-- ***************************************************************** -- EKINOPS-Pm1004VDC.TXT: MIB -- --MIB Part Number:3MI00019AAAD --MIB Version:02 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pm1004VDC-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulePm1004vdc MODULE-IDENTITY LAST-UPDATED "201606020000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 11, rue Louis de Broglie F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.net" DESCRIPTION "MIB for managing Ekinops modules with PM1004vdc software" REVISION "200803110000Z" DESCRIPTION "Initial Version." REVISION "200808180000Z" DESCRIPTION "Labels modifications." REVISION "200812020000Z" DESCRIPTION "DCC Storm suppress" REVISION "200812080000Z" DESCRIPTION "Client Signal Shutdown label" REVISION "200905260000Z" DESCRIPTION "Client OOS TX and RX insertion" REVISION "200907220000Z" DESCRIPTION "Add DCC and MAINTENANCE control" REVISION "200909020000Z" DESCRIPTION "Some Labels updates" REVISION "200910270000Z" DESCRIPTION "Add LossOfSync as alarm Line" REVISION "201003030000Z" DESCRIPTION "Probcause,AlarmType - NMS" REVISION "201102040000Z" DESCRIPTION "Formulas in comments and Event on XFP init" REVISION "201104290000Z" DESCRIPTION "OTX-TLH features insertion" REVISION "201203080000Z" DESCRIPTION "OTX-TLH features insertion" REVISION "201403280000Z" DESCRIPTION "Probcause,AlarmType - NMS completion" REVISION "201412230000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201605200000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" REVISION "201606020000Z" DESCRIPTION "Capabilities objects of Table 5" ::= { ekinops 38 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pm1004vdcalarms OBJECT IDENTIFIER ::= { modulePm1004vdc 2 } pm1004vdcAlmOther OBJECT IDENTIFIER ::= { pm1004vdcalarms 1 } pm1004vdcAlmOtherNurg OBJECT IDENTIFIER ::= { pm1004vdcAlmOther 1 } pm1004vdcAlmOtherUrg OBJECT IDENTIFIER ::= { pm1004vdcAlmOther 2 } pm1004vdcAlmOtherCrit OBJECT IDENTIFIER ::= { pm1004vdcAlmOther 3 } pm1004vdcAlmClient OBJECT IDENTIFIER ::= { pm1004vdcalarms 2 } pm1004vdcAlmClientNurg OBJECT IDENTIFIER ::= { pm1004vdcAlmClient 1 } pm1004vdcAlmClientUrg OBJECT IDENTIFIER ::= { pm1004vdcAlmClient 2 } pm1004vdcAlmClientCrit OBJECT IDENTIFIER ::= { pm1004vdcAlmClient 3 } pm1004vdcAlmLine OBJECT IDENTIFIER ::= { pm1004vdcalarms 3 } pm1004vdcAlmLineNurg OBJECT IDENTIFIER ::= { pm1004vdcAlmLine 1 } pm1004vdcAlmLineUrg OBJECT IDENTIFIER ::= { pm1004vdcAlmLine 2 } pm1004vdcAlmLineCrit OBJECT IDENTIFIER ::= { pm1004vdcAlmLine 3 } pm1004vdcmeasures OBJECT IDENTIFIER ::= { modulePm1004vdc 3 } pm1004vdcMesrOther OBJECT IDENTIFIER ::= { pm1004vdcmeasures 1 } pm1004vdcMesrClient OBJECT IDENTIFIER ::= { pm1004vdcmeasures 2 } pm1004vdcMesrLine OBJECT IDENTIFIER ::= { pm1004vdcmeasures 3 } pm1004vdccounters OBJECT IDENTIFIER ::= { modulePm1004vdc 4 } pm1004vdcCntOther OBJECT IDENTIFIER ::= { pm1004vdccounters 1 } pm1004vdcCntClient OBJECT IDENTIFIER ::= { pm1004vdccounters 2 } pm1004vdcCntLine OBJECT IDENTIFIER ::= { pm1004vdccounters 3 } pm1004vdccontrolsWrite OBJECT IDENTIFIER ::= { modulePm1004vdc 6 } pm1004vdcCtrlOther OBJECT IDENTIFIER ::= { pm1004vdccontrolsWrite 1 } pm1004vdcCtrlClient OBJECT IDENTIFIER ::= { pm1004vdccontrolsWrite 2 } pm1004vdcCtrlLine OBJECT IDENTIFIER ::= { pm1004vdccontrolsWrite 3 } pm1004vdcri OBJECT IDENTIFIER ::= { modulePm1004vdc 7 } pm1004vdcriTable OBJECT IDENTIFIER ::= { pm1004vdcri 1 } pm1004vdcdownload OBJECT IDENTIFIER ::= { modulePm1004vdc 8 } pm1004vdcDwlOther OBJECT IDENTIFIER ::= { pm1004vdcdownload 1 } pm1004vdcDwlClient OBJECT IDENTIFIER ::= { pm1004vdcdownload 2 } pm1004vdcDwlLine OBJECT IDENTIFIER ::= { pm1004vdcdownload 3 } pm1004vdcConfig OBJECT IDENTIFIER ::= { modulePm1004vdc 9 } pm1004vdctraps OBJECT IDENTIFIER ::= { modulePm1004vdc 10 } pm1004vdcMonitoring OBJECT IDENTIFIER ::= { modulePm1004vdc 11} pm1004vdcMonOther OBJECT IDENTIFIER ::= { pm1004vdcMonitoring 1 } pm1004vdcMonRmon OBJECT IDENTIFIER ::= { pm1004vdcMonOther 3 } pm1004vdcMonClient OBJECT IDENTIFIER ::= { pm1004vdcMonitoring 2 } pm1004vdcMonClientRmonCounter OBJECT IDENTIFIER ::= { pm1004vdcMonClient 4 } pm1004vdcMonLine OBJECT IDENTIFIER ::= { pm1004vdcMonitoring 3 } pm1004vdcMonLineRmonCounter OBJECT IDENTIFIER ::= { pm1004vdcMonLine 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** Pm1004vdcModeTimeSlot ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different mode for time slot" SYNTAX INTEGER { singleSplitSelect(256) } Pm1004vdcModeAddDrop ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different mode for client" SYNTAX INTEGER { singleSplitSelect(256) } Pm1004vdcProtectionTimeSlot ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "protection for control" SYNTAX INTEGER { auto(0), manualX2Line2(257), manualX1Line1(513) } Pm1004vdcProtectionStartUp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "protection for startup" SYNTAX INTEGER { auto(2), manualX2Line2(0), manualX1Line1(1) } Pm1004vdcDccMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Mode for DCC" SYNTAX INTEGER { dccNo(0), dcctermLine1(1), dcctermLine2(2), dcctermLines12(3), dccmaster(4), dccslaveLine12(7) } Pm1004vdcClientOosMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Mode for OOS on client ports" SYNTAX INTEGER { clientportis(0), clienttxoos(1), clientrxoos(2), clientportoos(3) } Pm1004vdcOtxMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OTX-TLH on client and line ports" SYNTAX INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } Pm1004vdcOtxGrid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different grids on OTX-TLH on client and line ports" SYNTAX INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } Pm1004vdcAdjustValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values in Adjust mode on OTX-TLH on client and line ports" SYNTAX INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } Pm1004vdcOtxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on OTX-TLH on client and line ports" SYNTAX INTEGER --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm1004vdcRinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pm1004vdcri 2 } pm1004vdcRinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pm1004vdcri 3 } pm1004vdcRinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pm1004vdcri 4 } pm1004vdcRinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pm1004vdcri 5 } pm1004vdcRinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform desciption: This OID contains the description of the Gateware platform." ::= { pm1004vdcri 6 } pm1004vdcRinvSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pm1004vdcriTable 1 } pm1004vdcRinvSfpEntry OBJECT-TYPE SYNTAX Pm1004vdcRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the SFP table" INDEX { pm1004vdcRinvSfpIndex } ::= { pm1004vdcRinvSfpTable 1 } Pm1004vdcRinvSfpEntry::= SEQUENCE { pm1004vdcRinvSfpIndex Integer32, pm1004vdcRinvsfp DisplayString } pm1004vdcRinvSfpIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for SFP table" ::= { pm1004vdcRinvSfpEntry 1 } pm1004vdcRinvsfp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the SFP" ::= { pm1004vdcRinvSfpEntry 2 } pm1004vdcRinvLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the XFPs on the selected module" ::= { pm1004vdcriTable 2 } pm1004vdcRinvLineEntry OBJECT-TYPE SYNTAX Pm1004vdcRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the XFP table" INDEX { pm1004vdcRinvLineIndex } ::= { pm1004vdcRinvLineTable 1 } Pm1004vdcRinvLineEntry::= SEQUENCE { pm1004vdcRinvLineIndex Integer32, pm1004vdcRinvxfpLine DisplayString } pm1004vdcRinvLineIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for XFP table" ::= { pm1004vdcRinvLineEntry 1 } pm1004vdcRinvxfpLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the XFP: This OID contains the inventory for the XFP" ::= { pm1004vdcRinvLineEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pm1004vdcAlmsynthAlm0 OBJECT IDENTIFIER ::= { pm1004vdcAlmOtherCrit 0 } pm1004vdcAlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsynthAlm0 16 } pm1004vdcAlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsynthAlm0 15 } pm1004vdcAlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the PM MOD_GLOB_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlm0 9 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pm1004vdcAlmsynthAlm2 OBJECT IDENTIFIER ::= { pm1004vdcAlmOtherNurg 2 } pm1004vdcAlmMaintenanceOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Maintenance Mode :This OID indicates that the PM is in maintenance mode. This alarm indicates that the maintenance mode is enabled on the PM MAINTENANCE_ON other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlm2 5 } pm1004vdcAlmCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Not Used :This OID, when set, indicates that alarm correlation is not being performed. CORRELAT_OFF other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlm2 4 } pm1004vdcAlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlm2 3 } pm1004vdcAlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlm2 2 } pm1004vdcAlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlm2 1 } --- ********************************************************* --- TABLE for the pm1004vdcAlmsynthAlmLine articles --- ********************************************************* pm1004vdcAlmsynthAlmLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmsynthAlmLine Article " ::= { pm1004vdcAlmLineCrit 7 } pm1004vdcAlmsynthAlmLineEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmsynthAlmLine table " INDEX { pm1004vdcAlmsynthAlmLineIndex } ::= { pm1004vdcAlmsynthAlmLineTable 1 } Pm1004vdcAlmsynthAlmLineEntry ::= SEQUENCE { pm1004vdcAlmsynthAlmLineIndex INTEGER, pm1004vdcAlmLineActivePortn EkiOnOff, pm1004vdcAlmLineFailPortn EkiOnOff, pm1004vdcAlmLineDdmCritPortn EkiOnOff, pm1004vdcAlmLineDdmAlmPortn EkiOnOff, pm1004vdcAlmLineDdmWarningPortn EkiOnOff, pm1004vdcAlmLineLocalOosPortn EkiOnOff, pm1004vdcAlmXfpTxOffPortn EkiOnOff, pm1004vdcAlmLineHwFailPortn EkiOnOff, pm1004vdcAlmXfpInitNotComplPortn EkiOnOff, pm1004vdcAlmXfpAbsentPortn EkiOnOff } pm1004vdcAlmsynthAlmLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmsynthAlmLine table " ::= { pm1004vdcAlmsynthAlmLineEntry 1 } pm1004vdcAlmLineActivePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Active :This bit indicates the line #n is active on receive side This status indicates whether the line is active or standby. LINE_ACTIVE informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 17 } pm1004vdcAlmLineFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port LINE_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 13 } pm1004vdcAlmLineDdmCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Custom Alarm On Line XFP/OTX DDM :This OID indicates a Custom alarm is present coming out of Line optical interface DDM This alarm indicates if a DDM Custom Alarm has been detected on the line transceiver LINE_DDM_CRIT equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 12 } pm1004vdcAlmLineDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM This alarm indicates if a DDM Alarm has been detected on the line transceiver LINE_DDM_ALM equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 11 } pm1004vdcAlmLineDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM This alarm indicates if a DDM Warning has been detected on the line transceiver LINE_DDM_WARNING equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 10 } pm1004vdcAlmLineLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) This status indicates if the line port is in service LINE_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 7 } pm1004vdcAlmXfpTxOffPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on This status indicates if the line transceiver laser is ON or OFF XFP_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 6 } pm1004vdcAlmLineHwFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmLineEntry 5 } pm1004vdcAlmXfpInitNotComplPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. This status indicates if the line transceiver has been correctly initialized XFP_INIT_NOT_COMPL equipmentMalfunction (16) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm1004vdcAlmsynthAlmLineEntry 3 } pm1004vdcAlmXfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. This alarm indicates if the line transceiver is present. XFP_ABSENT inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm1004vdcAlmsynthAlmLineEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmsynthAlmPort articles --- ********************************************************* pm1004vdcAlmsynthAlmPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmsynthAlmPort Article " ::= { pm1004vdcAlmClientCrit 8 } pm1004vdcAlmsynthAlmPortEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmsynthAlmPort table " INDEX { pm1004vdcAlmsynthAlmPortIndex } ::= { pm1004vdcAlmsynthAlmPortTable 1 } Pm1004vdcAlmsynthAlmPortEntry ::= SEQUENCE { pm1004vdcAlmsynthAlmPortIndex INTEGER, pm1004vdcAlmUpCsfPortn EkiOnOff, pm1004vdcAlmClientActivePortn EkiOnOff, pm1004vdcAlmFailAccPortn EkiOnOff, pm1004vdcAlmSfpDdmCritPortn EkiOnOff, pm1004vdcAlmSfpDdmAlmPortn EkiOnOff, pm1004vdcAlmSfpDdmWarningPortn EkiOnOff, pm1004vdcAlmDwCaisPortn EkiOnOff, pm1004vdcAlmClientLocalOosRxPortn EkiOnOff, pm1004vdcAlmClientLocalOosTxPortn EkiOnOff, pm1004vdcAlmDwLsdPortn EkiOnOff, pm1004vdcAlmHwFailAccPortn EkiOnOff, pm1004vdcAlmDdmAbsentPortn EkiOnOff, pm1004vdcAlmSfpAbsentPortn EkiOnOff } pm1004vdcAlmsynthAlmPortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmsynthAlmPort table " ::= { pm1004vdcAlmsynthAlmPortEntry 1 } pm1004vdcAlmUpCsfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. This status indicates if a Client Signal Fail is currently inserted on the line signal for this client port UP_CSF_1 other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 17 } pm1004vdcAlmClientActivePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Sink (Line1 Or Line2) :This bit indicates the Client #n is active on receive side This status indicates whether the Client is extracted from Line 1 or Line 2. CLIENT_ACTIVE other (1) other (1) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 16 } pm1004vdcAlmFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Access Fail :This OID indicates a failure on the Client port FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 13 } pm1004vdcAlmSfpDdmCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Custom Alarm On Client SFP DDM :This OID indicates a Custom alarm is being received from the Client SFP DDM This alarm indicates if a DDM Custom Alarm has been detected on the client transceiver SFP_DDM_CRIT_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 12 } pm1004vdcAlmSfpDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM (only significant on Client6-GbE port) This alarm indicates if a DDM Alarm has been detected on the client transceiver (only significant on Client6-GbE port) SFP_DDM_ALM_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 11 } pm1004vdcAlmSfpDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM (only significant on Client6-GbE port) This alarm indicates if a DDM Warning has been detected on the client transceiver (only significant on Client6-GbE port) SFP_DDM_WARNING_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 10 } pm1004vdcAlmDwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. This status indictaes if a Client Alarm Indication Signal is currently inserted on the client interface DW_CAIS_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 9 } pm1004vdcAlmClientLocalOosRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Rx Client Port In Service :This OID indicates that the local Rx Client port is In Service (1) or Out of Service (2) This status indicates if the local Rx client port is in service CLIENT_LOCAL_OOS_RX informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 8 } pm1004vdcAlmClientLocalOosTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Tx Client Port In Service :This OID indicates that the local Tx Client port is In Service (1) or Out of Service (2) This status indicates if the local Tx client port is in service CLIENT_LOCAL_OOS_TX informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 7 } pm1004vdcAlmDwLsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Shutdown :This OID indicates the Client SFP transmitter output is ON. This status indicates if the client transceiver is ON or OFF DW_LSD_1 other (1) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 6 } pm1004vdcAlmHwFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. HW_FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 5 } pm1004vdcAlmDdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function (only significant on Client6-GbE port) This status indicates if the client transceiver includes the DDM feature (only significant on Client6-GbE port) DDM_ABSENT_1 equipmentMalfunction (16) other (1) (2) " ::= { pm1004vdcAlmsynthAlmPortEntry 3 } pm1004vdcAlmSfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Absent :This OID indicates that the SFP module is not present in the client port (only significant on Client6-GbE port). This alarm indicates if the client transceiver is present (only significant on Client6-GbE port) SFP_ABSENT_1 inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm1004vdcAlmsynthAlmPortEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmaccessioAlm articles --- ********************************************************* pm1004vdcAlmaccessioAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmaccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmaccessioAlm Article " ::= { pm1004vdcAlmClientCrit 16 } pm1004vdcAlmaccessioAlmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmaccessioAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmaccessioAlm table " INDEX { pm1004vdcAlmaccessioAlmIndex } ::= { pm1004vdcAlmaccessioAlmTable 1 } Pm1004vdcAlmaccessioAlmEntry ::= SEQUENCE { pm1004vdcAlmaccessioAlmIndex INTEGER, pm1004vdcAlmUpLosPortn EkiOnOff, pm1004vdcAlmDwLasFailPortn EkiOnOff } pm1004vdcAlmaccessioAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmaccessioAlm table " ::= { pm1004vdcAlmaccessioAlmEntry 1 } pm1004vdcAlmUpLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Loss Of Signal :This OID indicates that no signal is present on the client port This alarm indicates if a signal is detected on the client input UP_LOS_1 receiveFailure (41) physicalViolation (9) (2) " ::= { pm1004vdcAlmaccessioAlmEntry 5 } pm1004vdcAlmDwLasFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port. This alarm reports the transmitter failure alarm generated by the SFPs. This alarm indicates if the laser of the client transceiver is in fail condition DW_LAS_FAIL_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmaccessioAlmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmsfpAlmDdm articles --- ********************************************************* pm1004vdcAlmsfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmsfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmsfpAlmDdm Article " ::= { pm1004vdcAlmClientUrg 32 } pm1004vdcAlmsfpAlmDdmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmsfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmsfpAlmDdm table " INDEX { pm1004vdcAlmsfpAlmDdmIndex } ::= { pm1004vdcAlmsfpAlmDdmTable 1 } Pm1004vdcAlmsfpAlmDdmEntry ::= SEQUENCE { pm1004vdcAlmsfpAlmDdmIndex INTEGER, pm1004vdcAlmRxPwrHighAlaPortn EkiOnOff, pm1004vdcAlmRxPwrLowAlaPortn EkiOnOff, pm1004vdcAlmTempHighAlaPortn