounter table " INDEX { pmlma10CntlocalLineFecCorrectedErrorsCounterIndex } ::= { pmlma10CntlocalLineFecCorrectedErrorsCounterTable 1 } Pmlma10CntlocalLineFecCorrectedErrorsCounterEntry ::= SEQUENCE { pmlma10CntlocalLineFecCorrectedErrorsCounterIndex INTEGER, pmlma10CntlocalLineFecCorrectedErrorsCounterValuePortn Counter32, pmlma10CntlocalLineFecCorrectedErrorsCounterErrorPortn EkiOnOff, pmlma10CntlocalLineFecCorrectedErrorsCounterOverloadPortn EkiOnOff } pmlma10CntlocalLineFecCorrectedErrorsCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CntlocalLineFecCorrectedErrorsCounter table " ::= { pmlma10CntlocalLineFecCorrectedErrorsCounterEntry 1 } pmlma10CntlocalLineFecCorrectedErrorsCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC This counter gives the current Bit Error Rate before the Hard Decision FEC " ::= { pmlma10CntlocalLineFecCorrectedErrorsCounterEntry 2 } pmlma10CntlocalLineFecCorrectedErrorsCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line " ::= { pmlma10CntlocalLineFecCorrectedErrorsCounterEntry 3 } pmlma10CntlocalLineFecCorrectedErrorsCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line " ::= { pmlma10CntlocalLineFecCorrectedErrorsCounterEntry 4 } --- ********************************************************* --- TABLE for the pmlma10CntremoteLineSmBip8ErrorCounter articles --- ********************************************************* pmlma10CntremoteLineSmBip8ErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CntremoteLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CntremoteLineSmBip8ErrorCounter Article " ::= { pmlma10CntLine 208 } pmlma10CntremoteLineSmBip8ErrorCounterEntry OBJECT-TYPE SYNTAX Pmlma10CntremoteLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CntremoteLineSmBip8ErrorCounter table " INDEX { pmlma10CntremoteLineSmBip8ErrorCounterIndex } ::= { pmlma10CntremoteLineSmBip8ErrorCounterTable 1 } Pmlma10CntremoteLineSmBip8ErrorCounterEntry ::= SEQUENCE { pmlma10CntremoteLineSmBip8ErrorCounterIndex INTEGER, pmlma10CntremoteLineSmBip8ErrorCounterValuePortn Counter32, pmlma10CntremoteLineSmBip8ErrorCounterErrorPortn EkiOnOff, pmlma10CntremoteLineSmBip8ErrorCounterOverloadPortn EkiOnOff } pmlma10CntremoteLineSmBip8ErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CntremoteLineSmBip8ErrorCounter table " ::= { pmlma10CntremoteLineSmBip8ErrorCounterEntry 1 } pmlma10CntremoteLineSmBip8ErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side " ::= { pmlma10CntremoteLineSmBip8ErrorCounterEntry 2 } pmlma10CntremoteLineSmBip8ErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Counter Error : " ::= { pmlma10CntremoteLineSmBip8ErrorCounterEntry 3 } pmlma10CntremoteLineSmBip8ErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Counter Overload : " ::= { pmlma10CntremoteLineSmBip8ErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pmlma10CntlineDfrmTimCnt articles --- ********************************************************* pmlma10CntlineDfrmTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CntlineDfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10CntlineDfrmTimCnt Article " ::= { pmlma10CntLine 216 } pmlma10CntlineDfrmTimCntEntry OBJECT-TYPE SYNTAX Pmlma10CntlineDfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10CntlineDfrmTimCnt table " INDEX { pmlma10CntlineDfrmTimCntIndex } ::= { pmlma10CntlineDfrmTimCntTable 1 } Pmlma10CntlineDfrmTimCntEntry ::= SEQUENCE { pmlma10CntlineDfrmTimCntIndex INTEGER, pmlma10CntlineDfrmTimCntValuePortn Counter32, pmlma10CntlineDfrmTimCntErrorPortn EkiOnOff, pmlma10CntlineDfrmTimCntOverloadPortn EkiOnOff } pmlma10CntlineDfrmTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10CntlineDfrmTimCnt table " ::= { pmlma10CntlineDfrmTimCntEntry 1 } pmlma10CntlineDfrmTimCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Timer Counter : " ::= { pmlma10CntlineDfrmTimCntEntry 2 } pmlma10CntlineDfrmTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pmlma10CntlineDfrmTimCntEntry 3 } pmlma10CntlineDfrmTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pmlma10CntlineDfrmTimCntEntry 4 } pmlma10CntCountersReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters Reset:This OID resets and restarts all the counters" ::= { pmlma10counters 259 } pmlma10CntCountersStop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters stop:This OID stops all the counters" ::= { pmlma10counters 260 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- RMON --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pmlma10MonupRmonBytesCounterClientInput articles --- ********************************************************* pmlma10MonupRmonBytesCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MonupRmonBytesCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MonupRmonBytesCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 16 } pmlma10MonupRmonBytesCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MonupRmonBytesCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MonupRmonBytesCounterClientInput table " INDEX { pmlma10MonupRmonBytesCounterClientInputIndex } ::= { pmlma10MonupRmonBytesCounterClientInputTable 1 } Pmlma10MonupRmonBytesCounterClientInputEntry ::= SEQUENCE { pmlma10MonupRmonBytesCounterClientInputIndex INTEGER, pmlma10MonupRmonBytesCounterClientInputValuePortn Counter64, pmlma10MonupRmonBytesCounterClientInputErrorPortn EkiOnOff, pmlma10MonupRmonBytesCounterClientInputOverloadPortn EkiOnOff } pmlma10MonupRmonBytesCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MonupRmonBytesCounterClientInput table " ::= { pmlma10MonupRmonBytesCounterClientInputEntry 1 } pmlma10MonupRmonBytesCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Bytes :This counter is increased each time a data byte is received on the client port This counter gives the number of bytes received on the client port " ::= { pmlma10MonupRmonBytesCounterClientInputEntry 2 } pmlma10MonupRmonBytesCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port " ::= { pmlma10MonupRmonBytesCounterClientInputEntry 