-- ***************************************************************** -- DLINKPRIME-POE-MIB.mib : D-Link extensions to POWER-ETHERNET-MIB (PoE) -- -- Copyright (c) 2014 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKPRIME-POE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString,TruthValue FROM SNMPv2-TC pethPsePortIndex FROM POWER-ETHERNET-MIB dlinkPrimeCommon FROM DLINK-ID-REC-MIB; dlinkPrimePoeExtMIB MODULE-IDENTITY LAST-UPDATED "201404260000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "A MIB module for extending POWER-ETHERNET-MIB specified in RFC 3621. " REVISION "201404260000Z" DESCRIPTION "Initial version of this MIB module." ::= { dlinkPrimeCommon 11 } -- ----------------------------------------------------------------------------- dpPoeMIBNotifications OBJECT IDENTIFIER ::= { dlinkPrimePoeExtMIB 0 } dpPoeMIBObjects OBJECT IDENTIFIER ::= { dlinkPrimePoeExtMIB 1 } dpPoeMIBConformance OBJECT IDENTIFIER ::= { dlinkPrimePoeExtMIB 2 } ------------------------------------------------------------------------------------------------------ dpPoeIfObjects OBJECT IDENTIFIER ::= { dpPoeMIBObjects 1 } dpPoeIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DpPoeIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table consists of a list of PoE configuration information for ports." ::= { dpPoeIfObjects 1 } dpPoeIfCfgEntry OBJECT-TYPE SYNTAX DpPoeIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains PoE configuration on a port." INDEX { pethPsePortIndex } ::= { dpPoeIfCfgTable 1 } DpPoeIfCfgEntry ::= SEQUENCE { dpPoeIfState INTEGER, dpPoeIfMaxPower Integer32, dpPoeIfTimeRange DisplayString } dpPoeIfState OBJECT-TYPE SYNTAX INTEGER { auto(1), never(2), static(3), class1(4), class2(5), class3(6), class4(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the PoE state of the entry. auto(1) - the port will automatically detect the PD and provision power to the PD. The max wattage value which can be provisioned to the port is determined by dpPoeIfMaxPower. If dpPoeIfMaxPower is unspecified, then the class of the PD auto determines the maximum wattage which can be provisioned. The PD will not be provisioned if it requests more wattage than the max wattage which is determined. never(2) - indicates the port will not supply power to connected PD; static(3) - indicates manager pre-allocate power budget to the port by configuring the dpPoeIfMaxPower object. The power budget is allocated to the port even though there is no PD connected to the port. If dpPoeIfMaxPower is not configured, default value is 15400mW for 802.3af and 30000mW for 802.3at. class1(4)~class4(7) - Configures PoE port power limit. " DEFVAL {auto} ::= { dpPoeIfCfgEntry 1 } dpPoeIfMaxPower OBJECT-TYPE SYNTAX Integer32 (0 | 1000..30000) UNITS "milliwatts" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the max wattage value which can be provisioned to the port. Note: This object is valid only while the dpPoeIfState object is configured as static." ::= { dpPoeIfCfgEntry 2 } dpPoeIfTimeRange OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the name of time-range profile to delineate the activation period. A zero length string indicates the time-range is not specified." ::= { dpPoeIfCfgEntry 3 } ------------------------------------------------------------------------------------------------------ dpPoeIfInfoObjects OBJECT IDENTIFIER ::= { dpPoeIfObjects 2 } dpPoeIfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DpPoeIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table consists of a list of PoE status for ports." ::= { dpPoeIfInfoObjects 1 } dpPoeIfStatusEntry OBJECT-TYPE SYNTAX DpPoeIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consists of PoE status for a port." INDEX { pethPsePortIndex } ::= { dpPoeIfStatusTable 1 } DpPoeIfStatusEntry ::= SEQUENCE { dpPoeIfDetectStatus INTEGER, dpPoeIfFaultyType INTEGER } dpPoeIfDetectStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), searching(2), requesting(3), delivering(4), faulty(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational status of the port PD detection. disabled(1) - PSE function is disabled. searching(2) - Remote PD is not connected. requesting(3) - Remote PD is inserted, but the PSE doesn't provide power yet. delivering(4) - Remote PD is now powering by PoE system. faulty(5) - Device detection or a powered device is in a faulty state. " ::= { dpPoeIfStatusEntry 1 } dpPoeIfFaultyType OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), mpsAbsent(1), pdShort(2), overload(3), powerDenied(4), thermalShutdown(5), startupFailure(6), classificationFailure(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the specific faulty type. It is meaningful only when dpPoeIfDetectStatus object is 'faulty'. notApplicable(0) - indicates this object is meaningless, e.g. the dpPoeIfDetectStatus is not 'faulty'. mpsAbsent(1) - indicates MPS(Maintain Power Signature) Absent pdShort(2) - indicates PD Short overload(3) - indicates Overload powerDenied(4) - indicates Power Denied thermalShutdown(5)- indicates Thermal Shutdown startupFailure(6) - indicates Startup Failure classificationFailure(7) - indicates Classification Failure(IEEE 802.3at) " ::= { dpPoeIfStatusEntry 2 } ------------------------------------------------------------------------------------------------------ dpPoeIfMeasurementTable OBJECT-TYPE SYNTAX SEQUENCE OF DpPoEIfMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table consists of a list of POE measurement information for ports." ::= { dpPoeIfInfoObjects 2 } dpPoeIfMeasurementEntry OBJECT-TYPE SYNTAX DpPoEIfMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consists of PoE measurement information of a port." INDEX { pethPsePortIndex } ::= { dpPoeIfMeasurementTable 1 } DpPoEIfMeasurementEntry ::= SEQUENCE { dpPoeIfPower Integer32 } dpPoeIfPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates consumption power of port in milliwatts." ::= { dpPoeIfMeasurementEntry 1 } -- ***************************************************************************** -- MIB Notifications -- ***************************************************************************** -- ***************************************************************************** -- MIB Conformance statements -- ***************************************************************************** dpPoeMIBCompliances OBJECT IDENTIFIER ::= { dpPoeMIBConformance 1 } dpPoeMIBGroups OBJECT IDENTIFIER ::= { dpPoeMIBConformance 2 } dpPoeMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKPRIME-POE-MIB." MODULE -- this module MANDATORY-GROUPS { dpPoeGroupCfgGroup, dpPoeIfCfgGroup, dpPoeGroupInfoGroup, dpPoeIfInfoGroup, dpPoeIfErrorStateNotificationGroup } ::= { dpPoeMIBCompliances 1 } dpPoeIfCfgGroup OBJECT-GROUP OBJECTS { dpPoeIfState, dpPoeIfMaxPower, dpPoeIfTimeRange } STATUS current DESCRIPTION "A collection of objects configure or display the ports information." ::= { dpPoeMIBGroups 1 } dpPoeIfInfoGroup OBJECT-GROUP OBJECTS { dpPoeIfDetectStatus, dpPoeIfFaultyType, dpPoeIfPower } STATUS current DESCRIPTION "A collection of objects display the ports information." ::= { dpPoeMIBGroups 2 } END