EkiOnOff, pm1004vdcAlmTempLowAlaPortn EkiOnOff, pm1004vdcAlmVccHighAlaPortn EkiOnOff, pm1004vdcAlmVccLowAlaPortn EkiOnOff, pm1004vdcAlmTxBiasHighAlaPortn EkiOnOff, pm1004vdcAlmTxBiasLowAlaPortn EkiOnOff, pm1004vdcAlmTxPwrHighAlaPortn EkiOnOff, pm1004vdcAlmTxPwrLowAlaPortn EkiOnOff } pm1004vdcAlmsfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmsfpAlmDdm table " ::= { pm1004vdcAlmsfpAlmDdmEntry 1 } pm1004vdcAlmRxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM RX_PWR_HIGH_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 17 } pm1004vdcAlmRxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM RX_PWR_LOW_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 16 } pm1004vdcAlmTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 9 } pm1004vdcAlmTempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM TEMP_LOW_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 8 } pm1004vdcAlmVccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM VCC_HIGH_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 7 } pm1004vdcAlmVccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM VCC_LOW_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 6 } pm1004vdcAlmTxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM TX_BIAS_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 5 } pm1004vdcAlmTxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM TX_BIAS_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 4 } pm1004vdcAlmTxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM TX_PWR_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 3 } pm1004vdcAlmTxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM TX_PWR_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmsfpWarnDdm articles --- ********************************************************* pm1004vdcAlmsfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmsfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmsfpWarnDdm Article " ::= { pm1004vdcAlmClientNurg 48 } pm1004vdcAlmsfpWarnDdmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmsfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmsfpWarnDdm table " INDEX { pm1004vdcAlmsfpWarnDdmIndex } ::= { pm1004vdcAlmsfpWarnDdmTable 1 } Pm1004vdcAlmsfpWarnDdmEntry ::= SEQUENCE { pm1004vdcAlmsfpWarnDdmIndex INTEGER, pm1004vdcAlmRxPwrHighWngPortn EkiOnOff, pm1004vdcAlmRxPwrLowWngPortn EkiOnOff, pm1004vdcAlmTempHighWngPortn EkiOnOff, pm1004vdcAlmTempLowWngPortn EkiOnOff, pm1004vdcAlmVccHighWngPortn EkiOnOff, pm1004vdcAlmVccLowWngPortn EkiOnOff, pm1004vdcAlmTxBiasHighWngPortn EkiOnOff, pm1004vdcAlmTxBiasLowWngPortn EkiOnOff, pm1004vdcAlmTxPwrHighWngPortn EkiOnOff, pm1004vdcAlmTxPwLowWngPortn EkiOnOff } pm1004vdcAlmsfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmsfpWarnDdm table " ::= { pm1004vdcAlmsfpWarnDdmEntry 1 } pm1004vdcAlmRxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM RX_PWR_HIGH_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 17 } pm1004vdcAlmRxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM RX_PWR_LOW_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 16 } pm1004vdcAlmTempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM TEMP_HIGH_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 9 } pm1004vdcAlmTempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM TEMP_LOW_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 8 } pm1004vdcAlmVccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM VCC_HIGH_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 7 } pm1004vdcAlmVccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM VCC_LOW_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 6 } pm1004vdcAlmTxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM TX_BIAS_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 5 } pm1004vdcAlmTxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM TX_BIAS_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 4 } pm1004vdcAlmTxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM TX_PWR_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 3 } pm1004vdcAlmTxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM TX_PW_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpWarnDdmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmsfpCritDdm articles --- ********************************************************* pm1004vdcAlmsfpCritDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmsfpCritDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmsfpCritDdm Article " ::= { pm1004vdcAlmClientNurg 56 } pm1004vdcAlmsfpCritDdmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmsfpCritDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmsfpCritDdm table " INDEX { pm1004vdcAlmsfpCritDdmIndex } ::= { pm1004vdcAlmsfpCritDdmTable 1 } Pm1004vdcAlmsfpCritDdmEntry ::= SEQUENCE { pm1004vdcAlmsfpCritDdmIndex INTEGER, pm1004vdcAlmRxPwrHighCritPortn EkiOnOff, pm1004vdcAlmRxPwrLowCritPortn EkiOnOff, pm1004vdcAlmTxPwrHighCritPortn EkiOnOff, pm1004vdcAlmTxPwrLowCritPortn EkiOnOff } pm1004vdcAlmsfpCritDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmsfpCritDdm table " ::= { pm1004vdcAlmsfpCritDdmEntry 1 } pm1004vdcAlmRxPwrHighCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Custom Rx Power High :Custom Alarm indicating that the SFP input power of port is higher than the custom threshold defined in configuration Custom Alarm indicating that the SFP input power of port is higher than the custom threshold defined in custom configuration RX_PWR_HIGH_CRIT_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpCritDdmEntry 17 } pm1004vdcAlmRxPwrLowCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Custom Rx Power Low :Custom Alarm indicating that the SFP input power of port is lower than the custom threshold defined in configuration Custom Alarm indicating that the SFP input power of port is lower than the custom threshold defined in custom configuration RX_PWR_LOW_CRIT_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpCritDdmEntry 16 } pm1004vdcAlmTxPwrHighCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Custom Tx Power High :Custom Alarm indicating that the SFP output power of port is higher than the custom threshold defined in configuration Custom Alarm indicating that the SFP output power of port is higher than the custom threshold defined in custom configuration TX_PWR_HIGH_CRIT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpCritDdmEntry 3 } pm1004vdcAlmTxPwrLowCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Custom Tx Power Low :Custom Alarm indicating that the SFP output power of port is lower than the custom threshold defined in configuration Custom Alarm indicating that the SFP output power of port is lower than the custom threshold defined in custom configuration TX_PWR_LOW_CRIT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmsfpCritDdmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmmapperDeAlm articles --- ********************************************************* pm1004vdcAlmmapperDeAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmmapperDeAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmmapperDeAlm Article " ::= { pm1004vdcAlmClientCrit 72 } pm1004vdcAlmmapperDeAlmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmmapperDeAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmmapperDeAlm table " INDEX { pm1004vdcAlmmapperDeAlmIndex } ::= { pm1004vdcAlmmapperDeAlmTable 1 } Pm1004vdcAlmmapperDeAlmEntry ::= SEQUENCE { pm1004vdcAlmmapperDeAlmIndex INTEGER, pm1004vdcAlmDwBufferOvlPortn EkiOnOff, pm1004vdcAlmDwCsfDetPortn EkiOnOff, pm1004vdcAlmUpBufferOvlPortn EkiOnOff, pm1004vdcAlmUpAccOosPortn EkiOnOff } pm1004vdcAlmmapperDeAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmmapperDeAlm table " ::= { pm1004vdcAlmmapperDeAlmEntry 1 } pm1004vdcAlmDwBufferOvlPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. This alarm indicates if there is a downstream FIFO overload for this client port DW_BUFFER_OVL_1 equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmmapperDeAlmEntry 15 } pm1004vdcAlmDwCsfDetPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction This alarm indicates if a Client Signal Fail has been detected in the incoming line frame for this client port DW_CSF_DET_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmmapperDeAlmEntry 12 } pm1004vdcAlmUpBufferOvlPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. This alarm indicates if there is a upstream FIFO overload for this client port UP_BUFFER_OVL_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004vdcAlmmapperDeAlmEntry 11 } pm1004vdcAlmUpAccOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Loss Of Synchro :This OID indicates the upstream client input port has lost synchronization on its decoder This alarms indicates if the input client signal is correctly synchronized with the decoder UP_ACC_OOS_1 receiveFailure (41) integrityViolation (7) (2) " ::= { pm1004vdcAlmmapperDeAlmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmvideoProtocolStatus articles --- ********************************************************* pm1004vdcAlmvideoProtocolStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmvideoProtocolStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmvideoProtocolStatus Article " ::= { pm1004vdcAlmClientCrit 112 } pm1004vdcAlmvideoProtocolStatusEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmvideoProtocolStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmvideoProtocolStatus table " INDEX { pm1004vdcAlmvideoProtocolStatusIndex } ::= { pm1004vdcAlmvideoProtocolStatusTable 1 } Pm1004vdcAlmvideoProtocolStatusEntry ::= SEQUENCE { pm1004vdcAlmvideoProtocolStatusIndex INTEGER, pm1004vdcAlmGbeRxPortn EkiOnOff, pm1004vdcAlmFastEtherRxPortn EkiOnOff, pm1004vdcAlmDvbAsiRxPortn EkiOnOff, pm1004vdcAlmHdSdiNtscRxPortn EkiOnOff, pm1004vdcAlmHdSdiPalRxPortn EkiOnOff, pm1004vdcAlmSdiRxPortn EkiOnOff, pm1004vdcAlmGbeTxPortn EkiOnOff, pm1004vdcAlmFastEtherTxPortn EkiOnOff, pm1004vdcAlmDvbAsiTxPortn EkiOnOff, pm1004vdcAlmHdSdiNtscTxPortn EkiOnOff, pm1004vdcAlmHdSdiPalTxPortn EkiOnOff, pm1004vdcAlmSdiTxPortn EkiOnOff } pm1004vdcAlmvideoProtocolStatusIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmvideoProtocolStatus table " ::= { pm1004vdcAlmvideoProtocolStatusEntry 1 } pm1004vdcAlmGbeRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Gigabit Ethernet Detected On Rx :This OID indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) This status indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) GBE_RX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 15 } pm1004vdcAlmFastEtherRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fast Ethernet Detected On Rx :This OID indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) This status indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) FAST_ETHER_RX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 14 } pm1004vdcAlmDvbAsiRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DVB-ASI Detected On Rx :This OID indicates that the DVB-ASI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) This status indicates that the DVB-ASI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) DVB_ASI_RX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 13 } pm1004vdcAlmHdSdiNtscRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " HD-SDI-NTSC Detected On Rx :This OID indicates that the HD-SDI-NTSC protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) This status indicates that the HD-SDI-NTSC protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) HD_SDI_NTSC_RX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 12 } pm1004vdcAlmHdSdiPalRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " HD-SDI-PAL Detected On Rx :This OID indicates that the HD-SDI-PAL protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) This status indicates that the HD-SDI-PAL protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) HD_SDI_PAL_RX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 11 } pm1004vdcAlmSdiRxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SDI Detected On Rx :This OID indicates that the SDI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) This status indicates that the SDI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) SDI_RX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 10 } pm1004vdcAlmGbeTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Gigabit Ethernet Detected On Tx :This OID indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) This status indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) GBE_TX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 7 } pm1004vdcAlmFastEtherTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fast Ethernet Detected On Tx :This OID indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) This status indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) FAST_ETHER_TX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 6 } pm1004vdcAlmDvbAsiTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DVB-ASI Detected On Tx :This OID indicates that the DVB-ASI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) This status indicates that the DVB-ASI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) DVB_ASI_TX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 5 } pm1004vdcAlmHdSdiNtscTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " HD-SDI-NTSC Detected On Tx :This OID indicates that the HD-SDI-NTSC protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) This status indicates that the HD-SDI-NTSC protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) HD_SDI_NTSC_TX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 4 } pm1004vdcAlmHdSdiPalTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " HD-SDI-PAL Detected On Tx :This OID indicates that the HD-SDI-PAL protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) This status indicates that the HD-SDI-PAL protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) HD_SDI_PAL_TX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 3 } pm1004vdcAlmSdiTxPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SDI Detected On Tx :This OID indicates that the SDI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) This status indicates that the SDI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) SDI_TX_1 informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmvideoProtocolStatusEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmdfrmAlm articles --- ********************************************************* pm1004vdcAlmdfrmAlmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmdfrmAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmdfrmAlm Article " ::= { pm1004vdcAlmLineCrit 128 } pm1004vdcAlmdfrmAlmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmdfrmAlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmdfrmAlm table " INDEX { pm1004vdcAlmdfrmAlmIndex } ::= { pm1004vdcAlmdfrmAlmTable 1 } Pm1004vdcAlmdfrmAlmEntry ::= SEQUENCE { pm1004vdcAlmdfrmAlmIndex INTEGER, pm1004vdcAlmDwLossofsyncPortn EkiOnOff } pm1004vdcAlmdfrmAlmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmdfrmAlm table " ::= { pm1004vdcAlmdfrmAlmEntry 1 } pm1004vdcAlmDwLossofsyncPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Loss Of Synchronisation :This OID indicates the upstream line input port is in Loss of Synchronization. This alarms indicates if the input signal is correctly synchronized DW_LOSSOFSYNC_1 receiveFailure (41) physicalViolation (9) (2) " ::= { pm1004vdcAlmdfrmAlmEntry 5 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineSyncAlarms articles --- ********************************************************* pm1004vdcAlmlineSyncAlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineSyncAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineSyncAlarms Article " ::= { pm1004vdcAlmLineCrit 133 } pm1004vdcAlmlineSyncAlarmsEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineSyncAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineSyncAlarms table " INDEX { pm1004vdcAlmlineSyncAlarmsIndex } ::= { pm1004vdcAlmlineSyncAlarmsTable 1 } Pm1004vdcAlmlineSyncAlarmsEntry ::= SEQUENCE { pm1004vdcAlmlineSyncAlarmsIndex INTEGER, pm1004vdcAlmDwLosPortn EkiOnOff, pm1004vdcAlmUpLockerrPortn EkiOnOff, pm1004vdcAlmDwLockerrPortn EkiOnOff } pm1004vdcAlmlineSyncAlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineSyncAlarms table " ::= { pm1004vdcAlmlineSyncAlarmsEntry 1 } pm1004vdcAlmDwLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. This alarm indicates if an optical signal is detected on the line transceiver input DW_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pm1004vdcAlmlineSyncAlarmsEntry 17 } pm1004vdcAlmUpLockerrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. UP_LOCKERR receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineSyncAlarmsEntry 14 } pm1004vdcAlmDwLockerrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. DW_LOCKERR receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineSyncAlarmsEntry 13 } --- ***************************************************** --- LEAF for the modInitFailLevel2 article --- ***************************************************** pm1004vdcAlmmodInitFailLevel2 OBJECT IDENTIFIER ::= { pm1004vdcAlmOtherUrg 194 } pm1004vdcAlmSwInitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions This alarm indicates if the SW module is correctly initialized SW_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel2 5 } pm1004vdcAlmResetHwInitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions This alarm indicates if the HW has been correctly initialized RESET_HW_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel2 4 } pm1004vdcAlmBootUndone OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Boot Undone :This OID indicates that the boot has not been correctly achieved This alarm indicates if the module has correctly boot BOOT_UNDONE softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel2 3 } pm1004vdcAlmNextColdBootForced OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold This alarm indicates that the next reset of the module will be forced to cold reset NEXT_COLD_BOOT_FORCED informationalStatus(1000) other (1) (2) " ::= { pm1004vdcAlmmodInitFailLevel2 2 } pm1004vdcAlmLedFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Led Fail :This OID indicates that Led register has not been correctly initalized This alarm indicates if the module LEDs are correctly initialized LED_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel2 1 } --- ***************************************************** --- LEAF for the modInitFailLevel3 article --- ***************************************************** pm1004vdcAlmmodInitFailLevel3 OBJECT IDENTIFIER ::= { pm1004vdcAlmOtherUrg 195 } pm1004vdcAlmClient6InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client6 Init Fail :This OID indicates that Client 6 registers subset has not been correctly initialized This alarm indicates if the client port 6 is correctly initialized CLIENT6_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 14 } pm1004vdcAlmClient5InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client5 Init Fail :This OID indicates that Client 5 registers subset has not been correctly initialized This alarm indicates if the client port 5 is correctly initialized CLIENT5_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 13 } pm1004vdcAlmClient4InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized This alarm indicates if the client port 4 is correctly initialized CLIENT4_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 