3 } pmlma10MonupRmonBytesCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port " ::= { pmlma10MonupRmonBytesCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MonupRmonCrcErrorsCounterClientInput articles --- ********************************************************* pmlma10MonupRmonCrcErrorsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MonupRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MonupRmonCrcErrorsCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 32 } pmlma10MonupRmonCrcErrorsCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MonupRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MonupRmonCrcErrorsCounterClientInput table " INDEX { pmlma10MonupRmonCrcErrorsCounterClientInputIndex } ::= { pmlma10MonupRmonCrcErrorsCounterClientInputTable 1 } Pmlma10MonupRmonCrcErrorsCounterClientInputEntry ::= SEQUENCE { pmlma10MonupRmonCrcErrorsCounterClientInputIndex INTEGER, pmlma10MonupRmonCrcErrorsCounterClientInputValuePortn Counter64, pmlma10MonupRmonCrcErrorsCounterClientInputErrorPortn EkiOnOff, pmlma10MonupRmonCrcErrorsCounterClientInputOverloadPortn EkiOnOff } pmlma10MonupRmonCrcErrorsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MonupRmonCrcErrorsCounterClientInput table " ::= { pmlma10MonupRmonCrcErrorsCounterClientInputEntry 1 } pmlma10MonupRmonCrcErrorsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the client port This counter gives the number of B1/FCS Errors received on the client port " ::= { pmlma10MonupRmonCrcErrorsCounterClientInputEntry 2 } pmlma10MonupRmonCrcErrorsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port " ::= { pmlma10MonupRmonCrcErrorsCounterClientInputEntry 3 } pmlma10MonupRmonCrcErrorsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port " ::= { pmlma10MonupRmonCrcErrorsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MonupRmonPacketsCounterClientInput articles --- ********************************************************* pmlma10MonupRmonPacketsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MonupRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MonupRmonPacketsCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 48 } pmlma10MonupRmonPacketsCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MonupRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MonupRmonPacketsCounterClientInput table " INDEX { pmlma10MonupRmonPacketsCounterClientInputIndex } ::= { pmlma10MonupRmonPacketsCounterClientInputTable 1 } Pmlma10MonupRmonPacketsCounterClientInputEntry ::= SEQUENCE { pmlma10MonupRmonPacketsCounterClientInputIndex INTEGER, pmlma10MonupRmonPacketsCounterClientInputValuePortn Counter64, pmlma10MonupRmonPacketsCounterClientInputErrorPortn EkiOnOff, pmlma10MonupRmonPacketsCounterClientInputOverloadPortn EkiOnOff } pmlma10MonupRmonPacketsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MonupRmonPacketsCounterClientInput table " ::= { pmlma10MonupRmonPacketsCounterClientInputEntry 1 } pmlma10MonupRmonPacketsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Packets :This counter is increased each time a packet is received on the client port This counter gives the number of packets received on the client port " ::= { pmlma10MonupRmonPacketsCounterClientInputEntry 2 } pmlma10MonupRmonPacketsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port " ::= { pmlma10MonupRmonPacketsCounterClientInputEntry 3 } pmlma10MonupRmonPacketsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Overload :This OID when set indicates a Packets counter overload on client port " ::= { pmlma10MonupRmonPacketsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MonupRmonBroadcastCounterClientInput articles --- ********************************************************* pmlma10MonupRmonBroadcastCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MonupRmonBroadcastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MonupRmonBroadcastCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 64 } pmlma10MonupRmonBroadcastCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MonupRmonBroadcastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MonupRmonBroadcastCounterClientInput table " INDEX { pmlma10MonupRmonBroadcastCounterClientInputIndex } ::= { pmlma10MonupRmonBroadcastCounterClientInputTable 1 } Pmlma10MonupRmonBroadcastCounterClientInputEntry ::= SEQUENCE { pmlma10MonupRmonBroadcastCounterClientInputIndex INTEGER, pmlma10MonupRmonBroadcastCounterClientInputValuePortn Counter64, pmlma10MonupRmonBroadcastCounterClientInputErrorPortn EkiOnOff, pmlma10MonupRmonBroadcastCounterClientInputOverloadPortn EkiOnOff } pmlma10MonupRmonBroadcastCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MonupRmonBroadcastCounterClientInput table " ::= { pmlma10MonupRmonBroadcastCounterClientInputEntry 1 } pmlma10MonupRmonBroadcastCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port This counter gives the number of Broadcast packets received on the client port " ::= { pmlma10MonupRmonBroadcastCounterClientInputEntry 2 } pmlma10MonupRmonBroadcastCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port " ::= { pmlma10MonupRmonBroadcastCounterClientInputEntry 3 } pmlma10MonupRmonBroadcastCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port " ::= { pmlma10MonupRmonBroadcastCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MonupRmonMulticastCounterClientInput articles --- ********************************************************* pmlma10MonupRmonMulticastCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MonupRmonMulticastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MonupRmonMulticastCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 80 } pmlma10MonupRmonMulticastCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MonupRmonMulticastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MonupRmonMulticastCounterClientInput table " INDEX { pmlma10MonupRmonMulticastCounterClientInputIndex } ::= { pmlma10MonupRmonMulticastCounterClientInputTable 1 } Pmlma10MonupRmonMulticastCounterClientInputEntry ::= SEQUENCE { pmlma10MonupRmonMulticastCounterClientInputIndex INTEGER, pmlma10MonupRmonMulticastCounterClientInputValuePortn Counter64, pmlma10MonupRmonMulticastCounterClientInputErrorPortn EkiOnOff, pmlma10MonupRmonMulticastCounterClientInputOverloadPortn EkiOnOff } pmlma10MonupRmonMulticastCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MonupRmonMulticastCounterClientInput table " ::= { pmlma10MonupRmonMulticastCounterClientInputEntry 1 } pmlma10MonupRmonMulticastCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port This counter gives the number of Multicast packets received on the client port " ::= { pmlma10MonupRmonMulticastCounterClientInputEntry 2 } pmlma10MonupRmonMulticastCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port " ::= { pmlma10MonupRmonMulticastCounterClientInputEntry 3 } pmlma10MonupRmonMulticastCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port " ::= { pmlma10MonupRmonMulticastCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MonupRmonPauseFrameCounterClientInput articles --- ********************************************************* pmlma10MonupRmonPauseFrameCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MonupRmonPauseFrameCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MonupRmonPauseFrameCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 96 } pmlma10MonupRmonPauseFrameCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MonupRmonPauseFrameCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MonupRmonPauseFrameCounterClientInput table " INDEX { pmlma10MonupRmonPauseFrameCounterClientInputIndex } ::= { pmlma10MonupRmonPauseFrameCounterClientInputTable 1 } Pmlma10MonupRmonPauseFrameCounterClientInputEntry ::= SEQUENCE { pmlma10MonupRmonPauseFrameCounterClientInputIndex INTEGER, pmlma10MonupRmonPauseFrameCounterClientInputValuePortn Counter64, pmlma10MonupRmonPauseFrameCounterClientInputErrorPortn EkiOnOff, pmlma10MonupRmonPauseFrameCounterClientInputOverloadPortn EkiOnOff } pmlma10MonupRmonPauseFrameCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MonupRmonPauseFrameCounterClientInput table " ::= { pmlma10MonupRmonPauseFrameCounterClientInputEntry 1 } pmlma10MonupRmonPauseFrameCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port This counter gives the number of Pause frames received on the client port " ::= { pmlma10MonupRmonPauseFrameCounterClientInputEntry 2 } pmlma10MonupRmonPauseFrameCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port " ::= { pmlma10MonupRmonPauseFrameCounterClientInputEntry 3 } pmlma10MonupRmonPauseFrameCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pause Counter Overload :This OID when set indicates a Pause counter overload on client port " ::= { pmlma10MonupRmonPauseFrameCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MondwRmonCrcErrorsCounterClientInput articles --- ********************************************************* pmlma10MondwRmonCrcErrorsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MondwRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MondwRmonCrcErrorsCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 224 } pmlma10MondwRmonCrcErrorsCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MondwRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MondwRmonCrcErrorsCounterClientInput table " INDEX { pmlma10MondwRmonCrcErrorsCounterClientInputIndex } ::= { pmlma10MondwRmonCrcErrorsCounterClientInputTable 1 } Pmlma10MondwRmonCrcErrorsCounterClientInputEntry ::= SEQUENCE { pmlma10MondwRmonCrcErrorsCounterClientInputIndex INTEGER, pmlma10MondwRmonCrcErrorsCounterClientInputValuePortn Counter64, pmlma10MondwRmonCrcErrorsCounterClientInputErrorPortn EkiOnOff, pmlma10MondwRmonCrcErrorsCounterClientInputOverloadPortn EkiOnOff } pmlma10MondwRmonCrcErrorsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MondwRmonCrcErrorsCounterClientInput table " ::= { pmlma10MondwRmonCrcErrorsCounterClientInputEntry 1 } pmlma10MondwRmonCrcErrorsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the output client port This counter gives the number of B1/CRC Errors detected on the client port " ::= { pmlma10MondwRmonCrcErrorsCounterClientInputEntry 2 } pmlma10MondwRmonCrcErrorsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output B1/FCS Errors Counter Error :This OID when set indicates the output B1/FCS Errors counter value is invalid on client port " ::= { pmlma10MondwRmonCrcErrorsCounterClientInputEntry 3 } pmlma10MondwRmonCrcErrorsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output B1/FCS Errors Counter Overload :This OID when set indicates an output B1/FCS Errors counter overload on client port " ::= { pmlma10MondwRmonCrcErrorsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pmlma10MondwRmonPacketsCounterClientInput articles --- ********************************************************* pmlma10MondwRmonPacketsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MondwRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MondwRmonPacketsCounterClientInput Article " ::= { pmlma10MonClientRmonCounter 240 } pmlma10MondwRmonPacketsCounterClientInputEntry OBJECT-TYPE SYNTAX Pmlma10MondwRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MondwRmonPacketsCounterClientInput table " INDEX { pmlma10MondwRmonPacketsCounterClientInputIndex } ::= { pmlma10MondwRmonPacketsCounterClientInputTable 1 } Pmlma10MondwRmonPacketsCounterClientInputEntry ::= SEQUENCE { pmlma10MondwRmonPacketsCounterClientInputIndex INTEGER, pmlma10MondwRmonPacketsCounterClientInputValuePortn Counter64, pmlma10MondwRmonPacketsCounterClientInputErrorPortn EkiOnOff, pmlma10MondwRmonPacketsCounterClientInputOverloadPortn EkiOnOff } pmlma10MondwRmonPacketsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MondwRmonPacketsCounterClientInput table " ::= { pmlma10MondwRmonPacketsCounterClientInputEntry 1 } pmlma10MondwRmonPacketsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output Packets :This counter is increased each time a packet is transmitted