12 } pm1004vdcAlmClient3InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized This alarm indicates if the client port 3 is correctly initialized CLIENT3_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 11 } pm1004vdcAlmClient2InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized This alarm indicates if the client port 2 is correctly initialized CLIENT2_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 10 } pm1004vdcAlmClient1InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized This alarm indicates if the client port 1 is correctly initialized CLIENT1_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 9 } pm1004vdcAlmLine2InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized This alarm indicates if the line port 2 is correctly initialized LINE2_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 8 } pm1004vdcAlmLine1InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized This alarm indicates if the line port 1 is correctly initialized LINE1_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 7 } pm1004vdcAlmXfp2InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized This alarm indicates if the line transceiver 2 is correctly initialized XFP2_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 6 } pm1004vdcAlmXfp1InitFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized This alarm indicates if the line transceiver 1 is correctly initialized XFP1_INIT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 5 } pm1004vdcAlmInitModuleFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Init Module Fail :This OID indicates that the Module has not been correctly initialized This alarm indicates if the SW module is correctly initialized INIT_MODULE_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 3 } pm1004vdcAlmObmTypeReadFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OBM Type Read Fail :This OID indicates that OBM type has not been recognized This alarm indicates if the OBM board has been correctly identified OBM_TYPE_READ_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 2 } pm1004vdcAlmGwIdentFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW Ident Fail :This OID indicates that GW identification has not been read This alarm indicates if the GW has been correctly identified GW_IDENT_FAIL softwareError (47) processingErrorAlarm (4) (2) " ::= { pm1004vdcAlmmodInitFailLevel3 1 } --- ***************************************************** --- LEAF for the clientRxProt article --- ***************************************************** pm1004vdcAlmclientRxProt OBJECT IDENTIFIER ::= { pm1004vdcAlmOtherUrg 198 } pm1004vdcAlmAdddropClient6East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client East Rx Side Active :This OID indicates the Client is active on East receiving side ADDDROP_CLIENT6_EAST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 14 } pm1004vdcAlmAdddropClient5East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client East Rx Side Active :This OID indicates the Client is active on East receiving side ADDDROP_CLIENT5_EAST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 13 } pm1004vdcAlmAdddropClient4East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client East Rx Side Active :This OID indicates the Client is active on East receiving side ADDDROP_CLIENT4_EAST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 12 } pm1004vdcAlmAdddropClient3East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client East Rx Side Active :This OID indicates the Client is active on East receiving side ADDDROP_CLIENT3_EAST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 11 } pm1004vdcAlmAdddropClient2East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client East Rx Side Active :This OID indicates the Client is active on East receiving side ADDDROP_CLIENT2_EAST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 10 } pm1004vdcAlmAdddropClient1East OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client East Rx Side Active :This OID indicates the Client is active on East receiving side ADDDROP_CLIENT1_EAST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 9 } pm1004vdcAlmAdddropClient6West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client West Rx Side Active :This OID indicates the Client is active on West receiving side ADDDROP_CLIENT6_WEST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 6 } pm1004vdcAlmAdddropClient5West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client West Rx Side Active :This OID indicates the Client is active on West receiving side ADDDROP_CLIENT5_WEST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 5 } pm1004vdcAlmAdddropClient4West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client West Rx Side Active :This OID indicates the Client is active on West receiving side ADDDROP_CLIENT4_WEST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 4 } pm1004vdcAlmAdddropClient3West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client West Rx Side Active :This OID indicates the Client is active on West receiving side ADDDROP_CLIENT3_WEST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 3 } pm1004vdcAlmAdddropClient2West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client West Rx Side Active :This OID indicates the Client is active on West receiving side ADDDROP_CLIENT2_WEST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 2 } pm1004vdcAlmAdddropClient1West OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client West Rx Side Active :This OID indicates the Client is active on West receiving side ADDDROP_CLIENT1_WEST other (1) other (1) (2) " ::= { pm1004vdcAlmclientRxProt 1 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineXfp1Alarm articles --- ********************************************************* pm1004vdcAlmlineXfp1AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineXfp1AlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineXfp1Alarm Article " ::= { pm1004vdcAlmLineUrg 208 } pm1004vdcAlmlineXfp1AlarmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineXfp1AlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineXfp1Alarm table " INDEX { pm1004vdcAlmlineXfp1AlarmIndex } ::= { pm1004vdcAlmlineXfp1AlarmTable 1 } Pm1004vdcAlmlineXfp1AlarmEntry ::= SEQUENCE { pm1004vdcAlmlineXfp1AlarmIndex INTEGER, pm1004vdcAlmRxPowerHighAlarmPortn EkiOnOff, pm1004vdcAlmRxPowerLowAlarmPortn EkiOnOff, pm1004vdcAlmTempHighAlarmPortn EkiOnOff, pm1004vdcAlmTempLowAlarmPortn EkiOnOff, pm1004vdcAlmTxBiasHighAlarmPortn EkiOnOff, pm1004vdcAlmTxBiasLowAlarmPortn EkiOnOff, pm1004vdcAlmTxPowerHighAlarmPortn EkiOnOff, pm1004vdcAlmTxPowerLowAlarmPortn EkiOnOff } pm1004vdcAlmlineXfp1AlarmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineXfp1Alarm table " ::= { pm1004vdcAlmlineXfp1AlarmEntry 1 } pm1004vdcAlmRxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM RX_POWER_HIGH_ALARM_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 17 } pm1004vdcAlmRxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM RX_POWER_LOW_ALARM_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 16 } pm1004vdcAlmTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM TEMP_HIGH_ALARM_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 9 } pm1004vdcAlmTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM TEMP_LOW_ALARM_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 8 } pm1004vdcAlmTxBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM TX_BIAS_HIGH_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 5 } pm1004vdcAlmTxBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM TX_BIAS_LOW_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 4 } pm1004vdcAlmTxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM TX_POWER_HIGH_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 3 } pm1004vdcAlmTxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM TX_POWER_LOW_ALARM_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineXfp1Warnings articles --- ********************************************************* pm1004vdcAlmlineXfp1WarningsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineXfp1WarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineXfp1Warnings Article " ::= { pm1004vdcAlmLineNurg 209 } pm1004vdcAlmlineXfp1WarningsEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineXfp1WarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineXfp1Warnings table " INDEX { pm1004vdcAlmlineXfp1WarningsIndex } ::= { pm1004vdcAlmlineXfp1WarningsTable 1 } Pm1004vdcAlmlineXfp1WarningsEntry ::= SEQUENCE { pm1004vdcAlmlineXfp1WarningsIndex INTEGER, pm1004vdcAlmRxPowerHighWarningPortn EkiOnOff, pm1004vdcAlmRxPowerLowWarningPortn EkiOnOff, pm1004vdcAlmTempHighWarningPortn EkiOnOff, pm1004vdcAlmTempLowWarningPortn EkiOnOff, pm1004vdcAlmTxBiasHighWarningPortn EkiOnOff, pm1004vdcAlmTxBiasLowWarningPortn EkiOnOff, pm1004vdcAlmTxPowerHighWarningPortn EkiOnOff, pm1004vdcAlmTxPowerLowWarningPortn EkiOnOff } pm1004vdcAlmlineXfp1WarningsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineXfp1Warnings table " ::= { pm1004vdcAlmlineXfp1WarningsEntry 1 } pm1004vdcAlmRxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM RX_POWER_HIGH_WARNING_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 17 } pm1004vdcAlmRxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM RX_POWER_LOW_WARNING_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 16 } pm1004vdcAlmTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM TEMP_HIGH_WARNING_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 9 } pm1004vdcAlmTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM TEMP_LOW_WARNING_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 8 } pm1004vdcAlmTxBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM TX_BIAS_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 5 } pm1004vdcAlmTxBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM TX_BIAS_LOW_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 4 } pm1004vdcAlmTxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM TX_POWER_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 3 } pm1004vdcAlmTxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM TX_POWER_LOW_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1WarningsEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineXfp1Crit articles --- ********************************************************* pm1004vdcAlmlineXfp1CritTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineXfp1CritEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineXfp1Crit Article " ::= { pm1004vdcAlmLineUrg 210 } pm1004vdcAlmlineXfp1CritEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineXfp1CritEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineXfp1Crit table " INDEX { pm1004vdcAlmlineXfp1CritIndex } ::= { pm1004vdcAlmlineXfp1CritTable 1 } Pm1004vdcAlmlineXfp1CritEntry ::= SEQUENCE { pm1004vdcAlmlineXfp1CritIndex INTEGER, pm1004vdcAlmRxPowerHighCritPortn EkiOnOff, pm1004vdcAlmRxPowerLowCritPortn EkiOnOff, pm1004vdcAlmTxPowerHighCritPortn EkiOnOff, pm1004vdcAlmTxPowerLowCritPortn EkiOnOff } pm1004vdcAlmlineXfp1CritIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineXfp1Crit table " ::= { pm1004vdcAlmlineXfp1CritEntry 1 } pm1004vdcAlmRxPowerHighCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Custom Rx Power High :Custom Alarm indicating that the XFP/OTX input power of port is higher than the custom threshold defined in configuration Custom Alarm indicating that the XFP/OTX input power of port is higher than the custom threshold defined in custom configuration RX_POWER_HIGH_CRIT_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1CritEntry 17 } pm1004vdcAlmRxPowerLowCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Custom Rx Power Low :Custom Alarm indicating that the XFP/OTX input power of port is lower than the custom threshold defined in configuration Custom Alarm indicating that the XFP/OTX input power of port is lower than the custom threshold defined in custom configuration RX_POWER_LOW_CRIT_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1CritEntry 16 } pm1004vdcAlmTxPowerHighCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Custom Tx Power High :Custom Alarm indicating that the XFP/OTX output power of port is higher than the custom threshold defined in configuration Custom Alarm indicating that the XFP/OTX output power of port is higher than the custom threshold defined in custom configuration TX_POWER_HIGH_CRIT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1CritEntry 3 } pm1004vdcAlmTxPowerLowCritPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Custom Tx Power Low :Custom Alarm indicating that the XFP/OTX output power of port is lower than the custom threshold defined in configuration Custom Alarm indicating that the XFP/OTX output power of port is lower than the custom threshold defined in custom configuration TX_POWER_LOW_CRIT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1CritEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineXfp1Alarms articles --- ********************************************************* pm1004vdcAlmlineXfp1AlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineXfp1AlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineXfp1Alarms Article " ::= { pm1004vdcAlmLineCrit 211 } pm1004vdcAlmlineXfp1AlarmsEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineXfp1AlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineXfp1Alarms table " INDEX { pm1004vdcAlmlineXfp1AlarmsIndex } ::= { pm1004vdcAlmlineXfp1AlarmsTable 1 } Pm1004vdcAlmlineXfp1AlarmsEntry ::= SEQUENCE { pm1004vdcAlmlineXfp1AlarmsIndex INTEGER, pm1004vdcAlmApdSupplyFaultPortn EkiOnOff, pm1004vdcAlmTecFaultPortn EkiOnOff, pm1004vdcAlmWavelengthUnlockedPortn EkiOnOff, pm1004vdcAlmTxNrPortn EkiOnOff, pm1004vdcAlmTxFaultPortn EkiOnOff, pm1004vdcAlmTxCdrNotLockedPortn EkiOnOff, pm1004vdcAlmRxNrPortn EkiOnOff, pm1004vdcAlmRxCdrNotLockedPortn EkiOnOff, pm1004vdcAlmModNrPortn EkiOnOff } pm1004vdcAlmlineXfp1AlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineXfp1Alarms table " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 1 } pm1004vdcAlmApdSupplyFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply This alarm indicates if the APD power supply is in fail condition APD_SUPPLY_FAULT_1 receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 17 } pm1004vdcAlmTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module This alarm indicates if the TEC of the line transceiver is in fail condition TEC_FAULT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 16 } pm1004vdcAlmWavelengthUnlockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance This alarm indicates if the wavelenght of the line transceiver is locked WAVELENGTH_UNLOCKED_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 15 } pm1004vdcAlmTxNrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side This alarm indicates if the Tx part of the line transceiver is ready TX_NR_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 9 } pm1004vdcAlmTxFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste This alarm indicates if the laser of the line transceiver is in fail condition TX_FAULT_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 8 } pm1004vdcAlmTxCdrNotLockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. This alarm indicates if the Tx CDR is locked in the line transceiver TX_CDR_NOT_LOCKED1_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 7 } pm1004vdcAlmRxNrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. This alarm indicates if the Rx part of the line transceiver is ready RX_NR_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 6 } pm1004vdcAlmRxCdrNotLockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected This alarm indicates if the Rx CDR is locked in the line transceiver RX_CDR_NOT_LOCKED1_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 4 } pm1004vdcAlmModNrPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. This alarm indicates if the line transceiver is ready MOD_NR_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1AlarmsEntry 3 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineXfp1SupplyAlarm articles --- ********************************************************* pm1004vdcAlmlineXfp1SupplyAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineXfp1SupplyAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineXfp1SupplyAlarm Article " ::= { pm1004vdcAlmLineUrg 212 } pm1004vdcAlmlineXfp1SupplyAlarmEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineXfp1SupplyAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineXfp1SupplyAlarm table " INDEX { pm1004vdcAlmlineXfp1SupplyAlarmIndex } ::= { pm1004vdcAlmlineXfp1SupplyAlarmTable 1 } Pm1004vdcAlmlineXfp1SupplyAlarmEntry ::= SEQUENCE { pm1004vdcAlmlineXfp1SupplyAlarmIndex INTEGER, pm1004vdcAlmVcc5HighWarningPortn EkiOnOff, pm1004vdcAlmVcc5LowWarningPortn EkiOnOff, pm1004vdcAlmVcc3HighWarningPortn EkiOnOff, pm1004vdcAlmVcc3LowWarningPortn EkiOnOff, pm1004vdcAlmVcc2HighWarningPortn EkiOnOff, pm1004vdcAlmVcc2LowWarningPortn EkiOnOff, pm1004vdcAlmVee5HighWarningPortn EkiOnOff, pm1004vdcAlmVee5LowWarningPortn EkiOnOff, pm1004vdcAlmVcc5HighAlarmPortn EkiOnOff, pm1004vdcAlmVcc5LowAlarmPortn EkiOnOff, pm1004vdcAlmVcc3HighAlarmPortn EkiOnOff, pm1004vdcAlmVcc3LowAlarmPortn EkiOnOff, pm1004vdcAlmVcc2HighAlarmPortn EkiOnOff, pm1004vdcAlmVcc2LowAlarmPortn EkiOnOff, pm1004vdcAlmVee5HighAlarmPortn EkiOnOff, pm1004vdcAlmVee5LowAlarmPortn EkiOnOff } pm1004vdcAlmlineXfp1SupplyAlarmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineXfp1SupplyAlarm table " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 1 } pm1004vdcAlmVcc5HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM VCC5_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 17 } pm1004vdcAlmVcc5LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM VCC5_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 16 } pm1004vdcAlmVcc3HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM VCC3_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 15 } pm1004vdcAlmVcc3LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM VCC3_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 14 } pm1004vdcAlmVcc2HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM VCC2_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 13 } pm1004vdcAlmVcc2LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM VCC2_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 12 } pm1004vdcAlmVee5HighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM VEE5_HIGH_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 11 } pm1004vdcAlmVee5LowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM VEE5_LOW_WARNING_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 10 } pm1004vdcAlmVcc5HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM VCC5_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 9 } pm1004vdcAlmVcc5LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM VCC5_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 8 } pm1004vdcAlmVcc3HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM VCC3_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 7 } pm1004vdcAlmVcc3LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM VCC3_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 6 } pm1004vdcAlmVcc2HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM VCC2_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 5 } pm1004vdcAlmVcc2LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM VCC2_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 4 } pm1004vdcAlmVee5HighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM VEE5_HIGH_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 3 } pm1004vdcAlmVee5LowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM VEE5_LOW_ALARM_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineXfp1SupplyAlarmEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineOtx1TlhAlarms articles --- ********************************************************* pm1004vdcAlmlineOtx1TlhAlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineOtx1TlhAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineOtx1TlhAlarms Article " ::= { pm1004vdcAlmLineUrg 224 } pm1004vdcAlmlineOtx1TlhAlarmsEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineOtx1TlhAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineOtx1TlhAlarms table " INDEX { pm1004vdcAlmlineOtx1TlhAlarmsIndex } ::= { pm1004vdcAlmlineOtx1TlhAlarmsTable 1 } Pm1004vdcAlmlineOtx1TlhAlarmsEntry ::= SEQUENCE { pm1004vdcAlmlineOtx1TlhAlarmsIndex INTEGER, pm1004vdcAlmLineLaserTempHighAlaPortn EkiOnOff, pm1004vdcAlmLineFreqDevHighAlaPortn EkiOnOff, pm1004vdcAlmLineAgingHighAlaPortn EkiOnOff, pm1004vdcAlmLineModulatorAgingHighAlaPortn EkiOnOff } pm1004vdcAlmlineOtx1TlhAlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineOtx1TlhAlarms table " ::= { pm1004vdcAlmlineOtx1TlhAlarmsEntry 1 } pm1004vdcAlmLineLaserTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM LINE_LASER_TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhAlarmsEntry 15 } pm1004vdcAlmLineFreqDevHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM LINE_FREQ_DEV_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhAlarmsEntry 13 } pm1004vdcAlmLineAgingHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM LINE_AGING_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhAlarmsEntry 7 } pm1004vdcAlmLineModulatorAgingHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM LINE_MODULATOR_AGING_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhAlarmsEntry 6 } --- ********************************************************* --- TABLE for the pm1004vdcAlmlineOtx1TlhWarnings articles --- ********************************************************* pm1004vdcAlmlineOtx1TlhWarningsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcAlmlineOtx1TlhWarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcAlmlineOtx1TlhWarnings Article " ::= { pm1004vdcAlmLineNurg 225 } pm1004vdcAlmlineOtx1TlhWarningsEntry OBJECT-TYPE SYNTAX Pm1004vdcAlmlineOtx1TlhWarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcAlmlineOtx1TlhWarnings table " INDEX { pm1004vdcAlmlineOtx1TlhWarningsIndex } ::= { pm1004vdcAlmlineOtx1TlhWarningsTable 1 } Pm1004vdcAlmlineOtx1TlhWarningsEntry ::= SEQUENCE { pm1004vdcAlmlineOtx1TlhWarningsIndex INTEGER, pm1004vdcAlmLineLaserTempHighWarningPortn EkiOnOff, pm1004vdcAlmLineFreqDevHighWarningPortn EkiOnOff, pm1004vdcAlmLineAgingHighWarningPortn EkiOnOff, pm1004vdcAlmLineModulatorAgingHighWarningPortn EkiOnOff } pm1004vdcAlmlineOtx1TlhWarningsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcAlmlineOtx1TlhWarnings table " ::= { pm1004vdcAlmlineOtx1TlhWarningsEntry 1 } pm1004vdcAlmLineLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM LINE_LASER_TEMP_HIGH_WARNING_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhWarningsEntry 15 } pm1004vdcAlmLineFreqDevHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM LINE_FREQ_DEV_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhWarningsEntry 13 } pm1004vdcAlmLineAgingHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM LINE_AGING_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhWarningsEntry 7 } pm1004vdcAlmLineModulatorAgingHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM LINE_MODULATOR_AGING_HIGH_WARNING_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm1004vdcAlmlineOtx1TlhWarningsEntry 6 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the confMgnt1 article --- ***************************************************** pm1004vdcCtrlconfMgnt1 OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 1 } pm1004vdcCtrlConf2Clear1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. This control restores the default configuration of the module " ::= { pm1004vdcCtrlconfMgnt1 14 } pm1004vdcCtrlConf2Flash1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. This control saves the customer configuration on the module " ::= { pm1004vdcCtrlconfMgnt1 10 } pm1004vdcCtrlConf2Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. " ::= { pm1004vdcCtrlconfMgnt1 2 } pm1004vdcCtrlConf1Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. " ::= { pm1004vdcCtrlconfMgnt1 1 } --- ***************************************************** --- LEAF for the synth4 article --- ***************************************************** pm1004vdcCtrlsynth4 OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 4 } pm1004vdcCtrlCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Disable Alarm Correlation :This OID disables the alarm correlation in the PM. " ::= { pm1004vdcCtrlsynth4 2 } pm1004vdcCtrlCorrelatOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Alarm Correlation :This OID enables the alarm correlation in the PM. " ::= { pm1004vdcCtrlsynth4 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pm1004vdcCtrlswMgnt OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 5 } pm1004vdcCtrlLoadSwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. This controls selects the second SW bank as the active bank for the next module reset " ::= { pm1004vdcCtrlswMgnt 6 } pm1004vdcCtrlLoadSwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. This controls selects the first SW bank as the active bank for the next module reset " ::= { pm1004vdcCtrlswMgnt 5 } pm1004vdcCtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. This control initiates a warm reset of the module. " ::= { pm1004vdcCtrlswMgnt 3 } pm1004vdcCtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pm1004vdcCtrlswMgnt 2 } --- ***************************************************** --- LEAF for the gwMgnt article --- ***************************************************** pm1004vdcCtrlgwMgnt OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 6 } pm1004vdcCtrlLoadGwBank4 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm1004vdcCtrlgwMgnt 8 } pm1004vdcCtrlLoadGwBank3 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the third GW bank as the active bank " ::= { pm1004vdcCtrlgwMgnt 7 } pm1004vdcCtrlLoadGwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm1004vdcCtrlgwMgnt 6 } pm1004vdcCtrlLoadGwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the first GW bank as the active bank " ::= { pm1004vdcCtrlgwMgnt 5 } pm1004vdcCtrlCurrentGwReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. " ::= { pm1004vdcCtrlgwMgnt 1 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlaccessLoop articles --- ********************************************************* pm1004vdcCtrlaccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlaccessLoop Article " ::= { pm1004vdcCtrlClient 16 } pm1004vdcCtrlaccessLoopEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlaccessLoop table " INDEX { pm1004vdcCtrlaccessLoopIndex } ::= { pm1004vdcCtrlaccessLoopTable 1 } Pm1004vdcCtrlaccessLoopEntry ::= SEQUENCE { pm1004vdcCtrlaccessLoopIndex INTEGER, pm1004vdcCtrlaccessLoopPortn EkiState } pm1004vdcCtrlaccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlaccessLoop table " ::= { pm1004vdcCtrlaccessLoopEntry 1 } pm1004vdcCtrlaccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver This maintenance parameter operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver " ::= { pm1004vdcCtrlaccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlportOosMode articles --- ********************************************************* pm1004vdcCtrlportOosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlportOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlportOosMode Article " ::= { pm1004vdcCtrlClient 18 } pm1004vdcCtrlportOosModeEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlportOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlportOosMode table " INDEX { pm1004vdcCtrlportOosModeIndex } ::= { pm1004vdcCtrlportOosModeTable 1 } Pm1004vdcCtrlportOosModeEntry ::= SEQUENCE { pm1004vdcCtrlportOosModeIndex INTEGER, pm1004vdcCtrlportOosModePortn Pm1004vdcClientOosMode } pm1004vdcCtrlportOosModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlportOosMode table " ::= { pm1004vdcCtrlportOosModeEntry 1 } pm1004vdcCtrlportOosModePortn OBJECT-TYPE SYNTAX Pm1004vdcClientOosMode MAX-ACCESS read-write STATUS current DESCRIPTION " Client Out Of Service :This OID sets the Service state of the client port (In Service, Tx Out of Service, Rx Out of Service or Port (Rx and Tx) Out of Service) This controls defines the service state of the client port (In Service, Tx Out of Service, Rx Out of Service or Port (Rx and Tx) Out of Service) " ::= { pm1004vdcCtrlportOosModeEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlsfpOffCtrl articles --- ********************************************************* pm1004vdcCtrlsfpOffCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlsfpOffCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlsfpOffCtrl Article " ::= { pm1004vdcCtrlClient 20 } pm1004vdcCtrlsfpOffCtrlEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlsfpOffCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlsfpOffCtrl table " INDEX { pm1004vdcCtrlsfpOffCtrlIndex } ::= { pm1004vdcCtrlsfpOffCtrlTable 1 } Pm1004vdcCtrlsfpOffCtrlEntry ::= SEQUENCE { pm1004vdcCtrlsfpOffCtrlIndex INTEGER, pm1004vdcCtrlsfpOffCtrlPortn EkiState } pm1004vdcCtrlsfpOffCtrlIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlsfpOffCtrl table " ::= { pm1004vdcCtrlsfpOffCtrlEntry 1 } pm1004vdcCtrlsfpOffCtrlPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Signal OFF :This OID switches off the SFP. This control defines the laser state of the client transceiver " ::= { pm1004vdcCtrlsfpOffCtrlEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlcsfUpIns articles --- ********************************************************* pm1004vdcCtrlcsfUpInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlcsfUpIns Article " ::= { pm1004vdcCtrlClient 21 } pm1004vdcCtrlcsfUpInsEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlcsfUpIns table " INDEX { pm1004vdcCtrlcsfUpInsIndex } ::= { pm1004vdcCtrlcsfUpInsTable 1 } Pm1004vdcCtrlcsfUpInsEntry ::= SEQUENCE { pm1004vdcCtrlcsfUpInsIndex INTEGER, pm1004vdcCtrlcsfUpInsPortn EkiState } pm1004vdcCtrlcsfUpInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlcsfUpIns table " ::= { pm1004vdcCtrlcsfUpInsEntry 1 } pm1004vdcCtrlcsfUpInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. This control inserts a Client Signal Fail for the client port " ::= { pm1004vdcCtrlcsfUpInsEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlcaisDwIns articles --- ********************************************************* pm1004vdcCtrlcaisDwInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlcaisDwIns Article " ::= { pm1004vdcCtrlClient 22 } pm1004vdcCtrlcaisDwInsEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlcaisDwIns table " INDEX { pm1004vdcCtrlcaisDwInsIndex } ::= { pm1004vdcCtrlcaisDwInsTable 1 } Pm1004vdcCtrlcaisDwInsEntry ::= SEQUENCE { pm1004vdcCtrlcaisDwInsIndex INTEGER, pm1004vdcCtrlcaisDwInsPortn EkiState } pm1004vdcCtrlcaisDwInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlcaisDwIns table " ::= { pm1004vdcCtrlcaisDwInsEntry 1 } pm1004vdcCtrlcaisDwInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. This control inserts a Client AIS for the client port " ::= { pm1004vdcCtrlcaisDwInsEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlclientAccessTermLoop articles --- ********************************************************* pm1004vdcCtrlclientAccessTermLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlclientAccessTermLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlclientAccessTermLoop Article " ::= { pm1004vdcCtrlClient 26 } pm1004vdcCtrlclientAccessTermLoopEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlclientAccessTermLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlclientAccessTermLoop table " INDEX { pm1004vdcCtrlclientAccessTermLoopIndex } ::= { pm1004vdcCtrlclientAccessTermLoopTable 1 } Pm1004vdcCtrlclientAccessTermLoopEntry ::= SEQUENCE { pm1004vdcCtrlclientAccessTermLoopIndex INTEGER, pm1004vdcCtrlclientAccessTermLoopPortn EkiState } pm1004vdcCtrlclientAccessTermLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlclientAccessTermLoop table " ::= { pm1004vdcCtrlclientAccessTermLoopEntry 1 } pm1004vdcCtrlclientAccessTermLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver This maintenance parameter operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver " ::= { pm1004vdcCtrlclientAccessTermLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlrxVideoProtocol articles --- ********************************************************* pm1004vdcCtrlrxVideoProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlrxVideoProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlrxVideoProtocol Article " ::= { pm1004vdcCtrlClient 43 } pm1004vdcCtrlrxVideoProtocolEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlrxVideoProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlrxVideoProtocol table " INDEX { pm1004vdcCtrlrxVideoProtocolIndex } ::= { pm1004vdcCtrlrxVideoProtocolTable 1 } Pm1004vdcCtrlrxVideoProtocolEntry ::= SEQUENCE { pm1004vdcCtrlrxVideoProtocolIndex INTEGER, pm1004vdcCtrlrxVideoProtocolPortn EkiState } pm1004vdcCtrlrxVideoProtocolIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlrxVideoProtocol table " ::= { pm1004vdcCtrlrxVideoProtocolEntry 1 } pm1004vdcCtrlrxVideoProtocolPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Force DVB ASI On RX Side :This OID selects the DVB ASI protocol on the client port and disable the auto-sensing feature This control selects the DVB ASI protocol on the client port and disable the auto-sensing feature " ::= { pm1004vdcCtrlrxVideoProtocolEntry 2 } --- ***************************************************** --- LEAF for the commAccessLoop article --- ***************************************************** pm1004vdcCtrlcommAccessLoop OBJECT IDENTIFIER ::= { pm1004vdcCtrlLine 64 } pm1004vdcCtrlCommAccessloop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS deprecated DESCRIPTION " PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. " ::= { pm1004vdcCtrlcommAccessLoop 1 } --- ***************************************************** --- LEAF for the lineLoop article --- ***************************************************** pm1004vdcCtrllineLoop OBJECT IDENTIFIER ::= { pm1004vdcCtrlLine 66 } pm1004vdcCtrlLineLoop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS deprecated DESCRIPTION " PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Upstream part of the module is timed on the 10 Gb/s recovered clock in that case. " ::= { pm1004vdcCtrllineLoop 1 } --- ***************************************************** --- LEAF for the protMgnt article --- ***************************************************** pm1004vdcCtrlProtMgnt OBJECT IDENTIFIER ::= { pm1004vdcCtrlLine 73 } pm1004vdcCtrlLineNumber OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Active Line Number : This OID sets the active line number " ::= { pm1004vdcCtrlProtMgnt 1 } pm1004vdcCtrlProtMode OBJECT-TYPE SYNTAX EkiMode MAX-ACCESS read-write STATUS current DESCRIPTION " Line Switch Mode (Auto Or Manual) :This bit selects the manual (1) or automatic (0) switch method This control defines the protection switch mode on the line interface " ::= { pm1004vdcCtrlProtMgnt 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrllineOosMode articles --- ********************************************************* pm1004vdcCtrllineOosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrllineOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrllineOosMode Article " ::= { pm1004vdcCtrlLine 74 } pm1004vdcCtrllineOosModeEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrllineOosModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrllineOosMode table " INDEX { pm1004vdcCtrllineOosModeIndex } ::= { pm1004vdcCtrllineOosModeTable 1 } Pm1004vdcCtrllineOosModeEntry ::= SEQUENCE { pm1004vdcCtrllineOosModeIndex INTEGER, pm1004vdcCtrllineOosModePortn EkiState } pm1004vdcCtrllineOosModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrllineOosMode table " ::= { pm1004vdcCtrllineOosModeEntry 1 } pm1004vdcCtrllineOosModePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Out Of Service (!Laser OFF!) :This OID sets the line port Out Of Service This control defines the service state of the line port " ::= { pm1004vdcCtrllineOosModeEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrladddropClientRxProtect articles --- ********************************************************* pm1004vdcCtrladddropClientRxProtectTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrladddropClientRxProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrladddropClientRxProtect Article " ::= { pm1004vdcCtrlClient 128 } pm1004vdcCtrladddropClientRxProtectEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrladddropClientRxProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrladddropClientRxProtect table " INDEX { pm1004vdcCtrladddropClientRxProtectIndex } ::= { pm1004vdcCtrladddropClientRxProtectTable 1 } Pm1004vdcCtrladddropClientRxProtectEntry ::= SEQUENCE { pm1004vdcCtrladddropClientRxProtectIndex INTEGER, pm1004vdcCtrladddropClientRxProtectPortn Pm1004vdcProtectionTimeSlot } pm1004vdcCtrladddropClientRxProtectIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrladddropClientRxProtect table " ::= { pm1004vdcCtrladddropClientRxProtectEntry 1 } pm1004vdcCtrladddropClientRxProtectPortn OBJECT-TYPE SYNTAX Pm1004vdcProtectionTimeSlot MAX-ACCESS read-write STATUS current DESCRIPTION " Client Switch Mode :This bit selects the manual (1) or automatic (0) switch method This control defines the protection switch mode on the client interface " ::= { pm1004vdcCtrladddropClientRxProtectEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrladddropTsClientMode articles --- ********************************************************* pm1004vdcCtrladddropTsClientModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrladddropTsClientModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrladddropTsClientMode Article " ::= { pm1004vdcCtrlClient 136 } pm1004vdcCtrladddropTsClientModeEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrladddropTsClientModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrladddropTsClientMode table " INDEX { pm1004vdcCtrladddropTsClientModeIndex } ::= { pm1004vdcCtrladddropTsClientModeTable 1 } Pm1004vdcCtrladddropTsClientModeEntry ::= SEQUENCE { pm1004vdcCtrladddropTsClientModeIndex INTEGER, pm1004vdcCtrladddropTsClientModePortn Pm1004vdcModeTimeSlot } pm1004vdcCtrladddropTsClientModeIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrladddropTsClientMode table " ::= { pm1004vdcCtrladddropTsClientModeEntry 1 } pm1004vdcCtrladddropTsClientModePortn OBJECT-TYPE SYNTAX Pm1004vdcModeTimeSlot MAX-ACCESS read-write STATUS current DESCRIPTION " Client Mode :This OID selects the mode on the client This control defines the mode (Add/Drop or Split&Select) of the Client " ::= { pm1004vdcCtrladddropTsClientModeEntry 2 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pm1004vdcCtrlledTest OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 