on the client port. This counter gives the number of packets detected on the client port " ::= { pmlma10MondwRmonPacketsCounterClientInputEntry 2 } pmlma10MondwRmonPacketsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port " ::= { pmlma10MondwRmonPacketsCounterClientInputEntry 3 } pmlma10MondwRmonPacketsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port " ::= { pmlma10MondwRmonPacketsCounterClientInputEntry 4 } pmlma10MonCountersReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "RMON Counters Reset:This OID resets and restarts all the RMON counters" ::= { pmlma10MonRmon 359 } pmlma10MonCountersStop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "RMON Counters stop:This OID stops all the RMON counters" ::= { pmlma10MonRmon 360 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pmlma10MesrclientTemp articles --- ********************************************************* pmlma10MesrclientTempTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrclientTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrclientTemp Article " ::= { pmlma10MesrClient 16 } pmlma10MesrclientTempEntry OBJECT-TYPE SYNTAX Pmlma10MesrclientTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrclientTemp table " INDEX { pmlma10MesrclientTempIndex } ::= { pmlma10MesrclientTempTable 1 } Pmlma10MesrclientTempEntry ::= SEQUENCE { pmlma10MesrclientTempIndex INTEGER, pmlma10MesrclientTempPortn INTEGER } pmlma10MesrclientTempIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrclientTemp table " ::= { pmlma10MesrclientTempEntry 1 } pmlma10MesrclientTempPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the Laser temperature value of the Client Transceiver " ::= { pmlma10MesrclientTempEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrclientTxBias articles --- ********************************************************* pmlma10MesrclientTxBiasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrclientTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrclientTxBias Article " ::= { pmlma10MesrClient 32 } pmlma10MesrclientTxBiasEntry OBJECT-TYPE SYNTAX Pmlma10MesrclientTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrclientTxBias table " INDEX { pmlma10MesrclientTxBiasIndex } ::= { pmlma10MesrclientTxBiasTable 1 } Pmlma10MesrclientTxBiasEntry ::= SEQUENCE { pmlma10MesrclientTxBiasIndex INTEGER, pmlma10MesrclientTxBiasPortn INTEGER } pmlma10MesrclientTxBiasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrclientTxBias table " ::= { pmlma10MesrclientTxBiasEntry 1 } pmlma10MesrclientTxBiasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the Laser bias value of the Client Transceiver " ::= { pmlma10MesrclientTxBiasEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrclientTxPwr articles --- ********************************************************* pmlma10MesrclientTxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrclientTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrclientTxPwr Article " ::= { pmlma10MesrClient 48 } pmlma10MesrclientTxPwrEntry OBJECT-TYPE SYNTAX Pmlma10MesrclientTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrclientTxPwr table " INDEX { pmlma10MesrclientTxPwrIndex } ::= { pmlma10MesrclientTxPwrTable 1 } Pmlma10MesrclientTxPwrEntry ::= SEQUENCE { pmlma10MesrclientTxPwrIndex INTEGER, pmlma10MesrclientTxPwrPortn INTEGER } pmlma10MesrclientTxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrclientTxPwr table " ::= { pmlma10MesrclientTxPwrEntry 1 } pmlma10MesrclientTxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the transmit power value of the Client Transceiver " ::= { pmlma10MesrclientTxPwrEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrclientRxPwr articles --- ********************************************************* pmlma10MesrclientRxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrclientRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrclientRxPwr Article " ::= { pmlma10MesrClient 64 } pmlma10MesrclientRxPwrEntry OBJECT-TYPE SYNTAX Pmlma10MesrclientRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrclientRxPwr table " INDEX { pmlma10MesrclientRxPwrIndex } ::= { pmlma10MesrclientRxPwrTable 1 } Pmlma10MesrclientRxPwrEntry ::= SEQUENCE { pmlma10MesrclientRxPwrIndex INTEGER, pmlma10MesrclientRxPwrPortn INTEGER } pmlma10MesrclientRxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrclientRxPwr table " ::= { pmlma10MesrclientRxPwrEntry 1 } pmlma10MesrclientRxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the receive power value of the Client Transceiver " ::= { pmlma10MesrclientRxPwrEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrlineTxPwr articles --- ********************************************************* pmlma10MesrlineTxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrlineTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrlineTxPwr Article " ::= { pmlma10MesrLine 80 } pmlma10MesrlineTxPwrEntry OBJECT-TYPE SYNTAX Pmlma10MesrlineTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrlineTxPwr table " INDEX { pmlma10MesrlineTxPwrIndex } ::= { pmlma10MesrlineTxPwrTable 1 } Pmlma10MesrlineTxPwrEntry ::= SEQUENCE { pmlma10MesrlineTxPwrIndex INTEGER, pmlma10MesrlineTxPwrPortn INTEGER } pmlma10MesrlineTxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrlineTxPwr table " ::= { pmlma10MesrlineTxPwrEntry 1 } pmlma10MesrlineTxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the Tx Laser transmit power value of the Line Transceiver " ::= { pmlma10MesrlineTxPwrEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrlineTemp articles --- ********************************************************* pmlma10MesrlineTempTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrlineTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrlineTemp Article " ::= { pmlma10MesrLine 96 } pmlma10MesrlineTempEntry OBJECT-TYPE SYNTAX Pmlma10MesrlineTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrlineTemp table " INDEX { pmlma10MesrlineTempIndex } ::= { pmlma10MesrlineTempTable 1 } Pmlma10MesrlineTempEntry ::= SEQUENCE { pmlma10MesrlineTempIndex INTEGER, pmlma10MesrlineTempPortn INTEGER } pmlma10MesrlineTempIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrlineTemp table " ::= { pmlma10MesrlineTempEntry 1 } pmlma10MesrlineTempPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the Tx Laser Temperature value of the Line Transceiver " ::= { pmlma10MesrlineTempEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrlineTxBias articles --- ********************************************************* pmlma10MesrlineTxBiasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrlineTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrlineTxBias Article " ::= { pmlma10MesrLine 112 } pmlma10MesrlineTxBiasEntry OBJECT-TYPE SYNTAX Pmlma10MesrlineTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrlineTxBias table " INDEX { pmlma10MesrlineTxBiasIndex } ::= { pmlma10MesrlineTxBiasTable 1 } Pmlma10MesrlineTxBiasEntry ::= SEQUENCE { pmlma10MesrlineTxBiasIndex INTEGER, pmlma10MesrlineTxBiasPortn INTEGER } pmlma10MesrlineTxBiasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrlineTxBias table " ::= { pmlma10MesrlineTxBiasEntry 1 } pmlma10MesrlineTxBiasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the Tx Laser Bias value of the Line Transceiver " ::= { pmlma10MesrlineTxBiasEntry 2 } --- ********************************************************* --- TABLE for the pmlma10MesrlineRxPwr articles --- ********************************************************* pmlma10MesrlineRxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10MesrlineRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmlma10MesrlineRxPwr Article " ::= { pmlma10MesrLine 128 } pmlma10MesrlineRxPwrEntry OBJECT-TYPE SYNTAX Pmlma10MesrlineRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmlma10MesrlineRxPwr table " INDEX { pmlma10MesrlineRxPwrIndex } ::= { pmlma10MesrlineRxPwrTable 1 } Pmlma10MesrlineRxPwrEntry ::= SEQUENCE { pmlma10MesrlineRxPwrIndex INTEGER, pmlma10MesrlineRxPwrPortn INTEGER } pmlma10MesrlineRxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmlma10MesrlineRxPwr table " ::= { pmlma10MesrlineRxPwrEntry 1 } pmlma10MesrlineRxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the Receive power value of the Line Transceiver " ::= { pmlma10MesrlineRxPwrEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- DOWNLOAD --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the restartProcess article --- ***************************************************** pmlma10DwlrestartProcess OBJECT IDENTIFIER ::= { pmlma10DwlOther 0 } pmlma10DwlColdRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Cold Restart :This OID indicates that the module last restart was a Cold RESTART " ::= { pmlma10DwlrestartProcess 2 } pmlma10DwlWarmRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warm Restart :This OID indicates that the module last restart was a Warm RESTART " ::= { pmlma10DwlrestartProcess 1 } --- ***************************************************** --- LEAF for the swBanksUsed article --- ***************************************************** pmlma10DwlswBanksUsed OBJECT IDENTIFIER ::= { pmlma10DwlOther 1 } pmlma10DwlSwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 This status indicates if the SW bank 2 contains SW package " ::= { pmlma10DwlswBanksUsed 6 } pmlma10DwlSwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 This status indicates if the SW bank 1 contains SW package " ::= { pmlma10DwlswBanksUsed 5 } pmlma10DwlSwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 active :This OID indicates the module is working on SW bank 2 This status indicates if the SW bank 2 is active or standby " ::= { pmlma10DwlswBanksUsed 2 } pmlma10DwlSwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 active :This OID indicates the module is working on SW bank 1 This status indicates if the SW bank 1 is active or standby " ::= { pmlma10DwlswBanksUsed 1 } --- ***************************************************** --- LEAF for the gwBanksUsed article --- ***************************************************** pmlma10DwlgwBanksUsed OBJECT IDENTIFIER ::= { pmlma10DwlOther 2 } pmlma10DwlGwBank4Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 " ::= { pmlma10DwlgwBanksUsed 8 } pmlma10DwlGwBank3Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 This status indicates if the GW bank 3 contains GW package " ::= { pmlma10DwlgwBanksUsed 7 } pmlma10DwlGwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 " ::= { pmlma10DwlgwBanksUsed 6 } pmlma10DwlGwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 This status indicates if the GW bank 1 contains GW package " ::= { pmlma10DwlgwBanksUsed 5 } pmlma10DwlGwBank4Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 active :This OID indicates the module is working on GW bank 4 " ::= { pmlma10DwlgwBanksUsed 4 } pmlma10DwlGwBank3Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 active :This OID indicates the module is working on GW bank 3 This status indicates if the GW bank 3 is active or standby " ::= { pmlma10DwlgwBanksUsed 3 } pmlma10DwlGwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 active :This OID indicates the module is working on GW bank 2 " ::= { pmlma10DwlgwBanksUsed 2 } pmlma10DwlGwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 active :This OID indicates the module is working on GW bank 1 This status indicates if the GW bank 1 is active or standby " ::= { pmlma10DwlgwBanksUsed 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group accessCAisCsf --- ***************************************************** pmlma10CfgAccessCAisCsf OBJECT IDENTIFIER ::= { pmlma10Config 1 } --- ***************************************************** --- LEAF for the table 0012 --- ***************************************************** pmlma10CfgClientcaiscsfTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgAccessCAisCsf 1 } pmlma10CfgClientcaiscsfEntry OBJECT-TYPE SYNTAX Pmlma10CfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the