192 } pm1004vdcCtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pm1004vdcCtrlledTest 3 } pm1004vdcCtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pm1004vdcCtrlledTest 2 } pm1004vdcCtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pm1004vdcCtrlledTest 1 } --- ***************************************************** --- LEAF for the moduleOosMode article --- ***************************************************** pm1004vdcCtrlmoduleOosMode OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 193 } pm1004vdcCtrlModuleOosMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Out Of Service :This OID sets the PM Out Of Service This control defines the service state of the complete module " ::= { pm1004vdcCtrlmoduleOosMode 1 } --- ***************************************************** --- LEAF for the maintenanceMode article --- ***************************************************** pm1004vdcCtrlmaintenanceMode OBJECT IDENTIFIER ::= { pm1004vdcCtrlOther 197 } pm1004vdcCtrlMaintenanceMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Maintenance :This OID enables the maintenance mode on the PM. This control enables the maintenance mode on the PM. " ::= { pm1004vdcCtrlmaintenanceMode 1 } --- ********************************************************* --- TABLE for the pm1004vdcCtrldccEnable articles --- ********************************************************* pm1004vdcCtrldccEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrldccEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrldccEnable Article " ::= { pm1004vdcCtrlLine 198 } pm1004vdcCtrldccEnableEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrldccEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrldccEnable table " INDEX { pm1004vdcCtrldccEnableIndex } ::= { pm1004vdcCtrldccEnableTable 1 } Pm1004vdcCtrldccEnableEntry ::= SEQUENCE { pm1004vdcCtrldccEnableIndex INTEGER, pm1004vdcCtrldccEnablePortn EkiState } pm1004vdcCtrldccEnableIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrldccEnable table " ::= { pm1004vdcCtrldccEnableEntry 1 } pm1004vdcCtrldccEnablePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " DCC Mode : This OID enables the DCC mode on the PM This control enables the DCC mode on the PM " ::= { pm1004vdcCtrldccEnableEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlxfpOnoff articles --- ********************************************************* pm1004vdcCtrlxfpOnoffTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlxfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlxfpOnoff Article " ::= { pm1004vdcCtrlLine 208 } pm1004vdcCtrlxfpOnoffEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlxfpOnoffEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlxfpOnoff table " INDEX { pm1004vdcCtrlxfpOnoffIndex } ::= { pm1004vdcCtrlxfpOnoffTable 1 } Pm1004vdcCtrlxfpOnoffEntry ::= SEQUENCE { pm1004vdcCtrlxfpOnoffIndex INTEGER, pm1004vdcCtrlxfpOnoffPortn EkiState } pm1004vdcCtrlxfpOnoffIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlxfpOnoff table " ::= { pm1004vdcCtrlxfpOnoffEntry 1 } pm1004vdcCtrlxfpOnoffPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " XFP/OTX Optical Laser OFF :This OID switches off the XFP or the OTX This control defines the laser state of the line transceiver " ::= { pm1004vdcCtrlxfpOnoffEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlxfpLineLoop articles --- ********************************************************* pm1004vdcCtrlxfpLineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlxfpLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlxfpLineLoop Article " ::= { pm1004vdcCtrlLine 209 } pm1004vdcCtrlxfpLineLoopEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlxfpLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlxfpLineLoop table " INDEX { pm1004vdcCtrlxfpLineLoopIndex } ::= { pm1004vdcCtrlxfpLineLoopTable 1 } Pm1004vdcCtrlxfpLineLoopEntry ::= SEQUENCE { pm1004vdcCtrlxfpLineLoopIndex INTEGER, pm1004vdcCtrlxfpLineLoopPortn EkiState } pm1004vdcCtrlxfpLineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlxfpLineLoop table " ::= { pm1004vdcCtrlxfpLineLoopEntry 1 } pm1004vdcCtrlxfpLineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management network is impacted This maintenance parameter operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management network is impacted " ::= { pm1004vdcCtrlxfpLineLoopEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcCtrlxfpXfiLoop articles --- ********************************************************* pm1004vdcCtrlxfpXfiLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCtrlxfpXfiLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCtrlxfpXfiLoop Article " ::= { pm1004vdcCtrlLine 210 } pm1004vdcCtrlxfpXfiLoopEntry OBJECT-TYPE SYNTAX Pm1004vdcCtrlxfpXfiLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCtrlxfpXfiLoop table " INDEX { pm1004vdcCtrlxfpXfiLoopIndex } ::= { pm1004vdcCtrlxfpXfiLoopTable 1 } Pm1004vdcCtrlxfpXfiLoopEntry ::= SEQUENCE { pm1004vdcCtrlxfpXfiLoopIndex INTEGER, pm1004vdcCtrlxfpXfiLoopPortn EkiState } pm1004vdcCtrlxfpXfiLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCtrlxfpXfiLoop table " ::= { pm1004vdcCtrlxfpXfiLoopEntry 1 } pm1004vdcCtrlxfpXfiLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers This maintenance parameter operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers. " ::= { pm1004vdcCtrlxfpXfiLoopEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- COUNTERS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm1004vdcCntdfrmB1ErrCnt articles --- ********************************************************* pm1004vdcCntdfrmB1ErrCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCntdfrmB1ErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCntdfrmB1ErrCnt Article " ::= { pm1004vdcCntLine 152 } pm1004vdcCntdfrmB1ErrCntEntry OBJECT-TYPE SYNTAX Pm1004vdcCntdfrmB1ErrCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCntdfrmB1ErrCnt table " INDEX { pm1004vdcCntdfrmB1ErrCntIndex } ::= { pm1004vdcCntdfrmB1ErrCntTable 1 } Pm1004vdcCntdfrmB1ErrCntEntry ::= SEQUENCE { pm1004vdcCntdfrmB1ErrCntIndex INTEGER, pm1004vdcCntdfrmB1ErrCntValuePortn Counter32, pm1004vdcCntdfrmB1ErrCntErrorPortn EkiOnOff, pm1004vdcCntdfrmB1ErrCntOverloadPortn EkiOnOff } pm1004vdcCntdfrmB1ErrCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCntdfrmB1ErrCnt table " ::= { pm1004vdcCntdfrmB1ErrCntEntry 1 } pm1004vdcCntdfrmB1ErrCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SM-BIP8 Errors :This counter is incremented each time a B1 error is detected on the Deframer input stream. This counter gives the number of B1 errors on the line port " ::= { pm1004vdcCntdfrmB1ErrCntEntry 2 } pm1004vdcCntdfrmB1ErrCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port " ::= { pm1004vdcCntdfrmB1ErrCntEntry 3 } pm1004vdcCntdfrmB1ErrCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a B1 error counter overload on Port " ::= { pm1004vdcCntdfrmB1ErrCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcCntdfrmTimCnt articles --- ********************************************************* pm1004vdcCntdfrmTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCntdfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcCntdfrmTimCnt Article " ::= { pm1004vdcCntLine 153 } pm1004vdcCntdfrmTimCntEntry OBJECT-TYPE SYNTAX Pm1004vdcCntdfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcCntdfrmTimCnt table " INDEX { pm1004vdcCntdfrmTimCntIndex } ::= { pm1004vdcCntdfrmTimCntTable 1 } Pm1004vdcCntdfrmTimCntEntry ::= SEQUENCE { pm1004vdcCntdfrmTimCntIndex INTEGER, pm1004vdcCntdfrmTimCntValuePortn Counter32, pm1004vdcCntdfrmTimCntErrorPortn EkiOnOff, pm1004vdcCntdfrmTimCntOverloadPortn EkiOnOff } pm1004vdcCntdfrmTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcCntdfrmTimCnt table " ::= { pm1004vdcCntdfrmTimCntEntry 1 } pm1004vdcCntdfrmTimCntValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. " ::= { pm1004vdcCntdfrmTimCntEntry 2 } pm1004vdcCntdfrmTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm1004vdcCntdfrmTimCntEntry 3 } pm1004vdcCntdfrmTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm1004vdcCntdfrmTimCntEntry 4 } pm1004vdcCntCountersReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters Reset:This OID resets and restarts all the counters" ::= { pm1004vdccounters 259 } pm1004vdcCntCountersStop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters stop:This OID stops all the counters" ::= { pm1004vdccounters 260 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- RMON --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm1004vdcMonupRmonByteCnt articles --- ********************************************************* pm1004vdcMonupRmonByteCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupRmonByteCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupRmonByteCnt Article " ::= { pm1004vdcMonClientRmonCounter 16 } pm1004vdcMonupRmonByteCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupRmonByteCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupRmonByteCnt table " INDEX { pm1004vdcMonupRmonByteCntIndex } ::= { pm1004vdcMonupRmonByteCntTable 1 } Pm1004vdcMonupRmonByteCntEntry ::= SEQUENCE { pm1004vdcMonupRmonByteCntIndex INTEGER, pm1004vdcMonupRmonByteCntValuePortn Counter64, pm1004vdcMonupRmonByteCntErrorPortn EkiOnOff, pm1004vdcMonupRmonByteCntOverloadPortn EkiOnOff } pm1004vdcMonupRmonByteCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupRmonByteCnt table " ::= { pm1004vdcMonupRmonByteCntEntry 1 } pm1004vdcMonupRmonByteCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Bytes :This counter is increased each time a data byte is received on the client port This counter gives the number of bytes received on the client port " ::= { pm1004vdcMonupRmonByteCntEntry 2 } pm1004vdcMonupRmonByteCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on clinet port " ::= { pm1004vdcMonupRmonByteCntEntry 3 } pm1004vdcMonupRmonByteCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port " ::= { pm1004vdcMonupRmonByteCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupRmonCrcErrorCnt articles --- ********************************************************* pm1004vdcMonupRmonCrcErrorCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupRmonCrcErrorCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupRmonCrcErrorCnt Article " ::= { pm1004vdcMonClientRmonCounter 24 } pm1004vdcMonupRmonCrcErrorCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupRmonCrcErrorCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupRmonCrcErrorCnt table " INDEX { pm1004vdcMonupRmonCrcErrorCntIndex } ::= { pm1004vdcMonupRmonCrcErrorCntTable 1 } Pm1004vdcMonupRmonCrcErrorCntEntry ::= SEQUENCE { pm1004vdcMonupRmonCrcErrorCntIndex INTEGER, pm1004vdcMonupRmonCrcErrorCntValuePortn Counter64, pm1004vdcMonupRmonCrcErrorCntErrorPortn EkiOnOff, pm1004vdcMonupRmonCrcErrorCntOverloadPortn EkiOnOff } pm1004vdcMonupRmonCrcErrorCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupRmonCrcErrorCnt table " ::= { pm1004vdcMonupRmonCrcErrorCntEntry 1 } pm1004vdcMonupRmonCrcErrorCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port This counter gives the number of CRC Errors received on the client port " ::= { pm1004vdcMonupRmonCrcErrorCntEntry 2 } pm1004vdcMonupRmonCrcErrorCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on clinet port " ::= { pm1004vdcMonupRmonCrcErrorCntEntry 3 } pm1004vdcMonupRmonCrcErrorCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port " ::= { pm1004vdcMonupRmonCrcErrorCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupRmonPacketsCnt articles --- ********************************************************* pm1004vdcMonupRmonPacketsCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupRmonPacketsCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupRmonPacketsCnt Article " ::= { pm1004vdcMonClientRmonCounter 32 } pm1004vdcMonupRmonPacketsCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupRmonPacketsCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupRmonPacketsCnt table " INDEX { pm1004vdcMonupRmonPacketsCntIndex } ::= { pm1004vdcMonupRmonPacketsCntTable 1 } Pm1004vdcMonupRmonPacketsCntEntry ::= SEQUENCE { pm1004vdcMonupRmonPacketsCntIndex INTEGER, pm1004vdcMonupRmonPacketsCntValuePortn Counter64, pm1004vdcMonupRmonPacketsCntErrorPortn EkiOnOff, pm1004vdcMonupRmonPacketsCntOverloadPortn EkiOnOff } pm1004vdcMonupRmonPacketsCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupRmonPacketsCnt table " ::= { pm1004vdcMonupRmonPacketsCntEntry 1 } pm1004vdcMonupRmonPacketsCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Packets :This counter is increased each time a packet is received on the client port This counter gives the number of packets received on the client port " ::= { pm1004vdcMonupRmonPacketsCntEntry 2 } pm1004vdcMonupRmonPacketsCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Error :This OID when set indicates the Packets counter value is invalid on clinet port " ::= { pm1004vdcMonupRmonPacketsCntEntry 3 } pm1004vdcMonupRmonPacketsCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Overload :This OID when set indicates a Packets counter overload on client port " ::= { pm1004vdcMonupRmonPacketsCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupRmonBroadcastCnt articles --- ********************************************************* pm1004vdcMonupRmonBroadcastCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupRmonBroadcastCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupRmonBroadcastCnt Article " ::= { pm1004vdcMonClientRmonCounter 40 } pm1004vdcMonupRmonBroadcastCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupRmonBroadcastCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupRmonBroadcastCnt table " INDEX { pm1004vdcMonupRmonBroadcastCntIndex } ::= { pm1004vdcMonupRmonBroadcastCntTable 1 } Pm1004vdcMonupRmonBroadcastCntEntry ::= SEQUENCE { pm1004vdcMonupRmonBroadcastCntIndex INTEGER, pm1004vdcMonupRmonBroadcastCntValuePortn Counter64, pm1004vdcMonupRmonBroadcastCntErrorPortn EkiOnOff, pm1004vdcMonupRmonBroadcastCntOverloadPortn EkiOnOff } pm1004vdcMonupRmonBroadcastCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupRmonBroadcastCnt table " ::= { pm1004vdcMonupRmonBroadcastCntEntry 1 } pm1004vdcMonupRmonBroadcastCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port This counter gives the number of Broadcast packets received on the client port " ::= { pm1004vdcMonupRmonBroadcastCntEntry 2 } pm1004vdcMonupRmonBroadcastCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on clinet port " ::= { pm1004vdcMonupRmonBroadcastCntEntry 3 } pm1004vdcMonupRmonBroadcastCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port " ::= { pm1004vdcMonupRmonBroadcastCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupRmonMulticastCnt articles --- ********************************************************* pm1004vdcMonupRmonMulticastCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupRmonMulticastCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupRmonMulticastCnt Article " ::= { pm1004vdcMonClientRmonCounter 48 } pm1004vdcMonupRmonMulticastCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupRmonMulticastCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupRmonMulticastCnt table " INDEX { pm1004vdcMonupRmonMulticastCntIndex } ::= { pm1004vdcMonupRmonMulticastCntTable 1 } Pm1004vdcMonupRmonMulticastCntEntry ::= SEQUENCE { pm1004vdcMonupRmonMulticastCntIndex INTEGER, pm1004vdcMonupRmonMulticastCntValuePortn Counter64, pm1004vdcMonupRmonMulticastCntErrorPortn EkiOnOff, pm1004vdcMonupRmonMulticastCntOverloadPortn EkiOnOff } pm1004vdcMonupRmonMulticastCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupRmonMulticastCnt table " ::= { pm1004vdcMonupRmonMulticastCntEntry 1 } pm1004vdcMonupRmonMulticastCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port This counter gives the number of Multicast packets received on the client port " ::= { pm1004vdcMonupRmonMulticastCntEntry 2 } pm1004vdcMonupRmonMulticastCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on clinet port " ::= { pm1004vdcMonupRmonMulticastCntEntry 3 } pm1004vdcMonupRmonMulticastCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port " ::= { pm1004vdcMonupRmonMulticastCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupLineRmonByteCnt articles --- ********************************************************* pm1004vdcMonupLineRmonByteCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupLineRmonByteCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupLineRmonByteCnt Article " ::= { pm1004vdcMonClientRmonCounter 208 } pm1004vdcMonupLineRmonByteCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupLineRmonByteCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupLineRmonByteCnt table " INDEX { pm1004vdcMonupLineRmonByteCntIndex } ::= { pm1004vdcMonupLineRmonByteCntTable 1 } Pm1004vdcMonupLineRmonByteCntEntry ::= SEQUENCE { pm1004vdcMonupLineRmonByteCntIndex INTEGER, pm1004vdcMonupLineRmonByteCntValuePortn Counter64, pm1004vdcMonupLineRmonByteCntErrorPortn EkiOnOff, pm1004vdcMonupLineRmonByteCntOverloadPortn EkiOnOff } pm1004vdcMonupLineRmonByteCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupLineRmonByteCnt table " ::= { pm1004vdcMonupLineRmonByteCntEntry 1 } pm1004vdcMonupLineRmonByteCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Bytes :This counter is increased each time a data byte is received on the Line port This counter gives the number of bytes received on the Line port " ::= { pm1004vdcMonupLineRmonByteCntEntry 2 } pm1004vdcMonupLineRmonByteCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on line port " ::= { pm1004vdcMonupLineRmonByteCntEntry 3 } pm1004vdcMonupLineRmonByteCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Overload :This OID when set indicates a Bytes counter overload on line port " ::= { pm1004vdcMonupLineRmonByteCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupLineRmonCrcErrorCnt articles --- ********************************************************* pm1004vdcMonupLineRmonCrcErrorCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupLineRmonCrcErrorCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupLineRmonCrcErrorCnt Article " ::= { pm1004vdcMonClientRmonCounter 209 } pm1004vdcMonupLineRmonCrcErrorCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupLineRmonCrcErrorCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupLineRmonCrcErrorCnt table " INDEX { pm1004vdcMonupLineRmonCrcErrorCntIndex } ::= { pm1004vdcMonupLineRmonCrcErrorCntTable 1 } Pm1004vdcMonupLineRmonCrcErrorCntEntry ::= SEQUENCE { pm1004vdcMonupLineRmonCrcErrorCntIndex INTEGER, pm1004vdcMonupLineRmonCrcErrorCntValuePortn Counter64, pm1004vdcMonupLineRmonCrcErrorCntErrorPortn EkiOnOff, pm1004vdcMonupLineRmonCrcErrorCntOverloadPortn EkiOnOff } pm1004vdcMonupLineRmonCrcErrorCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupLineRmonCrcErrorCnt table " ::= { pm1004vdcMonupLineRmonCrcErrorCntEntry 1 } pm1004vdcMonupLineRmonCrcErrorCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input CRC Errors :This counter is increased each time a CRC error is detected on the Line port This counter gives the number of CRC Errors received on the Line port " ::= { pm1004vdcMonupLineRmonCrcErrorCntEntry 2 } pm1004vdcMonupLineRmonCrcErrorCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on line port " ::= { pm1004vdcMonupLineRmonCrcErrorCntEntry 3 } pm1004vdcMonupLineRmonCrcErrorCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on line port " ::= { pm1004vdcMonupLineRmonCrcErrorCntEntry 4 } --- ********************************************************* --- TABLE for the pm1004vdcMonupLineRmonPacketsCnt articles --- ********************************************************* pm1004vdcMonupLineRmonPacketsCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMonupLineRmonPacketsCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMonupLineRmonPacketsCnt Article " ::= { pm1004vdcMonClientRmonCounter 210 } pm1004vdcMonupLineRmonPacketsCntEntry OBJECT-TYPE SYNTAX Pm1004vdcMonupLineRmonPacketsCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMonupLineRmonPacketsCnt table " INDEX { pm1004vdcMonupLineRmonPacketsCntIndex } ::= { pm1004vdcMonupLineRmonPacketsCntTable 1 } Pm1004vdcMonupLineRmonPacketsCntEntry ::= SEQUENCE { pm1004vdcMonupLineRmonPacketsCntIndex INTEGER, pm1004vdcMonupLineRmonPacketsCntValuePortn Counter64, pm1004vdcMonupLineRmonPacketsCntErrorPortn EkiOnOff, pm1004vdcMonupLineRmonPacketsCntOverloadPortn EkiOnOff } pm1004vdcMonupLineRmonPacketsCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMonupLineRmonPacketsCnt table " ::= { pm1004vdcMonupLineRmonPacketsCntEntry 1 } pm1004vdcMonupLineRmonPacketsCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Packets :This counter is increased each time a packet is received on the Line port This counter gives the number of packets received on the Line port " ::= { pm1004vdcMonupLineRmonPacketsCntEntry 2 } pm1004vdcMonupLineRmonPacketsCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port " ::= { pm1004vdcMonupLineRmonPacketsCntEntry 3 } pm1004vdcMonupLineRmonPacketsCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Overload :This OID when set indicates a Packets counter overload on line port " ::= { pm1004vdcMonupLineRmonPacketsCntEntry 4 } pm1004vdcMonCountersReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "RMON Counters Reset:This OID resets and restarts all the RMON counters" ::= { pm1004vdcMonRmon 359 } pm1004vdcMonCountersStop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "RMON Counters stop:This OID stops all the RMON counters" ::= { pm1004vdcMonRmon 360 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm1004vdcMesrsynth0 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) " ::= { pm1004vdcMesrOther 0 } pm1004vdcMesrsynth1 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) " ::= { pm1004vdcMesrOther 1 } --- ********************************************************* --- TABLE for the pm1004vdcMesrtempMeas articles --- ********************************************************* pm1004vdcMesrtempMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrtempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrtempMeas Article " ::= { pm1004vdcMesrClient 16 } pm1004vdcMesrtempMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrtempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrtempMeas table " INDEX { pm1004vdcMesrtempMeasIndex } ::= { pm1004vdcMesrtempMeasTable 1 } Pm1004vdcMesrtempMeasEntry ::= SEQUENCE { pm1004vdcMesrtempMeasIndex INTEGER, pm1004vdcMesrtempMeasPortn INTEGER } pm1004vdcMesrtempMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrtempMeas table " ::= { pm1004vdcMesrtempMeasEntry 1 } pm1004vdcMesrtempMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the temperature of the client transceiver " ::= { pm1004vdcMesrtempMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrvoltMeas articles --- ********************************************************* pm1004vdcMesrvoltMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrvoltMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrvoltMeas Article " ::= { pm1004vdcMesrClient 24 } pm1004vdcMesrvoltMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrvoltMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrvoltMeas table " INDEX { pm1004vdcMesrvoltMeasIndex } ::= { pm1004vdcMesrvoltMeasTable 1 } Pm1004vdcMesrvoltMeasEntry ::= SEQUENCE { pm1004vdcMesrvoltMeasIndex INTEGER, pm1004vdcMesrvoltMeasPortn INTEGER } pm1004vdcMesrvoltMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrvoltMeas table " ::= { pm1004vdcMesrvoltMeasEntry 1 } pm1004vdcMesrvoltMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) This measure gives the 3V3 voltage of the client transceiver " ::= { pm1004vdcMesrvoltMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrbiasMeas articles --- ********************************************************* pm1004vdcMesrbiasMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrbiasMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrbiasMeas Article " ::= { pm1004vdcMesrClient 32 } pm1004vdcMesrbiasMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrbiasMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrbiasMeas table " INDEX { pm1004vdcMesrbiasMeasIndex } ::= { pm1004vdcMesrbiasMeasTable 1 } Pm1004vdcMesrbiasMeasEntry ::= SEQUENCE { pm1004vdcMesrbiasMeasIndex INTEGER, pm1004vdcMesrbiasMeasPortn INTEGER } pm1004vdcMesrbiasMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrbiasMeas table " ::= { pm1004vdcMesrbiasMeasEntry 1 } pm1004vdcMesrbiasMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This measure gives the bias of the client transceiver " ::= { pm1004vdcMesrbiasMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrtxpwrMeas articles --- ********************************************************* pm1004vdcMesrtxpwrMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrtxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrtxpwrMeas Article " ::= { pm1004vdcMesrClient 40 } pm1004vdcMesrtxpwrMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrtxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrtxpwrMeas table " INDEX { pm1004vdcMesrtxpwrMeasIndex } ::= { pm1004vdcMesrtxpwrMeasTable 1 } Pm1004vdcMesrtxpwrMeasEntry ::= SEQUENCE { pm1004vdcMesrtxpwrMeasIndex INTEGER, pm1004vdcMesrtxpwrMeasPortn INTEGER } pm1004vdcMesrtxpwrMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrtxpwrMeas table " ::= { pm1004vdcMesrtxpwrMeasEntry 1 } pm1004vdcMesrtxpwrMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Tx optical power of the client transceiver " ::= { pm1004vdcMesrtxpwrMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrrxpwrMeas articles --- ********************************************************* pm1004vdcMesrrxpwrMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrrxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrrxpwrMeas Article " ::= { pm1004vdcMesrClient 48 } pm1004vdcMesrrxpwrMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrrxpwrMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrrxpwrMeas table " INDEX { pm1004vdcMesrrxpwrMeasIndex } ::= { pm1004vdcMesrrxpwrMeasTable 1 } Pm1004vdcMesrrxpwrMeasEntry ::= SEQUENCE { pm1004vdcMesrrxpwrMeasIndex INTEGER, pm1004vdcMesrrxpwrMeasPortn INTEGER } pm1004vdcMesrrxpwrMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrrxpwrMeas table " ::= { pm1004vdcMesrrxpwrMeasEntry 1 } pm1004vdcMesrrxpwrMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Rx optical power of the client transceiver " ::= { pm1004vdcMesrrxpwrMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1LxModTempMeas articles --- ********************************************************* pm1004vdcMesrxfp1LxModTempMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1LxModTempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrxfp1LxModTempMeas Article " ::= { pm1004vdcMesrLine 208 } pm1004vdcMesrxfp1LxModTempMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1LxModTempMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrxfp1LxModTempMeas table " INDEX { pm1004vdcMesrxfp1LxModTempMeasIndex } ::= { pm1004vdcMesrxfp1LxModTempMeasTable 1 } Pm1004vdcMesrxfp1LxModTempMeasEntry ::= SEQUENCE { pm1004vdcMesrxfp1LxModTempMeasIndex INTEGER, pm1004vdcMesrxfp1LxModTempMeasPortn INTEGER } pm1004vdcMesrxfp1LxModTempMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrxfp1LxModTempMeas table " ::= { pm1004vdcMesrxfp1LxModTempMeasEntry 1 } pm1004vdcMesrxfp1LxModTempMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the temperature of the line transceiver " ::= { pm1004vdcMesrxfp1LxModTempMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1Reserved articles --- ********************************************************* pm1004vdcMesrxfp1ReservedTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1ReservedEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004vdcMesrxfp1Reserved Article " ::= { pm1004vdcMesrLine 209 } pm1004vdcMesrxfp1ReservedEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1ReservedEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004vdcMesrxfp1Reserved table " INDEX { pm1004vdcMesrxfp1ReservedIndex } ::= { pm1004vdcMesrxfp1ReservedTable 1 } Pm1004vdcMesrxfp1ReservedEntry ::= SEQUENCE { pm1004vdcMesrxfp1ReservedIndex INTEGER, pm1004vdcMesrxfp1ReservedPortn INTEGER } pm1004vdcMesrxfp1ReservedIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004vdcMesrxfp1Reserved table " ::= { pm1004vdcMesrxfp1ReservedEntry 1 } pm1004vdcMesrxfp1ReservedPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :Reserved " ::= { pm1004vdcMesrxfp1ReservedEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1LoBiasCurrentMeas articles --- ********************************************************* pm1004vdcMesrxfp1LoBiasCurrentMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1LoBiasCurrentMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrxfp1LoBiasCurrentMeas Article " ::= { pm1004vdcMesrLine 210 } pm1004vdcMesrxfp1LoBiasCurrentMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1LoBiasCurrentMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrxfp1LoBiasCurrentMeas table " INDEX { pm1004vdcMesrxfp1LoBiasCurrentMeasIndex } ::= { pm1004vdcMesrxfp1LoBiasCurrentMeasTable 1 } Pm1004vdcMesrxfp1LoBiasCurrentMeasEntry ::= SEQUENCE { pm1004vdcMesrxfp1LoBiasCurrentMeasIndex INTEGER, pm1004vdcMesrxfp1LoBiasCurrentMeasPortn INTEGER } pm1004vdcMesrxfp1LoBiasCurrentMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrxfp1LoBiasCurrentMeas table " ::= { pm1004vdcMesrxfp1LoBiasCurrentMeasEntry 1 } pm1004vdcMesrxfp1LoBiasCurrentMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This measure gives the bias of the line transceiver " ::= { pm1004vdcMesrxfp1LoBiasCurrentMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1LoTxPowerMeas articles --- ********************************************************* pm1004vdcMesrxfp1LoTxPowerMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1LoTxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrxfp1LoTxPowerMeas Article " ::= { pm1004vdcMesrLine 211 } pm1004vdcMesrxfp1LoTxPowerMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1LoTxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrxfp1LoTxPowerMeas table " INDEX { pm1004vdcMesrxfp1LoTxPowerMeasIndex } ::= { pm1004vdcMesrxfp1LoTxPowerMeasTable 1 } Pm1004vdcMesrxfp1LoTxPowerMeasEntry ::= SEQUENCE { pm1004vdcMesrxfp1LoTxPowerMeasIndex INTEGER, pm1004vdcMesrxfp1LoTxPowerMeasPortn INTEGER } pm1004vdcMesrxfp1LoTxPowerMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrxfp1LoTxPowerMeas table " ::= { pm1004vdcMesrxfp1LoTxPowerMeasEntry 1 } pm1004vdcMesrxfp1LoTxPowerMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Tx optical power of the line transceiver " ::= { pm1004vdcMesrxfp1LoTxPowerMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1LiRxPowerMeas articles --- ********************************************************* pm1004vdcMesrxfp1LiRxPowerMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1LiRxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrxfp1LiRxPowerMeas Article " ::= { pm1004vdcMesrLine 212 } pm1004vdcMesrxfp1LiRxPowerMeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1LiRxPowerMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrxfp1LiRxPowerMeas table " INDEX { pm1004vdcMesrxfp1LiRxPowerMeasIndex } ::= { pm1004vdcMesrxfp1LiRxPowerMeasTable 1 } Pm1004vdcMesrxfp1LiRxPowerMeasEntry ::= SEQUENCE { pm1004vdcMesrxfp1LiRxPowerMeasIndex INTEGER, pm1004vdcMesrxfp1LiRxPowerMeasPortn INTEGER } pm1004vdcMesrxfp1LiRxPowerMeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrxfp1LiRxPowerMeas table " ::= { pm1004vdcMesrxfp1LiRxPowerMeasEntry 1 } pm1004vdcMesrxfp1LiRxPowerMeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This measure gives the Rx optical power of the line transceiver " ::= { pm1004vdcMesrxfp1LiRxPowerMeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1LxAux1Meas articles --- ********************************************************* pm1004vdcMesrxfp1LxAux1MeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1LxAux1MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004vdcMesrxfp1LxAux1Meas Article " ::= { pm1004vdcMesrLine 213 } pm1004vdcMesrxfp1LxAux1MeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1LxAux1MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004vdcMesrxfp1LxAux1Meas table " INDEX { pm1004vdcMesrxfp1LxAux1MeasIndex } ::= { pm1004vdcMesrxfp1LxAux1MeasTable 1 } Pm1004vdcMesrxfp1LxAux1MeasEntry ::= SEQUENCE { pm1004vdcMesrxfp1LxAux1MeasIndex INTEGER, pm1004vdcMesrxfp1LxAux1MeasPortn INTEGER } pm1004vdcMesrxfp1LxAux1MeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004vdcMesrxfp1LxAux1Meas table " ::= { pm1004vdcMesrxfp1LxAux1MeasEntry 1 } pm1004vdcMesrxfp1LxAux1MeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) " ::= { pm1004vdcMesrxfp1LxAux1MeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrxfp1LxAux2Meas articles --- ********************************************************* pm1004vdcMesrxfp1LxAux2MeasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrxfp1LxAux2MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004vdcMesrxfp1LxAux2Meas Article " ::= { pm1004vdcMesrLine 214 } pm1004vdcMesrxfp1LxAux2MeasEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrxfp1LxAux2MeasEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004vdcMesrxfp1LxAux2Meas table " INDEX { pm1004vdcMesrxfp1LxAux2MeasIndex } ::= { pm1004vdcMesrxfp1LxAux2MeasTable 1 } Pm1004vdcMesrxfp1LxAux2MeasEntry ::= SEQUENCE { pm1004vdcMesrxfp1LxAux2MeasIndex INTEGER, pm1004vdcMesrxfp1LxAux2MeasPortn INTEGER } pm1004vdcMesrxfp1LxAux2MeasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004vdcMesrxfp1LxAux2Meas table " ::= { pm1004vdcMesrxfp1LxAux2MeasEntry 1 } pm1004vdcMesrxfp1LxAux2MeasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) " ::= { pm1004vdcMesrxfp1LxAux2MeasEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrotx1Aging articles --- ********************************************************* pm1004vdcMesrotx1AgingTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrotx1AgingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrotx1Aging Article " ::= { pm1004vdcMesrLine 224 } pm1004vdcMesrotx1AgingEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrotx1AgingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrotx1Aging table " INDEX { pm1004vdcMesrotx1AgingIndex } ::= { pm1004vdcMesrotx1AgingTable 1 } Pm1004vdcMesrotx1AgingEntry ::= SEQUENCE { pm1004vdcMesrotx1AgingIndex INTEGER, pm1004vdcMesrotx1AgingPortn INTEGER } pm1004vdcMesrotx1AgingIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrotx1Aging table " ::= { pm1004vdcMesrotx1AgingEntry 1 } pm1004vdcMesrotx1AgingPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) This measure gives the aging of the Line OTX TLH " ::= { pm1004vdcMesrotx1AgingEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrotx1LaserTemperature articles --- ********************************************************* pm1004vdcMesrotx1LaserTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrotx1LaserTemperatureEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " List of pm1004vdcMesrotx1LaserTemperature Article " ::= { pm1004vdcMesrLine 225 } pm1004vdcMesrotx1LaserTemperatureEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrotx1LaserTemperatureEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Row definition for the pm1004vdcMesrotx1LaserTemperature table " INDEX { pm1004vdcMesrotx1LaserTemperatureIndex } ::= { pm1004vdcMesrotx1LaserTemperatureTable 1 } Pm1004vdcMesrotx1LaserTemperatureEntry ::= SEQUENCE { pm1004vdcMesrotx1LaserTemperatureIndex INTEGER, pm1004vdcMesrotx1LaserTemperaturePortn INTEGER } pm1004vdcMesrotx1LaserTemperatureIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Index definition for the pm1004vdcMesrotx1LaserTemperature table " ::= { pm1004vdcMesrotx1LaserTemperatureEntry 1 } pm1004vdcMesrotx1LaserTemperaturePortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This measure gives the laser temperature of the Line OTX TLH " ::= { pm1004vdcMesrotx1LaserTemperatureEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrotx1FreqDeviation articles --- ********************************************************* pm1004vdcMesrotx1FreqDeviationTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrotx1FreqDeviationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrotx1FreqDeviation Article " ::= { pm1004vdcMesrLine 226 } pm1004vdcMesrotx1FreqDeviationEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrotx1FreqDeviationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrotx1FreqDeviation table " INDEX { pm1004vdcMesrotx1FreqDeviationIndex } ::= { pm1004vdcMesrotx1FreqDeviationTable 1 } Pm1004vdcMesrotx1FreqDeviationEntry ::= SEQUENCE { pm1004vdcMesrotx1FreqDeviationIndex INTEGER, pm1004vdcMesrotx1FreqDeviationPortn INTEGER } pm1004vdcMesrotx1FreqDeviationIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrotx1FreqDeviation table " ::= { pm1004vdcMesrotx1FreqDeviationEntry 1 } pm1004vdcMesrotx1FreqDeviationPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) This measure gives the frequency deviation of the Line OTX TLH " ::= { pm1004vdcMesrotx1FreqDeviationEntry 2 } --- ********************************************************* --- TABLE for the pm1004vdcMesrotx1LaserWvlength articles --- ********************************************************* pm1004vdcMesrotx1LaserWvlengthTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcMesrotx1LaserWvlengthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm1004vdcMesrotx1LaserWvlength Article " ::= { pm1004vdcMesrLine 227 } pm1004vdcMesrotx1LaserWvlengthEntry OBJECT-TYPE SYNTAX Pm1004vdcMesrotx1LaserWvlengthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm1004vdcMesrotx1LaserWvlength table " INDEX { pm1004vdcMesrotx1LaserWvlengthIndex } ::= { pm1004vdcMesrotx1LaserWvlengthTable 1 } Pm1004vdcMesrotx1LaserWvlengthEntry ::= SEQUENCE { pm1004vdcMesrotx1LaserWvlengthIndex INTEGER, pm1004vdcMesrotx1LaserWvlengthPortn INTEGER } pm1004vdcMesrotx1LaserWvlengthIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm1004vdcMesrotx1LaserWvlength table " ::= { pm1004vdcMesrotx1LaserWvlengthEntry 1 } pm1004vdcMesrotx1LaserWvlengthPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) This measure gives the laser wavelength of the Line OTX TLH " ::= { pm1004vdcMesrotx1LaserWvlengthEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- DOWNLOAD --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the restartProcess article --- ***************************************************** pm1004vdcDwlrestartProcess OBJECT IDENTIFIER ::= { pm1004vdcDwlOther 0 } pm1004vdcDwlColdRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Cold Restart :This OID indicates that the module last restart was a Cold RESTART " ::= { pm1004vdcDwlrestartProcess 2 } pm1004vdcDwlWarmRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warm Restart :This OID indicates that the module last restart was a Warm RESTART " ::= { pm1004vdcDwlrestartProcess 