accessCAisCsf table " INDEX { pmlma10CfgClientcaiscsfIndex } ::= { pmlma10CfgClientcaiscsfTable 1 } Pmlma10CfgClientcaiscsfEntry ::= SEQUENCE { pmlma10CfgClientcaiscsfIndex INTEGER, pmlma10CfgReservePortn Unsigned32 } pmlma10CfgClientcaiscsfIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientcaiscsf table " ::= { pmlma10CfgClientcaiscsfEntry 1 } pmlma10CfgReservePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition " ::= { pmlma10CfgClientcaiscsfEntry 3 } --- ***************************************************** --- LEAF for the table Group startup --- ***************************************************** pmlma10CfgStartup OBJECT IDENTIFIER ::= { pmlma10Config 2 } --- ***************************************************** --- LEAF for the table 2110 --- ***************************************************** pmlma10CfgClientStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgStartup 1 } pmlma10CfgClientStartupEntry OBJECT-TYPE SYNTAX Pmlma10CfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pmlma10CfgClientStartupIndex } ::= { pmlma10CfgClientStartupTable 1 } Pmlma10CfgClientStartupEntry ::= SEQUENCE { pmlma10CfgClientStartupIndex INTEGER, pmlma10CfgSystConfPortPortn Unsigned32, pmlma10CfgNetConfPortPortn Unsigned32, pmlma10CfgOptionsPortPortn Unsigned32 } pmlma10CfgClientStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientStartup table " ::= { pmlma10CfgClientStartupEntry 1 } pmlma10CfgSystConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pmlma10CfgClientStartupEntry 3 } pmlma10CfgNetConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pmlma10CfgClientStartupEntry 4 } pmlma10CfgOptionsPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Client Port :This register configures the default options on the port. " ::= { pmlma10CfgClientStartupEntry 14 } --- ***************************************************** --- LEAF for the table 2190 --- ***************************************************** pmlma10CfgLinexr1StartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgLinexr1StartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgStartup 2 } pmlma10CfgLinexr1StartupEntry OBJECT-TYPE SYNTAX Pmlma10CfgLinexr1StartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pmlma10CfgLinexr1StartupIndex } ::= { pmlma10CfgLinexr1StartupTable 1 } Pmlma10CfgLinexr1StartupEntry ::= SEQUENCE { pmlma10CfgLinexr1StartupIndex INTEGER, pmlma10CfgSystConfLinePortn Unsigned32, pmlma10CfgOptionsLinePortn Unsigned32 } pmlma10CfgLinexr1StartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the linexr1Startup table " ::= { pmlma10CfgLinexr1StartupEntry 1 } pmlma10CfgSystConfLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line :This register configures the default initialisation settings on Line " ::= { pmlma10CfgLinexr1StartupEntry 3 } pmlma10CfgOptionsLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Line :This register configures the default options on the line " ::= { pmlma10CfgLinexr1StartupEntry 14 } --- ***************************************************** --- LEAF for the table 21AB --- ***************************************************** pmlma10CfgEmptyTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgEmptyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgStartup 3 } pmlma10CfgEmptyEntry OBJECT-TYPE SYNTAX Pmlma10CfgEmptyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pmlma10CfgEmptyIndex } ::= { pmlma10CfgEmptyTable 1 } Pmlma10CfgEmptyEntry ::= SEQUENCE { pmlma10CfgEmptyIndex INTEGER, pmlma10CfgSystConfMsaLinePortn Unsigned32 } pmlma10CfgEmptyIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the empty table " ::= { pmlma10CfgEmptyEntry 1 } pmlma10CfgSystConfMsaLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on MSA :This register configures the default initialisation settings on MSA " ::= { pmlma10CfgEmptyEntry 3 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pmlma10CfgLabels OBJECT IDENTIFIER ::= { pmlma10Config 3 } --- ***************************************************** --- LEAF for the table 0003 --- ***************************************************** pmlma10CfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgLabels 1 } pmlma10CfgLabelclientEntry OBJECT-TYPE SYNTAX Pmlma10CfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pmlma10CfgLabelclientIndex } ::= { pmlma10CfgLabelclientTable 1 } Pmlma10CfgLabelclientEntry ::= SEQUENCE { pmlma10CfgLabelclientIndex INTEGER, pmlma10CfgLabelclientPortn DisplayString } pmlma10CfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pmlma10CfgLabelclientEntry 1 } pmlma10CfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pmlma10CfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table 0004 --- ***************************************************** pmlma10CfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgLabels 2 } pmlma10CfgLabellineEntry OBJECT-TYPE SYNTAX Pmlma10CfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pmlma10CfgLabellineIndex } ::= { pmlma10CfgLabellineTable 1 } Pmlma10CfgLabellineEntry ::= SEQUENCE { pmlma10CfgLabellineIndex INTEGER, pmlma10CfgLabellinePortn DisplayString } pmlma10CfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pmlma10CfgLabellineEntry 1 } pmlma10CfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pmlma10CfgLabellineEntry 3 } --- ***************************************************** --- LEAF for the table Group startuptlh --- ***************************************************** pmlma10CfgStartuptlh OBJECT IDENTIFIER ::= { pmlma10Config 4 } --- ***************************************************** --- LEAF for the table 2710 --- ***************************************************** pmlma10CfgOtxtlhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgStartuptlh 1 } pmlma10CfgOtxtlhEntry OBJECT-TYPE SYNTAX Pmlma10CfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptlh table " INDEX { pmlma10CfgOtxtlhIndex } ::= { pmlma10CfgOtxtlhTable 1 } Pmlma10CfgOtxtlhEntry ::= SEQUENCE { pmlma10CfgOtxtlhIndex