1 } --- ***************************************************** --- LEAF for the swBanksUsed article --- ***************************************************** pm1004vdcDwlswBanksUsed OBJECT IDENTIFIER ::= { pm1004vdcDwlOther 1 } pm1004vdcDwlSwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 This status indicates if the SW bank 2 contains SW package " ::= { pm1004vdcDwlswBanksUsed 6 } pm1004vdcDwlSwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 This status indicates if the SW bank 1 contains SW package " ::= { pm1004vdcDwlswBanksUsed 5 } pm1004vdcDwlSwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 active :This OID indicates the module is working on SW bank 2 This status indicates if the SW bank 2 is active or standby " ::= { pm1004vdcDwlswBanksUsed 2 } pm1004vdcDwlSwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 active :This OID indicates the module is working on SW bank 1 This status indicates if the SW bank 1 is active or standby " ::= { pm1004vdcDwlswBanksUsed 1 } --- ***************************************************** --- LEAF for the gwBanksUsed article --- ***************************************************** pm1004vdcDwlgwBanksUsed OBJECT IDENTIFIER ::= { pm1004vdcDwlOther 2 } pm1004vdcDwlGwBank4Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 " ::= { pm1004vdcDwlgwBanksUsed 8 } pm1004vdcDwlGwBank3Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 This status indicates if the GW bank 3 contains GW package " ::= { pm1004vdcDwlgwBanksUsed 7 } pm1004vdcDwlGwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 " ::= { pm1004vdcDwlgwBanksUsed 6 } pm1004vdcDwlGwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 This status indicates if the GW bank 1 contains GW package " ::= { pm1004vdcDwlgwBanksUsed 5 } pm1004vdcDwlGwBank4Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 active :This OID indicates the module is working on GW bank 4 " ::= { pm1004vdcDwlgwBanksUsed 4 } pm1004vdcDwlGwBank3Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 active :This OID indicates the module is working on GW bank 3 This status indicates if the GW bank 3 is active or standby " ::= { pm1004vdcDwlgwBanksUsed 3 } pm1004vdcDwlGwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 active :This OID indicates the module is working on GW bank 2 " ::= { pm1004vdcDwlgwBanksUsed 2 } pm1004vdcDwlGwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 active :This OID indicates the module is working on GW bank 1 This status indicates if the GW bank 1 is active or standby " ::= { pm1004vdcDwlgwBanksUsed 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group accessCAisCsf --- ***************************************************** pm1004vdcCfgAccessCAisCsf OBJECT IDENTIFIER ::= { pm1004vdcConfig 1 } --- ***************************************************** --- LEAF for the table 0012 --- ***************************************************** pm1004vdcCfgClientcaiscsfTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgAccessCAisCsf 1 } pm1004vdcCfgClientcaiscsfEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the accessCAisCsf table " INDEX { pm1004vdcCfgClientcaiscsfIndex } ::= { pm1004vdcCfgClientcaiscsfTable 1 } Pm1004vdcCfgClientcaiscsfEntry ::= SEQUENCE { pm1004vdcCfgClientcaiscsfIndex INTEGER, pm1004vdcCfgCAisModePortn Unsigned32, pm1004vdcCfgUpAccessioAlmPortn Unsigned32, pm1004vdcCfgUpMapperDeAlmPortn Unsigned32, pm1004vdcCfgDownAccessioAlmPortn Unsigned32, pm1004vdcCfgDownMapperDeAlmPortn Unsigned32, pm1004vdcCfgDownDfrmAlmPortn Unsigned32, pm1004vdcCfgDownLineSyncAlarmsPortn Unsigned32 } pm1004vdcCfgClientcaiscsfIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientcaiscsf table " ::= { pm1004vdcCfgClientcaiscsfEntry 1 } pm1004vdcCfgCAisModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition " ::= { pm1004vdcCfgClientcaiscsfEntry 3 } pm1004vdcCfgUpAccessioAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. " ::= { pm1004vdcCfgClientcaiscsfEntry 9 } pm1004vdcCfgUpMapperDeAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. " ::= { pm1004vdcCfgClientcaiscsfEntry 10 } pm1004vdcCfgDownAccessioAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004vdcCfgClientcaiscsfEntry 17 } pm1004vdcCfgDownMapperDeAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004vdcCfgClientcaiscsfEntry 18 } pm1004vdcCfgDownDfrmAlmPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004vdcCfgClientcaiscsfEntry 19 } pm1004vdcCfgDownLineSyncAlarmsPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. " ::= { pm1004vdcCfgClientcaiscsfEntry 20 } --- ***************************************************** --- LEAF for the table Group startup --- ***************************************************** pm1004vdcCfgStartup OBJECT IDENTIFIER ::= { pm1004vdcConfig 2 } --- ***************************************************** --- LEAF for the table 2111 --- ***************************************************** pm1004vdcCfgClientStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartup 1 } pm1004vdcCfgClientStartupEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm1004vdcCfgClientStartupIndex } ::= { pm1004vdcCfgClientStartupTable 1 } Pm1004vdcCfgClientStartupEntry ::= SEQUENCE { pm1004vdcCfgClientStartupIndex INTEGER, pm1004vdcCfgSystConfPortPortn Unsigned32, pm1004vdcCfgNetConfPortPortn Unsigned32, pm1004vdcCfgAdddropConfPortPortn Unsigned32 } pm1004vdcCfgClientStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientStartup table " ::= { pm1004vdcCfgClientStartupEntry 1 } pm1004vdcCfgSystConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm1004vdcCfgClientStartupEntry 3 } pm1004vdcCfgNetConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Protocol on Client Port :This register configures the default initialisation protocol on the port. " ::= { pm1004vdcCfgClientStartupEntry 4 } pm1004vdcCfgAdddropConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Default Add&Drop mode on Client Port :This register configures the default Add&Drop mode on the port. " ::= { pm1004vdcCfgClientStartupEntry 5 } --- ***************************************************** --- LEAF for the table 2191 --- ***************************************************** pm1004vdctablelineStartup OBJECT IDENTIFIER ::= { pm1004vdcCfgStartup 2 } pm1004vdcCfgsystConfLine1 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. " ::= { pm1004vdctablelineStartup 2 } pm1004vdcCfglineOptions1 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Active Line Port :This register configures the default options on the active line port " ::= { pm1004vdctablelineStartup 5 } pm1004vdcCfgsystConfLine2 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. " ::= { pm1004vdctablelineStartup 6 } pm1004vdcCfglineSelection OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings of active line :This register configures the start up active line. " ::= { pm1004vdctablelineStartup 7 } pm1004vdcCfglineOptions2 OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Active Line Port :This register configures the default options on the active line port " ::= { pm1004vdctablelineStartup 9 } --- ***************************************************** --- LEAF for the table 21AB --- ***************************************************** pm1004vdcCfgXfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartup 3 } pm1004vdcCfgXfpEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm1004vdcCfgXfpIndex } ::= { pm1004vdcCfgXfpTable 1 } Pm1004vdcCfgXfpEntry ::= SEQUENCE { pm1004vdcCfgXfpIndex INTEGER, pm1004vdcCfgSystConfXfpPortn Unsigned32, pm1004vdcCfgDataRateConfXfpPortn Unsigned32 } pm1004vdcCfgXfpIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the xfp table " ::= { pm1004vdcCfgXfpEntry 1 } pm1004vdcCfgSystConfXfpPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on XFP Port :This register configures the default initialisation settings on XFP port. " ::= { pm1004vdcCfgXfpEntry 3 } pm1004vdcCfgDataRateConfXfpPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " : " ::= { pm1004vdcCfgXfpEntry 4 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pm1004vdcCfgLabels OBJECT IDENTIFIER ::= { pm1004vdcConfig 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm1004vdcCfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgLabels 1 } pm1004vdcCfgLabelclientEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm1004vdcCfgLabelclientIndex } ::= { pm1004vdcCfgLabelclientTable 1 } Pm1004vdcCfgLabelclientEntry ::= SEQUENCE { pm1004vdcCfgLabelclientIndex INTEGER, pm1004vdcCfgLabelclientPortn DisplayString } pm1004vdcCfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pm1004vdcCfgLabelclientEntry 1 } pm1004vdcCfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pm1004vdcCfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pm1004vdcCfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgLabels 2 } pm1004vdcCfgLabellineEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm1004vdcCfgLabellineIndex } ::= { pm1004vdcCfgLabellineTable 1 } Pm1004vdcCfgLabellineEntry ::= SEQUENCE { pm1004vdcCfgLabellineIndex INTEGER, pm1004vdcCfgLabellinePortn DisplayString } pm1004vdcCfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pm1004vdcCfgLabellineEntry 1 } pm1004vdcCfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pm1004vdcCfgLabellineEntry 3 } --- ***************************************************** --- LEAF for the table Group startupthresholds --- ***************************************************** pm1004vdcCfgStartupthresholds OBJECT IDENTIFIER ::= { pm1004vdcConfig 4 } --- ***************************************************** --- LEAF for the table 5012 --- ***************************************************** pm1004vdcCfgClientStartupThreshTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgClientStartupThreshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupthresholds 1 } pm1004vdcCfgClientStartupThreshEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgClientStartupThreshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupthresholds table " INDEX { pm1004vdcCfgClientStartupThreshIndex } ::= { pm1004vdcCfgClientStartupThreshTable 1 } Pm1004vdcCfgClientStartupThreshEntry ::= SEQUENCE { pm1004vdcCfgClientStartupThreshIndex INTEGER, pm1004vdcCfgClientThreshtxpowhighPortn Unsigned32, pm1004vdcCfgClientThreshtxpowlowPortn Unsigned32, pm1004vdcCfgClientThreshrxpowhighPortn Unsigned32, pm1004vdcCfgClientThreshrxpowlowPortn Unsigned32 } pm1004vdcCfgClientStartupThreshIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientStartupThresh table " ::= { pm1004vdcCfgClientStartupThreshEntry 1 } pm1004vdcCfgClientThreshtxpowhighPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Tx Power high threshold :This register configures the default initialisation of the high threshold of the Transmit power on the port. " ::= { pm1004vdcCfgClientStartupThreshEntry 15 } pm1004vdcCfgClientThreshtxpowlowPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Tx Power low threshold :This register configures the default initialisation of the low threshold of the Transmit power on the port. " ::= { pm1004vdcCfgClientStartupThreshEntry 16 } pm1004vdcCfgClientThreshrxpowhighPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Rx Power high threshold :This register configures the default initialisation of the high threshold of the received power on the port. " ::= { pm1004vdcCfgClientStartupThreshEntry 19 } pm1004vdcCfgClientThreshrxpowlowPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Rx Power low threshold :This register configures the default initialisation of the low threshold of the received power on the port. " ::= { pm1004vdcCfgClientStartupThreshEntry 20 } --- ***************************************************** --- LEAF for the table 50A1 --- ***************************************************** pm1004vdcCfgLineStartupThreshTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgLineStartupThreshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupthresholds 2 } pm1004vdcCfgLineStartupThreshEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgLineStartupThreshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupthresholds table " INDEX { pm1004vdcCfgLineStartupThreshIndex } ::= { pm1004vdcCfgLineStartupThreshTable 1 } Pm1004vdcCfgLineStartupThreshEntry ::= SEQUENCE { pm1004vdcCfgLineStartupThreshIndex INTEGER, pm1004vdcCfgLineThreshtxpowhighPortn Unsigned32, pm1004vdcCfgLineThreshtxpowlowPortn Unsigned32, pm1004vdcCfgLineThreshrxpowhighPortn Unsigned32, pm1004vdcCfgLineThreshrxpowlowPortn Unsigned32 } pm1004vdcCfgLineStartupThreshIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the lineStartupThresh table " ::= { pm1004vdcCfgLineStartupThreshEntry 1 } pm1004vdcCfgLineThreshtxpowhighPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Tx Power high threshold :This register configures the default initialisation of the high threshold of the Transmit power on the line. " ::= { pm1004vdcCfgLineStartupThreshEntry 15 } pm1004vdcCfgLineThreshtxpowlowPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Tx Power low threshold :This register configures the default initialisation of the low threshold of the Transmit power on the line. " ::= { pm1004vdcCfgLineStartupThreshEntry 16 } pm1004vdcCfgLineThreshrxpowhighPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Rx Power high threshold :This register configures the default initialisation of the high threshold of the received power on the line. " ::= { pm1004vdcCfgLineStartupThreshEntry 19 } pm1004vdcCfgLineThreshrxpowlowPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Setting on Rx Power low threshold :This register configures the default initialisation of the low threshold of the received power on the line. " ::= { pm1004vdcCfgLineStartupThreshEntry 20 } --- ***************************************************** --- LEAF for the table Group startuptlh --- ***************************************************** pm1004vdcCfgStartuptlh OBJECT IDENTIFIER ::= { pm1004vdcConfig 5 } --- ***************************************************** --- LEAF for the table 25A8 --- ***************************************************** pm1004vdcCfgOtxtlhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartuptlh 1 } pm1004vdcCfgOtxtlhEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptlh table " INDEX { pm1004vdcCfgOtxtlhIndex } ::= { pm1004vdcCfgOtxtlhTable 1 } Pm1004vdcCfgOtxtlhEntry ::= SEQUENCE { pm1004vdcCfgOtxtlhIndex INTEGER, pm1004vdcCfgNuPortn Unsigned32, pm1004vdcCfgLineDitherRatePortn Unsigned32, pm1004vdcCfgLineDitherFhzPortn Unsigned32, pm1004vdcCfgLinePwrLaserPortn Unsigned32, pm1004vdcCfgLineFCurrentPortn Unsigned32, pm1004vdcCfgLineGridCurrentPortn Unsigned32, pm1004vdcCfgFPortn Unsigned32, pm1004vdcCfgReservedPortn Unsigned32, pm1004vdcCfgLinePhotodiodeModePortn Unsigned32, pm1004vdcCfgLinePhotodiodeValuePortn Unsigned32 } pm1004vdcCfgOtxtlhIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlh table " ::= { pm1004vdcCfgOtxtlhEntry 1 } pm1004vdcCfgNuPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " : " ::= { pm1004vdcCfgOtxtlhEntry 3 } pm1004vdcCfgLineDitherRatePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 4 } pm1004vdcCfgLineDitherFhzPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 5 } pm1004vdcCfgLinePwrLaserPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) " ::= { pm1004vdcCfgOtxtlhEntry 6 } pm1004vdcCfgLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 7 } pm1004vdcCfgLineGridCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 8 } pm1004vdcCfgFPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 9 } pm1004vdcCfgReservedPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " : " ::= { pm1004vdcCfgOtxtlhEntry 10 } pm1004vdcCfgLinePhotodiodeModePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 11 } pm1004vdcCfgLinePhotodiodeValuePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH " ::= { pm1004vdcCfgOtxtlhEntry 12 } --- ***************************************************** --- LEAF for the table Group startupslotslineaddtx1 --- ***************************************************** pm1004vdcCfgStartupslotslineaddtx1 OBJECT IDENTIFIER ::= { pm1004vdcConfig 6 } --- ***************************************************** --- LEAF for the table 2910 --- ***************************************************** pm1004vdcCfgSlotslineaddtx1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgSlotslineaddtx1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupslotslineaddtx1 1 } pm1004vdcCfgSlotslineaddtx1Entry OBJECT-TYPE SYNTAX Pm1004vdcCfgSlotslineaddtx1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupslotslineaddtx1 table " INDEX { pm1004vdcCfgSlotslineaddtx1Index } ::= { pm1004vdcCfgSlotslineaddtx1Table 1 } Pm1004vdcCfgSlotslineaddtx1Entry ::= SEQUENCE { pm1004vdcCfgSlotslineaddtx1Index INTEGER, pm1004vdcCfgLine1Addslotb2PortPortn Unsigned32, pm1004vdcCfgLine1Addslotb1PortPortn Unsigned32, pm1004vdcCfgLine1AddprotocolPortPortn Unsigned32 } pm1004vdcCfgSlotslineaddtx1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the slotslineaddtx1 table " ::= { pm1004vdcCfgSlotslineaddtx1Entry 1 } pm1004vdcCfgLine1Addslotb2PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Add Slot allocation (MSB) on Line1 :This register configures the start-up slots allocation on the port (MSB) " ::= { pm1004vdcCfgSlotslineaddtx1Entry 3 } pm1004vdcCfgLine1Addslotb1PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Add Slot allocation (LSB) on Line1 :This register configures the start-up slots allocation on the port (LSB) " ::= { pm1004vdcCfgSlotslineaddtx1Entry 4 } pm1004vdcCfgLine1AddprotocolPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Protocol on Line1 :This register configures the start-up protocol on the port " ::= { pm1004vdcCfgSlotslineaddtx1Entry 5 } --- ***************************************************** --- LEAF for the table Group startupslotslineaddtx2 --- ***************************************************** pm1004vdcCfgStartupslotslineaddtx2 OBJECT IDENTIFIER ::= { pm1004vdcConfig 7 } --- ***************************************************** --- LEAF for the table 2920 --- ***************************************************** pm1004vdcCfgSlotslineaddtx2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgSlotslineaddtx2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupslotslineaddtx2 1 } pm1004vdcCfgSlotslineaddtx2Entry OBJECT-TYPE SYNTAX Pm1004vdcCfgSlotslineaddtx2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupslotslineaddtx2 table " INDEX { pm1004vdcCfgSlotslineaddtx2Index } ::= { pm1004vdcCfgSlotslineaddtx2Table 1 } Pm1004vdcCfgSlotslineaddtx2Entry ::= SEQUENCE { pm1004vdcCfgSlotslineaddtx2Index INTEGER, pm1004vdcCfgLine2Addslotb2PortPortn Unsigned32, pm1004vdcCfgLine2Addslotb1PortPortn Unsigned32, pm1004vdcCfgLine2AddprotocolPortPortn Unsigned32 } pm1004vdcCfgSlotslineaddtx2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the slotslineaddtx2 table " ::= { pm1004vdcCfgSlotslineaddtx2Entry 1 } pm1004vdcCfgLine2Addslotb2PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Add Slot allocation (MSB) on Line2 :This register configures the start-up slots allocation on the port (MSB) " ::= { pm1004vdcCfgSlotslineaddtx2Entry 3 } pm1004vdcCfgLine2Addslotb1PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Add Slot allocation (LSB) on Line2 :This register configures the start-up slots allocation on the port (LSB) " ::= { pm1004vdcCfgSlotslineaddtx2Entry 4 } pm1004vdcCfgLine2AddprotocolPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Protocol on Line2 :This register configures the start-up protocol on the port " ::= { pm1004vdcCfgSlotslineaddtx2Entry 5 } --- ***************************************************** --- LEAF for the table Group startupslotslinepassthroughtx1 --- ***************************************************** pm1004vdcCfgStartupslotslinepassthroughtx1 OBJECT IDENTIFIER ::= { pm1004vdcConfig 8 } --- ***************************************************** --- LEAF for the table 2912 --- ***************************************************** pm1004vdcCfgSlotslinepassthroughtx1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgSlotslinepassthroughtx1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupslotslinepassthroughtx1 1 } pm1004vdcCfgSlotslinepassthroughtx1Entry OBJECT-TYPE SYNTAX Pm1004vdcCfgSlotslinepassthroughtx1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupslotslinepassthroughtx1 table " INDEX { pm1004vdcCfgSlotslinepassthroughtx1Index } ::= { pm1004vdcCfgSlotslinepassthroughtx1Table 1 } Pm1004vdcCfgSlotslinepassthroughtx1Entry ::= SEQUENCE { pm1004vdcCfgSlotslinepassthroughtx1Index INTEGER, pm1004vdcCfgLine1Slotb2PassthroughPortn Unsigned32, pm1004vdcCfgLine1Slotb1PassthroughPortn Unsigned32, pm1004vdcCfgLine1ProtocolPassthroughPortn Unsigned32 } pm1004vdcCfgSlotslinepassthroughtx1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the slotslinepassthroughtx1 table " ::= { pm1004vdcCfgSlotslinepassthroughtx1Entry 1 } pm1004vdcCfgLine1Slotb2PassthroughPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut PassThrough Slot allocation (MSB) on Line1 :This register configures the start-up slots allocation on the port (MSB) " ::= { pm1004vdcCfgSlotslinepassthroughtx1Entry 3 } pm1004vdcCfgLine1Slotb1PassthroughPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut PassThrough Slot allocation (LSB) on Line1 :This register configures the start-up slots allocation on the port (LSB) " ::= { pm1004vdcCfgSlotslinepassthroughtx1Entry 4 } pm1004vdcCfgLine1ProtocolPassthroughPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut PassThrough Protocol on Line1 :This register configures the start-up protocol on the port " ::= { pm1004vdcCfgSlotslinepassthroughtx1Entry 5 } --- ***************************************************** --- LEAF for the table Group startupslotslinepassthroughtx2 --- ***************************************************** pm1004vdcCfgStartupslotslinepassthroughtx2 OBJECT IDENTIFIER ::= { pm1004vdcConfig 9 } --- ***************************************************** --- LEAF for the table 2922 --- ***************************************************** pm1004vdcCfgSlotslinepassthroughtx2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgSlotslinepassthroughtx2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupslotslinepassthroughtx2 1 } pm1004vdcCfgSlotslinepassthroughtx2Entry OBJECT-TYPE SYNTAX Pm1004vdcCfgSlotslinepassthroughtx2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupslotslinepassthroughtx2 table " INDEX { pm1004vdcCfgSlotslinepassthroughtx2Index } ::= { pm1004vdcCfgSlotslinepassthroughtx2Table 1 } Pm1004vdcCfgSlotslinepassthroughtx2Entry ::= SEQUENCE { pm1004vdcCfgSlotslinepassthroughtx2Index INTEGER, pm1004vdcCfgLine2Slotb2PassthroughPortn Unsigned32, pm1004vdcCfgLine2Slotb1PassthroughPortn Unsigned32, pm1004vdcCfgLine2ProtocolPassthroughPortn Unsigned32 } pm1004vdcCfgSlotslinepassthroughtx2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the slotslinepassthroughtx2 table " ::= { pm1004vdcCfgSlotslinepassthroughtx2Entry 1 } pm1004vdcCfgLine2Slotb2PassthroughPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut PassThrough Slot allocation (MSB) on Line2 :This register configures the start-up slots allocation on the port (MSB) " ::= { pm1004vdcCfgSlotslinepassthroughtx2Entry 3 } pm1004vdcCfgLine2Slotb1PassthroughPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut PassThrough Slot allocation (LSB) on Line2 :This register configures the start-up slots allocation on the port (LSB) " ::= { pm1004vdcCfgSlotslinepassthroughtx2Entry 4 } pm1004vdcCfgLine2ProtocolPassthroughPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut PassThrough Protocol on Line2 :This register configures the start-up protocol on the port " ::= { pm1004vdcCfgSlotslinepassthroughtx2Entry 5 } --- ***************************************************** --- LEAF for the table Group startupslotslinedroprx1 --- ***************************************************** pm1004vdcCfgStartupslotslinedroprx1 OBJECT IDENTIFIER ::= { pm1004vdcConfig 10 } --- ***************************************************** --- LEAF for the table 2911 --- ***************************************************** pm1004vdcCfgSlotslinedroprx1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgSlotslinedroprx1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupslotslinedroprx1 1 } pm1004vdcCfgSlotslinedroprx1Entry OBJECT-TYPE SYNTAX Pm1004vdcCfgSlotslinedroprx1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupslotslinedroprx1 table " INDEX { pm1004vdcCfgSlotslinedroprx1Index } ::= { pm1004vdcCfgSlotslinedroprx1Table 1 } Pm1004vdcCfgSlotslinedroprx1Entry ::= SEQUENCE { pm1004vdcCfgSlotslinedroprx1Index INTEGER, pm1004vdcCfgLine1Dropslotb2PortPortn Unsigned32, pm1004vdcCfgLine1Dropslotb1PortPortn Unsigned32, pm1004vdcCfgLine1DropprotocolPortPortn Unsigned32 } pm1004vdcCfgSlotslinedroprx1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the slotslinedroprx1 table " ::= { pm1004vdcCfgSlotslinedroprx1Entry 1 } pm1004vdcCfgLine1Dropslotb2PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Drop Slot allocation (MSB) on Line1 :This register configures the start-up slots allocation on the port (MSB) " ::= { pm1004vdcCfgSlotslinedroprx1Entry 3 } pm1004vdcCfgLine1Dropslotb1PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Drop Slot allocation (LSB) on Line1 :This register configures the start-up slots allocation on the port (LSB) " ::= { pm1004vdcCfgSlotslinedroprx1Entry 4 } pm1004vdcCfgLine1DropprotocolPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Protocol on Line1 :This register configures the start-up protocol on the port " ::= { pm1004vdcCfgSlotslinedroprx1Entry 5 } --- ***************************************************** --- LEAF for the table Group startupslotslineaddrx2 --- ***************************************************** pm1004vdcCfgStartupslotslineaddrx2 OBJECT IDENTIFIER ::= { pm1004vdcConfig 11 } --- ***************************************************** --- LEAF for the table 2921 --- ***************************************************** pm1004vdcCfgSlotslinedroprx2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgSlotslinedroprx2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartupslotslineaddrx2 1 } pm1004vdcCfgSlotslinedroprx2Entry OBJECT-TYPE SYNTAX Pm1004vdcCfgSlotslinedroprx2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startupslotslineaddrx2 table " INDEX { pm1004vdcCfgSlotslinedroprx2Index } ::= { pm1004vdcCfgSlotslinedroprx2Table 1 } Pm1004vdcCfgSlotslinedroprx2Entry ::= SEQUENCE { pm1004vdcCfgSlotslinedroprx2Index INTEGER, pm1004vdcCfgLine2Dropslotb2PortPortn Unsigned32, pm1004vdcCfgLine2Dropslotb1PortPortn Unsigned32, pm1004vdcCfgLine2DropprotocolPortPortn Unsigned32 } pm1004vdcCfgSlotslinedroprx2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the slotslinedroprx2 table " ::= { pm1004vdcCfgSlotslinedroprx2Entry 1 } pm1004vdcCfgLine2Dropslotb2PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Drop Slot allocation (MSB) on Line2 :This register configures the start-up slots allocation on the port (MSB) " ::= { pm1004vdcCfgSlotslinedroprx2Entry 3 } pm1004vdcCfgLine2Dropslotb1PortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Drop Slot allocation (LSB) on Line2 :This register configures the start-up slots allocation on the port (LSB) " ::= { pm1004vdcCfgSlotslinedroprx2Entry 4 } pm1004vdcCfgLine2DropprotocolPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Defaut Protocol on Line2 :This register configures the start-up protocol on the port " ::= { pm1004vdcCfgSlotslinedroprx2Entry 5 } --- ***************************************************** --- LEAF for the table Group other --- ***************************************************** pm1004vdcCfgOther OBJECT IDENTIFIER ::= { pm1004vdcConfig 12 } --- ***************************************************** --- LEAF for the table 2300 --- ***************************************************** pm1004vdctablemoduleOther OBJECT IDENTIFIER ::= { pm1004vdcCfgOther 1 } pm1004vdcCfgmode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the startup mode of the module " ::= { pm1004vdctablemoduleOther 2 } --- ***************************************************** --- LEAF for the table Group startuptablefive --- ***************************************************** pm1004vdcCfgStartuptablefive OBJECT IDENTIFIER ::= { pm1004vdcConfig 13 } --- ***************************************************** --- LEAF for the table 0005 --- ***************************************************** pm1004vdcCfgOtxtlhcapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm1004vdcCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm1004vdcCfgStartuptablefive 1 } pm1004vdcCfgOtxtlhcapabilitiesEntry OBJECT-TYPE SYNTAX Pm1004vdcCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptablefive table " INDEX { pm1004vdcCfgOtxtlhcapabilitiesIndex } ::= { pm1004vdcCfgOtxtlhcapabilitiesTable 1 } Pm1004vdcCfgOtxtlhcapabilitiesEntry ::= SEQUENCE { pm1004vdcCfgOtxtlhcapabilitiesIndex INTEGER, pm1004vdcCfgComponentTypePortn Unsigned32, pm1004vdcCfgMiscellaneousPortn Unsigned32, pm1004vdcCfgFirstChannelPortn Unsigned32, pm1004vdcCfgLastChannelPortn Unsigned32, pm1004vdcCfgGridPortn Unsigned32 } pm1004vdcCfgOtxtlhcapabilitiesIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlhcapabilities table " ::= { pm1004vdcCfgOtxtlhcapabilitiesEntry 1 } pm1004vdcCfgComponentTypePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Component parameters :This OID defines the component parameters " ::= { pm1004vdcCfgOtxtlhcapabilitiesEntry 3 } pm1004vdcCfgMiscellaneousPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Miscellaneous default settings :This OID defines the miscellaneous parameters " ::= { pm1004vdcCfgOtxtlhcapabilitiesEntry 4 } pm1004vdcCfgFirstChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the first channel of the component :This OID defines the first channel number of the PM " ::= { pm1004vdcCfgOtxtlhcapabilitiesEntry 5 } pm1004vdcCfgLastChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the last channel of the component :This OID defines the last channel number of the PM " ::= { pm1004vdcCfgOtxtlhcapabilitiesEntry 6 } pm1004vdcCfgGridPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Grid value of the component :This OID defines the grid of the PM " ::= { pm1004vdcCfgOtxtlhcapabilitiesEntry 7 } pm1004vdcCfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pm1004vdcConfig 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pm1004vdctrapPortNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last port which generates a trap" ::= { pm1004vdctraps 2 } pm1004vdctrapLineNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Line which generates a trap" ::= { pm1004vdctraps 3 } pm1004vdctrapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pm1004vdctraps 4 } --- ***************************************************** --- LINE TRAPS --- ***************************************************** pm1004vdcLineTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmLineDdmWarningPortn, pm1004vdctrapLineNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Line Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm1004vdcAlmLineDdmWarningPortn "on", pm1004vdctrapLineNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Warning appears on Line Port $2 of PM1004VDC(LH) in Slot $3 ($A)" DESCRIPTION "Not urgent Line default is activated" ::= { pm1004vdctraps 30 } pm1004vdcLineTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmLineDdmWarningPortn, pm1004vdctrapLineNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Line Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM1004VDC Line Not Urgent ON" } --&MATCH { pm1004vdcAlmLineDdmWarningPortn "on", pm1004vdctrapLineNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Warning disappears on Line Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Not urgent Line default disappeared" ::= { pm1004vdctraps 31 } pm1004vdcLineTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmLineDdmAlmPortn, pm1004vdctrapLineNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Line Urgent ON" --&ACTIONS { log, major } --&MATCH { pm1004vdcAlmLineDdmAlmPortn "on", pm1004vdctrapLineNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Alarm appears on Line Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Urgent Line default is activated" ::= { pm1004vdctraps 32 } pm1004vdcLineTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmLineDdmAlmPortn, pm1004vdctrapLineNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Line Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM1004VDC Line Urgent ON" } --&MATCH { pm1004vdcAlmLineDdmAlmPortn "on", pm1004vdctrapLineNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Line Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Urgent Line default disappeared" ::= { pm1004vdctraps 33 } pm1004vdcLineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmLineFailPortn , pm1004vdcAlmLineHwFailPortn , pm1004vdctrapLineNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Line Fail ON" --&ACTIONS { log, critical } --&MATCH { pm1004vdcAlmLineFailPortn "on", pm1004vdcAlmLineHwFailPortn "*", pm1004vdctrapLineNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Line Port $3 Down on PM1004VDC in Slot $4 ($A)" --&FILTNAME "PM1004VDC Line HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm1004vdcAlmLineFailPortn "*", pm1004vdcAlmLineHwFailPortn "on", pm1004vdctrapLineNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Line Port $3 Down on PM1004VDC in Slot $4 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pm1004vdctraps 34 } pm1004vdcLineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmLineFailPortn , pm1004vdcAlmLineHwFailPortn , pm1004vdctrapLineNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Line Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PM1004VDC Line Fail ON" } --&MATCH { pm1004vdcAlmLineFailPortn "on", pm1004vdcAlmLineHwFailPortn "*", pm1004vdctrapLineNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Line Port $3 Up on PM1004VDC in Slot $4 ($A)" --&FILTNAME "PM1004VDC Line HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm1004vdcAlmLineFailPortn "*", pm1004vdcAlmLineHwFailPortn "on", pm1004vdctrapLineNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Line Port $3 Up on PM1004VDC in Slot $4 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pm1004vdctraps 35 } --- ***************************************************** --- CLIENT TRAPS --- ***************************************************** pm1004vdcClientTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmSfpDdmWarningPortn, pm1004vdctrapPortNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Client Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm1004vdcAlmSfpDdmWarningPortn "on", pm1004vdctrapPortNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Not urgent client default is activated" ::= { pm1004vdctraps 40 } pm1004vdcClientTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmSfpDdmWarningPortn, pm1004vdctrapPortNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Client Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM1004VDC Client Not Urgent ON" } --&MATCH { pm1004vdcAlmSfpDdmWarningPortn "on", pm1004vdctrapPortNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Not urgent client default disappeared" ::= { pm1004vdctraps 41 } pm1004vdcClientTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmSfpDdmAlmPortn, pm1004vdctrapPortNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Client Urgent ON" --&ACTIONS { log, major } --&MATCH { pm1004vdcAlmSfpDdmAlmPortn "on", pm1004vdctrapPortNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Alarm appears on Client Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Urgent client default is activated" ::= { pm1004vdctraps 42 } pm1004vdcClientTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmSfpDdmAlmPortn, pm1004vdctrapPortNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Client Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM1004VDC Client Urgent ON" } --&MATCH { pm1004vdcAlmSfpDdmAlmPortn "on", pm1004vdctrapPortNumber "$2", pm1004vdctrapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Client Port $2 of PM1004VDC in Slot $3 ($A)" DESCRIPTION "Urgent client default disappeared" ::= { pm1004vdctraps 43 } pm1004vdcClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmFailAccPortn, pm1004vdcAlmHwFailAccPortn, pm1004vdctrapPortNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Client Fail ON" --&ACTIONS { log, critical } --&MATCH { pm1004vdcAlmFailAccPortn "on", pm1004vdcAlmHwFailAccPortn "*", pm1004vdctrapPortNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Client Port $3 Down on PM1004VDC in Slot $4 ($A)" --&FILTNAME "PM1004VDC Client HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm1004vdcAlmFailAccPortn "*", pm1004vdcAlmHwFailAccPortn "on", pm1004vdctrapPortNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Client Port $3 Down on PM1004VDC in Slot $4 ($A)" DESCRIPTION "Critical client default is activated" ::= { pm1004vdctraps 44 } pm1004vdcClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmFailAccPortn, pm1004vdcAlmHwFailAccPortn, pm1004vdctrapPortNumber, pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Client Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PM1004VDC Client Fail ON" } --&MATCH { pm1004vdcAlmFailAccPortn "on", pm1004vdcAlmHwFailAccPortn "*", pm1004vdctrapPortNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Client Port $3 Up on PM1004VDC in Slot $4 ($A)" --&FILTNAME "PM1004VDC Client HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm1004vdcAlmFailAccPortn "*", pm1004vdcAlmHwFailAccPortn "on", pm1004vdctrapPortNumber "$3", pm1004vdctrapBoardNumber "$4"} --&MESG "Client Port $3 Up on PM1004VDC in Slot $4 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pm1004vdctraps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pm1004vdcPowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmDefFuseB, pm1004vdcAlmDefFuseA , pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pm1004vdcAlmDefFuseB "*", pm1004vdcAlmDefFuseA "on", pm1004vdctrapBoardNumber "$3"} --&MESG "Power Input A Fail on PM1004VDC in Slot $3 ($A)" --&FILTNAME "PM1004VDC Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pm1004vdcAlmDefFuseB "on", pm1004vdcAlmDefFuseA "*", pm1004vdctrapBoardNumber "$3"} --&MESG "Power Input B Fail on PM1004VDC in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pm1004vdctraps 50 } pm1004vdcPowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm1004vdcAlmDefFuseB, pm1004vdcAlmDefFuseA , pm1004vdctrapBoardNumber} STATUS current --&FILTNAME "PM1004VDC Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PM1004VDC Fuse A Fail ON", "PM1004VDC Fuse B Fail ON" } --&MATCH { pm1004vdcAlmDefFuseB "on", pm1004vdcAlmDefFuseA "on", pm1004vdctrapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PM1004VDC in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pm1004vdctraps 51 } END