INTEGER, pmlma10CfgLinePwrLaserPortn Unsigned32, pmlma10CfgLineFCurrentPortn Unsigned32, pmlma10CfgLineGridCurrentPortn Unsigned32, pmlma10CfgFPortn Unsigned32, pmlma10CfgRxLineFCurrentPortn Unsigned32 } pmlma10CfgOtxtlhIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlh table " ::= { pmlma10CfgOtxtlhEntry 1 } pmlma10CfgLinePwrLaserPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) " ::= { pmlma10CfgOtxtlhEntry 6 } pmlma10CfgLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver " ::= { pmlma10CfgOtxtlhEntry 7 } pmlma10CfgLineGridCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver " ::= { pmlma10CfgOtxtlhEntry 8 } pmlma10CfgFPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver " ::= { pmlma10CfgOtxtlhEntry 9 } pmlma10CfgRxLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver " ::= { pmlma10CfgOtxtlhEntry 10 } --- ***************************************************** --- LEAF for the table Group other --- ***************************************************** pmlma10CfgOther OBJECT IDENTIFIER ::= { pmlma10Config 5 } --- ***************************************************** --- LEAF for the table 2300 --- ***************************************************** pmlma10tablemoduleOther OBJECT IDENTIFIER ::= { pmlma10CfgOther 1 } pmlma10Cfgmode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the configuration mode of the module " ::= { pmlma10tablemoduleOther 2 } --- ***************************************************** --- LEAF for the table Group startuptablefive --- ***************************************************** pmlma10CfgStartuptablefive OBJECT IDENTIFIER ::= { pmlma10Config 6 } --- ***************************************************** --- LEAF for the table 0005 --- ***************************************************** pmlma10CfgOtxtlhcapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmlma10CfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmlma10CfgStartuptablefive 1 } pmlma10CfgOtxtlhcapabilitiesEntry OBJECT-TYPE SYNTAX Pmlma10CfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptablefive table " INDEX { pmlma10CfgOtxtlhcapabilitiesIndex } ::= { pmlma10CfgOtxtlhcapabilitiesTable 1 } Pmlma10CfgOtxtlhcapabilitiesEntry ::= SEQUENCE { pmlma10CfgOtxtlhcapabilitiesIndex INTEGER, pmlma10CfgComponentTypePortn Unsigned32, pmlma10CfgMiscellaneousPortn Unsigned32, pmlma10CfgFirstChannelPortn Unsigned32, pmlma10CfgLastChannelPortn Unsigned32, pmlma10CfgGridPortn Unsigned32 } pmlma10CfgOtxtlhcapabilitiesIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlhcapabilities table " ::= { pmlma10CfgOtxtlhcapabilitiesEntry 1 } pmlma10CfgComponentTypePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Component parameters :This OID defines the component parameters " ::= { pmlma10CfgOtxtlhcapabilitiesEntry 3 } pmlma10CfgMiscellaneousPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Miscellaneous default settings :This OID defines the miscellaneous parameters " ::= { pmlma10CfgOtxtlhcapabilitiesEntry 4 } pmlma10CfgFirstChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the first channel of the component :This OID defines the first channel number of the PM " ::= { pmlma10CfgOtxtlhcapabilitiesEntry 5 } pmlma10CfgLastChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the last channel of the component :This OID defines the last channel number of the PM " ::= { pmlma10CfgOtxtlhcapabilitiesEntry 6 } pmlma10CfgGridPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Grid value of the component :This OID defines the grid of the PM " ::= { pmlma10CfgOtxtlhcapabilitiesEntry 7 } pmlma10CfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pmlma10Config 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pmlma10trapPortNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last port which generates a trap" ::= { pmlma10traps 2 } pmlma10trapLineNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Line which generates a trap" ::= { pmlma10traps 3 } pmlma10trapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pmlma10traps 4 } --- ***************************************************** --- LINE TRAPS --- ***************************************************** pmlma10LineTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmLineDdmWarningPortn, pmlma10trapLineNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Line Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pmlma10AlmLineDdmWarningPortn "on", pmlma10trapLineNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Warning appears on Line Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Not urgent Line default is activated" ::= { pmlma10traps 30 } pmlma10LineTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmLineDdmWarningPortn, pmlma10trapLineNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Line Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PMLMA10 Line Not Urgent ON" } --&MATCH { pmlma10AlmLineDdmWarningPortn "on", pmlma10trapLineNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Warning disappears on Line Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Not urgent Line default disappeared" ::= { pmlma10traps 31 } pmlma10LineTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmLineDdmAlmPortn, pmlma10trapLineNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Line Urgent ON" --&ACTIONS { log, major } --&MATCH { pmlma10AlmLineDdmAlmPortn "on", pmlma10trapLineNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Alarm appears on Line Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Urgent Line default is activated" ::= { pmlma10traps 32 } pmlma10LineTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmLineDdmAlmPortn, pmlma10trapLineNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Line Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PMLMA10 Line Urgent ON" } --&MATCH { pmlma10AlmLineDdmAlmPortn "on", pmlma10trapLineNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Line Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Urgent Line default disappeared" ::= { pmlma10traps 33 } pmlma10LineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmLineFailPortn , pmlma10AlmLineHwFailPortn , pmlma10trapLineNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Line Fail ON" --&ACTIONS { log, critical } --&MATCH { pmlma10AlmLineFailPortn "on", pmlma10AlmLineHwFailPortn "*", pmlma10trapLineNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Line Port $3 Down on PMLMA10 in Slot $4 ($A)" --&FILTNAME "PMLMA10 Line HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pmlma10AlmLineFailPortn "*", pmlma10AlmLineHwFailPortn "on", pmlma10trapLineNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Line Port $3 Down on PMLMA10 in Slot $4 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pmlma10traps 34 } pmlma10LineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmLineFailPortn , pmlma10AlmLineHwFailPortn , pmlma10trapLineNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Line Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PMLMA10 Line Fail ON" } --&MATCH { pmlma10AlmLineFailPortn "on", pmlma10AlmLineHwFailPortn "*", pmlma10trapLineNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Line Port $3 Up on PMLMA10 in Slot $4 ($A)" --&FILTNAME "PMLMA10 Line HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pmlma10AlmLineFailPortn "*", pmlma10AlmLineHwFailPortn "on", pmlma10trapLineNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Line Port $3 Up on PMLMA10 in Slot $4 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pmlma10traps 35 } --- ***************************************************** --- CLIENT TRAPS --- ***************************************************** pmlma10ClientTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmSfpDdmWarningPortn, pmlma10trapPortNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Client Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pmlma10AlmSfpDdmWarningPortn "on", pmlma10trapPortNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Not urgent client default is activated" ::= { pmlma10traps 40 } pmlma10ClientTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmSfpDdmWarningPortn, pmlma10trapPortNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Client Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PMLMA10 Client Not Urgent ON" } --&MATCH { pmlma10AlmSfpDdmWarningPortn "on", pmlma10trapPortNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Not urgent client default disappeared" ::= { pmlma10traps 41 } pmlma10ClientTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmSfpDdmAlmPortn, pmlma10trapPortNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Client Urgent ON" --&ACTIONS { log, major } --&MATCH { pmlma10AlmSfpDdmAlmPortn "on", pmlma10trapPortNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Alarm appears on Client Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Urgent client default is activated" ::= { pmlma10traps 42 } pmlma10ClientTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmSfpDdmAlmPortn, pmlma10trapPortNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Client Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PMLMA10 Client Urgent ON" } --&MATCH { pmlma10AlmSfpDdmAlmPortn "on", pmlma10trapPortNumber "$2", pmlma10trapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Client Port $2 of PMLMA10 in Slot $3 ($A)" DESCRIPTION "Urgent client default disappeared" ::= { pmlma10traps 43 } pmlma10ClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmFailAccPortn, pmlma10AlmHwFailAccPortn, pmlma10trapPortNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Client Fail ON" --&ACTIONS { log, critical } --&MATCH { pmlma10AlmFailAccPortn "on", pmlma10AlmHwFailAccPortn "*", pmlma10trapPortNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Client Port $3 Down on PMLMA10 in Slot $4 ($A)" --&FILTNAME "PMLMA10 Client HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pmlma10AlmFailAccPortn "*", pmlma10AlmHwFailAccPortn "on", pmlma10trapPortNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Client Port $3 Down on PMLMA10 in Slot $4 ($A)" DESCRIPTION "Critical client default is activated" ::= { pmlma10traps 44 } pmlma10ClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmFailAccPortn, pmlma10AlmHwFailAccPortn, pmlma10trapPortNumber, pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Client Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PMLMA10 Client Fail ON" } --&MATCH { pmlma10AlmFailAccPortn "on", pmlma10AlmHwFailAccPortn "*", pmlma10trapPortNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Client Port $3 Up on PMLMA10 in Slot $4 ($A)" --&FILTNAME "PMLMA10 Client HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pmlma10AlmFailAccPortn "*", pmlma10AlmHwFailAccPortn "on", pmlma10trapPortNumber "$3", pmlma10trapBoardNumber "$4"} --&MESG "Client Port $3 Up on PMLMA10 in Slot $4 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pmlma10traps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pmlma10PowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmlma10AlmDefFuseB, pmlma10AlmDefFuseA , pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pmlma10AlmDefFuseB "*", pmlma10AlmDefFuseA "on", pmlma10trapBoardNumber "$3"} --&MESG "Power Input A Fail on PMLMA10 in Slot $3 ($A)" --&FILTNAME "PMLMA10 Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pmlma10AlmDefFuseB "on", pmlma10AlmDefFuseA "*", pmlma10trapBoardNumber "$3"} --&MESG "Power Input B Fail on PMLMA10 in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pmlma10traps 50 } pmlma10PowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmlma10AlmDefFuseB, pmlma10AlmDefFuseA , pmlma10trapBoardNumber} STATUS current --&FILTNAME "PMLMA10 Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PMLMA10 Fuse A Fail ON", "PMLMA10 Fuse B Fail ON" } --&MATCH { pmlma10AlmDefFuseB "on", pmlma10AlmDefFuseA "on", pmlma10trapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PMLMA10 in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pmlma10traps 51 } END